JCLL Salut à tous ! Voilà mon problème : - je viend d'acquérir un écran LCD Samsumg SyncMaster 2232bw (22 pouces, 16/9, avec résolution optimale de 1650x1080). - carte ATI Radeon serie X300/X550 - driver ATI de Livna : kmod-fglrx.i686 8.443.1-1.7.122.6.23.1 installed J'ai réussi à configurer Fedora 7 il y a quelques jours pour cette résolution, MAIS suite à un yum update (hier), ca ne marche plus : ma résolution est toujours inférieure. Comment faire ? Comment configuer le xorg.conf ? Est-ce un problème connu ? Merci de votre aide ! JCLL Voilà mobn xorg.conf actuel : [jean@bureau ~]$ more /etc/X11/xorg.conf # Xorg configuration created by livna-config-display Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" EndSection Section "ServerFlags" Option "AIGLX" "on" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "fr" Option "XkbVariant" "latin9" EndSection Section "Monitor" Identifier "Monitor0" ModelName "LCD Panel 1680x1050" HorizSync 31.5 - 90.0 VertRefresh 59.9 - 60.1 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "fglrx" Option "OpenGLOverlay" "off" Option "VideoOverlay" "on" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1680x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480" "640x400" EndSubSection EndSection Section "Extensions" Option "Composite" "Enable" EndSection
snouffy Salut, tu peux essayer de ne laisser que la résolution qui t'interresse dans le xorg.conf : Modes "1680x1050"
VINDICATORs http://forums.fedora-fr.org/viewtopic.php?id=26116&p=9 Tout en haut de la page 9! j'aimerai avoir une solution plus simple, mais il y a un bogue avec la dernière version du pilote comme décrit dans la documentation : http://doc.fedora-fr.org/wiki/Carte_graphique_ATI_:_manuel_et_solution_du_pilote_propri%C3%A9taire
JCLL Salut Vindicator, En haut de la page 9, tu me conseilles la manip de droopy64 ? Est-ce qu'il faut que j'applique aussi ta formule avant (rappelée ci dessous) ? su - wget http://koji.fedoraproject.org/packages/xorg-x11-server/1.3.0.0/9.fc7/i386/xorg-x11-server-Xorg-1.3.0.0-9.fc7.i386.rpm rpm -U --oldpackage --nodeps xorg-x11-server-Xorg-1.3.0.0-9.fc7.i386.rpm gdm-restart (ou redémarrer votre serveur graphique) Merci pour ton "assistanat" 😉 (!) JC
JCLL Ok, Je suis en train d'appliquer la méthode : j'ai récupéré cette ligne dans le /var/log/Xorg.log, nettoyée : Modeline "1680x1050" 119.00 1680 1728 1760 1840 1050 1053 1059 1080 Je dois la "copier dans la section monitor du Xorg.conf", Section "Monitor" Identifier "Monitor0" ModelName "LCD Panel 1680x1050" Modeline "1680x1050" 119.00 1680 1728 1760 1840 1050 1053 1059 1080 HorizSync 31.5 - 90.0 Je laisse tel quel ??? VertRefresh 59.9 - 60.1 Je laisse tel quel ??? Option "dpms" EndSection Bizarre ! Help ! JC
JCLL J'ai essayé, mais ca n'a pas marché (écran noir après avoir relancé le serveur x, en fin de manip. Idem après un reboot). Voil à version du xorg.conf en ERREUR Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" EndSection Section "ServerFlags" Option "AIGLX" "on" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "fr" Option "XkbVariant" "latin9" EndSection Section "Monitor" Identifier "Monitor0" ModelName "LCD Panel 1680x1050" HorizSync 31.5 - 90.0 VertRefresh 59.9 - 60.1 ModeLine "1680x1050" 119.0 1680 1728 1760 1840 1050 1053 1059 1080 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "fglrx" Option "OpenGLOverlay" "off" Option "VideoOverlay" "on" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1680x1050" EndSubSection EndSection Section "Extensions" Option "Composite" "Enable" EndSection Après utilisation d'un rescue CD, et copie d'un ancien xorg.conf (insatisfaisant : pas de 1650x1080) Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" EndSection Section "ServerFlags" Option "AIGLX" "on" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "fr" Option "XkbVariant" "latin9" EndSection Section "Monitor" Identifier "Monitor0" ModelName "LCD Panel 1680x1050" HorizSync 31.5 - 90.0 VertRefresh 59.9 - 60.1 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "radeon" Option "OpenGLOverlay" "off" Option "VideoOverlay" "on" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 24 Modes "800x600" EndSubSection SubSection "Display" Viewport 0 0 Depth 16 Modes "1600x1200" "1280x1024" "1152x864" "1024x768" "800x600" "640x480" "640x400" EndSubSection EndSection Section "Extensions" Option "Composite" "Enable" EndSection
VINDICATORs Alors insatisfaisant c'est un bogue du pilote, après pour le résultat ça à l'air d'être aléatoire, mais je suis sur le coup!
JCLL Bon, je ne sais plus trop où j'en suis et ce que j'ai fait hier : désormais ca marche. Je laisse le xorg.conf actuel à toutes fins utiles. Avec ca : 1) Systeme>préférences>Matériel>Résolution d'écran fait apparaitre le 1680x1050 tant espéré ! 2) Système>administration>Affichage aussi 3) Ensuite, malgré ca j'ai dû appuyer sur la touche "auto" d'ajustement de l'écran. Il ne faudra pas l'oublier ! 4) Et ca continue de marcher au reboot. Sauvé ! Par contre, désormais, je me pose la question (d'Utilisateur que je suis, avec un grand U) : Comment, dans yum, éviter ces déconvenues ? Je souhaite continuer à updater mes logiciels, mais ne rien toucher à ces aspects de config matérielles (sauf problèmes de sécurité). Bref : quelle bonne attitude adopter ? Amicalement vôtre, JC # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" EndSection Section "ServerFlags" Option "AIGLX" "on" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "fr" Option "XkbVariant" "latin9" EndSection Section "Monitor" Identifier "Monitor0" ModelName "LCD Panel 1680x1050" HorizSync 31.5 - 90.0 VertRefresh 59.9 - 60.1 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "radeon" Option "OpenGLOverlay" "off" Option "VideoOverlay" "on" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 24 Modes "800x600" EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection EndSection Section "Extensions" Option "Composite" "Enable" EndSection