tba44

  • 1 déc. 2010
  • Inscrit 26 mars 2008
  • 0 meilleure réponse
  • Petit nouveau
  • Dans Problèmes divers internet et FireFox suite mise à jour
    nouvo09 wrote:D'accord, alors s'il n'y a plus de souci, tout va bien ?
    J'ai toujours une impossibilité de me connecter à un forum via FireFox (mais c'est peut être lié à FireFox uniquement et pas à ma mise à jour)
    Et pour l'horloge j'ai contourné le problème.

    Mais effectivement ça n'est pas un gros problème 😉
    nouvo09 wrote:
    Added default wired connection 'Auto vboxnet0'
    Ta Fedora tourne dans une machine virtuelle ?
    Non. Mon Fedora 11 est la machine physique. J'utilise VirtualBox pour XP (mais je ne l'avais pas lancé lors de mes manips)

    TBA
  • Dans Problèmes divers internet et FireFox suite mise à jour
    OK. D'abord les nouvelles :

    - aMSN fonctionne de nouveau, sans raison ni explication particulière.
    - Mon heure est ok maintenant que j'ai enlevé la synchro automatique.

    J'ai un peu du mal à trouver mes petits dans le fichier /var/log/messages
    Je met l'ensemble de mon dernier boot, en vrac :
    Jun 26 12:32:19 ANTEC init: tty6 main process (2206) killed by TERM signal
Jun 26 12:32:19 ANTEC init: tty2 main process (2204) killed by TERM signal
Jun 26 12:32:19 ANTEC init: tty3 main process (2205) killed by TERM signal
Jun 26 12:32:19 ANTEC init: tty4 main process (2202) killed by TERM signal
Jun 26 12:32:19 ANTEC init: tty5 main process (2203) killed by TERM signal
Jun 26 12:32:19 ANTEC avahi-daemon[1795]: Got SIGTERM, quitting.
Jun 26 12:32:19 ANTEC avahi-daemon[1795]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.0.2.
Jun 26 12:32:20 ANTEC xinetd[2124]: Exiting...
Jun 26 12:32:20 ANTEC acpid: exiting
Jun 26 12:32:20 ANTEC NetworkManager: <info>  HAL disappeared
Jun 26 12:32:20 ANTEC pcscd: pcscdaemon.c:581:signal_trap() Preparing for suicide
Jun 26 12:32:21 ANTEC pcscd: readerfactory.c:1242:RFCleanupReaders() entering cleaning function
Jun 26 12:32:21 ANTEC pcscd: pcscdaemon.c:531:at_exit() cleaning /var/run
Jun 26 12:32:22 ANTEC bluetoothd[2095]: bridge pan0 removed
Jun 26 12:32:22 ANTEC bluetoothd[2095]: Stopping SDP server
Jun 26 12:32:22 ANTEC bluetoothd[2095]: Exit
Jun 26 12:32:22 ANTEC rpc.statd[2028]: Caught signal 15, un-registering and exiting.
Jun 26 12:32:22 ANTEC NetworkManager: <WARN>  nm_signal_handler(): Caught signal 15, shutting down normally.
Jun 26 12:32:22 ANTEC NetworkManager: <info>  (eth0): now unmanaged
Jun 26 12:32:22 ANTEC NetworkManager: <info>  (eth0): device state change: 8 -> 1 (reason 36)
Jun 26 12:32:22 ANTEC NetworkManager: <info>  (eth0): deactivating device (reason: 36).
Jun 26 12:32:22 ANTEC NetworkManager: <info>  eth0: canceled DHCP transaction, dhcp client pid 2221
Jun 26 12:32:22 ANTEC NetworkManager: <WARN>  check_one_route(): (eth0) error -34 returned from rtnl_route_del(): Sucess#012
Jun 26 12:32:22 ANTEC NetworkManager: <info>  (eth0): cleaning up...
Jun 26 12:32:22 ANTEC NetworkManager: <info>  (eth0): taking down device.
Jun 26 12:32:22 ANTEC NetworkManager: <info>  exiting (success)
Jun 26 12:32:23 ANTEC nm-dispatcher.action: Disconnected from the system bus, exiting.
Jun 26 12:32:23 ANTEC nm-system-settings: disconnected from the system bus, exiting.
Jun 26 12:32:23 ANTEC rpcbind: rpcbind terminating on signal. Restart with "rpcbind -w"
Jun 26 12:32:23 ANTEC auditd[1717]: Error sending signal_info request (Operation not supported)
Jun 26 12:32:23 ANTEC auditd[1717]: The audit daemon is exiting.
Jun 26 12:32:23 ANTEC kernel: audit(1277548343.675:39): audit_pid=0 old=1717 auid=4294967295 ses=4294967295 res=1
Jun 26 12:32:23 ANTEC kernel: Kernel logging (proc) stopped.
Jun 26 12:33:27 ANTEC kernel: imklog 3.22.1, log source = /proc/kmsg started.
Jun 26 12:33:27 ANTEC kernel: Initializing cgroup subsys cpuset
Jun 26 12:33:27 ANTEC kernel: Initializing cgroup subsys cpu
Jun 26 12:33:27 ANTEC kernel: Linux version 2.6.30.10-105.2.23.fc11.x86_64 (mockbuild@x86-01.phx2.fedoraproject.org) (gcc version 4.4.1 20090725 (Red Ha
t 4.4.1-2) (GCC) ) #1 SMP Thu Feb 11 07:06:34 UTC 2010
Jun 26 12:33:27 ANTEC kernel: Command line: ro root=UUID=a75401a6-26a7-4826-a04e-ef2603d83ea7 rhgb quiet
Jun 26 12:33:27 ANTEC kernel: KERNEL supported cpus:
Jun 26 12:33:27 ANTEC kernel:  Intel GenuineIntel
Jun 26 12:33:27 ANTEC kernel:  AMD AuthenticAMD
Jun 26 12:33:27 ANTEC kernel:  Centaur CentaurHauls
Jun 26 12:33:27 ANTEC kernel: BIOS-provided physical RAM map:
Jun 26 12:33:27 ANTEC kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Jun 26 12:33:27 ANTEC kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Jun 26 12:33:27 ANTEC kernel: BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Jun 26 12:33:27 ANTEC kernel: BIOS-e820: 0000000000100000 - 000000007ff90000 (usable)
Jun 26 12:33:27 ANTEC kernel: BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data)
Jun 26 12:33:27 ANTEC kernel: BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS)
Jun 26 12:33:27 ANTEC kernel: BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
Jun 26 12:33:27 ANTEC kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Jun 26 12:33:27 ANTEC kernel: BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Jun 26 12:33:27 ANTEC kernel: BIOS-e820: 0000000100000000 - 0000000180000000 (usable)
Jun 26 12:33:27 ANTEC kernel: DMI 2.4 present.
Jun 26 12:33:27 ANTEC kernel: AMI BIOS detected: BIOS may corrupt low RAM, working around it.
Jun 26 12:33:27 ANTEC kernel: last_pfn = 0x180000 max_arch_pfn = 0x100000000
Jun 26 12:33:27 ANTEC kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Jun 26 12:33:27 ANTEC kernel: total RAM coverred: 4096M
Jun 26 12:33:27 ANTEC kernel: Found optimal setting for mtrr clean up
Jun 26 12:33:27 ANTEC kernel: gran_size: 64K    chunk_size: 64K         num_reg: 2      lose cover RAM: 0G
Jun 26 12:33:27 ANTEC kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Jun 26 12:33:27 ANTEC kernel: last_pfn = 0x7ff90 max_arch_pfn = 0x100000000
Jun 26 12:33:27 ANTEC kernel: init_memory_mapping: 0000000000000000-000000007ff90000
Jun 26 12:33:27 ANTEC kernel: init_memory_mapping: 0000000100000000-0000000180000000
Jun 26 12:33:27 ANTEC kernel: RAMDISK: 37ce6000 - 37fef61b
Jun 26 12:33:27 ANTEC kernel: ACPI: RSDP 00000000000fa9b0 00014 (v00 ACPIAM)
Jun 26 12:33:27 ANTEC kernel: ACPI: RSDT 000000007ff90000 00038 (v01 MSTEST TESTONLY 11000701 MSFT 00000097)
Jun 26 12:33:27 ANTEC kernel: ACPI: FACP 000000007ff90200 00084 (v02 MSTEST OEMFACP  11000701 MSFT 00000097)
Jun 26 12:33:27 ANTEC kernel: ACPI: DSDT 000000007ff905c0 08FA9 (v01  A0637 A0637000 00000000 INTL 20060113)
Jun 26 12:33:27 ANTEC kernel: ACPI: FACS 000000007ff9e000 00040
Jun 26 12:33:27 ANTEC kernel: ACPI: APIC 000000007ff90390 0006C (v01 MSTEST OEMAPIC  11000701 MSFT 00000097)
Jun 26 12:33:27 ANTEC kernel: ACPI: MCFG 000000007ff90400 0003C (v01 MSTEST OEMMCFG  11000701 MSFT 00000097)
Jun 26 12:33:27 ANTEC kernel: ACPI: OEMB 000000007ff9e040 0007B (v01 MSTEST AMI_OEM  11000701 MSFT 00000097)
Jun 26 12:33:27 ANTEC kernel: ACPI: HPET 000000007ff99570 00038 (v01 MSTEST OEMHPET  11000701 MSFT 00000097)
Jun 26 12:33:27 ANTEC kernel: No NUMA configuration found
Jun 26 12:33:27 ANTEC kernel: Faking a node at 0000000000000000-0000000180000000
Jun 26 12:33:27 ANTEC kernel: Bootmem setup node 0 0000000000000000-0000000180000000
Jun 26 12:33:27 ANTEC kernel:  NODE_DATA [0000000000014000 - 0000000000028fff]
Jun 26 12:33:27 ANTEC kernel:  bootmap [0000000000029000 -  0000000000058fff] pages 30
Jun 26 12:33:27 ANTEC kernel: (8 early reservations) ==> bootmem [0000000000 - 0180000000]
Jun 26 12:33:27 ANTEC kernel:  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Jun 26 12:33:27 ANTEC kernel:  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
Jun 26 12:33:27 ANTEC kernel:  #2 [0000200000 - 0000b051a0]    TEXT DATA BSS ==> [0000200000 - 0000b051a0]
Jun 26 12:33:27 ANTEC kernel:  #3 [0037ce6000 - 0037fef61b]          RAMDISK ==> [0037ce6000 - 0037fef61b]
Jun 26 12:33:27 ANTEC kernel:  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
Jun 26 12:33:27 ANTEC kernel:  #5 [0000b06000 - 0000b0628c]              BRK ==> [0000b06000 - 0000b0628c]
Jun 26 12:33:27 ANTEC kernel:  #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
Jun 26 12:33:27 ANTEC kernel:  #7 [0000012000 - 0000014000]          PGTABLE ==> [0000012000 - 0000014000]
Jun 26 12:33:27 ANTEC kernel: found SMP MP-table at [ffff8800000ff780] ff780
Jun 26 12:33:27 ANTEC kernel: Zone PFN ranges:
Jun 26 12:33:27 ANTEC kernel:  DMA      0x00000010 -> 0x00001000
Jun 26 12:33:27 ANTEC kernel:  DMA32    0x00001000 -> 0x00100000
Jun 26 12:33:27 ANTEC kernel:  Normal   0x00100000 -> 0x00180000
Jun 26 12:33:27 ANTEC kernel: Movable zone start PFN for each node
Jun 26 12:33:27 ANTEC kernel: early_node_map[3] active PFN ranges
Jun 26 12:33:27 ANTEC kernel:    0: 0x00000010 -> 0x0000009f
Jun 26 12:33:27 ANTEC kernel:    0: 0x00000100 -> 0x0007ff90
Jun 26 12:33:27 ANTEC kernel:    0: 0x00100000 -> 0x00180000
Jun 26 12:33:27 ANTEC kernel: ACPI: PM-Timer IO Port: 0x808
Jun 26 12:33:27 ANTEC kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Jun 26 12:33:27 ANTEC kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Jun 26 12:33:27 ANTEC kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
Jun 26 12:33:27 ANTEC kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
Jun 26 12:33:27 ANTEC kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Jun 26 12:33:27 ANTEC kernel: IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
Jun 26 12:33:27 ANTEC kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jun 26 12:33:27 ANTEC kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jun 26 12:33:27 ANTEC kernel: Using ACPI (MADT) for SMP configuration information
Jun 26 12:33:27 ANTEC kernel: ACPI: HPET id: 0x8086a202 base: 0xfed00000
Jun 26 12:33:27 ANTEC kernel: SMP: Allowing 4 CPUs, 2 hotplug CPUs
Jun 26 12:33:27 ANTEC kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Jun 26 12:33:27 ANTEC kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
Jun 26 12:33:27 ANTEC kernel: PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Jun 26 12:33:27 ANTEC kernel: PM: Registered nosave memory: 000000007ff90000 - 000000007ff9e000
Jun 26 12:33:27 ANTEC kernel: PM: Registered nosave memory: 000000007ff9e000 - 000000007ffe0000
Jun 26 12:33:27 ANTEC kernel: PM: Registered nosave memory: 000000007ffe0000 - 0000000080000000
Jun 26 12:33:27 ANTEC kernel: PM: Registered nosave memory: 0000000080000000 - 00000000fee00000
Jun 26 12:33:27 ANTEC kernel: PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
Jun 26 12:33:27 ANTEC kernel: PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
Jun 26 12:33:27 ANTEC kernel: PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
Jun 26 12:33:27 ANTEC kernel: Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
Jun 26 12:33:27 ANTEC kernel: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
Jun 26 12:33:27 ANTEC kernel: PERCPU: Embedded 27 pages at ffff880028028000, static data 79584 bytes
Jun 26 12:33:27 ANTEC kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1024435
Jun 26 12:33:27 ANTEC kernel: Policy zone: Normal
Jun 26 12:33:27 ANTEC kernel: Kernel command line: ro root=UUID=a75401a6-26a7-4826-a04e-ef2603d83ea7 rhgb quiet
Jun 26 12:33:27 ANTEC kernel: Initializing CPU#0
Jun 26 12:33:27 ANTEC kernel: NR_IRQS:4352 nr_irqs:440
Jun 26 12:33:27 ANTEC kernel: PID hash table entries: 4096 (order: 12, 32768 bytes)
Jun 26 12:33:27 ANTEC kernel: Fast TSC calibration using PIT
Jun 26 12:33:27 ANTEC kernel: Detected 1868.067 MHz processor.
Jun 26 12:33:27 ANTEC kernel: Console: colour VGA+ 80x25
Jun 26 12:33:27 ANTEC kernel: console [tty0] enabled
Jun 26 12:33:27 ANTEC kernel: allocated 41943040 bytes of page_cgroup
Jun 26 12:33:27 ANTEC kernel: please try cgroup_disable=memory option if you don't want
Jun 26 12:33:27 ANTEC kernel: Checking aperture...
Jun 26 12:33:27 ANTEC kernel: No AGP bridge found
Jun 26 12:33:27 ANTEC kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Jun 26 12:33:27 ANTEC kernel: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
Jun 26 12:33:27 ANTEC kernel: software IO TLB at phys 0x20000000 - 0x24000000
Jun 26 12:33:27 ANTEC kernel: Memory: 4015964k/6291456k available (3972k kernel code, 2098052k absent, 177440k reserved, 2498k data, 1292k init)
Jun 26 12:33:27 ANTEC kernel: SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Jun 26 12:33:27 ANTEC kernel: HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Jun 26 12:33:27 ANTEC kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 3736.13 BogoMIPS (lpj=1868067)
Jun 26 12:33:27 ANTEC kernel: Security Framework initialized
Jun 26 12:33:27 ANTEC kernel: SELinux:  Initializing.
Jun 26 12:33:27 ANTEC kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Jun 26 12:33:27 ANTEC kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Jun 26 12:33:27 ANTEC kernel: Mount-cache hash table entries: 256
Jun 26 12:33:27 ANTEC kernel: Initializing cgroup subsys ns
Jun 26 12:33:27 ANTEC kernel: Initializing cgroup subsys cpuacct
Jun 26 12:33:27 ANTEC kernel: Initializing cgroup subsys memory
Jun 26 12:33:27 ANTEC kernel: Initializing cgroup subsys devices
Jun 26 12:33:27 ANTEC kernel: Initializing cgroup subsys freezer
Jun 26 12:33:27 ANTEC kernel: Initializing cgroup subsys net_cls
Jun 26 12:33:27 ANTEC kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Jun 26 12:33:27 ANTEC kernel: CPU: L2 cache: 2048K
Jun 26 12:33:27 ANTEC kernel: CPU 0/0x0 -> Node 0
Jun 26 12:33:27 ANTEC kernel: CPU: Physical Processor ID: 0
Jun 26 12:33:27 ANTEC kernel: CPU: Processor Core ID: 0
Jun 26 12:33:27 ANTEC kernel: CPU0: Thermal monitoring enabled (TM2)
Jun 26 12:33:27 ANTEC kernel: using mwait in idle threads.
Jun 26 12:33:27 ANTEC kernel: ACPI: Core revision 20090320
Jun 26 12:33:27 ANTEC kernel: ftrace: converting mcount calls to 0f 1f 44 00 00
Jun 26 12:33:27 ANTEC kernel: ftrace: allocating 19360 entries in 76 pages
Jun 26 12:33:27 ANTEC kernel: Failed to register trace ftrace module notifier
Jun 26 12:33:27 ANTEC kernel: Setting APIC routing to flat
Jun 26 12:33:27 ANTEC kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Jun 26 12:33:27 ANTEC kernel: CPU0: Intel(R) Core(TM)2 CPU          6300  @ 1.86GHz stepping 06
Jun 26 12:33:27 ANTEC kernel: Booting processor 1 APIC 0x1 ip 0x6000
Jun 26 12:33:27 ANTEC kernel: Initializing CPU#1
Jun 26 12:33:27 ANTEC kernel: Calibrating delay using timer specific routine.. 3736.16 BogoMIPS (lpj=1868080)
Jun 26 12:33:27 ANTEC kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Jun 26 12:33:27 ANTEC kernel: CPU: L2 cache: 2048K
Jun 26 12:33:27 ANTEC kernel: CPU 1/0x1 -> Node 0
Jun 26 12:33:27 ANTEC kernel: CPU: Physical Processor ID: 0
Jun 26 12:33:27 ANTEC kernel: CPU: Processor Core ID: 1
Jun 26 12:33:27 ANTEC kernel: CPU1: Thermal monitoring enabled (TM2)
Jun 26 12:33:27 ANTEC kernel: x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
Jun 26 12:33:27 ANTEC kernel: CPU1: Intel(R) Core(TM)2 CPU          6300  @ 1.86GHz stepping 06
Jun 26 12:33:27 ANTEC kernel: checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Jun 26 12:33:27 ANTEC kernel: Brought up 2 CPUs
Jun 26 12:33:27 ANTEC kernel: Total of 2 processors activated (7472.29 BogoMIPS).
Jun 26 12:33:27 ANTEC kernel: net_namespace: 1952 bytes
Jun 26 12:33:27 ANTEC kernel: Booting paravirtualized kernel on bare hardware
Jun 26 12:33:27 ANTEC kernel: regulator: core version 0.5
Jun 26 12:33:27 ANTEC kernel: Time: 10:33:03  Date: 06/26/10
Jun 26 12:33:27 ANTEC kernel: NET: Registered protocol family 16
Jun 26 12:33:27 ANTEC kernel: ACPI: bus type pci registered
Jun 26 12:33:27 ANTEC kernel: PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Jun 26 12:33:27 ANTEC kernel: PCI: Not using MMCONFIG.
Jun 26 12:33:27 ANTEC kernel: PCI: Using configuration type 1 for base access
Jun 26 12:33:27 ANTEC kernel: bio: create slab <bio-0> at 0
Jun 26 12:33:27 ANTEC kernel: ACPI: Interpreter enabled
Jun 26 12:33:27 ANTEC kernel: ACPI: (supports S0 S1 S3 S4 S5)
Jun 26 12:33:27 ANTEC kernel: ACPI: Using IOAPIC for interrupt routing
Jun 26 12:33:27 ANTEC kernel: PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Jun 26 12:33:27 ANTEC kernel: PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
Jun 26 12:33:27 ANTEC kernel: PCI: Using MMCONFIG at e0000000 - efffffff
Jun 26 12:33:27 ANTEC kernel: ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - EF, should be EA [20090320]
Jun 26 12:33:27 ANTEC kernel: ACPI: No dock devices found.
Jun 26 12:33:27 ANTEC kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:01.0: PME# disabled
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1a.7: PME# disabled
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1b.0: PME# disabled
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1c.0: PME# disabled
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1c.3: PME# disabled
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1c.4: PME# disabled
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1d.7: PME# disabled
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1f.2: PME# supported from D3hot
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1f.2: PME# disabled
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1f.5: PME# supported from D3hot
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1f.5: PME# disabled
Jun 26 12:33:27 ANTEC kernel: pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
Jun 26 12:33:27 ANTEC kernel: pci 0000:03:00.0: PME# supported from D3hot D3cold
Jun 26 12:33:27 ANTEC kernel: pci 0000:03:00.0: PME# disabled
Jun 26 12:33:27 ANTEC kernel: pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
Jun 26 12:33:27 ANTEC kernel: pci 0000:02:00.0: PME# supported from D3hot
Jun 26 12:33:27 ANTEC kernel: pci 0000:02:00.0: PME# disabled
Jun 26 12:33:27 ANTEC kernel: pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
Jun 26 12:33:27 ANTEC kernel: pci 0000:05:01.0: PME# supported from D0 D2 D3hot D3cold
Jun 26 12:33:27 ANTEC kernel: pci 0000:05:01.0: PME# disabled
Jun 26 12:33:27 ANTEC kernel: pci 0000:05:03.0: PME# supported from D2 D3hot D3cold
Jun 26 12:33:27 ANTEC kernel: pci 0000:05:03.0: PME# disabled
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1e.0: transparent bridge
Jun 26 12:33:27 ANTEC kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Jun 26 12:33:27 ANTEC kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Jun 26 12:33:27 ANTEC kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
Jun 26 12:33:27 ANTEC kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Jun 26 12:33:27 ANTEC kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jun 26 12:33:27 ANTEC kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Jun 26 12:33:27 ANTEC kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
Jun 26 12:33:27 ANTEC kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
Jun 26 12:33:27 ANTEC kernel: SCSI subsystem initialized
Jun 26 12:33:27 ANTEC kernel: usbcore: registered new interface driver usbfs
Jun 26 12:33:27 ANTEC kernel: usbcore: registered new interface driver hub
Jun 26 12:33:27 ANTEC kernel: usbcore: registered new device driver usb
Jun 26 12:33:27 ANTEC kernel: PCI: Using ACPI for IRQ routing
Jun 26 12:33:27 ANTEC kernel: NetLabel: Initializing
Jun 26 12:33:27 ANTEC kernel: NetLabel:  domain hash size = 128
Jun 26 12:33:27 ANTEC kernel: NetLabel:  protocols = UNLABELED CIPSOv4
Jun 26 12:33:27 ANTEC kernel: NetLabel:  unlabeled traffic allowed by default
Jun 26 12:33:27 ANTEC kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Jun 26 12:33:27 ANTEC kernel: hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Jun 26 12:33:27 ANTEC kernel: pnp: PnP ACPI init
Jun 26 12:33:27 ANTEC kernel: ACPI: bus type pnp registered
Jun 26 12:33:27 ANTEC kernel: pnp: PnP ACPI: found 16 devices
Jun 26 12:33:27 ANTEC kernel: ACPI: ACPI bus type pnp unregistered
Jun 26 12:33:27 ANTEC kernel: system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
Jun 26 12:33:27 ANTEC kernel: system 00:07: ioport range 0x290-0x297 has been reserved
Jun 26 12:33:27 ANTEC kernel: system 00:08: ioport range 0x4d0-0x4d1 has been reserved
Jun 26 12:33:27 ANTEC kernel: system 00:08: ioport range 0x800-0x87f has been reserved
Jun 26 12:33:27 ANTEC kernel: system 00:08: ioport range 0x480-0x4bf has been reserved
Jun 26 12:33:27 ANTEC kernel: system 00:08: iomem range 0xffafe000-0xffb0cbff could not be reserved
Jun 26 12:33:27 ANTEC kernel: system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
Jun 26 12:33:27 ANTEC kernel: system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
Jun 26 12:33:27 ANTEC kernel: system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
Jun 26 12:33:27 ANTEC kernel: system 00:08: iomem range 0xfff00000-0xfffffffe has been reserved
Jun 26 12:33:27 ANTEC kernel: system 00:08: iomem range 0xfebfe000-0xfebfec00 has been reserved
Jun 26 12:33:27 ANTEC kernel: system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
Jun 26 12:33:27 ANTEC kernel: system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
Jun 26 12:33:27 ANTEC kernel: system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
Jun 26 12:33:27 ANTEC kernel: system 00:0f: iomem range 0x0-0x9ffff could not be reserved
Jun 26 12:33:27 ANTEC kernel: system 00:0f: iomem range 0xc0000-0xcffff has been reserved
Jun 26 12:33:27 ANTEC kernel: system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
Jun 26 12:33:27 ANTEC kernel: system 00:0f: iomem range 0x100000-0x7fffffff could not be reserved
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:01.0:   IO window: 0x9000-0x9fff
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:01.0:   MEM window: 0xfa700000-0xfe7fffff
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:01.0:   PREFETCH window: 0x000000bfe00000-0x000000dfdfffff
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1c.0:   IO window: disabled
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1c.0:   MEM window: disabled
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1c.0:   PREFETCH window: 0x000000dfe00000-0x000000dfefffff
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1c.3:   IO window: disabled
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1c.3:   MEM window: 0xfe900000-0xfe9fffff
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1c.3:   PREFETCH window: disabled
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1c.4:   IO window: 0xa000-0xafff
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1c.4:   MEM window: 0xfe800000-0xfe8fffff
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1c.4:   PREFETCH window: disabled
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1e.0:   IO window: 0xb000-0xbfff
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1e.0:   MEM window: 0xfea00000-0xfeafffff
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1e.0:   PREFETCH window: disabled
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Jun 26 12:33:27 ANTEC kernel: pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jun 26 12:33:27 ANTEC kernel: NET: Registered protocol family 2
Jun 26 12:33:27 ANTEC kernel: IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
Jun 26 12:33:27 ANTEC kernel: TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
Jun 26 12:33:27 ANTEC kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Jun 26 12:33:27 ANTEC kernel: TCP: Hash tables configured (established 524288 bind 65536)
Jun 26 12:33:27 ANTEC kernel: TCP reno registered
Jun 26 12:33:27 ANTEC kernel: NET: Registered protocol family 1
Jun 26 12:33:27 ANTEC kernel: Trying to unpack rootfs image as initramfs...
Jun 26 12:33:27 ANTEC kernel: Freeing initrd memory: 3109k freed
Jun 26 12:33:27 ANTEC kernel: audit: initializing netlink socket (disabled)
Jun 26 12:33:27 ANTEC kernel: type=2000 audit(1277548383.277:1): initialized
Jun 26 12:33:27 ANTEC kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
Jun 26 12:33:27 ANTEC kernel: VFS: Disk quotas dquot_6.5.2
Jun 26 12:33:27 ANTEC kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jun 26 12:33:27 ANTEC kernel: msgmni has been set to 7849
Jun 26 12:33:27 ANTEC kernel: alg: No test for stdrng (krng)
Jun 26 12:33:27 ANTEC kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Jun 26 12:33:27 ANTEC kernel: io scheduler noop registered
Jun 26 12:33:27 ANTEC kernel: io scheduler anticipatory registered
Jun 26 12:33:27 ANTEC kernel: io scheduler deadline registered
Jun 26 12:33:27 ANTEC kernel: io scheduler cfq registered (default)
Jun 26 12:33:27 ANTEC kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jun 26 12:33:27 ANTEC kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Jun 26 12:33:27 ANTEC kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Jun 26 12:33:27 ANTEC kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
Jun 26 12:33:27 ANTEC kernel: ACPI: Power Button [PWRF]
Jun 26 12:33:27 ANTEC kernel: input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
Jun 26 12:33:27 ANTEC kernel: ACPI: Power Button [PWRB]
Jun 26 12:33:27 ANTEC kernel: ACPI: SSDT 000000007ff9e0c0 001C6 (v01    AMI   CPU1PM 00000001 INTL 20060113)
Jun 26 12:33:27 ANTEC kernel: processor ACPI_CPU:00: registered as cooling_device0
Jun 26 12:33:27 ANTEC kernel: ACPI: SSDT 000000007ff9e290 0013A (v01    AMI   CPU2PM 00000001 INTL 20060113)
Jun 26 12:33:27 ANTEC kernel: processor ACPI_CPU:01: registered as cooling_device1
Jun 26 12:33:27 ANTEC kernel: Non-volatile memory driver v1.3
Jun 26 12:33:27 ANTEC kernel: Linux agpgart interface v0.103
Jun 26 12:33:27 ANTEC kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Jun 26 12:33:27 ANTEC kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jun 26 12:33:27 ANTEC kernel: 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jun 26 12:33:27 ANTEC kernel: serial 0000:05:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Jun 26 12:33:27 ANTEC kernel: brd: module loaded
Jun 26 12:33:27 ANTEC kernel: loop: module loaded
Jun 26 12:33:27 ANTEC kernel: input: Macintosh mouse button emulation as /devices/virtual/input/input2
Jun 26 12:33:27 ANTEC kernel: Driver 'sd' needs updating - please use bus_type methods
Jun 26 12:33:27 ANTEC kernel: Driver 'sr' needs updating - please use bus_type methods
Jun 26 12:33:27 ANTEC kernel: ahci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jun 26 12:33:27 ANTEC kernel: ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
Jun 26 12:33:27 ANTEC kernel: ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
Jun 26 12:33:27 ANTEC kernel: scsi0 : ahci
Jun 26 12:33:27 ANTEC kernel: scsi1 : ahci
Jun 26 12:33:27 ANTEC kernel: ata1: SATA max UDMA/133 abar m8192@0xfe8fe000 port 0xfe8fe100 irq 16
Jun 26 12:33:27 ANTEC kernel: ata2: SATA max UDMA/133 abar m8192@0xfe8fe000 port 0xfe8fe180 irq 16
Jun 26 12:33:27 ANTEC kernel: ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Jun 26 12:33:27 ANTEC kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Jun 26 12:33:27 ANTEC kernel: scsi2 : ata_piix
Jun 26 12:33:27 ANTEC kernel: scsi3 : ata_piix
Jun 26 12:33:27 ANTEC kernel: ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 19
Jun 26 12:33:27 ANTEC kernel: ata4: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 19
Jun 26 12:33:27 ANTEC kernel: ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Jun 26 12:33:27 ANTEC kernel: ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
Jun 26 12:33:27 ANTEC kernel: scsi4 : ata_piix
Jun 26 12:33:27 ANTEC kernel: scsi5 : ata_piix
Jun 26 12:33:27 ANTEC kernel: ata5: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 19
Jun 26 12:33:27 ANTEC kernel: ata6: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 19
Jun 26 12:33:27 ANTEC kernel: Fixed MDIO Bus: probed
Jun 26 12:33:27 ANTEC kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jun 26 12:33:27 ANTEC kernel: ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Jun 26 12:33:27 ANTEC kernel: ehci_hcd 0000:00:1a.7: EHCI Host Controller
Jun 26 12:33:27 ANTEC kernel: ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Jun 26 12:33:27 ANTEC kernel: ehci_hcd 0000:00:1a.7: debug port 1
Jun 26 12:33:27 ANTEC kernel: ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebffc00
Jun 26 12:33:27 ANTEC kernel: ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Jun 26 12:33:27 ANTEC kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Jun 26 12:33:27 ANTEC kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 26 12:33:27 ANTEC kernel: usb usb1: Product: EHCI Host Controller
Jun 26 12:33:27 ANTEC kernel: usb usb1: Manufacturer: Linux 2.6.30.10-105.2.23.fc11.x86_64 ehci_hcd
Jun 26 12:33:27 ANTEC kernel: usb usb1: SerialNumber: 0000:00:1a.7
Jun 26 12:33:27 ANTEC kernel: usb usb1: configuration #1 chosen from 1 choice
Jun 26 12:33:27 ANTEC kernel: hub 1-0:1.0: USB hub found
Jun 26 12:33:27 ANTEC kernel: hub 1-0:1.0: 4 ports detected
Jun 26 12:33:27 ANTEC kernel: ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Jun 26 12:33:27 ANTEC kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Jun 26 12:33:27 ANTEC kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Jun 26 12:33:27 ANTEC kernel: ehci_hcd 0000:00:1d.7: debug port 1
Jun 26 12:33:27 ANTEC kernel: ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff800
Jun 26 12:33:27 ANTEC kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Jun 26 12:33:27 ANTEC kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Jun 26 12:33:27 ANTEC kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 26 12:33:27 ANTEC kernel: usb usb2: Product: EHCI Host Controller
Jun 26 12:33:27 ANTEC kernel: usb usb2: Manufacturer: Linux 2.6.30.10-105.2.23.fc11.x86_64 ehci_hcd
Jun 26 12:33:27 ANTEC kernel: usb usb2: SerialNumber: 0000:00:1d.7
Jun 26 12:33:27 ANTEC kernel: usb usb2: configuration #1 chosen from 1 choice
Jun 26 12:33:27 ANTEC kernel: hub 2-0:1.0: USB hub found
Jun 26 12:33:27 ANTEC kernel: hub 2-0:1.0: 6 ports detected
Jun 26 12:33:27 ANTEC kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jun 26 12:33:27 ANTEC kernel: uhci_hcd: USB Universal Host Controller Interface driver
Jun 26 12:33:27 ANTEC kernel: uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jun 26 12:33:27 ANTEC kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
Jun 26 12:33:27 ANTEC kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Jun 26 12:33:27 ANTEC kernel: uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000dc00
Jun 26 12:33:27 ANTEC kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Jun 26 12:33:27 ANTEC kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 26 12:33:27 ANTEC kernel: usb usb3: Product: UHCI Host Controller
Jun 26 12:33:27 ANTEC kernel: usb usb3: Manufacturer: Linux 2.6.30.10-105.2.23.fc11.x86_64 uhci_hcd
Jun 26 12:33:27 ANTEC kernel: usb usb3: SerialNumber: 0000:00:1a.0
Jun 26 12:33:27 ANTEC kernel: usb usb3: configuration #1 chosen from 1 choice
Jun 26 12:33:27 ANTEC kernel: hub 3-0:1.0: USB hub found
Jun 26 12:33:27 ANTEC kernel: hub 3-0:1.0: 2 ports detected
Jun 26 12:33:27 ANTEC kernel: uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Jun 26 12:33:27 ANTEC kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
Jun 26 12:33:27 ANTEC kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Jun 26 12:33:27 ANTEC kernel: uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000e000
Jun 26 12:33:27 ANTEC kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Jun 26 12:33:27 ANTEC kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 26 12:33:27 ANTEC kernel: usb usb4: Product: UHCI Host Controller
Jun 26 12:33:27 ANTEC kernel: usb usb4: Manufacturer: Linux 2.6.30.10-105.2.23.fc11.x86_64 uhci_hcd
Jun 26 12:33:27 ANTEC kernel: usb usb4: SerialNumber: 0000:00:1a.1
Jun 26 12:33:27 ANTEC kernel: usb usb4: configuration #1 chosen from 1 choice
Jun 26 12:33:27 ANTEC kernel: hub 4-0:1.0: USB hub found
Jun 26 12:33:27 ANTEC kernel: hub 4-0:1.0: 2 ports detected
Jun 26 12:33:27 ANTEC kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Jun 26 12:33:27 ANTEC kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jun 26 12:33:27 ANTEC kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
Jun 26 12:33:27 ANTEC kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d480
Jun 26 12:33:27 ANTEC kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Jun 26 12:33:27 ANTEC kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 26 12:33:27 ANTEC kernel: usb usb5: Product: UHCI Host Controller
Jun 26 12:33:27 ANTEC kernel: usb usb5: Manufacturer: Linux 2.6.30.10-105.2.23.fc11.x86_64 uhci_hcd
Jun 26 12:33:27 ANTEC kernel: usb usb5: SerialNumber: 0000:00:1d.0
Jun 26 12:33:27 ANTEC kernel: usb usb5: configuration #1 chosen from 1 choice
Jun 26 12:33:27 ANTEC kernel: hub 5-0:1.0: USB hub found
Jun 26 12:33:27 ANTEC kernel: hub 5-0:1.0: 2 ports detected
Jun 26 12:33:27 ANTEC kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Jun 26 12:33:27 ANTEC kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jun 26 12:33:27 ANTEC kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
Jun 26 12:33:27 ANTEC kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
Jun 26 12:33:27 ANTEC kernel: usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
Jun 26 12:33:27 ANTEC kernel: usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 26 12:33:27 ANTEC kernel: usb usb6: Product: UHCI Host Controller
Jun 26 12:33:27 ANTEC kernel: usb usb6: Manufacturer: Linux 2.6.30.10-105.2.23.fc11.x86_64 uhci_hcd
Jun 26 12:33:27 ANTEC kernel: usb usb6: SerialNumber: 0000:00:1d.1
Jun 26 12:33:27 ANTEC kernel: usb usb6: configuration #1 chosen from 1 choice
Jun 26 12:33:27 ANTEC kernel: hub 6-0:1.0: USB hub found
Jun 26 12:33:27 ANTEC kernel: hub 6-0:1.0: 2 ports detected
Jun 26 12:33:27 ANTEC kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Jun 26 12:33:27 ANTEC kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jun 26 12:33:27 ANTEC kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
Jun 26 12:33:27 ANTEC kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d880
Jun 26 12:33:27 ANTEC kernel: usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
Jun 26 12:33:27 ANTEC kernel: usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 26 12:33:27 ANTEC kernel: usb usb7: Product: UHCI Host Controller
Jun 26 12:33:27 ANTEC kernel: usb usb7: Manufacturer: Linux 2.6.30.10-105.2.23.fc11.x86_64 uhci_hcd
Jun 26 12:33:27 ANTEC kernel: usb usb7: SerialNumber: 0000:00:1d.2
Jun 26 12:33:27 ANTEC kernel: usb usb7: configuration #1 chosen from 1 choice
Jun 26 12:33:27 ANTEC kernel: hub 7-0:1.0: USB hub found
Jun 26 12:33:27 ANTEC kernel: hub 7-0:1.0: 2 ports detected
Jun 26 12:33:27 ANTEC kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Jun 26 12:33:27 ANTEC kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jun 26 12:33:27 ANTEC kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jun 26 12:33:27 ANTEC kernel: mice: PS/2 mouse device common for all mice
Jun 26 12:33:27 ANTEC kernel: rtc_cmos 00:03: RTC can wake from S4
Jun 26 12:33:27 ANTEC kernel: rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Jun 26 12:33:27 ANTEC kernel: rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Jun 26 12:33:27 ANTEC kernel: device-mapper: uevent: version 1.0.3
Jun 26 12:33:27 ANTEC kernel: device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
Jun 26 12:33:27 ANTEC kernel: cpuidle: using governor ladder
Jun 26 12:33:27 ANTEC kernel: cpuidle: using governor menu
Jun 26 12:33:27 ANTEC kernel: usbcore: registered new interface driver hiddev
Jun 26 12:33:27 ANTEC kernel: usbcore: registered new interface driver usbhid
Jun 26 12:33:27 ANTEC kernel: usbhid: v2.6:USB HID core driver
Jun 26 12:33:27 ANTEC kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Jun 26 12:33:27 ANTEC kernel: CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
Jun 26 12:33:27 ANTEC kernel: nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
Jun 26 12:33:27 ANTEC kernel: sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Jun 26 12:33:27 ANTEC kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jun 26 12:33:27 ANTEC kernel: TCP cubic registered
Jun 26 12:33:27 ANTEC kernel: Initializing XFRM netlink socket
Jun 26 12:33:27 ANTEC kernel: NET: Registered protocol family 17
Jun 26 12:33:27 ANTEC kernel: registered taskstats version 1
Jun 26 12:33:27 ANTEC kernel:  Magic number: 14:43:579
Jun 26 12:33:27 ANTEC kernel: pci_bus 0000:00: hash matches
Jun 26 12:33:27 ANTEC kernel: Initalizing network drop monitor service
Jun 26 12:33:27 ANTEC kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Jun 26 12:33:27 ANTEC kernel: logips2pp: Detected unknown logitech mouse model 127
Jun 26 12:33:27 ANTEC kernel: ata2: SATA link down (SStatus 0 SControl 300)
Jun 26 12:33:27 ANTEC kernel: ata1: SATA link down (SStatus 0 SControl 300)
Jun 26 12:33:27 ANTEC kernel: ata5: SATA link down (SStatus 0 SControl 300)
Jun 26 12:33:27 ANTEC kernel: usb 2-2: new high speed USB device using ehci_hcd and address 2
Jun 26 12:33:27 ANTEC kernel: usb 2-2: New USB device found, idVendor=0781, idProduct=a1a2
Jun 26 12:33:27 ANTEC kernel: usb 2-2: New USB device strings: Mfr=3, Product=4, SerialNumber=5
Jun 26 12:33:27 ANTEC kernel: usb 2-2: Product: Extreme III USB2.0 Reader/Writer
Jun 26 12:33:27 ANTEC kernel: usb 2-2: Manufacturer: SanDisk
Jun 26 12:33:27 ANTEC kernel: usb 2-2: SerialNumber: 0020042305
Jun 26 12:33:27 ANTEC kernel: usb 2-2: configuration #1 chosen from 1 choice
Jun 26 12:33:27 ANTEC kernel: input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input4
Jun 26 12:33:27 ANTEC kernel: ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jun 26 12:33:27 ANTEC kernel: ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jun 26 12:33:27 ANTEC kernel: ata3.00: ATA-7: ST3250620AS, 3.AAE, max UDMA/133
Jun 26 12:33:27 ANTEC kernel: ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Jun 26 12:33:27 ANTEC kernel: ata3.01: ATA-7: MAXTOR STM3250310AS, 3.AAA, max UDMA/133
Jun 26 12:33:27 ANTEC kernel: ata3.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Jun 26 12:33:27 ANTEC kernel: usb 6-2: new full speed USB device using uhci_hcd and address 2
Jun 26 12:33:27 ANTEC kernel: ata3.00: configured for UDMA/133
Jun 26 12:33:27 ANTEC kernel: ata3.01: configured for UDMA/133
Jun 26 12:33:27 ANTEC kernel: scsi 2:0:0:0: Direct-Access     ATA      ST3250620AS      3.AA PQ: 0 ANSI: 5
Jun 26 12:33:27 ANTEC kernel: sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
Jun 26 12:33:27 ANTEC kernel: sd 2:0:0:0: Attached scsi generic sg0 type 0
Jun 26 12:33:27 ANTEC kernel: sd 2:0:0:0: [sda] Write Protect is off
Jun 26 12:33:27 ANTEC kernel: sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 26 12:33:27 ANTEC kernel: scsi 2:0:1:0: Direct-Access     ATA      MAXTOR STM325031 3.AA PQ: 0 ANSI: 5
Jun 26 12:33:27 ANTEC kernel: sda:<5>sd 2:0:1:0: Attached scsi generic sg1 type 0
Jun 26 12:33:27 ANTEC kernel: sda1 sda2 <<5>sd 2:0:1:0: [sdb] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
Jun 26 12:33:27 ANTEC kernel: sd 2:0:1:0: [sdb] Write Protect is off
Jun 26 12:33:27 ANTEC kernel: sda5<7>sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
Jun 26 12:33:27 ANTEC kernel: sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 26 12:33:27 ANTEC kernel: sda6 sda7 sda8<6> sdb: sda9 sdb1
Jun 26 12:33:27 ANTEC kernel: sd 2:0:1:0: [sdb] Attached SCSI disk
Jun 26 12:33:27 ANTEC kernel: sda10 >
Jun 26 12:33:27 ANTEC kernel: sd 2:0:0:0: [sda] Attached SCSI disk
Jun 26 12:33:27 ANTEC kernel: usb 6-2: New USB device found, idVendor=04b8, idProduct=010f
Jun 26 12:33:27 ANTEC kernel: usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jun 26 12:33:27 ANTEC kernel: usb 6-2: Product: EPSON Scanner 010F
Jun 26 12:33:27 ANTEC kernel: usb 6-2: Manufacturer: EPSON
Jun 26 12:33:27 ANTEC kernel: usb 6-2: configuration #1 chosen from 1 choice
Jun 26 12:33:27 ANTEC kernel: ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jun 26 12:33:27 ANTEC kernel: ata4.01: SATA link down (SStatus 0 SControl 300)
Jun 26 12:33:27 ANTEC kernel: ata4.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7
Jun 26 12:33:27 ANTEC kernel: ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Jun 26 12:33:27 ANTEC kernel: ata4.00: configured for UDMA/133
Jun 26 12:33:27 ANTEC kernel: scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG HD103UJ  1AA0 PQ: 0 ANSI: 5
Jun 26 12:33:27 ANTEC kernel: sd 3:0:0:0: [sdc] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
Jun 26 12:33:27 ANTEC kernel: sd 3:0:0:0: [sdc] Write Protect is off
Jun 26 12:33:27 ANTEC kernel: sd 3:0:0:0: Attached scsi generic sg2 type 0
Jun 26 12:33:27 ANTEC kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 26 12:33:27 ANTEC kernel: sdc: sdc1
Jun 26 12:33:27 ANTEC kernel: sd 3:0:0:0: [sdc] Attached SCSI disk
Jun 26 12:33:27 ANTEC kernel: ata6: SATA link down (SStatus 0 SControl 300)
Jun 26 12:33:27 ANTEC kernel: Freeing unused kernel memory: 1292k freed
Jun 26 12:33:27 ANTEC kernel: Write protecting the kernel read-only data: 5964k
Jun 26 12:33:27 ANTEC kernel: pata_acpi 0000:02:00.1: enabling device (0000 -> 0001)
Jun 26 12:33:27 ANTEC kernel: pata_acpi 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Jun 26 12:33:27 ANTEC kernel: pata_acpi 0000:02:00.1: PCI INT B disabled
Jun 26 12:33:27 ANTEC kernel: kjournald starting.  Commit interval 5 seconds
Jun 26 12:33:27 ANTEC kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 26 12:33:27 ANTEC kernel: SELinux:  Disabled at runtime.
Jun 26 12:33:27 ANTEC kernel: type=1404 audit(1277548387.450:2): selinux=0 auid=4294967295 ses=4294967295
Jun 26 12:33:27 ANTEC kernel: udev: starting version 141
Jun 26 12:33:27 ANTEC kernel: Initializing USB Mass Storage driver...
Jun 26 12:33:27 ANTEC kernel: scsi6 : SCSI emulation for USB Mass Storage devices
Jun 26 12:33:27 ANTEC kernel: usbcore: registered new interface driver usb-storage
Jun 26 12:33:27 ANTEC kernel: USB Mass Storage support registered.
Jun 26 12:33:27 ANTEC kernel: atl1 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Jun 26 12:33:27 ANTEC kernel: atl1 0000:03:00.0: version 2.1.3
Jun 26 12:33:27 ANTEC kernel: pata_jmicron 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Jun 26 12:33:27 ANTEC kernel: scsi7 : pata_jmicron
Jun 26 12:33:27 ANTEC kernel: scsi8 : pata_jmicron
Jun 26 12:33:27 ANTEC kernel: ata7: PATA max UDMA/100 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 17
Jun 26 12:33:27 ANTEC kernel: ata8: PATA max UDMA/100 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 17
Jun 26 12:33:27 ANTEC kernel: ata7.00: ATAPI: SONY    DVD-ROM DDU1615, GYS4, max UDMA/66
Jun 26 12:33:27 ANTEC kernel: ata7.01: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB04, max UDMA/33
Jun 26 12:33:27 ANTEC kernel: ata7.00: configured for UDMA/66
Jun 26 12:33:27 ANTEC kernel: ata7.01: configured for UDMA/33
Jun 26 12:33:27 ANTEC kernel: scsi 7:0:0:0: CD-ROM            SONY     DVD-ROM DDU1615  GYS4 PQ: 0 ANSI: 5
Jun 26 12:33:27 ANTEC kernel: sr0: scsi3-mmc drive: 4x/40x cd/rw xa/form2 cdda tray
Jun 26 12:33:27 ANTEC kernel: Uniform CD-ROM driver Revision: 3.20
Jun 26 12:33:27 ANTEC kernel: sr 7:0:0:0: Attached scsi generic sg3 type 5
Jun 26 12:33:27 ANTEC kernel: scsi 7:0:1:0: CD-ROM            TSSTcorp CD/DVDW SH-S182D SB04 PQ: 0 ANSI: 5
Jun 26 12:33:27 ANTEC kernel: sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Jun 26 12:33:27 ANTEC kernel: sr 7:0:1:0: Attached scsi generic sg4 type 5
Jun 26 12:33:27 ANTEC kernel: iTCO_vendor_support: vendor-support=0
Jun 26 12:33:27 ANTEC kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
Jun 26 12:33:27 ANTEC kernel: iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860)
Jun 26 12:33:27 ANTEC kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Jun 26 12:33:27 ANTEC kernel: input: PC Speaker as /devices/platform/pcspkr/input/input5
Jun 26 12:33:27 ANTEC kernel: i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
Jun 26 12:33:27 ANTEC kernel: i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Jun 26 12:33:27 ANTEC kernel: firewire_ohci 0000:05:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Jun 26 12:33:27 ANTEC kernel: firewire_ohci: Added fw-ohci device 0000:05:03.0, OHCI version 1.0
Jun 26 12:33:27 ANTEC kernel: parport_pc 00:0a: reported by Plug and Play ACPI
Jun 26 12:33:27 ANTEC kernel: parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
Jun 26 12:33:27 ANTEC kernel: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Jun 26 12:33:27 ANTEC kernel: firewire_core: created device fw0: GUID 0011d80000ebdf15, S400
Jun 26 12:33:27 ANTEC kernel: ppdev: user-space parallel port driver
Jun 26 12:33:27 ANTEC kernel: nvidia: module license 'NVIDIA' taints kernel.
Jun 26 12:33:27 ANTEC kernel: Disabling lock debugging due to kernel taint
Jun 26 12:33:27 ANTEC kernel: nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jun 26 12:33:27 ANTEC kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module  190.53  Wed Dec  9 15:29:46 PST 2009
Jun 26 12:33:27 ANTEC kernel: input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
Jun 26 12:33:27 ANTEC kernel: device-mapper: multipath: version 1.0.5 loaded
Jun 26 12:33:27 ANTEC kernel: scsi 6:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9333 PQ: 0 ANSI: 0
Jun 26 12:33:27 ANTEC kernel: scsi 6:0:0:1: Direct-Access     Generic  STORAGE DEVICE   9333 PQ: 0 ANSI: 0
Jun 26 12:33:27 ANTEC kernel: sd 6:0:0:0: Attached scsi generic sg5 type 0
Jun 26 12:33:27 ANTEC kernel: sd 6:0:0:1: Attached scsi generic sg6 type 0
Jun 26 12:33:27 ANTEC kernel: sd 6:0:0:0: [sdd] Attached SCSI removable disk
Jun 26 12:33:27 ANTEC kernel: sd 6:0:0:1: [sde] Attached SCSI removable disk
Jun 26 12:33:27 ANTEC kernel: EXT3 FS on sda10, internal journal
Jun 26 12:33:27 ANTEC kernel: kjournald starting.  Commit interval 5 seconds
Jun 26 12:33:27 ANTEC kernel: EXT3 FS on sda6, internal journal
Jun 26 12:33:27 ANTEC kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 26 12:33:27 ANTEC kernel: kjournald starting.  Commit interval 5 seconds
Jun 26 12:33:27 ANTEC kernel: EXT3 FS on sda9, internal journal
Jun 26 12:33:27 ANTEC kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 26 12:33:27 ANTEC kernel: kjournald starting.  Commit interval 5 seconds
Jun 26 12:33:27 ANTEC kernel: EXT3 FS on sda7, internal journal
Jun 26 12:33:27 ANTEC kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 26 12:33:27 ANTEC kernel: fuse init (API version 7.11)
Jun 26 12:33:27 ANTEC kernel: Adding 1534168k swap on /dev/sda8.  Priority:-1 extents:1 across:1534168k 
Jun 26 12:33:27 ANTEC kernel: platform microcode: firmware: requesting intel-ucode/06-0f-06
Jun 26 12:33:27 ANTEC kernel: platform microcode: firmware: requesting intel-ucode/06-0f-06
Jun 26 12:33:27 ANTEC kernel: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Jun 26 12:33:27 ANTEC kernel: microcode: CPU0 updated from revision 0xc6 to 0xcb, date = 2007-09-16 
Jun 26 12:33:27 ANTEC kernel: microcode: CPU1 updated from revision 0xc6 to 0xcb, date = 2007-09-16 
Jun 26 12:33:27 ANTEC kernel: Microcode Update Driver: v2.00 removed.
Jun 26 12:33:27 ANTEC rsyslogd: [origin software="rsyslogd" swVersion="3.22.1" x-pid="1737" x-info="http://www.rsyslog.com"] (re)start
Jun 26 12:33:27 ANTEC kernel: NET: Registered protocol family 10
Jun 26 12:33:27 ANTEC kernel: lo: Disabled Privacy Extensions
Jun 26 12:33:28 ANTEC avahi-daemon[1788]: Found user 'avahi' (UID 498) and group 'avahi' (GID 498).
Jun 26 12:33:28 ANTEC avahi-daemon[1788]: Successfully dropped root privileges.
Jun 26 12:33:28 ANTEC avahi-daemon[1788]: avahi-daemon 0.6.25 starting up.
Jun 26 12:33:28 ANTEC avahi-daemon[1788]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
Jun 26 12:33:28 ANTEC avahi-daemon[1788]: Successfully called chroot().
Jun 26 12:33:28 ANTEC avahi-daemon[1788]: Successfully dropped remaining capabilities.
Jun 26 12:33:28 ANTEC avahi-daemon[1788]: Loading service file /services/ssh.service.
Jun 26 12:33:28 ANTEC avahi-daemon[1788]: Network interface enumeration completed.
Jun 26 12:33:28 ANTEC avahi-daemon[1788]: Registering HINFO record with values 'X86_64'/'LINUX'.
Jun 26 12:33:28 ANTEC avahi-daemon[1788]: Server startup complete. Host name is ANTEC.local. Local service cookie is 152916374.
Jun 26 12:33:28 ANTEC avahi-daemon[1788]: Service "ANTEC" (/services/ssh.service) successfully established.
Jun 26 12:33:29 ANTEC acpid: starting up
Jun 26 12:33:29 ANTEC acpid: 1 rule loaded
Jun 26 12:33:29 ANTEC acpid: waiting for events: event logging is off
Jun 26 12:33:30 ANTEC acpid: client connected from 1973[68:68]
Jun 26 12:33:30 ANTEC acpid: 1 client rule loaded
Jun 26 12:33:30 ANTEC pcscd: pcscdaemon.c:506:main() pcsc-lite 1.5.2 daemon ready.
Jun 26 12:33:31 ANTEC NetworkManager: <info>  starting...
Jun 26 12:33:31 ANTEC NetworkManager: <WARN>  nm_generic_enable_loopback(): error -17 returned from rtnl_addr_add():#012Sucess#012
Jun 26 12:33:31 ANTEC NetworkManager: <info>  (eth0): new Ethernet device (driver: 'atl1')
Jun 26 12:33:31 ANTEC NetworkManager: <info>  (eth0): exported as /org/freedesktop/Hal/devices/net_00_18_f3_8b_67_cf
Jun 26 12:33:31 ANTEC NetworkManager: <info>  (ttyS0): ignoring due to lack of mobile broadband capabilties
Jun 26 12:33:31 ANTEC NetworkManager: <info>  Trying to start the supplicant...
Jun 26 12:33:31 ANTEC NetworkManager: <info>  Trying to start the system settings daemon...
Jun 26 12:33:31 ANTEC nm-system-settings: Loaded plugin ifcfg-rh: (c) 2007 - 2008 Red Hat, Inc.  To report bugs please use the NetworkManager mailing li
st.
Jun 26 12:33:31 ANTEC rpc.statd[2021]: Version 1.1.6 Starting
Jun 26 12:33:31 ANTEC nm-system-settings:    ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-lo ... 
Jun 26 12:33:31 ANTEC nm-system-settings:    ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-eth0 ... 
Jun 26 12:33:31 ANTEC nm-system-settings:    ifcfg-rh:     read connection 'System eth0'
Jun 26 12:33:31 ANTEC kernel: RPC: Registered udp transport module.
Jun 26 12:33:31 ANTEC kernel: RPC: Registered tcp transport module.
Jun 26 12:33:31 ANTEC kernel: VBoxDrv: dbg - g_abExecMemory=ffffffffa0b19400
Jun 26 12:33:31 ANTEC kernel: vboxdrv: fAsync=0 offMin=0x261 offMax=0x19fa
Jun 26 12:33:31 ANTEC kernel: vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
Jun 26 12:33:32 ANTEC kernel: VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0cb9000
Jun 26 12:33:32 ANTEC NetworkManager: nm_device_ethernet_new: assertion `driver != NULL' failed
Jun 26 12:33:32 ANTEC bluetoothd[2087]: Bluetooth daemon 4.42
Jun 26 12:33:32 ANTEC bluetoothd[2087]: Starting SDP server
Jun 26 12:33:32 ANTEC kernel: Bluetooth: Core ver 2.15
Jun 26 12:33:32 ANTEC kernel: NET: Registered protocol family 31
Jun 26 12:33:32 ANTEC kernel: Bluetooth: HCI device and connection manager initialized
Jun 26 12:33:32 ANTEC kernel: Bluetooth: HCI socket layer initialized
Jun 26 12:33:32 ANTEC kernel: Bluetooth: L2CAP ver 2.13
Jun 26 12:33:32 ANTEC kernel: Bluetooth: L2CAP socket layer initialized
Jun 26 12:33:32 ANTEC bluetoothd[2087]: Parsing /etc/bluetooth/audio.conf failed: No such file or directory
Jun 26 12:33:32 ANTEC xinetd[2116]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in.
Jun 26 12:33:32 ANTEC xinetd[2116]: Started working: 0 available services
Jun 26 12:33:32 ANTEC bluetoothd[2087]: Parsing /etc/bluetooth/input.conf failed: No such file or directory
Jun 26 12:33:32 ANTEC bluetoothd[2087]: Parsing /etc/bluetooth/network.conf failed: No such file or directory
Jun 26 12:33:32 ANTEC kernel: Bluetooth: SCO (Voice Link) ver 0.6
Jun 26 12:33:32 ANTEC kernel: Bluetooth: SCO socket layer initialized
Jun 26 12:33:32 ANTEC kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Jun 26 12:33:32 ANTEC kernel: Bluetooth: BNEP filters: protocol multicast
Jun 26 12:33:32 ANTEC bluetoothd[2087]: bridge pan0 created
Jun 26 12:33:32 ANTEC kernel: Bridge firewalling registered
Jun 26 12:33:34 ANTEC smbd[2173]: [2010/06/26 12:33:34,  0] smbd/server.c:457(smbd_open_one_socket)
Jun 26 12:33:34 ANTEC smbd[2173]:   smbd_open_once_socket: open_socket_in: Adresse déjà utilisée
Jun 26 12:33:34 ANTEC smbd[2173]: [2010/06/26 12:33:34,  0] smbd/server.c:457(smbd_open_one_socket)
Jun 26 12:33:34 ANTEC smbd[2173]:   smbd_open_once_socket: open_socket_in: Adresse déjà utilisée
Jun 26 12:33:35 ANTEC NetworkManager: <info>  (eth0): device state change: 1 -> 2 (reason 2)
Jun 26 12:33:35 ANTEC NetworkManager: <info>  (eth0): bringing up device.
Jun 26 12:33:35 ANTEC NetworkManager: <info>  (eth0): preparing device.
Jun 26 12:33:35 ANTEC kernel: atl1 0000:03:00.0: eth0 link is up 100 Mbps full duplex
Jun 26 12:33:35 ANTEC kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jun 26 12:33:35 ANTEC kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jun 26 12:33:35 ANTEC NetworkManager: <info>  (eth0): deactivating device (reason: 2).
Jun 26 12:33:35 ANTEC NetworkManager: <info>  (eth0): carrier now ON (device state 2)
Jun 26 12:33:35 ANTEC NetworkManager: <info>  (eth0): device state change: 2 -> 3 (reason 40)
Jun 26 12:33:35 ANTEC NetworkManager: <info>  Activation (eth0) starting connection 'System eth0'
Jun 26 12:33:35 ANTEC NetworkManager: <info>  (eth0): device state change: 3 -> 4 (reason 0)
Jun 26 12:33:35 ANTEC NetworkManager: <info>  Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled...
Jun 26 12:33:35 ANTEC NetworkManager: <info>  Activation (eth0) Stage 1 of 5 (Device Prepare) started...
Jun 26 12:33:35 ANTEC NetworkManager: <info>  Activation (eth0) Stage 2 of 5 (Device Configure) scheduled...
Jun 26 12:33:35 ANTEC NetworkManager: <info>  Activation (eth0) Stage 1 of 5 (Device Prepare) complete.
Jun 26 12:33:35 ANTEC NetworkManager: <info>  Activation (eth0) Stage 2 of 5 (Device Configure) starting...
Jun 26 12:33:35 ANTEC NetworkManager: <info>  (eth0): device state change: 4 -> 5 (reason 0)
Jun 26 12:33:35 ANTEC NetworkManager: <info>  Activation (eth0) Stage 2 of 5 (Device Configure) successful.
Jun 26 12:33:35 ANTEC NetworkManager: <info>  Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled.
Jun 26 12:33:35 ANTEC NetworkManager: <info>  Activation (eth0) Stage 2 of 5 (Device Configure) complete.
Jun 26 12:33:35 ANTEC NetworkManager: <info>  Activation (eth0) Stage 3 of 5 (IP Configure Start) started...
Jun 26 12:33:35 ANTEC NetworkManager: <info>  (eth0): device state change: 5 -> 7 (reason 0)
Jun 26 12:33:35 ANTEC NetworkManager: <info>  Activation (eth0) Beginning DHCP transaction (timeout in 45 seconds)
Jun 26 12:33:35 ANTEC NetworkManager: <info>  dhclient started with pid 2212
Jun 26 12:33:35 ANTEC NetworkManager: <info>  Activation (eth0) Stage 3 of 5 (IP Configure Start) complete.
Jun 26 12:33:35 ANTEC dhclient: Internet Systems Consortium DHCP Client 4.1.0p1
Jun 26 12:33:35 ANTEC dhclient: Copyright 2004-2009 Internet Systems Consortium.
Jun 26 12:33:35 ANTEC dhclient: All rights reserved.
Jun 26 12:33:35 ANTEC dhclient: For info, please visit http://www.isc.org/sw/dhcp/
Jun 26 12:33:35 ANTEC dhclient: 
Jun 26 12:33:35 ANTEC NetworkManager: <info>  DHCP: device eth0 state changed (null) -> preinit
Jun 26 12:33:35 ANTEC dhclient: Listening on LPF/eth0/00:18:f3:8b:67:cf
Jun 26 12:33:35 ANTEC dhclient: Sending on   LPF/eth0/00:18:f3:8b:67:cf
Jun 26 12:33:35 ANTEC dhclient: Sending on   Socket/fallback
Jun 26 12:33:36 ANTEC nm-system-settings: Added default wired connection 'Auto vboxnet0' for /org/freedesktop/Hal/devices/net_0a_00_27_00_00_00
Jun 26 12:33:36 ANTEC avahi-daemon[1788]: Registering new address record for fe80::218:f3ff:fe8b:67cf on eth0.*.
Jun 26 12:33:36 ANTEC acpid: client connected from 2210[0:0]
Jun 26 12:33:36 ANTEC acpid: 1 client rule loaded
Jun 26 12:33:39 ANTEC dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67
Jun 26 12:33:39 ANTEC dhclient: DHCPACK from 192.168.0.254
Jun 26 12:33:39 ANTEC NetworkManager: <info>  DHCP: device eth0 state changed preinit -> reboot
Jun 26 12:33:39 ANTEC NetworkManager: <info>  Activation (eth0) Stage 4 of 5 (IP Configure Get) scheduled...
Jun 26 12:33:39 ANTEC NetworkManager: <info>  Activation (eth0) Stage 4 of 5 (IP Configure Get) started...
Jun 26 12:33:39 ANTEC NetworkManager: <info>    address 192.168.0.2
Jun 26 12:33:39 ANTEC NetworkManager: <info>    prefix 24 (255.255.255.0)
Jun 26 12:33:39 ANTEC NetworkManager: <info>    gateway 192.168.0.254
Jun 26 12:33:39 ANTEC NetworkManager: <info>    nameserver '212.27.40.240'
Jun 26 12:33:39 ANTEC NetworkManager: <info>    nameserver '212.27.40.241'
Jun 26 12:33:39 ANTEC NetworkManager: <info>  Activation (eth0) Stage 5 of 5 (IP Configure Commit) scheduled...
Jun 26 12:33:39 ANTEC NetworkManager: <info>  Activation (eth0) Stage 4 of 5 (IP Configure Get) complete.
Jun 26 12:33:39 ANTEC NetworkManager: <info>  Activation (eth0) Stage 5 of 5 (IP Configure Commit) started...
Jun 26 12:33:39 ANTEC avahi-daemon[1788]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.2.
Jun 26 12:33:39 ANTEC avahi-daemon[1788]: New relevant interface eth0.IPv4 for mDNS.
Jun 26 12:33:39 ANTEC avahi-daemon[1788]: Registering new address record for 192.168.0.2 on eth0.IPv4.
Jun 26 12:33:39 ANTEC dhclient: bound to 192.168.0.2 -- renewal in 401775 seconds.
Jun 26 12:33:40 ANTEC NetworkManager: <info>  (eth0): device state change: 7 -> 8 (reason 0)
Jun 26 12:33:40 ANTEC NetworkManager: <info>  Policy set 'System eth0' (eth0) as default for routing and DNS.
Jun 26 12:33:40 ANTEC NetworkManager: <info>  Activation (eth0) successful, device activated.
Jun 26 12:33:40 ANTEC NetworkManager: <info>  Activation (eth0) Stage 5 of 5 (IP Configure Commit) complete.
Jun 26 12:34:14 ANTEC gnome-keyring-daemon[2296]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by an
y .service files
    Sinon le ping de google est ok :
    [root@ANTEC log]# ping google.fr
PING google.fr (216.239.59.104) 56(84) bytes of data.
64 bytes from gv-in-f104.1e100.net (216.239.59.104): icmp_seq=1 ttl=247 time=62.1 ms
64 bytes from gv-in-f104.1e100.net (216.239.59.104): icmp_seq=2 ttl=247 time=34.1 ms
64 bytes from gv-in-f104.1e100.net (216.239.59.104): icmp_seq=3 ttl=247 time=36.6 ms
64 bytes from gv-in-f104.1e100.net (216.239.59.104): icmp_seq=4 ttl=247 time=34.7 ms
64 bytes from gv-in-f104.1e100.net (216.239.59.104): icmp_seq=5 ttl=247 time=36.0 ms
64 bytes from gv-in-f104.1e100.net (216.239.59.104): icmp_seq=6 ttl=247 time=34.5 ms
64 bytes from gv-in-f104.1e100.net (216.239.59.104): icmp_seq=7 ttl=247 time=34.7 ms
64 bytes from gv-in-f104.1e100.net (216.239.59.104): icmp_seq=8 ttl=247 time=34.3 ms
64 bytes from gv-in-f104.1e100.net (216.239.59.104): icmp_seq=9 ttl=247 time=55.5 ms
^C
--- google.fr ping statistics ---
9 packets transmitted, 9 received, 0% packet loss, time 8351ms
rtt min/avg/max/mdev = 34.113/40.318/62.142/10.062 ms
[root@ANTEC log]#
    TBA
  • Dans Problèmes divers internet et FireFox suite mise à jour
    Bonsoir,

    Suite à une mise à jour le 23/06/10 je constate :
    - aMSN ne parvient plus à établir la connexion
    - Firefox ne me permet plus de me connecter à un forum (les identifiants et mots de passe sont bons, il m'identifie puis me rejette immédiatement). Ca marche avec Konqueror.
    - L'heure de mon PC est devenue fantaisiste. J'ai supprimé la mise à l'heure synchronisée par le réseau, pour voir...

    Je ne vois pas bien en quoi ces soucis peuvent être liés, mais ils sont tous dépendants de ma connexion internet...

    Les modifs suites mises à jour du 23/06 sont les suivantes (visionneur journal des logiciels) :

    Paquets installés :
    libpano13,
    libpano13-tools,
    glew,
    plotutils,
    enblend,
    perl-Images-Exiftool,
    hugin-base

    Paquets mis à jour :
    openssl,
    java-1.6.0-openjdk,
    libssh,
    anthy,
    java-1.6.0-openjdk-plugin,
    kipi-plugin-libs,
    digikam-libs,
    digikam,
    kipi-plugins

    Mon premier réflexe (de débutant) a été de vouloir supprimer les nouveaux paquets installés.
    Cela n'a pas été possible : KPackageKit n'arrive pas à résoudre les dépendances.

    Mais peut être que je cherche dans la mauvaise direction.... quelqu'un a-t-il une idée de l'origine de mon soucis ?

    Merci d'avance
    TBA
  • Dans Fedora 12 sous virtualbox
    Salut,

    As tu finalement trouvé une solution fiable ?

    Ce soucis d'instal des guestaddition ne concerne t-il que la version 86_64 ?

    Je n'ai pas pris le temps encore de tester en 32bits, mais j'ai exactement le problème décrit dans ton 1er lien.

    Merci de ton retour d'infos si tu passes par là 🙂

    TBA
  • Dans J'en ai marrre!!!
    Salut 🙂

    Moi aussi je suis dans la mécanique.
    Moi aussi j'en ai eu assez de la suprématie et des bugs Microsoft
    Moi aussi j'ai été séduit par le libre, par Linux
    .... et moi aussi j'ai eu (et j'ai toujours de temps en temps) mon lot de problèmes irritants 😉

    Par exemple : mon scanner n'a jamais fonctionné correctement : http://forums.fedora-fr.org/viewtopic.php?id=30642&words=
    Et pourtant quelques spécialistes sont passés à la maison essayer de résoudre le truc directement !

    Mais je me suis accroché et je boote à 99% sur Fédora (11)

    Ceci dit, au milieu des réponses trop techniciennes pour les débutants, des "rtfm" (Ubuntu....) et autres arguments de "spécialistes" (pas en pédagogie), j'ai trouvé aussi une communauté avec quelques uns qui donnent beaucoup d'eux même.
    Rien que pour ça, pour eux, j'évite de m'énerver comme toi 😉
    Et à vrai dire quand j'ai un problème je ne poste plus. Si je trouve la solution dispo tant mieux. Je cherche par moi même, et si je ne trouve pas, je contourne (je scanne avec un XP en machine virtuelle....)

    Linux reste un OS complexe pour qui n'a pas de connaissances de base en informatique, et ne souhaite pas y consacrer 2 ou 3 heures par jour.
    Quand je dis connaissances de base, je veux dire comprendre les principes, comprendre ce que l'on fait, comment ça marche et ce que ça implique, et non pas recopier bêtement les 5 lignes de code (sous root bien sur) que l'on a trouvé sur un forum.

    Faut le savoir et l'accepter c'est tout 🙂

    A ce propos, je te conseille cet ouvrage :
    http://www.editions-eyrolles.com/Livre/9782212124248/linux-aux-petits-oignons

    TBA (qui tient bon sous F11... même sans scanner)
  • Dans Ecran noir après le démarrage.
  • Dans Help ! mise-à-jour = plus moyen de démarrer FEDORA
    Bonjour 🙂
    modmol wrote:...je vous encourage chacun, à réouvrir un post, en détaillant au mieux le problème...
    Mon problème est résolu (post #15 et #24), et à priori celui de thanatonpatisas aussi (post #22), donc il ne reste "que" le soucis de sylvius, qui a ouvert un sujet dédié.

    C'est propre donc. Merci encore 😉

    TBA
  • Dans Help ! mise-à-jour = plus moyen de démarrer FEDORA
    modmol wrote:... si gnome fonctionne, il parait peu probable, que cela vienne, des pilotes graphiques...
    C'est ce qui m'a surpris car c'était pareil dans mon cas : ça fonctionnait sous Gnome et pas sous Kde (voir post #5) :-?

    TBA
  • Dans Help ! mise-à-jour = plus moyen de démarrer FEDORA
    Si ça peut aider les autres, je confirme l'évolution de ma situation :

    Hier la version le 2.6.30.9-96.fc11....etc ne fonctionnait pas (écran noir), et je n'avais pas possibilité d'installer le kmod-nvidia-2.6.30.9-96.....

    J'ai bien les dépôts :
    - RPM Fusion for Fedora 11 - Free
    - RPM Fusion for Fedora 11 - Non Free
    + Les 2 même avec - Updates

    Je suppose que modmol a les dépots "test updates" pour avoir trouvé le kmod 9-96 hier.

    Bref j'ai préféré attendre, et effectivement ce matin le kmod-nvidia-2.6.30.9-96..... était dispo pour moi.

    Je l'ai installé et tout marche au poil 😉

    TBA
  • Dans Help ! mise-à-jour = plus moyen de démarrer FEDORA
    modmol wrote:Voila même pas besoin d'attendre trés longtemps, les nouveaux kmod-nvidia sont disponibles pour tous les noyaux 2.6.30.90 et 2.6.30.96 pour la version de driver 190.42.1
    Désolé, encore une question de débutant : tu l'as trouvé dans quel dépot ? (il ne me le trouve pas) :-?
    (version driver 185.18.36-1)

    TBA
  • Dans Help ! mise-à-jour = plus moyen de démarrer FEDORA
    tba44 wrote:Actuellement ça ne fonctionne qu'avec la 8-64.
    Avec la 9-90 et la 9-96 j'ai le même symptome d'écran noir
    Autant pour moi j'ai dit une bétise !!!

    Effectivement je viens de rebooter en 2.6.30.9-90.fc11.x86_64 et ça marche...

    L'explication que je vois dans mon caffouillage :
    -> hier travail sur la 2.6.30.8-64. Il installe la 2.6.30.9-90 mais je reboote pas, donc RAS
    -> ce matin je boote 2.6.30.9-90 --> marche pas donc je reprends 2.6.30.8-64, il installe de nouveaux trucs, dont 2.6.30.9-96
    -> Je boote 2.6.30.9-96 en me disant que ça va résoudre le pb, -> marche pas
    -> J'en conclu que ni 2.6.30.9-90 ni 2.6.30.9-96 ne marchent, mais j'ai pas ré-essayé la 2.6.30.9-90 :-P

    Donc comme l'a dit modmol, je suppose qu'il faut maintenant que j'attente le kmod-nvidia-2.6.30.9-96 pour booter en 2.6.30.9-96.fc11.x86_64 🙂

    Merci de m'avoir dépanné et surtout instruit :pint:

    Et toutes mes excuses à thanatonpatisas pour lui avoir squatté son post (je pensais que les pb étaient de même nature)

    TBA
  • Dans Help ! mise-à-jour = plus moyen de démarrer FEDORA
    modmol wrote:@tb44

    que donne 
    rpm -qa | grep kernel
    si tu as kernel-2.6.30.9-90.fc11.x86_64 alors oui cela doit fonctionner avec le kmod que tu donnes, mais tu dis que tu as fait une mise à jour ce matin avec un nouveau kernel

    donc tu dois être à
    kernel-2.6.30.9-96.fc11.x86_64
    il faut donc attendre le kmod-nvidia-2.6.30.9-96

    si tu redémarre sur le kernel kernel-2.6.30.9-90 as tu du graphique ?

    pour éviter ce genre de désagrément utilises akmod-nvidia plutot que kmod
    Ben justement :
    [thierry@ANTEC ~]$ rpm -qa | grep kernel
kernel-2.6.30.9-96.fc11.x86_64
kerneloops-0.12-5.fc11.x86_64
kernel-devel-2.6.30.9-90.fc11.x86_64
kernel-2.6.30.9-90.fc11.x86_64
kernel-headers-2.6.30.9-96.fc11.x86_64
kernel-2.6.30.8-64.fc11.x86_64
kernel-devel-2.6.30.9-96.fc11.x86_64
kernel-devel-2.6.30.8-64.fc11.x86_64
kernel-firmware-2.6.30.9-96.fc11.noarch
[thierry@ANTEC ~]$
    Donc si j'ai bien tout compris ça devrait marcher....

    Actuellement ça ne fonctionne qu'avec la 8-64.
    Avec la 9-90 et la 9-96 j'ai le même symptome d'écran noir

    TBA
  • Dans Help ! mise-à-jour = plus moyen de démarrer FEDORA
    Désolé d'avoir squatté le sujet si mon pb est différent :-?
    modmol wrote:avant d'installer un nouveau kernel, il faut vérifier que les kmod correspondant à ce noyau sont disponibles...
    si tu as une carte nvidia, et que tu utilises le pilote propriétaire via kmod-nvidia, il faut attendre qu'il soit dispo pour
    changer de kernel. sinon les problèmes d'écran noir seront ton pain quotidien.
    Merci de ta réponse 🙂

    Oui j'ai une nvidia, mais ça a l'air d'être bon pourtant non :
    [root@ANTEC thierry]# yum list *nvidia*
Modules complémentaires chargés : refresh-packagekit
Paquets installés
kmod-nvidia.x86_64                                                      185.18.36-1.fc11.3                   @rpmfusion-nonfree-updates
kmod-nvidia-2.6.30.8-64.fc11.x86_64.x86_64                              185.18.36-1.fc11.2                   @rpmfusion-nonfree-updates
kmod-nvidia-2.6.30.9-90.fc11.x86_64.x86_64                              185.18.36-1.fc11.3                   @rpmfusion-nonfree-updates
xorg-x11-drv-nvidia.x86_64                                              185.18.36-3.fc11                     @rpmfusion-nonfree-updates
xorg-x11-drv-nvidia-libs.x86_64                                         185.18.36-3.fc11                     @rpmfusion-nonfree-updates
    Celui là kmod-nvidia-2.6.30.9-90.fc11.x86_64.x86_64 devrait être ok ?
    si tu as les pilotes proprio je pense que, comme dit la doc, il nécessite un mkinitrd (u que le driver nouveau est par défaut dans le initrd du noyau)
    donc je pense que si tu refais un mkinitrd comme redis dans la doc, ça va passer
    sinon dis nous ce que tu as en bootant en init 3 => ajouter 3 après la seconde ligne dans grub
    Suite à ton conseil j'ai testé ça n'a rien donné 🙁

    TBA
  • Dans Help ! mise-à-jour = plus moyen de démarrer FEDORA
    Problème similaire pour moi à mon avis :

    Version précédente : 2.6.30.8-64.fc11.x86_64
    Pas de soucis

    Mise à jour d'hier : .6.30.9-90.fc11.x86_64
    Grub se lance bien. Si je choisi cette dernière version j'arrive au gestionnaire de session
    Si je lance une session sous KDE : écran noir, souris visible et active. Mes applis sont lancées (j'entend la musique d'accueil et Alt-Tab fait réagir l'écran noir...)
    Sous Gnome ça marche, sauf que ma config double écran est aux fraises (encore un xorg.conf qu'il me faudra définir à la main... jamais réussi par l'interface graphique)

    Mise à jour de ce matin : 2.6.30.9-96.fc11.x86_64
    Même comportement.
    J'ai substitué mon xorg.conf par l'ancien qui marchait -> pas mieux
    J'ai booté sur un seul écran -> pas mieux
    Rien à voir donc

    Un problème de pilote de carte ?

    Avec l'ancienne version : 2.6.30.8-64.fc11.x86_64 depuis grub, tout marche bien

    Je ne sais pas si mon post est utile pour faire avancer le scmilblick.
    Dans tous les cas merci de commentaires ou réponses "simples" : je ne suis pas informaticien 😉

    TBA
  • Dans Scanner EPSON Photo Perfection 1250. Problème avec Xsane
    Après une période sans informatique, je donne la fin vu que mon problème est résolu :

    @ nouvo09 : je vois oui.... merci pour ces précieux conseils.

    J'ai installé le driver dispo ici : http://www.avasys.jp/lx-bin2/linux_e/scan/DL1.do
    Et effectivement (merci bus), le paramètre "warmup time" permet de résoudre le problème de temps à la 1ère mie en service.
    Je l'avais sous le nez sans l'avoir vu...

    Merci à tous

    TBA
  • Dans Scanner EPSON Photo Perfection 1250. Problème avec Xsane
    Merci de vos réponses.
    Bon désolé, j'ai cherché mais pas trouvé (ou pas compris).

    J'ai voulu faire ce que m'a indiqué eddy33.
    Sur le lien donné j'ai trouvé mon scanner, qui redirige sur cette page :
    http://www.sane-project.org/man/sane-epson.5.html

    Avec Pirut, j'ai essayé de trouver "sane-plustek" ou bien "plustek", "sane-epson", etc.... sans succés

    En fait j'ai vu que j'ai déja ces paquets là installés (entre autres) :

    sane-backends-libs-1.0.18-17.fc8x86_64
    sane-backends-1.0.18-17.fc8.x86_64

    Ensuite j'ai essayé de modifier la configuration usb dans "/etc/sane.d/plustek.conf", comme il est proposé dans le lien que je donne plus haut.
    Sans résultat. J'ai donc remis comme à l'origine.

    Où puis-je trouver le driver indiqué par eddy33 (je me penche sur celui là vu qu'il a l'air de correspondre à sane) ?

    TBA (grand débutant qui a essayé avant de poser sa question) 😉
  • Dans Scanner EPSON Photo Perfection 1250. Problème avec Xsane
    Bonjour,

    Je suis débutant sous Linux et non-informaticien. Merci de votre indulgence si la question est idiote.
    J'ai trouvé une solutions à tous mes soucis sur le forum, sauf à celui là :

    1- Lorsque je lance Xsane, mon Scanner est bien reconnu.

    2- Quand je fais "l'acquisition de l'aperçu", j'entend le moteur du scanner faire un bruit, puis il faut environ 1 minute pour qu'il exécute l'aperçu, à tel point que j'ai cru un moment que ça ne marchait pas...

    3- De temps en temps (et en particulier si je multiplie les aperçus), la fenêtre de visualisation me renvoie une image avec des bandes de couleurs....



    4- Quand je numérise et que je sauvegarde, l'image est OK



    Ces soucis étaient présents avec fédora 7 aussi.

    Avec vous des idées sur ces points ?

    Merci
    TBA