Fedora-Fr - Communauté francophone Fedora - Linux

Communauté francophone des utilisateurs de la distribution Linux Fedora.

  

Dernière news : Arrêt de maintenance pour Fedora 28

#26 13/12/2018 22:39:35

thierryR
Membre
Lieu : Chalons en Champagne
Inscription : 31/01/2011
Messages : 627
Site Web

Re : [Résolu] [ Résolu ]installation d'une imprimante ,scanner Epson

Ton imprimante étant sur l'adesse  192.168.1.31 ton scanner doit être recherché précisément sur cette adresse et pas ailleurs.
sane-find-scanner ne trouve rien en réseau.
scanimage -L doit te donner ton scanner
ping 192.168.1.31 -w 10 doit répondre positivement.


Chalons en Champagne: Au nord, un peu avant la banquise
Kernel: 5.0.13-300.fc30.x86_64 x86_64 bits: 64 Desktop: KDE Plasma 5.15.4 Distro: Fedora release 30
Type: Desktop Mobo: ASRock model: X470 Gaming-ITX/ac serial: <root required> UEFI: CPU: Topology: 8-Core model: AMD Ryzen 7 2700X bits: 64 type: MT MCP L2 cache: 4096 KiB

Hors ligne

#27 13/12/2018 22:58:09

jenrem
Membre
Lieu : cote atlantique sud Ouest
Inscription : 07/12/2018
Messages : 147

Re : [Résolu] [ Résolu ]installation d'une imprimante ,scanner Epson

Bonsoir ThierryR

Je te mets les réponses aux commandes que tu m'as données
C'est un peu long , mais je pense que tu sais qu'elles sont les bonnes lignes

[jenrem@linux ~]$ sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not open USB device 0x050d/0x705a at 002:004: Access denied (insufficient permissions)
could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
found USB scanner (vendor=0x04b8, product=0x085f) at libusb:002:003
could not open USB device 0x8087/0x0024 at 002:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 002:001: Access denied (insufficient permissions)
could not open USB device 0x04f2/0xb086 at 001:003: Access denied (insufficient permissions)
could not open USB device 0x8087/0x0024 at 001:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions)
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.

La réponse à  scanimage -L

device `epson2:libusb:002:003' is a Epson PID 085F flatbed scanner
[jenrem@linux ~]$ 

La réponse à ping

[jenrem@linux ~]$ ping 192.168.1.31-w10
ping: 192.168.1.31-w10: Name or service not known
[jenrem@linux ~]$ sudo ping 192.168.1.31 -w10
[sudo] Mot de passe de jenrem : 
PING 192.168.1.31 (192.168.1.31) 56(84) bytes of data.
64 bytes from 192.168.1.31: icmp_seq=1 ttl=64 time=2115 ms
64 bytes from 192.168.1.31: icmp_seq=2 ttl=64 time=1097 ms
64 bytes from 192.168.1.31: icmp_seq=3 ttl=64 time=72.8 ms
64 bytes from 192.168.1.31: icmp_seq=4 ttl=64 time=15.7 ms
64 bytes from 192.168.1.31: icmp_seq=5 ttl=64 time=15.2 ms
64 bytes from 192.168.1.31: icmp_seq=6 ttl=64 time=15.2 ms
64 bytes from 192.168.1.31: icmp_seq=7 ttl=64 time=14.9 ms
64 bytes from 192.168.1.31: icmp_seq=8 ttl=64 time=15.6 ms
64 bytes from 192.168.1.31: icmp_seq=9 ttl=64 time=16.1 ms
64 bytes from 192.168.1.31: icmp_seq=10 ttl=64 time=15.10 ms

--- 192.168.1.31 ping statistics ---
10 packets transmitted, 10 received, 0% packet loss, time 63ms
rtt min/avg/max/mdev = 14.856/339.298/2114.871/673.119 ms, pipe 3

je te confirme , le scanner fonctionne correctement
Merci
Bonne soirée


Fedora 29 KDE

Hors ligne

Pied de page des forums