Fedora-Fr

fox765 · 7 juin 2010

Grâce à l'aide de balustre mon problème de wifi est définitivement solutionné.

Tout fonctionne à merveille et sans restart du PC

Mon cable ethernet est mis de côté
.
Comme quoi un cancre bien épaulé peut aboutir à ses fins.

Merci encore balustre, je note RESOLU pour ce post WiFI :hammer::hammer::hammer:

Je cherche à mettre RESOLU sur le titre du post en vain. Quelqu'un a la solution ? Merci

fox765 · 7 juin 2010

J'avais surtout vu: ERROR: modinfo: could not find module r8192se_pci !!!

Voila les retours, ça me semble + sympa....

[liveuser@localhost ~]$ su -
[root@localhost ~]# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

wlan0     802.11bgn  Nickname:"rtl8191SEVA2"
          Mode:Managed  Frequency=2.417 GHz  Access Point: Not-Associated   
          Bit Rate:300 Mb/s   
          Retry:on   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=10/100  Signal level=0 dBm  Noise level=-100 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

[root@localhost ~]# ifconfig wlan0 up
[root@localhost ~]# iwlist scan
lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

wlan0     Scan completed :
          Cell 01 - Address: 06:DE:7F:04:62:58
                    ESSID:"freeFox"
                    Protocol:IEEE802.11N-24G
                    Mode:Master
                    Channel:1
                    Encryption key:on
                    Bit Rates:300 Mb/s
                    Extra: Rates (Mb/s): 1 2 5.5 6 11 9 12 18 24 36 48 54 
                    Quality=65/100  Signal level=-53 dBm  Noise level=-102 dBm
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : TKIP CCMP
                        Authentication Suites (1) : PSK
                    Extra: Last beacon: 77ms ago
          Cell 02 - Address: 06:DE:7F:04:62:5A
                    ESSID:"FreeWifi"
                    Protocol:IEEE802.11N-24G
                    Mode:Master
                    Channel:1
                    Encryption key:off
                    Bit Rates:300 Mb/s
                    Extra: Rates (Mb/s): 1 2 5.5 6 11 9 12 18 24 36 48 54 
                    Quality=88/100  Signal level=-53 dBm  Noise level=-114 dBm
                    Extra: Last beacon: 138ms ago
          Cell 03 - Address: 06:DE:7F:04:62:59
                    ESSID:"<hidden>"
                    Protocol:IEEE802.11N-24G
                    Mode:Master
                    Channel:1
                    Encryption key:on
                    Bit Rates:300 Mb/s
                    Extra: Rates (Mb/s): 1 2 5.5 6 11 9 12 18 24 36 48 54 
                    Quality=88/100  Signal level=-53 dBm  Noise level=-114 dBm
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    Extra: Last beacon: 138ms ago
          Cell 04 - Address: 06:DE:7F:04:62:5B
                    ESSID:"<hidden>"
                    Protocol:IEEE802.11N-24G
                    Mode:Master
                    Channel:1
                    Encryption key:on
                    Bit Rates:300 Mb/s
                    Extra: Rates (Mb/s): 1 2 5.5 6 11 9 12 18 24 36 48 54 
                    Quality=62/100  Signal level=-54 dBm  Noise level=-101 dBm
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    Extra: Last beacon: 76ms ago

[root@localhost ~]# nm-tool

NetworkManager Tool

State: connected

- Device: eth0  [Auto eth0] ----------------------------------------------------
  Type:              Wired
  Driver:            r8169
  State:             connected
  Default:           yes
  HW Address:        40:61:86:11:69:AC

  Capabilities:
    Carrier Detect:  yes
    Speed:           100 Mb/s

  Wired Properties
    Carrier:         on

  IPv4 Settings:
    Address:         192.168.0.1
    Prefix:          24 (255.255.255.0)
    Gateway:         192.168.0.254

    DNS:             212.27.40.241
    DNS:             212.27.40.240


- Device: wlan0 ----------------------------------------------------------------
  Type:              802.11 WiFi
  Driver:            rtl819xSE
  State:             disconnected
  Default:           no
  HW Address:        00:25:D3:1E:F3:06

  Capabilities:

  Wireless Properties
    WEP Encryption:  yes
    WPA Encryption:  yes
    WPA2 Encryption: yes

  Wireless Access Points 
    FreeWifi:        Infra, 06:DE:7F:04:62:5A, Freq 2412 MHz, Rate 44 Mb/s, Strength 88
    freeFox:         Infra, 06:DE:7F:04:62:58, Freq 2412 MHz, Rate 44 Mb/s, Strength 65 WPA


[root@localhost ~]#

fox765 · 7 juin 2010

Ok je repars, mais n'a pas été trouvé selon ce que je vois.

[liveuser@localhost ~]$ su -
[root@localhost ~]# insmod /lib/modules/`uname -r`/kernel/drivers/net/wireless/r8192se_pci.ko
[root@localhost ~]# tail -f /var/log/messages
Jun  7 17:27:34 localhost NetworkManager[1342]: <info> (wlan0): device state change: 1 -> 2 (reason 2)
Jun  7 17:27:34 localhost NetworkManager[1342]: <info> (wlan0): bringing up device.
Jun  7 17:27:34 localhost kernel: rtl819xSE 0000:05:00.0: firmware: requesting RTL8192SE/rtl8192sfw.bin
Jun  7 17:27:34 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:27:34 localhost kernel: ===>rtllib_start_scan()
Jun  7 17:27:34 localhost NetworkManager[1342]: <info> (wlan0): preparing device.
Jun  7 17:27:34 localhost NetworkManager[1342]: <info> (wlan0): deactivating device (reason: 2).
Jun  7 17:27:34 localhost kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jun  7 17:27:34 localhost NetworkManager[1342]: <info> (wlan0): supplicant interface state:  starting -> ready
Jun  7 17:27:34 localhost NetworkManager[1342]: <info> (wlan0): device state change: 2 -> 3 (reason 42)
Jun  7 17:27:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:28:25 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:29:05 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:29:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:30:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:31:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:32:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:33:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:34:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:35:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:36:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
^C
[root@localhost ~]# tail -f /var/log/messages
Jun  7 17:29:05 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:29:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:30:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:31:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:32:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:33:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:34:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:35:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:36:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:37:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
^C
[root@localhost ~]# tail -f /var/log/messages
Jun  7 17:29:05 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:29:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:30:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:31:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:32:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:33:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:34:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:35:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:36:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:37:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Jun  7 17:38:55 localhost kernel: rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
^C
[root@localhost ~]# modinfo r8192se_pci
ERROR: modinfo: could not find module r8192se_pci
[root@localhost ~]#

fox765 · 7 juin 2010

Merci pour tes encouragements balustre.

J'en suis à:
# insmod /lib/modules`uname -r`/kernel/drivers/net/wireless/r8192se_pci.ko
sur le terminal qui ne m'a pas redonné la main. Il est resté sur "yum:Erased kernel"

Je te fais le retour, ce sera + explicite.

[liveuser@localhost ~]$ su -
[root@localhost ~]# cp /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/r8192se_pci.ko /lib/modules/`uname -r`/kernel/drivers/net/wireless
[root@localhost ~]# insmod /lib/modules`uname -r`/kernel/drivers/net/wireless/r8192se_pci.ko
insmod: can't read '/lib/modules2.6.33.3-85.fc13.i686/kernel/drivers/net/wireless/r8192se_pci.ko': No such file or directory
[root@localhost ~]# tail -f /var/log/messages
Jun  7 15:47:22 localhost avahi-daemon[1357]: New relevant interface eth0.IPv4 for mDNS.
Jun  7 15:47:22 localhost avahi-daemon[1357]: Registering new address record for 192.168.0.1 on eth0.IPv4.
Jun  7 15:47:23 localhost NetworkManager[1342]: <info> (eth0): device state change: 7 -> 8 (reason 0)
Jun  7 15:47:23 localhost avahi-daemon[1357]: Registering new address record for fe80::4261:86ff:fe11:69ac on eth0.*.
Jun  7 15:47:23 localhost NetworkManager[1342]: <info> Policy set 'Auto eth0' (eth0) as default for IPv4 routing and DNS.
Jun  7 15:47:23 localhost NetworkManager[1342]: <info> Activation (eth0) successful, device activated.
Jun  7 15:47:23 localhost NetworkManager[1342]: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) complete.
Jun  7 15:51:58 localhost yum: Erased: kmod-staging
Jun  7 15:51:59 localhost yum: Erased: kmod-staging-2.6.33.5-112.fc13.i686
Jun  7 15:52:40 localhost yum: Erased: kernel

Ca n'avance plus !

fox765 · 7 juin 2010

bioinfornatics wrote:fox765 tu es de quelle ville?
beaucoup de faute très bête, tu ne lis pas les messages du terminal?
je te conseil quelque soit la ville d'aller a une linux install party pour avoir quelques explication de vive voix. car tugalère sur des choses qui ne devrait pas avoir lieu.
Ma copine qui pige rien au pc n'a pas eu ce genre de mésaventure sans dout car je lui est expliqué une fois comment ça marché, ça prend même pas 1heure

Bonjour

Eh non,je ne suis pas très doué pour décrypter le messages du terminal en english.

Pour ton information, je suis basé à Rouen / seine Maritime

A ma connaissance je ne connais pas ce genre de réunion.

Conclusion, je m'en vais retourner sous mon Windows avec qqfois qq incursions sous Ubuntu qui me semble moins coriace que Fedora pour ces problèmes d'installation.

amicalement

fox765 · 7 juin 2010

ca n'a pas été jusqu'au bout !

[liveuser@localhost ~]$ su -
[root@localhost ~]# yum remove kernel-2.6.33.5-112*
Loaded plugins: presto, refresh-packagekit
Setting up Remove Process
Resolving Dependencies
--> Running transaction check
---> Package kernel.i686 0:2.6.33.5-112.fc13 set to be erased
--> Processing Dependency: kernel-uname-r = 2.6.33.5-112.fc13.i686 for package: kmod-staging-2.6.33.5-112.fc13.i686-2.6.33.2-2.fc13.5.i686
--> Running transaction check
---> Package kmod-staging-2.6.33.5-112.fc13.i686.i686 0:2.6.33.2-2.fc13.5 set to be erased
--> Processing Dependency: kmod-staging-2.6.33.5-112.fc13.i686 >= 2.6.33.2-2.fc13.5 for package: kmod-staging-2.6.33.2-2.fc13.5.i686
--> Running transaction check
---> Package kmod-staging.i686 0:2.6.33.2-2.fc13.5 set to be erased
--> Finished Dependency Resolution

Dependencies Resolved

================================================================================
 Package                   Arch Version           Repository               Size
================================================================================
Removing:
 kernel                    i686 2.6.33.5-112.fc13 @updates                 82 M
Removing for dependencies:
 kmod-staging              i686 2.6.33.2-2.fc13.5 @rpmfusion-free-updates 0.0  
 kmod-staging-2.6.33.5-112.fc13.i686
                           i686 2.6.33.2-2.fc13.5 @rpmfusion-free-updates 3.0 M

Transaction Summary
================================================================================
Remove        3 Package(s)
Reinstall     0 Package(s)
Downgrade     0 Package(s)

Is this ok [y/N]: y
Downloading Packages:
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
  Erasing        : kmod-staging-2.6.33.2-2.fc13.5.i686                      1/3 
  Erasing        : kmod-staging-2.6.33.5-112.fc13.i686-2.6.33.2-2.fc13.5.   2/3 
  Erasing        : kernel-2.6.33.5-112.fc13.i686                            3/3 

Removed:
  kernel.i686 0:2.6.33.5-112.fc13                                               

Dependency Removed:
  kmod-staging.i686 0:2.6.33.2-2.fc13.5                                         
  kmod-staging-2.6.33.5-112.fc13.i686.i686 0:2.6.33.2-2.fc13.5                  

Complete!
[root@localhost ~]# cp /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/r8192se_pci.ko /lib/modules/`uname -r`/kernel/drivers/net/
[root@localhost ~]# modprobe r8192se_pci
FATAL: Module r8192se_pci not found.
[root@localhost ~]# lsmod | grep r8192
[root@localhost ~]# lsmod | grep r8192

1) ATTENTION !
Fais le plus rapidement possible un (surtout ne pas redémarrer avant de l'avoir fait):

Entre deux je m'étais mis sur veille.alors que d'hab quand je dois m'éloigner du PC, j'éteins et redémarre.

fox765 · 7 juin 2010

(attention, il ne faut pas mettre à jour kernel)

C'est où je me suis emmêlé les pédales et c'est pourquoi j'ai répondu Non à la question posée.
Donc je remets ça.

[liveuser@localhost ~]$ su -
[root@localhost ~]# yum install kernel-headers-2.6.33.3-85.fc13.i686 kernel-devel-2.6.33.3-85.fc13.i686 gcc gcc-c++ glibc-devel glibc-headers
Loaded plugins: presto, refresh-packagekit
fedora/metalink                                          |  28 kB     00:00     
fedora                                                   | 4.3 kB     00:00     
fedora/primary_db                                        |  10 MB     00:25     
rpmfusion-free                                           | 2.8 kB     00:00     
rpmfusion-free/primary_db                                | 304 kB     00:00     
rpmfusion-free-updates                                   | 2.8 kB     00:00     
rpmfusion-free-updates/primary_db                        |  50 kB     00:00     
rpmfusion-nonfree                                        | 2.8 kB     00:00     
rpmfusion-nonfree/primary_db                             |  97 kB     00:00     
rpmfusion-nonfree-updates                                | 2.8 kB     00:00     
rpmfusion-nonfree-updates/primary_db                     | 6.5 kB     00:00     
updates/metalink                                         |  25 kB     00:00     
updates                                                  | 4.5 kB     00:00     
updates/primary_db                                       | 1.4 MB     00:03     
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package gcc.i686 0:4.4.4-2.fc13 set to be updated
---> Package gcc-c++.i686 0:4.4.4-2.fc13 set to be updated
---> Package glibc-devel.i686 0:2.12-1 set to be updated
---> Package glibc-headers.i686 0:2.12-1 set to be updated
---> Package kernel-devel.i686 0:2.6.33.3-85.fc13 set to be installed
---> Package kernel-headers.i686 0:2.6.33.3-85.fc13 set to be updated
--> Finished Dependency Resolution

Dependencies Resolved

================================================================================
 Package               Arch        Version                  Repository     Size
================================================================================
Installing:
 gcc                   i686        4.4.4-2.fc13             fedora        8.1 M
 gcc-c++               i686        4.4.4-2.fc13             fedora        4.3 M
 glibc-devel           i686        2.12-1                   fedora        959 k
 glibc-headers         i686        2.12-1                   fedora        596 k
 kernel-devel          i686        2.6.33.3-85.fc13         fedora        6.3 M
 kernel-headers        i686        2.6.33.3-85.fc13         fedora        760 k

Transaction Summary
================================================================================
Install       6 Package(s)
Upgrade       0 Package(s)

Total download size: 21 M
Installed size: 52 M
Is this ok [y/N]: y
Downloading Packages:
Setting up and reading Presto delta metadata
fedora/prestodelta                                       |  414 B     00:00     
Processing delta metadata
Package(s) data still to download: 21 M
(1/6): gcc-4.4.4-2.fc13.i686.rpm                         | 8.1 MB     00:19     
(2/6): gcc-c++-4.4.4-2.fc13.i686.rpm                     | 4.3 MB     00:10     
(3/6): glibc-devel-2.12-1.i686.rpm                       | 959 kB     00:02     
(4/6): glibc-headers-2.12-1.i686.rpm                     | 596 kB     00:01     
(5/6): kernel-devel-2.6.33.3-85.fc13.i686.rpm            | 6.3 MB     00:15     
(6/6): kernel-headers-2.6.33.3-85.fc13.i686.rpm          | 760 kB     00:01     
--------------------------------------------------------------------------------
Total                                           412 kB/s |  21 MB     00:52     
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
  Installing     : kernel-headers-2.6.33.3-85.fc13.i686                     1/6 
  Installing     : glibc-headers-2.12-1.i686                                2/6 
  Installing     : glibc-devel-2.12-1.i686                                  3/6 
  Installing     : kernel-devel-2.6.33.3-85.fc13.i686                       4/6 
  Installing     : gcc-4.4.4-2.fc13.i686                                    5/6 
  Installing     : gcc-c++-4.4.4-2.fc13.i686                                6/6 

Installed:
  gcc.i686 0:4.4.4-2.fc13               gcc-c++.i686 0:4.4.4-2.fc13            
  glibc-devel.i686 0:2.12-1             glibc-headers.i686 0:2.12-1            
  kernel-devel.i686 0:2.6.33.3-85.fc13  kernel-headers.i686 0:2.6.33.3-85.fc13 

Complete!
[root@localhost ~]# cd /usr/src/rtl8192se_linux_2.6.0015.0127.2010
[root@localhost rtl8192se_linux_2.6.0015.0127.2010]# make
make[1]: Entering directory `/usr/src/kernels/2.6.33.3-85.fc13.i686'
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_core.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_regd.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_rfkill.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_eeprom.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_wx.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_cam.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_pm.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_ps.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_dm.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_debug.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_ethtool.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_dev.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_Efuse.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_phy.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_firmware.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_rtl6052.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_hwimg.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_led.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_mp.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_scan.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/rtllib_rx.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/rtllib_softmac.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/rtllib_tx.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/rtllib_wx.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/rtllib_module.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/rtllib_softmac_wx.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/rtl819x_HTProc.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/rtl819x_TSProc.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/rtl819x_BAProc.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/dot11d.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/rtllib_crypt.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/rtllib_crypt_tkip.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/rtllib_crypt_ccmp.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/rtllib_crypt_wep.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/wapi.o
  CC [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/../../rtllib/wapi_interface.o
  LD [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/r8192se_pci.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/r8192se_pci.mod.o
  LD [M]  /usr/src/rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/r8192se_pci.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.33.3-85.fc13.i686'
[root@localhost rtl8192se_linux_2.6.0015.0127.2010]# find / -name r8192se_pci -print
[root@localhost rtl8192se_linux_2.6.0015.0127.2010]#

Et si ca fonctionne
# find / -name r8192se_pci -print

Comme ça a fonctionné, j'ai été jusqu'au bout comme tu peux le voir

bon ou pas bon ???

fox765 · 7 juin 2010

balustre wrote:Et si ca fonctionne
# find / -name r8192se_pci -print

ca n'a pas fonctionné dans la dernière cde

[liveuser@localhost ~]$ su -
[root@localhost ~]# yum remove kernel.2.6.33.5-112.fc13 kernel-devel kernel-headers
Loaded plugins: presto, refresh-packagekit
Setting up Remove Process
No Match for argument: kernel.2.6.33.5-112.fc13
fedora/metalink                                          |  29 kB     00:00     
fedora                                                   | 4.3 kB     00:00     
fedora/primary_db                                        |  10 MB     00:25     
rpmfusion-free                                           | 2.8 kB     00:00     
rpmfusion-free/primary_db                                | 304 kB     00:00     
rpmfusion-free-updates                                   | 2.8 kB     00:00     
rpmfusion-free-updates/primary_db                        |  50 kB     00:00     
rpmfusion-nonfree                                        | 2.8 kB     00:00     
rpmfusion-nonfree/primary_db                             |  97 kB     00:00     
rpmfusion-nonfree-updates                                | 2.8 kB     00:00     
rpmfusion-nonfree-updates/primary_db                     | 6.5 kB     00:00     
updates/metalink                                         |  25 kB     00:00     
updates                                                  | 4.5 kB     00:00     
updates/primary_db                                       | 1.4 MB     00:03     
Resolving Dependencies
--> Running transaction check
---> Package kernel-devel.i686 0:2.6.33.5-112.fc13 set to be erased
---> Package kernel-headers.i686 0:2.6.33.5-112.fc13 set to be erased
--> Processing Dependency: kernel-headers for package: glibc-headers-2.12-1.i686
--> Processing Dependency: kernel-headers >= 2.2.1 for package: glibc-headers-2.12-1.i686
--> Running transaction check
---> Package glibc-headers.i686 0:2.12-1 set to be erased
--> Processing Dependency: glibc-headers for package: glibc-devel-2.12-1.i686
--> Processing Dependency: glibc-headers = 2.12-1 for package: glibc-devel-2.12-1.i686
--> Running transaction check
---> Package glibc-devel.i686 0:2.12-1 set to be erased
--> Processing Dependency: glibc-devel >= 2.2.90-12 for package: gcc-4.4.4-2.fc13.i686
--> Running transaction check
---> Package gcc.i686 0:4.4.4-2.fc13 set to be erased
--> Processing Dependency: gcc = 4.4.4-2.fc13 for package: gcc-c++-4.4.4-2.fc13.i686
--> Running transaction check
---> Package gcc-c++.i686 0:4.4.4-2.fc13 set to be erased
--> Finished Dependency Resolution

Dependencies Resolved

================================================================================
 Package              Arch       Version                   Repository      Size
================================================================================
Removing:
 kernel-devel         i686       2.6.33.5-112.fc13         @updates        22 M
 kernel-headers       i686       2.6.33.5-112.fc13         @updates       2.3 M
Removing for dependencies:
 gcc                  i686       4.4.4-2.fc13              @fedora         15 M
 gcc-c++              i686       4.4.4-2.fc13              @fedora         10 M
 glibc-devel          i686       2.12-1                    @fedora        953 k
 glibc-headers        i686       2.12-1                    @fedora        2.1 M

Transaction Summary
================================================================================
Remove        6 Package(s)
Reinstall     0 Package(s)
Downgrade     0 Package(s)

Is this ok [y/N]: y
Downloading Packages:
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
  Erasing        : kernel-devel-2.6.33.5-112.fc13.i686                      1/6 
  Erasing        : gcc-c++-4.4.4-2.fc13.i686                                2/6 
  Erasing        : gcc-4.4.4-2.fc13.i686                                    3/6 
  Erasing        : glibc-devel-2.12-1.i686                                  4/6 
  Erasing        : glibc-headers-2.12-1.i686                                5/6 
  Erasing        : kernel-headers-2.6.33.5-112.fc13.i686                    6/6 

Removed:
  kernel-devel.i686 0:2.6.33.5-112.fc13 kernel-headers.i686 0:2.6.33.5-112.fc13

Dependency Removed:
  gcc.i686 0:4.4.4-2.fc13               gcc-c++.i686 0:4.4.4-2.fc13            
  glibc-devel.i686 0:2.12-1             glibc-headers.i686 0:2.12-1            

Complete!
[root@localhost ~]# yum install kernel-headers-2.6.33.3-85.fc13.i686 kernel-devel-2.6.33.3-85.fc13.i686 gcc gcc-c++ glibc-devel glibc-headers 
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package gcc.i686 0:4.4.4-2.fc13 set to be updated
---> Package gcc-c++.i686 0:4.4.4-2.fc13 set to be updated
---> Package glibc-devel.i686 0:2.12-1 set to be updated
---> Package glibc-headers.i686 0:2.12-1 set to be updated
---> Package kernel-devel.i686 0:2.6.33.3-85.fc13 set to be installed
---> Package kernel-headers.i686 0:2.6.33.3-85.fc13 set to be updated
--> Finished Dependency Resolution

Dependencies Resolved

================================================================================
 Package               Arch        Version                  Repository     Size
================================================================================
Installing:
 gcc                   i686        4.4.4-2.fc13             fedora        8.1 M
 gcc-c++               i686        4.4.4-2.fc13             fedora        4.3 M
 glibc-devel           i686        2.12-1                   fedora        959 k
 glibc-headers         i686        2.12-1                   fedora        596 k
 kernel-devel          i686        2.6.33.3-85.fc13         fedora        6.3 M
 kernel-headers        i686        2.6.33.3-85.fc13         fedora        760 k

Transaction Summary
================================================================================
Install       6 Package(s)
Upgrade       0 Package(s)

Total download size: 21 M
Installed size: 52 M
Is this ok [y/N]: N
Exiting on user Command
Complete!
[root@localhost ~]# cd /usr/src/rtl8192se_linux_2.6.0015.0127.2010
[root@localhost rtl8192se_linux_2.6.0015.0127.2010]# 
[root@localhost rtl8192se_linux_2.6.0015.0127.2010]# make
make: *** /lib/modules/2.6.33.3-85.fc13.i686/build: No such file or directory.  Stop.
make: *** [all] Error 2
[root@localhost rtl8192se_linux_2.6.0015.0127.2010]#

fox765 · 6 juin 2010

a tous deux

Vous voudrez bien m'excuser; je suis obligé de m'absenter pour un moment. Merci @+

fox765 · 6 juin 2010

[liveuser@localhost ~]$ su -
[root@localhost ~]# uname -r
2.6.33.3-85.fc13.i686
[root@localhost ~]#

fox765 · 6 juin 2010

balustre wrote:Que donne
# yum list kernel ?

[liveuser@localhost ~]$ su -
[root@localhost ~]# yum list kernel
Loaded plugins: presto, refresh-packagekit
fedora/metalink                                          |  28 kB     00:00     
fedora                                                   | 4.3 kB     00:00     
fedora/primary_db                                        |  10 MB     00:22     
rpmfusion-free                                           | 2.8 kB     00:00     
rpmfusion-free/primary_db                                | 304 kB     00:00     
rpmfusion-free-updates                                   | 2.8 kB     00:00     
rpmfusion-free-updates/primary_db                        |  50 kB     00:00     
rpmfusion-nonfree                                        | 2.8 kB     00:00     
rpmfusion-nonfree/primary_db                             |  97 kB     00:00     
rpmfusion-nonfree-updates                                | 2.8 kB     00:00     
rpmfusion-nonfree-updates/primary_db                     | 6.5 kB     00:00     
updates/metalink                                         |  25 kB     00:00     
updates                                                  | 4.5 kB     00:00     
updates/primary_db                                       | 1.4 MB     00:03     
Installed Packages
kernel.i686               2.6.33.3-85.fc13                 @released/$releasever
kernel.i686               2.6.33.5-112.fc13                @updates             
[root@localhost ~]#

fox765 · 6 juin 2010

balustre wrote:Nouvelle tentative 🙂 🙂
/

J'ai réussi......

1er retour:

[liveuser@localhost ~]$ su -
[root@localhost ~]# cd cd /usr/src/rtl8192se_linux_2.6.0015.0127.2010
-bash: cd: cd: No such file or directory
[root@localhost ~]# make -C /lib/modules/2.6.33.5-112.fc13.i686/build
make: Entering directory `/usr/src/kernels/2.6.33.5-112.fc13.i686'
  CHK     include/linux/version.h
  CHK     include/generated/utsrelease.h
make[1]: *** No rule to make target `missing-syscalls'.  Stop.
make: *** [prepare0] Error 2
make: Leaving directory `/usr/src/kernels/2.6.33.5-112.fc13.i686'
[root@localhost ~]#

2ème retour:

[liveuser@localhost ~]$ su -
[root@localhost ~]# ls /lib/modules/2.6.33.5-112.fc13.i686
build                modules.dep.bin      modules.seriomap
extra                modules.drm          modules.symbols
kernel               modules.ieee1394map  modules.symbols.bin
modules.alias        modules.inputmap     modules.usbmap
modules.alias.bin    modules.isapnpmap    source
modules.block        modules.modesetting  updates
modules.builtin      modules.networking   vdso
modules.builtin.bin  modules.ofmap        weak-updates
modules.ccwmap       modules.order
modules.dep          modules.pcimap
[root@localhost ~]#

Qu'en penses-tu ?

fox765 · 6 juin 2010

On va essayer:

Mais selon moi, c'est pas good

[liveuser@localhost ~]$ su -
[root@localhost ~]# cd cd /usr/src/rtl8192se_linux_2.6.0015.0127.2010
-bash: cd: cd: No such file or directory
[root@localhost ~]# make -C /lib/modules/2.6.33.5-112.i686/build
make: *** /lib/modules/2.6.33.5-112.i686/build: No such file or directory.  Stop.
[root@localhost ~]#

Merci pour l'autre info, c'était pour reprendre une partie de post

fox765 · 6 juin 2010

balestre, un petit service entre deux....comment fais-tu pour inclure dans tes réponses:

fox765 a écrit:

J'ai refait l'install etc..

J'ai cherché sans succès à mentionner avec référence au répondeur.

Merci pour l'info.

fox765 · 6 juin 2010

[liveuser@localhost ~]$ su -
[root@localhost ~]# find / -name r8192se_pci -print
[root@localhost ~]#

????????

fox765 · 6 juin 2010

Après une petite pause, me voilà revenu

je refais donc le processus; l'archive s'est bien chargée, mais erreur au retour de "make"

[liveuser@localhost ~]$ su -
[root@localhost ~]# cd /usr/src
[root@localhost src]# tar xvzf /home/liveuser/Desktop/rtl8192se_linux_2.6.0015.0127.2010.tar.gz
rtl8192se_linux_2.6.0015.0127.2010/
rtl8192se_linux_2.6.0015.0127.2010/firmware/
rtl8192se_linux_2.6.0015.0127.2010/firmware/RTL8192SE/
rtl8192se_linux_2.6.0015.0127.2010/firmware/RTL8192SE/Realtek-Firmware-License.txt
rtl8192se_linux_2.6.0015.0127.2010/firmware/RTL8192SE/rtl8192sfw.bin
rtl8192se_linux_2.6.0015.0127.2010/firmware/RTL8192SE/rtl8192sfw492.bin
rtl8192se_linux_2.6.0015.0127.2010/firmware/RTL8192SE/rtl8192sfw74.bin
rtl8192se_linux_2.6.0015.0127.2010/HAL/
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/Makefile
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/Makefile
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_def.h
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_dev.c
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_dev.h
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_Efuse.c
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_Efuse.h
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_firmware.c
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_firmware.h
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_hw.h
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_hwimg.c
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_hwimg.h
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_hwimg492.c
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_hwimg492.h
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_hwimg74.c
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_hwimg74.h
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_led.c
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_led.h
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_mp.c
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_mp.h
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_phy.c
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_phy.h
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_phyreg.h
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_rtl6052.c
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_rtl6052.h
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_scan.c
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl8192s/r8192S_scan.h
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_cam.c
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_cam.h
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_core.c
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_core.h
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_debug.c
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_debug.h
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_dm.c
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_dm.h
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_eeprom.c
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_eeprom.h
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_endianfree.h
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_ethtool.c
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_mesh.c
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_mesh.h
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_pm.c
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_pm.h
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_ps.c
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_ps.h
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_regd.c
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_regd.h
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_rfkill.c
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_rfkill.h
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_wx.c
rtl8192se_linux_2.6.0015.0127.2010/HAL/rtl8192/rtl_wx.h
rtl8192se_linux_2.6.0015.0127.2010/ifcfg-wlan0
rtl8192se_linux_2.6.0015.0127.2010/Makefile
rtl8192se_linux_2.6.0015.0127.2010/RadioPower.sh
rtl8192se_linux_2.6.0015.0127.2010/readme.txt
rtl8192se_linux_2.6.0015.0127.2010/release_note
rtl8192se_linux_2.6.0015.0127.2010/rtllib/
rtl8192se_linux_2.6.0015.0127.2010/rtllib/aes.c
rtl8192se_linux_2.6.0015.0127.2010/rtllib/api.c
rtl8192se_linux_2.6.0015.0127.2010/rtllib/arc4.c
rtl8192se_linux_2.6.0015.0127.2010/rtllib/autoload.c
rtl8192se_linux_2.6.0015.0127.2010/rtllib/cipher.c
rtl8192se_linux_2.6.0015.0127.2010/rtllib/compress.c
rtl8192se_linux_2.6.0015.0127.2010/rtllib/crypto_compat.h
rtl8192se_linux_2.6.0015.0127.2010/rtllib/digest.c
rtl8192se_linux_2.6.0015.0127.2010/rtllib/dot11d.c
rtl8192se_linux_2.6.0015.0127.2010/rtllib/dot11d.h
rtl8192se_linux_2.6.0015.0127.2010/rtllib/EndianFree.h
rtl8192se_linux_2.6.0015.0127.2010/rtllib/internal.h
rtl8192se_linux_2.6.0015.0127.2010/rtllib/kmap_types.h
rtl8192se_linux_2.6.0015.0127.2010/rtllib/license
rtl8192se_linux_2.6.0015.0127.2010/rtllib/Makefile
rtl8192se_linux_2.6.0015.0127.2010/rtllib/michael_mic.c
rtl8192se_linux_2.6.0015.0127.2010/rtllib/proc.c
rtl8192se_linux_2.6.0015.0127.2010/rtllib/readme
rtl8192se_linux_2.6.0015.0127.2010/rtllib/rtl819x_BA.h
rtl8192se_linux_2.6.0015.0127.2010/rtllib/rtl819x_BAProc.c
rtl8192se_linux_2.6.0015.0127.2010/rtllib/rtl819x_HT.h
rtl8192se_linux_2.6.0015.0127.2010/rtllib/rtl819x_HTProc.c
rtl8192se_linux_2.6.0015.0127.2010/rtllib/rtl819x_Qos.h
rtl8192se_linux_2.6.0015.0127.2010/rtllib/rtl819x_TS.h
rtl8192se_linux_2.6.0015.0127.2010/rtllib/rtl819x_TSProc.c
rtl8192se_linux_2.6.0015.0127.2010/rtllib/rtllib.h
rtl8192se_linux_2.6.0015.0127.2010/rtllib/rtllib_crypt.c
rtl8192se_linux_2.6.0015.0127.2010/rtllib/rtllib_crypt.h
rtl8192se_linux_2.6.0015.0127.2010/rtllib/rtllib_crypt_ccmp.c
rtl8192se_linux_2.6.0015.0127.2010/rtllib/rtllib_crypt_tkip.c
rtl8192se_linux_2.6.0015.0127.2010/rtllib/rtllib_crypt_wep.c
rtl8192se_linux_2.6.0015.0127.2010/rtllib/rtllib_module.c
rtl8192se_linux_2.6.0015.0127.2010/rtllib/rtllib_rx.c
rtl8192se_linux_2.6.0015.0127.2010/rtllib/rtllib_softmac.c
rtl8192se_linux_2.6.0015.0127.2010/rtllib/rtllib_softmac_wx.c
rtl8192se_linux_2.6.0015.0127.2010/rtllib/rtllib_tx.c
rtl8192se_linux_2.6.0015.0127.2010/rtllib/rtllib_wx.c
rtl8192se_linux_2.6.0015.0127.2010/rtllib/rtl_crypto.h
rtl8192se_linux_2.6.0015.0127.2010/rtllib/scatterwalk.c
rtl8192se_linux_2.6.0015.0127.2010/rtllib/scatterwalk.h
rtl8192se_linux_2.6.0015.0127.2010/rtllib/wapi.c
rtl8192se_linux_2.6.0015.0127.2010/rtllib/wapi.h
rtl8192se_linux_2.6.0015.0127.2010/rtllib/wapi_interface.c
rtl8192se_linux_2.6.0015.0127.2010/rtllib/wapi_interface.h
rtl8192se_linux_2.6.0015.0127.2010/runwpa
rtl8192se_linux_2.6.0015.0127.2010/wireless-rtl-ac-dc-power.sh
rtl8192se_linux_2.6.0015.0127.2010/wlan0dhcp
rtl8192se_linux_2.6.0015.0127.2010/wlan0down
rtl8192se_linux_2.6.0015.0127.2010/wlan0up
rtl8192se_linux_2.6.0015.0127.2010/wpa1.conf
rtl8192se_linux_2.6.0015.0127.2010/wpa_supplicant-0.6.9.tar.gz
[root@localhost src]# cd rtl8192se_linux_2.6.0015.0127.2010

[root@localhost rtl8192se_linux_2.6.0015.0127.2010]# 
[root@localhost rtl8192se_linux_2.6.0015.0127.2010]# cp -rf firmware/RTL8192SE /lib/firmware
[root@localhost rtl8192se_linux_2.6.0015.0127.2010]# 
[root@localhost rtl8192se_linux_2.6.0015.0127.2010]# make
make: *** /lib/modules/2.6.33.3-85.fc13.i686/build: No such file or directory.  Stop.
make: *** [all] Error 2
[root@localhost rtl8192se_linux_2.6.0015.0127.2010]#

fox765 · 6 juin 2010

C'est ce que je me proposais de faire en découvrant l'emplacement dans "propriétés"

Mais malheureusement c'est pas encore cela !

[liveuser@localhost ~]$ su -
[root@localhost ~]# cd /usr/src
[root@localhost src]# tar xvzf /home/liveuser/Desktop/rtl8192se_linux_2.6.0015.0123.2010.tar.gz
tar: /home/liveuser/Desktop/rtl8192se_linux_2.6.0015.0123.2010.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Exiting with failure status due to previous errors
[root@localhost src]#

fox765 · 6 juin 2010

fox765 · 6 juin 2010

Reprends donc dès le début en changeant cette ligne 😉

OK,merci de ta patience, car les libellés en anglais ne sont mon fort, il me faut souvent décrypter avec l'aide de google.
Alors là, j'ai compris que la cde n'a pas abouti; je ne vais pas au-delà.

[liveuser@localhost ~]$ su -
[root@localhost ~]# cd /usr/src
[root@localhost src]# tar xzvf /liveuser/Bureau/rtl8192se_linux_2.6.0015.0127.2010.tar.gz
tar: /liveuser/Bureau/rtl8192se_linux_2.6.0015.0127.2010.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Exiting with failure status due to previous errors
[root@localhost src]#

Il sera dit qu'avec cette clé, il me sera impossible d'opérer sous wifi contrairement à celle sous Ubuntu.
C'est dommage car j'aimais bien la présentation sous fedora.

Alors, que fait-on ?? Abandon ou on persiste ??

fox765 · 6 juin 2010

Bonjour balustre

malheureusement je crois comprendre que le driver n'a pu être trouvé

[liveuser@localhost ~]$ su -
[root@localhost ~]# cd /usr/src
[root@localhost src]# tar xzvf /home/liveuser/Bureau/rtl8192se_linux_2.6.0015.0127.2010.tar.gz
tar: /home/liveuser/Bureau/rtl8192se_linux_2.6.0015.0127.2010.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Exiting with failure status due to previous errors
[root@localhost src]# cd rtl8192se_linux_2.6.0015.0127.2010
-bash: cd: rtl8192se_linux_2.6.0015.0127.2010: No such file or directory
[root@localhost src]# cp -rf firmware/RTL8192SE /lib/firmware
cp: cannot stat `firmware/RTL8192SE': No such file or directory
[root@localhost src]# make
make: *** No targets specified and no makefile found.  Stop.
[root@localhost src]# find / -name r8192se_pci -print
[root@localhost src]#

Pourquoi donc est-ce si compliqué d'ouvrir un pilote sous fedora ?