A
aenarion

  • 22 mai 2009
  • Inscrit 26 janv. 2006
  • 0 meilleure réponse
  • Petit nouveau
  • bonjour, j'ai une nvidia 6600GT j'avais installer XGL avec Compiz comme dab tout marchai bien avec les pilotes Kmod-nvidia mais depui quelque jour plus d'effet suite a plusieur mise a jours au départ le serveur x ne démarrai plus et par la suite apres d'autres mise a jour il démarre avec xgl mais plus d'effet alors que tout les plugins son cocher dans gsetconf. je ne voi pas trp c'est comme si compiz ne marchai plus.
    quelqu'un a eu le problème ?
  • oui ca me change la resolution c a dir ca passe a la resolution 1152 au lieu de passer au 1280 100Hz
  • Oui en fait j'ai essayer les 2 mais je l'ai retirer voyant que ca ne changai rien je n'avai tjs que le 60hz de dispo
  • bon alors je n'est tjs pas réussi mm apres avoir regler selon les specifications du constructeur et ca ne change rien que je mette le modline et "1280x960_60" "1280x960_100" je n'est tjs que le 60hz je n'y comprend plus rien.
    # Xorg configuration created by system-config-display

    Section "ServerLayout"
    Identifier "single head configuration"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection

    Section "Files"

    # Multiple FontPath entries are allowed (they are concatenated together)
    # By default, a font server independent of the X server is
    # used to render fonts.
    ModulePath "/usr/lib/xorg/modules/extensions/nvidia"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "unix/:7100"
    EndSection

    Section "Module"
    Load "dbe"
    Load "extmod"
    Load "fbdevhw"
    Load "record"
    Load "freetype"
    Load "type1"
    Load "glx"
    Load "dri"
    EndSection

    Section "ServerFlags"
    Option "AllowMouseOpenFail" "yes"
    EndSection

    Section "InputDevice"

    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"
    # To disable the XKEYBOARD extension, uncomment XkbDisable.
    # Option "XkbDisable"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc102"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"
    # Or if you just want both to be control, use:
    # Option "XkbOptions" "ctrl:nocaps"
    #
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "fr"
    Option "XkbVariant" "latin9"
    EndSection

    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "IMPS/2"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5"
    Option "Emulate3Buttons" "no"
    EndSection

    Section "Monitor"

    ### Comment all HorizSync and VertSync values to use DDC:
    ### Comment all HorizSync and VertSync values to use DDC:
    ### Comment all HorizSync and VertSync values to use DDC:
    ### Comment all HorizSync and VertSync values to use DDC:
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Iiyama A902MT, VisionMaster Pro 451"
    DisplaySize 360 290
    ### Comment all HorizSync and VertSync values to use DDC:
    HorizSync 30.0 - 115.0
    VertRefresh 50.0 - 180.0
    Modeline "1280x960@100" 219.94 1280 1312 2144 2176 960 976 992 1009
    Option "dpms"
    EndSection

    Section "Device"
    Identifier "Videocard0"
    Driver "nvidia"
    VendorName "Videocard vendor"
    BoardName "nVidia Corporation NV43 [GeForce 6600/GeForce 6600 GT]"
    EndSection

    Section "Screen"
    Identifier "Screen0"
    Device "Videocard0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 16
    Modes "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1280x960" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection

    Section "DRI"
    Group 0
    Mode 0666
    EndSection
  • tu a de la chance moi j'ai les bordures mais pas l'interieur et tout est blanc donc je ne voi plus rien a par les bordures j'ai une 6600GT agp
  • alors merci deja d'avoir répondu.
    j'ai tester un peut tout ca mais ca ne change pas grand chose en fait je suis tjs limiter a 60hz pour le 1280x960 quand je veut changer la résolution dans les preferences je n'ai que ce choix la.

    je vous joint le fichier xorg.conf
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc102"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"
    # Or if you just want both to be control, use:
    # Option "XkbOptions" "ctrl:nocaps"
    #
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "fr"
    Option "XkbVariant" "latin9"
    EndSection

    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "IMPS/2"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5"
    Option "Emulate3Buttons" "no"
    EndSection

    Section "Monitor"

    ### Comment all HorizSync and VertSync values to use DDC:
    ### Comment all HorizSync and VertSync values to use DDC:
    ### Comment all HorizSync and VertSync values to use DDC:
    ### Comment all HorizSync and VertSync values to use DDC:
    ### Comment all HorizSync and VertSync values to use DDC:
    ### Comment all HorizSync and VertSync values to use DDC:
    ### Comment all HorizSync and VertSync values to use DDC:
    ### Comment all HorizSync and VertSync values to use DDC:
    ### Comment all HorizSync and VertSync values to use DDC:
    ### Comment all HorizSync and VertSync values to use DDC:
    ### Comment all HorizSync and VertSync values to use DDC:
    ### Comment all HorizSync and VertSync values to use DDC:
    ### Comment all HorizSync and VertSync values to use DDC:
    ### Comment all HorizSync and VertSync values to use DDC:
    ### Comment all HorizSync and VertSync values to use DDC:
    ### Comment all HorizSync and VertSync values to use DDC:
    ### Comment all HorizSync and VertSync values to use DDC:
    ### Comment all HorizSync and VertSync values to use DDC:
    ### Comment all HorizSync and VertSync values to use DDC:
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Iiyama A902MT, VisionMaster Pro 451"
    DisplaySize 360 290
    ### Comment all HorizSync and VertSync values to use DDC:
    HorizSync 30.0 - 115.0
    VertRefresh 50.0 - 180.0
    ModeLine "1280x960" 172.8 1280 1336 1616 1728 960 962 974 1000
    Option "dpms"
    EndSection

    Section "Device"
    Identifier "Videocard0"
    Driver "nvidia"
    VendorName "Videocard vendor"
    BoardName "nVidia Corporation NV43 [GeForce 6600/GeForce 6600 GT]"
    EndSection

    Section "Screen"
    Identifier "Screen0"
    Device "Videocard0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 16
    Modes "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1280x960" "1152x864" "1024x768" "800x600"
    EndSubSection
    EndSection

    Section "DRI"
    Group 0
    Mode 0666
    EndSection
    alors parcontre si je rajoute "1280x960_100" par exemple ca n'apparai pas dans les choix
    voila ca fait plusieur jour que je suis dessus je commence a me tirer les cheveux lol.
  • bonjour j'ai un pbl pour changer mon rafraichissement en 100hz j'ai installer les pilote Nvidia de chez livna sur ma FC5 pas de problem mais je suis en résolution 1280*960 60hz donc un rafraichissement tres bas pour mon ecran 19" iiyama vision master pro 451 et ma carte 6600gt je voudrai le passer en 100hz comme sous windows mais rien y fait toutes les modif que je peut faire dans xorg.conf ne change rien du tout.

    que faire ?
  • bon apparemment apres plusieur recherche le premier probleme de plantage avec écran noir ca viendrai de la gestion ACPI
    y a t'il un patch pour la version 2.6.14-1.1656 du noyau parceque quand j'intergre un dsdt modifier expret pour mon posrtable ca me met un Kernel Panic au démarrage
  • Bonjour, je vient d?installer une Fedora 4 sur mon portable Amilo-A 7600 qui est équiper d?une carte ATI IGP 320M et d?un moniteur 15 pouces .
    Avec le noyau d?origine je n?avait plus d?affichage après le paramétrage du moniteur, il y avait un écran noir et tout de bloquer j?ai mi a jour le noyau en 2.6.14 et j?ai installer avec livna les nouveau pilote ATI et la je n?est plus d?écran noir mais une erreur au démarrage du serveur X

    Fatal server error
    no screens found

    donc je ne voi pas quoi changer dans le xorg.conf surement un truc a changer au niveau de l'écran mais je sais pas trop, si quelqu'un a une idée.
    # Or if you just want both to be control, use:
    # Option "XkbOptions" "ctrl:nocaps"
    #
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "fr-latin9"
    EndSection

    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "IMPS/2"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5"
    Option "Emulate3Buttons" "yes"
    EndSection
    E325: ATTENTION
    Section "Monitor"r d'échange nommé "/etc/X11/.xorg.conf.swp"
    Identifier "Monitor0"até: Thu Jan 26 15:57:24 2006
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSectionl
    proce
    Section "Device"
    Identifier "Videocard0"
    Driver "fglrx"
    (1) Un aVendorName "Videocard vendor"
    Si cBoardName "ATI Radeon Mobility U1"pas vous retrouver avec
    Option "VideoOverlay" "on"f
    EndSection
    ons.
    Section "Screen"continuez prudemment.
    Identifier "Screen0"
    (2) Une Device "Videocard0" ce fichier a planté.
    Monitor "Monitor0"
    " DefaultDepth 16
    SubSection "Display"ngements (voir ":help recovery").
    Viewport 0 0
    1/ Depth 16
    Modes "1024x768"
    EndSubSection
    EndSection

    /var/log/Xorg.0.log
    xauth: creating new authority file /root/.Xauthority
    xauth: creating new authority file /root/.Xauthority

    X Window System Version 6.8.2
    Release Date: 9 February 2005
    X Protocol Version 11, Revision 0, Release 6.8.2
    Build Operating System: Linux 2.6.9-22.ELsmp i686 [ELF]
    Current Operating System: Linux localhost.localdomain 2.6.14-1.1656_FCan 5 22:13:22 EST 2006 i686
    Build Date: 21 September 2005
    Build Host: hs20-bc1-6.build.redhat.com

    Before reporting problems, check http://wiki.X.Org
    to make sure that you have the latest version.
    Module Loader present
    OS Kernel: Linux version 2.6.14-1.1656_FC4 (bhcompile@tweety.build.redgcc version 4.0.2 20051125 (Red Hat 4.0.2-8)) #1 Thu Jan 5 22:13:22 ES
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 26 16:16:39 2006
    (==) Using config file: "/etc/X11/xorg.conf"

    (EE) No devices detected.

    Fatal server error:
    no screens found

    Please consult the The X.Org Foundation support
    at http://wiki.X.Org
    for help.
    Please also check the log file at "/var/log/Xorg.0.log" for additionalon.

    XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
    after 0 requests (0 known processed) with 0 events remaining.
    [root@localhost ~]# man /var/log/Xorg.0.log
    [root@localhost ~]# man /var/log//var/log/Xorg.0.log
    /var/log//var/log/Xorg.0.log: Aucun fichier ou répertoire de ce type
    Il n'y a pas de page de manuel pour /var/log//var/log/Xorg.0.log.
    [root@localhost ~]#
    [root@localhost ~]# man /etc/X11/xorg.conf
    [root@localhost ~]# vim /var/log/Xorg.0.log

    X Window System Version 6.8.2
    Release Date: 9 February 2005
    X Protocol Version 11, Revision 0, Release 6.8.2
    Build Operating System: Linux 2.6.9-22.ELsmp i686 [ELF]
    Current Operating System: Linux localhost.localdomain 2.6.14-1.1656_FC4 #1 Thu Jan 5 22:13:22 EST 2006 i686
    Build Date: 21 September 2005
    Build Host: hs20-bc1-6.build.redhat.com

    Before reporting problems, check http://wiki.X.Org
    to make sure that you have the latest version.
    Module Loader present
    OS Kernel: Linux version 2.6.14-1.1656_FC4 (bhcompile@tweety.build.redhat.com) (gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)) #1 Thu Jan 5 22:13:22 EST 2006
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 26 16:16:39 2006
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Default Layout"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Videocard0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (**) FontPath set to "unix/:7100"
    (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
    (==) ModulePath set to "/usr/X11R6/lib/modules"
    (WW) Open APM failed (/dev/apm_bios) (No such file or directory)
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.2
    X.Org Video Driver: 0.7
    X.Org XInput driver : 0.4
    X.Org Server Extension : 0.2
    X.Org Font Renderer : 0.4
    (II) Loader running on linux
    (II) LoadModule: "bitmap"
    (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
    (II) Module bitmap: vendor="X.Org Foundation"
    compiled for 6.8.2, module version = 1.0.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.4