Bonjour,
Je viens de faire l'acquisition d'un Lenovo X1 Tablet G2 i5
kiatoo.com/pc-hybrides/54104-269483-lenovo-x1-tablet-g2-i5-8go-ram-240go-ssd-windows-10.html
Sur windows (je sais, c'est pas bien ...)
Installation de la fedora 34, sur tous le disque : rien à dire, super rapide, fonctionnel dès le début, écran tactile OK, etc...
Je tourne l’écran : ca tourne, trop bien.
Je fais la mise à jour via Gnome Logiciel.
Je redémarre et je veux tester la camera, je lance cheese et .... rien ... zutre ...
Je tourne de nouveaux l'écran, et cela ne fonctionne plus (le paramètre rotation apparait bien de façon dynamique sur le menu)
Pour la camera:
lsusb et lspci
[root@fedora ~]# lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 8087:0a2b Intel Corp. Bluetooth wireless interface
Bus 001 Device 005: ID 17ef:60a3 Lenovo ThinkPad X1 Tablet Thin Keyboard Gen 2
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[root@fedora ~]# lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 02)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 615 (rev 02)
00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 02)
00:05.0 Multimedia controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Imaging Unit (rev 01)
00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model
00:13.0 Non-VGA unclassified device: Intel Corporation Sunrise Point-LP Integrated Sensor Hub (rev 21)
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:14.3 Multimedia controller: Intel Corporation CSI-2 Host Controller (rev 01)
00:15.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 (rev 21)
00:15.2 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #2 (rev 21)
00:15.3 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #3 (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
00:16.3 Serial controller: Intel Corporation Sunrise Point-LP Active Management Technology - SOL (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #1 (rev f1)
00:1c.1 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #2 (rev f1)
00:1c.3 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #4 (rev f1)
00:1c.4 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 (rev f1)
00:1e.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO UART Controller #0 (rev 21)
00:1e.2 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO SPI Controller #0 (rev 21)
00:1f.0 ISA bridge: Intel Corporation Device 9d4b (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS522A PCI Express Card Reader (rev 01)
04:00.0 Network controller: Intel Corporation Wireless 8265 / 8275 (rev 78)
05:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961/SM963
Je ne vois aucun bouton d'activation rien, c'est unquiétant ....
Pour la rotation :
https://lutim.stemy.me/bkSzKXXQ/7xBPoRvg.png actif ou non ne semble rien changer.
Dernière chose : il semble que je ne puisse pas saisir le mot de passe luks sans brancher le clavier : existe t'il un moyen de faire apparaitre le clavier lors du démarrage gnome ?
Merci