oui, tout va bien sauf la couleur.
le model est
Scanner HP LaserJet MFP M28-M31
je n'ai pas de source direct.
En tapant dans Google, plusieurs personnes se sont plaintes dans divers forums que le scan scanne seulement en noir et blanc.
Les solutions étaient souvent de choisir l'option "image" dans simple scan ou d'installer hp-pluging. Or j'ai déjà fait ces deux choses-là.
un exemple
https://forum.ubuntu-fr.org/viewtopic.php?id=63340
encore un autre exemple
https://ubuntuforums.org/showthread.php?t=1978833
dmesg
[ 0.000000] Linux version 5.8.15-301.fc33.x86_64 (mockbuild@bkernel01.iad2.fedoraproject.org) (gcc (GCC) 10.2.1 20200826 (Red Hat 10.2.1-3), GNU ld version 2.35-10.fc33) #1 SMP Thu Oct 15 16:58:06 UTC 2020
[ 0.000000] Command line: BOOT_IMAGE=(hd1,gpt3)/vmlinuz-5.8.15-301.fc33.x86_64 root=UUID=92c1c790-6644-4879-b6ef-68e85c997ace ro rootflags=subvol=root rd.luks.uuid=luks-d20a639d-8ec4-4b49-8a44-9a61958f8bb6 rhgb quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000088d0ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000088d10000-0x0000000088d52fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000088d53000-0x0000000088d5cfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000088d5d000-0x0000000088d8efff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000088d8f000-0x0000000088e38fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000088e39000-0x0000000088e8efff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000088e8f000-0x0000000088ecafff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000088ecb000-0x0000000088efefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000088eff000-0x0000000088f83fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000088f84000-0x0000000088feffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000088ff0000-0x0000000088ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000089000000-0x000000008f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe10000-0x00000000ffe3ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x7475b190-0x7476b1cf] usable ==> usable
[ 0.000000] e820: update [mem 0x7475b190-0x7476b1cf] usable ==> usable
[ 0.000000] e820: update [mem 0x7476c810-0x7476ccca] usable ==> usable
[ 0.000000] e820: update [mem 0x7476c810-0x7476ccca] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000008efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000008f000-0x000000000008ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000007475b18f] usable
[ 0.000000] reserve setup_data: [mem 0x000000007475b190-0x000000007476b1cf] usable
[ 0.000000] reserve setup_data: [mem 0x000000007476b1d0-0x000000007476c80f] usable
[ 0.000000] reserve setup_data: [mem 0x000000007476c810-0x000000007476ccca] usable
[ 0.000000] reserve setup_data: [mem 0x000000007476cccb-0x0000000088d0ffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000088d10000-0x0000000088d52fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000088d53000-0x0000000088d5cfff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000088d5d000-0x0000000088d8efff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x0000000088d8f000-0x0000000088e38fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000088e39000-0x0000000088e8efff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000088e8f000-0x0000000088ecafff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000088ecb000-0x0000000088efefff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000088eff000-0x0000000088f83fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000088f84000-0x0000000088feffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000088ff0000-0x0000000088ffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000089000000-0x000000008f9fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffe10000-0x00000000ffe3ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000026f5fffff] usable
[ 0.000000] efi: EFI v1.10 by Apple
[ 0.000000] efi: ACPI=0x88d8e000 ACPI 2.0=0x88d8e014 SMBIOS=0x88d11000
[ 0.000000] secureboot: Secure boot disabled
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Apple Inc. Macmini7,1/Mac-35C5E08120C7EEAF, BIOS 249.0.0.0.0 06/11/2020
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2599.937 MHz processor
[ 0.000084] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000085] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000092] last_pfn = 0x26f600 max_arch_pfn = 0x400000000
[ 0.000095] MTRR default type: write-back
[ 0.000096] MTRR fixed ranges enabled:
[ 0.000097] 00000-9FFFF write-back
[ 0.000098] A0000-BFFFF uncachable
[ 0.000099] C0000-DFFFF write-protect
[ 0.000099] E0000-FFFFF uncachable
[ 0.000100] MTRR variable ranges enabled:
[ 0.000101] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000102] 1 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000103] 2 base 0090000000 mask 7FF0000000 uncachable
[ 0.000103] 3 base 008C000000 mask 7FFC000000 uncachable
[ 0.000104] 4 base 008A000000 mask 7FFE000000 uncachable
[ 0.000105] 5 base 0089000000 mask 7FFF000000 uncachable
[ 0.000105] 6 disabled
[ 0.000106] 7 disabled
[ 0.000106] 8 disabled
[ 0.000106] 9 disabled
[ 0.000408] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000525] last_pfn = 0x89000 max_arch_pfn = 0x400000000
[ 0.015223] Using GB pages for direct mapping
[ 0.016087] secureboot: Secure boot disabled
[ 0.016088] RAMDISK: [mem 0x54efc000-0x57075fff]
[ 0.016092] ACPI: Early table checksum verification disabled
[ 0.016094] ACPI: RSDP 0x0000000088D8E014 000024 (v02 APPLE )
[ 0.016097] ACPI: XSDT 0x0000000088D8E1C0 00009C (v01 APPLE Apple00 00000000 01000013)
[ 0.016102] ACPI: FACP 0x0000000088D8C000 0000F4 (v05 APPLE Apple00 00000000 Loki 0000005F)
[ 0.016106] ACPI: DSDT 0x0000000088D7F000 0073AE (v03 APPLE Macmini 00070001 INTL 20100915)
[ 0.016108] ACPI: FACS 0x0000000088D18000 000040
[ 0.016110] ACPI: FACS 0x0000000088D18000 000040
[ 0.016112] ACPI: HPET 0x0000000088D8B000 000038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.016114] ACPI: APIC 0x0000000088D8A000 0000BC (v02 APPLE Apple00 00000001 Loki 0000005F)
[ 0.016117] ACPI: SBST 0x0000000088D88000 000030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.016119] ACPI: ECDT 0x0000000088D87000 000053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.016121] ACPI: SSDT 0x0000000088D7E000 000222 (v01 APPLE SataAhci 00001000 INTL 20100915)
[ 0.016123] ACPI: SSDT 0x0000000088D7D000 000024 (v01 APPLE SmcDppt 00001000 INTL 20100915)
[ 0.016126] ACPI: SSDT 0x0000000088D75000 0010FC (v01 APPLE UsbLpt 00001000 INTL 20100915)
[ 0.016128] ACPI: SSDT 0x0000000088D74000 000032 (v01 APPLE SsdtS3 00001000 INTL 20100915)
[ 0.016130] ACPI: SSDT 0x0000000088D70000 003012 (v01 APPLE PcieTbt 00001000 INTL 20100915)
[ 0.016132] ACPI: SSDT 0x0000000088D61000 0000B8 (v01 APPLE Sdxc 00001000 INTL 20100915)
[ 0.016134] ACPI: SSDT 0x0000000088D5F000 000594 (v01 PmRef Cpu0Ist 00003000 INTL 20100915)
[ 0.016137] ACPI: SSDT 0x0000000088D5E000 000B83 (v01 PmRef CpuPm 00003000 INTL 20100915)
[ 0.016139] ACPI: DMAR 0x0000000088D5D000 000088 (v01 APPLE HSW 00000001 AAPL 00000001)
[ 0.016141] ACPI: MCFG 0x0000000088D89000 00003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.016146] ACPI: DMI detected to setup _OSI("Darwin"): Apple hardware
[ 0.016148] ACPI: Local APIC address 0xfee00000
[ 0.016193] No NUMA configuration found
[ 0.016194] Faking a node at [mem 0x0000000000000000-0x000000026f5fffff]
[ 0.016204] NODE_DATA(0) allocated [mem 0x26f5d5000-0x26f5fffff]
[ 0.032041] Zone ranges:
[ 0.032043] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.032044] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.032045] Normal [mem 0x0000000100000000-0x000000026f5fffff]
[ 0.032046] Device empty
[ 0.032046] Movable zone start for each node
[ 0.032050] Early memory node ranges
[ 0.032051] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.032051] node 0: [mem 0x0000000000059000-0x000000000008efff]
[ 0.032052] node 0: [mem 0x0000000000090000-0x000000000009ffff]
[ 0.032053] node 0: [mem 0x0000000000100000-0x0000000088d0ffff]
[ 0.032053] node 0: [mem 0x0000000088d53000-0x0000000088d5cfff]
[ 0.032054] node 0: [mem 0x0000000088d8f000-0x0000000088e38fff]
[ 0.032054] node 0: [mem 0x0000000088e8f000-0x0000000088ecafff]
[ 0.032055] node 0: [mem 0x0000000088eff000-0x0000000088f83fff]
[ 0.032055] node 0: [mem 0x0000000088ff0000-0x0000000088ffffff]
[ 0.032056] node 0: [mem 0x0000000100000000-0x000000026f5fffff]
[ 0.032351] Zeroed struct page in unavailable ranges: 31694 pages
[ 0.032353] Initmem setup node 0 [mem 0x0000000000001000-0x000000026f5fffff]
[ 0.032355] On node 0 totalpages: 2065458
[ 0.032356] DMA zone: 64 pages used for memmap
[ 0.032356] DMA zone: 22 pages reserved
[ 0.032357] DMA zone: 3997 pages, LIFO batch:0
[ 0.032388] DMA32 zone: 8699 pages used for memmap
[ 0.032389] DMA32 zone: 556693 pages, LIFO batch:63
[ 0.036583] Normal zone: 23512 pages used for memmap
[ 0.036585] Normal zone: 1504768 pages, LIFO batch:63
[ 0.047891] Reserving Intel graphics memory at [mem 0x89a00000-0x8f9fffff]
[ 0.047955] ACPI: PM-Timer IO Port: 0x1808
[ 0.047956] ACPI: Local APIC address 0xfee00000
[ 0.047963] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.047964] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.047964] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.047965] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.047965] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.047966] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.047966] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.047967] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.047977] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.047979] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.047980] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.047981] ACPI: IRQ0 used by override.
[ 0.047982] ACPI: IRQ9 used by override.
[ 0.047984] Using ACPI (MADT) for SMP configuration information
[ 0.047985] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.047988] TSC deadline timer available
[ 0.047989] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.048009] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.048010] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.048012] PM: hibernation: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.048013] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000bffff]
[ 0.048013] PM: hibernation: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.048015] PM: hibernation: Registered nosave memory: [mem 0x7475b000-0x7475bfff]
[ 0.048016] PM: hibernation: Registered nosave memory: [mem 0x7476b000-0x7476bfff]
[ 0.048017] PM: hibernation: Registered nosave memory: [mem 0x7476c000-0x7476cfff]
[ 0.048018] PM: hibernation: Registered nosave memory: [mem 0x7476c000-0x7476cfff]
[ 0.048020] PM: hibernation: Registered nosave memory: [mem 0x88d10000-0x88d52fff]
[ 0.048021] PM: hibernation: Registered nosave memory: [mem 0x88d5d000-0x88d8efff]
[ 0.048022] PM: hibernation: Registered nosave memory: [mem 0x88e39000-0x88e8efff]
[ 0.048024] PM: hibernation: Registered nosave memory: [mem 0x88ecb000-0x88efefff]
[ 0.048025] PM: hibernation: Registered nosave memory: [mem 0x88f84000-0x88feffff]
[ 0.048027] PM: hibernation: Registered nosave memory: [mem 0x89000000-0x8f9fffff]
[ 0.048027] PM: hibernation: Registered nosave memory: [mem 0x8fa00000-0xe00f7fff]
[ 0.048028] PM: hibernation: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[ 0.048028] PM: hibernation: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
[ 0.048029] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.048029] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xffe0ffff]
[ 0.048030] PM: hibernation: Registered nosave memory: [mem 0xffe10000-0xffe3ffff]
[ 0.048030] PM: hibernation: Registered nosave memory: [mem 0xffe40000-0xffffffff]
[ 0.048032] [mem 0x8fa00000-0xe00f7fff] available for PCI devices
[ 0.048034] Booting paravirtualized kernel on bare hardware
[ 0.048037] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.053168] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.053359] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[ 0.053365] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[ 0.053366] pcpu-alloc: [0] 0 1 2 3
[ 0.053394] Built 1 zonelists, mobility grouping on. Total pages: 2033161
[ 0.053394] Policy zone: Normal
[ 0.053396] Kernel command line: BOOT_IMAGE=(hd1,gpt3)/vmlinuz-5.8.15-301.fc33.x86_64 root=UUID=92c1c790-6644-4879-b6ef-68e85c997ace ro rootflags=subvol=root rd.luks.uuid=luks-d20a639d-8ec4-4b49-8a44-9a61958f8bb6 rhgb quiet
[ 0.053887] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.054094] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.054137] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.078428] Memory: 7642604K/8261832K available (14339K kernel code, 2498K rwdata, 8752K rodata, 2508K init, 4636K bss, 619228K reserved, 0K cma-reserved)
[ 0.078435] random: get_random_u64 called from __kmem_cache_create+0x3e/0x610 with crng_init=0
[ 0.078552] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.078565] Kernel/User page tables isolation: enabled
[ 0.078591] ftrace: allocating 43518 entries in 170 pages
[ 0.093979] ftrace: allocated 170 pages with 4 groups
[ 0.094065] rcu: Hierarchical RCU implementation.
[ 0.094066] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.094067] Trampoline variant of Tasks RCU enabled.
[ 0.094067] Rude variant of Tasks RCU enabled.
[ 0.094067] Tracing variant of Tasks RCU enabled.
[ 0.094068] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.094069] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.097291] NR_IRQS: 524544, nr_irqs: 728, preallocated irqs: 16
[ 0.097590] random: crng done (trusting CPU's manufacturer)
[ 0.097614] Console: colour dummy device 80x25
[ 0.097620] printk: console [tty0] enabled
[ 0.097637] ACPI: Core revision 20200528
[ 0.097743] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.097753] APIC: Switch to symmetric I/O mode setup
[ 0.097755] DMAR: Host address width 39
[ 0.097756] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.097761] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.097762] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.097765] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 0.097765] DMAR: RMRR base: 0x00000089800000 end: 0x0000008f9fffff
[ 0.097768] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.097769] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.097770] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.098288] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.098289] x2apic enabled
[ 0.098295] Switched APIC routing to cluster x2apic.
[ 0.098908] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.103755] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a0087f65, max_idle_ns: 440795274038 ns
[ 0.103759] Calibrating delay loop (skipped), value calculated using timer frequency.. 5199.87 BogoMIPS (lpj=2599937)
[ 0.103761] pid_max: default: 32768 minimum: 301
[ 0.117800] LSM: Security Framework initializing
[ 0.117813] Yama: becoming mindful.
[ 0.117820] SELinux: Initializing.
[ 0.117867] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.117885] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.118151] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.118163] process: using mwait in idle threads
[ 0.118165] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.118166] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.118169] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.118171] Spectre V2 : Mitigation: Full generic retpoline
[ 0.118171] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.118171] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.118173] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.118173] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.118174] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.118178] SRBDS: Mitigation: Microcode
[ 0.118178] MDS: Mitigation: Clear CPU buffers
[ 0.118387] Freeing SMP alternatives memory: 40K
[ 0.120700] smpboot: CPU0: Intel(R) Core(TM) i5-4278U CPU @ 2.60GHz (family: 0x6, model: 0x45, stepping: 0x1)
[ 0.120756] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.120756] ... version: 3
[ 0.120756] ... bit width: 48
[ 0.120756] ... generic registers: 4
[ 0.120756] ... value mask: 0000ffffffffffff
[ 0.120756] ... max period: 00007fffffffffff
[ 0.120756] ... fixed-purpose events: 3
[ 0.120756] ... event mask: 000000070000000f
[ 0.120756] rcu: Hierarchical SRCU implementation.
[ 0.120756] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.120756] smp: Bringing up secondary CPUs ...
[ 0.120761] x86: Booting SMP configuration:
[ 0.120762] .... node #0, CPUs: #1 #2
[ 0.121200] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.121824] #3
[ 0.122154] smp: Brought up 1 node, 4 CPUs
[ 0.122154] smpboot: Max logical packages: 1
[ 0.122154] smpboot: Total of 4 processors activated (20799.49 BogoMIPS)
[ 0.123055] devtmpfs: initialized
[ 0.123055] x86/mm: Memory block size: 128MB
[ 0.123794] PM: Registering ACPI NVS region [mem 0x88d10000-0x88d52fff] (274432 bytes)
[ 0.123877] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.123877] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.123877] xor: automatically using best checksumming function avx
[ 0.123877] pinctrl core: initialized pinctrl subsystem
[ 0.123914] PM: RTC time: 13:44:20, date: 2020-10-19
[ 0.123915] thermal_sys: Registered thermal governor 'fair_share'
[ 0.123916] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.123916] thermal_sys: Registered thermal governor 'step_wise'
[ 0.123917] thermal_sys: Registered thermal governor 'user_space'
[ 0.124019] NET: Registered protocol family 16
[ 0.124113] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.124116] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.124119] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.124127] audit: initializing netlink subsys (disabled)
[ 0.124136] audit: type=2000 audit(1603115060.025:1): state=initialized audit_enabled=0 res=1
[ 0.124136] cpuidle: using governor menu
[ 0.124136] ACPI: bus type PCI registered
[ 0.124136] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.124136] PCI: MMCONFIG for domain 0000 [bus 00-9a] at [mem 0xe0000000-0xe9afffff] (base 0xe0000000)
[ 0.124136] PCI: not using MMCONFIG
[ 0.124136] PCI: Using configuration type 1 for base access
[ 0.124136] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.124796] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.125783] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.125783] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.276767] cryptd: max_cpu_qlen set to 1000
[ 0.277834] alg: No test for 842 (842-generic)
[ 0.277834] alg: No test for 842 (842-scomp)
[ 0.279934] raid6: skip pq benchmark and using algorithm avx2x4
[ 0.279934] raid6: using avx2x2 recovery algorithm
[ 0.279934] ACPI: Disabled all _OSI OS vendors
[ 0.279934] ACPI: Added _OSI(Module Device)
[ 0.279934] ACPI: Added _OSI(Processor Device)
[ 0.279934] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.279934] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.279934] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.279934] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.279934] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.279934] ACPI: Added _OSI(Darwin)
[ 0.288564] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.289130] ACPI: EC: EC started
[ 0.289131] ACPI: EC: interrupt blocked
[ 0.290086] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.290087] ACPI: EC: Boot ECDT EC used to handle transactions
[ 0.290332] ACPI: BIOS _OSI(Darwin) query honored via DMI
[ 0.290775] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.290923] ACPI Error: Needed type [Reference], found [Integer] 00000000c8672956 (20200528/exresop-66)
[ 0.290926] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20200528/dswexec-431)
[ 0.290929] ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_AML_OPERAND_TYPE) (20200528/psparse-529)
[ 0.291205] ACPI: Dynamic OEM Table Load:
[ 0.291211] ACPI: SSDT 0xFFFF8C42E5138000 00067C (v01 PmRef ApIst 00003000 INTL 20100915)
[ 0.292089] ACPI: Dynamic OEM Table Load:
[ 0.292093] ACPI: SSDT 0xFFFF8C42E5643400 000119 (v01 PmRef ApCst 00003000 INTL 20100915)
[ 0.293219] ACPI: Interpreter enabled
[ 0.293250] ACPI: (supports S0 S3 S4 S5)
[ 0.293251] ACPI: Using IOAPIC for interrupt routing
[ 0.293276] PCI: MMCONFIG for domain 0000 [bus 00-9a] at [mem 0xe0000000-0xe9afffff] (base 0xe0000000)
[ 0.293658] PCI: MMCONFIG at [mem 0xe0000000-0xe9afffff] reserved in ACPI motherboard resources
[ 0.293669] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.293851] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.300649] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.300653] acpi PNP0A08:00: _OSC: OS assumes control of [PCIeHotplug SHPCHotplug AER PCIeCapability LTR DPC]
[ 0.300669] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-9a] only partially covers this bridge
[ 0.300874] PCI host bridge to bus 0000:00
[ 0.300876] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.300877] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.300878] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.300879] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.300880] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.300881] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.300882] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.300883] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.300884] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.300884] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.300885] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.300886] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.300887] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.300888] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.300889] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.300889] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.300890] pci_bus 0000:00: root bus resource [mem 0x8fa00000-0xfeafffff window]
[ 0.300891] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.300892] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.300914] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.301002] pci 0000:00:02.0: [8086:0a2e] type 00 class 0x030000
[ 0.301012] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa03fffff 64bit]
[ 0.301018] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.301021] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
[ 0.301032] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.301111] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.301120] pci 0000:00:03.0: reg 0x10: [mem 0xa0810000-0xa0813fff 64bit]
[ 0.301227] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.301244] pci 0000:00:14.0: reg 0x10: [mem 0xa0800000-0xa080ffff 64bit]
[ 0.301295] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.301423] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.301444] pci 0000:00:16.0: reg 0x10: [mem 0xa082a900-0xa082a91f 64bit]
[ 0.301505] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.301564] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.301581] pci 0000:00:1b.0: reg 0x10: [mem 0xa0814000-0xa0817fff 64bit]
[ 0.301642] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.301703] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.301774] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.301838] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[ 0.301917] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.302017] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 0.302096] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.302192] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
[ 0.302263] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.302361] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.302524] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.302537] pci 0000:00:1f.2: reg 0x10: [io 0x2088-0x208f]
[ 0.302543] pci 0000:00:1f.2: reg 0x14: [io 0x2094-0x2097]
[ 0.302548] pci 0000:00:1f.2: reg 0x18: [io 0x2080-0x2087]
[ 0.302554] pci 0000:00:1f.2: reg 0x1c: [io 0x2090-0x2093]
[ 0.302559] pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f]
[ 0.302565] pci 0000:00:1f.2: reg 0x24: [mem 0xa082a000-0xa082a7ff]
[ 0.302595] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.302652] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.302667] pci 0000:00:1f.3: reg 0x10: [mem 0xa082a800-0xa082a8ff 64bit]
[ 0.302683] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.302777] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.302884] pci 0000:02:00.0: [14e4:43a0] type 00 class 0x028000
[ 0.302943] pci 0000:02:00.0: reg 0x10: [mem 0xa0600000-0xa0607fff 64bit]
[ 0.302969] pci 0000:02:00.0: reg 0x18: [mem 0xa0400000-0xa05fffff 64bit]
[ 0.303175] pci 0000:02:00.0: supports D1 D2
[ 0.303176] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.303436] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.303440] pci 0000:00:1c.2: bridge window [mem 0xa0400000-0xa06fffff]
[ 0.303536] pci 0000:03:00.0: [14e4:1686] type 00 class 0x020000
[ 0.303573] pci 0000:03:00.0: reg 0x10: [mem 0xa0700000-0xa070ffff 64bit pref]
[ 0.303591] pci 0000:03:00.0: reg 0x18: [mem 0xa0710000-0xa071ffff 64bit pref]
[ 0.303728] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.303880] pci 0000:03:00.1: [14e4:16bc] type 00 class 0x080501
[ 0.303915] pci 0000:03:00.1: reg 0x10: [mem 0xa0720000-0xa072ffff 64bit pref]
[ 0.304047] pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
[ 0.304215] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.304221] pci 0000:00:1c.3: bridge window [mem 0xa0700000-0xa07fffff 64bit pref]
[ 0.304274] pci 0000:04:00.0: [8086:156d] type 01 class 0x060400
[ 0.304336] pci 0000:04:00.0: enabling Extended Tags
[ 0.304415] pci 0000:04:00.0: supports D1 D2
[ 0.304416] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.307778] pci 0000:00:1c.4: PCI bridge to [bus 04-9a]
[ 0.307781] pci 0000:00:1c.4: bridge window [io 0x3000-0x5fff]
[ 0.307783] pci 0000:00:1c.4: bridge window [mem 0xa0900000-0xac9fffff]
[ 0.307787] pci 0000:00:1c.4: bridge window [mem 0xaca00000-0xb89fffff 64bit pref]
[ 0.307903] pci 0000:05:00.0: [8086:156d] type 01 class 0x060400
[ 0.307971] pci 0000:05:00.0: enabling Extended Tags
[ 0.308053] pci 0000:05:00.0: supports D1 D2
[ 0.308054] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.308174] pci 0000:05:03.0: [8086:156d] type 01 class 0x060400
[ 0.308234] pci 0000:05:03.0: enabling Extended Tags
[ 0.308318] pci 0000:05:03.0: supports D1 D2
[ 0.308318] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.308433] pci 0000:05:04.0: [8086:156d] type 01 class 0x060400
[ 0.308492] pci 0000:05:04.0: enabling Extended Tags
[ 0.308575] pci 0000:05:04.0: supports D1 D2
[ 0.308576] pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.308692] pci 0000:05:05.0: [8086:156d] type 01 class 0x060400
[ 0.308751] pci 0000:05:05.0: enabling Extended Tags
[ 0.308836] pci 0000:05:05.0: supports D1 D2
[ 0.308837] pci 0000:05:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.308959] pci 0000:05:06.0: [8086:156d] type 01 class 0x060400
[ 0.309018] pci 0000:05:06.0: enabling Extended Tags
[ 0.309102] pci 0000:05:06.0: supports D1 D2
[ 0.309102] pci 0000:05:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.309238] pci 0000:04:00.0: PCI bridge to [bus 05-6a]
[ 0.309244] pci 0000:04:00.0: bridge window [io 0x3000-0x4fff]
[ 0.309247] pci 0000:04:00.0: bridge window [mem 0xa0900000-0xa89fffff]
[ 0.309253] pci 0000:04:00.0: bridge window [mem 0xaca00000-0xb49fffff 64bit pref]
[ 0.309314] pci 0000:06:00.0: [8086:156c] type 00 class 0x088000
[ 0.309349] pci 0000:06:00.0: reg 0x10: [mem 0xa0900000-0xa093ffff]
[ 0.309361] pci 0000:06:00.0: reg 0x14: [mem 0xa0940000-0xa0940fff]
[ 0.309426] pci 0000:06:00.0: enabling Extended Tags
[ 0.309532] pci 0000:06:00.0: supports D1 D2
[ 0.309533] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.312788] pci 0000:05:00.0: PCI bridge to [bus 06]
[ 0.312797] pci 0000:05:00.0: bridge window [mem 0xa0900000-0xa09fffff]
[ 0.312872] pci 0000:05:03.0: PCI bridge to [bus 07-37]
[ 0.312878] pci 0000:05:03.0: bridge window [io 0x3000-0x3fff]
[ 0.312882] pci 0000:05:03.0: bridge window [mem 0xa0a00000-0xa49fffff]
[ 0.312887] pci 0000:05:03.0: bridge window [mem 0xaca00000-0xb09fffff 64bit pref]
[ 0.312951] pci 0000:05:04.0: PCI bridge to [bus 38]
[ 0.313026] pci 0000:05:05.0: PCI bridge to [bus 39-69]
[ 0.313032] pci 0000:05:05.0: bridge window [io 0x4000-0x4fff]
[ 0.313035] pci 0000:05:05.0: bridge window [mem 0xa4a00000-0xa89fffff]
[ 0.313041] pci 0000:05:05.0: bridge window [mem 0xb0a00000-0xb49fffff 64bit pref]
[ 0.313080] pci 0000:05:06.0: PCI bridge to [bus 6a]
[ 0.313922] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.313961] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.313998] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.314034] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.314070] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.314106] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.314142] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.314177] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.314760] ACPI: EC: interrupt unblocked
[ 0.314760] ACPI: EC: event unblocked
[ 0.314760] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.314760] ACPI: EC: GPE=0x4e
[ 0.314760] ACPI: \_SB_.PCI0.LPCB.EC__: Boot ECDT EC initialization complete
[ 0.314760] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events
[ 0.314769] iommu: Default domain type: Translated
[ 0.314771] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.314771] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.314771] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.314771] vgaarb: loaded
[ 0.314848] SCSI subsystem initialized
[ 0.314859] libata version 3.00 loaded.
[ 0.314859] ACPI: bus type USB registered
[ 0.314859] usbcore: registered new interface driver usbfs
[ 0.314859] usbcore: registered new interface driver hub
[ 0.314859] usbcore: registered new device driver usb
[ 0.314859] pps_core: LinuxPPS API ver. 1 registered
[ 0.314859] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.314859] PTP clock support registered
[ 0.314876] EDAC MC: Ver: 3.0.0
[ 0.315783] Registered efivars operations
[ 0.315868] NetLabel: Initializing
[ 0.315868] NetLabel: domain hash size = 128
[ 0.315869] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.315881] NetLabel: unlabeled traffic allowed by default
[ 0.315881] PCI: Using ACPI for IRQ routing
[ 0.320450] PCI: pci_cache_line_size set to 64 bytes
[ 0.320628] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.320629] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.320630] e820: reserve RAM buffer [mem 0x7475b190-0x77ffffff]
[ 0.320631] e820: reserve RAM buffer [mem 0x7476c810-0x77ffffff]
[ 0.320632] e820: reserve RAM buffer [mem 0x88d10000-0x8bffffff]
[ 0.320633] e820: reserve RAM buffer [mem 0x88d5d000-0x8bffffff]
[ 0.320635] e820: reserve RAM buffer [mem 0x88e39000-0x8bffffff]
[ 0.320636] e820: reserve RAM buffer [mem 0x88ecb000-0x8bffffff]
[ 0.320637] e820: reserve RAM buffer [mem 0x88f84000-0x8bffffff]
[ 0.320638] e820: reserve RAM buffer [mem 0x89000000-0x8bffffff]
[ 0.320638] e820: reserve RAM buffer [mem 0x26f600000-0x26fffffff]
[ 0.320823] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.320827] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.322774] clocksource: Switched to clocksource tsc-early
[ 0.339965] VFS: Disk quotas dquot_6.6.0
[ 0.339978] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.340039] pnp: PnP ACPI init
[ 0.340227] system 00:00: [mem 0xfed00000-0xfed03fff] has been reserved
[ 0.340233] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.340275] system 00:01: [io 0xffff] has been reserved
[ 0.340276] system 00:01: [io 0x1800-0x187f] has been reserved
[ 0.340277] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.340280] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.340295] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.340944] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.340945] system 00:03: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.340946] system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.340947] system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.340949] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.340950] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.340951] system 00:03: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.340952] system 00:03: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.340954] system 00:03: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.340955] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.340958] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.341008] system 00:04: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.341009] system 00:04: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.341011] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.341096] pnp: PnP ACPI: found 5 devices
[ 0.342153] pci 0000:00:02.0: assigning 3 device properties
[ 0.342164] pci 0000:06:00.0: assigning 8 device properties
[ 0.342171] pci 0000:00:1b.0: assigning 4 device properties
[ 0.346687] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.346737] NET: Registered protocol family 2
[ 0.346880] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.346891] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.346956] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.347081] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.347165] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.347181] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.347229] NET: Registered protocol family 1
[ 0.347233] NET: Registered protocol family 44
[ 0.347241] pci 0000:05:00.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
[ 0.347243] pci 0000:05:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000
[ 0.347245] pci 0000:05:04.0: bridge window [io 0x1000-0x0fff] to [bus 38] add_size 1000
[ 0.347246] pci 0000:05:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 38] add_size 200000 add_align 100000
[ 0.347247] pci 0000:05:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 38] add_size 200000 add_align 100000
[ 0.347249] pci 0000:05:06.0: bridge window [io 0x1000-0x0fff] to [bus 6a] add_size 1000
[ 0.347250] pci 0000:05:06.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 6a] add_size 200000 add_align 100000
[ 0.347251] pci 0000:05:06.0: bridge window [mem 0x00100000-0x000fffff] to [bus 6a] add_size 200000 add_align 100000
[ 0.347255] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.347266] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.347270] pci 0000:00:1c.2: bridge window [mem 0xa0400000-0xa06fffff]
[ 0.347276] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.347282] pci 0000:00:1c.3: bridge window [mem 0xa0700000-0xa07fffff 64bit pref]
[ 0.347291] pci 0000:05:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.347293] pci 0000:05:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.347294] pci 0000:05:04.0: BAR 14: no space for [mem size 0x00200000]
[ 0.347295] pci 0000:05:04.0: BAR 14: failed to assign [mem size 0x00200000]
[ 0.347297] pci 0000:05:04.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.347297] pci 0000:05:04.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.347299] pci 0000:05:06.0: BAR 14: no space for [mem size 0x00200000]
[ 0.347299] pci 0000:05:06.0: BAR 14: failed to assign [mem size 0x00200000]
[ 0.347301] pci 0000:05:06.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.347302] pci 0000:05:06.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.347303] pci 0000:05:00.0: BAR 13: no space for [io size 0x1000]
[ 0.347304] pci 0000:05:00.0: BAR 13: failed to assign [io size 0x1000]
[ 0.347305] pci 0000:05:04.0: BAR 13: no space for [io size 0x1000]
[ 0.347306] pci 0000:05:04.0: BAR 13: failed to assign [io size 0x1000]
[ 0.347307] pci 0000:05:06.0: BAR 13: no space for [io size 0x1000]
[ 0.347308] pci 0000:05:06.0: BAR 13: failed to assign [io size 0x1000]
[ 0.347310] pci 0000:05:06.0: BAR 14: no space for [mem size 0x00200000]
[ 0.347310] pci 0000:05:06.0: BAR 14: failed to assign [mem size 0x00200000]
[ 0.347312] pci 0000:05:06.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.347313] pci 0000:05:06.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.347314] pci 0000:05:06.0: BAR 13: no space for [io size 0x1000]
[ 0.347315] pci 0000:05:06.0: BAR 13: failed to assign [io size 0x1000]
[ 0.347316] pci 0000:05:04.0: BAR 14: no space for [mem size 0x00200000]
[ 0.347317] pci 0000:05:04.0: BAR 14: failed to assign [mem size 0x00200000]
[ 0.347319] pci 0000:05:04.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.347320] pci 0000:05:04.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.347321] pci 0000:05:04.0: BAR 13: no space for [io size 0x1000]
[ 0.347322] pci 0000:05:04.0: BAR 13: failed to assign [io size 0x1000]
[ 0.347323] pci 0000:05:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.347324] pci 0000:05:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.347325] pci 0000:05:00.0: BAR 13: no space for [io size 0x1000]
[ 0.347326] pci 0000:05:00.0: BAR 13: failed to assign [io size 0x1000]
[ 0.347327] pci 0000:05:00.0: PCI bridge to [bus 06]
[ 0.347332] pci 0000:05:00.0: bridge window [mem 0xa0900000-0xa09fffff]
[ 0.347341] pci 0000:05:03.0: PCI bridge to [bus 07-37]
[ 0.347343] pci 0000:05:03.0: bridge window [io 0x3000-0x3fff]
[ 0.347348] pci 0000:05:03.0: bridge window [mem 0xa0a00000-0xa49fffff]
[ 0.347352] pci 0000:05:03.0: bridge window [mem 0xaca00000-0xb09fffff 64bit pref]
[ 0.347358] pci 0000:05:04.0: PCI bridge to [bus 38]
[ 0.347370] pci 0000:05:05.0: PCI bridge to [bus 39-69]
[ 0.347372] pci 0000:05:05.0: bridge window [io 0x4000-0x4fff]
[ 0.347377] pci 0000:05:05.0: bridge window [mem 0xa4a00000-0xa89fffff]
[ 0.347380] pci 0000:05:05.0: bridge window [mem 0xb0a00000-0xb49fffff 64bit pref]
[ 0.347386] pci 0000:05:06.0: PCI bridge to [bus 6a]
[ 0.347399] pci 0000:04:00.0: PCI bridge to [bus 05-6a]
[ 0.347401] pci 0000:04:00.0: bridge window [io 0x3000-0x4fff]
[ 0.347405] pci 0000:04:00.0: bridge window [mem 0xa0900000-0xa89fffff]
[ 0.347409] pci 0000:04:00.0: bridge window [mem 0xaca00000-0xb49fffff 64bit pref]
[ 0.347414] pci 0000:00:1c.4: PCI bridge to [bus 04-9a]
[ 0.347416] pci 0000:00:1c.4: bridge window [io 0x3000-0x5fff]
[ 0.347419] pci 0000:00:1c.4: bridge window [mem 0xa0900000-0xac9fffff]
[ 0.347422] pci 0000:00:1c.4: bridge window [mem 0xaca00000-0xb89fffff 64bit pref]
[ 0.347427] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.347428] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.347429] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.347430] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.347431] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.347432] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.347433] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.347434] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.347434] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.347435] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.347436] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.347437] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.347438] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.347439] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.347440] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.347441] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.347442] pci_bus 0000:00: resource 20 [mem 0x8fa00000-0xfeafffff window]
[ 0.347443] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.347444] pci_bus 0000:02: resource 1 [mem 0xa0400000-0xa06fffff]
[ 0.347445] pci_bus 0000:03: resource 2 [mem 0xa0700000-0xa07fffff 64bit pref]
[ 0.347446] pci_bus 0000:04: resource 0 [io 0x3000-0x5fff]
[ 0.347447] pci_bus 0000:04: resource 1 [mem 0xa0900000-0xac9fffff]
[ 0.347448] pci_bus 0000:04: resource 2 [mem 0xaca00000-0xb89fffff 64bit pref]
[ 0.347449] pci_bus 0000:05: resource 0 [io 0x3000-0x4fff]
[ 0.347450] pci_bus 0000:05: resource 1 [mem 0xa0900000-0xa89fffff]
[ 0.347451] pci_bus 0000:05: resource 2 [mem 0xaca00000-0xb49fffff 64bit pref]
[ 0.347452] pci_bus 0000:06: resource 1 [mem 0xa0900000-0xa09fffff]
[ 0.347453] pci_bus 0000:07: resource 0 [io 0x3000-0x3fff]
[ 0.347453] pci_bus 0000:07: resource 1 [mem 0xa0a00000-0xa49fffff]
[ 0.347454] pci_bus 0000:07: resource 2 [mem 0xaca00000-0xb09fffff 64bit pref]
[ 0.347455] pci_bus 0000:39: resource 0 [io 0x4000-0x4fff]
[ 0.347456] pci_bus 0000:39: resource 1 [mem 0xa4a00000-0xa89fffff]
[ 0.347457] pci_bus 0000:39: resource 2 [mem 0xb0a00000-0xb49fffff 64bit pref]
[ 0.347549] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.347829] PCI: CLS 256 bytes, default 64
[ 0.347865] Trying to unpack rootfs image as initramfs...
[ 0.811946] Freeing initrd memory: 34280K
[ 0.818788] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.818790] software IO TLB: mapped [mem 0x70756000-0x74756000] (64MB)
[ 0.819377] Initialise system trusted keyrings
[ 0.819386] Key type blacklist registered
[ 0.819430] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.820603] zbud: loaded
[ 0.821007] integrity: Platform Keyring initialized
[ 0.832135] NET: Registered protocol family 38
[ 0.832138] Key type asymmetric registered
[ 0.832139] Asymmetric key parser 'x509' registered
[ 0.832145] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.832188] io scheduler mq-deadline registered
[ 0.832189] io scheduler kyber registered
[ 0.832216] io scheduler bfq registered
[ 0.832266] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.833111] pcieport 0000:05:00.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.833248] pcieport 0000:05:03.0: enabling device (0000 -> 0003)
[ 0.833350] pcieport 0000:05:03.0: pciehp: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.833577] pcieport 0000:05:04.0: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.833705] pcieport 0000:05:05.0: enabling device (0000 -> 0003)
[ 0.833811] pcieport 0000:05:05.0: pciehp: Slot #5 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.834043] pcieport 0000:05:06.0: pciehp: Slot #6 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.834200] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.834217] efifb: probing for efifb
[ 0.834234] efifb: No BGRT, not showing boot graphics
[ 0.834235] efifb: framebuffer at 0x90000000, using 8100k, total 8100k
[ 0.834236] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.834236] efifb: scrolling: redraw
[ 0.834237] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.834277] fbcon: Deferring console take-over
[ 0.834278] fb0: EFI VGA frame buffer device
[ 0.834285] intel_idle: MWAIT substates: 0x11142120
[ 0.834286] intel_idle: v0.5.1 model 0x45
[ 0.834497] intel_idle: Local APIC timer is reliable in all C-states
[ 0.834619] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.834639] ACPI: Power Button [PWRB]
[ 0.834663] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.834679] ACPI: Sleep Button [SLPB]
[ 0.834700] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.834726] ACPI: Power Button [PWRF]
[ 0.835172] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.836430] Non-volatile memory driver v1.3
[ 0.836456] Linux agpgart interface v0.103
[ 0.836792] ahci 0000:00:1f.2: version 3.0
[ 0.847826] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 0.847829] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 0.848219] scsi host0: ahci
[ 0.848291] ata1: SATA max UDMA/133 abar m2048@0xa082a000 port 0xa082a100 irq 52
[ 0.848435] libphy: Fixed MDIO Bus: probed
[ 0.848562] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.848565] ehci-pci: EHCI PCI platform driver
[ 0.848577] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.848579] ohci-pci: OHCI PCI platform driver
[ 0.848585] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.848724] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.848749] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.849802] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
[ 0.849806] xhci_hcd 0000:00:14.0: cache line size of 256 is not supported
[ 0.849942] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 0.849943] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.849944] usb usb1: Product: xHCI Host Controller
[ 0.849945] usb usb1: Manufacturer: Linux 5.8.15-301.fc33.x86_64 xhci-hcd
[ 0.849946] usb usb1: SerialNumber: 0000:00:14.0
[ 0.850112] hub 1-0:1.0: USB hub found
[ 0.850121] hub 1-0:1.0: 9 ports detected
[ 0.850381] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.850457] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.850459] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.850485] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
[ 0.850486] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.850487] usb usb2: Product: xHCI Host Controller
[ 0.850488] usb usb2: Manufacturer: Linux 5.8.15-301.fc33.x86_64 xhci-hcd
[ 0.850488] usb usb2: SerialNumber: 0000:00:14.0
[ 0.850564] hub 2-0:1.0: USB hub found
[ 0.850569] hub 2-0:1.0: 4 ports detected
[ 0.850715] usbcore: registered new interface driver usbserial_generic
[ 0.850719] usbserial: USB Serial support registered for generic
[ 0.850735] i8042: PNP: No PS/2 controller found.
[ 0.850777] mousedev: PS/2 mouse device common for all mice
[ 0.850907] rtc_cmos 00:02: RTC can wake from S4
[ 0.851090] rtc_cmos 00:02: registered as rtc0
[ 0.851128] rtc_cmos 00:02: setting system clock to 2020-10-19T13:44:21 UTC (1603115061)
[ 0.851129] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.851165] device-mapper: uevent: version 1.0.3
[ 0.851219] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[ 0.851263] intel_pstate: Intel P-state driver initializing
[ 0.851842] hid: raw HID events driver (C) Jiri Kosina
[ 0.851921] usbcore: registered new interface driver usbhid
[ 0.851923] usbhid: USB HID core driver
[ 0.852188] drop_monitor: Initializing network drop monitor service
[ 0.852243] Initializing XFRM netlink socket
[ 0.852328] NET: Registered protocol family 10
[ 0.855510] Segment Routing with IPv6
[ 0.855511] RPL Segment Routing with IPv6
[ 0.855527] mip6: Mobile IPv6
[ 0.855528] NET: Registered protocol family 17
[ 0.855735] microcode: sig=0x40651, pf=0x40, revision=0x26
[ 0.855745] microcode: Microcode Update Driver: v2.2.
[ 0.855749] IPI shorthand broadcast: enabled
[ 0.855753] AVX2 version of gcm_enc/dec engaged.
[ 0.855754] AES CTR mode by8 optimization enabled
[ 0.873370] sched_clock: Marking stable (872099604, 1262473)->(876348967, -2986890)
[ 0.873486] registered taskstats version 1
[ 0.873497] Loading compiled-in X.509 certificates
[ 0.874350] Loaded X.509 cert 'Fedora kernel signing key: 71061a7c4e9b4be18114471ac9aaaf015e062125'
[ 0.874372] zswap: loaded using pool lzo/zbud
[ 0.874480] Key type ._fscrypt registered
[ 0.874481] Key type .fscrypt registered
[ 0.874482] Key type fscrypt-provisioning registered
[ 0.874679] Btrfs loaded, crc32c=crc32c-generic
[ 0.877558] Key type encrypted registered
[ 0.890627] ima: No TPM chip found, activating TPM-bypass!
[ 0.890634] ima: Allocated hash algorithm: sha256
[ 0.890641] ima: No architecture policies found
[ 0.891058] PM: Magic number: 8:515:736
[ 0.891173] RAS: Correctable Errors collector initialized.
[ 1.156218] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.157357] ata1.00: unexpected _GTF length (8)
[ 1.157834] ata1.00: ATA-8: APPLE HDD HTS541010A9E662, JA0AB5D0, max UDMA/133
[ 1.157839] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.159172] ata1.00: unexpected _GTF length (8)
[ 1.159647] ata1.00: configured for UDMA/133
[ 1.160215] scsi 0:0:0:0: Direct-Access ATA APPLE HDD HTS541 B5D0 PQ: 0 ANSI: 5
[ 1.160582] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.160617] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.160619] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.160630] sd 0:0:0:0: [sda] Write Protect is off
[ 1.160632] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.160648] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.172859] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.228024] sda: sda1 sda2 sda3 sda4
[ 1.228757] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.230500] Freeing unused decrypted memory: 2040K
[ 1.231099] Freeing unused kernel image (initmem) memory: 2508K
[ 1.233874] Write protecting the kernel read-only data: 26624k
[ 1.234642] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 1.235079] Freeing unused kernel image (rodata/data gap) memory: 1488K
[ 1.299294] usb 1-1: New USB device found, idVendor=03f0, idProduct=bf2a, bcdDevice= 1.00
[ 1.299297] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.299299] usb 1-1: Product: HP LaserJet MFP M28-M31
[ 1.299300] usb 1-1: Manufacturer: HP
[ 1.299302] usb 1-1: SerialNumber: VNC3R15660
[ 1.330178] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.330183] rodata_test: all tests were successful
[ 1.330185] x86/mm: Checking user space page tables
[ 1.372254] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.372287] Run /init as init process
[ 1.372289] with arguments:
[ 1.372289] /init
[ 1.372289] rhgb
[ 1.372290] with environment:
[ 1.372290] HOME=/
[ 1.372291] TERM=linux
[ 1.372291] BOOT_IMAGE=(hd1,gpt3)/vmlinuz-5.8.15-301.fc33.x86_64
[ 1.415778] usb 1-2: new full-speed USB device number 3 using xhci_hcd
[ 1.543207] usb 1-2: New USB device found, idVendor=05ac, idProduct=0267, bcdDevice= 8.51
[ 1.543212] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.543215] usb 1-2: Product: Magic Keyboard
[ 1.543217] usb 1-2: Manufacturer: Apple Inc.
[ 1.543220] usb 1-2: SerialNumber: F0T850300U1J1YRA9
[ 1.627722] systemd[1]: systemd v246.6-3.fc33 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 1.639904] systemd[1]: Detected architecture x86-64.
[ 1.639907] systemd[1]: Running in initial RAM disk.
[ 1.639967] systemd[1]: Set hostname to <localhost.localdomain>.
[ 1.674801] usb 1-3: new full-speed USB device number 4 using xhci_hcd
[ 1.694090] systemd[1]: /usr/lib/systemd/system/memstrack.service:12: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[ 1.694097] systemd[1]: /usr/lib/systemd/system/memstrack.service:13: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[ 1.698907] systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 1.702422] systemd[1]: /usr/lib/systemd/system/dracut-pre-udev.service:27: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 1.702427] systemd[1]: /usr/lib/systemd/system/dracut-pre-udev.service:28: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[ 1.702639] systemd[1]: /usr/lib/systemd/system/dracut-pre-trigger.service:23: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 1.702643] systemd[1]: /usr/lib/systemd/system/dracut-pre-trigger.service:24: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[ 1.702898] systemd[1]: /usr/lib/systemd/system/dracut-pre-pivot.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 1.702902] systemd[1]: /usr/lib/systemd/system/dracut-pre-pivot.service:31: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[ 1.703782] systemd[1]: /usr/lib/systemd/system/dracut-pre-mount.service:22: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 1.703786] systemd[1]: /usr/lib/systemd/system/dracut-pre-mount.service:23: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[ 1.703983] systemd[1]: /usr/lib/systemd/system/dracut-mount.service:22: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 1.703988] systemd[1]: /usr/lib/systemd/system/dracut-mount.service:23: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[ 1.704152] systemd[1]: /usr/lib/systemd/system/dracut-initqueue.service:24: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 1.704156] systemd[1]: /usr/lib/systemd/system/dracut-initqueue.service:25: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[ 1.704319] systemd[1]: /usr/lib/systemd/system/dracut-cmdline.service:26: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 1.704324] systemd[1]: /usr/lib/systemd/system/dracut-cmdline.service:27: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[ 1.706604] systemd[1]: Queued start job for default target Initrd Default Target.
[ 1.707261] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[ 1.707343] systemd[1]: Reached target Local File Systems.
[ 1.707359] systemd[1]: Reached target Slices.
[ 1.707371] systemd[1]: Reached target Swap.
[ 1.707381] systemd[1]: Reached target Timers.
[ 1.707524] systemd[1]: Listening on Journal Audit Socket.
[ 1.707619] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.707701] systemd[1]: Listening on Journal Socket.
[ 1.707809] systemd[1]: Listening on udev Control Socket.
[ 1.707874] systemd[1]: Listening on udev Kernel Socket.
[ 1.707885] systemd[1]: Reached target Sockets.
[ 1.708505] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 1.709119] systemd[1]: Started Memstrack Anylazing Service.
[ 1.710000] systemd[1]: Started Hardware RNG Entropy Gatherer Daemon.
[ 1.711784] systemd[1]: Starting Journal Service...
[ 1.712860] systemd[1]: Starting Load Kernel Modules...
[ 1.713648] systemd[1]: Starting Setup Virtual Console...
[ 1.714286] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 1.715283] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 1.731959] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 1.743883] systemd[1]: memstrack.service: Succeeded.
[ 1.802529] usb 1-3: New USB device found, idVendor=0a5c, idProduct=4500, bcdDevice= 1.00
[ 1.802531] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.802533] usb 1-3: Product: BRCM20702 Hub
[ 1.802534] usb 1-3: Manufacturer: Apple Inc.
[ 1.803024] hub 1-3:1.0: USB hub found
[ 1.803114] hub 1-3:1.0: 3 ports detected
[ 1.806366] fuse: init (API version 7.31)
[ 1.807557] systemd[1]: Finished Load Kernel Modules.
[ 1.807605] audit: type=1130 audit(1603115062.455:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.808526] systemd[1]: Starting Apply Kernel Variables...
[ 1.818351] systemd[1]: Finished Apply Kernel Variables.
[ 1.818510] audit: type=1130 audit(1603115062.466:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.828536] systemd[1]: Started Journal Service.
[ 1.829844] audit: type=1130 audit(1603115062.476:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.844374] audit: type=1130 audit(1603115062.492:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.851687] audit: type=1130 audit(1603115062.499:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.858765] tsc: Refined TSC clocksource calibration: 2599.999 MHz
[ 1.858770] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a3b2ad7e, max_idle_ns: 440795282337 ns
[ 1.858781] clocksource: Switched to clocksource tsc
[ 1.874442] audit: type=1130 audit(1603115062.520:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline-ask comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.917768] usb 1-4: new low-speed USB device number 5 using xhci_hcd
[ 2.034966] audit: type=1130 audit(1603115062.682:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.048387] usb 1-4: New USB device found, idVendor=05ac, idProduct=8242, bcdDevice= 1.00
[ 2.048389] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.048391] usb 1-4: Product: IR Receiver
[ 2.048392] usb 1-4: Manufacturer: Apple, Inc.
[ 2.081290] audit: type=1130 audit(1603115062.728:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.082232] audit: type=1334 audit(1603115062.729:10): prog-id=6 op=LOAD
[ 2.107769] usb 1-3.1: new full-speed USB device number 6 using xhci_hcd
[ 2.139847] input: Apple, Inc. IR Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:05AC:8242.0004/input/input3
[ 2.186025] usb 1-3.1: New USB device found, idVendor=05ac, idProduct=820a, bcdDevice= 1.00
[ 2.186028] usb 1-3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.187398] input: HID 05ac:820a as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.0/0003:05AC:820A.0005/input/input4
[ 2.192000] appleir 0003:05AC:8242.0004: input,hiddev96,hidraw0: USB HID v1.11 Device [Apple, Inc. IR Receiver] on usb-0000:00:14.0-4/input0
[ 2.243924] hid-generic 0003:05AC:820A.0005: input,hidraw1: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:14.0-3.1/input0
[ 2.298767] usb 1-7: new low-speed USB device number 7 using xhci_hcd
[ 2.427577] tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM957766a) rev 57766001] (PCI Express) MAC address 68:fe:f7:01:38:d2
[ 2.427580] tg3 0000:03:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 2.427582] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.427583] tg3 0000:03:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ 2.430205] usb 1-7: New USB device found, idVendor=1bcf, idProduct=0007, bcdDevice= 0.14
[ 2.430208] usb 1-7: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.430209] usb 1-7: Product: USB Optical Mouse
[ 2.436311] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:1BCF:0007.0006/input/input5
[ 2.436395] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:1BCF:0007.0006/input/input6
[ 2.436466] hid-generic 0003:1BCF:0007.0006: input,hiddev97,hidraw2: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:14.0-7/input0
[ 2.446657] sdhci: Secure Digital Host Controller Interface driver
[ 2.446658] sdhci: Copyright(c) Pierre Ossman
[ 2.490772] usb 1-3.2: new full-speed USB device number 8 using xhci_hcd
[ 2.496231] sdhci-pci 0000:03:00.1: SDHCI controller found [14e4:16bc] (rev 1)
[ 2.513876] mmc0: SDHCI controller on PCI [0000:03:00.1] using ADMA 64-bit
[ 2.570006] usb 1-3.2: New USB device found, idVendor=05ac, idProduct=820b, bcdDevice= 1.00
[ 2.570008] usb 1-3.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.571447] input: HID 05ac:820b as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/1-3.2:1.0/0003:05AC:820B.0007/input/input7
[ 2.571540] hid-generic 0003:05AC:820B.0007: input,hidraw3: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:14.0-3.2/input0
[ 2.573251] tg3 0000:03:00.0 enp3s0f0: renamed from eth0
[ 2.682899] usb 1-8: new high-speed USB device number 9 using xhci_hcd
[ 2.808957] usb 1-8: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[ 2.808960] usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.808961] usb 1-8: Product: USB 2.0 Hub
[ 2.809661] hub 1-8:1.0: USB hub found
[ 2.809716] hub 1-8:1.0: 4 ports detected
[ 2.847707] checking generic (90000000 7e9000) vs hw (a0000000 400000)
[ 2.847710] checking generic (90000000 7e9000) vs hw (90000000 10000000)
[ 2.847711] fb0: switching to inteldrmfb from EFI VGA
[ 2.848470] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 2.856007] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.856025] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.872767] usb 1-3.3: new full-speed USB device number 10 using xhci_hcd
[ 2.900499] [drm] Initialized i915 1.6.0 20200515 for 0000:00:02.0 on minor 0
[ 2.901543] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
[ 2.901909] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 2.952389] usb 1-3.3: New USB device found, idVendor=05ac, idProduct=8289, bcdDevice= 1.50
[ 2.952391] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.952393] usb 1-3.3: Product: Bluetooth USB Host Controller
[ 2.952394] usb 1-3.3: Manufacturer: Apple Inc.
[ 3.015254] fbcon: i915drmfb (fb0) is primary device
[ 3.015255] fbcon: Deferring console take-over
[ 3.015259] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 3.023982] apple 0003:05AC:0267.0001: hiddev98,hidraw4: USB HID v1.10 Device [Apple Inc. Magic Keyboard] on usb-0000:00:14.0-2/input0
[ 3.024266] input: Apple Inc. Magic Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:05AC:0267.0002/input/input9
[ 3.076284] apple 0003:05AC:0267.0002: input,hiddev99,hidraw5: USB HID v1.10 Keyboard [Apple Inc. Magic Keyboard] on usb-0000:00:14.0-2/input1
[ 3.076929] apple 0003:05AC:0267.0003: hiddev100,hidraw6: USB HID v1.10 Device [Apple Inc. Magic Keyboard] on usb-0000:00:14.0-2/input2
[ 15.250492] BTRFS: device label fedora_localhost-live devid 1 transid 7619 /dev/dm-0 scanned by systemd-udevd (782)
[ 15.266555] kauditd_printk_skb: 18 callbacks suppressed
[ 15.266556] audit: type=1130 audit(1603115075.913:29): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 15.266892] audit: type=1130 audit(1603115075.914:30): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-cryptsetup@luks\x2dd20a639d\x2d8ec4\x2d4b49\x2d8a44\x2d9a61958f8bb6 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 15.287156] audit: type=1130 audit(1603115075.934:31): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 15.298994] BTRFS info (device dm-0): disk space caching is enabled
[ 15.298995] BTRFS info (device dm-0): has skinny extents
[ 15.533997] audit: type=1334 audit(1603115076.181:32): prog-id=11 op=UNLOAD
[ 15.533999] audit: type=1334 audit(1603115076.181:33): prog-id=10 op=UNLOAD
[ 15.534008] audit: type=1334 audit(1603115076.181:34): prog-id=9 op=UNLOAD
[ 15.535396] audit: type=1334 audit(1603115076.182:35): prog-id=14 op=UNLOAD
[ 15.535402] audit: type=1334 audit(1603115076.182:36): prog-id=13 op=UNLOAD
[ 15.535503] audit: type=1334 audit(1603115076.182:37): prog-id=12 op=UNLOAD
[ 15.632890] audit: type=1334 audit(1603115076.280:38): prog-id=15 op=LOAD
[ 18.441681] SELinux: Permission watch in class filesystem not defined in policy.
[ 18.441686] SELinux: Permission watch in class file not defined in policy.
[ 18.441686] SELinux: Permission watch_mount in class file not defined in policy.
[ 18.441687] SELinux: Permission watch_sb in class file not defined in policy.
[ 18.441688] SELinux: Permission watch_with_perm in class file not defined in policy.
[ 18.441688] SELinux: Permission watch_reads in class file not defined in policy.
[ 18.441691] SELinux: Permission watch in class dir not defined in policy.
[ 18.441691] SELinux: Permission watch_mount in class dir not defined in policy.
[ 18.441692] SELinux: Permission watch_sb in class dir not defined in policy.
[ 18.441692] SELinux: Permission watch_with_perm in class dir not defined in policy.
[ 18.441693] SELinux: Permission watch_reads in class dir not defined in policy.
[ 18.441697] SELinux: Permission watch in class lnk_file not defined in policy.
[ 18.441697] SELinux: Permission watch_mount in class lnk_file not defined in policy.
[ 18.441698] SELinux: Permission watch_sb in class lnk_file not defined in policy.
[ 18.441698] SELinux: Permission watch_with_perm in class lnk_file not defined in policy.
[ 18.441699] SELinux: Permission watch_reads in class lnk_file not defined in policy.
[ 18.441701] SELinux: Permission watch in class chr_file not defined in policy.
[ 18.441701] SELinux: Permission watch_mount in class chr_file not defined in policy.
[ 18.441702] SELinux: Permission watch_sb in class chr_file not defined in policy.
[ 18.441702] SELinux: Permission watch_with_perm in class chr_file not defined in policy.
[ 18.441703] SELinux: Permission watch_reads in class chr_file not defined in policy.
[ 18.441705] SELinux: Permission watch in class blk_file not defined in policy.
[ 18.441705] SELinux: Permission watch_mount in class blk_file not defined in policy.
[ 18.441705] SELinux: Permission watch_sb in class blk_file not defined in policy.
[ 18.441706] SELinux: Permission watch_with_perm in class blk_file not defined in policy.
[ 18.441706] SELinux: Permission watch_reads in class blk_file not defined in policy.
[ 18.441708] SELinux: Permission watch in class sock_file not defined in policy.
[ 18.441709] SELinux: Permission watch_mount in class sock_file not defined in policy.
[ 18.441709] SELinux: Permission watch_sb in class sock_file not defined in policy.
[ 18.441710] SELinux: Permission watch_with_perm in class sock_file not defined in policy.
[ 18.441710] SELinux: Permission watch_reads in class sock_file not defined in policy.
[ 18.441712] SELinux: Permission watch in class fifo_file not defined in policy.
[ 18.441713] SELinux: Permission watch_mount in class fifo_file not defined in policy.
[ 18.441713] SELinux: Permission watch_sb in class fifo_file not defined in policy.
[ 18.441713] SELinux: Permission watch_with_perm in class fifo_file not defined in policy.
[ 18.441714] SELinux: Permission watch_reads in class fifo_file not defined in policy.
[ 18.441781] SELinux: Permission perfmon in class capability2 not defined in policy.
[ 18.441782] SELinux: Permission bpf in class capability2 not defined in policy.
[ 18.441790] SELinux: Permission perfmon in class cap2_userns not defined in policy.
[ 18.441790] SELinux: Permission bpf in class cap2_userns not defined in policy.
[ 18.441845] SELinux: Class perf_event not defined in policy.
[ 18.441845] SELinux: Class lockdown not defined in policy.
[ 18.441846] SELinux: the above unknown classes and permissions will be allowed
[ 18.441850] SELinux: policy capability network_peer_controls=1
[ 18.441851] SELinux: policy capability open_perms=1
[ 18.441851] SELinux: policy capability extended_socket_class=1
[ 18.441851] SELinux: policy capability always_check_network=0
[ 18.441852] SELinux: policy capability cgroup_seclabel=1
[ 18.441852] SELinux: policy capability nnp_nosuid_transition=1
[ 18.441853] SELinux: policy capability genfs_seclabel_symlinks=0
[ 18.465834] systemd[1]: Successfully loaded SELinux policy in 304.350ms.
[ 18.850849] systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 28.943ms.
[ 18.900908] systemd[1]: systemd v246.6-3.fc33 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 18.913075] systemd[1]: Detected architecture x86-64.
[ 18.920911] systemd[1]: Set hostname to <pupe>.
[ 19.450439] zram_generator::generator[900]: Creating dev-zram0.swap for /dev/zram0 (3915MB)
[ 19.950624] zram: Added device: zram0
[ 22.435829] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-udev.service:27: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 22.435835] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-udev.service:28: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[ 22.436121] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-trigger.service:23: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 22.436127] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-trigger.service:24: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[ 22.436434] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-pivot.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 22.436439] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-pivot.service:31: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[ 22.461084] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-mount.service:22: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 22.461089] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-mount.service:23: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[ 22.461307] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-mount.service:22: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 22.461311] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-mount.service:23: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[ 22.461495] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-initqueue.service:24: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 22.461499] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-initqueue.service:25: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[ 22.461676] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-cmdline.service:26: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 22.461681] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-cmdline.service:27: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[ 22.479069] systemd[1]: /usr/lib/systemd/system/alsa-restore.service:15: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 22.517356] systemd[1]: /usr/lib/systemd/system/mcelog.service:8: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 22.533879] systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 22.596399] kauditd_printk_skb: 39 callbacks suppressed
[ 22.596399] audit: type=1334 audit(1603115083.243:78): prog-id=23 op=LOAD
[ 22.596615] audit: type=1334 audit(1603115083.243:79): prog-id=24 op=LOAD
[ 22.596668] audit: type=1334 audit(1603115083.243:80): prog-id=25 op=LOAD
[ 22.597186] audit: type=1131 audit(1603115083.244:81): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 22.597410] systemd[1]: initrd-switch-root.service: Succeeded.
[ 22.597551] systemd[1]: Stopped Switch Root.
[ 22.597782] audit: type=1130 audit(1603115083.244:82): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 22.597811] audit: type=1131 audit(1603115083.245:83): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 22.598048] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[ 22.598283] systemd[1]: Created slice Virtual Machine and Container Slice.
[ 22.598488] systemd[1]: Created slice system-getty.slice.
[ 22.598662] systemd[1]: Created slice system-modprobe.slice.
[ 22.598850] systemd[1]: Created slice system-swap\x2dcreate.slice.
[ 22.599025] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 22.599239] systemd[1]: Created slice User and Session Slice.
[ 22.599271] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[ 22.599385] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 22.599806] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 22.599850] systemd[1]: Reached target Block Device Preparation for /dev/mapper/luks-d20a639d-8ec4-4b49-8a44-9a61958f8bb6.
[ 22.599874] systemd[1]: Reached target Local Encrypted Volumes.
[ 22.599895] systemd[1]: Reached target Login Prompts.
[ 22.599923] systemd[1]: Stopped target Switch Root.
[ 22.599945] systemd[1]: Stopped target Initrd File Systems.
[ 22.599962] systemd[1]: Stopped target Initrd Root File System.
[ 22.600035] systemd[1]: Reached target Slices.
[ 22.600482] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 22.601326] systemd[1]: Listening on LVM2 poll daemon socket.
[ 22.601478] systemd[1]: Listening on multipathd control socket.
[ 22.602638] systemd[1]: Listening on Process Core Dump Socket.
[ 22.602785] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 22.604976] audit: type=1334 audit(1603115083.252:84): prog-id=23 op=UNLOAD
[ 22.614489] systemd[1]: Listening on udev Control Socket.
[ 22.614859] systemd[1]: Listening on udev Kernel Socket.
[ 22.626392] systemd[1]: Listening on User Database Manager Socket.
[ 22.627363] systemd[1]: Mounting Huge Pages File System...
[ 22.628319] systemd[1]: Mounting POSIX Message Queue File System...
[ 22.629220] systemd[1]: Mounting Kernel Debug File System...
[ 22.629437] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 22.630246] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 22.631082] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 22.631216] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[ 22.632174] systemd[1]: Starting Preprocess NFS configuration convertion...
[ 22.632502] systemd[1]: plymouth-switch-root.service: Succeeded.
[ 22.632770] systemd[1]: Stopped Plymouth switch root service.
[ 22.632872] audit: type=1131 audit(1603115083.280:85): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 22.647207] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 22.647411] systemd[1]: systemd-fsck-root.service: Succeeded.
[ 22.647609] systemd[1]: Stopped File System Check on Root Device.
[ 22.647680] audit: type=1131 audit(1603115083.294:86): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 22.647786] systemd[1]: Stopped Journal Service.
[ 22.647840] audit: type=1130 audit(1603115083.295:87): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 22.649380] systemd[1]: Starting Journal Service...
[ 22.650411] systemd[1]: Starting Load Kernel Modules...
[ 22.651572] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 22.651691] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[ 22.652700] systemd[1]: Starting Coldplug All udev Devices...
[ 22.654124] systemd[1]: sysroot.mount: Succeeded.
[ 22.654990] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 22.672635] systemd[1]: nfs-convert.service: Succeeded.
[ 22.672967] systemd[1]: Finished Preprocess NFS configuration convertion.
[ 22.716910] systemd[1]: Finished Load Kernel Modules.
[ 22.718556] systemd[1]: Mounting FUSE Control File System...
[ 22.719539] systemd[1]: Starting Apply Kernel Variables...
[ 22.780099] BTRFS info (device dm-0): disk space caching is enabled
[ 22.782004] systemd[1]: Mounted Huge Pages File System.
[ 22.782188] systemd[1]: Mounted POSIX Message Queue File System.
[ 22.782332] systemd[1]: Mounted Kernel Debug File System.
[ 22.782647] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 22.782899] systemd[1]: Mounted FUSE Control File System.
[ 22.783050] systemd[1]: Condition check resulted in OSTree Remount OS/ Bind Mounts being skipped.
[ 22.783095] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[ 22.818844] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 22.819713] systemd[1]: Starting Load/Save Random Seed...
[ 22.819857] systemd[1]: Condition check resulted in Create System Users being skipped.
[ 22.820637] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 22.821019] systemd[1]: Started Journal Service.
[ 28.457177] kauditd_printk_skb: 20 callbacks suppressed
[ 28.457178] audit: type=1130 audit(1603115089.104:108): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 29.336392] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 29.469428] zram0: detected capacity change from 0 to 4105175040
[ 30.033037] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 30.033038] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 30.033039] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 30.033039] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 30.033039] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 30.192383] bcma-pci-bridge 0000:02:00.0: bus0: Found chip with id 0x4360, rev 0x03 and package 0x00
[ 30.192429] bcma-pci-bridge 0000:02:00.0: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2B, class 0x0)
[ 30.192452] bcma-pci-bridge 0000:02:00.0: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x2A, class 0x0)
[ 30.192495] bcma-pci-bridge 0000:02:00.0: bus0: Core 2 found: ARM CR4 (manuf 0x4BF, id 0x83E, rev 0x02, class 0x0)
[ 30.192542] bcma-pci-bridge 0000:02:00.0: bus0: Core 3 found: PCIe Gen2 (manuf 0x4BF, id 0x83C, rev 0x01, class 0x0)
[ 30.192565] bcma-pci-bridge 0000:02:00.0: bus0: Core 4 found: USB 2.0 Device (manuf 0x4BF, id 0x81A, rev 0x11, class 0x0)
[ 30.238295] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 30.238784] i2c i2c-8: 2/2 memory slots populated (from DMI)
[ 30.248428] bcma: Unsupported SPROM revision: 11
[ 30.248431] bcma-pci-bridge 0000:02:00.0: bus0: Invalid SPROM read from the PCIe card, trying to use fallback SPROM
[ 30.248433] bcma-pci-bridge 0000:02:00.0: bus0: Using fallback SPROM failed (err -2)
[ 30.248434] bcma-pci-bridge 0000:02:00.0: bus0: No SPROM available
[ 30.250977] bcma-pci-bridge 0000:02:00.0: bus0: Bus registered
[ 30.527179] audit: type=1130 audit(1603115091.174:109): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=swap-create@zram0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 30.551274] iTCO_vendor_support: vendor-support=0
[ 30.674786] applesmc: key=623 fan=1 temp=63 index=60 acc=0 lux=0 kbd=0
[ 30.674941] applesmc applesmc.768: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 30.848928] usbcore: registered new device driver apple-mfi-fastcharge
[ 30.850789] Adding 4008956k swap on /dev/zram0. Priority:100 extents:1 across:4008956k SSFS
[ 30.886371] apple 0003:05AC:0267.0008: hiddev98,hidraw4: USB HID v1.10 Device [Apple Inc. Magic Keyboard] on usb-0000:00:14.0-2/input0
[ 30.887369] input: Apple Inc. Magic Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:05AC:0267.0009/input/input11
[ 30.939049] apple 0003:05AC:0267.0009: input,hiddev99,hidraw5: USB HID v1.10 Keyboard [Apple Inc. Magic Keyboard] on usb-0000:00:14.0-2/input1
[ 30.939791] apple 0003:05AC:0267.000A: hiddev100,hidraw6: USB HID v1.10 Device [Apple Inc. Magic Keyboard] on usb-0000:00:14.0-2/input2
[ 30.973193] apple 0003:05AC:0267.000B: hiddev98,hidraw4: USB HID v1.10 Device [Apple Inc. Magic Keyboard] on usb-0000:00:14.0-2/input0
[ 30.974224] input: Apple Inc. Magic Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:05AC:0267.000C/input/input12
[ 31.002059] input: Apple, Inc. IR Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:05AC:8242.000D/input/input13
[ 31.006648] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 31.006701] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 31.050988] apple 0003:05AC:0267.000C: input,hiddev96,hidraw0: USB HID v1.10 Keyboard [Apple Inc. Magic Keyboard] on usb-0000:00:14.0-2/input1
[ 31.051670] apple 0003:05AC:0267.000E: hiddev99,hidraw5: USB HID v1.10 Device [Apple Inc. Magic Keyboard] on usb-0000:00:14.0-2/input2
[ 31.102919] appleir 0003:05AC:8242.000D: input,hiddev100,hidraw6: USB HID v1.11 Device [Apple, Inc. IR Receiver] on usb-0000:00:14.0-4/input0
[ 31.115695] input: Apple, Inc. IR Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:05AC:8242.000F/input/input14
[ 31.151707] input: HID 05ac:820a as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.0/0003:05AC:820A.0010/input/input15
[ 31.201890] appleir 0003:05AC:8242.000F: input,hiddev100,hidraw1: USB HID v1.11 Device [Apple, Inc. IR Receiver] on usb-0000:00:14.0-4/input0
[ 31.253916] hid-generic 0003:05AC:820A.0010: input,hidraw6: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:14.0-3.1/input0
[ 31.291650] input: HID 05ac:820a as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.0/0003:05AC:820A.0011/input/input16
[ 31.306506] input: HID 05ac:820b as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/1-3.2:1.0/0003:05AC:820B.0012/input/input17
[ 31.356935] hid-generic 0003:05AC:820A.0011: input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:14.0-3.1/input0
[ 31.357007] hid-generic 0003:05AC:820B.0012: input,hidraw6: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:14.0-3.2/input0
[ 31.371666] input: HID 05ac:820b as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/1-3.2:1.0/0003:05AC:820B.0013/input/input18
[ 31.371782] hid-generic 0003:05AC:820B.0013: input,hidraw6: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:14.0-3.2/input0
[ 31.599478] intel_rapl_common: Found RAPL domain package
[ 31.599479] intel_rapl_common: Found RAPL domain core
[ 31.599480] intel_rapl_common: Found RAPL domain uncore
[ 31.599481] intel_rapl_common: Found RAPL domain dram
[ 32.199485] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 32.200645] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 32.320558] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 32.320560] cfg80211: failed to load regulatory.db
[ 32.418125] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 33.149013] snd_hda_codec_cirrus hdaudioC1D0: autoconfig for CS4208: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:speaker
[ 33.149015] snd_hda_codec_cirrus hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 33.149017] snd_hda_codec_cirrus hdaudioC1D0: hp_outs=1 (0x10/0x0/0x0/0x0/0x0)
[ 33.149018] snd_hda_codec_cirrus hdaudioC1D0: mono: mono_out=0x0
[ 33.149019] snd_hda_codec_cirrus hdaudioC1D0: dig-out=0x21/0x0
[ 33.149020] snd_hda_codec_cirrus hdaudioC1D0: inputs:
[ 33.149021] snd_hda_codec_cirrus hdaudioC1D0: Mic=0x18
[ 33.156311] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[ 33.156870] b43-phy0: Broadcom 4360 WLAN found (core revision 42)
[ 33.157290] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 12, Type 11 (AC), Revision 1)
[ 33.157299] b43: probe of bcma0:1 failed with error -95
[ 33.157321] Broadcom 43xx driver loaded [ Features: PNLS ]
[ 33.168127] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[ 33.168176] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
[ 33.168212] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
[ 33.168257] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
[ 33.168294] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input24
[ 33.503684] audit: type=1130 audit(1603115094.150:110): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 33.780704] BTRFS info (device dm-0): device fsid 92c1c790-6644-4879-b6ef-68e85c997ace devid 1 moved old:/dev/mapper/luks-d20a639d-8ec4-4b49-8a44-9a61958f8bb6 new:/dev/dm-0
[ 33.782052] BTRFS info (device dm-0): device fsid 92c1c790-6644-4879-b6ef-68e85c997ace devid 1 moved old:/dev/dm-0 new:/dev/mapper/luks-d20a639d-8ec4-4b49-8a44-9a61958f8bb6
[ 33.862601] Bluetooth: Core ver 2.22
[ 33.862619] NET: Registered protocol family 31
[ 33.862620] Bluetooth: HCI device and connection manager initialized
[ 33.862623] Bluetooth: HCI socket layer initialized
[ 33.862625] Bluetooth: L2CAP socket layer initialized
[ 33.862628] Bluetooth: SCO socket layer initialized
[ 33.958259] audit: type=1130 audit(1603115094.605:111): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 33.962603] usbcore: registered new interface driver btusb
[ 33.998712] audit: type=1130 audit(1603115094.645:112): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 34.002637] usb 1-3.1: USB disconnect, device number 6
[ 34.075596] Bluetooth: hci0: BCM: chip id 73 build 1127
[ 34.076524] Bluetooth: hci0: BCM: product 05ac:8289
[ 34.077545] Bluetooth: hci0: BCM: features 0x07
[ 34.093576] Bluetooth: hci0: pupe
[ 34.147022] usb 1-3.2: USB disconnect, device number 8
[ 36.755229] WARNING! power/level is deprecated; use power/control instead
[ 36.767870] usblp 1-1:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0xBF2A
[ 36.767899] usbcore: registered new interface driver usblp
[ 36.774616] audit: type=1130 audit(1603115097.421:113): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 36.837591] loop: module loaded
[ 37.286478] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 37.629019] audit: type=1130 audit(1603115098.276:114): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-8f4671e6\x2dc68a\x2d3a6a\x2da886\x2dad14aa4c9c86 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 37.955500] audit: type=1130 audit(1603115098.602:115): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-171a88fe\x2dce2f\x2d4117\x2d95ab\x2d6cf8285f7cfc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 38.031173] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 38.168396] audit: type=1130 audit(1603115098.815:116): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 38.272121] audit: type=1130 audit(1603115098.919:117): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 38.380483] audit: type=1130 audit(1603115099.027:118): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 38.560678] audit: type=1130 audit(1603115099.207:119): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 38.577600] audit: type=1334 audit(1603115099.224:120): prog-id=32 op=LOAD
[ 38.765083] audit: type=1305 audit(1603115099.412:121): op=set audit_enabled=1 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
[ 38.765086] audit: type=1305 audit(1603115099.412:122): op=set audit_pid=1099 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
[ 38.778995] RPC: Registered named UNIX socket transport module.
[ 38.778996] RPC: Registered udp transport module.
[ 38.778997] RPC: Registered tcp transport module.
[ 38.778997] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 41.975269] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 41.975270] Bluetooth: BNEP filters: protocol multicast
[ 41.975273] Bluetooth: BNEP socket layer initialized
[ 53.625395] usblp0: removed
[ 53.626982] usblp 1-1:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0xBF2A
[ 53.829181] tg3 0000:03:00.0 enp3s0f0: Link is up at 1000 Mbps, full duplex
[ 53.829188] tg3 0000:03:00.0 enp3s0f0: Flow control is off for TX and off for RX
[ 53.829189] tg3 0000:03:00.0 enp3s0f0: EEE is enabled
[ 53.829223] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0f0: link becomes ready
[ 58.447709] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 58.479053] tun: Universal TUN/TAP device driver, 1.6
[ 58.480691] virbr0: port 1(virbr0-nic) entered blocking state
[ 58.480693] virbr0: port 1(virbr0-nic) entered disabled state
[ 58.480744] device virbr0-nic entered promiscuous mode
[ 59.061198] virbr0: port 1(virbr0-nic) entered blocking state
[ 59.061201] virbr0: port 1(virbr0-nic) entered listening state
[ 59.269485] virbr0: port 1(virbr0-nic) entered disabled state
[ 67.120625] rfkill: input handler disabled
[ 106.975267] rfkill: input handler enabled
[ 108.613992] Bluetooth: RFCOMM TTY layer initialized
[ 108.614001] Bluetooth: RFCOMM socket layer initialized
[ 108.614050] Bluetooth: RFCOMM ver 1.11
[ 113.528206] rfkill: input handler disabled
[ 219.807980] usblp0: removed
[ 374.394541] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
[ 5460.650862] zram_generator::generator[6719]: Creating dev-zram0.swap for /dev/zram0 (3915MB)
[ 5544.559548] lp: driver loaded but no devices found
[12599.719583] usb 1-8.3: new high-speed USB device number 11 using xhci_hcd
[12599.908802] usb 1-8.3: New USB device found, idVendor=1058, idProduct=0704, bcdDevice= 1.05
[12599.908805] usb 1-8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12599.908806] usb 1-8.3: Product: External HDD
[12599.908807] usb 1-8.3: Manufacturer: Western Digital
[12599.908808] usb 1-8.3: SerialNumber: 5758455830384B324A313232
[12600.058441] usb-storage 1-8.3:1.0: USB Mass Storage device detected
[12600.058521] usb-storage 1-8.3:1.0: Quirks match for vid 1058 pid 0704: 8000
[12600.058539] scsi host1: usb-storage 1-8.3:1.0
[12600.058624] usbcore: registered new interface driver usb-storage
[12600.067215] usbcore: registered new interface driver uas
[12601.064321] scsi 1:0:0:0: Direct-Access WD 3200BMV External 1.05 PQ: 0 ANSI: 4
[12601.065257] sd 1:0:0:0: Attached scsi generic sg1 type 0
[12601.065573] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[12601.065986] sd 1:0:0:0: [sdb] Write Protect is off
[12601.065990] sd 1:0:0:0: [sdb] Mode Sense: 21 00 00 00
[12601.066334] sd 1:0:0:0: [sdb] No Caching mode page found
[12601.066343] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[12601.121987] sdb: sdb1
[12601.123288] sd 1:0:0:0: [sdb] Attached SCSI disk
[12601.919604] sd 1:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
[12601.919607] sd 1:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
[12601.919609] blk_update_request: I/O error, dev sdb, sector 4096 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[12601.919663] usb 1-8.3: USB disconnect, device number 11
[12601.923372] scsi 1:0:0:0: rejecting I/O to dead device
[12601.923379] blk_update_request: I/O error, dev sdb, sector 4096 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12601.923383] Buffer I/O error on dev sdb, logical block 512, async page read
[12606.679210] usb 1-8.3: new high-speed USB device number 12 using xhci_hcd
[12606.868533] usb 1-8.3: New USB device found, idVendor=1058, idProduct=0704, bcdDevice= 1.05
[12606.868539] usb 1-8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12606.868542] usb 1-8.3: Product: External HDD
[12606.868544] usb 1-8.3: Manufacturer: Western Digital
[12606.868547] usb 1-8.3: SerialNumber: 5758455830384B324A313232
[12606.869797] usb-storage 1-8.3:1.0: USB Mass Storage device detected
[12606.869909] usb-storage 1-8.3:1.0: Quirks match for vid 1058 pid 0704: 8000
[12606.869954] scsi host1: usb-storage 1-8.3:1.0
[12607.911917] scsi 1:0:0:0: Direct-Access WD 3200BMV External 1.05 PQ: 0 ANSI: 4
[12607.912699] sd 1:0:0:0: Attached scsi generic sg1 type 0
[12607.912929] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[12607.913295] sd 1:0:0:0: [sdb] Write Protect is off
[12607.913299] sd 1:0:0:0: [sdb] Mode Sense: 21 00 00 00
[12607.913634] sd 1:0:0:0: [sdb] No Caching mode page found
[12607.913637] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[12607.959173] sdb: sdb1
[12607.960430] sd 1:0:0:0: [sdb] Attached SCSI disk
[12608.727277] sd 1:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
[12608.727280] sd 1:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 08 00 00 00 08 00
[12608.727282] blk_update_request: I/O error, dev sdb, sector 2048 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[12608.727335] usb 1-8.3: USB disconnect, device number 12
[12608.731013] scsi 1:0:0:0: rejecting I/O to dead device
[12608.731016] blk_update_request: I/O error, dev sdb, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12608.731019] Buffer I/O error on dev sdb, logical block 256, async page read
[12618.694561] usb 1-8.3: new high-speed USB device number 13 using xhci_hcd
[12618.883685] usb 1-8.3: New USB device found, idVendor=1058, idProduct=0704, bcdDevice= 1.05
[12618.883687] usb 1-8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12618.883689] usb 1-8.3: Product: External HDD
[12618.883690] usb 1-8.3: Manufacturer: Western Digital
[12618.883692] usb 1-8.3: SerialNumber: 5758455830384B324A313232
[12618.884792] usb-storage 1-8.3:1.0: USB Mass Storage device detected
[12618.884901] usb-storage 1-8.3:1.0: Quirks match for vid 1058 pid 0704: 8000
[12618.884943] scsi host1: usb-storage 1-8.3:1.0
[12619.942979] scsi 1:0:0:0: Direct-Access WD 3200BMV External 1.05 PQ: 0 ANSI: 4
[12619.943710] sd 1:0:0:0: Attached scsi generic sg1 type 0
[12619.944930] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[12619.945265] sd 1:0:0:0: [sdb] Write Protect is off
[12619.945267] sd 1:0:0:0: [sdb] Mode Sense: 21 00 00 00
[12619.945598] sd 1:0:0:0: [sdb] No Caching mode page found
[12619.945599] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[12619.996747] sdb: sdb1
[12619.998010] sd 1:0:0:0: [sdb] Attached SCSI disk
[12620.758686] sd 1:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
[12620.758688] sd 1:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 08 00 00 00 08 00
[12620.758691] blk_update_request: I/O error, dev sdb, sector 2048 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[12620.758730] usb 1-8.3: USB disconnect, device number 13
[12620.762431] scsi 1:0:0:0: rejecting I/O to dead device
[12620.762435] blk_update_request: I/O error, dev sdb, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12620.762437] Buffer I/O error on dev sdb, logical block 256, async page read
[12625.519224] usb 1-8.3: new high-speed USB device number 14 using xhci_hcd
[12625.715176] usb 1-8.3: New USB device found, idVendor=1058, idProduct=0704, bcdDevice= 1.05
[12625.715181] usb 1-8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12625.715184] usb 1-8.3: Product: External HDD
[12625.715186] usb 1-8.3: Manufacturer: Western Digital
[12625.715188] usb 1-8.3: SerialNumber: 5758455830384B324A313232
[12625.719296] usb-storage 1-8.3:1.0: USB Mass Storage device detected
[12625.719861] usb-storage 1-8.3:1.0: Quirks match for vid 1058 pid 0704: 8000
[12625.719888] scsi host1: usb-storage 1-8.3:1.0
[12626.726787] scsi 1:0:0:0: Direct-Access WD 3200BMV External 1.05 PQ: 0 ANSI: 4
[12626.727345] sd 1:0:0:0: Attached scsi generic sg1 type 0
[12626.728390] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[12626.728756] sd 1:0:0:0: [sdb] Write Protect is off
[12626.728762] sd 1:0:0:0: [sdb] Mode Sense: 21 00 00 00
[12626.729171] sd 1:0:0:0: [sdb] No Caching mode page found
[12626.729173] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[12626.784211] sdb: sdb1
[12626.785556] sd 1:0:0:0: [sdb] Attached SCSI disk
[12627.470223] sd 1:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
[12627.470225] sd 1:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 25 42 ea 00 00 00 08 00
[12627.470227] blk_update_request: I/O error, dev sdb, sector 625142272 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[12627.470287] usb 1-8.3: USB disconnect, device number 14
[12627.474111] scsi 1:0:0:0: rejecting I/O to dead device
[12627.474117] blk_update_request: I/O error, dev sdb, sector 625142272 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12627.474121] Buffer I/O error on dev sdb, logical block 78142784, async page read
[12632.221948] usb 1-8.3: new high-speed USB device number 15 using xhci_hcd
[12632.410828] usb 1-8.3: New USB device found, idVendor=1058, idProduct=0704, bcdDevice= 1.05
[12632.410831] usb 1-8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12632.410833] usb 1-8.3: Product: External HDD
[12632.410835] usb 1-8.3: Manufacturer: Western Digital
[12632.410837] usb 1-8.3: SerialNumber: 5758455830384B324A313232
[12632.414903] usb-storage 1-8.3:1.0: USB Mass Storage device detected
[12632.414964] usb-storage 1-8.3:1.0: Quirks match for vid 1058 pid 0704: 8000
[12632.414991] scsi host1: usb-storage 1-8.3:1.0
[12633.446356] scsi 1:0:0:0: Direct-Access WD 3200BMV External 1.05 PQ: 0 ANSI: 4
[12633.446806] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[12633.447096] sd 1:0:0:0: Attached scsi generic sg1 type 0
[12633.447249] sd 1:0:0:0: [sdb] Write Protect is off
[12633.447253] sd 1:0:0:0: [sdb] Mode Sense: 21 00 00 00
[12633.447574] sd 1:0:0:0: [sdb] No Caching mode page found
[12633.447576] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[12633.495600] sdb: sdb1
[12633.496763] sd 1:0:0:0: [sdb] Attached SCSI disk
[12634.246158] sd 1:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
[12634.246161] sd 1:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 08 00 00 00 08 00
[12634.246163] blk_update_request: I/O error, dev sdb, sector 2048 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[12634.246224] usb 1-8.3: USB disconnect, device number 15
[12634.249778] scsi 1:0:0:0: rejecting I/O to dead device
[12634.249786] blk_update_request: I/O error, dev sdb, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12634.249790] Buffer I/O error on dev sdb, logical block 256, async page read
[12638.997550] usb 1-8.3: new high-speed USB device number 16 using xhci_hcd
[12639.186421] usb 1-8.3: New USB device found, idVendor=1058, idProduct=0704, bcdDevice= 1.05
[12639.186424] usb 1-8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12639.186425] usb 1-8.3: Product: External HDD
[12639.186426] usb 1-8.3: Manufacturer: Western Digital
[12639.186427] usb 1-8.3: SerialNumber: 5758455830384B324A313232
[12639.187534] usb-storage 1-8.3:1.0: USB Mass Storage device detected
[12639.190548] usb-storage 1-8.3:1.0: Quirks match for vid 1058 pid 0704: 8000
[12639.190600] scsi host1: usb-storage 1-8.3:1.0
[12640.229978] scsi 1:0:0:0: Direct-Access WD 3200BMV External 1.05 PQ: 0 ANSI: 4
[12640.230276] sd 1:0:0:0: Attached scsi generic sg1 type 0
[12640.231228] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[12640.231554] sd 1:0:0:0: [sdb] Write Protect is off
[12640.231557] sd 1:0:0:0: [sdb] Mode Sense: 21 00 00 00
[12640.231878] sd 1:0:0:0: [sdb] No Caching mode page found
[12640.231879] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[12640.291242] sdb: sdb1
[12640.292821] sd 1:0:0:0: [sdb] Attached SCSI disk
[12641.069609] sd 1:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
[12641.069612] sd 1:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 08 00 00 00 08 00
[12641.069614] blk_update_request: I/O error, dev sdb, sector 2048 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[12641.069706] usb 1-8.3: USB disconnect, device number 16
[12641.075439] scsi 1:0:0:0: rejecting I/O to dead device
[12641.075444] blk_update_request: I/O error, dev sdb, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12641.075447] Buffer I/O error on dev sdb, logical block 256, async page read
[12645.821288] usb 1-8.3: new high-speed USB device number 17 using xhci_hcd
[12646.010791] usb 1-8.3: New USB device found, idVendor=1058, idProduct=0704, bcdDevice= 1.05
[12646.010794] usb 1-8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12646.010796] usb 1-8.3: Product: External HDD
[12646.010798] usb 1-8.3: Manufacturer: Western Digital
[12646.010799] usb 1-8.3: SerialNumber: 5758455830384B324A313232
[12646.011952] usb-storage 1-8.3:1.0: USB Mass Storage device detected
[12646.012072] usb-storage 1-8.3:1.0: Quirks match for vid 1058 pid 0704: 8000
[12646.012120] scsi host1: usb-storage 1-8.3:1.0
[12647.013565] scsi 1:0:0:0: Direct-Access WD 3200BMV External 1.05 PQ: 0 ANSI: 4
[12647.013862] sd 1:0:0:0: Attached scsi generic sg1 type 0
[12647.014367] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[12647.014712] sd 1:0:0:0: [sdb] Write Protect is off
[12647.014714] sd 1:0:0:0: [sdb] Mode Sense: 21 00 00 00
[12647.015055] sd 1:0:0:0: [sdb] No Caching mode page found
[12647.015057] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[12647.065778] sdb: sdb1
[12647.067062] sd 1:0:0:0: [sdb] Attached SCSI disk
[12647.749492] sd 1:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
[12647.749495] sd 1:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 25 42 ea 00 00 00 08 00
[12647.749497] blk_update_request: I/O error, dev sdb, sector 625142272 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[12647.749569] usb 1-8.3: USB disconnect, device number 17
[12647.754124] scsi 1:0:0:0: rejecting I/O to dead device
[12647.754130] blk_update_request: I/O error, dev sdb, sector 625142272 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12647.754133] Buffer I/O error on dev sdb, logical block 78142784, async page read
[12652.501009] usb 1-8.3: new high-speed USB device number 18 using xhci_hcd
[12652.689798] usb 1-8.3: New USB device found, idVendor=1058, idProduct=0704, bcdDevice= 1.05
[12652.689802] usb 1-8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12652.689804] usb 1-8.3: Product: External HDD
[12652.689805] usb 1-8.3: Manufacturer: Western Digital
[12652.689807] usb 1-8.3: SerialNumber: 5758455830384B324A313232
[12652.690942] usb-storage 1-8.3:1.0: USB Mass Storage device detected
[12652.691469] usb-storage 1-8.3:1.0: Quirks match for vid 1058 pid 0704: 8000
[12652.691522] scsi host1: usb-storage 1-8.3:1.0
[12653.733472] scsi 1:0:0:0: Direct-Access WD 3200BMV External 1.05 PQ: 0 ANSI: 4
[12653.734273] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[12653.734684] sd 1:0:0:0: [sdb] Write Protect is off
[12653.734695] sd 1:0:0:0: [sdb] Mode Sense: 21 00 00 00
[12653.735119] sd 1:0:0:0: [sdb] No Caching mode page found
[12653.735121] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[12653.735176] sd 1:0:0:0: Attached scsi generic sg1 type 0
[12653.754983] input: Liberty (AVRCP) as /devices/virtual/input/input25
[12653.782329] sdb: sdb1
[12653.783685] sd 1:0:0:0: [sdb] Attached SCSI disk
[12654.533050] sd 1:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
[12654.533055] sd 1:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 08 00 00 00 08 00
[12654.533057] blk_update_request: I/O error, dev sdb, sector 2048 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[12654.533105] usb 1-8.3: USB disconnect, device number 18
[12654.537804] scsi 1:0:0:0: rejecting I/O to dead device
[12654.537809] blk_update_request: I/O error, dev sdb, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12654.537812] Buffer I/O error on dev sdb, logical block 256, async page read
[12659.284583] usb 1-8.3: new high-speed USB device number 19 using xhci_hcd
[12659.474184] usb 1-8.3: New USB device found, idVendor=1058, idProduct=0704, bcdDevice= 1.05
[12659.474188] usb 1-8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12659.474191] usb 1-8.3: Product: External HDD
[12659.474193] usb 1-8.3: Manufacturer: Western Digital
[12659.474194] usb 1-8.3: SerialNumber: 5758455830384B324A313232
[12659.478032] usb-storage 1-8.3:1.0: USB Mass Storage device detected
[12659.478121] usb-storage 1-8.3:1.0: Quirks match for vid 1058 pid 0704: 8000
[12659.478161] scsi host1: usb-storage 1-8.3:1.0
[12660.517205] scsi 1:0:0:0: Direct-Access WD 3200BMV External 1.05 PQ: 0 ANSI: 4
[12660.517741] sd 1:0:0:0: Attached scsi generic sg1 type 0
[12660.519253] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[12660.519591] sd 1:0:0:0: [sdb] Write Protect is off
[12660.519594] sd 1:0:0:0: [sdb] Mode Sense: 21 00 00 00
[12660.519946] sd 1:0:0:0: [sdb] No Caching mode page found
[12660.519947] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[12660.567058] sdb: sdb1
[12660.568263] sd 1:0:0:0: [sdb] Attached SCSI disk
[12661.332843] sd 1:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
[12661.332845] sd 1:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 08 00 00 00 08 00
[12661.332848] blk_update_request: I/O error, dev sdb, sector 2048 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[12661.332908] usb 1-8.3: USB disconnect, device number 19
[12661.336458] scsi 1:0:0:0: rejecting I/O to dead device
[12661.336464] blk_update_request: I/O error, dev sdb, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12661.336468] Buffer I/O error on dev sdb, logical block 256, async page read
[12666.085241] usb 1-8.3: new high-speed USB device number 20 using xhci_hcd
[12666.281391] usb 1-8.3: New USB device found, idVendor=1058, idProduct=0704, bcdDevice= 1.05
[12666.281394] usb 1-8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12666.281397] usb 1-8.3: Product: External HDD
[12666.281399] usb 1-8.3: Manufacturer: Western Digital
[12666.281400] usb 1-8.3: SerialNumber: 5758455830384B324A313232
[12666.282577] usb-storage 1-8.3:1.0: USB Mass Storage device detected
[12666.282673] usb-storage 1-8.3:1.0: Quirks match for vid 1058 pid 0704: 8000
[12666.282720] scsi host1: usb-storage 1-8.3:1.0
[12667.300689] scsi 1:0:0:0: Direct-Access WD 3200BMV External 1.05 PQ: 0 ANSI: 4
[12667.300923] sd 1:0:0:0: Attached scsi generic sg1 type 0
[12667.301111] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[12667.302209] sd 1:0:0:0: [sdb] Write Protect is off
[12667.302212] sd 1:0:0:0: [sdb] Mode Sense: 21 00 00 00
[12667.302595] sd 1:0:0:0: [sdb] No Caching mode page found
[12667.302600] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[12667.359411] sdb: sdb1
[12667.360651] sd 1:0:0:0: [sdb] Attached SCSI disk
[12668.124328] sd 1:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
[12668.124331] sd 1:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 08 00 00 00 08 00
[12668.124333] blk_update_request: I/O error, dev sdb, sector 2048 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[12668.124385] usb 1-8.3: USB disconnect, device number 20
[12668.128098] scsi 1:0:0:0: rejecting I/O to dead device
[12668.128102] blk_update_request: I/O error, dev sdb, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12668.128105] Buffer I/O error on dev sdb, logical block 256, async page read
[12672.883902] usb 1-8.3: new high-speed USB device number 21 using xhci_hcd
[12673.073096] usb 1-8.3: New USB device found, idVendor=1058, idProduct=0704, bcdDevice= 1.05
[12673.073101] usb 1-8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12673.073103] usb 1-8.3: Product: External HDD
[12673.073105] usb 1-8.3: Manufacturer: Western Digital
[12673.073107] usb 1-8.3: SerialNumber: 5758455830384B324A313232
[12673.074455] usb-storage 1-8.3:1.0: USB Mass Storage device detected
[12673.074622] usb-storage 1-8.3:1.0: Quirks match for vid 1058 pid 0704: 8000
[12673.074686] scsi host1: usb-storage 1-8.3:1.0
[12674.084458] scsi 1:0:0:0: Direct-Access WD 3200BMV External 1.05 PQ: 0 ANSI: 4
[12674.085878] sd 1:0:0:0: Attached scsi generic sg1 type 0
[12674.086298] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[12674.086656] sd 1:0:0:0: [sdb] Write Protect is off
[12674.086658] sd 1:0:0:0: [sdb] Mode Sense: 21 00 00 00
[12674.086981] sd 1:0:0:0: [sdb] No Caching mode page found
[12674.086982] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[12674.139007] sdb: sdb1
[12674.140188] sd 1:0:0:0: [sdb] Attached SCSI disk
[12674.900045] sd 1:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
[12674.900047] sd 1:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 08 00 00 00 08 00
[12674.900049] blk_update_request: I/O error, dev sdb, sector 2048 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[12674.900097] usb 1-8.3: USB disconnect, device number 21
[12674.903803] scsi 1:0:0:0: rejecting I/O to dead device
[12674.903809] blk_update_request: I/O error, dev sdb, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12674.903812] Buffer I/O error on dev sdb, logical block 256, async page read
[12679.667545] usb 1-8.3: new high-speed USB device number 22 using xhci_hcd
[12679.856795] usb 1-8.3: New USB device found, idVendor=1058, idProduct=0704, bcdDevice= 1.05
[12679.856798] usb 1-8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12679.856799] usb 1-8.3: Product: External HDD
[12679.856800] usb 1-8.3: Manufacturer: Western Digital
[12679.856801] usb 1-8.3: SerialNumber: 5758455830384B324A313232
[12679.858453] usb-storage 1-8.3:1.0: USB Mass Storage device detected
[12679.858652] usb-storage 1-8.3:1.0: Quirks match for vid 1058 pid 0704: 8000
[12679.858691] scsi host1: usb-storage 1-8.3:1.0
[12680.868158] scsi 1:0:0:0: Direct-Access WD 3200BMV External 1.05 PQ: 0 ANSI: 4
[12680.869001] sd 1:0:0:0: Attached scsi generic sg1 type 0
[12680.869314] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[12680.869711] sd 1:0:0:0: [sdb] Write Protect is off
[12680.869717] sd 1:0:0:0: [sdb] Mode Sense: 21 00 00 00
[12680.870092] sd 1:0:0:0: [sdb] No Caching mode page found
[12680.870097] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[12680.917177] sdb: sdb1
[12680.918355] sd 1:0:0:0: [sdb] Attached SCSI disk
[12681.691739] sd 1:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
[12681.691742] sd 1:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 08 00 00 00 08 00
[12681.691744] blk_update_request: I/O error, dev sdb, sector 2048 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[12681.691782] usb 1-8.3: USB disconnect, device number 22
[12681.696466] scsi 1:0:0:0: rejecting I/O to dead device
[12681.696471] blk_update_request: I/O error, dev sdb, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12681.696473] Buffer I/O error on dev sdb, logical block 256, async page read
[12686.451250] usb 1-8.3: new high-speed USB device number 23 using xhci_hcd
[12686.640166] usb 1-8.3: New USB device found, idVendor=1058, idProduct=0704, bcdDevice= 1.05
[12686.640168] usb 1-8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12686.640170] usb 1-8.3: Product: External HDD
[12686.640171] usb 1-8.3: Manufacturer: Western Digital
[12686.640172] usb 1-8.3: SerialNumber: 5758455830384B324A313232
[12686.642251] usb-storage 1-8.3:1.0: USB Mass Storage device detected
[12686.642400] usb-storage 1-8.3:1.0: Quirks match for vid 1058 pid 0704: 8000
[12686.642428] scsi host1: usb-storage 1-8.3:1.0
[12687.651902] scsi 1:0:0:0: Direct-Access WD 3200BMV External 1.05 PQ: 0 ANSI: 4
[12687.653443] sd 1:0:0:0: Attached scsi generic sg1 type 0
[12687.654525] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[12687.654856] sd 1:0:0:0: [sdb] Write Protect is off
[12687.654858] sd 1:0:0:0: [sdb] Mode Sense: 21 00 00 00
[12687.655199] sd 1:0:0:0: [sdb] No Caching mode page found
[12687.655201] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[12688.339466] usb 1-8.3: USB disconnect, device number 23
[12688.348151] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12688.348154] Buffer I/O error on dev sdb, logical block 0, async page read
[12688.348173] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12688.348174] Buffer I/O error on dev sdb, logical block 0, async page read
[12688.348181] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12688.348182] Buffer I/O error on dev sdb, logical block 0, async page read
[12688.348185] ldm_validate_partition_table(): Disk read failed.
[12688.348189] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12688.348190] Buffer I/O error on dev sdb, logical block 0, async page read
[12688.348196] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12688.348196] Buffer I/O error on dev sdb, logical block 0, async page read
[12688.348202] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12688.348202] Buffer I/O error on dev sdb, logical block 0, async page read
[12688.348208] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12688.348209] Buffer I/O error on dev sdb, logical block 0, async page read
[12688.348211] Dev sdb: unable to read RDB block 0
[12688.348215] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12688.348216] Buffer I/O error on dev sdb, logical block 0, async page read
[12688.348222] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12688.348223] Buffer I/O error on dev sdb, logical block 0, async page read
[12688.348225] sdb: unable to read partition table
[12688.348474] sd 1:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[12688.348476] sd 1:0:0:0: [sdb] Sense not available.
[12688.348479] sd 1:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[12688.348495] sd 1:0:0:0: [sdb] Attached SCSI disk
[12692.987976] usb 1-8.3: new high-speed USB device number 24 using xhci_hcd
[12693.183668] usb 1-8.3: New USB device found, idVendor=1058, idProduct=0704, bcdDevice= 1.05
[12693.183670] usb 1-8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12693.183672] usb 1-8.3: Product: External HDD
[12693.183673] usb 1-8.3: Manufacturer: Western Digital
[12693.183674] usb 1-8.3: SerialNumber: 5758455830384B324A313232
[12693.187549] usb-storage 1-8.3:1.0: USB Mass Storage device detected
[12693.191388] usb-storage 1-8.3:1.0: Quirks match for vid 1058 pid 0704: 8000
[12693.191451] scsi host1: usb-storage 1-8.3:1.0
[12694.243335] scsi 1:0:0:0: Direct-Access WD 3200BMV External 1.05 PQ: 0 ANSI: 4
[12694.243545] sd 1:0:0:0: Attached scsi generic sg1 type 0
[12694.243752] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[12694.244101] sd 1:0:0:0: [sdb] Write Protect is off
[12694.244103] sd 1:0:0:0: [sdb] Mode Sense: 21 00 00 00
[12694.244461] sd 1:0:0:0: [sdb] No Caching mode page found
[12694.244462] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[12694.931077] usb 1-8.3: USB disconnect, device number 24
[12694.938841] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12694.938845] Buffer I/O error on dev sdb, logical block 0, async page read
[12694.938912] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12694.938913] Buffer I/O error on dev sdb, logical block 0, async page read
[12694.938923] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12694.938924] Buffer I/O error on dev sdb, logical block 0, async page read
[12694.938927] ldm_validate_partition_table(): Disk read failed.
[12694.938932] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12694.938932] Buffer I/O error on dev sdb, logical block 0, async page read
[12694.938938] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12694.938939] Buffer I/O error on dev sdb, logical block 0, async page read
[12694.938944] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12694.938945] Buffer I/O error on dev sdb, logical block 0, async page read
[12694.938951] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12694.938951] Buffer I/O error on dev sdb, logical block 0, async page read
[12694.938954] Dev sdb: unable to read RDB block 0
[12694.938958] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12694.938959] Buffer I/O error on dev sdb, logical block 0, async page read
[12694.938965] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12694.938965] Buffer I/O error on dev sdb, logical block 0, async page read
[12694.938968] sdb: unable to read partition table
[12694.939194] sd 1:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[12694.939199] sd 1:0:0:0: [sdb] Sense not available.
[12694.939202] sd 1:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[12694.939229] sd 1:0:0:0: [sdb] Write Protect is on
[12694.939231] sd 1:0:0:0: [sdb] Mode Sense: 4f 35 8d 3a
[12694.939244] sd 1:0:0:0: [sdb] Attached SCSI disk
[12699.682704] usb 1-8.3: new high-speed USB device number 25 using xhci_hcd
[12699.871720] usb 1-8.3: New USB device found, idVendor=1058, idProduct=0704, bcdDevice= 1.05
[12699.871724] usb 1-8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12699.871727] usb 1-8.3: Product: External HDD
[12699.871728] usb 1-8.3: Manufacturer: Western Digital
[12699.871730] usb 1-8.3: SerialNumber: 5758455830384B324A313232
[12699.874188] usb-storage 1-8.3:1.0: USB Mass Storage device detected
[12699.874394] usb-storage 1-8.3:1.0: Quirks match for vid 1058 pid 0704: 8000
[12699.874437] scsi host1: usb-storage 1-8.3:1.0
[12700.899303] scsi 1:0:0:0: Direct-Access WD 3200BMV External 1.05 PQ: 0 ANSI: 4
[12700.899858] sd 1:0:0:0: Attached scsi generic sg1 type 0
[12700.900591] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[12700.900929] sd 1:0:0:0: [sdb] Write Protect is off
[12700.900931] sd 1:0:0:0: [sdb] Mode Sense: 21 00 00 00
[12700.901272] sd 1:0:0:0: [sdb] No Caching mode page found
[12700.901273] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[12700.952714] sdb: sdb1
[12700.954078] sd 1:0:0:0: [sdb] Attached SCSI disk
[12701.714641] sd 1:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
[12701.714645] sd 1:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 08 00 00 00 08 00
[12701.714648] blk_update_request: I/O error, dev sdb, sector 2048 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[12701.714701] usb 1-8.3: USB disconnect, device number 25
[12701.718497] scsi 1:0:0:0: rejecting I/O to dead device
[12701.718506] blk_update_request: I/O error, dev sdb, sector 2048 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[12701.718510] Buffer I/O error on dev sdb, logical block 256, async page read
[12706.467257] usb 1-8.3: new high-speed USB device number 26 using xhci_hcd
[12706.663056] usb 1-8.3: New USB device found, idVendor=1058, idProduct=0704, bcdDevice= 1.05
[12706.663058] usb 1-8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[12706.663060] usb 1-8.3: Product: External HDD
[12706.663061] usb 1-8.3: Manufacturer: Western Digital
[12706.663062] usb 1-8.3: SerialNumber: 5758455830384B324A313232
[12706.664239] usb-storage 1-8.3:1.0: USB Mass Storage device detected
[12706.666090] usb-storage 1-8.3:1.0: Quirks match for vid 1058 pid 0704: 8000
[12706.666107] scsi host1: usb-storage 1-8.3:1.0
[12707.683079] scsi 1:0:0:0: Direct-Access WD 3200BMV External 1.05 PQ: 0 ANSI: 4
[12707.683912] sd 1:0:0:0: Attached scsi generic sg1 type 0
[12707.684111] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[12707.684688] sd 1:0:0:0: [sdb] Write Protect is off
[12707.684694] sd 1:0:0:0: [sdb] Mode Sense: 21 00 00 00
[12707.685039] sd 1:0:0:0: [sdb] No Caching mode page found
[12707.685042] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[12707.739437] sdb: sdb1
[12707.740618] sd 1:0:0:0: [sdb] Attached SCSI disk
[12708.316206] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.