j'étais en train de faire des modifs...
smartctl 5.39.1 2010-01-28 r3054 [x86_64-redhat-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen,
http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.6 series
Device Model: ST9500325AS
Serial Number: 6VE5GGT4
Firmware Version: 0002SDM1
User Capacity: 500 107 862 016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Fri Aug 27 00:16:37 2010 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 138) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 087 081 006 Pre-fail Always - 189962760
3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 088 088 020 Old_age Always - 12620
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 18033702
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 826
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 837
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 13802
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 79
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 067 050 045 Old_age Always - 33 (Lifetime Min/Max 24/37)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 23
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 0
193 Load_Cycle_Count 0x0032 086 086 000 Old_age Always - 29899
194 Temperature_Celsius 0x0022 033 050 000 Old_age Always - 33 (0 14 0 0)
195 Hardware_ECC_Recovered 0x001a 046 036 000 Old_age Always - 189962760
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 1
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 13330 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 13330 occurred at disk power-on lifetime: 825 hours (34 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 02:34:09.405 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 02:34:09.405 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 02:34:09.403 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 02:34:09.403 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 02:34:09.402 READ NATIVE MAX ADDRESS EXT
Error 13329 occurred at disk power-on lifetime: 825 hours (34 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 02:34:07.030 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 02:34:07.029 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 02:34:07.027 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 02:34:07.027 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 02:34:07.026 READ NATIVE MAX ADDRESS EXT
Error 13328 occurred at disk power-on lifetime: 825 hours (34 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 02:34:04.695 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 02:34:04.694 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 02:34:04.693 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 02:34:04.692 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 02:34:04.692 READ NATIVE MAX ADDRESS EXT
Error 13327 occurred at disk power-on lifetime: 825 hours (34 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 02:34:02.308 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 02:34:02.308 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 02:34:02.306 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 02:34:02.306 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 02:34:02.305 READ NATIVE MAX ADDRESS EXT
Error 13326 occurred at disk power-on lifetime: 825 hours (34 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 02:33:59.996 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 02:33:59.995 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 02:33:59.993 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 02:33:59.993 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 02:33:59.992 READ NATIVE MAX ADDRESS EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 825 976773167
# 2 Short offline Completed: read failure 90% 825 976773167
# 3 Short offline Completed: read failure 90% 825 976773167
# 4 Short offline Completed: read failure 90% 824 976773167
# 5 Extended offline Completed: read failure 90% 760 976773167
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
