[Résolu] Plus de wifi depuis le noyau 4.17.2-200.fc28

pierrotlalune · 3 juil. 2018

Bonjour à tous:-),
je n'ai plus de wifi sur mon portable Dell Vostro 1510:-(.
Voici mes trois noyaux:

$ dnf list kernel
Dernière vérification de l’expiration des métadonnées effectuée il y a 0:19:03 le mar. 03 juil. 2018 16:35:59 CEST.
Paquets installés
kernel.x86_64                  4.16.14-300.fc28                   @updates      
kernel.x86_64                  4.17.2-200.fc28                    @updates      
kernel.x86_64                  4.17.3-200.fc28                    @updates      
Paquets disponibles
kernel.src                     4.17.3-200.fc28                    updates-source
$

Le wifi ne fonctionne que sur le 4.16.14-300.fc28.
Pourtant, je pense avoir ce qu'il faut:

$ dnf list akmods akmod-wl kmod-wl NetworkManager-wifi
Dernière vérification de l’expiration des métadonnées effectuée il y a 0:26:31 le mar. 03 juil. 2018 16:35:59 CEST.
Paquets installés
NetworkManager-wifi.x86_64        1:1.10.10-1.fc28            @updates          
akmod-wl.x86_64                   6.30.223.271-18.fc28        @rpmfusion-nonfree
akmods.noarch                     0.5.6-15.fc28               @fedora           
kmod-wl.x86_64                    6.30.223.271-18.fc28        @rpmfusion-nonfree
Paquets disponibles
akmods.src                        0.5.6-15.fc28               fedora-source     
$

Tous les paquets installés ci-dessus ont été réinstallés.
J'ai tenté ceci:

# akmods --force
Checking kmods exist for 4.17.3-200.fc28.x86_64            [  OK  ]
#

Mais sans résultat:roll:.
Même en supprimant kmod-wl-4.17.3-200.fc28.x86_64.x86_64 correspondant au dernier noyau que j'utilise puis en le recréant en redémarrant ou avec akmods --force, je n'obtiens pas de résultat.
Je ne vois plus quoi faire. Merci pour votre aide.
Amicalement.
pll

BBeta-Pictoris · 3 juil. 2018

Que donne les commandes suivantes ?

lspci
lsusb
nmcli device

pierrotlalune · 3 juil. 2018

Beta-Pictoris wrote:Que donne les commandes suivantes ?
lspci
lsusb
nmcli device

Voici:

$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: NVIDIA Corporation G86M [GeForce 8400M GS] (rev a1)
06:00.0 Network controller: Broadcom Limited BCM4312 802.11b/g LP-PHY (rev 01)
07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02)
08:05.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02)
08:05.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 02)
08:05.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01)
$ lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 003: ID 046d:c045 Logitech, Inc. Optical Mouse
Bus 006 Device 002: ID 04b4:0102 Cypress Semiconductor Corp. Keyboard with APM
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0c45:63e0 Microdia Sonix Integrated Webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 413c:8140 Dell Computer Corp. Wireless 360 Bluetooth
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
$ nmcli device
DEVICE  TYPE      STATE     CONNECTION 
enp7s0  ethernet  connecté  enp7s0     
lo      loopback  non-géré  --         
$

BBeta-Pictoris · 3 juil. 2018

Même avec le noyau 4.16, tu as besoin du dépôt rpmfusion pour faire fonctionner le wifi ?

Que donne ?

rpm -ql akmod-wl.x86_64

pierrotlalune · 3 juil. 2018

Beta-Pictoris wrote:Même avec le noyau 4.16, tu as besoin du dépôt rpmfusion pour faire fonctionner le wifi ?

Que donne ?
rpm -ql akmod-wl.x86_64

$ rpm -ql akmod-wl.x86_64
/usr/src/akmods/wl-kmod-6.30.223.271-18.fc28.src.rpm
/usr/src/akmods/wl-kmod.latest
$

Il m'a toujours fallu akmod-wl pour avoir le wifi.

BBeta-Pictoris · 3 juil. 2018

Redémarre sur le denier noyau et essaye de recompiler le paquet wl-kmod source.

rpmbuild --rebuild /usr/src/akmods/wl-kmod-6.30.223.271-18.fc28.src.rpm

Où bien:

akmodsbuild -v  /usr/src/akmods/wl-kmod-6.30.223.271-18.fc28.src.rpm

Ça te permettra de voir d’éventuels messages d'erreurs.
Si des paquets sont manquants, installe les et relance la compilation.

Connais-tu le nom du module wifi utilisé par ta machine avec le noyau 4.16 ?

lsmod

pierrotlalune · 3 juil. 2018

Bonsoir Beta-Pictoris:-),
j'ai lancé la compilation:

# rpmbuild --rebuild /usr/src/akmods/wl-kmod-6.30.223.271-18.fc28.src.rpm
Installation de /usr/src/akmods/wl-kmod-6.30.223.271-18.fc28.src.rpm
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
erreur : Dépendances de construction manquantes:
	buildsys-build-rpmfusion-kerneldevpkgs-akmod-x86_64 est nécessaire pour wl-kmod-6.30.223.271-18.fc28.x86_64
#

Je corrige l'erreur de dépendances, puis j'obtiens ceci:

# rpmbuild --rebuild /usr/src/akmods/wl-kmod-6.30.223.271-18.fc28.src.rpm
Installation de /usr/src/akmods/wl-kmod-6.30.223.271-18.fc28.src.rpm
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
Exécution_de(%prep) : /bin/sh -e /var/tmp/rpm-tmp.xPXxQD
+ umask 022
+ cd /root/rpmbuild/BUILD
+ kmodtool --target x86_64 --repo rpmfusion --kmodname wl-kmod --filterfile /root/rpmbuild/SOURCES/wl-kmod-kmodtool-excludekernel-filterfile --akmod


%global akmod_install mkdir -p $RPM_BUILD_ROOT/%{_usrsrc}/akmods/; \rpmbuild --define "_sourcedir %{_sourcedir}" \--define "_srcrpmdir $RPM_BUILD_ROOT/%{_usrsrc}/akmods/" \-bs --nodeps %{_specdir}/%{name}.spec ; \ln -s $(ls $RPM_BUILD_ROOT/%{_usrsrc}/akmods/) $RPM_BUILD_ROOT/%{_usrsrc}/akmods/wl-kmod.latest

%package       -n akmod-wl
Summary:          Akmod package for wl kernel module(s)
Requires:         kmodtool
Requires:         akmods
%{?AkmodsBuildRequires:Requires: %{AkmodsBuildRequires}}
# same requires and provides as a kmods package would have
Requires:         wl-kmod-common >= %{?epoch:%{epoch}:}%{version}
Provides:         wl-kmod = %{?epoch:%{epoch}:}%{version}-%{release}

%description   -n akmod-wl
This package provides the akmod package for the wl kernel modules.

%posttrans     -n akmod-wl
nohup /usr/sbin/akmods --from-akmod-posttrans --akmod wl &> /dev/null &

%files         -n akmod-wl
%defattr(-,root,root,-)
%{_usrsrc}/akmods/*

%package       -n kmod-wl
Summary:          Metapackage which tracks in wl kernel module for newest kernel

Provides:         wl-kmod = %{?epoch:%{epoch}:}%{version}-%{release}
Provides:         kmod-wl-xen = %{?epoch:%{epoch}:}%{version}-%{release}
Provides:         kmod-wl-smp = %{?epoch:%{epoch}:}%{version}-%{release}
Provides:         kmod-wl-PAE = %{?epoch:%{epoch}:}%{version}-%{release}
Requires:         akmod-wl = %{?epoch:%{epoch}:}%{version}-%{release}

%description   -n kmod-wl
This is a meta-package without payload which sole purpose is to require the
wl kernel module(s) for the newest kernel,
to make sure you get it together with a new kernel.

%files         -n kmod-wl
%defattr(644,root,root,755)
+ cd /root/rpmbuild/BUILD
+ rm -rf wl-kmod-6.30.223.271
+ /usr/bin/mkdir -p wl-kmod-6.30.223.271
+ cd wl-kmod-6.30.223.271
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ mkdir wl-kmod-6.30.223.271-src
+ pushd wl-kmod-6.30.223.271-src
~/rpmbuild/BUILD/wl-kmod-6.30.223.271/wl-kmod-6.30.223.271-src ~/rpmbuild/BUILD/wl-kmod-6.30.223.271
+ tar xzf /root/rpmbuild/SOURCES/hybrid-v35_64-nodebug-pcoem-6_30_223_271.tar.gz
+ echo 'Patch #0 (wl-kmod-001_wext_workaround.patch):'
Patch #0 (wl-kmod-001_wext_workaround.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .wext_workaround.patch --fuzz=0
patching file Makefile
+ echo 'Patch #1 (wl-kmod-002_kernel_3.18_null_pointer.patch):'
Patch #1 (wl-kmod-002_kernel_3.18_null_pointer.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .kernel_3.18_null_pointer.patch --fuzz=0
patching file src/wl/sys/wl_linux.c
+ echo 'Patch #2 (wl-kmod-003_gcc_4.9_remove_TIME_DATE_macros.patch):'
Patch #2 (wl-kmod-003_gcc_4.9_remove_TIME_DATE_macros.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .gcc_4.9_remove_TIME_DATE_macros --fuzz=0
patching file src/wl/sys/wl_linux.c
+ echo 'Patch #3 (wl-kmod-004_kernel_4.3_rdtscl_to_rdtsc.patch):'
Patch #3 (wl-kmod-004_kernel_4.3_rdtscl_to_rdtsc.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .kernel_4.3_rdtscl_to_rdtsc.patch --fuzz=0
patching file src/shared/linux_osl.c
+ echo 'Patch #4 (wl-kmod-005_kernel_4.7_IEEE80211_BAND_to_NL80211_BAND.patch):'
Patch #4 (wl-kmod-005_kernel_4.7_IEEE80211_BAND_to_NL80211_BAND.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .kernel_4.7_IEEE80211_BAND_to_NL80211_BAND --fuzz=0
patching file src/wl/sys/wl_cfg80211_hybrid.c
+ echo 'Patch #5 (wl-kmod-006_gcc_6_fix_indentation_warnings.patch):'
Patch #5 (wl-kmod-006_gcc_6_fix_indentation_warnings.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .gcc_6_fix_indentation_warnings --fuzz=0
patching file src/wl/sys/wl_linux.c
+ echo 'Patch #6 (wl-kmod-007_kernel_4.8_add_cfg80211_scan_info_struct.patch):'
Patch #6 (wl-kmod-007_kernel_4.8_add_cfg80211_scan_info_struct.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .kernel_4.8_add_cfg80211_scan_info_struct --fuzz=0
patching file src/wl/sys/wl_cfg80211_hybrid.c
+ echo 'Patch #7 (wl-kmod-008_fix_kernel_warnings.patch):'
Patch #7 (wl-kmod-008_fix_kernel_warnings.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .fix_kernel_warnings --fuzz=0
patching file src/wl/sys/wl_cfg80211_hybrid.c
+ echo 'Patch #8 (wl-kmod-009_kernel_4.11_remove_last_rx_in_net_device_struct.patch):'
Patch #8 (wl-kmod-009_kernel_4.11_remove_last_rx_in_net_device_struct.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .kernel_4.11_remove_last_rx_in_net_device_struct --fuzz=0
patching file src/wl/sys/wl_cfg80211_hybrid.c
patching file src/wl/sys/wl_linux.c
+ echo 'Patch #9 (wl-kmod-010_kernel_4.12_add_cfg80211_roam_info_struct.patch):'
Patch #9 (wl-kmod-010_kernel_4.12_add_cfg80211_roam_info_struct.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .kernel_4.12_add_cfg80211_roam_info_struct --fuzz=0
patching file src/wl/sys/wl_cfg80211_hybrid.c
+ echo 'Patch #10 (wl-kmod-011_kernel_4.14_new_kernel_read_function_prototype.patch):'
Patch #10 (wl-kmod-011_kernel_4.14_new_kernel_read_function_prototype.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .kernel_4.14_new_kernel_read_function_prototype --fuzz=0
patching file src/shared/linux_osl.c
+ echo 'Patch #11 (wl-kmod-012_kernel_4.15_new_timer.patch):'
Patch #11 (wl-kmod-012_kernel_4.15_new_timer.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .kernel_4.15_new_timer --fuzz=0
patching file src/wl/sys/wl_linux.c
+ echo 'Patch #12 (wl-kmod-013_gcc8_fix_bounds_check_warnings.patch):'
Patch #12 (wl-kmod-013_gcc8_fix_bounds_check_warnings.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .gcc8_fix_bounds_check_warnings --fuzz=0
patching file src/wl/sys/wl_linux.c
+ popd
~/rpmbuild/BUILD/wl-kmod-6.30.223.271
+ exit 0
Exécution_de(%build) : /bin/sh -e /var/tmp/rpm-tmp.VtGuI4
+ umask 022
+ cd /root/rpmbuild/BUILD
+ cd wl-kmod-6.30.223.271
+ exit 0
Exécution_de(%install) : /bin/sh -e /var/tmp/rpm-tmp.JpyWAv
+ umask 022
+ cd /root/rpmbuild/BUILD
+ '[' /root/rpmbuild/BUILDROOT/wl-kmod-6.30.223.271-18.fc28.x86_64 '!=' / ']'
+ rm -rf /root/rpmbuild/BUILDROOT/wl-kmod-6.30.223.271-18.fc28.x86_64
++ dirname /root/rpmbuild/BUILDROOT/wl-kmod-6.30.223.271-18.fc28.x86_64
+ mkdir -p /root/rpmbuild/BUILDROOT
+ mkdir /root/rpmbuild/BUILDROOT/wl-kmod-6.30.223.271-18.fc28.x86_64
+ cd wl-kmod-6.30.223.271
+ rm -rf /root/rpmbuild/BUILDROOT/wl-kmod-6.30.223.271-18.fc28.x86_64
+ chmod 0755 '/root/rpmbuild/BUILDROOT/wl-kmod-6.30.223.271-18.fc28.x86_64%{kmodinstdir_prefix}*%{kmodinstdir_postfix}/*'
chmod: cannot access '/root/rpmbuild/BUILDROOT/wl-kmod-6.30.223.271-18.fc28.x86_64%{kmodinstdir_prefix}*%{kmodinstdir_postfix}/*': No such file or directory
+ :
+ mkdir -p /root/rpmbuild/BUILDROOT/wl-kmod-6.30.223.271-18.fc28.x86_64//usr/src/akmods/
+ rpmbuild --define '_sourcedir /root/rpmbuild/SOURCES' --define '_srcrpmdir /root/rpmbuild/BUILDROOT/wl-kmod-6.30.223.271-18.fc28.x86_64//usr/src/akmods/' -bs --nodeps /root/rpmbuild/SPECS/wl-kmod.spec
Wrote: /root/rpmbuild/BUILDROOT/wl-kmod-6.30.223.271-18.fc28.x86_64/usr/src/akmods/wl-kmod-6.30.223.271-18.fc28.src.rpm
++ ls /root/rpmbuild/BUILDROOT/wl-kmod-6.30.223.271-18.fc28.x86_64//usr/src/akmods/
+ ln -s wl-kmod-6.30.223.271-18.fc28.src.rpm /root/rpmbuild/BUILDROOT/wl-kmod-6.30.223.271-18.fc28.x86_64//usr/src/akmods/wl-kmod.latest
+ /usr/lib/rpm/check-buildroot
+ /usr/lib/rpm/redhat/brp-ldconfig
/sbin/ldconfig: Warning: ignoring configuration file that cannot be opened: /etc/ld.so.conf: No such file or directory
+ /usr/lib/rpm/brp-compress
+ /usr/lib/rpm/brp-strip /usr/bin/strip
+ /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump
+ /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip
+ /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1
+ /usr/lib/rpm/brp-python-hardlink
+ /usr/lib/rpm/redhat/brp-mangle-shebangs '' ''
Traitement des fichiers : akmod-wl-6.30.223.271-18.fc28.x86_64
Provides: akmod-wl = 6.30.223.271-18.fc28 akmod-wl(x86-64) = 6.30.223.271-18.fc28 wl-kmod = 6.30.223.271-18.fc28
Requires(interp): /bin/sh
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires(posttrans): /bin/sh
Traitement des fichiers : kmod-wl-6.30.223.271-18.fc28.x86_64
Vérification des fichiers non empaquetés : /usr/lib/rpm/check-files /root/rpmbuild/BUILDROOT/wl-kmod-6.30.223.271-18.fc28.x86_64
Écrit : /root/rpmbuild/RPMS/x86_64/akmod-wl-6.30.223.271-18.fc28.x86_64.rpm
Écrit : /root/rpmbuild/RPMS/x86_64/kmod-wl-6.30.223.271-18.fc28.x86_64.rpm
Exécution_de(%clean) : /bin/sh -e /var/tmp/rpm-tmp.x0f0J6
+ umask 022
+ cd /root/rpmbuild/BUILD
+ cd wl-kmod-6.30.223.271
+ rm -rf /root/rpmbuild/BUILDROOT/wl-kmod-6.30.223.271-18.fc28.x86_64
+ exit 0
Exécution_de(--clean) : /bin/sh -e /var/tmp/rpm-tmp.vZv2TH
+ umask 022
+ cd /root/rpmbuild/BUILD
+ rm -rf wl-kmod-6.30.223.271
+ exit 0
#

puis reboot, mais ça ne marche toujours pas:-(.
Je tente donc:

# akmodsbuild -v  /usr/src/akmods/wl-kmod-6.30.223.271-18.fc28.src.rpm
ERROR: Not to be used as root; start as user or 'akmodsbuild' instead.
# déconnexion
$ akmodsbuild -v  /usr/src/akmods/wl-kmod-6.30.223.271-18.fc28.src.rpm
* Rebuilding /usr/src/akmods/wl-kmod-6.30.223.271-18.fc28.src.rpm for kernel(s) 4.17.3-200.fc28.x86_64: attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
attention : user mockbuild does not exist - using root
attention : group mockbuild does not exist - using root
Installation de /usr/src/akmods/wl-kmod-6.30.223.271-18.fc28.src.rpm
Construction pour plate-formes cibles: x86_64
Construction pour cible x86_64
Exécution_de(%prep) : /bin/sh -e /var/tmp/rpm-tmp.sEjOnv
+ umask 022
+ cd /tmp/akmodsbuild.RRGEeY1K//BUILD
+ kmodtool --target x86_64 --repo rpmfusion --kmodname wl-kmod --filterfile /tmp/akmodsbuild.RRGEeY1K/SOURCES/wl-kmod-kmodtool-excludekernel-filterfile --akmod --for-kernels 4.17.3-200.fc28.x86_64
%global  _prefix_usr      /usr

%if 0%{?rhel}
%package       -n kmod-wl
Summary:          wl kernel module(s) for 4.17.3-200.fc28
Provides:         kernel-modules = 4.17.3-200.fc28.x86_64
Provides:         wl-kmod = %{?epoch:%{epoch}:}%{version}-%{release}
Requires:         wl-kmod-common >= %{?epoch:%{epoch}:}%{version}
Requires(post):   %{?_prefix_usr}/sbin/weak-modules
Requires(post):   %{?_prefix_usr}/sbin/depmod
Requires(postun): %{?_prefix_usr}/sbin/weak-modules
Requires(postun): %{?_prefix_usr}/sbin/depmod
%else
%package       -n kmod-wl-4.17.3-200.fc28.x86_64
Summary:          wl kernel module(s) for 4.17.3-200.fc28.x86_64
Provides:         kernel-modules-for-kernel = 4.17.3-200.fc28.x86_64
Provides:         wl-kmod = %{?epoch:%{epoch}:}%{version}-%{release}
Requires:         wl-kmod-common >= %{?epoch:%{epoch}:}%{version}
Requires(post):   %{?_prefix_usr}/sbin/depmod
Requires(postun): %{?_prefix_usr}/sbin/depmod
%endif

%if 0%{?rhel}
Requires:         kernel >= 4.17.3-200.fc28
Requires:         kernel < 4.17.3-201.fc28
BuildRequires:    kernel-devel = 4.17.3-200.fc28 redhat-rpm-config kernel-abi-whitelists

%post          -n kmod-wl
%{?_prefix_usr}/sbin/depmod -aeF /boot/System.map-4.17.3-200.fc28.x86_64 4.17.3-200.fc28.x86_64 > /dev/null || :

modules=( $(find /usr/lib/modules/4.17.3-200.fc28.x86_64/extra/wl/ | grep -e '\.ko$') )
printf '%s\n' "${modules[@]}" | %{?_prefix_usr}/sbin/weak-modules --add-modules

%preun         -n kmod-wl
rpm -ql kmod-wl-%{version}-%{release}.x86_64 | grep -e '\.ko$' > /var/run/rpm-kmod-wl-modules

%postun        -n kmod-wl
%{?_prefix_usr}/sbin/depmod -aeF /boot/System.map-4.17.3-200.fc28.x86_64 4.17.3-200.fc28.x86_64 &> /dev/null || :

modules=( $(cat /var/run/rpm-kmod-wl-modules) )
rm /var/run/rpm-kmod-wl-modules
printf '%s\n' "${modules[@]}" | %{?_prefix_usr}/sbin/weak-modules --remove-modules
%else
Requires:         kernel-uname-r = 4.17.3-200.fc28.x86_64
BuildRequires:    kernel-devel-uname-r = 4.17.3-200.fc28.x86_64
%post          -n kmod-wl-4.17.3-200.fc28.x86_64
%{?_prefix_usr}/sbin/depmod -aeF /boot/System.map-4.17.3-200.fc28.x86_64 4.17.3-200.fc28.x86_64 > /dev/null || :
%postun        -n kmod-wl-4.17.3-200.fc28.x86_64
%{?_prefix_usr}/sbin/depmod -aeF /boot/System.map-4.17.3-200.fc28.x86_64 4.17.3-200.fc28.x86_64 &> /dev/null || :
%endif

%if 0%{?rhel}
%description   -n kmod-wl
This package provides the wl kernel modules built for the Linux
kernel 4.17.3-200.fc28 for the %{_target_cpu} family of processors.
%files         -n kmod-wl
%defattr(644,root,root,755)
%dir /usr/lib/modules/4.17.3-200.fc28.x86_64/extra
/usr/lib/modules/4.17.3-200.fc28.x86_64/extra/wl/
%else
%description   -n kmod-wl-4.17.3-200.fc28.x86_64
This package provides the wl kernel modules built for the Linux
kernel 4.17.3-200.fc28.x86_64 for the %{_target_cpu} family of processors.
%files         -n kmod-wl-4.17.3-200.fc28.x86_64
%defattr(644,root,root,755)
%dir /usr/lib/modules/4.17.3-200.fc28.x86_64/extra
/usr/lib/modules/4.17.3-200.fc28.x86_64/extra/wl/
%endif

%global kmodinstdir_prefix  /usr/lib/modules/
%global kmodinstdir_postfix /extra/wl/
%global kernel_versions     4.17.3-200.fc28.x86_64___%{_usrsrc}/kernels/4.17.3-200.fc28.x86_64
%global debug_package %{nil}

+ cd /tmp/akmodsbuild.RRGEeY1K/BUILD
+ rm -rf wl-kmod-6.30.223.271
+ /usr/bin/mkdir -p wl-kmod-6.30.223.271
+ cd wl-kmod-6.30.223.271
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ mkdir wl-kmod-6.30.223.271-src
+ pushd wl-kmod-6.30.223.271-src
/tmp/akmodsbuild.RRGEeY1K/BUILD/wl-kmod-6.30.223.271/wl-kmod-6.30.223.271-src /tmp/akmodsbuild.RRGEeY1K/BUILD/wl-kmod-6.30.223.271
+ tar xzf /tmp/akmodsbuild.RRGEeY1K/SOURCES/hybrid-v35_64-nodebug-pcoem-6_30_223_271.tar.gz
+ echo 'Patch #0 (wl-kmod-001_wext_workaround.patch):'
Patch #0 (wl-kmod-001_wext_workaround.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .wext_workaround.patch --fuzz=0
patching file Makefile
+ echo 'Patch #1 (wl-kmod-002_kernel_3.18_null_pointer.patch):'
Patch #1 (wl-kmod-002_kernel_3.18_null_pointer.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .kernel_3.18_null_pointer.patch --fuzz=0
patching file src/wl/sys/wl_linux.c
+ echo 'Patch #2 (wl-kmod-003_gcc_4.9_remove_TIME_DATE_macros.patch):'
Patch #2 (wl-kmod-003_gcc_4.9_remove_TIME_DATE_macros.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .gcc_4.9_remove_TIME_DATE_macros --fuzz=0
patching file src/wl/sys/wl_linux.c
+ echo 'Patch #3 (wl-kmod-004_kernel_4.3_rdtscl_to_rdtsc.patch):'
Patch #3 (wl-kmod-004_kernel_4.3_rdtscl_to_rdtsc.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .kernel_4.3_rdtscl_to_rdtsc.patch --fuzz=0
patching file src/shared/linux_osl.c
+ echo 'Patch #4 (wl-kmod-005_kernel_4.7_IEEE80211_BAND_to_NL80211_BAND.patch):'
Patch #4 (wl-kmod-005_kernel_4.7_IEEE80211_BAND_to_NL80211_BAND.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .kernel_4.7_IEEE80211_BAND_to_NL80211_BAND --fuzz=0
patching file src/wl/sys/wl_cfg80211_hybrid.c
+ echo 'Patch #5 (wl-kmod-006_gcc_6_fix_indentation_warnings.patch):'
Patch #5 (wl-kmod-006_gcc_6_fix_indentation_warnings.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .gcc_6_fix_indentation_warnings --fuzz=0
patching file src/wl/sys/wl_linux.c
+ echo 'Patch #6 (wl-kmod-007_kernel_4.8_add_cfg80211_scan_info_struct.patch):'
Patch #6 (wl-kmod-007_kernel_4.8_add_cfg80211_scan_info_struct.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .kernel_4.8_add_cfg80211_scan_info_struct --fuzz=0
patching file src/wl/sys/wl_cfg80211_hybrid.c
+ echo 'Patch #7 (wl-kmod-008_fix_kernel_warnings.patch):'
Patch #7 (wl-kmod-008_fix_kernel_warnings.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .fix_kernel_warnings --fuzz=0
patching file src/wl/sys/wl_cfg80211_hybrid.c
+ echo 'Patch #8 (wl-kmod-009_kernel_4.11_remove_last_rx_in_net_device_struct.patch):'
Patch #8 (wl-kmod-009_kernel_4.11_remove_last_rx_in_net_device_struct.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .kernel_4.11_remove_last_rx_in_net_device_struct --fuzz=0
patching file src/wl/sys/wl_cfg80211_hybrid.c
patching file src/wl/sys/wl_linux.c
+ echo 'Patch #9 (wl-kmod-010_kernel_4.12_add_cfg80211_roam_info_struct.patch):'
Patch #9 (wl-kmod-010_kernel_4.12_add_cfg80211_roam_info_struct.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .kernel_4.12_add_cfg80211_roam_info_struct --fuzz=0
patching file src/wl/sys/wl_cfg80211_hybrid.c
+ echo 'Patch #10 (wl-kmod-011_kernel_4.14_new_kernel_read_function_prototype.patch):'
Patch #10 (wl-kmod-011_kernel_4.14_new_kernel_read_function_prototype.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .kernel_4.14_new_kernel_read_function_prototype --fuzz=0
patching file src/shared/linux_osl.c
+ echo 'Patch #11 (wl-kmod-012_kernel_4.15_new_timer.patch):'
Patch #11 (wl-kmod-012_kernel_4.15_new_timer.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .kernel_4.15_new_timer --fuzz=0
patching file src/wl/sys/wl_linux.c
+ echo 'Patch #12 (wl-kmod-013_gcc8_fix_bounds_check_warnings.patch):'
Patch #12 (wl-kmod-013_gcc8_fix_bounds_check_warnings.patch):
+ /usr/bin/patch --no-backup-if-mismatch -p1 -b --suffix .gcc8_fix_bounds_check_warnings --fuzz=0
patching file src/wl/sys/wl_linux.c
+ popd
/tmp/akmodsbuild.RRGEeY1K/BUILD/wl-kmod-6.30.223.271
+ for kernel_version in 4.17.3-200.fc28.x86_64___/usr/src/kernels/4.17.3-200.fc28.x86_64
+ cp -a wl-kmod-6.30.223.271-src _kmod_build_4.17.3-200.fc28.x86_64
+ exit 0
Exécution_de(%build) : /bin/sh -e /var/tmp/rpm-tmp.uwVxj7
+ umask 022
+ cd /tmp/akmodsbuild.RRGEeY1K//BUILD
+ cd wl-kmod-6.30.223.271
+ for kernel_version in 4.17.3-200.fc28.x86_64___/usr/src/kernels/4.17.3-200.fc28.x86_64
+ pushd _kmod_build_4.17.3-200.fc28.x86_64
/tmp/akmodsbuild.RRGEeY1K/BUILD/wl-kmod-6.30.223.271/_kmod_build_4.17.3-200.fc28.x86_64 /tmp/akmodsbuild.RRGEeY1K/BUILD/wl-kmod-6.30.223.271
++ pwd
+ make -C /usr/src/kernels/4.17.3-200.fc28.x86_64 M=/tmp/akmodsbuild.RRGEeY1K/BUILD/wl-kmod-6.30.223.271/_kmod_build_4.17.3-200.fc28.x86_64 modules
make: Entering directory '/usr/src/kernels/4.17.3-200.fc28.x86_64'
CFG80211 API is prefered for this kernel version
Using CFG80211 API
  CC [M]  /tmp/akmodsbuild.RRGEeY1K/BUILD/wl-kmod-6.30.223.271/_kmod_build_4.17.3-200.fc28.x86_64/src/shared/linux_osl.o
  CC [M]  /tmp/akmodsbuild.RRGEeY1K/BUILD/wl-kmod-6.30.223.271/_kmod_build_4.17.3-200.fc28.x86_64/src/wl/sys/wl_linux.o
  CC [M]  /tmp/akmodsbuild.RRGEeY1K/BUILD/wl-kmod-6.30.223.271/_kmod_build_4.17.3-200.fc28.x86_64/src/wl/sys/wl_iw.o
  CC [M]  /tmp/akmodsbuild.RRGEeY1K/BUILD/wl-kmod-6.30.223.271/_kmod_build_4.17.3-200.fc28.x86_64/src/wl/sys/wl_cfg80211_hybrid.o
  LD [M]  /tmp/akmodsbuild.RRGEeY1K/BUILD/wl-kmod-6.30.223.271/_kmod_build_4.17.3-200.fc28.x86_64/wl.o
  Building modules, stage 2.
CFG80211 API is prefered for this kernel version
Using CFG80211 API
  MODPOST 1 modules
  CC      /tmp/akmodsbuild.RRGEeY1K/BUILD/wl-kmod-6.30.223.271/_kmod_build_4.17.3-200.fc28.x86_64/wl.mod.o
  LD [M]  /tmp/akmodsbuild.RRGEeY1K/BUILD/wl-kmod-6.30.223.271/_kmod_build_4.17.3-200.fc28.x86_64/wl.ko
make: Leaving directory '/usr/src/kernels/4.17.3-200.fc28.x86_64'
+ popd
/tmp/akmodsbuild.RRGEeY1K/BUILD/wl-kmod-6.30.223.271
+ exit 0
Exécution_de(%install) : /bin/sh -e /var/tmp/rpm-tmp.8mUNor
+ umask 022
+ cd /tmp/akmodsbuild.RRGEeY1K//BUILD
+ '[' /tmp/akmodsbuild.RRGEeY1K/BUILDROOT/wl-kmod-6.30.223.271-18.fc28.x86_64 '!=' / ']'
+ rm -rf /tmp/akmodsbuild.RRGEeY1K/BUILDROOT/wl-kmod-6.30.223.271-18.fc28.x86_64
++ dirname /tmp/akmodsbuild.RRGEeY1K/BUILDROOT/wl-kmod-6.30.223.271-18.fc28.x86_64
+ mkdir -p /tmp/akmodsbuild.RRGEeY1K/BUILDROOT
+ mkdir /tmp/akmodsbuild.RRGEeY1K/BUILDROOT/wl-kmod-6.30.223.271-18.fc28.x86_64
+ cd wl-kmod-6.30.223.271
+ rm -rf /tmp/akmodsbuild.RRGEeY1K/BUILDROOT/wl-kmod-6.30.223.271-18.fc28.x86_64
+ for kernel_version in 4.17.3-200.fc28.x86_64___/usr/src/kernels/4.17.3-200.fc28.x86_64
+ pushd _kmod_build_4.17.3-200.fc28.x86_64
/tmp/akmodsbuild.RRGEeY1K/BUILD/wl-kmod-6.30.223.271/_kmod_build_4.17.3-200.fc28.x86_64 /tmp/akmodsbuild.RRGEeY1K/BUILD/wl-kmod-6.30.223.271
+ mkdir -p /tmp/akmodsbuild.RRGEeY1K/BUILDROOT/wl-kmod-6.30.223.271-18.fc28.x86_64/usr/lib/modules/4.17.3-200.fc28.x86_64/extra/wl/
+ install -m 0755 wl.ko /tmp/akmodsbuild.RRGEeY1K/BUILDROOT/wl-kmod-6.30.223.271-18.fc28.x86_64/usr/lib/modules/4.17.3-200.fc28.x86_64/extra/wl/
+ popd
/tmp/akmodsbuild.RRGEeY1K/BUILD/wl-kmod-6.30.223.271
+ chmod 0755 /tmp/akmodsbuild.RRGEeY1K/BUILDROOT/wl-kmod-6.30.223.271-18.fc28.x86_64/usr/lib/modules/4.17.3-200.fc28.x86_64/extra/wl/wl.ko
+ /usr/lib/rpm/check-buildroot
+ /usr/lib/rpm/redhat/brp-ldconfig
/sbin/ldconfig: Warning: ignoring configuration file that cannot be opened: /etc/ld.so.conf: No such file or directory
+ /usr/lib/rpm/brp-compress
+ /usr/lib/rpm/brp-strip /usr/bin/strip
+ /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump
+ /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip
+ /usr/lib/rpm/brp-python-bytecompile /usr/bin/python 1
+ /usr/lib/rpm/brp-python-hardlink
+ /usr/lib/rpm/redhat/brp-mangle-shebangs '' ''
Traitement des fichiers : kmod-wl-4.17.3-200.fc28.x86_64-6.30.223.271-18.fc28.x86_64
Provides: kernel-modules-for-kernel = 4.17.3-200.fc28.x86_64 kmod-wl-4.17.3-200.fc28.x86_64 = 6.30.223.271-18.fc28 kmod-wl-4.17.3-200.fc28.x86_64(x86-64) = 6.30.223.271-18.fc28 wl-kmod = 6.30.223.271-18.fc28
Requires(interp): /bin/sh /bin/sh
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires(post): /bin/sh /usr/sbin/depmod
Requires(postun): /bin/sh /usr/sbin/depmod
Vérification des fichiers non empaquetés : /usr/lib/rpm/check-files /tmp/akmodsbuild.RRGEeY1K/BUILDROOT/wl-kmod-6.30.223.271-18.fc28.x86_64
Écrit : /tmp/akmodsbuild.RRGEeY1K/RPMS/x86_64/kmod-wl-4.17.3-200.fc28.x86_64-6.30.223.271-18.fc28.x86_64.rpm
Exécution_de(%clean) : /bin/sh -e /var/tmp/rpm-tmp.mWCLxQ
+ umask 022
+ cd /tmp/akmodsbuild.RRGEeY1K//BUILD
+ cd wl-kmod-6.30.223.271
+ rm -rf /tmp/akmodsbuild.RRGEeY1K/BUILDROOT/wl-kmod-6.30.223.271-18.fc28.x86_64
+ exit 0
Exécution_de(--clean) : /bin/sh -e /var/tmp/rpm-tmp.eC5VHf
+ umask 022
+ cd /tmp/akmodsbuild.RRGEeY1K//BUILD
+ rm -rf wl-kmod-6.30.223.271
+ exit 0
Successfull; Saved kmod-wl-4.17.3-200.fc28.x86_64-6.30.223.271-18.fc28.x86_64.rpm in /home/xxx/
$

Mais je ne peux pas installer le kmod-wl en root car j'en suis propriétaire !
Dois je faire un:

chown root:root kmod-wl-4.17.3-200.fc28.x86_64-6.30.223.271-18.fc28.x86_64.rpm

?
Enfin voici le résultat de lsmod:

$ lsmod
Module                  Size  Used by
rfcomm                 86016  4
ip6t_rpfilter          16384  1
ip6t_REJECT            16384  2
nf_reject_ipv6         16384  1 ip6t_REJECT
xt_conntrack           16384  8
ip_set                 45056  0
nfnetlink              16384  1 ip_set
ebtable_nat            16384  1
ebtable_broute         16384  1
bridge                188416  1 ebtable_broute
stp                    16384  1 bridge
llc                    16384  2 bridge,stp
ip6table_nat           16384  1
nf_conntrack_ipv6      16384  5
nf_defrag_ipv6         20480  1 nf_conntrack_ipv6
nf_nat_ipv6            16384  1 ip6table_nat
ip6table_mangle        16384  1
ip6table_raw           16384  1
ip6table_security      16384  1
iptable_nat            16384  1
nf_conntrack_ipv4      16384  5
nf_defrag_ipv4         16384  1 nf_conntrack_ipv4
nf_nat_ipv4            16384  1 iptable_nat
nf_nat                 36864  2 nf_nat_ipv6,nf_nat_ipv4
nf_conntrack          147456  6 xt_conntrack,nf_conntrack_ipv6,nf_conntrack_ipv4,nf_nat,nf_nat_ipv6,nf_nat_ipv4
libcrc32c              16384  2 nf_conntrack,nf_nat
iptable_mangle         16384  1
iptable_raw            16384  1
iptable_security       16384  1
ebtable_filter         16384  1
ebtables               36864  3 ebtable_nat,ebtable_filter,ebtable_broute
ip6table_filter        16384  1
ip6_tables             28672  5 ip6table_filter,ip6table_raw,ip6table_nat,ip6table_mangle,ip6table_security
bnep                   24576  2
binfmt_misc            20480  1
sunrpc                434176  1
wl                   6463488  0
iTCO_wdt               16384  0
gpio_ich               16384  0
iTCO_vendor_support    16384  1 iTCO_wdt
btusb                  53248  0
btrtl                  16384  1 btusb
btbcm                  16384  1 btusb
dell_laptop            24576  0
btintel                24576  1 btusb
uvcvideo              114688  0
videobuf2_vmalloc      16384  1 uvcvideo
bluetooth             598016  27 btrtl,btintel,btbcm,bnep,btusb,rfcomm
videobuf2_memops       16384  1 videobuf2_vmalloc
dell_smm_hwmon         16384  0
videobuf2_v4l2         28672  1 uvcvideo
videobuf2_common       53248  2 videobuf2_v4l2,uvcvideo
cfg80211              770048  1 wl
videodev              208896  3 videobuf2_v4l2,uvcvideo,videobuf2_common
media                  45056  2 videodev,uvcvideo
dell_wmi               16384  0
ecdh_generic           24576  1 bluetooth
coretemp               16384  0
sparse_keymap          16384  1 dell_wmi
snd_hda_codec_realtek   110592  1
snd_hda_codec_generic    86016  1 snd_hda_codec_realtek
rfkill                 28672  5 bluetooth,dell_laptop,cfg80211
joydev                 24576  0
dell_smbios            28672  2 dell_wmi,dell_laptop
dcdbas                 16384  1 dell_smbios
dell_wmi_descriptor    16384  2 dell_wmi,dell_smbios
snd_hda_intel          45056  4
wmi_bmof               16384  0
snd_hda_codec         151552  3 snd_hda_codec_generic,snd_hda_intel,snd_hda_codec_realtek
snd_hda_core           94208  4 snd_hda_codec_generic,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek
snd_hwdep              16384  1 snd_hda_codec
i2c_i801               28672  0
lpc_ich                28672  0
snd_seq                81920  0
snd_seq_device         16384  1 snd_seq
snd_pcm               118784  3 snd_hda_intel,snd_hda_codec,snd_hda_core
shpchp                 40960  0
snd_timer              36864  2 snd_seq,snd_pcm
snd                    94208  17 snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm
soundcore              16384  1 snd
acpi_cpufreq           24576  1
dm_crypt               40960  1
nouveau              2023424  22
mxm_wmi                16384  1 nouveau
i2c_algo_bit           16384  1 nouveau
sdhci_pci              40960  0
drm_kms_helper        196608  1 nouveau
cqhci                  28672  1 sdhci_pci
sdhci                  57344  1 sdhci_pci
ttm                   126976  1 nouveau
serio_raw              16384  0
mmc_core              172032  3 sdhci,cqhci,sdhci_pci
drm                   458752  8 drm_kms_helper,ttm,nouveau
firewire_ohci          45056  0
firewire_core          81920  1 firewire_ohci
ata_generic            16384  0
pata_acpi              16384  0
r8169                  94208  0
crc_itu_t              16384  1 firewire_core
mii                    16384  1 r8169
wmi                    32768  6 dell_wmi,wmi_bmof,dell_smbios,dell_wmi_descriptor,mxm_wmi,nouveau
video                  45056  3 dell_wmi,dell_laptop,nouveau
[alexandre@alexdell ~]$ lsmod
Module                  Size  Used by
rfcomm                 86016  4
ip6t_rpfilter          16384  1
ip6t_REJECT            16384  2
nf_reject_ipv6         16384  1 ip6t_REJECT
xt_conntrack           16384  8
ip_set                 45056  0
nfnetlink              16384  1 ip_set
ebtable_nat            16384  1
ebtable_broute         16384  1
bridge                188416  1 ebtable_broute
stp                    16384  1 bridge
llc                    16384  2 bridge,stp
ip6table_nat           16384  1
nf_conntrack_ipv6      16384  5
nf_defrag_ipv6         20480  1 nf_conntrack_ipv6
nf_nat_ipv6            16384  1 ip6table_nat
ip6table_mangle        16384  1
ip6table_raw           16384  1
ip6table_security      16384  1
iptable_nat            16384  1
nf_conntrack_ipv4      16384  5
nf_defrag_ipv4         16384  1 nf_conntrack_ipv4
nf_nat_ipv4            16384  1 iptable_nat
nf_nat                 36864  2 nf_nat_ipv6,nf_nat_ipv4
nf_conntrack          147456  6 xt_conntrack,nf_conntrack_ipv6,nf_conntrack_ipv4,nf_nat,nf_nat_ipv6,nf_nat_ipv4
libcrc32c              16384  2 nf_conntrack,nf_nat
iptable_mangle         16384  1
iptable_raw            16384  1
iptable_security       16384  1
ebtable_filter         16384  1
ebtables               36864  3 ebtable_nat,ebtable_filter,ebtable_broute
ip6table_filter        16384  1
ip6_tables             28672  5 ip6table_filter,ip6table_raw,ip6table_nat,ip6table_mangle,ip6table_security
bnep                   24576  2
binfmt_misc            20480  1
sunrpc                434176  1
wl                   6463488  0
iTCO_wdt               16384  0
gpio_ich               16384  0
iTCO_vendor_support    16384  1 iTCO_wdt
btusb                  53248  0
btrtl                  16384  1 btusb
btbcm                  16384  1 btusb
dell_laptop            24576  0
btintel                24576  1 btusb
uvcvideo              114688  0
videobuf2_vmalloc      16384  1 uvcvideo
bluetooth             598016  27 btrtl,btintel,btbcm,bnep,btusb,rfcomm
videobuf2_memops       16384  1 videobuf2_vmalloc
dell_smm_hwmon         16384  0
videobuf2_v4l2         28672  1 uvcvideo
videobuf2_common       53248  2 videobuf2_v4l2,uvcvideo
cfg80211              770048  1 wl
videodev              208896  3 videobuf2_v4l2,uvcvideo,videobuf2_common
media                  45056  2 videodev,uvcvideo
dell_wmi               16384  0
ecdh_generic           24576  1 bluetooth
coretemp               16384  0
sparse_keymap          16384  1 dell_wmi
snd_hda_codec_realtek   110592  1
snd_hda_codec_generic    86016  1 snd_hda_codec_realtek
rfkill                 28672  5 bluetooth,dell_laptop,cfg80211
joydev                 24576  0
dell_smbios            28672  2 dell_wmi,dell_laptop
dcdbas                 16384  1 dell_smbios
dell_wmi_descriptor    16384  2 dell_wmi,dell_smbios
snd_hda_intel          45056  4
wmi_bmof               16384  0
snd_hda_codec         151552  3 snd_hda_codec_generic,snd_hda_intel,snd_hda_codec_realtek
snd_hda_core           94208  4 snd_hda_codec_generic,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek
snd_hwdep              16384  1 snd_hda_codec
i2c_i801               28672  0
lpc_ich                28672  0
snd_seq                81920  0
snd_seq_device         16384  1 snd_seq
snd_pcm               118784  3 snd_hda_intel,snd_hda_codec,snd_hda_core
shpchp                 40960  0
snd_timer              36864  2 snd_seq,snd_pcm
snd                    94208  17 snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm
soundcore              16384  1 snd
acpi_cpufreq           24576  1
dm_crypt               40960  1
nouveau              2023424  22
mxm_wmi                16384  1 nouveau
i2c_algo_bit           16384  1 nouveau
sdhci_pci              40960  0
drm_kms_helper        196608  1 nouveau
cqhci                  28672  1 sdhci_pci
sdhci                  57344  1 sdhci_pci
ttm                   126976  1 nouveau
serio_raw              16384  0
mmc_core              172032  3 sdhci,cqhci,sdhci_pci
drm                   458752  8 drm_kms_helper,ttm,nouveau
firewire_ohci          45056  0
firewire_core          81920  1 firewire_ohci
ata_generic            16384  0
pata_acpi              16384  0
r8169                  94208  0
crc_itu_t              16384  1 firewire_core
mii                    16384  1 r8169
wmi                    32768  6 dell_wmi,wmi_bmof,dell_smbios,dell_wmi_descriptor,mxm_wmi,nouveau
video                  45056  3 dell_wmi,dell_laptop,nouveau
$

je me demande si les noyaux 4.17 ne sont pas foireux:roll:.
A bientôt, et merci de ton aide.
pll

nouvo09 · 4 juil. 2018

et avec un modprobe ?

Nicosss · 4 juil. 2018

J'ai l'impression que l'on est dans la même problématique que https://forums.fedora-fr.org/viewtopic.php?id=67844.

Que retourne

$ dmesg

A voir côté Secure Boot dans le bios aussi.

Du fait que tu ais compilé le pilote, tu n'aurais pas une option dans un des fichiers pour désactiver la vérification de la signature ou quelque chose du genre ?

BBeta-Pictoris · 4 juil. 2018

La compilation s'est bien passée.

Tu peux installer le paquet kmod-wl ?

sudo -i
cd rpmbuild/RPMS/x86_64/
rpm -ivh kmod-wl-6.30.223.271-18.fc28.x86_64.rpm

Apparemment, le nom du module d'appelle "wl". Que donne ?

rpm -ql kmod-wl-6.30.223.271-18.fc28.x86_64.rpm

Si tu forces l'installation du module par un modprobe, que se passe t'il ?

pierrotlalune · 4 juil. 2018

Nicosss wrote:
Que retourne
$ dmesg
A voir côté Secure Boot dans le bios aussi.

Du fait que tu ais compilé le pilote, tu n'aurais pas une option dans un des fichiers pour désactiver la vérification de la signature ou quelque chose du genre ?

Bonsoir Nicosss:-),
voici le résultat de dmesg (le début est tronqué):

[    0.063131] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.063133] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[    0.063136] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.063147] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[    0.063293] pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400
[    0.063344] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.063493] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[    0.063571] pci 0000:00:1a.0: reg 0x20: [io  0x1800-0x181f]
[    0.063716] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[    0.063779] pci 0000:00:1a.1: reg 0x20: [io  0x1820-0x183f]
[    0.063923] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[    0.063950] pci 0000:00:1a.7: reg 0x10: [mem 0xf8304800-0xf8304bff]
[    0.064058] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.064178] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[    0.064210] pci 0000:00:1b.0: reg 0x10: [mem 0xf8300000-0xf8303fff 64bit]
[    0.064322] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.064451] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[    0.064571] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.064706] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[    0.064826] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.064958] pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
[    0.065081] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.065221] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
[    0.065339] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.065472] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[    0.065535] pci 0000:00:1d.0: reg 0x20: [io  0x1840-0x185f]
[    0.065669] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[    0.065734] pci 0000:00:1d.1: reg 0x20: [io  0x1860-0x187f]
[    0.065869] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[    0.065929] pci 0000:00:1d.2: reg 0x20: [io  0x1880-0x189f]
[    0.066080] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[    0.066110] pci 0000:00:1d.7: reg 0x10: [mem 0xf8304c00-0xf8304fff]
[    0.066217] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.066331] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.066514] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[    0.066632] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.066638] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.066642] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[    0.066646] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 007f)
[    0.066782] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[    0.066805] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[    0.066817] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[    0.066829] pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
[    0.066840] pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
[    0.066852] pci 0000:00:1f.1: reg 0x20: [io  0x18a0-0x18af]
[    0.066878] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.066880] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.066882] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.066884] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.066992] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[    0.067024] pci 0000:00:1f.2: reg 0x10: [io  0x18d8-0x18df]
[    0.067036] pci 0000:00:1f.2: reg 0x14: [io  0x18cc-0x18cf]
[    0.067047] pci 0000:00:1f.2: reg 0x18: [io  0x18d0-0x18d7]
[    0.067058] pci 0000:00:1f.2: reg 0x1c: [io  0x18c8-0x18cb]
[    0.067070] pci 0000:00:1f.2: reg 0x20: [io  0x18e0-0x18ff]
[    0.067082] pci 0000:00:1f.2: reg 0x24: [mem 0xf8304000-0xf83047ff]
[    0.067146] pci 0000:00:1f.2: PME# supported from D3hot
[    0.067260] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[    0.067283] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff]
[    0.067324] pci 0000:00:1f.3: reg 0x20: [io  0x1c00-0x1c1f]
[    0.067519] pci 0000:01:00.0: [10de:0427] type 00 class 0x030000
[    0.067552] pci 0000:01:00.0: reg 0x10: [mem 0xca000000-0xcaffffff]
[    0.067573] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.067594] pci 0000:01:00.0: reg 0x1c: [mem 0xc8000000-0xc9ffffff 64bit]
[    0.067609] pci 0000:01:00.0: reg 0x24: [io  0x2000-0x207f]
[    0.067622] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.067634] pci 0000:01:00.0: enabling Extended Tags
[    0.067812] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.067816] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.067819] pci 0000:00:01.0:   bridge window [mem 0xc8000000-0xcaffffff]
[    0.067823] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.067916] acpiphp: Slot [1] registered
[    0.067922] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.067927] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.067932] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc3ffffff]
[    0.067940] pci 0000:00:1c.0:   bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
[    0.068017] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.068022] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.068027] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf3ffffff]
[    0.068035] pci 0000:00:1c.1:   bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
[    0.068350] pci 0000:06:00.0: [14e4:4315] type 00 class 0x028000
[    0.068461] pci 0000:06:00.0: reg 0x10: [mem 0xf4000000-0xf4003fff 64bit]
[    0.068646] pci 0000:06:00.0: enabling Extended Tags
[    0.068888] pci 0000:06:00.0: supports D1 D2
[    0.068890] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[    0.069359] pci 0000:00:1c.3: PCI bridge to [bus 06]
[    0.069364] pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
[    0.069369] pci 0000:00:1c.3:   bridge window [mem 0xf4000000-0xf7ffffff]
[    0.069377] pci 0000:00:1c.3:   bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
[    0.069507] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
[    0.069607] pci 0000:07:00.0: reg 0x10: [io  0x6000-0x60ff]
[    0.069715] pci 0000:07:00.0: reg 0x18: [mem 0xf8410000-0xf8410fff 64bit pref]
[    0.069786] pci 0000:07:00.0: reg 0x20: [mem 0xf8400000-0xf840ffff 64bit pref]
[    0.069831] pci 0000:07:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.070125] pci 0000:07:00.0: supports D1 D2
[    0.070127] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.070403] pci 0000:00:1c.4: PCI bridge to [bus 07]
[    0.070408] pci 0000:00:1c.4:   bridge window [io  0x6000-0x6fff]
[    0.070418] pci 0000:00:1c.4:   bridge window [mem 0xf8400000-0xf84fffff 64bit pref]
[    0.070478] pci 0000:08:05.0: [1217:00f7] type 00 class 0x0c0010
[    0.070503] pci 0000:08:05.0: reg 0x10: [mem 0xf8000000-0xf8000fff]
[    0.070515] pci 0000:08:05.0: reg 0x14: [mem 0xf8002000-0xf80027ff]
[    0.070610] pci 0000:08:05.0: supports D1 D2
[    0.070612] pci 0000:08:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.070681] pci 0000:08:05.2: [1217:7120] type 00 class 0x080501
[    0.070712] pci 0000:08:05.2: reg 0x10: [mem 0xf8002800-0xf80028ff]
[    0.070830] pci 0000:08:05.2: supports D1 D2
[    0.070832] pci 0000:08:05.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.070904] pci 0000:08:05.3: [1217:7130] type 00 class 0x018000
[    0.070934] pci 0000:08:05.3: reg 0x10: [mem 0xf8001000-0xf8001fff]
[    0.071057] pci 0000:08:05.3: supports D1 D2
[    0.071059] pci 0000:08:05.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.071168] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
[    0.071176] pci 0000:00:1e.0:   bridge window [mem 0xf8000000-0xf80fffff]
[    0.071184] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.071186] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.071188] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.071191] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.071193] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.071195] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.071197] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xdfffffff window] (subtractive decode)
[    0.071199] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
[    0.071401] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    0.071471] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.071540] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.071608] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.071675] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.071745] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.071813] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.071881] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.109188] ACPI: EC: interrupt unblocked
[    0.109210] ACPI: EC: event unblocked
[    0.109221] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.109223] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.109330] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.109330] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.109330] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.109330] vgaarb: loaded
[    0.109330] SCSI subsystem initialized
[    0.109330] libata version 3.00 loaded.
[    0.109330] ACPI: bus type USB registered
[    0.109330] usbcore: registered new interface driver usbfs
[    0.109330] usbcore: registered new interface driver hub
[    0.109330] usbcore: registered new device driver usb
[    0.109330] pps_core: LinuxPPS API ver. 1 registered
[    0.109330] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.109330] PTP clock support registered
[    0.109330] EDAC MC: Ver: 3.0.0
[    0.110085] PCI: Using ACPI for IRQ routing
[    0.121472] PCI: pci_cache_line_size set to 64 bytes
[    0.121953] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.121955] e820: reserve RAM buffer [mem 0x7fed0000-0x7fffffff]
[    0.122110] NetLabel: Initializing
[    0.122111] NetLabel:  domain hash size = 128
[    0.122112] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.122137] NetLabel:  unlabeled traffic allowed by default
[    0.122142] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.122142] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.122142] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.124035] clocksource: Switched to clocksource tsc-early
[    0.149061] VFS: Disk quotas dquot_6.6.0
[    0.149087] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.149202] pnp: PnP ACPI init
[    0.149472] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.149475] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.149478] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.149480] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.149483] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.149486] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.149488] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.149490] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.149499] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.149828] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.149835] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.149914] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.149917] system 00:02: [io  0x0800-0x080f] has been reserved
[    0.149920] system 00:02: [io  0x1000-0x107f] has been reserved
[    0.149922] system 00:02: [io  0x1180-0x11bf] has been reserved
[    0.149925] system 00:02: [io  0xfe00] has been reserved
[    0.149927] system 00:02: [io  0xff00-0xff7f] has been reserved
[    0.149941] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.149978] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.179990] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.180022] pnp 00:05: Plug and Play ACPI device, IDs SYN0705 SYN0700 SYN0002 PNP0f13 (active)
[    0.180043] pnp: PnP ACPI: found 6 devices
[    0.186687] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.197165] ssb: Found chip with id 0x4312, rev 0x01 and package 0x00
[    0.197181] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243)
[    0.197194] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor 0x4243)
[    0.197204] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243)
[    0.197214] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243)
[    0.232407] ssb: Sonics Silicon Backplane found on PCI device 0000:06:00.0
[    0.232487] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x001fffff] to [bus 07] add_size 400000 add_align 100000
[    0.232510] pci 0000:00:1c.4: BAR 14: assigned [mem 0x80000000-0x804fffff]
[    0.232514] pci 0000:00:1f.3: BAR 0: assigned [mem 0x80500000-0x805000ff]
[    0.232522] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00020000 pref]
[    0.232525] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00020000 pref]
[    0.232527] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.232530] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.232534] pci 0000:00:01.0:   bridge window [mem 0xc8000000-0xcaffffff]
[    0.232538] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.232543] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.232546] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.232552] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc3ffffff]
[    0.232557] pci 0000:00:1c.0:   bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
[    0.232565] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.232568] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.232574] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf3ffffff]
[    0.232579] pci 0000:00:1c.1:   bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
[    0.232588] pci 0000:07:00.0: BAR 6: assigned [mem 0x80000000-0x8000ffff pref]
[    0.232590] pci 0000:00:1c.4: PCI bridge to [bus 07]
[    0.232593] pci 0000:00:1c.4:   bridge window [io  0x6000-0x6fff]
[    0.232599] pci 0000:00:1c.4:   bridge window [mem 0x80000000-0x804fffff]
[    0.232604] pci 0000:00:1c.4:   bridge window [mem 0xf8400000-0xf84fffff 64bit pref]
[    0.232613] pci 0000:00:1e.0: PCI bridge to [bus 08]
[    0.232619] pci 0000:00:1e.0:   bridge window [mem 0xf8000000-0xf80fffff]
[    0.232631] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.232633] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.232635] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.232637] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.232639] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.232641] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.232644] pci_bus 0000:00: resource 10 [mem 0x80000000-0xdfffffff window]
[    0.232646] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff window]
[    0.232648] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.232650] pci_bus 0000:01: resource 1 [mem 0xc8000000-0xcaffffff]
[    0.232652] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.232654] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.232656] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc3ffffff]
[    0.232658] pci_bus 0000:02: resource 2 [mem 0xcc000000-0xcdffffff 64bit pref]
[    0.232660] pci_bus 0000:03: resource 0 [io  0x4000-0x4fff]
[    0.232662] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf3ffffff]
[    0.232664] pci_bus 0000:03: resource 2 [mem 0xfa000000-0xfbffffff 64bit pref]
[    0.232666] pci_bus 0000:06: resource 0 [io  0x5000-0x5fff]
[    0.232668] pci_bus 0000:06: resource 1 [mem 0xf4000000-0xf7ffffff]
[    0.232670] pci_bus 0000:06: resource 2 [mem 0xfc000000-0xfdffffff 64bit pref]
[    0.232672] pci_bus 0000:07: resource 0 [io  0x6000-0x6fff]
[    0.232674] pci_bus 0000:07: resource 1 [mem 0x80000000-0x804fffff]
[    0.232676] pci_bus 0000:07: resource 2 [mem 0xf8400000-0xf84fffff 64bit pref]
[    0.232678] pci_bus 0000:08: resource 1 [mem 0xf8000000-0xf80fffff]
[    0.232681] pci_bus 0000:08: resource 4 [io  0x0000-0x0cf7 window]
[    0.232683] pci_bus 0000:08: resource 5 [io  0x0d00-0xffff window]
[    0.232685] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.232687] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.232689] pci_bus 0000:08: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.232691] pci_bus 0000:08: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.232693] pci_bus 0000:08: resource 10 [mem 0x80000000-0xdfffffff window]
[    0.232695] pci_bus 0000:08: resource 11 [mem 0xf0000000-0xfebfffff window]
[    0.232818] NET: Registered protocol family 2
[    0.233048] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
[    0.233067] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.233138] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.233240] TCP: Hash tables configured (established 16384 bind 16384)
[    0.233309] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.233325] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.233440] NET: Registered protocol family 1
[    0.235560] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.235776] PCI: CLS 64 bytes, default 64
[    0.235836] Unpacking initramfs...
[    0.739783] Freeing initrd memory: 23520K
[    0.741195] Initialise system trusted keyrings
[    0.741211] Key type blacklist registered
[    0.741253] workingset: timestamp_bits=36 max_order=19 bucket_order=0
[    0.743631] zbud: loaded
[    0.744387] pstore: using deflate compression
[    0.744465] SELinux:  Registering netfilter hooks
[    1.041748] alg: No test for 842 (842-generic)
[    1.041778] alg: No test for 842 (842-scomp)
[    1.050140] NET: Registered protocol family 38
[    1.050145] Key type asymmetric registered
[    1.050146] Asymmetric key parser 'x509' registered
[    1.050227] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.050268] io scheduler noop registered
[    1.050270] io scheduler deadline registered
[    1.050348] io scheduler cfq registered (default)
[    1.050350] io scheduler mq-deadline registered
[    1.050414] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    1.051556] intel_idle: does not run on family 6 model 15
[    1.053701] ACPI: AC Adapter [ACAD] (off-line)
[    1.053773] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.053788] ACPI: Lid Switch [LID0]
[    1.053836] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.053845] ACPI: Power Button [PWRB]
[    1.053890] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    1.053900] ACPI: Sleep Button [SLPB]
[    1.053962] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.053973] ACPI: Power Button [PWRF]
[    1.054363] Monitor-Mwait will be used to enter C-1 state
[    1.054369] Monitor-Mwait will be used to enter C-2 state
[    1.054373] Monitor-Mwait will be used to enter C-3 state
[    1.054376] tsc: Marking TSC unstable due to TSC halts in idle
[    1.054442] clocksource: Switched to clocksource hpet
[    1.056200] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.217038] random: fast init done
[    1.274564] ACPI: Battery Slot [BAT1] (battery present)
[    1.274804] Non-volatile memory driver v1.3
[    1.274893] Linux agpgart interface v0.103
[    1.275434] ahci 0000:00:1f.2: version 3.0
[    1.275701] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[    1.275705] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc 
[    1.276331] scsi host0: ahci
[    1.276575] scsi host1: ahci
[    1.276719] scsi host2: ahci
[    1.276772] ata1: SATA max UDMA/133 abar m2048@0xf8304000 port 0xf8304100 irq 24
[    1.276775] ata2: SATA max UDMA/133 abar m2048@0xf8304000 port 0xf8304180 irq 24
[    1.276777] ata3: SATA max UDMA/133 abar m2048@0xf8304000 port 0xf8304200 irq 24
[    1.276859] ata_piix 0000:00:1f.1: version 2.13
[    1.277824] scsi host3: ata_piix
[    1.277978] scsi host4: ata_piix
[    1.278038] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[    1.278040] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[    1.278138] libphy: Fixed MDIO Bus: probed
[    1.278250] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.278254] ehci-pci: EHCI PCI platform driver
[    1.278449] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    1.278617] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.278633] ehci-pci 0000:00:1a.7: debug port 1
[    1.282557] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    1.282571] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf8304800
[    1.289105] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.289360] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    1.289363] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.289365] usb usb1: Product: EHCI Host Controller
[    1.289367] usb usb1: Manufacturer: Linux 4.17.3-200.fc28.x86_64 ehci_hcd
[    1.289369] usb usb1: SerialNumber: 0000:00:1a.7
[    1.289573] hub 1-0:1.0: USB hub found
[    1.289601] hub 1-0:1.0: 4 ports detected
[    1.290059] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.290119] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.290136] ehci-pci 0000:00:1d.7: debug port 1
[    1.294062] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.294079] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf8304c00
[    1.302132] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.302215] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    1.302220] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.302223] usb usb2: Product: EHCI Host Controller
[    1.302227] usb usb2: Manufacturer: Linux 4.17.3-200.fc28.x86_64 ehci_hcd
[    1.302231] usb usb2: SerialNumber: 0000:00:1d.7
[    1.302424] hub 2-0:1.0: USB hub found
[    1.302433] hub 2-0:1.0: 6 ports detected
[    1.302650] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.302654] ohci-pci: OHCI PCI platform driver
[    1.302668] uhci_hcd: USB Universal Host Controller Interface driver
[    1.302822] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.302913] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.302922] uhci_hcd 0000:00:1a.0: detected 2 ports
[    1.302953] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[    1.303025] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.17
[    1.303028] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.303030] usb usb3: Product: UHCI Host Controller
[    1.303032] usb usb3: Manufacturer: Linux 4.17.3-200.fc28.x86_64 uhci_hcd
[    1.303034] usb usb3: SerialNumber: 0000:00:1a.0
[    1.303186] hub 3-0:1.0: USB hub found
[    1.303194] hub 3-0:1.0: 2 ports detected
[    1.303451] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.303545] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.303553] uhci_hcd 0000:00:1a.1: detected 2 ports
[    1.303585] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[    1.303647] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.17
[    1.303650] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.303652] usb usb4: Product: UHCI Host Controller
[    1.303654] usb usb4: Manufacturer: Linux 4.17.3-200.fc28.x86_64 uhci_hcd
[    1.303656] usb usb4: SerialNumber: 0000:00:1a.1
[    1.303811] hub 4-0:1.0: USB hub found
[    1.303819] hub 4-0:1.0: 2 ports detected
[    1.304102] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.304169] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    1.304177] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.304199] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[    1.304263] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.17
[    1.304266] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.304268] usb usb5: Product: UHCI Host Controller
[    1.304270] usb usb5: Manufacturer: Linux 4.17.3-200.fc28.x86_64 uhci_hcd
[    1.304272] usb usb5: SerialNumber: 0000:00:1d.0
[    1.304406] hub 5-0:1.0: USB hub found
[    1.304414] hub 5-0:1.0: 2 ports detected
[    1.304669] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.304738] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    1.304746] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.304776] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[    1.304836] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.17
[    1.304838] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.304840] usb usb6: Product: UHCI Host Controller
[    1.304842] usb usb6: Manufacturer: Linux 4.17.3-200.fc28.x86_64 uhci_hcd
[    1.304845] usb usb6: SerialNumber: 0000:00:1d.1
[    1.304995] hub 6-0:1.0: USB hub found
[    1.305017] hub 6-0:1.0: 2 ports detected
[    1.305274] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.305345] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    1.305353] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.305376] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[    1.305441] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.17
[    1.305443] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.305445] usb usb7: Product: UHCI Host Controller
[    1.305447] usb usb7: Manufacturer: Linux 4.17.3-200.fc28.x86_64 uhci_hcd
[    1.305449] usb usb7: SerialNumber: 0000:00:1d.2
[    1.305589] hub 7-0:1.0: USB hub found
[    1.305599] hub 7-0:1.0: 2 ports detected
[    1.305781] usbcore: registered new interface driver usbserial_generic
[    1.305788] usbserial: USB Serial support registered for generic
[    1.305832] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.328790] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.328796] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.328935] mousedev: PS/2 mouse device common for all mice
[    1.330092] rtc_cmos 00:03: RTC can wake from S4
[    1.330293] rtc_cmos 00:03: registered as rtc0
[    1.330295] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.330378] device-mapper: uevent: version 1.0.3
[    1.330471] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    1.330805] hidraw: raw HID events driver (C) Jiri Kosina
[    1.330860] usbcore: registered new interface driver usbhid
[    1.330861] usbhid: USB HID core driver
[    1.330992] drop_monitor: Initializing network drop monitor service
[    1.331360] Initializing XFRM netlink socket
[    1.331561] NET: Registered protocol family 10
[    1.335053] Segment Routing with IPv6
[    1.335087] mip6: Mobile IPv6
[    1.335090] NET: Registered protocol family 17
[    1.335454] RAS: Correctable Errors collector initialized.
[    1.335494] microcode: sig=0x6fd, pf=0x80, revision=0xa4
[    1.335560] microcode: Microcode Update Driver: v2.2.
[    1.335767] registered taskstats version 1
[    1.335780] Loading compiled-in X.509 certificates
[    1.360796] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.411415] Loaded X.509 cert 'Fedora kernel signing key: 73d93265cead015846b96b84fecbac1648ac7e62'
[    1.411453] zswap: loaded using pool lzo/zbud
[    1.414968] Key type big_key registered
[    1.418573] Key type encrypted registered
[    1.418578] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.418586] ima: Allocated hash algorithm: sha1
[    1.419103]   Magic number: 10:763:1000
[    1.419110] misc memory_bandwidth: hash matches
[    1.419180] system 00:02: hash matches
[    1.419290] rtc_cmos 00:03: setting system clock to 2018-07-04 19:57:29 UTC (1530734249)
[    1.419350] Unstable clock detected, switching default tracing clock to "global"
               If you want to keep using the local clock, then add:
                 "trace_clock=local"
               on the kernel command line
[    1.434776] ata4.00: ATAPI: Optiarc DVD+/-RW AD-7640A, JD06, max UDMA/33
[    1.439655] ata4.00: configured for UDMA/33
[    1.582200] ata2: SATA link down (SStatus 0 SControl 300)
[    1.584605] ata3: SATA link down (SStatus 0 SControl 300)
[    1.585609] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.586461] ata1.00: unexpected _GTF length (8)
[    1.627925] ata1.00: ATA-8: WDC WD1600BEVT-75ZCT2, 11.01A11, max UDMA/133
[    1.627930] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.634587] ata1.00: unexpected _GTF length (8)
[    1.634874] ata1.00: configured for UDMA/133
[    1.635271] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600BEVT-7 1A11 PQ: 0 ANSI: 5
[    1.635614] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.635638] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.635673] sd 0:0:0:0: [sda] Write Protect is off
[    1.635676] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.635707] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.636854] scsi 3:0:0:0: CD-ROM            Optiarc  DVD+-RW AD-7640A JD06 PQ: 0 ANSI: 5
[    1.647280]  sda: sda1 sda2
[    1.647850] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.679281] sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
[    1.679284] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.679442] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.679575] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    1.683183] Freeing unused kernel memory: 2148K
[    1.685123] Write protecting the kernel read-only data: 18432k
[    1.687366] Freeing unused kernel memory: 2012K
[    1.687706] Freeing unused kernel memory: 76K
[    1.701631] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.701632] x86/mm: Checking user space page tables
[    1.715391] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.715402] rodata_test: all tests were successful
[    1.733775] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    1.745227] systemd[1]: Detected architecture x86-64.
[    1.745234] systemd[1]: Running in initial RAM disk.
[    1.749115] systemd[1]: Set hostname to <alexdell>.
[    1.754048] usb 6-1: new low-speed USB device number 2 using uhci_hcd
[    1.803061] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[    1.834522] random: systemd: uninitialized urandom read (16 bytes read)
[    1.834545] systemd[1]: Reached target Timers.
[    1.834624] random: systemd: uninitialized urandom read (16 bytes read)
[    1.837455] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[    1.837485] random: systemd: uninitialized urandom read (16 bytes read)
[    1.837608] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.837644] systemd[1]: Reached target Local File Systems.
[    1.837689] systemd[1]: Reached target Slices.
[    1.837743] systemd[1]: Reached target Swap.
[    1.890660] audit: type=1130 audit(1530734249.969:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.947164] usb 6-1: New USB device found, idVendor=04b4, idProduct=0102, bcdDevice= 0.01
[    1.947168] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.947171] usb 6-1: Product: Cypress USB Keyboard
[    1.947173] usb 6-1: Manufacturer: Cypress
[    1.974742] input: Cypress Cypress USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/0003:04B4:0102.0001/input/input7
[    2.006637] usb 3-2: New USB device found, idVendor=413c, idProduct=8140, bcdDevice=43.15
[    2.006641] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.026412] hid-generic 0003:04B4:0102.0001: input,hidraw0: USB HID v1.00 Keyboard [Cypress Cypress USB Keyboard] on usb-0000:00:1d.1-1/input0
[    2.032795] audit: type=1130 audit(1530734250.111:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.120995] audit: type=1130 audit(1530734250.199:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.121016] audit: type=1131 audit(1530734250.199:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.198428] audit: type=1130 audit(1530734250.276:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.239537] audit: type=1130 audit(1530734250.318:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.257665] audit: type=1130 audit(1530734250.335:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.499043] usb 1-3: new high-speed USB device number 3 using ehci-pci
[    2.527293] audit: type=1130 audit(1530734250.604:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.533506] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    2.567114] audit: type=1130 audit(1530734250.645:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.577512] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[    2.590905] acpi device:03: registered as cooling_device2
[    2.590989] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
[    2.657337] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.657355] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.658000] r8169 0000:07:00.0 eth0: RTL8168c/8111c at 0x        (ptrval), 00:24:e8:91:4a:1d, XID 1c4000c0 IRQ 25
[    2.658026] r8169 0000:07:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[    2.680710] usb 6-2: new low-speed USB device number 3 using uhci_hcd
[    2.681999] usb 1-3: New USB device found, idVendor=0c45, idProduct=63e0, bcdDevice=84.23
[    2.682016] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    2.682019] usb 1-3: Product: Integrated Webcam
[    2.682021] usb 1-3: Manufacturer: SONiX Technology Inc
[    2.682023] usb 1-3: SerialNumber: M09-001
[    2.761274] firewire_ohci 0000:08:05.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x10
[    2.772417] sdhci: Secure Digital Host Controller Interface driver
[    2.772419] sdhci: Copyright(c) Pierre Ossman
[    2.824643] sdhci-pci 0000:08:05.2: SDHCI controller found [1217:7120] (rev 2)
[    2.824795] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[    2.832087] mmc0: SDHCI controller on PCI [0000:08:05.2] using DMA
[    2.860162] usb 6-2: New USB device found, idVendor=046d, idProduct=c045, bcdDevice=27.30
[    2.860166] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.860169] usb 6-2: Product: USB-PS/2 Optical Mouse
[    2.860171] usb 6-2: Manufacturer: Logitech
[    2.876768] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/0003:046D:C045.0002/input/input9
[    2.876909] hid-generic 0003:046D:C045.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2/input0
[    2.884788] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6
[    2.891885] r8169 0000:07:00.0 enp7s0: renamed from eth0
[    3.039542] nouveau 0000:01:00.0: NVIDIA G86 (086700a2)
[    3.060897] nouveau 0000:01:00.0: bios: version 60.86.64.00.27
[    3.107193] nouveau 0000:01:00.0: bios: M0203T not found
[    3.107196] nouveau 0000:01:00.0: bios: M0203E not matched!
[    3.107200] nouveau 0000:01:00.0: fb: 256 MiB DDR2
[    3.261045] [TTM] Zone  kernel: Available graphics memory: 1019524 kiB
[    3.261046] [TTM] Initializing pool allocator
[    3.261052] [TTM] Initializing DMA pool allocator
[    3.261084] nouveau 0000:01:00.0: DRM: VRAM: 256 MiB
[    3.261086] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    3.261091] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    3.261093] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    3.261096] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000323 00010034
[    3.261099] nouveau 0000:01:00.0: DRM: DCB outp 01: 02011300 00000028
[    3.261102] nouveau 0000:01:00.0: DRM: DCB conn 00: 0040
[    3.261104] nouveau 0000:01:00.0: DRM: DCB conn 01: 0100
[    3.264106] firewire_core 0000:08:05.0: created device fw0: GUID 00000010a000b000, S400
[    3.271501] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.271503] [drm] Driver supports precise vblank timestamp query.
[    3.273817] nouveau 0000:01:00.0: DRM: MM: using CRYPT for buffer copies
[    3.315777] nouveau 0000:01:00.0: DRM: allocated 1280x800 fb: 0x60000, bo         (ptrval)
[    3.370467] fbcon: nouveaufb (fb0) is primary device
[    4.494581] Console: switching to colour frame buffer device 160x50
[    4.511209] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    4.516141] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[    7.905551] random: crng init done
[    7.905557] random: 7 urandom warning(s) missed due to ratelimiting
[   14.789324] kauditd_printk_skb: 3 callbacks suppressed
[   14.789326] audit: type=1130 audit(1530734262.867:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-cryptsetup@luks\x2d07a01f7b\x2dc481\x2d4ecf\x2dad6d\x2d0a8104b8b991 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.331838] audit: type=1130 audit(1530734263.410:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.458055] audit: type=1130 audit(1530734263.535:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.502056] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[   15.694742] audit: type=1130 audit(1530734263.773:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.694782] audit: type=1131 audit(1530734263.773:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.864975] audit: type=1130 audit(1530734263.943:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.877727] audit: type=1131 audit(1530734263.956:20): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.883258] audit: type=1130 audit(1530734263.961:21): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.883264] audit: type=1131 audit(1530734263.961:22): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.885684] audit: type=1130 audit(1530734263.964:23): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.134232] systemd-journald[174]: Received SIGTERM from PID 1 (systemd).
[   16.470370] systemd: 17 output lines suppressed due to ratelimiting
[   18.656888] SELinux: 32768 avtab hash slots, 114477 rules.
[   18.684083] SELinux: 32768 avtab hash slots, 114477 rules.
[   19.099911] SELinux:  8 users, 14 roles, 5117 types, 319 bools, 1 sens, 1024 cats
[   19.099917] SELinux:  129 classes, 114477 rules
[   19.108182] SELinux:  Permission name_connect in class sctp_socket not defined in policy.
[   19.108185] SELinux:  Permission association in class sctp_socket not defined in policy.
[   19.108283] SELinux:  Class bpf not defined in policy.
[   19.108284] SELinux: the above unknown classes and permissions will be allowed
[   19.108295] SELinux:  policy capability network_peer_controls=1
[   19.108296] SELinux:  policy capability open_perms=1
[   19.108296] SELinux:  policy capability extended_socket_class=1
[   19.108297] SELinux:  policy capability always_check_network=0
[   19.108298] SELinux:  policy capability cgroup_seclabel=1
[   19.108299] SELinux:  policy capability nnp_nosuid_transition=1
[   19.108301] SELinux:  Completing initialization.
[   19.108301] SELinux:  Setting up existing superblocks.
[   19.176097] systemd[1]: Successfully loaded SELinux policy in 780.176ms.
[   19.475649] systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 47.078ms.
[   19.546106] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[   19.558242] systemd[1]: Detected architecture x86-64.
[   19.585872] systemd[1]: Set hostname to <alexdell>.
[   23.547573] systemd[1]: /usr/lib/systemd/system/rsyslog.service:21: Unknown lvalue 'LimitNOFILE' in section 'Install'
[   25.563230] systemd[1]: Unnecessary job for dev-disk-by\x2duuid-07a01f7b\x2dc481\x2d4ecf\x2dad6d\x2d0a8104b8b991.device was removed.
[   25.572084] kauditd_printk_skb: 27 callbacks suppressed
[   25.572086] audit: type=1130 audit(1530734273.652:51): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   25.572124] audit: type=1131 audit(1530734273.652:52): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   25.573347] systemd[1]: Stopped Switch Root.
[   25.573681] audit: type=1130 audit(1530734273.653:53): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   25.573685] audit: type=1131 audit(1530734273.653:54): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   25.573913] systemd[1]: systemd-journald.service: Service has no hold-off time, scheduling restart.
[   25.574087] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[   25.574146] systemd[1]: Stopped Journal Service.
[   25.574195] audit: type=1130 audit(1530734273.654:55): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   25.574198] audit: type=1131 audit(1530734273.654:56): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   25.576528] systemd[1]: Starting Journal Service...
[   25.579435] systemd[1]: Listening on udev Control Socket.
[   25.580204] systemd[1]: Created slice system-getty.slice.
[   25.581265] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   25.597113] systemd[1]: Listening on Process Core Dump Socket.
[   25.893434] audit: type=1305 audit(1530734273.973:57): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:syslogd_t:s0 res=1
[   26.127486] audit: type=1130 audit(1530734274.207:58): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   26.132337] audit: type=1130 audit(1530734274.212:59): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   26.160492] EXT4-fs (dm-2): re-mounted. Opts: (null)
[   26.164852] audit: type=1130 audit(1530734274.244:60): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   26.531605] systemd-journald[734]: Received request to flush runtime journal from PID 1
[   30.228869] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   31.303544] kauditd_printk_skb: 8 callbacks suppressed
[   31.303546] audit: type=1130 audit(1530734279.383:69): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-backlight@backlight:acpi_video0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   31.418000] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   31.547241] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   31.548416] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   31.610608] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   31.610613] cfg80211: failed to load regulatory.db
[   31.933610] media: Linux media interface: v0.10
[   31.967655] Linux video capture interface: v2.00
[   32.318991] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   32.368046] Bluetooth: Core ver 2.22
[   32.368102] NET: Registered protocol family 31
[   32.368104] Bluetooth: HCI device and connection manager initialized
[   32.368109] Bluetooth: HCI socket layer initialized
[   32.368113] Bluetooth: L2CAP socket layer initialized
[   32.368129] Bluetooth: SCO socket layer initialized
[   32.494242] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS
[   32.589634] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input10
[   32.894311] wl: loading out-of-tree module taints kernel.
[   32.894317] wl: module license 'MIXED/Proprietary' taints kernel.
[   32.894318] Disabling lock debugging due to kernel taint
[   32.902941] wl: module verification failed: signature and/or required key missing - tainting kernel
[   32.911426] usbcore: registered new interface driver btusb
[   33.205393] intel_powerclamp: No package C-state available
[   33.207717] iTCO_vendor_support: vendor-support=0
[   33.404896] gpio_ich: GPIO from 446 to 495 on gpio_ich
[   33.506353] uvcvideo: Found UVC 1.00 device Integrated Webcam (0c45:63e0)
[   33.529545] uvcvideo 1-3:1.0: Entity type for entity Extension 5 was not initialized!
[   33.529548] uvcvideo 1-3:1.0: Entity type for entity Extension 4 was not initialized!
[   33.529551] uvcvideo 1-3:1.0: Entity type for entity Processing 3 was not initialized!
[   33.529553] uvcvideo 1-3:1.0: Entity type for entity Camera 1 was not initialized!
[   33.529671] input: Integrated Webcam: Integrated W as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input11
[   33.529787] usbcore: registered new interface driver uvcvideo
[   33.529788] USB Video Class driver (1.1.1)
[   33.561399] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   33.561473] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[   33.561855] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   33.936619] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC268: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   33.936623] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   33.936626] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   33.936628] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   33.936630] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   33.936633] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   33.936635] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   33.945725] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   33.945832] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   34.486117] audit: type=1130 audit(1530734282.566:70): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   35.440983] Adding 2097148k swap on /dev/mapper/fedora_alexdell-swap.  Priority:-2 extents:1 across:2097148k FS
[   35.699255] audit: type=1130 audit(1530734283.779:71): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   35.704374] audit: type=1130 audit(1530734283.784:72): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   37.662409] audit: type=1130 audit(1530734285.742:73): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   37.662431] audit: type=1131 audit(1530734285.742:74): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   37.832300] audit: type=1130 audit(1530734285.912:75): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   38.017108] audit: type=1130 audit(1530734286.097:76): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-pvscan@253:0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   39.092910] audit: type=1130 audit(1530734287.172:77): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-17b9e787\x2d4479\x2d4d20\x2d8ffd\x2dae39127fbb8e comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   39.197832] audit: type=1130 audit(1530734287.277:78): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-mapper-fedora_alexdell\x2dhome comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   39.492635] audit: type=1131 audit(1530734287.572:79): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   39.657042] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   39.705620] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[   40.024879] audit: type=1130 audit(1530734288.104:80): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   40.498568] audit: type=1130 audit(1530734288.578:81): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   40.498574] audit: type=1131 audit(1530734288.578:82): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   46.417256] kauditd_printk_skb: 3 callbacks suppressed
[   46.417258] audit: type=1130 audit(1530734294.497:86): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   46.908072] audit: type=1130 audit(1530734294.987:87): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   47.071366] RPC: Registered named UNIX socket transport module.
[   47.071369] RPC: Registered udp transport module.
[   47.071370] RPC: Registered tcp transport module.
[   47.071371] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   47.431714] audit: type=1305 audit(1530734295.511:88): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
[   47.431719] audit: type=1305 audit(1530734295.511:89): audit_pid=932 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
[   60.357326] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   60.357328] Bluetooth: BNEP filters: protocol multicast
[   60.357339] Bluetooth: BNEP socket layer initialized
[   85.109990] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   97.294397] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
[   97.323199] r8169 0000:07:00.0 enp7s0: link down
[   97.323202] r8169 0000:07:00.0 enp7s0: link down
[   97.323325] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
[   98.996070] r8169 0000:07:00.0 enp7s0: link up
[   98.996086] IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready
[  172.336889] Bluetooth: RFCOMM TTY layer initialized
[  172.336900] Bluetooth: RFCOMM socket layer initialized
[  172.337078] Bluetooth: RFCOMM ver 1.11
[  581.887044] r8169 0000:07:00.0 enp7s0: link down
[  610.851168] perf: interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[  795.303693] perf: interrupt took too long (3147 > 3130), lowering kernel.perf_event_max_sample_rate to 63000
[  849.662151] r8169 0000:07:00.0 enp7s0: link up
[  873.521510] r8169 0000:07:00.0 enp7s0: link down
[  876.358915] r8169 0000:07:00.0 enp7s0: link up
[ 1076.212893] perf: interrupt took too long (3936 > 3933), lowering kernel.perf_event_max_sample_rate to 50000
[ 1197.158371] nouveau 0000:01:00.0: fifo: CACHE_ERROR - ch 3 [Xorg[1314]] subc 0 mthd 0060 data beef0201
[ 1199.097799] nouveau 0000:01:00.0: fifo: CACHE_ERROR - ch 2 [Xorg[1314]] subc 0 mthd 0060 data beef0201
[ 1200.881778] nouveau 0000:01:00.0: fifo: CACHE_ERROR - ch 2 [Xorg[1314]] subc 0 mthd 0060 data beef0201
[ 1575.601679] nouveau 0000:01:00.0: fifo: CACHE_ERROR - ch 2 [Xorg[1314]] subc 0 mthd 0060 data beef0201
[ 1639.806078] nouveau 0000:01:00.0: Xorg[1314]: fail ttm_validate
[ 1639.806085] nouveau 0000:01:00.0: Xorg[1314]: validating bo list
[ 1639.806104] nouveau 0000:01:00.0: Xorg[1314]: validate: -12
[ 1665.755641] nouveau 0000:01:00.0: Xorg[1314]: fail ttm_validate
[ 1665.755648] nouveau 0000:01:00.0: Xorg[1314]: validating bo list
[ 1665.755669] nouveau 0000:01:00.0: Xorg[1314]: validate: -12
[ 1666.251249] nouveau 0000:01:00.0: Xorg[1314]: fail ttm_validate
[ 1666.251256] nouveau 0000:01:00.0: Xorg[1314]: validating bo list
[ 1666.251277] nouveau 0000:01:00.0: Xorg[1314]: validate: -12
[ 1667.940321] nouveau 0000:01:00.0: Xorg[1314]: fail ttm_validate
[ 1667.940328] nouveau 0000:01:00.0: Xorg[1314]: validating bo list
[ 1667.940349] nouveau 0000:01:00.0: Xorg[1314]: validate: -12
[ 1668.211356] nouveau 0000:01:00.0: Xorg[1314]: fail ttm_validate
[ 1668.211363] nouveau 0000:01:00.0: Xorg[1314]: validating bo list
[ 1668.211379] nouveau 0000:01:00.0: Xorg[1314]: validate: -12
[ 1738.505664] nouveau 0000:01:00.0: fifo: CACHE_ERROR - ch 2 [Xorg[1314]] subc 0 mthd 0060 data beef0201
$

Toutefois, je remarque ceci:

[   32.894311] wl: loading out-of-tree module taints kernel.
[   32.894317] wl: module license 'MIXED/Proprietary' taints kernel.
[   32.894318] Disabling lock debugging due to kernel taint
[   32.902941] wl: module verification failed: signature and/or required key missing - tainting kernel

J'ai l'impression que le problème est là. Une idée pour résoudre ?
Pour le secure boot , je vais cherché...
a +
pll

pierrotlalune · 4 juil. 2018

Pour Beta-Pictoris & nouvo09,
j'ai fait un:

#modprobe wl

Il ne se passe rien...
a +
pll

Nicosss · 4 juil. 2018

Effectivement on retombe sur le même problème lors du chargement du module wl. Il y a une option qui a été activée entre temps avec le passage au kernel 4.17.

Du coup voir du côté de ce que je t'ai proposé.

nouvo09 · 4 juil. 2018

pierrotlalune wrote:Pour Beta-Pictoris & nouvo09,
j'ai fait un:
#modprobe wl
Il ne se passe rien...
a +
pll

modprobe n'est pas bavard, il ne répond pas. Et en principe dans ce cas il a exécuté la commande.

A présent exécute un

lsmod | grep wl

pour voir si quelque chose a changé.

BBeta-Pictoris · 4 juil. 2018

pierrotlalune wrote: Toutefois, je remarque ceci:
[   32.894311] wl: loading out-of-tree module taints kernel.
[   32.894317] wl: module license 'MIXED/Proprietary' taints kernel.
[   32.894318] Disabling lock debugging due to kernel taint
[   32.902941] wl: module verification failed: signature and/or required key missing - tainting kernel
J'ai l'impression que le problème est là. Une idée pour résoudre ?
Pour le secure boot , je vais cherché...
a +
pll

Ce sont des paramètres du noyau linux qui activent la signature des modules: https://www.kernel.org/doc/html/v4.10/admin-guide/module-signing.html

Tu pourras vérifier quels paramètres sont activés en faisant ceci:

grep CONFIG_MODULE_SIG /boot/config-$(uname -r)

Si l'option 'CONFIG_MODULE_SIG_FORCE' n'est pas activée, on devrait juste avoir un message d'avertissement. Comme le message que tu as trouvé j'ai l'impression.

A noter, dans le lien au dessus, il est fait mention d'un script nommé 'sign-file' (que l'on peut trouver dans le paquet kernel-devel) et qui permet de signer manuellement les modules.

Voir aussi la doc redhat en français: https://access.redhat.com/documentation/fr-fr/red_hat_enterprise_linux/7/html/system_administrators_guide/sect-signing-kernel-modules-for-secure-boot

Le "secure boot" se désactive dans allant de le bios.

pierrotlalune · 5 juil. 2018

nouvo09 wrote:
modprobe n'est pas bavard, il ne répond pas. Et en principe dans ce cas il a exécuté la commande.

A présent exécute un

lsmod | grep wl

pour voir si quelque chose a changé.

Voici:

$ lsmod | grep wl
wl                   6463488  0
cfg80211              770048  1 wl
$

pierrotlalune · 5 juil. 2018

Beta-Pictoris wrote:
Tu pourras vérifier quels paramètres sont activés en faisant ceci:
grep CONFIG_MODULE_SIG /boot/config-$(uname -r)
Si l'option 'CONFIG_MODULE_SIG_FORCE' n'est pas activée, on devrait juste avoir un message d'avertissement. Comme le message que tu as trouvé j'ai l'impression.

Voici:

$ grep CONFIG_MODULE_SIG /boot/config-$(uname -r)
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
CONFIG_MODULE_SIG_SHA256=y
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha256"
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
$

pierrotlalune · 5 juil. 2018

Bonjour à tous:-),
je crois que le plus productif serait que je fasse un rapport de bug afin que le prochain noyau soit pleinement fonctionnel. Qu'en pensez vous ?
Amicalement.
pll

nouvo09 · 5 juil. 2018

pierrotlalune wrote:
nouvo09 wrote:
modprobe n'est pas bavard, il ne répond pas. Et en principe dans ce cas il a exécuté la commande.

A présent exécute un

lsmod | grep wl

pour voir si quelque chose a changé.
Voici:
$ lsmod | grep wl
wl                   6463488  0
cfg80211              770048  1 wl
$ 

bien, apparemment ton module est chargé.

pierrotlalune · 5 juil. 2018

J'ai remarqué un bug similaire auquel j'ai apporté quelques notes.