Fedora-Fr - Communauté francophone Fedora - Linux

Communauté francophone des utilisateurs de la distribution Linux Fedora.

  

Dernière news : Représenter Fedora au Capitole du Libre 2019

#1 01/11/2015 14:36:34

Jules-Marie-84
Membre
Inscription : 28/10/2012
Messages : 296

[Résolu] Message d'erreur lors du boot

Bonjour à tous,
j'ai constaté ce message lors du boot de mon bestiau :

[FAILED] Failled tu start Load Kernel Modules.

En dehors de ça tout fonctionne normalement.
Petite précision, en fait je pense que ce message est là depuis longtemps, mais je n'avais jamais fait gaffe, et comme ça va vite... Je l'ai repéré car j'ai voulu faire une vidéo du démarrage pour montrer à un ami la vitesse, à machine égale entre ma Fedora et sa config sous Prout Seven. big_smile

J'ai donc fait un :

systemctl status systemd-modules-load.service

Voici le résultat :

● systemd-modules-load.service - Load Kernel Modules
   Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static; vendor preset: disabled)
   Active: failed (Result: exit-code) since dim. 2015-11-01 13:18:13 CET; 4min 27s ago
Condition: start condition failed at dim. 2015-11-01 13:18:31 CET; 4min 9s ago
           none of the trigger conditions were met
     Docs: man:systemd-modules-load.service(8)
           man:modules-load.d(5)
 Main PID: 154 (code=exited, status=1/FAILURE)

Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable.

Mais voilà, j'ai eu beau chercher je n'ai rien trouvé correspondant au numéro de problème (Main PID: 154 (code=exited, status=1/FAILURE))
Et j'avoue que je ne suis pas plus avancé car mes compétences s'arrêtent là pour le moment et butent donc obstinément sur mon ignorance dans ce domaine. sad

Qui parmi vous aurait la gentillesse de me dire de quoi il peut s'agir et comment corriger la chose clairement ?
Merci par avance pour vos lumières.
Belle journée à vous tous.


Jules-Marie-84

Fedora 30 Net-Install -  AMD FX 8350 - Gigabyte GA 970 gaming - 16Gb ram DDR3 1600 - Vidéo ATI 2 GiO - SSD Samsung M2 PCIe 250 GiO "système" - SSD Samsung Sata 3 1 To "datas"

Hors ligne

#2 03/11/2015 10:47:32

Jules-Marie-84
Membre
Inscription : 28/10/2012
Messages : 296

Re : [Résolu] Message d'erreur lors du boot

Bonjour à tous.
Un petit UP, quelqu’un aurait-il une suggestion SVP ?
Merci par avance.


Jules-Marie-84

Fedora 30 Net-Install -  AMD FX 8350 - Gigabyte GA 970 gaming - 16Gb ram DDR3 1600 - Vidéo ATI 2 GiO - SSD Samsung M2 PCIe 250 GiO "système" - SSD Samsung Sata 3 1 To "datas"

Hors ligne

#3 03/11/2015 20:02:18

Nicosss
Membre
Lieu : Isère
Inscription : 05/03/2007
Messages : 5 010
Site Web

Re : [Résolu] Message d'erreur lors du boot

Que retourne

$ rpm -qa kernel*
$ dmesg

Et que retrouves-tu dans les logs en utilisant la commande journactl.


F30_64 Gnome-Shell - GA-990FXA-UD3 - Phenom II X6 1100T - NH-D14 - Ati HD 5750 Fanless - 16Go RAM /&/ F30_64 Gnome-Shell - Toshiba Satellite C660D-19X - 8Go RAM
F30_64 - ASRock 960GC-GS FX - AMD FX(tm)-8300 - 16Go RAM

Hors ligne

#4 03/11/2015 20:48:33

Jules-Marie-84
Membre
Inscription : 28/10/2012
Messages : 296

Re : [Résolu] Message d'erreur lors du boot

Bonsoir Nicosss et merci pour ta réponse.
J'ai donc comme résultat au rpm -qa kernel :

$ rpm -qa kernel
kernel-4.1.8-100.fc21.x86_64
kernel-4.2.3-200.fc22.x86_64
kernel-4.1.7-100.fc21.x86_64

Je rappelle que c'est une évolution de Fedora 21 vers Fedora 22, on retrouve bien les kernels actuellement installé.

Pour les résultats à la commande dmesg la liste est très longue...

$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.2.3-200.fc22.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 5.1.1 20150618 (Red Hat 5.1.1-4) (GCC) ) #1 SMP Thu Oct 8 03:23:55 UTC 2015
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.2.3-200.fc22.x86_64 root=/dev/mapper/luks-4573246e-ad2b-402c-ae6d-ce27d322de05 ro rd.luks.uuid=luks-a65e136d-6f9e-4e63-9c5c-ff0c2897bfd8 rd.luks.uuid=luks-4573246e-ad2b-402c-ae6d-ce27d322de05 rhgb quiet LANG=fr_FR.UTF-8
[    0.000000] tseg: 00bff00000
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfeeffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfef0000-0x00000000bfef2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfef3000-0x00000000bfefffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. M56S-S3/GA-M56S-S3, BIOS F6h 08/20/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-CFFFF uncachable
[    0.000000]   D0000-D3FFF write-back
[    0.000000]   D4000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000BFF00000 mask FFFFFFF00000 uncachable
[    0.000000]   3 base 000100000000 mask FFFFC0000000 write-back
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000140000000 aka 5120M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbfef0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f4c30-0x000f4c3f] mapped at [ffff8800000f4c30]
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x02043000, 0x02043fff] PGTABLE
[    0.000000] BRK [0x02044000, 0x02044fff] PGTABLE
[    0.000000] BRK [0x02045000, 0x02045fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[    0.000000]  [mem 0x13fe00000-0x13fffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x120000000-0x13fdfffff]
[    0.000000]  [mem 0x120000000-0x13fdfffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbfeeffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xbfdfffff] page 2M
[    0.000000]  [mem 0xbfe00000-0xbfeeffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff]
[    0.000000]  [mem 0x100000000-0x11fffffff] page 1G
[    0.000000] RAMDISK: [mem 0x355b6000-0x36ad2fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6600 000014 (v00 GBT   )
[    0.000000] ACPI: RSDT 0x00000000BFEF3000 000038 (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
[    0.000000] ACPI: FACP 0x00000000BFEF3040 000074 (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
[    0.000000] ACPI: DSDT 0x00000000BFEF30C0 0047C1 (v01 GBT    NVDAACPI 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 0x00000000BFEF0000 000040
[    0.000000] ACPI: SSDT 0x00000000BFEF79C0 000544 (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[    0.000000] ACPI: HPET 0x00000000BFEF7F40 000038 (v01 GBT    NVDAACPI 42302E31 NVDA 00000098)
[    0.000000] ACPI: MCFG 0x00000000BFEF7F80 00003C (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
[    0.000000] ACPI: APIC 0x00000000BFEF78C0 0000C6 (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13ffea000-0x13fffdfff]
[    0.000000]  [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bfeeffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.000000] On node 0 totalpages: 1048204
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12220 pages used for memmap
[    0.000000]   DMA32 zone: 782064 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10dea201 base: 0xfeff0000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfef0000-0xbfef2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfef3000-0xbfefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbff00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe8000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[    0.000000] e820: [mem 0xbff00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88013fc00000 s97048 r8192 d29928 u262144
[    0.000000] pcpu-alloc: s97048 r8192 d29928 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031803
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.3-200.fc22.x86_64 root=/dev/mapper/luks-4573246e-ad2b-402c-ae6d-ce27d322de05 ro rd.luks.uuid=luks-a65e136d-6f9e-4e63-9c5c-ff0c2897bfd8 rd.luks.uuid=luks-4573246e-ad2b-402c-ae6d-ce27d322de05 rhgb quiet LANG=fr_FR.UTF-8
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Memory: 4021456K/4192816K available (7670K kernel code, 1264K rwdata, 3336K rodata, 1512K init, 1544K bss, 171360K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:65792 nr_irqs:488 16
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-7.
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2310.362 MHz processor
[    0.000045] Calibrating delay loop (skipped), value calculated using timer frequency.. 4620.72 BogoMIPS (lpj=2310362)
[    0.000048] pid_max: default: 32768 minimum: 301
[    0.000057] ACPI: Core revision 20150619
[    0.003950] ACPI: All ACPI Tables successfully acquired
[    0.003979] Security Framework initialized
[    0.003982] SELinux:  Initializing.
[    0.003992] SELinux:  Starting in permissive mode
[    0.003993] Yama: becoming mindful.
[    0.004451] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.006028] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.006750] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.006757] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.007058] Initializing cgroup subsys blkio
[    0.007063] Initializing cgroup subsys memory
[    0.007073] Initializing cgroup subsys devices
[    0.007076] Initializing cgroup subsys freezer
[    0.007079] Initializing cgroup subsys net_cls
[    0.007082] Initializing cgroup subsys perf_event
[    0.007086] Initializing cgroup subsys net_prio
[    0.007089] Initializing cgroup subsys hugetlb
[    0.007114] CPU: Physical Processor ID: 0
[    0.007116] CPU: Processor Core ID: 0
[    0.007118] mce: CPU supports 6 MCE banks
[    0.007124] LVT offset 0 assigned for vector 0xf9
[    0.007129] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[    0.007131] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[    0.007254] Freeing SMP alternatives memory: 28K (ffffffff81eb8000 - ffffffff81ebf000)
[    0.009665] ftrace: allocating 28731 entries in 113 pages
[    0.024240] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.135300] smpboot: CPU0: AMD Phenom(tm) 9650 Quad-Core Processor (fam: 10, model: 02, stepping: 03)
[    0.135327] Performance Events: AMD PMU driver.
[    0.135332] ... version:                0
[    0.135333] ... bit width:              48
[    0.135335] ... generic registers:      4
[    0.135336] ... value mask:             0000ffffffffffff
[    0.135337] ... max period:             00007fffffffffff
[    0.135338] ... fixed-purpose events:   0
[    0.135339] ... event mask:             000000000000000f
[    0.136121] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.136247] x86: Booting SMP configuration:
[    0.136249] .... node  #0, CPUs:      #1 #2 #3
[    0.145887] x86: Booted up 1 node, 4 CPUs
[    0.145890] smpboot: Total of 4 processors activated (18482.89 BogoMIPS)
[    0.148454] devtmpfs: initialized
[    0.152486] PM: Registering ACPI NVS region [mem 0xbfef0000-0xbfef2fff] (12288 bytes)
[    0.152579] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.152683] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.152686] pinctrl core: initialized pinctrl subsystem
[    0.152742] RTC time:  8:38:31, date: 11/03/15
[    0.154371] NET: Registered protocol family 16
[    0.156411] cpuidle: using governor menu
[    0.156417] node 0 link 0: io port [9000, ffff]
[    0.156420] TOM: 00000000c0000000 aka 3072M
[    0.156422] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
[    0.156425] node 0 link 0: mmio [a0000, bffff]
[    0.156427] node 0 link 0: mmio [c0000000, dfffffff]
[    0.156429] node 0 link 0: mmio [e8000000, fe02ffff]
[    0.156431] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
[    0.156434] TOM2: 0000000140000000 aka 5120M
[    0.156436] bus: [bus 00-03] on node 0 link 0
[    0.156438] bus: 00 [io  0x0000-0xffff]
[    0.156439] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.156440] bus: 00 [mem 0xc0000000-0xdfffffff]
[    0.156442] bus: 00 [mem 0xe0400000-0xffffffff]
[    0.156443] bus: 00 [mem 0xe0100000-0xe03fffff]
[    0.156444] bus: 00 [mem 0x140000000-0xfcffffffff]
[    0.156562] ACPI: bus type PCI registered
[    0.156565] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.156646] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.156649] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.156652] PCI: MMCONFIG for 0000 [bus00-7f] at [mem 0xe0000000-0xe7ffffff] (base 0xe0000000) (size reduced!)
[    0.156665] PCI: Using configuration type 1 for base access
[    0.160717] ACPI: Added _OSI(Module Device)
[    0.160719] ACPI: Added _OSI(Processor Device)
[    0.160720] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.160722] ACPI: Added _OSI(Processor Aggregator Device)
[    0.165375] ACPI: Interpreter enabled
[    0.165384] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[    0.165389] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[    0.165403] ACPI: (supports S0 S3 S4 S5)
[    0.165405] ACPI: Using IOAPIC for interrupt routing
[    0.165428] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.172190] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.172197] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.172202] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.172251] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
[    0.172430] PCI host bridge to bus 0000:00
[    0.172433] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.172436] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.172439] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.172441] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.172443] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.172445] pci_bus 0000:00: root bus resource [mem 0xbff00000-0xfebfffff window]
[    0.172464] pci 0000:00:00.0: [10de:0444] type 00 class 0x050000
[    0.172679] pci 0000:00:01.0: [10de:0441] type 00 class 0x060100
[    0.172789] pci 0000:00:01.1: [10de:0446] type 00 class 0x0c0500
[    0.172804] pci 0000:00:01.1: reg 0x10: [io  0xfc00-0xfc3f]
[    0.172819] pci 0000:00:01.1: reg 0x20: [io  0x1c00-0x1c3f]
[    0.172825] pci 0000:00:01.1: reg 0x24: [io  0x1c40-0x1c7f]
[    0.172844] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.172927] pci 0000:00:01.2: [10de:0445] type 00 class 0x050000
[    0.173027] pci 0000:00:02.0: [10de:0454] type 00 class 0x0c0310
[    0.173039] pci 0000:00:02.0: reg 0x10: [mem 0xfe02f000-0xfe02ffff]
[    0.173069] pci 0000:00:02.0: supports D1 D2
[    0.173071] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.173119] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.173163] pci 0000:00:02.1: [10de:0455] type 00 class 0x0c0320
[    0.173176] pci 0000:00:02.1: reg 0x10: [mem 0xfe02e000-0xfe02e0ff]
[    0.173209] pci 0000:00:02.1: supports D1 D2
[    0.173211] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.173272] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.173325] pci 0000:00:06.0: [10de:0450] type 00 class 0x020000
[    0.173339] pci 0000:00:06.0: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
[    0.173343] pci 0000:00:06.0: reg 0x14: [io  0xf000-0xf007]
[    0.173369] pci 0000:00:06.0: supports D1 D2
[    0.173371] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.173420] pci 0000:00:06.0: System wakeup disabled by ACPI
[    0.173465] pci 0000:00:07.0: [10de:044a] type 00 class 0x040300
[    0.173480] pci 0000:00:07.0: reg 0x10: [mem 0xfe024000-0xfe027fff]
[    0.173513] pci 0000:00:07.0: PME# supported from D3hot D3cold
[    0.173561] pci 0000:00:07.0: System wakeup disabled by ACPI
[    0.173607] pci 0000:00:08.0: [10de:0449] type 01 class 0x060401
[    0.173679] pci 0000:00:08.0: System wakeup disabled by ACPI
[    0.173719] pci 0000:00:09.0: [10de:0448] type 00 class 0x01018a
[    0.173743] pci 0000:00:09.0: reg 0x20: [io  0xec00-0xec0f]
[    0.173753] pci 0000:00:09.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.173755] pci 0000:00:09.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.173757] pci 0000:00:09.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.173758] pci 0000:00:09.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.173845] pci 0000:00:0a.0: [10de:044d] type 00 class 0x010601
[    0.173856] pci 0000:00:0a.0: reg 0x10: [io  0x09f0-0x09f7]
[    0.173860] pci 0000:00:0a.0: reg 0x14: [io  0x0bf0-0x0bf3]
[    0.173864] pci 0000:00:0a.0: reg 0x18: [io  0x0970-0x0977]
[    0.173868] pci 0000:00:0a.0: reg 0x1c: [io  0x0b70-0x0b73]
[    0.173872] pci 0000:00:0a.0: reg 0x20: [io  0xd800-0xd80f]
[    0.173877] pci 0000:00:0a.0: reg 0x24: [mem 0xfe02a000-0xfe02bfff]
[    0.173972] pci 0000:00:0c.0: [10de:045a] type 01 class 0x060400
[    0.173999] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.174065] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.174107] pci 0000:00:0d.0: [10de:0458] type 01 class 0x060400
[    0.174133] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.174194] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.174248] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.174339] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.174414] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.174494] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.174576] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.174707] pci 0000:01:0e.0: [104c:8024] type 00 class 0x0c0010
[    0.174725] pci 0000:01:0e.0: reg 0x10: [mem 0xfdeff000-0xfdeff7ff]
[    0.174733] pci 0000:01:0e.0: reg 0x14: [mem 0xfdef8000-0xfdefbfff]
[    0.174778] pci 0000:01:0e.0: supports D1 D2
[    0.174780] pci 0000:01:0e.0: PME# supported from D0 D1 D2 D3hot
[    0.174835] pci 0000:00:08.0: PCI bridge to [bus 01] (subtractive decode)
[    0.174838] pci 0000:00:08.0:   bridge window [io  0xc000-0xcfff]
[    0.174841] pci 0000:00:08.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.174845] pci 0000:00:08.0:   bridge window [mem 0xfdf00000-0xfdffffff pref]
[    0.174847] pci 0000:00:08.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.174849] pci 0000:00:08.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.174852] pci 0000:00:08.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.174854] pci 0000:00:08.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.174856] pci 0000:00:08.0:   bridge window [mem 0xbff00000-0xfebfffff window] (subtractive decode)
[    0.174900] pci 0000:02:00.0: [1b21:0612] type 00 class 0x010601
[    0.174926] pci 0000:02:00.0: reg 0x10: [io  0xbc00-0xbc07]
[    0.174935] pci 0000:02:00.0: reg 0x14: [io  0xb800-0xb803]
[    0.174945] pci 0000:02:00.0: reg 0x18: [io  0xb400-0xb407]
[    0.174954] pci 0000:02:00.0: reg 0x1c: [io  0xb000-0xb003]
[    0.174963] pci 0000:02:00.0: reg 0x20: [io  0xac00-0xac1f]
[    0.174973] pci 0000:02:00.0: reg 0x24: [mem 0xfddff000-0xfddff1ff]
[    0.174983] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.176302] pci 0000:00:0c.0: PCI bridge to [bus 02]
[    0.176306] pci 0000:00:0c.0:   bridge window [io  0xa000-0xbfff]
[    0.176309] pci 0000:00:0c.0:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.176312] pci 0000:00:0c.0:   bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    0.176349] pci 0000:03:00.0: [1002:68f9] type 00 class 0x030000
[    0.176368] pci 0000:03:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.176376] pci 0000:03:00.0: reg 0x18: [mem 0xfdbc0000-0xfdbdffff 64bit]
[    0.176382] pci 0000:03:00.0: reg 0x20: [io  0x9c00-0x9cff]
[    0.176393] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.176412] pci 0000:03:00.0: supports D1 D2
[    0.176455] pci 0000:03:00.1: [1002:aa68] type 00 class 0x040300
[    0.176474] pci 0000:03:00.1: reg 0x10: [mem 0xfdbfc000-0xfdbfffff 64bit]
[    0.176512] pci 0000:03:00.1: supports D1 D2
[    0.178297] pci 0000:00:0d.0: PCI bridge to [bus 03]
[    0.178300] pci 0000:00:0d.0:   bridge window [io  0x9000-0x9fff]
[    0.178303] pci 0000:00:0d.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
[    0.178306] pci 0000:00:0d.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.178318] pci_bus 0000:00: on NUMA node 0
[    0.178923] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 *11 14 15)
[    0.178978] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
[    0.179027] ACPI: PCI Interrupt Link [LNK3] (IRQs *5 7 9 10 11 14 15)
[    0.179080] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.179134] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.179184] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.179232] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.179288] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.179338] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.179389] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
[    0.179440] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
[    0.179494] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.179550] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.179598] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
[    0.179651] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[    0.179701] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.179751] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
[    0.179801] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.179852] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
[    0.179945] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[    0.180024] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[    0.180110] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[    0.180184] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[    0.180266] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[    0.180349] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[    0.180422] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[    0.180501] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[    0.180589] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0, disabled.
[    0.180673] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0, disabled.
[    0.180754] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0, disabled.
[    0.180847] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0, disabled.
[    0.180926] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[    0.181011] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[    0.181095] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
[    0.181178] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[    0.181263] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[    0.181346] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[    0.181427] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[    0.181628] vgaarb: setting as boot device: PCI:0000:03:00.0
[    0.181631] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.181632] vgaarb: loaded
[    0.181634] vgaarb: bridge control possible 0000:03:00.0
[    0.181746] SCSI subsystem initialized
[    0.181798] libata version 3.00 loaded.
[    0.181832] ACPI: bus type USB registered
[    0.181852] usbcore: registered new interface driver usbfs
[    0.181864] usbcore: registered new interface driver hub
[    0.181887] usbcore: registered new device driver usb
[    0.182015] PCI: Using ACPI for IRQ routing
[    0.185050] PCI: pci_cache_line_size set to 64 bytes
[    0.185087] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[    0.185089] e820: reserve RAM buffer [mem 0xbfef0000-0xbfffffff]
[    0.185226] NetLabel: Initializing
[    0.185227] NetLabel:  domain hash size = 128
[    0.185228] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.185242] NetLabel:  unlabeled traffic allowed by default
[    0.185323] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.185329] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[    0.185332] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.187595] clocksource: Switched to clocksource hpet
[    0.197111] pnp: PnP ACPI init
[    0.197305] system 00:00: [io  0x1000-0x107f] has been reserved
[    0.197308] system 00:00: [io  0x1080-0x10ff] has been reserved
[    0.197310] system 00:00: [io  0x1400-0x147f] has been reserved
[    0.197312] system 00:00: [io  0x1480-0x14ff] has been reserved
[    0.197315] system 00:00: [io  0x1800-0x187f] has been reserved
[    0.197317] system 00:00: [io  0x1880-0x18ff] has been reserved
[    0.197322] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.197411] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.197414] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.197416] system 00:01: [io  0x0295-0x0314] has been reserved
[    0.197418] system 00:01: [io  0x0290-0x0294] has been reserved
[    0.197421] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.197492] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.197833] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.198164] pnp 00:04: [dma 3]
[    0.198210] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.198767] system 00:05: [mem 0xe0000000-0xe7ffffff] has been reserved
[    0.198770] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.198944] system 00:06: [mem 0x000d0000-0x000d3fff] has been reserved
[    0.198947] system 00:06: [mem 0x000dbe00-0x000dbfff] has been reserved
[    0.198949] system 00:06: [mem 0x000f0000-0x000fbfff] could not be reserved
[    0.198952] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.198954] system 00:06: [mem 0xbfef0000-0xbfefffff] could not be reserved
[    0.198956] system 00:06: [mem 0xffff0000-0xffffffff] has been reserved
[    0.198959] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.198961] system 00:06: [mem 0x00100000-0xbfeeffff] could not be reserved
[    0.198963] system 00:06: [mem 0xbff00000-0xbfffffff] has been reserved
[    0.198966] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.198968] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.198971] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.198986] pnp: PnP ACPI: found 7 devices
[    0.205990] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.206011] pci 0000:00:08.0: PCI bridge to [bus 01]
[    0.206015] pci 0000:00:08.0:   bridge window [io  0xc000-0xcfff]
[    0.206019] pci 0000:00:08.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.206022] pci 0000:00:08.0:   bridge window [mem 0xfdf00000-0xfdffffff pref]
[    0.206030] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd0ffff pref]
[    0.206033] pci 0000:00:0c.0: PCI bridge to [bus 02]
[    0.206035] pci 0000:00:0c.0:   bridge window [io  0xa000-0xbfff]
[    0.206038] pci 0000:00:0c.0:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.206041] pci 0000:00:0c.0:   bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    0.206046] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb1ffff pref]
[    0.206048] pci 0000:00:0d.0: PCI bridge to [bus 03]
[    0.206050] pci 0000:00:0d.0:   bridge window [io  0x9000-0x9fff]
[    0.206053] pci 0000:00:0d.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
[    0.206056] pci 0000:00:0d.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.206060] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.206062] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.206064] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.206067] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.206069] pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff window]
[    0.206071] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.206073] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.206075] pci_bus 0000:01: resource 2 [mem 0xfdf00000-0xfdffffff pref]
[    0.206077] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7 window]
[    0.206079] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff window]
[    0.206081] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.206083] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.206085] pci_bus 0000:01: resource 8 [mem 0xbff00000-0xfebfffff window]
[    0.206088] pci_bus 0000:02: resource 0 [io  0xa000-0xbfff]
[    0.206090] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[    0.206092] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    0.206094] pci_bus 0000:03: resource 0 [io  0x9000-0x9fff]
[    0.206096] pci_bus 0000:03: resource 1 [mem 0xfdb00000-0xfdbfffff]
[    0.206098] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.206145] NET: Registered protocol family 2
[    0.206385] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.206526] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.206715] TCP: Hash tables configured (established 32768 bind 32768)
[    0.206772] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.206804] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.206894] NET: Registered protocol family 1
[    0.207169] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
[    0.282829] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22
[    0.282948] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.282992] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.283037] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.283088] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.283140] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.283193] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.283211] pci 0000:03:00.0: Video device with shadowed ROM
[    0.283215] PCI: CLS 4 bytes, default 64
[    0.283295] Unpacking initramfs...
[    0.660570] Freeing initrd memory: 21620K (ffff8800355b6000 - ffff880036ad3000)
[    0.660583] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.660586] software IO TLB [mem 0xbbef0000-0xbfef0000] (64MB) mapped at [ffff8800bbef0000-ffff8800bfeeffff]
[    0.660765] microcode: CPU0: patch_level=0x010000c9
[    0.660774] microcode: CPU1: patch_level=0x010000c9
[    0.660784] microcode: CPU2: patch_level=0x010000c9
[    0.660796] microcode: CPU3: patch_level=0x010000c9
[    0.660868] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.660873] LVT offset 1 assigned for vector 0x400
[    0.660884] IBS: LVT offset 1 assigned
[    0.660906] perf: AMD IBS detected (0x00000007)
[    0.661821] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.661861] Initialise system trusted keyring
[    0.661893] audit: initializing netlink subsys (disabled)
[    0.661922] audit: type=2000 audit(1446539911.552:1): initialized
[    0.662311] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.664135] zpool: loaded
[    0.664138] zbud: loaded
[    0.664369] VFS: Disk quotas dquot_6.6.0
[    0.664428] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.664922] Key type big_key registered
[    0.664925] SELinux:  Registering netfilter hooks
[    0.671614] NET: Registered protocol family 38
[    0.671631] Key type asymmetric registered
[    0.671635] Asymmetric key parser 'x509' registered
[    0.671670] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.671740] io scheduler noop registered
[    0.671743] io scheduler deadline registered
[    0.671822] io scheduler cfq registered (default)
[    0.672099] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.672108] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.672227] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.672232] ACPI: Power Button [PWRB]
[    0.672285] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.672290] ACPI: Power Button [PWRF]
[    0.672553] GHES: HEST is not enabled!
[    0.672639] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.693138] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.693741] Non-volatile memory driver v1.3
[    0.693781] Linux agpgart interface v0.103
[    0.694439] ahci 0000:00:0a.0: version 3.0
[    0.694678] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[    0.694713] ahci 0000:00:0a.0: controller can't do PMP, turning off CAP_PMP
[    0.694770] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    0.694774] ahci 0000:00:0a.0: flags: 64bit ncq sntf pm led clo pio slum part 
[    0.695436] scsi host0: ahci
[    0.695587] scsi host1: ahci
[    0.695713] scsi host2: ahci
[    0.695842] scsi host3: ahci
[    0.695891] ata1: SATA max UDMA/133 abar m8192@0xfe02a000 port 0xfe02a100 irq 26
[    0.695893] ata2: SATA max UDMA/133 abar m8192@0xfe02a000 port 0xfe02a180 irq 26
[    0.695895] ata3: SATA max UDMA/133 abar m8192@0xfe02a000 port 0xfe02a200 irq 26
[    0.695897] ata4: SATA max UDMA/133 abar m8192@0xfe02a000 port 0xfe02a280 irq 26
[    0.696167] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[    0.696243] ahci 0000:02:00.0: SSS flag set, parallel bus scan disabled
[    0.696271] ahci 0000:02:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    0.696275] ahci 0000:02:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
[    0.696662] scsi host4: ahci
[    0.696771] scsi host5: ahci
[    0.696824] ata5: SATA max UDMA/133 abar m512@0xfddff000 port 0xfddff100 irq 27
[    0.696827] ata6: SATA max UDMA/133 abar m512@0xfddff000 port 0xfddff180 irq 27
[    0.696933] libphy: Fixed MDIO Bus: probed
[    0.697027] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.697033] ehci-pci: EHCI PCI platform driver
[    0.697183] ehci-pci 0000:00:02.1: EHCI Host Controller
[    0.697229] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    0.697238] ehci-pci 0000:00:02.1: debug port 1
[    0.697268] ehci-pci 0000:00:02.1: cache line size of 4 is not supported
[    0.697287] ehci-pci 0000:00:02.1: irq 22, io mem 0xfe02e000
[    0.702397] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    0.702464] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.702466] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.702468] usb usb1: Product: EHCI Host Controller
[    0.702470] usb usb1: Manufacturer: Linux 4.2.3-200.fc22.x86_64 ehci_hcd
[    0.702472] usb usb1: SerialNumber: 0000:00:02.1
[    0.702599] hub 1-0:1.0: USB hub found
[    0.702606] hub 1-0:1.0: 10 ports detected
[    0.702838] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.702844] ohci-pci: OHCI PCI platform driver
[    0.702962] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    0.703009] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    0.703039] ohci-pci 0000:00:02.0: irq 23, io mem 0xfe02f000
[    0.755412] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.755419] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.755421] usb usb2: Product: OHCI PCI host controller
[    0.755423] usb usb2: Manufacturer: Linux 4.2.3-200.fc22.x86_64 ohci_hcd
[    0.755425] usb usb2: SerialNumber: 0000:00:02.0
[    0.755581] hub 2-0:1.0: USB hub found
[    0.755591] hub 2-0:1.0: 10 ports detected
[    0.755831] uhci_hcd: USB Universal Host Controller Interface driver
[    0.755917] usbcore: registered new interface driver usbserial
[    0.755925] usbcore: registered new interface driver usbserial_generic
[    0.755933] usbserial: USB Serial support registered for generic
[    0.755976] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.756461] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.756466] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.756598] mousedev: PS/2 mouse device common for all mice
[    0.756836] rtc_cmos 00:02: RTC can wake from S4
[    0.757006] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.757045] rtc_cmos 00:02: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.757135] device-mapper: uevent: version 1.0.3
[    0.757215] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[    0.757616] hidraw: raw HID events driver (C) Jiri Kosina
[    0.757670] usbcore: registered new interface driver usbhid
[    0.757672] usbhid: USB HID core driver
[    0.757783] drop_monitor: Initializing network drop monitor service
[    0.757877] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.757928] Initializing XFRM netlink socket
[    0.758061] NET: Registered protocol family 10
[    0.758302] mip6: Mobile IPv6
[    0.758306] NET: Registered protocol family 17
[    0.758828] Loading compiled-in X.509 certificates
[    0.760162] Loaded X.509 cert 'Fedora kernel signing key: 6b3269bbf8479701c80315fb5f368af9245207be'
[    0.760186] registered taskstats version 1
[    0.760208] zswap: loading zswap
[    0.760210] zswap: using zbud pool
[    0.760218] zswap: using lzo compressor
[    0.760573]   Magic number: 7:682:623
[    0.760687] rtc_cmos 00:02: setting system clock to 2015-11-03 08:38:31 UTC (1446539911)
[    0.760750] PM: Hibernation image not present or could not be loaded.
[    1.000257] ata2: SATA link down (SStatus 0 SControl 300)
[    1.000273] ata4: SATA link down (SStatus 0 SControl 300)
[    1.000290] ata1: SATA link down (SStatus 0 SControl 300)
[    1.000311] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.001381] ata3.00: ATAPI: Optiarc DVD RW AD-7201S, 1.09, max UDMA/100
[    1.002744] ata3.00: configured for UDMA/100
[    1.004832] scsi 2:0:0:0: CD-ROM            Optiarc  DVD RW AD-7201S  1.09 PQ: 0 ANSI: 5
[    1.027855] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.027858] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.028008] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.028087] sr 2:0:0:0: Attached scsi generic sg0 type 5
[    1.106203] usb 1-8: new high-speed USB device number 4 using ehci-pci
[    1.156192] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.156473] ata5.00: ATA-9: SanDisk SDSSDP128G, 2.0.0, max UDMA/133
[    1.156475] ata5.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    1.156679] ata5.00: configured for UDMA/133
[    1.156815] scsi 4:0:0:0: Direct-Access     ATA      SanDisk SDSSDP12 0    PQ: 0 ANSI: 5
[    1.157043] sd 4:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    1.157087] sd 4:0:0:0: [sda] Write Protect is off
[    1.157090] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.157091] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    1.157107] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.157642]  sda: sda1 sda2 sda3
[    1.157989] sd 4:0:0:0: [sda] Attached SCSI disk
[    1.215155] usb 2-1: new low-speed USB device number 2 using ohci-pci
[    1.223323] usb 1-8: New USB device found, idVendor=058f, idProduct=6362
[    1.223325] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.223327] usb 1-8: Product: Mass Storage Device
[    1.223329] usb 1-8: Manufacturer: Generic
[    1.223331] usb 1-8: SerialNumber: 058F312D8Ae
[    1.402086] usb 2-1: New USB device found, idVendor=04f2, idProduct=0909
[    1.402089] usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.402091] usb 2-1: Product: USB Optical Mouse
[    1.412423] input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/0003:04F2:0909.0001/input/input5
[    1.412564] hid-generic 0003:04F2:0909.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:02.0-1/input0
[    1.568989] usb 2-2: new low-speed USB device number 3 using ohci-pci
[    1.616978] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.617441] ata6.00: ATA-8: WDC WD5000HHTZ-04N21V0, 04.06A00, max UDMA/133
[    1.617444] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.617919] ata6.00: configured for UDMA/133
[    1.618031] scsi 5:0:0:0: Direct-Access     ATA      WDC WD5000HHTZ-0 6A00 PQ: 0 ANSI: 5
[    1.618220] sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.618222] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[    1.618251] sd 5:0:0:0: [sdb] Write Protect is off
[    1.618253] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.618256] sd 5:0:0:0: Attached scsi generic sg2 type 0
[    1.618268] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.631868]  sdb: sdb1 sdb2 sdb3
[    1.632199] sd 5:0:0:0: [sdb] Attached SCSI disk
[    1.632830] Freeing unused kernel memory: 1512K (ffffffff81d3e000 - ffffffff81eb8000)
[    1.632834] Write protecting the kernel read-only data: 12288k
[    1.633257] Freeing unused kernel memory: 512K (ffff880001780000 - ffff880001800000)
[    1.633616] Freeing unused kernel memory: 760K (ffff880001b42000 - ffff880001c00000)
[    1.636325] random: systemd urandom read with 19 bits of entropy available
[    1.637320] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    1.637536] systemd[1]: Detected architecture x86-64.
[    1.637539] systemd[1]: Running in initial RAM disk.
[    1.637568] systemd[1]: Set hostname to <localhost.localdomain>.
[    1.661958] tsc: Refined TSC clocksource calibration: 2310.478 MHz
[    1.661964] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x214ddf4c036, max_idle_ns: 440795302900 ns
[    1.682763] systemd[1]: Created slice -.slice.
[    1.682779] systemd[1]: Starting -.slice.
[    1.682827] systemd[1]: Listening on udev Kernel Socket.
[    1.682836] systemd[1]: Starting udev Kernel Socket.
[    1.682886] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.682894] systemd[1]: Starting Journal Socket (/dev/log).
[    1.682914] systemd[1]: Reached target Swap.
[    1.682938] systemd[1]: Starting Swap.
[    1.682975] systemd[1]: Listening on udev Control Socket.
[    1.682984] systemd[1]: Starting udev Control Socket.
[    1.683101] systemd[1]: Listening on Journal Audit Socket.
[    1.683110] systemd[1]: Starting Journal Audit Socket.
[    1.683153] systemd[1]: Listening on Journal Socket.
[    1.683163] systemd[1]: Starting Journal Socket.
[    1.683187] systemd[1]: Reached target Sockets.
[    1.683194] systemd[1]: Starting Sockets.
[    1.683282] systemd[1]: Created slice System Slice.
[    1.683291] systemd[1]: Starting System Slice.
[    1.683385] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[    1.683394] systemd[1]: Starting system-systemd\x2dcryptsetup.slice.
[    1.684134] systemd[1]: Starting Load Kernel Modules...
[    1.684170] systemd[1]: Reached target Slices.
[    1.684182] systemd[1]: Starting Slices.
[    1.684897] systemd[1]: Starting Setup Virtual Console...
[    1.684983] systemd[1]: Started dracut ask for additional cmdline parameters.
[    1.685861] systemd[1]: Starting dracut cmdline hook...
[    1.686745] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    1.686791] systemd[1]: Reached target Timers.
[    1.686813] systemd[1]: Starting Timers.
[    1.686833] systemd[1]: Reached target Local File Systems.
[    1.686845] systemd[1]: Starting Local File Systems.
[    1.687579] systemd[1]: Starting Journal Service...
[    1.689436] systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
[    1.693226] systemd[1]: Failed to start Load Kernel Modules.
[    1.693272] systemd[1]: Unit systemd-modules-load.service entered failed state.
[    1.693381] audit: type=1130 audit(1446539912.432:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[    1.693407] systemd[1]: systemd-modules-load.service failed.
[    1.693864] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    1.693892] audit: type=1130 audit(1446539912.432:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.697090] systemd[1]: Starting Create Static Device Nodes in /dev...
[    1.700459] systemd[1]: Starting Apply Kernel Variables...
[    1.702644] systemd[1]: Started Create Static Device Nodes in /dev.
[    1.702712] audit: type=1130 audit(1446539912.441:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.705864] systemd[1]: Started Apply Kernel Variables.
[    1.705911] audit: type=1130 audit(1446539912.444:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.721209] systemd[1]: Started Journal Service.
[    1.721302] audit: type=1130 audit(1446539912.460:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.773928] usb 2-2: New USB device found, idVendor=04f2, idProduct=0408
[    1.773934] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.773937] usb 2-2: Product: USB Keyboard
[    1.773939] usb 2-2: Manufacturer: Chicony
[    1.789278] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/0003:04F2:0408.0002/input/input6
[    1.799970] audit: type=1130 audit(1446539912.539:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.804398] audit: type=1130 audit(1446539912.543:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.840093] hid-generic 0003:04F2:0408.0002: input,hidraw1: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:02.0-2/input0
[    1.842923] audit: type=1130 audit(1446539912.582:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.848675] audit: type=1130 audit(1446539912.587:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.868983] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/0003:04F2:0408.0003/input/input7
[    1.905219] pata_amd 0000:00:09.0: version 0.4.1
[    1.910917] scsi host6: pata_amd
[    1.911138] scsi host7: pata_amd
[    1.911224] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xec00 irq 14
[    1.911227] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xec08 irq 15
[    1.911267] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.911523] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
[    1.920039] hid-generic 0003:04F2:0408.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:02.0-2/input1
[    1.923189] usb-storage 1-8:1.0: USB Mass Storage device detected
[    1.924454] scsi host8: usb-storage 1-8:1.0
[    1.924571] usbcore: registered new interface driver usb-storage
[    1.928496] usbcore: registered new interface driver uas
[    1.929282] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[    1.946134] [drm] Initialized drm 1.1.0 20060810
[    1.979849] firewire_ohci 0000:01:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    2.062056] [drm] radeon kernel modesetting enabled.
[    2.072897] ata8: port disabled--ignoring
[    2.072930] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    2.072937] AMD IOMMUv2 functionality not available on this system
[    2.083302] CRAT table not found
[    2.083306] Finished initializing topology ret=0
[    2.083393] kfd kfd: Initialized module
[    2.084110] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
[    2.084328] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1043:0x0473).
[    2.084343] [drm] register mmio base: 0xFDBC0000
[    2.084345] [drm] register mmio size: 131072
[    2.084765] ATOM BIOS: 68F9.12.20.0.64.AS02
[    2.084834] radeon 0000:03:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[    2.084837] radeon 0000:03:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[    2.084839] [drm] Detected VRAM RAM=2048M, BAR=256M
[    2.084841] [drm] RAM width 64bits DDR
[    2.084913] [TTM] Zone  kernel: Available graphics memory: 2022944 kiB
[    2.084917] [TTM] Initializing pool allocator
[    2.084925] [TTM] Initializing DMA pool allocator
[    2.084954] [drm] radeon: 2048M of VRAM memory ready
[    2.084955] [drm] radeon: 1024M of GTT memory ready.
[    2.084983] [drm] Loading CEDAR Microcode
[    2.085088] [drm] Internal thermal controller without fan control
[    2.102668] [drm] radeon: dpm initialized
[    2.102796] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    2.121692] [drm] PCIE GART of 1024M enabled (table at 0x000000000025E000).
[    2.121799] radeon 0000:03:00.0: WB enabled
[    2.121803] radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880035689c00
[    2.121806] radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880035689c0c
[    2.122543] radeon 0000:03:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc90000c1c418
[    2.122546] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.122547] [drm] Driver supports precise vblank timestamp query.
[    2.122549] radeon 0000:03:00.0: radeon: MSI limited to 32-bit
[    2.122587] radeon 0000:03:00.0: radeon: using MSI.
[    2.122615] [drm] radeon: irq initialized.
[    2.139267] [drm] ring test on 0 succeeded in 1 usecs
[    2.139276] [drm] ring test on 3 succeeded in 2 usecs
[    2.181723] usb 2-10: new full-speed USB device number 4 using ohci-pci
[    2.326430] [drm] ring test on 5 succeeded in 1 usecs
[    2.326435] [drm] UVD initialized successfully.
[    2.326974] [drm] ib test on ring 0 succeeded in 0 usecs
[    2.327009] [drm] ib test on ring 3 succeeded in 0 usecs
[    2.373653] usb 2-10: New USB device found, idVendor=0ac8, idProduct=303b
[    2.373657] usb 2-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.373659] usb 2-10: Product: PC Camera
[    2.373661] usb 2-10: Manufacturer: Vimicro Corp.
[    2.433518] forcedeth 0000:00:06.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1f:d0:69:b1:72
[    2.433523] forcedeth 0000:00:06.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[    2.436366] forcedeth 0000:00:06.0 enp0s6: renamed from eth0
[    2.446626] 8021q: 802.1Q VLAN Support v1.8
[    2.498252] firewire_core 0000:01:0e.0: created device fw0: GUID 00ece5b200001d7d, S400
[    2.661593] clocksource: Switched to clocksource tsc
[    2.927582] scsi 8:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    2.928068] scsi 8:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    2.928568] scsi 8:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[    2.929067] scsi 8:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    2.929359] sd 8:0:0:0: Attached scsi generic sg3 type 0
[    2.929821] sd 8:0:0:1: Attached scsi generic sg4 type 0
[    2.930075] sd 8:0:0:2: Attached scsi generic sg5 type 0
[    2.930722] sd 8:0:0:3: Attached scsi generic sg6 type 0
[    2.962174] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[    2.963672] sd 8:0:0:1: [sdd] Attached SCSI removable disk
[    2.964427] sd 8:0:0:2: [sde] Attached SCSI removable disk
[    2.965169] sd 8:0:0:3: [sdf] Attached SCSI removable disk
[    2.998373] [drm] ib test on ring 5 succeeded
[    2.998914] [drm] Radeon Display Connectors
[    2.998917] [drm] Connector 0:
[    2.998918] [drm]   HDMI-A-1
[    2.998919] [drm]   HPD1
[    2.998922] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[    2.998923] [drm]   Encoders:
[    2.998924] [drm]     DFP1: INTERNAL_UNIPHY1
[    2.998925] [drm] Connector 1:
[    2.998926] [drm]   DVI-D-1
[    2.998927] [drm]   HPD4
[    2.998929] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[    2.998930] [drm]   Encoders:
[    2.998931] [drm]     DFP2: INTERNAL_UNIPHY
[    2.998932] [drm] Connector 2:
[    2.998933] [drm]   VGA-1
[    2.998935] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    2.998936] [drm]   Encoders:
[    2.998937] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    3.051375] [drm] fb mappable at 0xD045F000
[    3.051377] [drm] vram apper at 0xD0000000
[    3.051379] [drm] size 9216000
[    3.051380] [drm] fb depth is 24
[    3.051381] [drm]    pitch is 7680
[    3.051452] fbcon: radeondrmfb (fb0) is primary device
[    3.085481] Console: switching to colour frame buffer device 240x75
[    3.094319] radeon 0000:03:00.0: fb0: radeondrmfb frame buffer device
[    3.094320] radeon 0000:03:00.0: registered panic notifier
[    3.112284] [drm] Initialized radeon 2.43.0 20080528 for 0000:03:00.0 on minor 0
[    7.614293] random: nonblocking pool is initialized
[   13.942533] audit_printk_skb: 12 callbacks suppressed
[   13.942543] audit: type=1130 audit(1446539924.686:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-cryptsetup@luks\x2da65e136d\x2d6f9e\x2d4e63\x2d9c5c\x2dff0c2897bfd8 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.951940] audit: type=1130 audit(1446539924.695:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-cryptsetup@luks\x2d4573246e\x2dad2b\x2d402c\x2dae6d\x2dce27d322de05 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.954935] audit: type=1130 audit(1446539924.698:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.984339] audit: type=1130 audit(1446539924.727:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.006899] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[   14.077423] audit: type=1130 audit(1446539924.821:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.077448] audit: type=1131 audit(1446539924.821:20): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.223669] audit: type=1130 audit(1446539924.967:21): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.231205] audit: type=1130 audit(1446539924.974:22): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-ask-password-plymouth comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.231230] audit: type=1131 audit(1446539924.974:23): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-ask-password-plymouth comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.231706] audit: type=1130 audit(1446539924.975:24): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.289888] systemd-journald[159]: Received SIGTERM from PID 1 (systemd).
[   14.529873] SELinux: 32768 avtab hash slots, 106843 rules.
[   14.549258] SELinux: 32768 avtab hash slots, 106843 rules.
[   14.584521] SELinux:  8 users, 105 roles, 4979 types, 303 bools, 1 sens, 1024 cats
[   14.584526] SELinux:  92 classes, 106843 rules
[   14.589530] SELinux:  Completing initialization.
[   14.589534] SELinux:  Setting up existing superblocks.
[   14.610598] systemd[1]: Successfully loaded SELinux policy in 132.212ms.
[   14.707309] systemd[1]: Relabelled /dev and /run in 50.261ms.
[   15.133335] EXT4-fs (dm-1): re-mounted. Opts: discard
[   15.219819] systemd-journald[632]: Received request to flush runtime journal from PID 1
[   15.223857] RPC: Registered named UNIX socket transport module.
[   15.223876] RPC: Registered udp transport module.
[   15.223878] RPC: Registered tcp transport module.
[   15.223879] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   15.274423] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   15.456260] acpi-cpufreq: overriding BIOS provided _PSD data
[   15.743459] parport_pc 00:04: reported by Plug and Play ACPI
[   15.743552] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[   15.930331] MCE: In-kernel MCE decoding enabled.
[   15.935537] i2c i2c-8: nForce2 SMBus adapter at 0x1c00
[   15.935575] i2c i2c-9: nForce2 SMBus adapter at 0x1c40
[   15.940434] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   15.943616] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[   15.948593] EDAC MC: Ver: 3.0.0
[   15.957126] AMD64 EDAC driver v3.4.0
[   15.957168] EDAC amd64: DRAM ECC disabled.
[   15.957175] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   16.104517] kvm: Nested Virtualization enabled
[   16.104526] kvm: Nested Paging enabled
[   16.134676] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[   16.134690] snd_hda_intel 0000:00:07.0: Disabling MSI
[   16.134853] snd_hda_intel 0000:03:00.1: Handle VGA-switcheroo audio client
[   16.157625] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0d.0/0000:03:00.1/sound/card1/input8
[   16.259409] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[   16.263763] EXT4-fs (sda1): mounted filesystem without journal. Opts: discard
[   16.298448] ppdev: user-space parallel port driver
[   16.323801] Adding 8386556k swap on /dev/mapper/luks-a65e136d-6f9e-4e63-9c5c-ff0c2897bfd8.  Priority:-1 extents:1 across:8386556k FS
[   16.435335] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   16.435341] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   16.435344] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   16.435346] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   16.435348] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   16.435350] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   16.435353] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   16.435355] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   16.435357] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   16.435359] snd_hda_codec_realtek hdaudioC0D0:      CD=0x1c
[   16.435361] snd_hda_codec_realtek hdaudioC0D0:    dig-in=0x1f
[   17.199582] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input9
[   17.199817] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input10
[   17.199969] input: HDA NVidia Line as /devices/pci0000:00/0000:00:07.0/sound/card0/input11
[   17.200465] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:07.0/sound/card0/input12
[   17.200618] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:07.0/sound/card0/input13
[   17.200766] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:07.0/sound/card0/input14
[   17.200913] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:07.0/sound/card0/input15
[   17.407551] media: Linux media interface: v0.10
[   17.422890] Linux video capture interface: v2.00
[   17.428105] gspca_main: v2.14.0 registered
[   17.433395] gspca_main: gspca_zc3xx-2.14.0 probing 0ac8:303b
[   18.389509] EXT4-fs (dm-2): mounting with "discard" option, but the device does not support discard
[   18.389515] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: discard
[   18.580862] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[   18.625083] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[   18.854427] input: gspca_zc3xx as /devices/pci0000:00/0000:00:02.0/usb2/2-10/input/input16
[   18.854859] usbcore: registered new interface driver gspca_zc3xx
[   18.997656] audit_printk_skb: 162 callbacks suppressed
[   18.997664] audit: type=1130 audit(1446539929.743:79): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   18.997707] audit: type=1131 audit(1446539929.743:80): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.020062] audit: type=1130 audit(1446539929.765:81): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.023913] audit: type=1130 audit(1446539929.769:82): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.023940] audit: type=1131 audit(1446539929.769:83): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.025973] audit: type=1130 audit(1446539929.771:84): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.069775] audit: type=1130 audit(1446539929.815:85): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=fedora-import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.287932] audit: type=1130 audit(1446539930.033:86): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.305674] audit: type=1305 audit(1446539930.051:87): auid=4294967295 ses=4294967295 subj=system_u:system_r:auditctl_t:s0 op="add_rule" key=(null) list=1 res=1
[   19.310471] audit: type=1130 audit(1446539930.056:88): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=auditd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.824779] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[   19.828440] vboxdrv: Found 4 processor cores
[   19.844146] vboxdrv: TSC mode is Invariant, tentative frequency 2310572436 Hz
[   19.844153] vboxdrv: Successfully loaded version 5.0.8 (interface 0x00240000)
[   20.058616] VBoxNetFlt: Successfully started.
[   20.062961] VBoxNetAdp: Successfully started.
[   20.070450] VBoxPciLinuxInit
[   20.070463] vboxpci: IOMMU not found (not registered)
[   20.409799] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   20.444807] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   20.581883] Ebtables v2.0 registered
[   20.609799] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   21.086779] IPv6: ADDRCONF(NETDEV_UP): enp0s6: link is not ready
[   21.087487] forcedeth 0000:00:06.0 enp0s6: MSI enabled
[   23.189293] tun: Universal TUN/TAP device driver, 1.6
[   23.189301] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   23.245744] device virbr0-nic entered promiscuous mode
[   23.496520] virbr0: port 1(virbr0-nic) entered listening state
[   23.496536] virbr0: port 1(virbr0-nic) entered listening state
[   23.562073] virbr0: port 1(virbr0-nic) entered disabled state
[   26.965510] ata5.00: configured for UDMA/133
[   26.965517] ata5: EH complete
[   26.971440] ata6.00: configured for UDMA/133
[   26.971447] ata6: EH complete
[   28.352568] Adjusting tsc more than 11% (8309464 vs 8060111)
[   36.135898] fuse init (API version 7.23)
[   36.853886] Bluetooth: Core ver 2.20
[   36.854191] NET: Registered protocol family 31
[   36.854193] Bluetooth: HCI device and connection manager initialized
[   36.854200] Bluetooth: HCI socket layer initialized
[   36.854203] Bluetooth: L2CAP socket layer initialized
[   36.854213] Bluetooth: SCO socket layer initialized
[   36.869575] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   36.869583] Bluetooth: BNEP filters: protocol multicast
[   36.869594] Bluetooth: BNEP socket layer initialized

J'ai relevé surtout ces lignes :

=exited, status=1/FAILURE
[    1.693226] systemd[1]: Failed to start Load Kernel Modules.
[    1.693272] systemd[1]: Unit systemd-modules-load.service entered failed state.
[    1.693381] audit: type=1130 audit(1446539912.432:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[    1.693407] systemd[1]: systemd-modules-load.service failed.
[    1.693864] systemd[1]: Started Create list of required static device nodes for the current kernel.

Et celle-ci :

[   15.943616] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled

Le journal de log commence en fait de l'installation depuis le 01 mars 20015, car c'est à ce moment là que j'ai installé mon ordinateur avec la Fedora 21.
Cette ligne m'intrigue :

mars 01 17:53:21 localhost.localdomain kernel: k10temp 0000:00:18.3: unreliable CP

Il semble que ça concerne un capteur...
Pour le reste du journal il est impossible de le copier ici, et je n'ai pas trouvé d'application permettant d'ouvrir le journal qui est dans /usr/bin

Que pense-tu de tout ça ?

Merci par avance pour ton avis.
Bonne soirée à toi.


Jules-Marie-84

Fedora 30 Net-Install -  AMD FX 8350 - Gigabyte GA 970 gaming - 16Gb ram DDR3 1600 - Vidéo ATI 2 GiO - SSD Samsung M2 PCIe 250 GiO "système" - SSD Samsung Sata 3 1 To "datas"

Hors ligne

#5 03/11/2015 21:27:30

Nicosss
Membre
Lieu : Isère
Inscription : 05/03/2007
Messages : 5 010
Site Web

Re : [Résolu] Message d'erreur lors du boot

Je vois ça aussi

[   19.824779] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel

Tu dois avoir VirtualBox d'installé, peut-être lui qui cause cette erreur.

Pour le résultat de la commande du kernel tu as omis *, ce qui fait une différence dans le résultat.

Pour le souci du k10temp que retourne

$ lsmod

F30_64 Gnome-Shell - GA-990FXA-UD3 - Phenom II X6 1100T - NH-D14 - Ati HD 5750 Fanless - 16Go RAM /&/ F30_64 Gnome-Shell - Toshiba Satellite C660D-19X - 8Go RAM
F30_64 - ASRock 960GC-GS FX - AMD FX(tm)-8300 - 16Go RAM

Hors ligne

#6 03/11/2015 21:44:53

Jules-Marie-84
Membre
Inscription : 28/10/2012
Messages : 296

Re : [Résolu] Message d'erreur lors du boot

Merci pour ta réponse Nicosss.

OUPS ! en effet, il manquait "*"... sad

Le résultat est maintenant :

$ rpm -qa kernel*
kernel-core-4.1.7-100.fc21.x86_64
kernel-4.1.8-100.fc21.x86_64
kernel-devel-4.1.8-100.fc21.x86_64
kernel-devel-4.2.3-200.fc22.x86_64
kernel-modules-4.1.7-100.fc21.x86_64
kernel-modules-4.1.8-100.fc21.x86_64
kernel-4.2.3-200.fc22.x86_64
kernel-core-4.2.3-200.fc22.x86_64
kernel-core-4.1.8-100.fc21.x86_64
kernel-devel-4.1.7-100.fc21.x86_64
kernel-devel-4.1.6-100.fc21.x86_64
kernel-4.1.7-100.fc21.x86_64
kernel-headers-4.2.3-200.fc22.x86_64
kernel-modules-4.2.3-200.fc22.x86_64

pour lsmod :

$ lsmod
Module                  Size  Used by
nls_utf8               16384  0
isofs                  40960  0
binfmt_misc            20480  1
bnep                   20480  2
bluetooth             483328  5 bnep
rfkill                 24576  2 bluetooth
fuse                   94208  3
xt_CHECKSUM            16384  1
ipt_MASQUERADE         16384  3
nf_nat_masquerade_ipv4    16384  1 ipt_MASQUERADE
tun                    28672  1
ip6t_rpfilter          16384  1
ip6t_REJECT            16384  5
nf_reject_ipv6         16384  1 ip6t_REJECT
xt_conntrack           16384  19
ebtable_nat            16384  1
ebtable_broute         16384  1
bridge                114688  1 ebtable_broute
ebtable_filter         16384  1
ebtables               32768  3 ebtable_broute,ebtable_nat,ebtable_filter
ip6table_nat           16384  1
nf_conntrack_ipv6      20480  10
nf_defrag_ipv6         36864  1 nf_conntrack_ipv6
nf_nat_ipv6            16384  1 ip6table_nat
ip6table_mangle        16384  1
ip6table_security      16384  1
ip6table_raw           16384  1
ip6table_filter        16384  1
ip6_tables             28672  5 ip6table_filter,ip6table_mangle,ip6table_security,ip6table_nat,ip6table_raw
iptable_nat            16384  1
nf_conntrack_ipv4      16384  11
nf_defrag_ipv4         16384  1 nf_conntrack_ipv4
nf_nat_ipv4            16384  1 iptable_nat
nf_nat                 28672  3 nf_nat_ipv4,nf_nat_ipv6,nf_nat_masquerade_ipv4
nf_conntrack          106496  7 nf_nat,nf_nat_ipv4,nf_nat_ipv6,xt_conntrack,nf_nat_masquerade_ipv4,nf_conntrack_ipv4,nf_conntrack_ipv6
iptable_mangle         16384  1
iptable_security       16384  1
iptable_raw            16384  1
vboxpci                24576  0
vboxnetadp             28672  0
vboxnetflt             28672  0
vboxdrv               430080  3 vboxnetadp,vboxnetflt,vboxpci
gspca_zc3xx            53248  0
gspca_main             36864  1 gspca_zc3xx
videodev              163840  2 gspca_main,gspca_zc3xx
media                  24576  1 videodev
snd_hda_codec_realtek    86016  1
snd_hda_codec_generic    73728  1 snd_hda_codec_realtek
ppdev                  20480  0
snd_hda_codec_hdmi     49152  1
snd_hda_intel          36864  12
snd_hda_codec         126976  4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
kvm_amd                65536  0
snd_hda_core           61440  5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
kvm                   499712  1 kvm_amd
snd_hwdep              16384  1 snd_hda_codec
snd_seq                69632  0
snd_seq_device         16384  1 snd_seq
snd_pcm               114688  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_core
snd_timer              32768  2 snd_pcm,snd_seq
snd                    77824  34 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
soundcore              16384  1 snd
edac_core              53248  0
k10temp                16384  0
shpchp                 36864  0
i2c_nforce2            16384  0
edac_mce_amd           24576  0
parport_pc             28672  0
parport                49152  2 ppdev,parport_pc
acpi_cpufreq           20480  0
nfsd                  315392  1
auth_rpcgss            61440  1 nfsd
nfs_acl                16384  1 nfsd
lockd                  94208  1 nfsd
grace                  16384  2 nfsd,lockd
sunrpc                311296  7 nfsd,auth_rpcgss,lockd,nfs_acl
dm_crypt               28672  5
8021q                  32768  0
garp                   16384  1 8021q
stp                    16384  2 garp,bridge
llc                    16384  3 stp,garp,bridge
mrp                    20480  1 8021q
ata_generic            16384  0
amdkfd                118784  1
pata_acpi              16384  0
amd_iommu_v2           20480  1 amdkfd
radeon               1515520  6
i2c_algo_bit           16384  1 radeon
drm_kms_helper        118784  1 radeon
ttm                    90112  1 radeon
drm                   335872  9 ttm,drm_kms_helper,radeon
serio_raw              16384  0
uas                    24576  0
firewire_ohci          40960  0
usb_storage            65536  1 uas
firewire_core          65536  1 firewire_ohci
forcedeth              69632  0
crc_itu_t              16384  1 firewire_core
pata_amd               20480  0
[root@localhost ~] $ 

Franchement je ne repère rien de particulier, mais bon, je ne comprends pas vraiment non plus les résultats... roll

Oui, j'ai effectivement VirtualBox d'installé.

En tout cas tu as un sacré coup d'œil pour avoir repéré si rapidement ces erreurs. smile

J'ai récupéré Fedora 23, comme j'ai des tiroirs sur mon bestiau, je vais la tester demain (là je ne peux pas) et bien entendu sans installer VirtualBox.
Je vais bien surveiller le démarrage, quitte à le filmer aussi pour ne rien rater. Je verrai à ce moment là si l'erreur est toujours là en l'absence de VirtualBox.
Bien sûr je te tiens au courant, merci par avance pour ton aide.
Bien cordialement.


Jules-Marie-84

Fedora 30 Net-Install -  AMD FX 8350 - Gigabyte GA 970 gaming - 16Gb ram DDR3 1600 - Vidéo ATI 2 GiO - SSD Samsung M2 PCIe 250 GiO "système" - SSD Samsung Sata 3 1 To "datas"

Hors ligne

#7 03/11/2015 22:08:34

Nicosss
Membre
Lieu : Isère
Inscription : 05/03/2007
Messages : 5 010
Site Web

Re : [Résolu] Message d'erreur lors du boot

Concernant k10temp, ce dernier semble bien chargé.
Que retourne

$ sensors

Selon ce que tu as il faudra peut-être forcer le module

# rmmod k10temp
# modprobe k10temp force=1

Puis refaire la commande sensors et voir s'il y a du changement.


F30_64 Gnome-Shell - GA-990FXA-UD3 - Phenom II X6 1100T - NH-D14 - Ati HD 5750 Fanless - 16Go RAM /&/ F30_64 Gnome-Shell - Toshiba Satellite C660D-19X - 8Go RAM
F30_64 - ASRock 960GC-GS FX - AMD FX(tm)-8300 - 16Go RAM

Hors ligne

#8 04/11/2015 09:33:30

Jules-Marie-84
Membre
Inscription : 28/10/2012
Messages : 296

Re : [Résolu] Message d'erreur lors du boot

Bonjour Nicoss, et merci pour ta réponse.
Voici le résultat de la commande sensors :

$ sensors
radeon-pci-0300
Adapter: PCI adapter
temp1:        +42.0°C  (crit = +120.0°C, hyst = +90.0°C)

Curieusement ce résultat semble correspondre à ma carte graphique, c'est tout ce que j'obtiens.

j'ai donc, en root, fait les commandes suivantes.

# rmmod k10temp
# modprobe k10temp force=1

Aucune erreur n'a été retournée.

Ensuite le résultat à sensors :

$ sensors
radeon-pci-0300
Adapter: PCI adapter
temp1:        +44.5°C  (crit = +120.0°C, hyst = +90.0°C)

k10temp-pci-00c3
Adapter: PCI adapter
temp1:        +25.5°C  (high = +70.0°C)

Cette fois il apparait un résultat de plus, mais encore sur un "PCI Adapter", celà ne semble pas être la température du processeur, bien trop "froid" me semble-t-il...
Comment rendre ce résultat permanent si c'est bien ça qui produit l'erreur ?

Tout à l'heure je vais tester la Fedora 23 sur un disque que j'utilise parfois pour ça, donc ça sera "en dur", je te tiens au courant des résultats, à savoir si j'ai toujours cette erreur au boot ou si c'est bien dû à VirtualBox, que je n'installerai pas cette fois bien sûr.

Merci pour ton aide.


Jules-Marie-84

Fedora 30 Net-Install -  AMD FX 8350 - Gigabyte GA 970 gaming - 16Gb ram DDR3 1600 - Vidéo ATI 2 GiO - SSD Samsung M2 PCIe 250 GiO "système" - SSD Samsung Sata 3 1 To "datas"

Hors ligne

#9 04/11/2015 12:07:23

Nicosss
Membre
Lieu : Isère
Inscription : 05/03/2007
Messages : 5 010
Site Web

Re : [Résolu] Message d'erreur lors du boot

Pour le mettre en dur tu peux faire

# echo "options k10temp force=1" > /etc/modprobe.d/k10temp.conf

Tu pourras éditer le fichier pour mettre des commentaires.

Sinon pour voir si tu as d'autres sondes tu essayeras de faire

# sensors-detect

F30_64 Gnome-Shell - GA-990FXA-UD3 - Phenom II X6 1100T - NH-D14 - Ati HD 5750 Fanless - 16Go RAM /&/ F30_64 Gnome-Shell - Toshiba Satellite C660D-19X - 8Go RAM
F30_64 - ASRock 960GC-GS FX - AMD FX(tm)-8300 - 16Go RAM

Hors ligne

#10 05/11/2015 20:39:09

Jules-Marie-84
Membre
Inscription : 28/10/2012
Messages : 296

Re : [Résolu] Message d'erreur lors du boot

Bonsoir Nicosss,
je reviens vers toi comme promis, mais bien plus tard que prévu. sad
Et avant tout, merci pour ta dernière réponse.

Pour faire suite aux manipulations que tu m'as suggéré, voici le résultat de # sensors-detect :

$ sensors
radeon-pci-0300
Adapter: PCI adapter
temp1:        +52.0°C  (crit = +120.0°C, hyst = +90.0°C)

it8716-isa-0290
Adapter: ISA adapter
in0:          +1.25 V  (min =  +0.00 V, max =  +4.08 V)
in1:          +1.90 V  (min =  +0.00 V, max =  +4.08 V)
in2:          +3.30 V  (min =  +0.00 V, max =  +4.08 V)
in3:          +3.30 V  (min =  +0.00 V, max =  +4.08 V)
in4:          +3.14 V  (min =  +0.00 V, max =  +4.08 V)
in5:          +4.08 V  (min =  +0.00 V, max =  +4.08 V)  ALARM
in6:          +4.08 V  (min =  +0.00 V, max =  +4.08 V)  ALARM
in7:          +3.30 V  (min =  +0.00 V, max =  +4.08 V)
Vbat:         +3.14 V  
fan1:        1049 RPM  (min =   10 RPM)
fan2:           0 RPM  (min =    0 RPM)
temp1:        +30.0°C  (low  = +127.0°C, high = +60.0°C)  sensor = thermistor
temp2:        +40.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp3:        +32.0°C  (low  = +127.0°C, high = +60.0°C)  sensor = thermal diode
cpu0_vid:    +0.613 V
intrusion0:  OK

Donc tout un "troupeau" de capteurs a été détecté. lol
Pour infos, je me suis borné à répondre "oui" à chaque question, comme c'est d'ailleurs conseillé par défaut.
Curieusement, suite à ça le :

k10temp-pci-00c3
Adapter: PCI adapter
temp1:        +25.5°C  (high = +70.0°C)

n’apparait plus... hmm
Je l'avais pourtant bien forcé comme tu me l'avais recommandé et créé un fichier avec la commande :

echo "options k10temp force=1" > /etc/modprobe.d/k10temp.conf

ceci en root bien entendu.

Mais tout ceci n'a rien changé coté erreurs...

Du coup je me suis dit que cette erreur vient très probablement de VirtualBox, comme tu me l'avais fait remarquer et qui apparait ici :

19.824779] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel

D'un autre coté, comme je te l'avais dit hier, j'ai tout à l'heure retiré mes disques système et mis un disque dur, qui me sert pour faire des essais, dans ma machine.
Là dessus j'ai installé, donc en "dur", la Fedora 23.
J'ai fait ensuite toutes les mises à jour, activé les dépôts RPM Free et non Free, puis installé les logiciels dont je me sert toujours, en fait j'ai répété la même installation que celle que j'ai actuellement avec la version 22 (qui je le rappelle est une mise à niveau depuis la F21).

Sans dans un premier temps, installer VirtualBox (version 5)

Suite à ça, j'ai bien entendu redémarré mon bestiau plusieurs fois, AUCUN MESSAGE D'ERREUR.
Comme le résultat à "sensors" ne me montrait pas non plus le k10temp-pci-00c3 j'ai donc créé de la même façon que sur ma F22 un fichier avec

echo "options k10temp force=1" > /etc/modprobe.d/k10temp.conf

J'ai également fait une recherche des autres capteurs, avec un résultat identique, sauf que le capteur K10 continue d’apparaitre dans la liste avec tous les autres capteurs, contrairement à ce qui se passe sur la F22.

Voyant que tout fonctionnait bien et que je n'avais aucun message d'erreur après encore 3 redémarrages successifs, j'ai donc décidé d'installer VirtualBox de la même façon que sur ma version 22 de Fedora :

cd /etc/yum.repos.d/

puis :

wget http://download.virtualbox.org/virtualbox/rpm/fedora/virtualbox.repo

et :

cd
yum update
rpm -qa kernel |sort -V |tail -n 1
uname -r
yum install binutils gcc make patch libgomp glibc-headers glibc-devel kernel-headers kernel-devel dkms
yum install VirtualBox

et pour finir ajout de mon "user" au groupe de VB :

usermod -a -G vboxusers « USER »

J'ai également ajouté le module qui va bien pour avoir accès aux périphériques USB.

Ceci terminé j'ai redémarré ma machine et...AUCUNE ERREUR.
J'ai même été jusqu'à installer une distribution avec VirtualBox, mais bien entendu, et comme j'en étais pour ce coup certain, il n'y a pas eu d'erreur au redémarrage.

Je conclus donc que quelque chose à "m...é" au moment du passage à Fedora 22 depuis ma version 21, ou plus vraisemblablement que je traine cette erreur, sans l'avoir constatée, comme je l'expliquait dans mon premier message depuis ma première installation de la version 21.

Par contre tes messages et ton temps n'auront pas étés vains, bien au contraire.
En dehors du fait que grâce à toi j'ai encore apris des choses importantes, et je te renouvèle mes remerciements pour ça aussi, je vais pourvoir ainsi corriger sur mon installation prochaine,  À PARTIR DE MES DISQUES FORMATÉS ET REMIS À 0, le problème du repérages des capteurs, surtout le fameux "K10". Car tout de même, sans ces manipulations, mes capteurs ne sont pas tous repérés.

Voilà, je ne sais pas si de ton coté, tu souhaite que je fasse d'autres manipulations, si tu veux "creuser" la chose d'avantage, ou si tu préfère te dire comme moi, que le mieux au final est de repartir sur une installation "neuve".
Selon ta réponse je passerai alors le sujet en "résolu", bien que ça ne soit pas tout à fait le cas.
J'attends ton avis, vis à vis du forum.

Nicosss un grand merci pour le temps que tu m'as consacré. pint
Je te souhaite une excellente soirée.
Très cordialement.


Jules-Marie-84

Fedora 30 Net-Install -  AMD FX 8350 - Gigabyte GA 970 gaming - 16Gb ram DDR3 1600 - Vidéo ATI 2 GiO - SSD Samsung M2 PCIe 250 GiO "système" - SSD Samsung Sata 3 1 To "datas"

Hors ligne

#11 05/11/2015 22:46:22

Nicosss
Membre
Lieu : Isère
Inscription : 05/03/2007
Messages : 5 010
Site Web

Re : [Résolu] Message d'erreur lors du boot

Ca fait beaucoup de remerciements tout ça, 1 seul m'aurait suffit wink Nous sommes là pour nous entre-aider après tout, et puis t'inquiète ce n'est pas perdu pour moi non plus ou ceux qui lisent.

Du coup effectivement, je partirai sur une installation propre de F23 tout simplement car il est possible que tu traines ça d'une migration et je ne pense pas que tu ais envie de faire des tests jusqu'à plus soif.

L'idée est déjà de savoir comment rechercher une information et de faire des jolis post avec les réponses aux questions et les retours de commandes demandées comme tu as pu faire. C'est plus agréable pour ceux qui aident.

Allez au prochain problème pint

Bonne soirée et bonne continuation


F30_64 Gnome-Shell - GA-990FXA-UD3 - Phenom II X6 1100T - NH-D14 - Ati HD 5750 Fanless - 16Go RAM /&/ F30_64 Gnome-Shell - Toshiba Satellite C660D-19X - 8Go RAM
F30_64 - ASRock 960GC-GS FX - AMD FX(tm)-8300 - 16Go RAM

Hors ligne

#12 06/11/2015 10:13:33

Jules-Marie-84
Membre
Inscription : 28/10/2012
Messages : 296

Re : [Résolu] Message d'erreur lors du boot

Il est normal de remercier ceux qui nous aident et nous tendent la main, c'est aussi la moindre des politesse. smile
Oui, je vais réinstaller au propre, si j'ai le courage et que le temps se couvre (ici il fait un soleil estival), je le ferai dimanche, sinon un soir de semaine.
Je te souhaite un excellent WE Nicosss. pint
Et comme tu dis "au prochain problème" lol


Jules-Marie-84

Fedora 30 Net-Install -  AMD FX 8350 - Gigabyte GA 970 gaming - 16Gb ram DDR3 1600 - Vidéo ATI 2 GiO - SSD Samsung M2 PCIe 250 GiO "système" - SSD Samsung Sata 3 1 To "datas"

Hors ligne

Pied de page des forums