@chepioq : j'avais essayé aussi, sans succès.
@nouvo09 : à une époque, quand j'arrivais sous gnome, ca me métait systématiquement une erreur sur mon disque dur. Ca s'est arreté un jour, et ce n'est jamais revenu. J'ai fait le rapport smart, il semble qu'il y a des erreurs :
smartctl 5.39.1 2010-01-28 r3054 [x86_64-redhat-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Maxtor DiamondMax 22
Device Model: MAXTOR STM3320613AS
Serial Number: 9SZ4TZPP
Firmware Version: MC1H
User Capacity: 320 072 933 376 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Tue Sep 7 21:55:16 2010 CEST
==> WARNING: There are known problems with these drives,
see the following Seagate web pages:
http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=207931
http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=207969
http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=207975
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 609) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 68) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail Always - 146674485
3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 674
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 075 060 030 Pre-fail Always - 34903246
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 2406
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 814
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 087 087 000 Old_age Always - 13
188 Command_Timeout 0x0032 100 093 000 Old_age Always - 1406
189 High_Fly_Writes 0x003a 090 090 000 Old_age Always - 10
190 Airflow_Temperature_Cel 0x0022 059 053 045 Old_age Always - 41 (Lifetime Min/Max 22/43)
194 Temperature_Celsius 0x0022 041 047 000 Old_age Always - 41 (0 13 0 0)
195 Hardware_ECC_Recovered 0x001a 056 034 000 Old_age Always - 146674485
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 98779952843101
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2903843963
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 629497861
SMART Error Log Version: 1
ATA Error Count: 12 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 12 occurred at disk power-on lifetime: 402 hours (16 days + 18 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 ff ff ff ef 00 1d+08:21:58.643 READ DMA EXT
27 00 00 00 00 00 e0 00 1d+08:21:58.614 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 1d+08:21:58.591 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 1d+08:21:58.573 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 1d+08:21:58.461 READ NATIVE MAX ADDRESS EXT
Error 11 occurred at disk power-on lifetime: 402 hours (16 days + 18 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 ff ff ff ef 00 1d+08:21:55.730 READ DMA EXT
27 00 00 00 00 00 e0 00 1d+08:21:55.702 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 1d+08:21:55.683 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 1d+08:21:55.664 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 1d+08:21:55.613 READ NATIVE MAX ADDRESS EXT
Error 10 occurred at disk power-on lifetime: 402 hours (16 days + 18 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 ff ff ff ef 00 1d+08:21:52.794 READ DMA EXT
27 00 00 00 00 00 e0 00 1d+08:21:52.765 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 1d+08:21:52.747 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 1d+08:21:52.727 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 1d+08:21:52.622 READ NATIVE MAX ADDRESS EXT
Error 9 occurred at disk power-on lifetime: 402 hours (16 days + 18 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 ff ff ff ef 00 1d+08:21:49.866 READ DMA EXT
27 00 00 00 00 00 e0 00 1d+08:21:49.837 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 1d+08:21:49.818 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 1d+08:21:49.800 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 1d+08:21:49.748 READ NATIVE MAX ADDRESS EXT
Error 8 occurred at disk power-on lifetime: 402 hours (16 days + 18 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 ff ff ff ef 00 1d+08:21:46.940 READ DMA EXT
27 00 00 00 00 00 e0 00 1d+08:21:46.911 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 1d+08:21:46.889 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 1d+08:21:46.870 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 1d+08:21:46.750 READ NATIVE MAX ADDRESS EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 550 -
# 2 Extended offline Completed: read failure 40% 403 435058100
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Mais je ne sais pas ce qu'elles veulent dire. En tout cas ca semblerait une cause probable. Par contre sur le meme pc j'ai un XP, qui est sur le meme disque que linux d'ailleurs, et je boot sans problemes.
epo