Problème carte wifi BROADCOM Fedora 37

afl45 · 10/03/2023 22:56:15

Bonjour,
Je viens d'installer Fedora 37 sur mon Accer Aspire V15.
J'ai un problème concernant ma carte wifi Broadcom Inc. and subsidiaries BCM43228 802.11a/b/g/n qui est détecté mais ne fonctionne pas.
Avez-vous une solution pour résoudre mon problème ?
Cordialement

Nicosss · 11/03/2023 08:15:26

Que retourne

$ lspci -nnk | grep -iA3 "Network"
$ rfkill list
$ dmesg

Merci d'utiliser les balises code <> https://forums.fedora-fr.org/help.php#bbcode pour chaque retour de commande en précisant le prompt, la commande complète ainsi que le retour complet de celle-ci afin de faciliter la lecture.

afl45 · 11/03/2023 16:21:04

les deux premières commandes me retourne ceci:

[accer_alan_xmr@pc-131 ~]$ lspci -nnk | grep -iA3 "Network"
02:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries BCM43228 802.11a/b/g/n [14e4:4359]
	Subsystem: Foxconn International, Inc. Device [105b:e04b]
	Kernel driver in use: bcma-pci-bridge
	Kernel modules: bcma
[accer_alan_xmr@pc-131 ~]$ rfkill list
0: acer-wireless: Wireless LAN
	Soft blocked: no
	Hard blocked: no
1: acer-bluetooth: Bluetooth
	Soft blocked: no
	Hard blocked: no
3: hci0: Bluetooth
	Soft blocked: no
	Hard blocked: no

et la troisième commande me retourne plein de messages lié au noyau de mon système, et voilà les messages concernant ma carte wifi:

comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   18.349972] audit: type=1334 audit(1678480910.849:154): prog-id=57 op=LOAD
[   18.350249] audit: type=1334 audit(1678480910.849:155): prog-id=58 op=LOAD
[   18.368764] b43-phy0: Broadcom 43228 WLAN found (core revision 30)
[   18.369211] b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 16
[   18.369223] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2057, Revision 9, Version 1
[   18.369532] Broadcom 43xx driver loaded [ Features: PNLS ]
[   18.371252] b43 bcma0:1: Direct firmware load for b43/ucode30_mimo.fw failed with error -2
[   18.371318] b43 bcma0:1: Direct firmware load for b43/ucode30_mimo.fw failed with error -2
[   18.378256] b43 bcma0:1: Direct firmware load for b43-open/ucode30_mimo.fw failed with error -2
[   18.378301] b43 bcma0:1: Direct firmware load for b43-open/ucode30_mimo.fw failed with error -2
[   18.378306] b43-phy0 ERROR: Firmware file "b43/ucode30_mimo.fw" not found
[   18.378308] b43-phy0 ERROR: Firmware file "b43-open/ucode30_mimo.fw" not found
[   18.378310] b43-phy0 ERROR: You must go to https://wireless.wiki.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[   18.395853] Bluetooth: hci0: BCM: chip id 63
[   18.396855] Bluetooth: hci0: BCM: features 0x07
[   18.412859] Bluetooth: hci0: fedora
[   18.412864] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[   18.421747] Bluetooth: hci0: BCM: firmware Patch file not found, tried:
[   18.421752] Bluetooth: hci0: BCM: 'brcm/BCM20702A1-0489-e046.hcd'
[   18.421753] Bluetooth: hci0: BCM: 'brcm/BCM-0489-e046.hcd'
[   20.301125] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   20.301133] Bluetooth: BNEP filters: protocol multicast
[   20.301140] Bluetooth: BNEP socket layer initialized
[   20.306032] Bluetooth: MGMT ver 1.22
[   23.116886] NET: Registered PF_QIPCRTR protocol family
[   27.382425] Generic FE-GE Realtek PHY r8169-0-101:00: attached PHY driver (mii_bus:phy_addr=r8169-0-101:00, irq=MAC)
[   27.520497] r8169 0000:01:00.1 enp1s0f1: Link is Down
[   30.392901] r8169 0000:01:00.1 enp1s0f1: Link is Up - 1Gbps/Full - flow control rx/tx
[   30.392929] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0f1: link becomes ready
[   44.560530] rfkill: input handler disabled
[   46.864543] Bluetooth: RFCOMM TTY layer initialized
[   46.864555] Bluetooth: RFCOMM socket layer initialized
[   46.864569] Bluetooth: RFCOMM ver 1.11
[   64.449511] rfkill: input handler enabled
[   69.708191] rfkill: input handler disabled
[ 2342.617495] r8169 0000:01:00.1 enp1s0f1: Link is Down
[ 2343.730478] PM: suspend entry (deep)
[ 2346.758398] Filesystems sync: 3.027 seconds
[ 2346.790017] Freezing user space processes ... (elapsed 0.003 seconds) done.
[ 2346.793430] OOM killer disabled.
[ 2346.793431] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 2346.794471] printk: Suspending console(s) (use no_console_suspend to debug)
[ 2346.801354] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2346.802369] sd 0:0:0:0: [sda] Stopping disk
[ 2347.334749] PM: suspend devices took 0.540 seconds
[ 2347.348020] ACPI: EC: interrupt blocked
[ 2347.360770] ACPI: PM: Preparing to enter system sleep state S3
[ 2347.360986] ACPI: EC: event blocked
[ 2347.360987] ACPI: EC: EC stopped
[ 2347.360988] ACPI: PM: Saving platform NVS memory
[ 2347.361018] Disabling non-boot CPUs ...
[ 2347.362849] smpboot: CPU 1 is now offline
[ 2347.365595] smpboot: CPU 2 is now offline
[ 2347.367836] smpboot: CPU 3 is now offline
[ 2347.374191] ACPI: PM: Low-level resume complete
[ 2347.374226] ACPI: EC: EC started
[ 2347.374228] ACPI: PM: Restoring platform NVS memory
[ 2347.374640] Enabling non-boot CPUs ...
[ 2347.374722] x86: Booting SMP configuration:
[ 2347.374723] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 2347.378161] CPU1 is up
[ 2347.378224] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 2347.382577] CPU2 is up
[ 2347.382636] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 2347.384248] CPU3 is up
[ 2347.386632] ACPI: PM: Waking up from system sleep state S3
[ 2347.387445] ACPI: button: The lid device is not compliant to SW_LID.
[ 2347.387805] ACPI: EC: interrupt unblocked
[ 2347.506831] ACPI: EC: event unblocked
[ 2347.507989] sd 0:0:0:0: [sda] Starting disk
[ 2347.818692] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2347.822787] ata2.00: configured for UDMA/133
[ 2347.888770] usb 2-2: reset low-speed USB device number 2 using xhci_hcd
[ 2348.270887] usb 2-5: reset full-speed USB device number 3 using xhci_hcd
[ 2348.510672] usb 2-7: reset high-speed USB device number 4 using xhci_hcd
[ 2349.898442] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2349.964393] ata1.00: configured for UDMA/133
[ 2349.998787] PM: resume devices took 2.492 seconds
[ 2349.999028] OOM killer enabled.
[ 2349.999032] Restarting tasks ... done.
[ 2350.004567] random: crng reseeded on system resumption
[ 2350.010009] pci_bus 0000:01: Allocating resources
[ 2350.010026] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 2350.010039] pci_bus 0000:02: Allocating resources
[ 2350.010076] pcieport 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[ 2350.010081] pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 2350.010094] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffe0000 64bit pref] for e820 entry [mem 0x00088000-0x000bffff]
[ 2350.010104] clipped [mem size 0x00020000 64bit pref] to [mem size 0x00000000 64bit pref] for e820 entry [mem 0x00088000-0x000bffff]
[ 2350.010111] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0x9fb00000-0x9fcfffff 64bit pref]
[ 2350.010116] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffe0000 64bit pref] for e820 entry [mem 0x00088000-0x000bffff]
[ 2350.010124] clipped [mem size 0x00020000 64bit pref] to [mem size 0x00000000 64bit pref] for e820 entry [mem 0x00088000-0x000bffff]
[ 2350.010130] pcieport 0000:00:1c.3: BAR 15: assigned [mem 0x9fd00000-0x9fefffff 64bit pref]
[ 2350.010137] pcieport 0000:00:1c.3: BAR 13: assigned [io  0x2000-0x2fff]
[ 2350.010561] pci_bus 0000:01: Allocating resources
[ 2350.010577] pci_bus 0000:02: Allocating resources
[ 2350.024574] ACPI: battery: [Firmware Bug]: (dis)charge rate invalid.
[ 2350.024593] PM: suspend exit
[ 2350.117408] Generic FE-GE Realtek PHY r8169-0-101:00: attached PHY driver (mii_bus:phy_addr=r8169-0-101:00, irq=MAC)
[ 2350.133850] Bluetooth: hci0: BCM: chip id 63
[ 2350.134849] Bluetooth: hci0: BCM: features 0x07
[ 2350.150862] Bluetooth: hci0: BCM20702A
[ 2350.150870] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 2350.152102] Bluetooth: hci0: BCM: firmware Patch file not found, tried:
[ 2350.152107] Bluetooth: hci0: BCM: 'brcm/BCM20702A1-0489-e046.hcd'
[ 2350.152110] Bluetooth: hci0: BCM: 'brcm/BCM-0489-e046.hcd'
[ 2350.204405] Bluetooth: MGMT ver 1.22
[ 2350.285588] r8169 0000:01:00.1 enp1s0f1: Link is Down
[ 2353.707924] r8169 0000:01:00.1 enp1s0f1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 2353.707939] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0f1: link becomes ready
[ 2355.259679] r8169 0000:01:00.1 enp1s0f1: Link is Down
[ 2358.147555] r8169 0000:01:00.1 enp1s0f1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 2390.095381] r8169 0000:01:00.1 enp1s0f1: Link is Down
[ 2392.987496] r8169 0000:01:00.1 enp1s0f1: Link is Up - 1Gbps/Full - flow control rx/tx

xylphute · 11/03/2023 18:29:52

Quand tu as installé fedora, sur le livecd elle fonctionnait ?

afl45 · 11/03/2023 19:26:59

non j'ai du faire en filaire

pierrotlalune · 11/03/2023 19:33:43

Bonjour à tous:-),
je rejoins cette conversation, car j'ai perdu la connexion wifi lors de la dernière maj.

 lspci -nnk | grep -iA3 "Network"
06:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
	Subsystem: Dell Wireless 1395 WLAN Mini-Card [1028:000b]
	Kernel modules: ssb
07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 02)
$

Peut être un problème avec "akmod-wl" ?!
Je vais creusé.
a+
pll

pierrotlalune · 11/03/2023 20:27:17

C'est un problème de noyau. Avec le dernier "6.1.15-200" le wifi ne fonctionne pas, mais avec le précédent (pour moi) "6.1.13-200" c'est bon.

Nicosss · 11/03/2023 21:22:06

As-tu installé le paquet akmod-wl ? https://doc.fedora-fr.org/wiki/Installa … A9taire.29

pierrotlalune · 11/03/2023 22:42:34

Nicosss a écrit :

As-tu installé le paquet akmod-wl ? https://doc.fedora-fr.org/wiki/Installa … A9taire.29

Oui:

$ rpm -qa | grep akmod-wl
akmod-wl-6.30.223.271-46.fc37.x86_64
$

Nicosss · 11/03/2023 23:20:42

pierrotlalune a écrit :

Nicosss a écrit :
As-tu installé le paquet akmod-wl ? https://doc.fedora-fr.org/wiki/Installa … A9taire.29
Oui:
$ rpm -qa | grep akmod-wl
akmod-wl-6.30.223.271-46.fc37.x86_64
$ 

En fait si tu avais ouvert ton propre sujet ça serait plus simple pour éviter de tout mélanger.

pierrotlalune · 11/03/2023 23:48:05

OK Nicosss , je quitte ce fil...

afl45 · 12/03/2023 18:05:57

salut,
quand j'esaie d'installer le paquet akmod-wl, il me dit qu'il ne trouve aucune correspondance.
c'est bien un l minuscule et non un chiffre 1, ou une I majuscule ?

[accer_alan_xmr@pc-131 ~]$ sudo dnf install akmod-wl
[sudo] Mot de passe de accer_alan_xmr : 
Dernière vérification de l’expiration des métadonnées effectuée il y a 3:45:44 le dim. 12 mars 2023 13:15:32.
Aucune correspondance pour le paramètre: akmod-wl
Erreur : Impossible de trouver une correspondance: akmod-wl

afl45 · 12/03/2023 18:08:31

pierrotlalune a écrit :

Nicosss a écrit :
As-tu installé le paquet akmod-wl ? https://doc.fedora-fr.org/wiki/Installa … A9taire.29
Oui:
$ rpm -qa | grep akmod-wl
akmod-wl-6.30.223.271-46.fc37.x86_64
$ 

comment as-tu installer le paquet akmod-wl, moi il me trouve aucune correspondance ?

Nicosss · 12/03/2023 19:27:04

Il faut que tu lises la documentation que je t'ai fournie, en plus je t'ai placé au paragraphe concerné pour faciliter les choses.

Fedora-Fr - Communauté francophone Fedora - Linux

Annonce

#1 10/03/2023 22:56:15

Problème carte wifi BROADCOM Fedora 37

#2 11/03/2023 08:15:26

Re : Problème carte wifi BROADCOM Fedora 37

#3 11/03/2023 16:21:04

Re : Problème carte wifi BROADCOM Fedora 37

#4 11/03/2023 18:29:52

Re : Problème carte wifi BROADCOM Fedora 37

#5 11/03/2023 19:26:59

Re : Problème carte wifi BROADCOM Fedora 37

#6 11/03/2023 19:33:43

Re : Problème carte wifi BROADCOM Fedora 37

#7 11/03/2023 20:27:17

Re : Problème carte wifi BROADCOM Fedora 37

#8 11/03/2023 21:22:06

Re : Problème carte wifi BROADCOM Fedora 37

#9 11/03/2023 22:42:34

Re : Problème carte wifi BROADCOM Fedora 37

#10 11/03/2023 23:20:42

Re : Problème carte wifi BROADCOM Fedora 37

#11 11/03/2023 23:48:05

Re : Problème carte wifi BROADCOM Fedora 37

#12 12/03/2023 18:05:57

Re : Problème carte wifi BROADCOM Fedora 37

#13 12/03/2023 18:08:31

Re : Problème carte wifi BROADCOM Fedora 37

#14 12/03/2023 19:27:04

Re : Problème carte wifi BROADCOM Fedora 37

Pied de page des forums