- Modifié
0Lien

- 9 oct. 2012
- Inscrit 21 nov. 2009
- 0 meilleure réponse
- Petit nouveau
- Dans Votre bureau
- Dans Votre bureau
- Modifié
Voilà pour moi !
- Dock : Avant Windows Navigator (en mode unity-likepas taper, pas trop le choix entre un dock à droite ou à gauche étant donné qu'en bas c'est la barre de notification et en haut le panel !)
- Police : Ubuntu (se trouve partout)
- Thème Gnome Shell : Elementary par Half-Left sur DeviantArt
- GTK3 : Adwaita Improved par Half-Left sur DeviantArt (quelques modifications pour regagner un peu de place en vertical)
EDIT : Petite variante avec le dock "derrière" le panel
- Modifié
Bon je n'y comprends rien, j'ai retenté de l'installer. Cette fois ci l'extension marche. Pourtant, alt + tab a remarché uniquement lorsque j'ai désinstallé le paquet ! (désolé de polluer le topic)
(En passant, je n'arrivais plus non plus à changer de wallpaper, et là je peux de nouveau).
Du coup, je fais quoi avec le rapport ? :-? Parce que je ne peux pas remettre en cause le paquet et je ne sais pas d'où vient le bogue (que je n'ai plus). On peut "suspendre" le rapport ?- Modifié
https://bugzilla.redhat.com/show_bug.cgi?id=696522 c'est parti de ce premier rapport de bug par ABRT.Je dois en faire un concernant alternate tab exclusivement ?Je vais modifier le "component".- Modifié
Attention avec Alternate Tab, chez moi ça faisait planter Gnome Shell.- Modifié
Bonjour,
Il y a 2 paquets à installer pour jupiter sur les EeePC :
jupiter-0.0.49-0.1.noarch.rpm
jupiter-support-eee-0.0.12-0.noarch.rpm
As tu essayé de redémarrer ? J'avais quelques soucis comme ça avec Jupiter lorsque je ne redémarrais pas.- Bon, j'ai donc fais une réinstallation au propre. Rien n'a changé, toujours les problèmes au démarrage.
- Modifié
Bon déjà je vais sauvegarder sur un DD externe (qu'on me prête) pour éviter toute perte de données importantes.
Hier soir j'ai ouvert la fameuse trappe me permettant d'accéder au DD, il n'y avait aucune anomalie physique. Je l'ai enlevé et remis, mais ça n'a rien changé, toujours le message redondant au démarrage.
Je n'ai malheureusement pas d'autre disque dur 2.5" à portée de main.
Curieusement, j'ai un dual boot avec windows (xp), mais la lenteur atteint l'OS lui même. Lorsque j'essaie d'accéder au Poste de travail, c'est d'une lenteur affreuse.
Je pensais formater même si ça ne changera pas grand chose étant donné que c'est matériel, et refaire une installation au propre (seulement Fedora).
J'vais quand même essayer d'utiliser les outils de seagate, mais je peux le booter sur une clé usb ou pas ? Car il n'y a pas de lecteur CD sur un netbook ... du moins pas sur le mien.- Modifié
Argh ... Problème matériel, c'est vraiment le dernier truc que je voulais.
J'vais voir pour la garantie, mais je ne crois pas qu'il le soit encore.
Pour l'ouvrir, il y a un procédure particulière ou pas ? Parce que je n'ai jamais fais ça, et je voudrais éviter d'empirer les choses.- Voici
# smartctl -a /dev/sda smartctl 5.40 2010-10-16 r3189 [i386-redhat-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Momentus 5400.5 series Device Model: ST9160310AS Serial Number: 5SV6NH8G Firmware Version: 0303 User Capacity: 160,041,885,696 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Sun Apr 10 21:56:04 2011 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 712) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 62) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 084 081 006 Pre-fail Always - 25059244 3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 782 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 076 060 030 Pre-fail Always - 44019970 9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 2455 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 1 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 747 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 4476 188 Command_Timeout 0x0032 100 094 000 Old_age Always - 839 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 055 051 045 Old_age Always - 45 (Min/Max 26/45) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 292 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 14 193 Load_Cycle_Count 0x0032 074 074 000 Old_age Always - 53017 194 Temperature_Celsius 0x0022 045 049 000 Old_age Always - 45 (0 16 0 0) 195 Hardware_ECC_Recovered 0x001a 054 039 000 Old_age Always - 25059244 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 4494 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4494 occurred at disk power-on lifetime: 2454 hours (102 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 ff ff ff ef 00 00:09:01.015 READ DMA EXT 27 00 00 00 00 00 e0 00 00:09:01.014 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 00 00:09:01.011 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 00:09:01.008 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 00:09:00.980 READ NATIVE MAX ADDRESS EXT Error 4493 occurred at disk power-on lifetime: 2454 hours (102 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 ff ff ff ef 00 00:08:58.594 READ DMA EXT 27 00 00 00 00 00 e0 00 00:08:58.593 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 00 00:08:58.590 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 00:08:58.587 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 00:08:58.551 READ NATIVE MAX ADDRESS EXT Error 4492 occurred at disk power-on lifetime: 2454 hours (102 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 ff ff ff ef 00 00:08:56.217 READ DMA EXT 27 00 00 00 00 00 e0 00 00:08:56.216 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 00 00:08:56.213 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 00:08:56.211 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 00:08:56.183 READ NATIVE MAX ADDRESS EXT Error 4491 occurred at disk power-on lifetime: 2454 hours (102 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 ff ff ff ef 00 00:08:53.830 READ DMA EXT 27 00 00 00 00 00 e0 00 00:08:53.829 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 00 00:08:53.826 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 00:08:53.823 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 00:08:53.787 READ NATIVE MAX ADDRESS EXT Error 4490 occurred at disk power-on lifetime: 2454 hours (102 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 ff ff ff ef 00 00:08:51.453 READ DMA EXT 27 00 00 00 00 00 e0 00 00:08:51.453 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 00 00:08:51.449 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 00:08:51.447 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 00:08:51.420 READ NATIVE MAX ADDRESS EXT SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
- Asus EeePC 1000HA
- Voilà le résultat de dmesg. Vérifier les branchement va être un peu difficile étant donné que c'est un netbook.
$ dmesg 00d480 [ 1.438823] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.438830] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.438836] usb usb3: Product: UHCI Host Controller [ 1.438841] usb usb3: Manufacturer: Linux 2.6.35.11-83.fc14.i686 uhci_hcd [ 1.438846] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.439139] hub 3-0:1.0: USB hub found [ 1.439151] hub 3-0:1.0: 2 ports detected [ 1.439313] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.439328] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.439335] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.439450] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.439512] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800 [ 1.439598] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.439605] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.439611] usb usb4: Product: UHCI Host Controller [ 1.439616] usb usb4: Manufacturer: Linux 2.6.35.11-83.fc14.i686 uhci_hcd [ 1.439621] usb usb4: SerialNumber: 0000:00:1d.2 [ 1.439890] hub 4-0:1.0: USB hub found [ 1.439901] hub 4-0:1.0: 2 ports detected [ 1.440084] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 1.440099] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.440106] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.440226] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.440289] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880 [ 1.440383] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.440390] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.440396] usb usb5: Product: UHCI Host Controller [ 1.440401] usb usb5: Manufacturer: Linux 2.6.35.11-83.fc14.i686 uhci_hcd [ 1.440407] usb usb5: SerialNumber: 0000:00:1d.3 [ 1.440661] hub 5-0:1.0: USB hub found [ 1.440673] hub 5-0:1.0: 2 ports detected [ 1.440983] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.466578] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.466601] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.466781] mice: PS/2 mouse device common for all mice [ 1.467390] rtc_cmos 00:03: RTC can wake from S4 [ 1.467547] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.467600] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 1.467988] device-mapper: uevent: version 1.0.3 [ 1.468342] device-mapper: ioctl: 4.19.1-ioctl (2010-10-12) initialised: dm-devel@redhat.com [ 1.468803] cpuidle: using governor ladder [ 1.469137] cpuidle: using governor menu [ 1.469837] usbcore: registered new interface driver hiddev [ 1.469879] usbcore: registered new interface driver usbhid [ 1.469884] usbhid: USB HID core driver [ 1.469938] nf_conntrack version 0.5.0 (15890 buckets, 63560 max) [ 1.470296] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 1.470302] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 1.470307] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 1.470483] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.470521] TCP cubic registered [ 1.470525] Initializing XFRM netlink socket [ 1.470547] NET: Registered protocol family 17 [ 1.470633] Using IPI No-Shortcut mode [ 1.470904] PM: Resume from disk failed. [ 1.470934] registered taskstats version 1 [ 1.471412] Magic number: 7:926:44 [ 1.471558] rtc_cmos 00:03: setting system clock to 2011-04-10 21:02:57 UTC (1302469377) [ 1.471642] Initalizing network drop monitor service [ 1.493043] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.576913] ata1.00: ATA-8: ST9160310AS, 0303, max UDMA/133 [ 1.576930] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.584706] ata1.00: configured for UDMA/133 [ 1.585050] scsi 0:0:0:0: Direct-Access ATA ST9160310AS 0303 PQ: 0 ANSI: 5 [ 1.585559] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.585579] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.585802] sd 0:0:0:0: [sda] Write Protect is off [ 1.585814] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.585901] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.586464] sda: sda1 sda2 sda3 [ 1.618092] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.618142] Freeing unused kernel memory: 544k freed [ 1.618730] Write protecting the kernel text: 3768k [ 1.618869] Write protecting the kernel read-only data: 1840k [ 1.660617] dracut: dracut-006-6.fc14 [ 1.678426] dracut: rd_NO_LUKS: removing cryptoluks activation [ 1.700101] udev[78]: starting version 161 [ 1.740324] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 1.807861] acpi device:1a: registered as cooling_device2 [ 1.808387] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 1.808555] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 1.834335] psmouse serio1: ID: 10 00 64 [ 1.856089] usb 1-3: New USB device found, idVendor=03f0, idProduct=7611 [ 1.856100] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.856111] usb 1-3: Product: Deskjet F2400 series [ 1.856118] usb 1-3: Manufacturer: HP [ 1.856124] usb 1-3: SerialNumber: CN97L1G0M705BS [ 1.910601] [drm] Initialized drm 1.1.0 20060810 [ 1.981273] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.981287] i915 0000:00:02.0: setting latency timer to 64 [ 2.035718] [drm] set up 7M of stolen space [ 2.039862] elantech: assuming hardware version 2, firmware version 2.0.48 [ 2.068299] usb 1-8: new high speed USB device using ehci_hcd and address 4 [ 2.113172] elantech: Synaptics capabilities query result 0x00, 0x02, 0x64. [ 2.144307] [drm] initialized overlay support [ 2.226965] usb 1-8: New USB device found, idVendor=04f2, idProduct=b071 [ 2.226975] usb 1-8: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 2.226983] usb 1-8: Product: CNF7129 [ 2.226988] usb 1-8: Manufacturer: Chicony Electronics Co., Ltd. [ 2.226995] usb 1-8: SerialNumber: SN0001 [ 2.325454] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6 [ 2.436146] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 2.488183] fbcon: inteldrmfb (fb0) is primary device [ 2.614841] usb 3-2: New USB device found, idVendor=046d, idProduct=c068 [ 2.614850] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.614857] usb 3-2: Product: G500 [ 2.614861] usb 3-2: Manufacturer: Logitech [ 2.614866] usb 3-2: SerialNumber: B8046C42B60018 [ 2.624698] input: Logitech G500 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input7 [ 2.625431] generic-usb 0003:046D:C068.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:1d.1-2/input0 [ 2.636408] input: Logitech G500 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input8 [ 2.637760] generic-usb 0003:046D:C068.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:1d.1-2/input1 [ 2.881355] Console: switching to colour frame buffer device 128x37 [ 2.889398] fb0: inteldrmfb frame buffer device [ 2.889403] drm: registered panic notifier [ 2.889419] Slow work thread pool: Starting up [ 2.889590] Slow work thread pool: Ready [ 2.889610] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.950742] dracut: Starting plymouth daemon [ 3.327208] dracut: rd_NO_DM: removing DM RAID activation [ 3.334060] dracut: rd_NO_MD: removing MD RAID activation [ 6.084907] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 6.084924] ata1.00: BMDMA stat 0x24 [ 6.084939] ata1.00: failed command: READ DMA EXT [ 6.084968] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 6.084974] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 6.084988] ata1.00: status: { DRDY ERR } [ 6.084999] ata1.00: error: { UNC } [ 6.183980] ata1.00: configured for UDMA/133 [ 6.184062] ata1: EH complete [ 8.450083] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 8.450100] ata1.00: BMDMA stat 0x24 [ 8.450115] ata1.00: failed command: READ DMA EXT [ 8.450144] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 8.450151] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 8.450165] ata1.00: status: { DRDY ERR } [ 8.450176] ata1.00: error: { UNC } [ 8.548989] ata1.00: configured for UDMA/133 [ 8.549076] ata1: EH complete [ 10.837657] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 10.837674] ata1.00: BMDMA stat 0x24 [ 10.837689] ata1.00: failed command: READ DMA EXT [ 10.837718] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 10.837725] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 10.837739] ata1.00: status: { DRDY ERR } [ 10.837750] ata1.00: error: { UNC } [ 10.936992] ata1.00: configured for UDMA/133 [ 10.937080] ata1: EH complete [ 13.203098] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 13.203116] ata1.00: BMDMA stat 0x24 [ 13.203132] ata1.00: failed command: READ DMA EXT [ 13.203161] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 13.203167] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 13.203182] ata1.00: status: { DRDY ERR } [ 13.203193] ata1.00: error: { UNC } [ 13.301869] ata1.00: configured for UDMA/133 [ 13.301905] ata1: EH complete [ 15.579547] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 15.579565] ata1.00: BMDMA stat 0x24 [ 15.579580] ata1.00: failed command: READ DMA EXT [ 15.579609] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 15.579616] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 15.579630] ata1.00: status: { DRDY ERR } [ 15.579641] ata1.00: error: { UNC } [ 15.689919] ata1.00: configured for UDMA/133 [ 15.689982] ata1: EH complete [ 17.956106] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 17.956124] ata1.00: BMDMA stat 0x24 [ 17.956139] ata1.00: failed command: READ DMA EXT [ 17.956168] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 17.956175] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 17.956189] ata1.00: status: { DRDY ERR } [ 17.956200] ata1.00: error: { UNC } [ 18.054980] ata1.00: configured for UDMA/133 [ 18.055066] sd 0:0:0:0: [sda] Unhandled sense code [ 18.055079] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 18.055094] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 18.055114] Descriptor sense data with sense descriptors (in hex): [ 18.055125] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 18.055170] 12 a1 9e af [ 18.055188] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 18.055210] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 18.055244] end_request: I/O error, dev sda, sector 312581807 [ 18.055255] Buffer I/O error on device sda, logical block 39072725 [ 18.055306] ata1: EH complete [ 20.332595] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 20.332612] ata1.00: BMDMA stat 0x24 [ 20.332628] ata1.00: failed command: READ DMA EXT [ 20.332657] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 20.332663] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 20.332678] ata1.00: status: { DRDY ERR } [ 20.332688] ata1.00: error: { UNC } [ 20.431985] ata1.00: configured for UDMA/133 [ 20.432070] ata1: EH complete [ 22.709106] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 22.709124] ata1.00: BMDMA stat 0x24 [ 22.709140] ata1.00: failed command: READ DMA EXT [ 22.709169] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 22.709175] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 22.709190] ata1.00: status: { DRDY ERR } [ 22.709201] ata1.00: error: { UNC } [ 22.818896] ata1.00: configured for UDMA/133 [ 22.818933] ata1: EH complete [ 25.107853] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 25.107870] ata1.00: BMDMA stat 0x24 [ 25.107886] ata1.00: failed command: READ DMA EXT [ 25.107915] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 25.107921] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 25.107935] ata1.00: status: { DRDY ERR } [ 25.107946] ata1.00: error: { UNC } [ 25.206999] ata1.00: configured for UDMA/133 [ 25.207080] ata1: EH complete [ 27.484243] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 27.484261] ata1.00: BMDMA stat 0x24 [ 27.484276] ata1.00: failed command: READ DMA EXT [ 27.484306] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 27.484312] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 27.484327] ata1.00: status: { DRDY ERR } [ 27.484338] ata1.00: error: { UNC } [ 27.594993] ata1.00: configured for UDMA/133 [ 27.595080] ata1: EH complete [ 29.871800] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 29.871813] ata1.00: BMDMA stat 0x24 [ 29.871824] ata1.00: failed command: READ DMA EXT [ 29.871844] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 29.871849] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 29.871860] ata1.00: status: { DRDY ERR } [ 29.871868] ata1.00: error: { UNC } [ 29.970917] ata1.00: configured for UDMA/133 [ 29.970963] ata1: EH complete [ 32.259469] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 32.259486] ata1.00: BMDMA stat 0x24 [ 32.259501] ata1.00: failed command: READ DMA EXT [ 32.259530] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 32.259537] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 32.259551] ata1.00: status: { DRDY ERR } [ 32.259562] ata1.00: error: { UNC } [ 32.358982] ata1.00: configured for UDMA/133 [ 32.359068] sd 0:0:0:0: [sda] Unhandled sense code [ 32.359080] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 32.359096] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 32.359116] Descriptor sense data with sense descriptors (in hex): [ 32.359126] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 32.359171] 12 a1 9e af [ 32.359190] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 32.359212] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 32.359246] end_request: I/O error, dev sda, sector 312581807 [ 32.359258] Buffer I/O error on device sda, logical block 39072725 [ 32.359320] ata1: EH complete [ 34.647172] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 34.647189] ata1.00: BMDMA stat 0x24 [ 34.647204] ata1.00: failed command: READ DMA EXT [ 34.647233] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 34.647239] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 34.647254] ata1.00: status: { DRDY ERR } [ 34.647265] ata1.00: error: { UNC } [ 34.756991] ata1.00: configured for UDMA/133 [ 34.757089] ata1: EH complete [ 37.023544] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 37.023556] ata1.00: BMDMA stat 0x24 [ 37.023566] ata1.00: failed command: READ DMA EXT [ 37.023586] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 37.023590] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 37.023600] ata1.00: status: { DRDY ERR } [ 37.023608] ata1.00: error: { UNC } [ 37.122893] ata1.00: configured for UDMA/133 [ 37.122939] ata1: EH complete [ 39.411229] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 39.411247] ata1.00: BMDMA stat 0x24 [ 39.411262] ata1.00: failed command: READ DMA EXT [ 39.411291] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 39.411297] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 39.411312] ata1.00: status: { DRDY ERR } [ 39.411323] ata1.00: error: { UNC } [ 39.521991] ata1.00: configured for UDMA/133 [ 39.522074] ata1: EH complete [ 41.798835] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 41.798852] ata1.00: BMDMA stat 0x24 [ 41.798867] ata1.00: failed command: READ DMA EXT [ 41.798896] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 41.798903] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 41.798917] ata1.00: status: { DRDY ERR } [ 41.798928] ata1.00: error: { UNC } [ 41.897971] ata1.00: configured for UDMA/133 [ 41.898056] ata1: EH complete [ 44.175382] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 44.175399] ata1.00: BMDMA stat 0x24 [ 44.175415] ata1.00: failed command: READ DMA EXT [ 44.175444] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 44.175450] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 44.175464] ata1.00: status: { DRDY ERR } [ 44.175475] ata1.00: error: { UNC } [ 44.274928] ata1.00: configured for UDMA/133 [ 44.274974] ata1: EH complete [ 46.585148] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 46.585165] ata1.00: BMDMA stat 0x24 [ 46.585180] ata1.00: failed command: READ DMA EXT [ 46.585209] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 46.585215] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 46.585230] ata1.00: status: { DRDY ERR } [ 46.585241] ata1.00: error: { UNC } [ 46.694979] ata1.00: configured for UDMA/133 [ 46.695066] sd 0:0:0:0: [sda] Unhandled sense code [ 46.695078] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 46.695093] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 46.695114] Descriptor sense data with sense descriptors (in hex): [ 46.695124] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 46.695169] 12 a1 9e af [ 46.695188] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 46.695210] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 46.695244] end_request: I/O error, dev sda, sector 312581807 [ 46.695255] Buffer I/O error on device sda, logical block 39072725 [ 46.695304] ata1: EH complete [ 49.006069] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 49.006085] ata1.00: BMDMA stat 0x24 [ 49.006100] ata1.00: failed command: READ DMA EXT [ 49.006129] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 49.006135] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 49.006150] ata1.00: status: { DRDY ERR } [ 49.006161] ata1.00: error: { UNC } [ 49.104955] ata1.00: configured for UDMA/133 [ 49.105003] ata1: EH complete [ 51.393672] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 51.393689] ata1.00: BMDMA stat 0x24 [ 51.393704] ata1.00: failed command: READ DMA EXT [ 51.393733] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 51.393740] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 51.393754] ata1.00: status: { DRDY ERR } [ 51.393765] ata1.00: error: { UNC } [ 51.503966] ata1.00: configured for UDMA/133 [ 51.504050] ata1: EH complete [ 53.792381] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 53.792398] ata1.00: BMDMA stat 0x24 [ 53.792413] ata1.00: failed command: READ DMA EXT [ 53.792442] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 53.792449] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 53.792463] ata1.00: status: { DRDY ERR } [ 53.792474] ata1.00: error: { UNC } [ 53.891967] ata1.00: configured for UDMA/133 [ 53.892056] ata1: EH complete [ 56.168813] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 56.168831] ata1.00: BMDMA stat 0x24 [ 56.168846] ata1.00: failed command: READ DMA EXT [ 56.168875] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 56.168881] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 56.168896] ata1.00: status: { DRDY ERR } [ 56.168907] ata1.00: error: { UNC } [ 56.278979] ata1.00: configured for UDMA/133 [ 56.279063] ata1: EH complete [ 58.556534] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 58.556551] ata1.00: BMDMA stat 0x24 [ 58.556567] ata1.00: failed command: READ DMA EXT [ 58.556596] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 58.556602] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 58.556617] ata1.00: status: { DRDY ERR } [ 58.556628] ata1.00: error: { UNC } [ 58.731138] ata1.00: configured for UDMA/133 [ 58.731185] ata1: EH complete [ 61.010752] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 61.010769] ata1.00: BMDMA stat 0x24 [ 61.010784] ata1.00: failed command: READ DMA EXT [ 61.010813] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 61.010819] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 61.010833] ata1.00: status: { DRDY ERR } [ 61.010844] ata1.00: error: { UNC } [ 61.163108] ata1.00: configured for UDMA/133 [ 61.163158] sd 0:0:0:0: [sda] Unhandled sense code [ 61.163170] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 61.163185] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 61.163205] Descriptor sense data with sense descriptors (in hex): [ 61.163216] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 61.163261] 12 a1 9e af [ 61.163279] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 61.163306] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 61.163327] end_request: I/O error, dev sda, sector 312581807 [ 61.163338] Buffer I/O error on device sda, logical block 39072725 [ 61.163396] ata1: EH complete [ 63.442739] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 63.442756] ata1.00: BMDMA stat 0x24 [ 63.442772] ata1.00: failed command: READ DMA EXT [ 63.442801] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 63.442807] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 63.442822] ata1.00: status: { DRDY ERR } [ 63.442833] ata1.00: error: { UNC } [ 63.552916] ata1.00: configured for UDMA/133 [ 63.552962] ata1: EH complete [ 65.841512] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 65.841529] ata1.00: BMDMA stat 0x24 [ 65.841545] ata1.00: failed command: READ DMA EXT [ 65.841573] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 65.841580] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 65.841594] ata1.00: status: { DRDY ERR } [ 65.841605] ata1.00: error: { UNC } [ 65.940981] ata1.00: configured for UDMA/133 [ 65.941064] ata1: EH complete [ 68.206908] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 68.206926] ata1.00: BMDMA stat 0x24 [ 68.206942] ata1.00: failed command: READ DMA EXT [ 68.206971] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 68.206977] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 68.206992] ata1.00: status: { DRDY ERR } [ 68.207003] ata1.00: error: { UNC } [ 68.316978] ata1.00: configured for UDMA/133 [ 68.317062] ata1: EH complete [ 70.583405] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 70.583422] ata1.00: BMDMA stat 0x24 [ 70.583438] ata1.00: failed command: READ DMA EXT [ 70.583467] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 70.583473] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 70.583487] ata1.00: status: { DRDY ERR } [ 70.583498] ata1.00: error: { UNC } [ 70.682984] ata1.00: configured for UDMA/133 [ 70.683067] ata1: EH complete [ 72.959851] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 72.959869] ata1.00: BMDMA stat 0x24 [ 72.959884] ata1.00: failed command: READ DMA EXT [ 72.959913] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 72.959919] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 72.959933] ata1.00: status: { DRDY ERR } [ 72.959944] ata1.00: error: { UNC } [ 73.058985] ata1.00: configured for UDMA/133 [ 73.059066] ata1: EH complete [ 75.325248] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 75.325265] ata1.00: BMDMA stat 0x24 [ 75.325280] ata1.00: failed command: READ DMA EXT [ 75.325309] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 75.325316] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 75.325330] ata1.00: status: { DRDY ERR } [ 75.325341] ata1.00: error: { UNC } [ 75.435957] ata1.00: configured for UDMA/133 [ 75.436047] sd 0:0:0:0: [sda] Unhandled sense code [ 75.436059] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 75.436074] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 75.436095] Descriptor sense data with sense descriptors (in hex): [ 75.436105] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 75.436150] 12 a1 9e af [ 75.436169] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 75.436200] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 75.436221] end_request: I/O error, dev sda, sector 312581807 [ 75.436232] Buffer I/O error on device sda, logical block 39072725 [ 75.436283] ata1: EH complete [ 77.723864] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 77.723882] ata1.00: BMDMA stat 0x24 [ 77.723898] ata1.00: failed command: READ DMA EXT [ 77.723927] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 77.723933] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 77.723948] ata1.00: status: { DRDY ERR } [ 77.723959] ata1.00: error: { UNC } [ 77.822923] ata1.00: configured for UDMA/133 [ 77.822972] ata1: EH complete [ 80.100511] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 80.100529] ata1.00: BMDMA stat 0x24 [ 80.100544] ata1.00: failed command: READ DMA EXT [ 80.100574] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 80.100580] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 80.100595] ata1.00: status: { DRDY ERR } [ 80.100606] ata1.00: error: { UNC } [ 80.211129] ata1.00: configured for UDMA/133 [ 80.211176] ata1: EH complete [ 82.499175] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 82.499192] ata1.00: BMDMA stat 0x24 [ 82.499208] ata1.00: failed command: READ DMA EXT [ 82.499237] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 82.499243] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 82.499258] ata1.00: status: { DRDY ERR } [ 82.499269] ata1.00: error: { UNC } [ 82.597955] ata1.00: configured for UDMA/133 [ 82.598003] ata1: EH complete [ 84.886780] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 84.886797] ata1.00: BMDMA stat 0x24 [ 84.886812] ata1.00: failed command: READ DMA EXT [ 84.886841] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 84.886847] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 84.886862] ata1.00: status: { DRDY ERR } [ 84.886873] ata1.00: error: { UNC } [ 84.996967] ata1.00: configured for UDMA/133 [ 84.997055] ata1: EH complete [ 87.296574] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 87.296591] ata1.00: BMDMA stat 0x24 [ 87.296606] ata1.00: failed command: READ DMA EXT [ 87.296635] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 87.296642] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 87.296656] ata1.00: status: { DRDY ERR } [ 87.296667] ata1.00: error: { UNC } [ 87.395914] ata1.00: configured for UDMA/133 [ 87.395960] ata1: EH complete [ 89.661938] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 89.661955] ata1.00: BMDMA stat 0x24 [ 89.661970] ata1.00: failed command: READ DMA EXT [ 89.661999] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 89.662006] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 89.662056] ata1.00: status: { DRDY ERR } [ 89.662068] ata1.00: error: { UNC } [ 89.760975] ata1.00: configured for UDMA/133 [ 89.761063] sd 0:0:0:0: [sda] Unhandled sense code [ 89.761075] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 89.761091] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 89.761111] Descriptor sense data with sense descriptors (in hex): [ 89.761122] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 89.761167] 12 a1 9e af [ 89.761186] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 89.761218] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 89.761240] end_request: I/O error, dev sda, sector 312581807 [ 89.761251] Buffer I/O error on device sda, logical block 39072725 [ 89.761313] ata1: EH complete [ 92.071838] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 92.071860] ata1.00: BMDMA stat 0x24 [ 92.071881] ata1.00: failed command: READ DMA EXT [ 92.071924] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 92.071933] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 92.071954] ata1.00: status: { DRDY ERR } [ 92.071969] ata1.00: error: { UNC } [ 92.181996] ata1.00: configured for UDMA/133 [ 92.182079] ata1: EH complete [ 94.470515] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 94.470533] ata1.00: BMDMA stat 0x24 [ 94.470548] ata1.00: failed command: READ DMA EXT [ 94.470578] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 94.470584] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 94.470599] ata1.00: status: { DRDY ERR } [ 94.470610] ata1.00: error: { UNC } [ 94.568992] ata1.00: configured for UDMA/133 [ 94.569079] ata1: EH complete [ 96.846856] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 96.846868] ata1.00: BMDMA stat 0x24 [ 96.846879] ata1.00: failed command: READ DMA EXT [ 96.846899] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 96.846904] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 96.846914] ata1.00: status: { DRDY ERR } [ 96.846922] ata1.00: error: { UNC } [ 96.956956] ata1.00: configured for UDMA/133 [ 96.957044] ata1: EH complete [ 99.234668] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 99.234686] ata1.00: BMDMA stat 0x24 [ 99.234701] ata1.00: failed command: READ DMA EXT [ 99.234730] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 99.234736] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 99.234751] ata1.00: status: { DRDY ERR } [ 99.234762] ata1.00: error: { UNC } [ 99.333984] ata1.00: configured for UDMA/133 [ 99.334066] ata1: EH complete [ 101.600048] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 101.600065] ata1.00: BMDMA stat 0x24 [ 101.600081] ata1.00: failed command: READ DMA EXT [ 101.600110] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 101.600117] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 101.600131] ata1.00: status: { DRDY ERR } [ 101.600142] ata1.00: error: { UNC } [ 101.710048] ata1.00: configured for UDMA/133 [ 101.710095] ata1: EH complete [ 103.987670] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 103.987687] ata1.00: BMDMA stat 0x24 [ 103.987703] ata1.00: failed command: READ DMA EXT [ 103.987732] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 103.987738] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 103.987753] ata1.00: status: { DRDY ERR } [ 103.987764] ata1.00: error: { UNC } [ 104.087001] ata1.00: configured for UDMA/133 [ 104.087082] sd 0:0:0:0: [sda] Unhandled sense code [ 104.087094] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 104.087109] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 104.087130] Descriptor sense data with sense descriptors (in hex): [ 104.087140] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 104.087185] 12 a1 9e af [ 104.087204] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 104.087225] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 104.087261] end_request: I/O error, dev sda, sector 312581807 [ 104.087272] Buffer I/O error on device sda, logical block 39072725 [ 104.087317] ata1: EH complete [ 106.419696] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 106.419713] ata1.00: BMDMA stat 0x24 [ 106.419729] ata1.00: failed command: READ DMA EXT [ 106.419758] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 106.419764] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 106.419779] ata1.00: status: { DRDY ERR } [ 106.419790] ata1.00: error: { UNC } [ 106.529985] ata1.00: configured for UDMA/133 [ 106.530070] ata1: EH complete [ 108.796151] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 108.796169] ata1.00: BMDMA stat 0x24 [ 108.796184] ata1.00: failed command: READ DMA EXT [ 108.796214] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 108.796220] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 108.796235] ata1.00: status: { DRDY ERR } [ 108.796246] ata1.00: error: { UNC } [ 108.895084] ata1.00: configured for UDMA/133 [ 108.895133] ata1: EH complete [ 111.172690] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 111.172707] ata1.00: BMDMA stat 0x24 [ 111.172723] ata1.00: failed command: READ DMA EXT [ 111.172752] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 111.172758] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 111.172773] ata1.00: status: { DRDY ERR } [ 111.172784] ata1.00: error: { UNC } [ 111.271991] ata1.00: configured for UDMA/133 [ 111.272080] ata1: EH complete [ 113.549242] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 113.549259] ata1.00: BMDMA stat 0x24 [ 113.549275] ata1.00: failed command: READ DMA EXT [ 113.549304] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 113.549310] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 113.549325] ata1.00: status: { DRDY ERR } [ 113.549336] ata1.00: error: { UNC } [ 113.658996] ata1.00: configured for UDMA/133 [ 113.659083] ata1: EH complete [ 115.936750] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 115.936768] ata1.00: BMDMA stat 0x24 [ 115.936783] ata1.00: failed command: READ DMA EXT [ 115.936812] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 115.936819] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 115.936833] ata1.00: status: { DRDY ERR } [ 115.936844] ata1.00: error: { UNC } [ 116.036003] ata1.00: configured for UDMA/133 [ 116.036094] ata1: EH complete [ 118.302143] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 118.302160] ata1.00: BMDMA stat 0x24 [ 118.302175] ata1.00: failed command: READ DMA EXT [ 118.302204] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 118.302211] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 118.302225] ata1.00: status: { DRDY ERR } [ 118.302236] ata1.00: error: { UNC } [ 118.411987] ata1.00: configured for UDMA/133 [ 118.412072] sd 0:0:0:0: [sda] Unhandled sense code [ 118.412085] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 118.412100] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 118.412121] Descriptor sense data with sense descriptors (in hex): [ 118.412131] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 118.412176] 12 a1 9e af [ 118.412195] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 118.412228] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 118.412249] end_request: I/O error, dev sda, sector 312581807 [ 118.412260] Buffer I/O error on device sda, logical block 39072725 [ 118.412310] ata1: EH complete [ 120.678645] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 120.678662] ata1.00: BMDMA stat 0x24 [ 120.678678] ata1.00: failed command: READ DMA EXT [ 120.678707] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 120.678713] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 120.678728] ata1.00: status: { DRDY ERR } [ 120.678739] ata1.00: error: { UNC } [ 120.818045] ata1.00: configured for UDMA/133 [ 120.818094] ata1: EH complete [ 123.099616] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 123.099634] ata1.00: BMDMA stat 0x24 [ 123.099649] ata1.00: failed command: READ DMA EXT [ 123.099678] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 123.099684] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 123.099698] ata1.00: status: { DRDY ERR } [ 123.099709] ata1.00: error: { UNC } [ 123.250040] ata1.00: configured for UDMA/133 [ 123.250087] ata1: EH complete [ 125.520477] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 125.520495] ata1.00: BMDMA stat 0x24 [ 125.520510] ata1.00: failed command: READ DMA EXT [ 125.520540] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 125.520546] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 125.520561] ata1.00: status: { DRDY ERR } [ 125.520572] ata1.00: error: { UNC } [ 125.619990] ata1.00: configured for UDMA/133 [ 125.620081] ata1: EH complete [ 127.919097] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 127.919114] ata1.00: BMDMA stat 0x24 [ 127.919130] ata1.00: failed command: READ DMA EXT [ 127.919159] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 127.919165] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 127.919180] ata1.00: status: { DRDY ERR } [ 127.919191] ata1.00: error: { UNC } [ 128.029941] ata1.00: configured for UDMA/133 [ 128.029987] ata1: EH complete [ 130.295697] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 130.295714] ata1.00: BMDMA stat 0x24 [ 130.295730] ata1.00: failed command: READ DMA EXT [ 130.295759] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 130.295765] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 130.295780] ata1.00: status: { DRDY ERR } [ 130.295791] ata1.00: error: { UNC } [ 130.394993] ata1.00: configured for UDMA/133 [ 130.395077] ata1: EH complete [ 132.672248] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 132.672265] ata1.00: BMDMA stat 0x24 [ 132.672280] ata1.00: failed command: READ DMA EXT [ 132.672309] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 132.672316] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 132.672330] ata1.00: status: { DRDY ERR } [ 132.672341] ata1.00: error: { UNC } [ 132.770967] ata1.00: configured for UDMA/133 [ 132.771028] sd 0:0:0:0: [sda] Unhandled sense code [ 132.771044] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 132.771066] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 132.771095] Descriptor sense data with sense descriptors (in hex): [ 132.771110] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 132.771174] 12 a1 9e af [ 132.771200] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 132.771230] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 132.771295] end_request: I/O error, dev sda, sector 312581807 [ 132.771309] Buffer I/O error on device sda, logical block 39072725 [ 132.771366] ata1: EH complete [ 135.048637] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 135.048654] ata1.00: BMDMA stat 0x24 [ 135.048669] ata1.00: failed command: READ DMA EXT [ 135.048698] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 135.048704] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 135.048719] ata1.00: status: { DRDY ERR } [ 135.048729] ata1.00: error: { UNC } [ 135.158923] ata1.00: configured for UDMA/133 [ 135.158958] ata1: EH complete [ 137.425148] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 137.425165] ata1.00: BMDMA stat 0x24 [ 137.425180] ata1.00: failed command: READ DMA EXT [ 137.425209] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 137.425216] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 137.425230] ata1.00: status: { DRDY ERR } [ 137.425241] ata1.00: error: { UNC } [ 137.523986] ata1.00: configured for UDMA/133 [ 137.524069] ata1: EH complete [ 139.801653] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 139.801670] ata1.00: BMDMA stat 0x24 [ 139.801686] ata1.00: failed command: READ DMA EXT [ 139.801715] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 139.801721] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 139.801736] ata1.00: status: { DRDY ERR } [ 139.801747] ata1.00: error: { UNC } [ 139.911990] ata1.00: configured for UDMA/133 [ 139.912071] ata1: EH complete [ 142.189354] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 142.189371] ata1.00: BMDMA stat 0x24 [ 142.189387] ata1.00: failed command: READ DMA EXT [ 142.189416] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 142.189422] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 142.189437] ata1.00: status: { DRDY ERR } [ 142.189448] ata1.00: error: { UNC } [ 142.288062] ata1.00: configured for UDMA/133 [ 142.288110] ata1: EH complete [ 144.554699] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 144.554716] ata1.00: BMDMA stat 0x24 [ 144.554731] ata1.00: failed command: READ DMA EXT [ 144.554761] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 144.554767] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 144.554781] ata1.00: status: { DRDY ERR } [ 144.554792] ata1.00: error: { UNC } [ 144.665002] ata1.00: configured for UDMA/133 [ 144.665093] ata1: EH complete [ 146.942310] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 146.942327] ata1.00: BMDMA stat 0x24 [ 146.942342] ata1.00: failed command: READ DMA EXT [ 146.942372] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 146.942378] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 146.942392] ata1.00: status: { DRDY ERR } [ 146.942403] ata1.00: error: { UNC } [ 147.040994] ata1.00: configured for UDMA/133 [ 147.041078] sd 0:0:0:0: [sda] Unhandled sense code [ 147.041090] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 147.041105] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 147.041125] Descriptor sense data with sense descriptors (in hex): [ 147.041135] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 147.041180] 12 a1 9e af [ 147.041199] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 147.041220] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 147.041263] end_request: I/O error, dev sda, sector 312581807 [ 147.041274] Buffer I/O error on device sda, logical block 39072725 [ 147.041324] ata1: EH complete [ 147.539030] dracut: Scanning devices sda3 for LVM logical volumes vg_fedora/lv_root vg_fedora/lv_swap [ 147.725332] dracut: inactive '/dev/vg_fedora/lv_root' [32.31 GiB] inherit [ 147.725668] dracut: inactive '/dev/vg_fedora/lv_home' [31.47 GiB] inherit [ 147.725885] dracut: inactive '/dev/vg_fedora/lv_swap' [1.94 GiB] inherit [ 148.520543] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 148.552977] dracut: Mounted root filesystem /dev/mapper/vg_fedora-lv_root [ 148.706197] dracut: Loading SELinux policy [ 149.025928] type=1404 audit(1302469525.052:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 149.186810] SELinux: 2048 avtab hash slots, 215487 rules. [ 149.333282] SELinux: 2048 avtab hash slots, 215487 rules. [ 150.099179] SELinux: 9 users, 14 roles, 3520 types, 184 bools, 1 sens, 1024 cats [ 150.099191] SELinux: 81 classes, 215487 rules [ 150.111908] SELinux: Completing initialization. [ 150.111916] SELinux: Setting up existing superblocks. [ 150.111936] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 150.111953] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 150.112576] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 150.112594] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 150.112617] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 150.112676] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs [ 150.115096] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 150.115114] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 150.116628] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 150.116650] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 150.116661] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 150.116705] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs [ 150.116729] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 150.116763] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 150.116795] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts [ 150.116815] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 150.117542] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 150.117601] SELinux: initialized (dev dm-0, type ext4), uses xattr [ 150.125630] type=1403 audit(1302469526.153:3): policy loaded auid=4294967295 ses=4294967295 [ 151.084825] dracut: Switching root [ 152.247903] readahead-collector: starting [ 154.197381] udev[412]: starting version 161 [ 155.016374] intel_rng: FWH not detected [ 155.141638] ATL1E 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 155.142293] ATL1E 0000:03:00.0: setting latency timer to 64 [ 155.260468] iTCO_vendor_support: vendor-support=0 [ 155.274802] ACPI: WMI: Mapper loaded [ 155.345120] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 155.348771] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0860) [ 155.349052] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 155.443233] cfg80211: Calling CRDA to update world regulatory domain [ 155.532913] leds_ss4200: no LED devices found [ 155.749961] ath5k 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 155.749986] ath5k 0000:01:00.0: setting latency timer to 64 [ 155.750156] ath5k 0000:01:00.0: registered as 'phy0' [ 156.260199] ath: EEPROM regdomain: 0x60 [ 156.260208] ath: EEPROM indicates we should expect a direct regpair map [ 156.260219] ath: Country alpha2 being used: 00 [ 156.260225] ath: Regpair used: 0x60 [ 156.260584] audit: name_count maxed, losing inode data: dev=00:07, inode=9800 [ 156.260602] audit: name_count maxed, losing inode data: dev=00:07, inode=9800 [ 156.260620] audit: name_count maxed, losing inode data: dev=00:07, inode=9800 [ 156.260637] audit: name_count maxed, losing inode data: dev=00:07, inode=9800 [ 156.260653] audit: name_count maxed, losing inode data: dev=00:07, inode=9800 [ 156.260952] audit: name_count maxed, losing inode data: dev=00:07, inode=9800 [ 156.260971] audit: name_count maxed, losing inode data: dev=00:07, inode=9800 [ 156.260988] audit: name_count maxed, losing inode data: dev=00:07, inode=9800 [ 156.261050] audit: name_count maxed, losing inode data: dev=00:07, inode=9800 [ 156.261068] audit: name_count maxed, losing inode data: dev=00:07, inode=9800 [ 156.261084] audit: name_count maxed, losing inode data: dev=00:07, inode=9800 [ 156.261100] audit: name_count maxed, losing inode data: dev=00:07, inode=9800 [ 156.261116] audit: name_count maxed, losing inode data: dev=00:07, inode=9800 [ 156.261132] audit: name_count maxed, losing inode data: dev=00:07, inode=9800 [ 156.261148] audit: name_count maxed, losing inode data: dev=00:07, inode=9800 [ 156.261164] audit: name_count maxed, losing inode data: dev=00:07, inode=9800 [ 156.261180] audit: name_count maxed, losing inode data: dev=00:07, inode=9800 [ 156.261699] audit: name_count maxed, losing inode data: dev=00:07, inode=9800 [ 156.261721] audit: name_count maxed, losing inode data: dev=00:07, inode=9818 [ 156.261738] audit: name_count maxed, losing inode data: dev=00:07, inode=9818 [ 156.261755] audit: name_count maxed, losing inode data: dev=00:07, inode=9818 [ 156.261771] audit: name_count maxed, losing inode data: dev=00:07, inode=9818 [ 156.261799] audit: name_count maxed, losing inode data: dev=00:07, inode=9818 [ 156.261816] audit: name_count maxed, losing inode data: dev=00:07, inode=9818 [ 156.261835] audit: name_count maxed, losing inode data: dev=00:07, inode=9818 [ 156.261853] audit: name_count maxed, losing inode data: dev=00:07, inode=9818 [ 156.261871] audit: name_count maxed, losing inode data: dev=00:07, inode=9818 [ 156.261889] audit: name_count maxed, losing inode data: dev=00:07, inode=9818 [ 156.261907] audit: name_count maxed, losing inode data: dev=00:07, inode=9818 [ 156.261924] audit: name_count maxed, losing inode data: dev=00:07, inode=9818 [ 156.261943] audit: name_count maxed, losing inode data: dev=00:07, inode=9818 [ 156.787801] Linux video capture interface: v2.00 [ 157.132853] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071) [ 157.150568] input: CNF7129 as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input9 [ 157.150874] usbcore: registered new interface driver uvcvideo [ 157.150883] USB Video Class driver (v1.0.0) [ 160.790466] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 160.790483] ata1.00: BMDMA stat 0x24 [ 160.790498] ata1.00: failed command: READ DMA EXT [ 160.790527] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 160.790533] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 160.790548] ata1.00: status: { DRDY ERR } [ 160.790559] ata1.00: error: { UNC } [ 160.900897] ata1.00: configured for UDMA/133 [ 160.900932] ata1: EH complete [ 163.200181] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 163.200193] ata1.00: BMDMA stat 0x24 [ 163.200203] ata1.00: failed command: READ DMA EXT [ 163.200224] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 163.200229] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 163.200241] ata1.00: status: { DRDY ERR } [ 163.200248] ata1.00: error: { UNC } [ 163.298799] ata1.00: configured for UDMA/133 [ 163.298843] ata1: EH complete [ 165.565565] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 165.565582] ata1.00: BMDMA stat 0x24 [ 165.565597] ata1.00: failed command: READ DMA EXT [ 165.565626] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 165.565633] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 165.565647] ata1.00: status: { DRDY ERR } [ 165.565658] ata1.00: error: { UNC } [ 165.675739] ata1.00: configured for UDMA/133 [ 165.675768] ata1: EH complete [ 167.942052] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 167.942068] ata1.00: BMDMA stat 0x24 [ 167.942083] ata1.00: failed command: READ DMA EXT [ 167.942112] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 167.942119] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 167.942133] ata1.00: status: { DRDY ERR } [ 167.942144] ata1.00: error: { UNC } [ 168.040800] ata1.00: configured for UDMA/133 [ 168.040845] ata1: EH complete [ 170.329735] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 170.329751] ata1.00: BMDMA stat 0x24 [ 170.329766] ata1.00: failed command: READ DMA EXT [ 170.329795] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 170.329802] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 170.329816] ata1.00: status: { DRDY ERR } [ 170.329827] ata1.00: error: { UNC } [ 170.439803] ata1.00: configured for UDMA/133 [ 170.439848] ata1: EH complete [ 172.750705] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 172.750722] ata1.00: BMDMA stat 0x24 [ 172.750737] ata1.00: failed command: READ DMA EXT [ 172.750767] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 172.750773] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 172.750787] ata1.00: status: { DRDY ERR } [ 172.750799] ata1.00: error: { UNC } [ 172.849880] ata1.00: configured for UDMA/133 [ 172.849928] sd 0:0:0:0: [sda] Unhandled sense code [ 172.849939] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 172.849955] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 172.849975] Descriptor sense data with sense descriptors (in hex): [ 172.849985] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 172.850061] 12 a1 9e af [ 172.850081] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 172.850102] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 172.850142] end_request: I/O error, dev sda, sector 312581807 [ 172.850161] Buffer I/O error on device sda, logical block 39072725 [ 172.850239] ata1: EH complete [ 172.956342] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x212 [ 172.956366] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x212 [ 172.963042] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 175.526887] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 175.526900] ata1.00: BMDMA stat 0x24 [ 175.526910] ata1.00: failed command: READ DMA EXT [ 175.526931] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 175.526936] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 175.526946] ata1.00: status: { DRDY ERR } [ 175.526954] ata1.00: error: { UNC } [ 175.625801] ata1.00: configured for UDMA/133 [ 175.625840] ata1: EH complete [ 177.903449] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 177.903465] ata1.00: BMDMA stat 0x24 [ 177.903480] ata1.00: failed command: READ DMA EXT [ 177.903509] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 177.903515] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 177.903530] ata1.00: status: { DRDY ERR } [ 177.903541] ata1.00: error: { UNC } [ 178.002798] ata1.00: configured for UDMA/133 [ 178.002844] ata1: EH complete [ 180.268842] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 180.268858] ata1.00: BMDMA stat 0x24 [ 180.268873] ata1.00: failed command: READ DMA EXT [ 180.268902] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 180.268909] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 180.268923] ata1.00: status: { DRDY ERR } [ 180.268934] ata1.00: error: { UNC } [ 180.367798] ata1.00: configured for UDMA/133 [ 180.367843] ata1: EH complete [ 182.645345] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 182.645362] ata1.00: BMDMA stat 0x24 [ 182.645377] ata1.00: failed command: READ DMA EXT [ 182.645406] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 182.645412] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 182.645427] ata1.00: status: { DRDY ERR } [ 182.645438] ata1.00: error: { UNC } [ 182.830915] ata1.00: configured for UDMA/133 [ 182.830962] ata1: EH complete [ 185.132835] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 185.132851] ata1.00: BMDMA stat 0x24 [ 185.132866] ata1.00: failed command: READ DMA EXT [ 185.132895] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 185.132902] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 185.132916] ata1.00: status: { DRDY ERR } [ 185.132927] ata1.00: error: { UNC } [ 185.249807] ata1.00: configured for UDMA/133 [ 185.249853] ata1: EH complete [ 187.531607] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 187.531624] ata1.00: BMDMA stat 0x24 [ 187.531639] ata1.00: failed command: READ DMA EXT [ 187.531668] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 187.531675] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 187.531689] ata1.00: status: { DRDY ERR } [ 187.531700] ata1.00: error: { UNC } [ 187.630775] ata1.00: configured for UDMA/133 [ 187.630824] sd 0:0:0:0: [sda] Unhandled sense code [ 187.630835] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 187.630850] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 187.630870] Descriptor sense data with sense descriptors (in hex): [ 187.630881] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 187.630926] 12 a1 9e af [ 187.630945] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 187.630966] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 187.631039] end_request: I/O error, dev sda, sector 312581807 [ 187.631058] Buffer I/O error on device sda, logical block 39072725 [ 187.631153] ata1: EH complete [ 189.907993] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 189.908043] ata1.00: BMDMA stat 0x24 [ 189.908059] ata1.00: failed command: READ DMA EXT [ 189.908088] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 189.908095] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 189.908109] ata1.00: status: { DRDY ERR } [ 189.908120] ata1.00: error: { UNC } [ 190.006780] ata1.00: configured for UDMA/133 [ 190.006820] ata1: EH complete [ 192.284656] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 192.284672] ata1.00: BMDMA stat 0x24 [ 192.284687] ata1.00: failed command: READ DMA EXT [ 192.284716] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 192.284723] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 192.284737] ata1.00: status: { DRDY ERR } [ 192.284748] ata1.00: error: { UNC } [ 192.394715] ata1.00: configured for UDMA/133 [ 192.394745] ata1: EH complete [ 194.694361] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 194.694378] ata1.00: BMDMA stat 0x24 [ 194.694393] ata1.00: failed command: READ DMA EXT [ 194.694422] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 194.694429] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 194.694443] ata1.00: status: { DRDY ERR } [ 194.694454] ata1.00: error: { UNC } [ 194.794070] ata1.00: configured for UDMA/133 [ 194.794115] ata1: EH complete [ 197.081894] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 197.081906] ata1.00: BMDMA stat 0x24 [ 197.081916] ata1.00: failed command: READ DMA EXT [ 197.081931] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 197.081934] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 197.081941] ata1.00: status: { DRDY ERR } [ 197.081946] ata1.00: error: { UNC } [ 197.191797] ata1.00: configured for UDMA/133 [ 197.191842] ata1: EH complete [ 199.502886] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 199.502903] ata1.00: BMDMA stat 0x24 [ 199.502918] ata1.00: failed command: READ DMA EXT [ 199.502947] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 199.502953] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 199.502968] ata1.00: status: { DRDY ERR } [ 199.502979] ata1.00: error: { UNC } [ 199.601707] ata1.00: configured for UDMA/133 [ 199.601738] ata1: EH complete [ 201.890532] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 201.890548] ata1.00: BMDMA stat 0x24 [ 201.890563] ata1.00: failed command: READ DMA EXT [ 201.890593] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 201.890599] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 201.890613] ata1.00: status: { DRDY ERR } [ 201.890624] ata1.00: error: { UNC } [ 202.000926] ata1.00: configured for UDMA/133 [ 202.000974] sd 0:0:0:0: [sda] Unhandled sense code [ 202.000985] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 202.001000] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 202.001053] Descriptor sense data with sense descriptors (in hex): [ 202.001064] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 202.001109] 12 a1 9e af [ 202.001128] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 202.001150] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 202.001189] end_request: I/O error, dev sda, sector 312581807 [ 202.001208] Buffer I/O error on device sda, logical block 39072725 [ 202.001295] ata1: EH complete [ 202.047390] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input10 [ 202.047810] eeepc_wmi: Backlight controlled by ACPI video driver [ 202.265904] audit: name_count maxed, losing inode data: dev=00:07, inode=9800 [ 202.265920] audit: name_count maxed, losing inode data: dev=00:07, inode=10929 [ 202.265928] phy0: Selected rate control algorithm 'minstrel' [ 202.265966] audit: name_count maxed, losing inode data: dev=00:07, inode=9800 [ 202.265979] audit: name_count maxed, losing inode data: dev=00:07, inode=10931 [ 202.265990] audit: name_count maxed, losing inode data: dev=00:07, inode=10931 [ 202.266001] audit: name_count maxed, losing inode data: dev=00:07, inode=10931 [ 202.266018] audit: name_count maxed, losing inode data: dev=00:07, inode=10931 [ 202.266034] audit: name_count maxed, losing inode data: dev=00:07, inode=10931 [ 202.266050] audit: name_count maxed, losing inode data: dev=00:07, inode=10931 [ 202.266078] audit: name_count maxed, losing inode data: dev=00:07, inode=10931 [ 202.266089] audit: name_count maxed, losing inode data: dev=00:07, inode=10931 [ 202.266567] Registered led device: ath5k-phy0::rx [ 202.266669] Registered led device: ath5k-phy0::tx [ 202.266680] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 202.299938] cfg80211: World regulatory domain updated: [ 202.299949] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 202.299960] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 202.299970] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 202.299981] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 202.299991] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 202.300001] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 202.973091] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 202.973227] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 202.973481] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 203.027686] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7611 [ 203.029348] usbcore: registered new interface driver usblp [ 203.310919] ALSA sound/pci/hda/patch_realtek.c:1308: SKU: Nid=0x1d sku_cfg=0x4005822d [ 203.310933] ALSA sound/pci/hda/patch_realtek.c:1310: SKU: port_connectivity=0x1 [ 203.310943] ALSA sound/pci/hda/patch_realtek.c:1311: SKU: enable_pcbeep=0x0 [ 203.310952] ALSA sound/pci/hda/patch_realtek.c:1312: SKU: check_sum=0x00000005 [ 203.310962] ALSA sound/pci/hda/patch_realtek.c:1313: SKU: customization=0x00000082 [ 203.310972] ALSA sound/pci/hda/patch_realtek.c:1314: SKU: external_amp=0x5 [ 203.310981] ALSA sound/pci/hda/patch_realtek.c:1315: SKU: platform_type=0x1 [ 203.310991] ALSA sound/pci/hda/patch_realtek.c:1316: SKU: swap=0x0 [ 203.311001] ALSA sound/pci/hda/patch_realtek.c:1317: SKU: override=0x1 [ 205.610781] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 205.610797] ata1.00: BMDMA stat 0x24 [ 205.610812] ata1.00: failed command: READ DMA EXT [ 205.610841] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 205.610848] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 205.610862] ata1.00: status: { DRDY ERR } [ 205.610873] ata1.00: error: { UNC } [ 205.709900] ata1.00: configured for UDMA/133 [ 205.709941] ata1: EH complete [ 207.987340] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 207.987357] ata1.00: BMDMA stat 0x24 [ 207.987372] ata1.00: failed command: READ DMA EXT [ 207.987401] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 207.987408] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 207.987422] ata1.00: status: { DRDY ERR } [ 207.987433] ata1.00: error: { UNC } [ 208.097981] ata1.00: configured for UDMA/133 [ 208.098066] ata1: EH complete [ 210.363786] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 210.363802] ata1.00: BMDMA stat 0x24 [ 210.363817] ata1.00: failed command: READ DMA EXT [ 210.363846] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 210.363853] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 210.363867] ata1.00: status: { DRDY ERR } [ 210.363878] ata1.00: error: { UNC } [ 210.462904] ata1.00: configured for UDMA/133 [ 210.462949] ata1: EH complete [ 212.773584] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 212.773600] ata1.00: BMDMA stat 0x24 [ 212.773615] ata1.00: failed command: READ DMA EXT [ 212.773644] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 212.773651] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 212.773665] ata1.00: status: { DRDY ERR } [ 212.773676] ata1.00: error: { UNC } [ 212.883989] ata1.00: configured for UDMA/133 [ 212.884076] ata1: EH complete [ 215.150112] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 215.150129] ata1.00: BMDMA stat 0x24 [ 215.150144] ata1.00: failed command: READ DMA EXT [ 215.150173] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 215.150180] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 215.150194] ata1.00: status: { DRDY ERR } [ 215.150205] ata1.00: error: { UNC } [ 215.248986] ata1.00: configured for UDMA/133 [ 215.249074] ata1: EH complete [ 217.548816] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 217.548832] ata1.00: BMDMA stat 0x24 [ 217.548847] ata1.00: failed command: READ DMA EXT [ 217.548876] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 217.548883] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 217.548897] ata1.00: status: { DRDY ERR } [ 217.548908] ata1.00: error: { UNC } [ 217.658984] ata1.00: configured for UDMA/133 [ 217.659023] sd 0:0:0:0: [sda] Unhandled sense code [ 217.659031] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 217.659043] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 217.659057] Descriptor sense data with sense descriptors (in hex): [ 217.659065] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 217.659087] 12 a1 9e af [ 217.659097] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 217.659108] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 217.659128] end_request: I/O error, dev sda, sector 312581807 [ 217.659139] Buffer I/O error on device sda, logical block 39072725 [ 217.659197] ata1: EH complete [ 219.925311] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 219.925328] ata1.00: BMDMA stat 0x24 [ 219.925343] ata1.00: failed command: READ DMA EXT [ 219.925372] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 219.925378] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 219.925393] ata1.00: status: { DRDY ERR } [ 219.925404] ata1.00: error: { UNC } [ 220.024985] ata1.00: configured for UDMA/133 [ 220.025071] ata1: EH complete [ 222.290696] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 222.290713] ata1.00: BMDMA stat 0x24 [ 222.290728] ata1.00: failed command: READ DMA EXT [ 222.290757] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 222.290763] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 222.290778] ata1.00: status: { DRDY ERR } [ 222.290789] ata1.00: error: { UNC } [ 222.401208] ata1.00: configured for UDMA/133 [ 222.401254] ata1: EH complete [ 224.678312] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 224.678328] ata1.00: BMDMA stat 0x24 [ 224.678344] ata1.00: failed command: READ DMA EXT [ 224.678372] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 224.678379] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 224.678393] ata1.00: status: { DRDY ERR } [ 224.678404] ata1.00: error: { UNC } [ 224.776994] ata1.00: configured for UDMA/133 [ 224.777083] ata1: EH complete [ 227.043607] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 227.043619] ata1.00: BMDMA stat 0x24 [ 227.043630] ata1.00: failed command: READ DMA EXT [ 227.043651] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 227.043655] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 227.043666] ata1.00: status: { DRDY ERR } [ 227.043673] ata1.00: error: { UNC } [ 227.153989] ata1.00: configured for UDMA/133 [ 227.154076] ata1: EH complete [ 229.431230] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 229.431246] ata1.00: BMDMA stat 0x24 [ 229.431262] ata1.00: failed command: READ DMA EXT [ 229.431291] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 229.431297] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 229.431312] ata1.00: status: { DRDY ERR } [ 229.431323] ata1.00: error: { UNC } [ 229.529925] ata1.00: configured for UDMA/133 [ 229.529970] ata1: EH complete [ 231.818975] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 231.818992] ata1.00: BMDMA stat 0x24 [ 231.819041] ata1.00: failed command: READ DMA EXT [ 231.819071] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 231.819077] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 231.819092] ata1.00: status: { DRDY ERR } [ 231.819103] ata1.00: error: { UNC } [ 231.928870] ata1.00: configured for UDMA/133 [ 231.928902] sd 0:0:0:0: [sda] Unhandled sense code [ 231.928907] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 231.928915] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 231.928926] Descriptor sense data with sense descriptors (in hex): [ 231.928931] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 231.928954] 12 a1 9e af [ 231.928963] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 231.928974] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 231.928994] end_request: I/O error, dev sda, sector 312581807 [ 231.929028] Buffer I/O error on device sda, logical block 39072725 [ 231.929087] ata1: EH complete [ 234.295469] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 234.295486] ata1.00: BMDMA stat 0x24 [ 234.295501] ata1.00: failed command: READ DMA EXT [ 234.295530] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 234.295536] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 234.295551] ata1.00: status: { DRDY ERR } [ 234.295562] ata1.00: error: { UNC } [ 234.394851] ata1.00: configured for UDMA/133 [ 234.394876] ata1: EH complete [ 236.671873] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 236.671889] ata1.00: BMDMA stat 0x24 [ 236.671905] ata1.00: failed command: READ DMA EXT [ 236.671934] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 236.671940] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 236.671954] ata1.00: status: { DRDY ERR } [ 236.671965] ata1.00: error: { UNC } [ 236.781925] ata1.00: configured for UDMA/133 [ 236.781971] ata1: EH complete [ 239.048319] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 239.048335] ata1.00: BMDMA stat 0x24 [ 239.048350] ata1.00: failed command: READ DMA EXT [ 239.048379] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 239.048386] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 239.048400] ata1.00: status: { DRDY ERR } [ 239.048411] ata1.00: error: { UNC } [ 239.147952] ata1.00: configured for UDMA/133 [ 239.148001] ata1: EH complete [ 241.435939] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 241.435956] ata1.00: BMDMA stat 0x24 [ 241.435971] ata1.00: failed command: READ DMA EXT [ 241.436000] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 241.436007] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 241.436054] ata1.00: status: { DRDY ERR } [ 241.436066] ata1.00: error: { UNC } [ 241.545836] ata1.00: configured for UDMA/133 [ 241.545866] ata1: EH complete [ 243.823583] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 243.823600] ata1.00: BMDMA stat 0x24 [ 243.823615] ata1.00: failed command: READ DMA EXT [ 243.823644] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 243.823650] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 243.823665] ata1.00: status: { DRDY ERR } [ 243.823676] ata1.00: error: { UNC } [ 243.962983] ata1.00: configured for UDMA/133 [ 243.963065] ata1: EH complete [ 246.244562] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 246.244578] ata1.00: BMDMA stat 0x24 [ 246.244593] ata1.00: failed command: READ DMA EXT [ 246.244622] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 246.244629] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 246.244643] ata1.00: status: { DRDY ERR } [ 246.244654] ata1.00: error: { UNC } [ 246.408000] ata1.00: configured for UDMA/133 [ 246.408089] sd 0:0:0:0: [sda] Unhandled sense code [ 246.408101] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 246.408117] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 246.408137] Descriptor sense data with sense descriptors (in hex): [ 246.408147] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 246.408192] 12 a1 9e af [ 246.408211] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 246.408240] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 246.408260] end_request: I/O error, dev sda, sector 312581807 [ 246.408272] Buffer I/O error on device sda, logical block 39072725 [ 246.408336] ata1: EH complete [ 248.676586] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 248.676603] ata1.00: BMDMA stat 0x24 [ 248.676618] ata1.00: failed command: READ DMA EXT [ 248.676647] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 248.676653] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 248.676668] ata1.00: status: { DRDY ERR } [ 248.676679] ata1.00: error: { UNC } [ 248.775902] ata1.00: configured for UDMA/133 [ 248.775946] ata1: EH complete [ 251.064080] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 251.064096] ata1.00: BMDMA stat 0x24 [ 251.064111] ata1.00: failed command: READ DMA EXT [ 251.064140] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 251.064147] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 251.064161] ata1.00: status: { DRDY ERR } [ 251.064172] ata1.00: error: { UNC } [ 251.173907] ata1.00: configured for UDMA/133 [ 251.173952] ata1: EH complete [ 253.440571] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 253.440588] ata1.00: BMDMA stat 0x24 [ 253.440603] ata1.00: failed command: READ DMA EXT [ 253.440632] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 253.440638] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 253.440653] ata1.00: status: { DRDY ERR } [ 253.440664] ata1.00: error: { UNC } [ 253.539910] ata1.00: configured for UDMA/133 [ 253.539955] ata1: EH complete [ 255.817159] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 255.817181] ata1.00: BMDMA stat 0x24 [ 255.817201] ata1.00: failed command: READ DMA EXT [ 255.817241] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 255.817250] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 255.817271] ata1.00: status: { DRDY ERR } [ 255.817287] ata1.00: error: { UNC } [ 255.926985] ata1.00: configured for UDMA/133 [ 255.927071] ata1: EH complete [ 258.193646] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 258.193663] ata1.00: BMDMA stat 0x24 [ 258.193678] ata1.00: failed command: READ DMA EXT [ 258.193707] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 258.193714] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 258.193728] ata1.00: status: { DRDY ERR } [ 258.193739] ata1.00: error: { UNC } [ 258.292942] ata1.00: configured for UDMA/133 [ 258.292987] ata1: EH complete [ 260.625674] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 260.625691] ata1.00: BMDMA stat 0x24 [ 260.625706] ata1.00: failed command: READ DMA EXT [ 260.625736] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 260.625742] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 260.625757] ata1.00: status: { DRDY ERR } [ 260.625768] ata1.00: error: { UNC } [ 260.735981] ata1.00: configured for UDMA/133 [ 260.736071] sd 0:0:0:0: [sda] Unhandled sense code [ 260.736084] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 260.736099] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 260.736120] Descriptor sense data with sense descriptors (in hex): [ 260.736130] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 260.736175] 12 a1 9e af [ 260.736194] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 260.736220] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 260.736241] end_request: I/O error, dev sda, sector 312581807 [ 260.736252] Buffer I/O error on device sda, logical block 39072725 [ 260.736319] ata1: EH complete [ 260.883026] microcode: CPU0 updated to revision 0x218, date = 2009-04-10 [ 260.890403] microcode: CPU1 updated to revision 0x218, date = 2009-04-10 [ 260.926524] cfg80211: Calling CRDA for country: FR [ 260.944600] cfg80211: Regulatory domain changed to country: FR [ 260.944607] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 260.944615] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 260.944621] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 260.944627] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 260.944633] (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 263.235390] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 263.235407] ata1.00: BMDMA stat 0x24 [ 263.235422] ata1.00: failed command: READ DMA EXT [ 263.235451] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 263.235458] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 263.235472] ata1.00: status: { DRDY ERR } [ 263.235483] ata1.00: error: { UNC } [ 263.335053] ata1.00: configured for UDMA/133 [ 263.335100] ata1: EH complete [ 265.611889] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 265.611906] ata1.00: BMDMA stat 0x24 [ 265.611921] ata1.00: failed command: READ DMA EXT [ 265.611950] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 265.611957] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 265.611971] ata1.00: status: { DRDY ERR } [ 265.611982] ata1.00: error: { UNC } [ 265.721976] ata1.00: configured for UDMA/133 [ 265.722061] ata1: EH complete [ 267.999499] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 267.999517] ata1.00: BMDMA stat 0x24 [ 267.999532] ata1.00: failed command: READ DMA EXT [ 267.999561] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 267.999568] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 267.999582] ata1.00: status: { DRDY ERR } [ 267.999593] ata1.00: error: { UNC } [ 268.099088] ata1.00: configured for UDMA/133 [ 268.099138] ata1: EH complete [ 270.376000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 270.376059] ata1.00: BMDMA stat 0x24 [ 270.376075] ata1.00: failed command: READ DMA EXT [ 270.376104] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 270.376110] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 270.376125] ata1.00: status: { DRDY ERR } [ 270.376136] ata1.00: error: { UNC } [ 270.475095] ata1.00: configured for UDMA/133 [ 270.475144] ata1: EH complete [ 272.741338] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 272.741354] ata1.00: BMDMA stat 0x24 [ 272.741370] ata1.00: failed command: READ DMA EXT [ 272.741399] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 272.741405] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 272.741420] ata1.00: status: { DRDY ERR } [ 272.741431] ata1.00: error: { UNC } [ 272.841100] ata1.00: configured for UDMA/133 [ 272.841150] ata1: EH complete [ 275.129050] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 275.129067] ata1.00: BMDMA stat 0x24 [ 275.129082] ata1.00: failed command: READ DMA EXT [ 275.129112] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 275.129118] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 275.129133] ata1.00: status: { DRDY ERR } [ 275.129144] ata1.00: error: { UNC } [ 275.239085] ata1.00: configured for UDMA/133 [ 275.239136] sd 0:0:0:0: [sda] Unhandled sense code [ 275.239147] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 275.239162] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 275.239183] Descriptor sense data with sense descriptors (in hex): [ 275.239193] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 275.239238] 12 a1 9e af [ 275.239257] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 275.239278] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 275.239317] end_request: I/O error, dev sda, sector 312581807 [ 275.239337] Buffer I/O error on device sda, logical block 39072725 [ 275.239415] ata1: EH complete [ 277.727599] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 277.727616] ata1.00: BMDMA stat 0x24 [ 277.727631] ata1.00: failed command: READ DMA EXT [ 277.727660] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 277.727667] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 277.727681] ata1.00: status: { DRDY ERR } [ 277.727692] ata1.00: error: { UNC } [ 277.826994] ata1.00: configured for UDMA/133 [ 277.827079] ata1: EH complete [ 280.115143] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 280.115159] ata1.00: BMDMA stat 0x24 [ 280.115174] ata1.00: failed command: READ DMA EXT [ 280.115203] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 280.115210] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 280.115224] ata1.00: status: { DRDY ERR } [ 280.115235] ata1.00: error: { UNC } [ 280.225919] ata1.00: configured for UDMA/133 [ 280.225966] ata1: EH complete [ 282.491761] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 282.491778] ata1.00: BMDMA stat 0x24 [ 282.491793] ata1.00: failed command: READ DMA EXT [ 282.491822] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 282.491828] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 282.491843] ata1.00: status: { DRDY ERR } [ 282.491854] ata1.00: error: { UNC } [ 282.591001] ata1.00: configured for UDMA/133 [ 282.591086] ata1: EH complete [ 284.879315] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 284.879332] ata1.00: BMDMA stat 0x24 [ 284.879347] ata1.00: failed command: READ DMA EXT [ 284.879376] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 284.879382] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 284.879397] ata1.00: status: { DRDY ERR } [ 284.879408] ata1.00: error: { UNC } [ 284.978931] ata1.00: configured for UDMA/133 [ 284.978977] ata1: EH complete [ 287.266919] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 287.266936] ata1.00: BMDMA stat 0x24 [ 287.266951] ata1.00: failed command: READ DMA EXT [ 287.266980] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 287.266986] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 287.267001] ata1.00: status: { DRDY ERR } [ 287.267073] ata1.00: error: { UNC } [ 287.376991] ata1.00: configured for UDMA/133 [ 287.377072] ata1: EH complete [ 289.654489] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 289.654506] ata1.00: BMDMA stat 0x24 [ 289.654521] ata1.00: failed command: READ DMA EXT [ 289.654551] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 289.654557] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 289.654572] ata1.00: status: { DRDY ERR } [ 289.654584] ata1.00: error: { UNC } [ 289.753900] ata1.00: configured for UDMA/133 [ 289.753950] sd 0:0:0:0: [sda] Unhandled sense code [ 289.753962] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 289.753977] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 289.753997] Descriptor sense data with sense descriptors (in hex): [ 289.754040] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 289.754086] 12 a1 9e af [ 289.754105] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 289.754126] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 289.754166] end_request: I/O error, dev sda, sector 312581807 [ 289.754185] Buffer I/O error on device sda, logical block 39072725 [ 289.754276] ata1: EH complete [ 292.031058] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 292.031075] ata1.00: BMDMA stat 0x24 [ 292.031090] ata1.00: failed command: READ DMA EXT [ 292.031119] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 292.031125] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 292.031140] ata1.00: status: { DRDY ERR } [ 292.031151] ata1.00: error: { UNC } [ 292.140976] ata1.00: configured for UDMA/133 [ 292.141066] ata1: EH complete [ 294.451901] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 294.451918] ata1.00: BMDMA stat 0x24 [ 294.451933] ata1.00: failed command: READ DMA EXT [ 294.451962] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 294.451968] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 294.451983] ata1.00: status: { DRDY ERR } [ 294.451994] ata1.00: error: { UNC } [ 294.551048] ata1.00: configured for UDMA/133 [ 294.551096] ata1: EH complete [ 296.828498] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 296.828515] ata1.00: BMDMA stat 0x24 [ 296.828530] ata1.00: failed command: READ DMA EXT [ 296.828560] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 296.828566] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 296.828581] ata1.00: status: { DRDY ERR } [ 296.828592] ata1.00: error: { UNC } [ 296.938958] ata1.00: configured for UDMA/133 [ 296.939047] ata1: EH complete [ 299.216127] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 299.216144] ata1.00: BMDMA stat 0x24 [ 299.216159] ata1.00: failed command: READ DMA EXT [ 299.216189] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 299.216195] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 299.216210] ata1.00: status: { DRDY ERR } [ 299.216221] ata1.00: error: { UNC } [ 299.314984] ata1.00: configured for UDMA/133 [ 299.315067] ata1: EH complete [ 301.581407] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 301.581423] ata1.00: BMDMA stat 0x24 [ 301.581439] ata1.00: failed command: READ DMA EXT [ 301.581467] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 301.581474] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 301.581489] ata1.00: status: { DRDY ERR } [ 301.581500] ata1.00: error: { UNC } [ 301.691987] ata1.00: configured for UDMA/133 [ 301.692064] ata1: EH complete [ 303.980167] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 303.980184] ata1.00: BMDMA stat 0x24 [ 303.980199] ata1.00: failed command: READ DMA EXT [ 303.980228] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 303.980234] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 303.980249] ata1.00: status: { DRDY ERR } [ 303.980260] ata1.00: error: { UNC } [ 304.119054] ata1.00: configured for UDMA/133 [ 304.119105] sd 0:0:0:0: [sda] Unhandled sense code [ 304.119116] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 304.119131] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 304.119152] Descriptor sense data with sense descriptors (in hex): [ 304.119162] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 304.119207] 12 a1 9e af [ 304.119226] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 304.119247] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 304.119287] end_request: I/O error, dev sda, sector 312581807 [ 304.119316] Buffer I/O error on device sda, logical block 39072725 [ 304.119379] ata1: EH complete [ 308.599872] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 308.599890] ata1.00: BMDMA stat 0x24 [ 308.599906] ata1.00: failed command: READ DMA EXT [ 308.599935] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 308.599942] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 308.599956] ata1.00: status: { DRDY ERR } [ 308.599967] ata1.00: error: { UNC } [ 308.709981] ata1.00: configured for UDMA/133 [ 308.710061] ata1: EH complete [ 310.976436] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 310.976454] ata1.00: BMDMA stat 0x24 [ 310.976469] ata1.00: failed command: READ DMA EXT [ 310.976499] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 310.976505] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 310.976520] ata1.00: status: { DRDY ERR } [ 310.976531] ata1.00: error: { UNC } [ 311.075975] ata1.00: configured for UDMA/133 [ 311.076066] ata1: EH complete [ 313.352880] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 313.352898] ata1.00: BMDMA stat 0x24 [ 313.352913] ata1.00: failed command: READ DMA EXT [ 313.352942] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 313.352949] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 313.352963] ata1.00: status: { DRDY ERR } [ 313.352974] ata1.00: error: { UNC } [ 313.463142] ata1.00: configured for UDMA/133 [ 313.463190] ata1: EH complete [ 315.740541] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 315.740559] ata1.00: BMDMA stat 0x24 [ 315.740574] ata1.00: failed command: READ DMA EXT [ 315.740602] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 315.740609] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 315.740624] ata1.00: status: { DRDY ERR } [ 315.740635] ata1.00: error: { UNC } [ 315.839937] ata1.00: configured for UDMA/133 [ 315.839985] ata1: EH complete [ 318.150353] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 318.150370] ata1.00: BMDMA stat 0x24 [ 318.150385] ata1.00: failed command: READ DMA EXT [ 318.150414] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 318.150421] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 318.150435] ata1.00: status: { DRDY ERR } [ 318.150446] ata1.00: error: { UNC } [ 318.260941] ata1.00: configured for UDMA/133 [ 318.260987] ata1: EH complete [ 320.560201] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 320.560218] ata1.00: BMDMA stat 0x24 [ 320.560233] ata1.00: failed command: READ DMA EXT [ 320.560262] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 320.560269] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 320.560283] ata1.00: status: { DRDY ERR } [ 320.560294] ata1.00: error: { UNC } [ 320.669902] ata1.00: configured for UDMA/133 [ 320.669950] sd 0:0:0:0: [sda] Unhandled sense code [ 320.669962] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 320.669977] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 320.669997] Descriptor sense data with sense descriptors (in hex): [ 320.670061] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 320.670123] 12 a1 9e af [ 320.670149] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 320.670178] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 320.670232] end_request: I/O error, dev sda, sector 312581807 [ 320.670260] Buffer I/O error on device sda, logical block 39072725 [ 320.670316] ata1: EH complete [ 322.958884] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 322.958902] ata1.00: BMDMA stat 0x24 [ 322.958917] ata1.00: failed command: READ DMA EXT [ 322.958947] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 322.958953] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 322.958968] ata1.00: status: { DRDY ERR } [ 322.958979] ata1.00: error: { UNC } [ 323.057984] ata1.00: configured for UDMA/133 [ 323.058064] ata1: EH complete [ 325.324209] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 325.324226] ata1.00: BMDMA stat 0x24 [ 325.324241] ata1.00: failed command: READ DMA EXT [ 325.324270] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 325.324277] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 325.324291] ata1.00: status: { DRDY ERR } [ 325.324302] ata1.00: error: { UNC } [ 325.435005] ata1.00: configured for UDMA/133 [ 325.435094] ata1: EH complete [ 327.700787] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 327.700804] ata1.00: BMDMA stat 0x24 [ 327.700819] ata1.00: failed command: READ DMA EXT [ 327.700848] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 327.700855] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 327.700869] ata1.00: status: { DRDY ERR } [ 327.700880] ata1.00: error: { UNC } [ 327.799981] ata1.00: configured for UDMA/133 [ 327.800062] ata1: EH complete [ 330.099498] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 330.099515] ata1.00: BMDMA stat 0x24 [ 330.099529] ata1.00: failed command: READ DMA EXT [ 330.099558] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 330.099565] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 330.099579] ata1.00: status: { DRDY ERR } [ 330.099590] ata1.00: error: { UNC } [ 330.209964] ata1.00: configured for UDMA/133 [ 330.210051] ata1: EH complete [ 332.476072] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 332.476089] ata1.00: BMDMA stat 0x24 [ 332.476104] ata1.00: failed command: READ DMA EXT [ 332.476133] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 332.476139] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 332.476154] ata1.00: status: { DRDY ERR } [ 332.476165] ata1.00: error: { UNC } [ 332.574984] ata1.00: configured for UDMA/133 [ 332.575074] ata1: EH complete [ 334.863555] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 334.863573] ata1.00: BMDMA stat 0x24 [ 334.863588] ata1.00: failed command: READ DMA EXT [ 334.863617] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 334.863623] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 334.863638] ata1.00: status: { DRDY ERR } [ 334.863649] ata1.00: error: { UNC } [ 334.973978] ata1.00: configured for UDMA/133 [ 334.974063] sd 0:0:0:0: [sda] Unhandled sense code [ 334.974075] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 334.974090] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 334.974110] Descriptor sense data with sense descriptors (in hex): [ 334.974121] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 334.974166] 12 a1 9e af [ 334.974185] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 334.974206] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 334.974240] end_request: I/O error, dev sda, sector 312581807 [ 334.974252] Buffer I/O error on device sda, logical block 39072725 [ 334.974302] ata1: EH complete [ 337.240151] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 337.240169] ata1.00: BMDMA stat 0x24 [ 337.240184] ata1.00: failed command: READ DMA EXT [ 337.240213] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 337.240220] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 337.240235] ata1.00: status: { DRDY ERR } [ 337.240246] ata1.00: error: { UNC } [ 337.338980] ata1.00: configured for UDMA/133 [ 337.339061] ata1: EH complete [ 339.605454] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 339.605471] ata1.00: BMDMA stat 0x24 [ 339.605486] ata1.00: failed command: READ DMA EXT [ 339.605515] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 339.605522] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 339.605536] ata1.00: status: { DRDY ERR } [ 339.605547] ata1.00: error: { UNC } [ 339.715969] ata1.00: configured for UDMA/133 [ 339.716056] ata1: EH complete [ 341.982059] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 341.982076] ata1.00: BMDMA stat 0x24 [ 341.982091] ata1.00: failed command: READ DMA EXT [ 341.982120] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 341.982126] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 341.982141] ata1.00: status: { DRDY ERR } [ 341.982152] ata1.00: error: { UNC } [ 342.091984] ata1.00: configured for UDMA/133 [ 342.092065] ata1: EH complete [ 344.391723] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 344.391740] ata1.00: BMDMA stat 0x24 [ 344.391755] ata1.00: failed command: READ DMA EXT [ 344.391784] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 344.391790] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 344.391805] ata1.00: status: { DRDY ERR } [ 344.391816] ata1.00: error: { UNC } [ 344.490916] ata1.00: configured for UDMA/133 [ 344.490960] ata1: EH complete [ 346.757267] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 346.757284] ata1.00: BMDMA stat 0x24 [ 346.757299] ata1.00: failed command: READ DMA EXT [ 346.757328] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 346.757334] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 346.757349] ata1.00: status: { DRDY ERR } [ 346.757360] ata1.00: error: { UNC } [ 346.867981] ata1.00: configured for UDMA/133 [ 346.868061] ata1: EH complete [ 349.133696] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 349.133713] ata1.00: BMDMA stat 0x24 [ 349.133728] ata1.00: failed command: READ DMA EXT [ 349.133757] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 349.133763] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 349.133778] ata1.00: status: { DRDY ERR } [ 349.133789] ata1.00: error: { UNC } [ 349.232981] ata1.00: configured for UDMA/133 [ 349.233068] sd 0:0:0:0: [sda] Unhandled sense code [ 349.233080] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 349.233095] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 349.233115] Descriptor sense data with sense descriptors (in hex): [ 349.233125] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 349.233171] 12 a1 9e af [ 349.233189] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 349.233211] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 349.233247] end_request: I/O error, dev sda, sector 312581807 [ 349.233258] Buffer I/O error on device sda, logical block 39072725 [ 349.233307] ata1: EH complete [ 351.521337] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 351.521354] ata1.00: BMDMA stat 0x24 [ 351.521370] ata1.00: failed command: READ DMA EXT [ 351.521398] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 351.521405] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 351.521420] ata1.00: status: { DRDY ERR } [ 351.521431] ata1.00: error: { UNC } [ 351.631979] ata1.00: configured for UDMA/133 [ 351.632061] ata1: EH complete [ 353.942249] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 353.942266] ata1.00: BMDMA stat 0x24 [ 353.942281] ata1.00: failed command: READ DMA EXT [ 353.942310] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 353.942316] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 353.942331] ata1.00: status: { DRDY ERR } [ 353.942342] ata1.00: error: { UNC } [ 354.041108] ata1.00: configured for UDMA/133 [ 354.041156] ata1: EH complete [ 356.318732] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 356.318749] ata1.00: BMDMA stat 0x24 [ 356.318764] ata1.00: failed command: READ DMA EXT [ 356.318793] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 356.318799] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 356.318814] ata1.00: status: { DRDY ERR } [ 356.318825] ata1.00: error: { UNC } [ 356.429059] ata1.00: configured for UDMA/133 [ 356.429106] ata1: EH complete [ 358.695233] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 358.695251] ata1.00: BMDMA stat 0x24 [ 358.695266] ata1.00: failed command: READ DMA EXT [ 358.695295] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 358.695301] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 358.695316] ata1.00: status: { DRDY ERR } [ 358.695327] ata1.00: error: { UNC } [ 358.794084] ata1.00: configured for UDMA/133 [ 358.794132] ata1: EH complete [ 361.105053] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 361.105071] ata1.00: BMDMA stat 0x24 [ 361.105086] ata1.00: failed command: READ DMA EXT [ 361.105114] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 361.105121] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 361.105135] ata1.00: status: { DRDY ERR } [ 361.105147] ata1.00: error: { UNC } [ 361.214988] ata1.00: configured for UDMA/133 [ 361.215070] ata1: EH complete [ 363.492729] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 363.492747] ata1.00: BMDMA stat 0x24 [ 363.492762] ata1.00: failed command: READ DMA EXT [ 363.492790] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 363.492797] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 363.492811] ata1.00: status: { DRDY ERR } [ 363.492822] ata1.00: error: { UNC } [ 363.603001] ata1.00: configured for UDMA/133 [ 363.603086] sd 0:0:0:0: [sda] Unhandled sense code [ 363.603098] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 363.603113] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 363.603133] Descriptor sense data with sense descriptors (in hex): [ 363.603143] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 363.603189] 12 a1 9e af [ 363.603207] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 363.603229] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 363.603264] end_request: I/O error, dev sda, sector 312581807 [ 363.603276] Buffer I/O error on device sda, logical block 39072725 [ 363.603338] ata1: EH complete [ 365.880312] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 365.880330] ata1.00: BMDMA stat 0x24 [ 365.880345] ata1.00: failed command: READ DMA EXT [ 365.880374] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 365.880380] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 365.880395] ata1.00: status: { DRDY ERR } [ 365.880406] ata1.00: error: { UNC } [ 366.018967] ata1.00: configured for UDMA/133 [ 366.019053] ata1: EH complete [ 368.301202] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 368.301219] ata1.00: BMDMA stat 0x24 [ 368.301234] ata1.00: failed command: READ DMA EXT [ 368.301263] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 368.301269] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 368.301284] ata1.00: status: { DRDY ERR } [ 368.301295] ata1.00: error: { UNC } [ 368.450989] ata1.00: configured for UDMA/133 [ 368.451071] ata1: EH complete [ 370.766551] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 370.766569] ata1.00: BMDMA stat 0x24 [ 370.766584] ata1.00: failed command: READ DMA EXT [ 370.766612] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 370.766619] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 370.766633] ata1.00: status: { DRDY ERR } [ 370.766644] ata1.00: error: { UNC } [ 370.866088] ata1.00: configured for UDMA/133 [ 370.866138] ata1: EH complete [ 373.143097] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 373.143115] ata1.00: BMDMA stat 0x24 [ 373.143129] ata1.00: failed command: READ DMA EXT [ 373.143158] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 373.143165] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 373.143179] ata1.00: status: { DRDY ERR } [ 373.143190] ata1.00: error: { UNC } [ 373.253149] ata1.00: configured for UDMA/133 [ 373.253197] ata1: EH complete [ 375.530652] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 375.530670] ata1.00: BMDMA stat 0x24 [ 375.530685] ata1.00: failed command: READ DMA EXT [ 375.530714] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 375.530720] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 375.530735] ata1.00: status: { DRDY ERR } [ 375.530746] ata1.00: error: { UNC } [ 375.630135] ata1.00: configured for UDMA/133 [ 375.630182] ata1: EH complete [ 377.907113] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 377.907131] ata1.00: BMDMA stat 0x24 [ 377.907146] ata1.00: failed command: READ DMA EXT [ 377.907175] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 377.907181] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 377.907196] ata1.00: status: { DRDY ERR } [ 377.907207] ata1.00: error: { UNC } [ 378.017150] ata1.00: configured for UDMA/133 [ 378.017203] sd 0:0:0:0: [sda] Unhandled sense code [ 378.017215] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 378.017230] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 378.017250] Descriptor sense data with sense descriptors (in hex): [ 378.017260] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 378.017305] 12 a1 9e af [ 378.017324] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 378.017345] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 378.017384] end_request: I/O error, dev sda, sector 312581807 [ 378.017403] Buffer I/O error on device sda, logical block 39072725 [ 378.017477] ata1: EH complete [ 380.305879] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 380.305897] ata1.00: BMDMA stat 0x24 [ 380.305912] ata1.00: failed command: READ DMA EXT [ 380.305941] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 380.305948] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 380.305962] ata1.00: status: { DRDY ERR } [ 380.305973] ata1.00: error: { UNC } [ 380.415983] ata1.00: configured for UDMA/133 [ 380.416064] ata1: EH complete [ 382.704584] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 382.704602] ata1.00: BMDMA stat 0x24 [ 382.704617] ata1.00: failed command: READ DMA EXT [ 382.704645] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 382.704652] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 382.704666] ata1.00: status: { DRDY ERR } [ 382.704677] ata1.00: error: { UNC } [ 382.804138] ata1.00: configured for UDMA/133 [ 382.804187] ata1: EH complete [ 385.092234] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 385.092251] ata1.00: BMDMA stat 0x24 [ 385.092266] ata1.00: failed command: READ DMA EXT [ 385.092294] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 385.092301] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 385.092315] ata1.00: status: { DRDY ERR } [ 385.092326] ata1.00: error: { UNC } [ 385.202088] ata1.00: configured for UDMA/133 [ 385.202137] ata1: EH complete [ 387.490850] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 387.490867] ata1.00: BMDMA stat 0x24 [ 387.490882] ata1.00: failed command: READ DMA EXT [ 387.490911] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 387.490917] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 387.490932] ata1.00: status: { DRDY ERR } [ 387.490943] ata1.00: error: { UNC } [ 387.589974] ata1.00: configured for UDMA/133 [ 387.590058] ata1: EH complete [ 389.856332] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 389.856349] ata1.00: BMDMA stat 0x24 [ 389.856364] ata1.00: failed command: READ DMA EXT [ 389.856392] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 389.856399] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 389.856413] ata1.00: status: { DRDY ERR } [ 389.856424] ata1.00: error: { UNC } [ 389.966114] ata1.00: configured for UDMA/133 [ 389.966162] ata1: EH complete [ 392.266079] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 392.266097] ata1.00: BMDMA stat 0x24 [ 392.266112] ata1.00: failed command: READ DMA EXT [ 392.266140] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 392.266147] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 392.266162] ata1.00: status: { DRDY ERR } [ 392.266173] ata1.00: error: { UNC } [ 392.375922] ata1.00: configured for UDMA/133 [ 392.375972] sd 0:0:0:0: [sda] Unhandled sense code [ 392.375984] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 392.375999] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 392.376058] Descriptor sense data with sense descriptors (in hex): [ 392.376069] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 392.376114] 12 a1 9e af [ 392.376133] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 392.376165] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 392.376187] end_request: I/O error, dev sda, sector 312581807 [ 392.376198] Buffer I/O error on device sda, logical block 39072725 [ 392.376262] ata1: EH complete [ 394.709301] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 394.709319] ata1.00: BMDMA stat 0x24 [ 394.709335] ata1.00: failed command: READ DMA EXT [ 394.709364] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 394.709370] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 394.709385] ata1.00: status: { DRDY ERR } [ 394.709396] ata1.00: error: { UNC } [ 394.807918] ata1.00: configured for UDMA/133 [ 394.807964] ata1: EH complete [ 397.074606] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 397.074624] ata1.00: BMDMA stat 0x24 [ 397.074639] ata1.00: failed command: READ DMA EXT [ 397.074668] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 397.074674] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 397.074689] ata1.00: status: { DRDY ERR } [ 397.074699] ata1.00: error: { UNC } [ 397.184902] ata1.00: configured for UDMA/133 [ 397.184948] ata1: EH complete [ 399.473411] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 399.473428] ata1.00: BMDMA stat 0x24 [ 399.473443] ata1.00: failed command: READ DMA EXT [ 399.473472] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 399.473479] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 399.473493] ata1.00: status: { DRDY ERR } [ 399.473504] ata1.00: error: { UNC } [ 399.573085] ata1.00: configured for UDMA/133 [ 399.573134] ata1: EH complete [ 401.849898] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 401.849916] ata1.00: BMDMA stat 0x24 [ 401.849930] ata1.00: failed command: READ DMA EXT [ 401.849959] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 401.849966] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 401.849980] ata1.00: status: { DRDY ERR } [ 401.849991] ata1.00: error: { UNC } [ 401.960260] ata1.00: configured for UDMA/133 [ 401.960310] ata1: EH complete [ 404.248530] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 404.248547] ata1.00: BMDMA stat 0x24 [ 404.248562] ata1.00: failed command: READ DMA EXT [ 404.248591] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 404.248597] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 404.248612] ata1.00: status: { DRDY ERR } [ 404.248623] ata1.00: error: { UNC } [ 404.347996] ata1.00: configured for UDMA/133 [ 404.348082] ata1: EH complete [ 406.647246] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 406.647264] ata1.00: BMDMA stat 0x24 [ 406.647278] ata1.00: failed command: READ DMA EXT [ 406.647307] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 406.647314] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 406.647328] ata1.00: status: { DRDY ERR } [ 406.647339] ata1.00: error: { UNC } [ 406.757959] ata1.00: configured for UDMA/133 [ 406.758046] sd 0:0:0:0: [sda] Unhandled sense code [ 406.758058] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 406.758073] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 406.758093] Descriptor sense data with sense descriptors (in hex): [ 406.758104] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 406.758149] 12 a1 9e af [ 406.758168] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 406.758189] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 406.758224] end_request: I/O error, dev sda, sector 312581807 [ 406.758236] Buffer I/O error on device sda, logical block 39072725 [ 406.758300] ata1: EH complete [ 409.034895] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 409.034913] ata1.00: BMDMA stat 0x24 [ 409.034928] ata1.00: failed command: READ DMA EXT [ 409.034956] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 409.034963] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 409.034977] ata1.00: status: { DRDY ERR } [ 409.034988] ata1.00: error: { UNC } [ 409.145059] ata1.00: configured for UDMA/133 [ 409.145107] ata1: EH complete [ 411.422556] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 411.422574] ata1.00: BMDMA stat 0x24 [ 411.422589] ata1.00: failed command: READ DMA EXT [ 411.422618] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 411.422624] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 411.422639] ata1.00: status: { DRDY ERR } [ 411.422650] ata1.00: error: { UNC } [ 411.521990] ata1.00: configured for UDMA/133 [ 411.522080] ata1: EH complete [ 413.799064] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 413.799081] ata1.00: BMDMA stat 0x24 [ 413.799096] ata1.00: failed command: READ DMA EXT [ 413.799125] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 413.799131] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 413.799146] ata1.00: status: { DRDY ERR } [ 413.799157] ata1.00: error: { UNC } [ 413.908984] ata1.00: configured for UDMA/133 [ 413.909066] ata1: EH complete [ 416.186619] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 416.186637] ata1.00: BMDMA stat 0x24 [ 416.186652] ata1.00: failed command: READ DMA EXT [ 416.186681] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 416.186687] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 416.186702] ata1.00: status: { DRDY ERR } [ 416.186713] ata1.00: error: { UNC } [ 416.285984] ata1.00: configured for UDMA/133 [ 416.286066] ata1: EH complete [ 418.596415] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 418.596432] ata1.00: BMDMA stat 0x24 [ 418.596447] ata1.00: failed command: READ DMA EXT [ 418.596476] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 418.596483] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 418.596497] ata1.00: status: { DRDY ERR } [ 418.596508] ata1.00: error: { UNC } [ 418.706986] ata1.00: configured for UDMA/133 [ 418.707066] ata1: EH complete [ 420.972965] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 420.972983] ata1.00: BMDMA stat 0x24 [ 420.972997] ata1.00: failed command: READ DMA EXT [ 420.973062] ata1.00: cmd 25/00:08:a8:9e:a1/00:00:12:00:00/e0 tag 0 dma 4096 in [ 420.973069] res 51/40:00:af:9e:a1/40:00:12:00:00/00 Emask 0x9 (media error) [ 420.973084] ata1.00: status: { DRDY ERR } [ 420.973095] ata1.00: error: { UNC } [ 421.082962] ata1.00: configured for UDMA/133 [ 421.083050] sd 0:0:0:0: [sda] Unhandled sense code [ 421.083062] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 421.083077] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 421.083097] Descriptor sense data with sense descriptors (in hex): [ 421.083108] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 421.083153] 12 a1 9e af [ 421.083171] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 421.083204] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 a1 9e a8 00 00 08 00 [ 421.083226] end_request: I/O error, dev sda, sector 312581807 [ 421.083237] Buffer I/O error on device sda, logical block 39072725 [ 421.083287] ata1: EH complete [ 422.420083] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 423.280339] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 423.287251] SELinux: initialized (dev sda2, type ext4), uses xattr [ 423.384374] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 423.384400] SELinux: initialized (dev dm-2, type ext4), uses xattr [ 425.636310] Adding 2031612k swap on /dev/mapper/vg_fedora-lv_swap. Priority:-1 extents:1 across:2031612k [ 425.644344] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts [ 426.141323] readahead-disable-service: delaying service auditd [ 427.820911] NET: Registered protocol family 10 [ 427.821945] lo: Disabled Privacy Extensions [ 427.841118] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 432.098484] ATL1E 0000:03:00.0: irq 44 for MSI/MSI-X [ 432.099238] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 432.127863] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 450.280326] type=1305 audit(1302462626.304:25801): auid=4294967295 ses=4294967295 subj=system_u:system_r:readahead_t:s0 op="remove rule" key=(null) list=4 res=1 [ 450.280343] type=1305 audit(1302462626.304:25802): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:readahead_t:s0 res=1 [ 450.290497] type=1300 audit(1302462626.303:25800): arch=40000003 syscall=5 success=yes exit=15 a0=bf82bdfc a1=88000 a2=1b6 a3=11b046 items=1 ppid=1 pid=1569 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="upowerd" exe="/usr/libexec/upowerd" subj=system_u:system_r:devicekit_power_t:s0-s0:c0.c1023 key=(null) [ 450.290535] type=1307 audit(1302462626.303:25800): cwd="/" [ 450.290562] type=1302 audit(1302462626.303:25800): item=0 name="/sys/devices/virtual/tty/tty16/uevent" inode=2931 dev=00:0f mode=0100644 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:sysfs_t:s0 [ 454.165462] readahead-collector: starting delayed service auditd [ 454.578510] readahead-collector: sorting [ 454.789783] readahead-collector: finished [ 702.719303] fuse init (API version 7.14) [ 702.791936] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts [ 702.816487] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts [ 881.903011] wlan0: deauthenticating from 00:1a:2b:68:59:53 by local choice (reason=3) [ 882.101859] wlan0: authenticate with 00:1a:2b:68:59:53 (try 1) [ 882.103324] wlan0: authenticated [ 882.103372] wlan0: associate with 00:1a:2b:68:59:53 (try 1) [ 882.105465] wlan0: RX AssocResp from 00:1a:2b:68:59:53 (capab=0x411 status=0 aid=3) [ 882.105480] wlan0: associated [ 882.108233] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 892.355036] wlan0: no IPv6 routers present
- Bonjour,
J'ai un problème de lenteur de démarrage, allant de 6 à 7 min de boot, avec des messages redondants. La première chose dont je suis sur, c'est que ça concerne le disque dur, mais quoi exactement, je n'en sais rien. J'ai déjà effectué plusieurs recherches sans avoir trouvé de problèmes similaires.
J'ai également un "boot message" lorsque j'arrive enfin à accéder à mon compte :[root@fedora ~]# fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x3cfa46bc Device Boot Start End Blocks Id System /dev/sda1 63 173694779 86847358+ 7 HPFS/NTFS /dev/sda2 * 173694976 174718975 512000 83 Linux /dev/sda3 174718976 312580095 68930560 8e Linux LVM Disk /dev/dm-0: 34.7 GB, 34695282688 bytes 255 heads, 63 sectors/track, 4218 cylinders, total 67764224 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-0 doesn't contain a valid partition table Disk /dev/dm-1: 2080 MB, 2080374784 bytes 255 heads, 63 sectors/track, 252 cylinders, total 4063232 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-1 doesn't contain a valid partition table Disk /dev/dm-2: 33.8 GB, 33789313024 bytes 255 heads, 63 sectors/track, 4107 cylinders, total 65994752 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-2 doesn't contain a valid partition table
Et voilà ce que j'ai au démarrage, en passant par "echap" :Welcome to Fedora Starting udev: [ OK ] Setting hostname fedora: [ OK ] ERROR: asr: reading /dev/sda[Input/output error] ERROR: ddf1: reading /dev/sda[Input/output error] ERROR: isw: reading /dev/sda[Input/output error] ERROR: jmicron: reading /dev/sda[Input/output error] ERROR: lsi: reading /dev/sda[Input/output error] ERROR: nvidia: reading /dev/sda[Input/output error] ERROR: sil: reading /dev/sda[Input/output error] ERROR: via: reading /dev/sda[Input/output error] Setting up Logical Volume Management: 3 logical volume(s) in volume group "vg_fedora" now active [ OK ] Checking filesystems _Fedora-14-i686-: clean, 86929/2121728 files, 1008124/8470528 blocks /dev/sda2: clean, 43/128016 files, 64213/512000 blocks /dev/mapper/vg_fedora-lv_home: clean, 964/2064384 files, 1268797/8249344 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] mount: according to mtab, /dev/mapper/vg_fedora-lv_root is already mounted on / Mounting local filesystems: mount: sysfs already mounted or /sys busy mount: according to mtab, /sys is already mounted on /sys [FAILED] Enabling /etc/fstab swaps: [ OK ] Entering non-interactive startup Starting monitoring for VG vg_fedora: 3 logical volume(s) in volume group "vg_fedora" monitored [ OK ] ip6tables: Applying firewall rules: [ OK ] iptables: Applying firewall rules: [ OK ] Starting auditd: [ OK ] Starting portreserve: [ OK ] Starting system logger: [ OK ] Enabling ondemand cpu frequency scaling: [ OK ] Starting irqbalance: [ OK ] Starting mdmonitor: [ OK ] Starting system message bus: [ OK ] Setting network parameters... [ OK ] Starting NetworkManager daemon: [ OK ] Starting Avahi daemon... [ OK ] Starting cups: [ OK ] Mounting other filesystems: mount: sysfs already mounted or /sys busy mount: according to mtab, /sys is already mounted on /sys [FAILED] Starting HAL daemon: [ OK ] Retrigger failed udev events [ OK ] Enabling Bluetooth devices: Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting abrt daemon: [ OK ] Starting crond: [ OK ] Enabling monthly Smolt checkin: [ OK ] Starting atd: [ OK ] [ OK ]
Etant donné que le partitionnement manuel me prenait trop de temps à cause de ce problème (oui, je devais attendre 6 à 7 min à chaque nouvelle analyse de la table de partition), j'ai opté pour une partition automatique sur une partition linux existante.
Avez vous une idée de ce que ça peut être et comment je pourrais éventuellement régler cela ?
Merci d'avance.
PS : Je n'ai pas un niveau très avancé en bidouille, veuillez me pardonner. - Modifié
Bonsoir !
Mtax, j'aimerai te demander quelque chose, est il possible d'avoir une résolution du type 1920x1080 voir même plus gros ? Si oui comment ?
Parce que j'ai eu beau modifier l'échelle avec the gimp, rien n'a fonctionné ! (désolé je n'y connais pas grand chose avec the gimp et si je peux en apprendre plus 😃)
Faut il le mettre en .svg ?
Sinon Le fond d'écran est vraiment génial, j'adore 😃- Dans Votre bureau
- Modifié
Oui j'ai eu un grand coup de coeur pour la police moi aussi 8-)
Sinon je suis toujours dans la sobriété 😉
Je viens de le réajuster avec un petit tint
D'ailleurs, je me pose une question, à part openBox, est ce qu'il est possible d'avoir un menu sur le clicgauchedroit dans Gnome ? (je suppose que non, mais bon je demande toujours ...) - Dans Votre bureau
- Modifié
Bon, c'est à n'y rien comprendre. J'ai passé l'après midi à me coltiner ce problème et il est maintenant résolu.
Alors je ne sais pas trop, je suis allé bidouiller deux/trois trucs.
Primo j'ai viré hplip et l'ai réinstallé, cependant pas en "automatic" mais en "custom". J'ai choisi les services qui allaient me servir ou non.
Puis dans "/etc/cups/printers.conf" j'ai remplacé
Filter application/vnd.cups-postscript 100 foomatic-rip-hplip
Filter application/vnd.cups-pdf 0 foomatic-rip-hplip
par
Filter application/vnd.cups-postscript 100 foomatic-rip
Filter application/vnd.cups-pdf 0 foomatic-rip
car j'ai constaté que dans /usr/lib/cups/filter on avait un lien symbolique vers foomatic-rip dans /usr/bin, mais pas de foomatic-rip-hplip.
J'ai relancé cups
Redémarré, lancé Applications > Accessoires > HP Device Manager et cliqué sur 'Refresh'.su -c "/etc/init.d/cups restart"
J'ai tout de suite lancé une impression, et là ça a marché.
Bon ne me demandez pas si tout ce que j'ai fais est certifié, j'ai essayé divers trucs et ça a marché. Le fait est là. En espérant que ça en aidera d'autres au cas où ...
EDIT : Je n'arrive pas à mettre le post en [Résolu] ... Un modérateur peut il le faire ?- Dans Votre bureau
- Modifié
Dans le titre, HP DeskJet F2480- Parce que la 3.9.8 ne reconnait pas mon imprimante. C'est seulement depuis la 3.9.10