Fedora-Fr - Communauté francophone Fedora - Linux

Communauté francophone des utilisateurs de la distribution Linux Fedora.

  

Dernière news : Assemblée Générale de Borsalinux-fr le 20 janvier à Paris

#1 09/01/2018 08:31:32

Torp1lle
Membre
Inscription : 06/01/2018
Messages : 7

Carte ethernet détectée lspci, pilote installé, no network.

Bonjour à tous !
J'ai un souci sur une FC24. J'ai une carte ethernet intel gigabit rebelle.
Sous lspci : 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
Sous ifconfig je n'ai que lo et wls1.
Le gestionnaire de connexion reseau ne voit pas la carte donc je ne peux pas créer l'interface.
Le pilote installé est bien le Intel e1000e.
:'(

Merci de m'aider !

(pour info ma distri a été installée avec la carte désactivée dans le bios. Je l'ai réactivée quelques jours après l'install)

Hors ligne

#2 09/01/2018 18:22:12

Nicosss
Membre
Lieu : Isère
Inscription : 05/03/2007
Messages : 3 695
Site Web

Re : Carte ethernet détectée lspci, pilote installé, no network.

Torp1lle a écrit :

(pour info ma distri a été installée avec la carte désactivée dans le bios. Je l'ai réactivée quelques jours après l'install)

Pourquoi ne pas avoir directement installé une Fedora 27 du coup ?


F27_64 Gnome-Shell - GA-990FXA-UD3 - Phenom II X6 1100T - NH-D14 - Ati HD 5570 Fanless - 8Go RAM /&/ F27_64 Gnome-Shell - GA-M55S-S3 - Athlon 64 X2 4200+ - GeminII - Ati HD5750 Fanless - 3Go RAM
F27_32 - 939A785GMH/128M - Athlon 64 4000+ - 2Go RAM /&/ F27_32 Gnome-Shell - EeePC 701 - 2Go RAM

Hors ligne

#3 09/01/2018 21:13:29

Torp1lle
Membre
Inscription : 06/01/2018
Messages : 7

Re : Carte ethernet détectée lspci, pilote installé, no network.

Bin c'est à dire que j'utilise Viperr9 et en attendant la X bah c'est Fedora 24 qui sert de base. roll

Hors ligne

#4 09/01/2018 22:02:14

Nicosss
Membre
Lieu : Isère
Inscription : 05/03/2007
Messages : 3 695
Site Web

Re : Carte ethernet détectée lspci, pilote installé, no network.

C'est vraiment parce que je connais les gens à l'origine de Viperr.

Que retourne (entre balises code <> https://forums.fedora-fr.org/help.php#bbcode)

$ lspci -nnk | grep -iA3 "Ethernet"

F27_64 Gnome-Shell - GA-990FXA-UD3 - Phenom II X6 1100T - NH-D14 - Ati HD 5570 Fanless - 8Go RAM /&/ F27_64 Gnome-Shell - GA-M55S-S3 - Athlon 64 X2 4200+ - GeminII - Ati HD5750 Fanless - 3Go RAM
F27_32 - 939A785GMH/128M - Athlon 64 4000+ - 2Go RAM /&/ F27_32 Gnome-Shell - EeePC 701 - 2Go RAM

Hors ligne

#5 09/01/2018 23:44:01

Torp1lle
Membre
Inscription : 06/01/2018
Messages : 7

Re : Carte ethernet détectée lspci, pilote installé, no network.

Ok merci. C'est bien viperr ^^

00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network Connection [8086:10f5] (rev 03)
	Subsystem: Lenovo Device [17aa:20ee]
	Kernel modules: e1000e

Pour info, si ça peut servir, j'ai tenté avec une carte ethernet usb toute pourrite et ça marche directement sans toucher à rien.

Dernière modification par Torp1lle (09/01/2018 23:46:36)

Hors ligne

#6 10/01/2018 06:01:21

Nicosss
Membre
Lieu : Isère
Inscription : 05/03/2007
Messages : 3 695
Site Web

Re : Carte ethernet détectée lspci, pilote installé, no network.

Essaye tout de même avec un Live Fedora 27 pour voir.

Que retourne

$ dmesg
$ nmcli general status
$ nmcli device show

F27_64 Gnome-Shell - GA-990FXA-UD3 - Phenom II X6 1100T - NH-D14 - Ati HD 5570 Fanless - 8Go RAM /&/ F27_64 Gnome-Shell - GA-M55S-S3 - Athlon 64 X2 4200+ - GeminII - Ati HD5750 Fanless - 3Go RAM
F27_32 - 939A785GMH/128M - Athlon 64 4000+ - 2Go RAM /&/ F27_32 Gnome-Shell - EeePC 701 - 2Go RAM

Hors ligne

#7 10/01/2018 06:07:58

chepioq
FEDORA FOR EVER
Lieu : a l'est de marseille
Inscription : 07/06/2006
Messages : 7 071

Re : Carte ethernet détectée lspci, pilote installé, no network.

On dirait que le driver n'est pas chargé
essaye cette commande

modprobe e1000e

Tout est dans tout... et réciproquement...
C'est quoi un chalumeau??? C'est un dromaludaire à deux bosses...
Quand le sage montre la lune l'imbécile regarde le doigt...
1277887812.gif

Hors ligne

#8 10/01/2018 13:20:57

Torp1lle
Membre
Inscription : 06/01/2018
Messages : 7

Re : Carte ethernet détectée lspci, pilote installé, no network.

Bon, voici ce que donnent dmesg et nmcli :

[thinkpad@ThinkpadX200 ~]$ dmesg
[    0.000000] Linux version 4.11.12-100.fc24.x86_64 (mockbuild@bkernel02.phx2.fedoraproject.org) (gcc version 6.3.1 20161221 (Red Hat 6.3.1-1) (GCC) ) #1 SMP Fri Jul 21 17:35:20 UTC 2017
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.11.12-100.fc24.x86_64 root=/dev/mapper/fedora-root00 ro rd.lvm.lv=fedora/root00 rd.lvm.lv=fedora/swap rhgb quiet LANG=fr_FR.UTF-8
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bd4a0fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bd4a1000-0x00000000bd4a6fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bd4a7000-0x00000000bd5b6fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bd5b7000-0x00000000bd60efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bd60f000-0x00000000bd6c5fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bd6c6000-0x00000000bd6d0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bd6d1000-0x00000000bd6d3fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bd6d4000-0x00000000bd6d7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bd6d8000-0x00000000bd6dbfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bd6dc000-0x00000000bd6defff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bd6df000-0x00000000bd705fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bd706000-0x00000000bd707fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bd708000-0x00000000bd90efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bd90f000-0x00000000bd99efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bd99f000-0x00000000bd9fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bd9ff000-0x00000000bd9fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bdc00000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023bffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: LENOVO 7459LB6/7459LB6, BIOS 6DET72WW (3.22 ) 10/25/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x23c000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-DBFFF uncachable
[    0.000000]   DC000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 23C000000 mask FFC000000 uncachable
[    0.000000]   1 base 0BE000000 mask FFE000000 uncachable
[    0.000000]   2 base 000000000 mask F80000000 write-back
[    0.000000]   3 base 080000000 mask FC0000000 write-back
[    0.000000]   4 base 100000000 mask F00000000 write-back
[    0.000000]   5 base 200000000 mask FC0000000 write-back
[    0.000000]   6 base 0BDE00000 mask FFFE00000 uncachable
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xbde00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbda00 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f72d0-0x000f72df] mapped at [ffff97a7800f72d0]
[    0.000000] Base memory trampoline at [ffff97a780098000] 98000 size 24576
[    0.000000] BRK [0x5e386000, 0x5e386fff] PGTABLE
[    0.000000] BRK [0x5e387000, 0x5e387fff] PGTABLE
[    0.000000] BRK [0x5e388000, 0x5e388fff] PGTABLE
[    0.000000] BRK [0x5e389000, 0x5e389fff] PGTABLE
[    0.000000] BRK [0x5e38a000, 0x5e38afff] PGTABLE
[    0.000000] BRK [0x5e38b000, 0x5e38bfff] PGTABLE
[    0.000000] BRK [0x5e38c000, 0x5e38cfff] PGTABLE
[    0.000000] BRK [0x5e38d000, 0x5e38dfff] PGTABLE
[    0.000000] BRK [0x5e38e000, 0x5e38efff] PGTABLE
[    0.000000] BRK [0x5e38f000, 0x5e38ffff] PGTABLE
[    0.000000] BRK [0x5e390000, 0x5e390fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3580b000-0x36bfdfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F7290 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000BD95B712 00009C (v01 LENOVO TP-6D    00003220  LTP 00000000)
[    0.000000] ACPI: FACP 0x00000000BD95B800 0000F4 (v03 LENOVO TP-6D    00003220 LNVO 00000001)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20170119/tbfadt-603)
[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20170119/tbfadt-708)
[    0.000000] ACPI: DSDT 0x00000000BD95BBF4 00DF43 (v01 LENOVO TP-6D    00003220 MSFT 03000000)
[    0.000000] ACPI: FACS 0x00000000BD98E000 000040
[    0.000000] ACPI: FACS 0x00000000BD98E000 000040
[    0.000000] ACPI: SSDT 0x00000000BD95B9B4 000240 (v01 LENOVO TP-6D    00003220 MSFT 03000000)
[    0.000000] ACPI: ECDT 0x00000000BD969B37 000052 (v01 LENOVO TP-6D    00003220 LNVO 00000001)
[    0.000000] ACPI: APIC 0x00000000BD969B89 000078 (v01 LENOVO TP-6D    00003220 LNVO 00000001)
[    0.000000] ACPI: MCFG 0x00000000BD969C01 00003C (v01 LENOVO TP-6D    00003220 LNVO 00000001)
[    0.000000] ACPI: HPET 0x00000000BD969C3D 000038 (v01 LENOVO TP-6D    00003220 LNVO 00000001)
[    0.000000] ACPI: SLIC 0x00000000BD969DC2 000176 (v01 LENOVO TP-6D    00003220  LTP 00000000)
[    0.000000] ACPI: BOOT 0x00000000BD969F38 000028 (v01 LENOVO TP-6D    00003220  LTP 00000001)
[    0.000000] ACPI: ASF! 0x00000000BD969F60 0000A0 (v16 LENOVO TP-6D    00003220 PTL  00000001)
[    0.000000] ACPI: SSDT 0x00000000BD98D1EA 000578 (v01 LENOVO TP-6D    00003220 INTL 20050513)
[    0.000000] ACPI: TCPA 0x00000000BD707000 000032 (v00                 00000000      00000000)
[    0.000000] ACPI: DMAR 0x00000000BD706000 000120 (v01        ?        00000001      00000000)
[    0.000000] ACPI: SSDT 0x00000000BD6D3000 000655 (v01 PmRef  CpuPm    00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 0x00000000BD6D2000 000274 (v01 PmRef  Cpu0Tst  00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 0x00000000BD6D1000 000242 (v01 PmRef  ApTst    00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023bffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x23bfd2000-0x23bffcfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000023bffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bd4a0fff]
[    0.000000]   node   0: [mem 0x00000000bd4a7000-0x00000000bd5b6fff]
[    0.000000]   node   0: [mem 0x00000000bd60f000-0x00000000bd6c5fff]
[    0.000000]   node   0: [mem 0x00000000bd9ff000-0x00000000bd9fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000023bffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023bffffff]
[    0.000000] On node 0 totalpages: 2070022
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12058 pages used for memmap
[    0.000000]   DMA32 zone: 771689 pages, LIFO batch:31
[    0.000000]   Normal zone: 20224 pages used for memmap
[    0.000000]   Normal zone: 1294336 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000be000000-0x00000000bfffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
[    0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd4a1000-0xbd4a6fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd5b7000-0xbd60efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd6c6000-0xbd6d0fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd6d1000-0xbd6d3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd6d4000-0xbd6d7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd6d8000-0xbd6dbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd6dc000-0xbd6defff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd6df000-0xbd705fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd706000-0xbd707fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd708000-0xbd90efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd90f000-0xbd99efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd99f000-0xbd9fefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbda00000-0xbdbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbdc00000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff97a9bbc00000 s108952 r8192 d30312 u524288
[    0.000000] pcpu-alloc: s108952 r8192 d30312 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2037655
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.11.12-100.fc24.x86_64 root=/dev/mapper/fedora-root00 ro rd.lvm.lv=fedora/root00 rd.lvm.lv=fedora/swap rhgb quiet LANG=fr_FR.UTF-8
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Memory: 8041688K/8280088K available (8702K kernel code, 1668K rwdata, 3604K rodata, 2124K init, 1816K bss, 238400K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:524544 nr_irqs:456 16
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-3.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.001000] tsc: Detected 2260.911 MHz processor
[    0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.82 BogoMIPS (lpj=2260911)
[    0.001000] pid_max: default: 32768 minimum: 301
[    0.001000] ACPI: Core revision 20170119
[    0.034330] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.034489] Security Framework initialized
[    0.034494] Yama: becoming mindful.
[    0.034508] SELinux:  Initializing.
[    0.034575] SELinux:  Starting in permissive mode
[    0.036448] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.043770] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.047248] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.047285] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.048238] Disabled fast string operations
[    0.048253] CPU: Physical Processor ID: 0
[    0.048255] CPU: Processor Core ID: 0
[    0.048259] mce: CPU supports 6 MCE banks
[    0.048275] CPU0: Thermal monitoring enabled (TM2)
[    0.048283] process: using mwait in idle threads
[    0.048294] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.048296] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.048681] Freeing SMP alternatives memory: 32K
[    0.051014] ftrace: allocating 31963 entries in 125 pages
[    0.076177] smpboot: Max logical packages: 2
[    0.076209] DMAR: Host address width 36
[    0.076212] DMAR: DRHD base: 0x000000feb03000 flags: 0x0
[    0.076227] DMAR: dmar0: reg_base_addr feb03000 ver 1:0 cap c9008020e30260 ecap 1000
[    0.076230] DMAR: DRHD base: 0x000000feb01000 flags: 0x0
[    0.076241] DMAR: dmar1: reg_base_addr feb01000 ver 1:0 cap c0000020630260 ecap 1000
[    0.076243] DMAR: DRHD base: 0x000000feb00000 flags: 0x0
[    0.076253] DMAR: dmar2: reg_base_addr feb00000 ver 1:0 cap c0000020630270 ecap 1000
[    0.076255] DMAR: DRHD base: 0x000000feb02000 flags: 0x1
[    0.076273] DMAR: dmar3: reg_base_addr feb02000 ver 1:0 cap c9008020630260 ecap 1000
[    0.076275] DMAR: RMRR base: 0x000000f2826c00 end: 0x000000f28273ff
[    0.076279] DMAR: RMRR base: 0x000000bdc00000 end: 0x000000bfffffff
[    0.076835] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.087000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz (family: 0x6, model: 0x17, stepping: 0x6)
[    0.087000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.087000] ... version:                2
[    0.087000] ... bit width:              40
[    0.087000] ... generic registers:      2
[    0.087000] ... value mask:             000000ffffffffff
[    0.087000] ... max period:             000000007fffffff
[    0.087000] ... fixed-purpose events:   3
[    0.087000] ... event mask:             0000000700000003
[    0.088979] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.089032] smp: Bringing up secondary CPUs ...
[    0.089450] x86: Booting SMP configuration:
[    0.089453] .... node  #0, CPUs:      #1
[    0.001000] Disabled fast string operations
[    0.151155] smp: Brought up 1 node, 2 CPUs
[    0.151155] smpboot: Total of 2 processors activated (9043.62 BogoMIPS)
[    0.153078] sched_clock: Marking stable (153000000, 0)->(293769797, -140769797)
[    0.154167] devtmpfs: initialized
[    0.154329] x86/mm: Memory block size: 128MB
[    0.164886] PM: Registering ACPI NVS region [mem 0xbd6c6000-0xbd6d0fff] (45056 bytes)
[    0.164890] PM: Registering ACPI NVS region [mem 0xbd6d8000-0xbd6dbfff] (16384 bytes)
[    0.164893] PM: Registering ACPI NVS region [mem 0xbd6df000-0xbd705fff] (159744 bytes)
[    0.164908] PM: Registering ACPI NVS region [mem 0xbd90f000-0xbd99efff] (589824 bytes)
[    0.165084] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.165105] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.165269] pinctrl core: initialized pinctrl subsystem
[    0.165366] RTC time: 18:35:26, date: 01/09/18
[    0.165658] NET: Registered protocol family 16
[    0.166337] cpuidle: using governor menu
[    0.166343] PCCT header not found.
[    0.166475] Simple Boot Flag at 0x35 set to 0x1
[    0.166533] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.166536] ACPI: bus type PCI registered
[    0.166540] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.166748] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.166754] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[    0.166778] PCI: Using configuration type 1 for base access
[    0.171941] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.172688] ACPI: Added _OSI(Module Device)
[    0.172691] ACPI: Added _OSI(Processor Device)
[    0.172693] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.172696] ACPI: Added _OSI(Processor Aggregator Device)
[    0.172701] ACPI : EC: EC started
[    0.172703] ACPI : EC: interrupt blocked
[    0.175112] ACPI: \: Used as first EC
[    0.175116] ACPI: \: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.175119] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.184002] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.276000] ACPI: Dynamic OEM Table Load:
[    0.276020] ACPI: SSDT 0xFFFF97A9B1C59800 0002C8 (v01 PmRef  Cpu0Ist  00003000 INTL 20050624)
[    0.276727] ACPI: Dynamic OEM Table Load:
[    0.276748] ACPI: SSDT 0xFFFF97A9B235A000 00087A (v01 PmRef  Cpu0Cst  00003001 INTL 20050624)
[    0.278071] ACPI: Dynamic OEM Table Load:
[    0.278088] ACPI: SSDT 0xFFFF97A9B1C4D800 0001CF (v01 PmRef  ApIst    00003000 INTL 20050624)
[    0.278637] ACPI: Dynamic OEM Table Load:
[    0.278652] ACPI: SSDT 0xFFFF97A9B1C44CC0 00008D (v01 PmRef  ApCst    00003000 INTL 20050624)
[    0.322554] ACPI : EC: EC stopped
[    0.322556] ACPI : EC: EC started
[    0.322558] ACPI : EC: interrupt blocked
[    0.323085] ACPI: \_SB_.PCI0.LPC_.EC__: Used as first EC
[    0.323090] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.323094] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions
[    0.323095] ACPI: Interpreter enabled
[    0.323152] ACPI: (supports S0 S3 S4 S5)
[    0.323155] ACPI: Using IOAPIC for interrupt routing
[    0.323219] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.461815] ACPI: Power Resource [PUBS] (on)
[    0.464905] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[    0.468188] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[    0.480928] acpi IBM0079:00: ACPI dock station (docks/bays count: 3)
[    0.482150] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.482420] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[    0.482684] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[    0.482947] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[    0.483220] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[    0.483483] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[    0.483745] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[    0.484007] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[    0.484290] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.484301] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.485426] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.485430] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.485459] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.486000] PCI host bridge to bus 0000:00
[    0.486007] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.486011] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.486016] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.486020] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.486023] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.486027] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.486032] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.486063] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[    0.486123] DMAR: Forcing write-buffer flush capability
[    0.486125] DMAR: Disabling IOMMU for graphics on this chipset
[    0.486331] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[    0.486360] pci 0000:00:02.0: reg 0x10: [mem 0xf2000000-0xf23fffff 64bit]
[    0.486378] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.486391] pci 0000:00:02.0: reg 0x20: [io  0x1800-0x1807]
[    0.486652] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[    0.486677] pci 0000:00:02.1: reg 0x10: [mem 0xf2400000-0xf24fffff 64bit]
[    0.486947] pci 0000:00:03.0: [8086:2a44] type 00 class 0x078000
[    0.486977] pci 0000:00:03.0: reg 0x10: [mem 0xf2826800-0xf282680f 64bit]
[    0.487094] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.487299] pci 0000:00:03.3: [8086:2a47] type 00 class 0x070002
[    0.487325] pci 0000:00:03.3: reg 0x10: [io  0x1830-0x1837]
[    0.487339] pci 0000:00:03.3: reg 0x14: [mem 0xf2624000-0xf2624fff]
[    0.487676] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000
[    0.487712] pci 0000:00:19.0: reg 0x10: [mem 0xf2600000-0xf261ffff]
[    0.487730] pci 0000:00:19.0: reg 0x14: [mem 0xf2625000-0xf2625fff]
[    0.487748] pci 0000:00:19.0: reg 0x18: [io  0x1840-0x185f]
[    0.487889] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.488024] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.488138] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.488227] pci 0000:00:1a.0: reg 0x20: [io  0x1860-0x187f]
[    0.488465] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.488573] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.488662] pci 0000:00:1a.1: reg 0x20: [io  0x1880-0x189f]
[    0.488939] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[    0.489027] pci 0000:00:1a.2: reg 0x20: [io  0x18a0-0x18bf]
[    0.489270] pci 0000:00:1a.2: System wakeup disabled by ACPI
[    0.489391] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.489427] pci 0000:00:1a.7: reg 0x10: [mem 0xf2826c00-0xf2826fff]
[    0.489597] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.489719] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.489837] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.489875] pci 0000:00:1b.0: reg 0x10: [mem 0xf2620000-0xf2623fff 64bit]
[    0.490056] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.490207] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.490318] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.490491] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.490623] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.490729] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[    0.490901] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.491034] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.491151] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[    0.491323] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.491456] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.491567] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.491655] pci 0000:00:1d.0: reg 0x20: [io  0x18c0-0x18df]
[    0.491888] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.491997] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.492094] pci 0000:00:1d.1: reg 0x20: [io  0x18e0-0x18ff]
[    0.492374] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.492463] pci 0000:00:1d.2: reg 0x20: [io  0x1c00-0x1c1f]
[    0.492745] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.492780] pci 0000:00:1d.7: reg 0x10: [mem 0xf2827000-0xf28273ff]
[    0.492948] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.493087] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.493193] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.493491] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[    0.493892] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[    0.493929] pci 0000:00:1f.2: reg 0x10: [io  0x1c48-0x1c4f]
[    0.493947] pci 0000:00:1f.2: reg 0x14: [io  0x183c-0x183f]
[    0.493965] pci 0000:00:1f.2: reg 0x18: [io  0x1c40-0x1c47]
[    0.493984] pci 0000:00:1f.2: reg 0x1c: [io  0x1838-0x183b]
[    0.494002] pci 0000:00:1f.2: reg 0x20: [io  0x1c20-0x1c3f]
[    0.494020] pci 0000:00:1f.2: reg 0x24: [mem 0xf2826000-0xf28267ff]
[    0.494136] pci 0000:00:1f.2: PME# supported from D3hot
[    0.494347] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.494382] pci 0000:00:1f.3: reg 0x10: [mem 0xf2827400-0xf28274ff 64bit]
[    0.494430] pci 0000:00:1f.3: reg 0x20: [io  0x1c60-0x1c7f]
[    0.494775] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.495017] pci 0000:03:00.0: [8086:08b1] type 00 class 0x028000
[    0.495186] pci 0000:03:00.0: reg 0x10: [mem 0xf2500000-0xf2501fff 64bit]
[    0.495977] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.499139] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.499152] pci 0000:00:1c.1:   bridge window [mem 0xf2500000-0xf25fffff]
[    0.499325] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[    0.499334] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.499341] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf1ffffff]
[    0.499354] pci 0000:00:1c.3:   bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[    0.499526] pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode)
[    0.499548] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.499552] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.499556] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.499560] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.499564] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.499567] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
[    0.523766] ACPI: Enabled 3 GPEs in block 00 to 3F
[    0.524042] ACPI : EC: interrupt unblocked
[    0.524064] ACPI : EC: event unblocked
[    0.524077] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.524081] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events
[    0.524339] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.524344] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.524363] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.524364] vgaarb: loaded
[    0.524677] SCSI subsystem initialized
[    0.524807] libata version 3.00 loaded.
[    0.524871] ACPI: bus type USB registered
[    0.524923] usbcore: registered new interface driver usbfs
[    0.524948] usbcore: registered new interface driver hub
[    0.524992] usbcore: registered new device driver usb
[    0.525263] PCI: Using ACPI for IRQ routing
[    0.528823] PCI: pci_cache_line_size set to 64 bytes
[    0.528971] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.528975] e820: reserve RAM buffer [mem 0xbd4a1000-0xbfffffff]
[    0.528980] e820: reserve RAM buffer [mem 0xbd5b7000-0xbfffffff]
[    0.528985] e820: reserve RAM buffer [mem 0xbd6c6000-0xbfffffff]
[    0.528997] e820: reserve RAM buffer [mem 0xbda00000-0xbfffffff]
[    0.529265] NetLabel: Initializing
[    0.529268] NetLabel:  domain hash size = 128
[    0.529269] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.529308] NetLabel:  unlabeled traffic allowed by default
[    0.529593] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.529602] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.529613] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.531734] clocksource: Switched to clocksource hpet
[    0.577348] VFS: Disk quotas dquot_6.6.0
[    0.577408] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.577670] pnp: PnP ACPI init
[    0.600363] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.600369] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.600373] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.600378] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[    0.600382] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[    0.600387] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[    0.600391] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[    0.600396] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.600400] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.600405] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.600409] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.600413] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.600418] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.600423] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.600434] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.622143] system 00:01: [io  0x1000-0x107f] has been reserved
[    0.622148] system 00:01: [io  0x1180-0x11ff] has been reserved
[    0.622154] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.622159] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.622163] system 00:01: [io  0x1600-0x167f] has been reserved
[    0.622167] system 00:01: [io  0x1680-0x169f] has been reserved
[    0.622174] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.622178] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.622183] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.622188] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.622192] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.622197] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[    0.622202] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.622211] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.622396] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.622467] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.622542] pnp 00:04: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active)
[    0.644893] pnp: PnP ACPI: found 5 devices
[    0.655027] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.655060] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.655068] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.655074] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.655092] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.655098] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.655149] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[    0.655165] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.655178] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.655186] pci 0000:00:1c.0: BAR 13: assigned [io  0x3000-0x3fff]
[    0.655192] pci 0000:00:1c.1: BAR 13: assigned [io  0x4000-0x4fff]
[    0.655201] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.655208] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.655218] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff]
[    0.655226] pci 0000:00:1c.0:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.655239] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.655244] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.655254] pci 0000:00:1c.1:   bridge window [mem 0xf2500000-0xf25fffff]
[    0.655262] pci 0000:00:1c.1:   bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.655274] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[    0.655280] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.655289] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf1ffffff]
[    0.655297] pci 0000:00:1c.3:   bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[    0.655310] pci 0000:00:1e.0: PCI bridge to [bus 0d]
[    0.655335] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.655339] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.655343] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.655347] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[    0.655351] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[    0.655354] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff window]
[    0.655359] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.655363] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
[    0.655367] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.655371] pci_bus 0000:03: resource 0 [io  0x4000-0x4fff]
[    0.655375] pci_bus 0000:03: resource 1 [mem 0xf2500000-0xf25fffff]
[    0.655379] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.655383] pci_bus 0000:05: resource 0 [io  0x2000-0x2fff]
[    0.655387] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[    0.655390] pci_bus 0000:05: resource 2 [mem 0xf2900000-0xf29fffff 64bit pref]
[    0.655395] pci_bus 0000:0d: resource 4 [io  0x0000-0x0cf7 window]
[    0.655399] pci_bus 0000:0d: resource 5 [io  0x0d00-0xffff window]
[    0.655403] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.655406] pci_bus 0000:0d: resource 7 [mem 0x000d4000-0x000d7fff window]
[    0.655410] pci_bus 0000:0d: resource 8 [mem 0x000d8000-0x000dbfff window]
[    0.655414] pci_bus 0000:0d: resource 9 [mem 0xc0000000-0xfebfffff window]
[    0.655727] NET: Registered protocol family 2
[    0.656329] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.656855] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.657500] TCP: Hash tables configured (established 65536 bind 65536)
[    0.657656] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.657779] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.658017] NET: Registered protocol family 1
[    0.658059] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.661812] PCI: CLS 64 bytes, default 64
[    0.661963] Unpacking initramfs...
[    1.756086] Freeing initrd memory: 20428K
[    1.756249] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.756257] software IO TLB [mem 0xb94a1000-0xbd4a1000] (64MB) mapped at [ffff97a8394a1000-ffff97a83d4a0fff]
[    1.758123] audit: initializing netlink subsys (disabled)
[    1.758231] audit: type=2000 audit(1515522926.507:1): state=initialized audit_enabled=0 res=1
[    1.759089] Initialise system trusted keyrings
[    1.759223] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    1.763857] zbud: loaded
[    1.765727] SELinux:  Registering netfilter hooks
[    1.954804] NET: Registered protocol family 38
[    1.954812] Key type asymmetric registered
[    1.954815] Asymmetric key parser 'x509' registered
[    1.954883] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.954976] io scheduler noop registered
[    1.954979] io scheduler deadline registered
[    1.955094] io scheduler cfq registered (default)
[    1.955097] io scheduler mq-deadline registered
[    1.955258] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    1.957141] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[    1.957196] pcieport 0000:00:1c.1: Signaling PME with IRQ 25
[    1.957247] pcieport 0000:00:1c.3: Signaling PME with IRQ 26
[    1.957305] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
[    1.957391] pciehp 0000:00:1c.1:pcie004: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
[    1.957463] pciehp 0000:00:1c.3:pcie004: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
[    1.957597] intel_idle: does not run on family 6 model 23
[    1.957949] ACPI: AC Adapter [AC] (off-line)
[    1.958328] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.958523] ACPI: Lid Switch [LID]
[    1.958633] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.958639] ACPI: Sleep Button [SLPB]
[    1.958779] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.958806] ACPI: Power Button [PWRF]
[    1.959963] Monitor-Mwait will be used to enter C-1 state
[    1.959975] Monitor-Mwait will be used to enter C-2 state
[    1.959983] Monitor-Mwait will be used to enter C-3 state
[    1.959989] sched_clock: Marking unstable (1709999328, 249778972)<-(2100548097, -140769797)
[    1.959994] tsc: Marking TSC unstable due to TSC halts in idle
[    1.965555] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.966259] thermal LNXTHERM:00: registered as thermal_zone0
[    1.966262] ACPI: Thermal Zone [THM0] (28 C)
[    1.969586] thermal LNXTHERM:01: registered as thermal_zone1
[    1.969589] ACPI: Thermal Zone [THM1] (30 C)
[    1.969724] GHES: HEST is not enabled!
[    1.970113] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.996905] 0000:00:03.3: ttyS4 at I/O 0x1830 (irq = 17, base_baud = 115200) is a 16550A
[    1.997626] random: fast init done
[    1.997950] Non-volatile memory driver v1.3
[    1.998079] Linux agpgart interface v0.103
[    1.999160] ahci 0000:00:1f.2: version 3.0
[    1.999662] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.999709] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    1.999717] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs 
[    2.001397] scsi host0: ahci
[    2.001799] scsi host1: ahci
[    2.002136] scsi host2: ahci
[    2.002492] scsi host3: ahci
[    2.002618] ata1: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826100 irq 27
[    2.002623] ata2: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826180 irq 27
[    2.002625] ata3: DUMMY
[    2.002627] ata4: DUMMY
[    2.002971] libphy: Fixed MDIO Bus: probed
[    2.003176] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.003221] ehci-pci: EHCI PCI platform driver
[    2.003565] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    2.003811] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    2.003836] ehci-pci 0000:00:1a.7: debug port 1
[    2.006711] ACPI: Battery Slot [BAT0] (battery present)
[    2.007834] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    2.007876] ehci-pci 0000:00:1a.7: irq 23, io mem 0xf2826c00
[    2.014833] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    2.014948] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.014953] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.014957] usb usb1: Product: EHCI Host Controller
[    2.014961] usb usb1: Manufacturer: Linux 4.11.12-100.fc24.x86_64 ehci_hcd
[    2.014964] usb usb1: SerialNumber: 0000:00:1a.7
[    2.015322] hub 1-0:1.0: USB hub found
[    2.015342] hub 1-0:1.0: 6 ports detected
[    2.016343] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    2.016469] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    2.016492] ehci-pci 0000:00:1d.7: debug port 1
[    2.020437] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    2.020461] ehci-pci 0000:00:1d.7: irq 19, io mem 0xf2827000
[    2.027940] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.028092] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.028097] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.028101] usb usb2: Product: EHCI Host Controller
[    2.028105] usb usb2: Manufacturer: Linux 4.11.12-100.fc24.x86_64 ehci_hcd
[    2.028108] usb usb2: SerialNumber: 0000:00:1d.7
[    2.028475] hub 2-0:1.0: USB hub found
[    2.028495] hub 2-0:1.0: 6 ports detected
[    2.029280] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.029297] ohci-pci: OHCI PCI platform driver
[    2.029331] uhci_hcd: USB Universal Host Controller Interface driver
[    2.029607] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    2.029741] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    2.029756] uhci_hcd 0000:00:1a.0: detected 2 ports
[    2.029824] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
[    2.029946] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.029950] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.029954] usb usb3: Product: UHCI Host Controller
[    2.029958] usb usb3: Manufacturer: Linux 4.11.12-100.fc24.x86_64 uhci_hcd
[    2.029961] usb usb3: SerialNumber: 0000:00:1a.0
[    2.030260] hub 3-0:1.0: USB hub found
[    2.030279] hub 3-0:1.0: 2 ports detected
[    2.030810] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    2.030935] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    2.030949] uhci_hcd 0000:00:1a.1: detected 2 ports
[    2.030992] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[    2.031111] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.031115] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.031119] usb usb4: Product: UHCI Host Controller
[    2.031123] usb usb4: Manufacturer: Linux 4.11.12-100.fc24.x86_64 uhci_hcd
[    2.031126] usb usb4: SerialNumber: 0000:00:1a.1
[    2.031427] hub 4-0:1.0: USB hub found
[    2.031445] hub 4-0:1.0: 2 ports detected
[    2.031990] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    2.032129] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    2.032142] uhci_hcd 0000:00:1a.2: detected 2 ports
[    2.032190] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
[    2.032308] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.032313] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.032317] usb usb5: Product: UHCI Host Controller
[    2.032321] usb usb5: Manufacturer: Linux 4.11.12-100.fc24.x86_64 uhci_hcd
[    2.032324] usb usb5: SerialNumber: 0000:00:1a.2
[    2.032635] hub 5-0:1.0: USB hub found
[    2.032653] hub 5-0:1.0: 2 ports detected
[    2.033177] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.033307] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    2.033320] uhci_hcd 0000:00:1d.0: detected 2 ports
[    2.033363] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
[    2.033494] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.033499] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.033503] usb usb6: Product: UHCI Host Controller
[    2.033506] usb usb6: Manufacturer: Linux 4.11.12-100.fc24.x86_64 uhci_hcd
[    2.033510] usb usb6: SerialNumber: 0000:00:1d.0
[    2.033839] hub 6-0:1.0: USB hub found
[    2.033858] hub 6-0:1.0: 2 ports detected
[    2.034357] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.034482] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    2.034495] uhci_hcd 0000:00:1d.1: detected 2 ports
[    2.034537] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
[    2.034659] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    2.034664] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.034668] usb usb7: Product: UHCI Host Controller
[    2.034671] usb usb7: Manufacturer: Linux 4.11.12-100.fc24.x86_64 uhci_hcd
[    2.034675] usb usb7: SerialNumber: 0000:00:1d.1
[    2.034987] hub 7-0:1.0: USB hub found
[    2.035005] hub 7-0:1.0: 2 ports detected
[    2.035539] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.035689] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    2.035703] uhci_hcd 0000:00:1d.2: detected 2 ports
[    2.035745] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
[    2.035893] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    2.035897] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.035901] usb usb8: Product: UHCI Host Controller
[    2.035905] usb usb8: Manufacturer: Linux 4.11.12-100.fc24.x86_64 uhci_hcd
[    2.035908] usb usb8: SerialNumber: 0000:00:1d.2
[    2.036214] hub 8-0:1.0: USB hub found
[    2.036232] hub 8-0:1.0: 2 ports detected
[    2.036671] usbcore: registered new interface driver usbserial
[    2.036698] usbcore: registered new interface driver usbserial_generic
[    2.036714] usbserial: USB Serial support registered for generic
[    2.036822] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    2.048110] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.048122] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.048428] mousedev: PS/2 mouse device common for all mice
[    2.048883] rtc_cmos 00:02: RTC can wake from S4
[    2.049179] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    2.049229] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.049410] device-mapper: uevent: version 1.0.3
[    2.049655] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    2.050829] hidraw: raw HID events driver (C) Jiri Kosina
[    2.050932] usbcore: registered new interface driver usbhid
[    2.050934] usbhid: USB HID core driver
[    2.051203] drop_monitor: Initializing network drop monitor service
[    2.051404] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.051531] Initializing XFRM netlink socket
[    2.051967] NET: Registered protocol family 10
[    2.054765] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.059482] Segment Routing with IPv6
[    2.059543] mip6: Mobile IPv6
[    2.059549] NET: Registered protocol family 17
[    2.060110] microcode: sig=0x10676, pf=0x80, revision=0x610
[    2.060239] microcode: Microcode Update Driver: v2.2.
[    2.060636] registered taskstats version 1
[    2.060681] Loading compiled-in X.509 certificates
[    2.068201] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    2.071535] Loaded X.509 cert 'Fedora kernel signing key: 0389d6580c9f74371de9ab1a5f33e2c290a00459'
[    2.071605] zswap: loaded using pool lzo/zbud
[    2.078112] Key type big_key registered
[    2.083672] Key type encrypted registered
[    2.084374]   Magic number: 2:583:594
[    2.084671] rtc_cmos 00:02: setting system clock to 2018-01-09 18:35:28 UTC (1515522928)
[    2.084922] PM: Hibernation image not present or could not be loaded.
[    2.314024] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.316831] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    2.316840] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.316844] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.321311] ata1.00: ATA-9: WDC WDS120G1G0A-00SS50, Z3311000, max UDMA/133
[    2.321317] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.327623] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    2.327630] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.327635] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.329856] usb 1-5: new high-speed USB device number 2 using ehci-pci
[    2.333986] ata1.00: configured for UDMA/133
[    2.334562] scsi 0:0:0:0: Direct-Access     ATA      WDC WDS120G1G0A- 1000 PQ: 0 ANSI: 5
[    2.335276] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.335488] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    2.335559] sd 0:0:0:0: [sda] Write Protect is off
[    2.335565] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.335675] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.336980]  sda: sda1 sda2
[    2.338068] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.448367] usb 1-5: New USB device found, idVendor=17ef, idProduct=1005
[    2.448373] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.448909] hub 1-5:1.0: USB hub found
[    2.449067] hub 1-5:1.0: 4 ports detected
[    2.642141] ata2: SATA link down (SStatus 0 SControl 300)
[    2.648549] Freeing unused kernel memory: 2124K
[    2.648553] Write protecting the kernel read-only data: 14336k
[    2.650390] Freeing unused kernel memory: 1524K
[    2.654621] Freeing unused kernel memory: 492K
[    2.661733] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.661750] rodata_test: all tests were successful
[    2.677652] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    2.678083] systemd[1]: Detected architecture x86-64.
[    2.678090] systemd[1]: Running in initial RAM disk.
[    2.678138] systemd[1]: Set hostname to <ThinkpadX200.localdomain>.
[    2.777822] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2096f7108de, max_idle_ns: 440795221367 ns
[    2.791640] systemd[1]: Reached target Timers.
[    2.791918] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.791963] systemd[1]: Reached target Swap.
[    2.792050] systemd[1]: Listening on udev Kernel Socket.
[    2.792095] systemd[1]: Reached target Local File Systems.
[    2.793369] systemd[1]: Created slice System Slice.
[    2.801244] vboxdrv: loading out-of-tree module taints kernel.
[    2.802047] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    2.804288] vboxdrv: Found 2 processor cores
[    2.810064] vboxdrv: fAsync=0 offMin=0x792 offMax=0x2497
[    2.829818] audit: type=1130 audit(1515522929.243:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.885662] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    2.903565] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5
[    2.925611] audit: type=1130 audit(1515522929.339:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.929650] vboxdrv: TSC mode is Synchronous, tentative frequency 2260997962 Hz
[    2.929654] vboxdrv: Successfully loaded version 5.1.26 (interface 0x002a0000)
[    2.930661] VBoxNetFlt: Successfully started.
[    2.931433] VBoxNetAdp: Successfully started.
[    2.932172] VBoxPciLinuxInit
[    2.932184] vboxpci: IOMMU not found (not registered)
[    2.933977] audit: type=1130 audit(1515522929.348:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.950446] audit: type=1130 audit(1515522929.364:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.050720] audit: type=1130 audit(1515522929.464:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.219888] audit: type=1130 audit(1515522929.632:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.276372] audit: type=1130 audit(1515522929.689:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.317826] audit: type=1130 audit(1515522929.728:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.332839] audit: type=1130 audit(1515522929.745:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.674549] pps_core: LinuxPPS API ver. 1 registered
[    3.674553] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    3.703540] PTP clock support registered
[    3.709088] e1000e: Intel(R) PRO/1000 Network Driver - 3.4.0.2-NAPI
[    3.709091] e1000e: Copyright(c) 1999 - 2017 Intel Corporation.
[    3.709488] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    4.192918] pci 0000:00:00.0: Intel GM45 Chipset
[    4.192964] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    4.195125] pci 0000:00:00.0: detected 32768K stolen memory
[    4.196326] [drm] Memory usable by graphics device = 2048M
[    4.196332] [drm] Replacing VGA console driver
[    4.198731] Console: switching to colour dummy device 80x25
[    4.204925] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.204928] [drm] Driver supports precise vblank timestamp query.
[    4.207582] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.291880] [drm] RC6 disabled, disabling runtime PM support
[    4.293347] [drm] Initialized i915 1.6.0 20170123 for 0000:00:02.0 on minor 0
[    4.294457] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    4.299919] acpi device:01: registered as cooling_device2
[    4.300684] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    6.692823] fbcon: inteldrmfb (fb0) is primary device
[    7.199187] Console: switching to colour frame buffer device 160x50
[    7.223171] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    8.120308] kauditd_printk_skb: 1 callbacks suppressed
[    8.120313] audit: type=1130 audit(1515522934.533:12): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.325399] audit: type=1130 audit(1515522934.736:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.437861] audit: type=1130 audit(1515522934.850:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.474223] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    8.694562] audit: type=1130 audit(1515522935.108:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.694635] audit: type=1131 audit(1515522935.108:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.912844] audit: type=1130 audit(1515522935.325:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.938857] audit: type=1130 audit(1515522935.353:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.938929] audit: type=1131 audit(1515522935.353:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.941535] audit: type=1131 audit(1515522935.355:20): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.942818] audit: type=1130 audit(1515522935.356:21): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.025723] systemd-journald[156]: Received SIGTERM from PID 1 (systemd).
[    9.096553] systemd: 17 output lines suppressed due to ratelimiting
[    9.207501] SELinux: 32768 avtab hash slots, 106664 rules.
[    9.259069] SELinux: 32768 avtab hash slots, 106664 rules.
[    9.334875] SELinux:  8 users, 14 roles, 5064 types, 305 bools, 1 sens, 1024 cats
[    9.334884] SELinux:  94 classes, 106664 rules
[    9.346696] SELinux:  Permission validate_trans in class security not defined in policy.
[    9.346722] SELinux:  Permission module_load in class system not defined in policy.
[    9.347104] SELinux:  Class sctp_socket not defined in policy.
[    9.347106] SELinux:  Class icmp_socket not defined in policy.
[    9.347107] SELinux:  Class ax25_socket not defined in policy.
[    9.347110] SELinux:  Class ipx_socket not defined in policy.
[    9.347112] SELinux:  Class netrom_socket not defined in policy.
[    9.347114] SELinux:  Class atmpvc_socket not defined in policy.
[    9.347115] SELinux:  Class x25_socket not defined in policy.
[    9.347118] SELinux:  Class rose_socket not defined in policy.
[    9.347119] SELinux:  Class decnet_socket not defined in policy.
[    9.347121] SELinux:  Class atmsvc_socket not defined in policy.
[    9.347123] SELinux:  Class rds_socket not defined in policy.
[    9.347125] SELinux:  Class irda_socket not defined in policy.
[    9.347127] SELinux:  Class pppox_socket not defined in policy.
[    9.347129] SELinux:  Class llc_socket not defined in policy.
[    9.347130] SELinux:  Class can_socket not defined in policy.
[    9.347132] SELinux:  Class tipc_socket not defined in policy.
[    9.347134] SELinux:  Class bluetooth_socket not defined in policy.
[    9.347136] SELinux:  Class iucv_socket not defined in policy.
[    9.347138] SELinux:  Class rxrpc_socket not defined in policy.
[    9.347140] SELinux:  Class isdn_socket not defined in policy.
[    9.347142] SELinux:  Class phonet_socket not defined in policy.
[    9.347144] SELinux:  Class ieee802154_socket not defined in policy.
[    9.347145] SELinux:  Class caif_socket not defined in policy.
[    9.347147] SELinux:  Class alg_socket not defined in policy.
[    9.347149] SELinux:  Class nfc_socket not defined in policy.
[    9.347151] SELinux:  Class vsock_socket not defined in policy.
[    9.347153] SELinux:  Class kcm_socket not defined in policy.
[    9.347155] SELinux:  Class qipcrtr_socket not defined in policy.
[    9.347157] SELinux:  Class smc_socket not defined in policy.
[    9.347159] SELinux: the above unknown classes and permissions will be allowed
[    9.347176] SELinux:  Completing initialization.
[    9.347177] SELinux:  Setting up existing superblocks.
[    9.386471] systemd[1]: Successfully loaded SELinux policy in 221.342ms.
[    9.477146] systemd[1]: Relabelled /dev and /run in 63.764ms.
[    9.872399] EXT4-fs (dm-0): re-mounted. Opts: (null)
[   10.127630] systemd-journald[539]: Received request to flush runtime journal from PID 1
[   10.132683] systemd-journald[539]: File /var/log/journal/aaf59fe2ef994d4a9b8851fa01810c49/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   10.809749] wmi: Mapper loaded
[   10.844157] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.982624] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\_SB.PCI0.LPC.PMIO) (20170119/utaddress-247)
[   10.982634] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.982643] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\_SB.PCI0.LPC.LPIO) (20170119/utaddress-247)
[   10.982648] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.982656] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011FF (\_SB.PCI0.LPC.LPIO) (20170119/utaddress-247)
[   10.982661] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.982662] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.983497] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[   10.983498] thinkpad_acpi: http://ibm-acpi.sf.net/
[   10.983499] thinkpad_acpi: ThinkPad BIOS 6DET72WW (3.22 ), EC 7XHT25WW-1.07
[   10.983500] thinkpad_acpi: Lenovo ThinkPad X200, model 7459LB6
[   10.985522] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[   11.043703] thinkpad_acpi: radio switch found; radios are enabled
[   11.043730] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[   11.043730] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[   11.059046] Intel(R) Wireless WiFi driver for Linux
[   11.059047] Copyright(c) 2003- 2015 Intel Corporation
[   11.069936] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[   11.075640] iwlwifi 0000:03:00.0: loaded firmware version 17.459231.0 op_mode iwlmvm
[   11.076485] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[   11.109486] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   11.227530] snd_hda_codec_conexant hdaudioC0D0: CX20561 (Hermosa): BIOS auto-probing.
[   11.228700] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20561 (Hermosa): line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
[   11.228702] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.228704] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=2 (0x19/0x16/0x0/0x0/0x0)
[   11.228705] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[   11.228706] snd_hda_codec_conexant hdaudioC0D0:    dig-out=0x1c/0x0
[   11.228708] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[   11.228710] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x18
[   11.228711] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x1d
[   11.228713] snd_hda_codec_conexant hdaudioC0D0:      Dock Mic=0x17
[   11.232240] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[   11.250215] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[   11.252395] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   11.252499] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   11.252568] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   11.252640] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   11.252729] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   11.253399] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   11.418780] intel_powerclamp: No package C-state available
[   11.463631] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[   11.473704] Adding 8126460k swap on /dev/mapper/fedora-swap.  Priority:-1 extents:1 across:8126460k SSFS
[   11.505618] iTCO_vendor_support: vendor-support=0
[   11.508827] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   11.508881] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060)
[   11.509311] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   11.617517] iwlwifi 0000:03:00.0 wls1: renamed from wlan0
[   12.333700] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   12.342325] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[   12.741580] Bluetooth: Core ver 2.22
[   12.741689] NET: Registered protocol family 31
[   12.741690] Bluetooth: HCI device and connection manager initialized
[   12.741695] Bluetooth: HCI socket layer initialized
[   12.741698] Bluetooth: L2CAP socket layer initialized
[   12.741709] Bluetooth: SCO socket layer initialized
[   13.872844] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   13.934456] Ebtables v2.0 registered
[   14.063531] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[   14.176582] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[   14.182274] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   14.185158] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   14.395941] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   14.396199] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   14.411902] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[   14.559030] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[   14.643450] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   14.693450] Netfilter messages via NETLINK v0.30.
[   14.703250] ip_set: protocol 6
[   14.872298] thinkpad_ec: thinkpad_ec 0.42 loaded.
[   14.874296] tp_smapi 0.42 loading...
[   14.874445] tp_smapi successfully loaded (smapi_port=0xb2).
[   40.531907] ACPI: \_SB_.GDCK: undocking
[   40.993971] usb 1-5: USB disconnect, device number 2
[   43.980533] ACPI: \_SB_.GDCK: undocking
[   43.994398] [drm:intel_dp_aux_ch [i915]] *ERROR* dp_aux_ch not done status 0x01450085
[   72.453836] random: crng init done
[   81.080944] systemd-journald[539]: File /var/log/journal/aaf59fe2ef994d4a9b8851fa01810c49/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[   81.519028] fuse init (API version 7.26)
[   82.942008] wls1: authenticate with e4:f4:c6:01:62:69
[   82.947300] wls1: send auth to e4:f4:c6:01:62:69 (try 1/3)
[   82.951595] wls1: authenticated
[   82.951852] iwlwifi 0000:03:00.0 wls1: disabling HT as WMM/QoS is not supported by the AP
[   82.951854] iwlwifi 0000:03:00.0 wls1: disabling VHT as WMM/QoS is not supported by the AP
[   82.952812] wls1: associate with e4:f4:c6:01:62:69 (try 1/3)
[   82.955381] wls1: RX AssocResp from e4:f4:c6:01:62:69 (capab=0x1411 status=0 aid=8)
[   82.963844] wls1: associated
[   82.963900] IPv6: ADDRCONF(NETDEV_CHANGE): wls1: link becomes ready
[ 7469.870737] wls1: deauthenticating from e4:f4:c6:01:62:69 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 7469.876628] iwlwifi 0000:03:00.0: Failed to find station
[ 7469.876635] wls1: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
[ 7469.882391] iwlwifi 0000:03:00.0: Failed to find station
[ 7469.882397] wls1: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22)
[ 7470.404508] PM: Syncing filesystems ... done.
[ 7470.414743] PM: Preparing system for sleep (mem)
[ 7470.415822] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 7470.417316] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 7470.418553] PM: Suspending system (mem)
[ 7470.418579] Suspending console(s) (use no_console_suspend to debug)
[ 7470.419135] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 7470.419811] sd 0:0:0:0: [sda] Stopping disk
[ 7470.438350] ACPI : EC: event blocked
[ 7470.747934] PM: suspend of devices complete after 328.978 msecs
[ 7470.747935] PM: suspend devices took 0.330 seconds
[ 7470.759888] PM: late suspend of devices complete after 11.948 msecs
[ 7470.760164] ACPI : EC: interrupt blocked
[ 7470.760443] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[ 7470.760547] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[ 7470.760982] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[ 7470.761057] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[ 7470.761841] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[ 7470.773812] PM: noirq suspend of devices complete after 13.920 msecs
[ 7470.774181] ACPI: Preparing to enter system sleep state S3
[ 7470.789567] ACPI : EC: EC stopped
[ 7470.789567] PM: Saving platform NVS memory
[ 7470.789580] Disabling non-boot CPUs ...
[ 7470.790084] Broke affinity for irq 1
[ 7470.790091] Broke affinity for irq 9
[ 7470.790095] Broke affinity for irq 12
[ 7470.790102] Broke affinity for irq 17
[ 7470.790125] Broke affinity for irq 23
[ 7470.790130] Broke affinity for irq 27
[ 7470.790132] Broke affinity for irq 28
[ 7470.790133] Broke affinity for irq 30
[ 7470.791161] smpboot: CPU 1 is now offline
[ 7470.791303] ACPI: Low-level resume complete
[ 7470.791303] ACPI : EC: EC started
[ 7470.791303] PM: Restoring platform NVS memory
[ 7470.791303] Suspended for 175.793 seconds
[ 7470.791303] Enabling non-boot CPUs ...
[ 7470.791303] x86: Booting SMP configuration:
[ 7470.791303] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 7470.790986] Disabled fast string operations
[ 7470.822763]  cache: parent cpu1 should not be sleeping
[ 7470.845802] CPU1 is up
[ 7470.847781] ACPI: Waking up from system sleep state S3
[ 7470.875266] ACPI : EC: interrupt unblocked
[ 7470.888966] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[ 7470.889000] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[ 7470.889036] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[ 7470.904867] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 7470.904897] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 7470.904950] PM: noirq resume of devices complete after 29.844 msecs
[ 7470.905293] PM: early resume of devices complete after 0.292 msecs
[ 7470.908346] usb usb3: root hub lost power or was reset
[ 7470.908360] usb usb4: root hub lost power or was reset
[ 7470.908398] usb usb5: root hub lost power or was reset
[ 7470.908520] usb usb6: root hub lost power or was reset
[ 7470.908537] usb usb7: root hub lost power or was reset
[ 7470.908574] usb usb8: root hub lost power or was reset
[ 7470.908774] ACPI : EC: event unblocked
[ 7470.908982] sd 0:0:0:0: [sda] Starting disk
[ 7470.909184] rtc_cmos 00:02: System wakeup disabled by ACPI
[ 7470.909968] pciehp 0000:00:1c.1:pcie004: Timeout on hotplug command 0x1038 (issued 7468953 msec ago)
[ 7470.909979] pciehp 0000:00:1c.0:pcie004: Timeout on hotplug command 0x1038 (issued 7468953 msec ago)
[ 7470.909995] pciehp 0000:00:1c.3:pcie004: Timeout on hotplug command 0x1038 (issued 7468953 msec ago)
[ 7471.017817] pciehp 0000:00:1c.1:pcie004: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add
[ 7471.017819] pciehp 0000:00:1c.1:pcie004: Cannot add device at 0000:03:00
[ 7471.215076] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7471.215101] ata2: SATA link down (SStatus 0 SControl 300)
[ 7471.217561] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 7471.217563] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 7471.217565] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 7471.228577] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 7471.228579] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 7471.228581] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 7471.234960] ata1.00: configured for UDMA/133
[ 7472.081146] PM: resume of devices complete after 1175.848 msecs
[ 7472.081459] PM: resume devices took 1.176 seconds
[ 7472.081475] PM: Finishing wakeup.
[ 7472.081477] ACPI: \_SB_.GDCK: docking
[ 7472.081477] Restarting tasks ... done.
[ 7472.138614] video LNXVIDEO:00: Restoring backlight state
[ 7472.147048] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[ 7472.149030] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 7472.149290] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 7472.329974] ACPI: \_SB_.GDCK: Unable to dock!
[ 7472.354846] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 7472.355116] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 7472.368707] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[ 7472.420079] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[ 7477.791704] wls1: authenticate with e4:f4:c6:01:62:69
[ 7477.798428] wls1: send auth to e4:f4:c6:01:62:69 (try 1/3)
[ 7477.801967] wls1: authenticated
[ 7477.802141] iwlwifi 0000:03:00.0 wls1: disabling HT as WMM/QoS is not supported by the AP
[ 7477.802143] iwlwifi 0000:03:00.0 wls1: disabling VHT as WMM/QoS is not supported by the AP
[ 7477.802800] wls1: associate with e4:f4:c6:01:62:69 (try 1/3)
[ 7477.805337] wls1: RX AssocResp from e4:f4:c6:01:62:69 (capab=0x1411 status=0 aid=8)
[ 7477.814597] wls1: associated
[ 7477.814656] IPv6: ADDRCONF(NETDEV_CHANGE): wls1: link becomes ready
[ 8020.920406] wls1: deauthenticating from e4:f4:c6:01:62:69 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 8020.927554] iwlwifi 0000:03:00.0: Failed to find station
[ 8020.927560] wls1: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22)
[ 8021.456470] PM: Syncing filesystems ... done.
[ 8021.493851] PM: Preparing system for sleep (mem)
[ 8021.495087] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 8021.496632] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 8021.497979] PM: Suspending system (mem)
[ 8021.498009] Suspending console(s) (use no_console_suspend to debug)
[ 8021.498531] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 8021.499039] sd 0:0:0:0: [sda] Stopping disk
[ 8021.515648] ACPI : EC: event blocked
[ 8021.817035] PM: suspend of devices complete after 318.650 msecs
[ 8021.817036] PM: suspend devices took 0.319 seconds
[ 8021.828904] PM: late suspend of devices complete after 11.863 msecs
[ 8021.829186] ACPI : EC: interrupt blocked
[ 8021.829346] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[ 8021.829496] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[ 8021.829895] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[ 8021.829978] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[ 8021.830512] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[ 8021.842360] PM: noirq suspend of devices complete after 13.452 msecs
[ 8021.842730] ACPI: Preparing to enter system sleep state S3
[ 8021.856932] ACPI : EC: EC stopped
[ 8021.856933] PM: Saving platform NVS memory
[ 8021.856946] Disabling non-boot CPUs ...
[ 8021.857403] Broke affinity for irq 1
[ 8021.857410] Broke affinity for irq 9
[ 8021.857414] Broke affinity for irq 12
[ 8021.857421] Broke affinity for irq 17
[ 8021.857445] Broke affinity for irq 23
[ 8021.857450] Broke affinity for irq 27
[ 8021.857451] Broke affinity for irq 28
[ 8021.857453] Broke affinity for irq 30
[ 8021.858481] smpboot: CPU 1 is now offline
[ 8021.858797] ACPI: Low-level resume complete
[ 8021.858797] ACPI : EC: EC started
[ 8021.858797] PM: Restoring platform NVS memory
[ 8021.858797] Suspended for 6607.932 seconds
[ 8021.858797] Enabling non-boot CPUs ...
[ 8021.858797] x86: Booting SMP configuration:
[ 8021.858797] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 8021.857788] Disabled fast string operations
[ 8021.894758]  cache: parent cpu1 should not be sleeping
[ 8021.912526] CPU1 is up
[ 8021.914416] ACPI: Waking up from system sleep state S3
[ 8022.068727] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[ 8022.068791] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[ 8022.068792] ACPI : EC: interrupt unblocked
[ 8022.072912] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[ 8022.083913] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 8022.088901] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 8022.088935] PM: noirq resume of devices complete after 21.276 msecs
[ 8022.089227] PM: early resume of devices complete after 0.259 msecs
[ 8022.092316] usb usb3: root hub lost power or was reset
[ 8022.092331] usb usb4: root hub lost power or was reset
[ 8022.092377] usb usb5: root hub lost power or was reset
[ 8022.092517] usb usb6: root hub lost power or was reset
[ 8022.092568] usb usb7: root hub lost power or was reset
[ 8022.092576] usb usb8: root hub lost power or was reset
[ 8022.092835] ACPI : EC: event unblocked
[ 8022.093134] sd 0:0:0:0: [sda] Starting disk
[ 8022.093197] rtc_cmos 00:02: System wakeup disabled by ACPI
[ 8022.093837] pciehp 0000:00:1c.3:pcie004: Timeout on hotplug command 0x1038 (issued 551184 msec ago)
[ 8022.093850] pciehp 0000:00:1c.1:pcie004: Timeout on hotplug command 0x1038 (issued 551184 msec ago)
[ 8022.093860] pciehp 0000:00:1c.0:pcie004: Timeout on hotplug command 0x1038 (issued 551184 msec ago)
[ 8022.201840] pciehp 0000:00:1c.1:pcie004: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add
[ 8022.201842] pciehp 0000:00:1c.1:pcie004: Cannot add device at 0000:03:00
[ 8022.399244] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8022.399310] ata2: SATA link down (SStatus 0 SControl 300)
[ 8022.401746] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 8022.401749] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 8022.401751] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 8022.412752] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 8022.412754] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 8022.412756] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 8022.419134] ata1.00: configured for UDMA/133
[ 8023.145824] PM: resume of devices complete after 1056.592 msecs
[ 8023.146227] PM: resume devices took 1.057 seconds
[ 8023.146254] PM: Finishing wakeup.
[ 8023.146255] Restarting tasks ... 
[ 8023.146264] ACPI: \_SB_.GDCK: docking
[ 8023.265553] done.
[ 8023.311832] usb 1-5: new high-speed USB device number 3 using ehci-pci
[ 8023.323294] video LNXVIDEO:00: Restoring backlight state
[ 8023.331893] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[ 8023.334689] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 8023.334969] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 8023.430251] usb 1-5: New USB device found, idVendor=17ef, idProduct=1005
[ 8023.430255] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 8023.430918] hub 1-5:1.0: USB hub found
[ 8023.430996] hub 1-5:1.0: 4 ports detected
[ 8023.514293] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xe frozen
[ 8023.514299] ata2: ACPI event
[ 8023.524381] ata2: hard resetting link
[ 8023.538833] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 8023.539102] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 8023.552708] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[ 8023.598316] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[ 8024.242881] ata2: SATA link down (SStatus 0 SControl 300)
[ 8024.242904] ata2: EH complete
[ 8028.973538] wls1: authenticate with e4:f4:c6:01:62:69
[ 8028.978087] wls1: send auth to e4:f4:c6:01:62:69 (try 1/3)
[ 8028.980110] wls1: authenticated
[ 8028.982902] iwlwifi 0000:03:00.0 wls1: disabling HT as WMM/QoS is not supported by the AP
[ 8028.982905] iwlwifi 0000:03:00.0 wls1: disabling VHT as WMM/QoS is not supported by the AP
[ 8028.983811] wls1: associate with e4:f4:c6:01:62:69 (try 1/3)
[ 8028.986458] wls1: RX AssocResp from e4:f4:c6:01:62:69 (capab=0x1411 status=0 aid=5)
[ 8028.996681] wls1: associated
[ 8028.996746] IPv6: ADDRCONF(NETDEV_CHANGE): wls1: link becomes ready
[ 8300.888039] wls1: deauthenticating from e4:f4:c6:01:62:69 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 8300.894010] iwlwifi 0000:03:00.0: Failed to find station
[ 8300.894018] wls1: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22)
[ 8301.427350] PM: Syncing filesystems ... done.
[ 8301.443579] PM: Preparing system for sleep (mem)
[ 8301.444781] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 8301.445956] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[ 8301.446917] PM: Suspending system (mem)
[ 8301.446942] Suspending console(s) (use no_console_suspend to debug)
[ 8301.447505] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 8301.448452] sd 0:0:0:0: [sda] Stopping disk
[ 8301.463461] ACPI : EC: event blocked
[ 8301.762559] PM: suspend of devices complete after 315.243 msecs
[ 8301.762561] PM: suspend devices took 0.315 seconds
[ 8301.774896] PM: late suspend of devices complete after 12.332 msecs
[ 8301.775162] ACPI : EC: interrupt blocked
[ 8301.775434] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[ 8301.775530] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[ 8301.776042] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[ 8301.776228] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[ 8301.776304] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[ 8301.789178] PM: noirq suspend of devices complete after 14.278 msecs
[ 8301.789545] ACPI: Preparing to enter system sleep state S3
[ 8301.802609] ACPI : EC: EC stopped
[ 8301.802610] PM: Saving platform NVS memory
[ 8301.802623] Disabling non-boot CPUs ...
[ 8301.803136] Broke affinity for irq 1
[ 8301.803144] Broke affinity for irq 9
[ 8301.803147] Broke affinity for irq 12
[ 8301.803155] Broke affinity for irq 17
[ 8301.803178] Broke affinity for irq 23
[ 8301.803182] Broke affinity for irq 27
[ 8301.803184] Broke affinity for irq 28
[ 8301.803185] Broke affinity for irq 30
[ 8301.804208] smpboot: CPU 1 is now offline
[ 8301.804320] ACPI: Low-level resume complete
[ 8301.804320] ACPI : EC: EC started
[ 8301.804320] PM: Restoring platform NVS memory
[ 8301.804320] Suspended for 37845.054 seconds
[ 8301.804320] Enabling non-boot CPUs ...
[ 8301.804320] x86: Booting SMP configuration:
[ 8301.804320] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 8301.804108] Disabled fast string operations
[ 8301.834311]  cache: parent cpu1 should not be sleeping
[ 8301.852392] CPU1 is up
[ 8301.854295] ACPI: Waking up from system sleep state S3
[ 8301.881483] ACPI : EC: interrupt unblocked
[ 8301.894884] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[ 8301.894910] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[ 8301.894938] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[ 8301.910952] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 8301.910982] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 8301.911060] PM: noirq resume of devices complete after 29.748 msecs
[ 8301.911369] PM: early resume of devices complete after 0.238 msecs
[ 8301.911838] ACPI : button: The lid device is not compliant to SW_LID.
[ 8301.911886] ACPI : EC: event unblocked
[ 8301.913940] usb usb3: root hub lost power or was reset
[ 8301.913984] usb usb4: root hub lost power or was reset
[ 8301.914025] usb usb5: root hub lost power or was reset
[ 8301.914225] usb usb6: root hub lost power or was reset
[ 8301.914264] usb usb7: root hub lost power or was reset
[ 8301.914303] usb usb8: root hub lost power or was reset
[ 8301.914390] rtc_cmos 00:02: System wakeup disabled by ACPI
[ 8301.915625] sd 0:0:0:0: [sda] Starting disk
[ 8301.916799] pciehp 0000:00:1c.0:pcie004: Timeout on hotplug command 0x1038 (issued 279822 msec ago)
[ 8301.916812] pciehp 0000:00:1c.1:pcie004: Timeout on hotplug command 0x1038 (issued 279822 msec ago)
[ 8301.916822] pciehp 0000:00:1c.3:pcie004: Timeout on hotplug command 0x1038 (issued 279822 msec ago)
[ 8302.017823] pciehp 0000:00:1c.1:pcie004: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add
[ 8302.017824] pciehp 0000:00:1c.1:pcie004: Cannot add device at 0000:03:00
[ 8302.223192] ata2: SATA link down (SStatus 0 SControl 300)
[ 8302.223258] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8302.225759] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 8302.225762] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 8302.225764] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 8302.236771] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 8302.236773] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 8302.236776] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 8302.243152] ata1.00: configured for UDMA/133
[ 8303.097672] PM: resume of devices complete after 1186.298 msecs
[ 8303.098041] PM: resume devices took 1.187 seconds
[ 8303.098055] PM: Finishing wakeup.
[ 8303.098056] Restarting tasks ... done.
[ 8303.131277] video LNXVIDEO:00: Restoring backlight state
[ 8303.149613] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[ 8303.150831] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 8303.151088] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 8303.359117] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 8303.359369] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 8303.373198] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[ 8303.435901] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[ 8305.749876] ACPI: \_SB_.GDCK: undocking
[ 8305.961915] usb 1-5: USB disconnect, device number 3
[ 8331.521740] PM: Syncing filesystems ... done.
[ 8331.537701] PM: Preparing system for sleep (mem)
[ 8331.538580] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 8331.540190] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 8331.541443] PM: Suspending system (mem)
[ 8331.541464] Suspending console(s) (use no_console_suspend to debug)
[ 8331.541990] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 8331.542514] sd 0:0:0:0: [sda] Stopping disk
[ 8331.559006] ACPI : EC: event blocked
[ 8332.287261] PM: suspend of devices complete after 745.422 msecs
[ 8332.287262] PM: suspend devices took 0.746 seconds
[ 8332.298915] PM: late suspend of devices complete after 11.648 msecs
[ 8332.299187] ACPI : EC: interrupt blocked
[ 8332.299463] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[ 8332.299554] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[ 8332.300268] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[ 8332.300318] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[ 8332.300387] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[ 8332.312167] PM: noirq suspend of devices complete after 13.248 msecs
[ 8332.312536] ACPI: Preparing to enter system sleep state S3
[ 8332.324424] ACPI : EC: EC stopped
[ 8332.324425] PM: Saving platform NVS memory
[ 8332.324438] Disabling non-boot CPUs ...
[ 8332.324915] Broke affinity for irq 1
[ 8332.324922] Broke affinity for irq 9
[ 8332.324926] Broke affinity for irq 12
[ 8332.324933] Broke affinity for irq 17
[ 8332.324956] Broke affinity for irq 23
[ 8332.324961] Broke affinity for irq 27
[ 8332.324963] Broke affinity for irq 28
[ 8332.324964] Broke affinity for irq 30
[ 8332.325991] smpboot: CPU 1 is now offline
[ 8332.326110] ACPI: Low-level resume complete
[ 8332.326110] ACPI : EC: EC started
[ 8332.326110] PM: Restoring platform NVS memory
[ 8332.326110] Suspended for 250.478 seconds
[ 8332.326110] Enabling non-boot CPUs ...
[ 8332.326110] x86: Booting SMP configuration:
[ 8332.326110] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 8332.325785] Disabled fast string operations
[ 8332.359290]  cache: parent cpu1 should not be sleeping
[ 8332.377021] CPU1 is up
[ 8332.378909] ACPI: Waking up from system sleep state S3
[ 8332.405149] ACPI : EC: interrupt unblocked
[ 8332.418973] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[ 8332.418999] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[ 8332.419035] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[ 8332.434926] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 8332.434958] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 8332.435025] PM: noirq resume of devices complete after 30.045 msecs
[ 8332.435504] PM: early resume of devices complete after 0.402 msecs
[ 8332.435760] ACPI : EC: event unblocked
[ 8332.436092] usb usb3: root hub lost power or was reset
[ 8332.436160] usb usb4: root hub lost power or was reset
[ 8332.436201] usb usb5: root hub lost power or was reset
[ 8332.436445] usb usb6: root hub lost power or was reset
[ 8332.436488] usb usb7: root hub lost power or was reset
[ 8332.436529] usb usb8: root hub lost power or was reset
[ 8332.436873] rtc_cmos 00:02: System wakeup disabled by ACPI
[ 8332.438475] sd 0:0:0:0: [sda] Starting disk
[ 8332.438987] pciehp 0000:00:1c.3:pcie004: Timeout on hotplug command 0x1038 (issued 30523 msec ago)
[ 8332.439009] pciehp 0000:00:1c.1:pcie004: Timeout on hotplug command 0x1038 (issued 30523 msec ago)
[ 8332.439020] pciehp 0000:00:1c.0:pcie004: Timeout on hotplug command 0x1038 (issued 30523 msec ago)
[ 8332.545832] pciehp 0000:00:1c.1:pcie004: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add
[ 8332.545834] pciehp 0000:00:1c.1:pcie004: Cannot add device at 0000:03:00
[ 8332.743390] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8332.743466] ata2: SATA link down (SStatus 0 SControl 300)
[ 8332.745895] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 8332.745898] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 8332.745901] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 8332.756912] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 8332.756915] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 8332.756917] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 8332.763293] ata1.00: configured for UDMA/133
[ 8333.619301] PM: resume of devices complete after 1183.792 msecs
[ 8333.619706] PM: resume devices took 1.184 seconds
[ 8333.619722] PM: Finishing wakeup.
[ 8333.619724] Restarting tasks ... done.
[ 8333.651200] video LNXVIDEO:00: Restoring backlight state
[ 8333.666023] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[ 8333.668932] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 8333.669189] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 8333.858966] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 8333.859219] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 8333.874706] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[ 8333.929233] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[ 8349.329833] usb 2-2: new high-speed USB device number 2 using ehci-pci
[ 8349.454966] usb 2-2: New USB device found, idVendor=0b95, idProduct=1790
[ 8349.454970] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8349.454972] usb 2-2: Product: AX88179
[ 8349.454974] usb 2-2: Manufacturer: ASIX Elec. Corp.
[ 8349.454976] usb 2-2: SerialNumber: 000000000000ED
[ 8351.414445] ax88179_178a 2-2:1.0 eth0: register 'ax88179_178a' at usb-0000:00:1d.7-2, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:0e:c6:c1:dc:7c
[ 8351.414510] usbcore: registered new interface driver ax88179_178a
[ 8351.434436] ax88179_178a 2-2:1.0 enp0s29f7u2: renamed from eth0
[ 8351.446174] IPv6: ADDRCONF(NETDEV_UP): enp0s29f7u2: link is not ready
[ 8351.773991] IPv6: ADDRCONF(NETDEV_UP): enp0s29f7u2: link is not ready
[ 8354.239232] ax88179_178a 2-2:1.0 enp0s29f7u2: ax88179 - Link status is: 1
[ 8354.246227] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s29f7u2: link becomes ready
[ 8380.864081] ax88179_178a 2-2:1.0 enp0s29f7u2: ax88179 - Link status is: 0
[ 8406.976860] ax88179_178a 2-2:1.0 enp0s29f7u2: ax88179 - Link status is: 1
[ 8418.753211] ax88179_178a 2-2:1.0 enp0s29f7u2: ax88179 - Link status is: 0
[ 8436.930004] ax88179_178a 2-2:1.0 enp0s29f7u2: ax88179 - Link status is: 1
[ 8446.914317] ax88179_178a 2-2:1.0 enp0s29f7u2: ax88179 - Link status is: 0
[ 8462.402558] ax88179_178a 2-2:1.0 enp0s29f7u2: ax88179 - Link status is: 1
[ 8490.307434] ax88179_178a 2-2:1.0 enp0s29f7u2: ax88179 - Link status is: 0
[ 8504.387858] ax88179_178a 2-2:1.0 enp0s29f7u2: ax88179 - Link status is: 1
[ 8540.101005] ax88179_178a 2-2:1.0 enp0s29f7u2: ax88179 - Link status is: 0
[ 8547.269180] ax88179_178a 2-2:1.0 enp0s29f7u2: ax88179 - Link status is: 1
[ 8548.549237] ax88179_178a 2-2:1.0 enp0s29f7u2: ax88179 - Link status is: 0
[ 8592.454839] ax88179_178a 2-2:1.0 enp0s29f7u2: ax88179 - Link status is: 1
[ 8671.177059] ax88179_178a 2-2:1.0 enp0s29f7u2: ax88179 - Link status is: 0
[ 8677.321296] ax88179_178a 2-2:1.0 enp0s29f7u2: ax88179 - Link status is: 1
[ 8722.250602] ax88179_178a 2-2:1.0 enp0s29f7u2: ax88179 - Link status is: 0
[ 8722.272349] IPv6: ADDRCONF(NETDEV_UP): enp0s29f7u2: link is not ready
[ 8736.587118] ax88179_178a 2-2:1.0 enp0s29f7u2: ax88179 - Link status is: 1
[ 8736.594208] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s29f7u2: link becomes ready
[ 8754.891662] ax88179_178a 2-2:1.0 enp0s29f7u2: ax88179 - Link status is: 0
[ 8763.312482] usb 2-2: USB disconnect, device number 2
[ 8763.314896] ax88179_178a 2-2:1.0 enp0s29f7u2: unregister 'ax88179_178a' usb-0000:00:1d.7-2, ASIX AX88179 USB 3.0 Gigabit Ethernet
[ 8763.314933] ax88179_178a 2-2:1.0 enp0s29f7u2: Failed to read reg index 0x0002: -19
[ 8763.314939] ax88179_178a 2-2:1.0 enp0s29f7u2: Failed to write reg index 0x0002: -19
[ 8763.322651] ax88179_178a 2-2:1.0 enp0s29f7u2 (unregistered): Failed to write reg index 0x0002: -19
[ 8763.322654] ax88179_178a 2-2:1.0 enp0s29f7u2 (unregistered): Failed to write reg index 0x0001: -19
[ 8763.322657] ax88179_178a 2-2:1.0 enp0s29f7u2 (unregistered): Failed to write reg index 0x0002: -19
[ 8851.049859] usb 2-2: new high-speed USB device number 3 using ehci-pci
[ 8851.174345] usb 2-2: New USB device found, idVendor=0b95, idProduct=1790
[ 8851.174349] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8851.174351] usb 2-2: Product: AX88179
[ 8851.174353] usb 2-2: Manufacturer: ASIX Elec. Corp.
[ 8851.174354] usb 2-2: SerialNumber: 000000000000ED
[ 8851.508938] ax88179_178a 2-2:1.0 eth0: register 'ax88179_178a' at usb-0000:00:1d.7-2, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:0e:c6:c1:dc:7c
[ 8853.097973] ax88179_178a 2-2:1.0 enp0s29f7u2: renamed from eth0
[ 8853.117649] IPv6: ADDRCONF(NETDEV_UP): enp0s29f7u2: link is not ready
[ 8853.445618] IPv6: ADDRCONF(NETDEV_UP): enp0s29f7u2: link is not ready
[ 8855.320496] ax88179_178a 2-2:1.0 enp0s29f7u2: ax88179 - Link status is: 1
[ 8855.327350] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s29f7u2: link becomes ready
[ 9076.353058] ax88179_178a 2-2:1.0 enp0s29f7u2: ax88179 - Link status is: 0
[ 9079.086046] PM: Syncing filesystems ... done.
[ 9079.099757] PM: Preparing system for sleep (mem)
[ 9079.100763] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 9079.101905] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[ 9079.102874] PM: Suspending system (mem)
[ 9079.102900] Suspending console(s) (use no_console_suspend to debug)
[ 9079.103455] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 9079.103944] sd 0:0:0:0: [sda] Stopping disk
[ 9079.118653] ACPI : EC: event blocked
[ 9079.415613] PM: suspend of devices complete after 312.325 msecs
[ 9079.415616] PM: suspend devices took 0.312 seconds
[ 9079.427898] PM: late suspend of devices complete after 12.278 msecs
[ 9079.428165] ACPI : EC: interrupt blocked
[ 9079.428446] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[ 9079.428536] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[ 9079.429103] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[ 9079.429141] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[ 9079.429457] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[ 9079.441244] PM: noirq suspend of devices complete after 13.343 msecs
[ 9079.441615] ACPI: Preparing to enter system sleep state S3
[ 9079.453453] ACPI : EC: EC stopped
[ 9079.453454] PM: Saving platform NVS memory
[ 9079.453467] Disabling non-boot CPUs ...
[ 9079.454000] Broke affinity for irq 1
[ 9079.454007] Broke affinity for irq 9
[ 9079.454011] Broke affinity for irq 12
[ 9079.454018] Broke affinity for irq 17
[ 9079.454026] Broke affinity for irq 19
[ 9079.454041] Broke affinity for irq 23
[ 9079.454046] Broke affinity for irq 27
[ 9079.454047] Broke affinity for irq 28
[ 9079.454049] Broke affinity for irq 30
[ 9079.455070] smpboot: CPU 1 is now offline
[ 9079.455182] ACPI: Low-level resume complete
[ 9079.455182] ACPI : EC: EC started
[ 9079.455182] PM: Restoring platform NVS memory
[ 9079.455182] Suspended for 6718.870 seconds
[ 9079.455182] Enabling non-boot CPUs ...
[ 9079.455182] x86: Booting SMP configuration:
[ 9079.455182] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 9079.454972] Disabled fast string operations
[ 9079.486174] Monitor-Mwait will be used to enter C-3 state
[ 9079.490112]  cache: parent cpu1 should not be sleeping
[ 9079.509840] CPU1 is up
[ 9079.511798] ACPI: Waking up from system sleep state S3
[ 9079.528228] thinkpad_acpi: EC reports that Thermal Table has changed
[ 9079.667656] ACPI : EC: interrupt unblocked
[ 9079.680879] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[ 9079.680915] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[ 9079.680942] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[ 9079.696919] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 9079.696952] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 9079.696990] PM: noirq resume of devices complete after 29.500 msecs
[ 9079.697362] PM: early resume of devices complete after 0.293 msecs
[ 9079.697762] usb usb3: root hub lost power or was reset
[ 9079.697842] usb usb4: root hub lost power or was reset
[ 9079.697885] usb usb5: root hub lost power or was reset
[ 9079.698127] usb usb6: root hub lost power or was reset
[ 9079.698171] usb usb7: root hub lost power or was reset
[ 9079.698211] usb usb8: root hub lost power or was reset
[ 9079.698481] ACPI : EC: event unblocked
[ 9079.698992] rtc_cmos 00:02: System wakeup disabled by ACPI
[ 9079.700137] pciehp 0000:00:1c.1:pcie004: Timeout on hotplug command 0x1038 (issued 747261 msec ago)
[ 9079.700148] pciehp 0000:00:1c.0:pcie004: Timeout on hotplug command 0x1038 (issued 747261 msec ago)
[ 9079.700284] sd 0:0:0:0: [sda] Starting disk
[ 9079.700314] pciehp 0000:00:1c.3:pcie004: Timeout on hotplug command 0x1038 (issued 747261 msec ago)
[ 9079.801824] pciehp 0000:00:1c.1:pcie004: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add
[ 9079.801826] pciehp 0000:00:1c.1:pcie004: Cannot add device at 0000:03:00
[ 9080.007017] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9080.007068] ata2: SATA link down (SStatus 0 SControl 300)
[ 9080.009506] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 9080.009508] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 9080.009510] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 9080.020520] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 9080.020522] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 9080.020523] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 9080.026898] ata1.00: configured for UDMA/133
[ 9082.018797] PM: resume of devices complete after 2321.431 msecs
[ 9082.019122] PM: resume devices took 2.322 seconds
[ 9082.019145] PM: Finishing wakeup.
[ 9082.019146] Restarting tasks ... 
[ 9082.019150] ACPI: \_SB_.GDCK: docking
[ 9082.023205] done.
[ 9082.024461] usb 2-2: USB disconnect, device number 3
[ 9082.024638] ax88179_178a 2-2:1.0 enp0s29f7u2: unregister 'ax88179_178a' usb-0000:00:1d.7-2, ASIX AX88179 USB 3.0 Gigabit Ethernet
[ 9082.024655] ax88179_178a 2-2:1.0 enp0s29f7u2: Failed to read reg index 0x0002: -19
[ 9082.024657] ax88179_178a 2-2:1.0 enp0s29f7u2: Failed to write reg index 0x0002: -19
[ 9082.030870] ax88179_178a 2-2:1.0 enp0s29f7u2 (unregistered): Failed to write reg index 0x0002: -19
[ 9082.030874] ax88179_178a 2-2:1.0 enp0s29f7u2 (unregistered): Failed to write reg index 0x0001: -19
[ 9082.030876] ax88179_178a 2-2:1.0 enp0s29f7u2 (unregistered): Failed to write reg index 0x0002: -19
[ 9082.180806] usb 1-5: new high-speed USB device number 4 using ehci-pci
[ 9082.183572] video LNXVIDEO:00: Restoring backlight state
[ 9082.200110] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[ 9082.201866] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 9082.202358] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 9082.299419] usb 1-5: New USB device found, idVendor=17ef, idProduct=1005
[ 9082.299422] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 9082.301372] hub 1-5:1.0: USB hub found
[ 9082.301584] hub 1-5:1.0: 4 ports detected
[ 9082.339106] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xe frozen
[ 9082.339111] ata2: ACPI event
[ 9082.339117] ata2: hard resetting link
[ 9082.341112] thinkpad_acpi: unhandled HKEY event 0x2004
[ 9082.341114] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net
[ 9082.412894] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 9082.413167] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 9082.427664] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[ 9082.517047] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[ 9083.058827] ata2: SATA link down (SStatus 0 SControl 300)
[ 9083.068919] ata2: EH complete
[ 9087.598476] wls1: authenticate with 2c:30:33:9c:b9:65
[ 9087.602613] wls1: send auth to 2c:30:33:9c:b9:65 (try 1/3)
[ 9087.616898] wls1: authenticated
[ 9087.617880] wls1: associate with 2c:30:33:9c:b9:65 (try 1/3)
[ 9087.619200] wls1: RX AssocResp from 2c:30:33:9c:b9:65 (capab=0x11 status=0 aid=6)
[ 9087.621411] wls1: associated
[ 9087.621464] IPv6: ADDRCONF(NETDEV_CHANGE): wls1: link becomes ready
[thinkpad@ThinkpadX200 ~]$ nmcli general status
ÉTAT      CONNECTIVITÉ  WIFI-HW  WIFI    WWAN-HW  WWAN   
connecté  plein         activé   activé  activé   activé 
[thinkpad@ThinkpadX200 ~]$ nmcli device show
GENERAL.PÉRIPHÉRIQUE:                   wls1
GENERAL.TYPE:                           wifi
GENERAL.ADR.-MAT.:                      F8:16:54:DA:5D:B3
GENERAL.MTU:                            0
GENERAL.ÉTAT:                           100 (connecté)
GENERAL.CONNEXION:                      XXXXXXXX
GENERAL.CON-PATH:                       /org/freedesktop/NetworkManager/ActiveConnection/14
IP4.ADRESSE[1]:                         192.168.XX.XXX/24
IP4.PASSERELLE:                         192.168.XX.XXX
IP4.DNS[1]:                             192.168.XX.XXX
IP4.DOMAINE[1]:                         POUET
IP6.ADRESSE[1]:                         fe80::a844:734:XXXX:XXXX/64
IP6.PASSERELLE:                         

GENERAL.PÉRIPHÉRIQUE:                   lo
GENERAL.TYPE:                           loopback
GENERAL.ADR.-MAT.:                      00:00:00:00:00:00
GENERAL.MTU:                            65536
GENERAL.ÉTAT:                           10 (non-géré)
GENERAL.CONNEXION:                      --
GENERAL.CON-PATH:                       --
IP4.ADRESSE[1]:                         127.0.0.1/8
IP4.PASSERELLE:                         
IP6.ADRESSE[1]:                         ::1/128
IP6.PASSERELLE:                         
[thinkpad@ThinkpadX200 ~]$ 

Sinon pour Chepioq j'ai déjà tenté modprobe e1000e, sans résultat.

Merci de m'aider <3

Hors ligne

#9 10/01/2018 16:56:09

chepioq
FEDORA FOR EVER
Lieu : a l'est de marseille
Inscription : 07/06/2006
Messages : 7 071

Re : Carte ethernet détectée lspci, pilote installé, no network.

Peut-être que que le kernel de ta F24 a une version du driver trop ancienne.
J'ai trouvé ceci : https://downloadcenter.intel.com/download/15817

Cela vaut le coup d'essayer.


Tout est dans tout... et réciproquement...
C'est quoi un chalumeau??? C'est un dromaludaire à deux bosses...
Quand le sage montre la lune l'imbécile regarde le doigt...
1277887812.gif

Hors ligne

#10 10/01/2018 19:30:48

Torp1lle
Membre
Inscription : 06/01/2018
Messages : 7

Re : Carte ethernet détectée lspci, pilote installé, no network.

Bon j'ai re-mis le driver et du coup j'ai un truc qui apparaît quand je fais modification des connexions : je peux sélectionner enp0s25 et la ligne ethernet s'est créée d'elle même dans ce gestionnaire.

Par contre toujours rien sous ifconfig et la carte ne semble pas s'allumer.

hmm

Hors ligne

#11 10/01/2018 20:49:30

nouvo09
Accro à Fedo !
Lieu : Paris
Inscription : 21/09/2005
Messages : 20 743

Re : Carte ethernet détectée lspci, pilote installé, no network.

la ligne ethernet s'est créée d'elle même dans ce gestionnaire.

il faut peut-être effectuer quelques paramétrages ? Voire même cliquer sur "connecter"


C'est pas parce que c'est difficile qu'on n'ose pas,
c'est parce qu'on ose pas que c'est difficile !

Hors ligne

#12 11/01/2018 11:33:40

Torp1lle
Membre
Inscription : 06/01/2018
Messages : 7

Re : Carte ethernet détectée lspci, pilote installé, no network.

Bon je bloque encore, même si je pense que ça progresse.

Il faut que je fasse un rmmod pour que y'ai un kernel driver, voir ci dessous :

[thinkpad@ThinkpadX200 ~]$ lspci -nnk | grep -iA3 "Ethernet"
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network Connection [8086:10f5] (rev 03)
	Subsystem: Lenovo Device [17aa:20ee]
	Kernel modules: e1000e
[thinkpad@ThinkpadX200 ~]$ sudo rmmod e1000e
[thinkpad@ThinkpadX200 ~]$ sudo modprobe e1000e
[thinkpad@ThinkpadX200 ~]$ lspci -nnk | grep -iA3 "Ethernet"
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network Connection [8086:10f5] (rev 03)
	Subsystem: Lenovo Device [17aa:20ee]
	Kernel driver in use: e1000e
	Kernel modules: e1000e
[thinkpad@ThinkpadX200 ~]$ 

Après cette commande j'ai bien ma carte ethernet sous  ip link ou ifconfig, mais elle ne fonctionne pas.

Si le pc sleep ou reboot il faut que je refasse le rmmod et modprobe, mais bon ça je pense que c'est pas méchant à corriger...

J'vais boot un ubuntu ou mint live pour voir si ma carte ethernet marche, mais je pense que oui le boot pxe choppe une ip.

Merci encore pour votre aide.

Dernière modification par Torp1lle (11/01/2018 11:34:07)

Hors ligne

Pied de page des forums