mais j'aimerais avoir confirmation de votre part que cette méthode est fiable !Fabrication sous linux d'un CD bootable DOS pouvant contenir un utilitaire flash bios, firmware etc. :
Downloader le fichier FDOEM.144.gz (ou bien aller chercher des images dos http://www.freedos.org ou http://www.fdos.org etc.)ATTENTION : vous ne pourrez pas sauvegarder un backup de votre ancien biosgunzip FDOEM.144.gz mount -o loop -t vfat FDOEM.144 /mon_point_de_montage cp mon_flash_bios.exe /mon_point_de_montage umount /mon_point_de_montage mkisofs -o bootable-CD-bios.iso -b FDOEM.144 FDOEM.144 cdrecord dev=acces_a_mon_cd bootable-CD-bios.iso
Je pense que justement le fait que le CPU diffère peut changer la donne...cenomanien wrote:J'ai un PC de la même série (seul le CPU diffère légèrement), le ventilateur/refroidissement est correctement géré par Fedora 12.
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
05:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02)
06:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.31.5-127.fc12.i686 (mockbuild@x86-3.fedora.phx.redhat.com) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7) (GCC) ) #1 SMP Sat Nov 7 21:41:45 EST 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f4fe000 (usable)
BIOS-e820: 000000007f4fe000 - 000000007f509000 (reserved)
BIOS-e820: 000000007f509000 - 000000007f552000 (usable)
BIOS-e820: 000000007f552000 - 000000007f555000 (reserved)
BIOS-e820: 000000007f555000 - 000000007f5bb000 (usable)
BIOS-e820: 000000007f5bb000 - 000000007f5bf000 (reserved)
BIOS-e820: 000000007f5bf000 - 000000007f678000 (usable)
BIOS-e820: 000000007f678000 - 000000007f6bf000 (ACPI NVS)
BIOS-e820: 000000007f6bf000 - 000000007f700000 (ACPI data)
BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
DMI 2.4 present.
last_pfn = 0x7f678 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFFE0000 mask FFFFE0000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 07F800000 mask FFF800000 uncachable
3 base 07F700000 mask FFFF00000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 4194176KB, range: 128KB, type WP
reg 1, base: 0GB, range: 2GB, type WB
reg 2, base: 2040MB, range: 8MB, type UC
reg 3, base: 2039MB, range: 1MB, type UC
total RAM coverred: 2039M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2039MB, range: 1MB, type UC
reg 2, base: 2040MB, range: 8MB, type UC
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 01000000
init_memory_mapping: 0000000000000000-00000000373fe000
Using x86 segment limits to approximate NX protection
0000000000 - 0000400000 page 4k
0000400000 - 0037000000 page 2M
0037000000 - 00373fe000 page 4k
kernel direct mapping tables up to 373fe000 @ 7000-d000
RAMDISK: 37580000 - 37fef014
Allocated new RAMDISK: 00ac8000 - 01537014
Move RAMDISK from 0000000037580000 - 0000000037fef013 to 00ac8000 - 01537013
ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
ACPI: XSDT 7f6fe120 00064 (v01 ACRSYS ACRPRDCT 00000001 01000013)
ACPI: FACP 7f6fd000 000F4 (v04 ACRSYS ACRPRDCT 00000001 MSFT 01000013)
ACPI: DSDT 7f6f4000 084EA (v01 ACRSYS ACRPRDCT 00000001 MSFT 01000013)
ACPI: FACS 7f67b000 00040
ACPI: APIC 7f6f3000 00068 (v02 ACRSYS ACRPRDCT 00000001 MSFT 01000013)
ACPI: MCFG 7f6f2000 0003C (v01 ACRSYS ACRPRDCT 00000001 MSFT 01000013)
ACPI: SLIC 7f6f1000 00176 (v01 ACRSYS ACRPRDCT 00000001 MSFT 01000013)
ACPI: HPET 7f6f0000 00038 (v01 ACRSYS ACRPRDCT 00000001 MSFT 01000013)
ACPI: SSDT 7f6ef000 005D7 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 7f6ee000 004C4 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: SSDT 7f6ed000 00232 (v01 PmRef Cpu0Tst 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
1154MB HIGHMEM available.
883MB LOWMEM available.
mapped low ram: 0 - 373fe000
low ram: 0 - 373fe000
node 0 low ram: 00000000 - 373fe000
node 0 bootmap 0000a000 - 00010e80
(9 early reservations) ==> bootmem [0000000000 - 00373fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000400000 - 0000ac2a10] TEXT DATA BSS ==> [0000400000 - 0000ac2a10]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0000ac3000 - 0000ac719c] BRK ==> [0000ac3000 - 0000ac719c]
#6 [0000007000 - 000000a000] PGTABLE ==> [0000007000 - 000000a000]
#7 [0000ac8000 - 0001537014] NEW RAMDISK ==> [0000ac8000 - 0001537014]
#8 [000000a000 - 0000011000] BOOTMAP ==> [000000a000 - 0000011000]
found SMP MP-table at [c00fe1b0] fe1b0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000373fe
HighMem 0x000373fe -> 0x0007f678
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0007f4fe
0: 0x0007f509 -> 0x0007f552
0: 0x0007f555 -> 0x0007f5bb
0: 0x0007f5bf -> 0x0007f678
On node 0 totalpages: 521733
free_area_init_node: node 0, pgdat c0978340, node_mem_map c1538000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 1736 pages used for memmap
Normal zone: 220470 pages, LIFO batch:31
HighMem zone: 2309 pages used for memmap
HighMem zone: 293219 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages at c2532000, static data 34428 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517656
Kernel command line: ro root=/dev/mapper/vg_polo-vg_root noiswmd LANG=fr_FR.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=fr-latin9 rhgb quiet
PID hash table entries: 4096 (order: 12, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 10436960 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000373fe:0007f678)
Memory: 2040944k/2087392k available (3495k kernel code, 45128k reserved, 2169k data, 432k init, 1182112k highmem)
virtual kernel memory layout:
fixmap : 0xffad5000 - 0xfffff000 (5288 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
.init : 0xc0989000 - 0xc09f5000 ( 432 kB)
.data : 0xc0769f9b - 0xc0988568 (2169 kB)
.text : 0xc0400000 - 0xc0769f9b (3495 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
Fast TSC calibration using PIT
Detected 1729.227 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.45 BogoMIPS (lpj=1729227)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Counters: Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic counters: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose counters: 3
... counter mask: 0000000700000003
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20090521
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20202 entries in 40 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Celeron(R) CPU 530 @ 1.73GHz stepping 01
Brought up 1 CPUs
Total of 1 processors activated (3458.45 BogoMIPS).
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=352 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=500 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=192 bytes
sizeof(task_struct)=3256 bytes
CPU0 attaching NULL sched-domain.
Booting paravirtualized kernel on bare hardware
regulator: core version 0.5
Time: 10:14:15 Date: 11/19/09
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: No dock devices found.
ACPI Warning: \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 20090521 nspredef-328
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0x94000000-0x940fffff]
pci 0000:00:02.0: reg 18 64bit mmio: [0x80000000-0x8fffffff]
pci 0000:00:02.0: reg 20 io port: [0x5110-0x5117]
pci 0000:00:02.1: reg 10 64bit mmio: [0x000000-0x0fffff]
pci 0000:00:1a.0: reg 20 io port: [0x50c0-0x50df]
pci 0000:00:1a.1: reg 20 io port: [0x50a0-0x50bf]
pci 0000:00:1a.7: reg 10 32bit mmio: [0x98304c00-0x98304fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0x98300000-0x98303fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x5080-0x509f]
pci 0000:00:1d.1: reg 20 io port: [0x5060-0x507f]
pci 0000:00:1d.2: reg 20 io port: [0x5040-0x505f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0x98304800-0x98304bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 0003)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
pci 0000:00:1f.1: reg 10 io port: [0x5108-0x510f]
pci 0000:00:1f.1: reg 14 io port: [0x5124-0x5127]
pci 0000:00:1f.1: reg 18 io port: [0x5100-0x5107]
pci 0000:00:1f.1: reg 1c io port: [0x5120-0x5123]
pci 0000:00:1f.1: reg 20 io port: [0x50e0-0x50ef]
pci 0000:00:1f.2: reg 10 io port: [0x50f8-0x50ff]
pci 0000:00:1f.2: reg 14 io port: [0x511c-0x511f]
pci 0000:00:1f.2: reg 18 io port: [0x50f0-0x50f7]
pci 0000:00:1f.2: reg 1c io port: [0x5118-0x511b]
pci 0000:00:1f.2: reg 20 io port: [0x5020-0x503f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0x98304000-0x983047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0x98305000-0x983050ff]
pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f]
pci 0000:00:1c.0: bridge io port: [0x4000-0x4fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0x97300000-0x982fffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0x90000000-0x90ffffff]
pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.1: bridge 32bit mmio: [0x96300000-0x972fffff]
pci 0000:00:1c.1: bridge 64bit mmio pref: [0x91000000-0x91ffffff]
pci 0000:05:00.0: reg 10 64bit mmio: [0x95200000-0x9520ffff]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff]
pci 0000:00:1c.2: bridge 32bit mmio: [0x95200000-0x962fffff]
pci 0000:00:1c.2: bridge 64bit mmio pref: [0x92000000-0x92ffffff]
pci 0000:06:00.0: reg 10 64bit mmio: [0x94100000-0x9410ffff]
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.3: bridge io port: [0x1000-0x1fff]
pci 0000:00:1c.3: bridge 32bit mmio: [0x94100000-0x951fffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0x93000000-0x93ffffff]
pci 0000:00:1e.0: transparent bridge
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.3 BAR 13 (0x1000-0x1fff), disabling
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x600-0x60f has been reserved
system 00:01: ioport range 0x610-0x610 has been reserved
system 00:01: ioport range 0x800-0x80f has been reserved
system 00:01: ioport range 0x810-0x817 has been reserved
system 00:01: ioport range 0x400-0x47f has been reserved
system 00:01: ioport range 0x500-0x53f has been reserved
system 00:01: ioport range 0xff2c-0xff2f has been reserved
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:01: iomem range 0x32000000-0x320000ff could not be reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: 0x4000-0x4fff
pci 0000:00:1c.0: MEM window: 0x97300000-0x982fffff
pci 0000:00:1c.0: PREFETCH window: 0x00000090000000-0x00000090ffffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.1: IO window: 0x3000-0x3fff
pci 0000:00:1c.1: MEM window: 0x96300000-0x972fffff
pci 0000:00:1c.1: PREFETCH window: 0x00000091000000-0x00000091ffffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.2: IO window: 0x2000-0x2fff
pci 0000:00:1c.2: MEM window: 0x95200000-0x962fffff
pci 0000:00:1c.2: PREFETCH window: 0x00000092000000-0x00000092ffffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.3: IO window: 0x1000-0x1fff
pci 0000:00:1c.3: MEM window: 0x94100000-0x951fffff
pci 0000:00:1c.3: PREFETCH window: 0x00000093000000-0x00000093ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:02: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:02: resource 1 mem: [0x97300000-0x982fffff]
pci_bus 0000:02: resource 2 pref mem [0x90000000-0x90ffffff]
pci_bus 0000:04: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:04: resource 1 mem: [0x96300000-0x972fffff]
pci_bus 0000:04: resource 2 pref mem [0x91000000-0x91ffffff]
pci_bus 0000:05: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:05: resource 1 mem: [0x95200000-0x962fffff]
pci_bus 0000:05: resource 2 pref mem [0x92000000-0x92ffffff]
pci_bus 0000:06: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:06: resource 1 mem: [0x94100000-0x951fffff]
pci_bus 0000:06: resource 2 pref mem [0x93000000-0x93ffffff]
pci_bus 0000:07: resource 3 io: [0x00-0xffff]
pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Switched to high resolution mode on CPU 0
Freeing initrd memory: 10684k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1258625655.538:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1699
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Firmware did not grant requested _OSC control
Firmware did not grant requested _OSC control
Firmware did not grant requested _OSC control
Firmware did not grant requested _OSC control
Firmware did not grant requested _OSC control
Firmware did not grant requested _OSC control
Firmware did not grant requested _OSC control
Firmware did not grant requested _OSC control
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
decode_hpp: Could not get hotplug parameters. Use defaults
acpiphp: Slot [1] registered
ACPI: AC Adapter [AC] (off-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (0 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
ACPI: Battery Slot [BAT0] (battery present)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected 7676K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input4
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0x98304000 port 0x98304100 irq 28
ata2: SATA max UDMA/133 abar m2048@0x98304000 port 0x98304180 irq 28
ata3: DUMMY
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50e0 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50e8 irq 15
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0x98304c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31.5-127.fc12.i686 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0x98304800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31.5-127.fc12.i686 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000050c0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.31.5-127.fc12.i686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x000050a0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.31.5-127.fc12.i686 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00005080
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.31.5-127.fc12.i686 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005060
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.31.5-127.fc12.i686 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.31.5-127.fc12.i686 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
Magic number: 1:685:224
rtc_cmos 00:03: setting system clock to 2009-11-19 10:14:16 UTC (1258625656)
Initalizing network drop monitor service
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
ata4.00: ATAPI: PIONEER DVD-RW DVR-K17RS, 1.02, max UDMA/33
ata4.00: configured for UDMA/33
Clocksource tsc unstable (delta = -103823158 ns)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: ATA-8: WDC WD1200BEVS-22UST0, 01.01A01, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD1200BEVS-2 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 3:0:0:0: CD-ROM PIONEER DVD-RW DVR-K17RS 1.02 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
Freeing unused kernel memory: 432k freed
Write protecting the kernel text: 3496k
Write protecting the kernel read-only data: 1696k
dracut: dracut-002-13.4.git8f397a9b.fc12
usb 2-4: new high speed USB device using ehci_hcd and address 2
udev: starting version 145
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 29 for MSI/MSI-X
usb 2-4: New USB device found, idVendor=064e, idProduct=a101
usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 2-4: Product: Acer CrystalEye webcam
usb 2-4: Manufacturer: SuYin
usb 2-4: SerialNumber: CN0314-OV03-VA-R02.00.00
usb 2-4: configuration #1 chosen from 1 choice
[drm] TV-14: set mode NTSC 480i 0
fbcon: inteldrmfb (fb0) is primary device
[drm] LVDS-8: set mode 1280x800 1d
Console: switching to colour frame buffer device 160x50
fb0: inteldrmfb frame buffer device
registered panic notifier
input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7
acpi device:3c: registered as cooling_device1
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:39/input/input8
ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
dracut: Starting plymouth daemon
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
dracut: rd_NO_MDIMSM: no MD RAID for imsm/isw raids
dracut: Scanning devices sda2 for LVM volume groups
dracut: Reading all physical volumes. This may take a while...
dracut: Found volume group "vg_polo" using metadata type lvm2
dracut: 3 logical volume(s) in volume group "vg_polo" now active
EXT4-fs (dm-1): barriers enabled
kjournald2 starting: pid 253, dev dm-1:8, commit interval 5 seconds
EXT4-fs (dm-1): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (dm-1): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/mapper/vg_polo-vg_root
dracut: Loading SELinux policy
type=1404 audit(1258625660.055:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 144734 rules.
SELinux: 8192 avtab hash slots, 144734 rules.
SELinux: 8 users, 12 roles, 2941 types, 136 bools, 1 sens, 1024 cats
SELinux: 75 classes, 144734 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-1, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1258625660.430:3): policy loaded auid=4294967295 ses=4294967295
dracut: Switching root
udev: starting version 145
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
iTCO_vendor_support: vendor-support=0
tg3.c:v3.99 (April 20, 2009)
tg3 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
tg3 0000:05:00.0: setting latency timer to 64
tg3 0000:05:00.0: PME# disabled
ACPI: WMI: Mapper loaded
acer-wmi: Acer Laptop ACPI-WMI Extras
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
cfg80211: Calling CRDA to update world regulatory domain
acer-wmi: Brightness must be controlled by generic video driver
type=1400 audit(1258625665.586:4): avc: denied { mmap_zero } for pid=350 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect
acerhdf: Acer Aspire One Fan driver, v.0.5.13
acerhdf: no Aspire One hardware found
eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1b:38:68:36:d1
eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
Linux video capture interface: v2.00
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ath5k 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ath5k 0000:06:00.0: setting latency timer to 64
ath5k 0000:06:00.0: registered as 'phy0'
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
uvcvideo: Found UVC 1.00 device Acer CrystalEye webcam (064e:a101)
input: Acer CrystalEye webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
phy0: Selected rate control algorithm 'minstrel'
Registered led device: ath5k-phy0::rx
Registered led device: ath5k-phy0::tx
ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
cfg80211: Calling CRDA for country: FR
cfg80211: Regulatory domain changed to country: FR
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
device-mapper: multipath: version 1.1.0 loaded
EXT4-fs (dm-1): internal journal on dm-1:8
EXT4-fs (sda1): barriers enabled
kjournald2 starting: pid 718, dev sda1:8, commit interval 5 seconds
EXT4-fs (sda1): internal journal on sda1:8
EXT4-fs (sda1): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sda1): mounted filesystem with ordered data mode
SELinux: initialized (dev sda1, type ext4), uses xattr
EXT4-fs (dm-0): barriers enabled
kjournald2 starting: pid 719, dev dm-0:8, commit interval 5 seconds
EXT4-fs (dm-0): internal journal on dm-0:8
EXT4-fs (dm-0): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (dm-0): mounted filesystem with ordered data mode
SELinux: initialized (dev dm-0, type ext4), uses xattr
Adding 2097144k swap on /dev/mapper/vg_polo-vg_swap. Priority:-1 extents:1 across:2097144k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
microcode: CPU0 sig=0x10661, pf=0x80, revision=0x33
platform microcode: firmware: requesting intel-ucode/06-16-01
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Microcode Update Driver: v2.00 removed.
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
tg3 0000:05:00.0: PME# disabled
tg3 0000:05:00.0: irq 30 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
[drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
metacity[1324]: segfault at 616d2078 ip 00b079e1 sp bf9bd1c0 error 6 in libSM.so.6.0.0[b06000+7000]
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
fuse init (API version 7.12)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
wlan0: authenticate with AP 00:15:70:5a:5e:0f
wlan0: authenticated
wlan0: associate with AP 00:15:70:5a:5e:0f
wlan0: RX AssocResp from 00:15:70:5a:5e:0f (capab=0x1 status=0 aid=6)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: FR
cfg80211: Current regulatory domain updated by AP to: FR
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
wlan0: no IPv6 routers present