Même en nvme ils ont le même souci faut croire…
Du coup je doute que ce soit stable et donc cela explique sans doute ton problème.
Edit : Bizarre quand même, cela ressemble à un rapport d’unités de stockage sur port SATA…
Tu es sur que ce n’est pas un SSD sur port M2 en SATA et non en M2 NVME?
Chez moi le rapport NVME ressemble à ça :
sudo smartctl -aA /dev/nvme1
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.5.5-200.fc38.x86_64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Number: Samsung SSD 970 EVO Plus 1TB
Serial Number: xxxxxxxxxxxxxxxxxxxx
Firmware Version: 2B2QEXM7
PCI Vendor/Subsystem ID: 0x144d
IEEE OUI Identifier: 0x002538
Total NVM Capacity: 1 000 204 886 016 [1,00 TB]
Unallocated NVM Capacity: 0
Controller ID: 4
NVMe Version: 1.3
Number of Namespaces: 1
Namespace 1 Size/Capacity: 1 000 204 886 016 [1,00 TB]
Namespace 1 Utilization: 260 421 906 432 [260 GB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 002538 5531b57e4c
Local Time is: Mon Sep 25 16:51:35 2023 CEST
Firmware Updates (0x16): 3 Slots, no Reset required
Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test
Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp
Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg
Maximum Data Transfer Size: 512 Pages
Warning Comp. Temp. Threshold: 85 Celsius
Critical Comp. Temp. Threshold: 85 Celsius
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 7.80W - - 0 0 0 0 0 0
1 + 6.00W - - 1 1 1 1 0 0
2 + 3.40W - - 2 2 2 2 0 0
3 - 0.0700W - - 3 3 3 3 210 1200
4 - 0.0100W - - 4 4 4 4 2000 8000
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 0
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 41 Celsius
Available Spare: 100%
Available Spare Threshold: 10%
Percentage Used: 0%
Data Units Read: 411 209 [210 GB]
Data Units Written: 1 880 852 [962 GB]
Host Read Commands: 3 571 218
Host Write Commands: 7 616 820
Controller Busy Time: 17
Power Cycles: 70
Power On Hours: 8
Unsafe Shutdowns: 2
Media and Data Integrity Errors: 0
Error Information Log Entries: 89
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Temperature Sensor 1: 41 Celsius
Temperature Sensor 2: 42 Celsius
Error Information (NVMe Log 0x01, 16 of 64 entries)
No Errors Logged
Self-test Log (NVMe Log 0x06)
Self-test status: No self-test in progress
No Self-tests Logged
