xylphute

  • il y a 3 heures
  • Inscrit 22 déc. 2021
  • 58 meilleures réponses
  • Petit nouveau Adepte du forum Amoureux Rédacteur wiki+ 8 de plus
  • Dans Par quoi remplacer Skype

    @xylphute
    et uniquement pour chrome et edge, oui

    @Jonathan raspaut
    merci je vois qu’il y a un dépôt pour Fedora et en plus très récemment mis à jour (9 février dernier)

  • Dans Choix du wm au boot ?

    Merci @xylphute !

    Effectivement un :

    dnf install xorg-x11-server-Xorg

    puis un reboot et je retrouve openbox dans la liste des wm au démarrage, joie !

    Merci encore !

  • Dans Manette générique Xbox nacon reconnue mais non fonctionnelle

    C’est bon ça fonctionne en passant par le depot sentry. Comme mentinoné plus haut.

    Il me manquait les packages suivants:

    sudo dnf install fedora-packager fedora-review

    Merci encore @xylphute .

  • Dans Le système demarre sur boot et non /boot/efi/

    pas très encourageant, surtout venant de toi !
    @xylphute Grub ne me donne que F38, rescue et windows puisque c’est un double boot qui d’ailleurs ne sert pas.

  • Dans Écran noir avec 6.8.8 + Wayland

    Nicosss J’ai réussi à les downgrade mais ensuite, pas moyen de rebuild le kmod avec akmod, et avant ça, ça ne resolvait pas le souci.

    Je croyais que nvidia et wayland ne faisait pas bon ménage ?

    Sans doute, en fait avec Fedora 40, c’est la première fois que je parvenais à lancer Sway.

    @xylphute ah intéressant, faudra peut-être que j’essaie WLR_RENDERER=vulkan tout à l’heure. Là ce qu’il faudrait que je comprenne, c’est comment sddm lance sway. À mon avis, il doit lui passer des arguments ou des variables d’environnement qui font tout planter.

      • Dans Autres utilisateurs non accessibles depuis la réinstallation de fedora 39

        Merci pour l’aide @VINDICATORs @xylphute

        je viens de faire avant de lire ton message, la commande que tu mentionnes

        chown, user2:user2 user2
chown, user3:user3 user3

        Problème de permutation entre user2 et user3 résolu.

        Merci

        Il reste le souci de connexion avec user2 et user3 et le problème des droits d’éciture/lecture… pour chaque utilisateur.
        EDIT : C’est réglé pour la connexion.

        J’ai refait les commandes ( avec le -R, merci @VINDICATORs )

        chown (à partir de ma session administrateur “user1”)

        chown -R user2:user2 user2
chown -R user3:user3 user3

        Plus d’erreurs d’écriture et d’accès à l’ouverture des deux sessions (user2 et user3)

        Pour les droits écriture/consultation, c’est correct ? Pour les 3 utilisateurs ?

        propriétaire: consulter, écrire
        groupes: consulter
        autres: pas d’accès

        • Dans Clé USB plus accessible

          Super, merci à toi @xylphute la commande dd a fait reconnaître la clé par le système (j’utilise aussi cette commande pour des images disques, je ne me doutais pas que cette fonction était possible ^^).

          Tout d’abord reconnue avec 4 Mo, j’y ai copié par dépit une image Linux avec Balena après de nombreux essais, ce qui l’aurait “débloquée”.
          Elle est finalement bien formatée de nouveau avec Gparted, tout semble fonctionnel, encore merci.

          @nouvo09 je formate toujours les média amovibles en fat32 pour l’utilisation que j’en fais, ça me semble le plus universel entre les machines et je n’ai pas besoin de transférer de gros fichiers, sinon exfat. Il y aurait mieux ?

        • Dans Samba : mot de passe non reconnu Linux & Windows

          @xylphute Oui merci beaucoup, ce lien est très bien

          Ma config =>

          [global]
workgroup = WORKGROUP
server string = Samba Server %v
netbios name = sambaserver
security = user
map to guest = bad user
dns proxy = no
ntlm auth = true
client min protocol = NT1
server min protocol = NT1
log file = /var/log/samba/log.%m
log level = 3
max log size = 1000
logging = file
panic action = /usr/share/samba/panic-action %d
server role = standalone server
obey pam restrictions = yes
unix password sync = yes
passwd program = /usr/bin/passwd %u
passwd chat = \*Enter\\snew\\s\*\\spassword:\* %n\\n \*Retype\\snew\\s\*\\spassword:\* %n\\n \*password\\supdated\\ssuccessfully\* .
pam password change = yes
map to guest = bad user
usershare allow guests = yes

\#======================= Share Definitions =======================

[Public]
path = /home/pcpixmusic/Public
browsable =yes
writable = yes
guest ok = yes
read only = no

[Private]
path = /home/pcpixmusic/Private
valid users = @smbgroup
guest ok = no
writable = no
browsable = yes

          Edit Nicosss : Correction balises Markdown -> Voir FAQ

          • Dans Samba : mot de passe non reconnu Linux & Windows

            @xylphute : Désolé, j’ai des problèmes avec les abréviations.

            J’ai fait un sudo systemctl restart smb
            Et même un redémarrage de l’ordinateur, mais ça ne change rien.

            SELinux est désactivé

            Il a peut-être quelque chose à faire au niveau du Pare-Feu ?

          • Dans Fenêtre sur le mauvais écran (ou pas).

            Bonjour,

            @xylphute je confirme que les écrans sont bien définis tel que je le souhaite.

            Merci pour l’information concernant le pointeur car c’est exactement ce qu’il se passe lorsque je ré-allume mon écran pour peu que j’ai bougé la souris (je viens de tester).

            Je ne parviens pas à trouver l’option système en ce sens, saurais-tu m’en dire plus ?

            Merci @Nicosss pour la mise en forme du msg.

          • Dans deverrouiller une clef USB

            • [supprimé]

            • Message #22

            Essaye la commande dd de @xylphute , sinon la plus belle benne du quartier, je vois plus que ça …

          • Dans Taille de disque inconnu dans GNOME Paramètres et GNOME Disques (Fedora 39)
          • Dans Bizarrerie ou pas ??

            @xylphute :

            Comment être sur que je ne suis pas en veille mais éteint ?

            Si en sélectionnant éteindre je suis en veille, y a-t-il un endroit dans la conf fedora où l’on peut choisir cela ?

          • Dans Bug bizarre de reconnexion ?

            Coucou @Nicosss et merci pour tout !

            Oui j’ai eu du bol 🙂 Bref superbe fédora 🙂

            Je vais voir lundi @xylphute pour l’écran de 13 pouces 🙂

            Bonne journée à vous !

            YoG

          • Dans Bug bizarre de reconnexion ?

            @xylphute ok je vois cela la semaine prochaine ! Là c’est trop tard je reviens dimanche 🙂 Merci

            @Nicosss voila pour la première commande:

            
steff@fedora:\~$ systemctl --user list-units --all --state=inactive

  UNIT                                              LOAD      ACTIVE   SUB  DES>

  gnome-initial-setup-copy-worker.service           loaded    inactive dead GNO>

  gnome-initial-setup-first-login.service           loaded    inactive dead GNO>

● gnome-initial-setup.service                       not-found inactive dead gno>

  gnome-session-failed.service                      loaded    inactive dead GNO>

  gnome-session-manager@gnome-initial-setup.service loaded    inactive dead GNO>

  gnome-session-manager@gnome-login.service         loaded    inactive dead GNO>

  gnome-session-restart-dbus.service                loaded    inactive dead Res>

  gnome-session-signal-init.service                 loaded    inactive dead Sig>

  grub-boot-success.service                         loaded    inactive dead Mar>

  org.gnome.Shell-disable-extensions.service        loaded    inactive dead Dis>

  org.gnome.Shell@x11.service                       loaded    inactive dead GNO>

● pipewire-media-session.service                    not-found inactive dead pip>

● pulseaudio.service                                not-found inactive dead pul>

  snapd.session-agent.service                       loaded    inactive dead sna>

● systemd-oomd.service                              not-found inactive dead sys>

  systemd-tmpfiles-clean.service                    loaded    inactive dead Cle>

  background.slice                                  loaded    inactive dead Use>

● pulseaudio.socket                                 not-found inactive dead pul>

● blockdev@dev-loop0.target                         not-found inactive dead blo>

● blockdev@dev-loop1.target                         not-found inactive dead blo>

● blockdev@dev-loop10.target                        not-found inactive dead blo>

● blockdev@dev-loop11.target                        not-found inactive dead blo>

lines 1-23

  UNIT                                              LOAD      ACTIVE   SUB  DESC>

  gnome-initial-setup-copy-worker.service           loaded    inactive dead GNOM>

  gnome-initial-setup-first-login.service           loaded    inactive dead GNOM>

● gnome-initial-setup.service                       not-found inactive dead gnom>

  gnome-session-failed.service                      loaded    inactive dead GNOM>

  gnome-session-manager@gnome-initial-setup.service loaded    inactive dead GNOM>

  gnome-session-manager@gnome-login.service         loaded    inactive dead GNOM>

  gnome-session-restart-dbus.service                loaded    inactive dead Rest>

  gnome-session-signal-init.service                 loaded    inactive dead Sign>

  grub-boot-success.service                         loaded    inactive dead Mark>

  org.gnome.Shell-disable-extensions.service        loaded    inactive dead Disa>

  org.gnome.Shell@x11.service                       loaded    inactive dead GNOM>

● pipewire-media-session.service                    not-found inactive dead pipe>

● pulseaudio.service                                not-found inactive dead puls>

  snapd.session-agent.service                       loaded    inactive dead snap>

● systemd-oomd.service                              not-found inactive dead syst>

  systemd-tmpfiles-clean.service                    loaded    inactive dead Clea>

  background.slice                                  loaded    inactive dead User>

● pulseaudio.socket                                 not-found inactive dead puls>

● blockdev@dev-loop0.target                         not-found inactive dead bloc>

● blockdev@dev-loop1.target                         not-found inactive dead bloc>

● blockdev@dev-loop10.target                        not-found inactive dead bloc>

● blockdev@dev-loop11.target                        not-found inactive dead bloc>

lines 1-23

  UNIT                                              LOAD      ACTIVE   SUB  DESCRI>

  gnome-initial-setup-copy-worker.service           loaded    inactive dead GNOME >

  gnome-initial-setup-first-login.service           loaded    inactive dead GNOME >

● gnome-initial-setup.service                       not-found inactive dead gnome->

  gnome-session-failed.service                      loaded    inactive dead GNOME >

  gnome-session-manager@gnome-initial-setup.service loaded    inactive dead GNOME >

  gnome-session-manager@gnome-login.service         loaded    inactive dead GNOME >

  gnome-session-restart-dbus.service                loaded    inactive dead Restar>

  gnome-session-signal-init.service                 loaded    inactive dead Signal>

  grub-boot-success.service                         loaded    inactive dead Mark b>

  org.gnome.Shell-disable-extensions.service        loaded    inactive dead Disabl>

  org.gnome.Shell@x11.service                       loaded    inactive dead GNOME >

● pipewire-media-session.service                    not-found inactive dead pipewi>

● pulseaudio.service                                not-found inactive dead pulsea>

  snapd.session-agent.service                       loaded    inactive dead snapd >

● systemd-oomd.service                              not-found inactive dead system>

  systemd-tmpfiles-clean.service                    loaded    inactive dead Cleanu>

  background.slice                                  loaded    inactive dead User B>

● pulseaudio.socket                                 not-found inactive dead pulsea>

● blockdev@dev-loop0.target                         not-found inactive dead blockd>

● blockdev@dev-loop1.target                         not-found inactive dead blockd>

● blockdev@dev-loop10.target                        not-found inactive dead blockd>

● blockdev@dev-loop11.target                        not-found inactive dead blockd>

lines 1-23...skipping...

  UNIT                                              LOAD      ACTIVE   SUB  DESCRIPTION    >

  gnome-initial-setup-copy-worker.service           loaded    inactive dead GNOME Initial S>

  gnome-initial-setup-first-login.service           loaded    inactive dead GNOME Initial S>

● gnome-initial-setup.service                       not-found inactive dead gnome-initial-s>

  gnome-session-failed.service                      loaded    inactive dead GNOME Session F>

  gnome-session-manager@gnome-initial-setup.service loaded    inactive dead GNOME Session M>

  gnome-session-manager@gnome-login.service         loaded    inactive dead GNOME Session M>

  gnome-session-restart-dbus.service                loaded    inactive dead Restart DBus af>

  gnome-session-signal-init.service                 loaded    inactive dead Signal initiali>

  grub-boot-success.service                         loaded    inactive dead Mark boot as su>

  org.gnome.Shell-disable-extensions.service        loaded    inactive dead Disable GNOME S>

  org.gnome.Shell@x11.service                       loaded    inactive dead GNOME Shell on >

● pipewire-media-session.service                    not-found inactive dead pipewire-media->

● pulseaudio.service                                not-found inactive dead pulseaudio.serv>

  snapd.session-agent.service                       loaded    inactive dead snapd user sess>

● systemd-oomd.service                              not-found inactive dead systemd-oomd.se>

  systemd-tmpfiles-clean.service                    loaded    inactive dead Cleanup of User>

  background.slice                                  loaded    inactive dead User Background>

● pulseaudio.socket                                 not-found inactive dead pulseaudio.sock>

● blockdev@dev-loop0.target                         not-found inactive dead blockdev@dev-lo>

● blockdev@dev-loop1.target                         not-found inactive dead blockdev@dev-lo>

● blockdev@dev-loop10.target                        not-found inactive dead blockdev@dev-lo>

● blockdev@dev-loop11.target                        not-found inactive dead blockdev@dev-lo>

● blockdev@dev-loop2.target                         not-found inactive dead blockdev@dev-lo>

lines 1-24

  UNIT                                              LOAD      ACTIVE   SUB  DESCRIPTION         >

  gnome-initial-setup-copy-worker.service           loaded    inactive dead GNOME Initial Setup >

  gnome-initial-setup-first-login.service           loaded    inactive dead GNOME Initial Setup

● gnome-initial-setup.service                       not-found inactive dead gnome-initial-setup.>

  gnome-session-failed.service                      loaded    inactive dead GNOME Session Failed>

  gnome-session-manager@gnome-initial-setup.service loaded    inactive dead GNOME Session Manage>

  gnome-session-manager@gnome-login.service         loaded    inactive dead GNOME Session Manage>

  gnome-session-restart-dbus.service                loaded    inactive dead Restart DBus after G>

  gnome-session-signal-init.service                 loaded    inactive dead Signal initializatio>

  grub-boot-success.service                         loaded    inactive dead Mark boot as success>

  org.gnome.Shell-disable-extensions.service        loaded    inactive dead Disable GNOME Shell >

  org.gnome.Shell@x11.service                       loaded    inactive dead GNOME Shell on X11

● pipewire-media-session.service                    not-found inactive dead pipewire-media-sessi>

● pulseaudio.service                                not-found inactive dead pulseaudio.service

  snapd.session-agent.service                       loaded    inactive dead snapd user session a>

● systemd-oomd.service                              not-found inactive dead systemd-oomd.service

  systemd-tmpfiles-clean.service                    loaded    inactive dead Cleanup of User's Te>

  background.slice                                  loaded    inactive dead User Background Task>

● pulseaudio.socket                                 not-found inactive dead pulseaudio.socket   >

● blockdev@dev-loop0.target                         not-found inactive dead blockdev@dev-loop0.t>

● blockdev@dev-loop1.target                         not-found inactive dead blockdev@dev-loop1.t>

● blockdev@dev-loop10.target                        not-found inactive dead blockdev@dev-loop10.>

● blockdev@dev-loop11.target                        not-found inactive dead blockdev@dev-loop11.>

● blockdev@dev-loop2.target                         not-found inactive dead blockdev@dev-loop2.t>

lines 1-24...skipping...

  UNIT                                              LOAD      ACTIVE   SUB  DESCRIPTION               >

  gnome-initial-setup-copy-worker.service           loaded    inactive dead GNOME Initial Setup Copy W>

  gnome-initial-setup-first-login.service           loaded    inactive dead GNOME Initial Setup

● gnome-initial-setup.service                       not-found inactive dead gnome-initial-setup.service

  gnome-session-failed.service                      loaded    inactive dead GNOME Session Failed lockd>

  gnome-session-manager@gnome-initial-setup.service loaded    inactive dead GNOME Session Manager (ses>

  gnome-session-manager@gnome-login.service         loaded    inactive dead GNOME Session Manager (ses>

  gnome-session-restart-dbus.service                loaded    inactive dead Restart DBus after GNOME S>

  gnome-session-signal-init.service                 loaded    inactive dead Signal initialization done>

  grub-boot-success.service                         loaded    inactive dead Mark boot as successful

  org.gnome.Shell-disable-extensions.service        loaded    inactive dead Disable GNOME Shell extens>

  org.gnome.Shell@x11.service                       loaded    inactive dead GNOME Shell on X11

● pipewire-media-session.service                    not-found inactive dead pipewire-media-session.ser>

● pulseaudio.service                                not-found inactive dead pulseaudio.service

  snapd.session-agent.service                       loaded    inactive dead snapd user session agent

● systemd-oomd.service                              not-found inactive dead systemd-oomd.service

  systemd-tmpfiles-clean.service                    loaded    inactive dead Cleanup of User's Temporar>

  background.slice                                  loaded    inactive dead User Background Tasks Slic>

● pulseaudio.socket                                 not-found inactive dead pulseaudio.socket         >

● blockdev@dev-loop0.target                         not-found inactive dead blockdev@dev-loop0.target

● blockdev@dev-loop1.target                         not-found inactive dead blockdev@dev-loop1.target

● blockdev@dev-loop10.target                        not-found inactive dead blockdev@dev-loop10.target

● blockdev@dev-loop11.target                        not-found inactive dead blockdev@dev-loop11.target

● blockdev@dev-loop2.target                         not-found inactive dead blockdev@dev-loop2.target

● blockdev@dev-loop3.target                         not-found inactive dead blockdev@dev-loop3.target

lines 1-25

  UNIT                                              LOAD      ACTIVE   SUB  DESCRIPTION                    >

  gnome-initial-setup-copy-worker.service           loaded    inactive dead GNOME Initial Setup Copy Worker

  gnome-initial-setup-first-login.service           loaded    inactive dead GNOME Initial Setup

● gnome-initial-setup.service                       not-found inactive dead gnome-initial-setup.service

  gnome-session-failed.service                      loaded    inactive dead GNOME Session Failed lockdown s>

  gnome-session-manager@gnome-initial-setup.service loaded    inactive dead GNOME Session Manager (session:>

  gnome-session-manager@gnome-login.service         loaded    inactive dead GNOME Session Manager (session:>

  gnome-session-restart-dbus.service                loaded    inactive dead Restart DBus after GNOME Sessio>

  gnome-session-signal-init.service                 loaded    inactive dead Signal initialization done to G>

  grub-boot-success.service                         loaded    inactive dead Mark boot as successful

  org.gnome.Shell-disable-extensions.service        loaded    inactive dead Disable GNOME Shell extensions >

  org.gnome.Shell@x11.service                       loaded    inactive dead GNOME Shell on X11

● pipewire-media-session.service                    not-found inactive dead pipewire-media-session.service

● pulseaudio.service                                not-found inactive dead pulseaudio.service

  snapd.session-agent.service                       loaded    inactive dead snapd user session agent

● systemd-oomd.service                              not-found inactive dead systemd-oomd.service

  systemd-tmpfiles-clean.service                    loaded    inactive dead Cleanup of User's Temporary Fil>

  background.slice                                  loaded    inactive dead User Background Tasks Slice    >

● pulseaudio.socket                                 not-found inactive dead pulseaudio.socket              >

● blockdev@dev-loop0.target                         not-found inactive dead blockdev@dev-loop0.target

● blockdev@dev-loop1.target                         not-found inactive dead blockdev@dev-loop1.target

● blockdev@dev-loop10.target                        not-found inactive dead blockdev@dev-loop10.target

● blockdev@dev-loop11.target                        not-found inactive dead blockdev@dev-loop11.target

● blockdev@dev-loop2.target                         not-found inactive dead blockdev@dev-loop2.target

● blockdev@dev-loop3.target                         not-found inactive dead blockdev@dev-loop3.target

lines 1-25

  UNIT                                              LOAD      ACTIVE   SUB  DESCRIPTION                        >

  gnome-initial-setup-copy-worker.service           loaded    inactive dead GNOME Initial Setup Copy Worker

  gnome-initial-setup-first-login.service           loaded    inactive dead GNOME Initial Setup

● gnome-initial-setup.service                       not-found inactive dead gnome-initial-setup.service

  gnome-session-failed.service                      loaded    inactive dead GNOME Session Failed lockdown scree>

  gnome-session-manager@gnome-initial-setup.service loaded    inactive dead GNOME Session Manager (session: gno>

  gnome-session-manager@gnome-login.service         loaded    inactive dead GNOME Session Manager (session: gno>

  gnome-session-restart-dbus.service                loaded    inactive dead Restart DBus after GNOME Session sh>

  gnome-session-signal-init.service                 loaded    inactive dead Signal initialization done to GNOME>

  grub-boot-success.service                         loaded    inactive dead Mark boot as successful

  org.gnome.Shell-disable-extensions.service        loaded    inactive dead Disable GNOME Shell extensions afte>

  org.gnome.Shell@x11.service                       loaded    inactive dead GNOME Shell on X11

● pipewire-media-session.service                    not-found inactive dead pipewire-media-session.service

● pulseaudio.service                                not-found inactive dead pulseaudio.service

  snapd.session-agent.service                       loaded    inactive dead snapd user session agent

● systemd-oomd.service                              not-found inactive dead systemd-oomd.service

  systemd-tmpfiles-clean.service                    loaded    inactive dead Cleanup of User's Temporary Files a>

  background.slice                                  loaded    inactive dead User Background Tasks Slice        >

● pulseaudio.socket                                 not-found inactive dead pulseaudio.socket                  >

● blockdev@dev-loop0.target                         not-found inactive dead blockdev@dev-loop0.target

● blockdev@dev-loop1.target                         not-found inactive dead blockdev@dev-loop1.target

● blockdev@dev-loop10.target                        not-found inactive dead blockdev@dev-loop10.target

● blockdev@dev-loop11.target                        not-found inactive dead blockdev@dev-loop11.target

● blockdev@dev-loop2.target                         not-found inactive dead blockdev@dev-loop2.target

● blockdev@dev-loop3.target                         not-found inactive dead blockdev@dev-loop3.target

lines 1-25

  UNIT                                              LOAD      ACTIVE   SUB  DESCRIPTION                          >

  gnome-initial-setup-copy-worker.service           loaded    inactive dead GNOME Initial Setup Copy Worker

  gnome-initial-setup-first-login.service           loaded    inactive dead GNOME Initial Setup

● gnome-initial-setup.service                       not-found inactive dead gnome-initial-setup.service

  gnome-session-failed.service                      loaded    inactive dead GNOME Session Failed lockdown screen >

  gnome-session-manager@gnome-initial-setup.service loaded    inactive dead GNOME Session Manager (session: gnome>

  gnome-session-manager@gnome-login.service         loaded    inactive dead GNOME Session Manager (session: gnome>

  gnome-session-restart-dbus.service                loaded    inactive dead Restart DBus after GNOME Session shut>

  gnome-session-signal-init.service                 loaded    inactive dead Signal initialization done to GNOME S>

  grub-boot-success.service                         loaded    inactive dead Mark boot as successful

  org.gnome.Shell-disable-extensions.service        loaded    inactive dead Disable GNOME Shell extensions after >

  org.gnome.Shell@x11.service                       loaded    inactive dead GNOME Shell on X11

● pipewire-media-session.service                    not-found inactive dead pipewire-media-session.service

● pulseaudio.service                                not-found inactive dead pulseaudio.service

  snapd.session-agent.service                       loaded    inactive dead snapd user session agent

● systemd-oomd.service                              not-found inactive dead systemd-oomd.service

  systemd-tmpfiles-clean.service                    loaded    inactive dead Cleanup of User's Temporary Files and>

  background.slice                                  loaded    inactive dead User Background Tasks Slice          >

● pulseaudio.socket                                 not-found inactive dead pulseaudio.socket                    >

● blockdev@dev-loop0.target                         not-found inactive dead blockdev@dev-loop0.target

● blockdev@dev-loop1.target                         not-found inactive dead blockdev@dev-loop1.target

● blockdev@dev-loop10.target                        not-found inactive dead blockdev@dev-loop10.target

● blockdev@dev-loop11.target                        not-found inactive dead blockdev@dev-loop11.target

● blockdev@dev-loop2.target                         not-found inactive dead blockdev@dev-loop2.target

● blockdev@dev-loop3.target                         not-found inactive dead blockdev@dev-loop3.target

lines 1-25

  UNIT                                              LOAD      ACTIVE   SUB  DESCRIPTION                           >

  gnome-initial-setup-copy-worker.service           loaded    inactive dead GNOME Initial Setup Copy Worker

  gnome-initial-setup-first-login.service           loaded    inactive dead GNOME Initial Setup

● gnome-initial-setup.service                       not-found inactive dead gnome-initial-setup.service

  gnome-session-failed.service                      loaded    inactive dead GNOME Session Failed lockdown screen (>

  gnome-session-manager@gnome-initial-setup.service loaded    inactive dead GNOME Session Manager (session: gnome->

  gnome-session-manager@gnome-login.service         loaded    inactive dead GNOME Session Manager (session: gnome->

  gnome-session-restart-dbus.service                loaded    inactive dead Restart DBus after GNOME Session shutd>

  gnome-session-signal-init.service                 loaded    inactive dead Signal initialization done to GNOME Se>

  grub-boot-success.service                         loaded    inactive dead Mark boot as successful

  org.gnome.Shell-disable-extensions.service        loaded    inactive dead Disable GNOME Shell extensions after f>

  org.gnome.Shell@x11.service                       loaded    inactive dead GNOME Shell on X11

● pipewire-media-session.service                    not-found inactive dead pipewire-media-session.service

● pulseaudio.service                                not-found inactive dead pulseaudio.service

  snapd.session-agent.service                       loaded    inactive dead snapd user session agent

● systemd-oomd.service                              not-found inactive dead systemd-oomd.service

  systemd-tmpfiles-clean.service                    loaded    inactive dead Cleanup of User's Temporary Files and >

  background.slice                                  loaded    inactive dead User Background Tasks Slice           >

● pulseaudio.socket                                 not-found inactive dead pulseaudio.socket                     >

● blockdev@dev-loop0.target                         not-found inactive dead blockdev@dev-loop0.target

● blockdev@dev-loop1.target                         not-found inactive dead blockdev@dev-loop1.target

● blockdev@dev-loop10.target                        not-found inactive dead blockdev@dev-loop10.target

● blockdev@dev-loop11.target                        not-found inactive dead blockdev@dev-loop11.target

● blockdev@dev-loop2.target                         not-found inactive dead blockdev@dev-loop2.target

● blockdev@dev-loop3.target                         not-found inactive dead blockdev@dev-loop3.target

lines 1-25

  UNIT                                              LOAD      ACTIVE   SUB  DESCRIPTION                            >

  gnome-initial-setup-copy-worker.service           loaded    inactive dead GNOME Initial Setup Copy Worker

  gnome-initial-setup-first-login.service           loaded    inactive dead GNOME Initial Setup

● gnome-initial-setup.service                       not-found inactive dead gnome-initial-setup.service

  gnome-session-failed.service                      loaded    inactive dead GNOME Session Failed lockdown screen (u>

  gnome-session-manager@gnome-initial-setup.service loaded    inactive dead GNOME Session Manager (session: gnome-i>

  gnome-session-manager@gnome-login.service         loaded    inactive dead GNOME Session Manager (session: gnome-l>

  gnome-session-restart-dbus.service                loaded    inactive dead Restart DBus after GNOME Session shutdo>

  gnome-session-signal-init.service                 loaded    inactive dead Signal initialization done to GNOME Ses>

  grub-boot-success.service                         loaded    inactive dead Mark boot as successful

  org.gnome.Shell-disable-extensions.service        loaded    inactive dead Disable GNOME Shell extensions after fa>

  org.gnome.Shell@x11.service                       loaded    inactive dead GNOME Shell on X11

● pipewire-media-session.service                    not-found inactive dead pipewire-media-session.service

● pulseaudio.service                                not-found inactive dead pulseaudio.service

  snapd.session-agent.service                       loaded    inactive dead snapd user session agent

● systemd-oomd.service                              not-found inactive dead systemd-oomd.service

  systemd-tmpfiles-clean.service                    loaded    inactive dead Cleanup of User's Temporary Files and D>

  background.slice                                  loaded    inactive dead User Background Tasks Slice            >

● pulseaudio.socket                                 not-found inactive dead pulseaudio.socket                      >

● blockdev@dev-loop0.target                         not-found inactive dead blockdev@dev-loop0.target

● blockdev@dev-loop1.target                         not-found inactive dead blockdev@dev-loop1.target

● blockdev@dev-loop10.target                        not-found inactive dead blockdev@dev-loop10.target

● blockdev@dev-loop11.target                        not-found inactive dead blockdev@dev-loop11.target

● blockdev@dev-loop2.target                         not-found inactive dead blockdev@dev-loop2.target

● blockdev@dev-loop3.target                         not-found inactive dead blockdev@dev-loop3.target

lines 1-25

  UNIT                                              LOAD      ACTIVE   SUB  DESCRIPTION                             >

  gnome-initial-setup-copy-worker.service           loaded    inactive dead GNOME Initial Setup Copy Worker

  gnome-initial-setup-first-login.service           loaded    inactive dead GNOME Initial Setup

● gnome-initial-setup.service                       not-found inactive dead gnome-initial-setup.service

  gnome-session-failed.service                      loaded    inactive dead GNOME Session Failed lockdown screen (us>

  gnome-session-manager@gnome-initial-setup.service loaded    inactive dead GNOME Session Manager (session: gnome-in>

  gnome-session-manager@gnome-login.service         loaded    inactive dead GNOME Session Manager (session: gnome-lo>

  gnome-session-restart-dbus.service                loaded    inactive dead Restart DBus after GNOME Session shutdown

  gnome-session-signal-init.service                 loaded    inactive dead Signal initialization done to GNOME Sess>

  grub-boot-success.service                         loaded    inactive dead Mark boot as successful

  org.gnome.Shell-disable-extensions.service        loaded    inactive dead Disable GNOME Shell extensions after fai>

  org.gnome.Shell@x11.service                       loaded    inactive dead GNOME Shell on X11

● pipewire-media-session.service                    not-found inactive dead pipewire-media-session.service

● pulseaudio.service                                not-found inactive dead pulseaudio.service

  snapd.session-agent.service                       loaded    inactive dead snapd user session agent

● systemd-oomd.service                              not-found inactive dead systemd-oomd.service

  systemd-tmpfiles-clean.service                    loaded    inactive dead Cleanup of User's Temporary Files and Di>

  background.slice                                  loaded    inactive dead User Background Tasks Slice             >

● pulseaudio.socket                                 not-found inactive dead pulseaudio.socket                       >

● blockdev@dev-loop0.target                         not-found inactive dead blockdev@dev-loop0.target

● blockdev@dev-loop1.target                         not-found inactive dead blockdev@dev-loop1.target

● blockdev@dev-loop10.target                        not-found inactive dead blockdev@dev-loop10.target

● blockdev@dev-loop11.target                        not-found inactive dead blockdev@dev-loop11.target

● blockdev@dev-loop2.target                         not-found inactive dead blockdev@dev-loop2.target

● blockdev@dev-loop3.target                         not-found inactive dead blockdev@dev-loop3.target

lines 1-25

  UNIT                                              LOAD      ACTIVE   SUB  DESCRIPTION                              >

  gnome-initial-setup-copy-worker.service           loaded    inactive dead GNOME Initial Setup Copy Worker

  gnome-initial-setup-first-login.service           loaded    inactive dead GNOME Initial Setup

● gnome-initial-setup.service                       not-found inactive dead gnome-initial-setup.service

  gnome-session-failed.service                      loaded    inactive dead GNOME Session Failed lockdown screen (use>

  gnome-session-manager@gnome-initial-setup.service loaded    inactive dead GNOME Session Manager (session: gnome-ini>

  gnome-session-manager@gnome-login.service         loaded    inactive dead GNOME Session Manager (session: gnome-log>

  gnome-session-restart-dbus.service                loaded    inactive dead Restart DBus after GNOME Session shutdown

  gnome-session-signal-init.service                 loaded    inactive dead Signal initialization done to GNOME Sessi>

  grub-boot-success.service                         loaded    inactive dead Mark boot as successful

  org.gnome.Shell-disable-extensions.service        loaded    inactive dead Disable GNOME Shell extensions after fail>

  org.gnome.Shell@x11.service                       loaded    inactive dead GNOME Shell on X11

● pipewire-media-session.service                    not-found inactive dead pipewire-media-session.service

● pulseaudio.service                                not-found inactive dead pulseaudio.service

  snapd.session-agent.service                       loaded    inactive dead snapd user session agent

● systemd-oomd.service                              not-found inactive dead systemd-oomd.service

  systemd-tmpfiles-clean.service                    loaded    inactive dead Cleanup of User's Temporary Files and Dir>

  background.slice                                  loaded    inactive dead User Background Tasks Slice              >

● pulseaudio.socket                                 not-found inactive dead pulseaudio.socket                        >

● blockdev@dev-loop0.target                         not-found inactive dead blockdev@dev-loop0.target

● blockdev@dev-loop1.target                         not-found inactive dead blockdev@dev-loop1.target

● blockdev@dev-loop10.target                        not-found inactive dead blockdev@dev-loop10.target

● blockdev@dev-loop11.target                        not-found inactive dead blockdev@dev-loop11.target

● blockdev@dev-loop2.target                         not-found inactive dead blockdev@dev-loop2.target

● blockdev@dev-loop3.target                         not-found inactive dead blockdev@dev-loop3.target

lines 1-25

  UNIT                                              LOAD      ACTIVE   SUB  DESCRIPTION                               >

  gnome-initial-setup-copy-worker.service           loaded    inactive dead GNOME Initial Setup Copy Worker

  gnome-initial-setup-first-login.service           loaded    inactive dead GNOME Initial Setup

● gnome-initial-setup.service                       not-found inactive dead gnome-initial-setup.service

  gnome-session-failed.service                      loaded    inactive dead GNOME Session Failed lockdown screen (user)

  gnome-session-manager@gnome-initial-setup.service loaded    inactive dead GNOME Session Manager (session: gnome-init>

  gnome-session-manager@gnome-login.service         loaded    inactive dead GNOME Session Manager (session: gnome-logi>

  gnome-session-restart-dbus.service                loaded    inactive dead Restart DBus after GNOME Session shutdown

  gnome-session-signal-init.service                 loaded    inactive dead Signal initialization done to GNOME Sessio>

  grub-boot-success.service                         loaded    inactive dead Mark boot as successful

  org.gnome.Shell-disable-extensions.service        loaded    inactive dead Disable GNOME Shell extensions after failu>

  org.gnome.Shell@x11.service                       loaded    inactive dead GNOME Shell on X11

● pipewire-media-session.service                    not-found inactive dead pipewire-media-session.service

● pulseaudio.service                                not-found inactive dead pulseaudio.service

  snapd.session-agent.service                       loaded    inactive dead snapd user session agent

● systemd-oomd.service                              not-found inactive dead systemd-oomd.service

  systemd-tmpfiles-clean.service                    loaded    inactive dead Cleanup of User's Temporary Files and Dire>

  background.slice                                  loaded    inactive dead User Background Tasks Slice               >

● pulseaudio.socket                                 not-found inactive dead pulseaudio.socket                         >

● blockdev@dev-loop0.target                         not-found inactive dead blockdev@dev-loop0.target

● blockdev@dev-loop1.target                         not-found inactive dead blockdev@dev-loop1.target

● blockdev@dev-loop10.target                        not-found inactive dead blockdev@dev-loop10.target

● blockdev@dev-loop11.target                        not-found inactive dead blockdev@dev-loop11.target

● blockdev@dev-loop2.target                         not-found inactive dead blockdev@dev-loop2.target

● blockdev@dev-loop3.target                         not-found inactive dead blockdev@dev-loop3.target

lines 1-25

  UNIT                                              LOAD      ACTIVE   SUB  DESCRIPTION                                >

  gnome-initial-setup-copy-worker.service           loaded    inactive dead GNOME Initial Setup Copy Worker

  gnome-initial-setup-first-login.service           loaded    inactive dead GNOME Initial Setup

● gnome-initial-setup.service                       not-found inactive dead gnome-initial-setup.service

  gnome-session-failed.service                      loaded    inactive dead GNOME Session Failed lockdown screen (user)

  gnome-session-manager@gnome-initial-setup.service loaded    inactive dead GNOME Session Manager (session: gnome-initi>

  gnome-session-manager@gnome-login.service         loaded    inactive dead GNOME Session Manager (session: gnome-login)

  gnome-session-restart-dbus.service                loaded    inactive dead Restart DBus after GNOME Session shutdown

  gnome-session-signal-init.service                 loaded    inactive dead Signal initialization done to GNOME Session>

  grub-boot-success.service                         loaded    inactive dead Mark boot as successful

  org.gnome.Shell-disable-extensions.service        loaded    inactive dead Disable GNOME Shell extensions after failure

  org.gnome.Shell@x11.service                       loaded    inactive dead GNOME Shell on X11

● pipewire-media-session.service                    not-found inactive dead pipewire-media-session.service

● pulseaudio.service                                not-found inactive dead pulseaudio.service

  snapd.session-agent.service                       loaded    inactive dead snapd user session agent

● systemd-oomd.service                              not-found inactive dead systemd-oomd.service

  systemd-tmpfiles-clean.service                    loaded    inactive dead Cleanup of User's Temporary Files and Direc>

  background.slice                                  loaded    inactive dead User Background Tasks Slice                >

● pulseaudio.socket                                 not-found inactive dead pulseaudio.socket                          >

● blockdev@dev-loop0.target                         not-found inactive dead blockdev@dev-loop0.target

● blockdev@dev-loop1.target                         not-found inactive dead blockdev@dev-loop1.target

● blockdev@dev-loop10.target                        not-found inactive dead blockdev@dev-loop10.target

● blockdev@dev-loop11.target                        not-found inactive dead blockdev@dev-loop11.target

● blockdev@dev-loop2.target                         not-found inactive dead blockdev@dev-loop2.target

● blockdev@dev-loop3.target                         not-found inactive dead blockdev@dev-loop3.target

lines 1-25

  UNIT                                              LOAD      ACTIVE   SUB  DESCRIPTION                                 >

  gnome-initial-setup-copy-worker.service           loaded    inactive dead GNOME Initial Setup Copy Worker

  gnome-initial-setup-first-login.service           loaded    inactive dead GNOME Initial Setup

● gnome-initial-setup.service                       not-found inactive dead gnome-initial-setup.service

  gnome-session-failed.service                      loaded    inactive dead GNOME Session Failed lockdown screen (user)

  gnome-session-manager@gnome-initial-setup.service loaded    inactive dead GNOME Session Manager (session: gnome-initia>

  gnome-session-manager@gnome-login.service         loaded    inactive dead GNOME Session Manager (session: gnome-login)

  gnome-session-restart-dbus.service                loaded    inactive dead Restart DBus after GNOME Session shutdown

  gnome-session-signal-init.service                 loaded    inactive dead Signal initialization done to GNOME Session >

  grub-boot-success.service                         loaded    inactive dead Mark boot as successful

  org.gnome.Shell-disable-extensions.service        loaded    inactive dead Disable GNOME Shell extensions after failure

  org.gnome.Shell@x11.service                       loaded    inactive dead GNOME Shell on X11

● pipewire-media-session.service                    not-found inactive dead pipewire-media-session.service

● pulseaudio.service                                not-found inactive dead pulseaudio.service

  snapd.session-agent.service                       loaded    inactive dead snapd user session agent

● systemd-oomd.service                              not-found inactive dead systemd-oomd.service

  systemd-tmpfiles-clean.service                    loaded    inactive dead Cleanup of User's Temporary Files and Direct>

  background.slice                                  loaded    inactive dead User Background Tasks Slice                 >

● pulseaudio.socket                                 not-found inactive dead pulseaudio.socket                           >

● blockdev@dev-loop0.target                         not-found inactive dead blockdev@dev-loop0.target

● blockdev@dev-loop1.target                         not-found inactive dead blockdev@dev-loop1.target

● blockdev@dev-loop10.target                        not-found inactive dead blockdev@dev-loop10.target

● blockdev@dev-loop11.target                        not-found inactive dead blockdev@dev-loop11.target

● blockdev@dev-loop2.target                         not-found inactive dead blockdev@dev-loop2.target

● blockdev@dev-loop3.target                         not-found inactive dead blockdev@dev-loop3.target

lines 1-25...skipping...

  UNIT                                              LOAD      ACTIVE   SUB  DESCRIPTION                                 >

  gnome-initial-setup-copy-worker.service           loaded    inactive dead GNOME Initial Setup Copy Worker

  gnome-initial-setup-first-login.service           loaded    inactive dead GNOME Initial Setup

● gnome-initial-setup.service                       not-found inactive dead gnome-initial-setup.service

  gnome-session-failed.service                      loaded    inactive dead GNOME Session Failed lockdown screen (user)

  gnome-session-manager@gnome-initial-setup.service loaded    inactive dead GNOME Session Manager (session: gnome-initia>

  gnome-session-manager@gnome-login.service         loaded    inactive dead GNOME Session Manager (session: gnome-login)

  gnome-session-restart-dbus.service                loaded    inactive dead Restart DBus after GNOME Session shutdown

  gnome-session-signal-init.service                 loaded    inactive dead Signal initialization done to GNOME Session >

  grub-boot-success.service                         loaded    inactive dead Mark boot as successful

  org.gnome.Shell-disable-extensions.service        loaded    inactive dead Disable GNOME Shell extensions after failure

  org.gnome.Shell@x11.service                       loaded    inactive dead GNOME Shell on X11

● pipewire-media-session.service                    not-found inactive dead pipewire-media-session.service

● pulseaudio.service                                not-found inactive dead pulseaudio.service

  snapd.session-agent.service                       loaded    inactive dead snapd user session agent

● systemd-oomd.service                              not-found inactive dead systemd-oomd.service

  systemd-tmpfiles-clean.service                    loaded    inactive dead Cleanup of User's Temporary Files and Direct>

  background.slice                                  loaded    inactive dead User Background Tasks Slice                 >

● pulseaudio.socket                                 not-found inactive dead pulseaudio.socket                           >

● blockdev@dev-loop0.target                         not-found inactive dead blockdev@dev-loop0.target

● blockdev@dev-loop1.target                         not-found inactive dead blockdev@dev-loop1.target

● blockdev@dev-loop10.target                        not-found inactive dead blockdev@dev-loop10.target

● blockdev@dev-loop11.target                        not-found inactive dead blockdev@dev-loop11.target

● blockdev@dev-loop2.target                         not-found inactive dead blockdev@dev-loop2.target

● blockdev@dev-loop3.target                         not-found inactive dead blockdev@dev-loop3.target

● blockdev@dev-loop4.target                         not-found inactive dead blockdev@dev-loop4.target

lines 1-26

  UNIT                                              LOAD      ACTIVE   SUB  DESCRIPTION                                  >

  gnome-initial-setup-copy-worker.service           loaded    inactive dead GNOME Initial Setup Copy Worker

  gnome-initial-setup-first-login.service           loaded    inactive dead GNOME Initial Setup

● gnome-initial-setup.service                       not-found inactive dead gnome-initial-setup.service

  gnome-session-failed.service                      loaded    inactive dead GNOME Session Failed lockdown screen (user)

  gnome-session-manager@gnome-initial-setup.service loaded    inactive dead GNOME Session Manager (session: gnome-initial>

  gnome-session-manager@gnome-login.service         loaded    inactive dead GNOME Session Manager (session: gnome-login)

  gnome-session-restart-dbus.service                loaded    inactive dead Restart DBus after GNOME Session shutdown

  gnome-session-signal-init.service                 loaded    inactive dead Signal initialization done to GNOME Session M>

  grub-boot-success.service                         loaded    inactive dead Mark boot as successful

  org.gnome.Shell-disable-extensions.service        loaded    inactive dead Disable GNOME Shell extensions after failure

  org.gnome.Shell@x11.service                       loaded    inactive dead GNOME Shell on X11

● pipewire-media-session.service                    not-found inactive dead pipewire-media-session.service

● pulseaudio.service                                not-found inactive dead pulseaudio.service

  snapd.session-agent.service                       loaded    inactive dead snapd user session agent

● systemd-oomd.service                              not-found inactive dead systemd-oomd.service

  systemd-tmpfiles-clean.service                    loaded    inactive dead Cleanup of User's Temporary Files and Directo>

  background.slice                                  loaded    inactive dead User Background Tasks Slice                  >

● pulseaudio.socket                                 not-found inactive dead pulseaudio.socket                            >

● blockdev@dev-loop0.target                         not-found inactive dead blockdev@dev-loop0.target

● blockdev@dev-loop1.target                         not-found inactive dead blockdev@dev-loop1.target

● blockdev@dev-loop10.target                        not-found inactive dead blockdev@dev-loop10.target

● blockdev@dev-loop11.target                        not-found inactive dead blockdev@dev-loop11.target

● blockdev@dev-loop2.target                         not-found inactive dead blockdev@dev-loop2.target

● blockdev@dev-loop3.target                         not-found inactive dead blockdev@dev-loop3.target

● blockdev@dev-loop4.target   

● blockdev@dev-loop5.target                         not-found inactive dead blockdev@dev-loop5.target

● blockdev@dev-loop6.target                         not-found inactive dead blockdev@dev-loop6.target

● blockdev@dev-loop7.target                         not-found inactive dead blockdev@dev-loop7.target

● blockdev@dev-loop8.target                         not-found inactive dead blockdev@dev-loop8.target

● blockdev@dev-loop9.target                         not-found inactive dead blockdev@dev-loop9.target

● blockdev@dev-nvme0n1p1.target                     not-found inactive dead blockdev@dev-nvme0n1p1.target

● blockdev@dev-nvme0n1p2.target                     not-found inactive dead blockdev@dev-nvme0n1p2.target

● blockdev@dev-nvme0n1p3.target                     not-found inactive dead blockdev@dev-nvme0n1p3.target

● blockdev@dev-sda1.target                          not-found inactive dead blockdev@dev-sda1.target

● blockdev@dev-sda2.target                          not-found inactive dead blockdev@dev-sda2.target

● blockdev@dev-sdb1.target                          not-found inactive dead blockdev@dev-sdb1.target

● blockdev@dev-sdc1.target                          not-found inactive dead blockdev@dev-sdc1.target

● blockdev@dev-zram0.target                         not-found inactive dead blockdev@dev-zram0.target

  bluetooth.target                                  loaded    inactive dead Bluetooth

  gnome-session-failed.target                       loaded    inactive dead GNOME Session Failed

  gnome-session-shutdown.target                     loaded    inactive dead Shutdown running GNOME Session

  gnome-session@gnome-initial-setup.target          loaded    inactive dead GNOME Session (session: gnome-initial-setup)

  gnome-session@gnome-login.target                  loaded    inactive dead GNOME Session (session: gnome-login)

  printer.target                                    loaded    inactive dead Printer

  shutdown.target                                   loaded    inactive dead Shutdown

  sound.target                                      loaded    inactive dead Sound Card

            et la seconde rien du tout

            Bref se linux avait détecté des choses dans un temps mais je ne me souviens plus de quoi

            Merci à vous deux !

            • Dans pipewire / enregistrement audio : un sample rate par carte son ?

              xylphute Juste pour ma culture, quel reel avantage a travailler en 96kHz et sup?

              À vrai dire, je ne suis pas sûr, je posais la question moi-même. Si j’en crois cette article :
              https://crumplepop.com/what-sample-rate-should-i-record-at/

              “When it comes to mixing and mastering music, for instance, it’s essential to have as much data as possible and capture every frequency, which engineers can use to deliver the perfect sound. Even though these ultrasonic frequencies can’t be heard, they still interact and create intermodulation distortion that’s clearly audible.”

              Mais cela semble être + un truc d’ingé du son. Pas sûr que j’en bénéficie à mon niveau ^^
              Dans tous les cas, @Refuznik @xylphute, merci de vos réponses !

              Je n’ai testé que la 2ème solution (pipecontrol), mais cela semble jouable comme suit :

              1/ soit créér un script qui remplace dans pipewire.conf la définition du sample rate en 96000 khz, relance pipewire puis lance ardour, pour remettre ensuite la conf normale en place (+relance pipewire) lorsqu’ardour exit.
              2/ compilation de pipecontrol (un poil relou, le dev est pas bavard quand à la méthode). C’est vraiment une application très très moche mais elle fait le boulot, alors je m’en contenterais ^^

              Enfin, passer ce topic en [solved] dès que j’aurais trouvé comment faire sur ce nouveau tout beau tout chaud forum.

              • Dans Support Fedora WS 38

                Je suis un peu d’accord avec @nouvo09 mais avec plus de forme comme le demande @xylphute.

                @jibel merci de ne pas dériver / divaguer sur chaque message et d’aller droit au but. Nous, on veut bien t’aider, mais on est inondé de détail qui au final complexifie la compréhension de ton problème. De plus, ta prose est déjà très compliquée à lire (te relies-tu seulement ?) donc plus c’est concis, mieux c’est compréhensible.

                • Dans Pas de son Fedora 38, Huawei Matebook 14s

                  Nicosss

                  Si j’ai bien compris je dois passer les commandes de @xylphute depuis le grub ? Je ne sais pas comment m’y prendre pour passer ces commandes depuis le grub.

                    • Dans Dépendances cassées MAJ 36 -> 37

                      v0str0yenVI Mais ton GNOME-shell il vient d’où ?

                      Sinon comme le dit @xylphute :

                      Tu supprimes UnitedRPMs :
                      # dnf remove unitedrpms\*

                      Tu installes le bon libmysofa :
                      # dnf install libmysofa --allowerasing

                      Si encore présent :
                      # dnf remove libmysofa-libs

                        • Dans Dépendances cassées MAJ 36 -> 37

                          xylphute Aussi… Mais dans ce cas @xylphute il faut bien penser à le remettre… Et comme c’est une dépendance de GNOME Shell, il y a un risque que l’environnement graphique plante.