Fedora-Fr

benja85 · 2010-08-03T13:39:58+00:00

Bonjour à tous, Je ne sais pas trop si je peux poster ici... Voilà j'ai acheté il y a quelques temps un magazine Fedora 11 avec les DVD, depuis je l'ai inst...

Ce site est optimisé pour être consulté depuis un navigateur moderne dans lequel JavaScript est activé.

installation fedora

benja85

l'install en dual boot s'est bien passé, le démarrage est toujors très long chrono en main 9mn45...
smartctl --test=short /dev/sda
smartctl 5.39.1 2010-01-28 r3054 [x86_64-redhat-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in off-line mode".
Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 1 minutes for test to complete.
Test will complete after Fri Aug 27 00:23:19 2010

Use smartctl -X to abort test.

cela fait une heure et pas de résultat..

impaire

benja85 wrote:l'install en dual boot s'est bien passé, le démarrage est toujors très long chrono en main 9mn45...
smartctl --test=short /dev/sda
smartctl 5.39.1 2010-01-28 r3054 [x86_64-redhat-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in off-line mode".
Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 1 minutes for test to complete.
Test will complete after Fri Aug 27 00:23:19 2010

Use smartctl -X to abort test.

cela fait une heure et pas de résultat..

Si vous le relancez à chaque fois, il va systématiquement vous dire d'attendre... smartctl --all /dev/sda

Pour le délais, on verra après.

impaire

D'après ce que vous avez collé en page précédente, vous avez toujours des problèmes avec ce disque. Ecrire zéro partout n'a rien changé. Ca fait deux heures que vous refaites ces tests et il apparait encore des erreurs:

  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0

  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       826


Error 13330 occurred at disk power-on lifetime: 825 hours (34 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.


SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed: read failure       90%       825         976773167
# 2  Short offline       Completed: read failure       90%       825         976773167
# 3  Short offline       Completed: read failure       90%       825         976773167
# 4  Short offline       Completed: read failure       90%       824         976773167
# 5  Extended offline    Completed: read failure       90%       760         976773167

Copié là, de votre précédent post: http://forums.fedora-fr.org/viewtopic.php?pid=428557#p428557

benja85

qu'est ce qu'il faut que je fasse exactement ?

impaire

benja85 wrote:qu'est ce qu'il faut que je fasse exactement ?

Je pense que vous l'avez déjà fait. Dans l'ordre:

- smartctl --test=short /dev/sda

- deux minutes plus tard, smartctl --all /dev/sda

D'après les résultats que vous avez déjà collés, le fait de formater le disque n'a rien changé. Les tests échouent encore. Ca me surprend. Ca me surprend d'autant plus qu'avec la commande dd vous aviez pu écrire partout, sur tout le disque. Et il n'y a aucun secteur defectueux suite à cette écriture sur 500Go.

Je pense que Seagate vous dirait d'envoyer ce disque en répération ou pour échange.

  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0

benja85

mais qu'est ce qui ne colle pas.
ce demarrage très poussif peut-être dû à quoi?

impaire

Il y a une différence avec ce que j'avais fait. Mon disque était connecté sur un port USB, pour le formater. Cet autre PC ne s'était pas planté.

benja85 wrote:voilà ce que j'ai ; dd: writing " /dev/sda" : aucun espace disponible sur le peripherique
476941+0 records in
476940 redords out
500107862016 bytes (500GB) copied, , 14824.8 s, 33.7 MB/s
bash-4.1# init [1] : segaukt at 0 ip (null) sp 00007c691880 error 14 in init[400000]
init [1] segfault at 0 io (null) sp 00007c6912b8 error 14 in init [400000+5000]
kernel panic - not syncing : Attempted to kill init!
le tiret en dessous ne clignote pas

par contre je ne peux plus ecrire dedans...

impaire

benja85 wrote:mais qu'est ce qui ne colle pas.
ce demarrage très poussif peut-être dû à quoi?

Pendant le démarrage de la Fedora, appuyez sur la touche Echap. Au lieu de l'écran bleu du démarrage, du texte va défiler. Notez ce qui apparait, par exemple, lorsque le défilement s'interrompt.

Ou vous avez juste des flots d'erreurs, à l'écran?

Actuellement, sous Linux, après un démarrage lent, vous pouvez faire ceci, éventuellement avec more, ou vers des fichiers:

# dmesg

# tail /var/log/messages

# cat /var/log/messages

benja85

dmseg

ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:08:28:60:38/00:00:3a:00:00/40 tag 1 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Unhandled sense code
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
3a 38 60 2f
sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
sd 0:0:0:0: [sda] CDB: Read(10): 28 00 3a 38 60 28 00 00 08 00
end_request: I/O error, dev sda, sector 976773167
Buffer I/O error on device sda, logical block 122096645
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/36:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Unhandled sense code
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
3a 38 60 2f
sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
sd 0:0:0:0: [sda] CDB: Read(10): 28 00 3a 38 60 28 00 00 08 00
end_request: I/O error, dev sda, sector 976773167
Buffer I/O error on device sda, logical block 122096645
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/36:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:08:28:60:38/00:00:3a:00:00/40 tag 1 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/36:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:08:28:60:38/00:00:3a:00:00/40 tag 1 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Unhandled sense code
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
3a 38 60 2f
sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
sd 0:0:0:0: [sda] CDB: Read(10): 28 00 3a 38 60 28 00 00 08 00
end_request: I/O error, dev sda, sector 976773167
Buffer I/O error on device sda, logical block 122096645
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Unhandled sense code
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
3a 38 60 2f
sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
sd 0:0:0:0: [sda] CDB: Read(10): 28 00 3a 38 60 28 00 00 08 00
end_request: I/O error, dev sda, sector 976773167
Buffer I/O error on device sda, logical block 122096645
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/36:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/36:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Unhandled sense code
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
3a 38 60 2f
sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
sd 0:0:0:0: [sda] CDB: Read(10): 28 00 3a 38 60 28 00 00 08 00
end_request: I/O error, dev sda, sector 976773167
Buffer I/O error on device sda, logical block 122096645
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Unhandled sense code
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
3a 38 60 2f
sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
sd 0:0:0:0: [sda] CDB: Read(10): 28 00 3a 38 60 28 00 00 08 00
end_request: I/O error, dev sda, sector 976773167
Buffer I/O error on device sda, logical block 122096645
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/36:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Unhandled sense code
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
3a 38 60 2f
sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
sd 0:0:0:0: [sda] CDB: Read(10): 28 00 3a 38 60 28 00 00 08 00
end_request: I/O error, dev sda, sector 976773167
Buffer I/O error on device sda, logical block 122096645
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/36:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Unhandled sense code
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
3a 38 60 2f
sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
sd 0:0:0:0: [sda] CDB: Read(10): 28 00 3a 38 60 28 00 00 08 00
end_request: I/O error, dev sda, sector 976773167
Buffer I/O error on device sda, logical block 122096645
ata1: EH complete
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
r8169: eth0: link up
r8169: eth0: link up
ADDRCONF(NETDEV_UP): wlan0: link is not ready
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
[drm] nouveau 0000:02:00.0: Allocating FIFO number 2
[drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 2
eth0: no IPv6 routers present
fuse init (API version 7.13)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
udev: starting version 153

il me semble que c'est ce que j'ai lors du demarrage. après avoir appuyé sur echapp

impaire

Stop :lol:

Ca suffisait:

sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
sd 0:0:0:0: [sda] CDB: Read(10): 28 00 3a 38 60 28 00 00 08 00
end_request: I/O error, dev sda, sector 976773167
Buffer I/O error on device sda, logical block 122096645
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/08:00:28:60:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
res 41/40:08:2f:60:38/2b:00:3a:00:00/00 Emask 0x409 (media error) <F>
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC }
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: failed command: READ FPDMA QUEUED

sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
3a 38 60 2f

benja85

ok j'en jette plus 8-)

impaire

Chez moi, lorsque j'insistais, j'avais ce qui suit dans mes logs. Mais j'avais aussi vu la même chose que vous: READ FPDMA QUEUED.

Ouvrez le fichier /var/log/message (mais ne nous collez surtout pas tout, juste une erreur ou deux).

kernel: end_request: I/O error, dev sdb, sector 578633618
kernel: sd 7:0:0:0: [sdb] Unhandled sense code
kernel: sd 7:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
kernel: sd 7:0:0:0: [sdb] Sense Key : Hardware Error [current]
kernel: sd 7:0:0:0: [sdb] Add. Sense: No additional sense information
kernel: sd 7:0:0:0: [sdb] CDB: Read(10): 28 00 22 7d 40 12 00 00 01 00
kernel: end_request: I/O error, dev sdb, sector 578633746
kernel: sd 7:0:0:0: [sdb] Unhandled sense code
kernel: sd 7:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
kernel: sd 7:0:0:0: [sdb] Sense Key : Hardware Error [current]

benja85

var/log/message
-bash: /var/log/message: Aucun fichier ou dossier de ce type

impaire

ajoutez un S: /var/log/messages

benja85

suis en root,
/var/log/messages
-bash: /var/log/messages: Permission non accordée

impaire

benja85 wrote:suis en root,
/var/log/messages
-bash: /var/log/messages: Permission non accordée

Non, vous n'êtes pas en root. Ou c'est en panne.

J'ai raccordé mon propre disque, celui qui était "cassé", un peu comme le votre. Pour le moment, ça se passe bien, il n'y a pas d'erreurs suite à pareil formattage. D'ici à cemain, un petit script devrait avoir écrit puis relu 200Go sur ce disque.

209715200 bytes (210 MB) copied, 7.99237 s, 26.2 MB/s
75 done.
Writing 76...
200+0 records in
200+0 records out
209715200 bytes (210 MB) copied, 7.06071 s, 29.7 MB/s
76 done.
Writing 77...

benja85

je fais
su -
mot de passe....

madko

personnellement avec ce genre d'erreur je me casse pas la tête => envoi en garantie

Ya encore le G-sense qui a grimpé, il fait pas des bruits bizare le DD? genre des clacs?

benja85

non non pas un bruit,
en plus hors le demarrage de Fedora tout se passe très bien.
mais quoi leur dire pour la garantie

madko

La dernière fois que j'ai renvoyé un disque je suis passé par le site du fabricant du disque pour faire un RMA (je sais plus ce que ça veut dire). J'ai juste rentré le numéro de série, pour vérifier qu'il était sous garantie puis je l'ai envoyé à l'adresse indiquée. Aucun motif n'était demandé. Mais là c'est un portable? Le mieux serait de contacter le support, en disant que le disque dur est très lent, que ça plante souvent, et qu'il ya des erreurs SMART. En espérant qu'ils soient assez pro pour pas dire que ça vient de linux...

« Page précédente Page suivante »