$ sudo dmesg
[ 0.038988] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19109699403
91419 ns
[ 0.045647] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.045957] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u524288
[ 0.045964] pcpu-alloc: s225280 r8192 d28672 u524288 alloc=1*2097152
[ 0.045967] pcpu-alloc: [0] 0 1 2 3
[ 0.045990] Kernel command line: BOOT_IMAGE=(hd0,gpt2)/vmlinuz-6.5.6-300.fc39.x86_64 root=UUID=156a8373-9aa
7-4511-bb15-25be583cef3a ro rootflags=subvol=root rhgb quiet
[ 0.046076] Unknown kernel command line parameters "rhgb BOOT_IMAGE=(hd0,gpt2)/vmlinuz-6.5.6-300.fc39.x86_6
4", will be passed to user space.
[ 0.046105] random: crng init done
[ 0.047697] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.048494] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.048564] Fallback order for Node 0: 0
[ 0.048568] Built 1 zonelists, mobility grouping on. Total pages: 4104801
[ 0.048570] Policy zone: Normal
[ 0.048771] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.048780] software IO TLB: area num 4.
[ 0.099730] Memory: 16218064K/16680468K available (18432K kernel code, 3276K rwdata, 14436K rodata, 4508K i
nit, 17396K bss, 462144K reserved, 0K cma-reserved)
[ 0.099976] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.099989] Kernel/User page tables isolation: enabled
[ 0.100022] ftrace: allocating 53440 entries in 209 pages
[ 0.109686] ftrace: allocated 209 pages with 4 groups
[ 0.110581] Dynamic Preempt: voluntary
[ 0.110611] rcu: Preemptible hierarchical RCU implementation.
[ 0.110612] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.110613] Trampoline variant of Tasks RCU enabled.
[ 0.110614] Rude variant of Tasks RCU enabled.
[ 0.110614] Tracing variant of Tasks RCU enabled.
[ 0.110615] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.110616] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.113953] NR_IRQS: 524544, nr_irqs: 728, preallocated irqs: 16
[ 0.114150] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.114265] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval__
__)
[ 0.116152] Console: colour VGA+ 80x25
[ 0.116155] printk: console [tty0] enabled
[ 0.116212] ACPI: Core revision 20230331
[ 0.116299] hpet: HPET dysfunctional in PC10. Force disabled.
[ 0.116300] APIC: Switch to symmetric I/O mode setup
[ 0.116302] DMAR: Host address width 39
[ 0.116303] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.116309] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.116312] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.116317] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 0.116319] DMAR: RMRR base: 0x000000d7f18000 end: 0x000000d7f26fff
[ 0.116320] DMAR: RMRR base: 0x000000dd000000 end: 0x000000df1fffff
[ 0.116322] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.116323] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.116324] DMAR: ANDD device: 6 name: \_SB.PCI0.UA01
[ 0.116324] DMAR: ANDD device: 7 name: \_SB.PCI0.SDHC
[ 0.116326] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
[ 0.116328] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.116329] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.116868] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.116871] x2apic enabled
[ 0.116877] Switched APIC routing to cluster x2apic.
[ 0.117361] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f345dd713, max_idle_ns: 440795
247230 ns
[ 0.117369] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.10 BogoMIPS (lp
j=2494051)
[ 0.117395] CPU0: Thermal monitoring enabled (TM1)
[ 0.117423] process: using mwait in idle threads
[ 0.117427] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.117428] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.117431] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.117434] Spectre V2 : Mitigation: Retpolines
[ 0.117434] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.117435] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.117436] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.117438] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.117439] Spectre V2 : User space: Mitigation: STIBP via prctl
[ 0.117440] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.117443] MDS: Mitigation: Clear CPU buffers
[ 0.117444] MMIO Stale Data: Unknown: No mitigations
[ 0.117445] SRBDS: Mitigation: Microcode
[ 0.117450] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.117451] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.117453] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.117454] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.117456] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.118365] Freeing SMP alternatives memory: 48K
[ 0.118365] pid_max: default: 32768 minimum: 301
[ 0.118365] LSM: initializing lsm=lockdown,capability,yama,selinux,bpf,landlock,integrity
[ 0.118365] Yama: becoming mindful.
[ 0.118365] SELinux: Initializing.
[ 0.118365] LSM support for eBPF active
[ 0.118365] landlock: Up and running.
[ 0.118365] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.118365] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.118365] smpboot: CPU0: Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz (family: 0x6, model: 0x45, stepping: 0x
1)
[ 0.118365] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.118365] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.118365] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.118365] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU dri
ver.
[ 0.118365] ... version: 3
[ 0.118365] ... bit width: 48
[ 0.118365] ... generic registers: 4
[ 0.118365] ... value mask: 0000ffffffffffff
[ 0.118365] ... max period: 00007fffffffffff
[ 0.118365] ... fixed-purpose events: 3
[ 0.118365] ... event mask: 000000070000000f
[ 0.118365] signal: max sigframe size: 1776
[ 0.118365] Estimated ratio of average max frequency by base frequency (times 1024): 1064
[ 0.118365] rcu: Hierarchical SRCU implementation.
[ 0.118365] rcu: Max phase no-delay instances is 400.
[ 0.118365] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.118406] smp: Bringing up secondary CPUs ...
[ 0.118501] smpboot: x86: Booting SMP configuration:
[ 0.118503] .... node #0, CPUs: #1 #2 #3
[ 0.120923] **MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/**
admin-guide/hw-vuln/mds.html for more details.
[ 0.121413] smp: Brought up 1 node, 4 CPUs
[ 0.121413] smpboot: Max logical packages: 1
[ 0.121413] smpboot: Total of 4 processors activated (19952.40 BogoMIPS)
[ 0.122816] devtmpfs: initialized
[ 0.122816] x86/mm: Memory block size: 128MB
[ 0.124243] ACPI: PM: Registering ACPI NVS region [mem 0xcfb61000-0xcfb67fff] (28672 bytes)
[ 0.124243] ACPI: PM: Registering ACPI NVS region [mem 0xda71c000-0xda7fffff] (933888 bytes)
[ 0.124243] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.124243] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.124410] pinctrl core: initialized pinctrl subsystem
[ 0.124527] PM: RTC time: 16:49:16, date: 2023-12-14
[ 0.124919] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.125053] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.125057] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.125060] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.125074] audit: initializing netlink subsys (disabled)
[ 0.125087] audit: type=2000 audit(1702572556.007:1): state=initialized audit_enabled=0 res=1
[ 0.125087] thermal_sys: Registered thermal governor 'fair_share'
[ 0.125087] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.125087] thermal_sys: Registered thermal governor 'step_wise'
[ 0.125087] thermal_sys: Registered thermal governor 'user_space'
[ 0.125087] cpuidle: using governor menu
[ 0.125087] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.125087] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.125087] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.125087] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved as E820 entry
[ 0.125375] PCI: Using configuration type 1 for base access
[ 0.125432] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.125526] ENERGY_PERF_BIAS: **Set to 'normal', was 'performance'**
[ 0.125533] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.126405] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.126405] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.126405] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.126405] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.126636] cryptd: max_cpu_qlen set to 1000
[ 0.126636] raid6: skipped pq benchmark and selected avx2x4
[ 0.126636] raid6: using avx2x2 recovery algorithm
[ 0.126636] ACPI: Added _OSI(Module Device)
[ 0.126636] ACPI: Added _OSI(Processor Device)
[ 0.126636] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.126636] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.138389] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.139824] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.164713] ACPI: Dynamic OEM Table Load:
[ 0.164721] ACPI: SSDT 0xFFFF8A98C0D73400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.165319] ACPI: Dynamic OEM Table Load:
[ 0.165319] ACPI: SSDT 0xFFFF8A98C13C7800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.165319] ACPI: Dynamic OEM Table Load:
[ 0.165319] ACPI: SSDT 0xFFFF8A98C128E200 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.165978] ACPI: EC: EC started
[ 0.165979] ACPI: EC: interrupt blocked
[ 0.166917] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.166920] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[ 0.166922] ACPI: Interpreter enabled
[ 0.166952] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.166953] ACPI: Using IOAPIC for interrupt routing
[ 0.167466] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.167467] PCI: Using E820 reservations for host bridge windows
[ 0.167641] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 0.181131] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.181138] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.181261] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[ 0.181397] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR DPC]
[ 0.181399] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.181833] PCI host bridge to bus 0000:00
[ 0.181836] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.181838] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.181840] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.181842] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000e7fff window]
[ 0.181843] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[ 0.181845] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.181860] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.181930] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.181938] pci 0000:00:02.0: reg 0x10: [mem 0xf6c00000-0xf6ffffff 64bit]
[ 0.181944] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.181948] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.181961] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.182039] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.182047] pci 0000:00:03.0: reg 0x10: [mem 0xf7c34000-0xf7c37fff 64bit]
[ 0.182145] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.182159] pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit]
[ 0.182208] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.182306] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.182322] pci 0000:00:16.0: reg 0x10: [mem 0xf7c3f000-0xf7c3f01f 64bit]
[ 0.182382] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.182431] pci 0000:00:16.3: [8086:9c3d] type 00 class 0x070002
[ 0.182444] pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7]
[ 0.182452] pci 0000:00:16.3: reg 0x14: [mem 0xf7c3d000-0xf7c3dfff]
[ 0.182559] pci 0000:00:19.0: [8086:155a] type 00 class 0x020000
[ 0.182570] pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff]
[ 0.182576] pci 0000:00:19.0: reg 0x14: [mem 0xf7c3c000-0xf7c3cfff]
[ 0.182582] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 0.182629] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.182697] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.182711] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit]
[ 0.182770] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.182854] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.182935] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.183193] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 0.183274] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.183524] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
[ 0.183607] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.183846] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.183860] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c3b000-0xf7c3b3ff]
[ 0.184388] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.184479] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.184657] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.184666] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.184673] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.184678] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.184684] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.184690] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.184696] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c3a000-0xf7c3a7ff]
[ 0.184724] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.184789] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.184803] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c39000-0xf7c390ff 64bit]
[ 0.184819] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.186404] pci 0000:01:00.0: [1217:8520] type 00 class 0x080501
[ 0.186427] pci 0000:01:00.0: reg 0x10: [mem 0xf7b01000-0xf7b01fff]
[ 0.186439] pci 0000:01:00.0: reg 0x14: [mem 0xf7b00000-0xf7b007ff]
[ 0.186589] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 0.190403] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.190408] pci 0000:00:1c.0: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.190545] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
[ 0.190635] pci 0000:02:00.0: reg 0x10: [mem 0xf7a00000-0xf7a01fff 64bit]
[ 0.190931] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.191322] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.191327] pci 0000:00:1c.3: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.191391] acpiphp: Slot [1] registered
[ 0.191402] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.191406] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.191409] pci 0000:00:1c.4: bridge window [mem 0xf7000000-0xf79fffff]
[ 0.191413] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf09fffff 64bit pref]
[ 0.193712] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 0.193753] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.193790] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.193791] ACPI: PCI: Interrupt link LNKC disabled
[ 0.193828] ACPI: PCI: Interrupt link LNKD configured for IRQ 10
[ 0.193866] ACPI: PCI: Interrupt link LNKE configured for IRQ 5
[ 0.193904] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[ 0.193941] ACPI: PCI: Interrupt link LNKG configured for IRQ 3
[ 0.193979] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.193980] ACPI: PCI: Interrupt link LNKH disabled
[ 0.195280] ACPI: EC: interrupt unblocked
[ 0.195282] ACPI: EC: event unblocked
[ 0.195286] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.195287] ACPI: EC: GPE=0x27
[ 0.195288] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete
[ 0.195290] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events
[ 0.195459] iommu: Default domain type: Translated
[ 0.195461] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.195552] SCSI subsystem initialized
[ 0.195558] libata version 3.00 loaded.
[ 0.195558] ACPI: bus type USB registered
[ 0.195558] usbcore: registered new interface driver usbfs
[ 0.195558] usbcore: registered new interface driver hub
[ 0.195558] usbcore: registered new device driver usb
[ 0.195558] pps_core: LinuxPPS API ver. 1 registered
[ 0.195558] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.195558] PTP clock support registered
[ 0.195558] EDAC MC: Ver: 3.0.0
[ 0.196664] NetLabel: Initializing
[ 0.196665] NetLabel: domain hash size = 128
[ 0.196667] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.196681] NetLabel: unlabeled traffic allowed by default
[ 0.196685] mctp: management component transport protocol core
[ 0.196686] NET: Registered PF_MCTP protocol family
[ 0.196689] PCI: Using ACPI for IRQ routing
[ 0.198395] PCI: pci_cache_line_size set to 64 bytes
[ 0.199365] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 0.199365] e820: reserve RAM buffer [mem 0xcfb61000-0xcfffffff]
[ 0.199365] e820: reserve RAM buffer [mem 0xd055c000-0xd3ffffff]
[ 0.199365] e820: reserve RAM buffer [mem 0xd7db4000-0xd7ffffff]
[ 0.199365] e820: reserve RAM buffer [mem 0xd8759000-0xdbffffff]
[ 0.199365] e820: reserve RAM buffer [mem 0xd8f9a000-0xdbffffff]
[ 0.199365] e820: reserve RAM buffer [mem 0xda71c000-0xdbffffff]
[ 0.199365] e820: reserve RAM buffer [mem 0xdbcf6000-0xdbffffff]
[ 0.199365] e820: reserve RAM buffer [mem 0x41ee00000-0x41fffffff]
[ 0.199390] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.199390] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.199390] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.199390] vgaarb: loaded
[ 0.199467] clocksource: Switched to clocksource tsc-early
[ 0.211200] VFS: Disk quotas dquot_6.6.0
[ 0.211214] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.211302] pnp: PnP ACPI init
[ 0.211403] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.211678] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.211681] system 00:01: [io 0xffff] has been reserved
[ 0.211683] system 00:01: [io 0xffff] has been reserved
[ 0.211684] system 00:01: [io 0xffff] has been reserved
[ 0.211686] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.211687] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.211689] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.211690] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.211692] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.211693] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.211763] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.211806] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.212801] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.212805] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.212807] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.212809] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.212811] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.212813] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.212814] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.212816] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.212818] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.212820] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.212822] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 0.212824] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.214100] pnp: PnP ACPI: found 9 devices
[ 0.219826] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.219885] NET: Registered PF_INET protocol family
[ 0.220038] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.223370] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.223390] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.223409] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.223515] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.223848] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.223926] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[ 0.223972] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.224002] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.224069] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.224076] NET: Registered PF_XDP protocol family
[ 0.224088] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.224101] pci 0000:00:1c.0: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.224109] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.224113] pci 0000:00:1c.3: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.224120] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.224122] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.224126] pci 0000:00:1c.4: bridge window [mem 0xf7000000-0xf79fffff]
[ 0.224129] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf09fffff 64bit pref]
[ 0.224135] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.224137] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.224138] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.224140] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000e7fff window]
[ 0.224141] pci_bus 0000:00: resource 8 [mem 0xdf200000-0xfeafffff window]
[ 0.224142] pci_bus 0000:01: resource 1 [mem 0xf7b00000-0xf7bfffff]
[ 0.224144] pci_bus 0000:02: resource 1 [mem 0xf7a00000-0xf7afffff]
[ 0.224145] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.224147] pci_bus 0000:03: resource 1 [mem 0xf7000000-0xf79fffff]
[ 0.224148] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf09fffff 64bit pref]
[ 0.241275] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7d0 took 16420 usecs
[ 0.243170] PCI: CLS 64 bytes, default 64
[ 0.243181] DMAR: Failed to find handle for ACPI object \_SB.PCI0.I2C0
[ 0.243187] DMAR: Failed to find handle for ACPI object \_SB.PCI0.I2C1
[ 0.243189] DMAR: Failed to find handle for ACPI object \_SB.PCI0.UA01
[ 0.243191] DMAR: Failed to find handle for ACPI object \_SB.PCI0.SDHC
[ 0.243204] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.243205] software IO TLB: mapped [mem 0x00000000d3db4000-0x00000000d7db4000] (64MB)
[ 0.243234] Trying to unpack rootfs image as initramfs...
[ 0.243996] Initialise system trusted keyrings
[ 0.244008] Key type blacklist registered
[ 0.244064] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.244091] zbud: loaded
[ 0.244682] integrity: Platform Keyring initialized
[ 0.244686] integrity: Machine keyring initialized
[ 0.262282] NET: Registered PF_ALG protocol family
[ 0.262288] xor: automatically using best checksumming function avx
[ 0.262290] Key type asymmetric registered
[ 0.262292] Asymmetric key parser 'x509' registered
[ 0.725106] Freeing initrd memory: 39544K
[ 0.729338] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.729374] io scheduler mq-deadline registered
[ 0.729376] io scheduler kyber registered
[ 0.729385] io scheduler bfq registered
[ 0.731036] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.731913] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.732749] ACPI: AC: AC Adapter [AC] (on-line)
[ 0.732805] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.732835] ACPI: button: Lid Switch [LID0]
[ 0.732862] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.732883] ACPI: button: Power Button [PBTN]
[ 0.732909] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.732924] ACPI: button: Sleep Button [SBTN]
[ 0.732947] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.732969] ACPI: button: Power Button [PWRF]
[ 0.733874] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.733877] ACPI: thermal: Thermal Zone [THM] (25 C)
[ 0.734011] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.736273] 0000:00:16.3: ttyS4 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A
[ 0.736925] hpet_acpi_add: **no address or irqs in _CRS**
[ 0.736966] Non-volatile memory driver v1.3
[ 0.736972] Linux agpgart interface v0.103
[ 0.737056] ACPI: bus type drm_connector registered
[ 0.737580] ahci 0000:00:1f.2: version 3.0
[ 0.737779] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.747894] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x7 impl SATA mode
[ 0.747898] ahci 0000:00:1f.2: flags: 64bit ncq stag led clo only pio slum part sxs deso sadm sds apst
[ 0.748298] scsi host0: ahci
[ 0.748439] scsi host1: ahci
[ 0.748564] scsi host2: ahci
[ 0.748618] ata1: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a100 irq 45
[ 0.748622] ata2: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a180 irq 45
[ 0.748624] ata3: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a200 irq 45
[ 0.749056] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.749104] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.750208] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
[ 0.750432] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.750472] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.750474] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.750485] ehci-pci 0000:00:1d.0: debug port 2
[ 0.750503] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.750506] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.750540] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[ 0.750543] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.750544] usb usb1: Product: xHCI Host Controller
[ 0.750545] usb usb1: Manufacturer: Linux 6.5.6-300.fc39.x86_64 xhci-hcd
[ 0.750547] usb usb1: SerialNumber: 0000:00:14.0
[ 0.750699] hub 1-0:1.0: USB hub found
[ 0.750727] hub 1-0:1.0: 9 ports detected
[ 0.751612] ACPI: battery: Slot [BAT0] (battery present)
[ 0.752969] ACPI: battery: Slot [BAT1] (battery absent)
[ 0.753762] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
[ 0.753767] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.753769] usb usb3: Product: xHCI Host Controller
[ 0.753771] usb usb3: Manufacturer: Linux 6.5.6-300.fc39.x86_64 xhci-hcd
[ 0.753773] usb usb3: SerialNumber: 0000:00:14.0
[ 0.753883] hub 3-0:1.0: USB hub found
[ 0.753892] hub 3-0:1.0: 4 ports detected
[ 0.754403] usbcore: registered new interface driver usbserial_generic
[ 0.754410] usbserial: USB Serial support registered for generic
[ 0.754423] ehci-pci 0000:00:1d.0: irq 21, io mem 0xf7c3b000
[ 0.754453] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.754713] i8042: **Warning: Keylock active**
[ 0.757174] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.757178] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.757288] mousedev: PS/2 mouse device common for all mice
[ 0.757544] rtc_cmos 00:02: RTC can wake from S4
[ 0.757789] rtc_cmos 00:02: registered as rtc0
[ 0.757823] rtc_cmos 00:02: setting system clock to 2023-12-14T16:49:17 UTC (1702572557)
[ 0.757844] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram
[ 0.757920] device-mapper: **core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not**
be recorded in the IMA log.
[ 0.757927] device-mapper: uevent: version 1.0.3
[ 0.757970] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ 0.758042] intel_pstate: Intel P-state driver initializing
[ 0.758563] hid: raw HID events driver (C) Jiri Kosina
[ 0.758588] usbcore: registered new interface driver usbhid
[ 0.758589] usbhid: USB HID core driver
[ 0.758699] drop_monitor: Initializing network drop monitor service
[ 0.758937] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.761213] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.761305] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[ 0.761309] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.761311] usb usb2: Product: EHCI Host Controller
[ 0.761312] usb usb2: Manufacturer: Linux 6.5.6-300.fc39.x86_64 ehci_hcd
[ 0.761314] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.761475] hub 2-0:1.0: USB hub found
[ 0.761490] hub 2-0:1.0: 3 ports detected
[ 0.773281] Initializing XFRM netlink socket
[ 0.773315] NET: Registered PF_INET6 protocol family
[ 0.778069] Segment Routing with IPv6
[ 0.778072] RPL Segment Routing with IPv6
[ 0.778081] In-situ OAM (IOAM) with IPv6
[ 0.778104] mip6: Mobile IPv6
[ 0.778107] NET: Registered PF_PACKET protocol family
[ 0.778525] microcode: Microcode Update Driver: v2.2.
[ 0.778532] IPI shorthand broadcast: enabled
[ 0.778541] AVX2 version of gcm_enc/dec engaged.
[ 0.778615] AES CTR mode by8 optimization enabled
[ 0.780564] sched_clock: Marking stable (777001605, 3182138)->(808360213, -28176470)
[ 0.780706] registered taskstats version 1
[ 0.780862] Loading compiled-in X.509 certificates
[ 0.791608] Loaded X.509 cert 'Fedora kernel signing key: 8096e35cbead41f260211fbb6aa9a067f06b8413'
[ 0.794127] page_owner is disabled
[ 0.794224] Key type .fscrypt registered
[ 0.794226] Key type fscrypt-provisioning registered
[ 0.794655] Btrfs loaded, zoned=yes, fsverity=yes
[ 0.794694] Key type big_key registered
[ 0.798258] Key type encrypted registered
[ 0.798269] ima: No TPM chip found, activating TPM-bypass!
[ 0.798273] Loading compiled-in module X.509 certificates
[ 0.799008] Loaded X.509 cert 'Fedora kernel signing key: 8096e35cbead41f260211fbb6aa9a067f06b8413'
[ 0.799012] ima: Allocated hash algorithm: sha256
[ 0.799022] ima: No architecture policies found
[ 0.799034] evm: Initialising EVM extended attributes:
[ 0.799035] evm: security.selinux
[ 0.799036] evm: security.SMACK64 (disabled)
[ 0.799037] evm: security.SMACK64EXEC (disabled)
[ 0.799038] evm: security.SMACK64TRANSMUTE (disabled)
[ 0.799039] evm: security.SMACK64MMAP (disabled)
[ 0.799039] evm: security.apparmor (disabled)
[ 0.799040] evm: security.ima
[ 0.799041] evm: security.capability
[ 0.799041] evm: HMAC attrs: 0x1
[ 0.850339] alg: No test for 842 (842-scomp)
[ 0.850365] alg: No test for 842 (842-generic)
[ 0.975482] PM: Magic number: 3:574:843
[ 0.978350] RAS: Correctable Errors collector initialized.
[ 0.978407] clk: Disabling unused clocks
[ 0.992251] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 1.000283] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.060422] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.120048] usb 1-1: New USB device found, idVendor=0da4, idProduct=0008, bcdDevice= 1.00
[ 1.120064] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.120070] usb 1-1: Product: Polar M430
[ 1.120074] usb 1-1: Manufacturer: Polar Electro Oy
[ 1.120078] usb 1-1: SerialNumber: 4687D725
[ 1.123855] hid-generic 0003:0DA4:0008.0001: hiddev96,hidraw0: USB HID v1.11 Device [Polar Electro Oy Polar
M430] on usb-0000:00:14.0-1/input0
[ 1.128688] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
[ 1.128701] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.129362] hub 2-1:1.0: USB hub found
[ 1.129558] hub 2-1:1.0: 8 ports detected
[ 1.237264] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[ 1.302278] tsc: Refined TSC clocksource calibration: 2494.226 MHz
[ 1.302300] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3eb3743e, max_idle_ns: 440795257847
ns
[ 1.302375] clocksource: Switched to clocksource tsc
[ 1.364160] usb 1-2: New USB device found, idVendor=03f0, idProduct=0c54, bcdDevice= 1.00
[ 1.364175] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.364181] usb 1-2: Product: OfficeJet Pro 6970
[ 1.364201] usb 1-2: Manufacturer: HP
[ 1.364207] usb 1-2: SerialNumber: TH96A2N21N
[ 1.373001] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.374713] ata2.00: ATA-9: EMTEC X150 2000GB, W0814A0, max UDMA/133
[ 1.375656] ata2.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.379562] ata2.00: configured for UDMA/133
[ 1.379942] scsi 1:0:0:0: Direct-Access ATA EMTEC X150 2000G 4A0 PQ: 0 ANSI: 5
[ 1.380765] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.380982] sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.381027] sd 1:0:0:0: [sda] Write Protect is off
[ 1.381038] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.381107] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.381219] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 1.383279] sda: sda1 sda2 sda3 sda4
[ 1.383480] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.406254] usb 2-1.3: new low-speed USB device number 3 using ehci-pci
[ 1.489937] usb 2-1.3: New USB device found, idVendor=045e, idProduct=077b, bcdDevice= 0.44
[ 1.489943] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.489946] usb 2-1.3: Product: Comfort Mouse 3000
[ 1.489947] usb 2-1.3: Manufacturer: Microsoft
Edit Nicosss : Correction balises Markdown -> Voir FAQ