Bonjour,

Il y a bien longtemps que je n'avais posté pour tenter de résoudre un problème d'imprimante/scanner.
J'ai passé mon poste fixe sous kde et alors que l'imprimante Canon MP270 est de suite reconnue s'installe facilement et fonctionne le scanner lui ne marche pas. J'ai essayé Skanlite, Simple-Scan et Xsane sans résultat. Avec mon portable qui lui est sous Gnome par contre RAS, tout fonctionne.
De nombreux sujets ont été édités ici concernant des scanner, j'ai survolé et tenté des manip sans résultat pour le moment, je bloque. De plus je ne dois pas bien m'y prendre pour installé des fichiers .tar j'ai souvent des résultats de "dossiers inexistants".
J'ai installé depuis le site de Canon 
scangearmp-mp270series-1.40-1.i386.rpm
et
 scangearmp-common-1.40-1.i386.rpm
Sans résultat, (après reboot pour voir) 
lsusb
identifie pourtant bien la connexion de l'imprimante/scanner 
Bus 004 Device 007: ID 04a9:173b Canon, Inc. PIXMA MP270 All-In-One Printer
Bus 004 Device 006: ID 045e:028e Microsoft Corp. Xbox360 Controller
Bus 004 Device 005: ID 046d:c062 Logitech, Inc. M-UAS144 [LS1 Laser Mouse]
Bus 004 Device 004: ID 1113:3163 Medion AG 
Bus 004 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 004 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 0bc2:3320 Seagate RSS LLC SRD00F2 [Expansion Desktop Drive]
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
en revanche 
sane-find-scanner 
-bash: sane-find-scanner : commande introuvable
ne donne rien

Les paquets sane installés ( elle est bien dans la liste des compatibles et de toute façon fonctionne sous gnome)
libksane.x86_64                14.12.1-1.fc21       @updates                    
sane-backends-libs.x86_64      1.0.24-13.fc21       @updates                    
xsane.x86_64                   0.999-16.fc21        @fedora                     
xsane-common.x86_64            0.999-16.fc21        @fedora  
scanimage -L
rien, commande inconnue, peut-être un paquet manquant ?

Merci !
Les paquets de canon intègre leur propre utilitaire "scangearquelquechose" et non pas avec sane.
merci pour la précision VINDICATORs
Normalement scangearmp-mp270series pour moi, installé à la main mais ne donnant rien pour le moment avec aucun outil de scan comme cité précédemment. Il devrait s'installer lors de la première configuration de l'imprimante. Si ce n'est pas le cas sous kde, pourquoi est-ce fonctionnel sous Gnome ? Il faudrait peut-être trouver les paquets installés sous Gnome. :-?

Edit : sous gnome j'ai :
libsane-hpaio.x86_64             3.14.10-5.fc21     @updates                    
sane-backends.x86_64             1.0.24-13.fc21     @updates                    
sane-backends-drivers-scanners.x86_64
sane-backends-libs.x86_64        1.0.24-13.fc21     @updates
Les paquets que ce soit sous gnome ou kde ils sont là. Faut juste soit taper dans un terminal scangear... (dsl j'ai plus la commande en tête, mais tape scang et la touche tabulation pour avoir la suite), soit clique droit et "lancer la commande" ou dans kmenu tape scangear... il devrait trouver. Ensuite tu rajoute le lien et pis c'est bon.

Scangearmp et sane n'ont rien à voir.

J'ai une machine chez mon père qui fonctionne avec, je vais lui demander la commande exact.
scangearmp
J'ai ça en commande qui me donne ceci :

le scanner est bien branché ...
Désactive selinux pour voir si c'est pas lui qui bloque.

Je viens de retrouve aussi les paquets sur mes disques.

Ta pas trouvé la version x86_64 des paquets?
Ta pas trouvé la version x86_64 des paquets
Pas vu, je regarde tt à l'heure !
Ainsi que pour selinux ...
merci !!
Bon j'ai essayé de réinstaller l'imprimante sans selinux, toujours aucun scanner. :-?
Je ne trouve pas de version x86_64 des paquets sur le site canon
Tu dis que ça fonctionne sous Gnome?

Parce qu'il y a aussi une autre possibilité, qui est un souci avec le port usb. Parfois certains périphérique tirent trop de puissance sur les ports et avec des ports qui sont parfois faiblard, il arrive que ça fasse déconner la cm, voir coupe le périphérique.

Si je me souvient bien le scanner pompe plus que l'imprimante, ça explique peut être les soucis de détections. J'ai déjà eu le souci avec celle de mon paternel.
Tu dis que ça fonctionne sous Gnome?
yes ! quand l'ordi était sous gnome et mon portable qui lui est sur ce DE cela marche sans problème
voir coupe le périphérique
???
J'ai essayé tous les ports dispo
Merci de te pencher sur mon problème VINDICATORs !
Regarde la modification quand tu branche l'imprimante avec dmesg.
Je te mets la partie où apparait l'imprimante et l'ensemble 
-0000:00:1d.0-1.3/input0
[ 2994.844946] usb 3-1.2: new high-speed USB device number 3 using ehci-pci
[ 2994.932310] usb 3-1.2: New USB device found, idVendor=04a9, idProduct=173b
[ 2994.932317] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2994.932321] usb 3-1.2: Product: MP270 series
[ 2994.932324] usb 3-1.2: Manufacturer: Canon
[ 2994.932328] usb 3-1.2: SerialNumber: 82F63D
[ 2994.998808] usblp 3-1.2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x173B
[ 2994.998832] usbcore: registered new interface driver usblp
[ 2996.117965] usblp0: removed
[ 2996.121635] usblp 3-1.2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x173B

[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask FE0000000 write-back
[    0.000000]   2 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdfe70 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x0203a000, 0x0203afff] PGTABLE
[    0.000000] BRK [0x0203b000, 0x0203bfff] PGTABLE
[    0.000000] BRK [0x0203c000, 0x0203cfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x21fe00000-0x21fffffff]
[    0.000000]  [mem 0x21fe00000-0x21fffffff] page 2M
[    0.000000] BRK [0x0203d000, 0x0203dfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x21c000000-0x21fdfffff]
[    0.000000]  [mem 0x21c000000-0x21fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[    0.000000]  [mem 0x200000000-0x21bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xdfe6ffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xdfdfffff] page 2M
[    0.000000]  [mem 0xdfe00000-0xdfe6ffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[    0.000000]  [mem 0x100000000-0x1ffffffff] page 2M
[    0.000000] BRK [0x0203e000, 0x0203efff] PGTABLE
[    0.000000] BRK [0x0203f000, 0x0203ffff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35ea3000-0x36f49fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FB920 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x00000000DFE70000 000044 (v01 102910 RSDT1537 20101029 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000DFE70200 000084 (v01 102910 FACP1537 20101029 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000DFE704A0 00EF15 (v01 A1511  A1511001 00000001 INTL 20060113)
[    0.000000] ACPI: FACS 0x00000000DFE88000 000040
[    0.000000] ACPI: APIC 0x00000000DFE70390 0000CC (v01 102910 APIC1537 20101029 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000DFE70460 00003C (v01 102910 OEMMCFG  20101029 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000DFE88040 000072 (v01 102910 OEMB1537 20101029 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DFE7F3C0 000038 (v01 102910 OEMHPET  20101029 MSFT 00000097)
[    0.000000] ACPI: ASPT 0x00000000DFE7F660 000034 (v06 102910 PerfTune 20101029 MSFT 00000097)
[    0.000000] ACPI: OSFR 0x00000000DFE7F6A0 0000B0 (v01 102910 OEMOSFR  20101029 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000DFE897E0 000363 (v01 DpgPmm CpuPm    00000012 INTL 20060113)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x21ffe6000-0x21fff9fff]
[    0.000000]  [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217600000-ffff88021f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x21fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xdfe6ffff]
[    0.000000]   node   0: [mem 0x100000000-0x21fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00001000-0x21fffffff]
[    0.000000] On node 0 totalpages: 2096654
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14266 pages used for memmap
[    0.000000]   DMA32 zone: 913008 pages, LIFO batch:31
[    0.000000]   Normal zone: 18432 pages used for memmap
[    0.000000]   Normal zone: 1179648 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[    0.000000] ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfe70000-0xdfe87fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfe88000-0xdfedbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfedc000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[    0.000000] e820: [mem 0xe0000000-0xfedfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff88021fc00000 s84480 r8192 d30208 u131072
[    0.000000] pcpu-alloc: s84480 r8192 d30208 u131072 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2063871
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.18.7-200.fc21.x86_64 root=UUID=f4eb275b-b0b8-4bb6-b89e-671cb4ed3efd ro rhgb quiet nouveau.modeset=0 rd.driver.blacklist=nouveau video=vesa:off
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Memory: 8153444K/8386616K available (7593K kernel code, 1235K rwdata, 3276K rodata, 1500K init, 1552K bss, 233172K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=16.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.000000] NR_IRQS:65792 nr_irqs:552 0
[    0.000000]  Offload RCU callbacks from all CPUs
[    0.000000]  Offload RCU callbacks from CPUs: 0-15.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 33554432 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2808.522 MHz processor
[    0.000031] Calibrating delay loop (skipped), value calculated using timer frequency.. 5617.04 BogoMIPS (lpj=2808522)
[    0.000033] pid_max: default: 32768 minimum: 301
[    0.000041] ACPI: Core revision 20140926
[    0.009006] ACPI: All ACPI Tables successfully acquired
[    0.114010] Security Framework initialized
[    0.114017] SELinux:  Initializing.
[    0.114022] SELinux:  Starting in permissive mode
[    0.114662] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.117235] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.118324] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.118335] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.118596] Initializing cgroup subsys memory
[    0.118603] Initializing cgroup subsys devices
[    0.118605] Initializing cgroup subsys freezer
[    0.118607] Initializing cgroup subsys net_cls
[    0.118609] Initializing cgroup subsys blkio
[    0.118611] Initializing cgroup subsys perf_event
[    0.118612] Initializing cgroup subsys net_prio
[    0.118614] Initializing cgroup subsys hugetlb
[    0.118634] CPU: Physical Processor ID: 0
[    0.118635] CPU: Processor Core ID: 0
[    0.118640] mce: CPU supports 9 MCE banks
[    0.118648] CPU0: Thermal monitoring enabled (TM1)
[    0.118657] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.118736] Freeing SMP alternatives memory: 28K (ffffffff81ead000 - ffffffff81eb4000)
[    0.119587] ftrace: allocating 27471 entries in 108 pages
[    0.131651] Switched APIC routing to physical flat.
[    0.132035] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.142048] smpboot: CPU0: Intel(R) Core(TM) i5 CPU         760  @ 2.80GHz (fam: 06, model: 1e, stepping: 05)
[    0.243732] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[    0.243747] perf_event_intel: CPU erratum AAJ80 worked around
[    0.243748] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[    0.243750] ... version:                3
[    0.243751] ... bit width:              48
[    0.243752] ... generic registers:      4
[    0.243752] ... value mask:             0000ffffffffffff
[    0.243753] ... max period:             000000007fffffff
[    0.243754] ... fixed-purpose events:   3
[    0.243755] ... event mask:             000000070000000f
[    0.245136] x86: Booting SMP configuration:
[    0.245138] .... node  #0, CPUs:        #1
[    0.256499] CPU1 microcode updated early to revision 0x7, date = 2013-08-20
[    0.258736] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.258840]   #2
[    0.270202] CPU2 microcode updated early to revision 0x7, date = 2013-08-20
[    0.272390]   #3
[    0.283751] CPU3 microcode updated early to revision 0x7, date = 2013-08-20
[    0.285843] x86: Booted up 1 node, 4 CPUs
[    0.285847] smpboot: Total of 4 processors activated (22468.17 BogoMIPS)
[    0.288743] devtmpfs: initialized
[    0.291318] PM: Registering ACPI NVS region [mem 0xdfe88000-0xdfedbfff] (344064 bytes)
[    0.292258] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.292261] pinctrl core: initialized pinctrl subsystem
[    0.292300] RTC time:  8:56:54, date: 03/03/15
[    0.292392] NET: Registered protocol family 16
[    0.297636] cpuidle: using governor menu
[    0.297759] ACPI: bus type PCI registered
[    0.297761] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.297836] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.297838] PCI: not using MMCONFIG
[    0.297839] PCI: Using configuration type 1 for base access
[    0.303034] ACPI: Added _OSI(Module Device)
[    0.303036] ACPI: Added _OSI(Processor Device)
[    0.303037] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.303038] ACPI: Added _OSI(Processor Aggregator Device)
[    0.305031] ACPI: Executed 1 blocks of module-level executable AML code
[    0.310784] ACPI: Dynamic OEM Table Load:
[    0.310792] ACPI: SSDT 0xFFFF880213E68000 001238 (v01 DpgPmm P001Ist  00000011 INTL 20060113)
[    0.311202] ACPI: Dynamic OEM Table Load:
[    0.311206] ACPI: SSDT 0xFFFF880213C43000 0004D5 (v01 PmRef  P001Cst  00003001 INTL 20060113)
[    0.311778] ACPI: Interpreter enabled
[    0.311787] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
[    0.311798] ACPI: (supports S0 S1 S3 S4 S5)
[    0.311799] ACPI: Using IOAPIC for interrupt routing
[    0.311815] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.312744] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    0.312872] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.318207] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.318212] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.318356] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[    0.318425] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.318428] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.318430] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.318431] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.318537] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.318682] PCI host bridge to bus 0000:00
[    0.318684] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.318686] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.318688] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.318689] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.318691] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[    0.318692] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff]
[    0.318694] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed8ffff]
[    0.318702] pci 0000:00:00.0: [8086:d131] type 00 class 0x060000
[    0.318799] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
[    0.318849] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.318888] pci 0000:00:03.0: System wakeup disabled by ACPI
[    0.318924] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
[    0.319013] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
[    0.319102] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
[    0.319188] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
[    0.319268] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
[    0.319342] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
[    0.319440] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.319460] pci 0000:00:1a.0: reg 0x10: [mem 0xf3ffe000-0xf3ffe3ff]
[    0.319544] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.319582] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.319619] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.319634] pci 0000:00:1b.0: reg 0x10: [mem 0xf3ff8000-0xf3ffbfff 64bit]
[    0.319702] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.319768] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.319830] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.319868] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.319903] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[    0.319965] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.320003] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.320037] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
[    0.320098] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.320136] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.320170] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[    0.320231] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.320269] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.320304] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[    0.320371] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.320410] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.320444] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
[    0.320505] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.320543] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.320576] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
[    0.320642] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.320680] pci 0000:00:1c.6: System wakeup disabled by ACPI
[    0.320714] pci 0000:00:1c.7: [8086:3b50] type 01 class 0x060400
[    0.320779] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.320818] pci 0000:00:1c.7: System wakeup disabled by ACPI
[    0.320856] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.320875] pci 0000:00:1d.0: reg 0x10: [mem 0xf3ffd000-0xf3ffd3ff]
[    0.320959] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.320997] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.321033] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.321107] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.321143] pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100
[    0.321300] pci 0000:00:1f.2: [8086:3b20] type 00 class 0x01018f
[    0.321314] pci 0000:00:1f.2: reg 0x10: [io  0x9c00-0x9c07]
[    0.321321] pci 0000:00:1f.2: reg 0x14: [io  0x9880-0x9883]
[    0.321328] pci 0000:00:1f.2: reg 0x18: [io  0x9800-0x9807]
[    0.321335] pci 0000:00:1f.2: reg 0x1c: [io  0x9480-0x9483]
[    0.321341] pci 0000:00:1f.2: reg 0x20: [io  0x9400-0x940f]
[    0.321350] pci 0000:00:1f.2: reg 0x24: [io  0x9080-0x908f]
[    0.321438] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.321452] pci 0000:00:1f.3: reg 0x10: [mem 0xf3ffc000-0xf3ffc0ff 64bit]
[    0.321470] pci 0000:00:1f.3: reg 0x20: [io  0xffe0-0xffff]
[    0.321544] pci 0000:00:1f.5: [8086:3b26] type 00 class 0x010185
[    0.321557] pci 0000:00:1f.5: reg 0x10: [io  0xac00-0xac07]
[    0.321564] pci 0000:00:1f.5: reg 0x14: [io  0xa880-0xa883]
[    0.321571] pci 0000:00:1f.5: reg 0x18: [io  0xa800-0xa807]
[    0.321578] pci 0000:00:1f.5: reg 0x1c: [io  0xa480-0xa483]
[    0.321584] pci 0000:00:1f.5: reg 0x20: [io  0xa400-0xa40f]
[    0.321591] pci 0000:00:1f.5: reg 0x24: [io  0xa080-0xa08f]
[    0.321721] pci 0000:01:00.0: [10de:0e22] type 00 class 0x030000
[    0.321731] pci 0000:01:00.0: reg 0x10: [mem 0xf4000000-0xf5ffffff]
[    0.321741] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[    0.321750] pci 0000:01:00.0: reg 0x1c: [mem 0xe4000000-0xe7ffffff 64bit pref]
[    0.321757] pci 0000:01:00.0: reg 0x24: [io  0xbc00-0xbc7f]
[    0.321763] pci 0000:01:00.0: reg 0x30: [mem 0xf7b00000-0xf7b7ffff pref]
[    0.321845] pci 0000:01:00.1: [10de:0beb] type 00 class 0x040300
[    0.321855] pci 0000:01:00.1: reg 0x10: [mem 0xf7bfc000-0xf7bfffff]
[    0.324375] pci 0000:00:03.0: PCI bridge to [bus 01]
[    0.324382] pci 0000:00:03.0:   bridge window [io  0xb000-0xbfff]
[    0.324387] pci 0000:00:03.0:   bridge window [mem 0xf4000000-0xf7bfffff]
[    0.324394] pci 0000:00:03.0:   bridge window [mem 0xe4000000-0xefffffff 64bit pref]
[    0.324457] pci 0000:00:1c.0: PCI bridge to [bus 09]
[    0.324509] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.324561] pci 0000:00:1c.2: PCI bridge to [bus 07]
[    0.324611] pci 0000:00:1c.3: PCI bridge to [bus 06]
[    0.324687] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
[    0.324716] pci 0000:05:00.0: reg 0x10: [mem 0xf7efe000-0xf7efffff 64bit]
[    0.324862] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[    0.327382] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.327391] pci 0000:00:1c.4:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.327463] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.327544] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
[    0.327630] pci 0000:03:00.0: reg 0x24: [mem 0xf7dfe000-0xf7dfffff]
[    0.327698] pci 0000:03:00.0: PME# supported from D3hot
[    0.327758] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[    0.327779] pci 0000:03:00.1: reg 0x10: [io  0xdc00-0xdc07]
[    0.327788] pci 0000:03:00.1: reg 0x14: [io  0xd880-0xd883]
[    0.327798] pci 0000:03:00.1: reg 0x18: [io  0xd800-0xd807]
[    0.327807] pci 0000:03:00.1: reg 0x1c: [io  0xd480-0xd483]
[    0.327817] pci 0000:03:00.1: reg 0x20: [io  0xd400-0xd40f]
[    0.327917] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.327927] pci 0000:00:1c.6: PCI bridge to [bus 03]
[    0.327931] pci 0000:00:1c.6:   bridge window [io  0xd000-0xdfff]
[    0.327934] pci 0000:00:1c.6:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.327999] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.328018] pci 0000:02:00.0: reg 0x10: [io  0xc800-0xc8ff]
[    0.328044] pci 0000:02:00.0: reg 0x18: [mem 0xf2fff000-0xf2ffffff 64bit pref]
[    0.328060] pci 0000:02:00.0: reg 0x20: [mem 0xf2ff8000-0xf2ffbfff 64bit pref]
[    0.328071] pci 0000:02:00.0: reg 0x30: [mem 0xf7cf0000-0xf7cfffff pref]
[    0.328150] pci 0000:02:00.0: supports D1 D2
[    0.328151] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.330392] pci 0000:00:1c.7: PCI bridge to [bus 02]
[    0.330399] pci 0000:00:1c.7:   bridge window [io  0xc000-0xcfff]
[    0.330404] pci 0000:00:1c.7:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.330413] pci 0000:00:1c.7:   bridge window [mem 0xf2f00000-0xf2ffffff 64bit pref]
[    0.330471] pci 0000:0a:04.0: [1106:3044] type 00 class 0x0c0010
[    0.330487] pci 0000:0a:04.0: reg 0x10: [mem 0xf7fff800-0xf7ffffff]
[    0.330496] pci 0000:0a:04.0: reg 0x14: [io  0xec00-0xec7f]
[    0.330563] pci 0000:0a:04.0: supports D2
[    0.330564] pci 0000:0a:04.0: PME# supported from D2 D3hot D3cold
[    0.330628] pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
[    0.330632] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.330635] pci 0000:00:1e.0:   bridge window [mem 0xf7f00000-0xf7ffffff]
[    0.330640] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.330641] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.330643] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.330644] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.330646] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
[    0.330648] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfed8ffff] (subtractive decode)
[    0.331241] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[    0.331283] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[    0.331323] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
[    0.331365] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[    0.331410] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.331452] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
[    0.331494] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[    0.331535] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[    0.331577] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.331609] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[    0.331690] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.331692] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.331693] vgaarb: loaded
[    0.331694] vgaarb: bridge control possible 0000:01:00.0
[    0.331757] SCSI subsystem initialized
[    0.331789] libata version 3.00 loaded.
[    0.331817] ACPI: bus type USB registered
[    0.331832] usbcore: registered new interface driver usbfs
[    0.331840] usbcore: registered new interface driver hub
[    0.331858] usbcore: registered new device driver usb
[    0.331939] PCI: Using ACPI for IRQ routing
[    0.333118] PCI: Discovered peer bus 3f
[    0.333119] PCI: root bus 3f: using default resources
[    0.333120] PCI: Probing PCI hardware (bus 3f)
[    0.333146] PCI host bridge to bus 0000:3f
[    0.333148] pci_bus 0000:3f: root bus resource [io  0x0000-0xffff]
[    0.333150] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
[    0.333151] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
[    0.333154] pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[    0.333160] pci 0000:3f:00.0: [8086:2c51] type 00 class 0x060000
[    0.333198] pci 0000:3f:00.1: [8086:2c81] type 00 class 0x060000
[    0.333236] pci 0000:3f:02.0: [8086:2c90] type 00 class 0x060000
[    0.333271] pci 0000:3f:02.1: [8086:2c91] type 00 class 0x060000
[    0.333308] pci 0000:3f:03.0: [8086:2c98] type 00 class 0x060000
[    0.333342] pci 0000:3f:03.1: [8086:2c99] type 00 class 0x060000
[    0.333380] pci 0000:3f:03.4: [8086:2c9c] type 00 class 0x060000
[    0.333416] pci 0000:3f:04.0: [8086:2ca0] type 00 class 0x060000
[    0.333451] pci 0000:3f:04.1: [8086:2ca1] type 00 class 0x060000
[    0.333485] pci 0000:3f:04.2: [8086:2ca2] type 00 class 0x060000
[    0.333521] pci 0000:3f:04.3: [8086:2ca3] type 00 class 0x060000
[    0.333557] pci 0000:3f:05.0: [8086:2ca8] type 00 class 0x060000
[    0.333592] pci 0000:3f:05.1: [8086:2ca9] type 00 class 0x060000
[    0.333628] pci 0000:3f:05.2: [8086:2caa] type 00 class 0x060000
[    0.333663] pci 0000:3f:05.3: [8086:2cab] type 00 class 0x060000
[    0.333707] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
[    0.333709] pci_bus 0000:3f: busn_res: can not insert [bus 3f] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[    0.333712] PCI: pci_cache_line_size set to 64 bytes
[    0.333785] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.333786] e820: reserve RAM buffer [mem 0xdfe70000-0xdfffffff]
[    0.333880] NetLabel: Initializing
[    0.333882] NetLabel:  domain hash size = 128
[    0.333882] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.333895] NetLabel:  unlabeled traffic allowed by default
[    0.333961] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[    0.333967] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
[    0.333971] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.336018] hpet: hpet2 irq 24 for MSI
[    0.336055] hpet: hpet3 irq 25 for MSI
[    0.336089] hpet: hpet4 irq 26 for MSI
[    0.336125] hpet: hpet5 irq 27 for MSI
[    0.336155] Switched to clocksource hpet
[    0.341809] pnp: PnP ACPI init
[    0.341884] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.341887] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.341948] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.342105] system 00:02: [io  0x0290-0x029f] has been reserved
[    0.342108] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.342289] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.342291] system 00:03: [io  0x0800-0x087f] could not be reserved
[    0.342293] system 00:03: [io  0x0500-0x057f] has been reserved
[    0.342294] system 00:03: [io  0x0600-0x0607] has been reserved
[    0.342297] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.342298] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.342300] system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved
[    0.342302] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.342393] system 00:04: [mem 0xffc00000-0xffdfffff] has been reserved
[    0.342396] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.342552] pnp 00:05: [dma 0 disabled]
[    0.342595] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.342687] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.342690] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.342692] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.342770] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.342773] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.342919] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.342921] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.342923] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.342925] system 00:08: [mem 0x00100000-0xdfffffff] could not be reserved
[    0.342927] system 00:08: [mem 0xfed90000-0xffffffff] could not be reserved
[    0.342929] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.343026] pnp: PnP ACPI: found 9 devices
[    0.349700] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 09] add_size 1000
[    0.349703] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000
[    0.349705] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 09] add_size 200000
[    0.349712] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 08] add_size 1000
[    0.349714] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
[    0.349716] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 200000
[    0.349723] pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 07] add_size 1000
[    0.349725] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000
[    0.349727] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000
[    0.349733] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 06] add_size 1000
[    0.349735] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
[    0.349737] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000
[    0.349768] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.349770] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.349772] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.349774] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.349775] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.349777] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.349779] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.349781] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.349782] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.349784] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.349786] pci 0000:00:1c.2: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.349787] pci 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.349792] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe0000000-0xe01fffff]
[    0.349796] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe0200000-0xe03fffff 64bit pref]
[    0.349798] pci 0000:00:1c.1: BAR 14: assigned [mem 0xe0400000-0xe05fffff]
[    0.349802] pci 0000:00:1c.1: BAR 15: assigned [mem 0xe0600000-0xe07fffff 64bit pref]
[    0.349804] pci 0000:00:1c.2: BAR 14: assigned [mem 0xe0800000-0xe09fffff]
[    0.349808] pci 0000:00:1c.2: BAR 15: assigned [mem 0xe0a00000-0xe0bfffff 64bit pref]
[    0.349810] pci 0000:00:1c.3: BAR 14: assigned [mem 0xe0c00000-0xe0dfffff]
[    0.349813] pci 0000:00:1c.3: BAR 15: assigned [mem 0xe0e00000-0xe0ffffff 64bit pref]
[    0.349816] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.349818] pci 0000:00:1c.1: BAR 13: assigned [io  0x2000-0x2fff]
[    0.349820] pci 0000:00:1c.2: BAR 13: assigned [io  0x3000-0x3fff]
[    0.349822] pci 0000:00:1c.3: BAR 13: assigned [io  0x4000-0x4fff]
[    0.349825] pci 0000:00:03.0: PCI bridge to [bus 01]
[    0.349828] pci 0000:00:03.0:   bridge window [io  0xb000-0xbfff]
[    0.349831] pci 0000:00:03.0:   bridge window [mem 0xf4000000-0xf7bfffff]
[    0.349834] pci 0000:00:03.0:   bridge window [mem 0xe4000000-0xefffffff 64bit pref]
[    0.349837] pci 0000:00:1c.0: PCI bridge to [bus 09]
[    0.349839] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.349843] pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xe01fffff]
[    0.349846] pci 0000:00:1c.0:   bridge window [mem 0xe0200000-0xe03fffff 64bit pref]
[    0.349851] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.349853] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.349857] pci 0000:00:1c.1:   bridge window [mem 0xe0400000-0xe05fffff]
[    0.349860] pci 0000:00:1c.1:   bridge window [mem 0xe0600000-0xe07fffff 64bit pref]
[    0.349864] pci 0000:00:1c.2: PCI bridge to [bus 07]
[    0.349867] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.349870] pci 0000:00:1c.2:   bridge window [mem 0xe0800000-0xe09fffff]
[    0.349874] pci 0000:00:1c.2:   bridge window [mem 0xe0a00000-0xe0bfffff 64bit pref]
[    0.349878] pci 0000:00:1c.3: PCI bridge to [bus 06]
[    0.349881] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.349884] pci 0000:00:1c.3:   bridge window [mem 0xe0c00000-0xe0dfffff]
[    0.349887] pci 0000:00:1c.3:   bridge window [mem 0xe0e00000-0xe0ffffff 64bit pref]
[    0.349892] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.349896] pci 0000:00:1c.4:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.349902] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.349911] pci 0000:00:1c.6: PCI bridge to [bus 03]
[    0.349913] pci 0000:00:1c.6:   bridge window [io  0xd000-0xdfff]
[    0.349917] pci 0000:00:1c.6:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.349923] pci 0000:00:1c.7: PCI bridge to [bus 02]
[    0.349925] pci 0000:00:1c.7:   bridge window [io  0xc000-0xcfff]
[    0.349929] pci 0000:00:1c.7:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.349932] pci 0000:00:1c.7:   bridge window [mem 0xf2f00000-0xf2ffffff 64bit pref]
[    0.349937] pci 0000:00:1e.0: PCI bridge to [bus 0a]
[    0.349939] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.349943] pci 0000:00:1e.0:   bridge window [mem 0xf7f00000-0xf7ffffff]
[    0.349950] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.349951] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.349953] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.349954] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.349956] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff]
[    0.349957] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfed8ffff]
[    0.349959] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.349961] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf7bfffff]
[    0.349962] pci_bus 0000:01: resource 2 [mem 0xe4000000-0xefffffff 64bit pref]
[    0.349964] pci_bus 0000:09: resource 0 [io  0x1000-0x1fff]
[    0.349965] pci_bus 0000:09: resource 1 [mem 0xe0000000-0xe01fffff]
[    0.349967] pci_bus 0000:09: resource 2 [mem 0xe0200000-0xe03fffff 64bit pref]
[    0.349969] pci_bus 0000:08: resource 0 [io  0x2000-0x2fff]
[    0.349970] pci_bus 0000:08: resource 1 [mem 0xe0400000-0xe05fffff]
[    0.349972] pci_bus 0000:08: resource 2 [mem 0xe0600000-0xe07fffff 64bit pref]
[    0.349973] pci_bus 0000:07: resource 0 [io  0x3000-0x3fff]
[    0.349975] pci_bus 0000:07: resource 1 [mem 0xe0800000-0xe09fffff]
[    0.349976] pci_bus 0000:07: resource 2 [mem 0xe0a00000-0xe0bfffff 64bit pref]
[    0.349978] pci_bus 0000:06: resource 0 [io  0x4000-0x4fff]
[    0.349979] pci_bus 0000:06: resource 1 [mem 0xe0c00000-0xe0dfffff]
[    0.349981] pci_bus 0000:06: resource 2 [mem 0xe0e00000-0xe0ffffff 64bit pref]
[    0.349983] pci_bus 0000:05: resource 1 [mem 0xf7e00000-0xf7efffff]
[    0.349984] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.349986] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
[    0.349988] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    0.349989] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.349991] pci_bus 0000:02: resource 2 [mem 0xf2f00000-0xf2ffffff 64bit pref]
[    0.349992] pci_bus 0000:0a: resource 0 [io  0xe000-0xefff]
[    0.349994] pci_bus 0000:0a: resource 1 [mem 0xf7f00000-0xf7ffffff]
[    0.349995] pci_bus 0000:0a: resource 4 [io  0x0000-0x0cf7]
[    0.349997] pci_bus 0000:0a: resource 5 [io  0x0d00-0xffff]
[    0.349998] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[    0.350000] pci_bus 0000:0a: resource 7 [mem 0x000d0000-0x000dffff]
[    0.350001] pci_bus 0000:0a: resource 8 [mem 0xe0000000-0xf7ffffff]
[    0.350003] pci_bus 0000:0a: resource 9 [mem 0xfc000000-0xfed8ffff]
[    0.350005] pci_bus 0000:3f: resource 4 [io  0x0000-0xffff]
[    0.350007] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
[    0.350036] NET: Registered protocol family 2
[    0.350230] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.350469] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.350807] TCP: Hash tables configured (established 65536 bind 65536)
[    0.350836] TCP: reno registered
[    0.350849] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.350906] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.351010] NET: Registered protocol family 1
[    0.351339] pci 0000:01:00.0: Video device with shadowed ROM
[    0.351488] PCI: CLS 32 bytes, default 64
[    0.351533] Unpacking initramfs...
[    0.583264] Freeing initrd memory: 17052K (ffff880035ea3000 - ffff880036f4a000)
[    0.583282] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.583284] software IO TLB [mem 0xdbe70000-0xdfe70000] (64MB) mapped at [ffff8800dbe70000-ffff8800dfe6ffff]
[    0.583527] microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x7
[    0.583533] microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x7
[    0.583539] microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x7
[    0.583545] microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x7
[    0.583596] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.584304] futex hash table entries: 4096 (order: 6, 262144 bytes)
[    0.584359] Initialise system trusted keyring
[    0.584382] audit: initializing netlink subsys (disabled)
[    0.584396] audit: type=2000 audit(1425373014.368:1): initialized
[    0.584698] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.585987] zpool: loaded
[    0.585989] zbud: loaded
[    0.586163] VFS: Disk quotas dquot_6.5.2
[    0.586198] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.586529] msgmni has been set to 15958
[    0.586585] Key type big_key registered
[    0.586588] SELinux:  Registering netfilter hooks
[    0.587451] alg: No test for stdrng (krng)
[    0.587460] NET: Registered protocol family 38
[    0.587467] Key type asymmetric registered
[    0.587469] Asymmetric key parser 'x509' registered
[    0.587502] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.587541] io scheduler noop registered
[    0.587543] io scheduler deadline registered
[    0.587570] io scheduler cfq registered (default)
[    0.587789] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[    0.587879] pcieport 0000:00:1c.1: enabling device (0104 -> 0107)
[    0.587966] pcieport 0000:00:1c.2: enabling device (0104 -> 0107)
[    0.588057] pcieport 0000:00:1c.3: enabling device (0104 -> 0107)
[    0.588461] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.588475] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.588515] intel_idle: MWAIT substates: 0x1120
[    0.588520] intel_idle: v0.4 model 0x1E
[    0.588521] intel_idle: lapic_timer_reliable_states 0x2
[    0.588707] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.588710] ACPI: Power Button [PWRB]
[    0.588743] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.588745] ACPI: Power Button [PWRF]
[    0.588921] GHES: HEST is not enabled!
[    0.588994] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.609594] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.610033] Non-volatile memory driver v1.3
[    0.610036] Linux agpgart interface v0.103
[    0.610172] ahci 0000:03:00.0: version 3.0
[    0.620618] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    0.620626] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    0.621296] scsi host0: ahci
[    0.621938] scsi host1: ahci
[    0.622039] ata1: SATA max UDMA/133 abar m8192@0xf7dfe000 port 0xf7dfe100 irq 18
[    0.622044] ata2: SATA max UDMA/133 abar m8192@0xf7dfe000 port 0xf7dfe180 irq 18
[    0.622085] ata_piix 0000:00:1f.2: version 2.13
[    0.622159] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.623295] scsi host2: ata_piix
[    0.623632] scsi host3: ata_piix
[    0.623730] ata3: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 21
[    0.623734] ata4: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 21
[    0.623810] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.624831] scsi host4: ata_piix
[    0.625226] scsi host5: ata_piix
[    0.625309] ata5: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 21
[    0.625314] ata6: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 21
[    0.625404] libphy: Fixed MDIO Bus: probed
[    0.625562] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    0.625668] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 1
[    0.625853] xhci_hcd 0000:05:00.0: irq 29 for MSI/MSI-X
[    0.625858] xhci_hcd 0000:05:00.0: irq 30 for MSI/MSI-X
[    0.625862] xhci_hcd 0000:05:00.0: irq 31 for MSI/MSI-X
[    0.625866] xhci_hcd 0000:05:00.0: irq 32 for MSI/MSI-X
[    0.625870] xhci_hcd 0000:05:00.0: irq 33 for MSI/MSI-X
[    0.626532] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.626538] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.626542] usb usb1: Product: xHCI Host Controller
[    0.626546] usb usb1: Manufacturer: Linux 3.18.7-200.fc21.x86_64 xhci-hcd
[    0.626549] usb usb1: SerialNumber: 0000:05:00.0
[    0.627036] hub 1-0:1.0: USB hub found
[    0.627122] hub 1-0:1.0: 2 ports detected
[    0.627626] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    0.627851] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
[    0.629193] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.629195] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.629197] usb usb2: Product: xHCI Host Controller
[    0.629198] usb usb2: Manufacturer: Linux 3.18.7-200.fc21.x86_64 xhci-hcd
[    0.629200] usb usb2: SerialNumber: 0000:05:00.0
[    0.629415] hub 2-0:1.0: USB hub found
[    0.629427] hub 2-0:1.0: 2 ports detected
[    0.629557] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.629563] ehci-pci: EHCI PCI platform driver
[    0.629648] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.629821] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.629840] ehci-pci 0000:00:1a.0: debug port 2
[    0.633779] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
[    0.633791] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf3ffe000
[    0.639612] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.639678] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.639683] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.639687] usb usb3: Product: EHCI Host Controller
[    0.639690] usb usb3: Manufacturer: Linux 3.18.7-200.fc21.x86_64 ehci_hcd
[    0.639694] usb usb3: SerialNumber: 0000:00:1a.0
[    0.640028] hub 3-0:1.0: USB hub found
[    0.640034] hub 3-0:1.0: 2 ports detected
[    0.640204] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.640406] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    0.640425] ehci-pci 0000:00:1d.0: debug port 2
[    0.644346] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
[    0.644359] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3ffd000
[    0.649623] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.649690] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    0.649695] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.649698] usb usb4: Product: EHCI Host Controller
[    0.649702] usb usb4: Manufacturer: Linux 3.18.7-200.fc21.x86_64 ehci_hcd
[    0.649705] usb usb4: SerialNumber: 0000:00:1d.0
[    0.650038] hub 4-0:1.0: USB hub found
[    0.650043] hub 4-0:1.0: 2 ports detected
[    0.650135] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.650141] ohci-pci: OHCI PCI platform driver
[    0.650151] uhci_hcd: USB Universal Host Controller Interface driver
[    0.650192] usbcore: registered new interface driver usbserial
[    0.650197] usbcore: registered new interface driver usbserial_generic
[    0.650204] usbserial: USB Serial support registered for generic
[    0.650230] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.652824] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.652829] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.653073] mousedev: PS/2 mouse device common for all mice
[    0.653988] rtc_cmos 00:01: RTC can wake from S4
[    0.654281] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.654321] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.654405] device-mapper: uevent: version 1.0.3
[    0.654683] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
[    0.655300] hidraw: raw HID events driver (C) Jiri Kosina
[    0.655401] usbcore: registered new interface driver usbhid
[    0.655402] usbhid: USB HID core driver
[    0.655453] drop_monitor: Initializing network drop monitor service
[    0.655558] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.655930] TCP: cubic registered
[    0.655935] Initializing XFRM netlink socket
[    0.656028] NET: Registered protocol family 10
[    0.656211] mip6: Mobile IPv6
[    0.656214] NET: Registered protocol family 17
[    0.657266] Loading compiled-in X.509 certificates
[    0.658240] Loaded X.509 cert 'Fedora kernel signing key: c406af3b4a8ec27de35610fad348e54ba39e284a'
[    0.658255] registered taskstats version 1
[    0.658952]   Magic number: 7:941:926
[    0.659195] rtc_cmos 00:01: setting system clock to 2015-03-03 08:56:54 UTC (1425373014)
[    0.659238] PM: Hibernation image not present or could not be loaded.
[    0.927006] ata1: SATA link down (SStatus 0 SControl 300)
[    0.927045] ata2: SATA link down (SStatus 0 SControl 300)
[    0.941921] ata6: SATA link down (SStatus 0 SControl 300)
[    0.941935] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    0.951984] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    1.056733] usb 3-1: New USB device found, idVendor=8087, idProduct=0020
[    1.056739] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.057259] hub 3-1:1.0: USB hub found
[    1.057455] hub 3-1:1.0: 6 ports detected
[    1.066869] usb 4-1: New USB device found, idVendor=8087, idProduct=0020
[    1.066875] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.067152] hub 4-1:1.0: USB hub found
[    1.067254] hub 4-1:1.0: 8 ports detected
[    1.082161] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.085384] ata5.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
[    1.107345] ata5.00: configured for UDMA/100
[    1.344711] usb 4-1.1: new full-speed USB device number 3 using ehci-pci
[    1.385566] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.385577] ata3.01: SATA link down (SStatus 0 SControl 300)
[    1.385693] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.385704] ata4.01: SATA link down (SStatus 0 SControl 300)
[    1.389079] ata3.00: ATA-8: ST3500418AS, CC38, max UDMA/133
[    1.389085] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.389425] ata4.00: ATA-8: WDC WD10EARS-00MVWB0, 51.0AB51, max UDMA/133
[    1.389431] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.393435] ata4.00: configured for UDMA/133
[    1.394935] ata3.00: configured for UDMA/133
[    1.395367] scsi 2:0:0:0: Direct-Access     ATA      ST3500418AS      CC38 PQ: 0 ANSI: 5
[    1.396090] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.396138] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.396453] sd 2:0:0:0: [sda] Write Protect is off
[    1.396457] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.396605] scsi 3:0:0:0: Direct-Access     ATA      WDC WD10EARS-00M AB51 PQ: 0 ANSI: 5
[    1.396626] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.397048] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.397054] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[    1.397077] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    1.397203] sd 3:0:0:0: [sdb] Write Protect is off
[    1.397205] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.397383] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.401545] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS50  TN02 PQ: 0 ANSI: 5
[    1.418396]  sdb:
[    1.419028] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.424387] usb 4-1.1: New USB device found, idVendor=046d, idProduct=c52b
[    1.424393] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.424397] usb 4-1.1: Product: USB Receiver
[    1.424401] usb 4-1.1: Manufacturer: Logitech
[    1.434182] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.434188] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.434316] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    1.434402] sr 4:0:0:0: Attached scsi generic sg2 type 5
[    1.435420]  sda: sda1 sda2 sda3 sda4 < sda5 >
[    1.437446] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.438820] Freeing unused kernel memory: 1500K (ffffffff81d36000 - ffffffff81ead000)
[    1.438822] Write protecting the kernel read-only data: 12288k
[    1.440552] Freeing unused kernel memory: 588K (ffff88000176d000 - ffff880001800000)
[    1.442385] Freeing unused kernel memory: 820K (ffff880001b33000 - ffff880001c00000)
[    1.443992] random: systemd urandom read with 40 bits of entropy available
[    1.506621] usb 4-1.3: new low-speed USB device number 4 using ehci-pci
[    1.585646] tsc: Refined TSC clocksource calibration: 2808.713 MHz
[    1.587891] usb 4-1.3: New USB device found, idVendor=046d, idProduct=c062
[    1.587894] usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.587896] usb 4-1.3: Product: USB Laser Mouse
[    1.587897] usb 4-1.3: Manufacturer: Logitech
[    1.593804] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.0/0003:046D:C062.0004/input/input5
[    1.593984] hid-generic 0003:046D:C062.0004: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.0-1.3/input0
[    1.614226] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[    1.614819] scsi host6: pata_jmicron
[    1.614910] scsi host7: pata_jmicron
[    1.614954] ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 19
[    1.614955] ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 19
[    1.625344] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.625352] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.625527] r8169 0000:02:00.0: irq 34 for MSI/MSI-X
[    1.625712] r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0xffffc90004ec6000, bc:ae:c5:04:c0:26, XID 083000c0 IRQ 34
[    1.625714] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.639718] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.666900] usb 4-1.4: new full-speed USB device number 5 using ehci-pci
[    1.676775] firewire_ohci 0000:0a:04.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[    1.758321] usb 4-1.4: New USB device found, idVendor=045e, idProduct=028e
[    1.758324] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.758326] usb 4-1.4: Product: Controller
[    1.758328] usb 4-1.4: Manufacturer: ©Microsoft Corporation
[    1.758329] usb 4-1.4: SerialNumber: 39BAE5B
[    1.834240] usb 4-1.5: new low-speed USB device number 6 using ehci-pci
[    1.847624] random: nonblocking pool is initialized
[    1.927043] usb 4-1.5: New USB device found, idVendor=1113, idProduct=3163
[    1.927046] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.927048] usb 4-1.5: Product: MEDION MD 86360
[    1.927050] usb 4-1.5: Manufacturer: SYSGRATION
[    1.931088] input: SYSGRATION MEDION MD 86360 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/0003:1113:3163.0005/input/input6
[    1.931278] hid-generic 0003:1113:3163.0005: input,hidraw1: USB HID v1.00 Keyboard [SYSGRATION MEDION MD 86360] on usb-0000:00:1d.0-1.5/input0
[    1.937403] input: SYSGRATION MEDION MD 86360 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.1/0003:1113:3163.0006/input/input7
[    1.937981] hid-generic 0003:1113:3163.0006: input,hiddev0,hidraw2: USB HID v1.00 Mouse [SYSGRATION MEDION MD 86360] on usb-0000:00:1d.0-1.5/input1
[    1.943924] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input2
[    1.996911] input: Logitech Unifying Device. Wireless PID:4008 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.2/0003:046D:C52B.0003/0003:046D:C52B.0007/input/input8
[    1.997037] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4008] on usb-0000:00:1d.0-1.1:1
[    2.004813] input: Logitech Unifying Device. Wireless PID:4003 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.2/0003:046D:C52B.0003/0003:046D:C52B.0008/input/input9
[    2.005047] logitech-djdevice 0003:046D:C52B.0008: input,hidraw5: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4003] on usb-0000:00:1d.0-1.1:2
[    2.008151] PM: Starting manual resume from disk
[    2.008155] PM: Hibernation image partition 8:3 present
[    2.008156] PM: Looking for hibernation image.
[    2.018832] PM: Image not found (code -22)
[    2.018834] PM: Hibernation image not present or could not be loaded.
[    2.080724] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.178411] firewire_core 0000:0a:04.0: created device fw0: GUID 001fc6000005cec6, S400
[    2.397837] systemd-journald[124]: Received SIGTERM from PID 1 (systemd).
[    2.587227] Switched to clocksource tsc
[    2.740200] audit: type=1404 audit(1425373016.577:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[    2.807499] SELinux: 2048 avtab hash slots, 104708 rules.
[    2.823964] SELinux: 2048 avtab hash slots, 104708 rules.
[    2.850149] SELinux:  8 users, 103 roles, 4987 types, 295 bools, 1 sens, 1024 cats
[    2.850152] SELinux:  83 classes, 104708 rules
[    2.854273] SELinux:  Permission audit_read in class capability2 not defined in policy.
[    2.854278] SELinux: the above unknown classes and permissions will be allowed
[    2.854281] SELinux:  Completing initialization.
[    2.854282] SELinux:  Setting up existing superblocks.
[    2.854286] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[    2.854295] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[    2.854299] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[    2.854349] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    2.854361] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[    2.854851] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[    2.855922] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[    2.855924] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[    2.855928] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[    2.855930] SELinux: initialized (dev aio, type aio), not configured for labeling
[    2.855932] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[    2.855945] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[    2.855950] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[    2.855955] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[    2.855964] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    2.856275] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[    2.856277] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    2.856282] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    2.856345] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    2.856371] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.856375] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
[    2.856377] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.856378] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.856380] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.856386] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.856389] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.856390] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.856392] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.856397] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.856399] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.856401] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[    2.856408] SELinux: initialized (dev sda2, type ext4), uses xattr
[    2.860553] audit: type=1403 audit(1425373016.697:3): policy loaded auid=4294967295 ses=4294967295
[    2.889019] systemd[1]: Successfully loaded SELinux policy in 156.056ms.
[    3.002923] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[    3.029735] systemd[1]: Relabelled /dev and /run in 17.944ms.
[    4.327767] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[    4.419144] systemd-readahead[388]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[    5.057047] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[    5.057074] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    5.428463] RPC: Registered named UNIX socket transport module.
[    5.428465] RPC: Registered udp transport module.
[    5.428466] RPC: Registered tcp transport module.
[    5.428467] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    5.428986] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
[    6.111097] EXT4-fs (sda2): re-mounted. Opts: (null)
[    6.641992] systemd-journald[391]: Received request to flush runtime journal from PID 1
[    6.689304] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    6.689948] SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
[   10.826142] ATK0110 ATK0110:00: EC enabled
[   10.984132] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.307104] EDAC MC: Ver: 3.0.0
[   11.311270] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000084f (\PMRG) (20140926/utaddress-258)
[   11.311275] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.311278] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000053f (\GPS1) (20140926/utaddress-258)
[   11.311281] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000053f (\GPS0) (20140926/utaddress-258)
[   11.311284] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.311285] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000053f (\GPS1) (20140926/utaddress-258)
[   11.311287] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000053f (\GPS0) (20140926/utaddress-258)
[   11.311289] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.311308] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   11.389674] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[   11.434347] [drm] Initialized drm 1.1.0 20060810
[   11.557435] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED)
[   11.557471] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
[   11.557477] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[   11.698127] iTCO_vendor_support: vendor-support=0
[   11.722278] gpio_ich: GPIO from 436 to 511 on gpio_ich
[   11.770689] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[   12.047637] snd_hda_intel 0000:00:1b.0: irq 35 for MSI/MSI-X
[   12.047716] snd_hda_intel 0000:01:00.1: Disabling MSI
[   12.047723] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   12.058370] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   12.058393] iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0860)
[   12.058618] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   12.067016] sound hdaudioC0D0: autoconfig: line_outs=4 (0x24/0x25/0x26/0x27/0x0) type:line
[   12.067019] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   12.067021] sound hdaudioC0D0:    hp_outs=1 (0x28/0x0/0x0/0x0/0x0)
[   12.067022] sound hdaudioC0D0:    mono: mono_out=0x0
[   12.067023] sound hdaudioC0D0:    dig-out=0x2d/0x2e
[   12.067025] sound hdaudioC0D0:    inputs:
[   12.067027] sound hdaudioC0D0:      Front Mic=0x29
[   12.067028] sound hdaudioC0D0:      Rear Mic=0x2b
[   12.067030] sound hdaudioC0D0:      Line=0x2a
[   12.067031] sound hdaudioC0D0:      CD=0x2c
[   12.077394] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   12.077480] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   12.077935] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   12.078721] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   12.078899] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   12.078967] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   12.079045] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   12.079128] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   12.268413] nvidia: module license 'NVIDIA' taints kernel.
[   12.268415] Disabling lock debugging due to kernel taint
[   12.273431] nvidia: module verification failed: signature and/or  required key missing - tainting kernel
[   12.278269] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   12.278493] SELinux: initialized (dev drm, type drm), not configured for labeling
[   12.278676] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[   12.278685] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  340.76  Thu Jan 22 12:11:08 PST 2015
[   12.354203] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input18
[   12.354281] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input19
[   12.354364] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input20
[   12.354435] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input21
[   14.022100] Adding 8388604k swap on /dev/sda3.  Priority:-1 extents:1 across:8388604k FS
[   14.254237] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   14.254244] SELinux: initialized (dev sda5, type ext4), uses xattr
[   14.278149] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   14.322516] SELinux: initialized (dev sda1, type ext4), uses xattr
[   14.792579] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.4/4-1.4:1.0/input/input22
[   14.792841] usbcore: registered new interface driver xpad
[   15.422940] audit: type=1305 audit(1425369429.245:4): audit_pid=621 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
[   16.841410] vboxdrv: Found 4 processor cores.
[   16.841735] vboxdrv: fAsync=0 offMin=0x24f offMax=0x22ec
[   16.841810] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   16.841811] vboxdrv: Successfully loaded version 4.3.22 (interface 0x001a0009).
[   16.921232] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   16.937325] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   16.969409] Ebtables v2.0 registered
[   16.984226] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   17.050994] vboxpci: IOMMU not found (not registered)
[   17.265986] r8169 0000:02:00.0 enp2s0: link down
[   17.265996] r8169 0000:02:00.0 enp2s0: link down
[   19.310997] r8169 0000:02:00.0 enp2s0: link up
[   24.976676] nvidia 0000:01:00.0: irq 36 for MSI/MSI-X
[   26.013896] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[   69.627542] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[   90.888461] Bluetooth: Core ver 2.19
[   90.888526] NET: Registered protocol family 31
[   90.888527] Bluetooth: HCI device and connection manager initialized
[   90.888535] Bluetooth: HCI socket layer initialized
[   90.888537] Bluetooth: L2CAP socket layer initialized
[   90.888542] Bluetooth: SCO socket layer initialized
[   90.972221] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   90.972223] Bluetooth: BNEP filters: protocol multicast
[   90.972230] Bluetooth: BNEP socket layer initialized
[   91.108353] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[  247.611805] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[  881.703916] ACPI : EC: GPE storm detected(9 GPEs), transactions will use polling mode
[ 1517.828804] EXT4-fs (sdb): warning: maximal mount count reached, running e2fsck is recommended
[ 1517.832453] EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null)
[ 1517.832460] SELinux: initialized (dev sdb, type ext4), uses xattr
[ 1778.770464] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 1934.680948] perf interrupt took too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 2011.076021] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 2991.964745] usb 4-1.3: USB disconnect, device number 4
[ 2992.160890] usb 4-1.3: new low-speed USB device number 7 using ehci-pci
[ 2992.253255] usb 4-1.3: New USB device found, idVendor=046d, idProduct=c062
[ 2992.253262] usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2992.253266] usb 4-1.3: Product: USB Laser Mouse
[ 2992.253270] usb 4-1.3: Manufacturer: Logitech
[ 2992.259027] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.0/0003:046D:C062.0009/input/input23
[ 2992.259845] hid-generic 0003:046D:C062.0009: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.0-1.3/input0
[ 2993.246308] usb 4-1.3: USB disconnect, device number 7
[ 2993.442379] usb 4-1.3: new low-speed USB device number 8 using ehci-pci
[ 2993.534357] usb 4-1.3: New USB device found, idVendor=046d, idProduct=c062
[ 2993.534364] usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2993.534368] usb 4-1.3: Product: USB Laser Mouse
[ 2993.534372] usb 4-1.3: Manufacturer: Logitech
[ 2993.539784] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.0/0003:046D:C062.000A/input/input24
[ 2993.540569] hid-generic 0003:046D:C062.000A: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.0-1.3/input0
[ 2994.844946] usb 3-1.2: new high-speed USB device number 3 using ehci-pci
[ 2994.932310] usb 3-1.2: New USB device found, idVendor=04a9, idProduct=173b
[ 2994.932317] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2994.932321] usb 3-1.2: Product: MP270 series
[ 2994.932324] usb 3-1.2: Manufacturer: Canon
[ 2994.932328] usb 3-1.2: SerialNumber: 82F63D
[ 2994.998808] usblp 3-1.2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x173B
[ 2994.998832] usbcore: registered new interface driver usblp
[ 2996.117965] usblp0: removed
[ 2996.121635] usblp 3-1.2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x173B
Regarde si en lançant en root ça fonctionne.
Regarde si en lançant en root ça fonctionne.
Idem, rien ...
J'ai réinstallé les rpm du site canon mais toujours rien. Si, j'ai une dépendance manquante 
Paquet : cnijfilter-mp270series-3.20-1.i386 (/cnijfilter-mp270series-3.20-1.i386)
             Requiert : libtiff.so.3
 Vous pouvez essayer d'utiliser --skip-broken pour contourner le problème
 Vous pouvez essayer d'exécuter : rpm -Va --nofiles --nodigest
Sujet déjà abordé ici
Comme je vais réinstallé Fedo du fait d'un disque peut-être défectueux, j'ai tenté l'installation de la dépendance via rpm.pbone (version pour fedora 21, mais toujours rien, cnijfilter-mp270series-3.20-1.i386.rpm
 ne veut pas s'installer. Je poursuis mes recherches mais si vous avez une idée je prends !
Fait un updatedb en root et un locate nomdelalib.
Puis tu fais un lien avec le nom que cherche le paquet.
Fait un updatedb en root et un locate nomdelalib.
Puis tu fais un lien avec le nom que cherche le paquet.
je note ... je tenterai sur le portable là je suis en "test" avec gnome sur l'ordi concerné et je te confirme que sous Gnome cela fonctionne "out of the box" avec simple-scan mais pas avec skanlite.
Bonjour, fais voir le résultat de la commande: 
$ lsmod
mtirabo wrote: Bonjour, fais voir le résultat de la commande:

$ lsmod
Bonjour mtirabo,
Je viens de changer de DD et donc réinstallé Fedora et Gnome avec qui le problème ne se pose pas.
Vraiment bizarre, même simple scan devrait fonctionner sous KDE. Si c'est sur la même machine.

Sachant que t'avais pas besoin du pilote de canon, car ton combi est supporté par sane!
http://www.sane-project.org/sane-mfgs.html#Z-CANON
Comme tu dis ... J'avais vu ça également. Mais bon avec ce changement de DD je retrouve mes marques avec Gnome (et quelques soft kde indispensables tout de même) et le scanner fonctionne donc ...
Dois-je placer le sujet en RéSOLU ??? :-? :-D
Un grand merci à vous pour votre aide, bien que je ne capte toujours pas le pourquoi du comment
Merci
Faudrait installer KDE en // (cela n'influence rien, ça prend juste de la place) pour voir si le problème persiste. A mon avis ton installation ne devait pas être "très fraiche".

Tant que c'est pas confirmé laisse ouvert.

Cela ma permis de voir que mon combi avait enfin le support du scanner par sane 🙂. J'ai hâte de le tester n'ayant pas le combi ici.
Faudrait installer KDE en // (cela n'influence rien, ça prend juste de la place) pour voir si le problème persiste. A mon avis ton installation ne devait pas être "très fraiche".
J'ai eu pour habitude de faire ça, mais là pas trop envie ... Peut-être plus tard. Je vais essayer en VM (si ça marche)
L'installation était méga fraiche, mais peut-être un désavantage de ne plus avoir de version DVD qui offre peut-être plus de "support" après installation ?
J'ai été un moment sous kde Fedora au début j'avais la même imprimante/scanner et je ne me souviens pas de ce problème. De plus comme c'est les vacances (encore un peu) j'avais installé la version kde également sur le portable, 2 installations Fraiches et le me problème à chaque fois ...
Tant que c'est pas confirmé laisse ouvert.
ok !
Il faut vérifier les paquets installé, à tout les coups tu n'avais pas ce qui faut pour sane. Pour des raisons de place tout n'est pas dessus, sans compter que c'est fragmenter en x versions.

Perso je prend plus la version DVD, habitude prise quand on faisait que du gravage DVD/CD et le passage sur clef usb qui étaient de faible capacité (max 2Go à l'époque). Après j'ai pas des connexions en carton (même si je pourrai avoir mieux), donc je me pose pas trop la question.

Bah ça te prendra moins de temps de mettre KDE et de dire à ton gdm/sdm/kdm de lancer cet environnement, que de monter en VM etc... C'est juste pour confirmer si c'était un paquet manquant ou autre chose.
Bah ça te prendra moins de temps de mettre KDE et de dire à ton gdm/sdm/kdm de lancer cet environnement
Mouais ... MAis je n'ai pas envie de me retrouver avec toute la compagnie kde ... Même si j'adore aussi cet envirronement. Je prendrai le temps d'une VM je pense ...
A suivre
merci !
Tu désinstalle par la suite. C'est rien.
Tu désinstalle par la suite. C'est rien.
Dis moi cher VINDICATORs, c'est presque du lobbying là ! 😉 :hammer:
Non c'est surtout que je pige pas pourquoi tu veux remonter un système virtuel juste pour tester kde, alors que ça prend moins de temps et moins de ressource de l'installer et de le sélectionner par la suite.

En plus j'aimerai savoir si ça confirme ce défaut de paquet ou si c'est du à KDE en lui même.
Salut,
Non c'est surtout que je pige pas pourquoi tu veux remonter un système virtuel juste pour tester kde, alors que ça prend moins de temps et moins de ressource de l'installer et de le sélectionner par la suite.
En plus j'aimerai savoir si ça confirme ce défaut de paquet ou si c'est du à KDE en lui même.
C'était une plaisanterie avec un arrière arrière fond de vieux troll bien sur 🙂
J'ai de la place pour des VM et j'aime essayer d'autres "versions originales" de Fedora. Si je m'intéresse à sa version KDE j'essaie d'installer la version kde out of the box justement pour voir qu'est-ce qui marche ... ou pas. Si je veux essayer cinnamon Idem et Idem pour les autres versions. Cela me parait plus clair. J'ai eu fait des cohabitations de DE mais je me souviens de Tracker activé sous la session kde et qui tournait à fond ou d'autres processus engagé pour rien. LA dernière fois que j'ai essayé (peu de temps) il est vrai que je ne retrouvais pas ces problèmes.
Dès que j'ai ce temps je te donne les retours.
Merci VINDICATORs
Le souci avec les vm c'est que parfois ça fausses les résultats pour x raisons.

Enfin bon pas de souci 😉. Mais j'aime pas ne pas avoir fini de savoir le pourquoi du comment. Je vais tester de mon coté quand j'aurai accès à la machine avec l'imprimante dont je vient de voir qu'elle était maintenant supporté niveau scanner. Ce sujet m'aura appris cela 😉.
14 jours plus tard
Bonjour tout le monde,
Juste une bricole, qui pourrait vous intéresser peut-être. Bien que je n'aie pas pris le temps de lire tout le fil de la discussion.
J'ai eu un souci similaire faire reconnaître un scanner et une imprimante sous xfce, alors que sous gnome, ça roulait tout seul (mais sans carte graphique .... bref).

Je suis allé dans les configuration des fichiers sous xsane. Il y a un répertoire (je ne me souviens plus très bien où), avec des listes de fichiers par marque d'imprimante. Aussi, il y a un autre fichier qui contient la config, du genre xsane.conf, oui quelque chose comme cela.
A l'intérieur de l'un des deux fichiers (désolé, ce n'est pas très précis, je ne suis pas sur la machine), on peut configurer l'IP de l'imprimante ou celle du scanner. Il suffit de la mettre (tu peux l'avoir par ta livebox par exemple). De redémarrer le deamon (systemctl restart xsaned, ou quelque chose du genre ...)
Bref, juste pour dire, que ce n'était pour moi qu'un souci d'IP.
A+
Oki c'est une bonne information à prendre 🙂.

Merci bien 🙂.

Perso j'ai pas eu l'occasion de regarder sur celle que j'ai chez mon autre chez moi.
6 mois plus tard
Problème résolu ... Mais je ne peux pas démontrer exactement pourquoi.
Je suis actuellement sous Korora 22 (kde), le scanner ne fonctionnait pas au début (l'imprimante oui). J'ai installé Xsane, simple-scan mais le problème persistait. Essayé de lancer ces logiciels dans Konsole après avoir désactiver SElinux ET CHANGER de port usb (j'avais pourtant - je crois - effectué l'opération les dernières fois).
Cela a fonctionné dans l'ordre avec Xsane > simple-scan et skanlite
Cela fonctionne également avec Selinux réactivé
Skanlite lors des 1eres tentatives reconnaissait le périphérique, une fenêtre contextuelle apparaissait très rapidement en affichant MP270 Canon quelque chose mais finissait par dire qu'il n'était pas possible d'y avoir accès.
Je ne sais pas si Korora qui n'est q'un Fedora retravaillé embarque des paquets m'ayant permis de résoudre le problème - ce dont je doute puisque cela ne fonctionnait pas après installation et MAJ.
merci
Bonne journée
8 mois plus tard
titijhajha wrote:Problème résolu ... Mais je ne peux pas démontrer exactement pourquoi.
Déterrage de topic et complément d'info, si ça peut servir ...

Je me suis sorti d'un problème similaire (avec une Pixma MP560 sous Fedora 23 avec un environnement autre que Gnome), en suivant votre discussion (merci aux intervenants) et en réinstallant les paquets suivants avec SElinux désactivé: xsane, sane-backends-libs et mes deux rpm scangear fournis par Canon. Ce qui n'a pas suffit dans un premier temps, je ne pense pas que ce soit SElinux qui pose problème.
J'ai rajouté les paquets sane-backends et sane-backends-drivers-scanners, et là, xsane a commencé à vraiment chercher sérieusement un périphérique.
J'ai d'abords eu une erreur du genre "le périphérique Pixma est occupé". C'est là que je me suis dit que je tiens le bon bout, au moins il le voit.
J'ai redémarré tout le monde et depuis ça fonctionne nickel 8-)

Merci encore aux intervenants de ce fil. Sans vous, je ne sais pas si j'aurais eu l'inspiration de faire un "dnf search sane" pour débusquer les paquets manquants 😉