- Modifié
$ sudo dnf upgrade -y --refresh
$ sudo dnf install hwinfo
$ hwinfo --netcard
$ sudo dnf upgrade -y --refresh
$ sudo dnf install hwinfo
$ hwinfo --netcard
hwinfo --netcard
11: PCI 200.0: 0200 Ethernet controller
[Created at pci.386]
Unique ID: c3qJ.Zt0NPZgx655
Parent ID: HnsE.jcgJs3uLnv5
SysFS ID: /devices/pci0000:00/0000:00:1c.5/0000:02:00.0
SysFS BusID: 0000:02:00.0
Hardware Class: network
Model: "Qualcomm Atheros Attansic L1 Gigabit Ethernet"
Vendor: pci 0x1969 "Qualcomm Atheros"
Device: pci 0x1048 "Attansic L1 Gigabit Ethernet"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x8226 "P5B-MX/WiFi-AP, P5KPL-VM Motherboard"
Revision: 0xb0
Driver: "atl1"
Driver Modules: "atl1"
Device File: enp2s0
Memory Range: 0xfe9c0000-0xfe9fffff (rw,non-prefetchable)
Memory Range: 0xfe9a0000-0xfe9bffff (ro,non-prefetchable,disabled)
IRQ: 26 (2608 events)
HW Address: 00:1e:8c:54:7f:09
Permanent HW Address: 00:1e:8c:54:7f:09
Link detected: yes
Module Alias: "pci:v00001969d00001048sv00001043sd00008226bc02sc00i00"
Driver Info #0:
Driver Status: atl1 is active
Driver Activation Cmd: "modprobe atl1"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #14 (PCI bridge)
37: USB 00.0: 0282 WLAN controller
[Created at usb.122]
Unique ID: 2UT6.pN+A6IzbQa4
Parent ID: k4bc.cO89g+iefn1
SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0
SysFS BusID: 1-3:1.0
Hardware Class: network
Model: "Ralink MT7601U Wireless Adapter"
Hotplug: USB
Vendor: usb 0x148f "Ralink Technology, Corp."
Device: usb 0x7601 "MT7601U Wireless Adapter"
Serial ID: "1.0"
Driver: "mt7601u"
Driver Modules: "mt7601u"
Device File: wlp0s26f7u3
Features: WLAN
Speed: 480 Mbps
HW Address: 20:0d:b0:2e:2a:16
Permanent HW Address: 20:0d:b0:2e:2a:16
Link detected: yes
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "usb:v148Fp7601d0000dc00dsc00dp00icFFiscFFipFFin00"
Driver Info #0:
Driver Status: mt7601u is active
Driver Activation Cmd: "modprobe mt7601u"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #43 (Hub)
$ sudo ifup wlp0s26f7u3
Ton dongle wifi est branché comment ??
Ensuite tu peux t'inspirer de :Attached to: #43 (Hub)
sudo ifup wlp0s26f7u3
No suitable profile "wlp0s26f7u3" found!
See all profiles with `nmcli connection`.
Reload files from disk with `nmcli connection reload`
Activate the desired profile with `nmcli connection up \"$NAME\"`
sudo nmcli connection
NAME UUID TYPE DEVICE
Connexion filaire 1 78e33d31-dfae-3f24-b0fa-ed5410b34800 ethernet enp2s0
Bbox-1539F0A6 b0b53390-6127-4345-b504-38f64143c9aa wifi wlp0s26f7u3
Ton dongle est reconnu et actif
sur ton écran graphique, tu peux te connecter sur ta Bbox et rajouter ton mdp
Voici une succession de commandes. la succession dhclient puis ifup est devenue requise pour avoir une connexion ethernet active. J’essaie de comprendre.
sudo nmcli connection
NAME UUID TYPE DEVICE
Bbox-1539F0A6 b0b53390-6127-4345-b504-38f64143c9aa wifi --
sudo dhclient enp2s0
grep: /etc/sysconfig/network-scripts/ifcfg-*: No such file or directory
grep: /etc/sysconfig/network-scripts/ifcfg-*: No such file or directory
grep: /etc/sysconfig/network-scripts/ifcfg-*: No such file or directory
grep: /etc/sysconfig/network-scripts/ifcfg-*: No such file or directory
grep: /etc/sysconfig/network-scripts/ifcfg-*: No such file or directory
grep: /etc/sysconfig/network-scripts/ifcfg-*: No such file or directory
/usr/sbin/dhclient-script: line 706: /etc/resolv.conf: Permission denied
sudo ifup enp2s0
Connexion activée (chemin D-Bus actif : /org/freedesktop/NetworkManager/ActiveConnection/2)
sudo nmcli connection
NAME UUID TYPE DEVICE
enp2s0 12c09477-0dd9-46bd-b752-34bade9e008d ethernet enp2s0
Bbox-1539F0A6 b0b53390-6127-4345-b504-38f64143c9aa wifi --
Ton port ethernet ne semble pas reconnu automatiquement par NM.
Je viens de refusionner les topics.
J’ai refait la totale:
rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
lsusb
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 002 Device 002: ID 1a2c:2c27 China Resource Semico Co., Ltd USB Keyboard
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IB (ICH9) 2 port SATA Controller [IDE mode] (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] (rev 02)
01:00.0 VGA compatible controller: NVIDIA Corporation GK208B [GeForce GT 710] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GK208 HDMI/DP Audio Controller (rev a1)
02:00.0 Ethernet controller: Qualcomm Atheros Attansic L1 Gigabit Ethernet (rev b0)
03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03)
03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03)
05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
sudo nmcli connection
NAME UUID TYPE DEVICE
Bbox-1539F0A6 b0b53390-6127-4345-b504-38f64143c9aa wifi --
C’est avant que je ne fasse mon : dhclient enp2s0 puis ifup enp2s0 qui active à chaque fois.
Si c’est Ok, n’oublies de mettre en résolu
Ben, je peux fonctionner mais le mystère demeure 🇦 Pourquoi cette succession dhclient puis ifup pour activer ethernet ce qui n’était pas le cas précédemment. Je remets la succession.
sudo nmcli connection
[sudo] Mot de passe de reidid :
NAME UUID TYPE DEVICE
Bbox-1539F0A6 b0b53390-6127-4345-b504-38f64143c9aa wifi --
commentaire : ethernet absent juste après le démarrage, ce qui n'était pas le cas il y a 48 heures...)
sudo dhclient enp2s0
grep: /etc/sysconfig/network-scripts/ifcfg-*: No such file or directory
grep: /etc/sysconfig/network-scripts/ifcfg-*: No such file or directory
grep: /etc/sysconfig/network-scripts/ifcfg-*: No such file or directory
grep: /etc/sysconfig/network-scripts/ifcfg-*: No such file or directory
grep: /etc/sysconfig/network-scripts/ifcfg-*: No such file or directory
grep: /etc/sysconfig/network-scripts/ifcfg-*: No such file or directory
/usr/sbin/dhclient-script: line 706: /etc/resolv.conf: Permission denied
commentaire : si direct ifup pas de connexion. L'étape ci-dessus quoique non productive est requise pour que ifup fonctionne et rende la connexion fonctionnelle.
sudo ifup enp2s0
Connexion activée (chemin D-Bus actif : /org/freedesktop/NetworkManager/ActiveConnection/2)
Je veux bien fermer le fil mais je reste sans explication…
Pour faire simple, au reboot as tu une connection réseau sans faire de manip quelconque ?
Ton display manager
Gnome
KDE
Mate
Cinnamon etc …
Powermanegement
$ sudo iwconfig
Oublies iwconfig
les outils
Le paquet wireless-tools qui fournissait les utilitaires en espace utilisateur est de fait supprimé
https://forums.fedora-fr.org/d/73354-fedora-linux-36-est-disponible-
2 idées sur le powermagement
https://discussion.fedoraproject.org/t/tip-lower-wifi-latency-by-disabling-wifi-power-management/74534