Fedora-Fr - Communauté francophone Fedora - Linux

Communauté francophone des utilisateurs de la distribution Linux Fedora.

  

Dernière news : Mettez à jour vos systèmes, Fedora 33 n'est plus corrigé !

#1 18/11/2021 21:38:58

bruno09
Membre
Lieu : Ariège
Inscription : 21/10/2020
Messages : 42

[Résolu] Carte graphique HS?

Bonsoir,

Avant de changer de carte graphique, je me tourne vers vous pour avoir vos avis et votre aide pour me guider
Suite a la migration d'un PC de F34 à F35, je n'ai eu qu'un problème avec le dernier akmod-nvidia.
Le PC démarrait a chaque fois avec le driver Nouveau, mais c'était réglé en les remplaçant par les akmod-nvidia-470xx.
Ce PC fonctionne depuis F33>F34>F35 une semaine :)

Processeur: Intel I7/ CM P67 Sabertooth/ SSD
Graphique:  Nvidia GTX660 Ti
16 Go RAM

En pleine session, le pc a figé sur les vidéos et en lançant un jeu il y avait des artefacts graphiques, et en redémarrant c'était lent et plus d’accélération.

j'ai donc décidé de tout réinstaller pour repartir de zero (livecd F35 Workstation), et cela n'a pu se faire qu'en mode basic graphique, en normal, je suis sur une page de login vide avec la souris.
suite a l'install en basic, j'ai retenté de réinstaller les akmod-nvidia pas la peine la galère, il forçait le démarrage avec nouveau, mais même avec nouveau ce n'était pas utilisable (menu deroulant qui clignote, petit pixel graphique,etc..) j'ai réinstaller en mode basic (pas nouveau) pas d’accélération et la résolution en 1080 est correcte mais n'est pas étendu sur le 27". (jai peur de réinstaller les akmod-nvidia-470xx, et de ne plus pouvoir encore utiliser le PC. (j’espère que la carte mère n'est pas en cause aussi)

Dans le A propos de Fedora j'ai:
Modèle du matériel : System manufacturer System Product (normal ça?)
Carte graphique : llvmpipe (LLVM 13.0.0, 256 bits)
Système de fenetrage : X11

$ uname -a
Linux localhost-live 5.14.17-301.fc35.x86_64 #1 SMP Mon Nov 8 13:57:43 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
$ inxi -G
Graphics:  Device-1: NVIDIA GK104 [GeForce GTX 660 Ti] driver: N/A 
           Display: x11 server: X.Org 1.20.11 driver: loaded: nouveau,vesa unloaded: fbdev,modesetting 
           resolution: 1920x1080 
           OpenGL: renderer: llvmpipe (LLVM 13.0.0 256 bits) v: 4.5 Mesa 21.2.
$ inxi -G
Graphics:  Device-1: NVIDIA GK104 [GeForce GTX 660 Ti] driver: N/A 
           Display: x11 server: X.Org 1.20.11 driver: loaded: nouveau,vesa unloaded: fbdev,modesetting 
           resolution: 1920x1080 
           OpenGL: renderer: llvmpipe (LLVM 13.0.0 256 bits) v: 4.5 Mesa 21.2.
$ lspci -vnn | grep VGA
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK104 [GeForce GTX 660 Ti] [10de:1183] (rev a1) (prog-if 00 [VGA controller])
$ lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 05)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)
00:1c.6 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5)
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation P67 Express Chipset LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port Desktop SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: NVIDIA Corporation GK104 [GeForce GTX 660 Ti] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GK104 HDMI Audio Controller (rev a1)
03:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
04:00.0 SATA controller: JMicron Technology Corp. JMB362 SATA Controller (rev 10)
05:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
06:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 01)
07:01.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
08:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 11)
lsmod | grep nouveau
nouveau              2400256  0
drm_ttm_helper         16384  1 nouveau
ttm                    86016  2 drm_ttm_helper,nouveau
i2c_algo_bit           16384  1 nouveau
drm_kms_helper        303104  1 nouveau
mxm_wmi                16384  1 nouveau
drm                   630784  4 drm_kms_helper,drm_ttm_helper,ttm,nouveau
wmi                    36864  4 asus_wmi,wmi_bmof,mxm_wmi,nouveau
video                  57344  2 asus_wmi,nouveau
$ cat /var/log/Xorg.0.log | grep EE && cat /var/log/Xorg.0.log | grep WW
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     9.096] (EE) Failed to load module "nv" (module does not exist, 0)
[     9.227] (EE) [drm] Failed to open DRM device for pci:0000:01:00.0: -19
[     9.227] (EE) open /dev/dri/card0: No such file or directory
[     9.227] (EE) open /dev/dri/card0: No such file or directory
[     9.228] (EE) Unable to find a valid framebuffer device
[     9.229] (EE) open /dev/fb0: No such file or directory
[     9.229] (EE) Screen 0 deleted because of no matching config section.
[     9.229] (EE) Screen 0 deleted because of no matching config section.
[     9.725] (II) Initializing extension MIT-SCREEN-SAVER
[   731.280] (EE) event2  - SINO WEALTH USB KEYBOARD: client bug: event processing lagging behind by 26ms, your system is too slow
[  1218.719] (EE) event5  - SINOWEALTH Game Mouse: client bug: event processing lagging behind by 11ms, your system is too slow
[  1311.289] (EE) event2  - SINO WEALTH USB KEYBOARD: client bug: event processing lagging behind by 29ms, your system is too slow
[  1498.469] (EE) event5  - SINOWEALTH Game Mouse: client bug: event processing lagging behind by 11ms, your system is too slow
[  1580.380] (EE) event2  - SINO WEALTH USB KEYBOARD: client bug: event processing lagging behind by 18ms, your system is too slow
[  3910.582] (EE) event2  - SINO WEALTH USB KEYBOARD: client bug: event processing lagging behind by 21ms, your system is too slow
[  4110.248] (EE) event2  - SINO WEALTH USB KEYBOARD: client bug: event processing lagging behind by 29ms, your system is too slow
[  4110.248] (EE) event2  - SINO WEALTH USB KEYBOARD: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages.
[  4181.536] (EE) event5  - SINOWEALTH Game Mouse: client bug: event processing lagging behind by 21ms, your system is too slow
[  4182.214] (EE) event5  - SINOWEALTH Game Mouse: client bug: event processing lagging behind by 15ms, your system is too slow
[  4379.900] (EE) event2  - SINO WEALTH USB KEYBOARD: client bug: event processing lagging behind by 32ms, your system is too slow
[  4460.234] (EE) event5  - SINOWEALTH Game Mouse: client bug: event processing lagging behind by 15ms, your system is too slow
[  4460.234] (EE) event5  - SINOWEALTH Game Mouse: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages.
[  5835.721] (EE) event5  - SINOWEALTH Game Mouse: client bug: event processing lagging behind by 12ms, your system is too slow
[  6568.622] (EE) event5  - SINOWEALTH Game Mouse: client bug: event processing lagging behind by 16ms, your system is too slow
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     9.096] (WW) Warning, couldn't open module nv
[     9.227] (WW) Falling back to old probe method for modesetting
[     9.228] (WW) Falling back to old probe method for fbdev
[     9.541] (WW) VESA(0): Unable to estimate virtual size
dmesg
[    0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-02-17
[    0.000000] Linux version 5.14.17-301.fc35.x86_64 (mockbuild@bkernel01.iad2.fedoraproject.org) (gcc (GCC) 11.2.1 20210728 (Red Hat 11.2.1-1), GNU ld version 2.37-10.fc35) #1 SMP Mon Nov 8 13:57:43 UTC 2021
[    0.000000] Command line: BOOT_IMAGE=(hd0,msdos1)/vmlinuz-5.14.17-301.fc35.x86_64 root=UUID=3c8ecf50-8061-4af0-92df-9e4b26244368 ro rootflags=subvol=root nomodeset rhgb quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000deb8ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000deb90000-0x00000000df13ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000df140000-0x00000000df384fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000df385000-0x00000000df392fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000df393000-0x00000000df3bffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000df3c0000-0x00000000df3c4fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000df3c5000-0x00000000df407fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000df408000-0x00000000df7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: System manufacturer System Product Name/SABERTOOTH P67, BIOS 3602 11/01/2012
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3411.118 MHz processor
[    0.000839] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000842] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000847] last_pfn = 0x41f000 max_arch_pfn = 0x400000000
[    0.001473] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002075] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.002082] last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[    0.009673] found SMP MP-table at [mem 0x000fcdc0-0x000fcdcf]
[    0.010119] RAMDISK: [mem 0x34319000-0x36184fff]
[    0.010124] ACPI: Early table checksum verification disabled
[    0.010127] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
[    0.010130] ACPI: XSDT 0x00000000DF385070 00005C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.010134] ACPI: FACP 0x00000000DF390AA8 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.010139] ACPI: DSDT 0x00000000DF385168 00B93C (v02 ALASKA A M I    00000015 INTL 20051117)
[    0.010142] ACPI: FACS 0x00000000DF3BEF80 000040
[    0.010144] ACPI: APIC 0x00000000DF390BA0 000092 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.010147] ACPI: MCFG 0x00000000DF390C38 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.010149] ACPI: HPET 0x00000000DF390C78 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.010152] ACPI: SSDT 0x00000000DF390CB0 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.010155] ACPI: SSDT 0x00000000DF391020 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.010157] ACPI: SSDT 0x00000000DF3919D0 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.010159] ACPI: Reserving FACP table memory at [mem 0xdf390aa8-0xdf390b9b]
[    0.010161] ACPI: Reserving DSDT table memory at [mem 0xdf385168-0xdf390aa3]
[    0.010162] ACPI: Reserving FACS table memory at [mem 0xdf3bef80-0xdf3befbf]
[    0.010162] ACPI: Reserving APIC table memory at [mem 0xdf390ba0-0xdf390c31]
[    0.010163] ACPI: Reserving MCFG table memory at [mem 0xdf390c38-0xdf390c73]
[    0.010164] ACPI: Reserving HPET table memory at [mem 0xdf390c78-0xdf390caf]
[    0.010165] ACPI: Reserving SSDT table memory at [mem 0xdf390cb0-0xdf39101c]
[    0.010166] ACPI: Reserving SSDT table memory at [mem 0xdf391020-0xdf3919c9]
[    0.010167] ACPI: Reserving SSDT table memory at [mem 0xdf3919d0-0xdf392461]
[    0.010217] No NUMA configuration found
[    0.010217] Faking a node at [mem 0x0000000000000000-0x000000041effffff]
[    0.010226] NODE_DATA(0) allocated [mem 0x41efca000-0x41eff4fff]
[    0.035781] Zone ranges:
[    0.035784]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.035787]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.035788]   Normal   [mem 0x0000000100000000-0x000000041effffff]
[    0.035789]   Device   empty
[    0.035790] Movable zone start for each node
[    0.035793] Early memory node ranges
[    0.035793]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.035794]   node   0: [mem 0x0000000000100000-0x00000000deb8ffff]
[    0.035796]   node   0: [mem 0x00000000df408000-0x00000000df7fffff]
[    0.035796]   node   0: [mem 0x0000000100000000-0x000000041effffff]
[    0.035799] Initmem setup node 0 [mem 0x0000000000001000-0x000000041effffff]
[    0.035803] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.035828] On node 0, zone DMA: 99 pages in unavailable ranges
[    0.041317] On node 0, zone DMA32: 2168 pages in unavailable ranges
[    0.061053] On node 0, zone Normal: 2048 pages in unavailable ranges
[    0.061096] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.061220] ACPI: PM-Timer IO Port: 0x408
[    0.061227] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.061238] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.061240] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.061242] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.061245] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.061246] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.061249] TSC deadline timer available
[    0.061250] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.061266] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.061268] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.061269] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.061270] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.061270] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.061272] PM: hibernation: Registered nosave memory: [mem 0xdeb90000-0xdf13ffff]
[    0.061273] PM: hibernation: Registered nosave memory: [mem 0xdf140000-0xdf384fff]
[    0.061273] PM: hibernation: Registered nosave memory: [mem 0xdf385000-0xdf392fff]
[    0.061274] PM: hibernation: Registered nosave memory: [mem 0xdf393000-0xdf3bffff]
[    0.061275] PM: hibernation: Registered nosave memory: [mem 0xdf3c0000-0xdf3c4fff]
[    0.061275] PM: hibernation: Registered nosave memory: [mem 0xdf3c5000-0xdf407fff]
[    0.061277] PM: hibernation: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
[    0.061277] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.061278] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.061279] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.061280] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.061280] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.061281] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.061282] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.061282] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.061283] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.061284] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.061284] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.061286] [mem 0xdf800000-0xf7ffffff] available for PCI devices
[    0.061287] Booting paravirtualized kernel on bare hardware
[    0.061289] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.066235] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.066404] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144
[    0.066409] pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152
[    0.066411] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.066439] Built 1 zonelists, mobility grouping on.  Total pages: 4120329
[    0.066440] Policy zone: Normal
[    0.066441] Kernel command line: BOOT_IMAGE=(hd0,msdos1)/vmlinuz-5.14.17-301.fc35.x86_64 root=UUID=3c8ecf50-8061-4af0-92df-9e4b26244368 ro rootflags=subvol=root nomodeset rhgb quiet
[    0.066485] You have booted with nomodeset. This means your GPU drivers are DISABLED
[    0.066485] Any video related functionality will be severely degraded, and you may not even be able to suspend the system properly
[    0.066486] Unless you actually understand what nomodeset does, you should reboot without enabling it
[    0.066509] Unknown command line parameters: rhgb BOOT_IMAGE=(hd0,msdos1)/vmlinuz-5.14.17-301.fc35.x86_64
[    0.067204] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.067556] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.067627] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.107723] Memory: 16301084K/16743568K available (16393K kernel code, 3531K rwdata, 10388K rodata, 2872K init, 4908K bss, 442224K reserved, 0K cma-reserved)
[    0.107729] random: get_random_u64 called from __kmem_cache_create+0x2a/0x500 with crng_init=0
[    0.107839] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.107850] Kernel/User page tables isolation: enabled
[    0.107866] ftrace: allocating 46962 entries in 184 pages
[    0.120375] ftrace: allocated 184 pages with 4 groups
[    0.120449] rcu: Hierarchical RCU implementation.
[    0.120451] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.120452] 	Trampoline variant of Tasks RCU enabled.
[    0.120452] 	Rude variant of Tasks RCU enabled.
[    0.120453] 	Tracing variant of Tasks RCU enabled.
[    0.120453] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.120454] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.123846] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[    0.128524] Console: colour VGA+ 80x25
[    0.128534] printk: console [tty0] enabled
[    0.128550] ACPI: Core revision 20210604
[    0.128631] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.128645] APIC: Switch to symmetric I/O mode setup
[    0.129044] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.133644] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x312b55593f2, max_idle_ns: 440795223899 ns
[    0.133649] Calibrating delay loop (skipped), value calculated using timer frequency.. 6822.23 BogoMIPS (lpj=3411118)
[    0.133651] pid_max: default: 32768 minimum: 301
[    0.133671] LSM: Security Framework initializing
[    0.133679] Yama: becoming mindful.
[    0.133685] SELinux:  Initializing.
[    0.133706] LSM support for eBPF active
[    0.133707] landlock: Up and running.
[    0.133737] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.133762] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.133939] x86/cpu: VMX (outside TXT) disabled by BIOS
[    0.133945] CPU0: Thermal monitoring enabled (TM1)
[    0.133961] process: using mwait in idle threads
[    0.133962] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.133963] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.133966] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.133968] Spectre V2 : Mitigation: Full generic retpoline
[    0.133968] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.133969] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.133970] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.133970] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.133972] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.133974] MDS: Mitigation: Clear CPU buffers
[    0.138169] Freeing SMP alternatives memory: 44K
[    0.138707] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1776
[    0.138713] smpboot: CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.138826] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.138833] ... version:                3
[    0.138833] ... bit width:              48
[    0.138834] ... generic registers:      4
[    0.138834] ... value mask:             0000ffffffffffff
[    0.138835] ... max period:             00007fffffffffff
[    0.138836] ... fixed-purpose events:   3
[    0.138837] ... event mask:             000000070000000f
[    0.138943] rcu: Hierarchical SRCU implementation.
[    0.139538] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.139607] smp: Bringing up secondary CPUs ...
[    0.139646] x86: Booting SMP configuration:
[    0.139646] .... node  #0, CPUs:      #1 #2 #3 #4
[    0.144729] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.144760]  #5 #6 #7
[    0.147696] smp: Brought up 1 node, 8 CPUs
[    0.147696] smpboot: Max logical packages: 1
[    0.147696] smpboot: Total of 8 processors activated (54577.88 BogoMIPS)
[    0.149300] devtmpfs: initialized
[    0.149300] x86/mm: Memory block size: 128MB
[    0.150313] ACPI: PM: Registering ACPI NVS region [mem 0xdf140000-0xdf384fff] (2379776 bytes)
[    0.150313] ACPI: PM: Registering ACPI NVS region [mem 0xdf393000-0xdf3bffff] (184320 bytes)
[    0.150313] ACPI: PM: Registering ACPI NVS region [mem 0xdf3c5000-0xdf407fff] (274432 bytes)
[    0.150313] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.150313] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.150313] pinctrl core: initialized pinctrl subsystem
[    0.150313] PM: RTC time: 16:49:57, date: 2021-11-18
[    0.150707] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.150785] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.150789] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.150791] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.150800] audit: initializing netlink subsys (disabled)
[    0.150806] audit: type=2000 audit(1637254197.022:1): state=initialized audit_enabled=0 res=1
[    0.150806] thermal_sys: Registered thermal governor 'fair_share'
[    0.150806] thermal_sys: Registered thermal governor 'bang_bang'
[    0.150806] thermal_sys: Registered thermal governor 'step_wise'
[    0.150806] thermal_sys: Registered thermal governor 'user_space'
[    0.150806] cpuidle: using governor menu
[    0.150806] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.150806] ACPI: bus type PCI registered
[    0.150806] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.150841] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.150844] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.150850] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[    0.150919] PCI: Using configuration type 1 for base access
[    0.150954] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.151203] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.152584] Kprobes globally optimized
[    0.152654] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.315778] cryptd: max_cpu_qlen set to 1000
[    0.316809] alg: No test for 842 (842-generic)
[    0.316809] alg: No test for 842 (842-scomp)
[    0.319671] raid6: skip pq benchmark and using algorithm sse2x4
[    0.319673] raid6: using ssse3x2 recovery algorithm
[    0.319707] ACPI: Added _OSI(Module Device)
[    0.319708] ACPI: Added _OSI(Processor Device)
[    0.319709] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.319709] ACPI: Added _OSI(Processor Aggregator Device)
[    0.319710] ACPI: Added _OSI(Linux-Dell-Video)
[    0.319711] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.319712] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.324140] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.325022] ACPI: Dynamic OEM Table Load:
[    0.325027] ACPI: SSDT 0xFFFFA0CC809AA000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.325462] ACPI: Dynamic OEM Table Load:
[    0.325465] ACPI: SSDT 0xFFFFA0CC80EEE800 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.325805] ACPI: Dynamic OEM Table Load:
[    0.325808] ACPI: SSDT 0xFFFFA0CC8025F200 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.326985] ACPI: EC: EC started
[    0.326986] ACPI: EC: interrupt blocked
[    0.326989] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.326991] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    0.326992] ACPI: Interpreter enabled
[    0.327009] ACPI: PM: (supports S0 S1 S3 S4 S5)
[    0.327010] ACPI: Using IOAPIC for interrupt routing
[    0.327030] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.327184] ACPI: Enabled 9 GPEs in block 00 to 3F
[    0.331917] ACPI: PM: Power Resource [FN00]
[    0.331968] ACPI: PM: Power Resource [FN01]
[    0.332016] ACPI: PM: Power Resource [FN02]
[    0.332064] ACPI: PM: Power Resource [FN03]
[    0.332113] ACPI: PM: Power Resource [FN04]
[    0.332492] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.332497] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.332550] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_ERROR)
[    0.332892] PCI host bridge to bus 0000:00
[    0.332894] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.332896] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.332897] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.332898] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.332901] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.332902] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.332903] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.332904] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.332905] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.332906] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[    0.332908] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.332917] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.332990] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.333018] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.333124] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.333144] pci 0000:00:16.0: reg 0x10: [mem 0xf762c000-0xf762c00f 64bit]
[    0.333212] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.333289] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
[    0.333302] pci 0000:00:19.0: reg 0x10: [mem 0xf7600000-0xf761ffff]
[    0.333310] pci 0000:00:19.0: reg 0x14: [mem 0xf7629000-0xf7629fff]
[    0.333318] pci 0000:00:19.0: reg 0x18: [io  0xf040-0xf05f]
[    0.333372] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.333459] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.333474] pci 0000:00:1a.0: reg 0x10: [mem 0xf7628000-0xf76283ff]
[    0.333553] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.333641] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.333657] pci 0000:00:1b.0: reg 0x10: [mem 0xf7620000-0xf7623fff 64bit]
[    0.333729] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.333820] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.333904] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.333999] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.334083] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.334179] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.334262] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.334360] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.334443] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.334540] pci 0000:00:1c.6: [8086:244e] type 01 class 0x060401
[    0.334623] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.334719] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[    0.334803] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.334899] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.334914] pci 0000:00:1d.0: reg 0x10: [mem 0xf7627000-0xf76273ff]
[    0.334993] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.335080] pci 0000:00:1f.0: [8086:1c46] type 00 class 0x060100
[    0.335255] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[    0.335267] pci 0000:00:1f.2: reg 0x10: [io  0xf090-0xf097]
[    0.335274] pci 0000:00:1f.2: reg 0x14: [io  0xf080-0xf083]
[    0.335281] pci 0000:00:1f.2: reg 0x18: [io  0xf070-0xf077]
[    0.335288] pci 0000:00:1f.2: reg 0x1c: [io  0xf060-0xf063]
[    0.335295] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.335302] pci 0000:00:1f.2: reg 0x24: [mem 0xf7626000-0xf76267ff]
[    0.335338] pci 0000:00:1f.2: PME# supported from D3hot
[    0.335416] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.335432] pci 0000:00:1f.3: reg 0x10: [mem 0xf7625000-0xf76250ff 64bit]
[    0.335451] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.335567] pci 0000:01:00.0: [10de:1183] type 00 class 0x030000
[    0.335578] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.335587] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[    0.335596] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.335602] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.335608] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.335613] pci 0000:01:00.0: enabling Extended Tags
[    0.335679] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    0.335719] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
[    0.335730] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[    0.335764] pci 0000:01:00.1: enabling Extended Tags
[    0.335843] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.335845] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.335847] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.335849] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[    0.335891] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.335966] pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330
[    0.335996] pci 0000:03:00.0: reg 0x10: [mem 0xf7500000-0xf7501fff 64bit]
[    0.336150] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.336277] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.336283] pci 0000:00:1c.1:   bridge window [mem 0xf7500000-0xf75fffff]
[    0.336379] pci 0000:04:00.0: [197b:2362] type 00 class 0x010601
[    0.336406] pci 0000:04:00.0: reg 0x10: [io  0xd040-0xd047]
[    0.336422] pci 0000:04:00.0: reg 0x14: [io  0xd030-0xd033]
[    0.336437] pci 0000:04:00.0: reg 0x18: [io  0xd020-0xd027]
[    0.336452] pci 0000:04:00.0: reg 0x1c: [io  0xd010-0xd013]
[    0.336468] pci 0000:04:00.0: reg 0x20: [io  0xd000-0xd00f]
[    0.336483] pci 0000:04:00.0: reg 0x24: [mem 0xf7410000-0xf74101ff]
[    0.336499] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.336572] pci 0000:04:00.0: PME# supported from D3hot
[    0.336688] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.336692] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.336695] pci 0000:00:1c.3:   bridge window [mem 0xf7400000-0xf74fffff]
[    0.336769] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
[    0.336799] pci 0000:05:00.0: reg 0x10: [mem 0xf7300000-0xf7301fff 64bit]
[    0.336953] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[    0.337082] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.337087] pci 0000:00:1c.4:   bridge window [mem 0xf7300000-0xf73fffff]
[    0.337150] pci 0000:06:00.0: [1b21:1080] type 01 class 0x060401
[    0.337320] pci 0000:00:1c.6: PCI bridge to [bus 06-07] (subtractive decode)
[    0.337324] pci 0000:00:1c.6:   bridge window [io  0xc000-0xcfff]
[    0.337327] pci 0000:00:1c.6:   bridge window [mem 0xf7200000-0xf72fffff]
[    0.337333] pci 0000:00:1c.6:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.337334] pci 0000:00:1c.6:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.337335] pci 0000:00:1c.6:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.337337] pci 0000:00:1c.6:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.337338] pci 0000:00:1c.6:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.337339] pci 0000:00:1c.6:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.337340] pci 0000:00:1c.6:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.337341] pci 0000:00:1c.6:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.337342] pci 0000:00:1c.6:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.337343] pci 0000:00:1c.6:   bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[    0.337375] pci_bus 0000:07: extended config space not accessible
[    0.337401] pci 0000:07:01.0: [1106:3044] type 00 class 0x0c0010
[    0.337432] pci 0000:07:01.0: reg 0x10: [mem 0xf7200000-0xf72007ff]
[    0.337449] pci 0000:07:01.0: reg 0x14: [io  0xc000-0xc07f]
[    0.337579] pci 0000:07:01.0: supports D2
[    0.337580] pci 0000:07:01.0: PME# supported from D2 D3hot D3cold
[    0.337688] pci 0000:06:00.0: PCI bridge to [bus 07] (subtractive decode)
[    0.337698] pci 0000:06:00.0:   bridge window [io  0xc000-0xcfff]
[    0.337703] pci 0000:06:00.0:   bridge window [mem 0xf7200000-0xf72fffff]
[    0.337712] pci 0000:06:00.0:   bridge window [io  0xc000-0xcfff] (subtractive decode)
[    0.337713] pci 0000:06:00.0:   bridge window [mem 0xf7200000-0xf72fffff] (subtractive decode)
[    0.337714] pci 0000:06:00.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.337715] pci 0000:06:00.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.337717] pci 0000:06:00.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.337718] pci 0000:06:00.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.337719] pci 0000:06:00.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.337720] pci 0000:06:00.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.337721] pci 0000:06:00.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.337722] pci 0000:06:00.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.337723] pci 0000:06:00.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.337724] pci 0000:06:00.0:   bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[    0.337798] pci 0000:08:00.0: [1b4b:9172] type 00 class 0x010601
[    0.337819] pci 0000:08:00.0: reg 0x10: [io  0xb040-0xb047]
[    0.337831] pci 0000:08:00.0: reg 0x14: [io  0xb030-0xb033]
[    0.337843] pci 0000:08:00.0: reg 0x18: [io  0xb020-0xb027]
[    0.337855] pci 0000:08:00.0: reg 0x1c: [io  0xb010-0xb013]
[    0.337868] pci 0000:08:00.0: reg 0x20: [io  0xb000-0xb00f]
[    0.337880] pci 0000:08:00.0: reg 0x24: [mem 0xf7110000-0xf71101ff]
[    0.337892] pci 0000:08:00.0: reg 0x30: [mem 0xf7100000-0xf710ffff pref]
[    0.337909] pci 0000:08:00.0: Enabling fixed DMA alias to 00.1
[    0.337960] pci 0000:08:00.0: PME# supported from D3hot
[    0.338060] pci 0000:00:1c.7: PCI bridge to [bus 08]
[    0.338064] pci 0000:00:1c.7:   bridge window [io  0xb000-0xbfff]
[    0.338067] pci 0000:00:1c.7:   bridge window [mem 0xf7100000-0xf71fffff]
[    0.338523] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[    0.338561] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.338597] ACPI: PCI: Interrupt link LNKC configured for IRQ 10
[    0.338634] ACPI: PCI: Interrupt link LNKD configured for IRQ 5
[    0.338672] ACPI: PCI: Interrupt link LNKE configured for IRQ 3
[    0.338707] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.338708] ACPI: PCI: Interrupt link LNKF disabled
[    0.338744] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.338779] ACPI: PCI: Interrupt link LNKH configured for IRQ 5
[    0.339002] ACPI: EC: interrupt unblocked
[    0.339003] ACPI: EC: event unblocked
[    0.339007] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.339008] ACPI: EC: GPE=0x18
[    0.339009] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete
[    0.339011] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
[    0.339068] iommu: Default domain type: Translated 
[    0.339068] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.339068] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.339068] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.339068] vgaarb: loaded
[    0.339068] SCSI subsystem initialized
[    0.339068] libata version 3.00 loaded.
[    0.339068] ACPI: bus type USB registered
[    0.339068] usbcore: registered new interface driver usbfs
[    0.339068] usbcore: registered new interface driver hub
[    0.339068] usbcore: registered new device driver usb
[    0.339068] pps_core: LinuxPPS API ver. 1 registered
[    0.339068] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.339068] PTP clock support registered
[    0.339068] EDAC MC: Ver: 3.0.0
[    0.339068] NetLabel: Initializing
[    0.339068] NetLabel:  domain hash size = 128
[    0.339068] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.339068] NetLabel:  unlabeled traffic allowed by default
[    0.339068] PCI: Using ACPI for IRQ routing
[    0.340898] PCI: pci_cache_line_size set to 64 bytes
[    0.340961] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.340963] e820: reserve RAM buffer [mem 0xdeb90000-0xdfffffff]
[    0.340964] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[    0.340965] e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
[    0.340969] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.340969] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.342682] clocksource: Switched to clocksource tsc-early
[    0.351707] VFS: Disk quotas dquot_6.6.0
[    0.351721] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.351772] pnp: PnP ACPI init
[    0.351857] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.351930] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.351932] system 00:01: [io  0x0200-0x020f] has been reserved
[    0.351933] system 00:01: [io  0xffff] has been reserved
[    0.351935] system 00:01: [io  0xffff] has been reserved
[    0.351936] system 00:01: [io  0x0400-0x0453] has been reserved
[    0.351937] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.351938] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.351939] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.351996] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.352064] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.352109] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.352276] pnp 00:06: [dma 0 disabled]
[    0.352459] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.352461] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.352463] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.352465] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.352466] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.352468] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.352470] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.352471] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.352475] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.352477] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.352478] system 00:07: [mem 0xe0000000-0xe0000fff] has been reserved
[    0.352572] pnp: PnP ACPI: found 8 devices
[    0.358091] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.358137] NET: Registered PF_INET protocol family
[    0.358290] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.360229] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.360252] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.360388] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.360480] TCP: Hash tables configured (established 131072 bind 65536)
[    0.360552] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.360602] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.360633] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.360724] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.360728] NET: Registered PF_XDP protocol family
[    0.360734] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.360738] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.360740] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.360752] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe0100000-0xe02fffff]
[    0.360757] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe0300000-0xe04fffff 64bit pref]
[    0.360760] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.360762] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.360764] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.360766] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.360768] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[    0.360771] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.360773] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.360777] pci 0000:00:1c.0:   bridge window [mem 0xe0100000-0xe02fffff]
[    0.360781] pci 0000:00:1c.0:   bridge window [mem 0xe0300000-0xe04fffff 64bit pref]
[    0.360786] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.360791] pci 0000:00:1c.1:   bridge window [mem 0xf7500000-0xf75fffff]
[    0.360799] pci 0000:04:00.0: BAR 6: assigned [mem 0xf7400000-0xf740ffff pref]
[    0.360801] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.360803] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.360807] pci 0000:00:1c.3:   bridge window [mem 0xf7400000-0xf74fffff]
[    0.360815] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.360819] pci 0000:00:1c.4:   bridge window [mem 0xf7300000-0xf73fffff]
[    0.360827] pci 0000:06:00.0: PCI bridge to [bus 07]
[    0.360830] pci 0000:06:00.0:   bridge window [io  0xc000-0xcfff]
[    0.360837] pci 0000:06:00.0:   bridge window [mem 0xf7200000-0xf72fffff]
[    0.360851] pci 0000:00:1c.6: PCI bridge to [bus 06-07]
[    0.360853] pci 0000:00:1c.6:   bridge window [io  0xc000-0xcfff]
[    0.360857] pci 0000:00:1c.6:   bridge window [mem 0xf7200000-0xf72fffff]
[    0.360865] pci 0000:00:1c.7: PCI bridge to [bus 08]
[    0.360867] pci 0000:00:1c.7:   bridge window [io  0xb000-0xbfff]
[    0.360872] pci 0000:00:1c.7:   bridge window [mem 0xf7100000-0xf71fffff]
[    0.360879] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.360881] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.360882] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.360883] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.360884] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.360885] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.360886] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.360887] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.360888] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.360890] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
[    0.360891] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.360892] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.360893] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
[    0.360894] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.360896] pci_bus 0000:02: resource 1 [mem 0xe0100000-0xe02fffff]
[    0.360897] pci_bus 0000:02: resource 2 [mem 0xe0300000-0xe04fffff 64bit pref]
[    0.360898] pci_bus 0000:03: resource 1 [mem 0xf7500000-0xf75fffff]
[    0.360899] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.360900] pci_bus 0000:04: resource 1 [mem 0xf7400000-0xf74fffff]
[    0.360901] pci_bus 0000:05: resource 1 [mem 0xf7300000-0xf73fffff]
[    0.360903] pci_bus 0000:06: resource 0 [io  0xc000-0xcfff]
[    0.360904] pci_bus 0000:06: resource 1 [mem 0xf7200000-0xf72fffff]
[    0.360905] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7 window]
[    0.360906] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff window]
[    0.360907] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.360908] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.360909] pci_bus 0000:06: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.360910] pci_bus 0000:06: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.360911] pci_bus 0000:06: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.360912] pci_bus 0000:06: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.360914] pci_bus 0000:06: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.360915] pci_bus 0000:06: resource 13 [mem 0xe0000000-0xfeafffff window]
[    0.360916] pci_bus 0000:07: resource 0 [io  0xc000-0xcfff]
[    0.360917] pci_bus 0000:07: resource 1 [mem 0xf7200000-0xf72fffff]
[    0.360918] pci_bus 0000:07: resource 4 [io  0xc000-0xcfff]
[    0.360919] pci_bus 0000:07: resource 5 [mem 0xf7200000-0xf72fffff]
[    0.360920] pci_bus 0000:07: resource 6 [io  0x0000-0x0cf7 window]
[    0.360921] pci_bus 0000:07: resource 7 [io  0x0d00-0xffff window]
[    0.360922] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.360923] pci_bus 0000:07: resource 9 [mem 0x000d0000-0x000d3fff window]
[    0.360925] pci_bus 0000:07: resource 10 [mem 0x000d4000-0x000d7fff window]
[    0.360926] pci_bus 0000:07: resource 11 [mem 0x000d8000-0x000dbfff window]
[    0.360927] pci_bus 0000:07: resource 12 [mem 0x000dc000-0x000dffff window]
[    0.360928] pci_bus 0000:07: resource 13 [mem 0x000e0000-0x000e3fff window]
[    0.360929] pci_bus 0000:07: resource 14 [mem 0x000e4000-0x000e7fff window]
[    0.360930] pci_bus 0000:07: resource 15 [mem 0xe0000000-0xfeafffff window]
[    0.360931] pci_bus 0000:08: resource 0 [io  0xb000-0xbfff]
[    0.360932] pci_bus 0000:08: resource 1 [mem 0xf7100000-0xf71fffff]
[    0.484708] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6d0 took 120809 usecs
[    0.608706] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6d0 took 121067 usecs
[    0.608727] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.608753] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.609025] pci 0000:06:00.0: Disabling ASPM L0s/L1
[    0.609036] PCI: CLS 64 bytes, default 64
[    0.609041] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.609042] software IO TLB: mapped [mem 0x00000000dab90000-0x00000000deb90000] (64MB)
[    0.609081] Trying to unpack rootfs image as initramfs...
[    0.610325] Initialise system trusted keyrings
[    0.610335] Key type blacklist registered
[    0.610361] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    0.611743] zbud: loaded
[    0.612251] integrity: Platform Keyring initialized
[    0.620596] NET: Registered PF_ALG protocol family
[    0.620598] xor: automatically using best checksumming function   avx       
[    0.620599] Key type asymmetric registered
[    0.620600] Asymmetric key parser 'x509' registered
[    0.620606] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.620635] io scheduler mq-deadline registered
[    0.620636] io scheduler kyber registered
[    0.620665] io scheduler bfq registered
[    0.621053] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.621724] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.622153] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.622182] ACPI: button: Power Button [PWRB]
[    0.622208] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.622226] ACPI: button: Power Button [PWRF]
[    0.622765] thermal LNXTHERM:00: registered as thermal_zone0
[    0.622767] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[    0.622944] thermal LNXTHERM:01: registered as thermal_zone1
[    0.622946] ACPI: thermal: Thermal Zone [TZ01] (30 C)
[    0.623113] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.623177] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.624505] Non-volatile memory driver v1.3
[    0.624523] Linux agpgart interface v0.103
[    0.625113] ahci 0000:00:1f.2: version 3.0
[    0.635685] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xa impl SATA mode
[    0.635689] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst 
[    0.639194] scsi host0: ahci
[    0.639326] scsi host1: ahci
[    0.639400] scsi host2: ahci
[    0.639470] scsi host3: ahci
[    0.639538] scsi host4: ahci
[    0.639605] scsi host5: ahci
[    0.639633] ata1: DUMMY
[    0.639635] ata2: SATA max UDMA/133 abar m2048@0xf7626000 port 0xf7626180 irq 25
[    0.639637] ata3: DUMMY
[    0.639638] ata4: SATA max UDMA/133 abar m2048@0xf7626000 port 0xf7626280 irq 25
[    0.639639] ata5: DUMMY
[    0.639640] ata6: DUMMY
[    0.639800] ahci 0000:04:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    0.639803] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    0.639971] scsi host6: ahci
[    0.640040] scsi host7: ahci
[    0.640069] ata7: SATA max UDMA/133 abar m512@0xf7410000 port 0xf7410100 irq 19
[    0.640073] ata8: SATA max UDMA/133 abar m512@0xf7410000 port 0xf7410180 irq 19
[    0.640225] ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    0.640228] ahci 0000:08:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
[    0.640394] scsi host8: ahci
[    0.640462] scsi host9: ahci
[    0.640493] ata9: SATA max UDMA/133 abar m512@0xf7110000 port 0xf7110100 irq 26
[    0.640497] ata10: SATA max UDMA/133 abar m512@0xf7110000 port 0xf7110180 irq 26
[    0.640611] libphy: Fixed MDIO Bus: probed
[    0.640733] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.640735] ehci-pci: EHCI PCI platform driver
[    0.640813] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.640858] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.640869] ehci-pci 0000:00:1a.0: debug port 2
[    0.644794] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7628000
[    0.651675] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.651725] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14
[    0.651727] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.651729] usb usb1: Product: EHCI Host Controller
[    0.651730] usb usb1: Manufacturer: Linux 5.14.17-301.fc35.x86_64 ehci_hcd
[    0.651731] usb usb1: SerialNumber: 0000:00:1a.0
[    0.651881] hub 1-0:1.0: USB hub found
[    0.651889] hub 1-0:1.0: 2 ports detected
[    0.652080] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.652158] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.652169] ehci-pci 0000:00:1d.0: debug port 2
[    0.656086] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7627000
[    0.662674] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.662718] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14
[    0.662721] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.662722] usb usb2: Product: EHCI Host Controller
[    0.662723] usb usb2: Manufacturer: Linux 5.14.17-301.fc35.x86_64 ehci_hcd
[    0.662724] usb usb2: SerialNumber: 0000:00:1d.0
[    0.662877] hub 2-0:1.0: USB hub found
[    0.662884] hub 2-0:1.0: 2 ports detected
[    0.663007] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.663012] ohci-pci: OHCI PCI platform driver
[    0.663022] uhci_hcd: USB Universal Host Controller Interface driver
[    0.663113] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.663192] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[    0.663313] xhci_hcd 0000:03:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
[    0.663597] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14
[    0.663599] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.663600] usb usb3: Product: xHCI Host Controller
[    0.663601] usb usb3: Manufacturer: Linux 5.14.17-301.fc35.x86_64 xhci-hcd
[    0.663602] usb usb3: SerialNumber: 0000:03:00.0
[    0.663726] hub 3-0:1.0: USB hub found
[    0.663738] hub 3-0:1.0: 2 ports detected
[    0.663837] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.663918] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[    0.663922] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed
[    0.666805] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.666826] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.14
[    0.666829] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.666830] usb usb4: Product: xHCI Host Controller
[    0.666831] usb usb4: Manufacturer: Linux 5.14.17-301.fc35.x86_64 xhci-hcd
[    0.666832] usb usb4: SerialNumber: 0000:03:00.0
[    0.666982] hub 4-0:1.0: USB hub found
[    0.666993] hub 4-0:1.0: 2 ports detected
[    0.667131] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    0.667214] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5
[    0.667331] xhci_hcd 0000:05:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
[    0.667612] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14
[    0.667614] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.667615] usb usb5: Product: xHCI Host Controller
[    0.667616] usb usb5: Manufacturer: Linux 5.14.17-301.fc35.x86_64 xhci-hcd
[    0.667617] usb usb5: SerialNumber: 0000:05:00.0
[    0.667728] hub 5-0:1.0: USB hub found
[    0.667739] hub 5-0:1.0: 2 ports detected
[    0.667836] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    0.667916] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6
[    0.667921] xhci_hcd 0000:05:00.0: Host supports USB 3.0 SuperSpeed
[    0.670792] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.670809] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.14
[    0.670811] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.670812] usb usb6: Product: xHCI Host Controller
[    0.670813] usb usb6: Manufacturer: Linux 5.14.17-301.fc35.x86_64 xhci-hcd
[    0.670814] usb usb6: SerialNumber: 0000:05:00.0
[    0.670913] hub 6-0:1.0: USB hub found
[    0.670922] hub 6-0:1.0: 2 ports detected
[    0.671012] usbcore: registered new interface driver usbserial_generic
[    0.671017] usbserial: USB Serial support registered for generic
[    0.671033] i8042: PNP: No PS/2 controller found.
[    0.671033] i8042: Probing ports directly.
[    0.673789] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.673793] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.673885] mousedev: PS/2 mouse device common for all mice
[    0.674033] rtc_cmos 00:02: RTC can wake from S4
[    0.674250] rtc_cmos 00:02: registered as rtc0
[    0.674311] rtc_cmos 00:02: setting system clock to 2021-11-18T16:49:58 UTC (1637254198)
[    0.674325] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.674465] device-mapper: uevent: version 1.0.3
[    0.674511] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    0.674567] intel_pstate: Intel P-state driver initializing
[    0.674920] hid: raw HID events driver (C) Jiri Kosina
[    0.674943] usbcore: registered new interface driver usbhid
[    0.674944] usbhid: USB HID core driver
[    0.675003] drop_monitor: Initializing network drop monitor service
[    0.675054] Initializing XFRM netlink socket
[    0.675122] NET: Registered PF_INET6 protocol family
[    0.888678] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.904676] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.931291] Freeing initrd memory: 31152K
[    0.934274] Segment Routing with IPv6
[    0.934276] RPL Segment Routing with IPv6
[    0.934298] mip6: Mobile IPv6
[    0.934300] NET: Registered PF_PACKET protocol family
[    0.934912] microcode: sig=0x206a7, pf=0x2, revision=0x2f
[    0.935037] microcode: Microcode Update Driver: v2.2.
[    0.935040] IPI shorthand broadcast: enabled
[    0.935044] AVX version of gcm_enc/dec engaged.
[    0.935123] AES CTR mode by8 optimization enabled
[    0.948682] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.948684] ata7: SATA link down (SStatus 0 SControl 300)
[    0.948735] ata9: SATA link down (SStatus 0 SControl 300)
[    0.948742] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.948749] ata8: SATA link down (SStatus 0 SControl 300)
[    0.948778] ata10: SATA link down (SStatus 0 SControl 300)
[    0.948973] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20210604/psargs-330)
[    0.948981] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT1._GTF due to previous error (AE_NOT_FOUND) (20210604/psparse-529)
[    0.949019] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT3._GTF.DSSP], AE_NOT_FOUND (20210604/psargs-330)
[    0.949024] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT3._GTF due to previous error (AE_NOT_FOUND) (20210604/psparse-529)
[    0.949051] ata4.00: supports DRM functions and may not be fully accessible
[    0.950287] ata2.00: ATA-9: SanDisk SDSSDA240G, U21010RL, max UDMA/133
[    0.950290] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    0.951489] sched_clock: Marking stable (946876492, 4605487)->(1075445786, -123963807)
[    0.951699] registered taskstats version 1
[    0.951930] Loading compiled-in X.509 certificates
[    0.952577] Loaded X.509 cert 'Fedora kernel signing key: 4ac27c3983f0d2796e89e1dbc9afd8e812d25336'
[    0.952639] zswap: loaded using pool lzo/zbud
[    0.952736] page_owner is disabled
[    0.952787] Key type ._fscrypt registered
[    0.952788] Key type .fscrypt registered
[    0.952789] Key type fscrypt-provisioning registered
[    0.953024] Btrfs loaded, crc32c=crc32c-generic, zoned=yes
[    0.953038] Key type big_key registered
[    0.954081] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20210604/psargs-330)
[    0.954086] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT1._GTF due to previous error (AE_NOT_FOUND) (20210604/psparse-529)
[    0.955754] Key type encrypted registered
[    0.955761] ima: No TPM chip found, activating TPM-bypass!
[    0.955763] Loading compiled-in module X.509 certificates
[    0.956334] Loaded X.509 cert 'Fedora kernel signing key: 4ac27c3983f0d2796e89e1dbc9afd8e812d25336'
[    0.956336] ima: Allocated hash algorithm: sha256
[    0.956344] ima: No architecture policies found
[    0.956352] evm: Initialising EVM extended attributes:
[    0.956353] evm: security.selinux
[    0.956353] evm: security.SMACK64 (disabled)
[    0.956354] evm: security.SMACK64EXEC (disabled)
[    0.956354] evm: security.SMACK64TRANSMUTE (disabled)
[    0.956355] evm: security.SMACK64MMAP (disabled)
[    0.956356] evm: security.apparmor (disabled)
[    0.956356] evm: security.ima
[    0.956357] evm: security.capability
[    0.956357] evm: HMAC attrs: 0x1
[    0.956565] PM:   Magic number: 13:867:843
[    0.956682] RAS: Correctable Errors collector initialized.
[    0.956716] ata4.00: disabling queued TRIM support
[    0.956718] ata4.00: ATA-9: Crucial_CT256MX100SSD1, MU01, max UDMA/133
[    0.956720] ata4.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.958393] ata2.00: configured for UDMA/133
[    0.958509] scsi 1:0:0:0: Direct-Access     ATA      SanDisk SDSSDA24 10RL PQ: 0 ANSI: 5
[    0.958607] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    0.958651] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    0.958660] sd 1:0:0:0: [sda] Write Protect is off
[    0.958662] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.958672] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.959108]  sda: sda1 sda2
[    0.967764] sd 1:0:0:0: [sda] Attached SCSI disk
[    0.973702] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT3._GTF.DSSP], AE_NOT_FOUND (20210604/psargs-330)
[    0.973713] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT3._GTF due to previous error (AE_NOT_FOUND) (20210604/psparse-529)
[    0.973760] ata4.00: supports DRM functions and may not be fully accessible
[    0.981452] ata4.00: disabling queued TRIM support
[    0.998135] ata4.00: configured for UDMA/133
[    0.998284] scsi 3:0:0:0: Direct-Access     ATA      Crucial_CT256MX1 MU01 PQ: 0 ANSI: 5
[    0.998402] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    0.998412] ata4.00: Enabling discard_zeroes_data
[    0.998459] sd 3:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    0.998461] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[    0.998466] sd 3:0:0:0: [sdb] Write Protect is off
[    0.998468] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    0.998477] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.998549] ata4.00: Enabling discard_zeroes_data
[    0.998742]  sdb: sdb1
[    0.998913] ata4.00: Enabling discard_zeroes_data
[    1.004927] sd 3:0:0:0: [sdb] supports TCG Opal
[    1.004932] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.006135] Freeing unused decrypted memory: 2036K
[    1.006456] Freeing unused kernel image (initmem) memory: 2872K
[    1.006482] Write protecting the kernel read-only data: 30720k
[    1.006763] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    1.006994] Freeing unused kernel image (rodata/data gap) memory: 1900K
[    1.017130] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    1.017133] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.017371] hub 1-1:1.0: USB hub found
[    1.017454] hub 1-1:1.0: 6 ports detected
[    1.033139] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    1.033142] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.033368] hub 2-1:1.0: USB hub found
[    1.033455] hub 2-1:1.0: 8 ports detected
[    1.044535] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.044538] rodata_test: all tests were successful
[    1.044539] x86/mm: Checking user space page tables
[    1.079984] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.079988] Run /init as init process
[    1.079989]   with arguments:
[    1.079990]     /init
[    1.079991]     rhgb
[    1.079991]   with environment:
[    1.079992]     HOME=/
[    1.079993]     TERM=linux
[    1.079993]     BOOT_IMAGE=(hd0,msdos1)/vmlinuz-5.14.17-301.fc35.x86_64
[    1.089130] systemd[1]: systemd v249.6-2.fc35 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    1.100789] systemd[1]: Detected architecture x86-64.
[    1.100792] systemd[1]: Running in initial RAM disk.
[    1.100830] systemd[1]: No hostname configured, using default hostname.
[    1.100894] systemd[1]: Hostname set to <fedora>.
[    1.160660] systemd[1]: Queued start job for default target Initrd Default Target.
[    1.160771] random: systemd: uninitialized urandom read (16 bytes read)
[    1.160784] systemd[1]: Reached target Initrd /usr File System.
[    1.160826] random: systemd: uninitialized urandom read (16 bytes read)
[    1.160832] systemd[1]: Reached target Local File Systems.
[    1.160850] random: systemd: uninitialized urandom read (16 bytes read)
[    1.160855] systemd[1]: Reached target Slice Units.
[    1.160871] systemd[1]: Reached target Swaps.
[    1.160887] systemd[1]: Reached target Timer Units.
[    1.160960] systemd[1]: Listening on D-Bus System Message Bus Socket.
[    1.161081] systemd[1]: Listening on Journal Audit Socket.
[    1.161161] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.161247] systemd[1]: Listening on Journal Socket.
[    1.161331] systemd[1]: Listening on udev Control Socket.
[    1.161400] systemd[1]: Listening on udev Kernel Socket.
[    1.161417] systemd[1]: Reached target Socket Units.
[    1.162580] systemd[1]: Starting Create List of Static Device Nodes...
[    1.162634] systemd[1]: Condition check resulted in Memstrack Anylazing Service being skipped.
[    1.163698] systemd[1]: Starting Journal Service...
[    1.164347] systemd[1]: Starting Load Kernel Modules...
[    1.164399] systemd[1]: Condition check resulted in Create System Users being skipped.
[    1.164938] systemd[1]: Starting Setup Virtual Console...
[    1.165472] systemd[1]: Finished Create List of Static Device Nodes.
[    1.166124] systemd[1]: Starting Create Static Device Nodes in /dev...
[    1.170379] systemd[1]: Finished Create Static Device Nodes in /dev.
[    1.206430] fuse: init (API version 7.34)
[    1.210432] IPMI message handler: version 39.2
[    1.211883] ipmi device interface
[    1.214165] systemd[1]: Started Journal Service.
[    1.214237] audit: type=1130 audit(1637254199.038:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.216052] ipmi_si: IPMI System Interface driver
[    1.216089] ipmi_si: Unable to find any System Interface(s)
[    1.221450] audit: type=1130 audit(1637254199.045:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.231773] audit: type=1130 audit(1637254199.056:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.243672] audit: type=1130 audit(1637254199.068:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline-ask comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.246504] audit: type=1130 audit(1637254199.070:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.251638] audit: type=1130 audit(1637254199.075:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.284733] audit: type=1130 audit(1637254199.109:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.301480] audit: type=1130 audit(1637254199.125:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.302188] audit: type=1334 audit(1637254199.126:10): prog-id=6 op=LOAD
[    1.310674] usb 2-1.5: new low-speed USB device number 3 using ehci-pci
[    1.382487] usb 2-1.5: New USB device found, idVendor=258a, idProduct=0001, bcdDevice= 1.00
[    1.382492] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.382493] usb 2-1.5: Product: USB KEYBOARD
[    1.382494] usb 2-1.5: Manufacturer: SINO WEALTH
[    1.386269] input: SINO WEALTH USB KEYBOARD as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:258A:0001.0001/input/input5
[    1.439801] hid-generic 0003:258A:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [SINO WEALTH USB KEYBOARD] on usb-0000:00:1d.0-1.5/input0
[    1.440389] e1000e: Intel(R) PRO/1000 Network Driver
[    1.440390] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.440668] tsc: Refined TSC clocksource calibration: 3411.129 MHz
[    1.440673] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x312b5ff9133, max_idle_ns: 440795267444 ns
[    1.443731] clocksource: Switched to clocksource tsc
[    1.443778] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.454786] input: SINO WEALTH USB KEYBOARD System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:258A:0001.0002/input/input6
[    1.464406] random: fast init done
[    1.465688] BTRFS: device label fedora_localhost-live devid 2 transid 217 /dev/sdb1 scanned by systemd-udevd (448)
[    1.470805] BTRFS: device label fedora_localhost-live devid 1 transid 217 /dev/sda2 scanned by systemd-udevd (445)
[    1.509754] input: SINO WEALTH USB KEYBOARD Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:258A:0001.0002/input/input7
[    1.509826] hid-generic 0003:258A:0001.0002: input,hiddev96,hidraw1: USB HID v1.10 Device [SINO WEALTH USB KEYBOARD] on usb-0000:00:1d.0-1.5/input1
[    1.531699] firewire_ohci 0000:07:01.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[    1.551038] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    1.577665] usb 2-1.6: new full-speed USB device number 4 using ehci-pci
[    1.647241] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 54:04:a6:6b:53:6b
[    1.647254] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.647304] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[    1.649311] e1000e 0000:00:19.0 eno1: renamed from eth0
[    1.663758] usb 2-1.6: New USB device found, idVendor=258a, idProduct=1007, bcdDevice= 1.00
[    1.663761] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.663762] usb 2-1.6: Product: Game Mouse
[    1.663763] usb 2-1.6: Manufacturer: SINOWEALTH
[    1.665019] input: SINOWEALTH Game Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:258A:1007.0003/input/input8
[    1.665138] hid-generic 0003:258A:1007.0003: input,hidraw2: USB HID v1.11 Mouse [SINOWEALTH Game Mouse] on usb-0000:00:1d.0-1.6/input0
[    1.667870] input: SINOWEALTH Game Mouse Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:258A:1007.0004/input/input9
[    1.719942] hid-generic 0003:258A:1007.0004: input,hiddev97,hidraw3: USB HID v1.11 Keyboard [SINOWEALTH Game Mouse] on usb-0000:00:1d.0-1.6/input1
[    1.771706] BTRFS info (device sda2): flagging fs with big metadata feature
[    1.771710] BTRFS info (device sda2): disk space caching is enabled
[    1.771712] BTRFS info (device sda2): has skinny extents
[    1.779130] BTRFS info (device sda2): enabling ssd optimizations
[    2.022371] systemd-journald[289]: Received SIGTERM from PID 1 (systemd).
[    2.039796] firewire_core 0000:07:01.0: created device fw0: GUID 001e8c00004e297a, S400
[    2.212079] SELinux:  policy capability network_peer_controls=1
[    2.212085] SELinux:  policy capability open_perms=1
[    2.212086] SELinux:  policy capability extended_socket_class=1
[    2.212088] SELinux:  policy capability always_check_network=0
[    2.212089] SELinux:  policy capability cgroup_seclabel=1
[    2.212090] SELinux:  policy capability nnp_nosuid_transition=1
[    2.212091] SELinux:  policy capability genfs_seclabel_symlinks=0
[    2.250661] systemd[1]: Successfully loaded SELinux policy in 95.753ms.
[    2.303949] systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 27.167ms.
[    2.306585] systemd[1]: systemd v249.7-2.fc35 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    2.318779] systemd[1]: Detected architecture x86-64.
[    2.355692] systemd-sysv-generator[587]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    2.355771] systemd-sysv-generator[587]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    3.723655] random: crng init done
[    3.723658] random: 7 urandom warning(s) missed due to ratelimiting
[    3.738334] zram: Added device: zram0
[    3.907870] systemd[1]: initrd-switch-root.service: Deactivated successfully.
[    3.908032] systemd[1]: Stopped Switch Root.
[    3.908379] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[    3.908660] systemd[1]: Created slice Slice /system/getty.
[    3.908936] systemd[1]: Created slice Slice /system/modprobe.
[    3.909207] systemd[1]: Created slice Slice /system/systemd-fsck.
[    3.909478] systemd[1]: Created slice Slice /system/systemd-zram-setup.
[    3.909769] systemd[1]: Created slice User and Session Slice.
[    3.909809] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[    3.909908] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.910241] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.910292] systemd[1]: Reached target Local Encrypted Volumes.
[    3.910327] systemd[1]: Reached target Login Prompts.
[    3.910364] systemd[1]: Stopped target Switch Root.
[    3.910396] systemd[1]: Stopped target Initrd File Systems.
[    3.910426] systemd[1]: Stopped target Initrd Root File System.
[    3.910487] systemd[1]: Reached target Slice Units.
[    3.910530] systemd[1]: Reached target Local Verity Protected Volumes.
[    3.910905] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    3.911631] systemd[1]: Listening on LVM2 poll daemon socket.
[    3.912717] systemd[1]: Listening on Process Core Dump Socket.
[    3.912838] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    3.913587] systemd[1]: Listening on udev Control Socket.
[    3.913868] systemd[1]: Listening on udev Kernel Socket.
[    3.914372] systemd[1]: Listening on User Database Manager Socket.
[    3.915286] systemd[1]: Mounting Huge Pages File System...
[    3.916214] systemd[1]: Mounting POSIX Message Queue File System...
[    3.917161] systemd[1]: Mounting Kernel Debug File System...
[    3.918146] systemd[1]: Mounting Kernel Trace File System...
[    3.918393] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[    3.919761] systemd[1]: Starting Create List of Static Device Nodes...
[    3.920553] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    3.921415] systemd[1]: Starting Load Kernel Module configfs...
[    3.922242] systemd[1]: Starting Load Kernel Module drm...
[    3.923132] systemd[1]: Starting Load Kernel Module fuse...
[    3.923923] systemd[1]: Starting Preprocess NFS configuration convertion...
[    3.924006] systemd[1]: plymouth-switch-root.service: Deactivated successfully.
[    3.924063] systemd[1]: Stopped Plymouth switch root service.
[    3.924316] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    3.924351] systemd[1]: systemd-fsck-root.service: Deactivated successfully.
[    3.924394] systemd[1]: Stopped File System Check on Root Device.
[    3.924516] systemd[1]: Stopped Journal Service.
[    3.926076] systemd[1]: Starting Journal Service...
[    3.927314] systemd[1]: Starting Load Kernel Modules...
[    3.928322] systemd[1]: Starting Remount Root and Kernel File Systems...
[    3.928485] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[    3.929826] systemd[1]: Starting Coldplug All udev Devices...
[    3.932316] systemd[1]: Mounted Huge Pages File System.
[    3.932538] systemd[1]: Mounted POSIX Message Queue File System.
[    3.932708] systemd[1]: Mounted Kernel Debug File System.
[    3.932899] systemd[1]: Mounted Kernel Trace File System.
[    3.933470] systemd[1]: Finished Create List of Static Device Nodes.
[    3.933870] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    3.934074] systemd[1]: Finished Load Kernel Module configfs.
[    3.934340] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    3.934499] systemd[1]: Finished Load Kernel Module drm.
[    3.934810] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    3.934970] systemd[1]: Finished Load Kernel Module fuse.
[    3.935357] BTRFS info (device sda2): use zstd compression, level 1
[    3.935360] BTRFS info (device sda2): disk space caching is enabled
[    3.935388] systemd[1]: nfs-convert.service: Deactivated successfully.
[    3.935585] systemd[1]: Finished Preprocess NFS configuration convertion.
[    3.936522] systemd[1]: Finished Remount Root and Kernel File Systems.
[    3.937645] systemd[1]: Mounting FUSE Control File System...
[    3.938641] systemd[1]: Mounting Kernel Configuration File System...
[    3.938763] systemd[1]: Condition check resulted in Special handling of early boot iSCSI sessions being skipped.
[    3.938797] ipmi_si: IPMI System Interface driver
[    3.938843] ipmi_si: Unable to find any System Interface(s)
[    3.938853] systemd[1]: Condition check resulted in OSTree Remount OS/ Bind Mounts being skipped.
[    3.938973] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[    3.939858] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    3.940771] systemd[1]: Starting Load/Save Random Seed...
[    3.940869] systemd[1]: Condition check resulted in Create System Users being skipped.
[    3.941759] systemd[1]: Starting Create Static Device Nodes in /dev...
[    3.942603] systemd[1]: Mounted FUSE Control File System.
[    3.942772] systemd[1]: Mounted Kernel Configuration File System.
[    3.947863] systemd[1]: Started Journal Service.
[    3.982067] systemd-journald[608]: Received client request to flush runtime journal.
[    4.371294] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    4.371522] i2c i2c-0: 4/4 memory slots populated (from DMI)
[    4.374834] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20210604/utaddress-204)
[    4.374842] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    4.374845] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20210604/utaddress-204)
[    4.374850] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20210604/utaddress-204)
[    4.374853] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    4.374855] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20210604/utaddress-204)
[    4.374859] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20210604/utaddress-204)
[    4.374863] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    4.374864] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20210604/utaddress-204)
[    4.374869] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20210604/utaddress-204)
[    4.374873] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    4.374874] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    4.376378] i2c i2c-0: Successfully instantiated SPD at 0x50
[    4.376932] i2c i2c-0: Successfully instantiated SPD at 0x51
[    4.377493] i2c i2c-0: Successfully instantiated SPD at 0x52
[    4.378133] i2c i2c-0: Successfully instantiated SPD at 0x53
[    4.411764] input: PC Speaker as /devices/platform/pcspkr/input/input11
[    4.500368] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[    4.500372] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    4.500374] RAPL PMU: hw unit of domain package 2^-16 Joules
[    4.532252] asus_wmi: ASUS WMI generic driver loaded
[    4.538046] asus_wmi: Initialization: 0x0
[    4.538080] asus_wmi: BIOS WMI version: 0.9
[    4.538137] asus_wmi: SFUN value: 0x0
[    4.538140] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[    4.538577] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input12
[    4.581904] zram0: detected capacity change from 0 to 16777216
[    4.601768] snd_hda_intel 0000:01:00.1: Disabling MSI
[    4.601775] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    4.615701] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    4.631190] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[    4.631262] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[    4.631325] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[    4.631390] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[    4.631449] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[    4.631506] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[    4.631563] input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[    4.664890] Adding 8388604k swap on /dev/zram0.  Priority:100 extents:1 across:8388604k SSDscFS
[    4.684002] iTCO_vendor_support: vendor-support=0
[    4.684011] at24 0-0050: supply vcc not found, using dummy regulator
[    4.684628] at24 0-0050: 256 byte spd EEPROM, read-only
[    4.684713] at24 0-0051: supply vcc not found, using dummy regulator
[    4.685294] at24 0-0051: 256 byte spd EEPROM, read-only
[    4.685322] at24 0-0052: supply vcc not found, using dummy regulator
[    4.685901] at24 0-0052: 256 byte spd EEPROM, read-only
[    4.685931] at24 0-0053: supply vcc not found, using dummy regulator
[    4.686516] at24 0-0053: 256 byte spd EEPROM, read-only
[    4.698079] iTCO_wdt iTCO_wdt.1.auto: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    4.698225] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
[    4.715405] intel_rapl_common: Found RAPL domain package
[    4.715410] intel_rapl_common: Found RAPL domain core
[    4.715415] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[    4.841888] RPC: Registered named UNIX socket transport module.
[    4.841891] RPC: Registered udp transport module.
[    4.841891] RPC: Registered tcp transport module.
[    4.841892] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    5.129496] NET: Registered PF_QIPCRTR protocol family
[    5.606649] snd_hda_intel 0000:00:1b.0: azx_get_response timeout, switching to polling mode: last cmd=0x300f0000
[    6.610655] snd_hda_intel 0000:00:1b.0: No response from codec, disabling MSI: last cmd=0x300f0000
[    7.612640] snd_hda_intel 0000:00:1b.0: Codec #3 probe error; disabling it...
[    7.642337] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    7.642342] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.642343] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    7.642344] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    7.642345] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x1e
[    7.642346] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    7.642347] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    7.642348] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    7.642349] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    7.657294] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[    7.657382] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[    7.657594] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[    7.657863] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[    7.658080] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24
[    7.658344] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25
[    7.658590] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26
[    7.658836] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27
[    8.472653] e1000e 0000:00:19.0 eno1: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[    8.472662] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO
[    8.472713] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[   12.842078] rfkill: input handler disabled
[ 1279.214676] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
[ 5733.242337] systemd-sysv-generator[7666]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 5733.242386] systemd-sysv-generator[7666]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
$ sudo dmidecode
# dmidecode 3.3
Getting SMBIOS data from sysfs.
SMBIOS 2.6 present.
109 structures occupying 3823 bytes.
Table at 0x000EB1D0.

Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
	Vendor: American Megatrends Inc.
	Version: 3602
	Release Date: 11/01/2012
	Address: 0xF0000
	Runtime Size: 64 kB
	ROM Size: 4 MB
	Characteristics:
		PCI is supported
		BIOS is upgradeable
		BIOS shadowing is allowed
		Boot from CD is supported
		Selectable boot is supported
		BIOS ROM is socketed
		EDD is supported
		5.25"/1.2 MB floppy services are supported (int 13h)
		3.5"/720 kB floppy services are supported (int 13h)
		3.5"/2.88 MB floppy services are supported (int 13h)
		Print screen service is supported (int 5h)
		8042 keyboard services are supported (int 9h)
		Serial services are supported (int 14h)
		Printer services are supported (int 17h)
		ACPI is supported
		USB legacy is supported
		BIOS boot specification is supported
		Targeted content distribution is supported
	BIOS Revision: 4.6

Handle 0x0001, DMI type 1, 27 bytes
System Information
	Manufacturer: System manufacturer
	Product Name: System Product Name
	Version: System Version
	Serial Number: System Serial Number
	UUID: 1e007460-008c-4e00-297a-5404a66b536b
	Wake-up Type: Power Switch
	SKU Number: SKU
	Family: To be filled by O.E.M.

Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
	Manufacturer: ASUSTeK Computer INC.
	Product Name: SABERTOOTH P67
	Version: Rev 1.xx
	Serial Number: MT7019K29201240
	Asset Tag: To be filled by O.E.M.
	Features:
		Board is a hosting board
		Board is replaceable
	Location In Chassis: To be filled by O.E.M.
	Chassis Handle: 0x0003
	Type: Motherboard
	Contained Object Handles: 0

Handle 0x0003, DMI type 3, 21 bytes
Chassis Information
	Manufacturer: Chassis Manufacture
	Type: Desktop
	Lock: Not Present
	Version: Chassis Version
	Serial Number: Chassis Serial Number
	Asset Tag: Asset-1234567890
	Boot-up State: Safe
	Power Supply State: Safe
	Thermal State: Safe
	Security Status: None
	OEM Information: 0x00000000
	Height: Unspecified
	Number Of Power Cords: 1
	Contained Elements: 0

Handle 0x0004, DMI type 4, 42 bytes
Processor Information
	Socket Designation: LGA1155
	Type: Central Processor
	Family: Core 2 Duo
	Manufacturer: Intel            
	ID: A7 06 02 00 FF FB EB BF
	Signature: Type 0, Family 6, Model 42, Stepping 7
	Flags:
		FPU (Floating-point unit on-chip)
		VME (Virtual mode extension)
		DE (Debugging extension)
		PSE (Page size extension)
		TSC (Time stamp counter)
		MSR (Model specific registers)
		PAE (Physical address extension)
		MCE (Machine check exception)
		CX8 (CMPXCHG8 instruction supported)
		APIC (On-chip APIC hardware supported)
		SEP (Fast system call)
		MTRR (Memory type range registers)
		PGE (Page global enable)
		MCA (Machine check architecture)
		CMOV (Conditional move instruction supported)
		PAT (Page attribute table)
		PSE-36 (36-bit page size extension)
		CLFSH (CLFLUSH instruction supported)
		DS (Debug store)
		ACPI (ACPI supported)
		MMX (MMX technology supported)
		FXSR (FXSAVE and FXSTOR instructions supported)
		SSE (Streaming SIMD extensions)
		SSE2 (Streaming SIMD extensions 2)
		SS (Self-snoop)
		HTT (Multi-threading)
		TM (Thermal monitor supported)
		PBE (Pending break enabled)
	Version: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz       
	Voltage: 1.0 V
	External Clock: 100 MHz
	Max Speed: 3800 MHz
	Current Speed: 3414 MHz
	Status: Populated, Enabled
	Upgrade: Other
	L1 Cache Handle: 0x0005
	L2 Cache Handle: 0x0006
	L3 Cache Handle: 0x0007
	Serial Number: To Be Filled By O.E.M.
	Asset Tag: To Be Filled By O.E.M.
	Part Number: To Be Filled By O.E.M.
	Core Count: 4
	Core Enabled: 1
	Thread Count: 2
	Characteristics:
		64-bit capable

Handle 0x0005, DMI type 7, 19 bytes
Cache Information
	Socket Designation: L1-Cache
	Configuration: Enabled, Not Socketed, Level 1
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 256 kB
	Maximum Size: 256 kB
	Supported SRAM Types:
		Other
	Installed SRAM Type: Other
	Speed: Unknown
	Error Correction Type: None
	System Type: Unified
	Associativity: 8-way Set-associative

Handle 0x0006, DMI type 7, 19 bytes
Cache Information
	Socket Designation: L2-Cache
	Configuration: Enabled, Not Socketed, Level 2
	Operational Mode: Varies With Memory Address
	Location: Internal
	Installed Size: 1 MB
	Maximum Size: 1 MB
	Supported SRAM Types:
		Other
	Installed SRAM Type: Other
	Speed: Unknown
	Error Correction Type: None
	System Type: Unified
	Associativity: 8-way Set-associative

Handle 0x0007, DMI type 7, 19 bytes
Cache Information
	Socket Designation: L3-Cache
	Configuration: Disabled, Not Socketed, Level 3
	Operational Mode: Unknown
	Location: Internal
	Installed Size: 8 MB
	Maximum Size: 8 MB
	Supported SRAM Types:
		Other
	Installed SRAM Type: Other
	Speed: Unknown
	Error Correction Type: None
	System Type: Unified
	Associativity: 16-way Set-associative

Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB1_2
	Internal Connector Type: None
	External Reference Designator: USB1_2
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB3_4
	Internal Connector Type: None
	External Reference Designator: USB3_4
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB5_6
	Internal Connector Type: None
	External Reference Designator: USB5_6
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB3_12
	Internal Connector Type: None
	External Reference Designator: USB3_12
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: ESATA3G
	Internal Connector Type: None
	External Reference Designator: ESATA3G
	External Connector Type: SAS/SATA Plug Receptacle
	Port Type: SATA

Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: GbE LAN
	Internal Connector Type: None
	External Reference Designator: GbE LAN
	External Connector Type: RJ-45
	Port Type: Network Port

Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: AUDIO
	Internal Connector Type: None
	External Reference Designator: AUDIO
	External Connector Type: Other
	Port Type: Audio Port

Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SATA6G_1
	Internal Connector Type: SAS/SATA Plug Receptacle
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: SATA

Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SATA6G_2
	Internal Connector Type: SAS/SATA Plug Receptacle
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: SATA

Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SATA6G_E1
	Internal Connector Type: SAS/SATA Plug Receptacle
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: SATA

Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SATA6G_E2
	Internal Connector Type: SAS/SATA Plug Receptacle
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: SATA

Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SATA3G_3
	Internal Connector Type: SAS/SATA Plug Receptacle
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: SATA

Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SATA3G_4
	Internal Connector Type: SAS/SATA Plug Receptacle
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: SATA

Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SATA3G_5
	Internal Connector Type: SAS/SATA Plug Receptacle
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: SATA

Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SATA3G_6
	Internal Connector Type: SAS/SATA Plug Receptacle
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: SATA

Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB7_8
	Internal Connector Type: Access Bus (USB)
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: USB

Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB9_10
	Internal Connector Type: Access Bus (USB)
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: USB

Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB11_12
	Internal Connector Type: Access Bus (USB)
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: USB

Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB3_34
	Internal Connector Type: Access Bus (USB)
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: USB

Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: AAFP
	Internal Connector Type: Mini Jack (headphones)
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Audio Port

Handle 0x001C, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: IE1394_1
	Internal Connector Type: IEEE 1394
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Firewire (IEEE P1394)

Handle 0x001D, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: IE1394_2
	Internal Connector Type: IEEE 1394
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Firewire (IEEE P1394)

Handle 0x001E, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: CPU_FAN
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x001F, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: CPU_FAN_OPT
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x0020, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: CHA_FAN1
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x0021, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: CHA_FAN2
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x0022, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: PWR_FAN1
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x0023, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: PWR_FAN2
	Internal Connector Type: Other
	External Reference Designator: Not Specified
	External Connector Type: None
	Port Type: Other

Handle 0x0024, DMI type 9, 17 bytes
System Slot Information
	Designation: PCIEX1_1
	Type: 32-bit PCI Express
	Current Usage: Available
	Length: Short
	ID: 1
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported
	Bus Address: 0000:ff:1c.0

Handle 0x0025, DMI type 9, 17 bytes
System Slot Information
	Designation: PCIEX16_1
	Type: 32-bit PCI Express
	Current Usage: In Use
	Length: Short
	ID: 2
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported
	Bus Address: 0000:01:01.0

Handle 0x0026, DMI type 9, 17 bytes
System Slot Information
	Designation: PCIEX1_2
	Type: 32-bit PCI Express
	Current Usage: Available
	Length: Short
	ID: 3
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported
	Bus Address: 0000:03:1c.1

Handle 0x0027, DMI type 9, 17 bytes
System Slot Information
	Designation: PCIEX1_3
	Type: 32-bit PCI
	Current Usage: Available
	Length: Short
	ID: 4
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported
	Bus Address: 0000:07:1c.2

Handle 0x0028, DMI type 9, 17 bytes
System Slot Information
	Designation: PCIEX16_2
	Type: 32-bit PCI Express
	Current Usage: Available
	Length: Short
	ID: 5
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported
	Bus Address: 0000:ff:01.1

Handle 0x0029, DMI type 9, 17 bytes
System Slot Information
	Designation: PCI1
	Type: 32-bit PCI
	Current Usage: In Use
	Length: Short
	ID: 6
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported
	Bus Address: 0000:07:1c.6

Handle 0x002A, DMI type 10, 6 bytes
On Board Device Information
	Type: Ethernet
	Status: Enabled
	Description: Onboard Ethernet

Handle 0x002B, DMI type 11, 5 bytes
OEM Strings
	String 1: To Be Filled By O.E.M.
	String 2: To Be Filled By O.E.M.
	String 3: To Be Filled By O.E.M.
	String 4: To Be Filled By O.E.M.

Handle 0x002C, DMI type 12, 5 bytes
System Configuration Options
	Option 1: To Be Filled By O.E.M.

Handle 0x002D, DMI type 32, 20 bytes
System Boot Information
	Status: No errors detected

Handle 0x002E, DMI type 34, 11 bytes
Management Device
	Description: Nuvoton NCT6776F
	Type: Other
	Address: 0x00000295
	Address Type: I/O Port

Handle 0x002F, DMI type 26, 22 bytes
Voltage Probe
	Description: LM78A
	Location: <OUT OF SPEC>
	Status: <OUT OF SPEC>
	Maximum Value: Unknown
	Minimum Value: Unknown
	Resolution: Unknown
	Tolerance: Unknown
	Accuracy: Unknown
	OEM-specific Information: 0x00000000
	Nominal Value: Unknown

Handle 0x0030, DMI type 36, 16 bytes
Management Device Threshold Data
	Lower Non-critical Threshold: 1
	Upper Non-critical Threshold: 2
	Lower Critical Threshold: 3
	Upper Critical Threshold: 4
	Lower Non-recoverable Threshold: 5
	Upper Non-recoverable Threshold: 6

Handle 0x0031, DMI type 35, 11 bytes
Management Device Component
	Description: To Be Filled By O.E.M.
	Management Device Handle: 0x002E
	Component Handle: 0x002E
	Threshold Handle: 0x002F

Handle 0x0032, DMI type 28, 22 bytes
Temperature Probe
	Description: LM78A
	Location: <OUT OF SPEC>
	Status: <OUT OF SPEC>
	Maximum Value: Unknown
	Minimum Value: Unknown
	Resolution: Unknown
	Tolerance: Unknown
	Accuracy: Unknown
	OEM-specific Information: 0x00000000
	Nominal Value: Unknown

Handle 0x0033, DMI type 36, 16 bytes
Management Device Threshold Data
	Lower Non-critical Threshold: 1
	Upper Non-critical Threshold: 2
	Lower Critical Threshold: 3
	Upper Critical Threshold: 4
	Lower Non-recoverable Threshold: 5
	Upper Non-recoverable Threshold: 6

Handle 0x0034, DMI type 35, 11 bytes
Management Device Component
	Description: To Be Filled By O.E.M.
	Management Device Handle: 0x002E
	Component Handle: 0x0031
	Threshold Handle: 0x0032

Handle 0x0035, DMI type 27, 14 bytes
Cooling Device
	Temperature Probe Handle: 0x0032
	Type: <OUT OF SPEC>
	Status: <OUT OF SPEC>
	Cooling Unit Group: 1
	OEM-specific Information: 0x00000000
	Nominal Speed: Unknown Or Non-rotating

Handle 0x0036, DMI type 36, 16 bytes
Management Device Threshold Data
	Lower Non-critical Threshold: 1
	Upper Non-critical Threshold: 2
	Lower Critical Threshold: 3
	Upper Critical Threshold: 4
	Lower Non-recoverable Threshold: 5
	Upper Non-recoverable Threshold: 6

Handle 0x0037, DMI type 35, 11 bytes
Management Device Component
	Description: To Be Filled By O.E.M.
	Management Device Handle: 0x002E
	Component Handle: 0x0034
	Threshold Handle: 0x0035

Handle 0x0038, DMI type 27, 14 bytes
Cooling Device
	Temperature Probe Handle: 0x0032
	Type: <OUT OF SPEC>
	Status: <OUT OF SPEC>
	Cooling Unit Group: 1
	OEM-specific Information: 0x00000000
	Nominal Speed: Unknown Or Non-rotating

Handle 0x0039, DMI type 36, 16 bytes
Management Device Threshold Data
	Lower Non-critical Threshold: 1
	Upper Non-critical Threshold: 2
	Lower Critical Threshold: 3
	Upper Critical Threshold: 4
	Lower Non-recoverable Threshold: 5
	Upper Non-recoverable Threshold: 6

Handle 0x003A, DMI type 35, 11 bytes
Management Device Component
	Description: To Be Filled By O.E.M.
	Management Device Handle: 0x002E
	Component Handle: 0x0037
	Threshold Handle: 0x0038

Handle 0x003B, DMI type 29, 22 bytes
Electrical Current Probe
	Description: ABC
	Location: <OUT OF SPEC>
	Status: <OUT OF SPEC>
	Maximum Value: Unknown
	Minimum Value: Unknown
	Resolution: Unknown
	Tolerance: Unknown
	Accuracy: Unknown
	OEM-specific Information: 0x00000000
	Nominal Value: Unknown

Handle 0x003C, DMI type 36, 16 bytes
Management Device Threshold Data

Handle 0x003D, DMI type 35, 11 bytes
Management Device Component
	Description: To Be Filled By O.E.M.
	Management Device Handle: 0x002E
	Component Handle: 0x003A
	Threshold Handle: 0x0038

Handle 0x003E, DMI type 39, 22 bytes
System Power Supply
	Power Unit Group: 1
	Location: To Be Filled By O.E.M.
	Name: To Be Filled By O.E.M.
	Manufacturer: To Be Filled By O.E.M.
	Serial Number: To Be Filled By O.E.M.
	Asset Tag: To Be Filled By O.E.M.
	Model Part Number: To Be Filled By O.E.M.
	Revision: To Be Filled By O.E.M.
	Max Power Capacity: Unknown
	Status: Not Present
	Type: <OUT OF SPEC>
	Input Voltage Range Switching: <OUT OF SPEC>
	Plugged: Yes
	Hot Replaceable: No
	Input Voltage Probe Handle: 0x002F
	Cooling Device Handle: 0x0035
	Input Current Probe Handle: 0x003B

Handle 0x003F, DMI type 34, 16 bytes
Invalid entry length (16). Fixed up to 11.
Management Device
	Description: LM78-2
	Type: LM78
	Address: 0x00000000
	Address Type: I/O Port

Handle 0x0040, DMI type 26, 22 bytes
Voltage Probe
	Description: LM78B
	Location: <OUT OF SPEC>
	Status: <OUT OF SPEC>
	Maximum Value: Unknown
	Minimum Value: Unknown
	Resolution: Unknown
	Tolerance: Unknown
	Accuracy: Unknown
	OEM-specific Information: 0x00000000
	Nominal Value: Unknown

Handle 0x0041, DMI type 36, 16 bytes
Management Device Threshold Data
	Lower Non-critical Threshold: 7
	Upper Non-critical Threshold: 8
	Lower Critical Threshold: 8
	Upper Critical Threshold: 10
	Lower Non-recoverable Threshold: 11
	Upper Non-recoverable Threshold: 12

Handle 0x0042, DMI type 35, 11 bytes
Management Device Component
	Description: To Be Filled By O.E.M.
	Management Device Handle: 0x003F
	Component Handle: 0x003F
	Threshold Handle: 0x0040

Handle 0x0043, DMI type 26, 22 bytes
Voltage Probe
	Description: LM78B
	Location: <OUT OF SPEC>
	Status: <OUT OF SPEC>
	Maximum Value: Unknown
	Minimum Value: Unknown
	Resolution: Unknown
	Tolerance: Unknown
	Accuracy: Unknown
	OEM-specific Information: 0x00000000
	Nominal Value: Unknown

Handle 0x0044, DMI type 36, 16 bytes
Management Device Threshold Data
	Lower Non-critical Threshold: 13
	Upper Non-critical Threshold: 14
	Lower Critical Threshold: 15
	Upper Critical Threshold: 16
	Lower Non-recoverable Threshold: 17
	Upper Non-recoverable Threshold: 18

Handle 0x0045, DMI type 35, 11 bytes
Management Device Component
	Description: To Be Filled By O.E.M.
	Management Device Handle: 0x003F
	Component Handle: 0x0042
	Threshold Handle: 0x0043

Handle 0x0046, DMI type 28, 22 bytes
Temperature Probe
	Description: LM78B
	Location: <OUT OF SPEC>
	Status: <OUT OF SPEC>
	Maximum Value: Unknown
	Minimum Value: Unknown
	Resolution: Unknown
	Tolerance: Unknown
	Accuracy: Unknown
	OEM-specific Information: 0x00000000
	Nominal Value: Unknown

Handle 0x0047, DMI type 36, 16 bytes
Management Device Threshold Data
	Lower Non-critical Threshold: 1
	Upper Non-critical Threshold: 2
	Lower Critical Threshold: 3
	Upper Critical Threshold: 4
	Lower Non-recoverable Threshold: 5
	Upper Non-recoverable Threshold: 6

Handle 0x0048, DMI type 35, 11 bytes
Management Device Component
	Description: To Be Filled By O.E.M.
	Management Device Handle: 0x003F
	Component Handle: 0x0045
	Threshold Handle: 0x0046

Handle 0x0049, DMI type 27, 14 bytes
Cooling Device
	Temperature Probe Handle: 0x0046
	Type: <OUT OF SPEC>
	Status: <OUT OF SPEC>
	Cooling Unit Group: 1
	OEM-specific Information: 0x00000000
	Nominal Speed: Unknown Or Non-rotating

Handle 0x004A, DMI type 36, 16 bytes
Management Device Threshold Data
	Lower Non-critical Threshold: 1
	Upper Non-critical Threshold: 2
	Lower Critical Threshold: 3
	Upper Critical Threshold: 4
	Lower Non-recoverable Threshold: 5
	Upper Non-recoverable Threshold: 6

Handle 0x004B, DMI type 35, 11 bytes
Management Device Component
	Description: To Be Filled By O.E.M.
	Management Device Handle: 0x003F
	Component Handle: 0x0048
	Threshold Handle: 0x0049

Handle 0x004C, DMI type 28, 22 bytes
Temperature Probe
	Description: LM78B
	Location: <OUT OF SPEC>
	Status: <OUT OF SPEC>
	Maximum Value: Unknown
	Minimum Value: Unknown
	Resolution: Unknown
	Tolerance: Unknown
	Accuracy: Unknown
	OEM-specific Information: 0x00000000
	Nominal Value: Unknown

Handle 0x004D, DMI type 36, 16 bytes
Management Device Threshold Data
	Lower Non-critical Threshold: 1
	Upper Non-critical Threshold: 2
	Lower Critical Threshold: 3
	Upper Critical Threshold: 4
	Lower Non-recoverable Threshold: 5
	Upper Non-recoverable Threshold: 6

Handle 0x004E, DMI type 35, 11 bytes
Management Device Component
	Description: To Be Filled By O.E.M.
	Management Device Handle: 0x003F
	Component Handle: 0x004B
	Threshold Handle: 0x004C

Handle 0x004F, DMI type 27, 14 bytes
Cooling Device
	Temperature Probe Handle: 0x004C
	Type: <OUT OF SPEC>
	Status: <OUT OF SPEC>
	Cooling Unit Group: 1
	OEM-specific Information: 0x00000000
	Nominal Speed: Unknown Or Non-rotating

Handle 0x0050, DMI type 36, 16 bytes
Management Device Threshold Data
	Lower Non-critical Threshold: 1
	Upper Non-critical Threshold: 2
	Lower Critical Threshold: 3
	Upper Critical Threshold: 4
	Lower Non-recoverable Threshold: 5
	Upper Non-recoverable Threshold: 6

Handle 0x0051, DMI type 35, 11 bytes
Management Device Component
	Description: To Be Filled By O.E.M.
	Management Device Handle: 0x003F
	Component Handle: 0x004E
	Threshold Handle: 0x004F

Handle 0x0052, DMI type 29, 22 bytes
Electrical Current Probe
	Description: DEF
	Location: <OUT OF SPEC>
	Status: <OUT OF SPEC>
	Maximum Value: Unknown
	Minimum Value: Unknown
	Resolution: Unknown
	Tolerance: Unknown
	Accuracy: Unknown
	OEM-specific Information: 0x00000000
	Nominal Value: Unknown

Handle 0x0053, DMI type 36, 16 bytes
Management Device Threshold Data

Handle 0x0054, DMI type 35, 11 bytes
Management Device Component
	Description: To Be Filled By O.E.M.
	Management Device Handle: 0x003F
	Component Handle: 0x0051
	Threshold Handle: 0x004F

Handle 0x0055, DMI type 29, 22 bytes
Electrical Current Probe
	Description: GHI
	Location: <OUT OF SPEC>
	Status: <OUT OF SPEC>
	Maximum Value: Unknown
	Minimum Value: Unknown
	Resolution: Unknown
	Tolerance: Unknown
	Accuracy: Unknown
	OEM-specific Information: 0x00000000
	Nominal Value: Unknown

Handle 0x0056, DMI type 36, 16 bytes
Management Device Threshold Data

Handle 0x0057, DMI type 35, 11 bytes
Management Device Component
	Description: To Be Filled By O.E.M.
	Management Device Handle: 0x003F
	Component Handle: 0x0054
	Threshold Handle: 0x004F

Handle 0x0058, DMI type 39, 22 bytes
System Power Supply
	Power Unit Group: 1
	Location: To Be Filled By O.E.M.
	Name: To Be Filled By O.E.M.
	Manufacturer: To Be Filled By O.E.M.
	Serial Number: To Be Filled By O.E.M.
	Asset Tag: To Be Filled By O.E.M.
	Model Part Number: To Be Filled By O.E.M.
	Revision: To Be Filled By O.E.M.
	Max Power Capacity: Unknown
	Status: Not Present
	Type: <OUT OF SPEC>
	Input Voltage Range Switching: <OUT OF SPEC>
	Plugged: Yes
	Hot Replaceable: No
	Input Voltage Probe Handle: 0x002F
	Cooling Device Handle: 0x0035
	Input Current Probe Handle: 0x003B

Handle 0x0059, DMI type 41, 11 bytes
Onboard Device
	Reference Designation:  Onboard IGD
	Type: Video
	Status: Enabled
	Type Instance: 1
	Bus Address: 0000:00:02.0

Handle 0x005A, DMI type 41, 11 bytes
Onboard Device
	Reference Designation:  Onboard LAN
	Type: Ethernet
	Status: Enabled
	Type Instance: 1
	Bus Address: 0000:00:19.0

Handle 0x005B, DMI type 41, 11 bytes
Onboard Device
	Reference Designation:  Onboard 1394
	Type: Other
	Status: Enabled
	Type Instance: 1
	Bus Address: 0000:03:1c.2

Handle 0x005C, DMI type 139, 54 bytes
OEM-specific Type
	Header and Data:
		8B 36 5C 00 00 1E 8C 00 00 4E 29 7A 04 04 32 55
		F8 00 A2 02 A1 00 40 63 43 10 FE 81 03 DF 40 B2
		00 20 00 73 3C 10 08 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 01
	Strings:
		V1394GUID

Handle 0x005E, DMI type 16, 15 bytes
Physical Memory Array
	Location: System Board Or Motherboard
	Use: System Memory
	Error Correction Type: None
	Maximum Capacity: 32 GB
	Error Information Handle: 0x0060
	Number Of Devices: 4

Handle 0x005D, DMI type 17, 28 bytes
Memory Device
	Array Handle: 0x005E
	Error Information Handle: 0x0061
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 4 GB
	Form Factor: DIMM
	Set: None
	Locator: ChannelA-DIMM0
	Bank Locator: BANK 0
	Type: DDR3
	Type Detail: Synchronous
	Speed: 1600 MT/s
	Manufacturer: Kingston
	Serial Number: 8A261D28
	Asset Tag: 9876543210
	Part Number: 9905403-439.A00LF 
	Rank: 2

Handle 0x0060, DMI type 18, 23 bytes
32-bit Memory Error Information
	Type: OK
	Granularity: Unknown
	Operation: Unknown
	Vendor Syndrome: Unknown
	Memory Array Address: Unknown
	Device Address: Unknown
	Resolution: Unknown

Handle 0x005F, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x000FFFFFFFF
	Range Size: 4 GB
	Physical Device Handle: 0x005D
	Memory Array Mapped Address Handle: 0x0069
	Partition Row Position: Unknown
	Interleave Position: 1
	Interleaved Data Depth: 2

Handle 0x0062, DMI type 17, 28 bytes
Memory Device
	Array Handle: 0x005E
	Error Information Handle: No Error
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 4 GB
	Form Factor: DIMM
	Set: None
	Locator: ChannelA-DIMM1
	Bank Locator: BANK 1
	Type: DDR3
	Type Detail: Synchronous
	Speed: 1600 MT/s
	Manufacturer: Kingston
	Serial Number: 651441D4
	Asset Tag: 9876543210
	Part Number: KHX1600C9D3/4GX   
	Rank: 1

Handle 0x0061, DMI type 18, 23 bytes
32-bit Memory Error Information
	Type: OK
	Granularity: Unknown
	Operation: Unknown
	Vendor Syndrome: Unknown
	Memory Array Address: Unknown
	Device Address: Unknown
	Resolution: Unknown

Handle 0x0064, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x00200000000
	Ending Address: 0x002FFFFFFFF
	Range Size: 4 GB
	Physical Device Handle: 0x0062
	Memory Array Mapped Address Handle: 0x0069
	Partition Row Position: Unknown
	Interleave Position: 1
	Interleaved Data Depth: 2

Handle 0x0063, DMI type 17, 28 bytes
Memory Device
	Array Handle: 0x005E
	Error Information Handle: 0x0066
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 4 GB
	Form Factor: DIMM
	Set: None
	Locator: ChannelB-DIMM0
	Bank Locator: BANK 2
	Type: DDR3
	Type Detail: Synchronous
	Speed: 1600 MT/s
	Manufacturer: Kingston
	Serial Number: 8B260228
	Asset Tag: 9876543210
	Part Number: 9905403-439.A00LF 
	Rank: 2

Handle 0x0066, DMI type 18, 23 bytes
32-bit Memory Error Information
	Type: OK
	Granularity: Unknown
	Operation: Unknown
	Vendor Syndrome: Unknown
	Memory Array Address: Unknown
	Device Address: Unknown
	Resolution: Unknown

Handle 0x0065, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x00100000000
	Ending Address: 0x001FFFFFFFF
	Range Size: 4 GB
	Physical Device Handle: 0x0063
	Memory Array Mapped Address Handle: 0x0069
	Partition Row Position: Unknown
	Interleave Position: 2
	Interleaved Data Depth: 2

Handle 0x0068, DMI type 17, 28 bytes
Memory Device
	Array Handle: 0x005E
	Error Information Handle: No Error
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 4 GB
	Form Factor: DIMM
	Set: None
	Locator: ChannelB-DIMM1
	Bank Locator: BANK 3
	Type: DDR3
	Type Detail: Synchronous
	Speed: 1600 MT/s
	Manufacturer: Kingston
	Serial Number: 6C1411D4
	Asset Tag: 9876543210
	Part Number: KHX1600C9D3/4GX   
	Rank: 1

Handle 0x0067, DMI type 18, 23 bytes
32-bit Memory Error Information
	Type: OK
	Granularity: Unknown
	Operation: Unknown
	Vendor Syndrome: Unknown
	Memory Array Address: Unknown
	Device Address: Unknown
	Resolution: Unknown

Handle 0x006A, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x00300000000
	Ending Address: 0x003FFFFFFFF
	Range Size: 4 GB
	Physical Device Handle: 0x0068
	Memory Array Mapped Address Handle: 0x0069
	Partition Row Position: Unknown
	Interleave Position: 2
	Interleaved Data Depth: 2

Handle 0x0069, DMI type 19, 15 bytes
Memory Array Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x003FFFFFFFF
	Range Size: 16 GB
	Physical Array Handle: 0x005E
	Partition Width: 4

Handle 0x006B, DMI type 13, 22 bytes
BIOS Language Information
	Language Description Format: Abbreviated
	Installable Languages: 6
		en-
		fr-
		de-
		ja-
		zh-
		chs
	Currently Installed Language: en-

Handle 0x006C, DMI type 127, 4 bytes
End Of Table

Long poost et merci d'avance

Dernière modification par bruno09 (18/11/2021 23:18:40)


Fedora 35 Workstation - AMD Ryzen 5600X - CM Gigabyte B550 AORUS Elite V2 - SSD Crucial P5 M.2 PCIe NVMe 1 To - 32Go Ram DDR4 2666Mhz Kingston HYPER X Fury - CG Nvidia GTX 970 4GB MSI - IIYAMA Curved 34" UWHD (3440x1440) (144 Hz) Display Port.

Hors ligne

#2 19/11/2021 00:55:42

Yannick@ekiga
Membre
Inscription : 18/12/2013
Messages : 182

Re : [Résolu] Carte graphique HS?

Une petite idée rapide : essaie le live CD de pop-os version nvidia : les pilotes sont déjà installés, ça permettra peut-être de vérifier si c'est un soucis matériel ?
https://pop.system76.com/

Hors ligne

#3 19/11/2021 10:45:12

Refuznik
Membre
Inscription : 31/01/2007
Messages : 7 994

Re : [Résolu] Carte graphique HS?

Peux tu me donner le grub que tu utilises et principalement la ligne avec le driver nvidia ?

Hors ligne

#4 19/11/2021 11:16:51

winmandrake
Rédacteur Wiki
Rédacteur Wiki
Inscription : 08/07/2008
Messages : 1 300

Re : [Résolu] Carte graphique HS?

Attention, la dernière version (495.44) ne prend plus en charge les série 600 : https://www.nvidia.fr/Download/driverRe … /181509/fr
Les derniers que tu puisse utilisé sont les 490.144

Dernière modification par winmandrake (19/11/2021 11:22:52)


Mon pc : AMD R5-2400G sur Asus Prime B450M-A, 16 Go ram, Nvidia 1050Ti (4Go), SSD Samsung 850 EVO (250 Go) + black caviar de 1To.

Hors ligne

#5 19/11/2021 19:35:43

bruno09
Membre
Lieu : Ariège
Inscription : 21/10/2020
Messages : 42

Re : [Résolu] Carte graphique HS?

Yannick@ekiga a écrit :

Une petite idée rapide : essaie le live CD de pop-os version nvidia : les pilotes sont déjà installés, ça permettra peut-être de vérifier si c'est un soucis matériel ?
https://pop.system76.com/

salut et merci pour la piste, j'ai donc utilisé le livecd avec drivers nvidia (c'est le 465.xx)
a l'initialisation une police enorme, puis une fois sur le bureau résolution de 800, pas d’accélération et le même A propos que sous Fedora
Carte graphique : llvmpipe (LLVM 13.0.0, 256 bits)

J'ai vais essayer aussi avec une manjaro pour voir

pas bon signe tout ça


Fedora 35 Workstation - AMD Ryzen 5600X - CM Gigabyte B550 AORUS Elite V2 - SSD Crucial P5 M.2 PCIe NVMe 1 To - 32Go Ram DDR4 2666Mhz Kingston HYPER X Fury - CG Nvidia GTX 970 4GB MSI - IIYAMA Curved 34" UWHD (3440x1440) (144 Hz) Display Port.

Hors ligne

#6 19/11/2021 19:39:44

bruno09
Membre
Lieu : Ariège
Inscription : 21/10/2020
Messages : 42

Re : [Résolu] Carte graphique HS?

winmandrake a écrit :

Attention, la dernière version (495.44) ne prend plus en charge les série 600 : https://www.nvidia.fr/Download/driverRe … /181509/fr
Les derniers que tu puisse utilisé sont les 490.144

Bien vu :)
j’hésite pour l'instant de le tester au risque de ne plus pouvoir utiliser correctement le pc, faudrait aumoins que j'arrive a tourner sur nouveau

Merci pour l'info


Fedora 35 Workstation - AMD Ryzen 5600X - CM Gigabyte B550 AORUS Elite V2 - SSD Crucial P5 M.2 PCIe NVMe 1 To - 32Go Ram DDR4 2666Mhz Kingston HYPER X Fury - CG Nvidia GTX 970 4GB MSI - IIYAMA Curved 34" UWHD (3440x1440) (144 Hz) Display Port.

Hors ligne

#7 19/11/2021 19:59:00

bruno09
Membre
Lieu : Ariège
Inscription : 21/10/2020
Messages : 42

Re : [Résolu] Carte graphique HS?

Refuznik a écrit :

Peux tu me donner le grub que tu utilises et principalement la ligne avec le driver nvidia ?

Bonsoir,
je pense que j'utilise le grub installé par defaut avec le livecd Fedora 35, (grub2?)

Pourrais-tu m'indiquer ou trouver les infos que tu demande? (fichier, cmd?)

sur cette réinstallation que j'ai fait en mode video basic, je ne suis même pas avec nouveau, si au moins je tourne sur nouveau, ça veut peut etre dire que la cg n'est peut être pas morte, qu'elle est encore correctement reconnu


Fedora 35 Workstation - AMD Ryzen 5600X - CM Gigabyte B550 AORUS Elite V2 - SSD Crucial P5 M.2 PCIe NVMe 1 To - 32Go Ram DDR4 2666Mhz Kingston HYPER X Fury - CG Nvidia GTX 970 4GB MSI - IIYAMA Curved 34" UWHD (3440x1440) (144 Hz) Display Port.

Hors ligne

#8 19/11/2021 20:23:08

bruno09
Membre
Lieu : Ariège
Inscription : 21/10/2020
Messages : 42

Re : [Résolu] Carte graphique HS?

Bon je viens de tenter une install avec une manjaro en bootant avec les drivers opensource,

j'ai eu une belle initialisation a la bonne résolution, de la couleur, puis une fois sur le bureau, je n'avais que la souris et plein d'arctefacts graphique impossible de cliquer nulle part.
Bilan je pense que la carte est HS, surtout que cela s'est passé fonctionnement.


Fedora 35 Workstation - AMD Ryzen 5600X - CM Gigabyte B550 AORUS Elite V2 - SSD Crucial P5 M.2 PCIe NVMe 1 To - 32Go Ram DDR4 2666Mhz Kingston HYPER X Fury - CG Nvidia GTX 970 4GB MSI - IIYAMA Curved 34" UWHD (3440x1440) (144 Hz) Display Port.

Hors ligne

#9 19/11/2021 21:44:02

Rhodry
Membre
Inscription : 11/08/2020
Messages : 34

Re : [Résolu] Carte graphique HS?

Fedora 35 supporte les drivers propriétaires NVidia avec un wayland amélioré.
Avez vous essayé de vous logger sous wayland ?

Hors ligne

#10 20/11/2021 00:21:13

winmandrake
Rédacteur Wiki
Rédacteur Wiki
Inscription : 08/07/2008
Messages : 1 300

Re : [Résolu] Carte graphique HS?

bruno09 a écrit :

Bon je viens de tenter une install avec une manjaro en bootant avec les drivers opensource,

j'ai eu une belle initialisation a la bonne résolution, de la couleur, puis une fois sur le bureau, je n'avais que la souris et plein d'arctefacts graphique impossible de cliquer nulle part.
Bilan je pense que la carte est HS, surtout que cela s'est passé fonctionnement.

Effectivement, ça sent la carte HS. Malheureusement pour toi vu les prix pratiqués sur les neuves... rabat toi sur une d'occasion si tu trouves à pas trop cher. roll


Mon pc : AMD R5-2400G sur Asus Prime B450M-A, 16 Go ram, Nvidia 1050Ti (4Go), SSD Samsung 850 EVO (250 Go) + black caviar de 1To.

Hors ligne

#11 20/11/2021 14:37:25

bruno09
Membre
Lieu : Ariège
Inscription : 21/10/2020
Messages : 42

Re : [Résolu] Carte graphique HS?

Rhodry a écrit :

Fedora 35 supporte les drivers propriétaires NVidia avec un wayland amélioré.
Avez vous essayé de vous logger sous wayland ?

oui, et aussi galère qu'avec X11.


Fedora 35 Workstation - AMD Ryzen 5600X - CM Gigabyte B550 AORUS Elite V2 - SSD Crucial P5 M.2 PCIe NVMe 1 To - 32Go Ram DDR4 2666Mhz Kingston HYPER X Fury - CG Nvidia GTX 970 4GB MSI - IIYAMA Curved 34" UWHD (3440x1440) (144 Hz) Display Port.

Hors ligne

#12 20/11/2021 14:38:43

bruno09
Membre
Lieu : Ariège
Inscription : 21/10/2020
Messages : 42

Re : [Résolu] Carte graphique HS?

winmandrake a écrit :
bruno09 a écrit :

Bon je viens de tenter une install avec une manjaro en bootant avec les drivers opensource,

j'ai eu une belle initialisation a la bonne résolution, de la couleur, puis une fois sur le bureau, je n'avais que la souris et plein d'arctefacts graphique impossible de cliquer nulle part.
Bilan je pense que la carte est HS, surtout que cela s'est passé fonctionnement.

Effectivement, ça sent la carte HS. Malheureusement pour toi vu les prix pratiqués sur les neuves... rabat toi sur une d'occasion si tu trouves à pas trop cher. roll

oui je scan le boncoin depuis hier, et c'est pas simple ce moment oui...


Fedora 35 Workstation - AMD Ryzen 5600X - CM Gigabyte B550 AORUS Elite V2 - SSD Crucial P5 M.2 PCIe NVMe 1 To - 32Go Ram DDR4 2666Mhz Kingston HYPER X Fury - CG Nvidia GTX 970 4GB MSI - IIYAMA Curved 34" UWHD (3440x1440) (144 Hz) Display Port.

Hors ligne

#13 24/11/2021 19:19:01

bruno09
Membre
Lieu : Ariège
Inscription : 21/10/2020
Messages : 42

Re : [Résolu] Carte graphique HS?

je confirme bien que la CG est HS, je l'ai remplacé par un GTX 1050 2GB, installé les akmod Nvidia, tout roule

nvidia-smi
Wed Nov 24 18:12:36 2021       
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 495.44       Driver Version: 495.44       CUDA Version: 11.5     |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|                               |                      |               MIG M. |
|===============================+======================+======================|
|   0  NVIDIA GeForce ...  Off  | 00000000:01:00.0  On |                  N/A |
|  0%   43C    P8    N/A /  70W |     96MiB /  1999MiB |      1%      Default |
|                               |                      |                  N/A |
+-------------------------------+----------------------+----------------------+
                                                                               
+-----------------------------------------------------------------------------+
| Processes:                                                                  |
|  GPU   GI   CI        PID   Type   Process name                  GPU Memory |
|        ID   ID                                                   Usage      |
|=============================================================================|
|    0   N/A  N/A      1113      G   /usr/libexec/Xorg                  42MiB |
|    0   N/A  N/A      1199      G   /usr/bin/gnome-shell               50MiB |
+-----------------------------------------------------------------------------+

Fedora 35 Workstation - AMD Ryzen 5600X - CM Gigabyte B550 AORUS Elite V2 - SSD Crucial P5 M.2 PCIe NVMe 1 To - 32Go Ram DDR4 2666Mhz Kingston HYPER X Fury - CG Nvidia GTX 970 4GB MSI - IIYAMA Curved 34" UWHD (3440x1440) (144 Hz) Display Port.

Hors ligne

Pied de page des forums