Fedora-Fr - Communauté francophone Fedora - Linux

Communauté francophone des utilisateurs de la distribution Linux Fedora.

  

Dernière news : Rétrospective de l'adoption du nouveau logo de Fedora

#1 22/08/2020 22:10:10

Vagmund
Membre
Inscription : 22/08/2020
Messages : 12

fedora n'accroche pas le SSID

Bonjour à tous,

Après plusieurs années sous windows, j’ai décidé de revenir sous linux, et mon choix s’est porté sur la fedora.

Ma migration s’est bien passé et serait totale, si ce n’est un petit problème de wifi avec mon ordinateur fixe. Sur ce dernier, j’utilise une clé usb wifi (TP-Link TL-WN822N) pour accéder à internet. Je vois bien les différents SSID, je choisis donc le miens, la sécurité (WPA2), et renseigne le mot de passe, mais il n’arrive pas à l’accrocher. J’ai le message suivant :

Echec de connexion
L'activation de la connexion réseau à échoué

J’ai procédé de la même manière sur les portables de la maison, et je n’ai pas eu de souci particulier. Chose "amusante", quand je repasse sous windows le wifi n’est plus reconnu, et je dois débrancher, rebrancher la clé, pour que ça l’accroche à nouveau. Je me suis donc dit que ça pouvait venir de la box, or je n’ai pas la possibilité d’accéder aux logs, en admettant qu’il y en ait.

Quelqu’un aurait-il rencontré la même difficulté, et/ou connaitrait-il la solution à mon problème ?

J’utilise :
-    La fedora 32
-    Une clé wifi TP-Link TL-WN822N
-    Une freebox revolution

La commande lsusb, me retourne les informations suivantes (on voit bien ma clé en Bus 003 Device 005) :

Bus 002 Device 002: ID 8087:8000 Intel Corp. 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 003 Device 006: ID 045e:00db Microsoft Corp. Natural Ergonomic Keyboard 4000 V1.0
Bus 003 Device 005: ID 2357:0108 TP-Link TL-WN822N Version 4 RTL8192EU
Bus 003 Device 007: ID 058f:9410 Alcor Micro Corp. Keyboard
Bus 003 Device 004: ID 058f:9462 Alcor Micro Corp. USB Multimedia Keyboard
Bus 003 Device 003: ID 0079:0006 DragonRise Inc. PC TWIN SHOCK Gamepad
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Si vous avez besoin de plus d’information faites le moi savoir.

Merci d’avance à tous ceux qui pourront m’aider à terminer ma migration.

Vagmund

Hors ligne

#2 23/08/2020 09:21:13

Refuznik
Membre
Inscription : 31/01/2007
Messages : 7 887

Re : fedora n'accroche pas le SSID

Que renvoie la commande iwconfig ?

#3 23/08/2020 10:11:09

Vagmund
Membre
Inscription : 22/08/2020
Messages : 12

Re : fedora n'accroche pas le SSID

Bonjour Refuznik,

La commande iwconfig renvoie:

lo        no wireless extensions.

eno1      no wireless extensions.

wlp0s20u13  IEEE 802.11  ESSID:off/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=30 dBm   
          Retry short limit:7   RTS thr=2347 B   Fragment thr:off
          Power Management:off

et ifconfig:

eno1: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 94:de:80:7b:a1:a0  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 20  memory 0xf3100000-f3120000  

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Boucle locale)
        RX packets 3283  bytes 298499 (291.5 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 3283  bytes 298499 (291.5 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlp0s20u13: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 42:17:96:e8:e4:0a  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

Hors ligne

#4 23/08/2020 10:24:29

Refuznik
Membre
Inscription : 31/01/2007
Messages : 7 887

Re : fedora n'accroche pas le SSID

Question bête tu es en ipv6 ou en ipv4 sur ta box ?

#5 23/08/2020 10:43:22

Vagmund
Membre
Inscription : 22/08/2020
Messages : 12

Re : fedora n'accroche pas le SSID

Je suis en ipv4.

Hors ligne

#6 23/08/2020 11:06:03

Refuznik
Membre
Inscription : 31/01/2007
Messages : 7 887

Re : fedora n'accroche pas le SSID

Tu vas dans l'onglet de ta connexion, désactiver ipv6 et mettre ipv4 en auto.

#7 23/08/2020 11:26:42

Nicosss
Rédacteur Wiki
Rédacteur Wiki
Lieu : Isère
Inscription : 05/03/2007
Messages : 6 459
Site Web

Re : fedora n'accroche pas le SSID

Que retourne aussi la commande

$ dmesg

F34_64 Gnome-Shell - GA-990FXA-UD3 - Phenom II X6 1100T - NH-D14 - Ati HD 5750 Fanless - 16Go RAM /&/ F33_64 Gnome-Shell - Toshiba Satellite C660D-19X - 8Go RAM
F33_64 - ASRock 960GC-GS FX - AMD FX(tm)-8300 - 16Go RAM

Hors ligne

#8 23/08/2020 12:38:31

Vagmund
Membre
Inscription : 22/08/2020
Messages : 12

Re : fedora n'accroche pas le SSID

Refuznik a écrit :

Tu vas dans l'onglet de ta connexion, désactiver ipv6 et mettre ipv4 en auto.

ipv4 était déjà en auto, mais j'ai désactivé ipv6. Toujours pareil...

Hors ligne

#9 23/08/2020 12:42:50

Vagmund
Membre
Inscription : 22/08/2020
Messages : 12

Re : fedora n'accroche pas le SSID

Nicosss a écrit :

Que retourne aussi la commande dmesg

Bonjour Nicosss,

C'est très long, mais la commande dmesg renvoie:

[    0.000000] microcode: microcode updated early to revision 0x27, date = 2019-02-26
[    0.000000] Linux version 5.6.6-300.fc32.x86_64 (mockbuild@bkernel03.phx2.fedoraproject.org) (gcc version 10.0.1 20200328 (Red Hat 10.0.1-0.11) (GCC)) #1 SMP Tue Apr 21 13:44:19 UTC 2020
[    0.000000] Command line: BOOT_IMAGE=(hd6,gpt2)/vmlinuz-5.6.6-300.fc32.x86_64 root=/dev/mapper/fedora_localhost--live-root ro resume=/dev/mapper/fedora_localhost--live-swap rd.lvm.lv=fedora_localhost-live/root rd.lvm.lv=fedora_localhost-live/swap rhgb quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdd55fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bdd56000-0x00000000bdd5cfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bdd5d000-0x00000000be58efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000be58f000-0x00000000be7f7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000be7f8000-0x00000000cedd3fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cedd4000-0x00000000cefe6fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cefe7000-0x00000000ceffafff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000ceffb000-0x00000000cf0d2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cf0d3000-0x00000000cf7fefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cf7ff000-0x00000000cf7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042dffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0xbd59f018-0xbd5bf457] usable ==> usable
[    0.000000] e820: update [mem 0xbd59f018-0xbd5bf457] usable ==> usable
[    0.000000] e820: update [mem 0xbd58e018-0xbd59e457] usable ==> usable
[    0.000000] e820: update [mem 0xbd58e018-0xbd59e457] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000bd58e017] usable
[    0.000000] reserve setup_data: [mem 0x00000000bd58e018-0x00000000bd59e457] usable
[    0.000000] reserve setup_data: [mem 0x00000000bd59e458-0x00000000bd59f017] usable
[    0.000000] reserve setup_data: [mem 0x00000000bd59f018-0x00000000bd5bf457] usable
[    0.000000] reserve setup_data: [mem 0x00000000bd5bf458-0x00000000bdd55fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000bdd56000-0x00000000bdd5cfff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000bdd5d000-0x00000000be58efff] usable
[    0.000000] reserve setup_data: [mem 0x00000000be58f000-0x00000000be7f7fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000be7f8000-0x00000000cedd3fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000cedd4000-0x00000000cefe6fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000cefe7000-0x00000000ceffafff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000ceffb000-0x00000000cf0d2fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000cf0d3000-0x00000000cf7fefff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000cf7ff000-0x00000000cf7fffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000042dffffff] usable
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0xcefeb000  ACPI 2.0=0xcefeb000  SMBIOS=0xf04c0  MPS=0xfd420 
[    0.000000] secureboot: Secure boot disabled
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. H87-D3H/H87-D3H-CF, BIOS F2 04/19/2013
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3491.965 MHz processor
[    0.001175] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001176] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001180] last_pfn = 0x42e000 max_arch_pfn = 0x400000000
[    0.001182] MTRR default type: uncachable
[    0.001183] MTRR fixed ranges enabled:
[    0.001184]   00000-9FFFF write-back
[    0.001184]   A0000-BFFFF uncachable
[    0.001184]   C0000-CFFFF write-protect
[    0.001185]   D0000-DFFFF uncachable
[    0.001185]   E0000-FFFFF write-protect
[    0.001186] MTRR variable ranges enabled:
[    0.001187]   0 base 0000000000 mask 7C00000000 write-back
[    0.001187]   1 base 0400000000 mask 7FE0000000 write-back
[    0.001188]   2 base 0420000000 mask 7FF8000000 write-back
[    0.001188]   3 base 0428000000 mask 7FFC000000 write-back
[    0.001188]   4 base 042C000000 mask 7FFE000000 write-back
[    0.001189]   5 base 00E0000000 mask 7FE0000000 uncachable
[    0.001189]   6 base 00D0000000 mask 7FF0000000 uncachable
[    0.001190]   7 disabled
[    0.001190]   8 disabled
[    0.001190]   9 disabled
[    0.001522] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001643] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[    0.001645] last_pfn = 0xcf800 max_arch_pfn = 0x400000000
[    0.007123] found SMP MP-table at [mem 0x000fd6d0-0x000fd6df]
[    0.007149] Using GB pages for direct mapping
[    0.007151] BRK [0x15b801000, 0x15b801fff] PGTABLE
[    0.007152] BRK [0x15b802000, 0x15b802fff] PGTABLE
[    0.007152] BRK [0x15b803000, 0x15b803fff] PGTABLE
[    0.007190] BRK [0x15b804000, 0x15b804fff] PGTABLE
[    0.007191] BRK [0x15b805000, 0x15b805fff] PGTABLE
[    0.007381] BRK [0x15b806000, 0x15b806fff] PGTABLE
[    0.007411] BRK [0x15b807000, 0x15b807fff] PGTABLE
[    0.007491] BRK [0x15b808000, 0x15b808fff] PGTABLE
[    0.007526] BRK [0x15b809000, 0x15b809fff] PGTABLE
[    0.007550] BRK [0x15b80a000, 0x15b80afff] PGTABLE
[    0.007596] BRK [0x15b80b000, 0x15b80bfff] PGTABLE
[    0.007648] BRK [0x15b80c000, 0x15b80cfff] PGTABLE
[    0.007720] secureboot: Secure boot disabled
[    0.007720] RAMDISK: [mem 0x5dee8000-0x6003efff]
[    0.007725] ACPI: Early table checksum verification disabled
[    0.007727] ACPI: RSDP 0x00000000CEFEB000 000024 (v02 ALASKA)
[    0.007729] ACPI: XSDT 0x00000000CEFEB078 00007C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.007732] ACPI: FACP 0x00000000CEFF5E88 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.007735] ACPI: DSDT 0x00000000CEFEB188 00ACFF (v02 ALASKA A M I    000000F2 INTL 20091112)
[    0.007737] ACPI: FACS 0x00000000CF0D1080 000040
[    0.007738] ACPI: APIC 0x00000000CEFF5F98 000092 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.007740] ACPI: SSDT 0x00000000CEFF6030 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.007741] ACPI: SSDT 0x00000000CEFF6570 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.007743] ACPI: MCFG 0x00000000CEFF7048 00003C (v01                 01072009 MSFT 00000097)
[    0.007744] ACPI: HPET 0x00000000CEFF7088 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.007746] ACPI: SSDT 0x00000000CEFF70C0 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.007747] ACPI: SSDT 0x00000000CEFF7430 003299 (v01 SaSsdt SaSsdt   00003000 INTL 20091112)
[    0.007749] ACPI: DMAR 0x00000000CEFFA6D0 000070 (v01 INTEL  HSW      00000001 INTL 00000001)
[    0.007750] ACPI: BGRT 0x00000000CEFFA740 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.007756] ACPI: Local APIC address 0xfee00000
[    0.007791] No NUMA configuration found
[    0.007792] Faking a node at [mem 0x0000000000000000-0x000000042dffffff]
[    0.007799] NODE_DATA(0) allocated [mem 0x42dfd5000-0x42dffffff]
[    0.037959] Zone ranges:
[    0.037960]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.037961]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.037961]   Normal   [mem 0x0000000100000000-0x000000042dffffff]
[    0.037962]   Device   empty
[    0.037962] Movable zone start for each node
[    0.037965] Early memory node ranges
[    0.037965]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.037966]   node   0: [mem 0x0000000000059000-0x000000000009ffff]
[    0.037966]   node   0: [mem 0x0000000000100000-0x00000000bdd55fff]
[    0.037967]   node   0: [mem 0x00000000bdd5d000-0x00000000be58efff]
[    0.037967]   node   0: [mem 0x00000000be7f8000-0x00000000cedd3fff]
[    0.037967]   node   0: [mem 0x00000000cf7ff000-0x00000000cf7fffff]
[    0.037968]   node   0: [mem 0x0000000100000000-0x000000042dffffff]
[    0.038054] Zeroed struct page in unavailable ranges: 13565 pages
[    0.038055] Initmem setup node 0 [mem 0x0000000000001000-0x000000042dffffff]
[    0.038056] On node 0 totalpages: 4180739
[    0.038057]   DMA zone: 64 pages used for memmap
[    0.038057]   DMA zone: 25 pages reserved
[    0.038058]   DMA zone: 3998 pages, LIFO batch:0
[    0.038094]   DMA32 zone: 13166 pages used for memmap
[    0.038095]   DMA32 zone: 842597 pages, LIFO batch:63
[    0.045238]   Normal zone: 52096 pages used for memmap
[    0.045239]   Normal zone: 3334144 pages, LIFO batch:63
[    0.073208] ACPI: PM-Timer IO Port: 0x1808
[    0.073210] ACPI: Local APIC address 0xfee00000
[    0.073215] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.073224] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.073225] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.073226] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.073227] ACPI: IRQ0 used by override.
[    0.073228] ACPI: IRQ9 used by override.
[    0.073229] Using ACPI (MADT) for SMP configuration information
[    0.073230] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.073237] e820: update [mem 0xc2fea000-0xc302efff] usable ==> reserved
[    0.073245] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.073261] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.073262] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.073263] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.073264] PM: hibernation: Registered nosave memory: [mem 0xbd58e000-0xbd58efff]
[    0.073265] PM: hibernation: Registered nosave memory: [mem 0xbd59e000-0xbd59efff]
[    0.073265] PM: hibernation: Registered nosave memory: [mem 0xbd59f000-0xbd59ffff]
[    0.073267] PM: hibernation: Registered nosave memory: [mem 0xbd5bf000-0xbd5bffff]
[    0.073268] PM: hibernation: Registered nosave memory: [mem 0xbdd56000-0xbdd5cfff]
[    0.073269] PM: hibernation: Registered nosave memory: [mem 0xbe58f000-0xbe7f7fff]
[    0.073270] PM: hibernation: Registered nosave memory: [mem 0xc2fea000-0xc302efff]
[    0.073271] PM: hibernation: Registered nosave memory: [mem 0xcedd4000-0xcefe6fff]
[    0.073271] PM: hibernation: Registered nosave memory: [mem 0xcefe7000-0xceffafff]
[    0.073271] PM: hibernation: Registered nosave memory: [mem 0xceffb000-0xcf0d2fff]
[    0.073272] PM: hibernation: Registered nosave memory: [mem 0xcf0d3000-0xcf7fefff]
[    0.073273] PM: hibernation: Registered nosave memory: [mem 0xcf800000-0xf7ffffff]
[    0.073273] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.073274] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.073274] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.073274] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.073274] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.073275] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.073275] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.073275] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.073276] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.073276] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.073276] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.073277] [mem 0xcf800000-0xf7ffffff] available for PCI devices
[    0.073278] Booting paravirtualized kernel on bare hardware
[    0.073280] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.076722] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.076903] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144
[    0.076908] pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152
[    0.076909] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.076930] Built 1 zonelists, mobility grouping on.  Total pages: 4115388
[    0.076930] Policy zone: Normal
[    0.076931] Kernel command line: BOOT_IMAGE=(hd6,gpt2)/vmlinuz-5.6.6-300.fc32.x86_64 root=/dev/mapper/fedora_localhost--live-root ro resume=/dev/mapper/fedora_localhost--live-swap rd.lvm.lv=fedora_localhost-live/root rd.lvm.lv=fedora_localhost-live/swap rhgb quiet
[    0.077733] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.078133] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.078187] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.081426] DMAR: [Firmware Bug]: Your BIOS is broken; DMAR reported at address 0!
               BIOS vendor: American Megatrends Inc.; Ver: F2; Product Version: To be filled by O.E.M.
[    0.119593] Memory: 16078856K/16722956K available (14339K kernel code, 2400K rwdata, 4868K rodata, 2452K init, 6136K bss, 644100K reserved, 0K cma-reserved)
[    0.119599] random: get_random_u64 called from __kmem_cache_create+0x3e/0x620 with crng_init=0
[    0.119673] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.119682] Kernel/User page tables isolation: enabled
[    0.119694] ftrace: allocating 40698 entries in 159 pages
[    0.129459] ftrace: allocated 159 pages with 6 groups
[    0.129521] rcu: Hierarchical RCU implementation.
[    0.129522] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.129522] 	Tasks RCU enabled.
[    0.129523] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.129523] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.131548] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[    0.131727] random: crng done (trusting CPU's manufacturer)
[    0.131743] Console: colour dummy device 80x25
[    0.131747] printk: console [tty0] enabled
[    0.131758] ACPI: Core revision 20200110
[    0.131823] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.131832] APIC: Switch to symmetric I/O mode setup
[    0.131833] DMAR: Host address width 39
[    0.131833] DMAR: DRHD base: 0x00000000000000 flags: 0x1
[    0.131834] DMAR: Parse DMAR table failure.
[    0.132186] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.136833] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3255aa8a0e7, max_idle_ns: 440795239274 ns
[    0.136835] Calibrating delay loop (skipped), value calculated using timer frequency.. 6983.93 BogoMIPS (lpj=3491965)
[    0.136836] pid_max: default: 32768 minimum: 301
[    0.141553] LSM: Security Framework initializing
[    0.141560] Yama: becoming mindful.
[    0.141565] SELinux:  Initializing.
[    0.141575] *** VALIDATE selinux ***
[    0.141609] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.141637] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.141645] *** VALIDATE tmpfs ***
[    0.141738] *** VALIDATE proc ***
[    0.141772] *** VALIDATE cgroup ***
[    0.141773] *** VALIDATE cgroup2 ***
[    0.141804] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.141814] process: using mwait in idle threads
[    0.141815] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.141816] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.141817] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.141818] Spectre V2 : Mitigation: Full generic retpoline
[    0.141819] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.141819] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.141820] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.141820] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.141821] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.141822] MDS: Mitigation: Clear CPU buffers
[    0.141979] Freeing SMP alternatives memory: 36K
[    0.143879] TSC deadline timer enabled
[    0.143881] smpboot: CPU0: Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.143944] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.143957] ... version:                3
[    0.143957] ... bit width:              48
[    0.143958] ... generic registers:      4
[    0.143958] ... value mask:             0000ffffffffffff
[    0.143958] ... max period:             00007fffffffffff
[    0.143959] ... fixed-purpose events:   3
[    0.143959] ... event mask:             000000070000000f
[    0.143981] rcu: Hierarchical SRCU implementation.
[    0.144555] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.144604] smp: Bringing up secondary CPUs ...
[    0.144653] x86: Booting SMP configuration:
[    0.144654] .... node  #0, CPUs:      #1 #2 #3 #4
[    0.149255] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.149255]  #5 #6 #7
[    0.150184] smp: Brought up 1 node, 8 CPUs
[    0.150184] smpboot: Max logical packages: 1
[    0.150184] smpboot: Total of 8 processors activated (55871.44 BogoMIPS)
[    0.151242] devtmpfs: initialized
[    0.151242] x86/mm: Memory block size: 128MB
[    0.152219] PM: Registering ACPI NVS region [mem 0xbdd56000-0xbdd5cfff] (28672 bytes)
[    0.152219] PM: Registering ACPI NVS region [mem 0xceffb000-0xcf0d2fff] (884736 bytes)
[    0.152219] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.152219] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.152219] pinctrl core: initialized pinctrl subsystem
[    0.152219] PM: RTC time: 10:27:20, date: 2020-08-23
[    0.152219] thermal_sys: Registered thermal governor 'fair_share'
[    0.152219] thermal_sys: Registered thermal governor 'bang_bang'
[    0.152219] thermal_sys: Registered thermal governor 'step_wise'
[    0.152219] thermal_sys: Registered thermal governor 'user_space'
[    0.152219] NET: Registered protocol family 16
[    0.152219] audit: initializing netlink subsys (disabled)
[    0.152219] audit: type=2000 audit(1598178440.020:1): state=initialized audit_enabled=0 res=1
[    0.152219] cpuidle: using governor menu
[    0.152219] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.152219] ACPI: bus type PCI registered
[    0.152219] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.152219] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.152219] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.152219] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[    0.152219] PCI: Using configuration type 1 for base access
[    0.152219] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.154140] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.154140] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.249973] cryptd: max_cpu_qlen set to 1000
[    0.250998] alg: No test for 842 (842-generic)
[    0.250998] alg: No test for 842 (842-scomp)
[    0.252947] ACPI: Added _OSI(Module Device)
[    0.252947] ACPI: Added _OSI(Processor Device)
[    0.252947] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.252947] ACPI: Added _OSI(Processor Aggregator Device)
[    0.252947] ACPI: Added _OSI(Linux-Dell-Video)
[    0.252947] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.252947] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.258210] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.258853] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.259158] ACPI: Dynamic OEM Table Load:
[    0.259160] ACPI: SSDT 0xFFFF99949B500800 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.259617] ACPI: Dynamic OEM Table Load:
[    0.259619] ACPI: SSDT 0xFFFF99949B4DD000 0005AA (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.260105] ACPI: Dynamic OEM Table Load:
[    0.260106] ACPI: SSDT 0xFFFF99949B098600 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.261430] ACPI: Interpreter enabled
[    0.261448] ACPI: (supports S0 S3 S4 S5)
[    0.261448] ACPI: Using IOAPIC for interrupt routing
[    0.261464] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.261678] ACPI: Enabled 7 GPEs in block 00 to 3F
[    0.266476] ACPI: Power Resource [FN00] (off)
[    0.266515] ACPI: Power Resource [FN01] (off)
[    0.266551] ACPI: Power Resource [FN02] (off)
[    0.266587] ACPI: Power Resource [FN03] (off)
[    0.266622] ACPI: Power Resource [FN04] (off)
[    0.267026] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.267029] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.267149] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[    0.267221] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[    0.267222] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.267457] PCI host bridge to bus 0000:00
[    0.267458] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.267459] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.267459] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.267460] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.267461] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.267461] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.267462] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.267462] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeafffff window]
[    0.267463] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.267469] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    0.267525] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    0.267553] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.267647] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.267664] pci 0000:00:14.0: reg 0x10: [mem 0xf3120000-0xf312ffff 64bit]
[    0.267711] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.267761] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.267778] pci 0000:00:16.0: reg 0x10: [mem 0xf313c000-0xf313c00f 64bit]
[    0.267828] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.267875] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
[    0.267887] pci 0000:00:16.3: reg 0x10: [io  0xf0a0-0xf0a7]
[    0.267892] pci 0000:00:16.3: reg 0x14: [mem 0xf313a000-0xf313afff]
[    0.267977] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
[    0.267991] pci 0000:00:19.0: reg 0x10: [mem 0xf3100000-0xf311ffff]
[    0.267996] pci 0000:00:19.0: reg 0x14: [mem 0xf3139000-0xf3139fff]
[    0.268002] pci 0000:00:19.0: reg 0x18: [io  0xf040-0xf05f]
[    0.268047] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.268099] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.268116] pci 0000:00:1a.0: reg 0x10: [mem 0xf3138000-0xf31383ff]
[    0.268184] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.268238] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.268252] pci 0000:00:1b.0: reg 0x10: [mem 0xf3130000-0xf3133fff 64bit]
[    0.268300] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.268351] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.268413] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.268493] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
[    0.268557] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.268636] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.268653] pci 0000:00:1d.0: reg 0x10: [mem 0xf3137000-0xf31373ff]
[    0.268721] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.268778] pci 0000:00:1f.0: [8086:8c4a] type 00 class 0x060100
[    0.268914] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[    0.268926] pci 0000:00:1f.2: reg 0x10: [io  0xf090-0xf097]
[    0.268931] pci 0000:00:1f.2: reg 0x14: [io  0xf080-0xf083]
[    0.268936] pci 0000:00:1f.2: reg 0x18: [io  0xf070-0xf077]
[    0.268941] pci 0000:00:1f.2: reg 0x1c: [io  0xf060-0xf063]
[    0.268946] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.268951] pci 0000:00:1f.2: reg 0x24: [mem 0xf3136000-0xf31367ff]
[    0.268978] pci 0000:00:1f.2: PME# supported from D3hot
[    0.269024] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.269037] pci 0000:00:1f.3: reg 0x10: [mem 0xf3135000-0xf31350ff 64bit]
[    0.269053] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.269132] pci 0000:01:00.0: [10de:1187] type 00 class 0x030000
[    0.269146] pci 0000:01:00.0: reg 0x10: [mem 0xf2000000-0xf2ffffff]
[    0.269154] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[    0.269162] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.269167] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.269173] pci 0000:01:00.0: reg 0x30: [mem 0xf3000000-0xf307ffff pref]
[    0.269183] pci 0000:01:00.0: BAR 3: assigned to efifb
[    0.269233] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[    0.269267] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
[    0.269277] pci 0000:01:00.1: reg 0x10: [mem 0xf3080000-0xf3083fff]
[    0.269371] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.269372] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.269373] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xf30fffff]
[    0.269402] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.269448] pci 0000:03:00.0: [8086:244e] type 01 class 0x060401
[    0.269582] pci 0000:03:00.0: supports D1 D2
[    0.269582] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.269628] pci 0000:00:1c.3: PCI bridge to [bus 03-04] (subtractive decode)
[    0.269634] pci 0000:00:1c.3:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.269635] pci 0000:00:1c.3:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.269635] pci 0000:00:1c.3:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.269636] pci 0000:00:1c.3:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.269636] pci 0000:00:1c.3:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.269637] pci 0000:00:1c.3:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.269637] pci 0000:00:1c.3:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.269638] pci 0000:00:1c.3:   bridge window [mem 0xd0000000-0xfeafffff window] (subtractive decode)
[    0.269675] pci_bus 0000:04: extended config space not accessible
[    0.269747] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
[    0.269767] pci 0000:03:00.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.269767] pci 0000:03:00.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.269768] pci 0000:03:00.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.269768] pci 0000:03:00.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.269769] pci 0000:03:00.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.269769] pci 0000:03:00.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.269770] pci 0000:03:00.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.269770] pci 0000:03:00.0:   bridge window [mem 0xd0000000-0xfeafffff window] (subtractive decode)
[    0.270206] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.270233] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.270259] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.270286] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.270311] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.270336] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.270361] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.270387] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.270589] iommu: Default domain type: Translated 
[    0.270589] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.270589] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.270589] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.270589] vgaarb: loaded
[    0.270589] SCSI subsystem initialized
[    0.270589] libata version 3.00 loaded.
[    0.270589] ACPI: bus type USB registered
[    0.270589] usbcore: registered new interface driver usbfs
[    0.270589] usbcore: registered new interface driver hub
[    0.270589] usbcore: registered new device driver usb
[    0.270589] pps_core: LinuxPPS API ver. 1 registered
[    0.270589] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.270589] PTP clock support registered
[    0.270836] EDAC MC: Ver: 3.0.0
[    0.270847] Registered efivars operations
[    0.270876] PCI: Using ACPI for IRQ routing
[    0.271695] PCI: pci_cache_line_size set to 64 bytes
[    0.271695] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.271695] e820: reserve RAM buffer [mem 0xbd58e018-0xbfffffff]
[    0.271695] e820: reserve RAM buffer [mem 0xbd59f018-0xbfffffff]
[    0.271695] e820: reserve RAM buffer [mem 0xbdd56000-0xbfffffff]
[    0.271695] e820: reserve RAM buffer [mem 0xbe58f000-0xbfffffff]
[    0.271695] e820: reserve RAM buffer [mem 0xc2fea000-0xc3ffffff]
[    0.271695] e820: reserve RAM buffer [mem 0xcedd4000-0xcfffffff]
[    0.271695] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
[    0.271695] e820: reserve RAM buffer [mem 0x42e000000-0x42fffffff]
[    0.271695] NetLabel: Initializing
[    0.271695] NetLabel:  domain hash size = 128
[    0.271695] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.271695] NetLabel:  unlabeled traffic allowed by default
[    0.271874] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.271876] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.273850] clocksource: Switched to clocksource tsc-early
[    0.283033] *** VALIDATE bpf ***
[    0.283098] VFS: Disk quotas dquot_6.6.0
[    0.283109] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.283127] *** VALIDATE ramfs ***
[    0.283129] *** VALIDATE hugetlbfs ***
[    0.283149] pnp: PnP ACPI init
[    0.283223] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.283226] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.283322] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.283323] system 00:01: [io  0xffff] has been reserved
[    0.283324] system 00:01: [io  0xffff] has been reserved
[    0.283325] system 00:01: [io  0xffff] has been reserved
[    0.283325] system 00:01: [io  0x1c00-0x1cfe] has been reserved
[    0.283326] system 00:01: [io  0x1d00-0x1dfe] has been reserved
[    0.283326] system 00:01: [io  0x1e00-0x1efe] has been reserved
[    0.283327] system 00:01: [io  0x1f00-0x1ffe] has been reserved
[    0.283328] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.283328] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.283330] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.283345] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.283370] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.283372] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.283445] system 00:04: [io  0x0a00-0x0a0f] has been reserved
[    0.283446] system 00:04: [io  0x0a30-0x0a3f] has been reserved
[    0.283447] system 00:04: [io  0x0a20-0x0a2f] has been reserved
[    0.283448] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.283598] pnp 00:05: [dma 0 disabled]
[    0.283620] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.283646] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.283648] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.283897] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.283898] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.283899] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.283899] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.283900] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.283901] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.283901] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.283902] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.283903] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.283904] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.283904] system 00:07: [mem 0xf7fef000-0xf7feffff] has been reserved
[    0.283905] system 00:07: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[    0.283907] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.284060] pnp: PnP ACPI: found 8 devices
[    0.289229] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.289265] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.289267] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.289269] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xf30fffff]
[    0.289272] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.289279] pci 0000:03:00.0: PCI bridge to [bus 04]
[    0.289297] pci 0000:00:1c.3: PCI bridge to [bus 03-04]
[    0.289304] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.289305] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.289306] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.289306] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.289307] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.289307] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.289308] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.289309] pci_bus 0000:00: resource 11 [mem 0xd0000000-0xfeafffff window]
[    0.289309] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.289310] pci_bus 0000:01: resource 1 [mem 0xe8000000-0xf30fffff]
[    0.289311] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.289311] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.289312] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.289312] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.289313] pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.289314] pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.289314] pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.289315] pci_bus 0000:03: resource 11 [mem 0xd0000000-0xfeafffff window]
[    0.289315] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.289316] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.289316] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.289317] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.289318] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.289318] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.289319] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.289319] pci_bus 0000:04: resource 11 [mem 0xd0000000-0xfeafffff window]
[    0.289382] NET: Registered protocol family 2
[    0.289483] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.289502] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.289615] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.289726] TCP: Hash tables configured (established 131072 bind 65536)
[    0.289749] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.289778] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.289830] NET: Registered protocol family 1
[    0.289832] NET: Registered protocol family 44
[    0.305897] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x669 took 15555 usecs
[    0.321893] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x669 took 15612 usecs
[    0.321907] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.321915] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.321920] PCI: CLS 64 bytes, default 64
[    0.321963] Trying to unpack rootfs image as initramfs...
[    0.628948] Freeing initrd memory: 34140K
[    0.628976] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.628978] software IO TLB: mapped [mem 0xb958e000-0xbd58e000] (64MB)
[    0.629566] Initialise system trusted keyrings
[    0.629573] Key type blacklist registered
[    0.629603] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    0.630416] zbud: loaded
[    0.630697] Platform Keyring initialized
[    0.634283] NET: Registered protocol family 38
[    0.634284] Key type asymmetric registered
[    0.634285] Asymmetric key parser 'x509' registered
[    0.634289] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.634317] io scheduler mq-deadline registered
[    0.634317] io scheduler kyber registered
[    0.634331] io scheduler bfq registered
[    0.634372] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.634705] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.634715] efifb: probing for efifb
[    0.634729] efifb: showing boot graphics
[    0.635807] efifb: framebuffer at 0xf1000000, using 3072k, total 3072k
[    0.635808] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.635808] efifb: scrolling: redraw
[    0.635809] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.635830] fbcon: Deferring console take-over
[    0.635830] fb0: EFI VGA frame buffer device
[    0.635837] intel_idle: MWAIT substates: 0x42120
[    0.635838] intel_idle: v0.4.1 model 0x3C
[    0.636039] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.636128] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.636149] ACPI: Power Button [PWRB]
[    0.636168] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.636180] ACPI: Power Button [PWRF]
[    0.636647] thermal LNXTHERM:00: registered as thermal_zone0
[    0.636647] ACPI: Thermal Zone [TZ00] (28 C)
[    0.636771] thermal LNXTHERM:01: registered as thermal_zone1
[    0.636771] ACPI: Thermal Zone [TZ01] (30 C)
[    0.636875] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.636923] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.637853] serial 0000:00:16.3: enabling device (0000 -> 0003)
[    0.637949] 0000:00:16.3: ttyS4 at I/O 0xf0a0 (irq = 19, base_baud = 115200) is a 16550A
[    0.638090] Non-volatile memory driver v1.3
[    0.638104] Linux agpgart interface v0.103
[    0.638482] ahci 0000:00:1f.2: version 3.0
[    0.638580] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    0.638581] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst 
[    0.654362] scsi host0: ahci
[    0.654536] scsi host1: ahci
[    0.654660] scsi host2: ahci
[    0.654703] scsi host3: ahci
[    0.654745] scsi host4: ahci
[    0.654786] scsi host5: ahci
[    0.654807] ata1: SATA max UDMA/133 abar m2048@0xf3136000 port 0xf3136100 irq 27
[    0.654808] ata2: SATA max UDMA/133 abar m2048@0xf3136000 port 0xf3136180 irq 27
[    0.654809] ata3: SATA max UDMA/133 abar m2048@0xf3136000 port 0xf3136200 irq 27
[    0.654810] ata4: SATA max UDMA/133 abar m2048@0xf3136000 port 0xf3136280 irq 27
[    0.654810] ata5: SATA max UDMA/133 abar m2048@0xf3136000 port 0xf3136300 irq 27
[    0.654811] ata6: SATA max UDMA/133 abar m2048@0xf3136000 port 0xf3136380 irq 27
[    0.654927] libphy: Fixed MDIO Bus: probed
[    0.654984] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.654985] ehci-pci: EHCI PCI platform driver
[    0.655072] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.655088] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.655096] ehci-pci 0000:00:1a.0: debug port 2
[    0.658994] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.659001] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf3138000
[    0.665907] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.665947] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[    0.665948] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.665948] usb usb1: Product: EHCI Host Controller
[    0.665949] usb usb1: Manufacturer: Linux 5.6.6-300.fc32.x86_64 ehci_hcd
[    0.665949] usb usb1: SerialNumber: 0000:00:1a.0
[    0.666110] hub 1-0:1.0: USB hub found
[    0.666114] hub 1-0:1.0: 2 ports detected
[    0.666293] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.666390] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.666398] ehci-pci 0000:00:1d.0: debug port 2
[    0.670287] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.670298] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3137000
[    0.676906] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.676948] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[    0.676948] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.676949] usb usb2: Product: EHCI Host Controller
[    0.676950] usb usb2: Manufacturer: Linux 5.6.6-300.fc32.x86_64 ehci_hcd
[    0.676950] usb usb2: SerialNumber: 0000:00:1d.0
[    0.677111] hub 2-0:1.0: USB hub found
[    0.677114] hub 2-0:1.0: 2 ports detected
[    0.677212] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.677214] ohci-pci: OHCI PCI platform driver
[    0.677221] uhci_hcd: USB Universal Host Controller Interface driver
[    0.677320] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.677417] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.678466] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    0.678469] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.678584] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[    0.678584] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.678585] usb usb3: Product: xHCI Host Controller
[    0.678586] usb usb3: Manufacturer: Linux 5.6.6-300.fc32.x86_64 xhci-hcd
[    0.678586] usb usb3: SerialNumber: 0000:00:14.0
[    0.678685] hub 3-0:1.0: USB hub found
[    0.678699] hub 3-0:1.0: 14 ports detected
[    0.679240] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.679322] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.679335] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    0.679361] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
[    0.679361] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.679362] usb usb4: Product: xHCI Host Controller
[    0.679362] usb usb4: Manufacturer: Linux 5.6.6-300.fc32.x86_64 xhci-hcd
[    0.679363] usb usb4: SerialNumber: 0000:00:14.0
[    0.679459] hub 4-0:1.0: USB hub found
[    0.679468] hub 4-0:1.0: 6 ports detected
[    0.679722] usbcore: registered new interface driver usbserial_generic
[    0.679724] usbserial: USB Serial support registered for generic
[    0.679737] i8042: PNP: No PS/2 controller found.
[    0.679766] mousedev: PS/2 mouse device common for all mice
[    0.679815] rtc_cmos 00:02: RTC can wake from S4
[    0.679966] rtc_cmos 00:02: registered as rtc0
[    0.679967] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.679993] device-mapper: uevent: version 1.0.3
[    0.680025] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[    0.680085] intel_pstate: Intel P-state driver initializing
[    0.680945] hid: raw HID events driver (C) Jiri Kosina
[    0.681025] usbcore: registered new interface driver usbhid
[    0.681026] usbhid: USB HID core driver
[    0.681252] drop_monitor: Initializing network drop monitor service
[    0.681420] Initializing XFRM netlink socket
[    0.681699] NET: Registered protocol family 10
[    0.692799] Segment Routing with IPv6
[    0.692817] mip6: Mobile IPv6
[    0.692818] NET: Registered protocol family 17
[    0.693445] RAS: Correctable Errors collector initialized.
[    0.693481] microcode: sig=0x306c3, pf=0x2, revision=0x27
[    0.693557] microcode: Microcode Update Driver: v2.2.
[    0.693560] IPI shorthand broadcast: enabled
[    0.693565] AVX2 version of gcm_enc/dec engaged.
[    0.693565] AES CTR mode by8 optimization enabled
[    0.731721] sched_clock: Marking stable (731586970, 128628)->(735310001, -3594403)
[    0.731815] registered taskstats version 1
[    0.731823] Loading compiled-in X.509 certificates
[    0.759803] Loaded X.509 cert 'Fedora kernel signing key: 0d97d514d1651893ca89cc557d3830fffcdfaba2'
[    0.759822] zswap: loaded using pool lzo/zbud
[    0.759956] Key type ._fscrypt registered
[    0.759956] Key type .fscrypt registered
[    0.759957] Key type fscrypt-provisioning registered
[    0.765684] Key type big_key registered
[    0.768225] Key type encrypted registered
[    0.768644] ima: No TPM chip found, activating TPM-bypass!
[    0.768649] ima: Allocated hash algorithm: sha256
[    0.768653] ima: No architecture policies found
[    0.768932] PM:   Magic number: 0:726:477
[    0.769052] rtc_cmos 00:02: setting system clock to 2020-08-23T10:27:21 UTC (1598178441)
[    0.959949] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.961032] ata1.00: NCQ Send/Recv Log not supported
[    0.961037] ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max UDMA/133
[    0.961041] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.961593] ata1.00: NCQ Send/Recv Log not supported
[    0.961602] ata1.00: configured for UDMA/133
[    0.961911] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  6B0Q PQ: 0 ANSI: 5
[    0.962287] ata1.00: Enabling discard_zeroes_data
[    0.962360] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.962380] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    0.962399] sd 0:0:0:0: [sda] Write Protect is off
[    0.962402] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.962429] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.962757] ata1.00: Enabling discard_zeroes_data
[    0.964539]  sda: sda1 sda2 sda3 sda4 sda5
[    0.965471] ata1.00: Enabling discard_zeroes_data
[    0.965632] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.966918] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.967645] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB00, max UDMA/100
[    0.967907] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.967932] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.967956] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.967982] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.969922] ata4.00: configured for UDMA/100
[    0.970716] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    0.970722] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    0.970726] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    0.970739] ata2.00: supports DRM functions and may not be fully accessible
[    0.970752] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    0.970757] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    0.970761] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    0.970805] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    0.970810] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    0.970813] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    0.971683] ata6.00: ATA-10: Micron 1100 SATA 256GB,  M0DL022, max UDMA/133
[    0.971687] ata6.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.971904] ata5.00: ATA-8: SanDisk SD6SB1M128G1001, X232201, max UDMA/133
[    0.971909] ata5.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    0.973353] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    0.973356] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    0.973358] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    0.973415] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    0.973417] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    0.973419] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    0.974551] ata5.00: configured for UDMA/133
[    0.974953] ata6.00: configured for UDMA/133
[    0.978531] ata2.00: disabling queued TRIM support
[    0.978533] ata2.00: ATA-9: Crucial_CT256MX100SSD1, MU01, max UDMA/133
[    0.978535] ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.987942] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.990174] ata3.00: ATA-8: WDC WD5000AACS-00ZUB0, 01.01B01, max UDMA/133
[    0.990177] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.991414] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    0.991417] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    0.991420] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    0.992183] ata3.00: configured for UDMA/133
[    0.995928] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.996317] ata2.00: supports DRM functions and may not be fully accessible
[    1.002458] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04
[    1.002461] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.002832] hub 1-1:1.0: USB hub found
[    1.002915] hub 1-1:1.0: 6 ports detected
[    1.004265] ata2.00: disabling queued TRIM support
[    1.004890] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[    1.010712] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
[    1.010716] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.011224] hub 2-1:1.0: USB hub found
[    1.011371] hub 2-1:1.0: 8 ports detected
[    1.021258] ata2.00: configured for UDMA/133
[    1.021540] scsi 1:0:0:0: Direct-Access     ATA      Crucial_CT256MX1 MU01 PQ: 0 ANSI: 5
[    1.021930] ata2.00: Enabling discard_zeroes_data
[    1.021965] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.022016] sd 1:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.022019] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    1.022051] sd 1:0:0:0: [sdb] Write Protect is off
[    1.022052] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.022061] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.022203] ata2.00: Enabling discard_zeroes_data
[    1.022212] scsi 2:0:0:0: Direct-Access     ATA      WDC WD5000AACS-0 1B01 PQ: 0 ANSI: 5
[    1.022335] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    1.022362]  sdb: sdb1
[    1.022365] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.022372] sd 2:0:0:0: [sdc] Write Protect is off
[    1.022373] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.022382] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.022585] ata2.00: Enabling discard_zeroes_data
[    1.022775] sd 1:0:0:0: [sdb] supports TCG Opal
[    1.022776] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.022926] scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S223F  SB00 PQ: 0 ANSI: 5
[    1.028586]  sdc: sdc1
[    1.028852] sd 2:0:0:0: [sdc] Attached SCSI disk
[    1.032209] usb 3-1: New USB device found, idVendor=13fe, idProduct=4200, bcdDevice= 1.00
[    1.032210] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.032224] usb 3-1: Product: USB Flash Drive
[    1.032224] usb 3-1: Manufacturer: Philips
[    1.032225] usb 3-1: SerialNumber: 07086C275F1B9F42
[    1.075951] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.075969] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.076600] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.076745] sr 3:0:0:0: Attached scsi generic sg3 type 5
[    1.076994] scsi 4:0:0:0: Direct-Access     ATA      SanDisk SD6SB1M1 201  PQ: 0 ANSI: 5
[    1.077261] sd 4:0:0:0: Attached scsi generic sg4 type 0
[    1.077394] sd 4:0:0:0: [sdd] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    1.077418] sd 4:0:0:0: [sdd] Write Protect is off
[    1.077423] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    1.077460] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.077550] scsi 5:0:0:0: Direct-Access     ATA      Micron 1100 SATA L022 PQ: 0 ANSI: 5
[    1.077926] ata6.00: Enabling discard_zeroes_data
[    1.077952] sd 5:0:0:0: Attached scsi generic sg5 type 0
[    1.078033] sd 5:0:0:0: [sde] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.078037] sd 5:0:0:0: [sde] 4096-byte physical blocks
[    1.078053] sd 5:0:0:0: [sde] Write Protect is off
[    1.078056] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[    1.078080] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.078325] ata6.00: Enabling discard_zeroes_data
[    1.078397]  sdd: sdd1
[    1.079025] sd 4:0:0:0: [sdd] Attached SCSI disk
[    1.080188]  sde: sde1 sde2 sde3
[    1.080774] ata6.00: Enabling discard_zeroes_data
[    1.080943] sd 5:0:0:0: [sde] Attached SCSI disk
[    1.082859] Freeing unused decrypted memory: 2040K
[    1.083642] Freeing unused kernel image (initmem) memory: 2452K
[    1.094012] Write protecting the kernel read-only data: 22528k
[    1.095293] Freeing unused kernel image (text/rodata gap) memory: 2044K
[    1.095919] Freeing unused kernel image (rodata/data gap) memory: 1276K
[    1.125170] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.125174] rodata_test: all tests were successful
[    1.125175] x86/mm: Checking user space page tables
[    1.147842] usb 3-9: new full-speed USB device number 3 using xhci_hcd
[    1.148232] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.148233] Run /init as init process
[    1.148233]   with arguments:
[    1.148234]     /init
[    1.148234]     rhgb
[    1.148234]   with environment:
[    1.148235]     HOME=/
[    1.148235]     TERM=linux
[    1.148235]     BOOT_IMAGE=(hd6,gpt2)/vmlinuz-5.6.6-300.fc32.x86_64
[    1.166706] systemd[1]: systemd v245.4-1.fc32 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[    1.177977] systemd[1]: Detected architecture x86-64.
[    1.177980] systemd[1]: Running in initial RAM disk.
[    1.178006] systemd[1]: Set hostname to <localhost.localdomain>.
[    1.236014] systemd[1]: Reached target Local File Systems.
[    1.236043] systemd[1]: Reached target Slices.
[    1.236050] systemd[1]: Reached target Swap.
[    1.236055] systemd[1]: Reached target Timers.
[    1.236144] systemd[1]: Listening on Journal Audit Socket.
[    1.236194] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.236249] systemd[1]: Listening on Journal Socket.
[    1.236297] systemd[1]: Listening on udev Control Socket.
[    1.236330] systemd[1]: Listening on udev Kernel Socket.
[    1.236336] systemd[1]: Reached target Sockets.
[    1.237166] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    1.237512] systemd[1]: Started Hardware RNG Entropy Gatherer Daemon.
[    1.238350] systemd[1]: Starting Journal Service...
[    1.238789] systemd[1]: Starting Load Kernel Modules...
[    1.239178] systemd[1]: Starting Setup Virtual Console...
[    1.239604] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    1.240065] systemd[1]: Starting Create Static Device Nodes in /dev...
[    1.244324] systemd[1]: Finished Create Static Device Nodes in /dev.
[    1.250179] fuse: init (API version 7.31)
[    1.250194] *** VALIDATE fuseblk ***
[    1.250196] *** VALIDATE fuse ***
[    1.250917] systemd[1]: Finished Load Kernel Modules.
[    1.255187] systemd[1]: Starting Apply Kernel Variables...
[    1.261304] systemd[1]: Finished Apply Kernel Variables.
[    1.276886] usb 3-9: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11
[    1.276887] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.276887] usb 3-9: Product: USB Receiver
[    1.276888] usb 3-9: Manufacturer: Logitech
[    1.280413] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/0003:046D:C52B.0001/input/input2
[    1.309421] systemd[1]: Finished Setup Virtual Console.
[    1.309547] systemd[1]: Condition check resulted in dracut ask for additional cmdline parameters being skipped.
[    1.310111] systemd[1]: Starting dracut cmdline hook...
[    1.331963] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-9/input0
[    1.335179] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.1/0003:046D:C52B.0002/input/input3
[    1.335244] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.1/0003:046D:C52B.0002/input/input4
[    1.374106] systemd[1]: Finished dracut cmdline hook.
[    1.374827] systemd[1]: Starting dracut pre-udev hook...
[    1.386898] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.1/0003:046D:C52B.0002/input/input5
[    1.386960] hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-9/input1
[    1.389538] hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-9/input2
[    1.395322] systemd[1]: Finished dracut pre-udev hook.
[    1.396026] systemd[1]: Starting udev Kernel Device Manager...
[    1.502840] usb 3-10: new low-speed USB device number 4 using xhci_hcd
[    1.578981] systemd[1]: Started Journal Service.
[    1.579068] audit: type=1130 audit(1598178442.308:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.587414] audit: type=1130 audit(1598178442.316:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.632771] usb 3-10: New USB device found, idVendor=0079, idProduct=0006, bcdDevice= 1.07
[    1.632772] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.632773] usb 3-10: Product: USB Joystick          
[    1.632774] usb 3-10: Manufacturer: Microntek             
[    1.634841] tsc: Refined TSC clocksource calibration: 3491.913 MHz
[    1.634845] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3255790e5ea, max_idle_ns: 440795224414 ns
[    1.634858] clocksource: Switched to clocksource tsc
[    1.715861] audit: type=1130 audit(1598178442.445:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.728157] input: Microntek              USB Joystick           as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:0079:0006.0004/input/input7
[    1.749845] usb 3-12: new full-speed USB device number 5 using xhci_hcd
[    1.779936] dragonrise 0003:0079:0006.0004: input,hidraw0: USB HID v1.10 Joystick [Microntek              USB Joystick          ] on usb-0000:00:14.0-10/input0
[    1.779945] dragonrise 0003:0079:0006.0004: Force Feedback for DragonRise Inc. game controllers by Richard Walmsley <richwalm@gmail.com>
[    1.780148] logitech-djreceiver 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-9/input2
[    1.792827] audit: type=1130 audit(1598178442.521:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.813250] audit: type=1130 audit(1598178442.542:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.863673] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.863674] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.867468] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.876493] usb 3-12: New USB device found, idVendor=058f, idProduct=9462, bcdDevice= 1.00
[    1.876494] usb 3-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.876495] usb 3-12: Product: USB Multimedia Keyboard
[    1.876496] usb 3-12: Manufacturer: ALCOR
[    1.876496] usb 3-12: SerialNumber: Au9410
[    1.877480] hub 3-12:1.0: USB hub found
[    1.877567] hub 3-12:1.0: 3 ports detected
[    1.886459] input: Logitech Unifying Device. Wireless PID:4069 Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.2/0003:046D:C52B.0003/0003:046D:4069.0005/input/input8
[    1.886551] input: Logitech Unifying Device. Wireless PID:4069 Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.2/0003:046D:C52B.0003/0003:046D:4069.0005/input/input9
[    1.886599] input: Logitech Unifying Device. Wireless PID:4069 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.2/0003:046D:C52B.0003/0003:046D:4069.0005/input/input10
[    1.886633] input: Logitech Unifying Device. Wireless PID:4069 System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.2/0003:046D:C52B.0003/0003:046D:4069.0005/input/input11
[    1.886678] hid-generic 0003:046D:4069.0005: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4069] on usb-0000:00:14.0-9/input2:1
[    1.950306] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    1.991842] usb 3-13: new high-speed USB device number 6 using xhci_hcd
[    2.004216] usb 3-13: New USB device found, idVendor=2357, idProduct=0108, bcdDevice= 2.00
[    2.004217] usb 3-13: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.004218] usb 3-13: Product: 802.11n NIC 
[    2.004219] usb 3-13: Manufacturer: Realtek 
[    2.004220] usb 3-13: SerialNumber: 00e04c000001
[    2.031259] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 94:de:80:7b:a1:a0
[    2.031260] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    2.031300] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[    2.033282] e1000e 0000:00:19.0 eno1: renamed from eth0
[    2.065135] checking generic (f1000000 300000) vs hw (e8000000 8000000)
[    2.065136] checking generic (f1000000 300000) vs hw (f0000000 2000000)
[    2.065137] fb0: switching to nouveaufb from EFI VGA
[    2.065223] nouveau 0000:01:00.0: NVIDIA GK104 (0e4070a2)
[    2.119840] usb 3-14: new low-speed USB device number 7 using xhci_hcd
[    2.167745] nouveau 0000:01:00.0: bios: version 80.04.c4.00.a2
[    2.168597] nouveau 0000:01:00.0: fb: 2048 MiB GDDR5
[    2.235317] [TTM] Zone  kernel: Available graphics memory: 8167288 KiB
[    2.235318] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[    2.235319] [TTM] Initializing pool allocator
[    2.235322] [TTM] Initializing DMA pool allocator
[    2.235334] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[    2.235334] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    2.235337] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    2.235338] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    2.235339] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000f02 00020030
[    2.235341] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000f00 00000000
[    2.235342] nouveau 0000:01:00.0: DRM: DCB outp 02: 08011f82 00020030
[    2.235343] nouveau 0000:01:00.0: DRM: DCB outp 03: 02022f62 00020010
[    2.235344] nouveau 0000:01:00.0: DRM: DCB outp 04: 04833fb6 0f420010
[    2.235345] nouveau 0000:01:00.0: DRM: DCB outp 05: 04033f72 00020010
[    2.235346] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[    2.235347] nouveau 0000:01:00.0: DRM: DCB conn 01: 00020131
[    2.235348] nouveau 0000:01:00.0: DRM: DCB conn 02: 00010261
[    2.235349] nouveau 0000:01:00.0: DRM: DCB conn 03: 00002346
[    2.236958] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[    2.256862] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.256863] [drm] Driver supports precise vblank timestamp query.
[    2.267788] usb 3-14: New USB device found, idVendor=045e, idProduct=00db, bcdDevice= 1.73
[    2.267789] usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.267790] usb 3-14: Product: Natural® Ergonomic Keyboard 4000
[    2.267790] usb 3-14: Manufacturer: Microsoft
[    2.292428] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/0003:045E:00DB.0006/input/input15
[    2.293823] usb-storage 3-1:1.0: USB Mass Storage device detected
[    2.299430] scsi host6: usb-storage 3-1:1.0
[    2.299502] usbcore: registered new interface driver usb-storage
[    2.302321] usbcore: registered new interface driver uas
[    2.313841] usb 3-12.1: new full-speed USB device number 8 using xhci_hcd
[    2.343953] microsoft 0003:045E:00DB.0006: input,hidraw3: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:14.0-14/input0
[    2.344151] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.1/0003:045E:00DB.0007/input/input16
[    2.390528] usb 3-12.1: New USB device found, idVendor=058f, idProduct=9410, bcdDevice= 1.22
[    2.390529] usb 3-12.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.390529] usb 3-12.1: Product: USB Multimedia Keyboard
[    2.390530] usb 3-12.1: Manufacturer: ALCOR
[    2.390531] usb 3-12.1: SerialNumber: Au9410
[    2.391931] input: ALCOR USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12.1/3-12.1:1.0/0003:058F:9410.0008/input/input17
[    2.408126] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0xa0000, bo 00000000e61e1df2
[    2.420392] fbcon: nouveaudrmfb (fb0) is primary device
[    2.420393] fbcon: Deferring console take-over
[    2.420395] nouveau 0000:01:00.0: fb0: nouveaudrmfb frame buffer device
[    2.505991] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[    2.572895] microsoft 0003:045E:00DB.0007: input,hidraw4: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:14.0-14/input1
[    2.624929] hid-generic 0003:058F:9410.0008: input,hidraw5: USB HID v1.10 Keyboard [ALCOR USB Multimedia Keyboard] on usb-0000:00:14.0-12.1/input0
[    2.625544] hid-generic 0003:058F:9410.0009: ignoring exceeding usage max
[    2.625627] hid-generic 0003:058F:9410.0009: ignoring exceeding usage max
[    2.626239] input: ALCOR USB Multimedia Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12.1/3-12.1:1.1/0003:058F:9410.0009/input/input18
[    2.748894] input: ALCOR USB Multimedia Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12.1/3-12.1:1.1/0003:058F:9410.0009/input/input19
[    2.784894] input: ALCOR USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12.1/3-12.1:1.1/0003:058F:9410.0009/input/input20
[    2.805964] hid-generic 0003:058F:9410.0009: input,hiddev96,hidraw1: USB HID v1.10 Device [ALCOR USB Multimedia Keyboard] on usb-0000:00:14.0-12.1/input1
[    2.812312] input: Logitech MX Master 2S as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.2/0003:046D:C52B.0003/0003:046D:4069.0005/input/input21
[    2.843999] logitech-hidpp-device 0003:046D:4069.0005: input,hidraw5: USB HID v1.11 Keyboard [Logitech MX Master 2S] on usb-0000:00:14.0-9/input2:1
[    2.844064] input: ALCOR USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12.1/3-12.1:1.0/0003:058F:9410.0008/input/input22
[    2.911019] maltron 0003:058F:9410.0008: input,hidraw6: USB HID v1.10 Keyboard [ALCOR USB Multimedia Keyboard] on usb-0000:00:14.0-12.1/input0
[    3.071969] maltron 0003:058F:9410.0009: ignoring exceeding usage max
[    3.072157] maltron 0003:058F:9410.0009: ignoring exceeding usage max
[    3.073015] input: ALCOR USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12.1/3-12.1:1.1/0003:058F:9410.0009/input/input23
[    3.124913] maltron 0003:058F:9410.0009: input,hiddev96,hidraw1: USB HID v1.10 Device [ALCOR USB Multimedia Keyboard] on usb-0000:00:14.0-12.1/input1
[    3.390445] scsi 6:0:0:0: Direct-Access     Philips  USB Flash Drive  PMAP PQ: 0 ANSI: 6
[    3.390594] sd 6:0:0:0: Attached scsi generic sg6 type 0
[    3.394004] sd 6:0:0:0: [sdf] 15654912 512-byte logical blocks: (8.02 GB/7.46 GiB)
[    3.396098] sd 6:0:0:0: [sdf] Write Protect is off
[    3.396100] sd 6:0:0:0: [sdf] Mode Sense: 23 00 00 00
[    3.397538] sd 6:0:0:0: [sdf] No Caching mode page found
[    3.397539] sd 6:0:0:0: [sdf] Assuming drive cache: write through
[    3.427012]  sdf:
[    3.436075] sd 6:0:0:0: [sdf] Attached SCSI removable disk
[    3.671152] audit: type=1130 audit(1598178444.400:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.688596] audit: type=1130 audit(1598178444.417:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.697708] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    3.711741] audit: type=1334 audit(1598178444.440:9): prog-id=5 op=UNLOAD
[    3.711743] audit: type=1334 audit(1598178444.440:10): prog-id=4 op=UNLOAD
[    3.903132] systemd-journald[327]: Received SIGTERM from PID 1 (systemd).
[    4.359118] SELinux:  Permission watch in class filesystem not defined in policy.
[    4.359121] SELinux:  Permission watch in class file not defined in policy.
[    4.359122] SELinux:  Permission watch_mount in class file not defined in policy.
[    4.359122] SELinux:  Permission watch_sb in class file not defined in policy.
[    4.359123] SELinux:  Permission watch_with_perm in class file not defined in policy.
[    4.359123] SELinux:  Permission watch_reads in class file not defined in policy.
[    4.359125] SELinux:  Permission watch in class dir not defined in policy.
[    4.359126] SELinux:  Permission watch_mount in class dir not defined in policy.
[    4.359126] SELinux:  Permission watch_sb in class dir not defined in policy.
[    4.359127] SELinux:  Permission watch_with_perm in class dir not defined in policy.
[    4.359127] SELinux:  Permission watch_reads in class dir not defined in policy.
[    4.359130] SELinux:  Permission watch in class lnk_file not defined in policy.
[    4.359130] SELinux:  Permission watch_mount in class lnk_file not defined in policy.
[    4.359131] SELinux:  Permission watch_sb in class lnk_file not defined in policy.
[    4.359131] SELinux:  Permission watch_with_perm in class lnk_file not defined in policy.
[    4.359131] SELinux:  Permission watch_reads in class lnk_file not defined in policy.
[    4.359133] SELinux:  Permission watch in class chr_file not defined in policy.
[    4.359133] SELinux:  Permission watch_mount in class chr_file not defined in policy.
[    4.359134] SELinux:  Permission watch_sb in class chr_file not defined in policy.
[    4.359134] SELinux:  Permission watch_with_perm in class chr_file not defined in policy.
[    4.359134] SELinux:  Permission watch_reads in class chr_file not defined in policy.
[    4.359136] SELinux:  Permission watch in class blk_file not defined in policy.
[    4.359136] SELinux:  Permission watch_mount in class blk_file not defined in policy.
[    4.359137] SELinux:  Permission watch_sb in class blk_file not defined in policy.
[    4.359137] SELinux:  Permission watch_with_perm in class blk_file not defined in policy.
[    4.359137] SELinux:  Permission watch_reads in class blk_file not defined in policy.
[    4.359139] SELinux:  Permission watch in class sock_file not defined in policy.
[    4.359140] SELinux:  Permission watch_mount in class sock_file not defined in policy.
[    4.359140] SELinux:  Permission watch_sb in class sock_file not defined in policy.
[    4.359140] SELinux:  Permission watch_with_perm in class sock_file not defined in policy.
[    4.359141] SELinux:  Permission watch_reads in class sock_file not defined in policy.
[    4.359142] SELinux:  Permission watch in class fifo_file not defined in policy.
[    4.359143] SELinux:  Permission watch_mount in class fifo_file not defined in policy.
[    4.359143] SELinux:  Permission watch_sb in class fifo_file not defined in policy.
[    4.359144] SELinux:  Permission watch_with_perm in class fifo_file not defined in policy.
[    4.359144] SELinux:  Permission watch_reads in class fifo_file not defined in policy.
[    4.359242] SELinux:  Class perf_event not defined in policy.
[    4.359242] SELinux:  Class lockdown not defined in policy.
[    4.359242] SELinux: the above unknown classes and permissions will be allowed
[    4.359252] SELinux:  policy capability network_peer_controls=1
[    4.359252] SELinux:  policy capability open_perms=1
[    4.359252] SELinux:  policy capability extended_socket_class=1
[    4.359252] SELinux:  policy capability always_check_network=0
[    4.359253] SELinux:  policy capability cgroup_seclabel=1
[    4.359253] SELinux:  policy capability nnp_nosuid_transition=1
[    4.376409] systemd[1]: Successfully loaded SELinux policy in 375.749ms.
[    4.382128] systemd[1]: RTC configured in localtime, applying delta of -240 minutes to system time.
[    4.430776] systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 27.821ms.
[    4.433978] systemd[1]: systemd v245.4-1.fc32 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[    4.446045] systemd[1]: Detected architecture x86-64.
[    4.446325] systemd[1]: Set hostname to <localhost.localdomain>.
[    4.582403] systemd[1]: /usr/lib/systemd/system/sssd.service:13: PIDFile= references a path below legacy directory /var/run/, updating /var/run/sssd.pid → /run/sssd.pid; please update the unit file accordingly.
[    4.596861] systemd[1]: /usr/lib/systemd/system/sssd-kcm.socket:7: ListenStream= references a path below legacy directory /var/run/, updating /var/run/.heim_org.h5l.kcm-socket → /run/.heim_org.h5l.kcm-socket; please update the unit file accordingly.
[    4.656321] systemd[1]: initrd-switch-root.service: Succeeded.
[    4.656421] systemd[1]: Stopped Switch Root.
[    4.656734] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[    4.657038] systemd[1]: Created slice Virtual Machine and Container Slice.
[    4.657188] systemd[1]: Created slice system-getty.slice.
[    4.657329] systemd[1]: Created slice system-modprobe.slice.
[    4.657469] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    4.657720] systemd[1]: Created slice User and Session Slice.
[    4.657740] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[    4.657811] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.658118] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.658146] systemd[1]: Reached target Login Prompts.
[    4.658164] systemd[1]: Stopped target Switch Root.
[    4.658180] systemd[1]: Stopped target Initrd File Systems.
[    4.658192] systemd[1]: Stopped target Initrd Root File System.
[    4.658219] systemd[1]: Reached target Slices.
[    4.658542] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.659129] systemd[1]: Listening on LVM2 poll daemon socket.
[    4.659213] systemd[1]: Listening on multipathd control socket.
[    4.660475] systemd[1]: Listening on Process Core Dump Socket.
[    4.660568] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    4.660921] systemd[1]: Listening on udev Control Socket.
[    4.661140] systemd[1]: Listening on udev Kernel Socket.
[    4.661344] systemd[1]: Listening on User Database Manager Socket.
[    4.661804] systemd[1]: Activating swap /dev/mapper/fedora_localhost--live-swap...
[    4.662407] systemd[1]: Mounting Huge Pages File System...
[    4.663004] systemd[1]: Mounting POSIX Message Queue File System...
[    4.663595] systemd[1]: Mounting Kernel Debug File System...
[    4.664590] systemd[1]: Mounting Kernel Trace File System...
[    4.664752] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[    4.665414] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    4.665880] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    4.665930] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[    4.666433] systemd[1]: Starting Preprocess NFS configuration convertion...
[    4.666663] systemd[1]: plymouth-switch-root.service: Succeeded.
[    4.666878] systemd[1]: Stopped Plymouth switch root service.
[    4.667579] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    4.667630] systemd[1]: Stopped Journal Service.
[    4.668615] systemd[1]: Starting Journal Service...
[    4.669618] systemd[1]: Starting Load Kernel Modules...
[    4.670248] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.670832] systemd[1]: Starting Repartition Root Disk...
[    4.671584] systemd[1]: Starting udev Coldplug all Devices...
[    4.672628] systemd[1]: sysroot.mount: Succeeded.
[    4.673446] systemd[1]: Mounted Huge Pages File System.
[    4.673667] systemd[1]: Mounted POSIX Message Queue File System.
[    4.673831] systemd[1]: Mounted Kernel Debug File System.
[    4.674048] systemd[1]: Mounted Kernel Trace File System.
[    4.674568] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    4.675008] systemd[1]: nfs-convert.service: Succeeded.
[    4.675153] systemd[1]: Finished Preprocess NFS configuration convertion.
[    4.677411] systemd[1]: Finished Load Kernel Modules.
[    4.677869] Adding 8232956k swap on /dev/mapper/fedora_localhost--live-swap.  Priority:-2 extents:1 across:8232956k SSFS
[    4.678825] systemd[1]: Mounting FUSE Control File System...
[    4.679501] systemd[1]: Starting Apply Kernel Variables...
[    4.679539] EXT4-fs (dm-0): re-mounted. Opts: (null)
[    4.681906] systemd[1]: Activated swap /dev/mapper/fedora_localhost--live-swap.
[    4.683190] systemd[1]: Finished Remount Root and Kernel File Systems.
[    4.683449] systemd[1]: Finished Repartition Root Disk.
[    4.683724] systemd[1]: Mounted FUSE Control File System.
[    4.683823] systemd[1]: Reached target Swap.
[    4.685229] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[    4.685790] systemd[1]: Mounting Temporary Directory (/tmp)...
[    4.685874] systemd[1]: Condition check resulted in OSTree Remount OS/ Bind Mounts being skipped.
[    4.685901] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[    4.686264] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    4.686751] systemd[1]: Starting Load/Save Random Seed...
[    4.686815] systemd[1]: Condition check resulted in Create System Users being skipped.
[    4.687460] systemd[1]: Starting Create Static Device Nodes in /dev...
[    4.688498] systemd[1]: Finished Apply Kernel Variables.
[    4.688669] systemd[1]: Mounted Temporary Directory (/tmp).
[    4.697213] systemd[1]: Finished Load/Save Random Seed.
[    4.708658] systemd[1]: Finished Create Static Device Nodes in /dev.
[    4.709960] systemd[1]: Starting udev Kernel Device Manager...
[    4.743897] systemd[1]: Finished udev Coldplug all Devices.
[    4.744624] systemd[1]: Starting udev Wait for Complete Device Initialization...
[    4.878147] systemd[1]: Started Journal Service.
[    4.884172] systemd-journald[675]: Received client request to flush runtime journal.
[    5.249219] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20200110/utaddress-204)
[    5.249222] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.249224] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200110/utaddress-204)
[    5.249226] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.249226] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20200110/utaddress-204)
[    5.249228] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200110/utaddress-204)
[    5.249229] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.249229] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20200110/utaddress-204)
[    5.249230] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200110/utaddress-204)
[    5.249231] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.249232] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    5.351743] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    5.352067] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[    5.352107] snd_hda_intel 0000:01:00.1: Disabling MSI
[    5.352112] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    5.403636] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops nv50_audio_component_bind_ops [nouveau])
[    5.412535] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input24
[    5.412633] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input25
[    5.412710] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input26
[    5.412760] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input27
[    5.412806] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input28
[    5.412863] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input29
[    5.412911] input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input30
[    5.457461] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[    5.457463] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.457464] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    5.457465] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[    5.457466] snd_hda_codec_realtek hdaudioC0D2:    dig-out=0x11/0x1e
[    5.457467] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[    5.457468] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
[    5.457469] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
[    5.457470] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[    5.457471] snd_hda_codec_realtek hdaudioC0D2:    dig-in=0x1f
[    5.473408] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input31
[    5.473465] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input32
[    5.473513] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input33
[    5.473557] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input34
[    5.473606] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input35
[    5.473646] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input36
[    5.473685] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input37
[    5.473753] snd_hda_intel 0000:00:1b.0: device 1458:a002 is on the power_save blacklist, forcing power_save to 0
[    5.528795] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.529175] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.551304] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[    5.551464] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    5.588790] usb 3-13: This Realtek USB WiFi dongle (0x2357:0x0108) is untested!
[    5.588792] usb 3-13: Please report results to Jes.Sorensen@gmail.com
[    5.641904] input: PC Speaker as /devices/platform/pcspkr/input/input38
[    5.652861] usb 3-13: Vendor: Realtek
[    5.652863] usb 3-13: Product: \x03802.11n NI
[    5.652864] usb 3-13: Serial: 
[    5.652865] usb 3-13: rtl8192eu_parse_efuse: dumping efuse (0x200 bytes):
[    5.652866] usb 3-13: 00: 29 81 00 7c 01 40 03 00
[    5.652867] usb 3-13: 08: 40 74 04 50 14 00 00 00
[    5.652868] usb 3-13: 10: 28 28 29 2a 2a 2a 29 29
[    5.652869] usb 3-13: 18: 29 2a 2a f2 ef ef ff ff
[    5.652870] usb 3-13: 20: ff ff ff ff ff ff ff ff
[    5.652871] usb 3-13: 28: ff ff ff ff ff ff ff ff
[    5.652872] usb 3-13: 30: ff ff ff ff ff ff ff ff
[    5.652873] usb 3-13: 38: ff ff 29 29 29 29 29 29
[    5.652874] usb 3-13: 40: 29 29 29 29 29 f2 ef ef
[    5.652875] usb 3-13: 48: ff ff ff ff ff ff ff ff
[    5.652875] usb 3-13: 50: ff ff ff ff ff ff ff ff
[    5.652876] usb 3-13: 58: ff ff ff ff ff ff ff ff
[    5.652877] usb 3-13: 60: ff ff ff ff ff ff ff ff
[    5.652878] usb 3-13: 68: ff ff ff ff ff ff ff ff
[    5.652879] usb 3-13: 70: ff ff ff ff ff ff ff ff
[    5.652880] usb 3-13: 78: ff ff ff ff ff ff ff ff
[    5.652881] usb 3-13: 80: ff ff ff ff ff ff ff ff
[    5.652882] usb 3-13: 88: ff ff ff ff ff ff ff ff
[    5.652883] usb 3-13: 90: ff ff ff ff ff ff ff ff
[    5.652884] usb 3-13: 98: ff ff ff ff ff ff ff ff
[    5.652885] usb 3-13: a0: ff ff ff ff ff ff ff ff
[    5.652886] usb 3-13: a8: ff ff ff ff ff ff ff ff
[    5.652887] usb 3-13: b0: ff ff ff ff ff ff ff ff
[    5.652888] usb 3-13: b8: a1 2f 1d 00 00 00 ff ff
[    5.652889] usb 3-13: c0: ff 01 00 10 00 00 00 ff
[    5.652890] usb 3-13: c8: 00 00 ff ff ff ff ff ff
[    5.652891] usb 3-13: d0: 57 23 08 01 e7 47 02 d0
[    5.652892] usb 3-13: d8: 37 45 0b 32 50 0a 03 52
[    5.652893] usb 3-13: e0: 65 61 6c 74 65 6b 20 0e
[    5.652893] usb 3-13: e8: 03 38 30 32 2e 31 31 6e
[    5.652894] usb 3-13: f0: 20 4e 49 43 20 00 00 ff
[    5.652895] usb 3-13: f8: ff ff ff ff ff ff ff ff
[    5.652896] usb 3-13: 100: ff ff ff ff ff ff ff ff
[    5.652897] usb 3-13: 108: ff ff ff ff ff ff ff ff
[    5.652898] usb 3-13: 110: ff ff ff ff ff ff ff 0d
[    5.652898] usb 3-13: 118: 03 00 05 00 30 00 00 00
[    5.652899] usb 3-13: 120: 00 93 ff ff ff ff ff ff
[    5.652900] usb 3-13: 128: ff ff ff ff ff ff ff ff
[    5.652901] usb 3-13: 130: f6 a8 98 2d 03 92 98 00
[    5.652902] usb 3-13: 138: fc 8c 00 11 9b 44 02 0a
[    5.652903] usb 3-13: 140: ff ff ff ff ff ff ff ff
[    5.652904] usb 3-13: 148: ff ff ff ff ff ff ff ff
[    5.652905] usb 3-13: 150: ff ff ff ff ff ff ff ff
[    5.652906] usb 3-13: 158: ff ff ff ff ff ff ff ff
[    5.652907] usb 3-13: 160: ff ff ff ff ff ff ff ff
[    5.652908] usb 3-13: 168: ff ff ff ff ff ff ff ff
[    5.652909] usb 3-13: 170: ff ff ff ff ff ff ff ff
[    5.652910] usb 3-13: 178: ff ff ff ff ff ff ff ff
[    5.652911] usb 3-13: 180: ff ff ff ff ff ff ff ff
[    5.652911] usb 3-13: 188: ff ff ff ff ff ff ff ff
[    5.652912] usb 3-13: 190: ff ff ff ff ff ff ff ff
[    5.652913] usb 3-13: 198: ff ff ff ff ff ff ff ff
[    5.652914] usb 3-13: 1a0: ff ff ff ff ff ff ff ff
[    5.652915] usb 3-13: 1a8: ff ff ff ff ff ff ff ff
[    5.652916] usb 3-13: 1b0: ff ff ff ff ff ff ff ff
[    5.652917] usb 3-13: 1b8: ff ff ff ff ff ff ff ff
[    5.652918] usb 3-13: 1c0: ff ff ff ff ff ff ff ff
[    5.652919] usb 3-13: 1c8: ff ff ff ff ff ff ff ff
[    5.652920] usb 3-13: 1d0: ff ff ff ff ff ff ff ff
[    5.652921] usb 3-13: 1d8: ff ff ff ff ff ff ff ff
[    5.652922] usb 3-13: 1e0: ff ff ff ff ff ff ff ff
[    5.652923] usb 3-13: 1e8: ff ff ff ff ff ff ff ff
[    5.652924] usb 3-13: 1f0: ff ff ff ff ff ff ff ff
[    5.652925] usb 3-13: 1f8: ff ff ff ff ff ff ff ff
[    5.652927] usb 3-13: RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0
[    5.652928] usb 3-13: RTL8192EU MAC: d0:37:45:0b:32:50
[    5.652930] usb 3-13: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin
[    5.654067] usb 3-13: Firmware revision 19.0 (signature 0x92e1)
[    5.655688] do the RAM reset
[    5.706099] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 655360 ms ovfl timer
[    5.706100] RAPL PMU: hw unit of domain package 2^-14 Joules
[    5.706102] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    5.859609] kauditd_printk_skb: 72 callbacks suppressed
[    5.859611] audit: type=1130 audit(1598192846.589:83): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.039986] iTCO_vendor_support: vendor-support=0
[    6.041426] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    6.041456] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[    6.189544] intel_rapl_common: Found RAPL domain package
[    6.189546] intel_rapl_common: Found RAPL domain dram
[    6.223318] audit: type=1130 audit(1598192846.953:84): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-pvscan@8:67 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.478236] usbcore: registered new interface driver rtl8xxxu
[    6.484051] rtl8xxxu 3-13:1.0 wlp0s20u13: renamed from wlan0
[    6.500833] audit: type=1130 audit(1598192847.230:85): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.519251] audit: type=1130 audit(1598192847.249:86): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.598645] audit: type=1130 audit(1598192847.328:87): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.598659] audit: type=1131 audit(1598192847.328:88): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.628886] audit: type=1130 audit(1598192847.359:89): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-c8df0180\x2ddbc6\x2d4d80\x2da185\x2deb60ce6a67a0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.631066] audit: type=1130 audit(1598192847.361:90): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-mapper-fedora_localhost\x2d\x2dlive\x2dhome comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.637365] EXT4-fs (sde2): mounted filesystem with ordered data mode. Opts: (null)
[    6.639705] audit: type=1130 audit(1598192847.369:91): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-7A13\x2dAE2E comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.641352] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[    6.659033] audit: type=1130 audit(1598192847.389:92): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.754523] RPC: Registered named UNIX socket transport module.
[    6.754524] RPC: Registered udp transport module.
[    6.754524] RPC: Registered tcp transport module.
[    6.754524] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   16.872680] FAT-fs (sdf): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   16.912139] rfkill: input handler disabled
[   18.698242] logitech-hidpp-device 0003:046D:4069.0005: HID++ 4.5 device connected.
[   18.924238] logitech-hidpp-device 0003:046D:4069.0005: multiplier = 8

Je remarque qu'en 5.588790, vers la fin, il est indiqué que cet adaptateur n'est pas testé. Celà peut-il venir de là?

Hors ligne

#10 23/08/2020 13:35:52

Refuznik
Membre
Inscription : 31/01/2007
Messages : 7 887

Re : fedora n'accroche pas le SSID

J'ai trouvé un driver mais il est pour les kernels 5.8 ou plus https://github.com/clnhub/rtl8192eu-linux
Quel version de clef as tu ? Car sur le site tu as des instruction pour le driver sous linux https://www.tp-link.com/fr/support/down … 822n/v5.2/

Dernière modification par Refuznik (23/08/2020 13:53:52)

#11 23/08/2020 15:56:51

Vagmund
Membre
Inscription : 22/08/2020
Messages : 12

Re : fedora n'accroche pas le SSID

Refuznik a écrit :

J'ai trouvé un driver mais il est pour les kernels 5.8 ou plus https://github.com/clnhub/rtl8192eu-linux
Quel version de clef as tu ? Car sur le site tu as des instruction pour le driver sous linux https://www.tp-link.com/fr/support/down … 822n/v5.2/

La version de ma clé est la 5.2, je vais aller voir les différents sites que tu m'indiques.
Mais le fait que je vois les différents SSID disponibles, ne signifie-t-il pas que le matériel fonctionne, et implicitement le driver?

Hors ligne

#12 23/08/2020 16:25:26

Refuznik
Membre
Inscription : 31/01/2007
Messages : 7 887

Re : fedora n'accroche pas le SSID

Nan en plus pour la 5.2 j'ai vérifié il n'y pas de driver spécifique.
Et puis c'est vrai comme tu dis normalement si tu vois les réseaux normalement il ne devrait pas y avoir de problème de driver.

Sur ta box tu utilises un bouton d’appareillage (désolé, je me rappelle plus le nom exact) ?

#13 23/08/2020 16:49:16

Vagmund
Membre
Inscription : 22/08/2020
Messages : 12

Re : fedora n'accroche pas le SSID

Refuznik a écrit :

Sur ta box tu utilises un bouton d’appareillage (désolé, je me rappelle plus le nom exact) ?

Non pas de bouton d'appareillage sur la box (je ne sais pas non plus comment ça se nomme wink).

Hors ligne

#14 23/08/2020 17:02:32

Refuznik
Membre
Inscription : 31/01/2007
Messages : 7 887

Re : fedora n'accroche pas le SSID

Vu que tu as un blocage sous windows, sous linux as tu testé en débranchant/rebranchant la clef et rebooté la box  ?

#15 23/08/2020 19:00:05

Nicosss
Rédacteur Wiki
Rédacteur Wiki
Lieu : Isère
Inscription : 05/03/2007
Messages : 6 459
Site Web

Re : fedora n'accroche pas le SSID

Ta clef n'est pas branchée sur un hub USB ?

Tu as essayé de débrancher le maximum de périphériques USB ? Dont le récepteur Logitech.

Ta clef branchée et active que retourne

$ sudo rfkill list

F34_64 Gnome-Shell - GA-990FXA-UD3 - Phenom II X6 1100T - NH-D14 - Ati HD 5750 Fanless - 16Go RAM /&/ F33_64 Gnome-Shell - Toshiba Satellite C660D-19X - 8Go RAM
F33_64 - ASRock 960GC-GS FX - AMD FX(tm)-8300 - 16Go RAM

Hors ligne

#16 23/08/2020 19:54:55

Vagmund
Membre
Inscription : 22/08/2020
Messages : 12

Re : fedora n'accroche pas le SSID

Refuznik a écrit :

Vu que tu as un blocage sous windows, sous linux as tu testé en débranchant/rebranchant la clef et rebooté la box  ?

Oui, même résultat.

Nicosss a écrit :

Ta clef n'est pas branchée sur un hub USB ?

Non, je n'utilise pas de hub USB. J'ai tout débranché hormis le clavier, et une souris classique. La commande sudo rfkill list renvoie:

1: phy1: Wireless LAN
	Soft blocked: no
	Hard blocked: no 

et le résultat est le même.

Hors ligne

#17 23/08/2020 20:16:26

Nicosss
Rédacteur Wiki
Rédacteur Wiki
Lieu : Isère
Inscription : 05/03/2007
Messages : 6 459
Site Web

Re : fedora n'accroche pas le SSID

Dans un terminal, lance la commande suivante puis tente de te connecter à un réseau et donne nous les logs qui sont apparus

$ sudo journalctl -f

F34_64 Gnome-Shell - GA-990FXA-UD3 - Phenom II X6 1100T - NH-D14 - Ati HD 5750 Fanless - 16Go RAM /&/ F33_64 Gnome-Shell - Toshiba Satellite C660D-19X - 8Go RAM
F33_64 - ASRock 960GC-GS FX - AMD FX(tm)-8300 - 16Go RAM

Hors ligne

#18 23/08/2020 20:56:37

Vagmund
Membre
Inscription : 22/08/2020
Messages : 12

Re : fedora n'accroche pas le SSID

La commande sudo journalctl -f renvoie:

août 23 18:43:30 localhost.localdomain NetworkManager[1006]: <info>  [1598222610.3412] device (wlp0s20u13): Activation: starting connection 'ABCDE' (fc852059-d509-4325-bc8b-0db8a8440f24)
août 23 18:43:30 localhost.localdomain NetworkManager[1006]: <info>  [1598222610.3414] audit: op="connection-activate" uuid="fc852059-d509-4325-bc8b-0db8a8440f24" name="ABCDE" pid=2242 uid=1000 result="success"
août 23 18:43:30 localhost.localdomain NetworkManager[1006]: <info>  [1598222610.3415] device (wlp0s20u13): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
août 23 18:43:30 localhost.localdomain NetworkManager[1006]: <info>  [1598222610.3419] manager: NetworkManager state is now CONNECTING
août 23 18:43:30 localhost.localdomain NetworkManager[1006]: <info>  [1598222610.3444] device (wlp0s20u13): set-hw-addr: reset MAC address to D0:37:45:0B:32:50 (preserve)
août 23 18:43:30 localhost.localdomain NetworkManager[1006]: <info>  [1598222610.3502] device (wlp0s20u13): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
août 23 18:43:30 localhost.localdomain NetworkManager[1006]: <info>  [1598222610.3505] device (wlp0s20u13): Activation: (wifi) access point 'ABCDE' has security, but secrets are required.
août 23 18:43:30 localhost.localdomain NetworkManager[1006]: <info>  [1598222610.3505] device (wlp0s20u13): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
août 23 18:43:30 localhost.localdomain NetworkManager[1006]: <info>  [1598222610.3549] device (wlp0s20u13): supplicant interface state: ready -> disabled
août 23 18:43:30 localhost.localdomain NetworkManager[1006]: <info>  [1598222610.3571] device (wlp0s20u13): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
août 23 18:43:30 localhost.localdomain NetworkManager[1006]: <info>  [1598222610.3575] device (wlp0s20u13): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
août 23 18:43:30 localhost.localdomain NetworkManager[1006]: <info>  [1598222610.3579] device (wlp0s20u13): Activation: (wifi) connection 'ABCDE' has security, and secrets exist.  No new secrets needed.
août 23 18:43:30 localhost.localdomain NetworkManager[1006]: <info>  [1598222610.3579] Config: added 'ssid' value 'ABCDE'
août 23 18:43:30 localhost.localdomain NetworkManager[1006]: <info>  [1598222610.3580] Config: added 'scan_ssid' value '1'
août 23 18:43:30 localhost.localdomain NetworkManager[1006]: <info>  [1598222610.3580] Config: added 'bgscan' value 'simple:30:-70:86400'
août 23 18:43:30 localhost.localdomain NetworkManager[1006]: <info>  [1598222610.3580] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK'
août 23 18:43:30 localhost.localdomain NetworkManager[1006]: <info>  [1598222610.3580] Config: added 'psk' value '<hidden>'
août 23 18:43:30 localhost.localdomain NetworkManager[1006]: <info>  [1598222610.3588] device (wlp0s20u13): supplicant interface state: disabled -> inactive
août 23 18:43:30 localhost.localdomain NetworkManager[1006]: <info>  [1598222610.3670] device (wlp0s20u13): supplicant interface state: inactive -> scanning
août 23 18:43:55 localhost.localdomain NetworkManager[1006]: <warn>  [1598222635.7385] device (wlp0s20u13): Activation: (wifi) association took too long, failing activation
août 23 18:43:55 localhost.localdomain NetworkManager[1006]: <info>  [1598222635.7385] device (wlp0s20u13): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
août 23 18:43:55 localhost.localdomain NetworkManager[1006]: <info>  [1598222635.7388] manager: NetworkManager state is now DISCONNECTED
août 23 18:43:55 localhost.localdomain NetworkManager[1006]: <warn>  [1598222635.7394] device (wlp0s20u13): Activation: failed for connection 'ABCDE'
août 23 18:43:55 localhost.localdomain NetworkManager[1006]: <info>  [1598222635.7395] device (wlp0s20u13): supplicant interface state: scanning -> disconnected
août 23 18:43:55 localhost.localdomain NetworkManager[1006]: <info>  [1598222635.7397] device (wlp0s20u13): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
août 23 18:43:55 localhost.localdomain NetworkManager[1006]: <info>  [1598222635.7443] device (wlp0s20u13): set-hw-addr: set MAC address to 1A:2E:63:C5:37:6E (scanning)
août 23 18:43:55 localhost.localdomain NetworkManager[1006]: <info>  [1598222635.7550] device (wlp0s20u13): supplicant interface state: disconnected -> disabled
août 23 18:43:55 localhost.localdomain NetworkManager[1006]: <info>  [1598222635.7590] device (wlp0s20u13): supplicant interface state: disabled -> disconnected

j'ai juste modifié mon SSID par 'ABCDE'.

De ce que je comprend, l'association prend trop de temps, il doit donc y avoir un timeout, mais pourquoi...:-?

Hors ligne

#19 23/08/2020 21:32:18

Vagmund
Membre
Inscription : 22/08/2020
Messages : 12

Re : fedora n'accroche pas le SSID

Oups, mille excuses Nicosss, j'avais oublié de lancé la commande en su.
Entre temps je me suis 'amusé' à essayer de passer par mon portable en point d'accès, et le résultat est le même, malgré qu'il était totalement ouvert. Voici le résultat de journalctl -f, en root cette fois.

août 23 19:18:49 localhost.localdomain NetworkManager[1006]: <info>  [1598224729.0243] device (wlp0s20u13): Activation: starting connection 'ABCDE' (dbdccd11-08a9-43cf-af46-d0cb88af1bac)
août 23 19:18:49 localhost.localdomain NetworkManager[1006]: <info>  [1598224729.0244] audit: op="connection-activate" uuid="dbdccd11-08a9-43cf-af46-d0cb88af1bac" name="ABCDE" pid=1296 uid=1000 result="success"
août 23 19:18:49 localhost.localdomain NetworkManager[1006]: <info>  [1598224729.0245] device (wlp0s20u13): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
août 23 19:18:49 localhost.localdomain NetworkManager[1006]: <info>  [1598224729.0248] manager: NetworkManager state is now CONNECTING
août 23 19:18:49 localhost.localdomain NetworkManager[1006]: <info>  [1598224729.0287] device (wlp0s20u13): set-hw-addr: reset MAC address to D0:37:45:0B:32:50 (preserve)
août 23 19:18:49 localhost.localdomain NetworkManager[1006]: <info>  [1598224729.0340] device (wlp0s20u13): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
août 23 19:18:49 localhost.localdomain NetworkManager[1006]: <info>  [1598224729.0343] device (wlp0s20u13): Activation: (wifi) connection 'ABCDE' requires no security.  No secrets needed.
août 23 19:18:49 localhost.localdomain NetworkManager[1006]: <info>  [1598224729.0343] Config: added 'ssid' value 'VagmundsCellPhone'
août 23 19:18:49 localhost.localdomain NetworkManager[1006]: <info>  [1598224729.0343] Config: added 'scan_ssid' value '1'
août 23 19:18:49 localhost.localdomain NetworkManager[1006]: <info>  [1598224729.0343] Config: added 'bgscan' value 'simple:30:-70:86400'
août 23 19:18:49 localhost.localdomain NetworkManager[1006]: <info>  [1598224729.0343] Config: added 'key_mgmt' value 'NONE'
août 23 19:18:49 localhost.localdomain NetworkManager[1006]: <info>  [1598224729.0404] device (wlp0s20u13): supplicant interface state: inactive -> disabled
août 23 19:18:49 localhost.localdomain NetworkManager[1006]: <info>  [1598224729.0511] device (wlp0s20u13): supplicant interface state: disabled -> inactive
août 23 19:18:49 localhost.localdomain NetworkManager[1006]: <info>  [1598224729.0569] device (wlp0s20u13): supplicant interface state: inactive -> scanning
août 23 19:18:49 localhost.localdomain wpa_supplicant[1150]: wlp0s20u13: SME: Trying to authenticate with 00:ec:0a:c5:fb:06 (SSID='VagmundsCellPhone' freq=2462 MHz)
août 23 19:18:49 localhost.localdomain kernel: wlp0s20u13: authenticate with 00:ec:0a:c5:fb:06
août 23 19:18:49 localhost.localdomain kernel: wlp0s20u13: send auth to 00:ec:0a:c5:fb:06 (try 1/3)
août 23 19:18:49 localhost.localdomain NetworkManager[1006]: <info>  [1598224729.7801] device (wlp0s20u13): supplicant interface state: scanning -> authenticating
août 23 19:18:49 localhost.localdomain kernel: wlp0s20u13: send auth to 00:ec:0a:c5:fb:06 (try 2/3)
août 23 19:18:50 localhost.localdomain kernel: wlp0s20u13: send auth to 00:ec:0a:c5:fb:06 (try 3/3)
août 23 19:18:50 localhost.localdomain kernel: wlp0s20u13: authentication with 00:ec:0a:c5:fb:06 timed out
août 23 19:18:50 localhost.localdomain wpa_supplicant[1150]: wlp0s20u13: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="VagmundsCellPhone" auth_failures=1 duration=10 reason=CONN_FAILED
août 23 19:18:50 localhost.localdomain NetworkManager[1006]: <info>  [1598224730.4114] device (wlp0s20u13): supplicant interface state: authenticating -> disconnected
août 23 19:18:55 localhost.localdomain systemd[1]: fprintd.service: Succeeded.
août 23 19:18:55 localhost.localdomain audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=fprintd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
août 23 19:19:00 localhost.localdomain NetworkManager[1006]: <info>  [1598224740.4157] device (wlp0s20u13): supplicant interface state: disconnected -> scanning
août 23 19:19:01 localhost.localdomain wpa_supplicant[1150]: wlp0s20u13: CTRL-EVENT-SSID-REENABLED id=0 ssid="VagmundsCellPhone"
août 23 19:19:01 localhost.localdomain wpa_supplicant[1150]: wlp0s20u13: SME: Trying to authenticate with 00:ec:0a:c5:fb:06 (SSID='VagmundsCellPhone' freq=2462 MHz)
août 23 19:19:01 localhost.localdomain kernel: wlp0s20u13: authenticate with 00:ec:0a:c5:fb:06
août 23 19:19:01 localhost.localdomain kernel: wlp0s20u13: send auth to 00:ec:0a:c5:fb:06 (try 1/3)
août 23 19:19:01 localhost.localdomain NetworkManager[1006]: <info>  [1598224741.1366] device (wlp0s20u13): supplicant interface state: scanning -> authenticating
août 23 19:19:01 localhost.localdomain kernel: wlp0s20u13: send auth to 00:ec:0a:c5:fb:06 (try 2/3)
août 23 19:19:01 localhost.localdomain kernel: wlp0s20u13: send auth to 00:ec:0a:c5:fb:06 (try 3/3)
août 23 19:19:01 localhost.localdomain kernel: wlp0s20u13: authentication with 00:ec:0a:c5:fb:06 timed out
août 23 19:19:01 localhost.localdomain wpa_supplicant[1150]: wlp0s20u13: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="VagmundsCellPhone" auth_failures=2 duration=20 reason=CONN_FAILED
août 23 19:19:01 localhost.localdomain NetworkManager[1006]: <info>  [1598224741.7713] device (wlp0s20u13): supplicant interface state: authenticating -> disconnected
août 23 19:19:11 localhost.localdomain NetworkManager[1006]: <info>  [1598224751.7768] device (wlp0s20u13): supplicant interface state: disconnected -> scanning
août 23 19:19:14 localhost.localdomain NetworkManager[1006]: <warn>  [1598224754.7379] device (wlp0s20u13): Activation: (wifi) association took too long, failing activation
août 23 19:19:14 localhost.localdomain NetworkManager[1006]: <info>  [1598224754.7379] device (wlp0s20u13): state change: config -> failed (reason 'ssid-not-found', sys-iface-state: 'managed')
août 23 19:19:14 localhost.localdomain NetworkManager[1006]: <info>  [1598224754.7383] manager: NetworkManager state is now DISCONNECTED
août 23 19:19:14 localhost.localdomain NetworkManager[1006]: <warn>  [1598224754.7398] device (wlp0s20u13): Activation: failed for connection 'ABCDE'
août 23 19:19:14 localhost.localdomain NetworkManager[1006]: <info>  [1598224754.7402] device (wlp0s20u13): state change: failed -> disconnected (reason 'none', sys-iface-state: 'managed')
août 23 19:19:14 localhost.localdomain NetworkManager[1006]: <info>  [1598224754.7460] device (wlp0s20u13): set-hw-addr: set MAC address to DE:91:8E:2B:4B:37 (scanning)
août 23 19:19:14 localhost.localdomain NetworkManager[1006]: <info>  [1598224754.7584] device (wlp0s20u13): supplicant interface state: scanning -> disabled
août 23 19:19:14 localhost.localdomain NetworkManager[1006]: <info>  [1598224754.7669] device (wlp0s20u13): supplicant interface state: disabled -> inactive
août 23 19:19:14 localhost.localdomain wpa_supplicant[1150]: wlp0s20u13: Reject scan trigger since one is already pending

Je me suis également rendu compte qu'en 5GHz, le SSID n'est même pas vu.

Hors ligne

#20 23/08/2020 21:53:16

Vagmund
Membre
Inscription : 22/08/2020
Messages : 12

Re : fedora n'accroche pas le SSID

Refuznic, Nicosss, merci de votre aide pour aujourd'hui. Je vais vous laisser, et espère reprendre la suite demain soir après le boulot.

Hors ligne

#21 13/09/2020 17:49:25

Vagmund
Membre
Inscription : 22/08/2020
Messages : 12

Re : fedora n'accroche pas le SSID

Bonjour à tous,

Après bien trois semaines je viens vous tenir au courant, mais ne vous réjouissez pas (pour ceux dans la même situation), je n'ai pas trouvé de solution...

Rien n'y fait, je n'ai pas réussi à la faire fonctionner. J'ai installé une version plus récente de wpa_supplicant, et été sur divers forums, mais apparemment le problème viendrait du fait que la puce utilisé serait trop récente (j'avais le même problème avec une autre clé plus ancienne, mais bon).

Du coup, j'ai contourné le problème, en allant à la cave ressortir un adapteur CPL.

Il n'y a pas longtemps j'ai vu passé une mise à jour de Network Manager, et j'ai retesté mais même issue.

Encore merci à ceux qui ont tenté d'apporter une solution! smile

Hors ligne

Pied de page des forums