J'ai aussi le problème suivant: plus possible de synchroniser mon Palm Treo 650 avec Jpilot alors que cela a fonctionné sous F8 et fonctionnait sans problème sous F7. A chaque tentative, j'ai le message suivant dans Jpilot:
****************************************
Synchronisation sur /dev/ttyUSB1
Appuyez sur le bouton HotSync maintenant
****************************************
J-Pilot: sync PID = 22117
J-Pilot : appuyez sur le bouton HotSync ou "kill 22117"
Si j'appuye sur le bouton HotSync, il ne se passe rien.
Pourtant, il me semble que tout est bien configuré. Voici une copie de mon fichier /etc/udev/rules.d/50-udev-default.rules:
...
# serial+dialup devices
KERNEL=="pty[pqrstuvwxyzabcdef][0123456789abcdef]", GROUP="tty", MODE="0660", OPTIONS="last_rule"
KERNEL=="tty[pqrstuvwxyzabcdef][0123456789abcdef]", GROUP="tty", MODE="0660", OPTIONS="last_rule"
KERNEL=="ptmx", GROUP="tty", MODE="0666", OPTIONS="last_rule"
KERNEL=="tty", GROUP="tty", MODE="0666", OPTIONS="last_rule"
KERNEL=="tty[0-9]*", GROUP="tty", MODE="0620", OPTIONS="last_rule"
KERNEL=="vcs|vcs[0-9]*|vcsa|vcsa[0-9]*", GROUP="tty", OPTIONS="last_rule"
KERNEL=="console", MODE="0600", OPTIONS="last_rule"
KERNEL=="tty0", SYMLINK+="systty"
KERNEL=="ttyS*", GROUP="uucp", MODE="0660"
KERNEL=="ttyACM*", GROUP="uucp", MODE="0660"
KERNEL=="ttyUSB*", GROUP="uucp", MODE="0666"
...
J'ai aussi créé un fichier /etc/udev/rules.d/10-udev.rules:
# Palm Treo 650
BUS=="usb", SYSFS{product}=="Palm Handheld", SYSFS{serial}=="PalmSN12345678", SYSFS{manufacturer}=="PalmOne, Inc.", KERNEL=="ttyUSB*", SYMLINK+="pilot", MODE="0666"
Les modules "visor" et "usbserial" sont bien démarrés:
[root@localhost ~]# lsmod | grep visor
visor 18253 0
usbserial 30505 1 visor
Et mon Palm semble bien se connecter au PC lorsque j'appuye sur le bouton de synchronisation:
[root@localhost ~]# ls -l /dev/ttyUSB*
crw-rw----+ 1 Cactus uucp 188, 0 aoû 27 13:10 /dev/ttyUSB0
crw-rw----+ 1 Cactus uucp 188, 1 aoû 27 13:10 /dev/ttyUSB1
[root@localhost ~]# tail -f /var/log/messages
Aug 27 13:10:45 localhost kernel: usb 3-2: new full speed USB device using uhci_hcd and address 3
Aug 27 13:10:45 localhost kernel: usb 3-2: configuration #1 chosen from 1 choice
Aug 27 13:10:45 localhost kernel: visor 3-2:1.0: Handspring Visor / Palm OS converter detected
Aug 27 13:10:45 localhost kernel: usb 3-2: Handspring Visor / Palm OS converter now attached to ttyUSB0
Aug 27 13:10:45 localhost kernel: usb 3-2: Handspring Visor / Palm OS converter now attached to ttyUSB1
Aug 27 13:10:45 localhost kernel: usb 3-2: New USB device found, idVendor=0830, idProduct=0061
Aug 27 13:10:45 localhost kernel: usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
Aug 27 13:10:45 localhost kernel: usb 3-2: Product: Palm Handheld
Aug 27 13:10:45 localhost kernel: usb 3-2: Manufacturer: PalmOne, Inc.
Aug 27 13:10:45 localhost kernel: usb 3-2: SerialNumber: PalmSN12345678
Toute suggestion pour débloquer la situation est la bienvenue...