Je te mets la partie où apparait l'imprimante et l'ensemble
-0000:00:1d.0-1.3/input0
[ 2994.844946] usb 3-1.2: new high-speed USB device number 3 using ehci-pci
[ 2994.932310] usb 3-1.2: New USB device found, idVendor=04a9, idProduct=173b
[ 2994.932317] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2994.932321] usb 3-1.2: Product: MP270 series
[ 2994.932324] usb 3-1.2: Manufacturer: Canon
[ 2994.932328] usb 3-1.2: SerialNumber: 82F63D
[ 2994.998808] usblp 3-1.2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x173B
[ 2994.998832] usbcore: registered new interface driver usblp
[ 2996.117965] usblp0: removed
[ 2996.121635] usblp 3-1.2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x173B
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdfe70 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x0203a000, 0x0203afff] PGTABLE
[ 0.000000] BRK [0x0203b000, 0x0203bfff] PGTABLE
[ 0.000000] BRK [0x0203c000, 0x0203cfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21fe00000-0x21fffffff]
[ 0.000000] [mem 0x21fe00000-0x21fffffff] page 2M
[ 0.000000] BRK [0x0203d000, 0x0203dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21fdfffff]
[ 0.000000] [mem 0x21c000000-0x21fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xdfe6ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xdfdfffff] page 2M
[ 0.000000] [mem 0xdfe00000-0xdfe6ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] BRK [0x0203e000, 0x0203efff] PGTABLE
[ 0.000000] BRK [0x0203f000, 0x0203ffff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35ea3000-0x36f49fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FB920 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0x00000000DFE70000 000044 (v01 102910 RSDT1537 20101029 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000DFE70200 000084 (v01 102910 FACP1537 20101029 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x00000000DFE704A0 00EF15 (v01 A1511 A1511001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 0x00000000DFE88000 000040
[ 0.000000] ACPI: APIC 0x00000000DFE70390 0000CC (v01 102910 APIC1537 20101029 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000DFE70460 00003C (v01 102910 OEMMCFG 20101029 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000DFE88040 000072 (v01 102910 OEMB1537 20101029 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DFE7F3C0 000038 (v01 102910 OEMHPET 20101029 MSFT 00000097)
[ 0.000000] ACPI: ASPT 0x00000000DFE7F660 000034 (v06 102910 PerfTune 20101029 MSFT 00000097)
[ 0.000000] ACPI: OSFR 0x00000000DFE7F6A0 0000B0 (v01 102910 OEMOSFR 20101029 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000DFE897E0 000363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x21ffe6000-0x21fff9fff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217600000-ffff88021f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xdfe6ffff]
[ 0.000000] node 0: [mem 0x100000000-0x21fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x21fffffff]
[ 0.000000] On node 0 totalpages: 2096654
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14266 pages used for memmap
[ 0.000000] DMA32 zone: 913008 pages, LIFO batch:31
[ 0.000000] Normal zone: 18432 pages used for memmap
[ 0.000000] Normal zone: 1179648 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfe70000-0xdfe87fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfe88000-0xdfedbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfedc000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88021fc00000 s84480 r8192 d30208 u131072
[ 0.000000] pcpu-alloc: s84480 r8192 d30208 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2063871
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.18.7-200.fc21.x86_64 root=UUID=f4eb275b-b0b8-4bb6-b89e-671cb4ed3efd ro rhgb quiet nouveau.modeset=0 rd.driver.blacklist=nouveau video=vesa:off
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 8153444K/8386616K available (7593K kernel code, 1235K rwdata, 3276K rodata, 1500K init, 1552K bss, 233172K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=16.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[ 0.000000] NR_IRQS:65792 nr_irqs:552 0
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-15.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2808.522 MHz processor
[ 0.000031] Calibrating delay loop (skipped), value calculated using timer frequency.. 5617.04 BogoMIPS (lpj=2808522)
[ 0.000033] pid_max: default: 32768 minimum: 301
[ 0.000041] ACPI: Core revision 20140926
[ 0.009006] ACPI: All ACPI Tables successfully acquired
[ 0.114010] Security Framework initialized
[ 0.114017] SELinux: Initializing.
[ 0.114022] SELinux: Starting in permissive mode
[ 0.114662] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.117235] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.118324] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.118335] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.118596] Initializing cgroup subsys memory
[ 0.118603] Initializing cgroup subsys devices
[ 0.118605] Initializing cgroup subsys freezer
[ 0.118607] Initializing cgroup subsys net_cls
[ 0.118609] Initializing cgroup subsys blkio
[ 0.118611] Initializing cgroup subsys perf_event
[ 0.118612] Initializing cgroup subsys net_prio
[ 0.118614] Initializing cgroup subsys hugetlb
[ 0.118634] CPU: Physical Processor ID: 0
[ 0.118635] CPU: Processor Core ID: 0
[ 0.118640] mce: CPU supports 9 MCE banks
[ 0.118648] CPU0: Thermal monitoring enabled (TM1)
[ 0.118657] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.118736] Freeing SMP alternatives memory: 28K (ffffffff81ead000 - ffffffff81eb4000)
[ 0.119587] ftrace: allocating 27471 entries in 108 pages
[ 0.131651] Switched APIC routing to physical flat.
[ 0.132035] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.142048] smpboot: CPU0: Intel(R) Core(TM) i5 CPU 760 @ 2.80GHz (fam: 06, model: 1e, stepping: 05)
[ 0.243732] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.243747] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.243748] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.243750] ... version: 3
[ 0.243751] ... bit width: 48
[ 0.243752] ... generic registers: 4
[ 0.243752] ... value mask: 0000ffffffffffff
[ 0.243753] ... max period: 000000007fffffff
[ 0.243754] ... fixed-purpose events: 3
[ 0.243755] ... event mask: 000000070000000f
[ 0.245136] x86: Booting SMP configuration:
[ 0.245138] .... node #0, CPUs: #1
[ 0.256499] CPU1 microcode updated early to revision 0x7, date = 2013-08-20
[ 0.258736] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.258840] #2
[ 0.270202] CPU2 microcode updated early to revision 0x7, date = 2013-08-20
[ 0.272390] #3
[ 0.283751] CPU3 microcode updated early to revision 0x7, date = 2013-08-20
[ 0.285843] x86: Booted up 1 node, 4 CPUs
[ 0.285847] smpboot: Total of 4 processors activated (22468.17 BogoMIPS)
[ 0.288743] devtmpfs: initialized
[ 0.291318] PM: Registering ACPI NVS region [mem 0xdfe88000-0xdfedbfff] (344064 bytes)
[ 0.292258] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.292261] pinctrl core: initialized pinctrl subsystem
[ 0.292300] RTC time: 8:56:54, date: 03/03/15
[ 0.292392] NET: Registered protocol family 16
[ 0.297636] cpuidle: using governor menu
[ 0.297759] ACPI: bus type PCI registered
[ 0.297761] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.297836] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.297838] PCI: not using MMCONFIG
[ 0.297839] PCI: Using configuration type 1 for base access
[ 0.303034] ACPI: Added _OSI(Module Device)
[ 0.303036] ACPI: Added _OSI(Processor Device)
[ 0.303037] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.303038] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.305031] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.310784] ACPI: Dynamic OEM Table Load:
[ 0.310792] ACPI: SSDT 0xFFFF880213E68000 001238 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.311202] ACPI: Dynamic OEM Table Load:
[ 0.311206] ACPI: SSDT 0xFFFF880213C43000 0004D5 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.311778] ACPI: Interpreter enabled
[ 0.311787] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
[ 0.311798] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.311799] ACPI: Using IOAPIC for interrupt routing
[ 0.311815] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.312744] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.312872] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.318207] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.318212] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.318356] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[ 0.318425] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.318428] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.318430] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.318431] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.318537] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.318682] PCI host bridge to bus 0000:00
[ 0.318684] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.318686] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.318688] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.318689] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.318691] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.318692] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff]
[ 0.318694] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed8ffff]
[ 0.318702] pci 0000:00:00.0: [8086:d131] type 00 class 0x060000
[ 0.318799] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
[ 0.318849] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.318888] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.318924] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
[ 0.319013] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
[ 0.319102] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
[ 0.319188] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
[ 0.319268] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
[ 0.319342] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
[ 0.319440] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.319460] pci 0000:00:1a.0: reg 0x10: [mem 0xf3ffe000-0xf3ffe3ff]
[ 0.319544] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.319582] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.319619] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.319634] pci 0000:00:1b.0: reg 0x10: [mem 0xf3ff8000-0xf3ffbfff 64bit]
[ 0.319702] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.319768] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.319830] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.319868] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.319903] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.319965] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.320003] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.320037] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
[ 0.320098] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.320136] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.320170] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[ 0.320231] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.320269] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.320304] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[ 0.320371] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.320410] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.320444] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
[ 0.320505] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.320543] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.320576] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
[ 0.320642] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.320680] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.320714] pci 0000:00:1c.7: [8086:3b50] type 01 class 0x060400
[ 0.320779] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.320818] pci 0000:00:1c.7: System wakeup disabled by ACPI
[ 0.320856] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.320875] pci 0000:00:1d.0: reg 0x10: [mem 0xf3ffd000-0xf3ffd3ff]
[ 0.320959] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.320997] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.321033] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.321107] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.321143] pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100
[ 0.321300] pci 0000:00:1f.2: [8086:3b20] type 00 class 0x01018f
[ 0.321314] pci 0000:00:1f.2: reg 0x10: [io 0x9c00-0x9c07]
[ 0.321321] pci 0000:00:1f.2: reg 0x14: [io 0x9880-0x9883]
[ 0.321328] pci 0000:00:1f.2: reg 0x18: [io 0x9800-0x9807]
[ 0.321335] pci 0000:00:1f.2: reg 0x1c: [io 0x9480-0x9483]
[ 0.321341] pci 0000:00:1f.2: reg 0x20: [io 0x9400-0x940f]
[ 0.321350] pci 0000:00:1f.2: reg 0x24: [io 0x9080-0x908f]
[ 0.321438] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.321452] pci 0000:00:1f.3: reg 0x10: [mem 0xf3ffc000-0xf3ffc0ff 64bit]
[ 0.321470] pci 0000:00:1f.3: reg 0x20: [io 0xffe0-0xffff]
[ 0.321544] pci 0000:00:1f.5: [8086:3b26] type 00 class 0x010185
[ 0.321557] pci 0000:00:1f.5: reg 0x10: [io 0xac00-0xac07]
[ 0.321564] pci 0000:00:1f.5: reg 0x14: [io 0xa880-0xa883]
[ 0.321571] pci 0000:00:1f.5: reg 0x18: [io 0xa800-0xa807]
[ 0.321578] pci 0000:00:1f.5: reg 0x1c: [io 0xa480-0xa483]
[ 0.321584] pci 0000:00:1f.5: reg 0x20: [io 0xa400-0xa40f]
[ 0.321591] pci 0000:00:1f.5: reg 0x24: [io 0xa080-0xa08f]
[ 0.321721] pci 0000:01:00.0: [10de:0e22] type 00 class 0x030000
[ 0.321731] pci 0000:01:00.0: reg 0x10: [mem 0xf4000000-0xf5ffffff]
[ 0.321741] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.321750] pci 0000:01:00.0: reg 0x1c: [mem 0xe4000000-0xe7ffffff 64bit pref]
[ 0.321757] pci 0000:01:00.0: reg 0x24: [io 0xbc00-0xbc7f]
[ 0.321763] pci 0000:01:00.0: reg 0x30: [mem 0xf7b00000-0xf7b7ffff pref]
[ 0.321845] pci 0000:01:00.1: [10de:0beb] type 00 class 0x040300
[ 0.321855] pci 0000:01:00.1: reg 0x10: [mem 0xf7bfc000-0xf7bfffff]
[ 0.324375] pci 0000:00:03.0: PCI bridge to [bus 01]
[ 0.324382] pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
[ 0.324387] pci 0000:00:03.0: bridge window [mem 0xf4000000-0xf7bfffff]
[ 0.324394] pci 0000:00:03.0: bridge window [mem 0xe4000000-0xefffffff 64bit pref]
[ 0.324457] pci 0000:00:1c.0: PCI bridge to [bus 09]
[ 0.324509] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.324561] pci 0000:00:1c.2: PCI bridge to [bus 07]
[ 0.324611] pci 0000:00:1c.3: PCI bridge to [bus 06]
[ 0.324687] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.324716] pci 0000:05:00.0: reg 0x10: [mem 0xf7efe000-0xf7efffff 64bit]
[ 0.324862] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.327382] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.327391] pci 0000:00:1c.4: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.327463] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.327544] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
[ 0.327630] pci 0000:03:00.0: reg 0x24: [mem 0xf7dfe000-0xf7dfffff]
[ 0.327698] pci 0000:03:00.0: PME# supported from D3hot
[ 0.327758] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[ 0.327779] pci 0000:03:00.1: reg 0x10: [io 0xdc00-0xdc07]
[ 0.327788] pci 0000:03:00.1: reg 0x14: [io 0xd880-0xd883]
[ 0.327798] pci 0000:03:00.1: reg 0x18: [io 0xd800-0xd807]
[ 0.327807] pci 0000:03:00.1: reg 0x1c: [io 0xd480-0xd483]
[ 0.327817] pci 0000:03:00.1: reg 0x20: [io 0xd400-0xd40f]
[ 0.327917] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.327927] pci 0000:00:1c.6: PCI bridge to [bus 03]
[ 0.327931] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.327934] pci 0000:00:1c.6: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.327999] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.328018] pci 0000:02:00.0: reg 0x10: [io 0xc800-0xc8ff]
[ 0.328044] pci 0000:02:00.0: reg 0x18: [mem 0xf2fff000-0xf2ffffff 64bit pref]
[ 0.328060] pci 0000:02:00.0: reg 0x20: [mem 0xf2ff8000-0xf2ffbfff 64bit pref]
[ 0.328071] pci 0000:02:00.0: reg 0x30: [mem 0xf7cf0000-0xf7cfffff pref]
[ 0.328150] pci 0000:02:00.0: supports D1 D2
[ 0.328151] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.330392] pci 0000:00:1c.7: PCI bridge to [bus 02]
[ 0.330399] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 0.330404] pci 0000:00:1c.7: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.330413] pci 0000:00:1c.7: bridge window [mem 0xf2f00000-0xf2ffffff 64bit pref]
[ 0.330471] pci 0000:0a:04.0: [1106:3044] type 00 class 0x0c0010
[ 0.330487] pci 0000:0a:04.0: reg 0x10: [mem 0xf7fff800-0xf7ffffff]
[ 0.330496] pci 0000:0a:04.0: reg 0x14: [io 0xec00-0xec7f]
[ 0.330563] pci 0000:0a:04.0: supports D2
[ 0.330564] pci 0000:0a:04.0: PME# supported from D2 D3hot D3cold
[ 0.330628] pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
[ 0.330632] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.330635] pci 0000:00:1e.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.330640] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.330641] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.330643] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.330644] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.330646] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
[ 0.330648] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfed8ffff] (subtractive decode)
[ 0.331241] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.331283] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.331323] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.331365] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.331410] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.331452] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.331494] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.331535] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.331577] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.331609] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.331690] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.331692] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.331693] vgaarb: loaded
[ 0.331694] vgaarb: bridge control possible 0000:01:00.0
[ 0.331757] SCSI subsystem initialized
[ 0.331789] libata version 3.00 loaded.
[ 0.331817] ACPI: bus type USB registered
[ 0.331832] usbcore: registered new interface driver usbfs
[ 0.331840] usbcore: registered new interface driver hub
[ 0.331858] usbcore: registered new device driver usb
[ 0.331939] PCI: Using ACPI for IRQ routing
[ 0.333118] PCI: Discovered peer bus 3f
[ 0.333119] PCI: root bus 3f: using default resources
[ 0.333120] PCI: Probing PCI hardware (bus 3f)
[ 0.333146] PCI host bridge to bus 0000:3f
[ 0.333148] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
[ 0.333150] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.333151] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
[ 0.333154] pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[ 0.333160] pci 0000:3f:00.0: [8086:2c51] type 00 class 0x060000
[ 0.333198] pci 0000:3f:00.1: [8086:2c81] type 00 class 0x060000
[ 0.333236] pci 0000:3f:02.0: [8086:2c90] type 00 class 0x060000
[ 0.333271] pci 0000:3f:02.1: [8086:2c91] type 00 class 0x060000
[ 0.333308] pci 0000:3f:03.0: [8086:2c98] type 00 class 0x060000
[ 0.333342] pci 0000:3f:03.1: [8086:2c99] type 00 class 0x060000
[ 0.333380] pci 0000:3f:03.4: [8086:2c9c] type 00 class 0x060000
[ 0.333416] pci 0000:3f:04.0: [8086:2ca0] type 00 class 0x060000
[ 0.333451] pci 0000:3f:04.1: [8086:2ca1] type 00 class 0x060000
[ 0.333485] pci 0000:3f:04.2: [8086:2ca2] type 00 class 0x060000
[ 0.333521] pci 0000:3f:04.3: [8086:2ca3] type 00 class 0x060000
[ 0.333557] pci 0000:3f:05.0: [8086:2ca8] type 00 class 0x060000
[ 0.333592] pci 0000:3f:05.1: [8086:2ca9] type 00 class 0x060000
[ 0.333628] pci 0000:3f:05.2: [8086:2caa] type 00 class 0x060000
[ 0.333663] pci 0000:3f:05.3: [8086:2cab] type 00 class 0x060000
[ 0.333707] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
[ 0.333709] pci_bus 0000:3f: busn_res: can not insert [bus 3f] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[ 0.333712] PCI: pci_cache_line_size set to 64 bytes
[ 0.333785] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.333786] e820: reserve RAM buffer [mem 0xdfe70000-0xdfffffff]
[ 0.333880] NetLabel: Initializing
[ 0.333882] NetLabel: domain hash size = 128
[ 0.333882] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.333895] NetLabel: unlabeled traffic allowed by default
[ 0.333961] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 0.333967] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
[ 0.333971] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.336018] hpet: hpet2 irq 24 for MSI
[ 0.336055] hpet: hpet3 irq 25 for MSI
[ 0.336089] hpet: hpet4 irq 26 for MSI
[ 0.336125] hpet: hpet5 irq 27 for MSI
[ 0.336155] Switched to clocksource hpet
[ 0.341809] pnp: PnP ACPI init
[ 0.341884] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.341887] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.341948] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.342105] system 00:02: [io 0x0290-0x029f] has been reserved
[ 0.342108] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.342289] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.342291] system 00:03: [io 0x0800-0x087f] could not be reserved
[ 0.342293] system 00:03: [io 0x0500-0x057f] has been reserved
[ 0.342294] system 00:03: [io 0x0600-0x0607] has been reserved
[ 0.342297] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.342298] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.342300] system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.342302] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.342393] system 00:04: [mem 0xffc00000-0xffdfffff] has been reserved
[ 0.342396] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.342552] pnp 00:05: [dma 0 disabled]
[ 0.342595] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.342687] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.342690] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.342692] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.342770] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.342773] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.342919] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.342921] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.342923] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.342925] system 00:08: [mem 0x00100000-0xdfffffff] could not be reserved
[ 0.342927] system 00:08: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.342929] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.343026] pnp: PnP ACPI: found 9 devices
[ 0.349700] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 09] add_size 1000
[ 0.349703] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000
[ 0.349705] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 09] add_size 200000
[ 0.349712] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
[ 0.349714] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
[ 0.349716] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 200000
[ 0.349723] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000
[ 0.349725] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000
[ 0.349727] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000
[ 0.349733] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
[ 0.349735] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
[ 0.349737] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000
[ 0.349768] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.349770] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.349772] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.349774] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.349775] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.349777] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.349779] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.349781] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.349782] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.349784] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.349786] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.349787] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.349792] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe0000000-0xe01fffff]
[ 0.349796] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe0200000-0xe03fffff 64bit pref]
[ 0.349798] pci 0000:00:1c.1: BAR 14: assigned [mem 0xe0400000-0xe05fffff]
[ 0.349802] pci 0000:00:1c.1: BAR 15: assigned [mem 0xe0600000-0xe07fffff 64bit pref]
[ 0.349804] pci 0000:00:1c.2: BAR 14: assigned [mem 0xe0800000-0xe09fffff]
[ 0.349808] pci 0000:00:1c.2: BAR 15: assigned [mem 0xe0a00000-0xe0bfffff 64bit pref]
[ 0.349810] pci 0000:00:1c.3: BAR 14: assigned [mem 0xe0c00000-0xe0dfffff]
[ 0.349813] pci 0000:00:1c.3: BAR 15: assigned [mem 0xe0e00000-0xe0ffffff 64bit pref]
[ 0.349816] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.349818] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.349820] pci 0000:00:1c.2: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.349822] pci 0000:00:1c.3: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.349825] pci 0000:00:03.0: PCI bridge to [bus 01]
[ 0.349828] pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
[ 0.349831] pci 0000:00:03.0: bridge window [mem 0xf4000000-0xf7bfffff]
[ 0.349834] pci 0000:00:03.0: bridge window [mem 0xe4000000-0xefffffff 64bit pref]
[ 0.349837] pci 0000:00:1c.0: PCI bridge to [bus 09]
[ 0.349839] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.349843] pci 0000:00:1c.0: bridge window [mem 0xe0000000-0xe01fffff]
[ 0.349846] pci 0000:00:1c.0: bridge window [mem 0xe0200000-0xe03fffff 64bit pref]
[ 0.349851] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.349853] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.349857] pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe05fffff]
[ 0.349860] pci 0000:00:1c.1: bridge window [mem 0xe0600000-0xe07fffff 64bit pref]
[ 0.349864] pci 0000:00:1c.2: PCI bridge to [bus 07]
[ 0.349867] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.349870] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe09fffff]
[ 0.349874] pci 0000:00:1c.2: bridge window [mem 0xe0a00000-0xe0bfffff 64bit pref]
[ 0.349878] pci 0000:00:1c.3: PCI bridge to [bus 06]
[ 0.349881] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.349884] pci 0000:00:1c.3: bridge window [mem 0xe0c00000-0xe0dfffff]
[ 0.349887] pci 0000:00:1c.3: bridge window [mem 0xe0e00000-0xe0ffffff 64bit pref]
[ 0.349892] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.349896] pci 0000:00:1c.4: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.349902] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.349911] pci 0000:00:1c.6: PCI bridge to [bus 03]
[ 0.349913] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.349917] pci 0000:00:1c.6: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.349923] pci 0000:00:1c.7: PCI bridge to [bus 02]
[ 0.349925] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 0.349929] pci 0000:00:1c.7: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.349932] pci 0000:00:1c.7: bridge window [mem 0xf2f00000-0xf2ffffff 64bit pref]
[ 0.349937] pci 0000:00:1e.0: PCI bridge to [bus 0a]
[ 0.349939] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.349943] pci 0000:00:1e.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.349950] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.349951] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.349953] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.349954] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.349956] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff]
[ 0.349957] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfed8ffff]
[ 0.349959] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.349961] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf7bfffff]
[ 0.349962] pci_bus 0000:01: resource 2 [mem 0xe4000000-0xefffffff 64bit pref]
[ 0.349964] pci_bus 0000:09: resource 0 [io 0x1000-0x1fff]
[ 0.349965] pci_bus 0000:09: resource 1 [mem 0xe0000000-0xe01fffff]
[ 0.349967] pci_bus 0000:09: resource 2 [mem 0xe0200000-0xe03fffff 64bit pref]
[ 0.349969] pci_bus 0000:08: resource 0 [io 0x2000-0x2fff]
[ 0.349970] pci_bus 0000:08: resource 1 [mem 0xe0400000-0xe05fffff]
[ 0.349972] pci_bus 0000:08: resource 2 [mem 0xe0600000-0xe07fffff 64bit pref]
[ 0.349973] pci_bus 0000:07: resource 0 [io 0x3000-0x3fff]
[ 0.349975] pci_bus 0000:07: resource 1 [mem 0xe0800000-0xe09fffff]
[ 0.349976] pci_bus 0000:07: resource 2 [mem 0xe0a00000-0xe0bfffff 64bit pref]
[ 0.349978] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
[ 0.349979] pci_bus 0000:06: resource 1 [mem 0xe0c00000-0xe0dfffff]
[ 0.349981] pci_bus 0000:06: resource 2 [mem 0xe0e00000-0xe0ffffff 64bit pref]
[ 0.349983] pci_bus 0000:05: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 0.349984] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.349986] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.349988] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.349989] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.349991] pci_bus 0000:02: resource 2 [mem 0xf2f00000-0xf2ffffff 64bit pref]
[ 0.349992] pci_bus 0000:0a: resource 0 [io 0xe000-0xefff]
[ 0.349994] pci_bus 0000:0a: resource 1 [mem 0xf7f00000-0xf7ffffff]
[ 0.349995] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
[ 0.349997] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff]
[ 0.349998] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.350000] pci_bus 0000:0a: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.350001] pci_bus 0000:0a: resource 8 [mem 0xe0000000-0xf7ffffff]
[ 0.350003] pci_bus 0000:0a: resource 9 [mem 0xfc000000-0xfed8ffff]
[ 0.350005] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
[ 0.350007] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.350036] NET: Registered protocol family 2
[ 0.350230] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.350469] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.350807] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.350836] TCP: reno registered
[ 0.350849] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.350906] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.351010] NET: Registered protocol family 1
[ 0.351339] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.351488] PCI: CLS 32 bytes, default 64
[ 0.351533] Unpacking initramfs...
[ 0.583264] Freeing initrd memory: 17052K (ffff880035ea3000 - ffff880036f4a000)
[ 0.583282] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.583284] software IO TLB [mem 0xdbe70000-0xdfe70000] (64MB) mapped at [ffff8800dbe70000-ffff8800dfe6ffff]
[ 0.583527] microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x7
[ 0.583533] microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x7
[ 0.583539] microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x7
[ 0.583545] microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x7
[ 0.583596] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.584304] futex hash table entries: 4096 (order: 6, 262144 bytes)
[ 0.584359] Initialise system trusted keyring
[ 0.584382] audit: initializing netlink subsys (disabled)
[ 0.584396] audit: type=2000 audit(1425373014.368:1): initialized
[ 0.584698] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.585987] zpool: loaded
[ 0.585989] zbud: loaded
[ 0.586163] VFS: Disk quotas dquot_6.5.2
[ 0.586198] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.586529] msgmni has been set to 15958
[ 0.586585] Key type big_key registered
[ 0.586588] SELinux: Registering netfilter hooks
[ 0.587451] alg: No test for stdrng (krng)
[ 0.587460] NET: Registered protocol family 38
[ 0.587467] Key type asymmetric registered
[ 0.587469] Asymmetric key parser 'x509' registered
[ 0.587502] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.587541] io scheduler noop registered
[ 0.587543] io scheduler deadline registered
[ 0.587570] io scheduler cfq registered (default)
[ 0.587789] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.587879] pcieport 0000:00:1c.1: enabling device (0104 -> 0107)
[ 0.587966] pcieport 0000:00:1c.2: enabling device (0104 -> 0107)
[ 0.588057] pcieport 0000:00:1c.3: enabling device (0104 -> 0107)
[ 0.588461] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.588475] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.588515] intel_idle: MWAIT substates: 0x1120
[ 0.588520] intel_idle: v0.4 model 0x1E
[ 0.588521] intel_idle: lapic_timer_reliable_states 0x2
[ 0.588707] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.588710] ACPI: Power Button [PWRB]
[ 0.588743] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.588745] ACPI: Power Button [PWRF]
[ 0.588921] GHES: HEST is not enabled!
[ 0.588994] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.609594] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.610033] Non-volatile memory driver v1.3
[ 0.610036] Linux agpgart interface v0.103
[ 0.610172] ahci 0000:03:00.0: version 3.0
[ 0.620618] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.620626] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.621296] scsi host0: ahci
[ 0.621938] scsi host1: ahci
[ 0.622039] ata1: SATA max UDMA/133 abar m8192@0xf7dfe000 port 0xf7dfe100 irq 18
[ 0.622044] ata2: SATA max UDMA/133 abar m8192@0xf7dfe000 port 0xf7dfe180 irq 18
[ 0.622085] ata_piix 0000:00:1f.2: version 2.13
[ 0.622159] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.623295] scsi host2: ata_piix
[ 0.623632] scsi host3: ata_piix
[ 0.623730] ata3: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 21
[ 0.623734] ata4: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 21
[ 0.623810] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.624831] scsi host4: ata_piix
[ 0.625226] scsi host5: ata_piix
[ 0.625309] ata5: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 21
[ 0.625314] ata6: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 21
[ 0.625404] libphy: Fixed MDIO Bus: probed
[ 0.625562] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 0.625668] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 1
[ 0.625853] xhci_hcd 0000:05:00.0: irq 29 for MSI/MSI-X
[ 0.625858] xhci_hcd 0000:05:00.0: irq 30 for MSI/MSI-X
[ 0.625862] xhci_hcd 0000:05:00.0: irq 31 for MSI/MSI-X
[ 0.625866] xhci_hcd 0000:05:00.0: irq 32 for MSI/MSI-X
[ 0.625870] xhci_hcd 0000:05:00.0: irq 33 for MSI/MSI-X
[ 0.626532] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.626538] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.626542] usb usb1: Product: xHCI Host Controller
[ 0.626546] usb usb1: Manufacturer: Linux 3.18.7-200.fc21.x86_64 xhci-hcd
[ 0.626549] usb usb1: SerialNumber: 0000:05:00.0
[ 0.627036] hub 1-0:1.0: USB hub found
[ 0.627122] hub 1-0:1.0: 2 ports detected
[ 0.627626] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 0.627851] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
[ 0.629193] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.629195] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.629197] usb usb2: Product: xHCI Host Controller
[ 0.629198] usb usb2: Manufacturer: Linux 3.18.7-200.fc21.x86_64 xhci-hcd
[ 0.629200] usb usb2: SerialNumber: 0000:05:00.0
[ 0.629415] hub 2-0:1.0: USB hub found
[ 0.629427] hub 2-0:1.0: 2 ports detected
[ 0.629557] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.629563] ehci-pci: EHCI PCI platform driver
[ 0.629648] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.629821] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.629840] ehci-pci 0000:00:1a.0: debug port 2
[ 0.633779] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
[ 0.633791] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf3ffe000
[ 0.639612] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.639678] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.639683] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.639687] usb usb3: Product: EHCI Host Controller
[ 0.639690] usb usb3: Manufacturer: Linux 3.18.7-200.fc21.x86_64 ehci_hcd
[ 0.639694] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.640028] hub 3-0:1.0: USB hub found
[ 0.640034] hub 3-0:1.0: 2 ports detected
[ 0.640204] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.640406] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.640425] ehci-pci 0000:00:1d.0: debug port 2
[ 0.644346] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
[ 0.644359] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3ffd000
[ 0.649623] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.649690] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.649695] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.649698] usb usb4: Product: EHCI Host Controller
[ 0.649702] usb usb4: Manufacturer: Linux 3.18.7-200.fc21.x86_64 ehci_hcd
[ 0.649705] usb usb4: SerialNumber: 0000:00:1d.0
[ 0.650038] hub 4-0:1.0: USB hub found
[ 0.650043] hub 4-0:1.0: 2 ports detected
[ 0.650135] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.650141] ohci-pci: OHCI PCI platform driver
[ 0.650151] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.650192] usbcore: registered new interface driver usbserial
[ 0.650197] usbcore: registered new interface driver usbserial_generic
[ 0.650204] usbserial: USB Serial support registered for generic
[ 0.650230] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.652824] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.652829] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.653073] mousedev: PS/2 mouse device common for all mice
[ 0.653988] rtc_cmos 00:01: RTC can wake from S4
[ 0.654281] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.654321] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.654405] device-mapper: uevent: version 1.0.3
[ 0.654683] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
[ 0.655300] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.655401] usbcore: registered new interface driver usbhid
[ 0.655402] usbhid: USB HID core driver
[ 0.655453] drop_monitor: Initializing network drop monitor service
[ 0.655558] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.655930] TCP: cubic registered
[ 0.655935] Initializing XFRM netlink socket
[ 0.656028] NET: Registered protocol family 10
[ 0.656211] mip6: Mobile IPv6
[ 0.656214] NET: Registered protocol family 17
[ 0.657266] Loading compiled-in X.509 certificates
[ 0.658240] Loaded X.509 cert 'Fedora kernel signing key: c406af3b4a8ec27de35610fad348e54ba39e284a'
[ 0.658255] registered taskstats version 1
[ 0.658952] Magic number: 7:941:926
[ 0.659195] rtc_cmos 00:01: setting system clock to 2015-03-03 08:56:54 UTC (1425373014)
[ 0.659238] PM: Hibernation image not present or could not be loaded.
[ 0.927006] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.927045] ata2: SATA link down (SStatus 0 SControl 300)
[ 0.941921] ata6: SATA link down (SStatus 0 SControl 300)
[ 0.941935] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 0.951984] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.056733] usb 3-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.056739] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.057259] hub 3-1:1.0: USB hub found
[ 1.057455] hub 3-1:1.0: 6 ports detected
[ 1.066869] usb 4-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.066875] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.067152] hub 4-1:1.0: USB hub found
[ 1.067254] hub 4-1:1.0: 8 ports detected
[ 1.082161] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.085384] ata5.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
[ 1.107345] ata5.00: configured for UDMA/100
[ 1.344711] usb 4-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.385566] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.385577] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 1.385693] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.385704] ata4.01: SATA link down (SStatus 0 SControl 300)
[ 1.389079] ata3.00: ATA-8: ST3500418AS, CC38, max UDMA/133
[ 1.389085] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.389425] ata4.00: ATA-8: WDC WD10EARS-00MVWB0, 51.0AB51, max UDMA/133
[ 1.389431] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.393435] ata4.00: configured for UDMA/133
[ 1.394935] ata3.00: configured for UDMA/133
[ 1.395367] scsi 2:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5
[ 1.396090] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.396138] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.396453] sd 2:0:0:0: [sda] Write Protect is off
[ 1.396457] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.396605] scsi 3:0:0:0: Direct-Access ATA WDC WD10EARS-00M AB51 PQ: 0 ANSI: 5
[ 1.396626] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.397048] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.397054] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[ 1.397077] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 1.397203] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.397205] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.397383] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.401545] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN02 PQ: 0 ANSI: 5
[ 1.418396] sdb:
[ 1.419028] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.424387] usb 4-1.1: New USB device found, idVendor=046d, idProduct=c52b
[ 1.424393] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.424397] usb 4-1.1: Product: USB Receiver
[ 1.424401] usb 4-1.1: Manufacturer: Logitech
[ 1.434182] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.434188] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.434316] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.434402] sr 4:0:0:0: Attached scsi generic sg2 type 5
[ 1.435420] sda: sda1 sda2 sda3 sda4 < sda5 >
[ 1.437446] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.438820] Freeing unused kernel memory: 1500K (ffffffff81d36000 - ffffffff81ead000)
[ 1.438822] Write protecting the kernel read-only data: 12288k
[ 1.440552] Freeing unused kernel memory: 588K (ffff88000176d000 - ffff880001800000)
[ 1.442385] Freeing unused kernel memory: 820K (ffff880001b33000 - ffff880001c00000)
[ 1.443992] random: systemd urandom read with 40 bits of entropy available
[ 1.506621] usb 4-1.3: new low-speed USB device number 4 using ehci-pci
[ 1.585646] tsc: Refined TSC clocksource calibration: 2808.713 MHz
[ 1.587891] usb 4-1.3: New USB device found, idVendor=046d, idProduct=c062
[ 1.587894] usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.587896] usb 4-1.3: Product: USB Laser Mouse
[ 1.587897] usb 4-1.3: Manufacturer: Logitech
[ 1.593804] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.0/0003:046D:C062.0004/input/input5
[ 1.593984] hid-generic 0003:046D:C062.0004: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.0-1.3/input0
[ 1.614226] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 1.614819] scsi host6: pata_jmicron
[ 1.614910] scsi host7: pata_jmicron
[ 1.614954] ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 19
[ 1.614955] ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 19
[ 1.625344] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.625352] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.625527] r8169 0000:02:00.0: irq 34 for MSI/MSI-X
[ 1.625712] r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0xffffc90004ec6000, bc:ae:c5:04:c0:26, XID 083000c0 IRQ 34
[ 1.625714] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.639718] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 1.666900] usb 4-1.4: new full-speed USB device number 5 using ehci-pci
[ 1.676775] firewire_ohci 0000:0a:04.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.758321] usb 4-1.4: New USB device found, idVendor=045e, idProduct=028e
[ 1.758324] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.758326] usb 4-1.4: Product: Controller
[ 1.758328] usb 4-1.4: Manufacturer: ©Microsoft Corporation
[ 1.758329] usb 4-1.4: SerialNumber: 39BAE5B
[ 1.834240] usb 4-1.5: new low-speed USB device number 6 using ehci-pci
[ 1.847624] random: nonblocking pool is initialized
[ 1.927043] usb 4-1.5: New USB device found, idVendor=1113, idProduct=3163
[ 1.927046] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.927048] usb 4-1.5: Product: MEDION MD 86360
[ 1.927050] usb 4-1.5: Manufacturer: SYSGRATION
[ 1.931088] input: SYSGRATION MEDION MD 86360 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/0003:1113:3163.0005/input/input6
[ 1.931278] hid-generic 0003:1113:3163.0005: input,hidraw1: USB HID v1.00 Keyboard [SYSGRATION MEDION MD 86360] on usb-0000:00:1d.0-1.5/input0
[ 1.937403] input: SYSGRATION MEDION MD 86360 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.1/0003:1113:3163.0006/input/input7
[ 1.937981] hid-generic 0003:1113:3163.0006: input,hiddev0,hidraw2: USB HID v1.00 Mouse [SYSGRATION MEDION MD 86360] on usb-0000:00:1d.0-1.5/input1
[ 1.943924] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input2
[ 1.996911] input: Logitech Unifying Device. Wireless PID:4008 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.2/0003:046D:C52B.0003/0003:046D:C52B.0007/input/input8
[ 1.997037] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4008] on usb-0000:00:1d.0-1.1:1
[ 2.004813] input: Logitech Unifying Device. Wireless PID:4003 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.2/0003:046D:C52B.0003/0003:046D:C52B.0008/input/input9
[ 2.005047] logitech-djdevice 0003:046D:C52B.0008: input,hidraw5: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4003] on usb-0000:00:1d.0-1.1:2
[ 2.008151] PM: Starting manual resume from disk
[ 2.008155] PM: Hibernation image partition 8:3 present
[ 2.008156] PM: Looking for hibernation image.
[ 2.018832] PM: Image not found (code -22)
[ 2.018834] PM: Hibernation image not present or could not be loaded.
[ 2.080724] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.178411] firewire_core 0000:0a:04.0: created device fw0: GUID 001fc6000005cec6, S400
[ 2.397837] systemd-journald[124]: Received SIGTERM from PID 1 (systemd).
[ 2.587227] Switched to clocksource tsc
[ 2.740200] audit: type=1404 audit(1425373016.577:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 2.807499] SELinux: 2048 avtab hash slots, 104708 rules.
[ 2.823964] SELinux: 2048 avtab hash slots, 104708 rules.
[ 2.850149] SELinux: 8 users, 103 roles, 4987 types, 295 bools, 1 sens, 1024 cats
[ 2.850152] SELinux: 83 classes, 104708 rules
[ 2.854273] SELinux: Permission audit_read in class capability2 not defined in policy.
[ 2.854278] SELinux: the above unknown classes and permissions will be allowed
[ 2.854281] SELinux: Completing initialization.
[ 2.854282] SELinux: Setting up existing superblocks.
[ 2.854286] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 2.854295] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 2.854299] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 2.854349] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 2.854361] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[ 2.854851] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 2.855922] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 2.855924] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 2.855928] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 2.855930] SELinux: initialized (dev aio, type aio), not configured for labeling
[ 2.855932] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 2.855945] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 2.855950] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 2.855955] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 2.855964] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 2.856275] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[ 2.856277] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 2.856282] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 2.856345] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 2.856371] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 2.856375] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
[ 2.856377] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 2.856378] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 2.856380] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 2.856386] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 2.856389] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 2.856390] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 2.856392] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 2.856397] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 2.856399] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 2.856401] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[ 2.856408] SELinux: initialized (dev sda2, type ext4), uses xattr
[ 2.860553] audit: type=1403 audit(1425373016.697:3): policy loaded auid=4294967295 ses=4294967295
[ 2.889019] systemd[1]: Successfully loaded SELinux policy in 156.056ms.
[ 3.002923] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[ 3.029735] systemd[1]: Relabelled /dev and /run in 17.944ms.
[ 4.327767] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 4.419144] systemd-readahead[388]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[ 5.057047] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 5.057074] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 5.428463] RPC: Registered named UNIX socket transport module.
[ 5.428465] RPC: Registered udp transport module.
[ 5.428466] RPC: Registered tcp transport module.
[ 5.428467] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.428986] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
[ 6.111097] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 6.641992] systemd-journald[391]: Received request to flush runtime journal from PID 1
[ 6.689304] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 6.689948] SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
[ 10.826142] ATK0110 ATK0110:00: EC enabled
[ 10.984132] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.307104] EDAC MC: Ver: 3.0.0
[ 11.311270] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000084f (\PMRG) (20140926/utaddress-258)
[ 11.311275] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.311278] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000053f (\GPS1) (20140926/utaddress-258)
[ 11.311281] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000053f (\GPS0) (20140926/utaddress-258)
[ 11.311284] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.311285] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000053f (\GPS1) (20140926/utaddress-258)
[ 11.311287] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000053f (\GPS0) (20140926/utaddress-258)
[ 11.311289] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.311308] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 11.389674] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 11.434347] [drm] Initialized drm 1.1.0 20060810
[ 11.557435] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED)
[ 11.557471] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
[ 11.557477] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 11.698127] iTCO_vendor_support: vendor-support=0
[ 11.722278] gpio_ich: GPIO from 436 to 511 on gpio_ich
[ 11.770689] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 12.047637] snd_hda_intel 0000:00:1b.0: irq 35 for MSI/MSI-X
[ 12.047716] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 12.047723] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 12.058370] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 12.058393] iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0860)
[ 12.058618] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.067016] sound hdaudioC0D0: autoconfig: line_outs=4 (0x24/0x25/0x26/0x27/0x0) type:line
[ 12.067019] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.067021] sound hdaudioC0D0: hp_outs=1 (0x28/0x0/0x0/0x0/0x0)
[ 12.067022] sound hdaudioC0D0: mono: mono_out=0x0
[ 12.067023] sound hdaudioC0D0: dig-out=0x2d/0x2e
[ 12.067025] sound hdaudioC0D0: inputs:
[ 12.067027] sound hdaudioC0D0: Front Mic=0x29
[ 12.067028] sound hdaudioC0D0: Rear Mic=0x2b
[ 12.067030] sound hdaudioC0D0: Line=0x2a
[ 12.067031] sound hdaudioC0D0: CD=0x2c
[ 12.077394] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 12.077480] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 12.077935] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 12.078721] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 12.078899] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 12.078967] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 12.079045] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 12.079128] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 12.268413] nvidia: module license 'NVIDIA' taints kernel.
[ 12.268415] Disabling lock debugging due to kernel taint
[ 12.273431] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 12.278269] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 12.278493] SELinux: initialized (dev drm, type drm), not configured for labeling
[ 12.278676] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[ 12.278685] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.76 Thu Jan 22 12:11:08 PST 2015
[ 12.354203] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input18
[ 12.354281] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input19
[ 12.354364] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input20
[ 12.354435] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input21
[ 14.022100] Adding 8388604k swap on /dev/sda3. Priority:-1 extents:1 across:8388604k FS
[ 14.254237] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 14.254244] SELinux: initialized (dev sda5, type ext4), uses xattr
[ 14.278149] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 14.322516] SELinux: initialized (dev sda1, type ext4), uses xattr
[ 14.792579] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.4/4-1.4:1.0/input/input22
[ 14.792841] usbcore: registered new interface driver xpad
[ 15.422940] audit: type=1305 audit(1425369429.245:4): audit_pid=621 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
[ 16.841410] vboxdrv: Found 4 processor cores.
[ 16.841735] vboxdrv: fAsync=0 offMin=0x24f offMax=0x22ec
[ 16.841810] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 16.841811] vboxdrv: Successfully loaded version 4.3.22 (interface 0x001a0009).
[ 16.921232] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 16.937325] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 16.969409] Ebtables v2.0 registered
[ 16.984226] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 17.050994] vboxpci: IOMMU not found (not registered)
[ 17.265986] r8169 0000:02:00.0 enp2s0: link down
[ 17.265996] r8169 0000:02:00.0 enp2s0: link down
[ 19.310997] r8169 0000:02:00.0 enp2s0: link up
[ 24.976676] nvidia 0000:01:00.0: irq 36 for MSI/MSI-X
[ 26.013896] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 69.627542] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 90.888461] Bluetooth: Core ver 2.19
[ 90.888526] NET: Registered protocol family 31
[ 90.888527] Bluetooth: HCI device and connection manager initialized
[ 90.888535] Bluetooth: HCI socket layer initialized
[ 90.888537] Bluetooth: L2CAP socket layer initialized
[ 90.888542] Bluetooth: SCO socket layer initialized
[ 90.972221] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 90.972223] Bluetooth: BNEP filters: protocol multicast
[ 90.972230] Bluetooth: BNEP socket layer initialized
[ 91.108353] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 247.611805] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 881.703916] ACPI : EC: GPE storm detected(9 GPEs), transactions will use polling mode
[ 1517.828804] EXT4-fs (sdb): warning: maximal mount count reached, running e2fsck is recommended
[ 1517.832453] EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null)
[ 1517.832460] SELinux: initialized (dev sdb, type ext4), uses xattr
[ 1778.770464] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 1934.680948] perf interrupt took too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 2011.076021] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 2991.964745] usb 4-1.3: USB disconnect, device number 4
[ 2992.160890] usb 4-1.3: new low-speed USB device number 7 using ehci-pci
[ 2992.253255] usb 4-1.3: New USB device found, idVendor=046d, idProduct=c062
[ 2992.253262] usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2992.253266] usb 4-1.3: Product: USB Laser Mouse
[ 2992.253270] usb 4-1.3: Manufacturer: Logitech
[ 2992.259027] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.0/0003:046D:C062.0009/input/input23
[ 2992.259845] hid-generic 0003:046D:C062.0009: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.0-1.3/input0
[ 2993.246308] usb 4-1.3: USB disconnect, device number 7
[ 2993.442379] usb 4-1.3: new low-speed USB device number 8 using ehci-pci
[ 2993.534357] usb 4-1.3: New USB device found, idVendor=046d, idProduct=c062
[ 2993.534364] usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2993.534368] usb 4-1.3: Product: USB Laser Mouse
[ 2993.534372] usb 4-1.3: Manufacturer: Logitech
[ 2993.539784] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.0/0003:046D:C062.000A/input/input24
[ 2993.540569] hid-generic 0003:046D:C062.000A: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.0-1.3/input0
[ 2994.844946] usb 3-1.2: new high-speed USB device number 3 using ehci-pci
[ 2994.932310] usb 3-1.2: New USB device found, idVendor=04a9, idProduct=173b
[ 2994.932317] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2994.932321] usb 3-1.2: Product: MP270 series
[ 2994.932324] usb 3-1.2: Manufacturer: Canon
[ 2994.932328] usb 3-1.2: SerialNumber: 82F63D
[ 2994.998808] usblp 3-1.2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x173B
[ 2994.998832] usbcore: registered new interface driver usblp
[ 2996.117965] usblp0: removed
[ 2996.121635] usblp 3-1.2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x173B