Fedora-Fr - Communauté francophone Fedora - Linux

Communauté francophone des utilisateurs de la distribution Linux Fedora.

  

Dernière news : Sortie de Fedora Linux 35 Beta

#26 08/01/2021 09:49:00

Vorahk
Membre
Lieu : Près de Chartres
Inscription : 16/01/2019
Messages : 166

Re : Triple-screen, Radeon RX580: config à moitié KO au réveil des écrans

Je ne sais plus si j'en avais parlé ou pas, mais assez rarement, je n'ai pas d'affichage au boot (ou je le perd pendant le boot ou peu après), c'est arrivé ce matin. J'ai récupéré le dmesg et /var/log/Xorg.0.log:

dmesg:

[    0.000000] Linux version 5.9.16-200.fc33.x86_64 (mockbuild@bkernel01.iad2.fedoraproject.org) (gcc (GCC) 10.2.1 20201125 (Red Hat 10.2.1-9), GNU ld version 2.35-15.fc33) #1 SMP Mon Dec 21 14:08:22 UTC 2020
[    0.000000] Command line: BOOT_IMAGE=(hd2,gpt2)/vmlinuz-5.9.16-200.fc33.x86_64 root=UUID=eb277b8e-ba9b-4866-a74a-48f15117bbbb ro resume=UUID=aeb38ad4-9309-4c96-bfbb-d1217c4526c5 rhgb quiet amdgpu.ppfeaturemask=0xffffffff
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009e01fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009e02000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a20b000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000eb8c0fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000eb8c1000-0x00000000eba01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000eba02000-0x00000000ebe83fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ebe84000-0x00000000ebf98fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ebf99000-0x00000000ecbbafff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ecbbb000-0x00000000eeffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ef000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000040f37ffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0xe7a33018-0xe7a41057] usable ==> usable
[    0.000000] e820: update [mem 0xe7a33018-0xe7a41057] usable ==> usable
[    0.000000] e820: update [mem 0xe7a16018-0xe7a32e57] usable ==> usable
[    0.000000] e820: update [mem 0xe7a16018-0xe7a32e57] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009e01fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000009e02000-0x0000000009ffffff] reserved
[    0.000000] reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] reserve setup_data: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000000a20b000-0x000000000affffff] usable
[    0.000000] reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] reserve setup_data: [mem 0x000000000b020000-0x00000000e7a16017] usable
[    0.000000] reserve setup_data: [mem 0x00000000e7a16018-0x00000000e7a32e57] usable
[    0.000000] reserve setup_data: [mem 0x00000000e7a32e58-0x00000000e7a33017] usable
[    0.000000] reserve setup_data: [mem 0x00000000e7a33018-0x00000000e7a41057] usable
[    0.000000] reserve setup_data: [mem 0x00000000e7a41058-0x00000000eb8c0fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000eb8c1000-0x00000000eba01fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000eba02000-0x00000000ebe83fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000ebe84000-0x00000000ebf98fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000ebf99000-0x00000000ecbbafff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ecbbb000-0x00000000eeffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000ef000000-0x00000000efffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000040f37ffff] usable
[    0.000000] efi: EFI v2.70 by American Megatrends
[    0.000000] efi: ACPI 2.0=0xebf15000 ACPI=0xebf15000 SMBIOS=0xeca13000 SMBIOS 3.0=0xeca12000 MEMATTR=0xea08e018 ESRT=0xea6eb498 RNG=0xeca1ce18 
[    0.000000] efi: seeding entropy pool
[    0.000000] secureboot: Secure boot disabled
[    0.000000] SMBIOS 3.2.0 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. AB350-Gaming 3/AB350-Gaming 3-CF, BIOS F51b 07/02/2020
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x40f380 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 base 0000E0000000 mask FFFFF0000000 write-back
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000410000000 aka 16640M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: update [mem 0xf0000000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xef000 max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x00000000ea6eb498 to 0x00000000ea6eb4d0.
[    0.000000] e820: update [mem 0xea6eb000-0xea6ebfff] usable ==> reserved
[    0.000000] Using GB pages for direct mapping
[    0.000000] secureboot: Secure boot disabled
[    0.000000] RAMDISK: [mem 0x5a38d000-0x5cd1bfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000EBF15000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000EBF150A8 0000D4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000EBF1BCC8 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000EBF15218 006AAE (v02 ALASKA A M I    01072009 INTL 20160930)
[    0.000000] ACPI: FACS 0x00000000EBF81E00 000040
[    0.000000] ACPI: APIC 0x00000000EBF1BDE0 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000EBF1BF40 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x00000000EBF1BF88 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000EBF1C028 000094 (v02 ALASKA A M I    01072009 AMI  01072009)
[    0.000000] ACPI: SSDT 0x00000000EBF1C0C0 008C98 (v02 ALASKA A M I    00000002 MSFT 04000000)
[    0.000000] ACPI: SSDT 0x00000000EBF24D58 00384D (v01 ALASKA A M I    00000001 INTL 20160930)
[    0.000000] ACPI: MCFG 0x00000000EBF285A8 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: SSDT 0x00000000EBF285E8 005EFB (v01 ALASKA A M I    00000001 INTL 20160930)
[    0.000000] ACPI: HPET 0x00000000EBF2E4E8 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.000000] ACPI: SSDT 0x00000000EBF2E520 000024 (v01 ALASKA A M I    00001000 INTL 20160930)
[    0.000000] ACPI: UEFI 0x00000000EBF2E548 000042 (v01 ALASKA A M I    00000002      01000013)
[    0.000000] ACPI: VFCT 0x00000000EBF2E590 00E884 (v01 ALASKA A M I    00000001 AMD  31504F47)
[    0.000000] ACPI: BGRT 0x00000000EBF3CE18 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: IVRS 0x00000000EBF3CE50 0000D0 (v02 ALASKA A M I    00000001 AMD  00000000)
[    0.000000] ACPI: SSDT 0x00000000EBF3CF20 00119C (v01 ALASKA A M I    00000001 AMD  00000001)
[    0.000000] ACPI: CRAT 0x00000000EBF3E0C0 000850 (v01 ALASKA A M I    00000001 AMD  00000001)
[    0.000000] ACPI: CDIT 0x00000000EBF3E910 000029 (v01 ALASKA A M I    00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000EBF3E940 001EC3 (v01 ALASKA A M I    00000001 INTL 20160930)
[    0.000000] ACPI: SSDT 0x00000000EBF40808 0000BF (v01 ALASKA A M I    00001000 INTL 20160930)
[    0.000000] ACPI: WSMT 0x00000000EBF408C8 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000EBF408F0 0013F0 (v01 ALASKA A M I    00000001 INTL 20160930)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] system APIC only can use physical flat
[    0.000000] Setting APIC routing to physical flat.
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000040f37ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x40f355000-0x40f37ffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000040f37ffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000009e01fff]
[    0.000000]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.000000]   node   0: [mem 0x000000000a20b000-0x000000000affffff]
[    0.000000]   node   0: [mem 0x000000000b020000-0x00000000eb8c0fff]
[    0.000000]   node   0: [mem 0x00000000eba02000-0x00000000ebe83fff]
[    0.000000]   node   0: [mem 0x00000000ecbbb000-0x00000000eeffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000040f37ffff]
[    0.000000] Zeroed struct page in unavailable ranges: 11650 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000040f37ffff]
[    0.000000] On node 0 totalpages: 4182654
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 26 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 15166 pages used for memmap
[    0.000000]   DMA32 zone: 970591 pages, LIFO batch:63
[    0.000000]   Normal zone: 50126 pages used for memmap
[    0.000000]   Normal zone: 3208064 pages, LIFO batch:63
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] system APIC only can use physical flat
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] e820: update [mem 0xe8712000-0xe8756fff] usable ==> reserved
[    0.000000] smpboot: Allowing 32 CPUs, 24 hotplug CPUs
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x09e02000-0x09ffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20afff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xe7a16000-0xe7a16fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xe7a32000-0xe7a32fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xe7a33000-0xe7a33fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xe7a41000-0xe7a41fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xe8712000-0xe8756fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xea6eb000-0xea6ebfff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xeb8c1000-0xeba01fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xebe84000-0xebf98fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xebf99000-0xecbbafff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xef000000-0xefffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd000000-0xffffffff]
[    0.000000] [mem 0xf0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
[    0.000000] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4117272
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=(hd2,gpt2)/vmlinuz-5.9.16-200.fc33.x86_64 root=UUID=eb277b8e-ba9b-4866-a74a-48f15117bbbb ro resume=UUID=aeb38ad4-9309-4c96-bfbb-d1217c4526c5 rhgb quiet amdgpu.ppfeaturemask=0xffffffff
[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 16185552K/16730616K available (14339K kernel code, 2518K rwdata, 9408K rodata, 2516K init, 4580K bss, 544804K reserved, 0K cma-reserved)
[    0.000000] random: get_random_u64 called from __kmem_cache_create+0x2e/0x550 with crng_init=0
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[    0.000000] ftrace: allocating 44240 entries in 173 pages
[    0.000000] ftrace: allocated 173 pages with 5 groups
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[    0.000000] NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
[    0.000000] random: crng done (trusting CPU's manufacturer)
[    0.000000] Console: colour dummy device 80x25
[    0.000000] printk: console [tty0] enabled
[    0.000000] ACPI: Core revision 20200717
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.012000] tsc: Unable to calibrate against PIT
[    0.012000] tsc: using HPET reference calibration
[    0.012000] tsc: Detected 3492.816 MHz processor
[    0.000003] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3258ce3ad16, max_idle_ns: 440795295018 ns
[    0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 6985.63 BogoMIPS (lpj=3492816)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.003034] LSM: Security Framework initializing
[    0.003044] Yama: becoming mindful.
[    0.003049] SELinux:  Initializing.
[    0.003098] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.003119] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.003367] LVT offset 1 assigned for vector 0xf9
[    0.003426] LVT offset 2 assigned for vector 0xf4
[    0.003441] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.003442] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[    0.003444] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.003445] Spectre V2 : Mitigation: Full AMD retpoline
[    0.003446] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.003447] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.003448] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.003657] Freeing SMP alternatives memory: 40K
[    0.107821] smpboot: CPU0: AMD Ryzen 5 1500X Quad-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
[    0.107924] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[    0.107928] ... version:                0
[    0.107928] ... bit width:              48
[    0.107928] ... generic registers:      6
[    0.107929] ... value mask:             0000ffffffffffff
[    0.107929] ... max period:             00007fffffffffff
[    0.107929] ... fixed-purpose events:   0
[    0.107930] ... event mask:             000000000000003f
[    0.107957] rcu: Hierarchical SRCU implementation.
[    0.108004] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.108004] smp: Bringing up secondary CPUs ...
[    0.108004] x86: Booting SMP configuration:
[    0.108004] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7
[    0.116043] smp: Brought up 1 node, 8 CPUs
[    0.116043] smpboot: Max logical packages: 4
[    0.116043] smpboot: Total of 8 processors activated (55885.05 BogoMIPS)
[    0.117440] devtmpfs: initialized
[    0.117440] x86/mm: Memory block size: 128MB
[    0.118248] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20afff] (45056 bytes)
[    0.118248] PM: Registering ACPI NVS region [mem 0xebe84000-0xebf98fff] (1134592 bytes)
[    0.118248] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.118248] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.118248] xor: automatically using best checksumming function   avx       
[    0.118248] pinctrl core: initialized pinctrl subsystem
[    0.118248] PM: RTC time: 07:04:35, date: 2021-01-08
[    0.118298] NET: Registered protocol family 16
[    0.118371] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.118375] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.118378] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.118383] audit: initializing netlink subsys (disabled)
[    0.119014] audit: type=2000 audit(1610089475.131:1): state=initialized audit_enabled=0 res=1
[    0.119076] thermal_sys: Registered thermal governor 'fair_share'
[    0.119077] thermal_sys: Registered thermal governor 'bang_bang'
[    0.119077] thermal_sys: Registered thermal governor 'step_wise'
[    0.119078] thermal_sys: Registered thermal governor 'user_space'
[    0.119086] cpuidle: using governor menu
[    0.119086] ACPI: bus type PCI registered
[    0.119086] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.119124] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.119125] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.119132] PCI: Using configuration type 1 for base access
[    0.121039] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.121039] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.214106] cryptd: max_cpu_qlen set to 1000
[    0.216315] alg: No test for 842 (842-generic)
[    0.216315] alg: No test for 842 (842-scomp)
[    0.218138] raid6: skip pq benchmark and using algorithm avx2x4
[    0.218138] raid6: using avx2x2 recovery algorithm
[    0.218138] ACPI: Added _OSI(Module Device)
[    0.218138] ACPI: Added _OSI(Processor Device)
[    0.218138] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.218138] ACPI: Added _OSI(Processor Aggregator Device)
[    0.218138] ACPI: Added _OSI(Linux-Dell-Video)
[    0.218138] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.218138] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.225823] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.226797] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.232233] ACPI: Interpreter enabled
[    0.232246] ACPI: (supports S0 S3 S4 S5)
[    0.232246] ACPI: Using IOAPIC for interrupt routing
[    0.232475] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.232738] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.238804] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.238807] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.238920] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC]
[    0.239027] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.239036] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.239240] PCI host bridge to bus 0000:00
[    0.239241] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.239242] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.239243] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.239244] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.239245] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.239245] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.239246] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfcffffff window]
[    0.239247] pci_bus 0000:00: root bus resource [mem 0x40f380000-0x7fffffffff window]
[    0.239248] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.239256] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
[    0.239331] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
[    0.239418] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[    0.239475] pci 0000:00:01.1: [1022:1453] type 01 class 0x060400
[    0.239591] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    0.239736] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
[    0.239768] pci 0000:00:01.3: enabling Extended Tags
[    0.239851] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[    0.239993] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
[    0.240065] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
[    0.240120] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
[    0.240226] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.240368] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
[    0.240442] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
[    0.240498] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
[    0.240525] pci 0000:00:07.1: enabling Extended Tags
[    0.240606] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.240745] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[    0.240801] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
[    0.240834] pci 0000:00:08.1: enabling Extended Tags
[    0.240916] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.241096] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.241308] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.241520] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
[    0.241566] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
[    0.241608] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
[    0.241650] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
[    0.241691] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
[    0.241733] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
[    0.241775] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
[    0.241817] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
[    0.241964] pci 0000:01:00.0: [1987:5012] type 00 class 0x010802
[    0.242008] pci 0000:01:00.0: reg 0x10: [mem 0xfcf00000-0xfcf03fff 64bit]
[    0.242458] pci 0000:00:01.1: PCI bridge to [bus 01]
[    0.242462] pci 0000:00:01.1:   bridge window [mem 0xfcf00000-0xfcffffff]
[    0.242533] pci 0000:02:00.0: [1022:43bb] type 00 class 0x0c0330
[    0.242548] pci 0000:02:00.0: reg 0x10: [mem 0xfcca0000-0xfcca7fff 64bit]
[    0.242581] pci 0000:02:00.0: enabling Extended Tags
[    0.242624] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.242710] pci 0000:02:00.1: [1022:43b7] type 00 class 0x010601
[    0.242751] pci 0000:02:00.1: reg 0x24: [mem 0xfcc80000-0xfcc9ffff]
[    0.242757] pci 0000:02:00.1: reg 0x30: [mem 0xfcc00000-0xfcc7ffff pref]
[    0.242762] pci 0000:02:00.1: enabling Extended Tags
[    0.242797] pci 0000:02:00.1: PME# supported from D3hot D3cold
[    0.242859] pci 0000:02:00.2: [1022:43b2] type 01 class 0x060400
[    0.242896] pci 0000:02:00.2: enabling Extended Tags
[    0.242935] pci 0000:02:00.2: PME# supported from D3hot D3cold
[    0.243025] pci 0000:00:01.3: PCI bridge to [bus 02-08]
[    0.243027] pci 0000:00:01.3:   bridge window [io  0xf000-0xffff]
[    0.243029] pci 0000:00:01.3:   bridge window [mem 0xfca00000-0xfccfffff]
[    0.243031] pci 0000:00:01.3:   bridge window [mem 0x7ff0300000-0x7ff03fffff 64bit pref]
[    0.243104] pci 0000:03:00.0: [1022:43b4] type 01 class 0x060400
[    0.243144] pci 0000:03:00.0: enabling Extended Tags
[    0.243193] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.243278] pci 0000:03:01.0: [1022:43b4] type 01 class 0x060400
[    0.243318] pci 0000:03:01.0: enabling Extended Tags
[    0.243366] pci 0000:03:01.0: PME# supported from D3hot D3cold
[    0.243451] pci 0000:03:04.0: [1022:43b4] type 01 class 0x060400
[    0.243491] pci 0000:03:04.0: enabling Extended Tags
[    0.243539] pci 0000:03:04.0: PME# supported from D3hot D3cold
[    0.243624] pci 0000:03:06.0: [1022:43b4] type 01 class 0x060400
[    0.243664] pci 0000:03:06.0: enabling Extended Tags
[    0.243713] pci 0000:03:06.0: PME# supported from D3hot D3cold
[    0.243800] pci 0000:03:07.0: [1022:43b4] type 01 class 0x060400
[    0.243840] pci 0000:03:07.0: enabling Extended Tags
[    0.243889] pci 0000:03:07.0: PME# supported from D3hot D3cold
[    0.243980] pci 0000:02:00.2: PCI bridge to [bus 03-08]
[    0.243984] pci 0000:02:00.2:   bridge window [io  0xf000-0xffff]
[    0.243986] pci 0000:02:00.2:   bridge window [mem 0xfca00000-0xfcbfffff]
[    0.243990] pci 0000:02:00.2:   bridge window [mem 0x7ff0300000-0x7ff03fffff 64bit pref]
[    0.244057] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    0.244082] pci 0000:04:00.0: reg 0x10: [io  0xf000-0xf0ff]
[    0.244117] pci 0000:04:00.0: reg 0x18: [mem 0xfcb00000-0xfcb00fff 64bit]
[    0.244138] pci 0000:04:00.0: reg 0x20: [mem 0x7ff0300000-0x7ff0303fff 64bit pref]
[    0.244273] pci 0000:04:00.0: supports D1 D2
[    0.244274] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.244448] pci 0000:03:00.0: PCI bridge to [bus 04]
[    0.244452] pci 0000:03:00.0:   bridge window [io  0xf000-0xffff]
[    0.244454] pci 0000:03:00.0:   bridge window [mem 0xfcb00000-0xfcbfffff]
[    0.244459] pci 0000:03:00.0:   bridge window [mem 0x7ff0300000-0x7ff03fffff 64bit pref]
[    0.244493] pci 0000:03:01.0: PCI bridge to [bus 05]
[    0.244534] pci 0000:03:04.0: PCI bridge to [bus 06]
[    0.244599] pci 0000:07:00.0: [8086:2526] type 00 class 0x028000
[    0.244627] pci 0000:07:00.0: reg 0x10: [mem 0xfca00000-0xfca03fff 64bit]
[    0.244772] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[    0.244915] pci 0000:03:06.0: PCI bridge to [bus 07]
[    0.244921] pci 0000:03:06.0:   bridge window [mem 0xfca00000-0xfcafffff]
[    0.244954] pci 0000:03:07.0: PCI bridge to [bus 08]
[    0.245052] pci 0000:09:00.0: [1002:67df] type 00 class 0x030000
[    0.245065] pci 0000:09:00.0: reg 0x10: [mem 0x7fe0000000-0x7fefffffff 64bit pref]
[    0.245073] pci 0000:09:00.0: reg 0x18: [mem 0x7ff0000000-0x7ff01fffff 64bit pref]
[    0.245078] pci 0000:09:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.245084] pci 0000:09:00.0: reg 0x24: [mem 0xfce00000-0xfce3ffff]
[    0.245089] pci 0000:09:00.0: reg 0x30: [mem 0xfce40000-0xfce5ffff pref]
[    0.245100] pci 0000:09:00.0: BAR 0: assigned to efifb
[    0.245147] pci 0000:09:00.0: supports D1 D2
[    0.245148] pci 0000:09:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.245247] pci 0000:09:00.1: [1002:aaf0] type 00 class 0x040300
[    0.245258] pci 0000:09:00.1: reg 0x10: [mem 0xfce60000-0xfce63fff 64bit]
[    0.245315] pci 0000:09:00.1: supports D1 D2
[    0.245392] pci 0000:00:03.1: PCI bridge to [bus 09]
[    0.245395] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.245396] pci 0000:00:03.1:   bridge window [mem 0xfce00000-0xfcefffff]
[    0.245398] pci 0000:00:03.1:   bridge window [mem 0x7fe0000000-0x7ff01fffff 64bit pref]
[    0.245457] pci 0000:0a:00.0: [1022:145a] type 00 class 0x130000
[    0.245477] pci 0000:0a:00.0: enabling Extended Tags
[    0.245533] pci 0000:0a:00.2: [1022:1456] type 00 class 0x108000
[    0.245543] pci 0000:0a:00.2: reg 0x18: [mem 0xfc800000-0xfc8fffff]
[    0.245550] pci 0000:0a:00.2: reg 0x24: [mem 0xfc900000-0xfc901fff]
[    0.245555] pci 0000:0a:00.2: enabling Extended Tags
[    0.245621] pci 0000:0a:00.3: [1022:145c] type 00 class 0x0c0330
[    0.245629] pci 0000:0a:00.3: reg 0x10: [mem 0xfc700000-0xfc7fffff 64bit]
[    0.245647] pci 0000:0a:00.3: enabling Extended Tags
[    0.245669] pci 0000:0a:00.3: PME# supported from D0 D3hot D3cold
[    0.245722] pci 0000:00:07.1: PCI bridge to [bus 0a]
[    0.245725] pci 0000:00:07.1:   bridge window [mem 0xfc700000-0xfc9fffff]
[    0.245796] pci 0000:0b:00.0: [1022:1455] type 00 class 0x130000
[    0.245818] pci 0000:0b:00.0: enabling Extended Tags
[    0.245879] pci 0000:0b:00.2: [1022:7901] type 00 class 0x010601
[    0.245902] pci 0000:0b:00.2: reg 0x24: [mem 0xfcd08000-0xfcd08fff]
[    0.245909] pci 0000:0b:00.2: enabling Extended Tags
[    0.245934] pci 0000:0b:00.2: PME# supported from D3hot D3cold
[    0.245980] pci 0000:0b:00.3: [1022:1457] type 00 class 0x040300
[    0.245986] pci 0000:0b:00.3: reg 0x10: [mem 0xfcd00000-0xfcd07fff]
[    0.246005] pci 0000:0b:00.3: enabling Extended Tags
[    0.246028] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold
[    0.246083] pci 0000:00:08.1: PCI bridge to [bus 0b]
[    0.246086] pci 0000:00:08.1:   bridge window [mem 0xfcd00000-0xfcdfffff]
[    0.246275] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.246318] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.246354] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.246399] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.246439] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.246472] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.246505] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.246537] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.247018] iommu: Default domain type: Translated 
[    0.247021] pci 0000:09:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.247021] pci 0000:09:00.0: vgaarb: bridge control possible
[    0.247021] pci 0000:09:00.0: vgaarb: setting as boot device
[    0.247021] vgaarb: loaded
[    0.247095] SCSI subsystem initialized
[    0.248014] libata version 3.00 loaded.
[    0.248029] ACPI: bus type USB registered
[    0.248041] usbcore: registered new interface driver usbfs
[    0.248046] usbcore: registered new interface driver hub
[    0.248072] usbcore: registered new device driver usb
[    0.248088] pps_core: LinuxPPS API ver. 1 registered
[    0.248088] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.248091] PTP clock support registered
[    0.248110] EDAC MC: Ver: 3.0.0
[    0.248120] Registered efivars operations
[    0.248120] NetLabel: Initializing
[    0.248120] NetLabel:  domain hash size = 128
[    0.248120] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.248120] NetLabel:  unlabeled traffic allowed by default
[    0.248120] PCI: Using ACPI for IRQ routing
[    0.251692] PCI: pci_cache_line_size set to 64 bytes
[    0.251756] e820: reserve RAM buffer [mem 0x09e02000-0x0bffffff]
[    0.251757] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.251758] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.251758] e820: reserve RAM buffer [mem 0xe7a16018-0xe7ffffff]
[    0.251759] e820: reserve RAM buffer [mem 0xe7a33018-0xe7ffffff]
[    0.251759] e820: reserve RAM buffer [mem 0xe8712000-0xebffffff]
[    0.251760] e820: reserve RAM buffer [mem 0xea6eb000-0xebffffff]
[    0.251761] e820: reserve RAM buffer [mem 0xeb8c1000-0xebffffff]
[    0.251761] e820: reserve RAM buffer [mem 0xebe84000-0xebffffff]
[    0.251762] e820: reserve RAM buffer [mem 0xef000000-0xefffffff]
[    0.251762] e820: reserve RAM buffer [mem 0x40f380000-0x40fffffff]
[    0.252054] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.252055] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.254034] clocksource: Switched to clocksource tsc-early
[    0.269754] VFS: Disk quotas dquot_6.6.0
[    0.269769] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.269829] pnp: PnP ACPI init
[    0.269939] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.269943] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.270004] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.270130] system 00:02: [io  0x0a00-0x0a2f] has been reserved
[    0.270131] system 00:02: [io  0x0a30-0x0a3f] has been reserved
[    0.270132] system 00:02: [io  0x0a40-0x0a4f] has been reserved
[    0.270134] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.270318] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.270319] system 00:03: [io  0x040b] has been reserved
[    0.270320] system 00:03: [io  0x04d6] has been reserved
[    0.270320] system 00:03: [io  0x0c00-0x0c01] has been reserved
[    0.270321] system 00:03: [io  0x0c14] has been reserved
[    0.270322] system 00:03: [io  0x0c50-0x0c51] has been reserved
[    0.270323] system 00:03: [io  0x0c52] has been reserved
[    0.270323] system 00:03: [io  0x0c6c] has been reserved
[    0.270324] system 00:03: [io  0x0c6f] has been reserved
[    0.270325] system 00:03: [io  0x0cd0-0x0cd1] has been reserved
[    0.270325] system 00:03: [io  0x0cd2-0x0cd3] has been reserved
[    0.270326] system 00:03: [io  0x0cd4-0x0cd5] has been reserved
[    0.270327] system 00:03: [io  0x0cd6-0x0cd7] has been reserved
[    0.270328] system 00:03: [io  0x0cd8-0x0cdf] has been reserved
[    0.270328] system 00:03: [io  0x0800-0x089f] has been reserved
[    0.270329] system 00:03: [io  0x0b00-0x0b0f] has been reserved
[    0.270330] system 00:03: [io  0x0b20-0x0b3f] has been reserved
[    0.270330] system 00:03: [io  0x0900-0x090f] has been reserved
[    0.270331] system 00:03: [io  0x0910-0x091f] has been reserved
[    0.270332] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.270333] system 00:03: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.270334] system 00:03: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.270335] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.270336] system 00:03: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.270337] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.270337] system 00:03: [mem 0xff000000-0xffffffff] has been reserved
[    0.270340] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.270667] pnp: PnP ACPI: found 4 devices
[    0.276158] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.276208] NET: Registered protocol family 2
[    0.276405] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.276419] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.276546] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.276665] TCP: Hash tables configured (established 131072 bind 65536)
[    0.276765] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.276790] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.276826] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.276903] NET: Registered protocol family 1
[    0.276907] NET: Registered protocol family 44
[    0.276918] pci 0000:00:01.1: PCI bridge to [bus 01]
[    0.276921] pci 0000:00:01.1:   bridge window [mem 0xfcf00000-0xfcffffff]
[    0.276925] pci 0000:03:00.0: PCI bridge to [bus 04]
[    0.276927] pci 0000:03:00.0:   bridge window [io  0xf000-0xffff]
[    0.276931] pci 0000:03:00.0:   bridge window [mem 0xfcb00000-0xfcbfffff]
[    0.276933] pci 0000:03:00.0:   bridge window [mem 0x7ff0300000-0x7ff03fffff 64bit pref]
[    0.276937] pci 0000:03:01.0: PCI bridge to [bus 05]
[    0.276946] pci 0000:03:04.0: PCI bridge to [bus 06]
[    0.276955] pci 0000:03:06.0: PCI bridge to [bus 07]
[    0.276958] pci 0000:03:06.0:   bridge window [mem 0xfca00000-0xfcafffff]
[    0.276964] pci 0000:03:07.0: PCI bridge to [bus 08]
[    0.276972] pci 0000:02:00.2: PCI bridge to [bus 03-08]
[    0.276974] pci 0000:02:00.2:   bridge window [io  0xf000-0xffff]
[    0.276977] pci 0000:02:00.2:   bridge window [mem 0xfca00000-0xfcbfffff]
[    0.276979] pci 0000:02:00.2:   bridge window [mem 0x7ff0300000-0x7ff03fffff 64bit pref]
[    0.276983] pci 0000:00:01.3: PCI bridge to [bus 02-08]
[    0.276984] pci 0000:00:01.3:   bridge window [io  0xf000-0xffff]
[    0.276986] pci 0000:00:01.3:   bridge window [mem 0xfca00000-0xfccfffff]
[    0.276987] pci 0000:00:01.3:   bridge window [mem 0x7ff0300000-0x7ff03fffff 64bit pref]
[    0.276990] pci 0000:00:03.1: PCI bridge to [bus 09]
[    0.276991] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.276993] pci 0000:00:03.1:   bridge window [mem 0xfce00000-0xfcefffff]
[    0.276994] pci 0000:00:03.1:   bridge window [mem 0x7fe0000000-0x7ff01fffff 64bit pref]
[    0.276997] pci 0000:00:07.1: PCI bridge to [bus 0a]
[    0.276998] pci 0000:00:07.1:   bridge window [mem 0xfc700000-0xfc9fffff]
[    0.277002] pci 0000:00:08.1: PCI bridge to [bus 0b]
[    0.277004] pci 0000:00:08.1:   bridge window [mem 0xfcd00000-0xfcdfffff]
[    0.277008] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.277009] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.277009] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.277010] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.277011] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.277011] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.277012] pci_bus 0000:00: resource 10 [mem 0xf0000000-0xfcffffff window]
[    0.277013] pci_bus 0000:00: resource 11 [mem 0x40f380000-0x7fffffffff window]
[    0.277014] pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff]
[    0.277014] pci_bus 0000:02: resource 0 [io  0xf000-0xffff]
[    0.277015] pci_bus 0000:02: resource 1 [mem 0xfca00000-0xfccfffff]
[    0.277015] pci_bus 0000:02: resource 2 [mem 0x7ff0300000-0x7ff03fffff 64bit pref]
[    0.277016] pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
[    0.277017] pci_bus 0000:03: resource 1 [mem 0xfca00000-0xfcbfffff]
[    0.277017] pci_bus 0000:03: resource 2 [mem 0x7ff0300000-0x7ff03fffff 64bit pref]
[    0.277018] pci_bus 0000:04: resource 0 [io  0xf000-0xffff]
[    0.277019] pci_bus 0000:04: resource 1 [mem 0xfcb00000-0xfcbfffff]
[    0.277019] pci_bus 0000:04: resource 2 [mem 0x7ff0300000-0x7ff03fffff 64bit pref]
[    0.277020] pci_bus 0000:07: resource 1 [mem 0xfca00000-0xfcafffff]
[    0.277021] pci_bus 0000:09: resource 0 [io  0xe000-0xefff]
[    0.277021] pci_bus 0000:09: resource 1 [mem 0xfce00000-0xfcefffff]
[    0.277022] pci_bus 0000:09: resource 2 [mem 0x7fe0000000-0x7ff01fffff 64bit pref]
[    0.277023] pci_bus 0000:0a: resource 1 [mem 0xfc700000-0xfc9fffff]
[    0.277023] pci_bus 0000:0b: resource 1 [mem 0xfcd00000-0xfcdfffff]
[    0.277207] pci 0000:09:00.1: D0 power state depends on 0000:09:00.0
[    0.277335] PCI: CLS 64 bytes, default 64
[    0.277358] Trying to unpack rootfs image as initramfs...
[    0.703904] Freeing initrd memory: 42556K
[    0.703945] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    0.704007] pci 0000:00:01.0: Adding to iommu group 0
[    0.704014] pci 0000:00:01.1: Adding to iommu group 0
[    0.704021] pci 0000:00:01.3: Adding to iommu group 0
[    0.704034] pci 0000:00:02.0: Adding to iommu group 1
[    0.704049] pci 0000:00:03.0: Adding to iommu group 2
[    0.704056] pci 0000:00:03.1: Adding to iommu group 2
[    0.704067] pci 0000:00:04.0: Adding to iommu group 3
[    0.704083] pci 0000:00:07.0: Adding to iommu group 4
[    0.704090] pci 0000:00:07.1: Adding to iommu group 4
[    0.704105] pci 0000:00:08.0: Adding to iommu group 5
[    0.704112] pci 0000:00:08.1: Adding to iommu group 5
[    0.704127] pci 0000:00:14.0: Adding to iommu group 6
[    0.704134] pci 0000:00:14.3: Adding to iommu group 6
[    0.704171] pci 0000:00:18.0: Adding to iommu group 7
[    0.704179] pci 0000:00:18.1: Adding to iommu group 7
[    0.704187] pci 0000:00:18.2: Adding to iommu group 7
[    0.704195] pci 0000:00:18.3: Adding to iommu group 7
[    0.704203] pci 0000:00:18.4: Adding to iommu group 7
[    0.704238] pci 0000:00:18.5: Adding to iommu group 7
[    0.704246] pci 0000:00:18.6: Adding to iommu group 7
[    0.704254] pci 0000:00:18.7: Adding to iommu group 7
[    0.704258] pci 0000:01:00.0: Adding to iommu group 0
[    0.704261] pci 0000:02:00.0: Adding to iommu group 0
[    0.704264] pci 0000:02:00.1: Adding to iommu group 0
[    0.704268] pci 0000:02:00.2: Adding to iommu group 0
[    0.704271] pci 0000:03:00.0: Adding to iommu group 0
[    0.704275] pci 0000:03:01.0: Adding to iommu group 0
[    0.704278] pci 0000:03:04.0: Adding to iommu group 0
[    0.704282] pci 0000:03:06.0: Adding to iommu group 0
[    0.704285] pci 0000:03:07.0: Adding to iommu group 0
[    0.704289] pci 0000:04:00.0: Adding to iommu group 0
[    0.704292] pci 0000:07:00.0: Adding to iommu group 0
[    0.704304] pci 0000:09:00.0: Adding to iommu group 2
[    0.704307] pci 0000:09:00.1: Adding to iommu group 2
[    0.704311] pci 0000:0a:00.0: Adding to iommu group 4
[    0.704314] pci 0000:0a:00.2: Adding to iommu group 4
[    0.704319] pci 0000:0a:00.3: Adding to iommu group 4
[    0.704322] pci 0000:0b:00.0: Adding to iommu group 5
[    0.704325] pci 0000:0b:00.2: Adding to iommu group 5
[    0.704328] pci 0000:0b:00.3: Adding to iommu group 5
[    0.705831] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[    0.705832] pci 0000:00:00.2: AMD-Vi: Extended features (0xf77ef22294ada):
[    0.705832]  PPR NX GT IA GA PC GA_vAPIC
[    0.705834] AMD-Vi: Interrupt remapping enabled
[    0.705834] AMD-Vi: Virtual APIC enabled
[    0.705936] AMD-Vi: Lazy IO/TLB flushing enabled
[    0.707107] amd_uncore: AMD NB counters detected
[    0.707111] amd_uncore: AMD LLC counters detected
[    0.707236] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.708107] Initialise system trusted keyrings
[    0.708116] Key type blacklist registered
[    0.708150] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    0.709008] zbud: loaded
[    0.709364] integrity: Platform Keyring initialized
[    0.717886] NET: Registered protocol family 38
[    0.717888] Key type asymmetric registered
[    0.717889] Asymmetric key parser 'x509' registered
[    0.717894] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.717942] io scheduler mq-deadline registered
[    0.717943] io scheduler kyber registered
[    0.717961] io scheduler bfq registered
[    0.718044] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.718211] pcieport 0000:00:01.1: PME: Signaling with IRQ 26
[    0.718372] pcieport 0000:00:01.3: PME: Signaling with IRQ 27
[    0.718524] pcieport 0000:00:03.1: PME: Signaling with IRQ 28
[    0.718684] pcieport 0000:00:07.1: PME: Signaling with IRQ 29
[    0.718923] pcieport 0000:00:08.1: PME: Signaling with IRQ 31
[    0.719661] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.719675] efifb: probing for efifb
[    0.719691] efifb: showing boot graphics
[    0.725880] efifb: framebuffer at 0x7fe0000000, using 3072k, total 3072k
[    0.725881] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.725881] efifb: scrolling: redraw
[    0.725882] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.725924] fbcon: Deferring console take-over
[    0.725925] fb0: EFI VGA frame buffer device
[    0.726026] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.726043] ACPI: Power Button [PWRB]
[    0.726067] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.726092] ACPI: Power Button [PWRF]
[    0.726123] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.726125] ACPI: \_PR_.C000: Found 2 idle states
[    0.726209] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.726217] ACPI: \_PR_.C002: Found 2 idle states
[    0.726284] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.726290] ACPI: \_PR_.C004: Found 2 idle states
[    0.726347] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.726353] ACPI: \_PR_.C006: Found 2 idle states
[    0.726405] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.726408] ACPI: \_PR_.C001: Found 2 idle states
[    0.726461] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.726465] ACPI: \_PR_.C003: Found 2 idle states
[    0.726541] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.726547] ACPI: \_PR_.C005: Found 2 idle states
[    0.726603] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.726608] ACPI: \_PR_.C007: Found 2 idle states
[    0.726812] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.727832] Non-volatile memory driver v1.3
[    0.727853] Linux agpgart interface v0.103
[    0.728502] ahci 0000:02:00.1: version 3.0
[    0.728584] ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled
[    0.728617] ahci 0000:02:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
[    0.728618] ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
[    0.728994] scsi host0: ahci
[    0.729097] scsi host1: ahci
[    0.729174] scsi host2: ahci
[    0.729253] scsi host3: ahci
[    0.729326] scsi host4: ahci
[    0.729397] scsi host5: ahci
[    0.729470] scsi host6: ahci
[    0.729540] scsi host7: ahci
[    0.729567] ata1: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80100 irq 41
[    0.729569] ata2: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80180 irq 41
[    0.729569] ata3: DUMMY
[    0.729569] ata4: DUMMY
[    0.729571] ata5: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80300 irq 41
[    0.729572] ata6: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80380 irq 41
[    0.729572] ata7: DUMMY
[    0.729572] ata8: DUMMY
[    0.729784] ahci 0000:0b:00.2: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    0.729785] ahci 0000:0b:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part sxs 
[    0.730074] scsi host8: ahci
[    0.730162] scsi host9: ahci
[    0.730237] scsi host10: ahci
[    0.730307] scsi host11: ahci
[    0.730330] ata9: SATA max UDMA/133 abar m4096@0xfcd08000 port 0xfcd08100 irq 43
[    0.730331] ata10: SATA max UDMA/133 abar m4096@0xfcd08000 port 0xfcd08180 irq 44
[    0.730332] ata11: SATA max UDMA/133 abar m4096@0xfcd08000 port 0xfcd08200 irq 45
[    0.730334] ata12: SATA max UDMA/133 abar m4096@0xfcd08000 port 0xfcd08280 irq 46
[    0.730437] libphy: Fixed MDIO Bus: probed
[    0.730493] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.730494] ehci-pci: EHCI PCI platform driver
[    0.730502] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.730503] ohci-pci: OHCI PCI platform driver
[    0.730510] uhci_hcd: USB Universal Host Controller Interface driver
[    0.730562] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.730583] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[    0.785990] xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000048000410
[    0.786132] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
[    0.786132] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.786133] usb usb1: Product: xHCI Host Controller
[    0.786134] usb usb1: Manufacturer: Linux 5.9.16-200.fc33.x86_64 xhci-hcd
[    0.786135] usb usb1: SerialNumber: 0000:02:00.0
[    0.786203] hub 1-0:1.0: USB hub found
[    0.786219] hub 1-0:1.0: 10 ports detected
[    0.786429] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.786449] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    0.786451] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.786480] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.786492] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.09
[    0.786493] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.786494] usb usb2: Product: xHCI Host Controller
[    0.786494] usb usb2: Manufacturer: Linux 5.9.16-200.fc33.x86_64 xhci-hcd
[    0.786495] usb usb2: SerialNumber: 0000:02:00.0
[    0.786545] hub 2-0:1.0: USB hub found
[    0.786551] hub 2-0:1.0: 4 ports detected
[    0.786607] usb: port power management may be unreliable
[    0.786690] xhci_hcd 0000:0a:00.3: xHCI Host Controller
[    0.786713] xhci_hcd 0000:0a:00.3: new USB bus registered, assigned bus number 3
[    0.786804] xhci_hcd 0000:0a:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000040000410
[    0.786901] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
[    0.786902] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.786903] usb usb3: Product: xHCI Host Controller
[    0.786904] usb usb3: Manufacturer: Linux 5.9.16-200.fc33.x86_64 xhci-hcd
[    0.786904] usb usb3: SerialNumber: 0000:0a:00.3
[    0.786956] hub 3-0:1.0: USB hub found
[    0.786961] hub 3-0:1.0: 4 ports detected
[    0.787085] xhci_hcd 0000:0a:00.3: xHCI Host Controller
[    0.787104] xhci_hcd 0000:0a:00.3: new USB bus registered, assigned bus number 4
[    0.787106] xhci_hcd 0000:0a:00.3: Host supports USB 3.0 SuperSpeed
[    0.787115] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.787130] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.09
[    0.787131] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.787132] usb usb4: Product: xHCI Host Controller
[    0.787132] usb usb4: Manufacturer: Linux 5.9.16-200.fc33.x86_64 xhci-hcd
[    0.787133] usb usb4: SerialNumber: 0000:0a:00.3
[    0.787182] hub 4-0:1.0: USB hub found
[    0.787187] hub 4-0:1.0: 4 ports detected
[    0.787297] usbcore: registered new interface driver usbserial_generic
[    0.787300] usbserial: USB Serial support registered for generic
[    0.787311] i8042: PNP: No PS/2 controller found.
[    0.787329] mousedev: PS/2 mouse device common for all mice
[    0.787401] rtc_cmos 00:01: RTC can wake from S4
[    0.787681] rtc_cmos 00:01: registered as rtc0
[    0.787739] rtc_cmos 00:01: setting system clock to 2021-01-08T07:04:36 UTC (1610089476)
[    0.787740] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.787767] device-mapper: uevent: version 1.0.3
[    0.787800] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[    0.787973] hid: raw HID events driver (C) Jiri Kosina
[    0.787995] usbcore: registered new interface driver usbhid
[    0.787995] usbhid: USB HID core driver
[    0.788068] drop_monitor: Initializing network drop monitor service
[    0.788117] Initializing XFRM netlink socket
[    0.788187] NET: Registered protocol family 10
[    0.790344] Segment Routing with IPv6
[    0.790345] RPL Segment Routing with IPv6
[    0.790358] mip6: Mobile IPv6
[    0.790359] NET: Registered protocol family 17
[    0.790794] microcode: CPU0: patch_level=0x08001138
[    0.790800] microcode: CPU1: patch_level=0x08001138
[    0.790804] microcode: CPU2: patch_level=0x08001138
[    0.790810] microcode: CPU3: patch_level=0x08001138
[    0.790816] microcode: CPU4: patch_level=0x08001138
[    0.790821] microcode: CPU5: patch_level=0x08001138
[    0.790826] microcode: CPU6: patch_level=0x08001138
[    0.790830] microcode: CPU7: patch_level=0x08001138
[    0.790833] microcode: Microcode Update Driver: v2.2.
[    0.790836] IPI shorthand broadcast: enabled
[    0.790840] AVX2 version of gcm_enc/dec engaged.
[    0.790840] AES CTR mode by8 optimization enabled
[    0.801495] sched_clock: Marking stable (813485388, -11995782)->(810096901, -8607295)
[    0.801593] registered taskstats version 1
[    0.801602] Loading compiled-in X.509 certificates
[    0.802097] Loaded X.509 cert 'Fedora kernel signing key: 30c58b3b81b239f44f57cf0370781d8bc5973104'
[    0.802112] zswap: loaded using pool lzo/zbud
[    0.802251] Key type ._fscrypt registered
[    0.802252] Key type .fscrypt registered
[    0.802252] Key type fscrypt-provisioning registered
[    0.802375] Btrfs loaded, crc32c=crc32c-generic
[    0.804031] Key type encrypted registered
[    0.804141] ima: No TPM chip found, activating TPM-bypass!
[    0.804145] ima: Allocated hash algorithm: sha256
[    0.804152] ima: No architecture policies found
[    0.804528] PM:   Magic number: 5:821:65
[    0.804617] memory memory93: hash matches
[    0.804656] RAS: Correctable Errors collector initialized.
[    1.040652] ata10: SATA link down (SStatus 0 SControl 300)
[    1.040879] ata9: SATA link down (SStatus 0 SControl 300)
[    1.045020] ata12: SATA link down (SStatus 0 SControl 300)
[    1.045042] ata11: SATA link down (SStatus 0 SControl 300)
[    1.109338] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[    1.171354] usb 1-9: new full-speed USB device number 2 using xhci_hcd
[    1.195341] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.196368] ata1.00: ATA-8: Hitachi HTS727550A9E364, JF3OA0D0, max UDMA/133
[    1.196370] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.197461] ata1.00: configured for UDMA/133
[    1.197567] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS72755 A0D0 PQ: 0 ANSI: 5
[    1.197678] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[    1.197750] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.197751] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.197755] sd 0:0:0:0: [sda] Write Protect is off
[    1.197756] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.197763] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.239453] usb 3-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 3.64
[    1.239454] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.239455] usb 3-1: Product: USB2.0 Hub             
[    1.239456] usb 3-1: Manufacturer: VIA Labs, Inc.         
[    1.261258]  sda: sda1 sda2 sda3 sda4
[    1.261954] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.299508] hub 3-1:1.0: USB hub found
[    1.299964] hub 3-1:1.0: 4 ports detected
[    1.363564] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    1.542112] usb 1-9: New USB device found, idVendor=8087, idProduct=0025, bcdDevice= 0.02
[    1.542114] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.659337] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.661303] ata2.00: ATAPI: Optiarc DVD RW AD-7280S, 1.01, max UDMA/100
[    1.663517] ata2.00: configured for UDMA/100
[    1.664199] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7280S  1.01 PQ: 0 ANSI: 5
[    1.701825] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.701826] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.702376] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.702417] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.747347] tsc: Refined TSC clocksource calibration: 3493.437 MHz
[    1.747356] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x325b1901053, max_idle_ns: 440795306184 ns
[    1.747543] clocksource: Switched to clocksource tsc
[    1.802920] usb 4-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 3.64
[    1.802921] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.802922] usb 4-1: Product: USB3.0 Hub             
[    1.802923] usb 4-1: Manufacturer: VIA Labs, Inc.         
[    1.827840] hub 4-1:1.0: USB hub found
[    1.828170] hub 4-1:1.0: 4 ports detected
[    2.009259] ata5: SATA link down (SStatus 0 SControl 300)
[    2.075332] usb 3-1.1: new full-speed USB device number 3 using xhci_hcd
[    2.232633] usb 3-1.1: New USB device found, idVendor=0d8c, idProduct=013c, bcdDevice= 1.00
[    2.232635] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.232636] usb 3-1.1: Product: USB PnP Sound Device
[    2.232637] usb 3-1.1: Manufacturer: C-Media Electronics Inc.      
[    2.294880] input: C-Media Electronics Inc.       USB PnP Sound Device as /devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-1/3-1.1/3-1.1:1.3/0003:0D8C:013C.0001/input/input2
[    2.320887] ata6: SATA link down (SStatus 0 SControl 300)
[    2.322162] Freeing unused decrypted memory: 2040K
[    2.322463] Freeing unused kernel image (initmem) memory: 2516K
[    2.322466] Write protecting the kernel read-only data: 26624k
[    2.322829] Freeing unused kernel image (text/rodata gap) memory: 2044K
[    2.322971] Freeing unused kernel image (rodata/data gap) memory: 832K
[    2.346221] hid-generic 0003:0D8C:013C.0001: input,hidraw0: USB HID v1.00 Device [C-Media Electronics Inc.       USB PnP Sound Device] on usb-0000:0a:00.3-1.1/input3
[    2.353262] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.353266] rodata_test: all tests were successful
[    2.353271] Run /init as init process
[    2.353271]   with arguments:
[    2.353272]     /init
[    2.353272]     rhgb
[    2.353273]   with environment:
[    2.353273]     HOME=/
[    2.353273]     TERM=linux
[    2.353274]     BOOT_IMAGE=(hd2,gpt2)/vmlinuz-5.9.16-200.fc33.x86_64
[    2.357248] usb 4-1.4: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[    2.363469] systemd[1]: systemd v246.7-2.fc33 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[    2.372916] usb 4-1.4: New USB device found, idVendor=2109, idProduct=0817, bcdDevice=90.23
[    2.372918] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.372919] usb 4-1.4: Product: USB3.0 Hub             
[    2.372919] usb 4-1.4: Manufacturer: VIA Labs, Inc.         
[    2.375181] systemd[1]: Detected architecture x86-64.
[    2.375183] systemd[1]: Running in initial RAM disk.
[    2.375222] systemd[1]: Set hostname to <Vorahk-PC.local>.
[    2.403524] hub 4-1.4:1.0: USB hub found
[    2.403790] hub 4-1.4:1.0: 4 ports detected
[    2.416746] systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[    2.422796] systemd[1]: Queued start job for default target Initrd Default Target.
[    2.422874] systemd[1]: Reached target Local File Systems.
[    2.422908] systemd[1]: Reached target Slices.
[    2.422919] systemd[1]: Reached target Swap.
[    2.422928] systemd[1]: Reached target Timers.
[    2.423015] systemd[1]: Listening on Journal Audit Socket.
[    2.423069] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.423130] systemd[1]: Listening on Journal Socket.
[    2.423188] systemd[1]: Listening on udev Control Socket.
[    2.423232] systemd[1]: Listening on udev Kernel Socket.
[    2.423242] systemd[1]: Reached target Sockets.
[    2.424085] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    2.424551] systemd[1]: Started Memstrack Anylazing Service.
[    2.425059] systemd[1]: Started Hardware RNG Entropy Gatherer Daemon.
[    2.426188] systemd[1]: Starting Journal Service...
[    2.426772] systemd[1]: Starting Load Kernel Modules...
[    2.427404] systemd[1]: Starting Setup Virtual Console...
[    2.427841] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    2.428512] systemd[1]: Starting Create Static Device Nodes in /dev...
[    2.434634] systemd[1]: Finished Create Static Device Nodes in /dev.
[    2.437669] systemd[1]: memstrack.service: Succeeded.
[    2.469002] i2c /dev entries driver
[    2.478231] fuse: init (API version 7.31)
[    2.479183] systemd[1]: Finished Load Kernel Modules.
[    2.479215] audit: type=1130 audit(1610089478.190:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.479907] systemd[1]: Starting Apply Kernel Variables...
[    2.487016] usb 3-1.4: new high-speed USB device number 4 using xhci_hcd
[    2.487106] systemd[1]: Finished Apply Kernel Variables.
[    2.487139] audit: type=1130 audit(1610089478.198:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.497050] systemd[1]: Finished Setup Virtual Console.
[    2.497073] audit: type=1130 audit(1610089478.208:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.497171] systemd[1]: Condition check resulted in dracut ask for additional cmdline parameters being skipped.
[    2.497883] systemd[1]: Starting dracut cmdline hook...
[    2.512575] systemd[1]: Started Journal Service.
[    2.512635] audit: type=1130 audit(1610089478.223:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.522400] audit: type=1130 audit(1610089478.233:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.537305] audit: type=1130 audit(1610089478.248:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.557732] audit: type=1130 audit(1610089478.268:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.558471] audit: type=1334 audit(1610089478.269:9): prog-id=6 op=LOAD
[    2.558528] audit: type=1334 audit(1610089478.269:10): prog-id=7 op=LOAD
[    2.629670] usb 3-1.4: New USB device found, idVendor=2109, idProduct=2817, bcdDevice=90.23
[    2.629673] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.629674] usb 3-1.4: Product: USB2.0 Hub             
[    2.629675] usb 3-1.4: Manufacturer: VIA Labs, Inc.         
[    2.675585] hub 3-1.4:1.0: USB hub found
[    2.676236] hub 3-1.4:1.0: 4 ports detected
[    2.727648] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    2.754438] nvme nvme0: pci function 0000:01:00.0
[    2.756530] libphy: r8169: probed
[    2.756726] r8169 0000:04:00.0 eth0: RTL8168g/8111g, e0:d5:5e:28:72:0c, XID 4c0, IRQ 64
[    2.756727] r8169 0000:04:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    2.758205] nvme nvme0: missing or invalid SUBNQN field.
[    2.758224] nvme nvme0: Shutdown timeout set to 10 seconds
[    2.760029] nvme nvme0: 8/0/0 default/read/poll queues
[    2.762700]  nvme0n1: p1 p2 p3 p4
[    2.868485] r8169 0000:04:00.0 eno1: renamed from eth0
[    2.877777] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    2.880767] ccp 0000:0a:00.2: enabling device (0000 -> 0002)
[    2.881098] ccp 0000:0a:00.2: ccp enabled
[    3.272540] [drm] amdgpu kernel modesetting enabled.
[    3.272603] amdgpu: Ignoring ACPI CRAT on non-APU system
[    3.272605] Virtual CRAT table created for CPU
[    3.272619] amdgpu: Topology: Add CPU node
[    3.272709] checking generic (7fe0000000 300000) vs hw (7fe0000000 10000000)
[    3.272710] fb0: switching to amdgpudrmfb from EFI VGA
[    3.272756] amdgpu 0000:09:00.0: vgaarb: deactivate vga console
[    3.272788] amdgpu 0000:09:00.0: enabling device (0006 -> 0007)
[    3.272869] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1DA2:0xE366 0xE7).
[    3.272870] amdgpu 0000:09:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[    3.272878] [drm] register mmio base: 0xFCE00000
[    3.272878] [drm] register mmio size: 262144
[    3.272885] [drm] add ip block number 0 <vi_common>
[    3.272886] [drm] add ip block number 1 <gmc_v8_0>
[    3.272886] [drm] add ip block number 2 <tonga_ih>
[    3.272887] [drm] add ip block number 3 <gfx_v8_0>
[    3.272888] [drm] add ip block number 4 <sdma_v3_0>
[    3.272889] [drm] add ip block number 5 <powerplay>
[    3.272890] [drm] add ip block number 6 <dm>
[    3.272891] [drm] add ip block number 7 <uvd_v6_0>
[    3.272892] [drm] add ip block number 8 <vce_v3_0>
[    3.272907] amdgpu: ATOM BIOS: 113-1E366UU-O5X
[    3.272919] [drm] UVD is enabled in VM mode
[    3.272920] [drm] UVD ENC is enabled in VM mode
[    3.272921] [drm] VCE enabled in VM mode
[    3.272945] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[    3.272987] amdgpu 0000:09:00.0: BAR 2: releasing [mem 0x7ff0000000-0x7ff01fffff 64bit pref]
[    3.272988] amdgpu 0000:09:00.0: BAR 0: releasing [mem 0x7fe0000000-0x7fefffffff 64bit pref]
[    3.273004] pcieport 0000:00:03.1: BAR 15: releasing [mem 0x7fe0000000-0x7ff01fffff 64bit pref]
[    3.273020] pcieport 0000:00:03.1: BAR 15: assigned [mem 0x480000000-0x5ffffffff 64bit pref]
[    3.273022] amdgpu 0000:09:00.0: BAR 0: assigned [mem 0x500000000-0x5ffffffff 64bit pref]
[    3.273029] amdgpu 0000:09:00.0: BAR 2: assigned [mem 0x480000000-0x4801fffff 64bit pref]
[    3.273036] pcieport 0000:00:03.1: PCI bridge to [bus 09]
[    3.273038] pcieport 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    3.273041] pcieport 0000:00:03.1:   bridge window [mem 0xfce00000-0xfcefffff]
[    3.273043] pcieport 0000:00:03.1:   bridge window [mem 0x480000000-0x5ffffffff 64bit pref]
[    3.273053] amdgpu 0000:09:00.0: amdgpu: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
[    3.273054] amdgpu 0000:09:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
[    3.273059] [drm] Detected VRAM RAM=4096M, BAR=4096M
[    3.273060] [drm] RAM width 256bits GDDR5
[    3.273110] [TTM] Zone  kernel: Available graphics memory: 8201316 KiB
[    3.273111] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[    3.273112] [TTM] Initializing pool allocator
[    3.273116] [TTM] Initializing DMA pool allocator
[    3.273143] [drm] amdgpu: 4096M of VRAM memory ready
[    3.273146] [drm] amdgpu: 4096M of GTT memory ready.
[    3.273148] [drm] GART: num cpu pages 65536, num gpu pages 65536
[    3.274747] [drm] PCIE GART of 256M enabled (table at 0x000000F400300000).
[    3.274868] [drm] Chained IB support enabled!
[    3.276405] amdgpu: hwmgr_sw_init smu backed is polaris10_smu
[    3.276500] [drm] Found UVD firmware Version: 1.130 Family ID: 16
[    3.282386] [drm] Found VCE firmware Version: 53.26 Binary ID: 3
[    3.343147] [drm] DM_PPLIB: values for Engine clock
[    3.343148] [drm] DM_PPLIB:	 300000
[    3.343148] [drm] DM_PPLIB:	 600000
[    3.343149] [drm] DM_PPLIB:	 900000
[    3.343149] [drm] DM_PPLIB:	 1145000
[    3.343150] [drm] DM_PPLIB:	 1215000
[    3.343150] [drm] DM_PPLIB:	 1257000
[    3.343150] [drm] DM_PPLIB:	 1300000
[    3.343151] [drm] DM_PPLIB:	 1411000
[    3.343151] [drm] DM_PPLIB: Validation clocks:
[    3.343152] [drm] DM_PPLIB:    engine_max_clock: 141100
[    3.343152] [drm] DM_PPLIB:    memory_max_clock: 200000
[    3.343153] [drm] DM_PPLIB:    level           : 8
[    3.343154] [drm] DM_PPLIB: values for Memory clock
[    3.343154] [drm] DM_PPLIB:	 300000
[    3.343155] [drm] DM_PPLIB:	 1000000
[    3.343155] [drm] DM_PPLIB:	 2000000
[    3.343155] [drm] DM_PPLIB: Validation clocks:
[    3.343156] [drm] DM_PPLIB:    engine_max_clock: 141100
[    3.343156] [drm] DM_PPLIB:    memory_max_clock: 200000
[    3.343157] [drm] DM_PPLIB:    level           : 8
[    3.343287] [drm] Display Core initialized with v3.2.95!
[    3.450012] usb 3-1.4.1: new full-speed USB device number 5 using xhci_hcd
[    3.460672] [drm] UVD and UVD ENC initialized successfully.
[    3.561628] [drm] VCE initialized successfully.
[    3.562361] kfd kfd: Allocated 3969056 bytes on gart
[    3.562793] Virtual CRAT table created for GPU
[    3.562898] amdgpu: Topology: Add dGPU node [0x67df:0x1002]
[    3.562900] kfd kfd: added device 1002:67df
[    3.562902] amdgpu 0000:09:00.0: amdgpu: SE 4, SH per SE 1, CU per SH 9, active_cu_number 36
[    3.566562] [drm] fb mappable at 0x500830000
[    3.566564] [drm] vram apper at 0x500000000
[    3.566564] [drm] size 8294400
[    3.566565] [drm] fb depth is 24
[    3.566566] [drm]    pitch is 7680
[    3.566610] fbcon: amdgpudrmfb (fb0) is primary device
[    3.566611] fbcon: Deferring console take-over
[    3.566613] amdgpu 0000:09:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[    3.582561] [drm] Initialized amdgpu 3.39.0 20150101 for 0000:09:00.0 on minor 0
[    3.595796] usb 3-1.4.1: New USB device found, idVendor=2516, idProduct=0034, bcdDevice=36.03
[    3.595798] usb 3-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.595799] usb 3-1.4.1: Product: SENTINEL III
[    3.595801] usb 3-1.4.1: Manufacturer: CoolerMaster
[    3.669348] input: CoolerMaster SENTINEL III as /devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-1/3-1.4/3-1.4.1/3-1.4.1:1.0/0003:2516:0034.0002/input/input3
[    3.669417] hid-generic 0003:2516:0034.0002: input,hidraw1: USB HID v1.11 Mouse [CoolerMaster SENTINEL III] on usb-0000:0a:00.3-1.4.1/input0
[    3.671330] input: CoolerMaster SENTINEL III Keyboard as /devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-1/3-1.4/3-1.4.1/3-1.4.1:1.1/0003:2516:0034.0003/input/input4
[    3.724107] input: CoolerMaster SENTINEL III Consumer Control as /devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-1/3-1.4/3-1.4.1/3-1.4.1:1.1/0003:2516:0034.0003/input/input5
[    3.724161] hid-generic 0003:2516:0034.0003: input,hiddev96,hidraw2: USB HID v1.11 Keyboard [CoolerMaster SENTINEL III] on usb-0000:0a:00.3-1.4.1/input1
[    3.777532] EXT4-fs (nvme0n1p4): mounted filesystem with ordered data mode. Opts: (null)
[    3.852021] usb 3-1.4.3: new full-speed USB device number 6 using xhci_hcd
[    3.986179] usb 3-1.4.3: New USB device found, idVendor=0c76, idProduct=1468, bcdDevice= 1.00
[    3.986181] usb 3-1.4.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.986182] usb 3-1.4.3: Product: KLIM Talk
[    4.021106] input: KLIM Talk as /devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-1/3-1.4/3-1.4.3/3-1.4.3:1.2/0003:0C76:1468.0004/input/input7
[    4.073078] hid-generic 0003:0C76:1468.0004: input,hidraw3: USB HID v1.00 Device [KLIM Talk] on usb-0000:0a:00.3-1.4.3/input2
[    4.205623] usb 3-1.4.4: new full-speed USB device number 7 using xhci_hcd
[    4.355305] usb 3-1.4.4: New USB device found, idVendor=046d, idProduct=c318, bcdDevice=55.01
[    4.355307] usb 3-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.355308] usb 3-1.4.4: Product: Logitech Illuminated Keyboard
[    4.355309] usb 3-1.4.4: Manufacturer: Logitech
[    4.440629] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-1/3-1.4/3-1.4.4/3-1.4.4:1.0/0003:046D:C318.0005/input/input8
[    4.454635] SELinux:  Permission watch in class filesystem not defined in policy.
[    4.454638] SELinux:  Permission watch in class file not defined in policy.
[    4.454639] SELinux:  Permission watch_mount in class file not defined in policy.
[    4.454639] SELinux:  Permission watch_sb in class file not defined in policy.
[    4.454639] SELinux:  Permission watch_with_perm in class file not defined in policy.
[    4.454640] SELinux:  Permission watch_reads in class file not defined in policy.
[    4.454642] SELinux:  Permission watch in class dir not defined in policy.
[    4.454642] SELinux:  Permission watch_mount in class dir not defined in policy.
[    4.454642] SELinux:  Permission watch_sb in class dir not defined in policy.
[    4.454643] SELinux:  Permission watch_with_perm in class dir not defined in policy.
[    4.454643] SELinux:  Permission watch_reads in class dir not defined in policy.
[    4.454645] SELinux:  Permission watch in class lnk_file not defined in policy.
[    4.454646] SELinux:  Permission watch_mount in class lnk_file not defined in policy.
[    4.454646] SELinux:  Permission watch_sb in class lnk_file not defined in policy.
[    4.454646] SELinux:  Permission watch_with_perm in class lnk_file not defined in policy.
[    4.454647] SELinux:  Permission watch_reads in class lnk_file not defined in policy.
[    4.454648] SELinux:  Permission watch in class chr_file not defined in policy.
[    4.454648] SELinux:  Permission watch_mount in class chr_file not defined in policy.
[    4.454649] SELinux:  Permission watch_sb in class chr_file not defined in policy.
[    4.454649] SELinux:  Permission watch_with_perm in class chr_file not defined in policy.
[    4.454649] SELinux:  Permission watch_reads in class chr_file not defined in policy.
[    4.454650] SELinux:  Permission watch in class blk_file not defined in policy.
[    4.454651] SELinux:  Permission watch_mount in class blk_file not defined in policy.
[    4.454651] SELinux:  Permission watch_sb in class blk_file not defined in policy.
[    4.454651] SELinux:  Permission watch_with_perm in class blk_file not defined in policy.
[    4.454651] SELinux:  Permission watch_reads in class blk_file not defined in policy.
[    4.454652] SELinux:  Permission watch in class sock_file not defined in policy.
[    4.454653] SELinux:  Permission watch_mount in class sock_file not defined in policy.
[    4.454653] SELinux:  Permission watch_sb in class sock_file not defined in policy.
[    4.454653] SELinux:  Permission watch_with_perm in class sock_file not defined in policy.
[    4.454654] SELinux:  Permission watch_reads in class sock_file not defined in policy.
[    4.454655] SELinux:  Permission watch in class fifo_file not defined in policy.
[    4.454655] SELinux:  Permission watch_mount in class fifo_file not defined in policy.
[    4.454655] SELinux:  Permission watch_sb in class fifo_file not defined in policy.
[    4.454656] SELinux:  Permission watch_with_perm in class fifo_file not defined in policy.
[    4.454656] SELinux:  Permission watch_reads in class fifo_file not defined in policy.
[    4.454686] SELinux:  Permission perfmon in class capability2 not defined in policy.
[    4.454686] SELinux:  Permission bpf in class capability2 not defined in policy.
[    4.454686] SELinux:  Permission checkpoint_restore in class capability2 not defined in policy.
[    4.454690] SELinux:  Permission perfmon in class cap2_userns not defined in policy.
[    4.454690] SELinux:  Permission bpf in class cap2_userns not defined in policy.
[    4.454691] SELinux:  Permission checkpoint_restore in class cap2_userns not defined in policy.
[    4.454711] SELinux:  Class perf_event not defined in policy.
[    4.454711] SELinux:  Class lockdown not defined in policy.
[    4.454712] SELinux: the above unknown classes and permissions will be allowed
[    4.454715] SELinux:  policy capability network_peer_controls=1
[    4.454715] SELinux:  policy capability open_perms=1
[    4.454715] SELinux:  policy capability extended_socket_class=1
[    4.454716] SELinux:  policy capability always_check_network=0
[    4.454716] SELinux:  policy capability cgroup_seclabel=1
[    4.454716] SELinux:  policy capability nnp_nosuid_transition=1
[    4.454716] SELinux:  policy capability genfs_seclabel_symlinks=0
[    4.472680] systemd[1]: Successfully loaded SELinux policy in 89.413ms.
[    4.492220] hid-generic 0003:046D:C318.0005: input,hidraw4: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:0a:00.3-1.4.4/input0
[    4.495422] input: Logitech Logitech Illuminated Keyboard Consumer Control as /devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-1/3-1.4/3-1.4.4/3-1.4.4:1.1/0003:046D:C318.0006/input/input9
[    4.512631] systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 23.357ms.
[    4.515217] systemd[1]: systemd v246.7-2.fc33 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[    4.527508] systemd[1]: Detected architecture x86-64.
[    4.527756] systemd[1]: Set hostname to <Vorahk-PC.local>.
[    4.547146] hid-generic 0003:046D:C318.0006: input,hiddev97,hidraw5: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:0a:00.3-1.4.4/input1
[    4.552583] systemd-sysv-generator[542]: SysV service '/etc/rc.d/init.d/jexec' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    4.553334] systemd-sysv-generator[542]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    4.553732] systemd-sysv-generator[542]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    4.557797] zram_generator::generator[544]: Creating dev-zram0.swap for /dev/zram0 (4096MB)
[    4.565276] zram: Added device: zram0
[    4.585929] systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[    4.631291] systemd[1]: /usr/lib/systemd/system/smartd.service:10: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[    4.631958] systemd[1]: /usr/lib/systemd/system/mcelog.service:8: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[    4.700538] systemd[1]: initrd-switch-root.service: Succeeded.
[    4.700658] systemd[1]: Stopped Switch Root.
[    4.700996] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[    4.701175] systemd[1]: Created slice system-getty.slice.
[    4.701341] systemd[1]: Created slice system-modprobe.slice.
[    4.701508] systemd[1]: Created slice system-sshd\x2dkeygen.slice.
[    4.701675] systemd[1]: Created slice system-swap\x2dcreate.slice.
[    4.701842] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    4.702047] systemd[1]: Created slice User and Session Slice.
[    4.702077] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[    4.702154] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.702462] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.702498] systemd[1]: Reached target Local Encrypted Volumes.
[    4.702521] systemd[1]: Reached target Login Prompts.
[    4.702546] systemd[1]: Stopped target Switch Root.
[    4.702566] systemd[1]: Stopped target Initrd File Systems.
[    4.702583] systemd[1]: Stopped target Initrd Root File System.
[    4.702632] systemd[1]: Reached target Slices.
[    4.702975] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.703597] systemd[1]: Listening on LVM2 poll daemon socket.
[    4.703683] systemd[1]: Listening on multipathd control socket.
[    4.704768] systemd[1]: Listening on Process Core Dump Socket.
[    4.704876] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    4.705278] systemd[1]: Listening on udev Control Socket.
[    4.705491] systemd[1]: Listening on udev Kernel Socket.
[    4.706022] systemd[1]: Activating swap /dev/disk/by-uuid/aeb38ad4-9309-4c96-bfbb-d1217c4526c5...
[    4.706742] systemd[1]: Mounting Huge Pages File System...
[    4.707637] systemd[1]: Mounting POSIX Message Queue File System...
[    4.708339] systemd[1]: Mounting Kernel Debug File System...
[    4.708518] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[    4.709224] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    4.709895] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    4.710576] systemd[1]: Starting Load Kernel Module configfs...
[    4.711334] systemd[1]: Starting Load Kernel Module drm...
[    4.711924] systemd[1]: Starting Load Kernel Module fuse...
[    4.712686] systemd[1]: Starting Preprocess NFS configuration convertion...
[    4.712948] systemd[1]: plymouth-switch-root.service: Succeeded.
[    4.713141] systemd[1]: Stopped Plymouth switch root service.
[    4.714364] systemd[1]: Starting Set Up Additional Binary Formats...
[    4.714447] systemd[1]: Stopped Journal Service.
[    4.715675] systemd[1]: Starting Journal Service...
[    4.716836] systemd[1]: Starting Load Kernel Modules...
[    4.717662] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.717751] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[    4.718046] Adding 8265724k swap on /dev/nvme0n1p3.  Priority:-2 extents:1 across:8265724k SSFS
[    4.718734] systemd[1]: Starting Coldplug All udev Devices...
[    4.719861] systemd[1]: sysroot.mount: Succeeded.
[    4.722516] systemd[1]: Mounted Huge Pages File System.
[    4.722684] systemd[1]: Mounted POSIX Message Queue File System.
[    4.722845] systemd[1]: Mounted Kernel Debug File System.
[    4.723475] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    4.723827] systemd[1]: modprobe@configfs.service: Succeeded.
[    4.724026] systemd[1]: Finished Load Kernel Module configfs.
[    4.724320] systemd[1]: modprobe@drm.service: Succeeded.
[    4.724526] systemd[1]: Finished Load Kernel Module drm.
[    4.724843] systemd[1]: modprobe@fuse.service: Succeeded.
[    4.725054] systemd[1]: Finished Load Kernel Module fuse.
[    4.725786] systemd[1]: Activated swap /dev/disk/by-uuid/aeb38ad4-9309-4c96-bfbb-d1217c4526c5.
[    4.726430] systemd[1]: nfs-convert.service: Succeeded.
[    4.726660] systemd[1]: Finished Preprocess NFS configuration convertion.
[    4.727199] systemd[1]: Finished Load Kernel Modules.
[    4.727484] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 561 (systemd-binfmt)
[    4.727897] EXT4-fs (nvme0n1p4): re-mounted. Opts: (null)
[    4.729377] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[    4.730819] systemd[1]: Mounting FUSE Control File System...
[    4.732291] systemd[1]: Mounting Kernel Configuration File System...
[    4.733570] systemd[1]: Starting Apply Kernel Variables...
[    4.735286] systemd[1]: Finished Remount Root and Kernel File Systems.
[    4.735555] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[    4.735756] systemd[1]: Mounted FUSE Control File System.
[    4.738078] systemd[1]: Finished Set Up Additional Binary Formats.
[    4.738340] systemd[1]: Mounted Kernel Configuration File System.
[    4.738721] systemd[1]: Condition check resulted in OSTree Remount OS/ Bind Mounts being skipped.
[    4.738772] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[    4.739169] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    4.739855] systemd[1]: Starting Load/Save Random Seed...
[    4.739933] systemd[1]: Condition check resulted in Create System Users being skipped.
[    4.740563] systemd[1]: Starting Create Static Device Nodes in /dev...
[    4.742301] systemd[1]: Finished Apply Kernel Variables.
[    4.752971] systemd[1]: Started Journal Service.
[    4.920758] acpi_cpufreq: overriding BIOS provided _PSD data
[    5.020535] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20200717/utaddress-204)
[    5.020542] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.021696] input: PC Speaker as /devices/platform/pcspkr/input/input11
[    5.036274] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    5.036371] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[    5.036550] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[    5.047889] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[    5.047890] RAPL PMU: hw unit of domain package 2^-16 Joules
[    5.122928] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.123516] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.157823] Bluetooth: Core ver 2.22
[    5.157838] NET: Registered protocol family 31
[    5.157838] Bluetooth: HCI device and connection manager initialized
[    5.157841] Bluetooth: HCI socket layer initialized
[    5.157842] Bluetooth: L2CAP socket layer initialized
[    5.157854] Bluetooth: SCO socket layer initialized
[    5.170882] kvm: Nested Virtualization enabled
[    5.170893] SVM: kvm: Nested Paging enabled
[    5.170894] SVM: Virtual VMLOAD VMSAVE supported
[    5.170894] SVM: Virtual GIF supported
[    5.175637] mc: Linux media interface: v0.10
[    5.178410] MCE: In-kernel MCE decoding enabled.
[    5.190880] EDAC amd64: F17h detected (node 0).
[    5.190887] Intel(R) Wireless WiFi driver for Linux
[    5.190918] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.202219] iwlwifi 0000:07:00.0: enabling device (0000 -> 0002)
[    5.204805] iwlwifi 0000:07:00.0: WRT: Overriding region id 0
[    5.204806] iwlwifi 0000:07:00.0: WRT: Overriding region id 1
[    5.204807] iwlwifi 0000:07:00.0: WRT: Overriding region id 2
[    5.204808] iwlwifi 0000:07:00.0: WRT: Overriding region id 3
[    5.204809] iwlwifi 0000:07:00.0: WRT: Overriding region id 4
[    5.204809] iwlwifi 0000:07:00.0: WRT: Overriding region id 6
[    5.204810] iwlwifi 0000:07:00.0: WRT: Overriding region id 8
[    5.204811] iwlwifi 0000:07:00.0: WRT: Overriding region id 9
[    5.204811] iwlwifi 0000:07:00.0: WRT: Overriding region id 10
[    5.204812] iwlwifi 0000:07:00.0: WRT: Overriding region id 11
[    5.204812] iwlwifi 0000:07:00.0: WRT: Overriding region id 15
[    5.204813] iwlwifi 0000:07:00.0: WRT: Overriding region id 16
[    5.204814] iwlwifi 0000:07:00.0: WRT: Overriding region id 18
[    5.204814] iwlwifi 0000:07:00.0: WRT: Overriding region id 19
[    5.204815] iwlwifi 0000:07:00.0: WRT: Overriding region id 20
[    5.204815] iwlwifi 0000:07:00.0: WRT: Overriding region id 21
[    5.204816] iwlwifi 0000:07:00.0: WRT: Overriding region id 28
[    5.205062] iwlwifi 0000:07:00.0: loaded firmware version 46.4d093a30.0 9260-th-b0-jf-b0-46.ucode op_mode iwlmvm
[    5.216746] EDAC amd64: F17h detected (node 0).
[    5.216786] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.239597] EDAC amd64: F17h detected (node 0).
[    5.239636] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.241422] pktcdvd: pktcdvd0: writer mapped to sr0
[    5.278786] usbcore: registered new interface driver btusb
[    5.283644] Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
[    5.283987] EDAC amd64: F17h detected (node 0).
[    5.284033] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.288361] zram0: detected capacity change from 0 to 4294967296
[    5.288646] Bluetooth: hci0: Device revision is 2
[    5.288647] Bluetooth: hci0: Secure boot is enabled
[    5.288648] Bluetooth: hci0: OTP lock is enabled
[    5.288648] Bluetooth: hci0: API lock is enabled
[    5.288649] Bluetooth: hci0: Debug lock is disabled
[    5.288650] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    5.289530] Bluetooth: hci0: Found device firmware: intel/ibt-18-16-1.sfi
[    5.295874] snd_hda_intel 0000:09:00.1: enabling device (0000 -> 0002)
[    5.295982] snd_hda_intel 0000:09:00.1: Force to non-snoop mode
[    5.296838] snd_hda_intel 0000:0b:00.3: enabling device (0000 -> 0002)
[    5.304544] EDAC amd64: F17h detected (node 0).
[    5.304582] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.304824] kauditd_printk_skb: 92 callbacks suppressed
[    5.304830] audit: type=1130 audit(1610089481.015:103): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=swap-create@zram0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.319257] snd_hda_intel 0000:09:00.1: bound 0000:09:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[    5.324030] Adding 4194300k swap on /dev/zram0.  Priority:100 extents:1 across:4194300k SSFS
[    5.328839] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card1/input12
[    5.328904] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card1/input13
[    5.328955] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card1/input14
[    5.329011] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card1/input15
[    5.329050] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card1/input16
[    5.329091] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card1/input17
[    5.329459] EDAC amd64: F17h detected (node 0).
[    5.329498] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.353130] audit: type=1130 audit(1610089481.064:104): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.356219] EDAC amd64: F17h detected (node 0).
[    5.356258] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.377632] iwlwifi 0000:07:00.0: Detected Intel(R) Wireless-AC 9260 160MHz, REV=0x324
[    5.381682] EDAC amd64: F17h detected (node 0).
[    5.381811] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[    5.381812] snd_hda_codec_realtek hdaudioC2D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.381813] snd_hda_codec_realtek hdaudioC2D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    5.381814] snd_hda_codec_realtek hdaudioC2D0:    mono: mono_out=0x0
[    5.381815] snd_hda_codec_realtek hdaudioC2D0:    dig-out=0x1e/0x0
[    5.381815] snd_hda_codec_realtek hdaudioC2D0:    inputs:
[    5.381816] snd_hda_codec_realtek hdaudioC2D0:      Front Mic=0x19
[    5.381817] snd_hda_codec_realtek hdaudioC2D0:      Rear Mic=0x18
[    5.381818] snd_hda_codec_realtek hdaudioC2D0:      Line=0x1a
[    5.381872] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.410433] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/sound/card2/input18
[    5.410496] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/sound/card2/input19
[    5.410547] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/sound/card2/input20
[    5.410602] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/sound/card2/input21
[    5.410656] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/sound/card2/input22
[    5.410708] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/sound/card2/input23
[    5.410753] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/sound/card2/input24
[    5.436025] iwlwifi 0000:07:00.0: base HW address: d4:3b:04:22:23:10
[    5.470611] usb 3-1.4.3: Warning! Unlikely big volume range (=496), cval->res is probably wrong.
[    5.470613] usb 3-1.4.3: [50] FU [Mic Capture Volume] ch = 1, val = 0/7936/16
[    5.470724] usbcore: registered new interface driver snd-usb-audio
[    5.504229] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    5.504603] thermal thermal_zone0: failed to read out thermal zone (-61)
[    5.513118] iwlwifi 0000:07:00.0 wlp7s0: renamed from wlan0
[    5.597436] audit: type=1130 audit(1610089481.308:105): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.653508] audit: type=1130 audit(1610089481.364:106): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.679501] audit: type=1130 audit(1610089481.390:107): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-ee4ad614\x2de8cc\x2d403b\x2dab27\x2d05e5812aca14 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.679844] audit: type=1130 audit(1610089481.390:108): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-80A6\x2d4F34 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.684867] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
[    5.706327] audit: type=1130 audit(1610089481.417:109): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.717863] audit: type=1130 audit(1610089481.428:110): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.721195] audit: type=1130 audit(1610089481.432:111): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.775662] audit: type=1130 audit(1610089481.486:112): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.814689] RPC: Registered named UNIX socket transport module.
[    5.814690] RPC: Registered udp transport module.
[    5.814691] RPC: Registered tcp transport module.
[    5.814692] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    5.852200] it87: Found IT8733E chip at 0xa60, revision 3
[    6.292140] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.292141] Bluetooth: BNEP filters: protocol multicast
[    6.292144] Bluetooth: BNEP socket layer initialized
[    6.420723] vboxdrv: loading out-of-tree module taints kernel.
[    6.420937] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    6.427411] vboxdrv: Found 8 processor cores
[    6.443487] vboxdrv: TSC mode is Invariant, tentative frequency 3493340593 Hz
[    6.443488] vboxdrv: Successfully loaded version 6.1.16_RPMFusion (interface 0x00300000)
[    6.449950] VBoxNetFlt: Successfully started.
[    6.455283] VBoxNetAdp: Successfully started.
[    6.925003] Generic FE-GE Realtek PHY r8169-400:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE)
[    7.091332] r8169 0000:04:00.0 eno1: Link is Down
[    7.285379] ACPI: \: failed to evaluate _DSM (0x1001)
[    7.490804] ACPI: \: failed to evaluate _DSM (0x1001)
[    8.027682] Bluetooth: hci0: Waiting for firmware download to complete
[    8.028690] Bluetooth: hci0: Firmware loaded in 2685325 usecs
[    8.028704] Bluetooth: hci0: Waiting for device to boot
[    8.045676] Bluetooth: hci0: Device booted in 16586 usecs
[    8.045905] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-18-16-1.ddc
[    8.054682] Bluetooth: hci0: Applying Intel DDC parameters completed
[    8.069683] Bluetooth: hci0: Firmware revision 0.1 build 168 week 48 2020
[    9.874510] r8169 0000:04:00.0 eno1: Link is Up - 1Gbps/Full - flow control rx/tx
[    9.874518] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[   12.389149] wlp7s0: authenticate with 68:ff:7b:0e:30:e8
[   12.390426] wlp7s0: send auth to 68:ff:7b:0e:30:e8 (try 1/3)
[   12.526933] wlp7s0: authenticated
[   12.527847] wlp7s0: associate with 68:ff:7b:0e:30:e8 (try 1/3)
[   12.529923] wlp7s0: RX AssocResp from 68:ff:7b:0e:30:e8 (capab=0x1411 status=0 aid=2)
[   12.532112] wlp7s0: associated
[   12.568985] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[   16.624418] Bluetooth: RFCOMM TTY layer initialized
[   16.624423] Bluetooth: RFCOMM socket layer initialized
[   16.624494] Bluetooth: RFCOMM ver 1.11
[   20.057101] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
[   25.350042] amdgpu: 
                last message was failed ret is 65535
[   25.350046] amdgpu: 
                failed to send message 282 ret is 65535 
[   25.350060] amdgpu: 
                last message was failed ret is 65535
[   25.350062] amdgpu: 
                failed to send message 201 ret is 65535 
[   25.350067] amdgpu: 
                last message was failed ret is 65535
[   25.350069] amdgpu: 
                failed to send message 200 ret is 65535 
[   25.363319] iommu ivhd0: AMD-Vi: Event logged [INVALID_DEVICE_REQUEST device=00:00.0 pasid=0x00000 address=0xfffffffdf8000000 flags=0x0a00]
[   25.363332] BUG: kernel NULL pointer dereference, address: 0000000000000038
[   25.363336] #PF: supervisor read access in kernel mode
[   25.363338] #PF: error_code(0x0000) - not-present page
[   25.363340] PGD 0 P4D 0 
[   25.363344] Oops: 0000 [#1] SMP NOPTI
[   25.363349] CPU: 2 PID: 138 Comm: irq/25-AMD-Vi Tainted: G           OE     5.9.16-200.fc33.x86_64 #1
[   25.363351] Hardware name: Gigabyte Technology Co., Ltd. AB350-Gaming 3/AB350-Gaming 3-CF, BIOS F51b 07/02/2020
[   25.363358] RIP: 0010:amd_iommu_int_thread+0x16c/0x410
[   25.363362] Code: d2 31 ff 66 44 89 54 24 14 0f b6 ec 45 0f b7 e4 89 ee e8 d7 89 ef ff 49 89 c7 48 85 c0 0f 84 2a 01 00 00 48 8b 80 90 03 00 00 <48> 8b 78 38 48 85 ff 74 18 48 83 c7 48 48 c7 c6 10 fc 0e b7 e8 5b
[   25.363364] RSP: 0018:ffffbb19403e7e38 EFLAGS: 00010286
[   25.363367] RAX: 0000000000000000 RBX: 0000000000000010 RCX: ffffffffb6671770
[   25.363369] RDX: ffff96db7c7b7038 RSI: ffff96db7c35d000 RDI: 0000000000000000
[   25.363371] RBP: 0000000000000000 R08: ffff96db7c14f8a0 R09: 0000000000000003
[   25.363372] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[   25.363374] R13: 00000003efb70000 R14: 0000000000000070 R15: ffff96db7c35d000
[   25.363377] FS:  0000000000000000(0000) GS:ffff96db7e880000(0000) knlGS:0000000000000000
[   25.363379] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   25.363380] CR2: 0000000000000038 CR3: 00000003a9d24000 CR4: 00000000003506e0
[   25.363382] Call Trace:
[   25.363392]  ? irq_thread_dtor+0xa0/0xa0
[   25.363394]  irq_thread_fn+0x20/0x60
[   25.363398]  irq_thread+0xd3/0x170
[   25.363401]  ? irq_finalize_oneshot.part.0+0xf0/0xf0
[   25.363404]  ? irq_thread_check_affinity+0xc0/0xc0
[   25.363408]  kthread+0x11b/0x140
[   25.363411]  ? __kthread_bind_mask+0x60/0x60
[   25.363415]  ret_from_fork+0x22/0x30
[   25.363419] Modules linked in: rfcomm ccm nft_objref nf_conntrack_netbios_ns nf_conntrack_broadcast cmac nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_raw iptable_security ip_set nf_tables nfnetlink ip6table_filter ip6_tables iptable_filter vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) bnep it87 hwmon_vid sunrpc vfat fat snd_hda_codec_realtek snd_hda_codec_generic iwlmvm ledtrig_audio snd_hda_codec_hdmi snd_hda_intel mac80211 snd_intel_dspcfg snd_usb_audio snd_hda_codec joydev libarc4 snd_usbmidi_lib pktcdvd snd_hda_core btusb snd_rawmidi iwlwifi edac_mce_amd snd_hwdep btrtl mc snd_seq btbcm kvm_amd btintel snd_seq_device snd_pcm bluetooth kvm snd_timer snd cfg80211 ecdh_generic ecc irqbypass rapl wmi_bmof sp5100_tco soundcore pcspkr i2c_piix4 k10temp rfkill gpio_amdpt
[   25.363468]  gpio_generic acpi_cpufreq binfmt_misc zram ip_tables amdgpu ccp iommu_v2 gpu_sched i2c_algo_bit ttm crct10dif_pclmul crc32_pclmul crc32c_intel drm_kms_helper ghash_clmulni_intel cec drm nvme nvme_core r8169 wmi pinctrl_amd fuse i2c_dev
[   25.363488] CR2: 0000000000000038
[   25.363491] ---[ end trace c902326bee6751f6 ]---
[   25.363494] RIP: 0010:amd_iommu_int_thread+0x16c/0x410
[   25.363497] Code: d2 31 ff 66 44 89 54 24 14 0f b6 ec 45 0f b7 e4 89 ee e8 d7 89 ef ff 49 89 c7 48 85 c0 0f 84 2a 01 00 00 48 8b 80 90 03 00 00 <48> 8b 78 38 48 85 ff 74 18 48 83 c7 48 48 c7 c6 10 fc 0e b7 e8 5b
[   25.363499] RSP: 0018:ffffbb19403e7e38 EFLAGS: 00010286
[   25.363501] RAX: 0000000000000000 RBX: 0000000000000010 RCX: ffffffffb6671770
[   25.363503] RDX: ffff96db7c7b7038 RSI: ffff96db7c35d000 RDI: 0000000000000000
[   25.363505] RBP: 0000000000000000 R08: ffff96db7c14f8a0 R09: 0000000000000003
[   25.363506] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[   25.363508] R13: 00000003efb70000 R14: 0000000000000070 R15: ffff96db7c35d000
[   25.363510] FS:  0000000000000000(0000) GS:ffff96db7e880000(0000) knlGS:0000000000000000
[   25.363512] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   25.363514] CR2: 0000000000000038 CR3: 00000003a9d24000 CR4: 00000000003506e0
[   25.363526] BUG: kernel NULL pointer dereference, address: 0000000000000000
[   25.363528] #PF: supervisor instruction fetch in kernel mode
[   25.363529] #PF: error_code(0x0010) - not-present page
[   25.363530] PGD 0 P4D 0 
[   25.363533] Oops: 0010 [#2] SMP NOPTI
[   25.363536] CPU: 2 PID: 138 Comm: irq/25-AMD-Vi Tainted: G      D    OE     5.9.16-200.fc33.x86_64 #1
[   25.363537] Hardware name: Gigabyte Technology Co., Ltd. AB350-Gaming 3/AB350-Gaming 3-CF, BIOS F51b 07/02/2020
[   25.363540] RIP: 0010:0x0
[   25.363543] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[   25.363545] RSP: 0018:ffffbb19403e7ec0 EFLAGS: 00010246
[   25.363547] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[   25.363548] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffbb19403e7ed0
[   25.363550] RBP: ffff96db7c364d80 R08: ffffffffb7a5a9a0 R09: ffffbb19403e7b58
[   25.363552] R10: 0000000000000000 R11: ffffbb19403e7b5d R12: ffff96db7c36593c
[   25.363553] R13: 0000000000000001 R14: 0000000000000001 R15: ffff96db7c364d80
[   25.363555] FS:  0000000000000000(0000) GS:ffff96db7e880000(0000) knlGS:0000000000000000
[   25.363557] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   25.363559] CR2: ffffffffffffffd6 CR3: 00000003a9d24000 CR4: 00000000003506e0
[   25.363560] Call Trace:
[   25.363564]  task_work_run+0x65/0xa0
[   25.363569]  do_exit+0x352/0xae0
[   25.363572]  ? kthread+0x11b/0x140
[   25.363575]  rewind_stack_do_exit+0x17/0x20
[   25.363578] RIP: 0000:0x0
[   25.363580] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[   25.363582] RSP: 0000:0000000000000000 EFLAGS: 00000000 ORIG_RAX: 0000000000000000
[   25.363584] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[   25.363585] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[   25.363587] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[   25.363588] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[   25.363590] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[   25.363592] Modules linked in: rfcomm ccm nft_objref nf_conntrack_netbios_ns nf_conntrack_broadcast cmac nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_raw iptable_security ip_set nf_tables nfnetlink ip6table_filter ip6_tables iptable_filter vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) bnep it87 hwmon_vid sunrpc vfat fat snd_hda_codec_realtek snd_hda_codec_generic iwlmvm ledtrig_audio snd_hda_codec_hdmi snd_hda_intel mac80211 snd_intel_dspcfg snd_usb_audio snd_hda_codec joydev libarc4 snd_usbmidi_lib pktcdvd snd_hda_core btusb snd_rawmidi iwlwifi edac_mce_amd snd_hwdep btrtl mc snd_seq btbcm kvm_amd btintel snd_seq_device snd_pcm bluetooth kvm snd_timer snd cfg80211 ecdh_generic ecc irqbypass rapl wmi_bmof sp5100_tco soundcore pcspkr i2c_piix4 k10temp rfkill gpio_amdpt
[   25.363619]  gpio_generic acpi_cpufreq binfmt_misc zram ip_tables amdgpu ccp iommu_v2 gpu_sched i2c_algo_bit ttm crct10dif_pclmul crc32_pclmul crc32c_intel drm_kms_helper ghash_clmulni_intel cec drm nvme nvme_core r8169 wmi pinctrl_amd fuse i2c_dev
[   25.363630] CR2: 0000000000000000
[   25.363632] ---[ end trace c902326bee6751f7 ]---
[   25.363634] RIP: 0010:amd_iommu_int_thread+0x16c/0x410
[   25.363637] Code: d2 31 ff 66 44 89 54 24 14 0f b6 ec 45 0f b7 e4 89 ee e8 d7 89 ef ff 49 89 c7 48 85 c0 0f 84 2a 01 00 00 48 8b 80 90 03 00 00 <48> 8b 78 38 48 85 ff 74 18 48 83 c7 48 48 c7 c6 10 fc 0e b7 e8 5b
[   25.363639] RSP: 0018:ffffbb19403e7e38 EFLAGS: 00010286
[   25.363641] RAX: 0000000000000000 RBX: 0000000000000010 RCX: ffffffffb6671770
[   25.363643] RDX: ffff96db7c7b7038 RSI: ffff96db7c35d000 RDI: 0000000000000000
[   25.363645] RBP: 0000000000000000 R08: ffff96db7c14f8a0 R09: 0000000000000003
[   25.363646] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[   25.363648] R13: 00000003efb70000 R14: 0000000000000070 R15: ffff96db7c35d000
[   25.363650] FS:  0000000000000000(0000) GS:ffff96db7e880000(0000) knlGS:0000000000000000
[   25.363652] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   25.363653] CR2: ffffffffffffffd6 CR3: 00000003a9d24000 CR4: 00000000003506e0
[   25.363655] Fixing recursive fault but reboot is needed!
[   35.805010] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring gfx timeout, signaled seq=2249, emitted seq=2251
[   35.805172] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* Process information: process plasmashell pid 1553 thread plasmashel:cs0 pid 1782
[   35.805179] amdgpu 0000:09:00.0: amdgpu: GPU reset begin!
[   36.483330] amdgpu 0000:09:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring kiq_2.1.0 test failed (-110)
[   36.483478] [drm:gfx_v8_0_hw_fini [amdgpu]] *ERROR* KCQ disable failed
[   36.792870] amdgpu: cp is busy, skip halt cp
[   37.102217] amdgpu: rlc is busy, skip halt rlc
[   37.103251] amdgpu 0000:09:00.0: amdgpu: GPU BACO reset
[   37.274808] amdgpu 0000:09:00.0: amdgpu: GPU reset succeeded, trying to resume
[   37.276896] [drm] PCIE GART of 256M enabled (table at 0x000000F400300000).
[   37.276913] [drm] VRAM is lost due to GPU reset!
[   37.640645] amdgpu 0000:09:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring gfx test failed (-110)
[   37.640776] [drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <gfx_v8_0> failed -110
[   37.640846] amdgpu 0000:09:00.0: amdgpu: GPU reset(2) failed
[   37.654888] amdgpu 0000:09:00.0: amdgpu: GPU reset end with ret = -110
[   48.082709] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring gfx timeout, but soft recovered
[   58.322410] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring gfx timeout, but soft recovered

/var/log/Xorg.0.log:

[    12.750] (--) Log file renamed from "/var/log/Xorg.pid-1301.log" to "/var/log/Xorg.0.log"
[    12.751] 
X.Org X Server 1.20.10
X Protocol Version 11, Revision 0
[    12.751] Build Operating System:  5.7.11-200.fc32.x86_64 
[    12.751] Current Operating System: Linux Vorahk-PC.local 5.9.16-200.fc33.x86_64 #1 SMP Mon Dec 21 14:08:22 UTC 2020 x86_64
[    12.751] Kernel command line: BOOT_IMAGE=(hd2,gpt2)/vmlinuz-5.9.16-200.fc33.x86_64 root=UUID=eb277b8e-ba9b-4866-a74a-48f15117bbbb ro resume=UUID=aeb38ad4-9309-4c96-bfbb-d1217c4526c5 rhgb quiet amdgpu.ppfeaturemask=0xffffffff
[    12.751] Build Date: 02 December 2020  12:00:00AM
[    12.751] Build ID: xorg-x11-server 1.20.10-1.fc33 
[    12.751] Current version of pixman: 0.40.0
[    12.751] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    12.751] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    12.751] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan  8 08:04:48 2021
[    12.752] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    12.752] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    12.753] (==) No Layout section.  Using the first Screen section.
[    12.753] (==) No screen section available. Using defaults.
[    12.753] (**) |-->Screen "Default Screen Section" (0)
[    12.753] (**) |   |-->Monitor "<default monitor>"
[    12.754] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    12.754] (==) Automatically adding devices
[    12.754] (==) Automatically enabling devices
[    12.754] (==) Automatically adding GPU devices
[    12.754] (==) Automatically binding GPU devices
[    12.754] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    12.754] (==) FontPath set to:
	catalogue:/etc/X11/fontpath.d,
	built-ins
[    12.754] (==) ModulePath set to "/usr/lib64/xorg/modules"
[    12.754] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    12.754] (II) Loader magic: 0x55e582433b20
[    12.754] (II) Module ABI versions:
[    12.754] 	X.Org ANSI C Emulation: 0.4
[    12.754] 	X.Org Video Driver: 24.1
[    12.754] 	X.Org XInput driver : 24.1
[    12.754] 	X.Org Server Extension : 10.0
[    12.754] (++) using VT number 1

[    12.754] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    12.755] (II) xfree86: Adding drm device (/dev/dri/card0)
[    12.863] (--) PCI:*(9@0:0:0) 1002:67df:1da2:e366 rev 231, Mem @ 0x500000000/4294967296, 0x480000000/2097152, 0xfce00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[    12.863] (II) LoadModule: "glx"
[    12.864] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    12.869] (II) Module glx: vendor="X.Org Foundation"
[    12.869] 	compiled for 1.20.10, module version = 1.0.0
[    12.869] 	ABI class: X.Org Server Extension, version 10.0
[    12.869] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[    12.869] 	loading driver: amdgpu
[    12.869] (==) Matched amdgpu as autoconfigured driver 0
[    12.869] (==) Matched ati as autoconfigured driver 1
[    12.869] (==) Matched modesetting as autoconfigured driver 2
[    12.869] (==) Matched fbdev as autoconfigured driver 3
[    12.869] (==) Matched vesa as autoconfigured driver 4
[    12.869] (==) Assigned the driver to the xf86ConfigLayout
[    12.869] (II) LoadModule: "amdgpu"
[    12.869] (II) Loading /usr/lib64/xorg/modules/drivers/amdgpu_drv.so
[    12.872] (II) Module amdgpu: vendor="X.Org Foundation"
[    12.872] 	compiled for 1.20.8, module version = 19.1.0
[    12.872] 	Module class: X.Org Video Driver
[    12.872] 	ABI class: X.Org Video Driver, version 24.1
[    12.872] (II) LoadModule: "ati"
[    12.872] (II) Loading /usr/lib64/xorg/modules/drivers/ati_drv.so
[    12.872] (II) Module ati: vendor="X.Org Foundation"
[    12.872] 	compiled for 1.20.8, module version = 19.1.0
[    12.872] 	Module class: X.Org Video Driver
[    12.872] 	ABI class: X.Org Video Driver, version 24.1
[    12.876] (II) LoadModule: "modesetting"
[    12.876] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[    12.877] (II) Module modesetting: vendor="X.Org Foundation"
[    12.877] 	compiled for 1.20.10, module version = 1.20.10
[    12.877] 	Module class: X.Org Video Driver
[    12.877] 	ABI class: X.Org Video Driver, version 24.1
[    12.877] (II) LoadModule: "fbdev"
[    12.877] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[    12.877] (II) Module fbdev: vendor="X.Org Foundation"
[    12.877] 	compiled for 1.20.8, module version = 0.5.0
[    12.877] 	Module class: X.Org Video Driver
[    12.878] 	ABI class: X.Org Video Driver, version 24.1
[    12.878] (II) LoadModule: "vesa"
[    12.878] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[    12.878] (II) Module vesa: vendor="X.Org Foundation"
[    12.878] 	compiled for 1.20.8, module version = 2.4.0
[    12.878] 	Module class: X.Org Video Driver
[    12.878] 	ABI class: X.Org Video Driver, version 24.1
[    12.878] (II) AMDGPU: Driver for AMD Radeon:
	All GPUs supported by the amdgpu kernel driver
[    12.878] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    12.878] (II) FBDEV: driver for framebuffer: fbdev
[    12.878] (II) VESA: driver for VESA chipsets: vesa
[    12.879] (II) AMDGPU(0): [KMS] Kernel modesetting enabled.
[    12.879] (WW) Falling back to old probe method for modesetting
[    12.879] (WW) Falling back to old probe method for fbdev
[    12.879] (II) Loading sub module "fbdevhw"
[    12.879] (II) LoadModule: "fbdevhw"
[    12.879] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[    12.880] (II) Module fbdevhw: vendor="X.Org Foundation"
[    12.880] 	compiled for 1.20.10, module version = 0.0.2
[    12.880] 	ABI class: X.Org Video Driver, version 24.1
[    12.880] (II) AMDGPU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    12.880] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[    12.880] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    12.880] (==) AMDGPU(0): Default visual is TrueColor
[    12.880] (==) AMDGPU(0): RGB weight 888
[    12.880] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[    12.880] (--) AMDGPU(0): Chipset: "Radeon RX 580 Series" (ChipID = 0x67df)
[    12.880] (II) Loading sub module "fb"
[    12.880] (II) LoadModule: "fb"
[    12.880] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    12.881] (II) Module fb: vendor="X.Org Foundation"
[    12.881] 	compiled for 1.20.10, module version = 1.0.0
[    12.881] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    12.881] (II) Loading sub module "dri2"
[    12.881] (II) LoadModule: "dri2"
[    12.881] (II) Module "dri2" already built-in
[    12.988] (II) Loading sub module "glamoregl"
[    12.988] (II) LoadModule: "glamoregl"
[    12.988] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[    12.993] (II) Module glamoregl: vendor="X.Org Foundation"
[    12.993] 	compiled for 1.20.10, module version = 1.0.1
[    12.993] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    13.014] (II) AMDGPU(0): glamor X acceleration enabled on Radeon RX 580 Series (POLARIS10, DRM 3.39.0, 5.9.16-200.fc33.x86_64, LLVM 11.0.0)
[    13.014] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[    13.014] (==) AMDGPU(0): TearFree property default: auto
[    13.014] (==) AMDGPU(0): VariableRefresh: disabled
[    13.014] (II) AMDGPU(0): KMS Pageflipping: enabled
[    13.014] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[    13.014] (II) AMDGPU(0): Output DisplayPort-1 has no monitor section
[    13.015] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[    13.015] (II) AMDGPU(0): Output HDMI-A-1 has no monitor section
[    13.016] (II) AMDGPU(0): Output DVI-D-0 has no monitor section
[    13.060] (II) AMDGPU(0): EDID for output DisplayPort-0
[    13.060] (II) AMDGPU(0): EDID for output DisplayPort-1
[    13.061] (II) AMDGPU(0): EDID for output HDMI-A-0
[    13.061] (II) AMDGPU(0): Manufacturer: BNQ  Model: 78e4  Serial#: 21573
[    13.061] (II) AMDGPU(0): Year: 2019  Week: 16
[    13.061] (II) AMDGPU(0): EDID Version: 1.3
[    13.061] (II) AMDGPU(0): Digital Display Input
[    13.061] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 53  vert.: 30
[    13.061] (II) AMDGPU(0): Gamma: 2.20
[    13.061] (II) AMDGPU(0): DPMS capabilities: Off
[    13.061] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    13.061] (II) AMDGPU(0): Default color space is primary color space
[    13.061] (II) AMDGPU(0): First detailed timing is preferred mode
[    13.061] (II) AMDGPU(0): redX: 0.662 redY: 0.330   greenX: 0.315 greenY: 0.612
[    13.061] (II) AMDGPU(0): blueX: 0.146 blueY: 0.082   whiteX: 0.313 whiteY: 0.329
[    13.061] (II) AMDGPU(0): Supported established timings:
[    13.061] (II) AMDGPU(0): 720x400@70Hz
[    13.061] (II) AMDGPU(0): 640x480@60Hz
[    13.061] (II) AMDGPU(0): 640x480@75Hz
[    13.061] (II) AMDGPU(0): 800x600@60Hz
[    13.061] (II) AMDGPU(0): 800x600@75Hz
[    13.061] (II) AMDGPU(0): 832x624@75Hz
[    13.061] (II) AMDGPU(0): 1024x768@60Hz
[    13.061] (II) AMDGPU(0): 1024x768@75Hz
[    13.061] (II) AMDGPU(0): 1280x1024@75Hz
[    13.061] (II) AMDGPU(0): 1152x864@75Hz
[    13.061] (II) AMDGPU(0): Manufacturer's mask: 0
[    13.061] (II) AMDGPU(0): Supported standard timings:
[    13.061] (II) AMDGPU(0): #0: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    13.061] (II) AMDGPU(0): #1: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    13.061] (II) AMDGPU(0): #2: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    13.061] (II) AMDGPU(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    13.061] (II) AMDGPU(0): #4: hsize: 1600  vsize 900  refresh: 60  vid: 49321
[    13.061] (II) AMDGPU(0): #5: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    13.061] (II) AMDGPU(0): Supported detailed timing:
[    13.061] (II) AMDGPU(0): clock: 148.5 MHz   Image Size:  527 x 296 mm
[    13.061] (II) AMDGPU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    13.061] (II) AMDGPU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    13.061] (II) AMDGPU(0): Serial No: R4K01992SL0
[    13.061] (II) AMDGPU(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[    13.061] (II) AMDGPU(0): Monitor name: BenQ GW2470
[    13.061] (II) AMDGPU(0): Supported detailed timing:
[    13.061] (II) AMDGPU(0): clock: 148.5 MHz   Image Size:  527 x 296 mm
[    13.061] (II) AMDGPU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    13.061] (II) AMDGPU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    13.061] (II) AMDGPU(0): Supported detailed timing:
[    13.061] (II) AMDGPU(0): clock: 74.2 MHz   Image Size:  527 x 296 mm
[    13.061] (II) AMDGPU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    13.061] (II) AMDGPU(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
[    13.061] (II) AMDGPU(0): Supported detailed timing:
[    13.061] (II) AMDGPU(0): clock: 74.2 MHz   Image Size:  527 x 296 mm
[    13.061] (II) AMDGPU(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[    13.061] (II) AMDGPU(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[    13.061] (II) AMDGPU(0): Supported detailed timing:
[    13.061] (II) AMDGPU(0): clock: 27.0 MHz   Image Size:  527 x 296 mm
[    13.061] (II) AMDGPU(0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
[    13.061] (II) AMDGPU(0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
[    13.061] (II) AMDGPU(0): Number of EDID sections to follow: 1
[    13.061] (II) AMDGPU(0): EDID (in hex):
[    13.061] (II) AMDGPU(0): 	00ffffffffffff0009d1e47845540000
[    13.061] (II) AMDGPU(0): 	101d010380351e782eaf45a954509c25
[    13.061] (II) AMDGPU(0): 	155054a56b80d1c081c081008180a9c0
[    13.061] (II) AMDGPU(0): 	b30001010101023a801871382d40582c
[    13.061] (II) AMDGPU(0): 	45000f282100001e000000ff0052344b
[    13.061] (II) AMDGPU(0): 	3031393932534c300a20000000fd0032
[    13.061] (II) AMDGPU(0): 	4c1e5311000a202020202020000000fc
[    13.061] (II) AMDGPU(0): 	0042656e51204757323437300a2001f8
[    13.061] (II) AMDGPU(0): 	020322f14f901f051404130312071615
[    13.061] (II) AMDGPU(0): 	01061102230907078301000065030c00
[    13.061] (II) AMDGPU(0): 	1000023a801871382d40582c45000f28
[    13.061] (II) AMDGPU(0): 	2100001e011d8018711c1620582c2500
[    13.061] (II) AMDGPU(0): 	0f282100009e011d007251d01e206e28
[    13.061] (II) AMDGPU(0): 	55000f282100001e8c0ad08a20e02d10
[    13.061] (II) AMDGPU(0): 	103e96000f2821000018000000000000
[    13.061] (II) AMDGPU(0): 	00000000000000000000000000000005
[    13.061] (II) AMDGPU(0): Printing probed modes for output HDMI-A-0
[    13.061] (II) AMDGPU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    13.061] (II) AMDGPU(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[    13.061] (II) AMDGPU(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[    13.061] (II) AMDGPU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    13.061] (II) AMDGPU(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 +hsync +vsync (60.0 kHz e)
[    13.061] (II) AMDGPU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    13.061] (II) AMDGPU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    13.061] (II) AMDGPU(0): Modeline "1440x900"x60.0  148.50  1440 2008 2052 2200  900 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[    13.061] (II) AMDGPU(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    13.061] (II) AMDGPU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    13.061] (II) AMDGPU(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    13.061] (II) AMDGPU(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    13.061] (II) AMDGPU(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    13.061] (II) AMDGPU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    13.061] (II) AMDGPU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    13.061] (II) AMDGPU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    13.061] (II) AMDGPU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    13.061] (II) AMDGPU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    13.061] (II) AMDGPU(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    13.061] (II) AMDGPU(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    13.061] (II) AMDGPU(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    13.061] (II) AMDGPU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    13.061] (II) AMDGPU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    13.061] (II) AMDGPU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    13.061] (II) AMDGPU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    13.062] (II) AMDGPU(0): EDID for output HDMI-A-1
[    13.062] (II) AMDGPU(0): Manufacturer: BNQ  Model: 78e4  Serial#: 21573
[    13.062] (II) AMDGPU(0): Year: 2019  Week: 16
[    13.062] (II) AMDGPU(0): EDID Version: 1.3
[    13.062] (II) AMDGPU(0): Digital Display Input
[    13.062] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 53  vert.: 30
[    13.062] (II) AMDGPU(0): Gamma: 2.20
[    13.062] (II) AMDGPU(0): DPMS capabilities: Off
[    13.062] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    13.062] (II) AMDGPU(0): Default color space is primary color space
[    13.062] (II) AMDGPU(0): First detailed timing is preferred mode
[    13.062] (II) AMDGPU(0): redX: 0.662 redY: 0.330   greenX: 0.315 greenY: 0.612
[    13.062] (II) AMDGPU(0): blueX: 0.146 blueY: 0.082   whiteX: 0.313 whiteY: 0.329
[    13.062] (II) AMDGPU(0): Supported established timings:
[    13.062] (II) AMDGPU(0): 720x400@70Hz
[    13.062] (II) AMDGPU(0): 640x480@60Hz
[    13.062] (II) AMDGPU(0): 640x480@75Hz
[    13.062] (II) AMDGPU(0): 800x600@60Hz
[    13.062] (II) AMDGPU(0): 800x600@75Hz
[    13.062] (II) AMDGPU(0): 832x624@75Hz
[    13.062] (II) AMDGPU(0): 1024x768@60Hz
[    13.062] (II) AMDGPU(0): 1024x768@75Hz
[    13.062] (II) AMDGPU(0): 1280x1024@75Hz
[    13.062] (II) AMDGPU(0): 1152x864@75Hz
[    13.062] (II) AMDGPU(0): Manufacturer's mask: 0
[    13.062] (II) AMDGPU(0): Supported standard timings:
[    13.062] (II) AMDGPU(0): #0: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    13.062] (II) AMDGPU(0): #1: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    13.062] (II) AMDGPU(0): #2: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    13.062] (II) AMDGPU(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    13.062] (II) AMDGPU(0): #4: hsize: 1600  vsize 900  refresh: 60  vid: 49321
[    13.062] (II) AMDGPU(0): #5: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    13.062] (II) AMDGPU(0): Supported detailed timing:
[    13.062] (II) AMDGPU(0): clock: 148.5 MHz   Image Size:  527 x 296 mm
[    13.062] (II) AMDGPU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    13.062] (II) AMDGPU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    13.062] (II) AMDGPU(0): Serial No: R4K02034SL0
[    13.062] (II) AMDGPU(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[    13.062] (II) AMDGPU(0): Monitor name: BenQ GW2470
[    13.062] (II) AMDGPU(0): Supported detailed timing:
[    13.062] (II) AMDGPU(0): clock: 148.5 MHz   Image Size:  527 x 296 mm
[    13.062] (II) AMDGPU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    13.062] (II) AMDGPU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    13.062] (II) AMDGPU(0): Supported detailed timing:
[    13.062] (II) AMDGPU(0): clock: 74.2 MHz   Image Size:  527 x 296 mm
[    13.062] (II) AMDGPU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    13.062] (II) AMDGPU(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
[    13.062] (II) AMDGPU(0): Supported detailed timing:
[    13.062] (II) AMDGPU(0): clock: 74.2 MHz   Image Size:  527 x 296 mm
[    13.062] (II) AMDGPU(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[    13.062] (II) AMDGPU(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[    13.062] (II) AMDGPU(0): Supported detailed timing:
[    13.062] (II) AMDGPU(0): clock: 27.0 MHz   Image Size:  527 x 296 mm
[    13.062] (II) AMDGPU(0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
[    13.062] (II) AMDGPU(0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
[    13.062] (II) AMDGPU(0): Number of EDID sections to follow: 1
[    13.062] (II) AMDGPU(0): EDID (in hex):
[    13.062] (II) AMDGPU(0): 	00ffffffffffff0009d1e47845540000
[    13.062] (II) AMDGPU(0): 	101d010380351e782eaf45a954509c25
[    13.062] (II) AMDGPU(0): 	155054a56b80d1c081c081008180a9c0
[    13.062] (II) AMDGPU(0): 	b30001010101023a801871382d40582c
[    13.062] (II) AMDGPU(0): 	45000f282100001e000000ff0052344b
[    13.062] (II) AMDGPU(0): 	3032303334534c300a20000000fd0032
[    13.062] (II) AMDGPU(0): 	4c1e5311000a202020202020000000fc
[    13.062] (II) AMDGPU(0): 	0042656e51204757323437300a200104
[    13.062] (II) AMDGPU(0): 	020322f14f901f051404130312071615
[    13.062] (II) AMDGPU(0): 	01061102230907078301000065030c00
[    13.062] (II) AMDGPU(0): 	1000023a801871382d40582c45000f28
[    13.062] (II) AMDGPU(0): 	2100001e011d8018711c1620582c2500
[    13.062] (II) AMDGPU(0): 	0f282100009e011d007251d01e206e28
[    13.062] (II) AMDGPU(0): 	55000f282100001e8c0ad08a20e02d10
[    13.062] (II) AMDGPU(0): 	103e96000f2821000018000000000000
[    13.062] (II) AMDGPU(0): 	00000000000000000000000000000005
[    13.062] (II) AMDGPU(0): Printing probed modes for output HDMI-A-1
[    13.062] (II) AMDGPU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    13.062] (II) AMDGPU(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[    13.062] (II) AMDGPU(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[    13.062] (II) AMDGPU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    13.062] (II) AMDGPU(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 +hsync +vsync (60.0 kHz e)
[    13.062] (II) AMDGPU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    13.062] (II) AMDGPU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    13.062] (II) AMDGPU(0): Modeline "1440x900"x60.0  148.50  1440 2008 2052 2200  900 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[    13.062] (II) AMDGPU(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    13.062] (II) AMDGPU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    13.062] (II) AMDGPU(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    13.062] (II) AMDGPU(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    13.062] (II) AMDGPU(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    13.062] (II) AMDGPU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    13.062] (II) AMDGPU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    13.062] (II) AMDGPU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    13.062] (II) AMDGPU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    13.062] (II) AMDGPU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    13.062] (II) AMDGPU(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    13.062] (II) AMDGPU(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    13.062] (II) AMDGPU(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    13.062] (II) AMDGPU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    13.062] (II) AMDGPU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    13.062] (II) AMDGPU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    13.062] (II) AMDGPU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    13.063] (II) AMDGPU(0): EDID for output DVI-D-0
[    13.063] (II) AMDGPU(0): Manufacturer: BNQ  Model: 78e4  Serial#: 21573
[    13.063] (II) AMDGPU(0): Year: 2019  Week: 16
[    13.063] (II) AMDGPU(0): EDID Version: 1.3
[    13.063] (II) AMDGPU(0): Digital Display Input
[    13.063] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 53  vert.: 30
[    13.063] (II) AMDGPU(0): Gamma: 2.20
[    13.063] (II) AMDGPU(0): DPMS capabilities: Off
[    13.063] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    13.063] (II) AMDGPU(0): Default color space is primary color space
[    13.063] (II) AMDGPU(0): First detailed timing is preferred mode
[    13.063] (II) AMDGPU(0): redX: 0.662 redY: 0.330   greenX: 0.315 greenY: 0.612
[    13.063] (II) AMDGPU(0): blueX: 0.146 blueY: 0.082   whiteX: 0.313 whiteY: 0.329
[    13.063] (II) AMDGPU(0): Supported established timings:
[    13.063] (II) AMDGPU(0): 720x400@70Hz
[    13.063] (II) AMDGPU(0): 640x480@60Hz
[    13.063] (II) AMDGPU(0): 640x480@75Hz
[    13.063] (II) AMDGPU(0): 800x600@60Hz
[    13.063] (II) AMDGPU(0): 800x600@75Hz
[    13.063] (II) AMDGPU(0): 832x624@75Hz
[    13.063] (II) AMDGPU(0): 1024x768@60Hz
[    13.063] (II) AMDGPU(0): 1024x768@75Hz
[    13.063] (II) AMDGPU(0): 1280x1024@75Hz
[    13.063] (II) AMDGPU(0): 1152x864@75Hz
[    13.063] (II) AMDGPU(0): Manufacturer's mask: 0
[    13.063] (II) AMDGPU(0): Supported standard timings:
[    13.063] (II) AMDGPU(0): #0: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    13.063] (II) AMDGPU(0): #1: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    13.063] (II) AMDGPU(0): #2: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    13.063] (II) AMDGPU(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    13.063] (II) AMDGPU(0): #4: hsize: 1600  vsize 900  refresh: 60  vid: 49321
[    13.063] (II) AMDGPU(0): #5: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    13.063] (II) AMDGPU(0): Supported detailed timing:
[    13.063] (II) AMDGPU(0): clock: 148.5 MHz   Image Size:  527 x 296 mm
[    13.063] (II) AMDGPU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    13.063] (II) AMDGPU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    13.063] (II) AMDGPU(0): Serial No: R4K01989SL0
[    13.063] (II) AMDGPU(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[    13.063] (II) AMDGPU(0): Monitor name: BenQ GW2470
[    13.063] (II) AMDGPU(0): Supported detailed timing:
[    13.063] (II) AMDGPU(0): clock: 148.5 MHz   Image Size:  527 x 296 mm
[    13.063] (II) AMDGPU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    13.063] (II) AMDGPU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    13.063] (II) AMDGPU(0): Supported detailed timing:
[    13.063] (II) AMDGPU(0): clock: 74.2 MHz   Image Size:  527 x 296 mm
[    13.063] (II) AMDGPU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    13.063] (II) AMDGPU(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
[    13.063] (II) AMDGPU(0): Supported detailed timing:
[    13.063] (II) AMDGPU(0): clock: 74.2 MHz   Image Size:  527 x 296 mm
[    13.063] (II) AMDGPU(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[    13.063] (II) AMDGPU(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[    13.063] (II) AMDGPU(0): Supported detailed timing:
[    13.063] (II) AMDGPU(0): clock: 27.0 MHz   Image Size:  527 x 296 mm
[    13.063] (II) AMDGPU(0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
[    13.063] (II) AMDGPU(0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
[    13.063] (II) AMDGPU(0): Number of EDID sections to follow: 1
[    13.063] (II) AMDGPU(0): EDID (in hex):
[    13.063] (II) AMDGPU(0): 	00ffffffffffff0009d1e47845540000
[    13.063] (II) AMDGPU(0): 	101d010380351e782eaf45a954509c25
[    13.063] (II) AMDGPU(0): 	155054a56b80d1c081c081008180a9c0
[    13.063] (II) AMDGPU(0): 	b30001010101023a801871382d40582c
[    13.063] (II) AMDGPU(0): 	45000f282100001e000000ff0052344b
[    13.063] (II) AMDGPU(0): 	3031393839534c300a20000000fd0032
[    13.063] (II) AMDGPU(0): 	4c1e5311000a202020202020000000fc
[    13.063] (II) AMDGPU(0): 	0042656e51204757323437300a2001f2
[    13.063] (II) AMDGPU(0): 	020322f14f901f051404130312071615
[    13.063] (II) AMDGPU(0): 	01061102230907078301000065030c00
[    13.063] (II) AMDGPU(0): 	1000023a801871382d40582c45000f28
[    13.063] (II) AMDGPU(0): 	2100001e011d8018711c1620582c2500
[    13.063] (II) AMDGPU(0): 	0f282100009e011d007251d01e206e28
[    13.063] (II) AMDGPU(0): 	55000f282100001e8c0ad08a20e02d10
[    13.063] (II) AMDGPU(0): 	103e96000f2821000018000000000000
[    13.063] (II) AMDGPU(0): 	00000000000000000000000000000005
[    13.063] (II) AMDGPU(0): Printing probed modes for output DVI-D-0
[    13.063] (II) AMDGPU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    13.063] (II) AMDGPU(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[    13.063] (II) AMDGPU(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[    13.063] (II) AMDGPU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    13.063] (II) AMDGPU(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 +hsync +vsync (60.0 kHz e)
[    13.063] (II) AMDGPU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    13.063] (II) AMDGPU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    13.063] (II) AMDGPU(0): Modeline "1440x900"x60.0  148.50  1440 2008 2052 2200  900 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[    13.063] (II) AMDGPU(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    13.063] (II) AMDGPU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    13.063] (II) AMDGPU(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    13.063] (II) AMDGPU(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    13.063] (II) AMDGPU(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    13.063] (II) AMDGPU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    13.063] (II) AMDGPU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    13.063] (II) AMDGPU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    13.063] (II) AMDGPU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    13.063] (II) AMDGPU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    13.063] (II) AMDGPU(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    13.063] (II) AMDGPU(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    13.063] (II) AMDGPU(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    13.063] (II) AMDGPU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    13.063] (II) AMDGPU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    13.063] (II) AMDGPU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    13.063] (II) AMDGPU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    13.063] (II) AMDGPU(0): Output DisplayPort-0 disconnected
[    13.063] (II) AMDGPU(0): Output DisplayPort-1 disconnected
[    13.063] (II) AMDGPU(0): Output HDMI-A-0 connected
[    13.063] (II) AMDGPU(0): Output HDMI-A-1 connected
[    13.063] (II) AMDGPU(0): Output DVI-D-0 connected
[    13.063] (II) AMDGPU(0): Using spanning desktop for initial modes
[    13.063] (II) AMDGPU(0): Output HDMI-A-0 using initial mode 1920x1080 +0+0
[    13.063] (II) AMDGPU(0): Output HDMI-A-1 using initial mode 1920x1080 +1920+0
[    13.063] (II) AMDGPU(0): Output DVI-D-0 using initial mode 1920x1080 +3840+0
[    13.063] (II) AMDGPU(0): mem size init: gart size :ff86f000 vram size: s:feea6000 visible:feea6000
[    13.063] (==) AMDGPU(0): DPI set to (96, 96)
[    13.063] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[    13.063] (II) Loading sub module "ramdac"
[    13.063] (II) LoadModule: "ramdac"
[    13.063] (II) Module "ramdac" already built-in
[    13.063] (II) UnloadModule: "modesetting"
[    13.063] (II) Unloading modesetting
[    13.064] (II) UnloadModule: "fbdev"
[    13.064] (II) Unloading fbdev
[    13.064] (II) UnloadSubModule: "fbdevhw"
[    13.064] (II) Unloading fbdevhw
[    13.064] (II) UnloadModule: "vesa"
[    13.064] (II) Unloading vesa
[    13.064] (II) AMDGPU(0): [DRI2] Setup complete
[    13.064] (II) AMDGPU(0): [DRI2]   DRI driver: radeonsi
[    13.064] (II) AMDGPU(0): [DRI2]   VDPAU driver: radeonsi
[    13.064] (II) AMDGPU(0): Front buffer pitch: 23552 bytes
[    13.065] (II) AMDGPU(0): SYNC extension fences enabled
[    13.065] (II) AMDGPU(0): Present extension enabled
[    13.065] (==) AMDGPU(0): DRI3 enabled
[    13.065] (==) AMDGPU(0): Backing store enabled
[    13.065] (II) AMDGPU(0): Direct rendering enabled
[    13.075] (II) AMDGPU(0): Use GLAMOR acceleration.
[    13.075] (II) AMDGPU(0): Acceleration enabled
[    13.075] (==) AMDGPU(0): DPMS enabled
[    13.075] (==) AMDGPU(0): Silken mouse enabled
[    13.075] (II) AMDGPU(0): Set up textured video (glamor)
[    13.128] (II) Initializing extension Generic Event Extension
[    13.128] (II) Initializing extension SHAPE
[    13.128] (II) Initializing extension MIT-SHM
[    13.128] (II) Initializing extension XInputExtension
[    13.128] (II) Initializing extension XTEST
[    13.129] (II) Initializing extension BIG-REQUESTS
[    13.129] (II) Initializing extension SYNC
[    13.129] (II) Initializing extension XKEYBOARD
[    13.129] (II) Initializing extension XC-MISC
[    13.129] (II) Initializing extension SECURITY
[    13.129] (II) Initializing extension XFIXES
[    13.130] (II) Initializing extension RENDER
[    13.130] (II) Initializing extension RANDR
[    13.130] (II) Initializing extension COMPOSITE
[    13.130] (II) Initializing extension DAMAGE
[    13.131] (II) Initializing extension MIT-SCREEN-SAVER
[    13.131] (II) Initializing extension DOUBLE-BUFFER
[    13.131] (II) Initializing extension RECORD
[    13.131] (II) Initializing extension DPMS
[    13.131] (II) Initializing extension Present
[    13.131] (II) Initializing extension DRI3
[    13.132] (II) Initializing extension X-Resource
[    13.132] (II) Initializing extension XVideo
[    13.132] (II) Initializing extension XVideo-MotionCompensation
[    13.132] (II) Initializing extension SELinux
[    13.132] (II) SELinux: Disabled by boolean
[    13.132] (II) Initializing extension GLX
[    13.142] (II) AIGLX: Loaded and initialized radeonsi
[    13.142] (II) GLX: Initialized DRI2 GL provider for screen 0
[    13.142] (II) Initializing extension XFree86-VidModeExtension
[    13.143] (II) Initializing extension XFree86-DGA
[    13.143] (II) Initializing extension XFree86-DRI
[    13.143] (II) Initializing extension DRI2
[    13.147] (II) AMDGPU(0): Setting screen physical size to 1524 x 285
[    13.274] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    13.274] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    13.274] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    13.274] (**) Power Button: Applying InputClass "system-keyboard"
[    13.274] (II) LoadModule: "libinput"
[    13.275] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[    13.280] (II) Module libinput: vendor="X.Org Foundation"
[    13.280] 	compiled for 1.20.8, module version = 0.30.0
[    13.280] 	Module class: X.Org XInput Driver
[    13.280] 	ABI class: X.Org XInput driver, version 24.1
[    13.280] (II) Using input driver 'libinput' for 'Power Button'
[    13.280] (**) Power Button: always reports core events
[    13.280] (**) Option "Device" "/dev/input/event1"
[    13.280] (**) Option "_source" "server/udev"
[    13.285] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    13.285] (II) event1  - Power Button: device is a keyboard
[    13.286] (II) event1  - Power Button: device removed
[    13.292] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    13.292] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    13.292] (**) Option "xkb_layout" "fr"
[    13.292] (**) Option "xkb_variant" "oss"
[    13.322] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    13.322] (II) event1  - Power Button: device is a keyboard
[    13.322] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    13.322] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    13.322] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    13.322] (**) Power Button: Applying InputClass "system-keyboard"
[    13.322] (II) Using input driver 'libinput' for 'Power Button'
[    13.322] (**) Power Button: always reports core events
[    13.322] (**) Option "Device" "/dev/input/event0"
[    13.322] (**) Option "_source" "server/udev"
[    13.323] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    13.323] (II) event0  - Power Button: device is a keyboard
[    13.323] (II) event0  - Power Button: device removed
[    13.330] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    13.330] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    13.330] (**) Option "xkb_layout" "fr"
[    13.330] (**) Option "xkb_variant" "oss"
[    13.330] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    13.330] (II) event0  - Power Button: device is a keyboard
[    13.331] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event10)
[    13.331] (II) No input driver specified, ignoring this device.
[    13.331] (II) This device may have been added with another device file.
[    13.331] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event11)
[    13.331] (II) No input driver specified, ignoring this device.
[    13.331] (II) This device may have been added with another device file.
[    13.332] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event12)
[    13.332] (II) No input driver specified, ignoring this device.
[    13.332] (II) This device may have been added with another device file.
[    13.332] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event13)
[    13.332] (II) No input driver specified, ignoring this device.
[    13.332] (II) This device may have been added with another device file.
[    13.332] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event14)
[    13.332] (II) No input driver specified, ignoring this device.
[    13.332] (II) This device may have been added with another device file.
[    13.332] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event15)
[    13.332] (II) No input driver specified, ignoring this device.
[    13.332] (II) This device may have been added with another device file.
[    13.333] (II) config/udev: Adding input device C-Media Electronics Inc.       USB PnP Sound Device (/dev/input/event2)
[    13.333] (**) C-Media Electronics Inc.       USB PnP Sound Device: Applying InputClass "evdev keyboard catchall"
[    13.333] (**) C-Media Electronics Inc.       USB PnP Sound Device: Applying InputClass "libinput keyboard catchall"
[    13.333] (**) C-Media Electronics Inc.       USB PnP Sound Device: Applying InputClass "system-keyboard"
[    13.333] (II) Using input driver 'libinput' for 'C-Media Electronics Inc.       USB PnP Sound Device'
[    13.333] (**) C-Media Electronics Inc.       USB PnP Sound Device: always reports core events
[    13.333] (**) Option "Device" "/dev/input/event2"
[    13.333] (**) Option "_source" "server/udev"
[    13.334] (II) event2  - C-Media Electronics Inc.       USB PnP Sound Device: is tagged by udev as: Keyboard
[    13.334] (II) event2  - C-Media Electronics Inc.       USB PnP Sound Device: device is a keyboard
[    13.334] (II) event2  - C-Media Electronics Inc.       USB PnP Sound Device: device removed
[    13.354] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-1/3-1.1/3-1.1:1.3/0003:0D8C:013C.0001/input/input2/event2"
[    13.354] (II) XINPUT: Adding extended input device "C-Media Electronics Inc.       USB PnP Sound Device" (type: KEYBOARD, id 8)
[    13.354] (**) Option "xkb_layout" "fr"
[    13.354] (**) Option "xkb_variant" "oss"
[    13.355] (II) event2  - C-Media Electronics Inc.       USB PnP Sound Device: is tagged by udev as: Keyboard
[    13.355] (II) event2  - C-Media Electronics Inc.       USB PnP Sound Device: device is a keyboard
[    13.356] (II) config/udev: Adding input device CoolerMaster SENTINEL III (/dev/input/event3)
[    13.356] (**) CoolerMaster SENTINEL III: Applying InputClass "evdev pointer catchall"
[    13.356] (**) CoolerMaster SENTINEL III: Applying InputClass "libinput pointer catchall"
[    13.356] (II) Using input driver 'libinput' for 'CoolerMaster SENTINEL III'
[    13.356] (**) CoolerMaster SENTINEL III: always reports core events
[    13.356] (**) Option "Device" "/dev/input/event3"
[    13.356] (**) Option "_source" "server/udev"
[    13.410] (II) event3  - CoolerMaster SENTINEL III: is tagged by udev as: Mouse
[    13.411] (II) event3  - CoolerMaster SENTINEL III: device is a pointer
[    13.411] (II) event3  - CoolerMaster SENTINEL III: device removed
[    13.430] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-1/3-1.4/3-1.4.1/3-1.4.1:1.0/0003:2516:0034.0002/input/input3/event3"
[    13.430] (II) XINPUT: Adding extended input device "CoolerMaster SENTINEL III" (type: MOUSE, id 9)
[    13.430] (**) Option "AccelerationScheme" "none"
[    13.430] (**) CoolerMaster SENTINEL III: (accel) selected scheme none/0
[    13.430] (**) CoolerMaster SENTINEL III: (accel) acceleration factor: 2.000
[    13.430] (**) CoolerMaster SENTINEL III: (accel) acceleration threshold: 4
[    13.483] (II) event3  - CoolerMaster SENTINEL III: is tagged by udev as: Mouse
[    13.483] (II) event3  - CoolerMaster SENTINEL III: device is a pointer
[    13.484] (II) config/udev: Adding input device CoolerMaster SENTINEL III (/dev/input/mouse0)
[    13.484] (II) No input driver specified, ignoring this device.
[    13.484] (II) This device may have been added with another device file.
[    13.484] (II) config/udev: Adding input device CoolerMaster SENTINEL III Keyboard (/dev/input/event4)
[    13.484] (**) CoolerMaster SENTINEL III Keyboard: Applying InputClass "evdev keyboard catchall"
[    13.484] (**) CoolerMaster SENTINEL III Keyboard: Applying InputClass "libinput keyboard catchall"
[    13.484] (**) CoolerMaster SENTINEL III Keyboard: Applying InputClass "system-keyboard"
[    13.484] (II) Using input driver 'libinput' for 'CoolerMaster SENTINEL III Keyboard'
[    13.485] (**) CoolerMaster SENTINEL III Keyboard: always reports core events
[    13.485] (**) Option "Device" "/dev/input/event4"
[    13.485] (**) Option "_source" "server/udev"
[    13.486] (II) event4  - CoolerMaster SENTINEL III Keyboard: is tagged by udev as: Keyboard
[    13.486] (II) event4  - CoolerMaster SENTINEL III Keyboard: device is a keyboard
[    13.486] (II) event4  - CoolerMaster SENTINEL III Keyboard: device removed
[    13.495] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-1/3-1.4/3-1.4.1/3-1.4.1:1.1/0003:2516:0034.0003/input/input4/event4"
[    13.495] (II) XINPUT: Adding extended input device "CoolerMaster SENTINEL III Keyboard" (type: KEYBOARD, id 10)
[    13.495] (**) Option "xkb_layout" "fr"
[    13.495] (**) Option "xkb_variant" "oss"
[    13.496] (II) event4  - CoolerMaster SENTINEL III Keyboard: is tagged by udev as: Keyboard
[    13.496] (II) event4  - CoolerMaster SENTINEL III Keyboard: device is a keyboard
[    13.497] (II) config/udev: Adding input device CoolerMaster SENTINEL III Consumer Control (/dev/input/event5)
[    13.497] (**) CoolerMaster SENTINEL III Consumer Control: Applying InputClass "evdev keyboard catchall"
[    13.497] (**) CoolerMaster SENTINEL III Consumer Control: Applying InputClass "libinput keyboard catchall"
[    13.497] (**) CoolerMaster SENTINEL III Consumer Control: Applying InputClass "system-keyboard"
[    13.497] (II) Using input driver 'libinput' for 'CoolerMaster SENTINEL III Consumer Control'
[    13.497] (**) CoolerMaster SENTINEL III Consumer Control: always reports core events
[    13.497] (**) Option "Device" "/dev/input/event5"
[    13.497] (**) Option "_source" "server/udev"
[    13.499] (II) event5  - CoolerMaster SENTINEL III Consumer Control: is tagged by udev as: Keyboard
[    13.499] (II) event5  - CoolerMaster SENTINEL III Consumer Control: device is a keyboard
[    13.499] (II) event5  - CoolerMaster SENTINEL III Consumer Control: device removed
[    13.507] (II) libinput: CoolerMaster SENTINEL III Consumer Control: needs a virtual subdevice
[    13.507] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-1/3-1.4/3-1.4.1/3-1.4.1:1.1/0003:2516:0034.0003/input/input5/event5"
[    13.507] (II) XINPUT: Adding extended input device "CoolerMaster SENTINEL III Consumer Control" (type: MOUSE, id 11)
[    13.507] (**) Option "AccelerationScheme" "none"
[    13.507] (**) CoolerMaster SENTINEL III Consumer Control: (accel) selected scheme none/0
[    13.507] (**) CoolerMaster SENTINEL III Consumer Control: (accel) acceleration factor: 2.000
[    13.507] (**) CoolerMaster SENTINEL III Consumer Control: (accel) acceleration threshold: 4
[    13.508] (II) event5  - CoolerMaster SENTINEL III Consumer Control: is tagged by udev as: Keyboard
[    13.508] (II) event5  - CoolerMaster SENTINEL III Consumer Control: device is a keyboard
[    13.509] (II) config/udev: Adding input device KLIM Talk (/dev/input/event6)
[    13.509] (**) KLIM Talk: Applying InputClass "evdev keyboard catchall"
[    13.509] (**) KLIM Talk: Applying InputClass "libinput keyboard catchall"
[    13.509] (**) KLIM Talk: Applying InputClass "system-keyboard"
[    13.509] (II) Using input driver 'libinput' for 'KLIM Talk'
[    13.509] (**) KLIM Talk: always reports core events
[    13.509] (**) Option "Device" "/dev/input/event6"
[    13.509] (**) Option "_source" "server/udev"
[    13.510] (II) event6  - KLIM Talk: is tagged by udev as: Keyboard
[    13.511] (II) event6  - KLIM Talk: device is a keyboard
[    13.511] (II) event6  - KLIM Talk: device removed
[    13.531] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-1/3-1.4/3-1.4.3/3-1.4.3:1.2/0003:0C76:1468.0004/input/input7/event6"
[    13.531] (II) XINPUT: Adding extended input device "KLIM Talk" (type: KEYBOARD, id 12)
[    13.531] (**) Option "xkb_layout" "fr"
[    13.531] (**) Option "xkb_variant" "oss"
[    13.534] (II) event6  - KLIM Talk: is tagged by udev as: Keyboard
[    13.534] (II) event6  - KLIM Talk: device is a keyboard
[    13.536] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event7)
[    13.536] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[    13.536] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "libinput keyboard catchall"
[    13.536] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "system-keyboard"
[    13.536] (II) Using input driver 'libinput' for 'Logitech Logitech Illuminated Keyboard'
[    13.536] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[    13.536] (**) Option "Device" "/dev/input/event7"
[    13.536] (**) Option "_source" "server/udev"
[    13.538] (II) event7  - Logitech Logitech Illuminated Keyboard: is tagged by udev as: Keyboard
[    13.539] (II) event7  - Logitech Logitech Illuminated Keyboard: device is a keyboard
[    13.539] (II) event7  - Logitech Logitech Illuminated Keyboard: device removed
[    13.546] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-1/3-1.4/3-1.4.4/3-1.4.4:1.0/0003:046D:C318.0005/input/input8/event7"
[    13.546] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD, id 13)
[    13.546] (**) Option "xkb_layout" "fr"
[    13.546] (**) Option "xkb_variant" "oss"
[    13.549] (II) event7  - Logitech Logitech Illuminated Keyboard: is tagged by udev as: Keyboard
[    13.549] (II) event7  - Logitech Logitech Illuminated Keyboard: device is a keyboard
[    13.551] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard Consumer Control (/dev/input/event8)
[    13.551] (**) Logitech Logitech Illuminated Keyboard Consumer Control: Applying InputClass "evdev keyboard catchall"
[    13.551] (**) Logitech Logitech Illuminated Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    13.551] (**) Logitech Logitech Illuminated Keyboard Consumer Control: Applying InputClass "system-keyboard"
[    13.551] (II) Using input driver 'libinput' for 'Logitech Logitech Illuminated Keyboard Consumer Control'
[    13.551] (**) Logitech Logitech Illuminated Keyboard Consumer Control: always reports core events
[    13.551] (**) Option "Device" "/dev/input/event8"
[    13.551] (**) Option "_source" "server/udev"
[    13.554] (II) event8  - Logitech Logitech Illuminated Keyboard Consumer Control: is tagged by udev as: Keyboard
[    13.554] (II) event8  - Logitech Logitech Illuminated Keyboard Consumer Control: device is a keyboard
[    13.554] (II) event8  - Logitech Logitech Illuminated Keyboard Consumer Control: device removed
[    13.563] (II) libinput: Logitech Logitech Illuminated Keyboard Consumer Control: needs a virtual subdevice
[    13.563] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-1/3-1.4/3-1.4.4/3-1.4.4:1.1/0003:046D:C318.0006/input/input9/event8"
[    13.563] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard Consumer Control" (type: MOUSE, id 14)
[    13.563] (**) Option "AccelerationScheme" "none"
[    13.563] (**) Logitech Logitech Illuminated Keyboard Consumer Control: (accel) selected scheme none/0
[    13.563] (**) Logitech Logitech Illuminated Keyboard Consumer Control: (accel) acceleration factor: 2.000
[    13.563] (**) Logitech Logitech Illuminated Keyboard Consumer Control: (accel) acceleration threshold: 4
[    13.566] (II) event8  - Logitech Logitech Illuminated Keyboard Consumer Control: is tagged by udev as: Keyboard
[    13.566] (II) event8  - Logitech Logitech Illuminated Keyboard Consumer Control: device is a keyboard
[    13.567] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event16)
[    13.567] (II) No input driver specified, ignoring this device.
[    13.567] (II) This device may have been added with another device file.
[    13.567] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event17)
[    13.567] (II) No input driver specified, ignoring this device.
[    13.567] (II) This device may have been added with another device file.
[    13.568] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event18)
[    13.568] (II) No input driver specified, ignoring this device.
[    13.568] (II) This device may have been added with another device file.
[    13.568] (II) config/udev: Adding input device HD-Audio Generic Line Out Front (/dev/input/event19)
[    13.568] (II) No input driver specified, ignoring this device.
[    13.568] (II) This device may have been added with another device file.
[    13.569] (II) config/udev: Adding input device HD-Audio Generic Line Out Surround (/dev/input/event20)
[    13.569] (II) No input driver specified, ignoring this device.
[    13.569] (II) This device may have been added with another device file.
[    13.569] (II) config/udev: Adding input device HD-Audio Generic Line Out CLFE (/dev/input/event21)
[    13.570] (II) No input driver specified, ignoring this device.
[    13.570] (II) This device may have been added with another device file.
[    13.570] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event22)
[    13.570] (II) No input driver specified, ignoring this device.
[    13.570] (II) This device may have been added with another device file.
[    13.571] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[    13.571] (II) No input driver specified, ignoring this device.
[    13.571] (II) This device may have been added with another device file.
[    13.581] (**) CoolerMaster SENTINEL III Consumer Control: Applying InputClass "evdev keyboard catchall"
[    13.581] (**) CoolerMaster SENTINEL III Consumer Control: Applying InputClass "libinput keyboard catchall"
[    13.581] (**) CoolerMaster SENTINEL III Consumer Control: Applying InputClass "system-keyboard"
[    13.581] (II) Using input driver 'libinput' for 'CoolerMaster SENTINEL III Consumer Control'
[    13.581] (**) CoolerMaster SENTINEL III Consumer Control: always reports core events
[    13.581] (**) Option "Device" "/dev/input/event5"
[    13.581] (**) Option "_source" "_driver/libinput"
[    13.581] (II) libinput: CoolerMaster SENTINEL III Consumer Control: is a virtual subdevice
[    13.581] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-1/3-1.4/3-1.4.1/3-1.4.1:1.1/0003:2516:0034.0003/input/input5/event5"
[    13.581] (II) XINPUT: Adding extended input device "CoolerMaster SENTINEL III Consumer Control" (type: KEYBOARD, id 15)
[    13.581] (**) Option "xkb_layout" "fr"
[    13.581] (**) Option "xkb_variant" "oss"
[    13.581] (**) Logitech Logitech Illuminated Keyboard Consumer Control: Applying InputClass "evdev keyboard catchall"
[    13.582] (**) Logitech Logitech Illuminated Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    13.582] (**) Logitech Logitech Illuminated Keyboard Consumer Control: Applying InputClass "system-keyboard"
[    13.582] (II) Using input driver 'libinput' for 'Logitech Logitech Illuminated Keyboard Consumer Control'
[    13.582] (**) Logitech Logitech Illuminated Keyboard Consumer Control: always reports core events
[    13.582] (**) Option "Device" "/dev/input/event8"
[    13.582] (**) Option "_source" "_driver/libinput"
[    13.582] (II) libinput: Logitech Logitech Illuminated Keyboard Consumer Control: is a virtual subdevice
[    13.582] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-1/3-1.4/3-1.4.4/3-1.4.4:1.1/0003:046D:C318.0006/input/input9/event8"
[    13.582] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard Consumer Control" (type: KEYBOARD, id 16)
[    13.582] (**) Option "xkb_layout" "fr"
[    13.582] (**) Option "xkb_variant" "oss"
[    13.585] (EE) Failed to open authorization file "/var/run/sddm/{4eb635f4-3fda-4cc1-9ca9-aa21504390bf}": No such file or directory
[    15.007] (II) AMDGPU(0): EDID vendor "BNQ", prod id 30948
[    15.007] (II) AMDGPU(0): Using EDID range info for horizontal sync
[    15.007] (II) AMDGPU(0): Using EDID range info for vertical refresh
[    15.007] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    15.007] (II) AMDGPU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    15.007] (II) AMDGPU(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    15.007] (II) AMDGPU(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    15.007] (II) AMDGPU(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    15.007] (II) AMDGPU(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[    15.007] (II) AMDGPU(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    15.007] (II) AMDGPU(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    15.007] (II) AMDGPU(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    15.007] (II) AMDGPU(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[    15.007] (II) AMDGPU(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[    15.007] (II) AMDGPU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    15.007] (II) AMDGPU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    15.007] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    15.007] (II) AMDGPU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    15.007] (II) AMDGPU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    15.007] (II) AMDGPU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    15.007] (II) AMDGPU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    15.007] (II) AMDGPU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    15.007] (II) AMDGPU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    15.007] (II) AMDGPU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    15.007] (II) AMDGPU(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    15.007] (II) AMDGPU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    15.007] (II) AMDGPU(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz e)
[    15.007] (II) AMDGPU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    15.152] (II) AMDGPU(0): EDID vendor "BNQ", prod id 30948
[    15.152] (II) AMDGPU(0): Using hsync ranges from config file
[    15.152] (II) AMDGPU(0): Using vrefresh ranges from config file
[    15.152] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    15.152] (II) AMDGPU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    15.152] (II) AMDGPU(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    15.152] (II) AMDGPU(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    15.152] (II) AMDGPU(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    15.152] (II) AMDGPU(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[    15.152] (II) AMDGPU(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    15.152] (II) AMDGPU(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    15.152] (II) AMDGPU(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    15.152] (II) AMDGPU(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[    15.152] (II) AMDGPU(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[    15.152] (II) AMDGPU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    15.152] (II) AMDGPU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    15.152] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    15.152] (II) AMDGPU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    15.152] (II) AMDGPU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    15.152] (II) AMDGPU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    15.152] (II) AMDGPU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    15.152] (II) AMDGPU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    15.152] (II) AMDGPU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    15.152] (II) AMDGPU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    15.152] (II) AMDGPU(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    15.152] (II) AMDGPU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    15.152] (II) AMDGPU(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz e)
[    15.152] (II) AMDGPU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    15.523] (II) AMDGPU(0): EDID vendor "BNQ", prod id 30948
[    15.523] (II) AMDGPU(0): Using hsync ranges from config file
[    15.523] (II) AMDGPU(0): Using vrefresh ranges from config file
[    15.523] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    15.523] (II) AMDGPU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    15.523] (II) AMDGPU(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    15.523] (II) AMDGPU(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    15.523] (II) AMDGPU(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    15.523] (II) AMDGPU(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[    15.523] (II) AMDGPU(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    15.523] (II) AMDGPU(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    15.524] (II) AMDGPU(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    15.524] (II) AMDGPU(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[    15.524] (II) AMDGPU(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[    15.524] (II) AMDGPU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    15.524] (II) AMDGPU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    15.524] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    15.524] (II) AMDGPU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    15.524] (II) AMDGPU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    15.524] (II) AMDGPU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    15.524] (II) AMDGPU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    15.524] (II) AMDGPU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    15.524] (II) AMDGPU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    15.524] (II) AMDGPU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    15.524] (II) AMDGPU(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    15.524] (II) AMDGPU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    15.524] (II) AMDGPU(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz e)
[    15.524] (II) AMDGPU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)

Au reboot (comme demandé dans dmesg), tout revient à la normale.
Enfin, là il m'a fait un nouveau type de freeze pendant que j'écrivais ce post, rien que pour me faire mentir: tout bloqué, sauf le pointeur de la souris que je pouvais déplacer fluidement, mais plus de clavier (même les témoins de verrouillage ne changeaient pas d'état), plus de SSH, etc... Bref, reset sauvage via le bouton reset du boîtier (le bouton power étant actuellement configuré pour éteindre les écrans).
Et ça me recoupe dans ma prose: le PC a reboot brutalement ! Il a décidé de me péter les noix aujourd'hui !


Sinon, autre chose: j'ai testé Manjaro KDE en Live (ISO normal et minimal téléchargés hier midi), j'ai tenté les deux ISO, en bootant dans les deux modes proposés ("drivers open source" ou "drivers proprios"), même résultat que les autres distros: le triple-screen merdoie tout pareil.


PC Fixe: AMD Ryzen 5 3600X | AsRock B550 Phantom Gaming 4 | Kingston HyperX Predator DDR4 2x 8Go @ 2666MHz | Sapphire Radeon RX580 Nitro+ 4Go GDDR5 | PNY CS3030 500Go NVMe
PC portables: Asus TUF-505DV (AL062T) | Lenovo Thinkpad E520 (11433MG) | Asus eeePC 1005PE
Serveur (ex-fixe): Intel i5-2550K | Gigabyte GA-Z68X-UD3H-B3 | Corsair Vengeance DDR3 2x 4Go @ 1600MHz | Sapphire Radeon R5 230 2Go GDDR3 | Hitachi 7K750 500Go @ 7200rpm

Hors ligne

#27 22/01/2021 13:44:42

Vorahk
Membre
Lieu : Près de Chartres
Inscription : 16/01/2019
Messages : 166

Re : Triple-screen, Radeon RX580: config à moitié KO au réveil des écrans

Depuis la dernière fois j'ai changé la carte mère et le CPU, comme j'avais dit, mais par manque de temps j'ai pas trop cherché pour ce problème de triple-screen...

J'ai tout de même installé Manjaro KDE, puis une nouvelle Fedora 33 KDE à côté de l'ancienne Fedora 33 (qui était initialement une Fedora 32 lors de l'install quand j'ai installé mon NVMe).

Alors mon ancienne Fedora a très bien supporté le changement de matos, mais comme pour les deux install fraîches à côté, toujours ce problème...

Mais aujourd'hui, sur la F33 neuve, j'ai fait un dnf upgrade --refresh ce matin, j'ai redémarré pour appliquer le nouveau kernel, puis je me suis servi du PC normalement, avant de le laisser seul. A mon retour sur le PC, je bouge la souris pour réveiller les écrans, je me retrouve avec les trois écrans 1920×1080 comme un seul de 5760×1080 une seconde avant que ça revienne en trois écrans de 1920×1080 (comportement pas systématique, mais relativement courant). Et miracle: les trois écrans ont gardé leur congif respective (plasmoïds, wallpaper, etc...) ! Première fois que ça arrive sur ce PC ! big_smile

Je poste les infos sur les paquets mis à jour:

[root@Vorahk-PC ~]# dnf history info last
Identifiant de transaction : 14
Temps de début    : ven. 22 janv. 2021 09:53:58
Début de RPMDB    : 2180:b135375a906934f8ec98fbdfe480044d5a5f60a6
Temps de fin : ven. 22 janv. 2021 09:54:35 (37 secondes)
Fin de RPMDB : 2181:848d9a827eb2ac2d7ad4b225cf27a16bd2ed2817
Utilisateur  : Vorahk <vorahk>
Code de retour  : Réussi
Releasever     : 33
Ligne de commande : upgrade --refresh
Commentaire : 
Paquets modifiés :
    Installer kernel-5.10.8-200.fc33.x86_64                   @updates
    Installer kernel-core-5.10.8-200.fc33.x86_64              @updates
    Installer kernel-modules-5.10.8-200.fc33.x86_64           @updates
    Installer kernel-modules-extra-5.10.8-200.fc33.x86_64     @updates
    Installer sudo-python-plugin-1.9.5p1-1.fc33.x86_64        @updates
    Upgrade   ModemManager-1.14.10-1.fc33.x86_64              @updates
    Upgraded  ModemManager-1.14.8-1.fc33.x86_64               @@System
    Upgrade   ModemManager-glib-1.14.10-1.fc33.x86_64         @updates
    Upgraded  ModemManager-glib-1.14.8-1.fc33.x86_64          @@System
    Upgrade   baloo-widgets-20.12.1-1.fc33.x86_64             @updates
    Upgraded  baloo-widgets-20.08.3-1.fc33.x86_64             @@System
    Upgrade   binutils-2.35-18.fc33.x86_64                    @updates
    Upgraded  binutils-2.35-15.fc33.x86_64                    @@System
    Upgrade   binutils-gold-2.35-18.fc33.x86_64               @updates
    Upgraded  binutils-gold-2.35-15.fc33.x86_64               @@System
    Upgrade   btrfs-progs-5.10-1.fc33.x86_64                  @updates
    Upgraded  btrfs-progs-5.9-1.fc33.x86_64                   @@System
    Upgrade   dbus-broker-26-1.fc33.x86_64                    @updates
    Upgraded  dbus-broker-24-1.fc33.x86_64                    @@System
    Upgrade   dnsmasq-2.83-1.fc33.x86_64                      @updates
    Upgraded  dnsmasq-2.82-3.fc33.x86_64                      @@System
    Upgrade   dolphin-20.12.1-2.fc33.x86_64                   @updates
    Upgraded  dolphin-20.08.3-1.fc33.x86_64                   @@System
    Upgrade   dolphin-libs-20.12.1-2.fc33.x86_64              @updates
    Upgraded  dolphin-libs-20.08.3-1.fc33.x86_64              @@System
    Upgrade   gcr-3.38.1-1.fc33.x86_64                        @updates
    Upgraded  gcr-3.38.0-2.fc33.x86_64                        @@System
    Upgrade   gcr-base-3.38.1-1.fc33.x86_64                   @updates
    Upgraded  gcr-base-3.38.0-2.fc33.x86_64                   @@System
    Upgrade   gdisk-1.0.6-1.fc33.x86_64                       @updates
    Upgraded  gdisk-1.0.5-2.fc33.x86_64                       @@System
    Upgrade   glibc-2.32-3.fc33.i686                          @updates
    Upgraded  glibc-2.32-2.fc33.i686                          @@System
    Upgrade   glibc-2.32-3.fc33.x86_64                        @updates
    Upgraded  glibc-2.32-2.fc33.x86_64                        @@System
    Upgrade   glibc-all-langpacks-2.32-3.fc33.x86_64          @updates
    Upgraded  glibc-all-langpacks-2.32-2.fc33.x86_64          @@System
    Upgrade   glibc-common-2.32-3.fc33.x86_64                 @updates
    Upgraded  glibc-common-2.32-2.fc33.x86_64                 @@System
    Upgrade   glibc-devel-2.32-3.fc33.x86_64                  @updates
    Upgraded  glibc-devel-2.32-2.fc33.x86_64                  @@System
    Upgrade   glibc-headers-x86-2.32-3.fc33.noarch            @updates
    Upgraded  glibc-headers-x86-2.32-2.fc33.noarch            @@System
    Upgrade   glibc-langpack-en-2.32-3.fc33.x86_64            @updates
    Upgraded  glibc-langpack-en-2.32-2.fc33.x86_64            @@System
    Upgrade   glibmm24-2.64.5-3.fc33.x86_64                   @updates
    Upgraded  glibmm24-2.64.5-2.fc33.x86_64                   @@System
    Upgrade   gnome-desktop3-3.38.3-1.fc33.x86_64             @updates
    Upgraded  gnome-desktop3-3.38.2-1.fc33.x86_64             @@System
    Upgrade   gutenprint-5.3.4-1.fc33.x86_64                  @updates
    Upgraded  gutenprint-5.3.3-7.fc33.x86_64                  @@System
    Upgrade   gutenprint-cups-5.3.4-1.fc33.x86_64             @updates
    Upgraded  gutenprint-cups-5.3.3-7.fc33.x86_64             @@System
    Upgrade   gutenprint-libs-5.3.4-1.fc33.x86_64             @updates
    Upgraded  gutenprint-libs-5.3.3-7.fc33.x86_64             @@System
    Upgrade   kdialog-20.12.1-1.fc33.x86_64                   @updates
    Upgraded  kdialog-20.08.3-1.fc33.x86_64                   @@System
    Upgrade   keditbookmarks-20.12.1-1.fc33.x86_64            @updates
    Upgraded  keditbookmarks-20.08.3-1.fc33.x86_64            @@System
    Upgrade   keditbookmarks-libs-20.12.1-1.fc33.x86_64       @updates
    Upgraded  keditbookmarks-libs-20.08.3-1.fc33.x86_64       @@System
    Upgrade   kfind-20.12.1-1.fc33.x86_64                     @updates
    Upgraded  kfind-20.08.3-1.fc33.x86_64                     @@System
    Upgrade   khelpcenter-1:20.12.1-1.fc33.x86_64             @updates
    Upgraded  khelpcenter-1:20.08.3-1.fc33.x86_64             @@System
    Upgrade   konsole5-20.12.1-1.fc33.x86_64                  @updates
    Upgraded  konsole5-20.08.3-1.fc33.x86_64                  @@System
    Upgrade   konsole5-part-20.12.1-1.fc33.x86_64             @updates
    Upgraded  konsole5-part-20.08.3-1.fc33.x86_64             @@System
    Upgrade   kwrite-20.12.1-1.fc33.x86_64                    @updates
    Upgraded  kwrite-20.08.3-1.fc33.x86_64                    @@System
    Upgrade   libibverbs-33.0-1.fc33.i686                     @updates
    Upgraded  libibverbs-32.0-1.fc33.i686                     @@System
    Upgrade   libibverbs-33.0-1.fc33.x86_64                   @updates
    Upgraded  libibverbs-32.0-1.fc33.x86_64                   @@System
    Upgrade   libical-3.0.9-1.fc33.x86_64                     @updates
    Upgraded  libical-3.0.8-5.fc33.x86_64                     @@System
    Upgrade   libmodulemd-2.12.0-1.fc33.x86_64                @updates
    Upgraded  libmodulemd-2.11.2-2.fc33.x86_64                @@System
    Upgrade   libodfgen-0.1.8-1.fc33.x86_64                   @updates
    Upgraded  libodfgen-0.1.7-9.fc33.x86_64                   @@System
    Upgrade   libqmi-1.26.8-1.fc33.x86_64                     @updates
    Upgraded  libqmi-1.26.6-1.fc33.x86_64                     @@System
    Upgrade   libqmi-utils-1.26.8-1.fc33.x86_64               @updates
    Upgraded  libqmi-utils-1.26.6-1.fc33.x86_64               @@System
    Upgrade   libsmbios-2.4.3-1.fc33.x86_64                   @updates
    Upgraded  libsmbios-2.4.2-10.fc33.x86_64                  @@System
    Upgrade   open-vm-tools-11.2.5-1.fc33.x86_64              @updates
    Upgraded  open-vm-tools-11.2.0-1.fc33.x86_64              @@System
    Upgrade   open-vm-tools-desktop-11.2.5-1.fc33.x86_64      @updates
    Upgraded  open-vm-tools-desktop-11.2.0-1.fc33.x86_64      @@System
    Upgrade   raptor2-2.0.15-27.fc33.x86_64                   @updates
    Upgraded  raptor2-2.0.15-26.fc33.x86_64                   @@System
    Upgrade   smartmontools-1:7.2-1.fc33.x86_64               @updates
    Upgraded  smartmontools-1:7.1-9.fc33.x86_64               @@System
    Upgrade   socat-1.7.4.1-1.fc33.x86_64                     @updates
    Upgraded  socat-1.7.3.4-3.fc33.x86_64                     @@System
    Upgrade   sudo-1.9.5p1-1.fc33.x86_64                      @updates
    Upgraded  sudo-1.9.2-1.fc33.x86_64                        @@System
    Upgrade   system-config-printer-libs-1.5.15-1.fc33.noarch @updates
    Upgraded  system-config-printer-libs-1.5.13-3.fc33.noarch @@System
    Upgrade   system-config-printer-udev-1.5.15-1.fc33.x86_64 @updates
    Upgraded  system-config-printer-udev-1.5.13-3.fc33.x86_64 @@System
    Upgrade   wavpack-5.4.0-1.fc33.i686                       @updates
    Upgraded  wavpack-5.3.0-2.fc33.i686                       @@System
    Upgrade   wavpack-5.4.0-1.fc33.x86_64                     @updates
    Upgraded  wavpack-5.3.0-2.fc33.x86_64                     @@System
    Removed   kernel-5.8.15-301.fc33.x86_64                   @@System
    Removed   kernel-core-5.8.15-301.fc33.x86_64              @@System
    Removed   kernel-modules-5.8.15-301.fc33.x86_64           @@System
    Removed   kernel-modules-extra-5.8.15-301.fc33.x86_64     @@System
Sortie du mini script :
   1 Warning: The unit file, source configuration file or drop-ins of vmtoolsd.service changed on disk. Run 'systemctl daemon-reload' to reload units.
   2 Warning: The unit file, source configuration file or drop-ins of vgauthd.service changed on disk. Run 'systemctl daemon-reload' to reload units.
   3 Warning: The unit file, source configuration file or drop-ins of smartd.service changed on disk. Run 'systemctl daemon-reload' to reload units.
   4 sort: fflush failed: 'standard output': Broken pipe
   5 sort: write error
   6 
   7 gzip: stdout: Broken pipe
   8 
   9 gzip: stdout: Broken pipe
  10 sort: write failed: 'standard output': Broken pipe
  11 sort: write error

Je ne marque pas en résolu pour l'instant, j'attend un peu de voir, mais déjà c'est une grande avancée !


PC Fixe: AMD Ryzen 5 3600X | AsRock B550 Phantom Gaming 4 | Kingston HyperX Predator DDR4 2x 8Go @ 2666MHz | Sapphire Radeon RX580 Nitro+ 4Go GDDR5 | PNY CS3030 500Go NVMe
PC portables: Asus TUF-505DV (AL062T) | Lenovo Thinkpad E520 (11433MG) | Asus eeePC 1005PE
Serveur (ex-fixe): Intel i5-2550K | Gigabyte GA-Z68X-UD3H-B3 | Corsair Vengeance DDR3 2x 4Go @ 1600MHz | Sapphire Radeon R5 230 2Go GDDR3 | Hitachi 7K750 500Go @ 7200rpm

Hors ligne

#28 22/01/2021 14:48:12

nouvo09
Accro à Fedo !
Lieu : Paris
Inscription : 22/09/2005
Messages : 23 286

Re : Triple-screen, Radeon RX580: config à moitié KO au réveil des écrans

Tu te souviens la réplique fameuse dans le film Rabbi Jacob ?   "C'est un miracle" !


C'est pas parce que c'est difficile qu'on n'ose pas,
c'est parce qu'on ose pas que c'est difficile !

Hors ligne

#29 16/09/2021 11:46:25

Vorahk
Membre
Lieu : Près de Chartres
Inscription : 16/01/2019
Messages : 166

Re : Triple-screen, Radeon RX580: config à moitié KO au réveil des écrans

Ça fait longtemps que j'avais plus cherché de solution pour mon problème, mais je m'y suis remis après avoir pensé aux systèmes DDC & DDC/CI qui gèrent les échanges entre le PC et ses écrans. Et j'ai peut-être trouvé quelque chose: en utilisant le paramètre kernel "amdgpu.dc=0", ça pourrait corriger des problèmes avec le DDC et les GPU Radeon utilisant le pilote libre amdgpu.
Ce paramètre désactive un élément lié au pilote amdgpu et au kernel: le Display Core.

J'ai testé vite fait hier soir: démarrage en éditant l'entrée GRUB à la volée, et mise en veille des écrans. Au réveil, rien ne bouge, tout fonctionne comme ça devrait !

Du coup, j'ai ajouté ce paramètre dans /etc/default/grub, pour pouvoir tester sur le long terme. J'ai aussi remis la veille des écrans à 10 min, j'avais augmenté à 30 min pour ne pas avoir à lancer mon script et remettre les différentes fenêtres à leur place à chaque fois que je lâchais mon PC.


Par contre, je ne suis plus sur Fedora, j'ai migré sur Manjaro depuis quelques mois, attiré par le côté rolling-release et la meilleure gestion du matériel, sans compter un système plus léger (et toujours avec KDE). Mais j'avais le même problème avec mon triple-screen, donc je suppose que ma solution de contournement devrait être aussi fonctionnelle sur Fedora, et probablement d'autres distros.

En cherchant sur internet "DDC" et "amdgpu", on remarque qu'il y a pas mal de problèmes lié à l'utilisation du pilote amdgpu avec le DDC, qui changent ou ne se posent pas quand on met à 0 amdgpu.dc. Il y a des problèmes de veille d'écrans, d'EDID, de son via HDMI, etc...
Côté versions du kernel et du pilote amdgpu, ça semble ne rien changer ou presque.


Cette fois je pense que c'est enfin bon, en espérant ne pas avoir d'effet de bord avec la désactivation du Display Core.


PC Fixe: AMD Ryzen 5 3600X | AsRock B550 Phantom Gaming 4 | Kingston HyperX Predator DDR4 2x 8Go @ 2666MHz | Sapphire Radeon RX580 Nitro+ 4Go GDDR5 | PNY CS3030 500Go NVMe
PC portables: Asus TUF-505DV (AL062T) | Lenovo Thinkpad E520 (11433MG) | Asus eeePC 1005PE
Serveur (ex-fixe): Intel i5-2550K | Gigabyte GA-Z68X-UD3H-B3 | Corsair Vengeance DDR3 2x 4Go @ 1600MHz | Sapphire Radeon R5 230 2Go GDDR3 | Hitachi 7K750 500Go @ 7200rpm

Hors ligne

#30 16/09/2021 13:57:34

VINDICATORs
RédactWikix and the graphicatorix!
Modérateur
Lieu : Toulouse(31) France
Inscription : 23/11/2004
Messages : 18 508
Site Web

Re : Triple-screen, Radeon RX580: config à moitié KO au réveil des écrans

Il y a eu aussi pas mal de mises à jours coté KDE/Plasma qui font que cela semble moins problématique.

les soucis d'EDID/DDC dépendent sans doute fortement des écrans qui ont parfois des valeurs bizarre.
Les joies de déléguer cela ailleurs que dans le système...


AMD R7 5800x, MSI Pro Carbon X470, 32Go DDR4 3200@3400Mhz Gskill TridentZ CL14, RX 5700XT MSI WCooling OC SSD: 1x970 EVO 500Go + 1xPNY LXR8 NVME 1To + 2x500Go 860 EVO, 3x1To 860Evo, HDD 1x2To WDblack, 1x4to WDBlack, 1x3To WDRed, Purepower 1000W plat - BeQuiet Dark 900
AMD R5 2600, Asus A320, 24Go DDR4 2133Mhz, 1x250GO SSD, 3x 2To RAID5 WDBlue Cubes Chieftec/ AMD R7 2700x + 16Go DDR4 2933Mhz+1to NVME Sandisk XLR8, 2x1To QVO CMaster MasterBox Q300L
AMD A6 9500, 8Go, 250Go SSD

Hors ligne

#31 17/09/2021 15:32:46

Vorahk
Membre
Lieu : Près de Chartres
Inscription : 16/01/2019
Messages : 166

Re : Triple-screen, Radeon RX580: config à moitié KO au réveil des écrans

Oui, je viens d'avoir une nouvelle version de Plasma ce matin sur Manjaro (5.22.2 de mémoire), je n'ai pas retesté sans amggpu.dc=0.

C'est ce que j'ai vu, les écrans et les adaptateurs peuvent être plus ou moins bien foutu côté DDC, pour certains ça semble corriger leur(s) problème(s) en désactivant simplement le DDC/CI côté écran. J'avais fait ce test, mais ça change rien pour moi.

De mémoire, mes écrans sont des Benq GW2470HL, j'ai lancé "ddcutil detect" et "ddcutil capabilites --bus=x" (où x est le numéro de périphérique correspondant à chacun de mes trois écrans dans /dev/i2c-x, donné par "ddcutil detect" une fois le module i2c-dev chargé) et j'ai les bonnes infos. Je les posterai quand je serai devant mon PC. Mais si tout semble OK de ce côté, c'est peut-être quand même d'eux que ça vient: j'avais jamais eu de problème quand j'étais en dual-screen dissymétrique de marque, de dimension et de résolution différentes. Et j'avais déjà mon GPU actuel, la RX580. J'avais fait des tests en branchant trois écrans différents, dont un des Benq, et de mémoire, je n'avais plus de problème non plus.

Toujours est-il que ce matin, les écrans ont été mis en vielle plusieurs fois, et à chaque fois, aucun problème au réveil, et en plus ça se faisait plus rapidement, donc je vais laisser le paramètre amdgpu.dc=0 en place pour le moment, mais je vais me rencarder sur la raison d'être de ce Display Core.


Edit:

ddcutil detect

Display 1
   I2C bus:  /dev/i2c-4
   EDID synopsis:
      Mfg id:               BNQ
      Model:                BenQ GW2470
      Product code:         30948
      Serial number:        R4K01992SL0
      Binary serial number: 21573 (0x00005445)
      Manufacture year:     2019,  Week: 16
   VCP version:         2.2

Display 2
   I2C bus:  /dev/i2c-6
   EDID synopsis:
      Mfg id:               BNQ
      Model:                BenQ GW2470
      Product code:         30948
      Serial number:        R4K02034SL0
      Binary serial number: 21573 (0x00005445)
      Manufacture year:     2019,  Week: 16
   VCP version:         2.2

Display 3
   I2C bus:  /dev/i2c-8
   EDID synopsis:
      Mfg id:               BNQ
      Model:                BenQ GW2470
      Product code:         30948
      Serial number:        R4K01989SL0
      Binary serial number: 21573 (0x00005445)
      Manufacture year:     2019,  Week: 16
   VCP version:         2.2

ddcutil capabillities --bus=4

Model: GW2470HL
MCCS version: 2.2
Commands:
   Op Code: 01 (VCP Request)
   Op Code: 02 (VCP Response)
   Op Code: 03 (VCP Set)
   Op Code: 07 (Timing Request)
   Op Code: 0C (Save Settings)
   Op Code: E3 (Capabilities Reply)
   Op Code: F3 (Capabilities Request)
VCP Features:
   Feature: 02 (New control value)
   Feature: 04 (Restore factory defaults)
   Feature: 05 (Restore factory brightness/contrast defaults)
   Feature: 08 (Restore color defaults)
   Feature: 0B (Color temperature increment)
   Feature: 0C (Color temperature request)
   Feature: 10 (Brightness)
   Feature: 12 (Contrast)
   Feature: 14 (Select color preset)
      Values:
         04: 5000 K
         05: 6500 K
         08: 9300 K
         0b: User 1
   Feature: 16 (Video gain: Red)
   Feature: 18 (Video gain: Green)
   Feature: 1A (Video gain: Blue)
   Feature: 52 (Active control)
   Feature: 60 (Input Source)
      Values:
         01: VGA-1
         11: HDMI-1
         12: HDMI-2
   Feature: 62 (Audio speaker volume)
   Feature: 72 (Gamma)
      Invalid gamma descriptor: 50 64 78 8c a0
   Feature: 86 (Display Scaling)
      Values:
         02: Max image, no aspect ration distortion
         05: Max vertical image with aspect ratio distortion
   Feature: 87 (Sharpness)
   Feature: 8A (Color Saturation)
   Feature: 8D (Audio mute/Screen blank)
      Values: 01 02 (interpretation unavailable)
   Feature: 90 (Hue)
   Feature: AA (Screen Orientation)
      Values:
         01: 0 degrees
         02: 90 degrees
         ff: Display cannot supply orientation
   Feature: AC (Horizontal frequency)
   Feature: AE (Vertical frequency)
   Feature: B2 (Flat panel sub-pixel layout)
   Feature: B5 (Unrecognized feature)
      Values: 00 01 (interpretation unavailable)
   Feature: B6 (Display technology type)
   Feature: C0 (Display usage time)
   Feature: C6 (Application enable key)
   Feature: C8 (Display controller type)
   Feature: C9 (Display firmware level)
   Feature: CA (OSD/Button Control)
      Values:
         01: OSD disabled, button events enabled
         02: OSD enabled, button events enabled
   Feature: CC (OSD Language)
      Values:
         01: Chinese (traditional, Hantai)
         02: English
         03: French
         04: German
         05: Italian
         06: Japanese
         07: Korean
         09: Russian
         0a: Spanish
         0b: Swedish
         0d: Chinese (simplified / Kantai)
         0e: Portuguese (Brazil)
         0f: Arabic
         12: Czech
         14: Dutch
         1a: Hungarian
         1e: Polish
         1f: Romanian 
   Feature: DA (Scan mode)
      Values:
         00: Normal operation
         02: Overscan
   Feature: D6 (Power mode)
      Values:
         01: DPM: On,  DPMS: Off
         05: Write only value to turn off display
   Feature: DC (Display Mode)
      Values:
         00: Standard/Default mode
         03: Movie
         05: Games
         0b: Unrecognized value
         0c: Unrecognized value
         0e: Unrecognized value
         12: Unrecognized value
         13: Unrecognized value
   Feature: DF (VCP Version)
   Feature: EA (Manufacturer specific feature)
      Values: 00 01 02 03 04 05 (interpretation unavailable)
   Feature: EE (Manufacturer specific feature)
      Values: 00 01 (interpretation unavailable)
   Feature: EF (Manufacturer specific feature)
      Values: 00 01 (interpretation unavailable)
   Feature: F0 (Manufacturer specific feature)
      Values: 00 01 02 (interpretation unavailable)
   Feature: F1 (Manufacturer specific feature)
      Values: 00 01 (interpretation unavailable)
   Feature: F2 (Manufacturer specific feature)
      Values: 14 28 3C 50 64 (interpretation unavailable)
   Feature: F4 (Manufacturer specific feature)
      Values: 00 01 (interpretation unavailable)
   Feature: F5 (Manufacturer specific feature)
      Values: 00 01 (interpretation unavailable)
   Feature: F7 (Manufacturer specific feature)
      Values: 00 01 (interpretation unavailable)
   Feature: F8 (Manufacturer specific feature)
      Values: 00 0A 14 1E (interpretation unavailable)
   Feature: FC (Manufacturer specific feature)
      Values: 00 01 (interpretation unavailable)

ddcutil capabilities --bus=6

Model: GW2470HL
MCCS version: 2.2
Commands:
   Op Code: 01 (VCP Request)
   Op Code: 02 (VCP Response)
   Op Code: 03 (VCP Set)
   Op Code: 07 (Timing Request)
   Op Code: 0C (Save Settings)
   Op Code: E3 (Capabilities Reply)
   Op Code: F3 (Capabilities Request)
VCP Features:
   Feature: 02 (New control value)
   Feature: 04 (Restore factory defaults)
   Feature: 05 (Restore factory brightness/contrast defaults)
   Feature: 08 (Restore color defaults)
   Feature: 0B (Color temperature increment)
   Feature: 0C (Color temperature request)
   Feature: 10 (Brightness)
   Feature: 12 (Contrast)
   Feature: 14 (Select color preset)
      Values:
         04: 5000 K
         05: 6500 K
         08: 9300 K
         0b: User 1
   Feature: 16 (Video gain: Red)
   Feature: 18 (Video gain: Green)
   Feature: 1A (Video gain: Blue)
   Feature: 52 (Active control)
   Feature: 60 (Input Source)
      Values:
         01: VGA-1
         11: HDMI-1
         12: HDMI-2
   Feature: 62 (Audio speaker volume)
   Feature: 72 (Gamma)
      Invalid gamma descriptor: 50 64 78 8c a0
   Feature: 86 (Display Scaling)
      Values:
         02: Max image, no aspect ration distortion
         05: Max vertical image with aspect ratio distortion
   Feature: 87 (Sharpness)
   Feature: 8A (Color Saturation)
   Feature: 8D (Audio mute/Screen blank)
      Values: 01 02 (interpretation unavailable)
   Feature: 90 (Hue)
   Feature: AA (Screen Orientation)
      Values:
         01: 0 degrees
         02: 90 degrees
         ff: Display cannot supply orientation
   Feature: AC (Horizontal frequency)
   Feature: AE (Vertical frequency)
   Feature: B2 (Flat panel sub-pixel layout)
   Feature: B5 (Unrecognized feature)
      Values: 00 01 (interpretation unavailable)
   Feature: B6 (Display technology type)
   Feature: C0 (Display usage time)
   Feature: C6 (Application enable key)
   Feature: C8 (Display controller type)
   Feature: C9 (Display firmware level)
   Feature: CA (OSD/Button Control)
      Values:
         01: OSD disabled, button events enabled
         02: OSD enabled, button events enabled
   Feature: CC (OSD Language)
      Values:
         01: Chinese (traditional, Hantai)
         02: English
         03: French
         04: German
         05: Italian
         06: Japanese
         07: Korean
         09: Russian
         0a: Spanish
         0b: Swedish
         0d: Chinese (simplified / Kantai)
         0e: Portuguese (Brazil)
         0f: Arabic
         12: Czech
         14: Dutch
         1a: Hungarian
         1e: Polish
         1f: Romanian 
   Feature: DA (Scan mode)
      Values:
         00: Normal operation
         02: Overscan
   Feature: D6 (Power mode)
      Values:
         01: DPM: On,  DPMS: Off
         05: Write only value to turn off display
   Feature: DC (Display Mode)
      Values:
         00: Standard/Default mode
         03: Movie
         05: Games
         0b: Unrecognized value
         0c: Unrecognized value
         0e: Unrecognized value
         12: Unrecognized value
         13: Unrecognized value
   Feature: DF (VCP Version)
   Feature: EA (Manufacturer specific feature)
      Values: 00 01 02 03 04 05 (interpretation unavailable)
   Feature: EE (Manufacturer specific feature)
      Values: 00 01 (interpretation unavailable)
   Feature: EF (Manufacturer specific feature)
      Values: 00 01 (interpretation unavailable)
   Feature: F0 (Manufacturer specific feature)
      Values: 00 01 02 (interpretation unavailable)
   Feature: F1 (Manufacturer specific feature)
      Values: 00 01 (interpretation unavailable)
   Feature: F2 (Manufacturer specific feature)
      Values: 14 28 3C 50 64 (interpretation unavailable)
   Feature: F4 (Manufacturer specific feature)
      Values: 00 01 (interpretation unavailable)
   Feature: F5 (Manufacturer specific feature)
      Values: 00 01 (interpretation unavailable)
   Feature: F7 (Manufacturer specific feature)
      Values: 00 01 (interpretation unavailable)
   Feature: F8 (Manufacturer specific feature)
      Values: 00 0A 14 1E (interpretation unavailable)
   Feature: FC (Manufacturer specific feature)
      Values: 00 01 (interpretation unavailable)

ddcutil capabilities --bus=8

Model: GW2470HL
MCCS version: 2.2
Commands:
   Op Code: 01 (VCP Request)
   Op Code: 02 (VCP Response)
   Op Code: 03 (VCP Set)
   Op Code: 07 (Timing Request)
   Op Code: 0C (Save Settings)
   Op Code: E3 (Capabilities Reply)
   Op Code: F3 (Capabilities Request)
VCP Features:
   Feature: 02 (New control value)
   Feature: 04 (Restore factory defaults)
   Feature: 05 (Restore factory brightness/contrast defaults)
   Feature: 08 (Restore color defaults)
   Feature: 0B (Color temperature increment)
   Feature: 0C (Color temperature request)
   Feature: 10 (Brightness)
   Feature: 12 (Contrast)
   Feature: 14 (Select color preset)
      Values:
         04: 5000 K
         05: 6500 K
         08: 9300 K
         0b: User 1
   Feature: 16 (Video gain: Red)
   Feature: 18 (Video gain: Green)
   Feature: 1A (Video gain: Blue)
   Feature: 52 (Active control)
   Feature: 60 (Input Source)
      Values:
         01: VGA-1
         11: HDMI-1
         12: HDMI-2
   Feature: 62 (Audio speaker volume)
   Feature: 72 (Gamma)
      Invalid gamma descriptor: 50 64 78 8c a0
   Feature: 86 (Display Scaling)
      Values:
         02: Max image, no aspect ration distortion
         05: Max vertical image with aspect ratio distortion
   Feature: 87 (Sharpness)
   Feature: 8A (Color Saturation)
   Feature: 8D (Audio mute/Screen blank)
      Values: 01 02 (interpretation unavailable)
   Feature: 90 (Hue)
   Feature: AA (Screen Orientation)
      Values:
         01: 0 degrees
         02: 90 degrees
         ff: Display cannot supply orientation
   Feature: AC (Horizontal frequency)
   Feature: AE (Vertical frequency)
   Feature: B2 (Flat panel sub-pixel layout)
   Feature: B5 (Unrecognized feature)
      Values: 00 01 (interpretation unavailable)
   Feature: B6 (Display technology type)
   Feature: C0 (Display usage time)
   Feature: C6 (Application enable key)
   Feature: C8 (Display controller type)
   Feature: C9 (Display firmware level)
   Feature: CA (OSD/Button Control)
      Values:
         01: OSD disabled, button events enabled
         02: OSD enabled, button events enabled
   Feature: CC (OSD Language)
      Values:
         01: Chinese (traditional, Hantai)
         02: English
         03: French
         04: German
         05: Italian
         06: Japanese
         07: Korean
         09: Russian
         0a: Spanish
         0b: Swedish
         0d: Chinese (simplified / Kantai)
         0e: Portuguese (Brazil)
         0f: Arabic
         12: Czech
         14: Dutch
         1a: Hungarian
         1e: Polish
         1f: Romanian 
   Feature: DA (Scan mode)
      Values:
         00: Normal operation
         02: Overscan
   Feature: D6 (Power mode)
      Values:
         01: DPM: On,  DPMS: Off
         05: Write only value to turn off display
   Feature: DC (Display Mode)
      Values:
         00: Standard/Default mode
         03: Movie
         05: Games
         0b: Unrecognized value
         0c: Unrecognized value
         0e: Unrecognized value
         12: Unrecognized value
         13: Unrecognized value
   Feature: DF (VCP Version)
   Feature: EA (Manufacturer specific feature)
      Values: 00 01 02 03 04 05 (interpretation unavailable)
   Feature: EE (Manufacturer specific feature)
      Values: 00 01 (interpretation unavailable)
   Feature: EF (Manufacturer specific feature)
      Values: 00 01 (interpretation unavailable)
   Feature: F0 (Manufacturer specific feature)
      Values: 00 01 02 (interpretation unavailable)
   Feature: F1 (Manufacturer specific feature)
      Values: 00 01 (interpretation unavailable)
   Feature: F2 (Manufacturer specific feature)
      Values: 14 28 3C 50 64 (interpretation unavailable)
   Feature: F4 (Manufacturer specific feature)
      Values: 00 01 (interpretation unavailable)
   Feature: F5 (Manufacturer specific feature)
      Values: 00 01 (interpretation unavailable)
   Feature: F7 (Manufacturer specific feature)
      Values: 00 01 (interpretation unavailable)
   Feature: F8 (Manufacturer specific feature)
      Values: 00 0A 14 1E (interpretation unavailable)
   Feature: FC (Manufacturer specific feature)
      Values: 00 01 (interpretation unavailable)

Dernière modification par Vorahk (17/09/2021 21:10:23)


PC Fixe: AMD Ryzen 5 3600X | AsRock B550 Phantom Gaming 4 | Kingston HyperX Predator DDR4 2x 8Go @ 2666MHz | Sapphire Radeon RX580 Nitro+ 4Go GDDR5 | PNY CS3030 500Go NVMe
PC portables: Asus TUF-505DV (AL062T) | Lenovo Thinkpad E520 (11433MG) | Asus eeePC 1005PE
Serveur (ex-fixe): Intel i5-2550K | Gigabyte GA-Z68X-UD3H-B3 | Corsair Vengeance DDR3 2x 4Go @ 1600MHz | Sapphire Radeon R5 230 2Go GDDR3 | Hitachi 7K750 500Go @ 7200rpm

Hors ligne

#32 17/09/2021 21:08:01

VINDICATORs
RédactWikix and the graphicatorix!
Modérateur
Lieu : Toulouse(31) France
Inscription : 23/11/2004
Messages : 18 508
Site Web

Re : Triple-screen, Radeon RX580: config à moitié KO au réveil des écrans

Sous Xorg cela semble aller mieux (sauf l'histoire des écran EDID, mais ce n'est pas que sous Xorg... J'ai le même soucis depuis le passage sous MS windows 10 par exemple...), la maitrise de wayland est dur à mettre en place.

Au passage pour rappel (pas que pour toi d'ailleurs) :
un double ou triple écrans a quand même une incidence sur les performances des puces graphique.


AMD R7 5800x, MSI Pro Carbon X470, 32Go DDR4 3200@3400Mhz Gskill TridentZ CL14, RX 5700XT MSI WCooling OC SSD: 1x970 EVO 500Go + 1xPNY LXR8 NVME 1To + 2x500Go 860 EVO, 3x1To 860Evo, HDD 1x2To WDblack, 1x4to WDBlack, 1x3To WDRed, Purepower 1000W plat - BeQuiet Dark 900
AMD R5 2600, Asus A320, 24Go DDR4 2133Mhz, 1x250GO SSD, 3x 2To RAID5 WDBlue Cubes Chieftec/ AMD R7 2700x + 16Go DDR4 2933Mhz+1to NVME Sandisk XLR8, 2x1To QVO CMaster MasterBox Q300L
AMD A6 9500, 8Go, 250Go SSD

Hors ligne

#33 17/09/2021 21:26:14

Vorahk
Membre
Lieu : Près de Chartres
Inscription : 16/01/2019
Messages : 166

Re : Triple-screen, Radeon RX580: config à moitié KO au réveil des écrans

En effet, sous Wayland j'avais un paquet de problèmes sur mon fixe, mais bon c'est clair que vu l'ampleur du projet, ça fait pas mal de taff pour remplacer Xorg et ses dizaines d'années de dev. Sous W10 c'était pas glorieux de base, mais dès qu'il installe de lui-même le pilote AMD, ça se passe à peu près bien.

Je suis d'accord pour les perfs, ça fait bien plus de calculs pour afficher une telle surface. La résolution influe aussi: mon eeePC galère vraiment plus pour du 1080p que son 1024×600.


En y repensant, je pourrais peut-être monter un deuxième GPU pour gérer les écrans de gauche et de droite, et garder la grosse RX580 pour l'écran principal, qui est le seul qui me sert en jeu. Mais en ce moment... je vais pas trop y penser vu la difficulté à avoir des GPU à prix raisonnables hammer


PC Fixe: AMD Ryzen 5 3600X | AsRock B550 Phantom Gaming 4 | Kingston HyperX Predator DDR4 2x 8Go @ 2666MHz | Sapphire Radeon RX580 Nitro+ 4Go GDDR5 | PNY CS3030 500Go NVMe
PC portables: Asus TUF-505DV (AL062T) | Lenovo Thinkpad E520 (11433MG) | Asus eeePC 1005PE
Serveur (ex-fixe): Intel i5-2550K | Gigabyte GA-Z68X-UD3H-B3 | Corsair Vengeance DDR3 2x 4Go @ 1600MHz | Sapphire Radeon R5 230 2Go GDDR3 | Hitachi 7K750 500Go @ 7200rpm

Hors ligne

Pied de page des forums