# blkid | grep "0654b64a"
/dev/sda3: UUID="0654b64a-8279-4703-91c7-3c822460bc33" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="499d8cf6-03"
Résultat de la commande :
# smartctl -aA /dev/sd3
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.5.12-100.fc37.x86_64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Micron_M500DC_2.5"_7mm_480GB
Serial Number: 15381175DADF
LU WWN Device Id: 5 00a075 11175dadf
Firmware Version: 0144
User Capacity: 480 103 981 056 bytes [480 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available, deterministic, zeroed
Device is: Not in smartctl database 7.3/5528
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Dec 27 18:54:32 2023 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run.
Total time to complete Offline
data collection: ( 2235) seconds.
Offline data collection capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003)
Saves SMART data before entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 6) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x0035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0
5 Reallocated_Sector_Ct 0x0032 100 100 001 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 001 Old_age Always - 43913
12 Power_Cycle_Count 0x0032 100 100 001 Old_age Always - 100
170 Unknown_Attribute 0x0033 100 100 010 Pre-fail Always - 12
171 Unknown_Attribute 0x0032 100 100 001 Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 001 Old_age Always - 0
173 Unknown_Attribute 0x0033 095 095 000 Pre-fail Always - 289
174 Unknown_Attribute 0x0032 100 100 001 Old_age Always - 78
184 End-to-End_Error 0x0033 100 100 050 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 001 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 001 Old_age Always - 1
194 Temperature_Celsius 0x0022 080 050 000 Old_age Always - 20 (Min/Max 8/50)
195 Hardware_ECC_Recovered 0x003a 100 100 001 Old_age Always - 75793692
197 Current_Pending_Sector 0x0032 100 100 001 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 001 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 100 100 001 Old_age Always - 0
202 Unknown_SSD_Attribute 0x0018 095 095 001 Old_age Offline - 5
206 Unknown_SSD_Attribute 0x000e 100 100 001 Old_age Always - 0
247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 7353747743
248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 177216880
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Vendor (0xff) Completed without error 00% 19493 -
# 2 Vendor (0xff) Completed without error 00% 13117 -
# 3 Short offline Completed without error 00% 3 -
# 4 Extended offline Completed without error 00% 2 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
The above only provides legacy SMART information - try 'smartctl -x' for more
edit xylphute : correction de balises