bonjour,
creation de br0
modification ifcfg-enp7s0 et 8s0
ça marche à moitié
inet 172.17.0.1 netmask 255.255.0.0 broadcast 0.0.0.0
ether 02:42:76:e9:c7:ab txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
enp7s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.30 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 2a01:cb0c:835f:2400:a3c:7294:b354:218a prefixlen 64 scopeid 0x0<global>
inet6 fe80::301:460b:611f:264e prefixlen 64 scopeid 0x20<link>
ether 1c:6f:65:3d:35:16 txqueuelen 1000 (Ethernet)
RX packets 2020 bytes 270518 (264.1 KiB)
RX errors 0 dropped 68 overruns 0 frame 0
TX packets 1603 bytes 270649 (264.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
enp8s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.0.0.30 netmask 255.0.0.0 broadcast 10.255.255.255
inet6 fe80::20c:76ff:feae:b556 prefixlen 64 scopeid 0x20<link>
ether 00:0c:76:ae:b5:56 txqueuelen 1000 (Ethernet)
RX packets 1398 bytes 105811 (103.3 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 645 bytes 92654 (90.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Boucle locale)
RX packets 4 bytes 200 (200.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 4 bytes 200 (200.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[root@alpha30 ~]# date
mar. août 15 09:07:39 CEST 2017
[root@alpha30 ~]# arp -a
gateway (192.168.1.1) at 48:83:c7:0c:e4:ae [ether] on enp7s0
? (10.0.0.73) at 2c:60:0c:87:ff:1f [ether] on enp8s0
[root@alpha30 ~]# route -n
Table de routage IP du noyau
Destination Passerelle Genmask Indic Metric Ref Use Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 20100 0 0 enp7s0
10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 enp8s0
172.17.0.0 0.0.0.0 255.255.0.0 U 0 0 0 docker0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0
192.168.1.0 0.0.0.0 255.255.255.0 U 100 0 0 enp7s0
[root@alpha30 ~]#
sur enp8s0 ayant un client w10 j'ai le petit rectangle réseau avec un !
les paramètres w10 fontionne avec d'autres linux
le ping fonctionne
c'est le parefeu qui me joue des tours ?