Voila se que sa me donne
lsmod
Module Size Used by
vfat 11969 1
fat 47709 1 vfat
ppdev 8645 0
autofs4 19013 1
hidp 15937 2
rfcomm 34517 0
l2cap 23617 10 hidp,rfcomm
bluetooth 44069 3 hidp,rfcomm,l2cap
sunrpc 136573 1
ip_conntrack_netbios_ns 3009 0
ipt_REJECT 5441 1
xt_state 2241 5
ip_conntrack 49261 2 ip_conntrack_netbios_ns,xt_state
nfnetlink 6489 1 ip_conntrack
xt_tcpudp 3265 7
iptable_filter 3137 1
ip_tables 11657 1 iptable_filter
x_tables 12613 4 ipt_REJECT,xt_state,xt_tcpudp,ip_tables
video 14917 0
button 6609 0
battery 9285 0
ac 4933 0
sd_mod 16577 2
sg 32349 0
ipv6 225569 12
lp 12297 0
usb_storage 62497 1
parport_pc 25445 1
scsi_mod 125289 3 sd_mod,sg,usb_storage
parport 34313 3 ppdev,lp,parport_pc
floppy 57733 0
nvram 8393 0
ohci_hcd 19805 0
snd_intel8x0 30301 1
snd_ac97_codec 83937 1 snd_intel8x0
snd_ac97_bus 2497 1 snd_ac97_codec
snd_seq_dummy 3781 0
snd_seq_oss 28993 0
snd_seq_midi_event 7105 1 snd_seq_oss
snd_seq 47153 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 8909 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 45009 0
snd_mixer_oss 16449 1 snd_pcm_oss
snd_pcm 76869 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 22597 2 snd_seq,snd_pcm
8139too 25409 0
snd 50501 11 snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
i2c_sis96x 5573 0
8139cp 21185 0
mii 5313 2 8139too,8139cp
i2c_core 20673 1 i2c_sis96x
soundcore 9377 1 snd
snd_page_alloc 10441 2 snd_intel8x0,snd_pcm
dm_snapshot 16237 0
dm_zero 2241 0
dm_mirror 19985 0
dm_mod 50521 6 dm_snapshot,dm_zero,dm_mirror
ext3 116809 2
jbd 53077 1 ext3
[root@localhost ~]# lsusb
Bus 002 Device 002: ID 0d64:5338 DXG Technology Corp.
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 002: ID 0cf3:0001 Atheros Communications, Inc.
Bus 001 Device 001: ID 0000:0000
[root@localhost ~]# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
sit0 no wireless extensions.
[root@localhost ~]# dmesg
Linux version 2.6.15-1.2054_FC5 (
bhcompile@hs20-bc1-3.build.redhat.com) (gcc version 4.1.0 20060304 (Red Hat 4.1.0-3)) #1 Tue Mar 14 15:48:33 EST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d6000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
found SMP MP-table at 000fbd40
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 126960 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:0
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000faa20
ACPI: RSDT (v001 AMIINT AMIINI09 0x00000010 MSFT 0x0100000d) @ 0x1fff0000
ACPI: FADT (v001 AMIINT AMIINI09 0x00000011 MSFT 0x0100000d) @ 0x1fff0030
ACPI: MADT (v001 AMIINT AMIINI09 0x00000011 MSFT 0x0100000d) @ 0x1fff00c0
ACPI: DSDT (v001 SiS 645 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c03d4000 soft=c03d3000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1992.074 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 513820k/524224k available (1914k kernel code, 9868k reserved, 774k data, 176k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3990.19 BogoMIPS (lpj=7980387)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00000400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00000400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 00000400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
CPU: Intel(R) Celeron(R) CPU 2.00GHz stepping 07
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking if image is initramfs... it is
Freeing initrd memory: 1644k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Uncovering SIS961 that hid as a SIS503 (compatible=1)
Enabling SiS 96x SMBus.
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:00:0b.0
PCI: Cannot allocate resource region 2 of device 0000:00:0b.0
PCI: BIOS reporting unknown device 00:58
PCI: Device 0000:00:0b.1 not found by BIOS
PCI: Device 0000:00:0b.3 not found by BIOS
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: dde00000-dfefffff
PREFETCH window: cdb00000-ddcfffff
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1159378142.184:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key EE596B44DDA71123
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Thermal Zone [THRM] (10 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected SiS 650 chipset
agpgart: AGP aperture is 128M @ 0xe0000000
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 961 MuTIOL IDE UDMA100 controller
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: QUANTUM FIREBALLlct15 10, ATA DISK drive
hdb: Maxtor 90320D2, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: DVD-RW IDE1008, ATAPI CD/DVD-ROM drive
hdd: HL-DT-ST CD-RW GCE-8240B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 19746720 sectors (10110 MB) w/418KiB Cache, CHS=19590/16/63, UDMA(33)
hda: cache flushes not supported
hda: hda1 hda2
hdb: max request size: 128KiB
hdb: 6306048 sectors (3228 MB) w/256KiB Cache, CHS=6256/16/63, UDMA(33)
hdb: cache flushes not supported
hdb: hdb1
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache, DMA
ide-floppy driver 0.99.newide
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard as /class/input/input0
IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 7, 655360 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI wakeup devices:
PCI0 UAR1 UAR2 USB1 USB2 MDM AUD
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 176k freed
Write protecting the kernel read-only data: 359k
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
device-mapper: 4.5.0-ioctl (2005-10-04) initialised:
dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 6 roles, 1161 types, 135 bools, 1 sens, 256 cats
security: 55 classes, 38679 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
8139cp: pci dev 0000:00:10.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp: Try the "8139too" driver instead.
i2c-sis96x version 1.0.0
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x1000
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 16
eth0: RealTek RTL8139 at 0xe0822e00, 00:20:ed:ba:83:57, IRQ 16
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 21 (level, low) -> IRQ 17
intel8x0_measure_ac97_clock: measured 54911 usecs
intel8x0: clocking to 48000
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:02.2[D] -> GSI 20 (level, low) -> IRQ 18
ohci_hcd 0000:00:02.2: OHCI Host Controller
ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.2: irq 18, io mem 0xdffff000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:02.3[A] -> GSI 23 (level, low) -> IRQ 19
ohci_hcd 0000:00:02.3: OHCI Host Controller
ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.3: irq 19, io mem 0xdfffe000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-2: new full speed USB device using ohci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
usb 2-2: new full speed USB device using ohci_hcd and address 2
Non-volatile memory driver v1.2
usb 2-2: configuration #1 chosen from 1 choice
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
SCSI subsystem initialized
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
lp0: using parport0 (interrupt-driven).
lp0: console ready
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
Vendor: DIGITAL Model: CAMERA Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
usb-storage: device scan complete
0:0:0:0: Attached scsi generic sg0 type 0
SCSI device sda: 503040 512-byte hdwr sectors (258 MB)
sda: Write Protect is off
sda: Mode Sense: 00 06 00 00
sda: assuming drive cache: write through
SCSI device sda: 503040 512-byte hdwr sectors (258 MB)
sda: Write Protect is off
sda: Mode Sense: 00 06 00 00
sda: assuming drive cache: write through
sda: sda1
sd 0:0:0:0: Attached scsi removable disk sda
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 1048568k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:1048568k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (4095 buckets, 32760 max) - 232 bytes per conntrack
eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.7
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
ppdev: user-space parallel port driver
ppdev0: registered pardevice
ppdev0: unregistered pardevice
ppdev1: claim the port first
ppdev2: claim the port first
ppdev3: claim the port first
audit(1159371043.416:2): avc: granted { execstack } for pid=2416 comm="metacity" scontext=root:system_r:unconfined_t:s0-s0:c0.c255 tcontext=root:system_r:unconfined_t:s0-s0:c0.c255 tclass=process
audit(1159371043.416:3): avc: granted { execmem } for pid=2416 comm="metacity" scontext=root:system_r:unconfined_t:s0-s0:c0.c255 tcontext=root:system_r:unconfined_t:s0-s0:c0.c255 tclass=process
audit(1159371048.368:4): avc: denied { use } for pid=2446 comm="bluez-pin" name="[7704]" dev=pipefs ino=7704 scontext=root:system_r:bluetooth_helper_t:s0-s0:c0.c255 tcontext=system_u:system_r:xdm_t:s0-s0:c0.c255 tclass=fd
audit(1159371048.372:5): avc: denied { use } for pid=2446 comm="bluez-pin" name="[7704]" dev=pipefs ino=7704 scontext=root:system_r:bluetooth_helper_t:s0-s0:c0.c255 tcontext=system_u:system_r:xdm_t:s0-s0:c0.c255 tclass=fd
audit(1159371056.124:6): avc: granted { execstack } for pid=2430 comm="nautilus" scontext=root:system_r:unconfined_t:s0-s0:c0.c255 tcontext=root:system_r:unconfined_t:s0-s0:c0.c255 tclass=process
audit(1159371056.124:7): avc: granted { execmem } for pid=2430 comm="nautilus" scontext=root:system_r:unconfined_t:s0-s0:c0.c255 tcontext=root:system_r:unconfined_t:s0-s0:c0.c255 tclass=process
audit(1159371056.124:8): avc: granted { execmem } for pid=2430 comm="nautilus" scontext=root:system_r:unconfined_t:s0-s0:c0.c255 tcontext=root:system_r:unconfined_t:s0-s0:c0.c255 tclass=process
audit(1159371057.148:9): avc: granted { execmem } for pid=2430 comm="nautilus" scontext=root:system_r:unconfined_t:s0-s0:c0.c255 tcontext=root:system_r:unconfined_t:s0-s0:c0.c255 tclass=process
audit(1159371057.148:10): avc: granted { execmem } for pid=2430 comm="nautilus" scontext=root:system_r:unconfined_t:s0-s0:c0.c255 tcontext=root:system_r:unconfined_t:s0-s0:c0.c255 tclass=process
audit(1159371057.412:11): avc: granted { execmem } for pid=2430 comm="nautilus" scontext=root:system_r:unconfined_t:s0-s0:c0.c255 tcontext=root:system_r:unconfined_t:s0-s0:c0.c255 tclass=process
SELinux: initialized (dev sda1, type vfat), uses genfs_contexts
audit(1159371080.202:12): avc: granted { execmem } for pid=2430 comm="nautilus" scontext=root:system_r:unconfined_t:s0-s0:c0.c255 tcontext=root:system_r:unconfined_t:s0-s0:c0.c255 tclass=process
audit(1159371080.202:13): avc: granted { execmem } for pid=2430 comm="nautilus" scontext=root:system_r:unconfined_t:s0-s0:c0.c255 tcontext=root:system_r:unconfined_t:s0-s0:c0.c255 tclass=process
[root@localhost ~]#
[root@localhost ~]#