à madko
ok, cet après midi j'ai passé mes auto en noauto (comportement que je voulais d'après la doc fstab) mais est-ce nécessaire le mettre ?
j'ai mis cela dans mon fstab :
/dev/sdb2 /run/media/bertrand/SSD-NTFS2 ntfs defauts,noauto,user 0 0
est-ce que je peux mettre :
/dev/sdb2 /run/media/bertrand/SSD-NTFS2 ntfs defaults,noauto,x-systemd.automount 0 0
est-ce qu'il me demandera un mot de passe lorsque je monterai cette partition ?
x-systemd.automount permet :
Cela exécutera fsck et mount de /home lors du premier accès tandis que le noyau mettra en mémoire tampon tous les accès à la partition /home jusqu'à ce qu'elle soit prête.
Là je coince :
Vos explication sont plus accessibles pour moi, merci, je vais modifier mon fstab dans ce sens.
Retour de la commande smartctl demandée
sur le disque qui posait problème :
[root@localhost ~]# smartctl -A /dev/sdd2
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.8-300.fc29.x86_64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 165 163 021 Pre-fail Always - 2725
4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5884
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 001 001 000 Old_age Always - 74769
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 095 095 000 Old_age Always - 5345
190 Airflow_Temperature_Cel 0x0022 076 037 045 Old_age Always In_the_past 24
194 Temperature_Celsius 0x0022 119 080 000 Old_age Always - 24
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0
[root@localhost ~]#
merci