xav
Salut !
J'ai un souci avec mon affichage. Je voudrais faire fonctionner mon deuxième moniteur pour avoir un bureau plus confortable grâce à TwinView.
Après modification du xorg.conf (ci dessous), je redémarre et l'affichage semble essayer plusieurs modes avec les deux moniteurs affichant du noir mais ca finit par planter.
Les messages d'erreur sont le plus souvent :
Mode Clock ... exceeds DDC max 0MHZ
et
Hsync out of range
J'ai pourtant les données constructeur du deuxième moniteur (Sony Multiscan 420 GS).
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "Xinerama" "on"
Option "Clone" "off"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
#Load "dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Device"
Identifier "NV AGP TwinView"
Driver "nvidia"
VendorName "nvidia"
BoardName "NVIDIA Quadro 4 (generic)"
BusID "PCI:1:0:0"
Option "TwinView"
Option "SecondMonitorHorizSync" "30-110"
Option "SecondMonitorVertRefresh" "48-170"
Option "MetaModes" "1280x1024,1600x1200"
Option "TwinViewOrientation" "RightOf"
Option "ConnectedMonitor" "CRT, CRT"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Dell M782p"
DisplaySize 310 230
HorizSync 30.0 - 85.0
VertRefresh 50.0 - 160.0
Option "dpms"
EndSection
Section "Screen"
Identifier "Screen0"
Device "NV AGP TwinView"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
Si quelqu'un a un avis éclairé sur la question...Merci d'avance !!
Xav
