Non aucun montage nfs (pour l'instant) j'ai vraiment réinstallé à neuf sans trop me soucier de tout remonter comme il faut mais je sais pas...
Hier :
* 2 passes complètes des barrettes de RAM : OK
* J'ai utilisé le 2.6.38 toute la journée l'ordinateur s'est éteint correctement.
* J'ai reforcé une vérification smart de tous les disques et refabriqué le RAID 1.
Ce matin : j'ai démarré sur le 2.6.40-4.fc15.x86_64 sans problème...
$ uname -a
Linux localhost.localdomain 2.6.40-4.fc15.x86_64 #1 SMP Fri Jul 29 18:46:53 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
Voici le dmesg :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.40-4.fc15.x86_64 (mockbuild@x86-13.phx2.fedoraproject.org) (gcc version 4.6.0 20110530 (Red Hat 4.6.0-9) (GCC) ) #1 SMP Fri Jul 29 18:46:53 UTC 2011
[ 0.000000] Command line: ro root=/dev/mapper/luks-50a6f858-78dc-4670-9126-f5d97c5a0198 rd_LUKS_UUID=luks-50a6f858-78dc-4670-9126-f5d97c5a0198 rd_MD_UUID=f3a7b548:2753fc3f:8451af62:0e43e585 rd_MD_UUID=1b98cce1:8fec6718:bfa733a7:49fbb48d rd_NO_LVM rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=fr rhgb quiet nouveau.modeset=0 rdblacklist=nouveau pcie_aspm=force
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000094c00 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf7d0000 (usable)
[ 0.000000] BIOS-e820: 00000000cf7d0000 - 00000000cf7d1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cf7d1000 - 00000000cf7e0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cf7e0000 - 00000000cf800000 (reserved)
[ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000430000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. P55-USB3/P55-USB3, BIOS F9 11/01/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x430000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 100000000 mask F00000000 write-back
[ 0.000000] 4 base 200000000 mask E00000000 write-back
[ 0.000000] 5 base 300000000 mask F00000000 write-back
[ 0.000000] 6 base 400000000 mask FC0000000 write-back
[ 0.000000] 7 base 430000000 mask FF0000000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 2, base: 3328MB, range: 256MB, type UC
[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 4, base: 8GB, range: 8GB, type WB
[ 0.000000] reg 5, base: 12GB, range: 4GB, type WB
[ 0.000000] reg 6, base: 16GB, range: 1GB, type WB
[ 0.000000] reg 7, base: 17152MB, range: 256MB, type UC
[ 0.000000] total RAM covered: 16384M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 7 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 4, base: 8GB, range: 8GB, type WB
[ 0.000000] reg 5, base: 16GB, range: 512MB, type WB
[ 0.000000] reg 6, base: 16896MB, range: 256MB, type WB
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcf7d0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f5620] f5620
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000008f000] 8f000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cf7d0000
[ 0.000000] 0000000000 - 00cf600000 page 2M
[ 0.000000] 00cf600000 - 00cf7d0000 page 4k
[ 0.000000] kernel direct mapping tables up to cf7d0000 @ cf7ca000-cf7d0000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000430000000
[ 0.000000] 0100000000 - 0430000000 page 2M
[ 0.000000] kernel direct mapping tables up to 430000000 @ 42ffee000-430000000
[ 0.000000] RAMDISK: 37187000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f7010 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cf7d1040 00044 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cf7d10c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cf7d1180 051FA (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000cf7d0000 00040
[ 0.000000] ACPI: HPET 00000000cf7d64c0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cf7d6540 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: EUDS 00000000cf7d6580 00560 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: MATS 00000000cf7d6ae0 00034 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: TAMG 00000000cf7d6b50 00A32 (v01 GBT GBT B0 5455312E BG?? 53450101)
[ 0.000000] ACPI: APIC 00000000cf7d63c0 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 00000000cf7d75c0 01CB8 (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000430000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000430000000
[ 0.000000] NODE_DATA [000000042ffda000 - 000000042ffedfff]
[ 0.000000] [ffffea0000000000-ffffea000ebfffff] PMD -> [ffff88041f600000-ffff88042d7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00430000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000094
[ 0.000000] 0: 0x00000100 -> 0x000cf7d0
[ 0.000000] 0: 0x00100000 -> 0x00430000
[ 0.000000] On node 0 totalpages: 4192084
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3911 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 831496 pages, LIFO batch:31
[ 0.000000] Normal zone: 45696 pages used for memmap
[ 0.000000] Normal zone: 3296640 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000094000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cf7d0000 - 00000000cf7d1000
[ 0.000000] PM: Registered nosave memory: 00000000cf7d1000 - 00000000cf7e0000
[ 0.000000] PM: Registered nosave memory: 00000000cf7e0000 - 00000000cf800000
[ 0.000000] PM: Registered nosave memory: 00000000cf800000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cf800000 (gap: cf800000:24800000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88042fc00000 s78720 r8192 d23680 u262144
[ 0.000000] pcpu-alloc: s78720 r8192 d23680 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4132047
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: ro root=/dev/mapper/luks-50a6f858-78dc-4670-9126-f5d97c5a0198 rd_LUKS_UUID=luks-50a6f858-78dc-4670-9126-f5d97c5a0198 rd_MD_UUID=f3a7b548:2753fc3f:8451af62:0e43e585 rd_MD_UUID=1b98cce1:8fec6718:bfa733a7:49fbb48d rd_NO_LVM rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=fr rhgb quiet nouveau.modeset=0 rdblacklist=nouveau pcie_aspm=force
[ 0.000000] PCIe ASPM is forcedly enabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16440836k/17563648k available (4868k kernel code, 795312k absent, 327500k reserved, 6735k data, 944k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 134217728 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 2798.299 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5596.59 BogoMIPS (lpj=2798299)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000031] Security Framework initialized
[ 0.000040] SELinux: Initializing.
[ 0.000047] SELinux: Starting in permissive mode
[ 0.001595] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.004964] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.006435] Mount-cache hash table entries: 256
[ 0.006561] Initializing cgroup subsys cpuacct
[ 0.006567] Initializing cgroup subsys memory
[ 0.006580] Initializing cgroup subsys devices
[ 0.006582] Initializing cgroup subsys freezer
[ 0.006583] Initializing cgroup subsys net_cls
[ 0.006585] Initializing cgroup subsys blkio
[ 0.006591] Initializing cgroup subsys perf_event
[ 0.006615] CPU: Physical Processor ID: 0
[ 0.006616] CPU: Processor Core ID: 0
[ 0.006620] mce: CPU supports 9 MCE banks
[ 0.006630] CPU0: Thermal monitoring enabled (TM1)
[ 0.006636] using mwait in idle threads.
[ 0.006972] ACPI: Core revision 20110413
[ 0.011763] ftrace: allocating 25296 entries in 100 pages
[ 0.018089] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.028066] CPU0: Intel(R) Core(TM) i5 CPU 760 @ 2.80GHz stepping 05
[ 0.129035] Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver.
[ 0.129041] ... version: 3
[ 0.129042] ... bit width: 48
[ 0.129043] ... generic registers: 4
[ 0.129044] ... value mask: 0000ffffffffffff
[ 0.129045] ... max period: 000000007fffffff
[ 0.129046] ... fixed-purpose events: 3
[ 0.129048] ... event mask: 000000070000000f
[ 0.129336] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.129409] Booting Node 0, Processors #1
[ 0.129411] smpboot cpu 1: start_ip = 8f000
[ 0.219917] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.220000] #2
[ 0.220001] smpboot cpu 2: start_ip = 8f000
[ 0.310620] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.310698] #3
[ 0.310699] smpboot cpu 3: start_ip = 8f000
[ 0.401412] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.401440] Brought up 4 CPUs
[ 0.401442] Total of 4 processors activated (22381.92 BogoMIPS).
[ 0.403607] devtmpfs: initialized
[ 0.407482] PM: Registering ACPI NVS region at cf7d0000 (4096 bytes)
[ 0.408050] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.408076] Time: 6:36:09 Date: 08/04/11
[ 0.408105] NET: Registered protocol family 16
[ 0.408238] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.408240] ACPI: bus type pci registered
[ 0.408299] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[ 0.408301] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[ 0.412866] PCI: Using configuration type 1 for base access
[ 0.413980] bio: create slab <bio-0> at 0
[ 0.414643] ACPI: EC: Look up EC in DSDT
[ 0.417637] ACPI Warning: Incorrect checksum in table [TAMG] - 0x10, should be 0x0F (20110413/tbutils-314)
[ 0.418168] ACPI: Interpreter enabled
[ 0.418170] ACPI: (supports S0 S3 S4 S5)
[ 0.418184] ACPI: Using IOAPIC for interrupt routing
[ 0.421570] ACPI: No dock devices found.
[ 0.421572] HEST: Table not found.
[ 0.421574] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.421619] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.421706] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.421708] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.421710] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.421712] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.421714] pci_root PNP0A03:00: host bridge window [mem 0xcf7f0000-0xfebfffff]
[ 0.421725] pci 0000:00:00.0: [8086:d131] type 0 class 0x000600
[ 0.421767] pci 0000:00:03.0: [8086:d138] type 1 class 0x000604
[ 0.421801] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.421804] pci 0000:00:03.0: PME# disabled
[ 0.421821] pci 0000:00:08.0: [8086:d155] type 0 class 0x000880
[ 0.421866] pci 0000:00:08.1: [8086:d156] type 0 class 0x000880
[ 0.421910] pci 0000:00:08.2: [8086:d157] type 0 class 0x000880
[ 0.421953] pci 0000:00:08.3: [8086:d158] type 0 class 0x000880
[ 0.421996] pci 0000:00:10.0: [8086:d150] type 0 class 0x000880
[ 0.422033] pci 0000:00:10.1: [8086:d151] type 0 class 0x000880
[ 0.422085] pci 0000:00:1a.0: [8086:3b3b] type 0 class 0x000c03
[ 0.422123] pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f]
[ 0.422162] pci 0000:00:1a.1: [8086:3b3e] type 0 class 0x000c03
[ 0.422200] pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f]
[ 0.422243] pci 0000:00:1a.2: [8086:3b3f] type 0 class 0x000c03
[ 0.422281] pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f]
[ 0.422327] pci 0000:00:1a.7: [8086:3b3c] type 0 class 0x000c03
[ 0.422346] pci 0000:00:1a.7: reg 10: [mem 0xfbfff000-0xfbfff3ff]
[ 0.422412] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.422415] pci 0000:00:1a.7: PME# disabled
[ 0.422436] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 0.422449] pci 0000:00:1b.0: reg 10: [mem 0xfbff8000-0xfbffbfff 64bit]
[ 0.422497] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.422500] pci 0000:00:1b.0: PME# disabled
[ 0.422516] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 0.422564] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.422568] pci 0000:00:1c.0: PME# disabled
[ 0.422585] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[ 0.422633] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.422636] pci 0000:00:1c.1: PME# disabled
[ 0.422653] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
[ 0.422701] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.422705] pci 0000:00:1c.2: PME# disabled
[ 0.422727] pci 0000:00:1d.0: [8086:3b36] type 0 class 0x000c03
[ 0.422765] pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f]
[ 0.422806] pci 0000:00:1d.1: [8086:3b37] type 0 class 0x000c03
[ 0.422843] pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f]
[ 0.422882] pci 0000:00:1d.2: [8086:3b38] type 0 class 0x000c03
[ 0.422920] pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f]
[ 0.422958] pci 0000:00:1d.3: [8086:3b39] type 0 class 0x000c03
[ 0.422996] pci 0000:00:1d.3: reg 20: [io 0xf900-0xf91f]
[ 0.423041] pci 0000:00:1d.7: [8086:3b34] type 0 class 0x000c03
[ 0.423060] pci 0000:00:1d.7: reg 10: [mem 0xfbffe000-0xfbffe3ff]
[ 0.423126] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.423130] pci 0000:00:1d.7: PME# disabled
[ 0.423146] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.423196] pci 0000:00:1f.0: [8086:3b02] type 0 class 0x000601
[ 0.423302] pci 0000:00:1f.2: [8086:2822] type 0 class 0x000104
[ 0.423318] pci 0000:00:1f.2: reg 10: [io 0xf800-0xf807]
[ 0.423325] pci 0000:00:1f.2: reg 14: [io 0xf700-0xf703]
[ 0.423332] pci 0000:00:1f.2: reg 18: [io 0xf600-0xf607]
[ 0.423339] pci 0000:00:1f.2: reg 1c: [io 0xf500-0xf503]
[ 0.423346] pci 0000:00:1f.2: reg 20: [io 0xf400-0xf41f]
[ 0.423353] pci 0000:00:1f.2: reg 24: [mem 0xfbffd000-0xfbffd7ff]
[ 0.423382] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.423385] pci 0000:00:1f.2: PME# disabled
[ 0.423401] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 0.423415] pci 0000:00:1f.3: reg 10: [mem 0xfbffc000-0xfbffc0ff 64bit]
[ 0.423433] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.423490] pci 0000:01:00.0: [10de:0a65] type 0 class 0x000300
[ 0.423499] pci 0000:01:00.0: reg 10: [mem 0xf9000000-0xf9ffffff]
[ 0.423508] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.423517] pci 0000:01:00.0: reg 1c: [mem 0xee000000-0xefffffff 64bit pref]
[ 0.423524] pci 0000:01:00.0: reg 24: [io 0xcf00-0xcf7f]
[ 0.423530] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.423568] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403
[ 0.423577] pci 0000:01:00.1: reg 10: [mem 0xfaffc000-0xfaffffff]
[ 0.425205] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.425208] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.425211] pci 0000:00:03.0: bridge window [mem 0xf9000000-0xfaffffff]
[ 0.425215] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
[ 0.425265] pci 0000:02:00.0: [197b:2363] type 0 class 0x000101
[ 0.425348] pci 0000:02:00.0: reg 24: [mem 0xfbefe000-0xfbefffff]
[ 0.425388] pci 0000:02:00.0: PME# supported from D3hot
[ 0.425393] pci 0000:02:00.0: PME# disabled
[ 0.425420] pci 0000:02:00.1: [197b:2363] type 0 class 0x000101
[ 0.425443] pci 0000:02:00.1: reg 10: [io 0xef00-0xef07]
[ 0.425455] pci 0000:02:00.1: reg 14: [io 0xee00-0xee03]
[ 0.425468] pci 0000:02:00.1: reg 18: [io 0xed00-0xed07]
[ 0.425481] pci 0000:02:00.1: reg 1c: [io 0xec00-0xec03]
[ 0.425493] pci 0000:02:00.1: reg 20: [io 0xeb00-0xeb0f]
[ 0.425561] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.425565] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.425568] pci 0000:00:1c.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.425573] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.425624] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[ 0.425639] pci 0000:03:00.0: reg 10: [io 0xde00-0xdeff]
[ 0.425665] pci 0000:03:00.0: reg 18: [mem 0xfbdff000-0xfbdfffff 64bit pref]
[ 0.425682] pci 0000:03:00.0: reg 20: [mem 0xfbdf8000-0xfbdfbfff 64bit pref]
[ 0.425728] pci 0000:03:00.0: supports D1 D2
[ 0.425729] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.425734] pci 0000:03:00.0: PME# disabled
[ 0.427201] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.427204] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.427208] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.427213] pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
[ 0.427270] pci 0000:04:00.0: [1033:0194] type 0 class 0x000c03
[ 0.427295] pci 0000:04:00.0: reg 10: [mem 0xfbcfe000-0xfbcfffff 64bit]
[ 0.427397] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.427402] pci 0000:04:00.0: PME# disabled
[ 0.429196] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 0.429200] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
[ 0.429203] pci 0000:00:1c.2: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.429208] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.429262] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.429266] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.429269] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.429274] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.429276] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.429278] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.429280] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.429282] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.429284] pci 0000:00:1e.0: bridge window [mem 0xcf7f0000-0xfebfffff] (subtractive decode)
[ 0.429303] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.429480] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.429515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.429541] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.429574] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.429654] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.429656] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.429658] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.440290] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.440327] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.440362] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.440399] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.440434] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.440472] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
[ 0.440508] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.440543] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.440619] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.440623] vgaarb: loaded
[ 0.440624] vgaarb: bridge control possible 0000:01:00.0
[ 0.440680] SCSI subsystem initialized
[ 0.440710] libata version 3.00 loaded.
[ 0.440750] usbcore: registered new interface driver usbfs
[ 0.440760] usbcore: registered new interface driver hub
[ 0.440776] usbcore: registered new device driver usb
[ 0.440824] PCI: Using ACPI for IRQ routing
[ 0.442109] PCI: Discovered peer bus 3f
[ 0.442135] pci 0000:3f:00.0: [8086:2c51] type 0 class 0x000600
[ 0.442153] pci 0000:3f:00.1: [8086:2c81] type 0 class 0x000600
[ 0.442169] pci 0000:3f:02.0: [8086:2c90] type 0 class 0x000600
[ 0.442183] pci 0000:3f:02.1: [8086:2c91] type 0 class 0x000600
[ 0.442199] pci 0000:3f:03.0: [8086:2c98] type 0 class 0x000600
[ 0.442212] pci 0000:3f:03.1: [8086:2c99] type 0 class 0x000600
[ 0.442227] pci 0000:3f:03.4: [8086:2c9c] type 0 class 0x000600
[ 0.442241] pci 0000:3f:04.0: [8086:2ca0] type 0 class 0x000600
[ 0.442257] pci 0000:3f:04.1: [8086:2ca1] type 0 class 0x000600
[ 0.442271] pci 0000:3f:04.2: [8086:2ca2] type 0 class 0x000600
[ 0.442285] pci 0000:3f:04.3: [8086:2ca3] type 0 class 0x000600
[ 0.442300] pci 0000:3f:05.0: [8086:2ca8] type 0 class 0x000600
[ 0.442314] pci 0000:3f:05.1: [8086:2ca9] type 0 class 0x000600
[ 0.442327] pci 0000:3f:05.2: [8086:2caa] type 0 class 0x000600
[ 0.442341] pci 0000:3f:05.3: [8086:2cab] type 0 class 0x000600
[ 0.442633] PCI: pci_cache_line_size set to 64 bytes
[ 0.442730] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.442732] reserve RAM buffer: 0000000000094c00 - 000000000009ffff
[ 0.442734] reserve RAM buffer: 00000000cf7d0000 - 00000000cfffffff
[ 0.442805] NetLabel: Initializing
[ 0.442807] NetLabel: domain hash size = 128
[ 0.442808] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.442819] NetLabel: unlabeled traffic allowed by default
[ 0.442854] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 0.442861] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
[ 0.442865] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.445152] hpet: hpet2 irq 40 for MSI
[ 0.445295] hpet: hpet3 irq 41 for MSI
[ 0.446269] hpet: hpet4 irq 42 for MSI
[ 0.446316] hpet: hpet5 irq 43 for MSI
[ 0.446342] Switching to clocksource hpet
[ 0.446362] Switched to NOHz mode on CPU #2
[ 0.446371] Switched to NOHz mode on CPU #3
[ 0.446373] Switched to NOHz mode on CPU #0
[ 0.446472] Switched to NOHz mode on CPU #1
[ 0.451922] pnp: PnP ACPI init
[ 0.451931] ACPI: bus type pnp registered
[ 0.451982] pnp 00:00: [bus 00-3f]
[ 0.451984] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.451986] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.451988] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.451989] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.451991] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.451993] pnp 00:00: [mem 0xcf7f0000-0xfebfffff window]
[ 0.452023] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.452091] pnp 00:01: [io 0x0010-0x001f]
[ 0.452092] pnp 00:01: [io 0x0022-0x003f]
[ 0.452094] pnp 00:01: [io 0x0044-0x005f]
[ 0.452095] pnp 00:01: [io 0x0062-0x0063]
[ 0.452097] pnp 00:01: [io 0x0065-0x006f]
[ 0.452098] pnp 00:01: [io 0x0074-0x007f]
[ 0.452100] pnp 00:01: [io 0x0091-0x0093]
[ 0.452101] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.452103] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.452104] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.452105] pnp 00:01: [io 0x0290-0x029f]
[ 0.452107] pnp 00:01: [io 0x0800-0x087f]
[ 0.452108] pnp 00:01: [io 0x0290-0x0294]
[ 0.452111] pnp 00:01: [io 0x0880-0x088f]
[ 0.452160] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.452163] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.452165] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.452167] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.452169] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.452171] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.452180] pnp 00:02: [dma 4]
[ 0.452182] pnp 00:02: [io 0x0000-0x000f]
[ 0.452183] pnp 00:02: [io 0x0080-0x0090]
[ 0.452185] pnp 00:02: [io 0x0094-0x009f]
[ 0.452186] pnp 00:02: [io 0x00c0-0x00df]
[ 0.452206] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.452243] pnp 00:03: [irq 0 disabled]
[ 0.452249] pnp 00:03: [irq 8]
[ 0.452250] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.452274] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.452295] pnp 00:04: [io 0x0070-0x0073]
[ 0.452317] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.452324] pnp 00:05: [io 0x0061]
[ 0.452343] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.452350] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.452355] pnp 00:06: [irq 13]
[ 0.452387] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.452573] pnp 00:07: [io 0x03f8-0x03ff]
[ 0.452578] pnp 00:07: [irq 4]
[ 0.452623] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.452770] pnp 00:08: [io 0x0378-0x037f]
[ 0.452775] pnp 00:08: [irq 7]
[ 0.452815] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.452904] pnp 00:09: [io 0x0400-0x047f]
[ 0.452906] pnp 00:09: [io 0x0580-0x05ff]
[ 0.452948] system 00:09: [io 0x0400-0x047f] has been reserved
[ 0.452951] system 00:09: [io 0x0580-0x05ff] has been reserved
[ 0.452953] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.453097] pnp 00:0a: [mem 0xf4000000-0xf7ffffff]
[ 0.453145] system 00:0a: [mem 0xf4000000-0xf7ffffff] has been reserved
[ 0.453148] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.453286] pnp 00:0b: [mem 0x000d8400-0x000dbfff]
[ 0.453288] pnp 00:0b: [mem 0x000f0000-0x000f7fff]
[ 0.453290] pnp 00:0b: [mem 0x000f8000-0x000fbfff]
[ 0.453292] pnp 00:0b: [mem 0x000fc000-0x000fffff]
[ 0.453293] pnp 00:0b: [mem 0xcf7d0000-0xcf7dffff]
[ 0.453295] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 0.453297] pnp 00:0b: [mem 0x00100000-0xcf7cffff]
[ 0.453298] pnp 00:0b: [mem 0xcf7e0000-0xcf7fffff]
[ 0.453301] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.453303] pnp 00:0b: [mem 0xfed10000-0xfed1dfff]
[ 0.453305] pnp 00:0b: [mem 0xfed20000-0xfed8ffff]
[ 0.453306] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.453308] pnp 00:0b: [mem 0xffb00000-0xffb7ffff]
[ 0.453309] pnp 00:0b: [mem 0xfff00000-0xffffffff]
[ 0.453311] pnp 00:0b: [mem 0x000e0000-0x000effff]
[ 0.453369] system 00:0b: [mem 0x000d8400-0x000dbfff] has been reserved
[ 0.453380] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.453382] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.453384] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.453387] system 00:0b: [mem 0xcf7d0000-0xcf7dffff] could not be reserved
[ 0.453389] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.453391] system 00:0b: [mem 0x00100000-0xcf7cffff] could not be reserved
[ 0.453393] system 00:0b: [mem 0xcf7e0000-0xcf7fffff] could not be reserved
[ 0.453395] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.453398] system 00:0b: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.453400] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.453402] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.453404] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.453406] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.453408] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
[ 0.453411] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.453430] pnp 00:0c: [mem 0xffb80000-0xffbfffff]
[ 0.453460] pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.453464] pnp: PnP ACPI: found 13 devices
[ 0.453465] ACPI: ACPI bus type pnp unregistered
[ 0.459227] PCI: max bus depth: 1 pci_try_num: 2
[ 0.459259] pci 0000:00:1c.2: BAR 15: assigned [mem 0xcf800000-0xcf9fffff 64bit pref]
[ 0.459262] pci 0000:00:1c.2: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.459265] pci 0000:00:1c.1: BAR 14: assigned [mem 0xcfa00000-0xcfdfffff]
[ 0.459268] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcfe00000-0xcfffffff 64bit pref]
[ 0.459270] pci 0000:01:00.0: BAR 6: assigned [mem 0xe0000000-0xe007ffff pref]
[ 0.459272] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.459275] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.459278] pci 0000:00:03.0: bridge window [mem 0xf9000000-0xfaffffff]
[ 0.459281] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
[ 0.459285] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.459287] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.459291] pci 0000:00:1c.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.459294] pci 0000:00:1c.0: bridge window [mem 0xcfe00000-0xcfffffff 64bit pref]
[ 0.459299] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.459302] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.459306] pci 0000:00:1c.1: bridge window [mem 0xcfa00000-0xcfdfffff]
[ 0.459309] pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
[ 0.459314] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 0.459316] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
[ 0.459320] pci 0000:00:1c.2: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.459324] pci 0000:00:1c.2: bridge window [mem 0xcf800000-0xcf9fffff 64bit pref]
[ 0.459328] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.459330] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.459334] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.459337] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.459349] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.459353] pci 0000:00:03.0: setting latency timer to 64
[ 0.459365] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.459368] pci 0000:00:1c.0: setting latency timer to 64
[ 0.459376] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.459380] pci 0000:00:1c.1: setting latency timer to 64
[ 0.459384] pci 0000:00:1c.2: enabling device (0006 -> 0007)
[ 0.459390] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.459393] pci 0000:00:1c.2: setting latency timer to 64
[ 0.459399] pci 0000:00:1e.0: setting latency timer to 64
[ 0.459402] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.459403] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.459405] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.459407] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.459409] pci_bus 0000:00: resource 8 [mem 0xcf7f0000-0xfebfffff]
[ 0.459410] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.459412] pci_bus 0000:01: resource 1 [mem 0xf9000000-0xfaffffff]
[ 0.459414] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
[ 0.459416] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.459417] pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.459419] pci_bus 0000:02: resource 2 [mem 0xcfe00000-0xcfffffff 64bit pref]
[ 0.459421] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.459422] pci_bus 0000:03: resource 1 [mem 0xcfa00000-0xcfdfffff]
[ 0.459424] pci_bus 0000:03: resource 2 [mem 0xfbd00000-0xfbdfffff 64bit pref]
[ 0.459426] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.459427] pci_bus 0000:04: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 0.459429] pci_bus 0000:04: resource 2 [mem 0xcf800000-0xcf9fffff 64bit pref]
[ 0.459431] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.459433] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.459434] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.459436] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.459438] pci_bus 0000:05: resource 8 [mem 0xcf7f0000-0xfebfffff]
[ 0.459440] pci_bus 0000:3f: resource 0 [io 0x0000-0xffff]
[ 0.459441] pci_bus 0000:3f: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.459464] NET: Registered protocol family 2
[ 0.459797] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.460866] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.463024] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.463280] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.463282] TCP reno registered
[ 0.463305] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.463431] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.463609] NET: Registered protocol family 1
[ 0.485318] pci 0000:01:00.0: Boot video device
[ 0.485375] PCI: CLS 64 bytes, default 64
[ 0.485411] Trying to unpack rootfs image as initramfs...
[ 0.733982] Freeing initrd memory: 14756k freed
[ 0.736148] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.736151] Placing 64MB software IO TLB between ffff8800cb7ca000 - ffff8800cf7ca000
[ 0.736153] software IO TLB at phys 0xcb7ca000 - 0xcf7ca000
[ 0.736690] Intel AES-NI instructions are not detected.
[ 0.736787] audit: initializing netlink socket (disabled)
[ 0.736796] type=2000 audit(1312439768.602:1): initialized
[ 0.772932] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.811565] VFS: Disk quotas dquot_6.5.2
[ 0.811607] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.812026] msgmni has been set to 32139
[ 0.812075] SELinux: Registering netfilter hooks
[ 0.812341] alg: No test for stdrng (krng)
[ 0.812347] NET: Registered protocol family 38
[ 0.812386] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.812407] io scheduler noop registered
[ 0.812408] io scheduler deadline registered
[ 0.812454] io scheduler cfq registered (default)
[ 0.812701] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.812720] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.812722] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.812973] intel_idle: MWAIT substates: 0x1120
[ 0.812980] intel_idle: v0.4 model 0x1E
[ 0.812981] intel_idle: lapic_timer_reliable_states 0x2
[ 0.813057] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.813061] ACPI: Power Button [PWRB]
[ 0.813097] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.813100] ACPI: Power Button [PWRF]
[ 0.813217] ACPI: acpi_idle yielding to intel_idle
[ 0.814849] ERST: Table is not found!
[ 0.814909] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.835391] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.889894] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.890190] Non-volatile memory driver v1.3
[ 0.890192] Linux agpgart interface v0.103
[ 0.891141] brd: module loaded
[ 0.891571] loop: module loaded
[ 0.891630] ahci 0000:00:1f.2: version 3.0
[ 0.891644] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.891677] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 0.891685] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
[ 0.891703] ahci: SSS flag set, parallel bus scan disabled
[ 0.902209] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
[ 0.902212] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pmp pio slum part ems apst
[ 0.902216] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.912522] scsi0 : ahci
[ 0.912590] scsi1 : ahci
[ 0.912638] scsi2 : ahci
[ 0.912688] scsi3 : ahci
[ 0.912737] scsi4 : ahci
[ 0.912785] scsi5 : ahci
[ 0.912891] ata1: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd100 irq 45
[ 0.912893] ata2: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd180 irq 45
[ 0.912896] ata3: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd200 irq 45
[ 0.912898] ata4: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd280 irq 45
[ 0.912900] ata5: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd300 irq 45
[ 0.912902] ata6: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd380 irq 45
[ 0.912928] ahci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.923155] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.923158] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.923163] ahci 0000:02:00.0: setting latency timer to 64
[ 0.923368] scsi6 : ahci
[ 0.923417] scsi7 : ahci
[ 0.923479] ata7: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe100 irq 16
[ 0.923482] ata8: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe180 irq 16
[ 0.923551] Fixed MDIO Bus: probed
[ 0.923588] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.923600] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.923610] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.923613] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.923650] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.923677] ehci_hcd 0000:00:1a.7: debug port 2
[ 0.927562] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.927574] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfff000
[ 0.937089] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.937105] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.937107] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.937109] usb usb1: Product: EHCI Host Controller
[ 0.937111] usb usb1: Manufacturer: Linux 2.6.40-4.fc15.x86_64 ehci_hcd
[ 0.937112] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.937188] hub 1-0:1.0: USB hub found
[ 0.937191] hub 1-0:1.0: 6 ports detected
[ 0.937258] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.937268] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.937270] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.937301] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.937321] ehci_hcd 0000:00:1d.7: debug port 2
[ 0.941197] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.941209] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbffe000
[ 0.951052] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.951081] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.951083] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.951085] usb usb2: Product: EHCI Host Controller
[ 0.951086] usb usb2: Manufacturer: Linux 2.6.40-4.fc15.x86_64 ehci_hcd
[ 0.951088] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.951157] hub 2-0:1.0: USB hub found
[ 0.951160] hub 2-0:1.0: 8 ports detected
[ 0.951226] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.951237] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.951255] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.951260] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.951262] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.951295] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.951318] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[ 0.951341] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.951344] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.951345] usb usb3: Product: UHCI Host Controller
[ 0.951347] usb usb3: Manufacturer: Linux 2.6.40-4.fc15.x86_64 uhci_hcd
[ 0.951349] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.951415] hub 3-0:1.0: USB hub found
[ 0.951418] hub 3-0:1.0: 2 ports detected
[ 0.951474] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.951481] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.951484] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.951520] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.951548] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
[ 0.951571] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.951573] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.951575] usb usb4: Product: UHCI Host Controller
[ 0.951577] usb usb4: Manufacturer: Linux 2.6.40-4.fc15.x86_64 uhci_hcd
[ 0.951578] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.951644] hub 4-0:1.0: USB hub found
[ 0.951647] hub 4-0:1.0: 2 ports detected
[ 0.951702] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.951706] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.951709] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.951739] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.951761] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
[ 0.951786] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.951788] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.951790] usb usb5: Product: UHCI Host Controller
[ 0.951791] usb usb5: Manufacturer: Linux 2.6.40-4.fc15.x86_64 uhci_hcd
[ 0.951793] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.951859] hub 5-0:1.0: USB hub found
[ 0.951862] hub 5-0:1.0: 2 ports detected
[ 0.951914] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.951919] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.951921] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.951949] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.951970] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
[ 0.951993] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.951995] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.951997] usb usb6: Product: UHCI Host Controller
[ 0.951999] usb usb6: Manufacturer: Linux 2.6.40-4.fc15.x86_64 uhci_hcd
[ 0.952000] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.952081] hub 6-0:1.0: USB hub found
[ 0.952084] hub 6-0:1.0: 2 ports detected
[ 0.952137] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.952142] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.952145] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.952173] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.952203] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
[ 0.952226] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.952228] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.952230] usb usb7: Product: UHCI Host Controller
[ 0.952232] usb usb7: Manufacturer: Linux 2.6.40-4.fc15.x86_64 uhci_hcd
[ 0.952233] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.952303] hub 7-0:1.0: USB hub found
[ 0.952306] hub 7-0:1.0: 2 ports detected
[ 0.952356] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.952360] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.952363] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.952392] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.952414] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
[ 0.952437] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.952439] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.952441] usb usb8: Product: UHCI Host Controller
[ 0.952443] usb usb8: Manufacturer: Linux 2.6.40-4.fc15.x86_64 uhci_hcd
[ 0.952444] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.952510] hub 8-0:1.0: USB hub found
[ 0.952513] hub 8-0:1.0: 2 ports detected
[ 0.952566] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.952570] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.952573] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.952604] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 9
[ 0.952627] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f900
[ 0.952651] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.952653] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.952655] usb usb9: Product: UHCI Host Controller
[ 0.952657] usb usb9: Manufacturer: Linux 2.6.40-4.fc15.x86_64 uhci_hcd
[ 0.952658] usb usb9: SerialNumber: 0000:00:1d.3
[ 0.952731] hub 9-0:1.0: USB hub found
[ 0.952734] hub 9-0:1.0: 2 ports detected
[ 0.952814] usbcore: registered new interface driver usbserial
[ 0.952821] USB Serial support registered for generic
[ 0.952832] usbcore: registered new interface driver usbserial_generic
[ 0.952833] usbserial: USB Serial Driver core
[ 0.952839] USB Serial support registered for GSM modem (1-port)
[ 0.952880] usbcore: registered new interface driver option
[ 0.952881] option: v0.7.2:USB Driver for GSM modems
[ 0.952914] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.987146] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 0.987148] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 1.229326] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.229359] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.236376] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.236429] mousedev: PS/2 mouse device common for all mice
[ 1.236537] rtc_cmos 00:04: RTC can wake from S4
[ 1.236631] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.236654] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.236727] device-mapper: uevent: version 1.0.3
[ 1.236784] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 1.236914] cpuidle: using governor ladder
[ 1.237047] cpuidle: using governor menu
[ 1.237163] EFI Variables Facility v0.08 2004-May-17
[ 1.237263] usbcore: registered new interface driver usbhid
[ 1.237264] usbhid: USB HID core driver
[ 1.237323] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.237334] TCP cubic registered
[ 1.237335] Initializing XFRM netlink socket
[ 1.237432] NET: Registered protocol family 10
[ 1.237553] Mobile IPv6
[ 1.237555] NET: Registered protocol family 17
[ 1.237563] Registering the dns_resolver key type
[ 1.237629] PM: Hibernation image not present or could not be loaded.
[ 1.237636] registered taskstats version 1
[ 1.253451] IMA: No TPM chip found, activating TPM-bypass!
[ 1.253842] Magic number: 7:526:619
[ 1.254037] rtc_cmos 00:04: setting system clock to 2011-08-04 06:36:10 UTC (1312439770)
[ 1.254063] Initializing network drop monitor service
[ 1.371063] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.372320] ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.372327] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.373631] ata1.00: configured for UDMA/133
[ 1.373887] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.374007] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.374209] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.374426] sd 0:0:0:0: [sda] Write Protect is off
[ 1.374432] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.374556] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.403505] sda: sda1 sda2 sda3 sda4 < sda5 >
[ 1.404291] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.545602] usb 5-1: new low speed USB device number 2 using uhci_hcd
[ 1.708857] usb 5-1: New USB device found, idVendor=0a81, idProduct=0101
[ 1.708863] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.708868] usb 5-1: Product: USB Keyboard
[ 1.708871] usb 5-1: Manufacturer: CHESEN
[ 1.725015] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input2
[ 1.725064] generic-usb 0003:0A81:0101.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:1a.2-1/input0
[ 1.735066] Refined TSC clocksource calibration: 2798.011 MHz.
[ 1.735074] Switching to clocksource tsc
[ 1.754826] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input3
[ 1.754905] generic-usb 0003:0A81:0101.0002: input,hidraw1: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:1a.2-1/input1
[ 1.832855] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.834037] ata2.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.834043] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.835280] ata2.00: configured for UDMA/133
[ 1.835608] scsi 1:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.835704] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.835760] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.836049] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.836054] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.836180] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.860925] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
[ 1.861541] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.960475] usb 5-2: new low speed USB device number 3 using uhci_hcd
[ 2.119716] usb 5-2: New USB device found, idVendor=0458, idProduct=003a
[ 2.119723] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.119727] usb 5-2: Product: Optical Mouse
[ 2.119731] usb 5-2: Manufacturer: Genius
[ 2.139973] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.146809] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input4
[ 2.146878] generic-usb 0003:0458:003A.0003: input,hidraw2: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:1a.2-2/input0
[ 2.352429] usb 7-1: new full speed USB device number 2 using uhci_hcd
[ 2.521087] usb 7-1: New USB device found, idVendor=0556, idProduct=0001
[ 2.521093] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.521098] usb 7-1: Product: AK5370
[ 2.521101] usb 7-1: Manufacturer: AKM
[ 2.598768] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.601884] ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
[ 2.605595] ata4.00: configured for UDMA/100
[ 2.617876] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN02 PQ: 0 ANSI: 5
[ 2.627693] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.627699] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.627842] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.627877] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 2.931859] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.236083] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.238201] Freeing unused kernel memory: 944k freed
[ 3.238307] Write protecting the kernel read-only data: 10240k
[ 3.242580] Freeing unused kernel memory: 1256k freed
[ 3.247864] Freeing unused kernel memory: 1628k freed
[ 3.274809] dracut: dracut-009-12.fc15
[ 3.287375] udev[121]: starting version 167
[ 3.354803] dracut: Starting plymouth daemon
[ 3.368980] dracut: rd.dm=0: removing DM RAID activation
[ 3.388915] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
[ 3.388923] pata_jmicron 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.388948] pata_jmicron 0000:02:00.1: setting latency timer to 64
[ 3.389576] scsi8 : pata_jmicron
[ 3.389834] scsi9 : pata_jmicron
[ 3.390252] ata9: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 17
[ 3.390255] ata10: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 17
[ 3.757183] dracut: Autoassembling MD Raid
[ 3.768162] md: md0 stopped.
[ 3.770094] md: bind<sda>
[ 3.770144] md: bind<sdb>
[ 3.770349] dracut: mdadm: Container /dev/md0 has been assembled with 2 drives
[ 3.779558] md: md127 stopped.
[ 3.779697] md: bind<sdb>
[ 3.779770] md: bind<sda>
[ 3.780823] md: raid1 personality registered for level 1
[ 3.780957] bio: create slab <bio-1> at 1
[ 3.781018] md/raid1:md127: not clean -- starting background reconstruction
[ 3.781021] md/raid1:md127: active with 2 out of 2 mirrors
[ 3.781037] md127: detected capacity change from 0 to 1000202043392
[ 3.782388] md127: p1 p2 p3 p4 < p5 >
[ 3.797670] md: md127 switched to read-write mode.
[ 3.797825] md: resync of RAID array md127
[ 3.797827] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 3.797829] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 3.797831] md: using 128k window, over a total of 976759940k.
[ 3.806634] dracut: mdadm: Started /dev/md127 with 2 devices
[ 4.265375] dracut: luksOpen /dev/md127p2 luks-50a6f858-78dc-4670-9126-f5d97c5a0198
[ 126.998959] Btrfs loaded
[ 127.000039] device fsid 095c5a0c-3cf4-49bd-b3ba-d1577d396c0a devid 1 transid 29407 /dev/dm-0
[ 127.021563] device fsid 095c5a0c-3cf4-49bd-b3ba-d1577d396c0a devid 1 transid 29407 /dev/mapper/luks-50a6f858-78dc-4670-9126-f5d97c5a0198
[ 127.415348] dracut: Checking filesystems
[ 127.415365] dracut: fsck -T -t noopts=_netdev -A -a
[ 127.416318] dracut:
[ 127.416428] dracut: Remounting /dev/mapper/luks-50a6f858-78dc-4670-9126-f5d97c5a0198 with -o ro,
[ 127.417448] device fsid 095c5a0c-3cf4-49bd-b3ba-d1577d396c0a devid 1 transid 29407 /dev/mapper/luks-50a6f858-78dc-4670-9126-f5d97c5a0198
[ 127.488902] dracut: Mounted root filesystem /dev/mapper/luks-50a6f858-78dc-4670-9126-f5d97c5a0198
[ 127.646487] dracut: Switching root
[ 128.523651] SELinux: 2048 avtab hash slots, 224252 rules.
[ 128.577857] SELinux: 2048 avtab hash slots, 224252 rules.
[ 128.802098] SELinux: 9 users, 13 roles, 3622 types, 192 bools, 1 sens, 1024 cats
[ 128.802100] SELinux: 81 classes, 224252 rules
[ 128.806918] SELinux: Completing initialization.
[ 128.806920] SELinux: Setting up existing superblocks.
[ 128.806925] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 128.806929] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 128.806939] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 128.806943] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 128.806951] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 128.806961] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[ 128.807507] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 128.807510] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 128.808017] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 128.808021] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 128.808024] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 128.808039] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 128.808050] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 128.808056] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 128.808065] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[ 128.808071] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[ 128.808074] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 128.808418] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 128.808424] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 128.808775] SELinux: initialized (dev dm-0, type btrfs), uses xattr
[ 128.812283] type=1403 audit(1312439898.397:2): policy loaded auid=4294967295 ses=4294967295
[ 128.964415] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 128.964918] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 129.057967] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 129.069277] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 129.069621] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 129.081247] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 129.090253] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 129.103091] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 129.103471] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 129.116128] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 129.116482] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 129.144130] systemd[1]: systemd 26 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
[ 129.187450] systemd[1]: Set hostname to <localhost.localdomain>.
[ 131.182857] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 131.183535] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 131.183947] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 131.186594] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 131.187112] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 131.844030] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 132.038565] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
[ 132.168245] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 132.724468] udev[649]: starting version 167
[ 133.231915] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 133.393554] microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x4
[ 133.393561] microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x4
[ 133.393568] microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x4
[ 133.393606] microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x4
[ 133.393884] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 133.482236] EDAC MC: Ver: 2.1.0
[ 133.531211] iTCO_vendor_support: vendor-support=0
[ 133.532425] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 133.532536] iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0460)
[ 133.532727] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 133.599059] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 133.599154] xhci_hcd 0000:04:00.0: setting latency timer to 64
[ 133.599159] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 133.599602] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 10
[ 133.599821] xhci_hcd 0000:04:00.0: irq 18, io mem 0xfbcfe000
[ 133.599906] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
[ 133.599911] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
[ 133.599915] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
[ 133.599918] xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
[ 133.599922] xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X
[ 133.600068] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[ 133.600070] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 133.600071] usb usb10: Product: xHCI Host Controller
[ 133.600073] usb usb10: Manufacturer: Linux 2.6.40-4.fc15.x86_64 xhci_hcd
[ 133.600074] usb usb10: SerialNumber: 0000:04:00.0
[ 133.600150] xHCI xhci_add_endpoint called for root hub
[ 133.600151] xHCI xhci_check_bandwidth called for root hub
[ 133.600171] hub 10-0:1.0: USB hub found
[ 133.600180] hub 10-0:1.0: 2 ports detected
[ 133.600241] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 133.600272] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 11
[ 133.603113] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
[ 133.603115] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 133.603117] usb usb11: Product: xHCI Host Controller
[ 133.603118] usb usb11: Manufacturer: Linux 2.6.40-4.fc15.x86_64 xhci_hcd
[ 133.603119] usb usb11: SerialNumber: 0000:04:00.0
[ 133.603186] xHCI xhci_add_endpoint called for root hub
[ 133.603187] xHCI xhci_check_bandwidth called for root hub
[ 133.603207] hub 11-0:1.0: USB hub found
[ 133.603216] hub 11-0:1.0: 2 ports detected
[ 133.698944] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3f:03.0
[ 133.698958] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3f:03.0' (POLLED)
[ 133.698960] EDAC i7core: Driver loaded.
[ 133.842611] parport_pc 00:08: reported by Plug and Play ACPI
[ 133.842661] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 133.875028] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 133.909379] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 133.909391] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 133.909481] r8169 0000:03:00.0: setting latency timer to 64
[ 133.909531] r8169 0000:03:00.0: irq 51 for MSI/MSI-X
[ 133.909650] r8169 0000:03:00.0: eth0: RTL8168e/8111e at 0xffffc9000660c000, 6c:f0:49:e3:ec:0e, XID 0c200000 IRQ 51
[ 133.942347] ppdev: user-space parallel port driver
[ 134.543373] nvidia: module license 'NVIDIA' taints kernel.
[ 134.543376] Disabling lock debugging due to kernel taint
[ 134.591696] md: export_rdev(sdb)
[ 134.591713] md: export_rdev(sda)
[ 134.616682] mtp-probe[929]: checking bus 5, device 2: "/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1"
[ 134.616690] mtp-probe[930]: checking bus 5, device 3: "/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-2"
[ 134.618614] mtp-probe[943]: checking bus 7, device 2: "/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-1"
[ 134.742355] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 134.742408] HDA Intel 0000:00:1b.0: irq 52 for MSI/MSI-X
[ 134.742429] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 134.860897] mtp-probe[930]: bus: 5, device: 3 was not an MTP device
[ 134.860904] mtp-probe[943]: bus: 7, device: 2 was not an MTP device
[ 134.860939] mtp-probe[929]: bus: 5, device: 2 was not an MTP device
[ 134.981484] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 134.981493] nvidia 0000:01:00.0: setting latency timer to 64
[ 134.981496] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 134.981861] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 275.09.07 Wed Jun 8 14:16:46 PDT 2011
[ 134.994010] ALSA sound/pci/hda/patch_realtek.c:1748 SKU: Nid=0x1d sku_cfg=0x4005e601
[ 134.994013] ALSA sound/pci/hda/patch_realtek.c:1750 SKU: port_connectivity=0x1
[ 134.994015] ALSA sound/pci/hda/patch_realtek.c:1751 SKU: enable_pcbeep=0x0
[ 134.994017] ALSA sound/pci/hda/patch_realtek.c:1752 SKU: check_sum=0x00000005
[ 134.994018] ALSA sound/pci/hda/patch_realtek.c:1753 SKU: customization=0x000000e6
[ 134.994020] ALSA sound/pci/hda/patch_realtek.c:1754 SKU: external_amp=0x0
[ 134.994022] ALSA sound/pci/hda/patch_realtek.c:1755 SKU: platform_type=0x0
[ 134.994023] ALSA sound/pci/hda/patch_realtek.c:1756 SKU: swap=0x0
[ 134.994025] ALSA sound/pci/hda/patch_realtek.c:1757 SKU: override=0x1
[ 134.998147] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 134.998150] hda_intel: Disabling MSI
[ 134.998213] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 135.003526] ALSA sound/pci/hda/hda_intel.c:1452 Enable delay in RIRB handling
[ 135.011684] systemd-cryptsetup[971]: Volume luks-50a6f858-78dc-4670-9126-f5d97c5a0198 already active.
[ 135.101753] Adding 16383996k swap on /dev/md127p3. Priority:0 extents:1 across:16383996k
[ 135.103242] ALSA sound/usb/mixer.c:794 3:0: cannot get min/max values for control 2 (id 3)
[ 135.103801] usbcore: registered new interface driver snd-usb-audio
[ 135.215789] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[ 135.250728] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[ 135.286561] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[ 135.319521] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[ 135.370713] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input5
[ 135.370768] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input6
[ 135.370826] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input7
[ 135.370879] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input8
[ 135.410586] systemd-fsck[974]: /dev/md127p1: clean, 89/64000 files, 24314/256000 blocks
[ 135.669072] systemd-cryptsetup[979]: Set cipher aes, mode xts-plain64, key size 512 bits for device /dev/disk/by-uuid/724bba88-da56-48ae-8638-a8ed7851ba78.
[ 135.859508] EXT4-fs (md127p1): mounted filesystem with ordered data mode. Opts: (null)
[ 135.859516] SELinux: initialized (dev md127p1, type ext4), uses xattr
[ 138.313551] systemd-fsck[1130]: /dev/mapper/luks-724bba88-da56-48ae-8638-a8ed7851ba78: clean, 292634/56762368 files, 29744787/227036928 blocks
[ 138.981465] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 138.981473] SELinux: initialized (dev dm-1, type ext4), uses xattr
[ 140.125145] /usr/sbin/gpm[1172]: *** info [daemon/startup.c(136)]:
[ 140.125152] /usr/sbin/gpm[1172]: Started gpm successfully. Entered daemon mode.
[ 140.383684] acpid[1192]: starting up with netlink and the input layer
[ 140.383986] acpid[1192]: skipping incomplete file /etc/acpi/events/videoconf
[ 140.383993] acpid[1192]: 1 rule loaded
[ 140.384126] acpid[1192]: waiting for events: event logging is off
[ 140.385563] abrtd[1171]: Unrecognized variable 'DumpLocation' in '/etc/abrt/abrt.conf'
[ 140.472366] ntpd[1174]: ntpd 4.2.6p3@1.2290-o Fri May 6 16:26:49 UTC 2011 (1)
[ 140.472542] ntpd[1174]: proto: precision = 0.036 usec
[ 140.472574] ntpd[1174]: 0.0.0.0 c01d 0d kern kernel time sync enabled
[ 140.472952] ntpd[1174]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
[ 140.473221] ntpd[1174]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
[ 140.474448] ntpd[1174]: Listen and drop on 1 v6wildcard :: UDP 123
[ 140.474789] ntpd[1174]: Listen normally on 2 lo 127.0.0.1 UDP 123
[ 140.474819] ntpd[1174]: Listen normally on 3 lo ::1 UDP 123
[ 140.474842] ntpd[1174]: peers refreshed
[ 140.475009] ntpd[1174]: Listening on routing socket on fd #20 for interface updates
[ 140.476830] ntpd[1174]: Deferring DNS for 0.fedora.pool.ntp.org 1
[ 140.477334] ntpd[1174]: Deferring DNS for 1.fedora.pool.ntp.org 1
[ 140.477494] ntpd[1174]: Deferring DNS for 2.fedora.pool.ntp.org 1
[ 140.477704] ntpd[1174]: Deferring DNS for 3.fedora.pool.ntp.org 1
[ 140.478181] ntpd[1174]: 0.0.0.0 c016 06 restart
[ 140.478189] ntpd[1174]: 0.0.0.0 c012 02 freq_set kernel -15.053 PPM
[ 140.478227] ntpd[1196]: signal_no_reset: signal 17 had flags 4000000
[ 140.548690] mcelog.setup[1194]: read: No such device
[ 140.608673] avahi-daemon[1173]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
[ 140.608831] avahi-daemon[1173]: Successfully dropped root privileges.
[ 140.609044] avahi-daemon[1173]: avahi-daemon 0.6.30 starting up.
[ 140.654691] mcelog[1205]: mcelog: Unsupported new Family 6 Model 1e CPU: only decoding architectural errors
[ 141.003669] /usr/sbin/crond[1190]: (CRON) INFO (running with inotify support)
[ 141.220177] dbus[1224]: avc: netlink poll: error 4
[ 141.222048] abrtd[1171]: Init complete, entering main loop
[ 141.222700] avahi-daemon[1173]: Successfully called chroot().
[ 141.222727] avahi-daemon[1173]: Successfully dropped remaining capabilities.
[ 141.222972] avahi-daemon[1173]: Loading service file /services/ssh.service.
[ 141.223072] avahi-daemon[1173]: Loading service file /services/udisks.service.
[ 141.223395] avahi-daemon[1173]: System host name is set to 'localhost'. This is not a suitable mDNS host name, looking for alternatives.
[ 141.223588] avahi-daemon[1173]: Network interface enumeration completed.
[ 141.223709] avahi-daemon[1173]: Registering HINFO record with values 'X86_64'/'LINUX'.
[ 141.223798] avahi-daemon[1173]: Server startup complete. Host name is linux.local. Local service cookie is 2792779016.
[ 141.223822] avahi-daemon[1173]: Service "linux" (/services/udisks.service) successfully established.
[ 141.223837] avahi-daemon[1173]: Service "linux" (/services/ssh.service) successfully established.
[ 141.298527] coretemp coretemp.0: TjMax is 99 C.
[ 141.298536] coretemp coretemp.0: TjMax is 99 C.
[ 141.298542] coretemp coretemp.0: TjMax is 99 C.
[ 141.298580] coretemp coretemp.0: TjMax is 99 C.
[ 141.576705] it87: Found IT8720F chip at 0x290, revision 8
[ 141.576762] it87: VID is disabled (pins used for GPIO)
[ 141.576772] it87: Routing internal VCCH to in7
[ 141.576776] it87: Beeping is supported
[ 141.675174] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 147.072027] r8169 0000:03:00.0: eth0: link down
[ 147.072032] r8169 0000:03:00.0: eth0: link down
[ 147.072962] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 148.676920] r8169 0000:03:00.0: eth0: link up
[ 148.677935] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 151.244753] RPC: Registered named UNIX socket transport module.
[ 151.244755] RPC: Registered udp transport module.
[ 151.244756] RPC: Registered tcp transport module.
[ 151.244757] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 151.297784] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
[ 151.723393] sshd (1439): /proc/1439/oom_adj is deprecated, please use /proc/1439/oom_score_adj instead.
[ 159.344642] eth0: no IPv6 routers present
[ 175.650072] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 175.827013] bootchart-collector started as pid 1620 with 2 args: '--dump' '/tmp/bootchart.5aSLVUdSyu'
[ 175.827017] Extracting profile data from pid 652
[ 175.827018] map 0x7fffdfbc1000 -> 0x7fffdfbe2000 size: 132k from '7fffdfbc1000' '7fffdfbe2000'
[ 175.827021] read 135168 bytes of 135168
[ 175.827022] reading 80 chunks (of 80) ... wrote 9752 kb
[ 175.827023] bootchart-collector pid: 1620 unmounted proc / clean exit
[ 225.504117] fuse init (API version 7.16)
[ 225.533610] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
[ 225.563675] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[ 250.583639] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
Au passage mes points de montage :
$ df -h
Filesystem Size Used Avail Use% Mounted on
rootfs 49G 21G 27G 44% /
udev 7.9G 8.0K 7.9G 1% /dev
tmpfs 7.9G 3.0M 7.9G 1% /dev/shm
tmpfs 7.9G 784K 7.9G 1% /run
/dev/mapper/luks-50a6f858-78dc-4670-9126-f5d97c5a0198
49G 21G 27G 44% /
tmpfs 7.9G 0 7.9G 0% /sys/fs/cgroup
tmpfs 7.9G 0 7.9G 0% /media
/dev/md127p1 985M 80M 856M 9% /boot
/dev/mapper/luks-724bba88-da56-48ae-8638-a8ed7851ba78
853G 100G 710G 13% /home
/dev/mapper/luks-50a6f858-78dc-4670-9126-f5d97c5a0198
49G 21G 27G 44% /tmp
/dev/mapper/luks-50a6f858-78dc-4670-9126-f5d97c5a0198
49G 21G 27G 44% /var/tmp
/dev/mapper/luks-724bba88-da56-48ae-8638-a8ed7851ba78
853G 100G 710G 13% /home
J'ai pas l'impression d'avoir un problème avec la carte graphique vu que les VM tournent sans problème mais sait-on jamais. Le xorg.conf :
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 270.41.06 (mockbuild@hephaestus.wilsonet.com) Sun May 1 15:55:36 EDT 2011
# RPM Fusion - nvidia-xorg.conf
#
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from data in "/etc/sysconfig/keyboard"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "fr"
Option "XkbModel" "pc105"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Idek Iiyama PL2271HD"
HorizSync 24.0 - 83.0
VertRefresh 55.0 - 76.0
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 210"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Videocard0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "1920x1080_60 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection