Bonsoir ThierryR
Je te mets les réponses aux commandes que tu m'as données
C'est un peu long , mais je pense que tu sais qu'elles sont les bonnes lignes
[jenrem@linux ~]$ sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
could not open USB device 0x050d/0x705a at 002:004: Access denied (insufficient permissions)
could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
found USB scanner (vendor=0x04b8, product=0x085f) at libusb:002:003
could not open USB device 0x8087/0x0024 at 002:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 002:001: Access denied (insufficient permissions)
could not open USB device 0x04f2/0xb086 at 001:003: Access denied (insufficient permissions)
could not open USB device 0x8087/0x0024 at 001:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions)
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
La réponse à scanimage -L
device `epson2:libusb:002:003' is a Epson PID 085F flatbed scanner
[jenrem@linux ~]$
La réponse à ping
[jenrem@linux ~]$ ping 192.168.1.31-w10
ping: 192.168.1.31-w10: Name or service not known
[jenrem@linux ~]$ sudo ping 192.168.1.31 -w10
[sudo] Mot de passe de jenrem :
PING 192.168.1.31 (192.168.1.31) 56(84) bytes of data.
64 bytes from 192.168.1.31: icmp_seq=1 ttl=64 time=2115 ms
64 bytes from 192.168.1.31: icmp_seq=2 ttl=64 time=1097 ms
64 bytes from 192.168.1.31: icmp_seq=3 ttl=64 time=72.8 ms
64 bytes from 192.168.1.31: icmp_seq=4 ttl=64 time=15.7 ms
64 bytes from 192.168.1.31: icmp_seq=5 ttl=64 time=15.2 ms
64 bytes from 192.168.1.31: icmp_seq=6 ttl=64 time=15.2 ms
64 bytes from 192.168.1.31: icmp_seq=7 ttl=64 time=14.9 ms
64 bytes from 192.168.1.31: icmp_seq=8 ttl=64 time=15.6 ms
64 bytes from 192.168.1.31: icmp_seq=9 ttl=64 time=16.1 ms
64 bytes from 192.168.1.31: icmp_seq=10 ttl=64 time=15.10 ms
--- 192.168.1.31 ping statistics ---
10 packets transmitted, 10 received, 0% packet loss, time 63ms
rtt min/avg/max/mdev = 14.856/339.298/2114.871/673.119 ms, pipe 3
je te confirme , le scanner fonctionne correctement
Merci
Bonne soirée