D'accord avec toi apres quelques tests, neammoins j'ai beaucoup moins de "freeze". Par contre je le dis, pour les utilisateur d'une version 64bits. Il faut un maximum eviter d'installer des librairies 32bits surtout si leurs equivalences existent en 64bits. Pour ma part d'avoir fais le ménage dans ces librairies à permis de stabiliser encore plus mon systeme.

A+

En effectivement, je pense également su'il il y a un problème avec le son ou l'affichege. J'ai fais également quelques petits test, notamment sous les jeux. Et la majorité, quand on désactive le son, et quand c'est possible dans ceux ci, ils fonctionneent nickel, sinon çà plante. Serait ce le nouveau pulse qui bogguerait ?

Je vais regarder ta soluce A+

Ouep en plus opera est tres sympa 8-)

Je confirme avec firefox-32bit pas de souci. Bref Trouvant que c'est stupide d'utiliser une applie 32bits sur un systeme 64bits (de plus les librairies i386 sont tres souvant les sources de plantages sur 64bit) je vais me tourner vers Gnash (support des animation flash version <=8) qui permet quand meme de voir un max de site en Flash (pour peu que l'animation flash ne soit pas en version 9)

Pour le reste on verra à la prochaine réinstallation.

Merci
A+

Snart, j'ai suivi ton conseil,

Bon j'ai résinstaller dans l'odre : FireFox 2.0.0.10, Flash-Plugin, LibFlashSupport et enfin nsplugWrapper
puis retaper la commande mozilla-plugin-config, Ca ne marche toujours pas

PS : J'ai essayer firefox entre chaque install. Par contre je n'ai installer que les librairies 64Bits. (sauf flash-Plugin qui n'existe qu'en 64bits)

As tu installer les versions 32bit de libflashsupport, et nsplug ?
Pourrais-tu donner la procedure exacte que tu as fais, car sois je suis vraiment trop C.... ou y a un truc qui m'a echappé ?

Merci

Ok, merci, pouur cette réponse super rapide.
Je vais tout désinstaller et réinstaller

Je te tiens au courant

Merci
A+

Bonjour,
Pour moi, le support de flash na marche pas.
J'ai installer via yum dans l'ordre suivant : Flash-Plugin, LibFlashSupport, et nspluginwrapper et enfin firefox 2.0.0.10
Puis lancer la commande : "mozilla-plugin-config" (aucune ligne d'erreure ou de confitrmation en sortie)
Mais, Firefox ne trouve toujours pas Flash dans les plugins, pas de detection automatique 🙁

A la suite de quelques lecture sur ce forum :

1 - pour info, Flash-plugin c'est intallé dans /usr/lib/flash-plugin/libflashplayer.so
2 - Puis, j'ai executer la commande : "mozilla-plugin-config -i /usr/lib/flash-plugin/libflashplayer.so"
--> ce qui a créé la fichier : nswrapper.libflashplayer.so dans /usr/lib64/mozilla/plugins/
3 - Ensuite je lance firefox. Toujours pas de detection de flashplayer
4 - Je lance la commande "mozilla-plugin-config --list"
--> LibFlashplayer, n'est pas détecté
5 - Je déplace le fichier : nswrapper.libflashplayer.so dans /usr/lib64/mozilla/plugins-wrapped/ et relance "mozilla-plugin-config --list"
--> Cette fois flashplayer est détecté
6 - Je relance Firefox, et là toujours le plugin Flash n'est toujours pas détecté 🙁:hammer:

Au cas ou voila la partie du résultat de about:plugins pour NSPlug :

NPAPI Plugins Wrapper 0.9.91.5

Nom de fichier : npwrapper.so
nspluginwrapper is a cross-platform NPAPI plugin viewer, in particular for linux/i386 plugins.
This is beta software available under the terms of the GNU General Public License.

Type MIME Description Suffixes Autorisé
unknown/mime-type Do not open none Oui

Faut-il que j'installe Firefox 32Bit, ou manquerait-il un liens quelque part ?

Merci
A+

Bonjour,
Pour moi, le support de flash na marche pas.
J'ai installer via yum : Flash-Plugin, LibFlashSupport, et nspluginwrapper et enfin firefox 2.0.0.10
Puis lancer la commande : "mozilla-plugin-config" (aucune ligne d'erreure ou de confitrmation en sortie)
Mais, Firefox ne trouve toujours pas Flash dans les plugins, pas de detection automatique 🙁

Faut-il que j'installe Firefox 32Bit ?

Merci
A+

Pour Flash dans firefox. J'ai installer flag-plugin Firefox,et nsplugwrapper via yum jusque la pas de soucis
ensuit je taple la ligne "mozilla-plugin-config -i usr/lib/mozillag/plugin/libflashplayer.so pas de souci ici egalement donc çà devrait fonctionnner
Je lance firefox 2.0.10 (y paraiterait que depuis la 0.9 les plugins sont detecter tout soul ! Mon oeil ! :-D) Mais je pense serieusement que c'est du au fait que je suis en 64Bits

Diminue resolution, ???? Quid ????? c'est a quel sujet STP ? :-?
Pour pulse cf le post plus haut sur selinux :

Merci
A+

Pour ma part, depuis que j'ai les dernieres MAJ de Acpi,SELinux.... Ca bug quelque fois encore mais beaucoup moins. J'ai également désisntaller et réinstaller Firefox (mais toujours pas de prise en charge du pluginFlash :roll:). Par contre pas mal de plantage lorsque je lis de la musique (pulse bug) sauf sous VLC :-P

Merci
A+

Je suis deja en mode permissive donc, c'est bien autre choses. Merci pour les infos.

Aujourd'hui je n'est eu que 2 plantages. Ca a l'air de mieux ce passer depuis que j'ai regler une petite erreur de parametrage de ma connexion internet. En esperant que ca dure !!!😉
A+

Ok, je vais désinstaller Opera (en fait je l'ai installer car le support de flash ne fonction pas sur firefox chez moi)
Oui en effet, avec AlwaysCore, je dois declarer explicitement la souris en CorePointer, je suis entrain de rechercher des informations sur UDev et la partie Inputdevice dans Xorg pour gérer la souris.

Entre Temps, j'ai travailler en mode Root (environnement Gnome) et la pas de souci. Je suis aller faire un tour sous SELinux et là, j'ai trouver quelques explications mais je ne comprend pas tout.Car les logiciels qui font planter ; je ne les utilisait pas a ce moment.
J'emet des doute sur l'eventualiter que je suis vicitime d'une attaque via le web. Voici les messages d'erreur :

- SELinux a refusé à play d'accéder à des fichiers potentiellement mal étiquetés ---> Pourquoi "Play" ; je n'avais qu' Opera de lancer et j'etait sur une simple page HTML sans flash, ni fioritures.

et avant de désinstaller le programme ci-dessous :

- SELinux empêche /usr/bin/sox de monter le fichier ou répertoire "" (type "unconfined_tmpfs_t").
-SELinux empêche /usr/bin/sox de monter le fichier ou répertoire "/dev/shm/pulse-shm-935266702" (type "unconfined_tmpfs_t").
-SELinux empêche Xorg de monter le fichier ou répertoire "socket" (type "unconfined_t").
- SELinux empêche /usr/sbin/userhelper de monter le fichier ou répertoire "" (type "xauth_exec_t").
===> SELinux a refusé l'accès demandé par /usr/sbin/userhelper. Il n'est pas prévu que cet accès soit requis par /usr/sbin/userhelper et cet accès peut signaler une tentative d'intrusion

Voila. A votre avis ?

Rien avoir, le Freeze existait déja avant l'installation de ma tablette graphique. Donc pas de correlation. Mais sous Fedora 7, j'avais une section Inputdevice qui definissait les options de la souris, du genre "zaxemapping" et autres si je me souviens bien. Bref ces freeze sont un peu frustrant. Mais bon je n'ai pas envie de me retapper l'installation. On verra dans l'avenir comment çà se passe. Mais là, je ne trouve aucune réponse fiable pour ce se problème.

Merci
A+

Voila la reponse à la commande DMesg :

[c]
Linux version 2.6.23.1-49.fc8 (kojibuilder@xenbuilder1.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Thu Nov 8 22:14:09 EST 2007
Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet pci=nomsi,nommconf nohz=off
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 262128) 1 entries of 3200 used
end_pfn_map = 1048576
DMI 2.3 present.
ACPI: RSDP 000F8370, 0014 (r0 ACRSYS)
ACPI: RSDT 3FFF3040, 003C (r1 ACRSYS ACRPRDCT 42302E31 AWRD 0)
ACPI: FACP 3FFF30C0, 0074 (r1 ACRSYS ACRPRDCT 42302E31 AWRD 0)
ACPI: DSDT 3FFF3180, 631A (r1 ACRSYS AWRDACPI 1000 MSFT 100000E)
ACPI: FACS 3FFF0000, 0040
ACPI: SSDT 3FFF95C0, 0206 (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: HPET 3FFF9840, 0038 (r1 ACRSYS ACRPRDCT 42302E31 AWRD 98)
ACPI: SLIC 3FFF98C0, 0176 (r1 ACRSYS ACRPRDCT 42302E31 AWRD 1)
ACPI: MCFG 3FFF9A80, 003C (r1 ACRSYS ACRPRDCT 42302E31 AWRD 0)
ACPI: APIC 3FFF9500, 007C (r1 ACRSYS ACRPRDCT 42302E31 AWRD 0)
Scanning NUMA topology in Northbridge 24
CPU has 2 num_cores
No NUMA configuration found
Faking a node at 0000000000000000-000000003fff0000
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 262128) 1 entries of 3200 used
Bootmem setup node 0 0000000000000000-000000003fff0000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 262128
On node 0 totalpages: 262031
DMA zone: 56 pages used for memmap
DMA zone: 1331 pages reserved
DMA zone: 2612 pages, LIFO batch:0
DMA32 zone: 3527 pages used for memmap
DMA32 zone: 254505 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 41688 bytes of per cpu data
Built 1 zonelists in Node order. Total pages: 257117
Policy zone: DMA32
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet pci=nomsi,nommconf nohz=off
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
hpet clockevent registered
TSC calibrated against HPET
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 2209.885 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Checking aperture...
CPU 0: aperture @ 5e3c000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Memory: 1024432k/1048512k available (2442k kernel code, 23692k reserved, 1381k data, 324k init)
SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 4423.04 BogoMIPS (lpj=2211523)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
APIC timer calibration result 12556165
Detected 12.556 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4419.78 BogoMIPS (lpj=2209893)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
Brought up 2 CPUs
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=208 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2080 bytes
Time: 13:42:44 Date: 11/26/07
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:04.0
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0
ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
Time: hpet clocksource has been installed.
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
pnp: 00:01: ioport range 0x1000-0x107f has been reserved
pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
pnp: 00:01: ioport range 0x1400-0x147f has been reserved
pnp: 00:01: ioport range 0x1480-0x14ff has been reserved
pnp: 00:01: ioport range 0x1800-0x187f has been reserved
pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
pnp: 00:01: iomem range 0xfefe0000-0xfefe01ff has been reserved
pnp: 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved
pnp: 00:01: iomem range 0x0-0x0 could not be reserved
pnp: 00:0d: iomem range 0xf0000000-0xf3ffffff could not be reserved
pnp: 00:0e: iomem range 0xd0000-0xd3fff has been reserved
pnp: 00:0e: iomem range 0xf0000-0xf7fff could not be reserved
pnp: 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
pnp: 00:0e: iomem range 0xfc000-0xfffff could not be reserved
PCI: Bridge: 0000:00:04.0
IO window: c000-cfff
MEM window: fdf00000-fdffffff
PREFETCH window: fde00000-fdefffff
PCI: Bridge: 0000:00:09.0
IO window: b000-bfff
MEM window: fa000000-fcffffff
PREFETCH window: e0000000-efffffff
PCI: Bridge: 0000:00:0b.0
IO window: a000-afff
MEM window: fdd00000-fddfffff
PREFETCH window: fdc00000-fdcfffff
PCI: Bridge: 0000:00:0c.0
IO window: 9000-9fff
MEM window: fdb00000-fdbfffff
PREFETCH window: fda00000-fdafffff
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 3844k freed
audit: initializing netlink socket (disabled)
audit(1196084564.542:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key AC8B348BB0168498
- User ID: Red Hat, Inc. (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:02:00.0
PCI: Setting latency timer of device 0000:00:09.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:09.0:pcie00]
PCI: Setting latency timer of device 0000:00:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Fan [FAN] (on)
ACPI: Thermal Zone [THRM] (40 C)
Real Time Clock Driver v1.12ac
hpet_resources: 0xfeff0000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.00.00)
powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x8
powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xa
powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xc
powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
Magic number: 15:48:737
Freeing unused kernel memory: 324k freed
Write protecting the kernel read-only data: 1020k
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:02.1 -> Link [APCL] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 0
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 23, io mem 0xfe02e000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:01:05.2[C] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:01:05.2: EHCI Host Controller
ehci_hcd 0000:01:05.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:01:05.2: irq 18, io mem 0xfdffd000
ehci_hcd 0000:01:05.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe02f000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 10 ports detected
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:05.0 to 64
ohci_hcd 0000:01:05.0: OHCI Host Controller
ohci_hcd 0000:01:05.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:01:05.0: irq 16, io mem 0xfdfff000
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:01:05.1 -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:01:05.1 to 64
ohci_hcd 0000:01:05.1: OHCI Host Controller
ohci_hcd 0000:01:05.1: new USB bus registered, assigned bus number 5
ohci_hcd 0000:01:05.1: irq 17, io mem 0xfdffe000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
libata version 2.21 loaded.
sata_nv 0000:00:08.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:08.0 to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001dc00 irq 21
ata2: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001dc08 irq 21
usb 3-8: new full speed USB device using ohci_hcd and address 2
usb 3-8: configuration #1 chosen from 1 choice
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: Hitachi HDT725025VLA380, V5DOA52A, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
usb 4-2: new full speed USB device using ohci_hcd and address 2
ata2: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72502 V5DO PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 > sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
usb 4-2: configuration #1 chosen from 1 choice
usb 5-1: new low speed USB device using ohci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
input: UC-LOGIC Tablet WP8060U as /class/input/input3
input,hiddev96: USB HID v1.00 Mouse [UC-LOGIC Tablet WP8060U] on usb-0000:01:05.1-1
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
pata_amd 0000:00:06.0: version 0.3.9
PCI: Setting latency timer of device 0000:00:06.0 to 64
scsi2 : pata_amd
scsi3 : pata_amd
ata3: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001f000 irq 14
ata4: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001f008 irq 15
ata3.00: ATAPI: HL-DT-STDVD+-RW GSA-H21N, 1.00, max UDMA/33
ata3.00: configured for UDMA/33
ata4: port disabled. ignoring.
scsi 2:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-H21N 1.00 PQ: 0 ANSI: 5
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security: 8 users, 11 roles, 2359 types, 112 bools, 1 sens, 1024 cats
security: 67 classes, 212240 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1196084573.386:2): policy loaded auid=4294967295
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 2:0:0:0: Attached scsi generic sg1 type 5
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
input: Power Button (FF) as /class/input/input4
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input5
ACPI: Power Button (CM) [PWRB]
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0xf400
input: PC Speaker as /class/input/input6
ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC6] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.0 to 64
sky2 0000:03:00.0: v1.18 addr 0xfddfc000 irq 16 Yukon-EC Ultra (0xb4) rev 2
sky2 eth0: addr 00:19:21:51:54:82
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:01:09.0 to 64
firewire_ohci: Added fw-ohci device 0000:01:09.0, OHCI version 1.10
usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
usbcore: registered new interface driver usblp
nvidia: module license 'NVIDIA' taints kernel.
firewire_core: created new fw device fw0 (0 config rom retries, S400)
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC8] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.19 Wed Sep 12 14:08:38 PDT 2007
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:05.0 -> Link [AAZA] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:05.0 to 64
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
usb-storage: device scan complete
scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:1: [sdc] Attached SCSI removable disk
sd 4:0:0:1: Attached scsi generic sg3 type 0
sd 4:0:0:2: [sdd] Attached SCSI removable disk
sd 4:0:0:2: Attached scsi generic sg4 type 0
sd 4:0:0:3: [sde] Attached SCSI removable disk
sd 4:0:0:3: Attached scsi generic sg5 type 0
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
device-mapper: multipath: version 1.0.5 loaded
loop: module loaded
EXT3 FS on dm-0, internal journal
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda3, type ext3), uses xattr
fuse init (API version 7.8)
SELinux: initialized (dev sda1, type fuseblk), uses genfs_contexts
SELinux: initialized (dev sda5, type fuseblk), uses genfs_contexts
Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:2031608k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
ip6_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
PPP generic driver version 2.4.2
eth0: no IPv6 routers present
audit(1196081069.472:3): audit_pid=7941 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
operapluginwrap[8886]: segfault at 00000000000004d1 rip 0000000000532e56 rsp 00000000ffcae8b0 error 4
operapluginwrap[8903]: segfault at 00000000000004d1 rip 0000000000532e56 rsp 00000000ffd130f0 error 4
operapluginwrap[8913]: segfault at 00000000000004d1 rip 0000000000532e56 rsp 00000000ffc8ce60 error 4
operapluginwrap[8921]: segfault at 00000000000004d1 rip 0000000000532e56 rsp 00000000ffc18df0 error 4
operapluginwrap[8930]: segfault at 00000000000004d1 rip 0000000000532e56 rsp 00000000ff974b40 error 4
operapluginwrap[8938]: segfault at 00000000000004d1 rip 0000000000532e56 rsp 00000000ffc7c360 error 4
operapluginwrap[8947]: segfault at 00000000000004d1 rip 0000000000532e56 rsp 00000000ffde3fb0 error 4
operapluginwrap[8954]: segfault at 00000000000004d1 rip 0000000000532e56 rsp 00000000ff8c2a90 error 4
operapluginwrap[8963]: segfault at 00000000000004d1 rip 0000000000532e56 rsp 00000000ffc72e40 error 4
[/c]

A+

PS : Attention j'ai fais du copier coller n'importe comment Argg !!!! :-D:hammer:

Merci

Pour repondre a vos questions :

Ma machine : AMD 64x2 4400 - 1go Ram - HD Sata 250go - NVidia 7300 gs 256Mo

- Les effets de bureaux ne sont pas activés car j'ai branché ma tv sur la sortie video (et ce n'est pas compatible)
- Pour ce qui est du Xorg aucun Inpudevice n'est definie pour ma souris, et j'ai juste rajouté le support de ma tablette graphique il y 2 jours (mais bon ça Freezait deja avant)

Voila quand meme mon Xorg.conf :

Section "ServerLayout"
Identifier "Dual head configuration"

Screen 0 "Screen0" 0 0
Screen 1 "tv" RightOf "Screen0"

InputDevice "Keyboard0" "CoreKeyboard"
#InputDevice "WizardPen Tablet" "AlwaysCore" avec cette ligne ca bug
InputDevice "WizardPen Tablet" "CorePointer"
EndSection

les erreurs dmesg, je les trouve ou ? (dans /var/log ?)

Merci

A+
Section "Files"
ModulePath "/usr/lib64/xorg/modules/extensions/nvidia"
ModulePath "/usr/lib64/xorg/modules"
ModulePath "/usr/lib64/modules/input"
EndSection

Section "ServerFlags"
Option "AIGLX" "on"
Option "Xinerama" "1"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection

Section "InputDevice"
Identifier "WizardPen Tablet"
Option "SendCoreEvents" "true"
Driver "wizardpen"
Option "Device" "/dev/input/tablet"
Option "TopX" "1193"
Option "TopY" "2249"
Option "BottomX" "31857"
Option "BottomY" "32312"
Option "MaxX" "31857"
Option "MaxY" "32312"
EndSection


Section "Monitor"
Identifier "Monitor0"
ModelName "Monitor 1280x1024"
HorizSync 31.5 - 79.0
VertRefresh 50.0 - 90.0
Option "dpms"
EndSection

Section "Monitor"
Identifier "tv_Monitor"
VendorName "Sony"
ModelName "PAL tv"
HorizSync 30.0 - 50.0
VertRefresh 60.0 - 60.0
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7300 GS"
Option "TripleBuffer" "true"
Option "AddARGBGLXVisuals" "True"
BusID "PCI:2:0:0"
EndSection

Section "Device"
Identifier "tv_Device"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7300 GS"
Option "NoLogo" "true"
Option "ConnectedMonitor" "tv"
Option "tvStandard" "PAL-N" # Valable en France
Option "AddARGBGLXVisuals" "True"
BusID "PCI:2:0:0"
Screen 1
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "metamodes" "CRT: 1280x960 +0+0"
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x960" "1280x800" "1280x720" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "Screen"
Identifier "tv"
Device "tv_Device"
Monitor "tv_Monitor"
DefaultDepth 24
Option "TwinView" "1"
Option "metamodes" "TV: 1024x768 +0+0"
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection

J'utilise la 2.6.23.1-49.fc8 mais avac la 2.6.23.1-42.fc8, j'avais déja le problème. Quid ????
Je soupsonne quand même un bug au niveau de la souris, car majoritairement çà freeze 10x plus quand j'utilise la molette.

Bonjour a tous, apres avoir lu les sujet de freeze (souris+clavier) sur ce forum, j'ai suivi tous les conseils (desactivation de cpuspeed, acpi...) bref çà freeze toujours autant aleatoirement. Bref j'ai peut-être quelques piste à confirmer :
- Sous FC7 j'avais formaté en ext2fs et pas de plantage sous FC8 je suis en Ext3fs et ca freeze tres aleatoirement
- Lorsque une clef USB est pluggee ca freeze plus souvent
- Lorsque je navigue sur internet (avec opera, firefox, konqueror) et notamment sur les sites comportant des animmlations flash, c'est idem qu'au dessus

Bref en gros voila. Dans tous les cas, c'est tres frustrant d'être obliger de sauvegarder ses documents toutes les 30 secondes et de faire des "Hard Reboot" 🙁 .

Ah! j'allais oublier dans le Xorg.conf aucune section definissant la souris est présente; peut-être qu'en rajoutant une section ca serait la solution ???. Je vais tester quand j'aurait trouvé plus de renseignement sur "udev"

En attendant la prochaine version du noyeau 2.6.24.xx

A+

Si c'est des disques en NTFS fais une recheche et essaye "nfts-config", si non tu peus te créer des fichiers script avec les commandes mount/unmount

A+

Il faut que tu recupere les modules xine-extra-nonfree et autres depuis le depot "livna" et tu pourra tout lire (divx, xvid, mpeg, wmv etc....

Essaye "SMPlayer" disponible sur kde-apps.org c'est une interface pour mplayer bien mieux que kplayer (pour moi)

A+