Fedora-Fr

Ce site est optimisé pour être consulté depuis un navigateur moderne dans lequel JavaScript est activé.

named

core04

Dite s'il vous plait; named ne veut pas demarrer
[root@localhost ~]# service named start
Démarrage de named : [ÉCHOUÉ]
[root@localhost ~]#

iptable et selinux sont désactivés
aucun eerreur n'est envoyé sauf [ÉCHOUÉ]

drpixel

Que te sors tail -f /var/log/messages pendant la tentative de démarrage de named ?

Anvil

Si on ne sait pas ce que tu as fait *avant* d'essayer de le demarrer (genre la conf), on ne peut pas deviner ce qui ne va pas. (Voir : http://www.gnurou.org/Writing/SmartQuestionsFr )
Le seuil conseil valide c'est celui de drpixel : "debrouille toi avec le /var/log/messages" (traduction libre).

grosminet

il a une commande qui controle la syntaxe de named
named-checkconf
( si pas d'erreur ok sinon il renvoie sur la ligne qui pose probleme )
lire avec kwrite pour le numero de ligne ou vi ( qui numerote en bas )
pas contre ne pas modifier avec kwrite

core04

La commande tail -f /var/log/messages
Donne

Jan 15 20:15:01 localhost pam_timestamp_check: pam_timestamp: `/' owner UID != 0
Jan 15 20:15:02 localhost crond(pam_unix)[6006]: session closed for user root
Jan 15 20:15:06 localhost pam_timestamp_check: pam_timestamp: `/' owner UID != 0
Jan 15 20:15:41 localhost last message repeated 7 times
Jan 15 20:16:46 localhost last message repeated 13 times
Jan 15 20:17:51 localhost last message repeated 13 times
Jan 15 20:18:56 localhost last message repeated 13 times
Jan 15 20:19:01 localhost pam_timestamp_check: pam_timestamp: `/' owner UID != 0
Jan 15 20:19:04 localhost sshd(pam_unix)[6161]: session opened for user root by root(uid=0)
Jan 15 20:19:06 localhost pam_timestamp_check: pam_timestamp: `/' owner UID != 0
Jan 15 20:19:41 localhost last message repeated 7 times
Jan 15 20:20:01 localhost last message repeated 4 times
Jan 15 20:20:01 localhost crond(pam_unix)[6202]: session opened for user root by (uid=0)
Jan 15 20:20:01 localhost crond(pam_unix)[6201]: session opened for user root by (uid=0)
Jan 15 20:20:02 localhost crond(pam_unix)[6202]: session closed for user root
Jan 15 20:20:04 localhost crond(pam_unix)[6201]: session closed for user root
Jan 15 20:20:06 localhost pam_timestamp_check: pam_timestamp: `/' owner UID != 0

La commande named-checkconf ne donne rien

Ma config /etc/named.conf

//
// named.conf for Red Hat caching-nameserver
//

options {
directory "/var/named";
dump-file "/var/named/data/cache_dump.db";
statistics-file "/var/named/data/named_stats.txt";
/*
* If there is a firewall between you and nameservers you want
* to talk to, you might need to uncomment the query-source
* directive below. Previous versions of BIND always asked
* questions using port 53, but BIND 8.1 uses an unprivileged
* port by default.
*/
// query-source address * port 53;
};

//
// a caching only nameserver config
//
controls {
inet 127.0.0.1 allow { localhost; } keys { rndckey; };
};

zone "." IN {
type hint;
file "named.ca";
};

zone "localdomain" IN {
type master;
file "localdomain.zone";
allow-update { none; };
};

zone "localhost" IN {
type master;
file "localhost.zone";
allow-update { none; };
};

zone "0.0.127.in-addr.arpa" IN {
type master;
file "named.local";
allow-update { none; };
};

zone "0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa" IN {
type master;
file "named.ip6.local";
allow-update { none; };
};

zone "255.in-addr.arpa" IN {
type master;
file "named.broadcast";
allow-update { none; };
};

zone "0.in-addr.arpa" IN {
type master;
file "named.zero";
allow-update { none; };
};

include "/etc/rndc.key";

Je vous remercie

Anvil

La commande tail -f /var/log/messages

Cette commande ne sert a rien si tu n'essayes pas de demarrer le daemon a ce moment-la. Voir le `man tail' pour savoir ce que ca fait. Ou alors tu aurais pu nous donner les lignes syslog au moment ou tu as essaye plus tot dans la journee de demarrer le serveur.

Fait interessant : pourquoi ton / appartient pas a root ? Si tu as fait ca, les dieux seuls savent combient d'autres permissions sont cassees.

A *priori* le named.conf est correctement ecrit. Mais je ne suis pas un analyseur lexico-syntaxique.
le named.conf n'est pas le seul fichiers de conf. Mais /var/log/messages est surement la piste qui te donnera le plus d'informations. A condition de lire la bonne partie du fichier :p

core04

Anvil a écrit:
Fait interessant : pourquoi ton / appartient pas a root ? Si tu as fait ca, les dieux seuls savent combient d'autres permissions sont cassees.

elle commence a me casser le couilles core tu sais?
baa c'est des conneries core 4 je pense.
Déjà quand je fait su pour se connecter en root
[core04@localhost ~]$ su
Password: (passe de root)
Error sending status request (Opération non permise)
Error sending status request (Opération non permise)
Error sending status request (Opération non permise)
Error sending status request (Opération non permise)
su: ne peut initialiser les groupes
Error sending status request (Opération non permise)
[core04@localhost ~]$

alors que si je fait ssh root@localhost
[core04@localhost ~]$ ssh root@localhost
root@localhost's password: (passe root)
Last login: Sun Jan 15 20:51:01 2006
[root@localhost ~]#

autre choses quand je clic par exemple sur une icon qui necessite le droit root,(ex Démarrage des applications => Paramètre de système => Paramètre de serveur => Services) au lieu que c'est une boite de dialogue qui s'ouvre pour rentrer un mot de passe et bien j'ai une fenêtre disant que j'ai pas le droit suffisant.
Or pour faire cette manup il faut que je me deconnecte completement et me reconnecter en root.
Brèf. elle me degoute core 04.

Voici le contenu du fichier /var/log/messages
Notez que sa fait pas longtemps que jai installé core 4

Jan 15 21:56:45 localhost last message repeated 13 times
Jan 15 21:57:50 localhost last message repeated 13 times
Jan 15 21:58:55 localhost last message repeated 13 times
Jan 15 21:59:25 localhost last message repeated 6 times
Jan 15 21:59:26 localhost gdm(pam_unix)[2854]: session closed for user levrai
Jan 15 21:59:27 localhost dbus: avc: 1 AV entries and 1/512 buckets used, longest chain length 1
Jan 15 21:59:27 localhost gconfd (core04-7779): Réception du signal 15, arrêt correct
Jan 15 21:59:27 localhost gconfd (core04-7779): Sortie
Jan 15 21:59:34 localhost gdm[2746]: Redémarrage du maître...
Jan 15 21:59:34 localhost kernel: mtrr: MTRR 3 not used
Jan 15 21:59:34 localhost shutdown: shutting down for system reboot
Jan 15 21:59:34 localhost init: Switching to runlevel: 6
Jan 15 21:59:37 localhost xfs[2521]: terminating
Jan 15 21:59:51 localhost xinetd[2367]: Exiting...
Jan 15 21:59:54 localhost named[7432]: shutting down: flushing changes
Jan 15 21:59:54 localhost named[7432]: stopping command channel on 127.0.0.1#953
Jan 15 21:59:54 localhost named[7432]: no longer listening on 127.0.0.1#53
Jan 15 21:59:54 localhost named[7432]: no longer listening on 192.168.0.150#53
Jan 15 21:59:54 localhost named[7432]: exiting
Jan 15 21:59:55 localhost kernel: Kernel logging (proc) stopped.
Jan 15 21:59:55 localhost kernel: Kernel log daemon terminating.
Jan 15 21:59:56 localhost exiting on signal 15
Jan 15 22:00:58 localhost syslogd 1.4.1: restart.
Jan 15 22:00:58 localhost kernel: klogd 1.4.1, log source = /proc/kmsg started.
Jan 15 22:00:58 localhost kernel: Linux version 2.6.11-1.1369_FC4 (bhcompile@decompose.build.redhat.com) (gcc version 4.0.0 20050525 (Red Hat 4.0.0-9)) #1 Thu Jun 2 22:55:56 EDT 2005
Jan 15 22:00:58 localhost kernel: BIOS-provided physical RAM map:
Jan 15 22:00:58 localhost kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Jan 15 22:00:58 localhost kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Jan 15 22:00:58 localhost kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Jan 15 22:00:58 localhost kernel: BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
Jan 15 22:00:58 localhost kernel: BIOS-e820: 000000000bff0000 - 000000000bff3000 (ACPI NVS)
Jan 15 22:00:58 localhost kernel: BIOS-e820: 000000000bff3000 - 000000000c000000 (ACPI data)
Jan 15 22:00:58 localhost kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Jan 15 22:00:58 localhost kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Jan 15 22:00:58 localhost kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Jan 15 22:00:58 localhost kernel: 0MB HIGHMEM available.
Jan 15 22:00:58 localhost kernel: 191MB LOWMEM available.
Jan 15 22:00:58 localhost kernel: Using x86 segment limits to approximate NX protection
Jan 15 22:00:58 localhost kernel: DMI 2.3 present.
Jan 15 22:00:58 localhost kernel: ACPI: PM-Timer IO Port: 0x4008
Jan 15 22:00:58 localhost kernel: Allocating PCI resources starting at 0c000000 (gap: 0c000000:f2c00000)
Jan 15 22:00:58 localhost kernel: Built 1 zonelists
Jan 15 22:00:58 localhost kernel: Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
Jan 15 22:00:58 localhost kernel: Initializing CPU#0
Jan 15 22:00:58 localhost kernel: CPU 0 irqstacks, hard=c0457000 soft=c0456000
Jan 15 22:00:58 localhost kernel: PID hash table entries: 1024 (order: 10, 16384 bytes)
Jan 15 22:00:58 localhost kernel: Detected 1908.968 MHz processor.
Jan 15 22:00:58 localhost kernel: Using pmtmr for high-res timesource
Jan 15 22:00:58 localhost kernel: Console: colour VGA+ 80x25
Jan 15 22:00:58 localhost kernel: Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 15 22:00:58 localhost kernel: Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Jan 15 22:00:58 localhost kernel: Memory: 188716k/196544k available (2518k kernel code, 7200k reserved, 690k data, 180k init, 0k highmem)
Jan 15 22:00:58 localhost kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Jan 15 22:00:58 localhost kernel: Security Framework v1.0.0 initialized
Jan 15 22:00:58 localhost kernel: SELinux: Initializing.
Jan 15 22:00:58 localhost kernel: SELinux: Starting in permissive mode
Jan 15 22:00:58 localhost kernel: selinux_register_security: Registering secondary module capability
Jan 15 22:00:58 localhost kernel: Capability LSM initialized as secondary
Jan 15 22:00:58 localhost kernel: Mount-cache hash table entries: 512
Jan 15 22:00:58 localhost kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Jan 15 22:00:58 localhost kernel: CPU: L2 Cache: 512K (64 bytes/line)
Jan 15 22:00:58 localhost kernel: Intel machine check architecture supported.
Jan 15 22:00:58 localhost kernel: Intel machine check reporting enabled on CPU#0.
Jan 15 22:00:58 localhost kernel: CPU: AMD Athlon(tm) XP 2600+ stepping 00
Jan 15 22:00:58 localhost kernel: Enabling fast FPU save and restore... done.
Jan 15 22:00:58 localhost kernel: Enabling unmasked SIMD FPU exception support... done.
Jan 15 22:00:58 localhost kernel: Checking 'hlt' instruction... OK.
Jan 15 22:00:58 localhost kernel: ACPI: setting ELCR to 0200 (from 0e20)
Jan 15 22:00:58 localhost kernel: checking if image is initramfs... it is
Jan 15 22:00:58 localhost kernel: Freeing initrd memory: 1667k freed
Jan 15 22:00:58 localhost kernel: softlockup thread 0 started up.
Jan 15 22:00:58 localhost kernel: NET: Registered protocol family 16
Jan 15 22:00:58 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb9a0, last bus=1
Jan 15 22:00:58 localhost kernel: PCI: Using configuration type 1
Jan 15 22:00:58 localhost kernel: mtrr: v2.0 (20020519)
Jan 15 22:00:58 localhost kernel: ACPI: Subsystem revision 20050309
Jan 15 22:00:58 localhost kernel: ACPI: Interpreter enabled
Jan 15 22:00:58 localhost kernel: ACPI: Using PIC for interrupt routing
Jan 15 22:00:58 localhost kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Jan 15 22:00:58 localhost kernel: PCI: Probing PCI hardware (bus 00)
Jan 15 22:00:58 localhost kernel: PCI: Via IRQ fixup
Jan 15 22:00:58 localhost kernel: PCI: Via IRQ fixup
Jan 15 22:00:58 localhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
Jan 15 22:00:58 localhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
Jan 15 22:00:58 localhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
Jan 15 22:00:58 localhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5
Jan 15 22:00:58 localhost kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Jan 15 22:00:58 localhost kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Jan 15 22:00:58 localhost kernel: ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Jan 15 22:00:58 localhost rpc.statd[2032]: Version 1.0.7 Starting
Jan 15 22:00:58 localhost kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Jan 15 22:00:58 localhost kernel: ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
Jan 15 22:00:58 localhost kernel: ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
Jan 15 22:00:58 localhost kernel: ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
Jan 15 22:00:58 localhost kernel: ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
Jan 15 22:00:58 localhost rpc.statd[2032]: open (/var/lib/nfs/statd/state): Permission denied
Jan 15 22:00:58 localhost kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Jan 15 22:00:58 localhost kernel: pnp: PnP ACPI init
Jan 15 22:00:58 localhost kernel: pnp: PnP ACPI: found 13 devices
Jan 15 22:00:58 localhost kernel: usbcore: registered new driver usbfs
Jan 15 22:00:58 localhost kernel: usbcore: registered new driver hub
Jan 15 22:00:58 localhost kernel: PCI: Using ACPI for IRQ routing
Jan 15 22:00:58 localhost kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Jan 15 22:00:58 localhost kernel: pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
Jan 15 22:00:58 localhost kernel: pnp: 00:01: ioport range 0x5000-0x500f has been reserved
Jan 15 22:00:58 localhost kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Jan 15 22:00:58 localhost kernel: apm: overridden by ACPI.
Jan 15 22:00:58 localhost kernel: audit: initializing netlink socket (disabled)
Jan 15 22:00:58 localhost kernel: audit(1137362428.669:1): initialized
Jan 15 22:00:58 localhost kernel: Total HugeTLB memory allocated, 0
Jan 15 22:00:58 localhost kernel: VFS: Disk quotas dquot_6.5.1
Jan 15 22:00:58 localhost kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jan 15 22:00:58 localhost kernel: SELinux: Registering netfilter hooks
Jan 15 22:00:58 localhost kernel: Initializing Cryptographic API
Jan 15 22:00:58 localhost kernel: ksign: Installing public key data
Jan 15 22:00:58 localhost kernel: Loading keyring
Jan 15 22:00:59 localhost kernel: - Added public key 42BD35A990375F72
Jan 15 22:00:59 localhost kernel: - User ID: Red Hat, Inc. (Kernel Module GPG key)
Jan 15 22:00:59 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jan 15 22:00:59 localhost kernel: ACPI: Fan [FAN] (on)
Jan 15 22:00:59 localhost kernel: ACPI: Thermal Zone [THRM] (76 C)
Jan 15 22:00:59 localhost kernel: isapnp: Scanning for PnP cards...
Jan 15 22:00:59 localhost kernel: isapnp: No Plug & Play device found
Jan 15 22:00:59 localhost auditd: Unable to open /var/log/audit/audit.log (Permission denied)
Jan 15 22:00:59 localhost kernel: Real Time Clock Driver v1.12
Jan 15 22:00:59 localhost auditd: The audit daemon is exiting.
Jan 15 22:00:59 localhost kernel: Linux agpgart interface v0.101 (c) Dave Jones
Jan 15 22:00:59 localhost kernel: agpgart: Detected VIA KM400/KM400A chipset
Jan 15 22:00:59 localhost kernel: agpgart: AGP aperture is 128M @ 0xd0000000
Jan 15 22:00:59 localhost kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Jan 15 22:00:59 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jan 15 22:00:59 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 15 22:00:59 localhost kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled
Jan 15 22:00:59 localhost kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jan 15 22:00:59 localhost kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jan 15 22:00:59 localhost kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jan 15 22:00:59 localhost kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jan 15 22:00:59 localhost kernel: io scheduler noop registered
Jan 15 22:00:59 localhost kernel: io scheduler anticipatory registered
Jan 15 22:00:59 localhost kernel: io scheduler deadline registered
Jan 15 22:00:59 localhost kernel: io scheduler cfq registered
Jan 15 22:00:59 localhost kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Jan 15 22:00:59 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jan 15 22:00:59 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan 15 22:00:59 localhost kernel: VP_IDE: IDE controller at PCI slot 0000:00:11.1
Jan 15 22:00:59 localhost kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Jan 15 22:00:59 localhost kernel: PCI: setting IRQ 11 as level-triggered
Jan 15 22:00:59 localhost kernel: ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Jan 15 22:00:59 localhost kernel: VP_IDE: chipset revision 6
Jan 15 22:00:59 localhost kernel: VP_IDE: not 100% native mode: will probe irqs later
Jan 15 22:00:59 localhost kernel: VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
Jan 15 22:00:59 localhost kernel: ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:pio
Jan 15 22:00:59 localhost kernel: ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:DMA, hdd:DMA
Jan 15 22:00:59 localhost kernel: hda: WDC WD800BB-22DKA0, ATA DISK drive
Jan 15 22:00:59 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jan 15 22:00:59 localhost kernel: hdc: JLMS XJ-HD166S, ATAPI CD/DVD-ROM drive
Jan 15 22:00:59 localhost kernel: hdd: HL-DT-ST GCE-8483B, ATAPI CD/DVD-ROM drive
Jan 15 22:00:59 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
Jan 15 22:00:59 localhost kernel: hda: max request size: 1024KiB
Jan 15 22:00:59 localhost kernel: hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
Jan 15 22:00:59 localhost kernel: hda: cache flushes supported
Jan 15 22:00:59 localhost kernel: hda: hda1 hda2 hda3
Jan 15 22:00:59 localhost kernel: hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Jan 15 22:00:59 localhost kernel: Uniform CD-ROM driver Revision: 3.20
Jan 15 22:00:59 localhost kernel: hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Jan 15 22:00:59 localhost kernel: ide-floppy driver 0.99.newide
Jan 15 22:00:59 localhost kernel: usbcore: registered new driver hiddev
Jan 15 22:00:59 localhost kernel: usbcore: registered new driver usbhid
Jan 15 22:00:59 localhost kernel: drivers/usb/input/hid-core.c: v2.01:USB HID core driver
Jan 15 22:00:59 localhost kernel: mice: PS/2 mouse device common for all mice
Jan 15 22:00:59 localhost kernel: md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
Jan 15 22:00:59 localhost kernel: NET: Registered protocol family 2
Jan 15 22:00:59 localhost kernel: IP: routing cache hash table of 256 buckets, 8Kbytes
Jan 15 22:00:59 localhost kernel: TCP established hash table entries: 8192 (order: 4, 65536 bytes)
Jan 15 22:00:59 localhost kernel: TCP bind hash table entries: 8192 (order: 5, 229376 bytes)
Jan 15 22:00:59 localhost kernel: TCP: Hash tables configured (established 8192 bind 8192)
Jan 15 22:00:59 localhost kernel: Initializing IPsec netlink socket
Jan 15 22:00:59 localhost kernel: NET: Registered protocol family 1
Jan 15 22:00:59 localhost kernel: NET: Registered protocol family 17
Jan 15 22:00:59 localhost kernel: ACPI wakeup devices:
Jan 15 22:00:59 localhost kernel: SLPB PCI0 USB0 USB1 USB2 USB6 USB7 USB8 USB9 LAN0 MC97 UAR1 ECP1
Jan 15 22:00:59 localhost kernel: ACPI: (supports S0 S3 S4 S5)
Jan 15 22:00:59 localhost kernel: Freeing unused kernel memory: 180k freed
Jan 15 22:00:59 localhost kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Jan 15 22:00:59 localhost kernel: device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
Jan 15 22:00:59 localhost kernel: input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
Jan 15 22:00:59 localhost kernel: kjournald starting. Commit interval 5 seconds
Jan 15 22:00:59 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 15 22:00:59 localhost kernel: security: 3 users, 6 roles, 764 types, 87 bools
Jan 15 22:00:59 localhost kernel: security: 55 classes, 180131 rules
Jan 15 22:00:59 localhost kernel: SELinux: Completing initialization.
Jan 15 22:00:59 localhost kernel: SELinux: Setting up existing superblocks.
Jan 15 22:00:59 localhost kernel: SELinux: initialized (dev dm-0, type ext3), uses xattr
Jan 15 22:00:59 localhost kernel: SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Jan 15 22:00:59 localhost kernel: SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
Jan 15 22:00:59 localhost kernel: SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
Jan 15 22:00:59 localhost kernel: SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling
Jan 15 22:00:59 localhost kernel: SELinux: initialized (dev devpts, type devpts), uses transition SIDs
Jan 15 22:00:59 localhost kernel: SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
Jan 15 22:00:59 localhost kernel: SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Jan 15 22:00:59 localhost kernel: SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
Jan 15 22:00:59 localhost kernel: SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
Jan 15 22:00:59 localhost kernel: SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
Jan 15 22:00:59 localhost kernel: SELinux: initialized (dev proc, type proc), uses genfs_contexts
Jan 15 22:00:59 localhost kernel: SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
Jan 15 22:00:59 localhost kernel: SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
Jan 15 22:00:59 localhost kernel: SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
Jan 15 22:00:59 localhost kernel: SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
Jan 15 22:00:59 localhost kernel: Floppy drive(s): fd0 is 1.44M
Jan 15 22:00:59 localhost kernel: FDC 0 is a post-1991 82077
Jan 15 22:00:59 localhost kernel: usbcore: registered new driver usbnet
Jan 15 22:00:59 localhost kernel: via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
Jan 15 22:00:59 localhost kernel: ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Jan 15 22:00:59 localhost kernel: eth0: VIA Rhine II at 0xde001000, 00:0c:76:c6:38:a3, IRQ 11.
Jan 15 22:00:59 localhost kernel: eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
Jan 15 22:00:59 localhost kernel: via82xx: Assuming DXS channels with 48k fixed sample rate.
Jan 15 22:00:59 localhost kernel: Please try dxs_support=1 or dxs_support=4 option
Jan 15 22:00:59 localhost kernel: and report if it works on your machine.
Jan 15 22:00:59 localhost kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
Jan 15 22:00:59 localhost kernel: PCI: setting IRQ 10 as level-triggered
Jan 15 22:00:59 localhost kernel: ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Jan 15 22:00:59 localhost kernel: shpchp: acpi_shpchprm:_SB_.PCI0 evaluate _BBN fail=0x5
Jan 15 22:00:59 localhost kernel: shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
Jan 15 22:00:59 localhost kernel: ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Jan 15 22:00:59 localhost kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
Jan 15 22:00:59 localhost kernel: ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Jan 15 22:00:59 localhost kernel: ehci_hcd 0000:00:10.3: EHCI Host Controller
Jan 15 22:00:59 localhost kernel: ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
Jan 15 22:00:59 localhost kernel: ehci_hcd 0000:00:10.3: irq 11, io mem 0xde000000
Jan 15 22:00:59 localhost kernel: ehci_hcd 0000:00:10.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
Jan 15 22:00:59 localhost kernel: hub 1-0:1.0: USB hub found
Jan 15 22:00:59 localhost kernel: hub 1-0:1.0: 6 ports detected
Jan 15 22:00:59 localhost kernel: USB Universal Host Controller Interface driver v2.2
Jan 15 22:00:59 localhost kernel: SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
Jan 15 22:00:59 localhost kernel: ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Jan 15 22:00:59 localhost kernel: uhci_hcd 0000:00:10.0: UHCI Host Controller
Jan 15 22:00:59 localhost kernel: uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
Jan 15 22:00:59 localhost kernel: uhci_hcd 0000:00:10.0: irq 11, io base 0x0000d000
Jan 15 22:00:59 localhost kernel: hub 2-0:1.0: USB hub found
Jan 15 22:00:59 localhost kernel: hub 2-0:1.0: 2 ports detected
Jan 15 22:00:59 localhost kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
Jan 15 22:00:59 localhost kernel: ACPI: PCI Interrupt 0000:00:10.1 -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
Jan 15 22:00:59 localhost kernel: uhci_hcd 0000:00:10.1: UHCI Host Controller
Jan 15 22:00:59 localhost kernel: uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
Jan 15 22:00:59 localhost kernel: uhci_hcd 0000:00:10.1: irq 11, io base 0x0000d400
Jan 15 22:00:59 localhost kernel: hub 3-0:1.0: USB hub found
Jan 15 22:00:59 localhost kernel: hub 3-0:1.0: 2 ports detected
Jan 15 22:00:59 localhost kernel: ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Jan 15 22:00:59 localhost kernel: uhci_hcd 0000:00:10.2: UHCI Host Controller
Jan 15 22:00:59 localhost kernel: uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
Jan 15 22:00:59 localhost kernel: uhci_hcd 0000:00:10.2: irq 10, io base 0x0000d800
Jan 15 22:00:59 localhost kernel: hub 4-0:1.0: USB hub found
Jan 15 22:00:59 localhost kernel: hub 4-0:1.0: 2 ports detected
Jan 15 22:00:59 localhost kernel: usb 2-2: new full speed USB device using uhci_hcd and address 2
Jan 15 22:00:59 localhost kernel: eth1: register usbnet at usb-0000:00:10.0-2, CDC Ethernet Device, 00:07:cb:00:00:ff
Jan 15 22:00:59 localhost kernel: SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
Jan 15 22:00:59 localhost kernel: NET: Registered protocol family 10
Jan 15 22:00:59 localhost kernel: Disabled Privacy Extensions on device c03e6820(lo)
Jan 15 22:00:59 localhost kernel: IPv6 over IPv4 tunneling driver
Jan 15 22:00:59 localhost kernel: ACPI: Power Button (FF) [PWRF]
Jan 15 22:00:59 localhost kernel: ACPI: Sleep Button (CM) [SLPB]
Jan 15 22:00:59 localhost kernel: ibm_acpi: ec object not found
Jan 15 22:00:59 localhost kernel: md: Autodetecting RAID arrays.
Jan 15 22:00:59 localhost kernel: md: autorun ...
Jan 15 22:00:59 localhost kernel: md: ... autorun DONE.
Jan 15 22:00:59 localhost kernel: audit(1137358852.917:2): avc: denied { write } for pid=1500 comm="fsck" name=rhgb-console dev=ramfs ino=5388 scontext=system_u:system_r:fsadm_t tcontext=system_u:object_r:ramfs_t tclass=fifo_file
Jan 15 22:00:59 localhost kernel: EXT3 FS on dm-0, internal journal
Jan 15 22:00:59 localhost kernel: kjournald starting. Commit interval 5 seconds
Jan 15 22:00:59 localhost kernel: EXT3 FS on hda1, internal journal
Jan 15 22:00:59 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 15 22:00:59 localhost kernel: SELinux: initialized (dev hda1, type ext3), uses xattr
Jan 15 22:00:59 localhost kernel: SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Jan 15 22:00:59 localhost kernel: kjournald starting. Commit interval 5 seconds
Jan 15 22:00:59 localhost kernel: EXT3 FS on hda2, internal journal
Jan 15 22:00:59 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 15 22:00:59 localhost kernel: SELinux: initialized (dev hda2, type ext3), uses xattr
Jan 15 22:00:59 localhost kernel: Adding 393208k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1
Jan 15 22:00:59 localhost kernel: SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
Jan 15 22:00:59 localhost kernel: ip_tables: (C) 2000-2002 Netfilter core team
Jan 15 22:00:59 localhost kernel: ip_conntrack version 2.1 (1535 buckets, 12280 max) - 272 bytes per conntrack
Jan 15 22:00:59 localhost kernel: audit(1137358859.089:3): avc: denied { dac_override } for pid=2046 comm="auditd" capability=1 scontext=system_u:system_r:auditd_t tcontext=system_u:system_r:auditd_t tclass=capability
Jan 15 22:00:59 localhost kernel: audit(1137358859.089:4): avc: denied { dac_read_search } for pid=2046 comm="auditd" capability=2 scontext=system_u:system_r:auditd_t tcontext=system_u:system_r:auditd_t tclass=capability
Jan 15 22:00:59 localhost kernel: audit(1137358859.558:5): audit_backlog_limit=256 old=64 by auid=4294967295
Jan 15 22:00:59 localhost kernel: SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Jan 15 22:01:00 localhost hcid[2087]: Bluetooth HCI daemon
Jan 15 22:01:00 localhost kernel: Bluetooth: Core ver 2.7
Jan 15 22:01:00 localhost kernel: NET: Registered protocol family 31
Jan 15 22:01:00 localhost kernel: Bluetooth: HCI device and connection manager initialized
Jan 15 22:01:00 localhost kernel: Bluetooth: HCI socket layer initialized
Jan 15 22:01:00 localhost kernel: Bluetooth: L2CAP ver 2.7
Jan 15 22:01:00 localhost kernel: Bluetooth: L2CAP socket layer initialized
Jan 15 22:01:00 localhost sdpd[2091]: Bluetooth SDP daemon
Jan 15 22:01:00 localhost hcid[2087]: Unable to get on D-BUS
Jan 15 22:01:00 localhost kernel: Bluetooth: RFCOMM ver 1.5
Jan 15 22:01:00 localhost kernel: Bluetooth: RFCOMM socket layer initialized
Jan 15 22:01:00 localhost kernel: Bluetooth: RFCOMM TTY layer initialized
Jan 15 22:01:01 localhost kernel: SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
Jan 15 22:01:01 localhost kernel: SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
Jan 15 22:01:03 localhost xinetd[2352]: xinetd Version 2.3.13 started with libwrap loadavg options compiled in.
Jan 15 22:01:03 localhost xinetd[2352]: Started working: 0 available services
Jan 15 22:01:12 localhost fstab-sync[2533]: removed all generated mount points
Jan 15 22:01:12 localhost fstab-sync[2550]: added mount point /media/floppy for /dev/fd0
Jan 15 22:01:12 localhost fstab-sync[2553]: added mount point /media/cdrecorder for /dev/hdd
Jan 15 22:01:13 localhost fstab-sync[2557]: added mount point /media/cdrom for /dev/hdc
Jan 15 22:01:28 localhost gdm(pam_unix)[2802]: session opened for user root by (uid=0)
Jan 15 22:01:42 localhost pam_timestamp_check: pam_timestamp: `/' owner UID != 0
Jan 15 22:01:44 localhost gconfd (root-2983): démarrage (version 2.10.0), pid 2983 utilisateur « root »
Jan 15 22:01:44 localhost gconfd (root-2983): Adresse « xml:readonly:/etc/gconf/gconf.xml.mandatory » résolue vers une source de configuration en lecture seule à la position 0
Jan 15 22:01:44 localhost gconfd (root-2983): Adresse « xml:readwrite:/root/.gconf » résolue vers une source de configuration accessible en écriture à la position 1
Jan 15 22:01:44 localhost gconfd (root-2983): Adresse « xml:readonly:/etc/gconf/gconf.xml.defaults » résolue vers une source de configuration en lecture seule à la position 2
Jan 15 22:01:47 localhost pam_timestamp_check: pam_timestamp: `/' owner UID != 0
Jan 15 22:02:12 localhost last message repeated 5 times
Jan 15 22:02:13 localhost automount[3059]: >> /usr/sbin/showmount: can't get address for .directory
Jan 15 22:02:13 localhost automount[3059]: lookup(program): lookup for .directory failed
Jan 15 22:02:13 localhost automount[3059]: failed to mount /net/.directory
Jan 15 22:02:13 localhost automount[3064]: failed to mount /misc/.directory
Jan 15 22:02:17 localhost pam_timestamp_check: pam_timestamp: `/' owner UID != 0

Je vous remerci

Anvil

elle commence a me casser le couilles core tu sais?
baa c'est des conneries core 4 je pense.

C'est ca, bien sur. plutot un cas de PEBKAC ouais. Bonne chance.

drpixel

Bon tu nous a balancé tout azimut le /var/log/messages ... Je te propose de faire ceci :
1 - tail -f /var/log/messages dans un terminal
2 - /etc/rc.d/init.d/named start dans un autre
3 - PENDANT l'étape 2 tu regardes le résultat de 1. et essayes de nous poster SEULEMENT le résultat de 1 ... histoire de ne pas aller a la pêche aux infos.

core04

C'est bon et je vous remercie:
En fait j'ai desinstaller BIND et le reinstaller et donc tout va bien.
Merci encore