lol bienvenue alors!!!!

avec le menu.lst de Ubuntu tu selectionnes "Windows" pour lancer windows? ou "other"?
Si c'est Windows et bien tu n'as plus qu'à remettre le menu.lst de Fedora et modifier le chainloader pour windows comme ca:

title Windows
root (hd0,1)
savedefault
makeactive
chainloader +1

à mon avis ton problème venait du fait que le kmod-ndiswrapper n'était pas celui compatible avec le nouveau noyau de F9.
D'où la mise à jour.

Bonjour à tous,

Pour moi téléchargement du DVD 1h30 (free powaaa) puis install en lieu et pladce de F8. Installation sans soucis premier boot impeccable. Tout fonctionne. Je n'ai pas encore eu le temps de m'attarder sur les vraies nouveautés.

ok.

merci de ta réponse

Bonjour,

Savez vous quand Gnome 2.22 sera disponible dans les dépôts?

Bonjour,

Depuis quelques jours lorsque en surfant avec Konqueror j'obtiens un message comme quoi nspluginviewer a planté avec un code SIGSEGV.
Que dois-je faire?

Bonjour,

Je ne sais pas si je poste au bon endroit. Si ca n'est pas le cas merci aux modérateurs de déplacer dans la bonne section.
Voilà utilisateur heureux de Fedora depuis la FC4, je souhaite regarder ce qui se passe un peu ailleurs.
Pour celà j'ai décidé de m'installer une petite Debian en double boot avec ma chère F8.
Seulement voilà mes connaissances en matière de partionnement spécifique ne sont pas très étendues.
je demande donc à ceux qui connaissent Partman de m'aider à selectionner la bonne méthode afin de faire cohabiter au mieux les 2 OS de manière à ce qu'au boot je puisse choisir entre les 2.
Sachant que mon partionnement actuel a été fait de manière automatique par Anaconda. Donc pas de partition dédiée pour /boot.

merci pour ton aide Eddy.
tout fontionne parfaitement

je tente l'install et j'ai ce type de conflits:

le fichier /lib/modules/2.6.23.1-49.fc8/kernel/sound/usb/usx2y/snd-usb-usx2y.ko de l'installation de kernel-2.6.23.1-49.fc8 entre en conflit avec le fichier du paquetage kernel-2.6.23.1-49.fc8
le fichier /lib/modules/2.6.23.1-49.fc8/vdso/vdso-int80.so de l'installation de kernel-2.6.23.1-49.fc8 entre en conflit avec le fichier du paquetage kernel-2.6.23.1-49.fc8
le fichier /lib/modules/2.6.23.1-49.fc8/vdso/vdso-sysenter.so de l'installation de kernel-2.6.23.1-49.fc8 entre en conflit avec le fichier du paquetage kernel-2.6.23.1-49.fc8

faut il que je boot sur le kernel i686 en -42? mais j'ai peur de tout planter comme ca m'a fait une fois.
etant sur une architecture i686 pourquoi m'a t il telecharge un kernel pour i586?

oui effectivement ton astuce fonctionne. par contre ce qui est etrange c'est que sous F7 ca fonctionnait tout seul.

voila:

2.6.23.1-49.fc8

en fait lors du premier yum update après l'install il m'a téléchargé et installé cette version du kernel.

je ne comprends pas ce qui se passe sur mon systeme
voici ce que me propose yum:

[root@localhost ~]# yum list kern*
Installed Packages
kernel.i686 2.6.23.1-42.fc8 installed
kernel.i586 2.6.23.1-49.fc8 installed
Available Packages
kernel.i686 2.6.23.1-49.fc8 updates
kernel-PAE.i686 2.6.23.1-49.fc8 updates
kernel-PAE-debug.i686 2.6.23.1-49.fc8 updates
kernel-PAE-debug-devel.i686 2.6.23.1-49.fc8 updates
kernel-PAE-devel.i686 2.6.23.1-49.fc8 updates
kernel-debug.i686 2.6.23.1-49.fc8 updates
kernel-debug-devel.i686 2.6.23.1-49.fc8 updates
kernel-devel.i586 2.6.23.1-49.fc8 updates
kernel-devel.i686 2.6.23.1-49.fc8 updates
kernel-doc.noarch 2.6.23.1-49.fc8 updates
kernel-headers.i386 2.6.23.1-49.fc8 updates
kernel-xen.i686 2.6.21-2950.fc8 fedora
kernel-xen-2.6-doc.noarch 2.6.21-2950.fc8 fedora
kernel-xen-devel.i686 2.6.21-2950.fc8 fedora
[root@localhost ~]# yum update kernel
Setting up Update Process
Could not find update match for kernel
No Packages marked for Update

mon kernel d'origine est un i686 en -42 mon kernel actuel est un i586 en -49
il ne veut pas m'update le -49 en i686

:-D génial ca fonctionne parfaitement.
merci mille fois. je suis rééllement impressionné par la maîtrise que vous tous possédez de ce système.

lsmod:
Module Size Used by
i915 23745 2
drm 67029 3 i915
rfcomm 36825 2
l2cap 25537 9 rfcomm
autofs4 20421 2
sunrpc 140765 1
nf_conntrack_ipv4 11717 12
ipt_REJECT 7617 2
iptable_filter 6465 1
ip_tables 14213 1 iptable_filter
nf_conntrack_netbios_ns 6465 0
nf_conntrack_ftp 10977 0
nf_conntrack_ipv6 18769 12
xt_state 6081 24
nf_conntrack 51977 5 nf_conntrack_ipv4,nf_conntrack_netbios_ns,nf_conntrack_ftp,nf_conntrack_ipv6,xt_state
nfnetlink 8281 3 nf_conntrack_ipv4,nf_conntrack_ipv6,nf_conntrack
xt_tcpudp 6977 28
ip6t_ipv6header 6209 2
ip6t_REJECT 8257 2
ip6table_filter 6337 1
ip6_tables 15109 2 ip6t_ipv6header,ip6table_filter
x_tables 14277 7 ipt_REJECT,ip_tables,xt_state,xt_tcpudp,ip6t_ipv6header,ip6t_REJECT,ip6_tables
loop 16581 0
dm_multipath 18249 0
ipv6 245989 22 nf_conntrack_ipv6,ip6t_REJECT
snd_intel8x0 30429 3
snd_ac97_codec 92389 1 snd_intel8x0
ac97_bus 6081 1 snd_ac97_codec
snd_seq_dummy 6725 0
snd_seq_oss 29889 0
snd_seq_midi_event 9793 1 snd_seq_oss
snd_seq 44849 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 10061 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 37569 0
snd_mixer_oss 16705 2 snd_pcm_oss
snd_pcm 63685 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
parport_pc 26981 0
p54usb 16193 0
e100 33997 0
parport 32393 1 parport_pc
p54common 14145 1 p54usb
snd_timer 20549 2 snd_seq,snd_pcm
mii 8385 1 e100
snd 43461 13 snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
mac80211 112461 2 p54usb,p54common
soundcore 9633 2 snd
serio_raw 9029 0
pcspkr 6593 0
iTCO_wdt 13797 0
iTCO_vendor_support 7109 1 iTCO_wdt
i2c_i801 12113 0
snd_page_alloc 11337 2 snd_intel8x0,snd_pcm
i2c_core 21825 1 i2c_i801
cfg80211 10441 1 mac80211
button 10321 0
hci_usb 16605 2
bluetooth 49317 7 rfcomm,l2cap,hci_usb
joydev 11649 0
sg 31965 0
sr_mod 17509 0
cdrom 33888 1 sr_mod
dm_snapshot 17765 0
dm_zero 5825 0
dm_mirror 21569 0
dm_mod 46209 9 dm_multipath,dm_snapshot,dm_zero,dm_mirror
ata_generic 8901 0
ata_piix 16709 2
libata 99633 2 ata_generic,ata_piix
sd_mod 27329 3
scsi_mod 119757 4 sg,sr_mod,libata,sd_mod
ext3 110665 2
jbd 52457 1 ext3
mbcache 10177 1 ext3
uhci_hcd 23633 0
ohci_hcd 21445 0
ehci_hcd 31693 0

dmesg

Linux version 2.6.23.1-49.fc8 (kojibuilder@xenbuilder1.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Thu Nov 8 21:16:34 EST 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fe70000 (usable)
BIOS-e820: 000000000fe70000 - 000000000fe72000 (ACPI NVS)
BIOS-e820: 000000000fe72000 - 000000000fe93000 (ACPI data)
BIOS-e820: 000000000fe93000 - 000000000ff00000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
254MB LOWMEM available.
found SMP MP-table at 000fe710
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 65136) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 65136
HighMem 65136 -> 65136
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 65136
On node 0 totalpages: 65136
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 476 pages used for memmap
Normal zone: 60564 pages, LIFO batch:15
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000FEB90, 0014 (r0 DELL )
ACPI: RSDT 000FD1EB, 0034 (r1 DELL 170L 8 ASL 61)
ACPI: FACP 000FD21F, 0074 (r1 DELL 170L 8 ASL 61)
ACPI: DSDT FFFCFB88, 24C9 (r1 DELL dt_ex 1000 MSFT 100000D)
ACPI: FACS 0FE70000, 0040
ACPI: SSDT FFFD218E, 00BA (r1 DELL st_ex 1000 MSFT 100000D)
ACPI: APIC 000FD293, 006C (r1 DELL 170L 8 ASL 61)
ACPI: BOOT 000FD2FF, 0028 (r1 DELL 170L 8 ASL 61)
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 10000000 (gap: 0ff00000:eed00000)
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Built 1 zonelists in Zone order. Total pages: 64628
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07a8000 soft=c0788000
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 2660.115 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 249712k/260544k available (2184k kernel code, 10312k reserved, 1116k data, 280k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffc52000 - 0xfffff000 (3764 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
lowmem : 0xc0000000 - 0xcfe70000 ( 254 MB)
.init : 0xc073f000 - 0xc0785000 ( 280 kB)
.data : 0xc0622185 - 0xc0739544 (1116 kB)
.text : 0xc0400000 - 0xc0622185 (2184 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 5322.72 BogoMIPS (lpj=2661362)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebf3ff 00000000 00000000 0000b180 0000441d 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 14k freed
ACPI: Core revision 20070126
CPU0: Intel(R) Celeron(R) CPU 2.66GHz stepping 01
Total of 1 processors activated (5322.72 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=336 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=488 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=180 bytes
sizeof(task_struct)=1552 bytes
Booting paravirtualized kernel on bare hardware
Time: 11:18:33 Date: 11/18/07
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfbb51, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
HPET at base address 0xfed00000
PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0880-08bf claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Time: tsc clocksource has been installed.
pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:00: iomem range 0x100000-0xffffff could not be reserved
pnp: 00:00: iomem range 0x1000000-0xfe6ffff could not be reserved
pnp: 00:00: iomem range 0xc0000-0xfffff could not be reserved
pnp: 00:08: ioport range 0x800-0x85f has been reserved
pnp: 00:08: ioport range 0xc00-0xc7f has been reserved
pnp: 00:08: ioport range 0x860-0x8ff could not be reserved
PCI: Bridge: 0000:00:1e.0
IO window: d000-dfff
MEM window: fea00000-feafffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 98304 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 3577k freed
Simple Boot Flag value 0x87 read from CMOS RAM was invalid
Simple Boot Flag at 0x7a set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1195384713.693:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key A4DE2B791A1BC77E
- User ID: Red Hat, Inc. (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
PCI: Firmware left 0000:01:08.0 e100 interrupts enabled, disabling
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
agpgart: Detected an Intel 865 Chipset.
agpgart: Detected 892K stolen memory.
agpgart: AGP aperture is 128M @ 0xe8000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Magic number: 15:818:327
Freeing unused kernel memory: 280k freed
Write protecting the kernel read-only data: 844k
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 16, io mem 0xffa80800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000ff80
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000ff60
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000ff20
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-1: configuration #1 chosen from 1 choice
SCSI subsystem initialized
libata version 2.21 loaded.
ata_piix 0000:00:1f.1: version 2.12
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
ata1.00: ATA-6: WDC WD400BB-75JHC0, 06.01C06, max UDMA/100
ata1.00: 78125000 sectors, multi 8: LBA
ata1.00: configured for UDMA/100
ata2.00: ATAPI: _NEC DVD_RW ND-3570A, 1.11, max UDMA/33
usb 3-1: new low speed USB device using uhci_hcd and address 2
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA WDC WD400BB-75JH 06.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 78125000 512-byte hardware sectors (40000 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 78125000 512-byte hardware sectors (40000 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-3570A 1.11 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x0001fe00 ctl 0x0001fe12 bmdma 0x0001fea0 irq 19
ata4: SATA max UDMA/133 cmd 0x0001fe20 ctl 0x0001fe32 bmdma 0x0001fea8 irq 19
usb 3-1: configuration #1 chosen from 1 choice
input: MOSART Semi. Wireless Keyboard & Mouse as /class/input/input1
input: USB HID v1.10 Keyboard [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:1d.1-1
input: MOSART Semi. Wireless Keyboard & Mouse as /class/input/input2
input,hiddev96: USB HID v1.10 Mouse [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:1d.1-1
usb 4-1: new full speed USB device using uhci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1195384719.676:2): selinux=0 auid=4294967295
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [VBTN]
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
ACPI: PCI Interrupt 0000:00:1f.3 -> GSI 17 (level, low) -> IRQ 20
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
input: PC Speaker as /class/input/input5
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 20 (level, low) -> IRQ 21
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
e100: eth0: e100_probe: addr 0xfeaff000, irq 21, MAC addr 00:11:43:B5:1C:BA
p54usb: cannot find firmware (isl3887usb_bare)!
prism54usb: probe of 1-1:1.0 failed with error -2
usbcore: registered new interface driver prism54usb
ACPI: PCI Interrupt 0000:00:1f.5 -> GSI 17 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.5 to 64
AC'97 0 analog subsections not ready
intel8x0_measure_ac97_clock: measured 50420 usecs
intel8x0: clocking to 48000
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
device-mapper: multipath: version 1.0.5 loaded
loop: module loaded
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 524280k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:524280k
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
ip6_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
ADDRCONF(NETDEV_UP): eth0: link is not ready
audit(1195381142.563:3): audit_pid=1734 old=0 by auid=4294967295
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
ADDRCONF(NETDEV_UP): eth0: link is not ready
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized i915 1.6.0 20060119 on minor 0
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present

ls /lib/firmware

atmel_at76c502_3com.bin ipw2200-sniffer.fw
atmel_at76c502_3com-wpa.bin ipw-2.4-boot.fw
atmel_at76c502.bin ipw-2.4-bss.fw
atmel_at76c502d.bin ipw-2.4-bss_ucode.fw
atmel_at76c502d-wpa.bin ipw-2.4-ibss.fw
atmel_at76c502e.bin ipw-2.4-ibss_ucode.fw
atmel_at76c502e-wpa.bin ipw-2.4-sniffer.fw
atmel_at76c502-wpa.bin ipw-2.4-sniffer_ucode.fw
atmel_at76c503-i3861.bin is13887usb_bare
atmel_at76c503-i3863.bin iwlwifi-3945-1.ucode
atmel_at76c503-rfmd-acc.bin iwlwifi-3945.ucode
atmel_at76c503-rfmd.bin iwlwifi-4965-1.ucode
atmel_at76c504_2958-wpa.bin iwlwifi-4965.ucode
atmel_at76c504a_2958-wpa.bin LICENSE.ipw2100
atmel_at76c504.bin LICENSE.ipw2200
atmel_at76c504c-wpa.bin ql2100_fw.bin
atmel_at76c505a-rfmd2958.bin ql2200_fw.bin
atmel_at76c505-rfmd2958.bin ql2300_fw.bin
atmel_at76c505-rfmd.bin ql2322_fw.bin
atmel_at76c506.bin ql2400_fw.bin
atmel_at76c506-wpa.bin README
COPYING.atmel-firmware README.atmel-firmware
COPYRIGHT README-usb.atmel-firmware
COPYRIGHT-usb.atmel-firmware rt2561.bin
ipw2100-1.3.fw rt2561s.bin
ipw2100-1.3-i.fw rt2661.bin
ipw2100-1.3-p.fw rt73.bin
ipw2200-bss.fw zd1211
ipw2200-ibss.fw

merci pour ton aide en tout cas...

c'est ce que j'ai envie de faire mais le i586 sera t il supprimé?
de plus je crois que mon pilote ndiswrapper ne fonctionne pas sur le i686
en plus ce que je ne comprends pas pourquoi le programme d'install original n'installe t il pas le i686 par défaut

Bonjour ,

J'ai une petite question. certains programmes que j'installe par yum telechargent le kernel i686. La dernière fois que ca me l'a fait c'etait avec ndiswrapper.
J'ai eu un souci de conflit entre les 2 kernels i586 et i686.
Du coup je n'installe plus de programmes voulant m'installer le i686.
Quelle différence entre les 2 architectures? comment éviter le conflit de kernel?
mon pc est un celeron quel kernel est sensé lui correspondre?

oui je l'avais deja verifié:
wlanuig : driver installed
device (0CDE:0008) present (alternate driver: p54usb)