La c’est juste le disque 😜
Édit : Cela fait des années que c’est comme cela (même style de problèmes depuis 2007/2008 au moins, sans parler du bogue du disque qui se mettait en sécurité à une époque).
1 Raw_Read_Error_Rate 0x000f 115 099 006 Pre-fail Always - 86049526 7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 121298445
Il n’y a pas de perte de données (encore heureux), mais cela entraine tout un tas de micro problèmes qui en deviennent de gros (gel d’écran, problèmes d’accès aux données, sensation que le système doit être réinstallé ou changé, etc…).
Et mes petites oreilles me rapportent que ce n’est pas qu’avec les modèles premier prix de la marque qu’il y a des soucis…
Quand tu compare avec du WD black :
$ sudo smartctl -aA /dev/sdd
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.7.7-200.fc39.x86_64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Black
Device Model: WDC WD2003FZEX-00Z4SA0
Serial Number: WD-WMC5Cxxxxxxx
LU WWN Device Id: 5 xxxxxx xxxxx
Firmware Version: 01.01A01
User Capacity: 2 000 398 934 016 bytes [2,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database 7.3/5528
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Mar 6 06:11:42 2024 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (21120) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 231) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 166 158 021 Pre-fail Always - 6658
4 Start_Stop_Count 0x0032 094 094 000 Old_age Always - 6729
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 057 057 000 Old_age Always - 32082
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 095 095 000 Old_age Always - 5506
192 Power-Off_Retract_Count 0x0032 199 199 000 Old_age Always - 1202
193 Load_Cycle_Count 0x0032 199 199 000 Old_age Always - 5526
194 Temperature_Celsius 0x0022 123 090 000 Old_age Always - 27
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
Voir avec le bas de gamme en blue 5400tr/min :
# smartctl -aA /dev/sdc
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.7.7-200.fc39.x86_64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue
Device Model: WDC WD20EZRZ-00Z5HB0
Serial Number: WD-xxxxxxxxxxxxx
LU WWN Device Id: 5 0014ee xxxxxxxx
Firmware Version: 80.00A80
User Capacity: 2 000 398 934 016 bytes [2,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database 7.3/5528
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Mar 6 06:14:33 2024 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (25980) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 263) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 173 172 021 Pre-fail Always - 4333
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1771
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 040 040 000 Old_age Always - 44138
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 154
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 87
193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 3805506
194 Temperature_Celsius 0x0022 117 098 000 Old_age Always - 30
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
Il y a pas photo… Et je ne parle pas des Hitachi qui doivent sans doute dater de la même époque que le 7200.12 de Seagate… Qui tournent toujours sans problèmes depuis. Après ce n’est pas pour faire l’éloge d’autres marques, mais quand cela devient une trop “grande habitude” de voir les mêmes soucis, sur plusieurs versions à la suite et surtout plus de 20 ans après… Et le pire en neuf qui sort de l’emballage…
J’ai même mon vieux 500Go WD Black SATA2 qui tournent toujours aujourd’hui (et tout les jours), qui date pourtant d’avant le 7200.12 Seagate…