Fedora-Fr - Communauté francophone Fedora - Linux

Communauté francophone des utilisateurs de la distribution Linux Fedora.

  

Dernière news : Venez tester Fedora 30 Beta !

#1 29/12/2018 17:52:53

enerbreiz
Membre
Lieu : Région de Saint-Malo
Inscription : 03/08/2010
Messages : 70

[Résolu] lecture DVD sur ASUS N61VG

bonjour,
je viens d'installer fedora 29 en dualboot (BIOS) Win10 sur portable ASUS N61VG et il semble que mon lecteur DVD ne soit pas reconnu sans doute faut-il installer le pilote?
Le lecteur DVD est un Optiarc DVD RW AD-7580S.
Merci pour vos conseils.

Cordialement roll

Hors ligne

#2 29/12/2018 18:25:48

Refuznik
Membre
Inscription : 31/01/2007
Messages : 7 246

Re : [Résolu] lecture DVD sur ASUS N61VG

Nan les dvd sont reconnu sans problème sous linux. Par contre ce que je suppose c'est que c'est un dvd film donc il te faut installer les codecs https://doc.fedora-fr.org/wiki/Lecture_ … m%C3%A9dia
Perso. je te conseille gstreamer et VLC

Et surtout lire jusqu'en bas  --> Lecture de DVD chiffrés.

Dernière modification par Refuznik (29/12/2018 18:27:43)

Hors ligne

#3 29/12/2018 19:13:42

enerbreiz
Membre
Lieu : Région de Saint-Malo
Inscription : 03/08/2010
Messages : 70

Re : [Résolu] lecture DVD sur ASUS N61VG

ça ne marche pas, tout est installé ce n'est pas un pb de lecture de dvd mais de reconnaissance du lecteur qui semble "tourner à vide"!!
clt

Hors ligne

#4 29/12/2018 19:38:50

Nicosss
Membre
Lieu : Isère
Inscription : 05/03/2007
Messages : 4 524
Site Web

Re : [Résolu] lecture DVD sur ASUS N61VG

Que retourne

$ lspci
$ dmesg
$ ls /dev/

F29_64 Gnome-Shell - GA-990FXA-UD3 - Phenom II X6 1100T - NH-D14 - Ati HD 5750 Fanless - 16Go RAM /&/ F29_64 Gnome-Shell - Toshiba Satellite C660D-19X - 8Go RAM
F29_64 - ASRock 960GC-GS FX - AMD FX(tm)-8300 - 16Go RAM

Hors ligne

#5 29/12/2018 22:18:29

enerbreiz
Membre
Lieu : Région de Saint-Malo
Inscription : 03/08/2010
Messages : 70

Re : [Résolu] lecture DVD sur ASUS N61VG

00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
01:00.0 VGA compatible controller: NVIDIA Corporation G96M [GeForce GT 220M] (rev a1)
03:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
06:00.0 Ethernet controller: Qualcomm Atheros AR8131 Gigabit Ethernet (rev c0)

Hors ligne

#6 29/12/2018 22:23:43

enerbreiz
Membre
Lieu : Région de Saint-Malo
Inscription : 03/08/2010
Messages : 70

Re : [Résolu] lecture DVD sur ASUS N61VG

lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
01:00.0 VGA compatible controller: NVIDIA Corporation G96M [GeForce GT 220M] (rev a1)
03:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
06:00.0 Ethernet controller: Qualcomm Atheros AR8131 Gigabit Ethernet (rev c0)
[renebayle@manjaro ~]$ 

Hors ligne

#7 29/12/2018 22:27:20

enerbreiz
Membre
Lieu : Région de Saint-Malo
Inscription : 03/08/2010
Messages : 70

Re : [Résolu] lecture DVD sur ASUS N61VG

[code]dmesg
[    0.000000] microcode: microcode updated early to revision 0xa0b, date = 2010-09-28
[    0.000000] Linux version 4.19.10-300.fc29.x86_64 (mockbuild@bkernel03.phx2.fedoraproject.org) (gcc version 8.2.1 20181105 (Red Hat 8.2.1-5) (GCC)) #1 SMP Mon Dec 17 15:34:44 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.10-300.fc29.x86_64 root=UUID=2b5ee458-a2d4-4974-ae55-a32ca80a22b5 ro resume=UUID=bf9b5d72-7a49-4c9a-9609-81e1d5ae5b2f rhgb quiet LANG=fr_FR.UTF-8
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e1000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bffa0000-0x00000000bffaefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bffaf000-0x00000000bffdffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: ASUSTeK Computer Inc.         N61Vg               /N61Vg     , BIOS 207     08/31/2009
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2133.420 MHz processor
[    0.003600] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.003603] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.003609] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.003615] MTRR default type: uncachable
[    0.003616] MTRR fixed ranges enabled:
[    0.003618]   00000-9FFFF write-back
[    0.003619]   A0000-BFFFF uncachable
[    0.003620]   C0000-CFFFF write-protect
[    0.003621]   D0000-DFFFF uncachable
[    0.003622]   E0000-EFFFF write-through
[    0.003623]   F0000-FFFFF write-protect
[    0.003624] MTRR variable ranges enabled:
[    0.003625]   0 base 000000000 mask F00000000 write-back
[    0.003627]   1 base 100000000 mask FC0000000 write-back
[    0.003628]   2 base 0C0000000 mask FC0000000 uncachable
[    0.003629]   3 disabled
[    0.003629]   4 disabled
[    0.003630]   5 disabled
[    0.003631]   6 disabled
[    0.003631]   7 disabled
[    0.004645] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.004733] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.004739] last_pfn = 0xbffa0 max_arch_pfn = 0x400000000
[    0.018233] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [(____ptrval____)]
[    0.025028] Base memory trampoline at [(____ptrval____)] 98000 size 24576
[    0.025034] BRK [0x72e01000, 0x72e01fff] PGTABLE
[    0.025037] BRK [0x72e02000, 0x72e02fff] PGTABLE
[    0.025038] BRK [0x72e03000, 0x72e03fff] PGTABLE
[    0.025072] BRK [0x72e04000, 0x72e04fff] PGTABLE
[    0.025075] BRK [0x72e05000, 0x72e05fff] PGTABLE
[    0.025238] RAMDISK: [mem 0x355d2000-0x36ae0fff]
[    0.025248] ACPI: Early table checksum verification disabled
[    0.025331] ACPI: RSDP 0x00000000000F9420 000024 (v02 _ASUS_)
[    0.025335] ACPI: XSDT 0x00000000BFFA0100 000084 (v01 _ASUS_ Notebook 20090831 MSFT 00000097)
[    0.025342] ACPI: FACP 0x00000000BFFA0290 0000F4 (v03 _ASUS_ FACP1424 20090831 MSFT 00000097)
[    0.025348] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20180810/tbfadt-569)
[    0.025352] ACPI: DSDT 0x00000000BFFA0690 00BDCB (v01 N61V0  N61V0207 00000207 INTL 20051117)
[    0.025357] ACPI: FACS 0x00000000BFFAF000 000040
[    0.025361] ACPI: FACS 0x00000000BFFAF000 000040
[    0.025365] ACPI: APIC 0x00000000BFFA0390 00006C (v01 _ASUS_ APIC1424 20090831 MSFT 00000097)
[    0.025369] ACPI: MCFG 0x00000000BFFA0440 00003C (v01 _ASUS_ OEMMCFG  20090831 MSFT 00000097)
[    0.025374] ACPI: SLIC 0x00000000BFFA0480 000176 (v01 _ASUS_ Notebook 20090831 MSFT 00000097)
[    0.025378] ACPI: ECDT 0x00000000BFFA0630 000054 (v01 _ASUS_ OEMECDT  20090831 MSFT 00000097)
[    0.025383] ACPI: DBGP 0x00000000BFFA0400 000034 (v01 _ASUS_ DBGP1424 20090831 MSFT 00000097)
[    0.025387] ACPI: BOOT 0x00000000BFFA0600 000028 (v01 _ASUS_ BOOT1424 20090831 MSFT 00000097)
[    0.025392] ACPI: OEMB 0x00000000BFFAF040 000071 (v01 _ASUS_ OEMB1424 20090831 MSFT 00000097)
[    0.025396] ACPI: HPET 0x00000000BFFAC460 000038 (v01 _ASUS_ OEMHPET  20090831 MSFT 00000097)
[    0.025401] ACPI: DMAR 0x00000000BFFAF0C0 000108 (v01 _ASUS_ DMAR1424 20090831 MSFT 00000097)
[    0.025405] ACPI: ATKG 0x00000000BFFAF3D0 008024 (v01 _ASUS_ OEMATKG  20090603 MSFT 00000097)
[    0.025410] ACPI: SSDT 0x00000000BFFB7EE0 0004F0 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.025424] ACPI: Local APIC address 0xfee00000
[    0.025542] No NUMA configuration found
[    0.025544] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.025558] NODE_DATA(0) allocated [mem 0x13ffd2000-0x13fffcfff]
[    0.046028] Zone ranges:
[    0.046031]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.046034]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.046035]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.046037]   Device   empty
[    0.046038] Movable zone start for each node
[    0.046042] Early memory node ranges
[    0.046043]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.046044]   node   0: [mem 0x0000000000100000-0x00000000bff9ffff]
[    0.046045]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.046051] Reserved but unavailable: 99 pages
[    0.046053] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.046056] On node 0 totalpages: 1048381
[    0.046057]   DMA zone: 64 pages used for memmap
[    0.046058]   DMA zone: 21 pages reserved
[    0.046059]   DMA zone: 3997 pages, LIFO batch:0
[    0.046196]   DMA32 zone: 12223 pages used for memmap
[    0.046197]   DMA32 zone: 782240 pages, LIFO batch:63
[    0.072899]   Normal zone: 4096 pages used for memmap
[    0.072901]   Normal zone: 262144 pages, LIFO batch:63
[    0.081735] ACPI: PM-Timer IO Port: 0x808
[    0.081738] ACPI: Local APIC address 0xfee00000
[    0.081761] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.081764] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.081766] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.081768] ACPI: IRQ0 used by override.
[    0.081769] ACPI: IRQ9 used by override.
[    0.081771] Using ACPI (MADT) for SMP configuration information
[    0.081773] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.081780] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.081798] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.081800] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.081801] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.081802] PM: Registered nosave memory: [mem 0x000a0000-0x000e0fff]
[    0.081802] PM: Registered nosave memory: [mem 0x000e1000-0x000fffff]
[    0.081804] PM: Registered nosave memory: [mem 0xbffa0000-0xbffaefff]
[    0.081805] PM: Registered nosave memory: [mem 0xbffaf000-0xbffdffff]
[    0.081806] PM: Registered nosave memory: [mem 0xbffe0000-0xbfffffff]
[    0.081806] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[    0.081807] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.081808] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
[    0.081809] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[    0.081811] [mem 0xc0000000-0xfedfffff] available for PCI devices
[    0.081812] Booting paravirtualized kernel on bare hardware
[    0.081817] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.287645] random: get_random_bytes called from start_kernel+0x93/0x549 with crng_init=0
[    0.287658] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.288432] percpu: Embedded 45 pages/cpu @(____ptrval____) s147456 r8192 d28672 u524288
[    0.288440] pcpu-alloc: s147456 r8192 d28672 u524288 alloc=1*2097152
[    0.288441] pcpu-alloc: [0] 0 1 2 3 
[    0.288477] Built 1 zonelists, mobility grouping on.  Total pages: 1031977
[    0.288478] Policy zone: Normal
[    0.288481] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.10-300.fc29.x86_64 root=UUID=2b5ee458-a2d4-4974-ae55-a32ca80a22b5 ro resume=UUID=bf9b5d72-7a49-4c9a-9609-81e1d5ae5b2f rhgb quiet LANG=fr_FR.UTF-8
[    0.345776] Memory: 4008452K/4193524K available (12300K kernel code, 1638K rwdata, 3976K rodata, 2180K init, 4664K bss, 185072K reserved, 0K cma-reserved)
[    0.345918] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.345930] Kernel/User page tables isolation: enabled
[    0.346016] ftrace: allocating 38374 entries in 150 pages
[    0.370452] rcu: Hierarchical RCU implementation.
[    0.370454] rcu: 	RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=4.
[    0.370455] 	Tasks RCU enabled.
[    0.370456] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.374180] NR_IRQS: 65792, nr_irqs: 456, preallocated irqs: 16
[    0.380257] Console: colour VGA+ 80x25
[    0.380263] console [tty0] enabled
[    0.380285] ACPI: Core revision 20180810
[    0.380404] ACPI BIOS Warning (bug): Incorrect checksum in table [ATKG] - 0x05, should be 0x2F (20180810/tbprint-177)
[    0.380554] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.380565] hpet clockevent registered
[    0.380571] APIC: Switch to symmetric I/O mode setup
[    0.380573] DMAR: Host address width 36
[    0.380574] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.380580] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30260 ecap 1000
[    0.380581] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[    0.380585] DMAR: dmar1: reg_base_addr fed93000 ver 1:0 cap c9008020630260 ecap 1000
[    0.380586] DMAR: RMRR base: 0x000000000e1000 end: 0x000000000e3fff
[    0.380587] DMAR: RMRR base: 0x000000bfff0000 end: 0x000000bfffffff
[    0.381008] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.385570] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1ec082f9c4d, max_idle_ns: 440795214608 ns
[    0.385586] Calibrating delay loop (skipped), value calculated using timer frequency.. 4266.84 BogoMIPS (lpj=2133420)
[    0.385589] pid_max: default: 32768 minimum: 301
[    0.385628] Security Framework initialized
[    0.385629] Yama: becoming mindful.
[    0.385634] SELinux:  Initializing.
[    0.387294] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.388383] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.388441] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.388479] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.388833] mce: CPU supports 6 MCE banks
[    0.388844] process: using mwait in idle threads
[    0.388850] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.388851] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.388854] Spectre V2 : Mitigation: Full generic retpoline
[    0.388854] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.388856] Speculative Store Bypass: Vulnerable
[    0.389065] Freeing SMP alternatives memory: 36K
[    0.392572] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     P7450  @ 2.13GHz (family: 0x6, model: 0x17, stepping: 0xa)
[    0.392572] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.392572] ... version:                2
[    0.392572] ... bit width:              40
[    0.392572] ... generic registers:      2
[    0.392572] ... value mask:             000000ffffffffff
[    0.392572] ... max period:             000000007fffffff
[    0.392572] ... fixed-purpose events:   3
[    0.392572] ... event mask:             0000000700000003
[    0.392572] rcu: Hierarchical SRCU implementation.
[    0.392975] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.393059] smp: Bringing up secondary CPUs ...
[    0.393198] x86: Booting SMP configuration:
[    0.393199] .... node  #0, CPUs:      #1
[    0.395642] smp: Brought up 1 node, 2 CPUs
[    0.395642] smpboot: Max logical packages: 2
[    0.395642] smpboot: Total of 2 processors activated (8533.68 BogoMIPS)
[    0.397627] devtmpfs: initialized
[    0.397661] x86/mm: Memory block size: 128MB
[    0.398220] PM: Registering ACPI NVS region [mem 0xbffaf000-0xbffdffff] (200704 bytes)
[    0.398220] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.398220] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.398220] pinctrl core: initialized pinctrl subsystem
[    0.398707] RTC time: 16:21:24, date: 12/29/18
[    0.398872] NET: Registered protocol family 16
[    0.399002] audit: initializing netlink subsys (disabled)
[    0.399010] audit: type=2000 audit(1546100484.018:1): state=initialized audit_enabled=0 res=1
[    0.399010] cpuidle: using governor menu
[    0.399010] Simple Boot Flag at 0x51 set to 0x1
[    0.399010] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.399010] ACPI: bus type PCI registered
[    0.399010] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.399010] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.399010] PCI: not using MMCONFIG
[    0.399010] PCI: Using configuration type 1 for base access
[    0.401606] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.401617] cryptd: max_cpu_qlen set to 1000
[    0.401699] ACPI: Added _OSI(Module Device)
[    0.401700] ACPI: Added _OSI(Processor Device)
[    0.401701] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.401702] ACPI: Added _OSI(Processor Aggregator Device)
[    0.401704] ACPI: Added _OSI(Linux-Dell-Video)
[    0.401705] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.401709] ACPI: EC: EC started
[    0.401710] ACPI: EC: interrupt blocked
[    0.401723] ACPI: \: Used as first EC
[    0.401725] ACPI: \: GPE=0x1b, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.401727] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.410035] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.413460] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.419865] ACPI: Dynamic OEM Table Load:
[    0.419872] ACPI: SSDT 0xFFFF8FF73AA69000 000206 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.420218] ACPI: Dynamic OEM Table Load:
[    0.420225] ACPI: SSDT 0xFFFF8FF73A966800 000765 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.420951] ACPI: Dynamic OEM Table Load:
[    0.420957] ACPI: SSDT 0xFFFF8FF73A94B200 0000CC (v01 PmRef  Cpu1Ist  00003000 INTL 20051117)
[    0.421166] ACPI: Dynamic OEM Table Load:
[    0.421171] ACPI: SSDT 0xFFFF8FF73A953600 000085 (v01 PmRef  Cpu1Cst  00003000 INTL 20051117)
[    0.421577] ACPI: Interpreter enabled
[    0.421606] ACPI: (supports S0 S3 S4 S5)
[    0.421607] ACPI: Using IOAPIC for interrupt routing
[    0.421651] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.423039] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.423047] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[    0.423672] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.424006] ACPI: Enabled 13 GPEs in block 00 to 3F
[    0.432454] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.432460] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.432701] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[    0.432933] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.432934] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.433225] PCI host bridge to bus 0000:00
[    0.433228] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.433230] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.433232] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.433234] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.433236] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[    0.433239] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.433249] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[    0.433275] DMAR: Disabling IOMMU for graphics on this chipset
[    0.433275] DMAR: Forcing write-buffer flush capability
[    0.433369] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
[    0.433414] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.433553] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.433622] pci 0000:00:1a.0: reg 0x20: [io  0xbc00-0xbc1f]
[    0.433773] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.433838] pci 0000:00:1a.1: reg 0x20: [io  0xb880-0xb89f]
[    0.433989] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[    0.434054] pci 0000:00:1a.2: reg 0x20: [io  0xb800-0xb81f]
[    0.434214] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.434243] pci 0000:00:1a.7: reg 0x10: [mem 0xf9fffc00-0xf9ffffff]
[    0.434353] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.434467] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.434499] pci 0000:00:1b.0: reg 0x10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
[    0.434616] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.434728] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.434837] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.434962] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[    0.435079] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.435201] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[    0.435322] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.435449] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[    0.435569] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.435698] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.435762] pci 0000:00:1d.0: reg 0x20: [io  0xb480-0xb49f]
[    0.435912] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.435977] pci 0000:00:1d.1: reg 0x20: [io  0xb400-0xb41f]
[    0.436128] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.436192] pci 0000:00:1d.2: reg 0x20: [io  0xb080-0xb09f]
[    0.436351] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.436380] pci 0000:00:1d.7: reg 0x10: [mem 0xf9fff800-0xf9fffbff]
[    0.436490] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.436601] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.436772] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[    0.437005] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[    0.437034] pci 0000:00:1f.2: reg 0x10: [io  0xb000-0xb007]
[    0.437045] pci 0000:00:1f.2: reg 0x14: [io  0xac00-0xac03]
[    0.437056] pci 0000:00:1f.2: reg 0x18: [io  0xa880-0xa887]
[    0.437067] pci 0000:00:1f.2: reg 0x1c: [io  0xa800-0xa803]
[    0.437079] pci 0000:00:1f.2: reg 0x20: [io  0xa480-0xa49f]
[    0.437090] pci 0000:00:1f.2: reg 0x24: [mem 0xf9fff000-0xf9fff7ff]
[    0.437155] pci 0000:00:1f.2: PME# supported from D3hot
[    0.437327] pci 0000:01:00.0: [10de:0654] type 00 class 0x030000
[    0.437356] pci 0000:01:00.0: reg 0x10: [mem 0xfc000000-0xfcffffff]
[    0.437371] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.437387] pci 0000:01:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit]
[    0.437397] pci 0000:01:00.0: reg 0x24: [io  0xcc00-0xcc7f]
[    0.437408] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[    0.437419] pci 0000:01:00.0: enabling Extended Tags
[    0.437521] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 64.000 Gb/s with 5 GT/s x16 link)
[    0.437607] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.437610] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.437613] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfdefffff]
[    0.437617] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.437678] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.437777] pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
[    0.437824] pci 0000:03:00.0: reg 0x10: [mem 0xfdff0000-0xfdffffff 64bit]
[    0.437991] pci 0000:03:00.0: supports D1
[    0.437993] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.438148] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.438156] pci 0000:00:1c.1:   bridge window [mem 0xfdf00000-0xfdffffff]
[    0.438288] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[    0.438293] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.438298] pci 0000:00:1c.2:   bridge window [mem 0xfe000000-0xfeafffff]
[    0.438305] pci 0000:00:1c.2:   bridge window [mem 0xf6000000-0xf8ffffff 64bit pref]
[    0.438403] pci 0000:06:00.0: [1969:1063] type 00 class 0x020000
[    0.438447] pci 0000:06:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit]
[    0.438463] pci 0000:06:00.0: reg 0x18: [io  0xec00-0xec7f]
[    0.438616] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.438764] pci 0000:00:1c.5: PCI bridge to [bus 06]
[    0.438769] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
[    0.438773] pci 0000:00:1c.5:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.438805] pci_bus 0000:07: extended config space not accessible
[    0.438874] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[    0.438888] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.438890] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.438892] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.438894] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.438896] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[    0.439582] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
[    0.439648] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12)
[    0.439710] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
[    0.439769] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12)
[    0.439831] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
[    0.439891] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
[    0.439954] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
[    0.440016] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
[    0.440260] ACPI: EC: interrupt unblocked
[    0.440283] ACPI: EC: event unblocked
[    0.440294] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1b, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.440296] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.440401] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.440401] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.440401] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.440401] vgaarb: loaded
[    0.440621] SCSI subsystem initialized
[    0.440668] libata version 3.00 loaded.
[    0.440668] ACPI: bus type USB registered
[    0.440668] usbcore: registered new interface driver usbfs
[    0.440668] usbcore: registered new interface driver hub
[    0.440671] usbcore: registered new device driver usb
[    0.440701] pps_core: LinuxPPS API ver. 1 registered
[    0.440702] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.440708] PTP clock support registered
[    0.440764] EDAC MC: Ver: 3.0.0
[    0.440890] PCI: Using ACPI for IRQ routing
[    0.451492] PCI: pci_cache_line_size set to 64 bytes
[    0.451565] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.451566] e820: reserve RAM buffer [mem 0xbffa0000-0xbfffffff]
[    0.451705] NetLabel: Initializing
[    0.451706] NetLabel:  domain hash size = 128
[    0.451706] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.451727] NetLabel:  unlabeled traffic allowed by default
[    0.451732] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.451732] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.451732] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.453603] clocksource: Switched to clocksource tsc-early
[    0.476258] VFS: Disk quotas dquot_6.6.0
[    0.476282] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.476378] pnp: PnP ACPI init
[    0.476510] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[    0.476518] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.476597] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.476653] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.476720] pnp 00:03: Plug and Play ACPI device, IDs ETD0001 PNP0f0e PNP0f0b PNP0f03 PNP0f13 PNP0f12 (active)
[    0.476932] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.476935] system 00:04: [io  0x0800-0x087f] has been reserved
[    0.476941] system 00:04: [io  0x0400-0x041f] has been reserved
[    0.476944] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.476947] system 00:04: [mem 0xf9ffec00-0xf9ffecff window] has been reserved
[    0.476949] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.476951] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.476954] system 00:04: [mem 0xfed45000-0xfed89fff] has been reserved
[    0.476956] system 00:04: [mem 0xfed90000-0xfed90fff] could not be reserved
[    0.476958] system 00:04: [mem 0xfed91000-0xfed91fff] has been reserved
[    0.476961] system 00:04: [mem 0xfed92000-0xfed92fff] has been reserved
[    0.476963] system 00:04: [mem 0xfed93000-0xfed93fff] could not be reserved
[    0.476966] system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.476968] system 00:04: [mem 0xfff00000-0xffffffff] has been reserved
[    0.476974] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.477096] system 00:05: [mem 0xffa00000-0xffbfffff] could not be reserved
[    0.477099] system 00:05: [mem 0xffe00000-0xffffffff] could not be reserved
[    0.477105] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.477186] system 00:06: [mem 0xffc00000-0xffdfffff] has been reserved
[    0.477192] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.477282] system 00:07: [io  0x0250-0x0253] has been reserved
[    0.477284] system 00:07: [io  0x0256-0x025f] has been reserved
[    0.477287] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.477289] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.477292] system 00:07: [mem 0xfec10000-0xfec17fff] has been reserved
[    0.477294] system 00:07: [mem 0xfec18000-0xfec1ffff] has been reserved
[    0.477296] system 00:07: [mem 0xfec20000-0xfec27fff] has been reserved
[    0.477298] system 00:07: [mem 0xfec38000-0xfec3ffff] has been reserved
[    0.477304] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.477404] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    0.477409] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.477764] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.477767] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.477769] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.477771] system 00:09: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.477777] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.477921] pnp: PnP ACPI: found 10 devices
[    0.484445] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.484533] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000
[    0.484554] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[    0.484557] pci 0000:01:00.0: BAR 6: assigned [mem 0xfd000000-0xfd07ffff pref]
[    0.484560] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.484562] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.484565] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfdefffff]
[    0.484568] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.484573] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.484588] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.484594] pci 0000:00:1c.1:   bridge window [mem 0xfdf00000-0xfdffffff]
[    0.484604] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[    0.484607] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.484613] pci 0000:00:1c.2:   bridge window [mem 0xfe000000-0xfeafffff]
[    0.484618] pci 0000:00:1c.2:   bridge window [mem 0xf6000000-0xf8ffffff 64bit pref]
[    0.484625] pci 0000:00:1c.5: PCI bridge to [bus 06]
[    0.484629] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
[    0.484634] pci 0000:00:1c.5:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.484639] pci 0000:00:1c.5:   bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[    0.484647] pci 0000:00:1e.0: PCI bridge to [bus 07]
[    0.484662] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.484664] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.484666] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.484668] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.484670] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xffffffff window]
[    0.484672] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.484673] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfdefffff]
[    0.484675] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.484678] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfdffffff]
[    0.484680] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.484681] pci_bus 0000:04: resource 1 [mem 0xfe000000-0xfeafffff]
[    0.484684] pci_bus 0000:04: resource 2 [mem 0xf6000000-0xf8ffffff 64bit pref]
[    0.484685] pci_bus 0000:06: resource 0 [io  0xe000-0xefff]
[    0.484687] pci_bus 0000:06: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.484689] pci_bus 0000:06: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[    0.484691] pci_bus 0000:07: resource 4 [io  0x0000-0x0cf7 window]
[    0.484693] pci_bus 0000:07: resource 5 [io  0x0d00-0xffff window]
[    0.484695] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.484697] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.484699] pci_bus 0000:07: resource 8 [mem 0xc0000000-0xffffffff window]
[    0.484817] NET: Registered protocol family 2
[    0.485022] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[    0.485055] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.485172] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.485343] TCP: Hash tables configured (established 32768 bind 32768)
[    0.485396] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.485428] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.485532] NET: Registered protocol family 1
[    0.485539] NET: Registered protocol family 44
[    0.486689] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.486698] pci 0000:06:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[    0.486703] PCI: CLS 32 bytes, default 64
[    0.486756] Unpacking initramfs...
[    0.920230] Freeing initrd memory: 21564K
[    0.925236] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.925238] software IO TLB: mapped [mem 0xbbfa0000-0xbffa0000] (64MB)
[    0.926441] Initialise system trusted keyrings
[    0.926453] Key type blacklist registered
[    0.926492] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    0.928704] zbud: loaded
[    0.929436] pstore: using deflate compression
[    1.197274] alg: No test for 842 (842-generic)
[    1.197302] alg: No test for 842 (842-scomp)
[    1.205022] NET: Registered protocol family 38
[    1.205026] Key type asymmetric registered
[    1.205028] Asymmetric key parser 'x509' registered
[    1.205047] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.205090] io scheduler noop registered
[    1.205091] io scheduler deadline registered
[    1.205146] io scheduler cfq registered (default)
[    1.205148] io scheduler mq-deadline registered
[    1.205208] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    1.206334] pcieport 0000:00:01.0: Signaling PME with IRQ 24
[    1.206369] pcieport 0000:00:1c.0: Signaling PME with IRQ 25
[    1.206401] pcieport 0000:00:1c.1: Signaling PME with IRQ 26
[    1.206432] pcieport 0000:00:1c.2: Signaling PME with IRQ 27
[    1.206461] pcieport 0000:00:1c.5: Signaling PME with IRQ 28
[    1.206491] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum)
[    1.206562] pciehp 0000:00:1c.5:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum)
[    1.206628] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.206656] intel_idle: does not run on family 6 model 23
[    1.206817] ACPI: AC Adapter [AC0] (on-line)
[    1.206901] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    1.206917] ACPI: Sleep Button [SLPB]
[    1.206968] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.206975] ACPI: Lid Switch [LID]
[    1.207017] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.207028] ACPI: Power Button [PWRF]
[    1.207386] Monitor-Mwait will be used to enter C-1 state
[    1.207393] Monitor-Mwait will be used to enter C-3 state
[    1.207403] tsc: Marking TSC unstable due to TSC halts in idle
[    1.207458] clocksource: Switched to clocksource hpet
[    1.211540] thermal LNXTHERM:00: registered as thermal_zone0
[    1.211541] ACPI: Thermal Zone [THRM] (55 C)
[    1.211663] battery: ACPI: Battery Slot [BAT0] (battery absent)
[    1.211780] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.214642] Non-volatile memory driver v1.3
[    1.214686] Linux agpgart interface v0.103
[    1.215129] ahci 0000:00:1f.2: version 3.0
[    1.215299] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.215335] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
[    1.215339] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs 
[    1.221364] scsi host0: ahci
[    1.221554] scsi host1: ahci
[    1.221682] scsi host2: ahci
[    1.221797] scsi host3: ahci
[    1.221917] scsi host4: ahci
[    1.222035] scsi host5: ahci
[    1.222083] ata1: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 29
[    1.222085] ata2: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 29
[    1.222086] ata3: DUMMY
[    1.222087] ata4: DUMMY
[    1.222088] ata5: DUMMY
[    1.222090] ata6: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 29
[    1.222193] libphy: Fixed MDIO Bus: probed
[    1.222275] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.222279] ehci-pci: EHCI PCI platform driver
[    1.222384] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    1.222433] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.222450] ehci-pci 0000:00:1a.7: debug port 1
[    1.226352] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[    1.226368] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9fffc00
[    1.233685] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.233874] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.233876] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.233878] usb usb1: Product: EHCI Host Controller
[    1.233880] usb usb1: Manufacturer: Linux 4.19.10-300.fc29.x86_64 ehci_hcd
[    1.233882] usb usb1: SerialNumber: 0000:00:1a.7
[    1.234051] hub 1-0:1.0: USB hub found
[    1.234067] hub 1-0:1.0: 6 ports detected
[    1.235207] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.235257] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.235270] ehci-pci 0000:00:1d.7: debug port 1
[    1.239170] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    1.239182] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9fff800
[    1.245667] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.245722] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.245725] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.245727] usb usb2: Product: EHCI Host Controller
[    1.245730] usb usb2: Manufacturer: Linux 4.19.10-300.fc29.x86_64 ehci_hcd
[    1.245732] usb usb2: SerialNumber: 0000:00:1d.7
[    1.245888] hub 2-0:1.0: USB hub found
[    1.245895] hub 2-0:1.0: 6 ports detected
[    1.246867] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.246871] ohci-pci: OHCI PCI platform driver
[    1.246884] uhci_hcd: USB Universal Host Controller Interface driver
[    1.246965] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.247038] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.247045] uhci_hcd 0000:00:1a.0: detected 2 ports
[    1.247072] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
[    1.247126] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    1.247128] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.247130] usb usb3: Product: UHCI Host Controller
[    1.247132] usb usb3: Manufacturer: Linux 4.19.10-300.fc29.x86_64 uhci_hcd
[    1.247134] usb usb3: SerialNumber: 0000:00:1a.0
[    1.247272] hub 3-0:1.0: USB hub found
[    1.247281] hub 3-0:1.0: 2 ports detected
[    1.247750] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.247823] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.247830] uhci_hcd 0000:00:1a.1: detected 2 ports
[    1.247858] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[    1.247912] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    1.247914] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.247916] usb usb4: Product: UHCI Host Controller
[    1.247918] usb usb4: Manufacturer: Linux 4.19.10-300.fc29.x86_64 uhci_hcd
[    1.247920] usb usb4: SerialNumber: 0000:00:1a.1
[    1.248060] hub 4-0:1.0: USB hub found
[    1.248068] hub 4-0:1.0: 2 ports detected
[    1.248513] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.248594] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    1.248601] uhci_hcd 0000:00:1a.2: detected 2 ports
[    1.248628] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800
[    1.248680] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    1.248682] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.248684] usb usb5: Product: UHCI Host Controller
[    1.248686] usb usb5: Manufacturer: Linux 4.19.10-300.fc29.x86_64 uhci_hcd
[    1.248688] usb usb5: SerialNumber: 0000:00:1a.2
[    1.248814] hub 5-0:1.0: USB hub found
[    1.248822] hub 5-0:1.0: 2 ports detected
[    1.249263] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.249319] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    1.249326] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.249346] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
[    1.249404] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    1.249406] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.249408] usb usb6: Product: UHCI Host Controller
[    1.249410] usb usb6: Manufacturer: Linux 4.19.10-300.fc29.x86_64 uhci_hcd
[    1.249412] usb usb6: SerialNumber: 0000:00:1d.0
[    1.249539] hub 6-0:1.0: USB hub found
[    1.249546] hub 6-0:1.0: 2 ports detected
[    1.250003] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.250060] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    1.250067] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.250087] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[    1.250139] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    1.250141] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.250143] usb usb7: Product: UHCI Host Controller
[    1.250145] usb usb7: Manufacturer: Linux 4.19.10-300.fc29.x86_64 uhci_hcd
[    1.250147] usb usb7: SerialNumber: 0000:00:1d.1
[    1.250272] hub 7-0:1.0: USB hub found
[    1.250280] hub 7-0:1.0: 2 ports detected
[    1.250733] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.250790] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    1.250797] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.250817] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080
[    1.250869] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    1.250871] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.250873] usb usb8: Product: UHCI Host Controller
[    1.250875] usb usb8: Manufacturer: Linux 4.19.10-300.fc29.x86_64 uhci_hcd
[    1.250877] usb usb8: SerialNumber: 0000:00:1d.2
[    1.251014] hub 8-0:1.0: USB hub found
[    1.251021] hub 8-0:1.0: 2 ports detected
[    1.251448] usbcore: registered new interface driver usbserial_generic
[    1.251455] usbserial: USB Serial support registered for generic
[    1.251504] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.255734] i8042: Detected active multiplexing controller, rev 1.1
[    1.257203] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.257209] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.257244] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.257276] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.257306] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.257425] mousedev: PS/2 mouse device common for all mice
[    1.257665] rtc_cmos 00:01: RTC can wake from S4
[    1.257845] rtc_cmos 00:01: registered as rtc0
[    1.257848] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.257921] device-mapper: uevent: version 1.0.3
[    1.258004] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    1.258328] hidraw: raw HID events driver (C) Jiri Kosina
[    1.258380] usbcore: registered new interface driver usbhid
[    1.258381] usbhid: USB HID core driver
[    1.258507] drop_monitor: Initializing network drop monitor service
[    1.258675] Initializing XFRM netlink socket
[    1.258852] NET: Registered protocol family 10
[    1.262335] Segment Routing with IPv6
[    1.262363] mip6: Mobile IPv6
[    1.262366] NET: Registered protocol family 17
[    1.262637] RAS: Correctable Errors collector initialized.
[    1.262679] microcode: sig=0x1067a, pf=0x80, revision=0xa0b
[    1.262723] microcode: Microcode Update Driver: v2.2.
[    1.262897] registered taskstats version 1
[    1.262908] Loading compiled-in X.509 certificates
[    1.298390] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.326956] Loaded X.509 cert 'Fedora kernel signing key: 4a1e116b31c0483143cc42c03e927907c47efc8e'
[    1.326977] zswap: loaded using pool lzo/zbud
[    1.330165] Key type big_key registered
[    1.332948] Key type encrypted registered
[    1.332957] ima: No TPM chip found, activating TPM-bypass!
[    1.332963] ima: Allocated hash algorithm: sha1
[    1.333408]   Magic number: 14:736:389
[    1.333421] usb usb7: hash matches
[    1.333594] rtc_cmos 00:01: setting system clock to 2018-12-29 16:21:25 UTC (1546100485)
[    1.531245] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.532403] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.532668] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    1.532671] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.558665] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.566599] usb 2-2: new high-speed USB device number 2 using ehci-pci
[    1.581065] ata1.00: ATA-8: ST9500325AS, 0002SDM1, max UDMA/133
[    1.581067] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32)
[    1.583183] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.583503] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    1.583505] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.584888] random: fast init done
[    1.585424] ata1.00: configured for UDMA/133
[    1.598201] scsi 0:0:0:0: Direct-Access     ATA      ST9500325AS      SDM1 PQ: 0 ANSI: 5
[    1.598483] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.598536] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.598558] sd 0:0:0:0: [sda] Write Protect is off
[    1.598561] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.598650] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.653690]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[    1.654406] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.697628] usb 2-2: New USB device found, idVendor=2109, idProduct=2812, bcdDevice= b.e0
[    1.697630] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.697632] usb 2-2: Product: USB2.0 Hub             
[    1.697634] usb 2-2: Manufacturer: VIA Labs, Inc.         
[    1.698028] hub 2-2:1.0: USB hub found
[    1.698374] hub 2-2:1.0: 4 ports detected
[    1.730797] usb 1-1: New USB device found, idVendor=04f2, idProduct=b071, bcdDevice=15.15
[    1.730800] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    1.730801] usb 1-1: Product: CNF7129
[    1.730803] usb 1-1: Manufacturer: Chicony Electronics Co., Ltd.
[    1.730805] usb 1-1: SerialNumber: SN0001
[    1.819600] usb 2-3: new high-speed USB device number 3 using ehci-pci
[    1.907021] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.921993] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    1.921996] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.935083] ata2.00: ATAPI: Optiarc DVD RW AD-7580S, FX20, max UDMA/100
[    1.951192] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    1.951196] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.965729] ata2.00: configured for UDMA/100
[    1.970307] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7580S  FX20 PQ: 0 ANSI: 5
[    2.015639] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.015640] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.015784] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.015855] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.038615] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[    2.045009] usb 2-3: New USB device found, idVendor=18a5, idProduct=0302, bcdDevice= 1.07
[    2.045011] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.045013] usb 2-3: SerialNumber: 12112258051066
[    2.157659] usb 2-2.1: new low-speed USB device number 4 using ehci-pci
[    2.213027] usb 5-1: New USB device found, idVendor=0b05, idProduct=1751, bcdDevice= 2.35
[    2.213029] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.213031] usb 5-1: Product: BT-253
[    2.213033] usb 5-1: Manufacturer: Broadcom Corp
[    2.213035] usb 5-1: SerialNumber: 002243D52AEE
[    2.293878] usb 2-2.1: New USB device found, idVendor=046d, idProduct=c06a, bcdDevice=63.00
[    2.293880] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.293882] usb 2-2.1: Product: USB Optical Mouse
[    2.293884] usb 2-2.1: Manufacturer: Logitech
[    2.296691] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2.1/2-2.1:1.0/0003:046D:C06A.0001/input/input12
[    2.296870] hid-generic 0003:046D:C06A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.7-2.1/input0
[    2.322601] ata6: SATA link down (SStatus 0 SControl 300)
[    2.373662] usb 2-2.3: new full-speed USB device number 5 using ehci-pci
[    2.499757] usb 2-2.3: New USB device found, idVendor=03f0, idProduct=1604, bcdDevice= 1.00
[    2.499759] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.499761] usb 2-2.3: Product: DeskJet 940C
[    2.499763] usb 2-2.3: Manufacturer: Hewlett-Packard
[    2.499765] usb 2-2.3: SerialNumber: CN17Q6C0NHBH
[    2.572448] psmouse serio4: elantech: assuming hardware version 2 (with firmware version 0x040201)
[    2.609184] psmouse serio4: elantech: Synaptics capabilities query result 0x78, 0x14, 0x0b.
[    2.645993] psmouse serio4: elantech: Elan sample query result 1f, 00, 00
[    2.776056] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input11
[    2.778967] Unstable clock detected, switching default tracing clock to "global"
               If you want to keep using the local clock, then add:
                 "trace_clock=local"
               on the kernel command line
[    2.781958] Freeing unused decrypted memory: 2040K
[    2.783978] Freeing unused kernel image memory: 2180K
[    2.788704] Write protecting the kernel read-only data: 18432k
[    2.789909] Freeing unused kernel image memory: 2012K
[    2.790053] Freeing unused kernel image memory: 120K
[    2.804757] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.804766] rodata_test: all tests were successful
[    2.804864] x86/mm: Checking user space page tables
[    2.818681] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.818686] Run /init as init process
[    2.837734] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    2.850780] systemd[1]: Detected architecture x86-64.
[    2.850785] systemd[1]: Running in initial RAM disk.
[    2.853725] systemd[1]: Set hostname to <localhost.localdomain>.
[    2.941395] random: systemd: uninitialized urandom read (16 bytes read)
[    2.941492] systemd[1]: Listening on udev Kernel Socket.
[    2.941593] random: systemd: uninitialized urandom read (16 bytes read)
[    2.941709] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.941733] random: systemd: uninitialized urandom read (16 bytes read)
[    2.941748] systemd[1]: Reached target Swap.
[    2.941905] systemd[1]: Listening on Journal Socket.
[    2.944920] systemd[1]: Starting Setup Virtual Console...
[    2.946254] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    3.094265] audit: type=1130 audit(1546100487.259:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.113111] audit: type=1130 audit(1546100487.278:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.113116] audit: type=1131 audit(1546100487.278:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.202780] audit: type=1130 audit(1546100487.366:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.237224] audit: type=1130 audit(1546100487.402:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.268631] audit: type=1130 audit(1546100487.428:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.405458] audit: type=1130 audit(1546100487.570:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.429745] audit: type=1130 audit(1546100487.594:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.489413] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    3.501712] acpi device:39: registered as cooling_device2
[    3.501790] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/LNXVIDEO:00/input/input13
[    3.543301] atl1c 0000:06:00.0: version 1.0.1.1-NAPI
[    3.551141] usb-storage 2-3:1.0: USB Mass Storage device detected
[    3.563638] scsi host6: usb-storage 2-3:1.0
[    3.563775] usbcore: registered new interface driver usb-storage
[    3.567312] usbcore: registered new interface driver uas
[    3.712059] atl1c 0000:06:00.0 enp6s0: renamed from eth0
[    3.906599] nouveau 0000:01:00.0: NVIDIA G96 (096a00c1)
[    3.958484] nouveau 0000:01:00.0: bios: version 62.94.92.00.0d
[    3.980260] nouveau 0000:01:00.0: bios: M0203T not found
[    3.980262] nouveau 0000:01:00.0: bios: M0203E not matched!
[    3.980264] nouveau 0000:01:00.0: fb: 1024 MiB DDR2
[    4.055110] [TTM] Zone  kernel: Available graphics memory: 2018202 kiB
[    4.055112] [TTM] Initializing pool allocator
[    4.055119] [TTM] Initializing DMA pool allocator
[    4.055148] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[    4.055150] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    4.055155] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    4.055158] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    4.055160] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000323 00010034
[    4.055163] nouveau 0000:01:00.0: DRM: DCB outp 01: 02011300 00000028
[    4.055166] nouveau 0000:01:00.0: DRM: DCB outp 02: 02022312 00020010
[    4.055168] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000040
[    4.055170] nouveau 0000:01:00.0: DRM: DCB conn 01: 00000100
[    4.055172] nouveau 0000:01:00.0: DRM: DCB conn 02: 00001261
[    4.055174] nouveau 0000:01:00.0: DRM: DCB conn 03: 00000310
[    4.055176] nouveau 0000:01:00.0: DRM: DCB conn 04: 00000311
[    4.055178] nouveau 0000:01:00.0: DRM: DCB conn 05: 00000313
[    4.058107] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.058108] [drm] Driver supports precise vblank timestamp query.
[    4.060600] nouveau 0000:01:00.0: DRM: MM: using CRYPT for buffer copies
[    4.168442] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x70000, bo (____ptrval____)
[    4.168543] fbcon: nouveaufb (fb0) is primary device
[    4.371143] random: crng init done
[    4.371145] random: 7 urandom warning(s) missed due to ratelimiting
[    4.574647] scsi 6:0:0:0: Direct-Access     Verbatim                  8.07 PQ: 0 ANSI: 4
[    4.575009] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    4.576115] sd 6:0:0:0: [sdb] 15257600 512-byte logical blocks: (7.81 GB/7.28 GiB)
[    4.577238] sd 6:0:0:0: [sdb] Write Protect is off
[    4.577240] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[    4.578365] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    5.142535]  sdb: sdb1 sdb2
[    5.146244] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    5.889398] Console: switching to colour frame buffer device 170x48
[    5.891313] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    5.897731] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[    6.129855] audit: type=1130 audit(1546100490.295:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.130876] PM: Image not found (code -22)
[    6.132897] audit: type=1130 audit(1546100490.298:11): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-hibernate-resume@dev-disk-by\x2duuid-bf9b5d72\x2d7a49\x2d4c9a\x2d9609\x2d81e1d5ae5b2f comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.132901] audit: type=1131 audit(1546100490.298:12): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-hibernate-resume@dev-disk-by\x2duuid-bf9b5d72\x2d7a49\x2d4c9a\x2d9609\x2d81e1d5ae5b2f comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.151981] audit: type=1130 audit(1546100490.317:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.431069] audit: type=1130 audit(1546100490.594:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.511773] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    6.787969] audit: type=1130 audit(1546100490.953:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.787973] audit: type=1131 audit(1546100490.953:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.953082] audit: type=1130 audit(1546100491.118:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.968574] audit: type=1131 audit(1546100491.133:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.971258] audit: type=1130 audit(1546100491.136:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.389064] systemd-journald[173]: Received SIGTERM from PID 1 (systemd).
[    7.721744] systemd: 13 output lines suppressed due to ratelimiting
[   10.702844] SELinux:  Class xdp_socket not defined in policy.
[   10.702846] SELinux: the above unknown classes and permissions will be allowed
[   10.702855] SELinux:  policy capability network_peer_controls=1
[   10.702856] SELinux:  policy capability open_perms=1
[   10.702857] SELinux:  policy capability extended_socket_class=1
[   10.702858] SELinux:  policy capability always_check_network=0
[   10.702859] SELinux:  policy capability cgroup_seclabel=1
[   10.702859] SELinux:  policy capability nnp_nosuid_transition=1
[   10.735172] systemd[1]: Successfully loaded SELinux policy in 726.639ms.
[   11.012017] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[   11.112771] systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 50.357ms.
[   11.228314] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[   11.239758] systemd[1]: Detected architecture x86-64.
[   11.247782] systemd[1]: Set hostname to <localhost.localdomain>.
[   15.904508] kauditd_printk_skb: 27 callbacks suppressed
[   15.904509] audit: type=1130 audit(1546096900.069:47): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.904513] audit: type=1131 audit(1546096900.069:48): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.905663] systemd[1]: Stopped Switch Root.
[   15.905937] audit: type=1130 audit(1546096900.071:49): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.905946] audit: type=1131 audit(1546096900.071:50): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.906141] systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart.
[   15.906277] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[   15.906339] systemd[1]: Stopped Journal Service.
[   15.906381] audit: type=1130 audit(1546096900.071:51): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.906390] audit: type=1131 audit(1546096900.071:52): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.908328] systemd[1]: Starting Journal Service...
[   15.908773] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   15.918853] systemd[1]: Listening on Process Core Dump Socket.
[   16.158454] EXT4-fs (sda6): re-mounted. Opts: (null)
[   16.160524] audit: type=1130 audit(1546096900.325:53): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.257899] audit: type=1305 audit(1546096900.423:54): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:syslogd_t:s0 res=1
[   16.259603] systemd-journald[420]: File /run/log/journal/463c2a4fa0f14d8cbdff437f3b7dc66c/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   16.267272] systemd[1]: Started Journal Service.
[   16.269200] audit: type=1130 audit(1546096900.432:55): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.336022] audit: type=1130 audit(1546096900.501:56): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.669202] Adding 4099068k swap on /dev/sda7.  Priority:-2 extents:1 across:4099068k FS
[   16.702610] systemd-journald[420]: Received request to flush runtime journal from PID 1
[   22.137305] kauditd_printk_skb: 9 callbacks suppressed
[   22.137307] audit: type=1130 audit(1546096906.302:66): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-backlight@backlight:acpi_video0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.322281] asus_laptop: Asus Laptop Support version 0.42
[   22.322409] asus_laptop:   N61Vg model detected
[   22.327505] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input14
[   22.541002] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   22.542343] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   22.555041] Bluetooth: Core ver 2.22
[   22.555072] NET: Registered protocol family 31
[   22.555073] Bluetooth: HCI device and connection manager initialized
[   22.555078] Bluetooth: HCI socket layer initialized
[   22.555081] Bluetooth: L2CAP socket layer initialized
[   22.555092] Bluetooth: SCO socket layer initialized
[   22.680825] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMIO) (20180810/utaddress-213)
[   22.680834] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   22.680836] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPIO) (20180810/utaddress-213)
[   22.680841] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   22.680842] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPIO) (20180810/utaddress-213)
[   22.680847] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   22.680847] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   22.856299] usbcore: registered new interface driver btusb
[   23.579328] media: Linux media interface: v0.10
[   23.610941] ath: phy0: Enable LNA combining
[   23.614221] ath: phy0: ASPM enabled: 0x42
[   23.614223] ath: EEPROM regdomain: 0x60
[   23.614224] ath: EEPROM indicates we should expect a direct regpair map
[   23.614226] ath: Country alpha2 being used: 00
[   23.614227] ath: Regpair used: 0x60
[   23.817468] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   23.817472] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   23.817474] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   23.817476] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   23.817478] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   23.817479] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   23.817482] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   23.817484] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   23.833140] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   23.833637] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffac8c40e00000, irq=17
[   23.856187] videodev: Linux video capture interface: v2.00
[   23.972320] intel_powerclamp: No package C-state available
[   24.166048] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   24.166142] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   24.176103] iTCO_vendor_support: vendor-support=0
[   24.183100] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   24.183159] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0860)
[   24.183400] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   24.326596] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
[   24.357005] uvcvideo 1-1:1.0: Entity type for entity Extension 5 was not initialized!
[   24.357009] uvcvideo 1-1:1.0: Entity type for entity Extension 4 was not initialized!
[   24.357011] uvcvideo 1-1:1.0: Entity type for entity Processing 3 was not initialized!
[   24.357013] uvcvideo 1-1:1.0: Entity type for entity Camera 1 was not initialized!
[   24.357120] input: CNF7129: USB2.0 1.3M UVC WebCam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input17
[   24.357246] usbcore: registered new interface driver uvcvideo
[   24.357247] USB Video Class driver (1.1.1)
[   24.373661] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[   24.818184] audit: type=1130 audit(1546096908.983:67): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-backlight@leds:asus::kbd_backlight comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   24.842725] audit: type=1130 audit(1546096909.007:68): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   25.317593] audit: type=1130 audit(1546096909.482:69): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   29.211079] usblp 2-2.3:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x1604
[   29.211117] usbcore: registered new interface driver usblp
[   29.225988] audit: type=1130 audit(1546096913.389:70): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   29.555983] audit: type=1130 audit(1546096913.720:71): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   29.555988] audit: type=1131 audit(1546096913.720:72): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   29.661951] audit: type=1130 audit(1546096913.827:73): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   29.725775] audit: type=1130 audit(1546096913.891:74): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   29.725813] audit: type=1131 audit(1546096913.891:75): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   29.796017] audit: type=1130 audit(1546096913.961:76): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   29.796022] audit: type=1131 audit(1546096913.961:77): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   29.842105] audit: type=1130 audit(1546096914.007:78): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   29.848889] audit: type=1131 audit(1546096914.014:79): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   30.276905] RPC: Registered named UNIX socket transport module.
[   30.276907] RPC: Registered udp transport module.
[   30.276908] RPC: Registered tcp transport module.
[   30.276909] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   37.887990] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   37.887992] Bluetooth: BNEP filters: protocol multicast
[   37.887997] Bluetooth: BNEP socket layer initialized
[   46.946763] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
[   46.960482] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
[   46.968799] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   46.983889] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   47.006012] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   48.855886] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   49.839837] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   50.798704] wlp3s0: authenticate with 00:19:70:a6:f5:ac
[   50.818239] wlp3s0: send auth to 00:19:70:a6:f5:ac (try 1/3)
[   50.822172] wlp3s0: authenticated
[   50.824610] wlp3s0: associate with 00:19:70:a6:f5:ac (try 1/3)
[   50.829451] wlp3s0: RX AssocResp from 00:19:70:a6:f5:ac (capab=0x431 status=0 aid=7)
[   50.829713] wlp3s0: associated
[   50.830058] ath: EEPROM regdomain: 0x80fa
[   50.830059] ath: EEPROM indicates we should expect a country code
[   50.830060] ath: doing EEPROM country->regdmn map search
[   50.830061] ath: country maps to regdmn code: 0x37
[   50.830062] ath: Country alpha2 being used: FR
[   50.830063] ath: Regpair used: 0x37
[   50.830064] ath: regdomain 0x80fa dynamically updated by country element
[   51.228258] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   62.637665] usblp0: removed
[   62.647356] usblp 2-2.3:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x1604
[   63.324985] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   63.347680] tun: Universal TUN/TAP device driver, 1.6
[   63.349861] virbr0: port 1(virbr0-nic) entered blocking state
[   63.349864] virbr0: port 1(virbr0-nic) entered disabled state
[   63.349943] device virbr0-nic entered promiscuous mode
[   63.762688] virbr0: port 1(virbr0-nic) entered blocking state
[   63.762692] virbr0: port 1(virbr0-nic) entered listening state
[   65.278574] virbr0: port 1(virbr0-nic) entered disabled state
[  107.202772] Bluetooth: RFCOMM TTY layer initialized
[  107.202780] Bluetooth: RFCOMM socket layer initialized
[  107.202868] Bluetooth: RFCOMM ver 1.11
[  108.658877] fuse init (API version 7.27)
[  116.832433] rfkill: input handler disabled
[  417.006135] perf: interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[  588.668011] perf: interrupt took too long (3136 > 3130), lowering kernel.perf_event_max_sample_rate to 63000
[  759.745605] perf: interrupt took too long (3933 > 3920), lowering kernel.perf_event_max_sample_rate to 50000
[ 1905.137877] perf: interrupt took too long (4926 > 4916), lowering kernel.perf_event_max_sample_rate to 40000
[ 2995.512161] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
[ 6872.746948] usb 2-2.3: USB disconnect, device number 5
[ 6872.747741] usblp0: removed
[ 6873.704726] usb 2-2.3: new full-speed USB device number 6 using ehci-pci
[ 6873.832704] usb 2-2.3: New USB device found, idVendor=03f0, idProduct=1604, bcdDevice= 1.00
[ 6873.832711] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6873.832716] usb 2-2.3: Product: DeskJet 940C
[ 6873.832722] usb 2-2.3: Manufacturer: Hewlett-Packard
[ 6873.832727] usb 2-2.3: SerialNumber: CN17Q6C0NHBH
[ 6873.844226] usblp 2-2.3:1.0: usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0 pid 0x1604[/code]

Hors ligne

#8 29/12/2018 22:31:52

enerbreiz
Membre
Lieu : Région de Saint-Malo
Inscription : 03/08/2010
Messages : 70

Re : [Résolu] lecture DVD sur ASUS N61VG

ls /dev/
autofs            mqueue              tty0   tty41   ttyS16   usbmon8
block             net                 tty1   tty42   ttyS17   v4l
bsg               network_latency     tty10  tty43   ttyS18   vcs
btrfs-control     network_throughput  tty11  tty44   ttyS19   vcs1
bus               null                tty12  tty45   ttyS2    vcs2
cdrom             nvram               tty13  tty46   ttyS20   vcs3
char              port                tty14  tty47   ttyS21   vcs4
console           ppp                 tty15  tty48   ttyS22   vcs5
core              ptmx                tty16  tty49   ttyS23   vcs6
cpu               pts                 tty17  tty5    ttyS24   vcsa
cpu_dma_latency   random              tty18  tty50   ttyS25   vcsa1
cuse              raw                 tty19  tty51   ttyS26   vcsa2
disk              rfkill              tty2   tty52   ttyS27   vcsa3
dri               rtc                 tty20  tty53   ttyS28   vcsa4
fb0               rtc0                tty21  tty54   ttyS29   vcsa5
fd                sda                 tty22  tty55   ttyS3    vcsa6
full              sda1                tty23  tty56   ttyS30   vcsu
fuse              sda2                tty24  tty57   ttyS31   vcsu1
hidraw0           sda3                tty25  tty58   ttyS4    vcsu2
hpet              sda5                tty26  tty59   ttyS5    vcsu3
hugepages         sda6                tty27  tty6    ttyS6    vcsu4
hwrng             sda7                tty28  tty60   ttyS7    vcsu5
initctl           sdb                 tty29  tty61   ttyS8    vcsu6
input             sdb1                tty3   tty62   ttyS9    vfio
kmsg              sdb2                tty30  tty63   uhid     vga_arbiter
log               sg0                 tty31  tty7    uinput   vhci
loop-control      sg1                 tty32  tty8    urandom  vhost-net
lp0               sg2                 tty33  tty9    usb      vhost-vsock
lp1               shm                 tty34  ttyS0   usbmon0  video0
lp2               snapshot            tty35  ttyS1   usbmon1  video1
lp3               snd                 tty36  ttyS10  usbmon2  watchdog
mapper            sr0                 tty37  ttyS11  usbmon3  watchdog0
mcelog            stderr              tty38  ttyS12  usbmon4  zero
media0            stdin               tty39  ttyS13  usbmon5
mem               stdout              tty4   ttyS14  usbmon6
memory_bandwidth  tty                 tty40  ttyS15  usbmon7

merci votre commentaire
clt

Hors ligne

#9 30/12/2018 00:16:26

Nicosss
Membre
Lieu : Isère
Inscription : 05/03/2007
Messages : 4 524
Site Web

Re : [Résolu] lecture DVD sur ASUS N61VG

Ton lecteur est bien reconnu en tant que /dev/sr0.

Laisse tourner dans un terminal la commande journalctl -f puis insère un DVD et donne le retour des messages.


F29_64 Gnome-Shell - GA-990FXA-UD3 - Phenom II X6 1100T - NH-D14 - Ati HD 5750 Fanless - 16Go RAM /&/ F29_64 Gnome-Shell - Toshiba Satellite C660D-19X - 8Go RAM
F29_64 - ASRock 960GC-GS FX - AMD FX(tm)-8300 - 16Go RAM

Hors ligne

#10 30/12/2018 15:58:58

enerbreiz
Membre
Lieu : Région de Saint-Malo
Inscription : 03/08/2010
Messages : 70

Re : [Résolu] lecture DVD sur ASUS N61VG

[renebayle@manjaro ~]$ journalctl -f
-- Logs begin at Thu 2018-12-27 14:30:54 CET. --
déc. 30 14:54:12 manjaro.home org.gnome.Terminal.desktop[1472]: # watch_established: "/org/gnome/desktop/interface/" (establishing: 1)
déc. 30 14:54:12 manjaro.home org.gnome.Terminal.desktop[1472]: # watch_established: "/org/gnome/settings-daemon/peripherals/mouse/" (establishing: 1)
déc. 30 14:54:12 manjaro.home org.gnome.Terminal.desktop[1472]: # watch_established: "/org/gnome/desktop/sound/" (establishing: 1)
déc. 30 14:54:12 manjaro.home org.gnome.Terminal.desktop[1472]: # watch_established: "/org/gnome/desktop/privacy/" (establishing: 1)
déc. 30 14:54:12 manjaro.home org.gnome.Terminal.desktop[1472]: # watch_established: "/org/gnome/desktop/wm/preferences/" (establishing: 1)
déc. 30 14:54:12 manjaro.home org.gnome.Terminal.desktop[1472]: # watch_established: "/org/gnome/settings-daemon/plugins/xsettings/" (establishing: 1)
déc. 30 14:54:12 manjaro.home org.gnome.Terminal.desktop[1472]: # watch_established: "/org/gnome/desktop/a11y/" (establishing: 1)
déc. 30 14:54:12 manjaro.home org.gnome.Terminal.desktop[1472]: # watch_fast: "/org/gnome/terminal/legacy/" (establishing: 0, active: 0)
déc. 30 14:54:12 manjaro.home org.gnome.Terminal.desktop[1472]: # unwatch_fast: "/org/gnome/terminal/legacy/" (active: 0, establishing: 1)
déc. 30 14:54:12 manjaro.home org.gnome.Terminal.desktop[1472]: # watch_established: "/org/gnome/terminal/legacy/" (establishing: 0)
déc. 30 14:55:20 manjaro.home systemd[1]: Starting dnf makecache...
déc. 30 14:55:22 manjaro.home dnf[2648]: Fedora Modular 29 - x86_64                       16 kB/s |  27 kB     00:01
déc. 30 14:55:24 manjaro.home dnf[2648]: Fedora Modular 29 - x86_64 - Updates             14 kB/s |  25 kB     00:01
déc. 30 14:55:25 manjaro.home dnf[2648]: Fedora 29 - x86_64 - Updates                     14 kB/s |  23 kB     00:01
déc. 30 14:55:27 manjaro.home dnf[2648]: Fedora 29 - x86_64                               19 kB/s |  28 kB     00:01
déc. 30 14:55:29 manjaro.home dnf[2648]: RPM Fusion for Fedora 29 - Free tainted         7.4 kB/s | 9.1 kB     00:01
déc. 30 14:55:31 manjaro.home dnf[2648]: RPM Fusion for Fedora 29 - Free - Updates       7.0 kB/s | 8.8 kB     00:01
déc. 30 14:55:32 manjaro.home dnf[2648]: RPM Fusion for Fedora 29 - Free                 8.0 kB/s | 9.8 kB     00:01
déc. 30 14:55:34 manjaro.home dnf[2648]: Cache des métadonnées créé.
déc. 30 14:55:34 manjaro.home audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dnf-makecache comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
déc. 30 14:55:34 manjaro.home audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dnf-makecache comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
déc. 30 14:55:34 manjaro.home systemd[1]: Started dnf makecache.
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#4 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#4 Sense Key : Illegal Request [current] 
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#4 Add. Sense: Logical block address out of range
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#4 CDB: Read(10) 28 00 3f fc ff fe 00 00 02 00
déc. 30 14:56:18 manjaro.home kernel: print_req_error: I/O error, dev sr0, sector 4294180856
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#5 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#5 Sense Key : Illegal Request [current] 
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#5 Add. Sense: Logical block address out of range
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#5 CDB: Read(10) 28 00 3f fc ff fe 00 00 01 00
déc. 30 14:56:18 manjaro.home kernel: print_req_error: I/O error, dev sr0, sector 4294180856
déc. 30 14:56:18 manjaro.home kernel: Buffer I/O error on dev sr0, logical block 1073545214, async page read
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#7 Sense Key : Illegal Request [current] 
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#7 Add. Sense: Logical block address out of range
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#7 CDB: Read(10) 28 00 3f fc ff ff 00 00 01 00
déc. 30 14:56:18 manjaro.home kernel: print_req_error: I/O error, dev sr0, sector 4294180860
déc. 30 14:56:18 manjaro.home kernel: Buffer I/O error on dev sr0, logical block 1073545215, async page read
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#8 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#8 Sense Key : Illegal Request [current] 
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#8 Add. Sense: Logical block address out of range
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#8 CDB: Read(10) 28 00 00 00 00 00 00 00 02 00
déc. 30 14:56:18 manjaro.home kernel: print_req_error: I/O error, dev sr0, sector 0
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#9 Sense Key : Illegal Request [current] 
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#9 Add. Sense: Logical block address out of range
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#9 CDB: Read(10) 28 00 00 00 00 00 00 00 01 00
déc. 30 14:56:18 manjaro.home kernel: print_req_error: I/O error, dev sr0, sector 0
déc. 30 14:56:18 manjaro.home kernel: Buffer I/O error on dev sr0, logical block 0, async page read
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#11 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#11 Sense Key : Illegal Request [current] 
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#11 Add. Sense: Logical block address out of range
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#11 CDB: Read(10) 28 00 00 00 00 01 00 00 01 00
déc. 30 14:56:18 manjaro.home kernel: print_req_error: I/O error, dev sr0, sector 4
déc. 30 14:56:18 manjaro.home kernel: Buffer I/O error on dev sr0, logical block 1, async page read
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#12 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#12 Sense Key : Illegal Request [current] 
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#12 Add. Sense: Logical block address out of range
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#12 CDB: Read(10) 28 00 00 00 00 00 00 00 01 00
déc. 30 14:56:18 manjaro.home kernel: print_req_error: I/O error, dev sr0, sector 0
déc. 30 14:56:18 manjaro.home kernel: Buffer I/O error on dev sr0, logical block 0, async page read
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#14 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#14 Sense Key : Illegal Request [current] 
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#14 Add. Sense: Logical block address out of range
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#14 CDB: Read(10) 28 00 00 00 00 01 00 00 01 00
déc. 30 14:56:18 manjaro.home kernel: print_req_error: I/O error, dev sr0, sector 4
déc. 30 14:56:18 manjaro.home kernel: Buffer I/O error on dev sr0, logical block 1, async page read
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#15 Sense Key : Illegal Request [current] 
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#15 Add. Sense: Logical block address out of range
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#15 CDB: Read(10) 28 00 00 00 00 00 00 00 01 00
déc. 30 14:56:18 manjaro.home kernel: print_req_error: I/O error, dev sr0, sector 0
déc. 30 14:56:18 manjaro.home kernel: Buffer I/O error on dev sr0, logical block 0, async page read
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#17 Sense Key : Illegal Request [current] 
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#17 Add. Sense: Logical block address out of range
déc. 30 14:56:18 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#17 CDB: Read(10) 28 00 00 00 00 01 00 00 01 00
déc. 30 14:56:18 manjaro.home kernel: print_req_error: I/O error, dev sr0, sector 4
déc. 30 14:56:18 manjaro.home kernel: Buffer I/O error on dev sr0, logical block 1, async page read
déc. 30 14:56:18 manjaro.home kernel: Buffer I/O error on dev sr0, logical block 0, async page read
déc. 30 14:56:18 manjaro.home kernel: Buffer I/O error on dev sr0, logical block 1, async page read
déc. 30 14:56:24 manjaro.home kernel: scsi_io_completion_action: 121 callbacks suppressed
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#9 Sense Key : Illegal Request [current] 
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#9 Add. Sense: Logical block address out of range
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#9 CDB: Read(10) 28 00 00 00 00 01 00 00 01 00
déc. 30 14:56:24 manjaro.home kernel: print_req_error: 121 callbacks suppressed
déc. 30 14:56:24 manjaro.home kernel: print_req_error: I/O error, dev sr0, sector 4
déc. 30 14:56:24 manjaro.home kernel: buffer_io_error: 119 callbacks suppressed
déc. 30 14:56:24 manjaro.home kernel: Buffer I/O error on dev sr0, logical block 1, async page read
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#12 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#12 Sense Key : Illegal Request [current] 
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#12 Add. Sense: Logical block address out of range
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#12 CDB: Read(10) 28 00 00 00 00 00 00 00 01 00
déc. 30 14:56:24 manjaro.home kernel: print_req_error: I/O error, dev sr0, sector 0
déc. 30 14:56:24 manjaro.home kernel: Buffer I/O error on dev sr0, logical block 0, async page read
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#14 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#14 Sense Key : Illegal Request [current] 
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#14 Add. Sense: Logical block address out of range
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#14 CDB: Read(10) 28 00 00 00 00 01 00 00 01 00
déc. 30 14:56:24 manjaro.home kernel: print_req_error: I/O error, dev sr0, sector 4
déc. 30 14:56:24 manjaro.home kernel: Buffer I/O error on dev sr0, logical block 1, async page read
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#15 Sense Key : Illegal Request [current] 
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#15 Add. Sense: Logical block address out of range
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#15 CDB: Read(10) 28 00 00 00 00 02 00 00 01 00
déc. 30 14:56:24 manjaro.home kernel: print_req_error: I/O error, dev sr0, sector 8
déc. 30 14:56:24 manjaro.home kernel: Buffer I/O error on dev sr0, logical block 2, async page read
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#17 Sense Key : Illegal Request [current] 
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#17 Add. Sense: Logical block address out of range
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#17 CDB: Read(10) 28 00 00 00 00 03 00 00 01 00
déc. 30 14:56:24 manjaro.home kernel: print_req_error: I/O error, dev sr0, sector 12
déc. 30 14:56:24 manjaro.home kernel: Buffer I/O error on dev sr0, logical block 3, async page read
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#18 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#18 Sense Key : Illegal Request [current] 
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#18 Add. Sense: Logical block address out of range
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#18 CDB: Read(10) 28 00 00 00 00 04 00 00 01 00
déc. 30 14:56:24 manjaro.home kernel: print_req_error: I/O error, dev sr0, sector 16
déc. 30 14:56:24 manjaro.home kernel: Buffer I/O error on dev sr0, logical block 4, async page read
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#20 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#20 Sense Key : Illegal Request [current] 
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#20 Add. Sense: Logical block address out of range
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#20 CDB: Read(10) 28 00 00 00 00 05 00 00 01 00
déc. 30 14:56:24 manjaro.home kernel: print_req_error: I/O error, dev sr0, sector 20
déc. 30 14:56:24 manjaro.home kernel: Buffer I/O error on dev sr0, logical block 5, async page read
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#21 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#21 Sense Key : Illegal Request [current] 
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#21 Add. Sense: Logical block address out of range
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#21 CDB: Read(10) 28 00 00 00 00 00 00 00 01 00
déc. 30 14:56:24 manjaro.home kernel: print_req_error: I/O error, dev sr0, sector 0
déc. 30 14:56:24 manjaro.home kernel: Buffer I/O error on dev sr0, logical block 0, async page read
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#23 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#23 Sense Key : Illegal Request [current] 
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#23 Add. Sense: Logical block address out of range
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#23 CDB: Read(10) 28 00 00 00 00 01 00 00 01 00
déc. 30 14:56:24 manjaro.home kernel: print_req_error: I/O error, dev sr0, sector 4
déc. 30 14:56:24 manjaro.home kernel: Buffer I/O error on dev sr0, logical block 1, async page read
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#24 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#24 Sense Key : Illegal Request [current] 
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#24 Add. Sense: Logical block address out of range
déc. 30 14:56:24 manjaro.home kernel: sr 1:0:0:0: [sr0] tag#24 CDB: Read(10) 28 00 00 00 00 00 00 00 01 00
déc. 30 14:56:24 manjaro.home kernel: print_req_error: I/O error, dev sr0, sector 0
déc. 30 14:56:24 manjaro.home kernel: Buffer I/O error on dev sr0, logical block 0, async page read

Hors ligne

#11 30/12/2018 16:26:06

enerbreiz
Membre
Lieu : Région de Saint-Malo
Inscription : 03/08/2010
Messages : 70

Re : [Résolu] lecture DVD sur ASUS N61VG

Bonjour,
j'ai refait une réinstallation des codecs multimédia et certains n'avaient apparemment pas été installés .
une relance avec vlc s'est avérée concluante smile
Merci pour ton aide
Problème résolu.
clt

Hors ligne

#12 30/12/2018 16:56:42

Nicosss
Membre
Lieu : Isère
Inscription : 05/03/2007
Messages : 4 524
Site Web

Re : [Résolu] lecture DVD sur ASUS N61VG

Bon tant mieux alors.

Sinon il aurait fallu regarder s'il était bien monté pour commencer, à défaut de lire le contenu.

Bonne continuation !


F29_64 Gnome-Shell - GA-990FXA-UD3 - Phenom II X6 1100T - NH-D14 - Ati HD 5750 Fanless - 16Go RAM /&/ F29_64 Gnome-Shell - Toshiba Satellite C660D-19X - 8Go RAM
F29_64 - ASRock 960GC-GS FX - AMD FX(tm)-8300 - 16Go RAM

Hors ligne

#13 30/12/2018 17:39:35

enerbreiz
Membre
Lieu : Région de Saint-Malo
Inscription : 03/08/2010
Messages : 70

Re : [Résolu] lecture DVD sur ASUS N61VG

en fait la lecture n'est possible qu'en ligne de cde avec la cde

journalclt -f

???
merci votre commentaire
clt

Hors ligne

#14 30/12/2018 18:59:25

Nicosss
Membre
Lieu : Isère
Inscription : 05/03/2007
Messages : 4 524
Site Web

Re : [Résolu] lecture DVD sur ASUS N61VG

Non du tout, ce sont les logs système. C'était pour voir ce qu'il se passait comme le lecteur DVD était bien reconnu.

Pourquoi ça ne fonctionne plus ?


F29_64 Gnome-Shell - GA-990FXA-UD3 - Phenom II X6 1100T - NH-D14 - Ati HD 5750 Fanless - 16Go RAM /&/ F29_64 Gnome-Shell - Toshiba Satellite C660D-19X - 8Go RAM
F29_64 - ASRock 960GC-GS FX - AMD FX(tm)-8300 - 16Go RAM

Hors ligne

#15 30/12/2018 19:38:31

Refuznik
Membre
Inscription : 31/01/2007
Messages : 7 246

Re : [Résolu] lecture DVD sur ASUS N61VG

Mouais tu peux lancer vlc en ligne de commande et voir les messages d'erreurs ?

Hors ligne

#16 30/12/2018 22:18:59

nouvo09
Accro à Fedo !
Lieu : Paris
Inscription : 22/09/2005
Messages : 21 484

Re : [Résolu] lecture DVD sur ASUS N61VG

En même temps vlc est livré avec toute sa collection de codecs.


C'est pas parce que c'est difficile qu'on n'ose pas,
c'est parce qu'on ose pas que c'est difficile !

Hors ligne

Pied de page des forums