Bonjour,

Je suis sous fedora 40, 6.11.3-200.fc40.x86_64

waylande KDE, les mises à jour sont faites. Je n’ai pas installé de nouveaux logiciel.

Depuis environs 3 jours, je constate un fort ralentissement, cela se voit surtout dans la navigation internet avec firefox, les pages se chargent lentement aux changement d’onglets. Le PC tout d’un coup se bloque, la souris n’est plus active, le PC se met à biper et le clavier s’éteint / se rallume plusieurs fois puis ce phénomène s’arrête.

Ça m’était jamais arrivé, une idée ?

Merci de vos avis et suggestions

Bonne journée

  • Perso en dehors du loop qui change souvent, je ne vois pas grand chose.

    Peut tu donner ce que retourne la commande “sensors” ?

    Voir un rapport de l’état de santé de tes unités de stockage “smartd” :

    sudo dnf install smartmontools -y

    Et remplace X par la lettre de ton unité de stockage (A si tu n’en a qu’un, etc…).

    sudo smartctl -aA /dev/sdX

Tu as vérifié les températures du pc?

Plus d’infos sur le matériel?

As-tu vérifié l’espace disponible sur ton périphérique de stockage.
Ça arrive après une mise à jour que l’espace se réduise, notamment /tmp ou /var ton /home aussi.

quelque chose dans dmesg ou journactl ?

Bonjour,

Je ne sais pas utiliser journalctl, mais en cherchant j’ai trouvé la commande ci-dessous

Par la commande journalctl -b

J’ai parcouru les 4000 premières lignes, et il y a des lignes en rouge = erreurs il me semble


oct 16 18:26:52 localhost.localdomain systemd-journald[235]: Journal started
oct 16 18:26:52 localhost.localdomain systemd-journald[235]: [🡕] Runtime Journal (/run/log/journal/961>
oct 16 18:26:52 localhost.localdomain systemd-modules-load[236]: **Failed to find module 'ashmem_linux'**
oct 16 18:26:52 localhost.localdomain systemd-modules-load[236]: **Failed to find module 'binder_linux'**
oct 16 18:26:52 localhost.localdomain systemd-modules-load[236]: Inserted module 'i2c_dev'
oct 16 18:26:52 localhost.localdomain systemd[1]: Started systemd-journald.service - Journal Service.
oct 16 18:26:52 localhost.localdomain systemd-modules-load[236]: Module 'msr' is built in

oct 16 16:27:03 localhost.localdomain systemd-journald[508]: Journal started
oct 16 16:27:03 localhost.localdomain systemd-journald[508]: [🡕] Runtime Journal (/run/log/journal/961>
oct 16 16:27:03 localhost.localdomain audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=42949672>
oct 16 16:27:03 localhost.localdomain systemd[1]: Queued start job for default target graphical.target.
oct 16 16:27:03 localhost.localdomain systemd[1]: systemd-journald.service: Deactivated successfully.
oct 16 16:27:03 localhost.localdomain systemd-modules-load[511]: **Failed to find module 'ashmem_linux'**
oct 16 16:27:03 localhost.localdomain audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=42949672>
oct 16 16:27:03 localhost.localdomain systemd[1]: Started systemd-journald.service - Journal Service.
oct 16 16:27:03 localhost.localdomain kernel: **audit: type=1130 audit(1729088823.227:5): pid=1 uid=0 au**>
oct 16 16:27:03 localhost.localdomain systemd-modules-load[511]: **Failed to find module 'binder_linux'**
oct 16 16:27:03 localhost.localdomain systemd-modules-load[511]: Module 'msr' is built in

oct 16 16:27:03 localhost.localdomain systemd[1]: Mounted var-lib-snapd-snap-whatsapp\\x2dfor\\x2dlinux-59.mount - Mount unit for whatsapp-for-linux, revision 59.
oct 16 16:27:03 localhost.localdomain systemd-udevd[584]: Using default interface naming scheme 'v255'.
oct 16 16:27:03 localhost.localdomain systemd-udevd[584]: **Configuration file /etc/udev/rules.d/64-smfp_samsung.rules is marked executable. Please remove executable permissi**>
oct 16 16:27:03 localhost.localdomain systemd-udevd[584]: **/usr/lib/udev/rules.d/99-anbox.rules:1 Ignoring NAME="%k", as it will take no effect.**
oct 16 16:27:03 localhost.localdomain systemd-udevd[584]: **/usr/lib/udev/rules.d/99-anbox.rules:2 Ignoring NAME="%k", as it will take no effect.**
oct 16 16:27:03 localhost.localdomain systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files.
oct 16 16:27:03 localhost.localdomain audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udevd comm="syst>
oct 16 16:27:03 localhost.localdomain systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...

oct 16 16:27:11 localhost.localdomain systemd[1]: Started waydroid-container.service - Waydroid Container.
oct 16 16:27:11 localhost.localdomain audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=waydroid-container comm=>
oct 16 16:27:11 localhost.localdomain abrtd[920]: **'/var/spool/abrt/oops-2023-05-20-09:17:05-1094-0' is not a problem directory**
oct 16 16:27:11 localhost.localdomain audit[987]: NETFILTER_CFG table=firewalld:3 family=1 entries=228 op=nft_register_chain pid=987 subj=system_u:system_r:firewalld_t:s0 c>
oct 16 16:27:11 localhost.localdomain audit[987]: NETFILTER_CFG table=firewalld_policy_drop:4 family=1 entries=2 op=nft_unregister_table pid=987 subj=system_u:system_r:fire>
oct 16 16:27:12 localhost.localdomain rsyslogd[857]: **imjournal: journal files changed, reloading...  [v8.2312.0-1.fc40 try https://www.rsyslog.com/e/0 ]**
oct 16 16:27:12 localhost.localdomain abrtd[920]: **'/var/spool/abrt/oops-2023-07-28-12:18:49-1134-0' is not a problem directory**
oct 16 16:27:12 localhost.localdomain systemd[1]: Finished dkms.service - Builds and install new kernel modules through DKMS.
oct 16 16:27:08 localhost.localdomain systemd[1]: Started ModemManager.service - Modem Manager.
oct 16 16:27:08 localhost.localdomain audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=ModemManager comm="syste>
oct 16 16:27:09 localhost.localdomain abrtd[920]: **'/var/spool/abrt/oops-2020-12-16-09:35:54-770-2' is not a problem directory**
oct 16 16:27:10 localhost.localdomain systemd[1]: Started firewalld.service - firewalld - dynamic firewall daemon.

oct 16 16:27:11 localhost.localdomain audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=waydroid-container comm=>
oct 16 16:27:11 localhost.localdomain abrtd[920]: **'/var/spool/abrt/oops-2023-05-20-09:17:05-1094-0' is not a problem directory**
oct 16 16:27:11 localhost.localdomain audit[987]: NETFILTER_CFG table=firewalld:3 family=1 entries=228 op=nft_register_chain pid=987 subj=system_u:system_r:firewalld_t:s0 c>
oct 16 16:27:11 localhost.localdomain audit[987]: NETFILTER_CFG table=firewalld_policy_drop:4 family=1 entries=2 op=nft_unregister_table pid=987 subj=system_u:system_r:fire>
oct 16 16:27:12 localhost.localdomain rsyslogd[857]: **imjournal: journal files changed, reloading...  [v8.2312.0-1.fc40 try https://www.rsyslog.com/e/0 ]**
oct 16 16:27:12 localhost.localdomain abrtd[920]: **'/var/spool/abrt/oops-2023-07-28-12:18:49-1134-0' is not a problem directory**
oct 16 16:27:12 localhost.localdomain systemd[1]: Finished dkms.service - Builds and install new kernel modules through DKMS.

oct 16 16:27:12 localhost.localdomain systemd[1]: Started NetworkManager-dispatcher.service - Network Manager Script Dispatcher Service.
oct 16 16:27:12 localhost.localdomain audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=NetworkManager-dispatche>
oct 16 16:27:12 localhost.localdomain abrtd[920]: **'/var/spool/abrt/oops-2023-05-11-12:29:05-1123-0' is not a problem directory**
oct 16 16:27:12 localhost.localdomain kernel: r8169 0000:07:00.0 enp7s0: Link is Down
oct 16 16:27:12 localhost.localdomain systemd[1]: Started NetworkManager.service - Network Manager.
oct 16 16:27:12 localhost.localdomain systemd[1]: Reached target nfs-client.target - NFS client services.
oct 16 16:27:12 localhost.localdomain cupsd[1086]: **Printer drivers are deprecated and will stop working in a future version of CUPS. See https://github.com/OpenPrinting/cup**>
oct 16 16:27:12 localhost.localdomain systemd[1]: Reached target remote-fs-pre.target - Preparation for Remote File Systems.
oct 16 16:27:12 localhost.localdomain cupsd[1086]: **Missing value on line 3820 of /var/cache/cups/job.cache.**
oct 16 16:27:12 localhost.localdomain cupsd[1086]: **Missing value on line 3872 of /var/cache/cups/job.cache.**
oct 16 16:27:12 localhost.localdomain systemd[1]: Starting colord.service - Manage, Install and Generate Color Profiles...
oct 16 16:27:12 localhost.localdomain systemd[1]: tmp-snap.rootfs_c55Een.mount: Deactivated successfully.
oct 16 16:27:12 localhost.localdomain systemd[1]: Started colord.service - Manage, Install and Generate Color Profiles.
oct 16 16:27:12 localhost.localdomain audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=colord comm="systemd" ex>
oct 16 16:27:13 localhost.localdomain abrtd[920]: **'/var/spool/abrt/oops-2023-03-24-14:10:20-904-0' is not a problem directory**
oct 16 16:27:13 localhost.localdomain ModemManager[985]: **<msg> [base-manager] couldn't check support for device '/sys/devices/pci0000:00/0000:00:1c.6/0000:07:00.0': not sup**>
oct 16 16:27:13 localhost.localdomain anbox.container-manager[1090]: + DATA_PATH=/var/snap/anbox/common/
oct 16 16:27:13 localhost.localdomain anbox.container-manager[1090]: + ANDROID_IMG=/snap/anbox/186/android.img
oct 16 16:27:13 localhost.localdomain anbox.container-manager[1090]: + mkdir -p /var/snap/anbox/common/lxc
oct 16 16:27:13 localhost.localdomain anbox.container-manager[1090]: + /snap/anbox/186/bin/anbox-bridge.sh start
oct 16 16:27:13 localhost.localdomain abrtd[920]: **'/var/spool/abrt/oops-2023-04-11-21:29:18-1030-0' is not a problem directory**
oct 16 16:27:13 localhost.localdomain systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
oct 16 16:27:13 localhost.localdomain systemd[1]: Reached target snapd.mounts.target - Mounted snaps.

oct 16 16:27:14 localhost.localdomain anbox.container-manager[1246]: + grep -q 'binder /var/snap/anbox/common/binderfs'
oct 16 16:27:14 localhost.localdomain anbox.container-manager[1090]: + mount -t binder none /var/snap/anbox/common/binderfs
oct 16 16:27:14 localhost.localdomain audit[1247]: SECCOMP auid=4294967295 uid=0 gid=0 ses=4294967295 subj=system_u:system_r:unconfined_service_t:s0 pid=1247 comm="mount" e>
oct 16 16:27:14 localhost.localdomain anbox.container-manager[1090]: + exec /snap/anbox/186/bin/anbox-wrapper.sh container-manager --data-path=/var/snap/anbox/common/ --and>
oct 16 16:27:14 localhost.localdomain abrtd[920]: **'/var/spool/abrt/oops-2023-09-26-17:35:23-1383-2' is not a problem directory**
oct 16 16:27:14 localhost.localdomain abrtd[920]: **'/var/spool/abrt/oops-2023-03-31-10:00:32-1008-0' is not a problem directory**
oct 16 16:27:14 localhost.localdomain audit[1090]: SECCOMP auid=4294967295 uid=0 gid=0 ses=4294967295 subj=system_u:system_r:unconfined_service_t:s0 pid=1090 comm="anbox" e>
oct 16 16:27:14 localhost.localdomain kernel: loop25: detected capacity change from 0 to 636528
oct 16 16:27:14 localhost.localdomain audit[1090]: SECCOMP auid=4294967295 uid=0 gid=0 ses=4294967295 subj=system_u:system_r:unconfined_service_t:s0 pid=1090 comm="anbox" e>
oct 16 16:27:14 localhost.localdomain audit[1090]: SECCOMP auid=4294967295 uid=0 gid=0 ses=4294967295 subj=system_u:system_r:unconfined_service_t:s0 pid=1090 comm="anbox" e>
oct 16 16:27:15 localhost.localdomain abrtd[920]: **'/var/spool/abrt/oops-2023-07-26-17:09:41-1129-0' is not a problem directory**
oct 16 16:27:15 localhost.localdomain abrtd[920]: **'/var/spool/abrt/oops-2023-07-26-17:10:01-1129-0' is not a problem directory**
oct 16 16:27:16 localhost.localdomain abrtd[920]: **'/var/spool/abrt/oops-2023-03-31-10:00:42-1008-0' is not a problem directory**
oct 16 16:27:16 localhost.localdomain abrtd[920]: **'/var/spool/abrt/oops-2023-07-04-22:35:25-1142-0' is not a problem directory**
oct 16 16:27:17 localhost.localdomain abrtd[920]: **'/var/spool/abrt/oops-2023-08-06-11:46:33-1144-0' is not a problem directory**
oct 16 16:27:17 localhost.localdomain abrtd[920]: **'/var/spool/abrt/oops-2023-06-05-14:27:51-1132-0' is not a problem directory**
oct 16 16:27:18 localhost.localdomain abrtd[920]: **'/var/spool/abrt/oops-2023-09-26-17:35:27-1383-0' is not a problem directory**
oct 16 16:27:18 localhost.localdomain NetworkManager[1060]: <info>  [1729088838.6769] manager: startup complete
oct 16 16:27:18 localhost.localdomain systemd[1]: Finished NetworkManager-wait-online.service - Network Manager Wait Online.

oct 16 16:31:56 localhost.localdomain systemd-resolved[800]: enp7s0: Bus client set DNS server list to: 192.168.3.254
oct 16 16:31:56 localhost.localdomain NetworkManager[1060]: <info>  [1729089116.6653] device (enp7s0): state change: ip-config -> ip-check (reason 'none', sys-iface-state: >
oct 16 16:31:56 localhost.localdomain kernel: **ata3: SRST failed (errno=-16)**
oct 16 16:31:56 localhost.localdomain systemd[1]: Starting NetworkManager-dispatcher.service - Network Manager Script Dispatcher Service...
oct 16 16:31:56 localhost.localdomain systemd[1]: Started NetworkManager-dispatcher.service - Network Manager Script Dispatcher Service.

merci

oups plus en rouge une fois publiées, mais c’est les blocs recopiés où il y a des FAILDED

    rapy73 Que retourne
    $ sudo dmesg | fpaste

    Et tu peux mettre les 20/30 dernières lignes dans un bloc de code aussi.

      
# UNTITLED

From WebUI, 35 Seconds ago, written in Plain Text.

This paste will join the choir invisible in 23 Hours. ![](https://paste.centos.org/view/qr/87378a50) URL <https://paste.centos.org/view/87378a50> Embed [Show code](https://paste.centos.org/view/87378a50#) [Download Paste](https://paste.centos.org/view/download/87378a50) or [View Raw](https://paste.centos.org/view/raw/87378a50)

 1. [    0.000000] Linux version 6.11.3-200.fc40.x86_64 (mockbuild@4786ea1e4860458caf0f0f3344c01d01) (gcc (GCC) 14.2.1 20240912 (Red Hat 14.2.1-3), GNU ld version 2.41-37.fc40) #1 SMP PREEMPT_DYNAMIC Thu Oct 10 22:31:19 UTC 2024

 2. [    0.000000] Command line: BOOT_IMAGE=(hd0,msdos1)/boot/vmlinuz-6.11.3-200.fc40.x86_64 root=UUID=0816d1b5-ef58-4e6b-acad-2013e4c7f09d ro resume=UUID=f32b0517-8eb1-4c36-95b5-2f4517c8d824 rhgb quiet

 3. [    0.000000] BIOS-provided physical RAM map:

 4. [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable

 5. [    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved

 6. [    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved

 7. [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dddabfff] usable

 8. [    0.000000] BIOS-e820: [mem 0x00000000dddac000-0x00000000de0fefff] reserved

 9. [    0.000000] BIOS-e820: [mem 0x00000000de0ff000-0x00000000de217fff] ACPI NVS

10. [    0.000000] BIOS-e820: [mem 0x00000000de218000-0x00000000dedd3fff] reserved

11. [    0.000000] BIOS-e820: [mem 0x00000000dedd4000-0x00000000dedd4fff] usable

12. [    0.000000] BIOS-e820: [mem 0x00000000dedd5000-0x00000000dee17fff] ACPI NVS

13. [    0.000000] BIOS-e820: [mem 0x00000000dee18000-0x00000000df229fff] usable

14. [    0.000000] BIOS-e820: [mem 0x00000000df22a000-0x00000000df7f3fff] reserved

15. [    0.000000] BIOS-e820: [mem 0x00000000df7f4000-0x00000000df7fffff] usable

16. [    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved

17. [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved

18. [    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved

19. [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved

20. [    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved

21. [    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved

22. [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000031effffff] usable

23. [    0.000000] NX (Execute Disable) protection: active

24. [    0.000000] APIC: Static calls initialized

25. [    0.000000] SMBIOS 2.7 present.

26. [    0.000000] DMI: MSI MS-7673/P67A-G45 (MS-7673), BIOS V5.3 08/01/2012

27. [    0.000000] DMI: Memory slots populated: 3/4

28. [    0.000000] tsc: Fast TSC calibration using PIT

29. [    0.000000] tsc: Detected 3099.873 MHz processor

30. [    0.001146] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

        rapy73 L’idée est de mettre le lien retourné ainsi que les dernières lignes et non les premières. Tu peux modifier ton message.

        Tu n’aurais pas un hub USB qui déconne ?

          Bonjour,

          Oups pardon voici les 30 dernières, merci

          Pour le Hub usb, je n’ai que les ports usb du PC, pas de Hub externe connecté, quelle commande pourvérifier si mes ports sont en bon état de fonctionnement stp ?

          
[   23.693651] audit: type=1334 audit(1729145313.263:10): prog-id=34 op=LOAD

[   23.693888] audit: type=1334 audit(1729145313.263:11): prog-id=35 op=LOAD

[   23.704103] systemd-journald[504]: /var/log/journal/961d5502ccdd47f0b67adb49d6b7ba0a/system.journal: Journal file uses a different sequence number ID, rotating.

[   23.704111] systemd-journald[504]: Rotating system journal.

[   23.837318] systemd-journald[504]: /var/log/journal/961d5502ccdd47f0b67adb49d6b7ba0a/system.journal: Realtime clock jumped backwards relative to last journal entry, rotating.

[   23.837326] systemd-journald[504]: Rotating system journal.

[   23.958077] loop0: detected capacity change from 0 to 765496

[   23.965312] loop1: detected capacity change from 0 to 8

[   23.972047] loop2: detected capacity change from 0 to 213384

[   23.973669] squashfs: version 4.0 (2009/01/31) Phillip Lougher

[   23.976244] loop3: detected capacity change from 0 to 113992

[   23.981288] loop4: detected capacity change from 0 to 113384

[   23.988175] loop5: detected capacity change from 0 to 130960

[   23.992767] loop6: detected capacity change from 0 to 131016

[   23.999234] loop7: detected capacity change from 0 to 152112

[   24.001137] loop8: detected capacity change from 0 to 152056

[   24.004533] loop9: detected capacity change from 0 to 337424

[   24.012063] loop10: detected capacity change from 0 to 337560

[   24.015693] loop11: detected capacity change from 0 to 709280

[   24.018761] loop12: detected capacity change from 0 to 716176

[   24.021762] loop13: detected capacity change from 0 to 1017816

[   24.024880] loop14: detected capacity change from 0 to 1034424

[   24.031987] loop15: detected capacity change from 0 to 166424

[   24.034102] loop16: detected capacity change from 0 to 187776

[   24.038838] loop17: detected capacity change from 0 to 135552

[   24.042870] loop18: detected capacity change from 0 to 132464

[   24.048519] loop19: detected capacity change from 0 to 1178776

[   24.055310] loop20: detected capacity change from 0 to 1178784

[   24.056074] loop21: detected capacity change from 0 to 79328

[   24.060669] loop22: detected capacity change from 0 to 79520

[   24.064437] loop23: detected capacity change from 0 to 186000

[   24.069849] loop24: detected capacity change from 0 to 186024

[   24.295435] zram0: detected capacity change from 0 to 16777216

[   24.426718] Adding 8388604k swap on /dev/zram0.  Priority:100 extents:1 across:8388604k SSDsc

[   24.794162] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\\PMIO) (20240322/utaddress-204)

[   24.794175] ACPI: OSL: Resource conflict; ACPI support missing from driver?

[   24.794179] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\\GPIO) (20240322/utaddress-204)

[   24.794184] ACPI: OSL: Resource conflict; ACPI support missing from driver?

[   24.794186] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\\GPIO) (20240322/utaddress-204)

[   24.794191] ACPI: OSL: Resource conflict; ACPI support missing from driver?

[   24.794193] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\\GPIO) (20240322/utaddress-204)

[   24.794197] ACPI: OSL: Resource conflict; ACPI support missing from driver?

[   24.794199] lpc_ich: Resource conflict(s) found affecting gpio_ich

[   24.882361] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control

[   24.966006] r8169 0000:07:00.0 eth0: RTL8168e/8111e, 6c:62:6d:e9:99:63, XID 2c2, IRQ 37

[   24.966015] r8169 0000:07:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]

[   25.001970] input: PC Speaker as /devices/platform/pcspkr/input/input7

[   25.057657] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt

[   25.058422] i2c i2c-12: Successfully instantiated SPD at 0x50

[   25.058754] i2c i2c-12: Successfully instantiated SPD at 0x51

[   25.065747] i2c i2c-12: Successfully instantiated SPD at 0x53

[   25.090304] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer

[   25.090310] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules

[   25.090313] RAPL PMU: hw unit of domain package 2^-16 Joules

[   25.360877] snd_hda_intel 0000:01:00.1: Disabling MSI

[   25.360887] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client

[   25.417103] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8

[   25.417195] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9

[   25.417276] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10

[   25.417354] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11

[   25.422686] snd_hda_codec_realtek hdaudioC0D1: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line

[   25.422696] snd_hda_codec_realtek hdaudioC0D1:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

[   25.422700] snd_hda_codec_realtek hdaudioC0D1:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)

[   25.422703] snd_hda_codec_realtek hdaudioC0D1:    mono: mono_out=0x0

[   25.422706] snd_hda_codec_realtek hdaudioC0D1:    dig-out=0x11/0x1e

[   25.422708] snd_hda_codec_realtek hdaudioC0D1:    inputs:

[   25.422711] snd_hda_codec_realtek hdaudioC0D1:      Rear Mic=0x18

[   25.422714] snd_hda_codec_realtek hdaudioC0D1:      Front Mic=0x19

[   25.422716] snd_hda_codec_realtek hdaudioC0D1:      Line=0x1a

[   25.442888] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12

[   25.449408] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13

[   25.449495] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14

[   25.449590] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15

[   25.449673] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16

[   25.449767] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17

[   25.449842] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18

[   25.449941] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19

[   25.618088] iTCO_vendor_support: vendor-support=0

[   25.658347] iTCO_wdt iTCO_wdt.1.auto: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)

[   25.662745] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)

[   25.718773] r8169 0000:07:00.0 enp7s0: renamed from eth0

[   25.813030] at24 12-0050: supply vcc not found, using dummy regulator

[   25.822275] at24 12-0050: 256 byte spd EEPROM, read-only

[   25.822338] at24 12-0051: supply vcc not found, using dummy regulator

[   25.830152] at24 12-0051: 256 byte spd EEPROM, read-only

[   25.830220] at24 12-0053: supply vcc not found, using dummy regulator

[   25.831941] at24 12-0053: 256 byte spd EEPROM, read-only

[   25.866883] intel_rapl_common: Found RAPL domain package

[   25.866889] intel_rapl_common: Found RAPL domain core

[   25.866899] intel_rapl_common: package-0:package:long_term locked by BIOS

[   25.866902] intel_rapl_common: package-0:package:short_term locked by BIOS

[   26.809525] RPC: Registered named UNIX socket transport module.

[   26.809531] RPC: Registered udp transport module.

[   26.809533] RPC: Registered tcp transport module.

[   26.809535] RPC: Registered tcp-with-tls transport module.

[   26.809536] RPC: Registered tcp NFSv4.1 backchannel transport module.

[   30.255819] NET: Registered PF_QIPCRTR protocol family

[   33.312282] RTL8211DN Gigabit Ethernet r8169-0-700:00: attached PHY driver (mii_bus:phy_addr=r8169-0-700:00, irq=MAC)

[   33.530936] r8169 0000:07:00.0 enp7s0: Link is Down

[   34.598006] loop25: detected capacity change from 0 to 8

[   35.067618] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.

[   35.988876] loop25: detected capacity change from 0 to 636528

[   36.312008] r8169 0000:07:00.0 enp7s0: Link is Up - 1Gbps/Full - flow control rx/tx

[  966.331190] systemd-journald[504]: /var/log/journal/961d5502ccdd47f0b67adb49d6b7ba0a/user-1000.journal: Journal file uses a different sequence number ID, rotating.

            Perso en dehors du loop qui change souvent, je ne vois pas grand chose.

            Peut tu donner ce que retourne la commande “sensors” ?

            Voir un rapport de l’état de santé de tes unités de stockage “smartd” :

            sudo dnf install smartmontools -y

            Et remplace X par la lettre de ton unité de stockage (A si tu n’en a qu’un, etc…).

            sudo smartctl -aA /dev/sdX

            
root@localhost:\~# sensors 
coretemp-isa-0000 
Adapter: ISA adapter 
Package id 0:  +38.0°C  (high = +82.0°C, crit = +102.0°C) 
Core 0:        +38.0°C  (high = +82.0°C, crit = +102.0°C) 
Core 1:        +33.0°C  (high = +82.0°C, crit = +102.0°C) 

acpitz-acpi-0 
Adapter: ACPI interface 
temp1:        +27.8°C   
temp2:        +29.8°C   

nouveau-pci-0100 
Adapter: PCI adapter 
GPU core:    875.00 mV (min =  +0.82 V, max =  +1.09 V) 
fan1:        1290 RPM 
temp1:        +39.0°C  (high = +95.0°C, hyst =  +3.0°C) 
                      (crit = +105.0°C, hyst =  +5.0°C) 
                      (emerg = +135.0°C, hyst =  +5.0°C) 

root@localhost:\~#

            Le disque ssd où tourne ma fedora 40

            
root@localhost:\~# smartctl -aA /dev/sdb1 
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.11.3-200.fc40.x86_64] (local build) 
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org 

=== START OF INFORMATION SECTION === 
Model Family:     Samsung based SSDs 
Device Model:     Samsung SSD 860 EVO 250GB 
Serial Number:    S3YJNB0K293676R 
LU WWN Device Id: 5 002538 e40184bf9 
Firmware Version: RVT01B6Q 
User Capacity:    250.059.350.016 bytes [250 GB] 
Sector Size:      512 bytes logical/physical 
Rotation Rate:    Solid State Device 
Form Factor:      2.5 inches 
TRIM Command:     Available, deterministic, zeroed 
Device is:        In smartctl database 7.3/5528 
ATA Version is:   ACS-4 T13/BSR INCITS 529 revision 5 
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) 
Local Time is:    Thu Oct 17 11:21:22 2024 CEST 
SMART support is: Available - device has SMART capability. 
SMART support is: Enabled 

=== START OF READ SMART DATA SECTION === 
SMART overall-health self-assessment test result: PASSED 

General SMART Values: 
Offline data collection status:  (0x00) Offline data collection activity 
                                       was never started. 
                                       Auto Offline Data Collection: Disabled. 
Self-test execution status:      (   0) The previous self-test routine completed 
                                       without error or no self-test has ever  
                                       been run. 
Total time to complete Offline  
data collection:                (    0) seconds. 
Offline data collection 
capabilities:                    (0x53) SMART execute Offline immediate. 
                                       Auto Offline data collection on/off support. 
                                       Suspend Offline collection upon new 
                                       command. 
                                       No Offline surface scan supported. 
                                       Self-test supported. 
                                       No Conveyance Self-test supported. 
                                       Selective Self-test supported. 
SMART capabilities:            (0x0003) Saves SMART data before entering 
                                       power-saving mode. 
                                       Supports SMART auto save timer. 
Error logging capability:        (0x01) Error logging supported. 
                                       General Purpose Logging supported. 
Short self-test routine  
recommended polling time:        (   2) minutes. 
Extended self-test routine 
recommended polling time:        (  85) minutes. 
SCT capabilities:              (0x003d) SCT Status supported. 
                                       SCT Error Recovery Control supported. 
                                       SCT Feature Control supported. 
                                       SCT Data Table supported. 

SMART Attributes Data Structure revision number: 1 
Vendor Specific SMART Attributes with Thresholds: 
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE 
 5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0 
 9 Power_On_Hours          0x0032   097   097   000    Old_age   Always       -       11579 
12 Power_Cycle_Count       0x0032   093   093   000    Old_age   Always       -       6636 
177 Wear_Leveling_Count     0x0013   096   096   000    Pre-fail  Always       -       72 
179 Used_Rsvd_Blk_Cnt_Tot   0x0013   100   100   010    Pre-fail  Always       -       0 
181 Program_Fail_Cnt_Total  0x0032   100   100   010    Old_age   Always       -       0 
182 Erase_Fail_Count_Total  0x0032   100   100   010    Old_age   Always       -       0 
183 Runtime_Bad_Block       0x0013   100   100   010    Pre-fail  Always       -       0 
187 Uncorrectable_Error_Cnt 0x0032   100   100   000    Old_age   Always       -       0 
190 Airflow_Temperature_Cel 0x0032   073   052   000    Old_age   Always       -       27 
195 ECC_Error_Rate          0x001a   200   200   000    Old_age   Always       -       0 
199 CRC_Error_Count         0x003e   099   099   000    Old_age   Always       -       1 
235 POR_Recovery_Count      0x0012   099   099   000    Old_age   Always       -       358 
241 Total_LBAs_Written      0x0032   099   099   000    Old_age   Always       -       36085427955 

SMART Error Log Version: 1 
No Errors Logged 

SMART Self-test log structure revision number 1 
No self-tests have been logged.  [To run self-tests, use: smartctl -t] 

SMART Selective self-test log data structure revision number 1 
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS 
   1        0        0  Not_testing 
   2        0        0  Not_testing 
   3        0        0  Not_testing 
   4        0        0  Not_testing 
   5        0        0  Not_testing 
Selective self-test flags (0x0): 
 After scanning selected spans, do NOT read-scan remainder of disk. 
If Selective self-test is pending on power-up, resume after 0 minute delay. 

The above only provides legacy SMART information - try 'smartctl -x' for more 

root@localhost:\~#

            rapy73

            Pas de soucis à l’horizon de ce coté.

            Faudrait voir si tu sent une forte chaleur quand tu as les dysfonctionnements.

            Et aussi tester la mémoire vive (RAM) style avec memtester (voir plus bas sur la page du lien) :

            https://fr.linux-console.net/?p=16645

            Pour l’installer sur Fedora :

            sudo dnf install memtester

            Histoire de voir si c’est pas elle qui rend l’âme.

              Merci pour ton aide, j’ai entrepris d’ouvrir le PC se matin et de faire un peu de dépoussiérage, j’en ai sorti un peu du radiateur du proc et nettoyé les palles du ventilo qui semblait chargées. Je pense que la ventilation sera plus seine.

              Je note tous tes précieux renseignements pour une éventuelle prochaine fois.

              Encore merci