Fedora-Fr - Communauté francophone Fedora - Linux

Communauté francophone des utilisateurs de la distribution Linux Fedora.

  

Dernière news : Fedora 30 est mort ce soir

#1 10/11/2013 19:41:29

PapsOu
Developpeur PHP7 Symfony3
Rédacteur Wiki
Lieu : Quimper
Inscription : 27/11/2009
Messages : 1 849
Site Web

[Résolu] Démarrage lent SSD + HDD

Bonjour à tous le monde.

Je viens de mettre en place un SDD Samsung 840 PRO 128 GB avec un HDD 500 Go de chez WeternDigital.

J'ai partitionné fedora 19 x86_64 (gnome) de cette manière :

SSD :
  - /boot : 2.1 GB Ext4
  - / : 122GB Ext4
  - swap : swap

HDD :
  - /home: 500 GB Ext4

Tous fonctionne plutôt bien, mis à part le démarrage qui n'est pas aussi rapide que sur mon vieux ThinkPad T60 (équipé d'un SDD de chez SanDisk en 64GB.)

Je ne sais pas vraiment comment expliquer cette « lenteur » (entre guillements car 25 s c'est pas non plus trop lent, même si pour un SDD ça ne le fait pas)

$ systemd-analyze blame
$ systemd-analyze blame
         24.241s udisks2.service
          1.228s systemd-udev-settle.service
           761ms plymouth-start.service
           419ms firewalld.service
           273ms systemd-tmpfiles-setup.service
           250ms plymouth-read-write.service
           178ms accounts-daemon.service
           168ms avahi-daemon.service
           154ms systemd-logind.service
           142ms gdm.service
           134ms lvm2-monitor.service
           122ms systemd-fsck-root.service
           120ms systemd-fsck@dev-disk-by\x2duuid-56b9dc79\x2d69e9\x2d485a\x2db509\x2d0312695582c9.service
            91ms dmraid-activation.service
            68ms rc-local.service
            56ms NetworkManager.service
            41ms mcelog.service
            39ms systemd-udev-trigger.service
            39ms systemd-fsck@dev-disk-by\x2duuid-5767bcc7\x2d9ccc\x2d4eb1\x2da311\x2df6b5864559ed.service
            38ms livesys.service
            37ms colord.service
            37ms home.mount
            28ms polkit.service
            27ms chronyd.service
            26ms fedora-loadmodules.service
            25ms systemd-tmpfiles-setup-dev.service
            24ms rtkit-daemon.service
            22ms abrt-ccpp.service
            19ms livesys-late.service
            17ms upower.service
            16ms systemd-tmpfiles-clean.service
            13ms systemd-udevd.service
            13ms fedora-readonly.service
            12ms systemd-readahead-collect.service
            12ms systemd-readahead-replay.service
            12ms auditd.service
            12ms boot.mount
            11ms systemd-journal-flush.service
            11ms dev-hugepages.mount
            10ms dev-mqueue.mount
            10ms systemd-remount-fs.service
            10ms lvm2-lvmetad.service
             9ms dev-disk-by\x2duuid-e940d1de\x2d5fc8\x2d4a67\x2d89cd\x2d5cc3753ba63f.swap
             9ms sys-kernel-debug.mount
             8ms systemd-vconsole-setup.service
             8ms systemd-sysctl.service
             8ms systemd-readahead-done.service
             7ms rpcbind.service
             5ms systemd-user-sessions.service
             5ms sys-fs-fuse-connections.mount
             3ms systemd-update-utmp-runlevel.service
             2ms tmp.mount
             1ms plymouth-quit-wait.service
             1ms sys-kernel-config.mount
             1ms systemd-random-seed-load.service

Le service udisks2.service semble pateauger un peu vu son temp anormalement élevé (vu 75ms en moyenne sur d'autres config).

# cat /var/log/boot.log 
[  OK  ] Found device Samsung_SSD_840_PRO_Series.
[  OK  ] Found device Samsung_SSD_840_PRO_Series.
[  OK  ] Found device Samsung_SSD_840_PRO_Series.
[  OK  ] Started Show Plymouth Boot Screen.
[  OK  ] Reached target Paths.
[  OK  ] Reached target Basic System.
[  OK  ] Started dracut initqueue hook.
         Mounting /sysroot...
[  OK  ] Mounted /sysroot.
[  OK  ] Reached target Initrd Root File System.
         Starting Reload Configuration from the Real Root...
[  OK  ] Started Reload Configuration from the Real Root.
[  OK  ] Reached target Initrd File Systems.
[  OK  ] Reached target Initrd Default Target.

Welcome to Fedora 19 (Schrödinger’s Cat)!

[  OK  ] Stopped Switch Root.
[  OK  ] Stopped target Switch Root.
[  OK  ] Stopped target Initrd File Systems.
[  OK  ] Stopped target Initrd Root File System.
         Starting Collect Read-Ahead Data...
         Starting Replay Read-Ahead Data...
[  OK  ] Reached target Login Prompts.
[  OK  ] Listening on Syslog Socket.
[  OK  ] Reached target Remote File Systems.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on Delayed Shutdown Socket.
         Mounting Huge Pages File System...
         Mounting POSIX Message Queue File System...
[  OK  ] Set up automount Arbitrary Executable File Formats File System Automount Point.
         Starting Create static device nodes in /dev...
         Mounting Debug File System...
[  OK  ] Listening on LVM2 metadata daemon socket.
[  OK  ] Listening on Device-mapper event daemon FIFOs.
         Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Listening on udev Control Socket.
         Starting udev Coldplug all Devices...
         Expecting device dev-disk-by\x2duuid-e940d1de\x2d5fc8\x2d4a67\x2d89cd\x2d5cc3753ba63f.device...
         Mounting Temporary Directory...
         Expecting device dev-disk-by\x2duuid-5767bcc7\x2d9ccc\x2d4eb1\x2da311\x2df6b5864559ed.device...
         Expecting device dev-disk-by\x2duuid-56b9dc79\x2d69e9\x2d485a\x2db509\x2d0312695582c9.device...
[  OK  ] Started Collect Read-Ahead Data.
[  OK  ] Started Replay Read-Ahead Data.
[  OK  ] Mounted Huge Pages File System.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted Debug File System.
[  OK  ] Mounted Temporary Directory.
         Starting Load legacy module configuration...
         Starting File System Check on Root Device...
         Starting Apply Kernel Variables...
         Mounting Configuration File System...
[  OK  ] Stopped Trigger Flushing of Journal to Persistent Storage.
         Stopping Journal Service...
[  OK  ] Stopped Journal Service.
         Starting Journal Service...
[  OK  ] Started Journal Service.
[  OK  ] Mounted Configuration File System.
         Starting LVM2 metadata daemon...
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Create static device nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  ] Started LVM2 metadata daemon.
[  OK  ] Started Load legacy module configuration.
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Started udev Coldplug all Devices.
         Starting udev Wait for Complete Device Initialization...
systemd-fsck[192]: SSD-root : propre, 107819/7430144 fichiers, 1435612/29696000 blocs
[  OK  ] Started File System Check on Root Device.
         Starting Remount Root and Kernel File Systems...
[  OK  ] Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[  OK  ] Started Remount Root and Kernel File Systems.
[  OK  ] Reached target Local File Systems (Pre).
         Starting Configure read-only root support...
[  OK  ] Started Configure read-only root support.
         Starting Load Random Seed...
[  OK  ] Started Load Random Seed.
[  OK  ] Found device WDC_WD5000AAKX-001CA0.
         Starting File System Check on /dev/disk/by-uuid/56b9dc79-69e9-485a-b509-0312695582c9...
[  OK  ] Found device Samsung_SSD_840_PRO_Series.
         Activating swap /dev/disk/by-uuid/e940d1de-5fc8-4a67-89cd-5cc3753ba63f...
[  OK  ] Found device Samsung_SSD_840_PRO_Series.
         Starting File System Check on /dev/disk/by-uuid/5767bcc7-9ccc-4eb1-a311-f6b5864559ed...
[  OK  ] Reached target Sound Card.
[  OK  ] Activated swap /dev/disk/by-uuid/e940d1de-5fc8-4a67-89cd-5cc3753ba63f.
[  OK  ] Reached target Swap.
systemd-fsck[251]: HDD-home : propre, 252/30531584 fichiers, 1975411/122096384 blocs
systemd-fsck[264]: SSB-boot : propre, 336/128000 fichiers, 41862/512000 blocs
[  OK  ] Started File System Check on /dev/disk/by-uuid/5767bcc7-9ccc-4eb1-a311-f6b5864559ed.
         Mounting /boot...
[  OK  ] Mounted /boot.
[  OK  ] Started File System Check on /dev/disk/by-uuid/56b9dc79-69e9-485a-b509-0312695582c9.
         Mounting /home...
[  OK  ] Mounted /home.
[  OK  ] Started udev Wait for Complete Device Initialization.
         Starting Activation of DM RAID sets...
[  OK  ] Started Activation of DM RAID sets.
[  OK  ] Reached target Local File Systems.
         Starting Recreate Volatile Files and Directories...
         Starting Security Auditing Service...
         Starting Trigger Flushing of Journal to Persistent Storage...
         Starting Tell Plymouth To Write Out Runtime Data...
[  OK  ] Reached target Encrypted Volumes.
[  OK  ] Started Security Auditing Service.
[  OK  ] Started Trigger Flushing of Journal to Persistent Storage.
[  OK  ] Started Tell Plymouth To Write Out Runtime Data.
[  OK  ] Started Recreate Volatile Files and Directories.
[  OK  ] Reached target System Initialization.
[  OK  ] Reached target Timers.
         Starting Manage Sound Card State (restore and store)...
[  OK  ] Started Manage Sound Card State (restore and store).
[  OK  ] Reached target Paths.
[  OK  ] Listening on Open-iSCSI iscsiuio Socket.
[  OK  ] Listening on CUPS Printing Service Sockets.
[  OK  ] Listening on Open-iSCSI iscsid Socket.
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[  OK  ] Listening on RPCbind Server Activation Socket.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
         Starting LSB: Init script for live image....
         Starting firewalld - dynamic firewall daemon...
         Starting NTP client/server...
         Starting Hardware RNG Entropy Gatherer Daemon...
[  OK  ] Started Hardware RNG Entropy Gatherer Daemon.
         Starting Machine Check Exception Logging Daemon...
         Starting irqbalance daemon...
[  OK  ] Started irqbalance daemon.
         Starting Login Service...
         Starting RealtimeKit Scheduling Policy Service...
         Starting Avahi mDNS/DNS-SD Stack...
         Starting Permit User Sessions...
         Starting System Logging Service...
[  OK  ] Started System Logging Service.
         Starting D-Bus System Message Bus...
[  OK  ] Started D-Bus System Message Bus.
         Starting Accounts Service...
[  OK  ] Started Permit User Sessions.
         Starting Job spooling tools...
[  OK  ] Started Job spooling tools.
         Starting Command Scheduler...
[  OK  ] Started Command Scheduler.
[  OK  ] Started NTP client/server.
[  OK  ] Started RealtimeKit Scheduling Policy Service.
[  OK  ] Started LSB: Init script for live image..
         Starting SYSV: Late init script for live image....
         Starting GNOME Display Manager...
         Starting ABRT Automated Bug Reporting Tool...
[  OK  ] Started ABRT Automated Bug Reporting Tool.
         Starting Install ABRT coredump hook...
         Starting ABRT Xorg log watcher...
[  OK  ] Started ABRT Xorg log watcher.
         Starting ABRT kernel log watcher...
[  OK  ] Started ABRT kernel log watcher.
[  OK  ] Started Machine Check Exception Logging Daemon.
[  OK  ] Started SYSV: Late init script for live image..
[  OK  ] Started Install ABRT coredump hook.
         Starting Authorization Manager...
[  OK  ] Started Login Service.
[  OK  ] Started Avahi mDNS/DNS-SD Stack.
[  OK  ] Started GNOME Display Manager.
[  OK  ] Started Authorization Manager.
[  OK  ] Started Accounts Service.

et message :

# cat /var/log/message
Nov 10 18:05:57 Salon systemd-fsck[192]: SSD-root : propre, 107819/7430144 fichiers, 1435612/29696000 blocs
Nov 10 18:05:57 Salon kernel: [    0.000000] Initializing cgroup subsys cpuset
Nov 10 18:05:57 Salon kernel: [    0.000000] Initializing cgroup subsys cpu
Nov 10 18:05:57 Salon kernel: [    0.000000] Initializing cgroup subsys cpuacct
Nov 10 18:05:57 Salon kernel: [    0.000000] Linux version 3.11.7-200.fc19.x86_64 (mockbuild@bkernel02) (gcc version 4.8.2 20131017 (Red Hat 4.8.2-1) (GCC) ) #1 SMP Mon Nov 4 14:09:03 UTC 2013
Nov 10 18:05:57 Salon kernel: [    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.11.7-200.fc19.x86_64 root=UUID=e4615b80-dd1c-4dc3-86b8-4db9060113e4 ro rd.md=0 rd.lvm=0 rd.dm=0 vconsole.keymap=fr rd.luks=0 vconsole.font=latarcyrheb-sun16 rhgb quiet LANG=fr_FR.UTF-8
Nov 10 18:05:57 Salon kernel: [    0.000000] e820: BIOS-provided physical RAM map:
Nov 10 18:05:57 Salon kernel: [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
Nov 10 18:05:57 Salon kernel: [    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
Nov 10 18:05:57 Salon kernel: [    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
Nov 10 18:05:57 Salon kernel: [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfe8ffff] usable
Nov 10 18:05:57 Salon kernel: [    0.000000] BIOS-e820: [mem 0x00000000cfe90000-0x00000000cfea7fff] ACPI data
Nov 10 18:05:57 Salon kernel: [    0.000000] BIOS-e820: [mem 0x00000000cfea8000-0x00000000cfecffff] ACPI NVS
Nov 10 18:05:57 Salon kernel: [    0.000000] BIOS-e820: [mem 0x00000000cfed0000-0x00000000cfefffff] reserved
Nov 10 18:05:57 Salon kernel: [    0.000000] BIOS-e820: [mem 0x00000000ff700000-0x00000000ffffffff] reserved
Nov 10 18:05:57 Salon kernel: [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
Nov 10 18:05:57 Salon kernel: [    0.000000] NX (Execute Disable) protection: active
Nov 10 18:05:57 Salon kernel: [    0.000000] SMBIOS 2.5 present.
Nov 10 18:05:57 Salon kernel: [    0.000000] No AGP bridge found
Nov 10 18:05:57 Salon kernel: [    0.000000] e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000
Nov 10 18:05:57 Salon kernel: [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Nov 10 18:05:57 Salon kernel: [    0.000000] e820: last_pfn = 0xcfe90 max_arch_pfn = 0x400000000
Nov 10 18:05:57 Salon kernel: [    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Nov 10 18:05:57 Salon kernel: [    0.000000] Using GB pages for direct mapping
Nov 10 18:05:57 Salon kernel: [    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
Nov 10 18:05:57 Salon kernel: [    0.000000] init_memory_mapping: [mem 0x22fe00000-0x22fffffff]
Nov 10 18:05:57 Salon kernel: [    0.000000] init_memory_mapping: [mem 0x22c000000-0x22fdfffff]
Nov 10 18:05:57 Salon kernel: [    0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
Nov 10 18:05:57 Salon kernel: [    0.000000] init_memory_mapping: [mem 0x00100000-0xcfe8ffff]
Nov 10 18:05:57 Salon kernel: [    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
Nov 10 18:05:57 Salon kernel: [    0.000000] RAMDISK: [mem 0x36dba000-0x376d4fff]
Nov 10 18:05:57 Salon kernel: [    0.000000] ACPI: RSDP 00000000000fb730 00024 (v02 ACPIAM)
Nov 10 18:05:57 Salon kernel: [    0.000000] ACPI: XSDT 00000000cfe90100 0005C (v01 112910 XSDT1627 20101129 MSFT 00000097)
Nov 10 18:05:57 Salon kernel: [    0.000000] ACPI: FACP 00000000cfe90290 000F4 (v03 112910 FACP1627 20101129 MSFT 00000097)
Nov 10 18:05:57 Salon kernel: [    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130517/tbfadt-603)
Nov 10 18:05:57 Salon kernel: [    0.000000] ACPI: DSDT 00000000cfe90450 0D820 (v01  A1655 A1655001 00000001 INTL 20060113)
Nov 10 18:05:57 Salon kernel: [    0.000000] ACPI: FACS 00000000cfea8000 00040
Nov 10 18:05:57 Salon kernel: [    0.000000] ACPI: APIC 00000000cfe90390 0007C (v01 112910 APIC1627 20101129 MSFT 00000097)
Nov 10 18:05:57 Salon kernel: [    0.000000] ACPI: MCFG 00000000cfe90410 0003C (v01 112910 OEMMCFG  20101129 MSFT 00000097)
Nov 10 18:05:57 Salon kernel: [    0.000000] ACPI: OEMB 00000000cfea8040 00072 (v01 112910 OEMB1627 20101129 MSFT 00000097)
Nov 10 18:05:57 Salon kernel: [    0.000000] ACPI: SRAT 00000000cfe9f650 000E8 (v01 AMD    FAM_F_10 00000002 AMD  00000001)
Nov 10 18:05:57 Salon kernel: [    0.000000] ACPI: HPET 00000000cfe9f740 00038 (v01 112910 OEMHPET  20101129 MSFT 00000097)
Nov 10 18:05:57 Salon kernel: [    0.000000] ACPI: SSDT 00000000cfe9f780 0088C (v01 A M I  POWERNOW 00000001 AMD  00000001)
Nov 10 18:05:57 Salon kernel: [    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
Nov 10 18:05:57 Salon kernel: [    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
Nov 10 18:05:57 Salon kernel: [    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
Nov 10 18:05:57 Salon kernel: [    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
Nov 10 18:05:57 Salon kernel: [    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
Nov 10 18:05:57 Salon kernel: [    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xcfffffff]
Nov 10 18:05:57 Salon kernel: [    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x22fffffff]
Nov 10 18:05:57 Salon kernel: [    0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xcfffffff] -> [mem 0x00000000-0xcfffffff]
Nov 10 18:05:57 Salon kernel: [    0.000000] NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x22fffffff] -> [mem 0x00000000-0x22fffffff]
Nov 10 18:05:57 Salon kernel: [    0.000000] Initmem setup node 0 [mem 0x00000000-0x22fffffff]
Nov 10 18:05:57 Salon kernel: [    0.000000]   NODE_DATA [mem 0x22ffea000-0x22fffdfff]
Nov 10 18:05:57 Salon kernel: [    0.000000] Zone ranges:
Nov 10 18:05:57 Salon kernel: [    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
Nov 10 18:05:57 Salon kernel: [    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
Nov 10 18:05:57 Salon kernel: [    0.000000]   Normal   [mem 0x100000000-0x22fffffff]
Nov 10 18:05:57 Salon kernel: [    0.000000] Movable zone start for each node
Nov 10 18:05:57 Salon kernel: [    0.000000] Early memory node ranges
Nov 10 18:05:57 Salon kernel: [    0.000000]   node   0: [mem 0x00001000-0x0009dfff]
Nov 10 18:05:57 Salon kernel: [    0.000000]   node   0: [mem 0x00100000-0xcfe8ffff]
Nov 10 18:05:57 Salon kernel: [    0.000000]   node   0: [mem 0x100000000-0x22fffffff]
Nov 10 18:05:57 Salon kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x808
Nov 10 18:05:57 Salon kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Nov 10 18:05:57 Salon kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Nov 10 18:05:57 Salon kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Nov 10 18:05:57 Salon kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Nov 10 18:05:57 Salon kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
Nov 10 18:05:57 Salon kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
Nov 10 18:05:57 Salon kernel: [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
Nov 10 18:05:57 Salon kernel: [    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
Nov 10 18:05:57 Salon kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov 10 18:05:57 Salon kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Nov 10 18:05:57 Salon kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Nov 10 18:05:57 Salon kernel: [    0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
Nov 10 18:05:57 Salon kernel: [    0.000000] smpboot: Allowing 6 CPUs, 2 hotplug CPUs
Nov 10 18:05:57 Salon kernel: [    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
Nov 10 18:05:57 Salon kernel: [    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
Nov 10 18:05:57 Salon kernel: [    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
Nov 10 18:05:57 Salon kernel: [    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
Nov 10 18:05:57 Salon kernel: [    0.000000] PM: Registered nosave memory: [mem 0xcfe90000-0xcfea7fff]
Nov 10 18:05:57 Salon kernel: [    0.000000] PM: Registered nosave memory: [mem 0xcfea8000-0xcfecffff]
Nov 10 18:05:57 Salon kernel: [    0.000000] PM: Registered nosave memory: [mem 0xcfed0000-0xcfefffff]
Nov 10 18:05:57 Salon kernel: [    0.000000] PM: Registered nosave memory: [mem 0xcff00000-0xff6fffff]
Nov 10 18:05:57 Salon kernel: [    0.000000] PM: Registered nosave memory: [mem 0xff700000-0xffffffff]
Nov 10 18:05:57 Salon kernel: [    0.000000] e820: [mem 0xcff00000-0xff6fffff] available for PCI devices
Nov 10 18:05:57 Salon kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Nov 10 18:05:57 Salon kernel: [    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:6 nr_node_ids:1
Nov 10 18:05:57 Salon kernel: [    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s85568 r8192 d20928 u262144
Nov 10 18:05:57 Salon kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2063901
Nov 10 18:05:57 Salon kernel: [    0.000000] Policy zone: Normal
Nov 10 18:05:57 Salon kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11.7-200.fc19.x86_64 root=UUID=e4615b80-dd1c-4dc3-86b8-4db9060113e4 ro rd.md=0 rd.lvm=0 rd.dm=0 vconsole.keymap=fr rd.luks=0 vconsole.font=latarcyrheb-sun16 rhgb quiet LANG=fr_FR.UTF-8
Nov 10 18:05:57 Salon kernel: [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
Nov 10 18:05:57 Salon kernel: [    0.000000] Checking aperture...
Nov 10 18:05:57 Salon kernel: [    0.000000] No AGP bridge found
Nov 10 18:05:57 Salon kernel: [    0.000000] Node 0: aperture @ be00000000 size 32 MB
Nov 10 18:05:57 Salon kernel: [    0.000000] Aperture beyond 4GB. Ignoring.
Nov 10 18:05:57 Salon kernel: [    0.000000] Your BIOS doesn't leave a aperture memory hole
Nov 10 18:05:57 Salon kernel: [    0.000000] Please enable the IOMMU option in the BIOS setup
Nov 10 18:05:57 Salon kernel: [    0.000000] This costs you 64 MB of RAM
Nov 10 18:05:57 Salon kernel: [    0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
Nov 10 18:05:57 Salon kernel: [    0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
Nov 10 18:05:57 Salon kernel: [    0.000000] Memory: 8097464K/8386740K available (6507K kernel code, 990K rwdata, 2868K rodata, 1420K init, 1540K bss, 289276K reserved)
Nov 10 18:05:57 Salon kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Nov 10 18:05:57 Salon kernel: [    0.000000] Hierarchical RCU implementation.
Nov 10 18:05:57 Salon kernel: [    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=6.
Nov 10 18:05:57 Salon kernel: [    0.000000] NR_IRQS:8448 nr_irqs:728 16
Nov 10 18:05:57 Salon kernel: [    0.000000] Console: colour VGA+ 80x25
Nov 10 18:05:57 Salon kernel: [    0.000000] console [tty0] enabled
Nov 10 18:05:57 Salon kernel: [    0.000000] allocated 33554432 bytes of page_cgroup
Nov 10 18:05:57 Salon kernel: [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Nov 10 18:05:57 Salon kernel: [    0.000000] tsc: Fast TSC calibration using PIT
Nov 10 18:05:57 Salon kernel: [    0.001000] tsc: Detected 3214.436 MHz processor
Nov 10 18:05:57 Salon kernel: [    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6428.87 BogoMIPS (lpj=3214436)
Nov 10 18:05:57 Salon kernel: [    0.000005] pid_max: default: 32768 minimum: 301
Nov 10 18:05:57 Salon kernel: [    0.000032] Security Framework initialized
Nov 10 18:05:57 Salon kernel: [    0.000038] SELinux:  Initializing.
Nov 10 18:05:57 Salon kernel: [    0.000578] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Nov 10 18:05:57 Salon kernel: [    0.002769] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Nov 10 18:05:57 Salon kernel: [    0.003722] Mount-cache hash table entries: 256
Nov 10 18:05:57 Salon kernel: [    0.003892] Initializing cgroup subsys memory
Nov 10 18:05:57 Salon kernel: [    0.003902] Initializing cgroup subsys devices
Nov 10 18:05:57 Salon kernel: [    0.003903] Initializing cgroup subsys freezer
Nov 10 18:05:57 Salon kernel: [    0.003904] Initializing cgroup subsys net_cls
Nov 10 18:05:57 Salon kernel: [    0.003906] Initializing cgroup subsys blkio
Nov 10 18:05:57 Salon kernel: [    0.003907] Initializing cgroup subsys perf_event
Nov 10 18:05:57 Salon kernel: [    0.003931] CPU: Physical Processor ID: 0
Nov 10 18:05:57 Salon kernel: [    0.003931] CPU: Processor Core ID: 0
Nov 10 18:05:57 Salon kernel: [    0.003933] mce: CPU supports 6 MCE banks
Nov 10 18:05:57 Salon kernel: [    0.003938] LVT offset 0 assigned for vector 0xf9
Nov 10 18:05:57 Salon kernel: [    0.003941] process: using AMD E400 aware idle routine
Nov 10 18:05:57 Salon kernel: [    0.003943] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Nov 10 18:05:57 Salon kernel: [    0.003943] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
Nov 10 18:05:57 Salon kernel: [    0.003943] tlb_flushall_shift: 4
Nov 10 18:05:57 Salon kernel: [    0.004011] Freeing SMP alternatives memory: 24K (ffffffff81e5c000 - ffffffff81e62000)
Nov 10 18:05:57 Salon kernel: [    0.004679] ACPI: Core revision 20130517
Nov 10 18:05:57 Salon kernel: [    0.007516] ACPI: All ACPI Tables successfully acquired
Nov 10 18:05:57 Salon kernel: [    0.014758] ftrace: allocating 25153 entries in 99 pages
Nov 10 18:05:57 Salon kernel: [    0.023880] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Nov 10 18:05:57 Salon kernel: [    0.033897] smpboot: CPU0: AMD Phenom(tm) II X4 955 Processor (fam: 10, model: 04, stepping: 03)
Nov 10 18:05:57 Salon kernel: [    0.135348] Performance Events: AMD PMU driver.
Nov 10 18:05:57 Salon kernel: [    0.135351] ... version:                0
Nov 10 18:05:57 Salon kernel: [    0.135352] ... bit width:              48
Nov 10 18:05:57 Salon kernel: [    0.135353] ... generic registers:      4
Nov 10 18:05:57 Salon kernel: [    0.135354] ... value mask:             0000ffffffffffff
Nov 10 18:05:57 Salon kernel: [    0.135355] ... max period:             00007fffffffffff
Nov 10 18:05:57 Salon kernel: [    0.135355] ... fixed-purpose events:   0
Nov 10 18:05:57 Salon kernel: [    0.135356] ... event mask:             000000000000000f
Nov 10 18:05:57 Salon kernel: [    0.136328] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Nov 10 18:05:57 Salon kernel: [    0.149577] process: System has AMD C1E enabled
Nov 10 18:05:57 Salon kernel: [    0.149589] process: Switch to broadcast mode on CPU1
Nov 10 18:05:57 Salon kernel: [    0.162787] process: Switch to broadcast mode on CPU2
Nov 10 18:05:57 Salon kernel: [    0.136392] smpboot: Booting Node   0, Processors  #1 #2 #3
Nov 10 18:05:57 Salon kernel: [    0.175943] Brought up 4 CPUs
Nov 10 18:05:57 Salon kernel: [    0.175945] smpboot: Total of 4 processors activated (25715.48 BogoMIPS)
Nov 10 18:05:57 Salon kernel: [    0.180183] process: Switch to broadcast mode on CPU3
Nov 10 18:05:57 Salon kernel: [    0.180267] process: Switch to broadcast mode on CPU0
Nov 10 18:05:57 Salon kernel: [    0.180437] devtmpfs: initialized
Nov 10 18:05:57 Salon kernel: [    0.180614] PM: Registering ACPI NVS region [mem 0xcfea8000-0xcfecffff] (163840 bytes)
Nov 10 18:05:57 Salon kernel: [    0.181395] atomic64 test passed for x86-64 platform with CX8 and with SSE
Nov 10 18:05:57 Salon kernel: [    0.181417] RTC time: 17:05:19, date: 11/10/13
Nov 10 18:05:57 Salon kernel: [    0.181457] NET: Registered protocol family 16
Nov 10 18:05:57 Salon kernel: [    0.181551] TOM: 00000000d0000000 aka 3328M
Nov 10 18:05:57 Salon kernel: [    0.181561] TOM2: 0000000230000000 aka 8960M
Nov 10 18:05:57 Salon kernel: [    0.181646] ACPI: bus type PCI registered
Nov 10 18:05:57 Salon kernel: [    0.181648] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Nov 10 18:05:57 Salon kernel: [    0.181689] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Nov 10 18:05:57 Salon kernel: [    0.181691] PCI: not using MMCONFIG
Nov 10 18:05:57 Salon kernel: [    0.181692] PCI: Using configuration type 1 for base access
Nov 10 18:05:57 Salon kernel: [    0.181693] PCI: Using configuration type 1 for extended access
Nov 10 18:05:57 Salon kernel: [    0.182442] bio: create slab <bio-0> at 0
Nov 10 18:05:57 Salon kernel: [    0.182541] ACPI: Added _OSI(Module Device)
Nov 10 18:05:57 Salon kernel: [    0.182542] ACPI: Added _OSI(Processor Device)
Nov 10 18:05:57 Salon kernel: [    0.182543] ACPI: Added _OSI(3.0 _SCP Extensions)
Nov 10 18:05:57 Salon kernel: [    0.182544] ACPI: Added _OSI(Processor Aggregator Device)
Nov 10 18:05:57 Salon kernel: [    0.184161] ACPI: Executed 3 blocks of module-level executable AML code
Nov 10 18:05:57 Salon kernel: [    0.200940] ACPI: Interpreter enabled
Nov 10 18:05:57 Salon kernel: [    0.200950] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
Nov 10 18:05:57 Salon kernel: [    0.200961] ACPI: (supports S0 S1 S3 S4 S5)
Nov 10 18:05:57 Salon kernel: [    0.200962] ACPI: Using IOAPIC for interrupt routing
Nov 10 18:05:57 Salon kernel: [    0.200977] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Nov 10 18:05:57 Salon kernel: [    0.201501] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
Nov 10 18:05:57 Salon kernel: [    0.208788] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Nov 10 18:05:57 Salon kernel: [    0.208841] ACPI: No dock devices found.
Nov 10 18:05:57 Salon kernel: [    0.263551] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Nov 10 18:05:57 Salon kernel: [    0.263556] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
Nov 10 18:05:57 Salon kernel: [    0.263557] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
Nov 10 18:05:57 Salon kernel: [    0.263719] PCI host bridge to bus 0000:00
Nov 10 18:05:57 Salon kernel: [    0.263722] pci_bus 0000:00: root bus resource [bus 00-ff]
Nov 10 18:05:57 Salon kernel: [    0.263723] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
Nov 10 18:05:57 Salon kernel: [    0.263725] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
Nov 10 18:05:57 Salon kernel: [    0.263726] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Nov 10 18:05:57 Salon kernel: [    0.263728] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
Nov 10 18:05:57 Salon kernel: [    0.263729] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff]
Nov 10 18:05:57 Salon kernel: [    0.263731] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
Nov 10 18:05:57 Salon kernel: [    0.263887] pci 0000:00:02.0: System wakeup disabled by ACPI
Nov 10 18:05:57 Salon kernel: [    0.263965] pci 0000:00:04.0: System wakeup disabled by ACPI
Nov 10 18:05:57 Salon kernel: [    0.264045] pci 0000:00:0a.0: System wakeup disabled by ACPI
Nov 10 18:05:57 Salon kernel: [    0.264158] pci 0000:00:11.0: set SATA to AHCI mode
Nov 10 18:05:57 Salon kernel: [    0.264323] pci 0000:00:12.0: System wakeup disabled by ACPI
Nov 10 18:05:57 Salon kernel: [    0.264435] pci 0000:00:12.1: System wakeup disabled by ACPI
Nov 10 18:05:57 Salon kernel: [    0.264592] pci 0000:00:12.2: System wakeup disabled by ACPI
Nov 10 18:05:57 Salon kernel: [    0.264709] pci 0000:00:13.0: System wakeup disabled by ACPI
Nov 10 18:05:57 Salon kernel: [    0.264832] pci 0000:00:13.1: System wakeup disabled by ACPI
Nov 10 18:05:57 Salon kernel: [    0.264989] pci 0000:00:13.2: System wakeup disabled by ACPI
Nov 10 18:05:57 Salon kernel: [    0.265393] pci 0000:00:14.2: System wakeup disabled by ACPI
Nov 10 18:05:57 Salon kernel: [    0.265576] pci 0000:00:14.4: System wakeup disabled by ACPI
Nov 10 18:05:57 Salon kernel: [    0.265687] pci 0000:00:14.5: System wakeup disabled by ACPI
Nov 10 18:05:57 Salon kernel: [    0.267811] pci 0000:00:02.0: PCI bridge to [bus 01]
Nov 10 18:05:57 Salon kernel: [    0.269815] pci 0000:00:04.0: PCI bridge to [bus 02]
Nov 10 18:05:57 Salon kernel: [    0.269996] pci 0000:03:00.0: System wakeup disabled by ACPI
Nov 10 18:05:57 Salon kernel: [    0.271818] pci 0000:00:0a.0: PCI bridge to [bus 03]
Nov 10 18:05:57 Salon kernel: [    0.271901] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
Nov 10 18:05:57 Salon kernel: [    0.290887] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 6 7 9 10 *11 12 14 15)
Nov 10 18:05:57 Salon kernel: [    0.290922] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *6 7 9 10 11 12 14 15)
Nov 10 18:05:57 Salon kernel: [    0.290953] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 6 7 9 *10 11 12 14 15)
Nov 10 18:05:57 Salon kernel: [    0.290984] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 6 7 9 *10 11 12 14 15)
Nov 10 18:05:57 Salon kernel: [    0.291014] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 6 7 9 10 11 12 14 15) *0, disabled.
Nov 10 18:05:57 Salon kernel: [    0.291045] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 6 7 9 10 11 12 14 15) *0, disabled.
Nov 10 18:05:57 Salon kernel: [    0.291075] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 6 7 *9 10 11 12 14 15)
Nov 10 18:05:57 Salon kernel: [    0.291105] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 7 9 10 11 12 14 15) *0, disabled.
Nov 10 18:05:57 Salon kernel: [    0.291217] ACPI: Enabled 1 GPEs in block 00 to 1F
Nov 10 18:05:57 Salon kernel: [    0.291320] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Nov 10 18:05:57 Salon kernel: [    0.291321] vgaarb: loaded
Nov 10 18:05:57 Salon kernel: [    0.291322] vgaarb: bridge control possible 0000:01:00.0
Nov 10 18:05:57 Salon kernel: [    0.291374] SCSI subsystem initialized
Nov 10 18:05:57 Salon kernel: [    0.291375] ACPI: bus type ATA registered
Nov 10 18:05:57 Salon kernel: [    0.291449] ACPI: bus type USB registered
Nov 10 18:05:57 Salon kernel: [    0.291462] usbcore: registered new interface driver usbfs
Nov 10 18:05:57 Salon kernel: [    0.291468] usbcore: registered new interface driver hub
Nov 10 18:05:57 Salon kernel: [    0.291485] usbcore: registered new device driver usb
Nov 10 18:05:57 Salon kernel: [    0.291535] PCI: Using ACPI for IRQ routing
Nov 10 18:05:57 Salon kernel: [    0.299906] NetLabel: Initializing
Nov 10 18:05:57 Salon kernel: [    0.299907] NetLabel:  domain hash size = 128
Nov 10 18:05:57 Salon kernel: [    0.299908] NetLabel:  protocols = UNLABELED CIPSOv4
Nov 10 18:05:57 Salon kernel: [    0.299915] NetLabel:  unlabeled traffic allowed by default
Nov 10 18:05:57 Salon kernel: [    0.299959] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
Nov 10 18:05:57 Salon kernel: [    0.299962] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Nov 10 18:05:57 Salon kernel: [    0.301999] Switched to clocksource hpet
Nov 10 18:05:57 Salon kernel: [    0.305939] pnp: PnP ACPI init
Nov 10 18:05:57 Salon kernel: [    0.305948] ACPI: bus type PNP registered
Nov 10 18:05:57 Salon kernel: [    0.306594] system 00:06: [io  0x0290-0x0297] has been reserved
Nov 10 18:05:57 Salon kernel: [    0.306596] system 00:06: [io  0x02a0-0x02af] has been reserved
Nov 10 18:05:57 Salon kernel: [    0.306701] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
Nov 10 18:05:57 Salon kernel: [    0.306703] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
Nov 10 18:05:57 Salon kernel: [    0.306856] system 00:09: [io  0x04d0-0x04d1] has been reserved
Nov 10 18:05:57 Salon kernel: [    0.306858] system 00:09: [io  0x040b] has been reserved
Nov 10 18:05:57 Salon kernel: [    0.306859] system 00:09: [io  0x04d6] has been reserved
Nov 10 18:05:57 Salon kernel: [    0.306861] system 00:09: [io  0x0c00-0x0c01] has been reserved
Nov 10 18:05:57 Salon kernel: [    0.306862] system 00:09: [io  0x0c14] has been reserved
Nov 10 18:05:57 Salon kernel: [    0.306864] system 00:09: [io  0x0c50-0x0c51] has been reserved
Nov 10 18:05:57 Salon kernel: [    0.306865] system 00:09: [io  0x0c52] has been reserved
Nov 10 18:05:57 Salon kernel: [    0.306867] system 00:09: [io  0x0c6c] has been reserved
Nov 10 18:05:57 Salon kernel: [    0.306868] system 00:09: [io  0x0c6f] has been reserved
Nov 10 18:05:57 Salon kernel: [    0.306870] system 00:09: [io  0x0cd0-0x0cd1] has been reserved
Nov 10 18:05:57 Salon kernel: [    0.306871] system 00:09: [io  0x0cd2-0x0cd3] has been reserved
Nov 10 18:05:57 Salon kernel: [    0.306873] system 00:09: [io  0x0cd4-0x0cd5] has been reserved
Nov 10 18:05:57 Salon kernel: [    0.306874] system 00:09: [io  0x0cd6-0x0cd7] has been reserved
Nov 10 18:05:57 Salon kernel: [    0.306876] system 00:09: [io  0x0cd8-0x0cdf] has been reserved
Nov 10 18:05:57 Salon kernel: [    0.306877] system 00:09: [io  0x0b00-0x0b3f] has been reserved
Nov 10 18:05:57 Salon kernel: [    0.306879] system 00:09: [io  0x0800-0x089f] could not be reserved
Nov 10 18:05:57 Salon kernel: [    0.306881] system 00:09: [io  0x0b00-0x0b0f] has been reserved
Nov 10 18:05:57 Salon kernel: [    0.306882] system 00:09: [io  0x0b20-0x0b3f] has been reserved
Nov 10 18:05:57 Salon kernel: [    0.306884] system 00:09: [io  0x0900-0x090f] has been reserved
Nov 10 18:05:57 Salon kernel: [    0.306885] system 00:09: [io  0x0910-0x091f] has been reserved
Nov 10 18:05:57 Salon kernel: [    0.306887] system 00:09: [io  0xfe00-0xfefe] has been reserved
Nov 10 18:05:57 Salon kernel: [    0.306889] system 00:09: [mem 0xcff00000-0xcfffffff] has been reserved
Nov 10 18:05:57 Salon kernel: [    0.306891] system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
Nov 10 18:05:57 Salon kernel: [    0.306892] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
Nov 10 18:05:57 Salon kernel: [    0.306931] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
Nov 10 18:05:57 Salon kernel: [    0.326196] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
Nov 10 18:05:57 Salon kernel: [    0.326199] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
Nov 10 18:05:57 Salon kernel: [    0.326201] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
Nov 10 18:05:57 Salon kernel: [    0.326203] system 00:0b: [mem 0x00100000-0xcfefffff] could not be reserved
Nov 10 18:05:57 Salon kernel: [    0.326204] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
Nov 10 18:05:57 Salon kernel: [    0.326277] pnp: PnP ACPI: found 12 devices
Nov 10 18:05:57 Salon kernel: [    0.326278] ACPI: bus type PNP unregistered
Nov 10 18:05:57 Salon kernel: [    0.332871] pci 0000:00:02.0: PCI bridge to [bus 01]
Nov 10 18:05:57 Salon kernel: [    0.332874] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
Nov 10 18:05:57 Salon kernel: [    0.332876] pci 0000:00:02.0:   bridge window [mem 0xfbd00000-0xfbdfffff]
Nov 10 18:05:57 Salon kernel: [    0.332879] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
Nov 10 18:05:57 Salon kernel: [    0.332881] pci 0000:00:04.0: PCI bridge to [bus 02]
Nov 10 18:05:57 Salon kernel: [    0.332884] pci 0000:00:04.0:   bridge window [mem 0xfbe00000-0xfbefffff]
Nov 10 18:05:57 Salon kernel: [    0.332887] pci 0000:00:0a.0: PCI bridge to [bus 03]
Nov 10 18:05:57 Salon kernel: [    0.332888] pci 0000:00:0a.0:   bridge window [io  0xe000-0xefff]
Nov 10 18:05:57 Salon kernel: [    0.332890] pci 0000:00:0a.0:   bridge window [mem 0xfbf00000-0xfbffffff]
Nov 10 18:05:57 Salon kernel: [    0.332892] pci 0000:00:0a.0:   bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
Nov 10 18:05:57 Salon kernel: [    0.332895] pci 0000:00:14.4: PCI bridge to [bus 04]
Nov 10 18:05:57 Salon kernel: [    0.333175] NET: Registered protocol family 2
Nov 10 18:05:57 Salon kernel: [    0.333356] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
Nov 10 18:05:57 Salon kernel: [    0.333660] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Nov 10 18:05:57 Salon kernel: [    0.333906] TCP: Hash tables configured (established 65536 bind 65536)
Nov 10 18:05:57 Salon kernel: [    0.333940] TCP: reno registered
Nov 10 18:05:57 Salon kernel: [    0.333951] UDP hash table entries: 4096 (order: 5, 131072 bytes)
Nov 10 18:05:57 Salon kernel: [    0.333995] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
Nov 10 18:05:57 Salon kernel: [    0.334094] NET: Registered protocol family 1
Nov 10 18:05:57 Salon kernel: [    0.647660] Unpacking initramfs...
Nov 10 18:05:57 Salon kernel: [    0.772883] Freeing initrd memory: 9324K (ffff880036dba000 - ffff8800376d5000)
Nov 10 18:05:57 Salon kernel: [    0.773088] PCI-DMA: Disabling AGP.
Nov 10 18:05:57 Salon kernel: [    0.773170] PCI-DMA: aperture base @ c4000000 size 65536 KB
Nov 10 18:05:57 Salon kernel: [    0.773171] PCI-DMA: using GART IOMMU.
Nov 10 18:05:57 Salon kernel: [    0.773174] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
Nov 10 18:05:57 Salon kernel: [    0.776954] LVT offset 1 assigned for vector 0x400
Nov 10 18:05:57 Salon kernel: [    0.776962] IBS: LVT offset 1 assigned
Nov 10 18:05:57 Salon kernel: [    0.776985] perf: AMD IBS detected (0x0000001f)
Nov 10 18:05:57 Salon kernel: [    0.777502] Initialise system trusted keyring
Nov 10 18:05:57 Salon kernel: [    0.777538] audit: initializing netlink socket (disabled)
Nov 10 18:05:57 Salon kernel: [    0.777548] type=2000 audit(1384103118.660:1): initialized
Nov 10 18:05:57 Salon kernel: [    0.796821] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Nov 10 18:05:57 Salon kernel: [    0.797913] zbud: loaded
Nov 10 18:05:57 Salon kernel: [    0.798051] VFS: Disk quotas dquot_6.5.2
Nov 10 18:05:57 Salon kernel: [    0.798083] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Nov 10 18:05:57 Salon kernel: [    0.798383] msgmni has been set to 15962
Nov 10 18:05:57 Salon kernel: [    0.799184] alg: No test for stdrng (krng)
Nov 10 18:05:57 Salon kernel: [    0.799195] NET: Registered protocol family 38
Nov 10 18:05:57 Salon kernel: [    0.799197] Key type asymmetric registered
Nov 10 18:05:57 Salon kernel: [    0.799198] Asymmetric key parser 'x509' registered
Nov 10 18:05:57 Salon kernel: [    0.799199] Asymmetric key parser 'pefile' registered
Nov 10 18:05:57 Salon kernel: [    0.799220] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Nov 10 18:05:57 Salon kernel: [    0.799260] io scheduler noop registered
Nov 10 18:05:57 Salon kernel: [    0.799261] io scheduler deadline registered
Nov 10 18:05:57 Salon kernel: [    0.799281] io scheduler cfq registered (default)
Nov 10 18:05:57 Salon kernel: [    0.799542] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 10 18:05:57 Salon kernel: [    0.799553] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Nov 10 18:05:57 Salon kernel: [    0.799645] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
Nov 10 18:05:57 Salon kernel: [    0.799648] ACPI: Power Button [PWRB]
Nov 10 18:05:57 Salon kernel: [    0.799683] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
Nov 10 18:05:57 Salon kernel: [    0.799684] ACPI: Power Button [PWRF]
Nov 10 18:05:57 Salon kernel: [    0.799726] ACPI: processor limited to max C-state 1
Nov 10 18:05:57 Salon kernel: [    0.800427] GHES: HEST is not enabled!
Nov 10 18:05:57 Salon kernel: [    0.800508] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Nov 10 18:05:57 Salon kernel: [    0.821157] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 10 18:05:57 Salon kernel: [    0.821595] Non-volatile memory driver v1.3
Nov 10 18:05:57 Salon kernel: [    0.821597] Linux agpgart interface v0.103
Nov 10 18:05:57 Salon kernel: [    0.822218] loop: module loaded
Nov 10 18:05:57 Salon kernel: [    0.822425] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
Nov 10 18:05:57 Salon kernel: [    0.822427] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
Nov 10 18:05:57 Salon kernel: [    0.822820] scsi0 : ahci
Nov 10 18:05:57 Salon kernel: [    0.822888] scsi1 : ahci
Nov 10 18:05:57 Salon kernel: [    0.822937] scsi2 : ahci
Nov 10 18:05:57 Salon kernel: [    0.822985] scsi3 : ahci
Nov 10 18:05:57 Salon kernel: [    0.823019] ata1: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffd00 irq 22
Nov 10 18:05:57 Salon kernel: [    0.823021] ata2: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffd80 irq 22
Nov 10 18:05:57 Salon kernel: [    0.823024] ata3: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffe00 irq 22
Nov 10 18:05:57 Salon kernel: [    0.823026] ata4: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffe80 irq 22
Nov 10 18:05:57 Salon kernel: [    0.823106] libphy: Fixed MDIO Bus: probed
Nov 10 18:05:57 Salon kernel: [    0.823178] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Nov 10 18:05:57 Salon kernel: [    0.823180] ehci-pci: EHCI PCI platform driver
Nov 10 18:05:57 Salon kernel: [    0.823286] ehci-pci 0000:00:12.2: EHCI Host Controller
Nov 10 18:05:57 Salon kernel: [    0.823331] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
Nov 10 18:05:57 Salon kernel: [    0.823336] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
Nov 10 18:05:57 Salon kernel: [    0.823346] ehci-pci 0000:00:12.2: debug port 1
Nov 10 18:05:57 Salon kernel: [    0.823379] ehci-pci 0000:00:12.2: irq 17, io mem 0xfbcff800
Nov 10 18:05:57 Salon kernel: [    0.828768] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
Nov 10 18:05:57 Salon kernel: [    0.828785] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Nov 10 18:05:57 Salon kernel: [    0.828786] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 10 18:05:57 Salon kernel: [    0.828788] usb usb1: Product: EHCI Host Controller
Nov 10 18:05:57 Salon kernel: [    0.828789] usb usb1: Manufacturer: Linux 3.11.7-200.fc19.x86_64 ehci_hcd
Nov 10 18:05:57 Salon kernel: [    0.828790] usb usb1: SerialNumber: 0000:00:12.2
Nov 10 18:05:57 Salon kernel: [    0.828886] hub 1-0:1.0: USB hub found
Nov 10 18:05:57 Salon kernel: [    0.828889] hub 1-0:1.0: 6 ports detected
Nov 10 18:05:57 Salon kernel: [    0.829090] ehci-pci 0000:00:13.2: EHCI Host Controller
Nov 10 18:05:57 Salon kernel: [    0.829126] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
Nov 10 18:05:57 Salon kernel: [    0.829129] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
Nov 10 18:05:57 Salon kernel: [    0.829139] ehci-pci 0000:00:13.2: debug port 1
Nov 10 18:05:57 Salon kernel: [    0.829169] ehci-pci 0000:00:13.2: irq 19, io mem 0xfbcff400
Nov 10 18:05:57 Salon kernel: [    0.834769] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
Nov 10 18:05:57 Salon kernel: [    0.834782] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Nov 10 18:05:57 Salon kernel: [    0.834783] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 10 18:05:57 Salon kernel: [    0.834784] usb usb2: Product: EHCI Host Controller
Nov 10 18:05:57 Salon kernel: [    0.834785] usb usb2: Manufacturer: Linux 3.11.7-200.fc19.x86_64 ehci_hcd
Nov 10 18:05:57 Salon kernel: [    0.834787] usb usb2: SerialNumber: 0000:00:13.2
Nov 10 18:05:57 Salon kernel: [    0.834880] hub 2-0:1.0: USB hub found
Nov 10 18:05:57 Salon kernel: [    0.834882] hub 2-0:1.0: 6 ports detected
Nov 10 18:05:57 Salon kernel: [    0.834989] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Nov 10 18:05:57 Salon kernel: [    0.834991] ohci-pci: OHCI PCI platform driver
Nov 10 18:05:57 Salon kernel: [    0.835089] ohci-pci 0000:00:12.0: OHCI PCI host controller
Nov 10 18:05:57 Salon kernel: [    0.835126] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
Nov 10 18:05:57 Salon kernel: [    0.835146] ohci-pci 0000:00:12.0: irq 16, io mem 0xfbcfe000
Nov 10 18:05:57 Salon kernel: [    0.889869] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Nov 10 18:05:57 Salon kernel: [    0.889871] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 10 18:05:57 Salon kernel: [    0.889872] usb usb3: Product: OHCI PCI host controller
Nov 10 18:05:57 Salon kernel: [    0.889873] usb usb3: Manufacturer: Linux 3.11.7-200.fc19.x86_64 ohci_hcd
Nov 10 18:05:57 Salon kernel: [    0.889875] usb usb3: SerialNumber: 0000:00:12.0
Nov 10 18:05:57 Salon kernel: [    0.889961] hub 3-0:1.0: USB hub found
Nov 10 18:05:57 Salon kernel: [    0.889966] hub 3-0:1.0: 3 ports detected
Nov 10 18:05:57 Salon kernel: [    0.890130] ohci-pci 0000:00:12.1: OHCI PCI host controller
Nov 10 18:05:57 Salon kernel: [    0.890167] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
Nov 10 18:05:57 Salon kernel: [    0.890179] ohci-pci 0000:00:12.1: irq 16, io mem 0xfbcfd000
Nov 10 18:05:57 Salon kernel: [    0.944938] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Nov 10 18:05:57 Salon kernel: [    0.944940] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 10 18:05:57 Salon kernel: [    0.944941] usb usb4: Product: OHCI PCI host controller
Nov 10 18:05:57 Salon kernel: [    0.944943] usb usb4: Manufacturer: Linux 3.11.7-200.fc19.x86_64 ohci_hcd
Nov 10 18:05:57 Salon kernel: [    0.944944] usb usb4: SerialNumber: 0000:00:12.1
Nov 10 18:05:57 Salon kernel: [    0.945029] hub 4-0:1.0: USB hub found
Nov 10 18:05:57 Salon kernel: [    0.945035] hub 4-0:1.0: 3 ports detected
Nov 10 18:05:57 Salon kernel: [    0.945195] ohci-pci 0000:00:13.0: OHCI PCI host controller
Nov 10 18:05:57 Salon kernel: [    0.945232] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
Nov 10 18:05:57 Salon kernel: [    0.945252] ohci-pci 0000:00:13.0: irq 18, io mem 0xfbcfc000
Nov 10 18:05:57 Salon kernel: [    1.000013] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Nov 10 18:05:57 Salon kernel: [    1.000016] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 10 18:05:57 Salon kernel: [    1.000017] usb usb5: Product: OHCI PCI host controller
Nov 10 18:05:57 Salon kernel: [    1.000018] usb usb5: Manufacturer: Linux 3.11.7-200.fc19.x86_64 ohci_hcd
Nov 10 18:05:57 Salon kernel: [    1.000019] usb usb5: SerialNumber: 0000:00:13.0
Nov 10 18:05:57 Salon kernel: [    1.000106] hub 5-0:1.0: USB hub found
Nov 10 18:05:57 Salon kernel: [    1.000110] hub 5-0:1.0: 3 ports detected
Nov 10 18:05:57 Salon kernel: [    1.000270] ohci-pci 0000:00:13.1: OHCI PCI host controller
Nov 10 18:05:57 Salon kernel: [    1.000306] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
Nov 10 18:05:57 Salon kernel: [    1.000321] ohci-pci 0000:00:13.1: irq 18, io mem 0xfbcfb000
Nov 10 18:05:57 Salon kernel: [    1.055081] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
Nov 10 18:05:57 Salon kernel: [    1.055083] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 10 18:05:57 Salon kernel: [    1.055084] usb usb6: Product: OHCI PCI host controller
Nov 10 18:05:57 Salon kernel: [    1.055086] usb usb6: Manufacturer: Linux 3.11.7-200.fc19.x86_64 ohci_hcd
Nov 10 18:05:57 Salon kernel: [    1.055087] usb usb6: SerialNumber: 0000:00:13.1
Nov 10 18:05:57 Salon kernel: [    1.055168] hub 6-0:1.0: USB hub found
Nov 10 18:05:57 Salon kernel: [    1.055173] hub 6-0:1.0: 3 ports detected
Nov 10 18:05:57 Salon kernel: [    1.055334] ohci-pci 0000:00:14.5: OHCI PCI host controller
Nov 10 18:05:57 Salon kernel: [    1.055369] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
Nov 10 18:05:57 Salon kernel: [    1.055381] ohci-pci 0000:00:14.5: irq 18, io mem 0xfbcfa000
Nov 10 18:05:57 Salon kernel: [    1.110158] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
Nov 10 18:05:57 Salon kernel: [    1.110160] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 10 18:05:57 Salon kernel: [    1.110162] usb usb7: Product: OHCI PCI host controller
Nov 10 18:05:57 Salon kernel: [    1.110163] usb usb7: Manufacturer: Linux 3.11.7-200.fc19.x86_64 ohci_hcd
Nov 10 18:05:57 Salon kernel: [    1.110164] usb usb7: SerialNumber: 0000:00:14.5
Nov 10 18:05:57 Salon kernel: [    1.110240] hub 7-0:1.0: USB hub found
Nov 10 18:05:57 Salon kernel: [    1.110245] hub 7-0:1.0: 2 ports detected
Nov 10 18:05:57 Salon kernel: [    1.110310] uhci_hcd: USB Universal Host Controller Interface driver
Nov 10 18:05:57 Salon kernel: [    1.110375] xhci_hcd 0000:02:00.0: xHCI Host Controller
Nov 10 18:05:57 Salon kernel: [    1.110415] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
Nov 10 18:05:57 Salon kernel: [    1.110614] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
Nov 10 18:05:57 Salon kernel: [    1.110616] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 10 18:05:57 Salon kernel: [    1.110617] usb usb8: Product: xHCI Host Controller
Nov 10 18:05:57 Salon kernel: [    1.110618] usb usb8: Manufacturer: Linux 3.11.7-200.fc19.x86_64 xhci_hcd
Nov 10 18:05:57 Salon kernel: [    1.110619] usb usb8: SerialNumber: 0000:02:00.0
Nov 10 18:05:57 Salon kernel: [    1.110682] hub 8-0:1.0: USB hub found
Nov 10 18:05:57 Salon kernel: [    1.110686] hub 8-0:1.0: 2 ports detected
Nov 10 18:05:57 Salon kernel: [    1.110729] xhci_hcd 0000:02:00.0: xHCI Host Controller
Nov 10 18:05:57 Salon kernel: [    1.110759] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
Nov 10 18:05:57 Salon kernel: [    1.113895] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
Nov 10 18:05:57 Salon kernel: [    1.113896] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 10 18:05:57 Salon kernel: [    1.113898] usb usb9: Product: xHCI Host Controller
Nov 10 18:05:57 Salon kernel: [    1.113899] usb usb9: Manufacturer: Linux 3.11.7-200.fc19.x86_64 xhci_hcd
Nov 10 18:05:57 Salon kernel: [    1.113900] usb usb9: SerialNumber: 0000:02:00.0
Nov 10 18:05:57 Salon kernel: [    1.113979] hub 9-0:1.0: USB hub found
Nov 10 18:05:57 Salon kernel: [    1.113986] hub 9-0:1.0: 2 ports detected
Nov 10 18:05:57 Salon kernel: [    1.119206] usbcore: registered new interface driver usbserial
Nov 10 18:05:57 Salon kernel: [    1.119213] usbcore: registered new interface driver usbserial_generic
Nov 10 18:05:57 Salon kernel: [    1.119217] usbserial: USB Serial support registered for generic
Nov 10 18:05:57 Salon kernel: [    1.119239] i8042: PNP: No PS/2 controller found. Probing ports directly.
Nov 10 18:05:57 Salon kernel: [    1.119600] serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 10 18:05:57 Salon kernel: [    1.119605] serio: i8042 AUX port at 0x60,0x64 irq 12
Nov 10 18:05:57 Salon kernel: [    1.119712] mousedev: PS/2 mouse device common for all mice
Nov 10 18:05:57 Salon kernel: [    1.119845] rtc_cmos 00:01: RTC can wake from S4
Nov 10 18:05:57 Salon kernel: [    1.119947] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
Nov 10 18:05:57 Salon kernel: [    1.119970] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Nov 10 18:05:57 Salon kernel: [    1.120018] device-mapper: uevent: version 1.0.3
Nov 10 18:05:57 Salon kernel: [    1.120064] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
Nov 10 18:05:57 Salon kernel: [    1.120105] cpuidle: using governor menu
Nov 10 18:05:57 Salon kernel: [    1.120388] hidraw: raw HID events driver (C) Jiri Kosina
Nov 10 18:05:57 Salon kernel: [    1.120452] usbcore: registered new interface driver usbhid
Nov 10 18:05:57 Salon kernel: [    1.120454] usbhid: USB HID core driver
Nov 10 18:05:57 Salon kernel: [    1.120483] drop_monitor: Initializing network drop monitor service
Nov 10 18:05:57 Salon kernel: [    1.120539] ip_tables: (C) 2000-2006 Netfilter Core Team
Nov 10 18:05:57 Salon kernel: [    1.120584] TCP: cubic registered
Nov 10 18:05:57 Salon kernel: [    1.120585] Initializing XFRM netlink socket
Nov 10 18:05:57 Salon kernel: [    1.120655] NET: Registered protocol family 10
Nov 10 18:05:57 Salon kernel: [    1.120800] mip6: Mobile IPv6
Nov 10 18:05:57 Salon kernel: [    1.120801] NET: Registered protocol family 17
Nov 10 18:05:57 Salon kernel: [    1.121059] Loading compiled-in X.509 certificates
Nov 10 18:05:57 Salon kernel: [    1.121917] Loaded X.509 cert 'Fedora kernel signing key: 81c09e5678f2460566af2ede383d4b66d9cd13f7'
Nov 10 18:05:57 Salon kernel: [    1.121925] registered taskstats version 1
Nov 10 18:05:57 Salon kernel: [    1.122565]   Magic number: 5:99:87
Nov 10 18:05:57 Salon kernel: [    1.122591] button LNXPWRBN:00: hash matches
Nov 10 18:05:57 Salon kernel: [    1.122640] rtc_cmos 00:01: setting system clock to 2013-11-10 17:05:20 UTC (1384103120)
Nov 10 18:05:57 Salon kernel: [    1.128208] ata4: SATA link down (SStatus 0 SControl 300)
Nov 10 18:05:57 Salon kernel: [    1.283386] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 10 18:05:57 Salon kernel: [    1.283410] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Nov 10 18:05:57 Salon kernel: [    1.284356] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 10 18:05:57 Salon kernel: [    1.285008] ata3.00: ATA-9: Samsung SSD 840 PRO Series, DXM05B0Q, max UDMA/133
Nov 10 18:05:57 Salon kernel: [    1.285010] ata3.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Nov 10 18:05:57 Salon kernel: [    1.285026] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB06, max MWDMA2
Nov 10 18:05:57 Salon kernel: [    1.285218] ata2.00: ATA-8: WDC WD5000AAKX-001CA0, 15.01H15, max UDMA/133
Nov 10 18:05:57 Salon kernel: [    1.285220] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Nov 10 18:05:57 Salon kernel: [    1.285378] ata3.00: configured for UDMA/133
Nov 10 18:05:57 Salon kernel: [    1.286389] ata2.00: configured for UDMA/133
Nov 10 18:05:57 Salon kernel: [    1.462605] usb 3-1: new low-speed USB device number 2 using ohci-pci
Nov 10 18:05:57 Salon kernel: [    1.614867] usb 3-1: New USB device found, idVendor=145f, idProduct=0176
Nov 10 18:05:57 Salon kernel: [    1.614870] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Nov 10 18:05:57 Salon kernel: [    1.614871] usb 3-1: Product: Trust Keyboard
Nov 10 18:05:57 Salon kernel: [    1.623026] input: Trust Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input2
Nov 10 18:05:57 Salon kernel: [    1.623110] hid-generic 0003:145F:0176.0001: input,hidraw0: USB HID v1.11 Keyboard [Trust Keyboard] on usb-0000:00:12.0-1/input0
Nov 10 18:05:57 Salon kernel: [    1.631939] input: Trust Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input3
Nov 10 18:05:57 Salon kernel: [    1.632021] hid-generic 0003:145F:0176.0002: input,hidraw1: USB HID v1.11 Device [Trust Keyboard] on usb-0000:00:12.0-1/input1
Nov 10 18:05:57 Salon kernel: [    1.754995] usb 3-2: new low-speed USB device number 3 using ohci-pci
Nov 10 18:05:57 Salon kernel: [    1.781048] tsc: Refined TSC clocksource calibration: 3214.321 MHz
Nov 10 18:05:57 Salon kernel: [    1.904253] usb 3-2: New USB device found, idVendor=046d, idProduct=c05b
Nov 10 18:05:57 Salon kernel: [    1.904255] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Nov 10 18:05:57 Salon kernel: [    1.904257] usb 3-2: Product: USB Optical Mouse
Nov 10 18:05:57 Salon kernel: [    1.904258] usb 3-2: Manufacturer: Logitech
Nov 10 18:05:57 Salon kernel: [    1.911386] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input4
Nov 10 18:05:57 Salon kernel: [    1.911493] hid-generic 0003:046D:C05B.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-2/input0
Nov 10 18:05:57 Salon kernel: [    2.087256] ata1.00: configured for PIO4
Nov 10 18:05:57 Salon kernel: [    2.782529] Switched to clocksource tsc
Nov 10 18:05:57 Salon kernel: [    2.890264] scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S223C  SB06 PQ: 0 ANSI: 5
Nov 10 18:05:57 Salon kernel: [    2.893394] sr0: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray
Nov 10 18:05:57 Salon kernel: [    2.893396] cdrom: Uniform CD-ROM driver Revision: 3.20
Nov 10 18:05:57 Salon kernel: [    2.893539] sr 0:0:0:0: Attached scsi generic sg0 type 5
Nov 10 18:05:57 Salon kernel: [    2.893670] scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-0 15.0 PQ: 0 ANSI: 5
Nov 10 18:05:57 Salon kernel: [    2.893760] sd 1:0:0:0: Attached scsi generic sg1 type 0
Nov 10 18:05:57 Salon kernel: [    2.893762] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Nov 10 18:05:57 Salon kernel: [    2.893823] sd 1:0:0:0: [sda] Write Protect is off
Nov 10 18:05:57 Salon kernel: [    2.893855] scsi 2:0:0:0: Direct-Access     ATA      Samsung SSD 840  DXM0 PQ: 0 ANSI: 5
Nov 10 18:05:57 Salon kernel: [    2.893860] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov 10 18:05:57 Salon kernel: [    2.893946] sd 2:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
Nov 10 18:05:57 Salon kernel: [    2.893963] sd 2:0:0:0: Attached scsi generic sg2 type 0
Nov 10 18:05:57 Salon kernel: [    2.894016] sd 2:0:0:0: [sdb] Write Protect is off
Nov 10 18:05:57 Salon kernel: [    2.894044] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov 10 18:05:57 Salon kernel: [    2.895117]  sdb: sdb1 sdb2 sdb3
Nov 10 18:05:57 Salon kernel: [    2.895443] sd 2:0:0:0: [sdb] Attached SCSI disk
Nov 10 18:05:57 Salon kernel: [    2.906637]  sda: sda1
Nov 10 18:05:57 Salon kernel: [    2.906890] sd 1:0:0:0: [sda] Attached SCSI disk
Nov 10 18:05:57 Salon kernel: [    2.907847] Freeing unused kernel memory: 1420K (ffffffff81cf9000 - ffffffff81e5c000)
Nov 10 18:05:57 Salon kernel: [    2.907849] Write protecting the kernel read-only data: 12288k
Nov 10 18:05:57 Salon kernel: [    2.911307] Freeing unused kernel memory: 1672K (ffff88000165e000 - ffff880001800000)
Nov 10 18:05:57 Salon kernel: [    2.913697] Freeing unused kernel memory: 1228K (ffff880001acd000 - ffff880001c00000)
Nov 10 18:05:57 Salon kernel: [    2.964636] [drm] Initialized drm 1.1.0 20060810
Nov 10 18:05:57 Salon kernel: [    2.969032] scsi4 : pata_atiixp
Nov 10 18:05:57 Salon kernel: [    2.969472] scsi5 : pata_atiixp
Nov 10 18:05:57 Salon kernel: [    2.969698] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
Nov 10 18:05:57 Salon kernel: [    2.969700] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
Nov 10 18:05:57 Salon kernel: [    2.985743] [drm] radeon kernel modesetting enabled.
Nov 10 18:05:57 Salon kernel: [    2.985996] [drm] initializing kernel modesetting (REDWOOD 0x1002:0x68D9 0x1043:0x036C).
Nov 10 18:05:57 Salon kernel: [    2.986012] [drm] register mmio base: 0xFBDE0000
Nov 10 18:05:57 Salon kernel: [    2.986013] [drm] register mmio size: 131072
Nov 10 18:05:57 Salon kernel: [    2.986629] ATOM BIOS: 68D9.12.19.0.3.AS03
Nov 10 18:05:57 Salon kernel: [    2.986680] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
Nov 10 18:05:57 Salon kernel: [    2.986683] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
Nov 10 18:05:57 Salon kernel: [    2.986684] [drm] Detected VRAM RAM=1024M, BAR=256M
Nov 10 18:05:57 Salon kernel: [    2.986685] [drm] RAM width 128bits DDR
Nov 10 18:05:57 Salon kernel: [    2.986727] [TTM] Zone  kernel: Available graphics memory: 4088542 kiB
Nov 10 18:05:57 Salon kernel: [    2.986728] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
Nov 10 18:05:57 Salon kernel: [    2.986730] [TTM] Initializing pool allocator
Nov 10 18:05:57 Salon kernel: [    2.986733] [TTM] Initializing DMA pool allocator
Nov 10 18:05:57 Salon kernel: [    2.986752] [drm] radeon: 1024M of VRAM memory ready
Nov 10 18:05:57 Salon kernel: [    2.986753] [drm] radeon: 512M of GTT memory ready.
Nov 10 18:05:57 Salon kernel: [    2.986906] [drm] GART: num cpu pages 131072, num gpu pages 131072
Nov 10 18:05:57 Salon kernel: [    2.987579] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
Nov 10 18:05:57 Salon kernel: [    2.990299] [drm] Loading REDWOOD Microcode
Nov 10 18:05:57 Salon kernel: [    2.990917] [drm] PCIE GART of 512M enabled (table at 0x000000000025D000).
Nov 10 18:05:57 Salon kernel: [    2.991006] radeon 0000:01:00.0: WB enabled
Nov 10 18:05:57 Salon kernel: [    2.991009] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88022112dc00
Nov 10 18:05:57 Salon kernel: [    2.991010] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88022112dc0c
Nov 10 18:05:57 Salon kernel: [    2.991383] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc90010f9c418
Nov 10 18:05:57 Salon kernel: [    2.991385] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Nov 10 18:05:57 Salon kernel: [    2.991386] [drm] Driver supports precise vblank timestamp query.
Nov 10 18:05:57 Salon kernel: [    2.991411] radeon 0000:01:00.0: radeon: using MSI.
Nov 10 18:05:57 Salon kernel: [    2.991431] [drm] radeon: irq initialized.
Nov 10 18:05:57 Salon kernel: [    3.007686] [drm] ring test on 0 succeeded in 1 usecs
Nov 10 18:05:57 Salon kernel: [    3.007743] [drm] ring test on 3 succeeded in 1 usecs
Nov 10 18:05:57 Salon kernel: [    3.205159] [drm] ring test on 5 succeeded in 1 usecs
Nov 10 18:05:57 Salon kernel: [    3.205161] [drm] UVD initialized successfully.
Nov 10 18:05:57 Salon kernel: [    3.205262] [drm] ib test on ring 0 succeeded in 0 usecs
Nov 10 18:05:57 Salon kernel: [    3.205282] [drm] ib test on ring 3 succeeded in 0 usecs
Nov 10 18:05:57 Salon kernel: [    3.376953] [drm] ib test on ring 5 succeeded
Nov 10 18:05:57 Salon kernel: [    3.377159] [drm] Radeon Display Connectors
Nov 10 18:05:57 Salon kernel: [    3.377161] [drm] Connector 0:
Nov 10 18:05:57 Salon kernel: [    3.377161] [drm]   HDMI-A-1
Nov 10 18:05:57 Salon kernel: [    3.377162] [drm]   HPD2
Nov 10 18:05:57 Salon kernel: [    3.377164] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
Nov 10 18:05:57 Salon kernel: [    3.377164] [drm]   Encoders:
Nov 10 18:05:57 Salon kernel: [    3.377165] [drm]     DFP1: INTERNAL_UNIPHY2
Nov 10 18:05:57 Salon kernel: [    3.377166] [drm] Connector 1:
Nov 10 18:05:57 Salon kernel: [    3.377167] [drm]   DVI-I-1
Nov 10 18:05:57 Salon kernel: [    3.377167] [drm]   HPD1
Nov 10 18:05:57 Salon kernel: [    3.377169] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
Nov 10 18:05:57 Salon kernel: [    3.377169] [drm]   Encoders:
Nov 10 18:05:57 Salon kernel: [    3.377170] [drm]     DFP2: INTERNAL_UNIPHY1
Nov 10 18:05:57 Salon kernel: [    3.377171] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
Nov 10 18:05:57 Salon kernel: [    3.377172] [drm] Connector 2:
Nov 10 18:05:57 Salon kernel: [    3.377172] [drm]   VGA-1
Nov 10 18:05:57 Salon kernel: [    3.377173] [drm]   DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
Nov 10 18:05:57 Salon kernel: [    3.377174] [drm]   Encoders:
Nov 10 18:05:57 Salon kernel: [    3.377175] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
Nov 10 18:05:57 Salon kernel: [    3.377210] [drm] Internal thermal controller without fan control
Nov 10 18:05:57 Salon kernel: [    3.377237] [drm] radeon: power management initialized
Nov 10 18:05:57 Salon kernel: [    3.418196] [drm] fb mappable at 0xD035F000
Nov 10 18:05:57 Salon kernel: [    3.418198] [drm] vram apper at 0xD0000000
Nov 10 18:05:57 Salon kernel: [    3.418199] [drm] size 8294400
Nov 10 18:05:57 Salon kernel: [    3.418200] [drm] fb depth is 24
Nov 10 18:05:57 Salon kernel: [    3.418201] [drm]    pitch is 7680
Nov 10 18:05:57 Salon kernel: [    3.418247] fbcon: radeondrmfb (fb0) is primary device
Nov 10 18:05:57 Salon kernel: [    3.629435] Console: switching to colour frame buffer device 240x67
Nov 10 18:05:57 Salon kernel: [    3.634755] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
Nov 10 18:05:57 Salon kernel: [    3.634756] radeon 0000:01:00.0: registered panic notifier
Nov 10 18:05:57 Salon kernel: [    3.634759] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:00.0 on minor 0
Nov 10 18:05:57 Salon kernel: [   33.722569] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
Nov 10 18:05:57 Salon kernel: [   33.887889] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Nov 10 18:05:57 Salon kernel: [   33.887894] ata1.00: failed command: IDENTIFY PACKET DEVICE
Nov 10 18:05:57 Salon kernel: [   33.887898] ata1.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
Nov 10 18:05:57 Salon kernel: [   33.887898]          res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
Nov 10 18:05:57 Salon kernel: [   33.887901] ata1.00: status: { DRDY }
Nov 10 18:05:57 Salon kernel: [   33.887904] ata1: hard resetting link
Nov 10 18:05:57 Salon kernel: [   34.348498] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Nov 10 18:05:57 Salon kernel: [   35.152149] ata1.00: configured for PIO4
Nov 10 18:05:57 Salon kernel: [   35.953852] ata1: EH complete
Nov 10 18:05:57 Salon kernel: [   36.007477] type=1404 audit(1384103155.336:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
Nov 10 18:05:57 Salon kernel: [   36.402413] type=1403 audit(1384103155.731:3): policy loaded auid=4294967295 ses=4294967295
Nov 10 18:05:57 Salon kernel: [   36.684197] acpi-cpufreq: overriding BIOS provided _PSD data
Nov 10 18:05:57 Salon kernel: [   36.685397] wmi: Mapper loaded
Nov 10 18:05:57 Salon kernel: [   36.688427] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Nov 10 18:05:57 Salon kernel: [   36.691812] EXT4-fs (sdb2): re-mounted. Opts: discard
Nov 10 18:05:57 Salon kernel: [   36.693005] parport_pc 00:05: reported by Plug and Play ACPI
Nov 10 18:05:57 Salon kernel: [   36.693056] parport0: PC-style at 0x378, irq 7 [PCSPP]
Nov 10 18:05:57 Salon kernel: [   36.703616] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Nov 10 18:05:57 Salon kernel: [   36.703627] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
Nov 10 18:05:57 Salon kernel: [   36.703943] r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xffffc90010ebe000, bc:ae:c5:e5:d1:48, XID 083000c0 IRQ 49
Nov 10 18:05:57 Salon kernel: [   36.703945] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Nov 10 18:05:57 Salon kernel: [   36.717676] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20130517/utaddress-251)
Nov 10 18:05:57 Salon kernel: [   36.717684] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 2 (20130517/utaddress-251)
Nov 10 18:05:57 Salon kernel: [   36.717689] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Nov 10 18:05:57 Salon kernel: [   36.719269] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
Nov 10 18:05:57 Salon kernel: [   36.719310] sp5100_tco: PCI Revision ID: 0x3c
Nov 10 18:05:57 Salon kernel: [   36.719328] sp5100_tco: failed to find MMIO address, giving up.
Nov 10 18:05:57 Salon kernel: [   36.728691] MCE: In-kernel MCE decoding enabled.
Nov 10 18:05:57 Salon kernel: [   36.730534] EDAC MC: Ver: 3.0.0
Nov 10 18:05:57 Salon kernel: [   36.733337] AMD64 EDAC driver v3.4.0
Nov 10 18:05:57 Salon kernel: [   36.734405] EDAC amd64: DRAM ECC disabled.
Nov 10 18:05:57 Salon kernel: [   36.734414] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Nov 10 18:05:57 Salon kernel: [   36.734414]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
Nov 10 18:05:57 Salon kernel: [   36.734414]  (Note that use of the override may cause unknown side effects.)
Nov 10 18:05:57 Salon kernel: [   36.740786] microcode: CPU0: patch_level=0x010000b6
Nov 10 18:05:57 Salon kernel: [   36.746352] microcode: CPU0: new patch_level=0x010000c8
Nov 10 18:05:57 Salon kernel: [   36.746362] microcode: CPU1: patch_level=0x010000b6
Nov 10 18:05:57 Salon kernel: [   36.746368] microcode: CPU1: new patch_level=0x010000c8
Nov 10 18:05:57 Salon kernel: [   36.746377] microcode: CPU2: patch_level=0x010000b6
Nov 10 18:05:57 Salon kernel: [   36.746382] microcode: CPU2: new patch_level=0x010000c8
Nov 10 18:05:57 Salon kernel: [   36.746388] microcode: CPU3: patch_level=0x010000b6
Nov 10 18:05:57 Salon kernel: [   36.746405] microcode: CPU3: new patch_level=0x010000c8
Nov 10 18:05:57 Salon kernel: [   36.746687] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Nov 10 18:05:57 Salon kernel: [   36.761914] kvm: Nested Virtualization enabled
Nov 10 18:05:57 Salon kernel: [   36.761921] kvm: Nested Paging enabled
Nov 10 18:05:57 Salon kernel: [   36.770276] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
Nov 10 18:05:57 Salon kernel: [   36.770398] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
Nov 10 18:05:57 Salon kernel: [   36.770467] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
Nov 10 18:05:57 Salon kernel: [   36.770530] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
Nov 10 18:05:57 Salon kernel: [   36.771111] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
Nov 10 18:05:57 Salon kernel: [   36.771758] ALSA sound/pci/hda/hda_intel.c:3116 0000:01:00.1: Handle VGA-switcheroo audio client
Nov 10 18:05:57 Salon kernel: [   36.779832] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
Nov 10 18:05:57 Salon kernel: [   36.787319] ppdev: user-space parallel port driver
Nov 10 18:05:57 Salon kernel: [   36.798952] Adding 4201468k swap on /dev/sdb3.  Priority:-1 extents:1 across:4201468k SSFS
Nov 10 18:05:57 Salon kernel: [   36.851519] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: discard
Nov 10 18:05:57 Salon kernel: [   36.903120] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Nov 10 18:05:57 Salon kernel: [   37.942399] type=1305 audit(1384103157.269:4): audit_pid=294 old=0 auid=4294967295 ses=4294967295
Nov 10 18:05:57 Salon kernel: [   37.942399]  subj=system_u:system_r:auditd_t:s0 res=1
Nov 10 18:05:57 Salon systemd[1]: Started Security Auditing Service.
Nov 10 18:05:57 Salon systemd[1]: Started Trigger Flushing of Journal to Persistent Storage.
Nov 10 18:05:57 Salon systemd[1]: Started Tell Plymouth To Write Out Runtime Data.
Nov 10 18:05:57 Salon systemd[1]: Started Recreate Volatile Files and Directories.
Nov 10 18:05:57 Salon systemd[1]: Starting System Initialization.
Nov 10 18:05:57 Salon systemd[1]: Reached target System Initialization.
Nov 10 18:05:57 Salon systemd[1]: Starting Daily Cleanup of Temporary Directories.
Nov 10 18:05:57 Salon systemd[1]: Started Daily Cleanup of Temporary Directories.
Nov 10 18:05:57 Salon systemd[1]: Starting Timers.
Nov 10 18:05:57 Salon systemd[1]: Reached target Timers.
Nov 10 18:05:57 Salon systemd[1]: Starting Manage Sound Card State (restore and store)...
Nov 10 18:05:57 Salon abrtd[344]: Init complete, entering main loop
Nov 10 18:05:57 Salon auditd[294]: Started dispatcher: /sbin/audispd pid: 304
Nov 10 18:05:57 Salon audispd: audispd initialized with q_depth=150 and 1 active plugins
Nov 10 18:05:57 Salon auditd[294]: Init complete, auditd 2.3.2 listening for events (startup state enable)
Nov 10 18:05:57 Salon alsactl[310]: alsactl 1.0.27.2 daemon started
Nov 10 18:05:57 Salon chronyd[315]: chronyd version 1.29 starting
Nov 10 18:05:57 Salon chronyd[315]: Linux kernel major=3 minor=11 patch=7
Nov 10 18:05:57 Salon chronyd[315]: hz=100 shift_hz=7 freq_scale=1.00000000 nominal_tick=10000 slew_delta_tick=833 max_tick_bias=1000 shift_pll=2
Nov 10 18:05:57 Salon chronyd[315]: Frequency 24.091 +/- 3.622 ppm read from /var/lib/chrony/drift
Nov 10 18:05:57 Salon avahi-daemon[322]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
Nov 10 18:05:57 Salon avahi-daemon[322]: Successfully dropped root privileges.
Nov 10 18:05:57 Salon dbus[326]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service'
Nov 10 18:05:57 Salon avahi-daemon[322]: avahi-daemon 0.6.31 starting up.
Nov 10 18:05:57 Salon avahi-daemon[322]: Successfully called chroot().
Nov 10 18:05:57 Salon avahi-daemon[322]: Successfully dropped remaining capabilities.
Nov 10 18:05:57 Salon avahi-daemon[322]: No service file found in /etc/avahi/services.
Nov 10 18:05:57 Salon avahi-daemon[322]: Network interface enumeration completed.
Nov 10 18:05:57 Salon avahi-daemon[322]: Registering HINFO record with values 'X86_64'/'LINUX'.
Nov 10 18:05:57 Salon avahi-daemon[322]: Server startup complete. Host name is Salon.local. Local service cookie is 4240648217.
Nov 10 18:05:57 Salon polkitd[377]: Started polkitd version 0.112
Nov 10 18:05:57 Salon systemd[1]: Starting Authorization Manager...
Nov 10 18:05:57 Salon systemd-logind[320]: New seat seat0.
Nov 10 18:05:57 Salon systemd[1]: Started Login Service.
Nov 10 18:05:57 Salon systemd-logind[320]: Watching system buttons on /dev/input/event1 (Power Button)
Nov 10 18:05:57 Salon systemd-logind[320]: Watching system buttons on /dev/input/event0 (Power Button)
Nov 10 18:05:57 Salon systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Nov 10 18:05:57 Salon systemd[1]: Started GNOME Display Manager.
Nov 10 18:05:57 Salon rngd[316]: Unable to open file: /dev/tpm0
Nov 10 18:05:57 Salon rngd[316]: can't open any entropy source
Nov 10 18:05:57 Salon rngd[316]: Maybe RNG device modules are not loaded
Nov 10 18:05:57 Salon dbus-daemon[326]: dbus[326]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service'
Nov 10 18:05:57 Salon dbus-daemon[326]: dbus[326]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.5" (uid=0 pid=343 comm="/usr/sbin/gdm ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.7" (uid=0 pid=382 comm="/usr/libexec/gdm-simple-slave --display-id /org/gn")
Nov 10 18:05:57 Salon dbus[326]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.5" (uid=0 pid=343 comm="/usr/sbin/gdm ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.7" (uid=0 pid=382 comm="/usr/libexec/gdm-simple-slave --display-id /org/gn")
Nov 10 18:05:57 Salon dbus-daemon[326]: dbus[326]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Nov 10 18:05:57 Salon dbus[326]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Nov 10 18:05:57 Salon systemd[1]: Started Authorization Manager.
Nov 10 18:05:57 Salon kernel: [   38.405828] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Nov 10 18:05:57 Salon accounts-daemon[327]: started daemon version 0.6.34
Nov 10 18:05:57 Salon systemd[1]: Started Accounts Service.
Nov 10 18:05:57 Salon kernel: [   38.420846] ip6_tables: (C) 2000-2006 Netfilter Core Team
Nov 10 18:05:57 Salon kernel: [   38.501335] Ebtables v2.0 registered
Nov 10 18:05:57 Salon kernel: [   38.550859] Bridge firewalling registered
Nov 10 18:05:57 Salon systemd[1]: Started firewalld - dynamic firewall daemon.
Nov 10 18:05:57 Salon systemd[1]: Starting Network Manager...
Nov 10 18:05:57 Salon NetworkManager[432]: <info> NetworkManager (version 0.9.8.8-1.fc19) is starting...
Nov 10 18:05:57 Salon NetworkManager[432]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
Nov 10 18:05:57 Salon NetworkManager[432]: <info> WEXT support is enabled
Nov 10 18:05:57 Salon NetworkManager[432]: <info> VPN: loaded org.freedesktop.NetworkManager.openconnect
Nov 10 18:05:57 Salon NetworkManager[432]: <info> VPN: loaded org.freedesktop.NetworkManager.l2tp
Nov 10 18:05:57 Salon NetworkManager[432]: <info> VPN: loaded org.freedesktop.NetworkManager.pptp
Nov 10 18:05:57 Salon NetworkManager[432]: <info> VPN: loaded org.freedesktop.NetworkManager.openvpn
Nov 10 18:05:57 Salon NetworkManager[432]: <info> VPN: loaded org.freedesktop.NetworkManager.vpnc
Nov 10 18:05:57 Salon NetworkManager[432]:    ifcfg-rh: Acquired D-Bus service com.redhat.ifcfgrh1
Nov 10 18:05:57 Salon NetworkManager[432]: <info> Loaded plugin ifcfg-rh: (c) 2007 - 2010 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Nov 10 18:05:58 Salon NetworkManager[432]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Nov 10 18:05:58 Salon NetworkManager[432]:    ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-lo ...
Nov 10 18:05:58 Salon NetworkManager[432]:    ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-enp3s0 ...
Nov 10 18:05:58 Salon NetworkManager[432]:    ifcfg-rh:     read connection 'enp3s0'
Nov 10 18:05:58 Salon dbus-daemon[326]: dbus[326]: [system] Activating service name='org.freedesktop.ModemManager' (using servicehelper)
Nov 10 18:05:58 Salon dbus[326]: [system] Activating service name='org.freedesktop.ModemManager' (using servicehelper)
Nov 10 18:05:58 Salon dbus-daemon[326]: modem-manager[445]: <info>  ModemManager (version 0.6.2.0-1.fc19) starting...
Nov 10 18:05:58 Salon modem-manager[445]: <info>  ModemManager (version 0.6.2.0-1.fc19) starting...
Nov 10 18:05:58 Salon NetworkManager[432]: <info> monitoring kernel firmware directory '/lib/firmware'.
Nov 10 18:05:58 Salon dbus[326]: [system] Successfully activated service 'org.freedesktop.ModemManager'
Nov 10 18:05:58 Salon dbus-daemon[326]: dbus[326]: [system] Successfully activated service 'org.freedesktop.ModemManager'
Nov 10 18:05:58 Salon dbus-daemon[326]: modem-manager[445]: <info>  Loaded plugin 'Option'
Nov 10 18:05:58 Salon dbus-daemon[326]: modem-manager[445]: <info>  Loaded plugin 'Samsung'
Nov 10 18:05:58 Salon dbus-daemon[326]: modem-manager[445]: <info>  Loaded plugin 'Nokia'
Nov 10 18:05:58 Salon dbus-daemon[326]: modem-manager[445]: <info>  Loaded plugin 'Novatel'
Nov 10 18:05:58 Salon dbus-daemon[326]: modem-manager[445]: <info>  Loaded plugin 'Linktop'
Nov 10 18:05:58 Salon dbus-daemon[326]: modem-manager[445]: <info>  Loaded plugin 'X22X'
Nov 10 18:05:58 Salon dbus-daemon[326]: modem-manager[445]: <info>  Loaded plugin 'Wavecom'
Nov 10 18:05:58 Salon dbus-daemon[326]: modem-manager[445]: <info>  Loaded plugin 'Sierra'
Nov 10 18:05:58 Salon dbus-daemon[326]: modem-manager[445]: <info>  Loaded plugin 'SimTech'
Nov 10 18:05:58 Salon dbus-daemon[326]: modem-manager[445]: <info>  Loaded plugin 'AnyData'
Nov 10 18:05:58 Salon dbus-daemon[326]: modem-manager[445]: <info>  Loaded plugin 'Huawei'
Nov 10 18:05:58 Salon dbus-daemon[326]: modem-manager[445]: <info>  Loaded plugin 'MotoC'
Nov 10 18:05:58 Salon modem-manager[445]: <info>  Loaded plugin 'Option'
Nov 10 18:05:58 Salon modem-manager[445]: <info>  Loaded plugin 'Samsung'
Nov 10 18:05:58 Salon modem-manager[445]: <info>  Loaded plugin 'Nokia'
Nov 10 18:05:58 Salon modem-manager[445]: <info>  Loaded plugin 'Novatel'
Nov 10 18:05:58 Salon modem-manager[445]: <info>  Loaded plugin 'Linktop'
Nov 10 18:05:58 Salon modem-manager[445]: <info>  Loaded plugin 'X22X'
Nov 10 18:05:58 Salon modem-manager[445]: <info>  Loaded plugin 'Wavecom'
Nov 10 18:05:58 Salon modem-manager[445]: <info>  Loaded plugin 'Sierra'
Nov 10 18:05:58 Salon modem-manager[445]: <info>  Loaded plugin 'SimTech'
Nov 10 18:05:58 Salon modem-manager[445]: <info>  Loaded plugin 'AnyData'
Nov 10 18:05:58 Salon modem-manager[445]: <info>  Loaded plugin 'Huawei'
Nov 10 18:05:58 Salon modem-manager[445]: <info>  Loaded plugin 'MotoC'
Nov 10 18:05:58 Salon dbus[326]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Nov 10 18:05:58 Salon modem-manager[445]: <info>  Loaded plugin 'Gobi'
Nov 10 18:05:58 Salon modem-manager[445]: <info>  Loaded plugin 'Ericsson MBM'
Nov 10 18:05:58 Salon modem-manager[445]: <info>  Loaded plugin 'Option High-Speed'
Nov 10 18:05:58 Salon dbus[326]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 10 18:05:58 Salon modem-manager[445]: <info>  Loaded plugin 'Longcheer'
Nov 10 18:05:58 Salon modem-manager[445]: <info>  Loaded plugin 'ZTE'
Nov 10 18:05:58 Salon modem-manager[445]: <info>  Loaded plugin 'Cinterion'
Nov 10 18:05:58 Salon modem-manager[445]: <info>  Loaded plugin 'Via CBP7'
Nov 10 18:05:58 Salon modem-manager[445]: <info>  Loaded plugin 'Iridium'
Nov 10 18:05:58 Salon modem-manager[445]: <info>  Loaded plugin 'Generic'
Nov 10 18:05:58 Salon modem-manager[445]: <info>  Successfully loaded 21 plugins
Nov 10 18:05:58 Salon NetworkManager[432]: <info> WiFi enabled by radio killswitch; enabled by state file
Nov 10 18:05:58 Salon NetworkManager[432]: <info> WWAN enabled by radio killswitch; enabled by state file
Nov 10 18:05:58 Salon NetworkManager[432]: <info> WiMAX enabled by radio killswitch; enabled by state file
Nov 10 18:05:58 Salon NetworkManager[432]: <info> Networking is enabled by state file
Nov 10 18:05:58 Salon NetworkManager[432]: <warn> failed to allocate link cache: (-10) Operation not supported
Nov 10 18:05:58 Salon NetworkManager[432]: <info> (p10p1): carrier is OFF
Nov 10 18:05:58 Salon NetworkManager[432]: <info> (p10p1): new Ethernet device (driver: 'r8169' ifindex: 2)
Nov 10 18:05:58 Salon NetworkManager[432]: <info> (p10p1): exported as /org/freedesktop/NetworkManager/Devices/0
Nov 10 18:05:58 Salon NetworkManager[432]: <info> (p10p1): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Nov 10 18:05:58 Salon NetworkManager[432]: <info> (p10p1): bringing up device.
Nov 10 18:05:58 Salon dbus-daemon[326]: dbus[326]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Nov 10 18:05:58 Salon systemd[1]: Started Network Manager.
Nov 10 18:05:58 Salon systemd[1]: Starting Network.
Nov 10 18:05:58 Salon systemd[1]: Reached target Network.
Nov 10 18:05:58 Salon systemd[1]: Starting Virtualization daemon...
Nov 10 18:05:58 Salon systemd[1]: Started Virtualization daemon.
Nov 10 18:05:58 Salon systemd[1]: Starting /etc/rc.d/rc.local Compatibility...
Nov 10 18:05:58 Salon systemd[1]: Starting RPC bind service...
Nov 10 18:05:58 Salon systemd[1]: Started Login and scanning of iSCSI devices.
Nov 10 18:05:58 Salon systemd[1]: Started RPC bind service.
Nov 10 18:05:58 Salon dbus-daemon[326]: modem-manager[445]: <info>  Loaded plugin 'Gobi'
Nov 10 18:05:58 Salon dbus-daemon[326]: modem-manager[445]: <info>  Loaded plugin 'Ericsson MBM'
Nov 10 18:05:58 Salon dbus-daemon[326]: modem-manager[445]: <info>  Loaded plugin 'Option High-Speed'
Nov 10 18:05:58 Salon dbus-daemon[326]: modem-manager[445]: <info>  Loaded plugin 'Generic'
Nov 10 18:05:58 Salon dbus-daemon[326]: modem-manager[445]: <info>  Successfully loaded 21 plugins
Nov 10 18:05:58 Salon kernel: [   38.759660] r8169 0000:03:00.0 p10p1: link down
Nov 10 18:05:58 Salon kernel: [   38.759691] r8169 0000:03:00.0 p10p1: link down
Nov 10 18:05:58 Salon kernel: [   38.759700] IPv6: ADDRCONF(NETDEV_UP): p10p1: link is not ready
Nov 10 18:05:58 Salon NetworkManager[432]: <info> (p10p1): preparing device.
Nov 10 18:05:58 Salon NetworkManager[432]: <info> (p10p1): deactivating device (reason 'managed') [2]
Nov 10 18:05:58 Salon NetworkManager[432]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring...
Nov 10 18:05:58 Salon NetworkManager[432]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring...
Nov 10 18:05:58 Salon NetworkManager[432]: <info> modem-manager is now available
Nov 10 18:05:58 Salon systemd[1]: Started /etc/rc.d/rc.local Compatibility.
Nov 10 18:05:58 Salon systemd[1]: Starting Wait for Plymouth Boot Screen to Quit...
Nov 10 18:05:58 Salon systemd[1]: Started Wait for Plymouth Boot Screen to Quit.
Nov 10 18:05:58 Salon systemd[1]: Starting Multi-User System.
Nov 10 18:05:58 Salon systemd[1]: Reached target Multi-User System.
Nov 10 18:05:58 Salon systemd[1]: Starting Graphical Interface.
Nov 10 18:05:58 Salon systemd[1]: Reached target Graphical Interface.
Nov 10 18:05:58 Salon systemd[1]: Starting Stop Read-Ahead Data Collection 10s After Completed Startup.
Nov 10 18:05:58 Salon systemd[1]: Started Stop Read-Ahead Data Collection 10s After Completed Startup.
Nov 10 18:05:58 Salon systemd[1]: Starting Update UTMP about System Runlevel Changes...
Nov 10 18:05:58 Salon systemd[1]: Started Update UTMP about System Runlevel Changes.
Nov 10 18:05:58 Salon systemd[1]: Startup finished in 2.796s (kernel) + 33.044s (initrd) + 2.774s (userspace) = 38.614s.
Nov 10 18:05:58 Salon libvirtd[455]: libvirt version: 1.0.5.6, package: 3.fc19 (Fedora Project, 2013-10-06-19:11:31, buildvm-01.phx2.fedoraproject.org)
Nov 10 18:05:58 Salon libvirtd[455]: Module /usr/lib64/libvirt/connection-driver/libvirt_driver_xen.so not accessible
Nov 10 18:05:58 Salon libvirtd[455]: Module /usr/lib64/libvirt/connection-driver/libvirt_driver_libxl.so not accessible
Nov 10 18:05:58 Salon libvirtd[455]: Module /usr/lib64/libvirt/connection-driver/libvirt_driver_lxc.so not accessible
Nov 10 18:05:58 Salon libvirtd[455]: Module /usr/lib64/libvirt/connection-driver/libvirt_driver_uml.so not accessible
Nov 10 18:05:58 Salon systemd-logind[320]: New session c1 of user gdm.
Nov 10 18:05:58 Salon systemd-logind[320]: Linked /tmp/.X11-unix/X0 to /run/user/42/X11-display.
Nov 10 18:05:58 Salon libvirtd[455]: open("/var/run/libvirt/network/nwfilter.ltmp"): Aucun fichier ou dossier de ce type
Nov 10 18:05:58 Salon dbus-daemon[326]: dbus[326]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Nov 10 18:05:58 Salon dbus[326]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Nov 10 18:05:58 Salon systemd[1]: Starting Daemon for power management...
Nov 10 18:05:58 Salon dbus-daemon[326]: dbus[326]: [system] Successfully activated service 'org.freedesktop.UPower'
Nov 10 18:05:58 Salon dbus[326]: [system] Successfully activated service 'org.freedesktop.UPower'
Nov 10 18:05:58 Salon systemd[1]: Started Daemon for power management.
Nov 10 18:05:58 Salon dbus-daemon[326]: dbus[326]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service'
Nov 10 18:05:58 Salon dbus[326]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service'
Nov 10 18:05:58 Salon gnome-session[541]: Entering running state
Nov 10 18:05:58 Salon systemd[1]: Starting Manage, Install and Generate Color Profiles...
Nov 10 18:05:58 Salon colord: Using config file /etc/colord.conf
Nov 10 18:05:58 Salon colord: Using mapping database file /var/lib/colord/mapping.db
Nov 10 18:05:58 Salon colord: Using device database file /var/lib/colord/storage.db
Nov 10 18:05:58 Salon colord: loaded plugin libcd_plugin_camera.so
Nov 10 18:05:58 Salon colord: loaded plugin libcd_plugin_scanner.so
Nov 10 18:05:58 Salon colord: Daemon ready for requests
Nov 10 18:05:58 Salon dbus-daemon[326]: dbus[326]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Nov 10 18:05:58 Salon dbus[326]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Nov 10 18:05:58 Salon systemd[1]: Started Manage, Install and Generate Color Profiles.
Nov 10 18:05:58 Salon colord: Profile added: icc-955ffdfc2d370c411b62cbfc653ad7a5
Nov 10 18:05:58 Salon rtkit-daemon[321]: Successfully made thread 782 of process 782 (/usr/bin/pulseaudio) owned by '42' high priority at nice level -11.
Nov 10 18:05:58 Salon colord: Profile added: icc-ddb7166bfd69471e0d1fcce5552decca
Nov 10 18:05:58 Salon colord: Profile added: icc-401e3f1b41eddb1dd67f8036a6d23f9b
Nov 10 18:05:58 Salon colord: Profile added: icc-5b605be32b278d8e91dcdb94462ac27f
Nov 10 18:05:58 Salon colord: Profile added: icc-74f1646a87c428762276e5611bcbc272
Nov 10 18:05:58 Salon colord: Profile added: icc-0a91d97691639c980c16364f630f9c1f
Nov 10 18:05:58 Salon colord: Profile added: icc-83c9227cee43e657a58674804fe00278
Nov 10 18:05:59 Salon rtkit-daemon[321]: Successfully made thread 871 of process 871 (/usr/bin/pulseaudio) owned by '42' high priority at nice level -11.
Nov 10 18:05:59 Salon pulseaudio[871]: [pulseaudio] pid.c: Daemon already running.
Nov 10 18:05:59 Salon dbus-daemon[326]: dbus[326]: [system] Activating via systemd: service name='org.freedesktop.locale1' unit='dbus-org.freedesktop.locale1.service'
Nov 10 18:05:59 Salon dbus[326]: [system] Activating via systemd: service name='org.freedesktop.locale1' unit='dbus-org.freedesktop.locale1.service'
Nov 10 18:05:59 Salon systemd[1]: Starting Locale Service...
Nov 10 18:05:59 Salon dbus-daemon[326]: dbus[326]: [system] Successfully activated service 'org.freedesktop.locale1'
Nov 10 18:05:59 Salon dbus[326]: [system] Successfully activated service 'org.freedesktop.locale1'
Nov 10 18:05:59 Salon systemd[1]: Started Locale Service.
Nov 10 18:05:59 Salon colord: Device added: xrandr-Samsung Electric Company-SMB2430H-H9XZA05096
Nov 10 18:05:59 Salon colord: Automatic metadata add icc-bc8b0ef76d2e0f1658baff1556ba3b7e to xrandr-Samsung Electric Company-SMB2430H-H9XZA05096
Nov 10 18:05:59 Salon colord: Profile added: icc-bc8b0ef76d2e0f1658baff1556ba3b7e
Nov 10 18:05:59 Salon kernel: [   40.499614] r8169 0000:03:00.0 p10p1: link up
Nov 10 18:05:59 Salon kernel: [   40.499634] IPv6: ADDRCONF(NETDEV_CHANGE): p10p1: link becomes ready
Nov 10 18:05:59 Salon NetworkManager[432]: <info> (p10p1): carrier now ON (device state 20)
Nov 10 18:05:59 Salon NetworkManager[432]: <info> (p10p1): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40]
Nov 10 18:05:59 Salon NetworkManager[432]: <info> Auto-activating connection 'enp3s0'.
Nov 10 18:05:59 Salon NetworkManager[432]: <info> Activation (p10p1) starting connection 'enp3s0'
Nov 10 18:05:59 Salon NetworkManager[432]: <info> (p10p1): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Nov 10 18:05:59 Salon NetworkManager[432]: <info> NetworkManager state is now CONNECTING
Nov 10 18:05:59 Salon NetworkManager[432]: <info> Activation (p10p1) Stage 1 of 5 (Device Prepare) scheduled...
Nov 10 18:05:59 Salon NetworkManager[432]: <info> Activation (p10p1) Stage 1 of 5 (Device Prepare) started...
Nov 10 18:05:59 Salon NetworkManager[432]: <info> Activation (p10p1) Stage 2 of 5 (Device Configure) scheduled...
Nov 10 18:05:59 Salon NetworkManager[432]: <info> Activation (p10p1) Stage 1 of 5 (Device Prepare) complete.
Nov 10 18:05:59 Salon NetworkManager[432]: <info> Activation (p10p1) Stage 2 of 5 (Device Configure) starting...
Nov 10 18:05:59 Salon NetworkManager[432]: <info> (p10p1): device state change: prepare -> config (reason 'none') [40 50 0]
Nov 10 18:05:59 Salon NetworkManager[432]: <info> Activation (p10p1) Stage 2 of 5 (Device Configure) successful.
Nov 10 18:05:59 Salon NetworkManager[432]: <info> Activation (p10p1) Stage 2 of 5 (Device Configure) complete.
Nov 10 18:05:59 Salon gnome-session[541]: JS LOG: GNOME Shell started at Sun Nov 10 2013 18:05:59 GMT+0100 (CET)
Nov 10 18:06:00 Salon NetworkManager[432]: <info> Activation (p10p1) Stage 3 of 5 (IP Configure Start) scheduled.
Nov 10 18:06:00 Salon NetworkManager[432]: <info> Activation (p10p1) Stage 3 of 5 (IP Configure Start) started...
Nov 10 18:06:00 Salon NetworkManager[432]: <info> (p10p1): device state change: config -> ip-config (reason 'none') [50 70 0]
Nov 10 18:06:00 Salon NetworkManager[432]: <info> Activation (p10p1) Beginning DHCPv4 transaction (timeout in 45 seconds)
Nov 10 18:06:00 Salon NetworkManager[432]: <info> dhclient started with pid 1090
Nov 10 18:06:00 Salon NetworkManager[432]: <info> Activation (p10p1) Stage 3 of 5 (IP Configure Start) complete.
Nov 10 18:06:00 Salon dbus-daemon[326]: dbus[326]: [system] Activating via systemd: service name='net.reactivated.Fprint' unit='fprintd.service'
Nov 10 18:06:00 Salon dbus[326]: [system] Activating via systemd: service name='net.reactivated.Fprint' unit='fprintd.service'
Nov 10 18:06:00 Salon systemd[1]: Starting Fingerprint Authentication Daemon...
Nov 10 18:06:00 Salon dbus-daemon[326]: dbus[326]: [system] Successfully activated service 'net.reactivated.Fprint'
Nov 10 18:06:00 Salon dbus[326]: [system] Successfully activated service 'net.reactivated.Fprint'
Nov 10 18:06:00 Salon systemd[1]: Started Fingerprint Authentication Daemon.
Nov 10 18:06:00 Salon fprintd[1092]: Launching FprintObject
Nov 10 18:06:00 Salon fprintd[1092]: ** Message: D-Bus service launched with name: net.reactivated.Fprint
Nov 10 18:06:00 Salon fprintd[1092]: ** Message: entering main loop
Nov 10 18:06:00 Salon dhclient[1090]: Internet Systems Consortium DHCP Client 4.2.5
Nov 10 18:06:00 Salon dhclient[1090]: Copyright 2004-2013 Internet Systems Consortium.
Nov 10 18:06:00 Salon dhclient[1090]: All rights reserved.
Nov 10 18:06:00 Salon dhclient[1090]: For info, please visit https://www.isc.org/software/dhcp/
Nov 10 18:06:00 Salon dhclient[1090]: 
Nov 10 18:06:00 Salon NetworkManager[432]: <info> (p10p1): DHCPv4 state changed nbi -> preinit
Nov 10 18:06:00 Salon dhclient[1090]: Listening on LPF/p10p1/bc:ae:c5:e5:d1:48
Nov 10 18:06:00 Salon dhclient[1090]: Sending on   LPF/p10p1/bc:ae:c5:e5:d1:48
Nov 10 18:06:00 Salon dhclient[1090]: Sending on   Socket/fallback
Nov 10 18:06:00 Salon dhclient[1090]: DHCPREQUEST on p10p1 to 255.255.255.255 port 67 (xid=0x1f9e0b24)
Nov 10 18:06:00 Salon dhclient[1090]: DHCPACK from 192.168.0.1 (xid=0x1f9e0b24)
Nov 10 18:06:00 Salon dhclient[1090]: bound to 192.168.0.73 -- renewal in 560897 seconds.
Nov 10 18:06:00 Salon NetworkManager[432]: <info> (p10p1): DHCPv4 state changed preinit -> reboot
Nov 10 18:06:00 Salon NetworkManager[432]: <info>   address 192.168.0.73
Nov 10 18:06:00 Salon NetworkManager[432]: <info>   prefix 24 (255.255.255.0)
Nov 10 18:06:00 Salon NetworkManager[432]: <info>   gateway 192.168.0.1
Nov 10 18:06:00 Salon NetworkManager[432]: <info>   nameserver '192.168.1.1'
Nov 10 18:06:00 Salon NetworkManager[432]: <info>   nameserver '192.168.0.1'
Nov 10 18:06:00 Salon NetworkManager[432]: <info> Activation (p10p1) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
Nov 10 18:06:00 Salon NetworkManager[432]: <info> Activation (p10p1) Stage 5 of 5 (IPv4 Commit) started...
Nov 10 18:06:00 Salon avahi-daemon[322]: Joining mDNS multicast group on interface p10p1.IPv4 with address 192.168.0.73.
Nov 10 18:06:00 Salon avahi-daemon[322]: New relevant interface p10p1.IPv4 for mDNS.
Nov 10 18:06:00 Salon avahi-daemon[322]: Registering new address record for 192.168.0.73 on p10p1.IPv4.
Nov 10 18:06:00 Salon gnome-session[541]: Avertissement du gestionnaire de fenêtres : CurrentTime used to choose focus window; focus window may not be correct.
Nov 10 18:06:00 Salon gnome-session[541]: Avertissement du gestionnaire de fenêtres : Got a request to focus the no_focus_window with a timestamp of 0.  This shouldn't happen!
Nov 10 18:06:01 Salon NetworkManager[432]: <info> (p10p1): device state change: ip-config -> secondaries (reason 'none') [70 90 0]
Nov 10 18:06:01 Salon NetworkManager[432]: <info> Activation (p10p1) Stage 5 of 5 (IPv4 Commit) complete.
Nov 10 18:06:01 Salon NetworkManager[432]: <info> (p10p1): device state change: secondaries -> activated (reason 'none') [90 100 0]
Nov 10 18:06:01 Salon NetworkManager[432]: <info> NetworkManager state is now CONNECTED_GLOBAL
Nov 10 18:06:01 Salon NetworkManager[432]: <info> Policy set 'enp3s0' (p10p1) as default for IPv4 routing and DNS.
Nov 10 18:06:01 Salon NetworkManager[432]: <info> Activation (p10p1) successful, device activated.
Nov 10 18:06:01 Salon dbus-daemon[326]: dbus[326]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
Nov 10 18:06:01 Salon dbus[326]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
Nov 10 18:06:01 Salon systemd[1]: Starting Network Manager Script Dispatcher Service...
Nov 10 18:06:01 Salon dbus-daemon[326]: dbus[326]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Nov 10 18:06:01 Salon dbus[326]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Nov 10 18:06:01 Salon systemd[1]: Started Network Manager Script Dispatcher Service.
Nov 10 18:06:01 Salon avahi-daemon[322]: Registering new address record for fe80::beae:c5ff:fee5:d148 on p10p1.*.
Nov 10 18:06:04 Salon systemd-logind[320]: New session 1 of user PapsOu.
Nov 10 18:06:04 Salon systemd-logind[320]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
Nov 10 18:06:04 Salon gnome-session[541]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Nov 10 18:06:04 Salon gnome-session[541]: (gnome-settings-daemon:601): GLib-GIO-WARNING **: Error releasing name org.gnome.SettingsDaemon: La connexion est fermée
Nov 10 18:06:04 Salon gnome-session[541]: (gnome-settings-daemon:601): GLib-GIO-WARNING **: Error releasing name org.gnome.SettingsDaemon.Power: La connexion est fermée
Nov 10 18:06:04 Salon gnome-session[541]: (gnome-settings-daemon:601): GLib-GIO-WARNING **: Error releasing name org.gnome.SettingsDaemon.XRANDR: La connexion est fermée
Nov 10 18:06:04 Salon gnome-session[541]: (gnome-settings-daemon:601): GLib-GIO-WARNING **: Error releasing name org.gnome.SettingsDaemon.Keyboard: La connexion est fermée
Nov 10 18:06:04 Salon colord: device removed: xrandr-Samsung Electric Company-SMB2430H-H9XZA05096
Nov 10 18:06:04 Salon colord: Profile removed: icc-bc8b0ef76d2e0f1658baff1556ba3b7e
Nov 10 18:06:04 Salon gdm[343]: Child process -541 was already dead.
Nov 10 18:06:04 Salon kernel: [   45.460915] fuse init (API version 7.22)
Nov 10 18:06:04 Salon systemd[1]: Mounting FUSE Control File System...
Nov 10 18:06:04 Salon systemd[1]: Mounted FUSE Control File System.
Nov 10 18:06:04 Salon gnome-session[1190]: GNOME_KEYRING_CONTROL=/run/user/1000/keyring-GngkNj
Nov 10 18:06:04 Salon gnome-session[1190]: SSH_AUTH_SOCK=/run/user/1000/keyring-GngkNj/ssh
Nov 10 18:06:04 Salon gnome-session[1190]: GPG_AGENT_INFO=/run/user/1000/keyring-GngkNj/gpg:0:1
Nov 10 18:06:04 Salon gnome-session[1190]: GNOME_KEYRING_CONTROL=/run/user/1000/keyring-GngkNj
Nov 10 18:06:04 Salon gnome-session[1190]: GNOME_KEYRING_CONTROL=/run/user/1000/keyring-GngkNj
Nov 10 18:06:04 Salon gnome-session[1190]: SSH_AUTH_SOCK=/run/user/1000/keyring-GngkNj/ssh
Nov 10 18:06:04 Salon gnome-session[1190]: GNOME_KEYRING_CONTROL=/run/user/1000/keyring-GngkNj
Nov 10 18:06:04 Salon gnome-session[1190]: SSH_AUTH_SOCK=/run/user/1000/keyring-GngkNj/ssh
Nov 10 18:06:04 Salon gnome-session[1190]: GPG_AGENT_INFO=/run/user/1000/keyring-GngkNj/gpg:0:1
Nov 10 18:06:04 Salon rtkit-daemon[321]: Successfully made thread 1268 of process 1268 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Nov 10 18:06:05 Salon dbus-daemon[326]: dbus[326]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service'
Nov 10 18:06:05 Salon dbus[326]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service'
Nov 10 18:06:05 Salon systemd[1]: Starting Disk Manager...
Nov 10 18:06:05 Salon udisksd[1285]: udisks daemon version 2.1.0 starting
Nov 10 18:06:05 Salon dbus-daemon[326]: dbus[326]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Nov 10 18:06:05 Salon dbus[326]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Nov 10 18:06:05 Salon dbus[326]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 10 18:06:05 Salon dbus-daemon[326]: dbus[326]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 10 18:06:05 Salon pulseaudio[1268]: [pulseaudio] bluetooth-util.c: org.bluez.Manager.GetProperties() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 10 18:06:06 Salon chronyd[315]: Selected source 78.194.78.49
Nov 10 18:06:06 Salon chronyd[315]: System clock wrong by -0.556963 seconds, adjustment started
Nov 10 18:06:24 Salon systemd-logind[320]: Removed session c1.
Nov 10 18:06:27 Salon systemd-udevd[225]: timeout 'ata_id --export /dev/sr0'
Nov 10 18:06:27 Salon kernel: [   68.511835] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Nov 10 18:06:27 Salon kernel: [   68.511850] ata1.00: failed command: IDENTIFY PACKET DEVICE
Nov 10 18:06:27 Salon kernel: [   68.511865] ata1.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
Nov 10 18:06:27 Salon kernel: [   68.511865]          res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
Nov 10 18:06:27 Salon kernel: [   68.511873] ata1.00: status: { DRDY }
Nov 10 18:06:27 Salon kernel: [   68.511882] ata1: hard resetting link
Nov 10 18:06:27 Salon kernel: [   68.972456] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Nov 10 18:06:28 Salon systemd-udevd[225]: timeout: killing 'ata_id --export /dev/sr0' [285]
Nov 10 18:06:28 Salon systemd[1]: Starting Stop Read-Ahead Data Collection...
Nov 10 18:06:28 Salon systemd[1]: Started Stop Read-Ahead Data Collection.
Nov 10 18:06:28 Salon kernel: [   69.776292] ata1.00: configured for PIO4
Nov 10 18:06:28 Salon systemd-udevd[203]: worker [225] /devices/pci0000:00/0000:00:11.0/ata1/host0/target0:0:0/0:0:0:0/block/sr0 timeout; kill it
Nov 10 18:06:28 Salon systemd-udevd[203]: seq 1652 '/devices/pci0000:00/0000:00:11.0/ata1/host0/target0:0:0/0:0:0:0/block/sr0' killed
Nov 10 18:06:28 Salon systemd-udevd[203]: worker [225] terminated by signal 9 (Killed)
Nov 10 18:06:29 Salon kernel: [   70.577943] ata1: EH complete
Nov 10 18:06:29 Salon dbus-daemon[326]: dbus[326]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Nov 10 18:06:29 Salon dbus[326]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Nov 10 18:06:29 Salon udisksd[1285]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Nov 10 18:06:29 Salon systemd[1]: Started Disk Manager.
Nov 10 18:06:29 Salon goa[1322]: goa-daemon version 3.8.4.1 starting [main.c:113, main()]
Nov 10 18:06:29 Salon dbus-daemon[326]: dbus[326]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Nov 10 18:06:29 Salon dbus[326]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Nov 10 18:06:29 Salon dbus-daemon[326]: dbus[326]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Nov 10 18:06:29 Salon dbus[326]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Nov 10 18:06:29 Salon systemd[1]: Starting CUPS Printing Service...
Nov 10 18:06:29 Salon systemd[1]: Started CUPS Printing Service.
Nov 10 18:06:29 Salon colord: Device added: xrandr-Samsung Electric Company-SMB2430H-H9XZA05096
Nov 10 18:06:29 Salon colord: Automatic metadata add icc-ab4c37e21e45150eed5a4e63a92502d8 to xrandr-Samsung Electric Company-SMB2430H-H9XZA05096
Nov 10 18:06:29 Salon colord: Profile added: icc-ab4c37e21e45150eed5a4e63a92502d8
Nov 10 18:06:30 Salon fprintd[1092]: ** Message: No devices in use, exit
Nov 10 18:06:30 Salon gnome-session[1190]: vmware-user: could not open /proc/fs/vmblock/dev
Nov 10 18:06:30 Salon gnome-session[1190]: Tracker-Message: Importing config file to GSettings
Nov 10 18:06:30 Salon gnome-session[1190]: Tracker-Message: Importing config file to GSettings
Nov 10 18:06:30 Salon vmusr[1419]: [ warning] [vmtoolsd] The vmusr service needs to run inside a virtual machine.
Nov 10 18:06:30 Salon gnome-session[1190]: Entering running state
Nov 10 18:06:30 Salon gnome-session[1190]: JS LOG: GNOME Shell started at Sun Nov 10 2013 18:06:30 GMT+0100 (CET)
Nov 10 18:06:30 Salon gnome-session[1190]: Tracker-Message: Importing config file to GSettings
Nov 10 18:06:30 Salon gnome-session[1190]: Failed to play sound: File or data not found
Nov 10 18:06:30 Salon gnome-session[1190]: Avertissement du gestionnaire de fenêtres : Log level 16: STACK_OP_ADD: window 0x1a00001 already in stack
Nov 10 18:06:30 Salon gnome-session[1190]: Avertissement du gestionnaire de fenêtres : Log level 16: STACK_OP_ADD: window 0x1a00001 already in stack
Nov 10 18:06:30 Salon gnome-session[1190]: Avertissement du gestionnaire de fenêtres : CurrentTime used to choose focus window; focus window may not be correct.
Nov 10 18:06:30 Salon gnome-session[1190]: Avertissement du gestionnaire de fenêtres : Got a request to focus the no_focus_window with a timestamp of 0.  This shouldn't happen!
Nov 10 18:06:31 Salon gnome-session[1190]: (tracker-miner-fs:1413): GLib-CRITICAL **: g_timer_continue: assertion `timer->active == FALSE' failed
Nov 10 18:07:12 Salon chronyd[315]: Selected source 88.191.120.99
Nov 10 18:07:59 Salon gnome-session[1190]: (process:1566): GLib-CRITICAL **: g_slice_set_config: assertion `sys_page_size == 0' failed
Nov 10 18:08:15 Salon gnome-session[1190]: Avertissement du gestionnaire de fenêtres : CurrentTime used to choose focus window; focus window may not be correct.
Nov 10 18:08:15 Salon gnome-session[1190]: Avertissement du gestionnaire de fenêtres : Got a request to focus the no_focus_window with a timestamp of 0.  This shouldn't happen!
Nov 10 18:09:30 Salon kernel: [  251.955492] usb 2-5: new high-speed USB device number 2 using ehci-pci
Nov 10 18:09:30 Salon gnome-session[1190]: Avertissement du gestionnaire de fenêtres : CurrentTime used to choose focus window; focus window may not be correct.
Nov 10 18:09:30 Salon gnome-session[1190]: Avertissement du gestionnaire de fenêtres : Got a request to focus the no_focus_window with a timestamp of 0.  This shouldn't happen!
Nov 10 18:09:30 Salon kernel: [  252.072127] usb 2-5: New USB device found, idVendor=067b, idProduct=2506
Nov 10 18:09:30 Salon kernel: [  252.072140] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 10 18:09:30 Salon kernel: [  252.072148] usb 2-5: Product: Mass Storage Device
Nov 10 18:09:30 Salon kernel: [  252.072154] usb 2-5: Manufacturer: Prolific Technology Inc.
Nov 10 18:09:30 Salon kernel: [  252.072159] usb 2-5: SerialNumber: 0
Nov 10 18:09:30 Salon mtp-probe: checking bus 2, device 2: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-5"
Nov 10 18:09:30 Salon mtp-probe: bus: 2, device: 2 was not an MTP device
Nov 10 18:09:30 Salon kernel: [  252.113956] usb-storage 2-5:1.0: USB Mass Storage device detected
Nov 10 18:09:30 Salon kernel: [  252.115225] scsi6 : usb-storage 2-5:1.0
Nov 10 18:09:30 Salon kernel: [  252.115446] usbcore: registered new interface driver usb-storage
Nov 10 18:09:31 Salon kernel: [  253.153747] scsi 6:0:0:0: Direct-Access     IC25N060 ATMR04-0         MO3O PQ: 0 ANSI: 0
Nov 10 18:09:31 Salon kernel: [  253.155597] sd 6:0:0:0: [sdc] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
Nov 10 18:09:31 Salon kernel: [  253.156579] sd 6:0:0:0: Attached scsi generic sg3 type 0
Nov 10 18:09:31 Salon kernel: [  253.156703] sd 6:0:0:0: [sdc] Write Protect is off
Nov 10 18:09:31 Salon kernel: [  253.157954] sd 6:0:0:0: [sdc] No Caching mode page found
Nov 10 18:09:31 Salon kernel: [  253.157963] sd 6:0:0:0: [sdc] Assuming drive cache: write through
Nov 10 18:09:31 Salon kernel: [  253.163319] sd 6:0:0:0: [sdc] No Caching mode page found
Nov 10 18:09:31 Salon kernel: [  253.163331] sd 6:0:0:0: [sdc] Assuming drive cache: write through
Nov 10 18:09:31 Salon kernel: [  253.478154]  sdc: sdc1
Nov 10 18:09:31 Salon kernel: [  253.482240] sd 6:0:0:0: [sdc] No Caching mode page found
Nov 10 18:09:31 Salon kernel: [  253.482253] sd 6:0:0:0: [sdc] Assuming drive cache: write through
Nov 10 18:09:31 Salon kernel: [  253.482261] sd 6:0:0:0: [sdc] Attached SCSI disk
Nov 10 18:09:32 Salon kernel: [  253.917105] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
Nov 10 18:09:32 Salon udisksd[1285]: Mounted /dev/sdc1 at /run/media/PapsOu/BBZ-BackUp on behalf of uid 1000
Nov 10 18:09:35 Salon dbus-daemon[326]: dbus[326]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service'
Nov 10 18:09:35 Salon dbus[326]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service'
Nov 10 18:09:35 Salon systemd[1]: Starting Hostname Service...
Nov 10 18:09:35 Salon dbus-daemon[326]: dbus[326]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 10 18:09:35 Salon dbus[326]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 10 18:09:35 Salon systemd[1]: Started Hostname Service.
Nov 10 18:10:29 Salon gnome-session[1190]: (process:1710): GLib-CRITICAL **: g_slice_set_config: assertion `sys_page_size == 0' failed
Nov 10 18:11:16 Salon gnome-session[1190]: (process:1710): GLib-CRITICAL **: g_slice_set_config: assertion `sys_page_size == 0' failed
Nov 10 18:11:33 Salon gnome-session[1190]: ATTENTION: default value of option force_s3tc_enable overridden by environment.
Nov 10 18:13:23 Salon gnome-session[1190]: (firefox:1710): Gtk-CRITICAL **: IA__gtk_clipboard_set_with_data: assertion `targets != NULL' failed
Nov 10 18:20:19 Salon systemd[1]: Starting Cleanup of Temporary Directories...
Nov 10 18:20:19 Salon systemd[1]: Started Cleanup of Temporary Directories.
Nov 10 18:22:58 Salon dbus-daemon[326]: dbus[326]: [system] Activating via systemd: service name='net.reactivated.Fprint' unit='fprintd.service'
Nov 10 18:22:58 Salon dbus[326]: [system] Activating via systemd: service name='net.reactivated.Fprint' unit='fprintd.service'
Nov 10 18:22:58 Salon systemd[1]: Starting Fingerprint Authentication Daemon...
Nov 10 18:22:58 Salon dbus-daemon[326]: dbus[326]: [system] Successfully activated service 'net.reactivated.Fprint'
Nov 10 18:22:58 Salon dbus[326]: [system] Successfully activated service 'net.reactivated.Fprint'
Nov 10 18:22:58 Salon systemd[1]: Started Fingerprint Authentication Daemon.
Nov 10 18:22:58 Salon fprintd[2163]: Launching FprintObject
Nov 10 18:22:58 Salon fprintd[2163]: ** Message: D-Bus service launched with name: net.reactivated.Fprint
Nov 10 18:22:58 Salon fprintd[2163]: ** Message: entering main loop
Nov 10 18:22:59 Salon su: (to root) PapsOu on pts/0
Nov 10 18:23:28 Salon fprintd[2163]: ** Message: No devices in use, exit
Nov 10 18:24:41 Salon dbus-daemon[326]: dbus[326]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Nov 10 18:24:41 Salon dbus[326]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Nov 10 18:24:41 Salon dbus-daemon[326]: dbus[326]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Nov 10 18:24:41 Salon dbus[326]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Nov 10 18:29:22 Salon systemd[1]: Reloading.
Nov 10 18:30:36 Salon dbus-daemon[326]: dbus[326]: [system] Activating via systemd: service name='net.reactivated.Fprint' unit='fprintd.service'
Nov 10 18:30:36 Salon dbus[326]: [system] Activating via systemd: service name='net.reactivated.Fprint' unit='fprintd.service'
Nov 10 18:30:36 Salon systemd[1]: Starting Fingerprint Authentication Daemon...
Nov 10 18:30:36 Salon dbus-daemon[326]: dbus[326]: [system] Successfully activated service 'net.reactivated.Fprint'
Nov 10 18:30:36 Salon dbus[326]: [system] Successfully activated service 'net.reactivated.Fprint'
Nov 10 18:30:36 Salon systemd[1]: Started Fingerprint Authentication Daemon.
Nov 10 18:30:36 Salon fprintd[2734]: Launching FprintObject
Nov 10 18:30:36 Salon fprintd[2734]: ** Message: D-Bus service launched with name: net.reactivated.Fprint
Nov 10 18:30:36 Salon fprintd[2734]: ** Message: entering main loop
Nov 10 18:30:37 Salon su: (to root) PapsOu on pts/0
Nov 10 18:31:06 Salon fprintd[2734]: ** Message: No devices in use, exit

Voila, je ne sais pas si le fait d'avoir un /home séparé (sur un HDD classique) et  tout le reste sur un SSD pose problème.

Je précise que j'ai suivi la doc sur les SSD sans problème.

PS : peut être que ça peut aider :

# systemctl status udisks2.service
udisks2.service - Disk Manager
   Loaded: loaded (/usr/lib/systemd/system/udisks2.service; static)
   Active: active (running) since dim. 2013-11-10 18:06:29 CET; 32min ago
     Docs: man:udisks(8)
 Main PID: 1285 (udisksd)
   CGroup: name=systemd:/system/udisks2.service
           └─1285 /usr/lib/udisks2/udisksd --no-debug

nov. 10 18:06:05 Salon systemd[1]: Starting Disk Manager...
nov. 10 18:06:05 Salon udisksd[1285]: udisks daemon version 2.1.0 starting
nov. 10 18:06:29 Salon udisksd[1285]: Acquired the name org.freedesktop.UDisks2 on the system message bus
nov. 10 18:06:29 Salon systemd[1]: Started Disk Manager.
nov. 10 18:09:32 Salon udisksd[1285]: Mounted /dev/sdc1 at /run/media/PapsOu/BBZ-BackUp on behalf of uid 1000

Si besoin de + d'info, demandez ;)

Merci d'avance pour votre aide

Dernière modification par PapsOu (10/11/2013 19:42:16)

Hors ligne

#2 10/11/2013 20:46:39

chepioq
FEDORA FOR EVER
Lieu : a l'est de marseille
Inscription : 07/06/2006
Messages : 7 350

Re : [Résolu] Démarrage lent SSD + HDD

J'ai un ssd samsung 840 pro de 256Go, sur lequel est installé l'intégralité de ma fedora :

[dominique@host ~]$ systemd-analyze blame
           602ms dkms_autoinstaller.service
           548ms systemd-fsck@dev-disk-by\x2duuid-22c530ab\x2db83f\x2d4d9b\x2d9cc4\x2dfce609a547eb.service
           479ms akmods.service
           361ms vboxdrv.service
           329ms plymouth-start.service
           189ms NetworkManager.service
           149ms accounts-daemon.service
           118ms avahi-daemon.service
            97ms systemd-fsck@dev-disk-by\x2duuid-c4ae54da\x2d89fd\x2d409d\x2d8b1a\x2df56dd83b3f40.service
            69ms systemd-vconsole-setup.service
            55ms colord.service
            52ms systemd-tmpfiles-clean.service
            49ms systemd-fsck-root.service
            48ms udisks2.service
            44ms systemd-logind.service
            38ms lm_sensors.service
            36ms dev-disk-by\x2duuid-b70abe30\x2d94cc\x2d4886\x2da85b\x2dc1418d7f02b5.swap
            32ms systemd-binfmt.service
            32ms systemd-udev-trigger.service
            30ms mcelog.service
            28ms rtkit-daemon.service
            27ms systemd-tmpfiles-setup-dev.service
            23ms proc-sys-fs-binfmt_misc.mount
            22ms chronyd.service
            21ms polkit.service
            18ms dev-hugepages.mount
            18ms vboxautostart-service.service
            18ms sys-kernel-debug.mount
            17ms dev-mqueue.mount
            16ms systemd-user-sessions.service
            13ms vboxweb-service.service
            13ms tmp.mount
            12ms plymouth-read-write.service
            11ms vboxballoonctrl-service.service
             9ms auditd.service
             9ms systemd-tmpfiles-setup.service
             8ms NetworkManager-dispatcher.service
             8ms systemd-sysctl.service
             7ms systemd-readahead-replay.service
             7ms sys-kernel-config.mount
             6ms systemd-journal-flush.service
             6ms systemd-readahead-collect.service
             6ms boot.mount
             5ms home.mount
             5ms upower.service
             4ms systemd-udevd.service
             3ms systemd-remount-fs.service
             2ms systemd-update-utmp-runlevel.service
             1ms systemd-random-seed-load.service
             1ms systemd-readahead-done.service

Chez moi udisks2.service ne prend que 48ms, alors en effet je pense qu'il y a un problème.

Mais je ne saurais pas trop te dire lequel.

Dernière modification par chepioq (10/11/2013 20:47:04)


Tout est dans tout... et réciproquement...
C'est quoi un chalumeau??? C'est un dromaludaire à deux bosses...
Quand le sage montre la lune l'imbécile regarde le doigt...
1277887812.gif

Hors ligne

#3 10/11/2013 21:20:09

chepioq
FEDORA FOR EVER
Lieu : a l'est de marseille
Inscription : 07/06/2006
Messages : 7 350

Re : [Résolu] Démarrage lent SSD + HDD

Que renvoie la commande :

udisks --dump

Tout est dans tout... et réciproquement...
C'est quoi un chalumeau??? C'est un dromaludaire à deux bosses...
Quand le sage montre la lune l'imbécile regarde le doigt...
1277887812.gif

Hors ligne

#4 10/11/2013 22:26:05

elbelo69
Membre
Lieu : Lyon
Inscription : 03/09/2007
Messages : 358

Re : [Résolu] Démarrage lent SSD + HDD

Bonjour,

Tu as 2 port SATA indépendant ?
Ton VG est sur les deux disques ou un VG par disque ?

Hors ligne

#5 12/11/2013 09:43:53

PapsOu
Developpeur PHP7 Symfony3
Rédacteur Wiki
Lieu : Quimper
Inscription : 27/11/2009
Messages : 1 849
Site Web

Re : [Résolu] Démarrage lent SSD + HDD

@chepioq :

$ udisks --dump
bash: udisks: commande inconnue...

Pas de bol en effet.

Mon partitionnement actuel est le suivant :

# fdisk -l

Disque /dev/sda : 500.1 Go, 500107862016 octets, 976773168 secteurs
Unités = secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0xd334d334

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sda1            2048   976773119   488385536   83  Linux

Disque /dev/sdb : 128.0 Go, 128035676160 octets, 250069680 secteurs
Unités = secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0x00027434

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sdb1            2048     4098047     2048000   83  Linux
/dev/sdb2         4098048   241666047   118784000   83  Linux
/dev/sdb3       241666048   250068991     4201472   82  Linux swap / Solaris

@elbelo69 : J'ai deux port sata indépendants (à priori) : J'ai essayé plusieurs configurations :
- SSD + Lecteur DVD sur la même nappe, puis HHD sur l'autre => pareil
- SSD sur une nape, le HDD et le DVD sur l'autre => pareil
- SSD et HDD sur la meme nappe + DVD sur l'autre => pareil

Et j'utilise pas LVM, danc pas de volum group. Mais le système de fichiers est bien partagé entre les deux disques (juste /home sur le HDD).

Je précise que pour l'installation, j'ai été obligé de passer par GParted pour être sur que mes partitions soient sur les bon disques. J'ai créé le partitionnement avant de lancer anaconda car il n'y avait pas le choix du disque physique lors de l'ajout de spoints de montages dans le partitionnement personnalisé.

Dernière modification par PapsOu (12/11/2013 09:46:47)

Hors ligne

#6 12/11/2013 09:46:18

PapsOu
Developpeur PHP7 Symfony3
Rédacteur Wiki
Lieu : Quimper
Inscription : 27/11/2009
Messages : 1 849
Site Web

Re : [Résolu] Démarrage lent SSD + HDD

PapsOu a écrit :

@chepioq :

$ udisks --dump
bash: udisks: commande inconnue...

Pas de bol en effet.

Mon partitionnement actuel est le suivant :

# fdisk -l

Disque /dev/sda : 500.1 Go, 500107862016 octets, 976773168 secteurs
Unités = secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0xd334d334

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sda1            2048   976773119   488385536   83  Linux

Disque /dev/sdb : 128.0 Go, 128035676160 octets, 250069680 secteurs
Unités = secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0x00027434

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sdb1            2048     4098047     2048000   83  Linux
/dev/sdb2         4098048   241666047   118784000   83  Linux
/dev/sdb3       241666048   250068991     4201472   82  Linux swap / Solaris

@elbelo69 : J'ai deux port sata indépendants (à priori) : J'ai essayé plusieurs configurations :
- SSD + Lecteur DVD sur la même nappe, puis HHD sur l'autre => pareil
- SSD sur une nape, le HDD et le DVD sur l'autre => pareil
- SSD et HDD sur la meme nappe + DVD sur l'autre => pareil

Et j'utilise pas LVM, danc pas de volum group. Mais le système de fichiers est bien partagé entre les deux disques (juste /home sur le HDD).

Je précise que pour l'installation, j'ai été obligé de passer par GParted pour être sur que mes partitions soient sur les bon disques. J'ai créé le partitionnement avant de lancer anaconda car il n'y avait pas le choix du disque physique lors de l'ajout de spoints de montages dans le partitionnement personnalisé.

[edit]
Chose étonnante (peut être pas importante), lors de l'install, le SSD été repéré comme sda, non sdb comme actuellement....

Hors ligne

#7 12/11/2013 09:57:24

remi
Crazy PHP packages monkey... !
Rédacteur Wiki
Lieu : Champagne...
Inscription : 16/10/2004
Messages : 5 578
Site Web

Re : [Résolu] Démarrage lent SSD + HDD

Aucun problème non plus (1 SSD, 2 DD, mais tout en LVM)

Le rapport smartctl sur les disques ?

Hors ligne

#8 12/11/2013 10:03:52

PapsOu
Developpeur PHP7 Symfony3
Rédacteur Wiki
Lieu : Quimper
Inscription : 27/11/2009
Messages : 1 849
Site Web

Re : [Résolu] Démarrage lent SSD + HDD

Pour le SSD :

# smartctl /dev/sdb -a
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.11.7-200.fc19.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Samsung based SSDs
Device Model:     Samsung SSD 840 PRO Series
Serial Number:    S1ANNEAD910196F
LU WWN Device Id: 5 002538 550407f9c
Firmware Version: DXM05B0Q
User Capacity:    128 035 676 160 bytes [128 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Tue Nov 12 09:02:59 2013 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x53) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  15) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       10
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       6
177 Wear_Leveling_Count     0x0013   100   100   000    Pre-fail  Always       -       0
179 Used_Rsvd_Blk_Cnt_Tot   0x0013   100   100   010    Pre-fail  Always       -       0
181 Program_Fail_Cnt_Total  0x0032   100   100   010    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0032   100   100   010    Old_age   Always       -       0
183 Runtime_Bad_Block       0x0013   100   100   010    Pre-fail  Always       -       0
187 Uncorrectable_Error_Cnt 0x0032   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0032   075   069   000    Old_age   Always       -       25
195 ECC_Error_Rate          0x001a   200   200   000    Old_age   Always       -       0
199 CRC_Error_Count         0x003e   100   100   000    Old_age   Always       -       0
235 POR_Recovery_Count      0x0012   100   100   000    Old_age   Always       -       0
241 Total_LBAs_Written      0x0032   099   099   000    Old_age   Always       -       21101672

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
  255        0    65535  Read_scanning was never started
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

et pour le HDD :

# smartctl /dev/sda -a
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.11.7-200.fc19.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar Blue (SATA 6Gb/s)
Device Model:     WDC WD5000AAKX-001CA0
Serial Number:    WD-WCAYUE373475
LU WWN Device Id: 5 0014ee 1ae4ef56a
Firmware Version: 15.01H15
User Capacity:    500 107 862 016 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Tue Nov 12 09:03:27 2013 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		( 8700) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  88) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x3037)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   135   132   021    Pre-fail  Always       -       4241
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1150
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       3590
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1145
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       32
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       1117
194 Temperature_Celsius     0x0022   113   101   000    Old_age   Always       -       30
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 2
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2 occurred at disk power-on lifetime: 52 hours (2 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 51 01 30 4f c2 e0  Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  b0 d6 01 be 4f c2 e0 00      01:49:22.437  SMART WRITE LOG
  b0 da 01 00 4f c2 e0 00      01:49:22.376  SMART RETURN STATUS
  80 44 00 00 44 57 e0 00      01:49:22.376  [VENDOR SPECIFIC]
  b0 d6 01 be 4f c2 e0 00      01:49:22.348  SMART WRITE LOG
  80 45 00 00 44 57 e0 00      01:49:22.348  [VENDOR SPECIFIC]

Error 1 occurred at disk power-on lifetime: 52 hours (2 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 51 01 30 4f c2 a0  Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  b0 d6 01 be 4f c2 a0 00      01:46:05.989  SMART WRITE LOG
  b0 da 01 00 4f c2 a0 00      01:46:05.928  SMART RETURN STATUS
  80 44 00 00 44 57 a0 00      01:46:05.928  [VENDOR SPECIFIC]
  b0 d6 01 be 4f c2 a0 00      01:46:05.906  SMART WRITE LOG
  80 45 00 01 44 57 a0 00      01:46:05.905  [VENDOR SPECIFIC]

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Conveyance offline  Completed without error       00%        52         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Hors ligne

#9 12/11/2013 10:31:03

chepioq
FEDORA FOR EVER
Lieu : a l'est de marseille
Inscription : 07/06/2006
Messages : 7 350

Re : [Résolu] Démarrage lent SSD + HDD

Apparemment tu as une erreur sur ton hdd.

Mais je ne suis pas assez calé pour savoir ce que cela signifie, ni quelle est cette erreur.


Tout est dans tout... et réciproquement...
C'est quoi un chalumeau??? C'est un dromaludaire à deux bosses...
Quand le sage montre la lune l'imbécile regarde le doigt...
1277887812.gif

Hors ligne

#10 12/11/2013 10:34:11

PapsOu
Developpeur PHP7 Symfony3
Rédacteur Wiki
Lieu : Quimper
Inscription : 27/11/2009
Messages : 1 849
Site Web

Re : [Résolu] Démarrage lent SSD + HDD

Hum, en effet, 52h pour le HDD c'est fort étonnant, ça fait 2 ans que je l'ai...

Me conseillerais-tu de réinstaller tout mon système + /home sur le SSD directement ? Et à la limite, me servir du HDD comme stockage secondaire ?

Dernière modification par PapsOu (12/11/2013 10:34:28)

Hors ligne

#11 12/11/2013 10:40:34

chepioq
FEDORA FOR EVER
Lieu : a l'est de marseille
Inscription : 07/06/2006
Messages : 7 350

Re : [Résolu] Démarrage lent SSD + HDD

D'après ce que j'ai pu voir sur la toile concernant l'erreur "ATA Error Count", il serait possible que cela soit un problème avec la connexion de ce disque.
Vérifie que le cable soit bien branché.


Tout est dans tout... et réciproquement...
C'est quoi un chalumeau??? C'est un dromaludaire à deux bosses...
Quand le sage montre la lune l'imbécile regarde le doigt...
1277887812.gif

Hors ligne

#12 12/11/2013 10:45:53

PapsOu
Developpeur PHP7 Symfony3
Rédacteur Wiki
Lieu : Quimper
Inscription : 27/11/2009
Messages : 1 849
Site Web

Re : [Résolu] Démarrage lent SSD + HDD

Euh, ouai, je regarderai ça dans la journée (je me réinstalle plein de paquets pour pouvoir bosser => home office) du coup je vais checker ça entre midi et deux.

Par contre, j'ai deux napes sata avec chacune 2 conneteurs sata. Faut-il que je mette les deux disques sur la même nape ou bien un disque avec le DVD et l'autre tout seul ? (j'ai une carte mère ASUS qui a des connecteur Express Gate et Anti surge. Je vais tester de connecter les disques sur l'anti surge plutot que sur l'express gate...

Hors ligne

#13 12/11/2013 10:51:48

VINDICATORs
RédactWikix and the graphicatorix!
Modérateur
Lieu : Toulouse(31) France
Inscription : 23/11/2004
Messages : 18 032
Site Web

Re : [Résolu] Démarrage lent SSD + HDD

A savoir qu'il faut de bon câble SATA avec les SSD, sans compter que souvent c'est quand même fragile. J'ai déjà dut renvoyé des lots de câble défectueux...

Les ports SATA sont indépendants les un des autres, donc pas de soucis à ce niveau!

Dernière modification par VINDICATORs (12/11/2013 10:53:20)


AMD R7 2700X, MSI Pro Carbon X470, 32Go DDR4 3200@3333Mhz Gskill TridentZ CL14, RX 5700XT MSI Watercooling OC
SSD: 1x 970 EVO NVME 500Go + 1x500Go BX500 + 1x500Go 860 EVO, 3x1To 860 Evo, HDD 1x2To WD black, 1x4to WD Black, 1x3To WD Red, GMT BeQuiet Dark 900+Lepa 800W 80+gold
AMD R5 2600, Asus A320, 16Go DDR4 2400Mhz Gskill AEGIS, 1x250GO SSD EVO, 3x 2To RAID 5 WD Blue, Gigabyte 400W+Cube Chieftec/ AMD R3 2200g + 8Go DDR4 2133+1xSSD Evo 500Go , 3x1To QVO RAID5

Hors ligne

#14 12/11/2013 11:00:24

PapsOu
Developpeur PHP7 Symfony3
Rédacteur Wiki
Lieu : Quimper
Inscription : 27/11/2009
Messages : 1 849
Site Web

Re : [Résolu] Démarrage lent SSD + HDD

VINDICATORs a écrit :

A savoir qu'il faut de bon câble SATA avec les SSD, sans compter que souvent c'est quand même fragile. J'ai déjà dut renvoyé des lots de câble défectueux...

Les ports SATA sont indépendants les un des autres, donc pas de soucis à ce niveau!

Faut dire que j'ai trouvé, dans mon armoire où traine pas mal de petits accessoires pas très récents, une nappe rose qui était fournie avec mon PC (il y a au moins deux ans), toujours embalée.

Je vais peut être devoir acheter une ou deux nappes neuve pour voir si le problème viens de la...

Hors ligne

#15 12/11/2013 11:09:51

elbelo69
Membre
Lieu : Lyon
Inscription : 03/09/2007
Messages : 358

Re : [Résolu] Démarrage lent SSD + HDD

Salut,

PapsOu a écrit :

Par contre, j'ai deux napes sata avec chacune 2 connecteurs sata. Faut-il que je mette les deux disques sur la même nape ou bien un disque avec le DVD et l'autre tout seul ?

Je te conseil les montages suivants : le SSD sur un port Sata seul. Le DD classique et le DVD sur le deuxieme port Sata.

Le SSD a un débit supérieure au HDD classique. Si ils sont su le même port SATA, tu auras une différence flagrante en écriture (quand tu écris sur le SSD explicitement) mais en lecture, le SSD aura le débit du HDD. Je ne comprends pas pourquoi cette différence, mais j'ai testé et re-testé, c'est toujours comme ça. Pareil quand tu mélange SATAII et SATAIII sur le même contrôleur.

Moi j'ai une config avec un SSD sur SATA 1 (premier contrôleur SATA, controleur SATA carte mére) et un hybride de 500Go (classique + cache SSD) sur le port SATA 2 (autre contrôleur).
Tu peux verifier si tu as bien deux contrôleur dans /proc/scsi/scsi" ou un truc dans le genre (je suis au boulot, sous Windows7, je ne peux donc pas vérifier et j'avoue, c de mémoire pas le temps de chercher sur le Web smile).

Hors ligne

#16 12/11/2013 11:25:07

PapsOu
Developpeur PHP7 Symfony3
Rédacteur Wiki
Lieu : Quimper
Inscription : 27/11/2009
Messages : 1 849
Site Web

Re : [Résolu] Démarrage lent SSD + HDD

$ cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: TSSTcorp Model: CDDVDW SH-S223C  Rev: SB06
  Type:   CD-ROM                           ANSI  SCSI revision: 05
Host: scsi1 Channel: 00 Id: 00 Lun: 00
  Vendor: ATA      Model: WDC WD5000AAKX-0 Rev: 15.0
  Type:   Direct-Access                    ANSI  SCSI revision: 05
Host: scsi2 Channel: 00 Id: 00 Lun: 00
  Vendor: ATA      Model: Samsung SSD 840  Rev: DXM0
  Type:   Direct-Access                    ANSI  SCSI revision: 05
Host: scsi6 Channel: 00 Id: 00 Lun: 00
  Vendor: IC25N060 Model: ATMR04-0         Rev: MO3O
  Type:   Direct-Access                    ANSI  SCSI revision: 00

Ça me parle pas trop ça, et je vois pas trop si c'est les controlleurs différents...

Hors ligne

#17 12/11/2013 11:52:55

elbelo69
Membre
Lieu : Lyon
Inscription : 03/09/2007
Messages : 358

Re : [Résolu] Démarrage lent SSD + HDD

Donc, ce sont donc des replicateurs de port mais pas de contrôleur indépendant.

Si contrôleur indépendant tu aurais des ID scsci différents. Donc, dans ta configuration, peut importe comment des disques et DVD sont branchés, enfin, de ce que je comprends !:-)

voir https://www.sata-io.org/port-multipliers (merci delicious qui garde mes bookmarks).

La conclusion de l'article :

Port multipliers are simple mechanisms that allow a single active host connection to communicate with multiple drives. They allow easy, cost-effective storage scalability both inside and outside the PC or server with standard SATA drives. Additional controllers are no longer necessarily needed to expand storage. In-box cabling is greatly simplified with fewer cables attached to more drives. Port multipliers allow significantly higher performance in external storage than either USB or Firewire™.

Donc je suis peut être "has been" comme dirais ma fille ....:-D
A l'époque un contrôleur SATA PM coûter 3 fois le prix. J'avais donc acheté deux carte controleur SATA PCIx  (il y a même pas 8 mois ...) De ce que je trouve sur le Web, même une carte à 16,95€ supporte PM désormais.
Pfffff, ça passe vite ....

Hors ligne

#18 12/11/2013 12:15:17

PapsOu
Developpeur PHP7 Symfony3
Rédacteur Wiki
Lieu : Quimper
Inscription : 27/11/2009
Messages : 1 849
Site Web

Re : [Résolu] Démarrage lent SSD + HDD

Ok, donc en gros, si je veux de la perf à gogo (6GB/s au lieu de 1.5 GB/s), je dois installer uniquement sur le SSD tout mon système (y compris /home) et ne pas brancher le HDD pour éviter de trop multiplexer par ce réplicateur de ports...

J'ai les glandes là....

Vous confirmez ?

Hors ligne

#19 12/11/2013 12:33:38

elbelo69
Membre
Lieu : Lyon
Inscription : 03/09/2007
Messages : 358

Re : [Résolu] Démarrage lent SSD + HDD

A priori oui....
Sinon 16,95€ chez LDLC et nouveau contrôleur Sata sur PCI Express....

Hors ligne

#20 12/11/2013 12:37:04

PapsOu
Developpeur PHP7 Symfony3
Rédacteur Wiki
Lieu : Quimper
Inscription : 27/11/2009
Messages : 1 849
Site Web

Re : [Résolu] Démarrage lent SSD + HDD

elbelo69 a écrit :

A priori oui....
Sinon 16,95€ chez LDLC et nouveau contrôleur Sata sur PCI Express....

Ok, je creuserai de ce côté...

Merci du coup de main en tout cas.

Hors ligne

#21 13/11/2013 09:42:00

PapsOu
Developpeur PHP7 Symfony3
Rédacteur Wiki
Lieu : Quimper
Inscription : 27/11/2009
Messages : 1 849
Site Web

Re : [Résolu] Démarrage lent SSD + HDD

Je reviens aux nouvelles. J'ai réinstaller mon système sur le SSD uniquement, mais même problème. Donc le soucis devrai surement provenir du controlleur SATA. (Si c'est autre chose je vois pas trop)

Par contre, j'ai de grosses instabilité avec Gnome. Je switch sur KDE, plus stable pour le moment.

Je passe pas en résolu pour le moment, je verrai ce que ça donne avec un controleur tout beau tout neuf (et accessoirement des nappes SATA neuves)

Hors ligne

#22 13/11/2013 13:12:33

VINDICATORs
RédactWikix and the graphicatorix!
Modérateur
Lieu : Toulouse(31) France
Inscription : 23/11/2004
Messages : 18 032
Site Web

Re : [Résolu] Démarrage lent SSD + HDD

Bon... Au passage pour l'histoire du 1,5GB etc... c'est selon ce que supporte comme norme SATA la/les puces de ta carte maman.

A mon avis soit tu a un soucis avec ton SSD (un petit rapport smartd?), soit un firmeware merdique (voir les infos sur le site du fabricant/fournisseur de ton SSD).

Ton soucis vient de udisk2 et il faudrait creuser par là.

Je n'ai que du SATA 3Gbs et je tourne avec un boot de moins de 5s avec Udisk2 à 104ms. Après c'est vrai que les portables c'est autre chose, mais j'ai aussi la flemme de chercher ce dont tu dispose comme norme ;).


AMD R7 2700X, MSI Pro Carbon X470, 32Go DDR4 3200@3333Mhz Gskill TridentZ CL14, RX 5700XT MSI Watercooling OC
SSD: 1x 970 EVO NVME 500Go + 1x500Go BX500 + 1x500Go 860 EVO, 3x1To 860 Evo, HDD 1x2To WD black, 1x4to WD Black, 1x3To WD Red, GMT BeQuiet Dark 900+Lepa 800W 80+gold
AMD R5 2600, Asus A320, 16Go DDR4 2400Mhz Gskill AEGIS, 1x250GO SSD EVO, 3x 2To RAID 5 WD Blue, Gigabyte 400W+Cube Chieftec/ AMD R3 2200g + 8Go DDR4 2133+1xSSD Evo 500Go , 3x1To QVO RAID5

Hors ligne

#23 13/11/2013 15:51:19

PapsOu
Developpeur PHP7 Symfony3
Rédacteur Wiki
Lieu : Quimper
Inscription : 27/11/2009
Messages : 1 849
Site Web

Re : [Résolu] Démarrage lent SSD + HDD

Le SSd semble sain :

# smartctl -a /dev/sda
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.11.7-200.fc19.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Samsung based SSDs
Device Model:     Samsung SSD 840 PRO Series
Serial Number:    S1ANNEAD910196F
LU WWN Device Id: 5 002538 550407f9c
Firmware Version: DXM05B0Q
User Capacity:    128 035 676 160 bytes [128 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Nov 13 14:37:59 2013 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (    0) seconds.
Offline data collection
capabilities:                    (0x53) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  15) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       24
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       13
177 Wear_Leveling_Count     0x0013   100   100   000    Pre-fail  Always       -       0
179 Used_Rsvd_Blk_Cnt_Tot   0x0013   100   100   010    Pre-fail  Always       -       0
181 Program_Fail_Cnt_Total  0x0032   100   100   010    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0032   100   100   010    Old_age   Always       -       0
183 Runtime_Bad_Block       0x0013   100   100   010    Pre-fail  Always       -       0
187 Uncorrectable_Error_Cnt 0x0032   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0032   071   068   000    Old_age   Always       -       29
195 ECC_Error_Rate          0x001a   200   200   000    Old_age   Always       -       0
199 CRC_Error_Count         0x003e   100   100   000    Old_age   Always       -       0
235 POR_Recovery_Count      0x0012   100   100   000    Old_age   Always       -       0
241 Total_LBAs_Written      0x0032   099   099   000    Old_age   Always       -       79262440

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%        24         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
  255        0    65535  Read_scanning was never started
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Pour la carte môman + BIOS, voici quelques infos :

lshw-gui :
product: M4A77T/USB3
vendor: ASUSTeK Computer INC.
version: Rev X.0x
serial: MF70B3G13100624
slot: To Be Filled By O.E.M.

vendor: American Megatrends Inc.
version: 0601
size: 64KiB
capacity: 960KiB
capabilities:
	ISA bus,
	PCI bus,
	Plug-and-Play,
	Advanced Power Management,
	BIOS EEPROM can be upgraded,
	BIOS shadowing,
	ESCD,
	Booting from CD-ROM/DVD,
	Selectable boot path,
	BIOS ROM is socketed,
	Enhanced Disk Drive extensions,
	5.25" 1.2MB floppy,
	3.5" 720KB floppy,
	3.5" 2.88MB floppy,
	Print Screen key,
	i8042 keyboard controller,
	INT14 serial line control,
	INT17 printer control,
	INT10 CGA/Mono video,
	ACPI,
	USB legacy emulation,
	Booting from LS-120,
	Booting from ATAPI ZIP,
	BIOS boot specification

Pour le controller SATA :

product: SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] [1002:4390]
vendor: Advanced Micro Devices, Inc. [AMD/ATI] [1002]
bus info: pci@0000:00:11.0
version: 00
width: 32 bits
clock: 66MHz
capabilities:
	storage,
	Power Management,
	ahci_1.0,
	bus mastering,
	PCI capabilities listing
configuration:
	driver: ahci
	latency: 64
resources:
	irq: 22
	ioport: c000(size=8)
	ioport: b000(size=4)
	ioport: a000(size=8)
	ioport: 9000(size=4)
	ioport: 8000(size=16)
	memory: fbcffc00-fbcfffff

il est en IDE Mode, mais je crois avoir vu dans le bios 2 autres choix pour ce mode : RAID et SCSI (Raid je vois très bien ce que c'est, mais SCSI j'ai un doute. Donc dans le doute je touche pas les paramètres que je connais pas => oui je ne touche pas à grand chose tongue )

Mais je vérifierai d'ici demain si mon soucis de hostname ne pouvait pas engendrer cette lenteur de démarrage (genre NTP ou autre pendant le boot). Normalement aucuns rapports, mais ça ma ralenti un paquet d'application, donc sait-on jamais. Je rebooterai ma bécane dans la soirée.

Ah, oui, et à noter que pendant mes nombreux reboots hier, j'ai vu qu'il n'y avait pas que udisks2 qui été lent. Quand ce n'était pas lui qui prennait son temps, c'était systemd-udev-settle.service qui mettait plus de 20s...

Et pour rappel, mon partitionnement actuel (que je pense pas changer vu le temps que ça prend de tout reconfigurer aux petit oignons) :

Disque /dev/sda : 128.0 Go, 128035676160 octets, 250069680 secteurs
Unités = secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0x00027434

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sda1   *        2048     2050047     1024000   83  Linux
/dev/sda2         2050048   250068991   124009472   8e  Linux LVM

// -------------------------------------------------------
// Disque Dur non monté au démarrage
// -------------------------------------------------------
Disque /dev/sdb : 500.1 Go, 500107862016 octets, 976773168 secteurs
Unités = secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0xd334d334

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sdb1            2048   976773119   488385536   83  Linux

Disque /dev/mapper/fedora-root : 74.4 Go, 74448896000 octets, 145408000 secteurs
Unités = secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets


Disque /dev/mapper/fedora-swap : 4299 Mo, 4299161600 octets, 8396800 secteurs
Unités = secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets


Disque /dev/mapper/fedora-home : 48.2 Go, 48230301696 octets, 94199808 secteurs
Unités = secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets

Hors ligne

#24 13/11/2013 16:57:55

VINDICATORs
RédactWikix and the graphicatorix!
Modérateur
Lieu : Toulouse(31) France
Inscription : 23/11/2004
Messages : 18 032
Site Web

Re : [Résolu] Démarrage lent SSD + HDD

Ok, j'ai eu le même soucis avec systemd-udev-settle.service pendant une periode. Normalement une mise à jour avait résolu le souci.

Donc à mon avis il faudrait fouiller par là.


AMD R7 2700X, MSI Pro Carbon X470, 32Go DDR4 3200@3333Mhz Gskill TridentZ CL14, RX 5700XT MSI Watercooling OC
SSD: 1x 970 EVO NVME 500Go + 1x500Go BX500 + 1x500Go 860 EVO, 3x1To 860 Evo, HDD 1x2To WD black, 1x4to WD Black, 1x3To WD Red, GMT BeQuiet Dark 900+Lepa 800W 80+gold
AMD R5 2600, Asus A320, 16Go DDR4 2400Mhz Gskill AEGIS, 1x250GO SSD EVO, 3x 2To RAID 5 WD Blue, Gigabyte 400W+Cube Chieftec/ AMD R3 2200g + 8Go DDR4 2133+1xSSD Evo 500Go , 3x1To QVO RAID5

Hors ligne

#25 13/11/2013 17:36:18

PapsOu
Developpeur PHP7 Symfony3
Rédacteur Wiki
Lieu : Quimper
Inscription : 27/11/2009
Messages : 1 849
Site Web

Re : [Résolu] Démarrage lent SSD + HDD

Je suis à jour actuellement. Je verrai ça ce soir alors. Je croise les doigts.

J'espère surtout que c'est pas à cause du firmware : firmware Samsung 840 PRO, j'ai le DXM05B0Q....

Dernière modification par PapsOu (13/11/2013 17:36:26)

Hors ligne

Pied de page des forums