oui ca m'intéresse aussi MarbolanGos ! car perso gnome3 plante sous VB avec les addons 4.0.8
cf le post : http://forums.fedora-fr.org/viewtopic.php?id=52465
cf le post : http://forums.fedora-fr.org/viewtopic.php?id=52465
Gnome 3 pour les riches ?
Moi sous gnome 3 j'ai le droit à des freezes très souvent... Et j'avais le même problème sous archlinux(donc ça vient pas de fedora);
Full GNOME 3 !didierg wrote:En mode full gnome 3 ou en mode restreint ?
J'ai fait en plus la feignasse !
* Installation des VBox additions (en gnome restreint) :
$ su -lc 'yum groupinstall "Development Tools"'Là il monte le CD et il me propose de démarrer l'autorun. J'accepte et je tape le mot de passe root. Il installe.
* J'éteins la machine virtuelle
* Dans les settings de la machine je vais dans Display je coche Enable 3D acceleration et je lui mets 64 MB de mémoire vidéo (il demande un peu moins mais j'ai pris large).
* Je fais OK et je relance la machine virtuelle
* Toujours en mode restreint je vais dans System Settings -> System Info -> Graphics -> je fais glisser deux fois le curseur pour qu'il affiche qu'il va revérifier au prochain lancement (The next login will attempt to use the standard experience.)
* Je relance la VM
Oui aussi ....il faudrait peut etre que je l'installe en dur plus tard pour l'essayer dans de bonne condition...mais j'ai du mal à me défaire de la rapidité d'Xfce 😉Madko wrote:CabSud a écrit :
Je l'ai trouvé lent et lourd peut être que c'est du a sa relative jeunesse et que des mise a jour l'amélioreront certainement ..
Peut être que c'est du au liveCD... Perso je trouve Gnome3 plus réactif, comme quoi (mais pas en liveCD, en vraie installation).
Pourrais-tu poster ton /etc/X11/xorg.conf et ton /var/log/Xorg.0.log ?MarbolanGos wrote:Full GNOME 3 !didierg wrote:En mode full gnome 3 ou en mode restreint ?
$ cat /etc/X11/xorg.conf
# VirtualBox generated configuration file
# based on /etc/X11/xorg.conf.
Section "Monitor"
Identifier "Monitor[0]"
ModelName "VirtualBox Virtual Output"
VendorName "Oracle Corporation"
EndSection
Section "Device"
BoardName "VirtualBox Graphics"
Driver "vboxvideo"
Identifier "Device[0]"
VendorName "Oracle Corporation"
EndSection
Section "Screen"
SubSection "Display"
Depth 24
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
[ 11.061]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 11.061] X Protocol Version 11, Revision 0
[ 11.061] Build Operating System: x86-10 2.6.32-71.14.1.el6.x86_64
[ 11.061] Current Operating System: Linux localhost.localdomain 2.6.38.6-27.fc15.i686 #1 SMP Sun May 15 17:57:13 UTC 2011 i686
[ 11.064] Kernel command line: ro root=/dev/mapper/VolGroup-lv_root rd_LVM_LV=VolGroup/lv_root rd_LVM_LV=VolGroup/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=fr rhgb quiet
[ 11.064] Build Date: 28 April 2011 03:50:16AM
[ 11.064] Build ID: xorg-x11-server 1.10.1-14.fc15
[ 11.064] Current version of pixman: 0.20.2
[ 11.064] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.064] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.065] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 26 14:20:58 2011
[ 11.066] (==) Using config file: "/etc/X11/xorg.conf"
[ 11.066] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 11.066] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 11.070] (==) No Layout section. Using the first Screen section.
[ 11.070] (**) |-->Screen "Screen[0]" (0)
[ 11.070] (**) | |-->Monitor "Monitor[0]"
[ 11.070] (**) | |-->Device "Device[0]"
[ 11.070] (==) Automatically adding devices
[ 11.070] (==) Automatically enabling devices
[ 11.071] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 11.071] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 11.071] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 11.071] (II) Loader magic: 0x8229940
[ 11.071] (II) Module ABI versions:
[ 11.071] X.Org ANSI C Emulation: 0.4
[ 11.071] X.Org Video Driver: 10.0
[ 11.071] X.Org XInput driver : 12.2
[ 11.071] X.Org Server Extension : 5.0
[ 11.073] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/67108864, BIOS @ 0x????????/131072
[ 11.073] (II) LoadModule: "extmod"
[ 11.076] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 11.077] (II) Module extmod: vendor="X.Org Foundation"
[ 11.077] compiled for 1.10.1, module version = 1.0.0
[ 11.077] Module class: X.Org Server Extension
[ 11.077] ABI class: X.Org Server Extension, version 5.0
[ 11.077] (II) Loading extension SELinux
[ 11.077] (II) Loading extension MIT-SCREEN-SAVER
[ 11.077] (II) Loading extension XFree86-VidModeExtension
[ 11.077] (II) Loading extension XFree86-DGA
[ 11.077] (II) Loading extension DPMS
[ 11.077] (II) Loading extension XVideo
[ 11.077] (II) Loading extension XVideo-MotionCompensation
[ 11.077] (II) Loading extension X-Resource
[ 11.077] (II) LoadModule: "dbe"
[ 11.077] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 11.078] (II) Module dbe: vendor="X.Org Foundation"
[ 11.078] compiled for 1.10.1, module version = 1.0.0
[ 11.078] Module class: X.Org Server Extension
[ 11.078] ABI class: X.Org Server Extension, version 5.0
[ 11.078] (II) Loading extension DOUBLE-BUFFER
[ 11.078] (II) LoadModule: "glx"
[ 11.078] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 11.079] (II) Module glx: vendor="X.Org Foundation"
[ 11.079] compiled for 1.10.1, module version = 1.0.0
[ 11.079] ABI class: X.Org Server Extension, version 5.0
[ 11.079] (==) AIGLX enabled
[ 11.079] (II) Loading extension GLX
[ 11.079] (II) LoadModule: "record"
[ 11.080] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 11.080] (II) Module record: vendor="X.Org Foundation"
[ 11.080] compiled for 1.10.1, module version = 1.13.0
[ 11.080] Module class: X.Org Server Extension
[ 11.080] ABI class: X.Org Server Extension, version 5.0
[ 11.080] (II) Loading extension RECORD
[ 11.080] (II) LoadModule: "dri"
[ 11.080] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 11.081] (II) Module dri: vendor="X.Org Foundation"
[ 11.081] compiled for 1.10.1, module version = 1.0.0
[ 11.081] ABI class: X.Org Server Extension, version 5.0
[ 11.081] (II) Loading extension XFree86-DRI
[ 11.081] (II) LoadModule: "dri2"
[ 11.081] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 11.082] (II) Module dri2: vendor="X.Org Foundation"
[ 11.082] compiled for 1.10.1, module version = 1.2.0
[ 11.082] ABI class: X.Org Server Extension, version 5.0
[ 11.082] (II) Loading extension DRI2
[ 11.082] (II) LoadModule: "vboxvideo"
[ 11.083] (II) Loading /usr/lib/xorg/modules/drivers/vboxvideo_drv.so
[ 11.084] (II) Module vboxvideo: vendor="Oracle Corporation"
[ 11.084] compiled for 1.5.99.901, module version = 1.0.1
[ 11.084] Module class: X.Org Video Driver
[ 11.084] ABI class: X.Org Video Driver, version 10.0
[ 11.084] (**) Load address of symbol "VBOXVIDEO" is 0x2f2860
[ 11.084] (II) VBoxVideo: guest driver for VirtualBox: vbox
[ 11.084] (++) using VT number 1
[ 11.092] (II) Loading /usr/lib/xorg/modules/drivers/vboxvideo_drv.so
[ 11.092] (II) VBoxVideo(0): VirtualBox guest additions video driver version 4.0.8
[ 11.092] (II) Loading sub module "ramdac"
[ 11.092] (II) LoadModule: "ramdac"
[ 11.092] (II) Module "ramdac" already built-in
[ 11.092] (II) Loading sub module "vbe"
[ 11.092] (II) LoadModule: "vbe"
[ 11.092] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 11.093] (II) Module vbe: vendor="X.Org Foundation"
[ 11.093] compiled for 1.10.1, module version = 1.1.0
[ 11.093] ABI class: X.Org Video Driver, version 10.0
[ 11.093] (II) Loading sub module "fb"
[ 11.093] (II) LoadModule: "fb"
[ 11.093] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 11.094] (II) Module fb: vendor="X.Org Foundation"
[ 11.094] compiled for 1.10.1, module version = 1.0.0
[ 11.094] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.094] (II) Loading sub module "shadowfb"
[ 11.094] (II) LoadModule: "shadowfb"
[ 11.094] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 11.094] (II) Module shadowfb: vendor="X.Org Foundation"
[ 11.095] compiled for 1.10.1, module version = 1.0.0
[ 11.095] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.095] (II) Loading sub module "vgahw"
[ 11.095] (II) LoadModule: "vgahw"
[ 11.095] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 11.095] (II) Module vgahw: vendor="X.Org Foundation"
[ 11.095] compiled for 1.10.1, module version = 0.1.0
[ 11.095] ABI class: X.Org Video Driver, version 10.0
[ 11.095] (II) Loading sub module "dri"
[ 11.095] (II) LoadModule: "dri"
[ 11.095] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 11.095] (II) Module dri: vendor="X.Org Foundation"
[ 11.095] compiled for 1.10.1, module version = 1.0.0
[ 11.096] ABI class: X.Org Server Extension, version 5.0
[ 11.096] (==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32
[ 11.096] (--) VBoxVideo(0): Virtual size is 32000x32000 (pitch 32000)
[ 11.096] (**) VBoxVideo(0): Built-in mode "VBoxInitialMode": 107.8 MHz (scaled from 0.0 MHz), 56.0 kHz, 60.0 Hz
[ 11.096] (II) VBoxVideo(0): Modeline "VBoxInitialMode"x0.0 107.82 1920 1922 1924 1926 927 929 931 933 (56.0 kHz)
[ 11.097] (**) VBoxVideo(0): Built-in mode "VBoxDynamicMode": 107.8 MHz (scaled from 0.0 MHz), 56.0 kHz, 60.0 Hz
[ 11.097] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0 107.82 1920 1922 1924 1926 927 929 931 933 (56.0 kHz)
[ 11.097] (**) VBoxVideo(0): Built-in mode "VBoxDynamicMode": 107.8 MHz (scaled from 0.0 MHz), 56.0 kHz, 60.0 Hz
[ 11.097] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0 107.82 1920 1922 1924 1926 927 929 931 933 (56.0 kHz)
[ 11.097] (**) VBoxVideo(0): Built-in mode "VBox-1024x768": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
[ 11.097] (II) VBoxVideo(0): Modeline "VBox-1024x768"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz)
[ 11.097] (**) VBoxVideo(0): Built-in mode "VBox-800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
[ 11.097] (II) VBoxVideo(0): Modeline "VBox-800x600"x0.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz)
[ 11.097] (**) VBoxVideo(0): Built-in mode "VBox-640x480": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz
[ 11.097] (II) VBoxVideo(0): Modeline "VBox-640x480"x0.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz)
[ 11.097] (==) VBoxVideo(0): RGB weight 888
[ 11.097] (==) VBoxVideo(0): Default visual is TrueColor
[ 11.097] (==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0)
[ 11.097] (==) VBoxVideo(0): DPI set to (96, 96)
[ 11.097] (--) Depth 24 pixmap format is 32 bpp
[ 11.097] (II) Loading sub module "int10"
[ 11.098] (II) LoadModule: "int10"
[ 11.098] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 11.098] (II) Module int10: vendor="X.Org Foundation"
[ 11.098] compiled for 1.10.1, module version = 1.0.0
[ 11.098] ABI class: X.Org Video Driver, version 10.0
[ 11.098] (II) VBoxVideo(0): initializing int10
[ 11.099] (II) VBoxVideo(0): Primary V_BIOS segment is: 0xc000
[ 11.101] (II) VBoxVideo(0): VESA BIOS detected
[ 11.101] (II) VBoxVideo(0): VESA VBE Version 2.0
[ 11.101] (II) VBoxVideo(0): VESA VBE Total Mem: 65536 kB
[ 11.101] (II) VBoxVideo(0): VESA VBE OEM: VirtualBox VBE BIOS http://www.virtualbox.org/
[ 11.101] (II) VBoxVideo(0): VESA VBE OEM Software Rev: 0.2
[ 11.101] (II) VBoxVideo(0): VESA VBE OEM Vendor: Oracle Corporation
[ 11.101] (II) VBoxVideo(0): VESA VBE OEM Product: Oracle VM VirtualBox VBE Adapter
[ 11.101] (II) VBoxVideo(0): VESA VBE OEM Product Rev: Oracle VM VirtualBox Version 4.0.8
[ 11.545] (==) VBoxVideo(0): Default visual is TrueColor
[ 11.545] drmOpenDevice: node name is /dev/dri/card0
[ 11.550] drmOpenDevice: node name is /dev/dri/card0
[ 11.626] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 11.626] drmOpenDevice: node name is /dev/dri/card0
[ 11.626] drmOpenDevice: open result is 11, (OK)
[ 11.626] drmOpenByBusid: drmOpenMinor returns 11
[ 11.626] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 11.626] (II) [drm] loaded kernel module for "vboxvideo" driver.
[ 11.626] (II) [drm] DRM interface version 1.4
[ 11.626] (II) [drm] DRM open master succeeded.
[ 11.626] (II) VBoxVideo(0): [drm] Using the DRM lock SAREA also for drawables.
[ 11.626] (II) VBoxVideo(0): [drm] framebuffer handle = 0xe0000000
[ 11.626] (II) VBoxVideo(0): [drm] added 1 reserved context for kernel
[ 11.626] (II) VBoxVideo(0): X context handle = 0x1
[ 11.626] (II) VBoxVideo(0): [drm] installed DRM signal handler
[ 11.626] (II) VBoxVideo(0): visual configurations initialized
[ 11.628] (==) VBoxVideo(0): Backing store disabled
[ 11.628] (II) VBoxVideo(0): Requested monitor count: 1
[ 11.630] (II) VBoxVideo(0): Output VBOX0 using monitor section Monitor[0]
[ 11.630] (II) VBoxVideo(0): Output VBOX0 has no monitor section
[ 11.632] (II) VBoxVideo(0): EDID for output VBOX0
[ 11.632] (II) VBoxVideo(0): Manufacturer: VBX Model: 0 Serial#: 60753792
[ 11.632] (II) VBoxVideo(0): Year: 1990 Week: 1
[ 11.632] (II) VBoxVideo(0): EDID Version: 1.3
[ 11.632] (II) VBoxVideo(0): Digital Display Input
[ 11.632] (II) VBoxVideo(0): Indeterminate output size
[ 11.632] (II) VBoxVideo(0): Gamma: 2.20
[ 11.632] (II) VBoxVideo(0): DPMS capabilities: StandBy Suspend Off
[ 11.632] (II) VBoxVideo(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 11.632] (II) VBoxVideo(0): Default color space is primary color space
[ 11.632] (II) VBoxVideo(0): First detailed timing is preferred mode
[ 11.632] (II) VBoxVideo(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 11.632] (II) VBoxVideo(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 11.632] (II) VBoxVideo(0): Manufacturer's mask: 0
[ 11.632] (II) VBoxVideo(0): Supported detailed timing:
[ 11.632] (II) VBoxVideo(0): clock: 107.8 MHz Image Size: 0 x 0 mm
[ 11.632] (II) VBoxVideo(0): h_active: 1920 h_sync: 1922 h_sync_end 1924 h_blank_end 1926 h_border: 0
[ 11.632] (II) VBoxVideo(0): v_active: 927 v_sync: 929 v_sync_end 931 v_blanking: 933 v_border: 0
[ 11.632] (II) VBoxVideo(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz
[ 11.632] (II) VBoxVideo(0): Monitor name: VBOX monitor
[ 11.632] (II) VBoxVideo(0): EDID (in hex):
[ 11.632] (II) VBoxVideo(0): 00ffffffffffff005858000080079f03
[ 11.632] (II) VBoxVideo(0): 0100010380000078eeee91a3544c9926
[ 11.632] (II) VBoxVideo(0): 0f505400000001010101010101010101
[ 11.632] (II) VBoxVideo(0): 0101010101011d2a8006709f06300202
[ 11.632] (II) VBoxVideo(0): 2200000000000000000000fd0000c800
[ 11.632] (II) VBoxVideo(0): c864000a202020202020000000fc0056
[ 11.632] (II) VBoxVideo(0): 424f58206d6f6e69746f720a00000010
[ 11.632] (II) VBoxVideo(0): 000a2020202020202020202020200004
[ 11.632] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 11.632] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x927 Warning: We only handle separate sync.
[ 11.632] (II) VBoxVideo(0): Using hsync ranges from config file
[ 11.632] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 11.632] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 11.632] (II) VBoxVideo(0): Modeline "1920x927"x0.0 107.81 1920 1922 1924 1926 927 929 931 933 -hsync -vsync (56.0 kHz)
[ 11.633] (II) VBoxVideo(0): Printing probed modes for output VBOX0
[ 11.633] (II) VBoxVideo(0): Modeline "1920x927"x60.0 107.82 1920 1922 1924 1926 927 929 931 933 (56.0 kHz)
[ 11.633] (II) VBoxVideo(0): Modeline "1024x768"x60.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz)
[ 11.633] (II) VBoxVideo(0): Modeline "800x600"x60.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz)
[ 11.633] (II) VBoxVideo(0): Modeline "640x480"x60.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz)
[ 11.633] (II) VBoxVideo(0): Output VBOX0 connected
[ 11.633] (II) VBoxVideo(0): Using exact sizes for initial modes
[ 11.633] (II) VBoxVideo(0): Output VBOX0 using initial mode 1920x927 +0+0
[ 11.633] (II) VBoxVideo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 11.633] (II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 11.634] (==) VBoxVideo(0): DPMS enabled
[ 11.634] (II) VBoxVideo(0): [DRI] installation complete
[ 11.634] (--) RandR disabled
[ 11.634] (II) Initializing built-in extension Generic Event Extension
[ 11.634] (II) Initializing built-in extension SHAPE
[ 11.634] (II) Initializing built-in extension MIT-SHM
[ 11.634] (II) Initializing built-in extension XInputExtension
[ 11.635] (II) Initializing built-in extension XTEST
[ 11.635] (II) Initializing built-in extension BIG-REQUESTS
[ 11.635] (II) Initializing built-in extension SYNC
[ 11.635] (II) Initializing built-in extension XKEYBOARD
[ 11.635] (II) Initializing built-in extension XC-MISC
[ 11.635] (II) Initializing built-in extension XINERAMA
[ 11.635] (II) Initializing built-in extension XFIXES
[ 11.635] (II) Initializing built-in extension RENDER
[ 11.635] (II) Initializing built-in extension RANDR
[ 11.635] (II) Initializing built-in extension COMPOSITE
[ 11.635] (II) Initializing built-in extension DAMAGE
[ 11.641] (II) SELinux: Disabled by boolean
[ 11.653] (II) AIGLX: Screen 0 is not DRI2 capable
[ 11.653] drmOpenDevice: node name is /dev/dri/card0
[ 11.653] drmOpenDevice: open result is 12, (OK)
[ 11.653] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 11.653] drmOpenDevice: node name is /dev/dri/card0
[ 11.654] drmOpenDevice: open result is 12, (OK)
[ 11.654] drmOpenByBusid: drmOpenMinor returns 12
[ 11.654] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 11.654] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 11.659] (II) Next line is added to allow vboxvideo_drv.so to appear as whitelisted driver
[ 11.659] (II) The file referenced, is *NOT* loaded
[ 11.659] (II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
[ 11.659] (EE) AIGLX error: vboxvideo does not export required DRI extension
[ 11.659] (EE) AIGLX: reverting to software rendering
[ 11.704] (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
[ 11.704] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 11.705] (II) VBoxVideo(0): Setting screen physical size to 507 x 245
[ 11.849] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 11.849] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 11.849] (**) Power Button: Applying InputClass "system-setup-keyboard"
[ 11.849] (II) LoadModule: "evdev"
[ 11.850] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 11.850] (II) Module evdev: vendor="X.Org Foundation"
[ 11.850] compiled for 1.10.0, module version = 2.6.0
[ 11.850] Module class: X.Org XInput Driver
[ 11.850] ABI class: X.Org XInput driver, version 12.2
[ 11.850] (II) Using input driver 'evdev' for 'Power Button'
[ 11.850] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 11.850] (**) Power Button: always reports core events
[ 11.850] (**) Power Button: Device: "/dev/input/event0"
[ 11.851] (--) Power Button: Found keys
[ 11.851] (II) Power Button: Configuring as keyboard
[ 11.851] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0"
[ 11.851] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 11.852] (**) Option "xkb_rules" "evdev"
[ 11.852] (**) Option "xkb_model" "pc105"
[ 11.852] (**) Option "xkb_layout" "fr"
[ 11.852] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
[ 11.895] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 11.895] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 11.895] (**) Sleep Button: Applying InputClass "system-setup-keyboard"
[ 11.895] (II) Using input driver 'evdev' for 'Sleep Button'
[ 11.895] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 11.895] (**) Sleep Button: always reports core events
[ 11.895] (**) Sleep Button: Device: "/dev/input/event1"
[ 11.895] (--) Sleep Button: Found keys
[ 11.895] (II) Sleep Button: Configuring as keyboard
[ 11.895] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input1/event1"
[ 11.895] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 11.895] (**) Option "xkb_rules" "evdev"
[ 11.895] (**) Option "xkb_model" "pc105"
[ 11.895] (**) Option "xkb_layout" "fr"
[ 11.895] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
[ 11.902] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event4)
[ 11.902] (**) VirtualBox USB Tablet: Applying InputClass "evdev pointer catchall"
[ 11.902] (II) Using input driver 'evdev' for 'VirtualBox USB Tablet'
[ 11.902] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 11.902] (**) VirtualBox USB Tablet: always reports core events
[ 11.902] (**) VirtualBox USB Tablet: Device: "/dev/input/event4"
[ 11.902] (--) VirtualBox USB Tablet: Found 9 mouse buttons
[ 11.902] (--) VirtualBox USB Tablet: Found scroll wheel(s)
[ 11.902] (--) VirtualBox USB Tablet: Found relative axes
[ 11.902] (--) VirtualBox USB Tablet: Found absolute axes
[ 11.902] (--) VirtualBox USB Tablet: Found x and y absolute axes
[ 11.902] (II) VirtualBox USB Tablet: Configuring as mouse
[ 11.902] (II) VirtualBox USB Tablet: Adding scrollwheel support
[ 11.902] (**) VirtualBox USB Tablet: YAxisMapping: buttons 4 and 5
[ 11.902] (**) VirtualBox USB Tablet: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 11.903] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/input/input4/event4"
[ 11.903] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: MOUSE)
[ 11.903] (EE) VirtualBox USB Tablet: failed to initialize for relative axes.
[ 11.903] (II) VirtualBox USB Tablet: initialized for absolute axes.
[ 11.903] (**) VirtualBox USB Tablet: (accel) keeping acceleration scheme 1
[ 11.903] (**) VirtualBox USB Tablet: (accel) acceleration profile 0
[ 11.903] (**) VirtualBox USB Tablet: (accel) acceleration factor: 2.000
[ 11.903] (**) VirtualBox USB Tablet: (accel) acceleration threshold: 4
[ 11.903] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/js0)
[ 11.903] (II) No input driver/identifier specified (ignoring)
[ 11.904] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse1)
[ 11.904] (II) No input driver/identifier specified (ignoring)
[ 11.906] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 11.906] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 11.906] (**) AT Translated Set 2 keyboard: Applying InputClass "system-setup-keyboard"
[ 11.906] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 11.906] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 11.906] (**) AT Translated Set 2 keyboard: always reports core events
[ 11.906] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 11.906] (--) AT Translated Set 2 keyboard: Found keys
[ 11.906] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 11.906] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[ 11.906] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 11.906] (**) Option "xkb_rules" "evdev"
[ 11.906] (**) Option "xkb_model" "pc105"
[ 11.906] (**) Option "xkb_layout" "fr"
[ 11.906] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
[ 11.907] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event3)
[ 11.907] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[ 11.907] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
[ 11.907] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 11.907] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[ 11.907] (**) ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event3"
[ 11.907] (--) ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[ 11.907] (--) ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[ 11.907] (--) ImExPS/2 Generic Explorer Mouse: Found relative axes
[ 11.907] (--) ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[ 11.907] (II) ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[ 11.907] (II) ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
[ 11.908] (**) ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[ 11.908] (**) ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 11.908] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input3/event3"
[ 11.908] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE)
[ 11.908] (II) ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[ 11.909] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
[ 11.909] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
[ 11.909] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[ 11.909] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[ 11.909] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0)
[ 11.909] (II) No input driver/identifier specified (ignoring)
[ 11.918] (II) config/udev: Adding input device (unnamed) (/dev/vboxguest)
[ 11.918] (**) (unnamed): Applying InputClass "vboxmouse"
[ 11.918] (**) (unnamed): Applying InputClass "vboxmouse"
[ 11.918] (II) LoadModule: "vboxmouse"
[ 11.919] (II) Loading /usr/lib/xorg/modules/input/vboxmouse_drv.so
[ 11.920] (II) Module vboxmouse: vendor="Oracle Corporation"
[ 11.920] compiled for 0.0.0, module version = 1.0.0
[ 11.920] Module class: X.Org XInput Driver
[ 11.920] ABI class: X.Org XInput driver, version 12.2
[ 11.920] (**) Load address of symbol "VBOXMOUSE" is 0x6f1020
[ 11.920] (II) Using input driver 'vboxmouse' for '(unnamed)'
[ 11.920] (II) Loading /usr/lib/xorg/modules/input/vboxmouse_drv.so
[ 11.920] (**) (unnamed): always reports core events
[ 11.920] (**) (unnamed): Device: "/dev/vboxguest"
[ 11.920] (**) Option "config_info" "udev:/sys/devices/virtual/misc/vboxguest"
[ 11.920] (II) XINPUT: Adding extended input device "(unnamed)" (type: MOUSE)
[ 11.920] (**) (unnamed): (accel) keeping acceleration scheme 1
[ 11.920] (**) (unnamed): (accel) acceleration profile 0
[ 11.920] (**) (unnamed): (accel) acceleration factor: 2.000
[ 11.920] (**) (unnamed): (accel) acceleration threshold: 4
[ 11.920] (II) (unnamed): On.
[ 11.936] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 11.936] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x927 Warning: We only handle separate sync.
[ 11.936] (II) VBoxVideo(0): Using hsync ranges from config file
[ 11.936] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 11.936] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 11.936] (II) VBoxVideo(0): Modeline "1920x927"x0.0 107.81 1920 1922 1924 1926 927 929 931 933 -hsync -vsync (56.0 kHz)
[ 12.579] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 12.579] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x927 Warning: We only handle separate sync.
[ 12.579] (II) VBoxVideo(0): Using hsync ranges from config file
[ 12.579] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 12.579] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 12.579] (II) VBoxVideo(0): Modeline "1920x927"x0.0 107.81 1920 1922 1924 1926 927 929 931 933 -hsync -vsync (56.0 kHz)
[ 12.583] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 12.583] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x927 Warning: We only handle separate sync.
[ 12.583] (II) VBoxVideo(0): Using hsync ranges from config file
[ 12.583] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 12.583] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 12.583] (II) VBoxVideo(0): Modeline "1920x927"x0.0 107.81 1920 1922 1924 1926 927 929 931 933 -hsync -vsync (56.0 kHz)
[ 12.586] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 12.588] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x927 Warning: We only handle separate sync.
[ 12.588] (II) VBoxVideo(0): Using hsync ranges from config file
[ 12.588] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 12.588] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 12.588] (II) VBoxVideo(0): Modeline "1920x927"x0.0 107.81 1920 1922 1924 1926 927 929 931 933 -hsync -vsync (56.0 kHz)
[ 12.592] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 12.592] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x927 Warning: We only handle separate sync.
[ 12.592] (II) VBoxVideo(0): Using hsync ranges from config file
[ 12.592] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 12.592] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 12.592] (II) VBoxVideo(0): Modeline "1920x927"x0.0 107.81 1920 1922 1924 1926 927 929 931 933 -hsync -vsync (56.0 kHz)
[ 28.202] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 28.203] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x927 Warning: We only handle separate sync.
[ 28.203] (II) VBoxVideo(0): Using hsync ranges from config file
[ 28.203] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 28.203] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 28.203] (II) VBoxVideo(0): Modeline "1920x927"x0.0 107.81 1920 1922 1924 1926 927 929 931 933 -hsync -vsync (56.0 kHz)
[ 28.219] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 28.219] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x927 Warning: We only handle separate sync.
[ 28.219] (II) VBoxVideo(0): Using hsync ranges from config file
[ 28.219] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 28.219] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 28.219] (II) VBoxVideo(0): Modeline "1920x927"x0.0 107.81 1920 1922 1924 1926 927 929 931 933 -hsync -vsync (56.0 kHz)
[ 28.227] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 28.227] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x927 Warning: We only handle separate sync.
[ 28.227] (II) VBoxVideo(0): Using hsync ranges from config file
[ 28.227] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 28.227] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 28.227] (II) VBoxVideo(0): Modeline "1920x927"x0.0 107.81 1920 1922 1924 1926 927 929 931 933 -hsync -vsync (56.0 kHz)
[ 28.235] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 28.235] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x927 Warning: We only handle separate sync.
[ 28.235] (II) VBoxVideo(0): Using hsync ranges from config file
[ 28.235] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 28.235] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 28.235] (II) VBoxVideo(0): Modeline "1920x927"x0.0 107.81 1920 1922 1924 1926 927 929 931 933 -hsync -vsync (56.0 kHz)
[ 30.890] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 30.892] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x927 Warning: We only handle separate sync.
[ 30.892] (II) VBoxVideo(0): Using hsync ranges from config file
[ 30.892] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 30.893] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 30.894] (II) VBoxVideo(0): Modeline "1920x927"x0.0 107.81 1920 1922 1924 1926 927 929 931 933 -hsync -vsync (56.0 kHz)3 mois plus tard
Bonjour,
Je remonte le sujet car après avoir suivi les instructions de MarbolanGos je suis toujours en gnome restreint !
Alors je voulais savoir si d'autre que moi on le problème et s'ils l'ont résolu, de quel façon !
Merci d'avance
Je remonte le sujet car après avoir suivi les instructions de MarbolanGos je suis toujours en gnome restreint !
Alors je voulais savoir si d'autre que moi on le problème et s'ils l'ont résolu, de quel façon !
Merci d'avance
Utilises tu Virtual Box déja ? Si oui peux tu mettre ton xorg.conf.
je suis sous virtualbox 4.1.2 et le xorg.conf
# VirtualBox generated configuration file
# based on /etc/X11/xorg.conf.
Section "Monitor"
Identifier "Monitor[0]"
ModelName "VirtualBox Virtual Output"
VendorName "Oracle Corporation"
EndSection
Section "Device"
BoardName "VirtualBox Graphics"
Driver "vboxvideo"
Identifier "Device[0]"
VendorName "Oracle Corporation"
EndSection
Section "Screen"
SubSection "Display"
Depth 24
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
il faut installer les invités virtualbox pour qu'ils recompile le drivers video.
donc il te faudra aussi les outils de développement et le module kernel-devel ou kernel-PAE-devel pour que les invité s'installe corectement
donc il te faudra aussi les outils de développement et le module kernel-devel ou kernel-PAE-devel pour que les invité s'installe corectement
@penthium2, oui je sais, j'ai suivi la procédure suivante :
je ne comprend donc pas ce qui coince !!MarbolanGos wrote:Full GNOME 3 !didierg wrote:En mode full gnome 3 ou en mode restreint ?
J'ai fait en plus la feignasse !
* Installation des VBox additions (en gnome restreint) :Chargement du CD des additions : Devices -> Install Guest Additions$ su -lc 'yum groupinstall "Development Tools"'
Là il monte le CD et il me propose de démarrer l'autorun. J'accepte et je tape le mot de passe root. Il installe.
* J'éteins la machine virtuelle
* Dans les settings de la machine je vais dans Display je coche Enable 3D acceleration et je lui mets 64 MB de mémoire vidéo (il demande un peu moins mais j'ai pris large).
* Je fais OK et je relance la machine virtuelle
* Toujours en mode restreint je vais dans System Settings -> System Info -> Graphics -> je fais glisser deux fois le curseur pour qu'il affiche qu'il va revérifier au prochain lancement (The next login will attempt to use the standard experience.)
* Je relance la VM
Quelle version de Fedora lances-tu sous VirtualBox ?
J'ai installé dans VB la Fedora 15
as tu installé le kernel devel corespondant a ton kernel ??
car ils sont obligatoire pour bien compiler les invité !
tu peux noux mettre le retour de le commande d'installation des invité stp ?
car ils sont obligatoire pour bien compiler les invité !
tu peux noux mettre le retour de le commande d'installation des invité stp ?
je pense que tout est correct car l'installation des invités se passe bien :
Verifying archive integrity... All good.
Uncompressing VirtualBox 4.1.2 Guest Additions for Linux.........
VirtualBox Guest Additions installer
Removing installed version 4.1.2 of VirtualBox Guest Additions...
Removing existing VirtualBox DKMS kernel modules [ OK ]
Removing existing VirtualBox non-DKMS kernel modules [ OK ]
Building the VirtualBox Guest Additions kernel modules
Building the main Guest Additions module [ OK ]
Building the shared folder support module [ OK ]
Building the OpenGL support module [ OK ]
Doing non-kernel setup of the Guest Additions [ OK ]
You should restart your guest to make sure the new modules are actually used
Installing the Window System drivers
Installing X.Org Server 1.10 modules [ OK ]
Setting up the Window System to use the Guest Additions [ OK ]
You may need to restart the hal service and the Window System (or just restart
the guest system) to enable the Guest Additions.
Installing graphics libraries and desktop services componen[ OK ]
Press Return to close this window...
