Je reviens aux nouvelles. J'ai réinstaller mon système sur le SSD uniquement, mais même problème. Donc le soucis devrai surement provenir du controlleur SATA. (Si c'est autre chose je vois pas trop)

Par contre, j'ai de grosses instabilité avec Gnome. Je switch sur KDE, plus stable pour le moment.

Je passe pas en résolu pour le moment, je verrai ce que ça donne avec un controleur tout beau tout neuf (et accessoirement des nappes SATA neuves)
Bon... Au passage pour l'histoire du 1,5GB etc... c'est selon ce que supporte comme norme SATA la/les puces de ta carte maman.

A mon avis soit tu a un soucis avec ton SSD (un petit rapport smartd?), soit un firmeware merdique (voir les infos sur le site du fabricant/fournisseur de ton SSD).

Ton soucis vient de udisk2 et il faudrait creuser par là.

Je n'ai que du SATA 3Gbs et je tourne avec un boot de moins de 5s avec Udisk2 à 104ms. Après c'est vrai que les portables c'est autre chose, mais j'ai aussi la flemme de chercher ce dont tu dispose comme norme 😉.
Le SSd semble sain :
# smartctl -a /dev/sda
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.11.7-200.fc19.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Samsung based SSDs
Device Model:     Samsung SSD 840 PRO Series
Serial Number:    S1ANNEAD910196F
LU WWN Device Id: 5 002538 550407f9c
Firmware Version: DXM05B0Q
User Capacity:    128 035 676 160 bytes [128 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Nov 13 14:37:59 2013 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (    0) seconds.
Offline data collection
capabilities:                    (0x53) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  15) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       24
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       13
177 Wear_Leveling_Count     0x0013   100   100   000    Pre-fail  Always       -       0
179 Used_Rsvd_Blk_Cnt_Tot   0x0013   100   100   010    Pre-fail  Always       -       0
181 Program_Fail_Cnt_Total  0x0032   100   100   010    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0032   100   100   010    Old_age   Always       -       0
183 Runtime_Bad_Block       0x0013   100   100   010    Pre-fail  Always       -       0
187 Uncorrectable_Error_Cnt 0x0032   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0032   071   068   000    Old_age   Always       -       29
195 ECC_Error_Rate          0x001a   200   200   000    Old_age   Always       -       0
199 CRC_Error_Count         0x003e   100   100   000    Old_age   Always       -       0
235 POR_Recovery_Count      0x0012   100   100   000    Old_age   Always       -       0
241 Total_LBAs_Written      0x0032   099   099   000    Old_age   Always       -       79262440

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%        24         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
  255        0    65535  Read_scanning was never started
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Pour la carte môman + BIOS, voici quelques infos :
lshw-gui :
product: M4A77T/USB3
vendor: ASUSTeK Computer INC.
version: Rev X.0x
serial: MF70B3G13100624
slot: To Be Filled By O.E.M.

vendor: American Megatrends Inc.
version: 0601
size: 64KiB
capacity: 960KiB
capabilities:
	ISA bus,
	PCI bus,
	Plug-and-Play,
	Advanced Power Management,
	BIOS EEPROM can be upgraded,
	BIOS shadowing,
	ESCD,
	Booting from CD-ROM/DVD,
	Selectable boot path,
	BIOS ROM is socketed,
	Enhanced Disk Drive extensions,
	5.25" 1.2MB floppy,
	3.5" 720KB floppy,
	3.5" 2.88MB floppy,
	Print Screen key,
	i8042 keyboard controller,
	INT14 serial line control,
	INT17 printer control,
	INT10 CGA/Mono video,
	ACPI,
	USB legacy emulation,
	Booting from LS-120,
	Booting from ATAPI ZIP,
	BIOS boot specification
Pour le controller SATA :
product: SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] [1002:4390]
vendor: Advanced Micro Devices, Inc. [AMD/ATI] [1002]
bus info: pci@0000:00:11.0
version: 00
width: 32 bits
clock: 66MHz
capabilities:
	storage,
	Power Management,
	ahci_1.0,
	bus mastering,
	PCI capabilities listing
configuration:
	driver: ahci
	latency: 64
resources:
	irq: 22
	ioport: c000(size=8)
	ioport: b000(size=4)
	ioport: a000(size=8)
	ioport: 9000(size=4)
	ioport: 8000(size=16)
	memory: fbcffc00-fbcfffff
il est en IDE Mode, mais je crois avoir vu dans le bios 2 autres choix pour ce mode : RAID et SCSI (Raid je vois très bien ce que c'est, mais SCSI j'ai un doute. Donc dans le doute je touche pas les paramètres que je connais pas => oui je ne touche pas à grand chose :-P )

Mais je vérifierai d'ici demain si mon soucis de hostname ne pouvait pas engendrer cette lenteur de démarrage (genre NTP ou autre pendant le boot). Normalement aucuns rapports, mais ça ma ralenti un paquet d'application, donc sait-on jamais. Je rebooterai ma bécane dans la soirée.

Ah, oui, et à noter que pendant mes nombreux reboots hier, j'ai vu qu'il n'y avait pas que udisks2 qui été lent. Quand ce n'était pas lui qui prennait son temps, c'était systemd-udev-settle.service qui mettait plus de 20s...

Et pour rappel, mon partitionnement actuel (que je pense pas changer vu le temps que ça prend de tout reconfigurer aux petit oignons) :
Disque /dev/sda : 128.0 Go, 128035676160 octets, 250069680 secteurs
Unités = secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0x00027434

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sda1   *        2048     2050047     1024000   83  Linux
/dev/sda2         2050048   250068991   124009472   8e  Linux LVM

// -------------------------------------------------------
// Disque Dur non monté au démarrage
// -------------------------------------------------------
Disque /dev/sdb : 500.1 Go, 500107862016 octets, 976773168 secteurs
Unités = secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0xd334d334

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sdb1            2048   976773119   488385536   83  Linux

Disque /dev/mapper/fedora-root : 74.4 Go, 74448896000 octets, 145408000 secteurs
Unités = secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets


Disque /dev/mapper/fedora-swap : 4299 Mo, 4299161600 octets, 8396800 secteurs
Unités = secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets


Disque /dev/mapper/fedora-home : 48.2 Go, 48230301696 octets, 94199808 secteurs
Unités = secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Ok, j'ai eu le même soucis avec systemd-udev-settle.service pendant une periode. Normalement une mise à jour avait résolu le souci.

Donc à mon avis il faudrait fouiller par là.
Je suis à jour actuellement. Je verrai ça ce soir alors. Je croise les doigts.

J'espère surtout que c'est pas à cause du firmware : firmware Samsung 840 PRO, j'ai le DXM05B0Q....
Bonjour,
depuis quelques jours je rencontre le même problème que PapsOu :

SSD corsair force GT 120Go (win7 + fedora)
/boot(windows) (500MB)
/windows (~86GB)
/boot(fedora) (500MB)
/ (~33GB) (LVM2)

HDD WD 2TB (LVM2)
/var (~10?GB)
/swap (16GB)
/home (le reste)

systemd-analyse
systemd-analyze blame
         20.431s accounts-daemon.service
         19.117s firewalld.service
         19.109s systemd-logind.service
         19.109s avahi-daemon.service
         19.065s chronyd.service
         19.057s rtkit-daemon.service
         17.213s gdm.service
          2.889s sendmail.service
          2.031s sm-client.service
          1.900s akmods.service
          1.851s akmods-shutdown.service
          1.734s NetworkManager.service
          1.263s polkit.service
           310ms nfs-lock.service
           291ms bluetooth.service
           209ms systemd-fsck@dev-mapper-fedora_hdd\x2dvar.service
           184ms plymouth-start.service
           162ms systemd-fsck@dev-mapper-fedora_hdd\x2dhome.service
           154ms systemd-random-seed-load.service
           152ms home.mount
           124ms udisks2.service
           104ms systemd-tmpfiles-setup.service
            95ms lvm2-monitor.service
            80ms dlna.mount
            65ms lm_sensors.service
            63ms plymouth-read-write.service
            63ms mcelog.service
            60ms abrt-ccpp.service
            59ms systemd-user-sessions.service
            55ms colord.service
            50ms proc-fs-nfsd.mount
            48ms systemd-tmpfiles-setup-dev.service
            44ms auditd.service
            44ms systemd-journal-flush.service
            42ms var.mount
            38ms systemd-fsck-root.service
            31ms systemd-fsck@dev-disk-by\x2duuid-94440ffb\x2dcf11\x2d4053\x2dac3d\x2daee151c5af32.service
            30ms systemd-udev-trigger.service
            29ms fedora-loadmodules.service
            23ms rc-local.service
            19ms systemd-binfmt.service
            18ms systemd-sysctl.service
            16ms sys-kernel-config.mount
            15ms lvm2-lvmetad.service
            14ms proc-sys-fs-binfmt_misc.mount
            13ms fedora-readonly.service
            11ms tmp.mount
            10ms systemd-readahead-replay.service
            10ms systemd-readahead-collect.service
             8ms rpcbind.service
             7ms dev-mqueue.mount
             7ms systemd-udevd.service
             7ms sys-kernel-debug.mount
             7ms systemd-vconsole-setup.service
             7ms upower.service
             6ms dev-mapper-fedora_hdd\x2dswap.swap
             6ms dev-hugepages.mount
             5ms NetworkManager-dispatcher.service
             5ms systemd-update-utmp-runlevel.service
             4ms systemd-readahead-done.service
             3ms systemd-remount-fs.service
             3ms wpa_supplicant.service
             2ms sys-fs-fuse-connections.mount
             2ms boot.mount
             1ms plymouth-quit-wait.service
           946us var-lib-nfs-rpc_pipefs.mount
Contrairement à PapsOu moi j'ai pas mal de service qui rame sec au démarrage.

Le boot.log
cat /var/log/boot.log 
[  OK  ] Started Show Plymouth Boot Screen.
[  OK  ] Reached target Paths.
[  OK  ] Reached target Basic System.
[  OK  ] Started dracut initqueue hook.
         Mounting /sysroot...
[  OK  ] Mounted /sysroot.
[  OK  ] Reached target Initrd Root File System.
         Starting Reload Configuration from the Real Root...
[  OK  ] Started Reload Configuration from the Real Root.
[  OK  ] Reached target Initrd File Systems.
[  OK  ] Reached target Initrd Default Target.

Welcome to Fedora 19 (Schrödinger’s Cat)!

[  OK  ] Stopped Switch Root.
[  OK  ] Stopped target Switch Root.
[  OK  ] Stopped target Initrd File Systems.
[  OK  ] Stopped target Initrd Root File System.
         Starting Replay Read-Ahead Data...
         Starting Collect Read-Ahead Data...
[  OK  ] Reached target Login Prompts.
[  OK  ] Listening on Syslog Socket.
[  OK  ] Reached target Remote File Systems.
         Mounting RPC Pipe File System...
[  OK  ] Listening on Delayed Shutdown Socket.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
         Mounting POSIX Message Queue File System...
         Mounting Debug File System...
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Listening on udev Control Socket.
         Starting udev Coldplug all Devices...
[  OK  ] Reached target Encrypted Volumes.
         Mounting Huge Pages File System...
[  OK  ] Set up automount Arbitrary Executable File Formats F...utomount Point.
         Starting Create static device nodes in /dev...
[  OK  ] Listening on LVM2 metadata daemon socket.
[  OK  ] Listening on Device-mapper event daemon FIFOs.
         Starting Monitoring of LVM2 mirrors, snapshots etc. ...ress polling...
         Expecting device dev-mapper-fedora_hdd\x2dswap.device...
         Mounting Temporary Directory...
         Expecting device dev-disk-by\x2duuid-c2c7f291\x2d912...62dd3.device...
         Expecting device dev-disk-by\x2duuid-94440ffb\x2dcf1...5af32.device...
         Expecting device dev-mapper-fedora_hdd\x2dhome.device...
         Expecting device dev-mapper-fedora_hdd\x2dvar.device...
[  OK  ] Started Collect Read-Ahead Data.
[  OK  ] Started Replay Read-Ahead Data.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted Debug File System.
[  OK  ] Mounted Huge Pages File System.
         Starting Load legacy module configuration...
         Starting File System Check on Root Device...
         Starting Apply Kernel Variables...
         Mounting Configuration File System...
         Starting Set Up Additional Binary Formats...
[  OK  ] Stopped Trigger Flushing of Journal to Persistent Storage.
         Stopping Journal Service...
[  OK  ] Stopped Journal Service.
         Starting Journal Service...
[  OK  ] Started Journal Service.
[  OK  ] Mounted Temporary Directory.
         Starting LVM2 metadata daemon...
         Mounting Arbitrary Executable File Formats File System...
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Mounted Configuration File System.
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started LVM2 metadata daemon.
[  OK  ] Mounted Arbitrary Executable File Formats File System.
[  OK  ] Started Set Up Additional Binary Formats.
[  OK  ] Started Load legacy module configuration.
systemd-fsck[385]: /dev/mapper/fedora_ssd-root : propre, 193579/2019472 fichiers, 1523959/8076288 blocs
[  OK  ] Started File System Check on Root Device.
         Starting Remount Root and Kernel File Systems...
[  OK  ] Mounted RPC Pipe File System.
[  OK  ] Started Create static device nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  ] Started Remount Root and Kernel File Systems.
         Starting Configure read-only root support...
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Started Configure read-only root support.
[  OK  ] Started Monitoring of LVM2 mirrors, snapshots etc. u...ogress polling.
[  OK  ] Found device /dev/mapper/fedora_hdd-swap.
         Activating swap /dev/mapper/fedora_hdd-swap...
[  OK  ] Activated swap /dev/mapper/fedora_hdd-swap.
[  OK  ] Reached target Swap.
[  OK  ] Found device Corsair_Force_GT.
         Starting File System Check on /dev/disk/by-uuid/9444...aee151c5af32...
[  OK  ] Found device ST3500320AS.
         Mounting /dlna...
systemd-fsck[506]: /dev/sda5 : propre, 359/128016 fichiers, 128401/512000 blocs
[  OK  ] Started File System Check on /dev/disk/by-uuid/94440...d-aee151c5af32.
         Mounting /boot...
[  OK  ] Mounted /boot.
[  OK  ] Mounted /dlna.
[  OK  ] Reached target Sound Card.
[  OK  ] Found device /dev/mapper/fedora_hdd-var.
         Starting File System Check on /dev/mapper/fedora_hdd-var...
[  OK  ] Found device /dev/mapper/fedora_hdd-home.
         Starting File System Check on /dev/mapper/fedora_hdd-home...
systemd-fsck[531]: /dev/mapper/fedora_hdd-home : propre, 50011/120430592 fichiers, 363749105/481721344 blocs
systemd-fsck[527]: /dev/mapper/fedora_hdd-var : propre, 8337/640848 fichiers, 476254/2560000 blocs
[  OK  ] Started File System Check on /dev/mapper/fedora_hdd-var.
[  OK  ] Started File System Check on /dev/mapper/fedora_hdd-home.
         Mounting /home...
         Mounting /var...
[  OK  ] Mounted /var.
         Starting Load Random Seed...
         Mounting RPC Pipe File System...
[  OK  ] Mounted RPC Pipe File System.
[  OK  ] Mounted /home.
[  OK  ] Reached target Local File Systems.
         Starting Recreate Volatile Files and Directories...
         Starting Security Auditing Service...
         Starting Trigger Flushing of Journal to Persistent Storage...
         Starting Tell Plymouth To Write Out Runtime Data...
[  OK  ] Started Load Random Seed.
[  OK  ] Started Security Auditing Service.
[  OK  ] Started Trigger Flushing of Journal to Persistent Storage.
[  OK  ] Started Tell Plymouth To Write Out Runtime Data.
[  OK  ] Started Recreate Volatile Files and Directories.
[  OK  ] Reached target System Initialization.
[  OK  ] Reached target Timers.
         Starting Manage Sound Card State (restore and store)...
[  OK  ] Started Manage Sound Card State (restore and store).
[  OK  ] Reached target Paths.
[  OK  ] Listening on RPCbind Server Activation Socket.
[  OK  ] Listening on PC/SC Smart Card Daemon Activation Socket.
[  OK  ] Listening on Open-iSCSI iscsid Socket.
[  OK  ] Listening on Open-iSCSI iscsiuio Socket.
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[  OK  ] Listening on CUPS Printing Service Sockets.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
         Starting firewalld - dynamic firewall daemon...
         Starting Hardware RNG Entropy Gatherer Daemon...
[  OK  ] Started Hardware RNG Entropy Gatherer Daemon.
         Starting irqbalance daemon...
[  OK  ] Started irqbalance daemon.
         Starting Machine Check Exception Logging Daemon...
         Starting Network Manager Script Dispatcher Service...
         Starting ABRT Automated Bug Reporting Tool...
[  OK  ] Started ABRT Automated Bug Reporting Tool.
         Starting ABRT kernel log watcher...
[  OK  ] Started ABRT kernel log watcher.
         Starting Self Monitoring and Reporting Technology (SMART) Daemon...
[  OK  ] Started Self Monitoring and Reporting Technology (SMART) Daemon.
         Starting Builds and install new kmods from akmod packages...
         Starting ABRT Xorg log watcher...
[  OK  ] Started ABRT Xorg log watcher.
         Starting Builds and install new kmods from akmod packages...
         Starting NTP client/server...
         Starting Initialize hardware monitoring sensors...
         Starting Install ABRT coredump hook...
         Starting Login Service...
         Starting Accounts Service...
         Starting Avahi mDNS/DNS-SD Stack...
         Starting Permit User Sessions...
         Starting System Logging Service...
[  OK  ] Started System Logging Service.
         Starting D-Bus System Message Bus...
[  OK  ] Started D-Bus System Message Bus.
         Starting RealtimeKit Scheduling Policy Service...
[  OK  ] Started Machine Check Exception Logging Daemon.
[  OK  ] Started Install ABRT coredump hook.
[  OK  ] Started Permit User Sessions.
         Starting Job spooling tools...
[  OK  ] Started Job spooling tools.
         Starting Command Scheduler...
[  OK  ] Started Command Scheduler.
[  OK  ] Started Initialize hardware monitoring sensors.
[  OK  ] Started Builds and install new kmods from akmod packages.
[  OK  ] Started Builds and install new kmods from akmod packages.
         Starting GNOME Display Manager...
[  OK  ] Started Network Manager Script Dispatcher Service.
[  OK  ] Started NTP client/server.
         Starting Authorization Manager...
[  OK  ] Started Login Service.
[  OK  ] Started firewalld - dynamic firewall daemon.
[  OK  ] Started Avahi mDNS/DNS-SD Stack.
         Starting Network Manager...
[  OK  ] Started RealtimeKit Scheduling Policy Service.
[  OK  ] Started GNOME Display Manager.
Le rapport fdisk
fdisk -l

Disque /dev/sda : 120.0 Go, 120034123776 octets, 234441648 secteurs
Unités = secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0x00096b6b

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sda1            2048     1026047      512000   83  Linux
/dev/sda2   *     1026048     1230847      102400    7  HPFS/NTFS/exFAT
/dev/sda3         1230848   168798207    83783680    7  HPFS/NTFS/exFAT
/dev/sda4       168798208   234440703    32821248    5  Extended
/dev/sda5       168802304   169826303      512000   83  Linux
/dev/sda6       169828352   234440703    32306176   8e  Linux LVM

Disque /dev/sdb : 2000.4 Go, 2000398934016 octets, 3907029168 secteurs
Unités = secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 4096 octets
taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0x0007984c

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sdb1            2048  3907028991  1953513472   8e  Linux LVM
Attention : la prise en charge de GPT dans fdisk est récente, et par conséquent en phase expérimentale. Utilisez-la avec précaution.

Disque /dev/sdc : 500.1 Go, 500107862016 octets, 976773168 secteurs
Unités = secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : gpt


#         Start          End    Size  Type            Name
 1         2048    976773134  465,8G  Linux filesyste  

Disque /dev/mapper/fedora_hdd-swap : 16.8 Go, 16777216000 octets, 32768000 secteurs
Unités = secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 4096 octets
taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets


Disque /dev/mapper/fedora_ssd-root : 33.1 Go, 33080475648 octets, 64610304 secteurs
Unités = secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets


Disque /dev/mapper/fedora_hdd-home : 1973.1 Go, 1973130625024 octets, 3853770752 secteurs
Unités = secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 4096 octets
taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets


Disque /dev/mapper/fedora_hdd-var : 10.5 Go, 10485760000 octets, 20480000 secteurs
Unités = secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 4096 octets
taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets


Disque /dev/sdd : 160.0 Go, 160041885696 octets, 312581808 secteurs
Unités = secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0xcb82698d

Périphérique Amorçage  Début         Fin      Blocs    Id. Système
/dev/sdd1              63   312576704   156288321    7  HPFS/NTFS/exFAT
rapport smartctl
SSD:
smartctl /dev/sda -a
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.11.7-200.fc19.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     SandForce Driven SSDs
Device Model:     Corsair Force GT
Serial Number:    13097904000097950314
LU WWN Device Id: 0 000000 000000000
Firmware Version: 5.06
User Capacity:    120 034 123 776 bytes [120 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS, ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Nov 16 12:37:59 2013 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  48) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x0021)	SCT Status supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   100   100   050    Pre-fail  Always       -       0/2984422
  5 Retired_Block_Count     0x0033   100   100   003    Pre-fail  Always       -       0
  9 Power_On_Hours_and_Msec 0x0032   098   098   000    Old_age   Always       -       2541h+00m+51.960s
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       273
171 Program_Fail_Count      0x0032   000   000   000    Old_age   Always       -       0
172 Erase_Fail_Count        0x0032   000   000   000    Old_age   Always       -       0
174 Unexpect_Power_Loss_Ct  0x0030   000   000   000    Old_age   Offline      -       76
177 Wear_Range_Delta        0x0000   000   000   000    Old_age   Offline      -       0
181 Program_Fail_Count      0x0032   000   000   000    Old_age   Always       -       0
182 Erase_Fail_Count        0x0032   000   000   000    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0022   026   039   000    Old_age   Always       -       26 (Min/Max 15/39)
195 ECC_Uncorr_Error_Count  0x001c   120   120   000    Old_age   Offline      -       0/2984422
196 Reallocated_Event_Count 0x0033   100   100   003    Pre-fail  Always       -       0
201 Unc_Soft_Read_Err_Rate  0x001c   120   120   000    Old_age   Offline      -       0/2984422
204 Soft_ECC_Correct_Rate   0x001c   120   120   000    Old_age   Offline      -       0/2984422
230 Life_Curve_Status       0x0013   100   100   000    Pre-fail  Always       -       100
231 SSD_Life_Left           0x0013   100   100   010    Pre-fail  Always       -       0
233 SandForce_Internal      0x0000   000   000   000    Old_age   Offline      -       730
234 SandForce_Internal      0x0032   000   000   000    Old_age   Always       -       605
241 Lifetime_Writes_GiB     0x0032   000   000   000    Old_age   Always       -       605
242 Lifetime_Reads_GiB      0x0032   000   000   000    Old_age   Always       -       553

SMART Error Log not supported

SMART Self-test Log not supported

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
HDD :
smartctl /dev/sdb -a
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.11.7-200.fc19.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar Green (AF, SATA 6Gb/s)
Device Model:     WDC WD20EARX-00PASB0
Serial Number:    WD-WCAZAJ954315
LU WWN Device Id: 5 0014ee 207a9c4ce
Firmware Version: 51.0AB51
User Capacity:    2 000 398 934 016 bytes [2,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Nov 16 12:38:54 2013 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(41160) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 397) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x3035)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       1
  3 Spin_Up_Time            0x0027   167   159   021    Pre-fail  Always       -       6616
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       357
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   100   253   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   097   097   000    Old_age   Always       -       2684
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       348
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       131
193 Load_Cycle_Count        0x0032   176   176   000    Old_age   Always       -       72019
194 Temperature_Celsius     0x0022   123   112   000    Old_age   Always       -       27
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Dois-je faire une maj de firmware du SSD en bootant sur win7 ? ou cette lenteur est dû à toute autre chose ?
Comme je l'ai dit aussi plus haut, remplace ta nappe SATA vu le nombre d'erreurs. Voir le rapport de dmesg de temps en temps pour voir si il n'y a pas un soucis avec le disque.
Alors après démontage complet de la machine, remplacement des nappes et nettoyage.
J'ai mis le ssd et mon HDD WD de 2TB sur mes deux ports SATA 6Gb/s :

- concernant la partition windows 7 -> aucun soucis de lenteur, il me reste que 30G disponible (merci Microsoft)

- Je n'ai pas encore redémarrer sur fedora...donc à suivre!

Pour la génération du rapport dsmeg quelle commande dois-je utiliser ?
dmesg, le rapport doit se trouver dans /var/log/message.
bon après update, plantage puis un reboot long, tout semble redevenue normal (~10s pour démarrer)
voici le dmesg :
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.11.8-200.fc19.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 4.8.2 20131017 (Red Hat 4.8.2-1) (GCC) ) #1 SMP Wed Nov 13 16:29:59 UTC 2013
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.11.8-200.fc19.x86_64 root=/dev/mapper/fedora_ssd-root ro rd.md=0 rd.dm=0 rd.lvm.lv=fedora_hdd/swap rd.lvm.lv=fedora_ssd/root vconsole.keymap=fr rd.luks=0 vconsole.font=latarcyrheb-sun16 rhgb quiet nouveau.modeset=0 rd.driver.blacklist=nouveau video=vesa:off LANG=fr_FR.UTF-8
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ddfd8fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ddfd9000-0x00000000ddfdbfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ddfdc000-0x00000000ddfdffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ddfe0000-0x00000000de5e4fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000de5e5000-0x00000000de838fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000de839000-0x00000000de845fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000de846000-0x00000000de864fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000de865000-0x00000000de869fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000de86a000-0x00000000de8acfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000de8ad000-0x00000000decbcfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000decbd000-0x00000000deff3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: System manufacturer System Product Name/P8Z77-V LK, BIOS 0210 03/12/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x41f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask C00000000 write-back
[    0.000000]   1 base 400000000 mask FF0000000 write-back
[    0.000000]   2 base 410000000 mask FF8000000 write-back
[    0.000000]   3 base 418000000 mask FFC000000 write-back
[    0.000000]   4 base 41C000000 mask FFE000000 write-back
[    0.000000]   5 base 41E000000 mask FFF000000 write-back
[    0.000000]   6 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcce0-0x000fccef] mapped at [ffff8800000fcce0]
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[    0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
[    0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x41ee00000-0x41effffff]
[    0.000000]  [mem 0x41ee00000-0x41effffff] page 2M
[    0.000000] BRK [0x01fe8000, 0x01fe8fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x41c000000-0x41edfffff]
[    0.000000]  [mem 0x41c000000-0x41edfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff]
[    0.000000]  [mem 0x400000000-0x41bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xddfd8fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xdddfffff] page 2M
[    0.000000]  [mem 0xdde00000-0xddfd8fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xddfdc000-0xddfdffff]
[    0.000000]  [mem 0xddfdc000-0xddfdffff] page 4k
[    0.000000] init_memory_mapping: [mem 0xde8ad000-0xdecbcfff]
[    0.000000]  [mem 0xde8ad000-0xde9fffff] page 4k
[    0.000000]  [mem 0xdea00000-0xdebfffff] page 2M
[    0.000000]  [mem 0xdec00000-0xdecbcfff] page 4k
[    0.000000] BRK [0x01fe9000, 0x01fe9fff] PGTABLE
[    0.000000] BRK [0x01fea000, 0x01feafff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xdeff4000-0xdeffffff]
[    0.000000]  [mem 0xdeff4000-0xdeffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[    0.000000]  [mem 0x100000000-0x3ffffffff] page 2M
[    0.000000] RAMDISK: [mem 0x36dd0000-0x376dffff]
[    0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 00000000de839078 0006C (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 00000000de843850 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 00000000de839170 0A6DD (v02 ALASKA    A M I 00000015 INTL 20051117)
[    0.000000] ACPI: FACS 00000000de863f80 00040
[    0.000000] ACPI: APIC 00000000de843948 00092 (v03 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 00000000de8439e0 0003C (v01 ALASKA    A M I 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000de843a20 00038 (v01 ALASKA    A M I 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 00000000de843a58 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 00000000de843dc8 009AA (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 00000000de844778 00A92 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: DMAR 00000000de845210 00080 (v01 INTEL      SNB  00000001 INTL 00000001)
[    0.000000] ACPI: BGRT 00000000de845290 00038 (v00 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000041effffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x41effffff]
[    0.000000]   NODE_DATA [mem 0x41efdb000-0x41efeefff]
[    0.000000]  [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040e600000-ffff88041e5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x41effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0xddfd8fff]
[    0.000000]   node   0: [mem 0xddfdc000-0xddfdffff]
[    0.000000]   node   0: [mem 0xde8ad000-0xdecbcfff]
[    0.000000]   node   0: [mem 0xdeff4000-0xdeffffff]
[    0.000000]   node   0: [mem 0x100000000-0x41effffff]
[    0.000000] On node 0 totalpages: 4182933
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14160 pages used for memmap
[    0.000000]   DMA32 zone: 906233 pages, LIFO batch:31
[    0.000000]   Normal zone: 51136 pages used for memmap
[    0.000000]   Normal zone: 3272704 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xddfd9000-0xddfdbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xddfe0000-0xde5e4fff]
[    0.000000] PM: Registered nosave memory: [mem 0xde5e5000-0xde838fff]
[    0.000000] PM: Registered nosave memory: [mem 0xde839000-0xde845fff]
[    0.000000] PM: Registered nosave memory: [mem 0xde846000-0xde864fff]
[    0.000000] PM: Registered nosave memory: [mem 0xde865000-0xde869fff]
[    0.000000] PM: Registered nosave memory: [mem 0xde86a000-0xde8acfff]
[    0.000000] PM: Registered nosave memory: [mem 0xdecbd000-0xdeff3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88041ec00000 s85568 r8192 d20928 u262144
[    0.000000] pcpu-alloc: s85568 r8192 d20928 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4117552
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11.8-200.fc19.x86_64 root=/dev/mapper/fedora_ssd-root ro rd.md=0 rd.dm=0 rd.lvm.lv=fedora_hdd/swap rd.lvm.lv=fedora_ssd/root vconsole.keymap=fr rd.luks=0 vconsole.font=latarcyrheb-sun16 rhgb quiet nouveau.modeset=0 rd.driver.blacklist=nouveau video=vesa:off LANG=fr_FR.UTF-8
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 16376668K/16731732K available (6507K kernel code, 990K rwdata, 2868K rodata, 1420K init, 1540K bss, 355064K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:8448 nr_irqs:744 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 67108864 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.001000] tsc: Detected 3417.795 MHz processor
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6835.59 BogoMIPS (lpj=3417795)
[    0.000004] pid_max: default: 32768 minimum: 301
[    0.000024] Security Framework initialized
[    0.000030] SELinux:  Initializing.
[    0.000035] SELinux:  Starting in permissive mode
[    0.000819] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.003749] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.005033] Mount-cache hash table entries: 256
[    0.005160] Initializing cgroup subsys memory
[    0.005167] Initializing cgroup subsys devices
[    0.005168] Initializing cgroup subsys freezer
[    0.005169] Initializing cgroup subsys net_cls
[    0.005170] Initializing cgroup subsys blkio
[    0.005171] Initializing cgroup subsys perf_event
[    0.005187] CPU: Physical Processor ID: 0
[    0.005188] CPU: Processor Core ID: 0
[    0.005192] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.005454] mce: CPU supports 9 MCE banks
[    0.005463] CPU0: Thermal monitoring enabled (TM1)
[    0.005470] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 1
[    0.005560] Freeing SMP alternatives memory: 24K (ffffffff81e5c000 - ffffffff81e62000)
[    0.006395] ACPI: Core revision 20130517
[    0.009747] ACPI: All ACPI Tables successfully acquired
[    0.079628] ftrace: allocating 25153 entries in 99 pages
[    0.088352] dmar: Host address width 36
[    0.088353] dmar: DRHD base: 0x000000fed90000 flags: 0x1
[    0.088358] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.088359] dmar: RMRR base: 0x000000de55c000 end: 0x000000de578fff
[    0.088428] IOAPIC id 2 under DRHD base  0xfed90000 IOMMU 0
[    0.088429] HPET id 0 under DRHD base 0xfed90000
[    0.088483] Enabled IRQ remapping in x2apic mode
[    0.088484] Enabling x2apic
[    0.088485] Enabled x2apic
[    0.088488] Switched APIC routing to cluster x2apic.
[    0.088892] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.098907] smpboot: CPU0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz (fam: 06, model: 3a, stepping: 09)
[    0.098912] TSC deadline timer enabled
[    0.098917] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.098921] ... version:                3
[    0.098922] ... bit width:              48
[    0.098922] ... generic registers:      4
[    0.098923] ... value mask:             0000ffffffffffff
[    0.098924] ... max period:             0000ffffffffffff
[    0.098924] ... fixed-purpose events:   3
[    0.098925] ... event mask:             000000070000000f
[    0.113118] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.099716] smpboot: Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 OK
[    0.194044] Brought up 8 CPUs
[    0.194047] smpboot: Total of 8 processors activated (54684.72 BogoMIPS)
[    0.200398] devtmpfs: initialized
[    0.200558] PM: Registering ACPI NVS region [mem 0xde5e5000-0xde838fff] (2441216 bytes)
[    0.200581] PM: Registering ACPI NVS region [mem 0xde846000-0xde864fff] (126976 bytes)
[    0.200584] PM: Registering ACPI NVS region [mem 0xde86a000-0xde8acfff] (274432 bytes)
[    0.201095] atomic64 test passed for x86-64 platform with CX8 and with SSE
[    0.201119] RTC time: 22:07:19, date: 11/17/13
[    0.201146] NET: Registered protocol family 16
[    0.201278] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.201279] ACPI: bus type PCI registered
[    0.201281] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.201315] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.201317] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.206206] PCI: Using configuration type 1 for base access
[    0.206772] bio: create slab <bio-0> at 0
[    0.206854] ACPI: Added _OSI(Module Device)
[    0.206855] ACPI: Added _OSI(Processor Device)
[    0.206856] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.206857] ACPI: Added _OSI(Processor Aggregator Device)
[    0.207707] ACPI: EC: Look up EC in DSDT
[    0.208670] ACPI: Executed 1 blocks of module-level executable AML code
[    0.214516] ACPI: SSDT 00000000de592018 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.214730] ACPI: Dynamic OEM Table Load:
[    0.214731] ACPI: SSDT           (null) 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.219425] ACPI: SSDT 00000000de593a98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.219657] ACPI: Dynamic OEM Table Load:
[    0.219658] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.224358] ACPI: SSDT 00000000de594c18 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.224567] ACPI: Dynamic OEM Table Load:
[    0.224568] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.230071] ACPI: Interpreter enabled
[    0.230078] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[    0.230087] ACPI: (supports S0 S1 S3 S4 S5)
[    0.230088] ACPI: Using IOAPIC for interrupt routing
[    0.230104] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.230175] ACPI: No dock devices found.
[    0.233966] ACPI: Power Resource [FN00] (off)
[    0.234014] ACPI: Power Resource [FN01] (off)
[    0.234060] ACPI: Power Resource [FN02] (off)
[    0.234106] ACPI: Power Resource [FN03] (off)
[    0.234153] ACPI: Power Resource [FN04] (off)
[    0.234551] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.234628] \_SB_.PCI0:_OSC invalid UUID
[    0.234629] _OSC request data:1 8 0 
[    0.234659] \_SB_.PCI0:_OSC invalid UUID
[    0.234660] _OSC request data:1 1f 0 
[    0.234662] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.234663] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.234990] PCI host bridge to bus 0000:00
[    0.234992] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.234994] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.234995] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.234996] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.234997] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.234998] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.234999] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.235000] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.235001] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.235002] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.235003] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
[    0.235009] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[    0.235065] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.235087] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.235113] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.235156] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.235177] pci 0000:00:14.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit]
[    0.235241] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.235270] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.235294] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.235317] pci 0000:00:16.0: reg 0x10: [mem 0xf721a000-0xf721a00f 64bit]
[    0.235386] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.235444] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.235463] pci 0000:00:1a.0: reg 0x10: [mem 0xf7218000-0xf72183ff]
[    0.235546] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.235585] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.235610] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.235623] pci 0000:00:1b.0: reg 0x10: [mem 0xf7210000-0xf7213fff 64bit]
[    0.235684] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.235715] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.235741] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.235867] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.235909] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.235932] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[    0.236003] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.236036] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.236056] pci 0000:00:1c.5: [8086:244e] type 01 class 0x060401
[    0.236126] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.236159] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.236181] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
[    0.236251] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.236284] pci 0000:00:1c.7: System wakeup disabled by ACPI
[    0.236308] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.236329] pci 0000:00:1d.0: reg 0x10: [mem 0xf7217000-0xf72173ff]
[    0.236412] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.236451] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.236474] pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
[    0.236617] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
[    0.236633] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
[    0.236639] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
[    0.236645] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
[    0.236652] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
[    0.236658] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.236665] pci 0000:00:1f.2: reg 0x24: [mem 0xf7216000-0xf72167ff]
[    0.236704] pci 0000:00:1f.2: PME# supported from D3hot
[    0.236748] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.236761] pci 0000:00:1f.3: reg 0x10: [mem 0xf7215000-0xf72150ff 64bit]
[    0.236779] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.236860] pci 0000:01:00.0: [10de:0fc1] type 00 class 0x030000
[    0.236868] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.236876] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.236884] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.236890] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.236896] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.236950] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
[    0.236958] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[    0.238343] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.238347] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.238350] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.238355] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.238446] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.238528] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.238547] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.238579] pci 0000:03:00.0: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
[    0.238599] pci 0000:03:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[    0.238686] pci 0000:03:00.0: supports D1 D2
[    0.238687] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.238719] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.240353] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.240358] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.240367] pci 0000:00:1c.4:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.240445] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
[    0.240561] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.240577] pci 0000:00:1c.5: PCI bridge to [bus 04-05] (subtractive decode)
[    0.240586] pci 0000:00:1c.5:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.240587] pci 0000:00:1c.5:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.240588] pci 0000:00:1c.5:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.240589] pci 0000:00:1c.5:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.240590] pci 0000:00:1c.5:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.240591] pci 0000:00:1c.5:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.240592] pci 0000:00:1c.5:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.240593] pci 0000:00:1c.5:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.240594] pci 0000:00:1c.5:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.240595] pci 0000:00:1c.5:   bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
[    0.240712] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[    0.240732] pci 0000:04:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.240733] pci 0000:04:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.240734] pci 0000:04:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.240735] pci 0000:04:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.240737] pci 0000:04:00.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.240738] pci 0000:04:00.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.240739] pci 0000:04:00.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.240740] pci 0000:04:00.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.240741] pci 0000:04:00.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.240742] pci 0000:04:00.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.240743] pci 0000:04:00.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.240744] pci 0000:04:00.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.240745] pci 0000:04:00.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.240746] pci 0000:04:00.0:   bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
[    0.240828] pci 0000:06:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.240855] pci 0000:06:00.0: reg 0x10: [mem 0xf7100000-0xf7107fff 64bit]
[    0.240995] pci 0000:06:00.0: PME# supported from D3hot D3cold
[    0.241025] pci 0000:06:00.0: System wakeup disabled by ACPI
[    0.242359] pci 0000:00:1c.7: PCI bridge to [bus 06]
[    0.242366] pci 0000:00:1c.7:   bridge window [mem 0xf7100000-0xf71fffff]
[    0.242696] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.242730] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.242762] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 10 11 12 14 15)
[    0.242794] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.242826] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.242859] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15)
[    0.242892] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 *14 15)
[    0.242926] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.243072] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.243077] ACPI: \_SB_.PCI0: notify handler is installed
[    0.243110] Found 1 acpi root devices
[    0.243160] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.243161] vgaarb: loaded
[    0.243161] vgaarb: bridge control possible 0000:01:00.0
[    0.243200] SCSI subsystem initialized
[    0.243201] ACPI: bus type ATA registered
[    0.243225] libata version 3.00 loaded.
[    0.243238] ACPI: bus type USB registered
[    0.243246] usbcore: registered new interface driver usbfs
[    0.243250] usbcore: registered new interface driver hub
[    0.243262] usbcore: registered new device driver usb
[    0.243302] PCI: Using ACPI for IRQ routing
[    0.244656] PCI: pci_cache_line_size set to 64 bytes
[    0.244703] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.244704] e820: reserve RAM buffer [mem 0xddfd9000-0xdfffffff]
[    0.244705] e820: reserve RAM buffer [mem 0xddfe0000-0xdfffffff]
[    0.244706] e820: reserve RAM buffer [mem 0xdecbd000-0xdfffffff]
[    0.244707] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[    0.244708] e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
[    0.244758] NetLabel: Initializing
[    0.244759] NetLabel:  domain hash size = 128
[    0.244760] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.244766] NetLabel:  unlabeled traffic allowed by default
[    0.244812] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.244815] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.246837] Switched to clocksource hpet
[    0.249922] pnp: PnP ACPI init
[    0.249929] ACPI: bus type PNP registered
[    0.249968] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.249971] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.249978] pnp 00:01: [dma 4]
[    0.249986] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.249998] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.250052] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.250075] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.250077] system 00:04: [io  0x0200-0x020f] has been reserved
[    0.250078] system 00:04: [io  0xffff] has been reserved
[    0.250080] system 00:04: [io  0xffff] has been reserved
[    0.250081] system 00:04: [io  0x0400-0x0453] could not be reserved
[    0.250083] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.250084] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.250085] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.250086] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.250105] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.250130] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.250132] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.250181] system 00:07: [io  0x0290-0x029f] has been reserved
[    0.250183] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.250208] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.250210] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.250226] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.250359] pnp 00:0a: [dma 0 disabled]
[    0.250387] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.250517] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.250519] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.250520] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.250521] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.250522] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.250524] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.250525] system 00:0b: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.250526] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.250527] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[    0.250529] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.250530] system 00:0b: [mem 0xf2200000-0xf2200fff] has been reserved
[    0.250531] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.250605] pnp: PnP ACPI: found 12 devices
[    0.250606] ACPI: bus type PNP unregistered
[    0.256309] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.256312] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[    0.256313] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[    0.256345] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.256347] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.256348] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.256351] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf2300000-0xf24fffff]
[    0.256353] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf2500000-0xf26fffff 64bit pref]
[    0.256355] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.256356] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.256358] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.256360] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.256362] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.256364] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.256367] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.256372] pci 0000:00:1c.0:   bridge window [mem 0xf2300000-0xf24fffff]
[    0.256375] pci 0000:00:1c.0:   bridge window [mem 0xf2500000-0xf26fffff 64bit pref]
[    0.256382] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.256384] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.256390] pci 0000:00:1c.4:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.256395] pci 0000:04:00.0: PCI bridge to [bus 05]
[    0.256414] pci 0000:00:1c.5: PCI bridge to [bus 04-05]
[    0.256423] pci 0000:00:1c.7: PCI bridge to [bus 06]
[    0.256427] pci 0000:00:1c.7:   bridge window [mem 0xf7100000-0xf71fffff]
[    0.256610] pci 0000:04:00.0: setting latency timer to 64
[    0.256652] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.256653] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.256654] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.256655] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.256656] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.256657] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.256659] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    0.256660] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    0.256661] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    0.256662] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
[    0.256663] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.256664] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.256665] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.256666] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.256667] pci_bus 0000:02: resource 1 [mem 0xf2300000-0xf24fffff]
[    0.256668] pci_bus 0000:02: resource 2 [mem 0xf2500000-0xf26fffff 64bit pref]
[    0.256669] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.256671] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.256672] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.256673] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.256674] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.256675] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.256676] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.256677] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.256678] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff]
[    0.256679] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff]
[    0.256680] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff]
[    0.256681] pci_bus 0000:04: resource 13 [mem 0xe0000000-0xfeafffff]
[    0.256682] pci_bus 0000:05: resource 8 [io  0x0000-0x0cf7]
[    0.256683] pci_bus 0000:05: resource 9 [io  0x0d00-0xffff]
[    0.256684] pci_bus 0000:05: resource 10 [mem 0x000a0000-0x000bffff]
[    0.256685] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.256687] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.256688] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.256689] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff]
[    0.256690] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.256691] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.256692] pci_bus 0000:05: resource 17 [mem 0xe0000000-0xfeafffff]
[    0.256693] pci_bus 0000:06: resource 1 [mem 0xf7100000-0xf71fffff]
[    0.256714] NET: Registered protocol family 2
[    0.256893] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[    0.257157] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.257268] TCP: Hash tables configured (established 131072 bind 65536)
[    0.257279] TCP: reno registered
[    0.257292] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.257333] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.257403] NET: Registered protocol family 1
[    0.288980] pci 0000:01:00.0: Boot video device
[    0.289046] PCI: CLS 64 bytes, default 64
[    0.289070] Unpacking initramfs...
[    0.391620] Freeing initrd memory: 9280K (ffff880036dd0000 - ffff8800376e0000)
[    0.391628] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.391630] software IO TLB [mem 0xd9fd9000-0xddfd9000] (64MB) mapped at [ffff8800d9fd9000-ffff8800ddfd8fff]
[    0.393455] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    0.393684] Initialise system trusted keyring
[    0.393711] audit: initializing netlink socket (disabled)
[    0.393719] type=2000 audit(1384726039.303:1): initialized
[    0.409197] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.410131] zbud: loaded
[    0.410235] VFS: Disk quotas dquot_6.5.2
[    0.410257] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.410471] msgmni has been set to 32003
[    0.410504] SELinux:  Registering netfilter hooks
[    0.411016] alg: No test for stdrng (krng)
[    0.411020] NET: Registered protocol family 38
[    0.411022] Key type asymmetric registered
[    0.411023] Asymmetric key parser 'x509' registered
[    0.411024] Asymmetric key parser 'pefile' registered
[    0.411041] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.411088] io scheduler noop registered
[    0.411089] io scheduler deadline registered
[    0.411104] io scheduler cfq registered (default)
[    0.411168] pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
[    0.411331] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.411339] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.411375] intel_idle: MWAIT substates: 0x1120
[    0.411376] intel_idle: v0.4 model 0x3A
[    0.411377] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.411445] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.411448] ACPI: Power Button [PWRB]
[    0.411467] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.411468] ACPI: Power Button [PWRF]
[    0.411513] ACPI: Fan [FAN0] (off)
[    0.411528] ACPI: Fan [FAN1] (off)
[    0.411543] ACPI: Fan [FAN2] (off)
[    0.411557] ACPI: Fan [FAN3] (off)
[    0.411571] ACPI: Fan [FAN4] (off)
[    0.411602] ACPI: Requesting acpi_cpufreq
[    0.421295] thermal LNXTHERM:00: registered as thermal_zone0
[    0.421296] ACPI: Thermal Zone [TZ00] (28 C)
[    0.421440] thermal LNXTHERM:01: registered as thermal_zone1
[    0.421441] ACPI: Thermal Zone [TZ01] (30 C)
[    0.421455] GHES: HEST is not enabled!
[    0.421492] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.442088] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.442399] Non-volatile memory driver v1.3
[    0.442401] Linux agpgart interface v0.103
[    0.442792] loop: module loaded
[    0.442825] ahci 0000:00:1f.2: version 3.0
[    0.442895] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    0.453135] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x2b impl SATA mode
[    0.453137] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    0.453139] ahci 0000:00:1f.2: setting latency timer to 64
[    0.459331] scsi0 : ahci
[    0.459374] scsi1 : ahci
[    0.459406] scsi2 : ahci
[    0.459438] scsi3 : ahci
[    0.459469] scsi4 : ahci
[    0.459502] scsi5 : ahci
[    0.459546] ata1: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216100 irq 42
[    0.459548] ata2: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216180 irq 42
[    0.459549] ata3: DUMMY
[    0.459550] ata4: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216280 irq 42
[    0.459551] ata5: DUMMY
[    0.459552] ata6: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216380 irq 42
[    0.459589] libphy: Fixed MDIO Bus: probed
[    0.459626] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.459628] ehci-pci: EHCI PCI platform driver
[    0.459711] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    0.459717] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.459756] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.459767] ehci-pci 0000:00:1a.0: debug port 2
[    0.463678] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.463689] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7218000
[    0.469137] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.469151] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.469153] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.469154] usb usb1: Product: EHCI Host Controller
[    0.469155] usb usb1: Manufacturer: Linux 3.11.8-200.fc19.x86_64 ehci_hcd
[    0.469156] usb usb1: SerialNumber: 0000:00:1a.0
[    0.469215] hub 1-0:1.0: USB hub found
[    0.469217] hub 1-0:1.0: 2 ports detected
[    0.469329] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    0.469332] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.469357] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.469367] ehci-pci 0000:00:1d.0: debug port 2
[    0.473273] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.473276] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7217000
[    0.479150] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.479157] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.479158] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.479159] usb usb2: Product: EHCI Host Controller
[    0.479160] usb usb2: Manufacturer: Linux 3.11.8-200.fc19.x86_64 ehci_hcd
[    0.479161] usb usb2: SerialNumber: 0000:00:1d.0
[    0.479208] hub 2-0:1.0: USB hub found
[    0.479211] hub 2-0:1.0: 2 ports detected
[    0.479265] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.479266] ohci-pci: OHCI PCI platform driver
[    0.479270] uhci_hcd: USB Universal Host Controller Interface driver
[    0.479334] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    0.479336] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.479360] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.479434] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.479450] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
[    0.479482] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.479483] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.479484] usb usb3: Product: xHCI Host Controller
[    0.479485] usb usb3: Manufacturer: Linux 3.11.8-200.fc19.x86_64 xhci_hcd
[    0.479486] usb usb3: SerialNumber: 0000:00:14.0
[    0.479524] xHCI xhci_add_endpoint called for root hub
[    0.479525] xHCI xhci_check_bandwidth called for root hub
[    0.479537] hub 3-0:1.0: USB hub found
[    0.479542] hub 3-0:1.0: 4 ports detected
[    0.479723] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.479743] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.479756] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.479757] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.479758] usb usb4: Product: xHCI Host Controller
[    0.479759] usb usb4: Manufacturer: Linux 3.11.8-200.fc19.x86_64 xhci_hcd
[    0.479760] usb usb4: SerialNumber: 0000:00:14.0
[    0.479793] xHCI xhci_add_endpoint called for root hub
[    0.479794] xHCI xhci_check_bandwidth called for root hub
[    0.479804] hub 4-0:1.0: USB hub found
[    0.479809] hub 4-0:1.0: 4 ports detected
[    0.484188] xhci_hcd 0000:06:00.0: xHCI Host Controller
[    0.484213] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
[    0.545434] xhci_hcd 0000:06:00.0: irq 44 for MSI/MSI-X
[    0.545438] xhci_hcd 0000:06:00.0: irq 45 for MSI/MSI-X
[    0.545442] xhci_hcd 0000:06:00.0: irq 46 for MSI/MSI-X
[    0.545446] xhci_hcd 0000:06:00.0: irq 47 for MSI/MSI-X
[    0.545449] xhci_hcd 0000:06:00.0: irq 48 for MSI/MSI-X
[    0.545453] xhci_hcd 0000:06:00.0: irq 49 for MSI/MSI-X
[    0.545456] xhci_hcd 0000:06:00.0: irq 50 for MSI/MSI-X
[    0.545460] xhci_hcd 0000:06:00.0: irq 51 for MSI/MSI-X
[    0.545566] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    0.545567] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.545568] usb usb5: Product: xHCI Host Controller
[    0.545569] usb usb5: Manufacturer: Linux 3.11.8-200.fc19.x86_64 xhci_hcd
[    0.545570] usb usb5: SerialNumber: 0000:06:00.0
[    0.545607] xHCI xhci_add_endpoint called for root hub
[    0.545608] xHCI xhci_check_bandwidth called for root hub
[    0.545620] hub 5-0:1.0: USB hub found
[    0.545625] hub 5-0:1.0: 2 ports detected
[    0.545662] xhci_hcd 0000:06:00.0: xHCI Host Controller
[    0.545681] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
[    0.545710] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    0.545711] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.545712] usb usb6: Product: xHCI Host Controller
[    0.545713] usb usb6: Manufacturer: Linux 3.11.8-200.fc19.x86_64 xhci_hcd
[    0.545714] usb usb6: SerialNumber: 0000:06:00.0
[    0.545746] xHCI xhci_add_endpoint called for root hub
[    0.545746] xHCI xhci_check_bandwidth called for root hub
[    0.545756] hub 6-0:1.0: USB hub found
[    0.545761] hub 6-0:1.0: 2 ports detected
[    0.550260] usbcore: registered new interface driver usbserial
[    0.550264] usbcore: registered new interface driver usbserial_generic
[    0.550267] usbserial: USB Serial support registered for generic
[    0.550284] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.552586] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.552589] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.552634] mousedev: PS/2 mouse device common for all mice
[    0.552728] rtc_cmos 00:05: RTC can wake from S4
[    0.552833] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.552858] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.552894] device-mapper: uevent: version 1.0.3
[    0.552926] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[    0.552947] Intel P-state driver initializing.
[    0.552954] Intel pstate controlling: cpu 0
[    0.552964] Intel pstate controlling: cpu 1
[    0.552970] Intel pstate controlling: cpu 2
[    0.552976] Intel pstate controlling: cpu 3
[    0.552983] Intel pstate controlling: cpu 4
[    0.552991] Intel pstate controlling: cpu 5
[    0.552997] Intel pstate controlling: cpu 6
[    0.553004] Intel pstate controlling: cpu 7
[    0.553089] cpuidle: using governor menu
[    0.553286] hidraw: raw HID events driver (C) Jiri Kosina
[    0.553329] usbcore: registered new interface driver usbhid
[    0.553330] usbhid: USB HID core driver
[    0.553349] drop_monitor: Initializing network drop monitor service
[    0.553397] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.553423] TCP: cubic registered
[    0.553427] Initializing XFRM netlink socket
[    0.553490] NET: Registered protocol family 10
[    0.553607] mip6: Mobile IPv6
[    0.553609] NET: Registered protocol family 17
[    0.553796] PM: Hibernation image not present or could not be loaded.
[    0.553798] Loading compiled-in X.509 certificates
[    0.554370] Loaded X.509 cert 'Fedora kernel signing key: 1c46e1fb8ef3f2eae3cf2e701be892c1fec146b3'
[    0.554375] registered taskstats version 1
[    0.555032]   Magic number: 5:707:148
[    0.555038] ata_port ata5: hash matches
[    0.555039]  ata5: hash matches
[    0.555062] acpi device:19: hash matches
[    0.555119] rtc_cmos 00:05: setting system clock to 2013-11-17 22:07:19 UTC (1384726039)
[    0.764554] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.764573] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.764590] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.764606] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.765546] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[    0.765553] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff880408495c08), AE_NOT_FOUND (20130517/psparse-536)
[    0.765885] ata6.00: ATA-8: ST3500320AS, SD15, max UDMA/133
[    0.765888] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    0.767417] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[    0.767420] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff880408495b18), AE_NOT_FOUND (20130517/psparse-536)
[    0.767425] ata4.00: ATAPI: HL-DT-ST BDDVDRW CH10LS28, 1.00, max UDMA/133
[    0.767460] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[    0.767464] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff880408495c08), AE_NOT_FOUND (20130517/psparse-536)
[    0.767905] ata6.00: configured for UDMA/133
[    0.771561] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.771574] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[    0.771578] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff880408495b18), AE_NOT_FOUND (20130517/psparse-536)
[    0.771586] ata4.00: configured for UDMA/133
[    0.771667] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[    0.771672] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff8804084959b0), AE_NOT_FOUND (20130517/psparse-536)
[    0.772355] ata1.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
[    0.772358] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.775616] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[    0.775620] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff880408495a28), AE_NOT_FOUND (20130517/psparse-536)
[    0.776524] ata2.00: ATA-8: Corsair Force GT, 5.06, max UDMA/133
[    0.776526] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.779504] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[    0.779508] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff8804084959b0), AE_NOT_FOUND (20130517/psparse-536)
[    0.780387] ata1.00: configured for UDMA/133
[    0.780552] scsi 0:0:0:0: Direct-Access     ATA      WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
[    0.780669] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.780695] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    0.780697] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.780786] sd 0:0:0:0: [sda] Write Protect is off
[    0.780788] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.780887] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.785600] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[    0.785604] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff880408495a28), AE_NOT_FOUND (20130517/psparse-536)
[    0.786428] ata2.00: configured for UDMA/133
[    0.786565] scsi 1:0:0:0: Direct-Access     ATA      Corsair Force GT 5.06 PQ: 0 ANSI: 5
[    0.786686] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    0.786709] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    0.786975] sd 1:0:0:0: [sdb] Write Protect is off
[    0.786978] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    0.787049] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.787132]  sda: sda1
[    0.787477] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.787827]  sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
[    0.788224] sd 1:0:0:0: [sdb] Attached SCSI disk
[    0.790004] scsi 3:0:0:0: CD-ROM            HL-DT-ST BDDVDRW CH10LS28 1.00 PQ: 0 ANSI: 5
[    0.794280] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.794284] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.794409] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    0.794448] sr 3:0:0:0: Attached scsi generic sg2 type 5
[    0.794526] scsi 5:0:0:0: Direct-Access     ATA      ST3500320AS      SD15 PQ: 0 ANSI: 5
[    0.794630] sd 5:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    0.794658] sd 5:0:0:0: [sdc] Write Protect is off
[    0.794660] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    0.794672] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.794681] sd 5:0:0:0: Attached scsi generic sg3 type 0
[    0.855122]  sdc: sdc1
[    0.855340] sd 5:0:0:0: [sdc] Attached SCSI disk
[    0.855937] Freeing unused kernel memory: 1420K (ffffffff81cf9000 - ffffffff81e5c000)
[    0.855938] Write protecting the kernel read-only data: 12288k
[    0.858268] Freeing unused kernel memory: 1672K (ffff88000165e000 - ffff880001800000)
[    0.859856] Freeing unused kernel memory: 1228K (ffff880001acd000 - ffff880001c00000)
[    0.861958] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[    0.863167] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    0.863292] systemd[1]: Running in initial RAM disk.
[    0.863433] systemd[1]: Set hostname to <asus-core.homeroy>.
[    0.866807] systemd[1]: Expecting device dev-disk-by\x2duuid-94440ffb\x2dcf11\x2d4053\x2dac3d\x2daee151c5af32.device...
[    0.866816] systemd[1]: Expecting device dev-mapper-fedora_hdd\x2dswap.device...
[    0.866822] systemd[1]: Expecting device dev-mapper-fedora_ssd\x2droot.device...
[    0.866828] systemd[1]: Starting Timers.
[    0.866836] systemd[1]: Reached target Timers.
[    0.866871] systemd[1]: Starting udev Kernel Socket.
[    0.866890] systemd[1]: Listening on udev Kernel Socket.
[    0.866918] systemd[1]: Starting udev Control Socket.
[    0.866937] systemd[1]: Listening on udev Control Socket.
[    0.866944] systemd[1]: Starting Journal Socket.
[    0.866968] systemd[1]: Listening on Journal Socket.
[    0.867068] systemd[1]: Starting dracut cmdline hook...
[    0.867318] systemd[1]: Starting Sockets.
[    0.867327] systemd[1]: Reached target Sockets.
[    0.867333] systemd[1]: Starting Journal Service...
[    0.867547] systemd[1]: Started Journal Service.
[    0.867735] systemd[1]: Started Load Kernel Modules.
[    0.867742] systemd[1]: Starting Swap.
[    0.867749] systemd[1]: Reached target Swap.
[    0.867755] systemd[1]: Starting Local File Systems.
[    0.867760] systemd[1]: Reached target Local File Systems.
[    0.870309] systemd-journald[119]: Vacuuming done, freed 0 bytes
[    0.886036] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    0.886038] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.886311] hub 1-1:1.0: USB hub found
[    0.886405] hub 1-1:1.0: 6 ports detected
[    0.939153] systemd-udevd[208]: starting version 204
[    0.947018] wmi: Mapper loaded
[    0.988848] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.103323] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.103336] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.103599] hub 2-1:1.0: USB hub found
[    1.103699] hub 2-1:1.0: 8 ports detected
[    1.258226] usb 5-2: new high-speed USB device number 2 using xhci_hcd
[    1.272576] usb 5-2: New USB device found, idVendor=1a40, idProduct=0101
[    1.272578] usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.272580] usb 5-2: Product: USB 2.0 Hub
[    1.273333] hub 5-2:1.0: USB hub found
[    1.273394] hub 5-2:1.0: 4 ports detected
[    1.346425] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    1.393402] tsc: Refined TSC clocksource calibration: 3417.824 MHz
[    1.433101] usb 1-1.1: New USB device found, idVendor=13fd, idProduct=1340
[    1.433106] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.433108] usb 1-1.1: Product: External        
[    1.433110] usb 1-1.1: Manufacturer: Generic 
[    1.433112] usb 1-1.1: SerialNumber: 354D413333505A4420202020
[    1.435695] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[    1.435816] scsi6 : usb-storage 1-1.1:1.0
[    1.435919] usbcore: registered new interface driver usb-storage
[    1.506604] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[    1.516894] bio: create slab <bio-1> at 1
[    1.753153] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    1.756048] usb 2-1.5: New USB device found, idVendor=07d1, idProduct=3c07
[    1.756050] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.756052] usb 2-1.5: Product: 802.11 bg WLAN
[    1.756053] usb 2-1.5: Manufacturer: Ralink
[    1.786460] systemd-journald[119]: Received SIGTERM
[    1.829037] usb 2-1.6: new full-speed USB device number 4 using ehci-pci
[    1.917134] usb 2-1.6: New USB device found, idVendor=046d, idProduct=c52e
[    1.917138] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.917140] usb 2-1.6: Product: USB Receiver
[    1.917141] usb 2-1.6: Manufacturer: Logitech
[    1.918635] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input2
[    1.918756] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.6/input0
[    1.920923] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/input/input3
[    1.921143] hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.6/input1
[    1.931924] SELinux: 2048 avtab hash slots, 95731 rules.
[    1.939495] SELinux: 2048 avtab hash slots, 95731 rules.
[    1.994201] usb 5-2.1: new high-speed USB device number 3 using xhci_hcd
[    2.025702] SELinux:  8 users, 82 roles, 4552 types, 259 bools, 1 sens, 1024 cats
[    2.025705] SELinux:  83 classes, 95731 rules
[    2.028227] SELinux:  Completing initialization.
[    2.028228] SELinux:  Setting up existing superblocks.
[    2.028232] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    2.028235] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[    2.028241] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[    2.028244] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[    2.028249] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    2.028257] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[    2.028733] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[    2.028736] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[    2.029109] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[    2.029111] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[    2.029112] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[    2.029120] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[    2.029125] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[    2.029128] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[    2.029134] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    2.029310] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[    2.029311] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    2.029314] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    2.029355] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    2.029371] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.029375] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
[    2.029376] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.029379] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.029389] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.029393] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.029394] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.029396] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.029398] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.029401] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    2.029407] SELinux: initialized (dev dm-0, type ext4), uses xattr
[    2.048150] type=1403 audit(1384722440.989:2): policy loaded auid=4294967295 ses=4294967295
[    2.051772] systemd[1]: Successfully loaded SELinux policy in 225.272ms.
[    2.059940] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[    2.076432] systemd[1]: Relabelled /dev and /run in 12.811ms.
[    2.097507] LVM: Logical Volume autoactivation enabled.
[    2.097510] LVM: Activation generator successfully completed.
[    2.147303] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[    2.149516] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[    2.150945] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    2.177238] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[    2.177919] systemd-journald[393]: Vacuuming done, freed 0 bytes
[    2.180834] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
[    2.185048] RPC: Registered named UNIX socket transport module.
[    2.185050] RPC: Registered udp transport module.
[    2.185051] RPC: Registered tcp transport module.
[    2.185051] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.187304] EXT4-fs (dm-0): re-mounted. Opts: discard
[    2.197988] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    2.198534] SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
[    2.199052] usb 5-2.1: New USB device found, idVendor=048d, idProduct=1336
[    2.199055] usb 5-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.199056] usb 5-2.1: Product: Mass Storage Device
[    2.199058] usb 5-2.1: Manufacturer: Generic   
[    2.199059] usb 5-2.1: SerialNumber: 00000000000006
[    2.199818] usb-storage 5-2.1:1.0: USB Mass Storage device detected
[    2.199923] scsi7 : usb-storage 5-2.1:1.0
[    2.221742] systemd-udevd[427]: starting version 204
[    2.230597] systemd-udevd[427]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/kino.rules:23
[    2.230603] systemd-udevd[427]: invalid rule '/etc/udev/rules.d/kino.rules:23'
[    2.230609] systemd-udevd[427]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/kino.rules:25
[    2.230613] systemd-udevd[427]: invalid rule '/etc/udev/rules.d/kino.rules:25'
[    2.251569] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.254005] mei_me 0000:00:16.0: setting latency timer to 64
[    2.254037] mei_me 0000:00:16.0: irq 52 for MSI/MSI-X
[    2.260074] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.260081] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.260321] r8169 0000:03:00.0: irq 53 for MSI/MSI-X
[    2.260456] r8169 0000:03:00.0 eth0: RTL8168f/8111f at 0xffffc90001836000, 10:bf:48:84:d6:42, XID 08000800 IRQ 53
[    2.260458] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.261763] [drm] Initialized drm 1.1.0 20060810
[    2.262659] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
[    2.262663] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.262666] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[    2.262668] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.262668] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[    2.262670] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.262670] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.269748] ACPI Warning: 0x000000000000f000-0x000000000000f01f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130517/utaddress-251)
[    2.269752] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.272564] usb 5-2.4: new high-speed USB device number 4 using xhci_hcd
[    2.273579] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0xc
[    2.282040] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0xc
[    2.282481] microcode: CPU0 updated to revision 0x19, date = 2013-06-13
[    2.282488] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0xc
[    2.282511] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0xc
[    2.282729] microcode: CPU1 updated to revision 0x19, date = 2013-06-13
[    2.282914] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0xc
[    2.282936] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0xc
[    2.283149] microcode: CPU2 updated to revision 0x19, date = 2013-06-13
[    2.283153] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0xc
[    2.283167] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0xc
[    2.283375] microcode: CPU3 updated to revision 0x19, date = 2013-06-13
[    2.283380] microcode: CPU4 sig=0x306a9, pf=0x2, revision=0xc
[    2.283401] microcode: CPU4 sig=0x306a9, pf=0x2, revision=0xc
[    2.283615] microcode: CPU4 updated to revision 0x19, date = 2013-06-13
[    2.284208] microcode: CPU5 sig=0x306a9, pf=0x2, revision=0xc
[    2.284224] microcode: CPU5 sig=0x306a9, pf=0x2, revision=0xc
[    2.284431] microcode: CPU5 updated to revision 0x19, date = 2013-06-13
[    2.284436] microcode: CPU6 sig=0x306a9, pf=0x2, revision=0xc
[    2.284456] microcode: CPU6 sig=0x306a9, pf=0x2, revision=0xc
[    2.284669] microcode: CPU6 updated to revision 0x19, date = 2013-06-13
[    2.284778] microcode: CPU7 sig=0x306a9, pf=0x2, revision=0xc
[    2.284795] microcode: CPU7 sig=0x306a9, pf=0x2, revision=0xc
[    2.285009] microcode: CPU7 updated to revision 0x19, date = 2013-06-13
[    2.285050] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    2.288862] snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
[    2.289266] usb 5-2.4: New USB device found, idVendor=152d, idProduct=2329
[    2.289268] usb 5-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[    2.289270] usb 5-2.4: Product: USB to ATA/ATAPI bridge
[    2.289271] usb 5-2.4: Manufacturer: JMicron
[    2.289273] usb 5-2.4: SerialNumber: DE1AC046006F
[    2.290307] usb-storage 5-2.4:1.0: USB Mass Storage device detected
[    2.290323] usb-storage 5-2.4:1.0: Quirks match for vid 152d pid 2329: 8020
[    2.291185] scsi8 : usb-storage 5-2.4:1.0
[    2.292915] alg: No test for crc32 (crc32-pclmul)
[    2.304600] ALSA sound/pci/hda/patch_realtek.c:418 SKU: Nid=0x1d sku_cfg=0x4005e601
[    2.304603] ALSA sound/pci/hda/patch_realtek.c:420 SKU: port_connectivity=0x1
[    2.304604] ALSA sound/pci/hda/patch_realtek.c:421 SKU: enable_pcbeep=0x0
[    2.304605] ALSA sound/pci/hda/patch_realtek.c:422 SKU: check_sum=0x00000005
[    2.304606] ALSA sound/pci/hda/patch_realtek.c:423 SKU: customization=0x000000e6
[    2.304607] ALSA sound/pci/hda/patch_realtek.c:424 SKU: external_amp=0x0
[    2.304609] ALSA sound/pci/hda/patch_realtek.c:425 SKU: platform_type=0x0
[    2.304609] ALSA sound/pci/hda/patch_realtek.c:426 SKU: swap=0x0
[    2.304610] ALSA sound/pci/hda/patch_realtek.c:427 SKU: override=0x1
[    2.305056] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    2.305058] ALSA sound/pci/hda/hda_auto_parser.c:397    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.305060] ALSA sound/pci/hda/hda_auto_parser.c:401    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    2.305061] ALSA sound/pci/hda/hda_auto_parser.c:402    mono: mono_out=0x0
[    2.305062] ALSA sound/pci/hda/hda_auto_parser.c:405    dig-out=0x11/0x1e
[    2.305063] ALSA sound/pci/hda/hda_auto_parser.c:406    inputs:
[    2.305065] ALSA sound/pci/hda/hda_auto_parser.c:410      Front Mic=0x19
[    2.305066] ALSA sound/pci/hda/hda_auto_parser.c:410      Rear Mic=0x18
[    2.305068] ALSA sound/pci/hda/hda_auto_parser.c:410      Line=0x1a
[    2.305069] ALSA sound/pci/hda/patch_realtek.c:490 realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[    2.305070] ALSA sound/pci/hda/patch_realtek.c:506 realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892
[    2.309574] asus_wmi: ASUS WMI generic driver loaded
[    2.310723] asus_wmi: Initialization: 0x0
[    2.310742] asus_wmi: BIOS WMI version: 0.9
[    2.310777] asus_wmi: SFUN value: 0x0
[    2.311068] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input4
[    2.311921] asus_wmi: Disabling ACPI video driver
[    2.312533] iTCO_vendor_support: vendor-support=0
[    2.317327] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    2.317372] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[    2.317706] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.318912] cfg80211: Calling CRDA to update world regulatory domain
[    2.321818] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[    2.323350] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    2.323429] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    2.323487] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    2.323546] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    2.323630] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    2.323690] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    2.323739] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    2.324103] hda_intel: Disabling MSI
[    2.324110] ALSA sound/pci/hda/hda_intel.c:3116 0000:01:00.1: Handle VGA-switcheroo audio client
[    2.324148] ALSA sound/pci/hda/hda_intel.c:3593 0000:01:00.1: Disabling 64bit DMA
[    2.328056] cfg80211: World regulatory domain updated:
[    2.328059] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    2.328060] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    2.328060] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    2.328061] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    2.328062] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    2.328062] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    2.329013] nvidia: module license 'NVIDIA' taints kernel.
[    2.329017] Disabling lock debugging due to kernel taint
[    2.329347] Adding 16383996k swap on /dev/mapper/fedora_hdd-swap.  Priority:-1 extents:1 across:16383996k FS
[    2.331372] ALSA sound/pci/hda/hda_intel.c:1748 0000:01:00.1: Enable delay in RIRB handling
[    2.332537] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    2.354692] systemd-udevd[441]: renamed network interface eth0 to p4p1
[    2.392762] usb 2-1.5: reset high-speed USB device number 3 using ehci-pci
[    2.394765] Switched to clocksource tsc
[    2.401240] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: discard
[    2.401367] SELinux: initialized (dev sdb5, type ext4), uses xattr
[    2.439236] scsi 6:0:0:0: Direct-Access     Generic  External         2.10 PQ: 0 ANSI: 4
[    2.439443] sd 6:0:0:0: Attached scsi generic sg4 type 0
[    2.439944] sd 6:0:0:0: [sdd] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.440940] sd 6:0:0:0: [sdd] Write Protect is off
[    2.440942] sd 6:0:0:0: [sdd] Mode Sense: 21 00 00 00
[    2.441939] sd 6:0:0:0: [sdd] No Caching mode page found
[    2.441941] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[    2.444691] sd 6:0:0:0: [sdd] No Caching mode page found
[    2.444693] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[    2.494860] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[    2.495015] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[    2.495089] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[    2.495451] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    2.495767] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[    2.495772] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.20  Wed Oct 30 17:43:35 PDT 2013
[    2.498399]  sdd: sdd1
[    2.501396] sd 6:0:0:0: [sdd] No Caching mode page found
[    2.501399] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[    2.501401] sd 6:0:0:0: [sdd] Attached SCSI disk
[    2.754683] sr 3:0:0:0: [sr0]  
[    2.754687] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    2.754689] sr 3:0:0:0: [sr0]  
[    2.754691] Sense Key : Illegal Request [current] 
[    2.754694] sr 3:0:0:0: [sr0]  
[    2.754698] Add. Sense: Read of scrambled sector without authentication
[    2.754700] sr 3:0:0:0: [sr0] CDB: 
[    2.754702] Read(10): 28 00 00 00 80 00 00 00 02 00
[    2.754709] end_request: I/O error, dev sr0, sector 131072
[    2.754712] Buffer I/O error on device sr0, logical block 32768
[    2.754714] Buffer I/O error on device sr0, logical block 32769
[    2.758540] sr 3:0:0:0: [sr0]  
[    2.758542] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    2.758543] sr 3:0:0:0: [sr0]  
[    2.758543] Sense Key : Illegal Request [current] 
[    2.758545] sr 3:0:0:0: [sr0]  
[    2.758546] Add. Sense: Read of scrambled sector without authentication
[    2.758547] sr 3:0:0:0: [sr0] CDB: 
[    2.758547] Read(10): 28 00 00 00 80 00 00 00 01 00
[    2.758551] end_request: I/O error, dev sr0, sector 131072
[    2.758552] Buffer I/O error on device sr0, logical block 32768
[    2.762444] sr 3:0:0:0: [sr0]  
[    2.762447] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    2.762449] sr 3:0:0:0: [sr0]  
[    2.762450] Sense Key : Illegal Request [current] 
[    2.762453] sr 3:0:0:0: [sr0]  
[    2.762456] Add. Sense: Read of scrambled sector without authentication
[    2.762458] sr 3:0:0:0: [sr0] CDB: 
[    2.762459] Read(10): 28 00 00 00 80 01 00 00 01 00
[    2.762466] end_request: I/O error, dev sr0, sector 131076
[    2.762468] Buffer I/O error on device sr0, logical block 32769
[    2.832704] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2573, rf: 0002, rev: 000a
[    2.835900] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    2.836488] usbcore: registered new interface driver rt73usb
[    2.844331] systemd-udevd[430]: renamed network interface wlan0 to wlp0s29u1u5
[    2.844345] cfg80211: Calling CRDA for country: FR
[    2.845201] cfg80211: Regulatory domain changed to country: FR
[    2.845202] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    2.845203] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    2.845204] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    2.845204] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    2.845205] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[    2.845206] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[    2.870254] sr 3:0:0:0: [sr0]  
[    2.870256] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    2.870257] sr 3:0:0:0: [sr0]  
[    2.870258] Sense Key : Illegal Request [current] 
[    2.870259] sr 3:0:0:0: [sr0]  
[    2.870261] Add. Sense: Read of scrambled sector without authentication
[    2.870262] sr 3:0:0:0: [sr0] CDB: 
[    2.870263] Read(10): 28 00 00 00 04 00 00 00 02 00
[    2.870266] end_request: I/O error, dev sr0, sector 4096
[    2.870267] Buffer I/O error on device sr0, logical block 1024
[    2.870268] Buffer I/O error on device sr0, logical block 1025
[    2.874119] sr 3:0:0:0: [sr0]  
[    2.874121] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    2.874122] sr 3:0:0:0: [sr0]  
[    2.874123] Sense Key : Illegal Request [current] 
[    2.874124] sr 3:0:0:0: [sr0]  
[    2.874126] Add. Sense: Read of scrambled sector without authentication
[    2.874127] sr 3:0:0:0: [sr0] CDB: 
[    2.874127] Read(10): 28 00 00 00 04 00 00 00 01 00
[    2.874131] end_request: I/O error, dev sr0, sector 4096
[    2.874132] Buffer I/O error on device sr0, logical block 1024
[    2.968024] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[    2.968028] SELinux: initialized (dev dm-3, type ext4), uses xattr
[    3.058705] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
[    3.108159] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[    3.108164] SELinux: initialized (dev dm-2, type ext4), uses xattr
[    3.136652] systemd-journald[393]: Received request to flush runtime journal from PID 1
[    3.147033] type=1305 audit(1384722442.087:3): audit_pid=679 old=0 auid=4294967295 ses=4294967295
 subj=system_u:system_r:auditd_t:s0 res=1
[    3.204330] scsi 7:0:0:0: Direct-Access     Generic  Storage Device   0.00 PQ: 0 ANSI: 2
[    3.204571] sd 7:0:0:0: Attached scsi generic sg5 type 0
[    3.204991] sd 7:0:0:0: [sde] Attached SCSI removable disk
[    3.296379] scsi 8:0:0:0: Direct-Access     WDC WD10 TPVT-00HT5T1          PQ: 0 ANSI: 2 CCS
[    3.296704] sd 8:0:0:0: Attached scsi generic sg6 type 0
[    3.297124] sd 8:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    3.297550] sd 8:0:0:0: [sdf] Write Protect is off
[    3.297553] sd 8:0:0:0: [sdf] Mode Sense: 28 00 00 00
[    3.297976] sd 8:0:0:0: [sdf] No Caching mode page found
[    3.297979] sd 8:0:0:0: [sdf] Assuming drive cache: write through
[    3.300332] sd 8:0:0:0: [sdf] No Caching mode page found
[    3.300335] sd 8:0:0:0: [sdf] Assuming drive cache: write through
[    3.302434]  sdf: sdf1
[    3.303677] sd 8:0:0:0: [sdf] No Caching mode page found
[    3.303679] sd 8:0:0:0: [sdf] Assuming drive cache: write through
[    3.303682] sd 8:0:0:0: [sdf] Attached SCSI disk
[    3.318040] systemd-logind[717]: Watching system buttons on /dev/input/event1 (Power Button)
[    3.318108] systemd-logind[717]: Watching system buttons on /dev/input/event0 (Power Button)
[    3.346411] vboxdrv: Found 8 processor cores.
[    3.346593] vboxdrv: fAsync=0 offMin=0x177 offMax=0x16fb
[    3.346642] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[    3.346643] vboxdrv: Successfully loaded version 4.3.2 (interface 0x001a0005).
[    3.350042] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    3.357060] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    3.370263] Ebtables v2.0 registered
[    3.375421] Bridge firewalling registered
[    3.551318] vboxpci: IOMMU not found (not registered)
[    7.593001] Bluetooth: Core ver 2.16
[    7.593068] NET: Registered protocol family 31
[    7.593069] Bluetooth: HCI device and connection manager initialized
[    7.593076] Bluetooth: HCI socket layer initialized
[    7.593077] Bluetooth: L2CAP socket layer initialized
[    7.593081] Bluetooth: SCO socket layer initialized
[    7.595663] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    7.595665] Bluetooth: BNEP filters: protocol multicast
[    7.595670] Bluetooth: BNEP socket layer initialized
[    7.640115] nvidia 0000:01:00.0: irq 55 for MSI/MSI-X
[    7.692641] r8169 0000:03:00.0 p4p1: link down
[    7.692682] IPv6: ADDRCONF(NETDEV_UP): p4p1: link is not ready
[    7.694096] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'
[    7.695894] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7
[    7.771418] IPv6: ADDRCONF(NETDEV_UP): wlp0s29u1u5: link is not ready
[   10.199506] wlp0s29u1u5: authenticate with 84:c9:b2:63:1b:c2
[   10.260660] wlp0s29u1u5: send auth to 84:c9:b2:63:1b:c2 (try 1/3)
[   10.262982] wlp0s29u1u5: authenticated
[   10.263139] rt73usb 2-1.5:1.0 wlp0s29u1u5: disabling HT as WMM/QoS is not supported by the AP
[   10.263141] rt73usb 2-1.5:1.0 wlp0s29u1u5: disabling VHT as WMM/QoS is not supported by the AP
[   10.264164] wlp0s29u1u5: associate with 84:c9:b2:63:1b:c2 (try 1/3)
[   10.268319] wlp0s29u1u5: RX AssocResp from 84:c9:b2:63:1b:c2 (capab=0x411 status=0 aid=1)
[   10.279468] wlp0s29u1u5: associated
[   10.279494] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29u1u5: link becomes ready
[   22.040099] fuse init (API version 7.22)
[   22.041551] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[   22.047732] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
[   28.290155] UDF-fs: INFO Mounting volume 'LOTR_THE_TWO_TOWERS_SIDE_A', timestamp 2006/09/26 10:46 (103c)
[   28.291774] SELinux: initialized (dev sr0, type udf), uses genfs_contexts
[   28.338411] SELinux: initialized (dev sdd1, type fuseblk), uses genfs_contexts
[   29.182228] SELinux: initialized (dev sdf1, type fuseblk), uses genfs_contexts
[   40.834639] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 2 DMA timed out, invoke forced forced reset
[   41.156062] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[   41.842513] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 2 DMA timed out, invoke forced forced reset
voilà !
Salut, perso ce problème vient d'être résolu à l'instant suite à la mise à jour que je viens de faire ce matin (je n'ai rien touché au firmware ni aux nappes SATA ou autre chose.) Ça fait plaisir de voir enfin démarrer le fixe aussi vite que le portable 😃

Je passe en résolu (je n'ai pas vu quels paquets ont été mis à jour, mais je trouverai intéressant de savoir d’où venait le problème)
# yum history list
puis
# yum history info [ID]
# yum history info 60
Modules complémentaires chargés : langpacks, refresh-packagekit
ID de transaction : 60
Temps de début    : Mon Nov 18 06:51:23 2013
Début de RPMDB    : 1871:b46fa1c03d0dfc2779335723a3c27349a445b3ee
Temps de fin :            06:52:07 2013 (44 secondes)
Fin de RPMDB : 1873:b1d6b39423c7ebc0a814f97f7e6607a8e0bce74c
Utilisateur  : Système <indéfini>
Code retour  : Réussi
Transaction effectuée avec :
    Installé     PackageKit-yum-0.8.9-6.fc19.x86_64      @koji-override-0/$releasever
    Installé     rpm-4.11.1-3.fc19.x86_64                @updates
    Installé     yum-3.4.3-111.fc19.noarch               @updates
    Installé     yum-metadata-parser-1.1.4-8.fc19.x86_64 @koji-override-0/$releasever                               
Paquets modifiés :                                                                                                  
    Mis à jour    acl-2.2.51-9.fc19.x86_64                              @koji-override-0/$releasever                
    Mise à jour       2.2.51-10.fc19.x86_64                             @updates
    Mis à jour    colord-1.0.3-1.fc19.x86_64                            @updates
    Mise à jour          1.0.4-1.fc19.x86_64                            @updates
    Mis à jour    colord-libs-1.0.3-1.fc19.x86_64                       @updates
    Mise à jour               1.0.4-1.fc19.x86_64                       @updates
    Mis à jour    evolution-data-server-3.8.5-5.fc19.x86_64             @updates
    Mise à jour                         3.8.5-6.fc19.x86_64             @updates
    Mis à jour    gnutls-3.1.15-1.fc19.x86_64                           @updates
    Mise à jour          3.1.16-1.fc19.x86_64                           @updates
    Mis à jour    gnutls-dane-3.1.15-1.fc19.x86_64                      @updates
    Mise à jour               3.1.16-1.fc19.x86_64                      @updates
    Mis à jour    gnutls-utils-3.1.15-1.fc19.x86_64                     @updates
    Mise à jour                3.1.16-1.fc19.x86_64                     @updates
    Mis à jour    iw-3.8-2.fc19.x86_64                                  @koji-override-0/$releasever
    Mise à jour      3.11-1.fc19.x86_64                                 @updates
    Mis à jour    kdepimlibs-4.11.3-1.fc19.x86_64                       @updates
    Mise à jour              4.11.3-3.fc19.x86_64                       @updates
    Mis à jour    kdepimlibs-akonadi-4.11.3-1.fc19.x86_64               @updates
    Mise à jour                      4.11.3-3.fc19.x86_64               @updates
    Mis à jour    kdepimlibs-kxmlrpcclient-4.11.3-1.fc19.x86_64         @updates
    Mise à jour                            4.11.3-3.fc19.x86_64         @updates
    Installation  kernel-3.11.8-200.fc19.x86_64                         @updates
    Mis à jour    kernel-headers-3.11.7-200.fc19.x86_64                 @updates
    Mise à jour                  3.11.8-200.fc19.x86_64                 @updates
    Installation  kernel-modules-extra-3.11.8-200.fc19.x86_64           @updates
    Mis à jour    libacl-2.2.51-9.fc19.x86_64                           @koji-override-0/$releasever
    Mise à jour          2.2.51-10.fc19.x86_64                          @updates
    Mis à jour    libcacard-2:1.4.2-12.fc19.x86_64                      @updates
    Mise à jour             2:1.4.2-13.fc19.x86_64                      @updates
    Mis à jour    libdmapsharing-2.9.18-1.fc19.x86_64                   @updates
    Mise à jour                  2.9.24-1.fc19.x86_64                   @updates
    Mis à jour    libvirt-client-1.0.5.6-3.fc19.x86_64                  @updates
    Mise à jour                  1.0.5.7-1.fc19.x86_64                  @updates
    Mis à jour    libvirt-daemon-1.0.5.6-3.fc19.x86_64                  @updates
    Mise à jour                  1.0.5.7-1.fc19.x86_64                  @updates
    Mis à jour    libvirt-daemon-driver-interface-1.0.5.6-3.fc19.x86_64 @updates
    Mise à jour                                   1.0.5.7-1.fc19.x86_64 @updates
    Mis à jour    libvirt-daemon-driver-network-1.0.5.6-3.fc19.x86_64   @updates
    Mise à jour                                 1.0.5.7-1.fc19.x86_64   @updates
    Mis à jour    libvirt-daemon-driver-nodedev-1.0.5.6-3.fc19.x86_64   @updates
    Mise à jour                                 1.0.5.7-1.fc19.x86_64   @updates
    Mis à jour    libvirt-daemon-driver-nwfilter-1.0.5.6-3.fc19.x86_64  @updates
    Mise à jour                                  1.0.5.7-1.fc19.x86_64  @updates
    Mis à jour    libvirt-daemon-driver-qemu-1.0.5.6-3.fc19.x86_64      @updates
    Mise à jour                              1.0.5.7-1.fc19.x86_64      @updates
    Mis à jour    libvirt-daemon-driver-secret-1.0.5.6-3.fc19.x86_64    @updates
    Mise à jour                                1.0.5.7-1.fc19.x86_64    @updates
    Mis à jour    libvirt-daemon-driver-storage-1.0.5.6-3.fc19.x86_64   @updates
    Mise à jour                                 1.0.5.7-1.fc19.x86_64   @updates
    Mis à jour    libvirt-daemon-kvm-1.0.5.6-3.fc19.x86_64              @updates
    Mise à jour                      1.0.5.7-1.fc19.x86_64              @updates
    Mis à jour    mesa-dri-drivers-9.2-1.20130919.fc19.x86_64           @updates
    Mise à jour                    9.2.3-1.20131114.fc19.x86_64         @updates
    Mis à jour    mesa-filesystem-9.2-1.20130919.fc19.x86_64            @updates
    Mise à jour                   9.2.3-1.20131114.fc19.x86_64          @updates
    Mis à jour    mesa-libEGL-9.2-1.20130919.fc19.i686                  @updates
    Mis à jour    mesa-libEGL-9.2-1.20130919.fc19.x86_64                @updates
    Mise à jour               9.2.3-1.20131114.fc19.i686                @updates
    Mise à jour               9.2.3-1.20131114.fc19.x86_64              @updates
    Mis à jour    mesa-libGL-9.2-1.20130919.fc19.i686                   @updates
    Mis à jour    mesa-libGL-9.2-1.20130919.fc19.x86_64                 @updates
    Mise à jour              9.2.3-1.20131114.fc19.i686                 @updates
    Mise à jour              9.2.3-1.20131114.fc19.x86_64               @updates
    Mis à jour    mesa-libgbm-9.2-1.20130919.fc19.i686                  @updates
    Mis à jour    mesa-libgbm-9.2-1.20130919.fc19.x86_64                @updates
    Mise à jour               9.2.3-1.20131114.fc19.i686                @updates
    Mise à jour               9.2.3-1.20131114.fc19.x86_64              @updates
    Mis à jour    mesa-libglapi-9.2-1.20130919.fc19.i686                @updates
    Mis à jour    mesa-libglapi-9.2-1.20130919.fc19.x86_64              @updates
    Mise à jour                 9.2.3-1.20131114.fc19.i686              @updates
    Mise à jour                 9.2.3-1.20131114.fc19.x86_64            @updates
    Mis à jour    mesa-libwayland-egl-9.2-1.20130919.fc19.x86_64        @updates
    Mise à jour                       9.2.3-1.20131114.fc19.x86_64      @updates
    Mis à jour    mesa-libxatracker-9.2-1.20130919.fc19.x86_64          @updates
    Mise à jour                     9.2.3-1.20131114.fc19.x86_64        @updates
    Mis à jour    phpMyAdmin-3.5.8.1-1.fc19.noarch                      @fedora
    Mise à jour              3.5.8.2-1.fc19.noarch                      @updates
    Mis à jour    qemu-common-2:1.4.2-12.fc19.x86_64                    @updates
    Mise à jour               2:1.4.2-13.fc19.x86_64                    @updates
    Mis à jour    qemu-guest-agent-2:1.4.2-12.fc19.x86_64               @updates
    Mise à jour                    2:1.4.2-13.fc19.x86_64               @updates
    Mis à jour    qemu-img-2:1.4.2-12.fc19.x86_64                       @updates
    Mise à jour            2:1.4.2-13.fc19.x86_64                       @updates
    Mis à jour    qemu-kvm-2:1.4.2-12.fc19.x86_64                       @updates
    Mise à jour            2:1.4.2-13.fc19.x86_64                       @updates
    Mis à jour    qemu-system-x86-2:1.4.2-12.fc19.x86_64                @updates
    Mise à jour                   2:1.4.2-13.fc19.x86_64                @updates
    Mis à jour    xorg-x11-server-Xorg-1.14.3-2.fc19.x86_64             @updates
    Mise à jour                        1.14.4-3.fc19.x86_64             @updates
    Mis à jour    xorg-x11-server-common-1.14.3-2.fc19.x86_64           @updates
    Mise à jour                          1.14.4-3.fc19.x86_64           @updates
Je suppose donc que c'est la mise à jour du kernel qui corrige le souci.

Je connaissait « yum history list », mais pas le « yum history info » :-D Merci Valdes !
8 mois plus tard
Je me permet un petit déterrage de topic (self-déterrage) car je viens tout juste de trouver la raison pour laquelle le boot était lent (et oui, le sujet n'était pas réellement résolu, car les symptômes sont revenu quelques reboots après que j'ai passé en résolu, baissant les bras sur le problème).

Donc, pour ceux qui ont le même soucis (s'il y en a), petite analyse toute bête :

Dans le dmesg, on pouvais lire ça :
Nov 10 18:05:57 Salon kernel: [   33.887889] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Nov 10 18:05:57 Salon kernel: [   33.887894] ata1.00: failed command: IDENTIFY PACKET DEVICE
Nov 10 18:05:57 Salon kernel: [   33.887898] ata1.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
Nov 10 18:05:57 Salon kernel: [   33.887898]          res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
Notez le ata1.00
Pensant bêtement que c'était le SSD, je n'ai pas pu résoudre le soucis. Car en réalité, le périphérique ata1.00 était......... le lecteur CD/DVD... 😐

En fait il fallait regarder plus haut dans le dmesg pour savoir de quel périphérique il s'agissait :
Nov 10 18:05:57 Salon kernel: [    1.285026] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB06, max MWDMA2
Donc c'était bien le lecteur cd/DVD qui freezait et pétait les performances au boot.

Alors pour régler mon soucis radicalement, j'ai débranché le lecteur (je m'en sert une fois tout les 36 du mois), et là, enfin un boot digne de ce nom :
$ systemd-analyze blame
         12.858s ntpdate.service
          2.183s mariadb.service
          1.750s NetworkManager-wait-online.service
           768ms plymouth-start.service
           507ms lvm2-pvscan@8:2.service
           442ms jexec.service
           411ms lvm2-monitor.service
           400ms firewalld.service
           387ms accounts-daemon.service
           379ms rtkit-daemon.service
           356ms systemd-tmpfiles-setup.service
           352ms avahi-daemon.service
           328ms dnf-makecache.service
           308ms rsyslog.service
           304ms httpd.service
           228ms livesys.service
           218ms systemd-user-sessions.service
           210ms systemd-logind.service
           195ms libvirtd.service
           176ms rpcbind.service
           166ms akmods.service
           148ms systemd-udev-settle.service
           139ms systemd-fsck-root.service
           127ms named.service
           127ms mcelog.service
           126ms named-setup-rndc.service
           116ms akmods-shutdown.service
            97ms systemd-fsck@dev-mapper-fedora\x2dhome.service
            91ms dmraid-activation.service
            59ms systemd-vconsole-setup.service
            49ms gdm.service
            48ms NetworkManager.service
            37ms colord.service
            34ms abrt-ccpp.service
            34ms systemd-tmpfiles-setup-dev.service
            33ms systemd-fsck@dev-disk-by\x2duuid-d33d222b\x2df8f7\x2d4e79\x2dbe68\x2dbb19ebb98faf.service
            29ms proc-sys-fs-binfmt_misc.mount
            27ms udisks2.service
            25ms dev-hugepages.mount
            24ms polkit.service
            24ms systemd-udev-trigger.service
            23ms teamviewerd.service
            23ms dev-mqueue.mount
            22ms sys-kernel-debug.mount
            20ms packagekit.service
            19ms systemd-modules-load.service
            17ms home.mount
            17ms systemd-udevd.service
            16ms user@42.service
            15ms fedora-readonly.service
            15ms plymouth-read-write.service
            15ms user@1000.service
            10ms systemd-journal-flush.service
             9ms systemd-readahead-replay.service
             9ms systemd-readahead-collect.service
             8ms rc-local.service
             8ms systemd-update-utmp-runlevel.service
             7ms plymouth-quit-wait.service
             7ms upower.service
             7ms auditd.service
             7ms boot.mount
             5ms dev-mapper-fedora\x2dswap.swap
             5ms livesys-late.service
             5ms kmod-static-nodes.service
             3ms systemd-sysctl.service
             3ms systemd-remount-fs.service
             3ms fedora-import-state.service
             3ms systemd-readahead-done.service
             3ms sys-fs-fuse-connections.mount
             2ms bluetooth.service
             2ms systemd-update-utmp.service
             2ms tmp.mount
             2ms systemd-random-seed.service
             1ms sys-kernel-config.mount
]$ systemd-analyze time
Startup finished in 1.332s (kernel) + 1.207s (initrd) + 16.930s (userspace) = 19.470s
Voila, il resterait juste à voir pourquoi ntpdate prends autant de temps à s'initialiser, mais bon je passe de 60 s de temps de boot à moins de 20 s, j'vais pas me plaindre.

Donc sujet RÉELLEMENT résolu, même si la méthode de résolution laisse un peu à désirer.

En espérant que ça puisse aider d'autres qui auraient le même souci.
Voila, il resterait juste à voir pourquoi ntpdate
Essaie avec des serveurs ntp français ?
Je remarque que tu as beaucoup de service de lancé.

Est-ce qu'il te sont tous utiles ?

Par exemple bluetooth.service si tu n'as pas de bluetooth ou tout ce qui a rapport avec lvm2 si tu n'utilises pas le lvm.