processus Kworker innombrable

Ddjodj · 14 juin 2023

en tout cas la commande

kill -9 $(ps -A | grep kworker | awk '{print $1}' )

même en su n’a aucun effet dessus

Nicosss · 14 juin 2023

djodj Tu peux nous fournir un retour de commande pour voir ce qui est tant sollicité.
Bien penser à utiliser les balises Markdown pour le bloc code -> Voir FAQ .

nouvo09 · 14 juin 2023

que renvoie cette commande:

$ ps aux | grep kworker | wc

Ddjodj · 15 juin 2023

nouvo09

voici le retour de commande

$ ps aux | grep kworker | wc

356 3918 31345

quant à la commande

ps -A | grep kworker | awk '{print $1}'

elle retourne une liste énorme de pid, plusieurs centaines, ça part de 7 jusqu’à 3211 juste apres avoir botté puis s’être loger, c’est incroyable

VINDICATORs · 15 juin 2023

Tu as des logs d’erreurs? Fait un état de la machine? Mémoire? Rapport smartd des unités de stockage? Des détails sur le matériel/pilotes utilisé? Un café l’addition?

Voir booter sur un ancien noyau?

Ce genre de comportement est anormal, mais pas sans raison venue de nul part…

Et pour les logs rien que le retour de :

journalctl -p 3 -xb

Serait utile…

Voir aussi un simple “top” (voir htop)?

Ddjodj · 15 juin 2023

VINDICATORs

voici ce que j’ai juste aprés avoir redémarré ma machine

# journalctl -p 3 -xb
juin 15 14:00:15 usrDatas kernel: __common_interrupt: 1.55 No irq handler for vector
juin 15 14:00:15 usrDatas kernel: __common_interrupt: 2.55 No irq handler for vector
juin 15 14:00:15 usrDatas kernel: __common_interrupt: 3.55 No irq handler for vector
juin 15 14:00:15 usrDatas kernel: __common_interrupt: 4.55 No irq handler for vector
juin 15 14:00:15 usrDatas kernel: __common_interrupt: 5.55 No irq handler for vector
juin 15 14:00:15 usrDatas kernel: __common_interrupt: 6.55 No irq handler for vector
juin 15 14:00:15 usrDatas kernel: __common_interrupt: 7.55 No irq handler for vector
juin 15 14:00:15 usrDatas kernel: __common_interrupt: 8.55 No irq handler for vector
juin 15 14:00:15 usrDatas kernel: __common_interrupt: 9.55 No irq handler for vector
juin 15 14:00:15 usrDatas kernel: __common_interrupt: 10.55 No irq handler for vector
juin 15 14:00:15 usrDatas systemd[1]: bpf-lsm: Failed to load BPF object: No such process
juin 15 14:00:18 usrDatas systemd[1]: bpf-lsm: Failed to load BPF object: No such process
juin 15 14:00:19 usrDatas kernel: kvm_amd: SVM disabled (by BIOS) in MSR_VM_CR on CPU 6
juin 15 14:00:19 usrDatas (udev-worker)[775]: event14: Failed to call EVIOCSKEYCODE with scan code 0x7c, and key code 190: Invalid argument
juin 15 14:00:21 usrDatas abrtd[1009]: '/var/spool/abrt/ccpp-2022-12-16-16:41:05.291664-1804' is not a problem directory
juin 15 14:00:21 usrDatas abrtd[1009]: '/var/spool/abrt/oops-2022-06-28-10:42:30-1247-2' is not a problem directory
juin 15 14:00:21 usrDatas abrtd[1009]: '/var/spool/abrt/oops-2022-06-26-12:44:28-973-1' is not a problem directory
juin 15 14:00:22 usrDatas abrtd[1009]: '/var/spool/abrt/oops-2022-06-28-10:42:30-1247-3' is not a problem directory
juin 15 14:00:22 usrDatas abrtd[1009]: '/var/spool/abrt/oops-2022-06-28-10:42:30-1247-0' is not a problem directory
juin 15 14:00:23 usrDatas abrtd[1009]: '/var/spool/abrt/oops-2022-06-28-10:42:30-1247-1' is not a problem directory
juin 15 14:00:23 usrDatas abrtd[1009]: '/var/spool/abrt/oops-2022-06-28-10:42:30-1247-4' is not a problem directory
juin 15 14:00:24 usrDatas abrtd[1009]: '/var/spool/abrt/oops-2022-10-13-20:00:45-1217-1' is not a problem directory
juin 15 14:00:24 usrDatas abrtd[1009]: '/var/spool/abrt/oops-2022-06-26-12:44:28-973-0' is not a problem directory
juin 15 14:00:25 usrDatas abrtd[1009]: '/var/spool/abrt/oops-2022-10-13-20:00:45-1217-0' is not a problem directory
juin 15 14:00:32 usrvDatas dbus-broker-launch[1216]: Ignoring duplicate name 'org.freedesktop.FileManager1' in service file '/usr/share//dbu>
░░ Subject: Invalid service file
░░ Defined-By: dbus-broker
░░ Support: https://groups.google.com/forum/#!forum/bus1-devel

et pour ce qui concerne les processus vci juste un tot petit extrait de ps -A

4529 ?        00:00:00 kworker/1:4H-ttm
4530 ?        00:00:00 kworker/1:5H-ttm
4531 ?        00:00:00 kworker/1:6H-ttm
4532 ?        00:00:00 kworker/1:7H-ttm
4533 ?        00:00:00 kworker/1:8H-ttm
4534 ?        00:00:00 kworker/9:0H-ttm
4535 ?        00:00:00 kworker/1:9H-ttm
4536 ?        00:00:00 kworker/1:10H-ttm
4537 ?        00:00:00 kworker/1:11H-ttm
4538 ?        00:00:00 kworker/9:2H-ttm
4539 ?        00:00:00 kworker/1:12H-ttm
4540 ?        00:00:00 kworker/1:13H-ttm
4541 ?        00:00:00 kworker/1:15H-ttm
4542 ?        00:00:00 kworker/1:16H
4543 ?        00:00:00 kworker/9:3H-ttm
4544 ?        00:00:00 kworker/9:4H-ttm
4545 ?        00:00:00 kworker/9:5H-ttm
4546 ?        00:00:00 kworker/9:6H-ttm
4547 ?        00:00:00 kworker/9:8H-ttm
4548 ?        00:00:00 kworker/9:9H-ttm
4549 ?        00:00:00 kworker/9:10H-ttm
4550 ?        00:00:00 kworker/9:11H-ttm

ça ne me parle pas autrement que de me dire que ce ne dot pas être normal

Édit xylphute: ajout de balises markdown

VINDICATORs · 15 juin 2023

Je pense voir le souci.

C’est une très vielle installation?

Si tu peux repart sur les réglages par défaut côté BIOS.

La ligne avec le event 14 me semble être la cause. Je regarderais plus en détail quand je serais sur mon ordi.

VINDICATORs · 15 juin 2023

Que retourne :

sudo cat /proc/bus/input/devices

Ddjodj · 16 juin 2023

bonjour,

très vieille? un peu, pas plus que çà non pus, elle doit avoir deux ans voire trois et mise à niveau cette année

voici le retour de la commande

# sudo cat /proc/bus/input/devices
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
U: Uniq=
H: Handlers=kbd event0 
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
U: Uniq=
H: Handlers=kbd event1 
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input2
U: Uniq=
H: Handlers=sysrq kbd leds event2 
B: PROP=0
B: EV=120013
B: KEY=2000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0003 Vendor=046d Product=c05a Version=0111
N: Name="Logitech USB Optical Mouse"
P: Phys=usb-0000:09:00.3-3/input0
S: Sysfs=/devices/pci0000:00/0000:00:08.1/0000:09:00.3/usb3/3-3/3-3:1.0/0003:046D:C05A.0001/input/input3
U: Uniq=
H: Handlers=mouse0 event3 
B: PROP=0
B: EV=17
B: KEY=70000 0 0 0 0
B: REL=903
B: MSC=10
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input4
U: Uniq=
H: Handlers=kbd event4 
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Eee PC WMI hotkeys"
P: Phys=eeepc-wmi/input0
S: Sysfs=/devices/platform/eeepc-wmi/input/input5
U: Uniq=
H: Handlers=kbd event5 rfkill 
B: PROP=0
B: EV=100013
B: KEY=7e00000 0 800000000000 0 0 1400b00100000 8300180001100800 e000000000000 2
B: MSC=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA NVidia HDMI/DP,pcm=3"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input6
U: Uniq=
H: Handlers=event6 
B: PROP=0
B: EV=21
B: SW=140
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA NVidia HDMI/DP,pcm=7"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input7
U: Uniq=
H: Handlers=event7 
B: PROP=0
B: EV=21
B: SW=140
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA NVidia HDMI/DP,pcm=8"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input8
U: Uniq=
H: Handlers=event8 
B: PROP=0
B: EV=21
B: SW=140
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA NVidia HDMI/DP,pcm=9"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input9
U: Uniq=
H: Handlers=event9 
B: PROP=0
B: EV=21
B: SW=140
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HD-Audio Generic Front Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:08.1/0000:09:00.4/sound/card1/input10
U: Uniq=
H: Handlers=event10 
B: PROP=0
B: EV=21
B: SW=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HD-Audio Generic Rear Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:08.1/0000:09:00.4/sound/card1/input11
U: Uniq=
H: Handlers=event11 
B: PROP=0
B: EV=21
B: SW=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HD-Audio Generic Line"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:08.1/0000:09:00.4/sound/card1/input12
U: Uniq=
H: Handlers=event12 
B: PROP=0
B: EV=21
B: SW=2000
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HD-Audio Generic Line Out"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:08.1/0000:09:00.4/sound/card1/input13
U: Uniq=
H: Handlers=event13 
B: PROP=0
B: EV=21
B: SW=40
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HD-Audio Generic Front Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:08.1/0000:09:00.4/sound/card1/input14
U: Uniq=
H: Handlers=event14 
B: PROP=0
B: EV=21
B: SW=4

si ça te parle c’est super.; moi ça ne me parle pas

merci

Edit Nicosss : Correction des balises Markdown -> Voir FAQ

VINDICATORs · 16 juin 2023

Déjà fait une mise a jour du BIOS si tu peux.

Après il semble que tu ais un problèmes avec le panneau audio avant.

Desactive la carte son intégré dans le BIOS pour voir.

(Voir manuel de la carte maman ou de la machine dont j’ai pas le descriptif en tête)

Après as tu fais de modif dans le BIOS ou non?

Et encore que retourne “top”?

Que tu ais 3000 kworker soit. Mais est ce que tu as des soucis de performance ? De saturation système ? On en sait rien…

Ddjodj · 16 juin 2023

je ne me souviens plus mais je sais que j’ai augmenté la vitesse de ventilos car ma machine semble mal refroidir (machine “custum” achetée sur le net.. je ne referai plus : quand ça merde c’est galère, je retourne au commerces de proximité pour ce genre de produit)

dès que je peux je regarde pour faire la mise à jour du bios

Ddjodj · 16 juin 2023

djodj je vient de rebooter apres avoir desactiver le controleur de son intégré, je n’ai plsu de son mais jai toujors autant de kworker au démmarage

voila le rtoue de la comamnde cat /proc/bus/input/devices

# cat /proc/bus/input/devices
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
U: Uniq=
H: Handlers=kbd event0 
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
U: Uniq=
H: Handlers=kbd event1 
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input2
U: Uniq=
H: Handlers=sysrq kbd leds event2 
B: PROP=0
B: EV=120013
B: KEY=2000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0003 Vendor=046d Product=c05a Version=0111
N: Name="Logitech USB Optical Mouse"
P: Phys=usb-0000:09:00.3-3/input0
S: Sysfs=/devices/pci0000:00/0000:00:08.1/0000:09:00.3/usb3/3-3/3-3:1.0/0003:046D:C05A.0001/input/input3
U: Uniq=
H: Handlers=mouse0 event3 
B: PROP=0
B: EV=17
B: KEY=70000 0 0 0 0
B: REL=903
B: MSC=10
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input4
U: Uniq=
H: Handlers=kbd event4 
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Eee PC WMI hotkeys"
P: Phys=eeepc-wmi/input0
S: Sysfs=/devices/platform/eeepc-wmi/input/input5
U: Uniq=
H: Handlers=kbd event5 rfkill 
B: PROP=0
B: EV=100013
B: KEY=7e00000 0 800000000000 0 0 1400b00100000 8300180001100800 e000000000000 2
B: MSC=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA NVidia HDMI/DP,pcm=3"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input6
U: Uniq=
H: Handlers=event6 
B: PROP=0
B: EV=21
B: SW=140
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA NVidia HDMI/DP,pcm=7"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input7
U: Uniq=
H: Handlers=event7 
B: PROP=0
B: EV=21
B: SW=140
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA NVidia HDMI/DP,pcm=8"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input8
U: Uniq=
H: Handlers=event8 
B: PROP=0
B: EV=21
B: SW=140
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA NVidia HDMI/DP,pcm=9"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input9
U: Uniq=
H: Handlers=event9 
B: PROP=0
B: EV=21
B: SW=140

ça ne me parle toujours spas

Edit Nicosss : Correction des balises Markdown -> Voir FAQ

Nicosss · 16 juin 2023

djodj Merci d’utiliser les balises Markdown adaptées pour les blocs code -> Voir FAQ.

Je vais corriger les précédentes mais merci de faire attention.

VINDICATORs · 16 juin 2023

Et encore une fois…

Que retourne la commande"top", est ce que ta machine sature?

Et tu aurais son descriptif

VINDICATORs · 19 juin 2023

Des nouvelles?

VINDICATORs · 20 juin 2023

Bouton “+” -> “inserer un bloc de citation” stp!

Que retourne la commande “TOP”?

Vérifie les températures de la machine, voir pense à faire un tour dans le BIOS voir si tu n’as pas un mauvais réglage.

Il faudrait voir ce que retourne le rapport SMARTD avec la commande “smartctl” (cherche on en parle pas mal sur le forum) pour l’état des unités de stockage (si ta du seagate barracuda t’étonne pas!). Voir faire un test mémoire.

Merci de nous donner le descriptif de la machine si ce n’est pas déjà fait.

Ddjodj · 20 juin 2023

VINDICATORs

j’ai du me tormper j’ai fait une réponse mais qui est partie dans des “échanges privés” j’ai pas compris,

bref pour répondre sur le forum :

oui sur mes deux disques j’ai en seagate baracuda, cela pose un problème? il serai ta l’origine de mes arrets intempestifs ou alors de la multitude de kworker ??

voici la synthèse faite par GSmartControl

smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.3.7-100.fc37.x86_64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate BarraCuda 3.5 (SMR)
Device Model:     ST2000DM008-2FR102
Serial Number:    WFL45NVA
LU WWN Device Id: 5 000c50 0d044afd2
Firmware Version: 0001
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
TRIM Command:     Available
Device is:        In smartctl database 7.3/5319
ATA Version is:   ACS-3 T13/2161-D revision 5
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Tue Jun 20 19:55:43 2023 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is:     128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, frozen [SEC2]

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x73) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 200) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x30a5)	SCT Status supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   082   064   006    -    155301548
  3 Spin_Up_Time            PO----   099   098   000    -    0
  4 Start_Stop_Count        -O--CK   099   099   020    -    1218
  5 Reallocated_Sector_Ct   PO--CK   100   100   010    -    0
  7 Seek_Error_Rate         POSR--   093   060   045    -    1807539519
  9 Power_On_Hours          -O--CK   081   081   000    -    16827h+26m+13.533s
 10 Spin_Retry_Count        PO--C-   100   100   097    -    0
 12 Power_Cycle_Count       -O--CK   099   099   020    -    1218
183 Runtime_Bad_Block       -O--CK   100   100   000    -    0
184 End-to-End_Error        -O--CK   100   100   099    -    0
187 Reported_Uncorrect      -O--CK   100   100   000    -    0
188 Command_Timeout         -O--CK   100   099   000    -    0 0 1
189 High_Fly_Writes         -O-RCK   100   100   000    -    0
190 Airflow_Temperature_Cel -O---K   063   058   040    -    37 (Min/Max 34/39)
191 G-Sense_Error_Rate      -O--CK   100   100   000    -    0
192 Power-Off_Retract_Count -O--CK   100   100   000    -    832
193 Load_Cycle_Count        -O--CK   068   068   000    -    65072
194 Temperature_Celsius     -O---K   037   042   000    -    37 (0 14 0 0 0)
195 Hardware_ECC_Recovered  -O-RC-   082   064   000    -    155301548
197 Current_Pending_Sector  -O--C-   100   100   000    -    0
198 Offline_Uncorrectable   ----C-   100   100   000    -    0
199 UDMA_CRC_Error_Count    -OSRCK   200   200   000    -    0
240 Head_Flying_Hours       ------   100   253   000    -    15238h+55m+03.921s
241 Total_LBAs_Written      ------   100   253   000    -    14576104120
242 Total_LBAs_Read         ------   100   253   000    -    2254382580
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      5  Ext. Comprehensive SMART error log
0x04       GPL,SL  R/O      8  Device Statistics log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x0c       GPL     R/O   2048  Pending Defects log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x24       GPL     R/O    512  Current Device Internal Status Data log
0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa1       GPL,SL  VS      24  Device vendor specific log
0xa2       GPL     VS    8160  Device vendor specific log
0xa6       GPL     VS     192  Device vendor specific log
0xa8-0xa9  GPL,SL  VS     136  Device vendor specific log
0xab       GPL     VS       1  Device vendor specific log
0xb0       GPL     VS    9048  Device vendor specific log
0xbd       GPL     VS       8  Device vendor specific log
0xbe-0xbf  GPL     VS   65535  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL,SL  VS      16  Device vendor specific log
0xc3       GPL,SL  VS       8  Device vendor specific log
0xc4       GPL,SL  VS      24  Device vendor specific log
0xd1       GPL     VS     264  Device vendor specific log
0xd3       GPL     VS    1920  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%         0         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       522 (0x020a)
Device State:                        Active (0)
Current Temperature:                    37 Celsius
Power Cycle Min/Max Temperature:     34/39 Celsius
Lifetime    Min/Max Temperature:     14/42 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         3 minutes
Temperature Logging Interval:        59 minutes
Min/Max recommended Temperature:     14/55 Celsius
Min/Max Temperature Limit:           10/60 Celsius
Temperature History Size (Index):    128 (79)

Index    Estimated Time   Temperature Celsius
  80    2023-06-15 14:14    34  ***************
  81    2023-06-15 15:13    34  ***************
  82    2023-06-15 16:12    36  *****************
  83    2023-06-15 17:11    36  *****************
  84    2023-06-15 18:10     ?  -
  85    2023-06-15 19:09    36  *****************
  86    2023-06-15 20:08    36  *****************
  87    2023-06-15 21:07    37  ******************
  88    2023-06-15 22:06    36  *****************
  89    2023-06-15 23:05    36  *****************
  90    2023-06-16 00:04    35  ****************
  91    2023-06-16 01:03    35  ****************
  92    2023-06-16 02:02    35  ****************
  93    2023-06-16 03:01    36  *****************
  94    2023-06-16 04:00    35  ****************
  95    2023-06-16 04:59    36  *****************
  96    2023-06-16 05:58     ?  -
  97    2023-06-16 06:57    25  ******
  98    2023-06-16 07:56    34  ***************
  99    2023-06-16 08:55    36  *****************
 100    2023-06-16 09:54    35  ****************
 101    2023-06-16 10:53    36  *****************
 102    2023-06-16 11:52    36  *****************
 103    2023-06-16 12:51    37  ******************
 104    2023-06-16 13:50    36  *****************
 105    2023-06-16 14:49    37  ******************
 106    2023-06-16 15:48    36  *****************
 107    2023-06-16 16:47    34  ***************
 108    2023-06-16 17:46    34  ***************
 109    2023-06-16 18:45    34  ***************
 110    2023-06-16 19:44     ?  -
 111    2023-06-16 20:43    24  *****
 112    2023-06-16 21:42    34  ***************
 113    2023-06-16 22:41    34  ***************
 114    2023-06-16 23:40    34  ***************
 115    2023-06-17 00:39     ?  -
 116    2023-06-17 01:38    34  ***************
 117    2023-06-17 02:37     ?  -
 118    2023-06-17 03:36    34  ***************
 119    2023-06-17 04:35    33  **************
 120    2023-06-17 05:34    35  ****************
 121    2023-06-17 06:33    36  *****************
 122    2023-06-17 07:32    34  ***************
 123    2023-06-17 08:31    35  ****************
 124    2023-06-17 09:30    37  ******************
 125    2023-06-17 10:29    38  *******************
 126    2023-06-17 11:28     ?  -
 127    2023-06-17 12:27    37  ******************
   0    2023-06-17 13:26     ?  -
   1    2023-06-17 14:25    25  ******
   2    2023-06-17 15:24    34  ***************
   3    2023-06-17 16:23    35  ****************
   4    2023-06-17 17:22    34  ***************
   5    2023-06-17 18:21    35  ****************
   6    2023-06-17 19:20    36  *****************
   7    2023-06-17 20:19    37  ******************
   8    2023-06-17 21:18    36  *****************
   9    2023-06-17 22:17    34  ***************
  10    2023-06-17 23:16    36  *****************
  11    2023-06-18 00:15    34  ***************
  12    2023-06-18 01:14    33  **************
  13    2023-06-18 02:13    35  ****************
  14    2023-06-18 03:12    36  *****************
  15    2023-06-18 04:11    37  ******************
  16    2023-06-18 05:10     ?  -
  17    2023-06-18 06:09    27  ********
  18    2023-06-18 07:08     ?  -
  19    2023-06-18 08:07    38  *******************
  20    2023-06-18 09:06     ?  -
  21    2023-06-18 10:05    38  *******************
  22    2023-06-18 11:04     ?  -
  23    2023-06-18 12:03    38  *******************
  24    2023-06-18 13:02     ?  -
  25    2023-06-18 14:01    38  *******************
  26    2023-06-18 15:00     ?  -
  27    2023-06-18 15:59    26  *******
  28    2023-06-18 16:58    36  *****************
  29    2023-06-18 17:57    36  *****************
  30    2023-06-18 18:56    37  ******************
  31    2023-06-18 19:55    35  ****************
  32    2023-06-18 20:54    34  ***************
  33    2023-06-18 21:53    35  ****************
  34    2023-06-18 22:52    37  ******************
  35    2023-06-18 23:51    37  ******************
  36    2023-06-19 00:50    38  *******************
  37    2023-06-19 01:49    37  ******************
  38    2023-06-19 02:48    38  *******************
  39    2023-06-19 03:47    37  ******************
  40    2023-06-19 04:46    36  *****************
  41    2023-06-19 05:45    36  *****************
  42    2023-06-19 06:44    36  *****************
  43    2023-06-19 07:43     ?  -
  44    2023-06-19 08:42    26  *******
  45    2023-06-19 09:41    37  ******************
  46    2023-06-19 10:40     ?  -
  47    2023-06-19 11:39    35  ****************
  48    2023-06-19 12:38     ?  -
  49    2023-06-19 13:37    34  ***************
  50    2023-06-19 14:36    36  *****************
  51    2023-06-19 15:35    35  ****************
  52    2023-06-19 16:34    36  *****************
  53    2023-06-19 17:33    35  ****************
  54    2023-06-19 18:32    35  ****************
  55    2023-06-19 19:31    36  *****************
  56    2023-06-19 20:30    36  *****************
  57    2023-06-19 21:29    35  ****************
  58    2023-06-19 22:28    38  *******************
  59    2023-06-19 23:27    39  ********************
  60    2023-06-20 00:26    39  ********************
  61    2023-06-20 01:25    37  ******************
  62    2023-06-20 02:24    37  ******************
  63    2023-06-20 03:23     ?  -
  64    2023-06-20 04:22    26  *******
  65    2023-06-20 05:21     ?  -
  66    2023-06-20 06:20    29  **********
  67    2023-06-20 07:19    36  *****************
  68    2023-06-20 08:18    38  *******************
 ...    ..(  2 skipped).    ..  *******************
  71    2023-06-20 11:15    38  *******************
  72    2023-06-20 12:14    37  ******************
  73    2023-06-20 13:13    38  *******************
  74    2023-06-20 14:12     ?  -
  75    2023-06-20 15:11    37  ******************
  76    2023-06-20 16:10    39  ********************
  77    2023-06-20 17:09    36  *****************
  78    2023-06-20 18:08    34  ***************
  79    2023-06-20 19:07    37  ******************

SCT Error Recovery Control command not supported

Device Statistics (GP Log 0x04)
Page  Offset Size        Value Flags Description
0x01  =====  =               =  ===  == General Statistics (rev 1) ==
0x01  0x008  4            1218  ---  Lifetime Power-On Resets
0x01  0x010  4           16827  ---  Power-on Hours
0x01  0x018  6     14578240280  ---  Logical Sectors Written
0x01  0x020  6       228601493  ---  Number of Write Commands
0x01  0x028  6      2235987954  ---  Logical Sectors Read
0x01  0x030  6        39499354  ---  Number of Read Commands
0x01  0x038  6               -  ---  Date and Time TimeStamp
0x03  =====  =               =  ===  == Rotating Media Statistics (rev 1) ==
0x03  0x008  4           16303  ---  Spindle Motor Power-on Hours
0x03  0x010  4           15214  ---  Head Flying Hours
0x03  0x018  4           65072  ---  Head Load Events
0x03  0x020  4               0  ---  Number of Reallocated Logical Sectors
0x03  0x028  4               0  ---  Read Recovery Attempts
0x03  0x030  4               8  ---  Number of Mechanical Start Failures
0x03  0x038  4               0  ---  Number of Realloc. Candidate Logical Sectors
0x03  0x040  4             832  ---  Number of High Priority Unload Events
0x04  =====  =               =  ===  == General Errors Statistics (rev 1) ==
0x04  0x008  4              14  ---  Number of Reported Uncorrectable Errors
0x04  0x010  4               1  ---  Resets Between Cmd Acceptance and Completion
0x05  =====  =               =  ===  == Temperature Statistics (rev 1) ==
0x05  0x008  1              37  ---  Current Temperature
0x05  0x010  1              36  ---  Average Short Term Temperature
0x05  0x018  1              33  ---  Average Long Term Temperature
0x05  0x020  1              42  ---  Highest Temperature
0x05  0x028  1               0  ---  Lowest Temperature
0x05  0x030  1              40  ---  Highest Average Short Term Temperature
0x05  0x038  1              28  ---  Lowest Average Short Term Temperature
0x05  0x040  1              38  ---  Highest Average Long Term Temperature
0x05  0x048  1              30  ---  Lowest Average Long Term Temperature
0x05  0x050  4               0  ---  Time in Over-Temperature
0x05  0x058  1              60  ---  Specified Maximum Operating Temperature
0x05  0x060  4               0  ---  Time in Under-Temperature
0x05  0x068  1               0  ---  Specified Minimum Operating Temperature
0x06  =====  =               =  ===  == Transport Statistics (rev 1) ==
0x06  0x008  4            3105  ---  Number of Hardware Resets
0x06  0x010  4            1025  ---  Number of ASR Events
0x06  0x018  4               0  ---  Number of Interface CRC Errors
                                |||_ C monitored condition met
                                ||__ D supports DSN
                                |___ N normalized value

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x000a  2            3  Device-to-host register FISes sent due to a COMRESET
0x0001  2            0  Command failed due to ICRC error
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS

et dans l’onglet statistoc j’ai deux lignes en rose

"Description","Value","Flags","Page, Offset"
"    Number of Mechanical Start Failures","8","---","0x03, 0x030"😡
"    Number of Reallocation Candidate Logical Sectors","0","---","0x03, 0x038"
"    Number of High Priority Unload Events","832","---","0x03, 0x040"
"General Errors Statistics (rev 1)","","",""
"    Number of Reported Uncorrectable Errors","14","---","0x04, 0x008"😡

les autres lignes sont bonnes

dans l’onglet “attributes”

j’ai aussi quelques soucis apparament :

"ID","Name","Failed","Norm-ed value","Worst","Threshold","Raw value","Type","Flags"
1,"Raw Read Error Rate","never","82","64","6","155 301 548","<b>pre-failure</b>","POSR--"😡
3,"Spin-Up Time","never","99","98","0","0","<b>pre-failure</b>","PO----"😡
4,"Start / Stop Count","never","99","99","20","1 218","old age","-O--CK"
5,"Reallocated Sector Count","never","100","100","10","0","<b>pre-failure</b>","PO--CK"😡
7,"Seek Error Rate","never","93","60","45","1 807 539 519","<b>pre-failure</b>","POSR--"😡
9,"Power-On Time","never","81","81","0","16827h+26m+13.533s","old age","-O--CK"
10,"Spin-Up Retry Count","never","100","100","97","0","<b>pre-failure</b>","PO--C-"😡

tout le reste est bon

si ca vous parle j’en sus ravi, moi ça me laisse stoîque

de même dansles onglets Self-Tests , Error Log , Temperture Log et Avenced tout semble bon

j’ai fait un test memoire, tout est bon