Fedora-Fr - Communauté francophone Fedora - Linux

Communauté francophone des utilisateurs de la distribution Linux Fedora.

  

Dernière news : Rétrospective de l'adoption du nouveau logo de Fedora

#1 10/01/2020 20:39:42

talziary
Membre
Inscription : 24/01/2008
Messages : 124

[Résolu] freeze avant upgrade

Bonjour,

J'essaye d'installer Fedora sur un DELL Precision 7540. Tout se passe bien jusqu'au moment de faire le premier dnf upgrade  : la transaction est ok  mais après j'ai de  nombreux freeze aléatoires sur les scriplet
puis des blocages de la souris obligeant à rebooter : impossible de faire l'upgrade initial.

Comme j'ai observé des messages d'erreur laconiques relatifs à nouveau je pense que nouveau est peut-être incapable de gérer   cet écran.

J'ai alors essayé d'installer akmod_nvidia mais au login j'ai un message "Nvidia kernel module missing falling back to nouveau"  qui montre que ça n'a pas marché. C'était peut-être un peu risqué de faire ça avant l'upgrade initial mais tout semblait s'être passé correctement.

J'ai aussi au reboot un message d'erreur relatif à BOOT-IMAGE=(hd0,gpt5)/vmlinuz-5.3.7-301.fc31.x86_64

Ci-dessous quelques infos sur la config

>df
Sys. de fichiers          blocs de 1K  Utilisé Disponible Uti% Monté sur
devtmpfs                      8049684        0    8049684   0% /dev
tmpfs                         8071244        0    8071244   0% /dev/shm
tmpfs                         8071244     2344    8068900   1% /run
/dev/mapper/GVFedora-root    41022688 10874692   28034460  28% /
tmpfs                         8071244       36    8071208   1% /tmp
/dev/nvme0n1p5                1998672   154148    1723284   9% /boot
/dev/nvme0n1p1                 692224    59388     632836   9% /boot/efi
/dev/mapper/GVFedora-home   368364104   148304  349434208   1% /home
tmpfs                         1614248       24    1614224   1% /run/user/42
tmpfs                         1614248       56    1614192   1% /run/user/1000
>lspci
00:00.0 Host bridge: Intel Corporation Device 3e20 (rev 0d)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16) (rev 0d)
00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 630 (Mobile) (rev 02)
00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 0d)
00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model
00:12.0 Signal processing controller: Intel Corporation Cannon Lake PCH Thermal Controller (rev 10)
00:14.0 USB controller: Intel Corporation Cannon Lake PCH USB 3.1 xHCI Host Controller (rev 10)
00:14.2 RAM memory: Intel Corporation Cannon Lake PCH Shared SRAM (rev 10)
00:15.0 Serial bus controller [0c80]: Intel Corporation Cannon Lake PCH Serial IO I2C Controller #0 (rev 10)
00:15.1 Serial bus controller [0c80]: Intel Corporation Cannon Lake PCH Serial IO I2C Controller #1 (rev 10)
00:16.0 Communication controller: Intel Corporation Cannon Lake PCH HECI Controller (rev 10)
00:17.0 SATA controller: Intel Corporation Cannon Lake Mobile PCH SATA AHCI Controller (rev 10)
00:1b.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #21 (rev f0)
00:1c.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #1 (rev f0)
00:1c.5 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #6 (rev f0)
00:1c.6 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #7 (rev f0)
00:1f.0 ISA bridge: Intel Corporation Device a30e (rev 10)
00:1f.3 Audio device: Intel Corporation Cannon Lake PCH cAVS (rev 10)
00:1f.4 SMBus: Intel Corporation Cannon Lake PCH SMBus Controller (rev 10)
00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon Lake PCH SPI Controller (rev 10)
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (7) I219-LM (rev 10)
01:00.0 VGA compatible controller: NVIDIA Corporation TU117GLM [Quadro T1000 Mobile] (rev a1)
01:00.1 Audio device: NVIDIA Corporation Device 10fa (rev a1)
02:00.0 Non-Volatile memory controller: Micron Technology Inc Device 5410 (rev 01)
03:00.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018] (rev 06)
04:00.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018] (rev 06)
04:01.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018] (rev 06)
04:02.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018] (rev 06)
04:04.0 PCI bridge: Intel Corporation JHL7540 Thunderbolt 3 Bridge [Titan Ridge 4C 2018] (rev 06)
05:00.0 System peripheral: Intel Corporation JHL7540 Thunderbolt 3 NHI [Titan Ridge 4C 2018] (rev 06)
39:00.0 USB controller: Intel Corporation JHL7540 Thunderbolt 3 USB Controller [Titan Ridge 4C 2018] (rev 06)
6e:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5260 PCI Express Card Reader (rev 01)
6f:00.0 Network controller: Intel Corporation Wi-Fi 6 AX200 (rev 1a)
>dnf info akmod-nvidia
Dernière vérification de l’expiration des métadonnées effectuée il y a 0:18:57 le ven. 10 janv. 2020 18:35:14 CET.
Paquets installés
Nom          : akmod-nvidia
Époque       : 3
Version      : 440.44
Publication  : 1.fc31
Architecture : x86_64
Taille       : 22 k
Source       : nvidia-kmod-440.44-1.fc31.src.rpm
Dépôt        : @System
Depuis le dé : rpmfusion-nonfree-updates
Résumé       : Akmod package for nvidia kernel module(s)
URL          : http://www.nvidia.com/
Licence      : Redistributable, no modification permitted
Description  : This package provides the akmod package for the nvidia kernel
             : modules.

et peut-être plus utile

journalctl -p err --since "2020-01-11 08:00:00"
-- Logs begin at Fri 2020-01-10 18:17:36 CET, end at Sat 2020-01-11 10:03:58 CET. --
janv. 11 10:42:00 localhost.localdomain kernel: [drm:lspcon_init [i915]] *ERROR* Failed to probe lspcon
janv. 11 10:42:00 localhost.localdomain kernel: [drm:intel_ddi_init [i915]] *ERROR* LSPCON init failed on port D
janv. 11 09:42:08 localhost.localdomain systemd-udevd[719]: /usr/lib/udev/rules.d/65-md-incremental.rules:28 Invalid value "/sbin/mdadm -I $env{DEVNAME} --export $devnode >
janv. 11 09:42:08 localhost.localdomain systemd-udevd[719]: /usr/lib/udev/rules.d/99-vmware-scsi-udev.rules:5 Invalid value "/bin/sh -c 'echo 180 >/sys$DEVPATH/device/time>
janv. 11 09:42:08 localhost.localdomain systemd-udevd[719]: /usr/lib/udev/rules.d/99-vmware-scsi-udev.rules:6 Invalid value "/bin/sh -c 'echo 180 >/sys$DEVPATH/device/time>
janv. 11 09:42:08 localhost.localdomain kernel: iTCO_wdt iTCO_wdt: can't request region for resource [mem 0x00c5fffc-0x00c5ffff]
janv. 11 09:42:09 localhost.localdomain kernel: nouveau 0000:01:00.0: DRM: failed to create kernel channel, -22
janv. 11 09:42:10 localhost.localdomain kernel: iwlwifi 0000:6f:00.0: BIOS contains WGDS but no WRDS
janv. 11 09:42:10 localhost.localdomain kernel: iwlwifi 0000:6f:00.0: BIOS contains WGDS but no WRDS
janv. 11 09:42:10 localhost.localdomain wpa_supplicant[1233]: nl80211: kernel reports: Attribute failed policy validation
janv. 11 09:42:10 localhost.localdomain wpa_supplicant[1233]: Failed to create interface p2p-dev-wlp111s0: -22 (Invalid argument)
janv. 11 09:42:10 localhost.localdomain wpa_supplicant[1233]: nl80211: Failed to create a P2P Device interface p2p-dev-wlp111s0
janv. 11 09:42:11 localhost.localdomain kernel: Bluetooth: hci0: command 0xfc09 tx timeout
janv. 11 09:42:12 localhost.localdomain abrt-notification[1295]: System encountered a non-fatal error in corec57d_init()
janv. 11 09:42:13 localhost.localdomain kernel: iwlwifi 0000:6f:00.0: BIOS contains WGDS but no WRDS
janv. 11 09:42:19 localhost.localdomain kernel: Bluetooth: hci0: Failed to send firmware data (-110)
janv. 11 09:42:31 DESKTOP-VSL75SC gdm-password][1681]: gkr-pam: unable to locate daemon control file


Merci d'avance à ceux  qui m'aideront à me sortir de cette galère

Dernière modification par talziary (11/01/2020 11:10:29)

Hors ligne

#2 11/01/2020 12:37:47

talziary
Membre
Inscription : 24/01/2008
Messages : 124

Re : [Résolu] freeze avant upgrade

Et finalement après de nombreuses tentatives on finit par faire une mise à jour complète (une seule fenêtre et rien d'autre et surtout ne pas toucher à la souris)
et ça semble ok (plus de freeze) mais il y a quelques erreurs au cours de la mise à jour (voir ci-joint) sans doute sans gravité ???
Par contre j'ai toujours le message "oups à propos de BOOT-IMAGE....." au démarrage ce qui me semble pas normal

Je ne sais pas pourquoi akamod-nvidia ne marche pas pour cette carte NVIDIA Quadro T1000 mais je vais le supprimer puisque nouveau semble fonctionner

Erreurs au cours de dnf update : 

 Mise à jour de        : grub2-common-1:2.02-104.fc31.noarch                                                                                                       20/1177 
erreur : lsetfilecon: (/boot/efi/EFI/fedora, system_u:object_r:boot_t:s0) Operation not supported

  Mise à jour de        : java-1.8.0-openjdk-headless-1:1.8.0.232.b09-0.fc31.x86_64                                                                                196/1177 
attention : /etc/java/java-1.8.0-openjdk/java-1.8.0-openjdk-1.8.0.232.b09-0.fc31.x86_64/lib/security/java.policy créé en tant que /etc/java/java-1.8.0-openjdk/java-1.8.0-openjdk-1.8.0.232.b09-0.fc31.x86_64/lib/security/java.policy.rpmnew
attention : /etc/java/java-1.8.0-openjdk/java-1.8.0-openjdk-1.8.0.232.b09-0.fc31.x86_64/lib/security/java.security créé en tant que /etc/java/java-1.8.0-openjdk/java-1.8.0-openjdk-1.8.0.232.b09-0.fc31.x86_64/lib/security/java.security.rpmnew

  Exécution du scriptlet: java-1.8.0-openjdk-headless-1:1.8.0.232.b09-0.fc31.x86_64                                                                                196/1177 
restored /etc/java/java-1.8.0-openjdk/java-1.8.0-openjdk-1.8.0.232.b09-0.fc31.x86_64/lib/security/java.security.rpmnew to /etc/java/java-1.8.0-openjdk/java-1.8.0-openjdk-1.8.0.232.b09-0.fc31.x86_64/lib/security/java.security
restored /etc/java/java-1.8.0-openjdk/java-1.8.0-openjdk-1.8.0.232.b09-0.fc31.x86_64/lib/security/java.policy.rpmnew to /etc/java/java-1.8.0-openjdk/java-1.8.0-openjdk-1.8.0.232.b09-0.fc31.x86_64/lib/security/java.policy
mv: impossible d'évaluer '/etc/java/java-1.8.0-openjdk/java-1.8.0-openjdk-1.8.0.232.b09-0.fc31.x86_64/lib/security/java.security.rpmnew': No such file or directory
FAILED to restore /etc/java/java-1.8.0-openjdk/java-1.8.0-openjdk-1.8.0.232.b09-0.fc31.x86_64/lib/security/java.security.rpmnew to /etc/java/java-1.8.0-openjdk/java-1.8.0-openjdk-1.8.0.232.b09-0.fc31.x86_64/lib/security/java.security
mv: impossible d'évaluer '/etc/java/java-1.8.0-openjdk/java-1.8.0-openjdk-1.8.0.232.b09-0.fc31.x86_64/lib/security/java.policy.rpmnew': No such file or directory
FAILED to restore /etc/java/java-1.8.0-openjdk/java-1.8.0-openjdk-1.8.0.232.b09-0.fc31.x86_64/lib/security/java.policy.rpmnew to /etc/java/java-1.8.0-openjdk/java-1.8.0-openjdk-1.8.0.232.b09-0.fc31.x86_64/lib/security/java.policy

 Exécution du scriptlet: selinux-policy-targeted-3.14.4-43.fc31.noarch                                                                                            219/1177 
Conflicting name type transition rules
Binary policy creation failed at /var/lib/selinux/targeted/tmp/modules/200/container/cil:1784
Failed to generate binary
/usr/sbin/semodule:  Failed!

  Mise à jour de        : grub2-efi-ia32-1:2.02-104.fc31.x86_64                                                                                                    492/1177 
erreur : lsetfilecon: (/boot/efi/EFI/fedora/fonts, system_u:object_r:boot_t:s0) Operation not supported
erreur : lsetfilecon: (/boot/efi/EFI/fedora/grubia32.efi;5e199b9d, system_u:object_r:boot_t:s0) Operation not supported

  Mise à jour de        : grub2-efi-x64-1:2.02-104.fc31.x86_64                                                                                                     493/1177 
erreur : lsetfilecon: (/boot/efi/EFI/fedora/grubx64.efi;5e199b9d, system_u:object_r:boot_t:s0) Operation not supported

  Mise à jour de        : grub2-efi-ia32-cdboot-1:2.02-104.fc31.x86_64                                                                                             556/1177 
erreur : lsetfilecon: (/boot/efi/EFI/fedora/fonts, system_u:object_r:boot_t:s0) Operation not supported
erreur : lsetfilecon: (/boot/efi/EFI/fedora/fonts/unicode.pf2;5e199b9d, system_u:object_r:boot_t:s0) Operation not supported
erreur : lsetfilecon: (/boot/efi/EFI/fedora/gcdia32.efi;5e199b9d, system_u:object_r:boot_t:s0) Operation not supported

  Mise à jour de        : grub2-efi-x64-cdboot-1:2.02-104.fc31.x86_64                                                                                              557/1177 
erreur : lsetfilecon: (/boot/efi/EFI/fedora/gcdx64.efi;5e199b9d, system_u:object_r:boot_t:s0) Operation not supported

 Exécution du scriptlet: open-vm-tools-10.3.10-2.fc31.x86_64                                                                                                      730/1177 
Failed to try-restart vmtoolsd-init.service: Unit vmtoolsd-init.service not found.

  Exécution du scriptlet: abrt-addon-ccpp-2.12.2-1.fc31.x86_64                                                                                                     739/1177 
Failed to try-restart abrt-ccpp.service: Unit abrt-ccpp.service not found.

 Exécution du scriptlet: sssd-common-2.2.2-1.fc31.x86_64                                                                                                          853/1177 
Failed to try-restart sssd-autofs.service: Operation refused, unit sssd-autofs.service may be requested by dependency only (it is configured to refuse manual start/stop).
See system logs and 'systemctl status sssd-autofs.service' for details.
Failed to try-restart sssd-nss.service: Operation refused, unit sssd-nss.service may be requested by dependency only (it is configured to refuse manual start/stop).
See system logs and 'systemctl status sssd-nss.service' for details.
Failed to try-restart sssd-pac.service: Operation refused, unit sssd-pac.service may be requested by dependency only (it is configured to refuse manual start/stop).
See system logs and 'systemctl status sssd-pac.service' for details.
Failed to try-restart sssd-pam.service: Operation refused, unit sssd-pam.service may be requested by dependency only (it is configured to refuse manual start/stop).
See system logs and 'systemctl status sssd-pam.service' for details.
Failed to try-restart sssd-ssh.service: Operation refused, unit sssd-ssh.service may be requested by dependency only (it is configured to refuse manual start/stop).
See system logs and 'systemctl status sssd-ssh.service' for details.
Failed to try-restart sssd-sudo.service: Operation refused, unit sssd-sudo.service may be requested by dependency only (it is configured to refuse manual start/stop).
See system logs and 'systemctl status sssd-sudo.service' for details.

 Exécution du scriptlet: cups-1:2.2.12-2.fc31.x86_64                                                                                                              887/1177 
Job failed. See "journalctl -xe" for details.

Hors ligne

Pied de page des forums