Je tente d'installer les pilotes ATI sur ma FC5 x86_64 depuis un moment. J'ai une Asus ATI x1300 pciexpress. J'ai installé par livna le kmod-fglrx et l'autre package (je sais plus le nom).
J'ai suivi le tuto qui se trouve sur ce site où on doit faire un init 3 puis un rmmod radeon drm puis un ati-fglrx-config-display enable. Quand j'essaie d'enlever le module radeon, j'ai un message d'erreur qui me dit qu'il ne trouve pas de module au nom de radeon dans /proc/module. Cette manipulation n'a aucun effet, si je fais un fglrxinfo j'ai :
fglrxinfo
X Error of failed request: GLXBadContext
Major opcode of failed request: 143 (GLX)
Minor opcode of failed request: 5 (X_GLXMakeCurrent)
Serial number of failed request: 15
Current serial number in output stream: 15
j'ai essayé de faire un aticonfig --initial -> écran noir
j'ai essayé de refaire le lien comme indiqué ici :
http://www.fedora-france.org/modules/newbb/viewtopic.php?topic_id=11564&forum=17&post_id=72118#forumpost72118
voici une copie de mon xorg.conf si ca peut aider qqun (j'ai laissé le driver vesa initial, sinon je n'ai pas d'affichage):
# XFree86 4 configuration created by pyxf86config
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, a font server independent of the X server is
# used to render fonts.
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "ch"
Option "XkbVariant" "fr"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "Buttons" "8"
Option "Resolution" "1200"
Option "Emulate3Buttons" "yes"
Option "ZAxisMapping" "4 5"
Option "ButtonMapping" "1 2 3 6 8 7 4 5"
EndSection
Section "Monitor"
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "LCD Panel 1280x1024"
DisplaySize 340 270
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 31.5 - 67.0
VertRefresh 50.0 - 75.0
Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "vesa"
VendorName "Videocard vendor"
BoardName "ATI Technologies Inc Unknown device 7166"
Option "VideoOverlay" "on"
#Option "accel" "yes"
#Option "no_dri" "no"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
s'agit-il d'un bug de la version 64 bits?