BJr,

J'ai installé F36 sur un Asus 14p, genre notebook compact, pas de pavé numérique, ni d'éthernet et micro USB. CG Intel 640, 8go de Ram et SSD.

Le ventilo tourne beaucoup, il est donc de fait, bruyant. J'ai fait l'essai avec Ubuntu, pareil, il n'y a qu'avec Debian qu'il est silencieux car le ventilo ne se déclenche que si je le pousse un peu.

Comment expliquer ça ? J'aimerais bien trouver une solution avant de remettre Debian ou LMDE.
Bonjour, il faudrait en savoir plus sur ta config.
Pour commencer, quels sont les retours des commandes
$ lspci
$ lsusb
$ dmesg
$ sensors
Merci de donner le retour de ces commandes de manière individuelle en utilisant les balises code <> https://forums.fedora-fr.org/help.php#bbcode et en précisant le prompt, la commande complète ainsi que le retour complet de celle-ci.
winmandrake wrote:Bonjour, il faudrait en savoir plus sur ta config.
CPU
Intel Core I5-825OU 1,6ghz
4 cores 8 coeurs

RAM
8go

Carte Mère
1.0/X406UAR

CG
1600/900
Mesa Intel UHD Graphics (KBL GT2)

DD
SSD 256go
Jean Luc , bonjour.
Quand Nicoss te demande le résultat des commandes :
$ lspci
$ lsusb
$ dmesg
$ sensors
cela signifie que tu nous retourne les résultats bruts de ces commandes avec les paramètres code [] ..
voir : https://forums.fedora-fr.org/help.php#bbcode

exemple :
$ lspci
00:00.0 Host bridge: Intel Corporation 8th Gen Core 4-core Processor Host Bridge/DRAM Registers [Coffee Lake H] (rev 07)
00:01.0 PCI bridge: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) (rev 07)
00:02.0 VGA compatible controller: Intel Corporation CoffeeLake-H GT2 [UHD Graphics 630]
00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 07)
00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model
00:12.0 Signal processing controller: Intel Corporation Cannon Lake PCH Thermal Controller (rev 10)
00:14.0 USB controller: Intel Corporation Cannon Lake PCH USB 3.1 xHCI Host Controller (rev 10)
00:14.2 RAM memory: Intel Corporation Cannon Lake PCH Shared SRAM (rev 10)
00:15.0 Serial bus controller: Intel Corporation Cannon Lake PCH Serial IO I2C Controller #0 (rev 10)
00:15.1 Serial bus controller: Intel Corporation Cannon Lake PCH Serial IO I2C Controller #1 (rev 10)
00:16.0 Communication controller: Intel Corporation Cannon Lake PCH HECI Controller (rev 10)
00:17.0 SATA controller: Intel Corporation Cannon Lake Mobile PCH SATA AHCI Controller (rev 10)
00:1d.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #9 (rev f0)
00:1d.4 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #13 (rev f0)
00:1d.5 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #14 (rev f0)
00:1e.0 Communication controller: Intel Corporation Cannon Lake PCH Serial IO UART Host Controller (rev 10)
00:1f.0 ISA bridge: Intel Corporation HM470 Chipset LPC/eSPI Controller (rev 10)
00:1f.3 Audio device: Intel Corporation Cannon Lake PCH cAVS (rev 10)
00:1f.4 SMBus: Intel Corporation Cannon Lake PCH SMBus Controller (rev 10)
00:1f.5 Serial bus controller: Intel Corporation Cannon Lake PCH SPI Controller (rev 10)
01:00.0 VGA compatible controller: NVIDIA Corporation GP107M [GeForce GTX 1050 Ti Mobile] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GP107GL High Definition Audio Controller (rev a1)
06:00.0 Non-Volatile memory controller: Sandisk Corp PC SN520 NVMe SSD (rev 01)
07:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31)
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
Sinon , nous tournons en rond et ne pouvons t'aider. voir:
https://www.gnurou.org/writing/smartquestionsfr/
Nicosss wrote:Pour commencer, quels sont les retours des commandes
$ lspci
$ lsusb
$ dmesg
$ sensors
Merci de donner le retour de ces commandes de manière individuelle en utilisant les balises code <> https://forums.fedora-fr.org/help.php#bbcode et en précisant le prompt, la commande complète ainsi que le retour complet de celle-ci.
Voilà, voilà, j'espère que tout y est. Pas de "sensors"
jeanluc@asus:~$ lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 08)
00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 620 (rev 07)
00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 08)
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:15.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 (rev 21)
00:15.1 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #1 (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 (rev f1)
00:1e.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO UART Controller #0 (rev 21)
00:1e.2 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO SPI Controller #0 (rev 21)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point LPC Controller/eSPI Controller (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
01:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31)
jeanluc@asus:~$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 13d3:3500 IMC Networks 
Bus 001 Device 004: ID 13d3:56a2 IMC Networks USB2.0 HD UVC WebCam
Bus 001 Device 003: ID 1058:07a8 Western Digital Technologies, Inc. My Passport (WDBBEP), My Passport for Mac (WDBLUZ)
Bus 001 Device 002: ID 0461:4dfb Primax Electronics, Ltd USB Optical Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
eanluc@asus:~$ dmesg
[    0.000000] microcode: microcode updated early to revision 0xec, date = 2021-04-28
[    0.000000] Linux version 5.17.5-300.fc36.x86_64 (mockbuild@bkernel01.iad2.fedoraproject.org) (gcc (GCC) 12.0.1 20220413 (Red Hat 12.0.1-0), GNU ld version 2.37-24.fc36) #1 SMP PREEMPT Thu Apr 28 15:51:30 UTC 2022
[    0.000000] Command line: BOOT_IMAGE=(hd0,gpt1)/boot/vmlinuz-5.17.5-300.fc36.x86_64 root=UUID=896508c0-7d20-4303-976e-0465bd293f66 ro resume=UUID=2ea924f9-766b-47bc-a878-a4f9208082ff rhgb quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] signal: max sigframe size: 2032
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000092b32fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000092b33000-0x0000000092b33fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000092b34000-0x0000000092b34fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000092b35000-0x00000000984cafff] usable
[    0.000000] BIOS-e820: [mem 0x00000000984cb000-0x000000009a570fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009a571000-0x000000009a5b7fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009a5b8000-0x000000009a617fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009a618000-0x000000009ab7efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009ab7f000-0x000000009abfefff] usable
[    0.000000] BIOS-e820: [mem 0x000000009abff000-0x000000009fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x9127e018-0x9128e057] usable ==> usable
[    0.000000] e820: update [mem 0x9127e018-0x9128e057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000009127e017] usable
[    0.000000] reserve setup_data: [mem 0x000000009127e018-0x000000009128e057] usable
[    0.000000] reserve setup_data: [mem 0x000000009128e058-0x0000000092b32fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000092b33000-0x0000000092b33fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000092b34000-0x0000000092b34fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000092b35000-0x00000000984cafff] usable
[    0.000000] reserve setup_data: [mem 0x00000000984cb000-0x000000009a570fff] reserved
[    0.000000] reserve setup_data: [mem 0x000000009a571000-0x000000009a5b7fff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000009a5b8000-0x000000009a617fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000009a618000-0x000000009ab7efff] reserved
[    0.000000] reserve setup_data: [mem 0x000000009ab7f000-0x000000009abfefff] usable
[    0.000000] reserve setup_data: [mem 0x000000009abff000-0x000000009fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000025effffff] usable
[    0.000000] efi: EFI v2.60 by American Megatrends
[    0.000000] efi: TPMFinalLog=0x9a5e7000 ACPI 2.0=0x9a57f000 ACPI=0x9a57f000 SMBIOS=0x9aa0a000 SMBIOS 3.0=0x9aa09000 ESRT=0x96ee2918 MOKvar=0x96df7000 RNG=0x9aa06b18 TPMEventLog=0x92c0b018 
[    0.000000] efi: seeding entropy pool
[    0.000000] random: fast init done
[    0.000000] secureboot: Secure boot disabled
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. X406UAR/X406UAR, BIOS X406UAR.312 06/04/2019
[    0.000000] tsc: Detected 1800.000 MHz processor
[    0.000000] [Firmware Bug]: TSC ADJUST: CPU0: -582237991 force to 0
[    0.001117] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001122] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001134] last_pfn = 0x25f000 max_arch_pfn = 0x400000000
[    0.001382] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.003040] last_pfn = 0x9abff max_arch_pfn = 0x400000000
[    0.023969] esrt: Reserving ESRT space from 0x0000000096ee2918 to 0x0000000096ee2950.
[    0.023977] e820: update [mem 0x96ee2000-0x96ee2fff] usable ==> reserved
[    0.023998] e820: update [mem 0x96df7000-0x96df7fff] usable ==> reserved
[    0.024021] Using GB pages for direct mapping
[    0.024978] secureboot: Secure boot disabled
[    0.024980] RAMDISK: [mem 0x5ebac000-0x6003efff]
[    0.024988] ACPI: Early table checksum verification disabled
[    0.024992] ACPI: RSDP 0x000000009A57F000 000024 (v02 _ASUS_)
[    0.024999] ACPI: XSDT 0x000000009A57F0B0 0000E4 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.025008] ACPI: FACP 0x000000009A5AAEF8 000114 (v06 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.025018] ACPI: DSDT 0x000000009A57F228 02BCCC (v02 _ASUS_ Notebook 01072009 INTL 20160422)
[    0.025023] ACPI: FACS 0x000000009A5E6F00 000040
[    0.025027] ACPI: APIC 0x000000009A5AB010 0000BC (v03 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.025032] ACPI: FPDT 0x000000009A5AB0D0 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.025037] ACPI: FIDT 0x000000009A5AB118 00009C (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.025042] ACPI: ECDT 0x000000009A5AB1B8 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.025047] ACPI: MCFG 0x000000009A5AB280 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[    0.025052] ACPI: SSDT 0x000000009A5AB2C0 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
[    0.025057] ACPI: SSDT 0x000000009A5AB620 006DD3 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[    0.025062] ACPI: MSDM 0x000000009A5B23F8 000055 (v03 _ASUS_ Notebook 01072009 ASUS 00000001)
[    0.025067] ACPI: SSDT 0x000000009A5B2450 003147 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.025072] ACPI: HPET 0x000000009A5B5598 000038 (v01 INTEL  KBL-ULT  00000001 MSFT 0000005F)
[    0.025077] ACPI: SSDT 0x000000009A5B55D0 000024 (v02 INTEL  OEM_RTD3 00001000 INTL 20160422)
[    0.025081] ACPI: UEFI 0x000000009A5B55F8 000042 (v01 _ASUS_ Notebook 00000002      01000013)
[    0.025087] ACPI: SSDT 0x000000009A5B5640 0017AE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.025091] ACPI: LPIT 0x000000009A5B6DF0 000094 (v01 INTEL  KBL-ULT  00000000 MSFT 0000005F)
[    0.025096] ACPI: SSDT 0x000000009A5B6E88 000141 (v02 INTEL  HdaDsp   00000000 INTL 20160422)
[    0.025101] ACPI: SSDT 0x000000009A5B6FD0 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
[    0.025106] ACPI: SSDT 0x000000009A5B7270 000517 (v02 INTEL  TbtTypeC 00000000 INTL 20160422)
[    0.025111] ACPI: DBGP 0x000000009A5B7788 000034 (v01 INTEL           00000002 MSFT 0000005F)
[    0.025116] ACPI: DBG2 0x000000009A5B77C0 000054 (v00 INTEL           00000002 MSFT 0000005F)
[    0.025121] ACPI: DMAR 0x000000009A5B7818 000138 (v01 INTEL  KBL      00000001 INTL 00000001)
[    0.025126] ACPI: BGRT 0x000000009A5B7950 000038 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.025131] ACPI: TPM2 0x000000009A5B7988 000034 (v03 _ASUS_ Notebook 00000001 AMI  00000000)
[    0.025135] ACPI: WSMT 0x000000009A5B79C0 000028 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.025139] ACPI: Reserving FACP table memory at [mem 0x9a5aaef8-0x9a5ab00b]
[    0.025143] ACPI: Reserving DSDT table memory at [mem 0x9a57f228-0x9a5aaef3]
[    0.025144] ACPI: Reserving FACS table memory at [mem 0x9a5e6f00-0x9a5e6f3f]
[    0.025146] ACPI: Reserving APIC table memory at [mem 0x9a5ab010-0x9a5ab0cb]
[    0.025148] ACPI: Reserving FPDT table memory at [mem 0x9a5ab0d0-0x9a5ab113]
[    0.025150] ACPI: Reserving FIDT table memory at [mem 0x9a5ab118-0x9a5ab1b3]
[    0.025151] ACPI: Reserving ECDT table memory at [mem 0x9a5ab1b8-0x9a5ab278]
[    0.025153] ACPI: Reserving MCFG table memory at [mem 0x9a5ab280-0x9a5ab2bb]
[    0.025155] ACPI: Reserving SSDT table memory at [mem 0x9a5ab2c0-0x9a5ab618]
[    0.025157] ACPI: Reserving SSDT table memory at [mem 0x9a5ab620-0x9a5b23f2]
[    0.025158] ACPI: Reserving MSDM table memory at [mem 0x9a5b23f8-0x9a5b244c]
[    0.025160] ACPI: Reserving SSDT table memory at [mem 0x9a5b2450-0x9a5b5596]
[    0.025162] ACPI: Reserving HPET table memory at [mem 0x9a5b5598-0x9a5b55cf]
[    0.025164] ACPI: Reserving SSDT table memory at [mem 0x9a5b55d0-0x9a5b55f3]
[    0.025166] ACPI: Reserving UEFI table memory at [mem 0x9a5b55f8-0x9a5b5639]
[    0.025167] ACPI: Reserving SSDT table memory at [mem 0x9a5b5640-0x9a5b6ded]
[    0.025169] ACPI: Reserving LPIT table memory at [mem 0x9a5b6df0-0x9a5b6e83]
[    0.025171] ACPI: Reserving SSDT table memory at [mem 0x9a5b6e88-0x9a5b6fc8]
[    0.025173] ACPI: Reserving SSDT table memory at [mem 0x9a5b6fd0-0x9a5b726e]
[    0.025175] ACPI: Reserving SSDT table memory at [mem 0x9a5b7270-0x9a5b7786]
[    0.025177] ACPI: Reserving DBGP table memory at [mem 0x9a5b7788-0x9a5b77bb]
[    0.025178] ACPI: Reserving DBG2 table memory at [mem 0x9a5b77c0-0x9a5b7813]
[    0.025180] ACPI: Reserving DMAR table memory at [mem 0x9a5b7818-0x9a5b794f]
[    0.025182] ACPI: Reserving BGRT table memory at [mem 0x9a5b7950-0x9a5b7987]
[    0.025184] ACPI: Reserving TPM2 table memory at [mem 0x9a5b7988-0x9a5b79bb]
[    0.025186] ACPI: Reserving WSMT table memory at [mem 0x9a5b79c0-0x9a5b79e7]
[    0.025351] No NUMA configuration found
[    0.025353] Faking a node at [mem 0x0000000000000000-0x000000025effffff]
[    0.025371] NODE_DATA(0) allocated [mem 0x25efd5000-0x25effffff]
[    0.046339] Zone ranges:
[    0.046341]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.046345]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.046348]   Normal   [mem 0x0000000100000000-0x000000025effffff]
[    0.046351]   Device   empty
[    0.046352] Movable zone start for each node
[    0.046356] Early memory node ranges
[    0.046357]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.046360]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.046362]   node   0: [mem 0x0000000000100000-0x0000000092b32fff]
[    0.046364]   node   0: [mem 0x0000000092b35000-0x00000000984cafff]
[    0.046365]   node   0: [mem 0x000000009ab7f000-0x000000009abfefff]
[    0.046367]   node   0: [mem 0x0000000100000000-0x000000025effffff]
[    0.046370] Initmem setup node 0 [mem 0x0000000000001000-0x000000025effffff]
[    0.046376] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.046380] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.046413] On node 0, zone DMA: 98 pages in unavailable ranges
[    0.052533] On node 0, zone DMA32: 2 pages in unavailable ranges
[    0.052720] On node 0, zone DMA32: 9908 pages in unavailable ranges
[    0.067625] On node 0, zone Normal: 21505 pages in unavailable ranges
[    0.067724] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.067743] Reserving Intel graphics memory at [mem 0x9c000000-0x9fffffff]
[    0.068226] ACPI: PM-Timer IO Port: 0x1808
[    0.068237] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.068240] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.068242] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.068243] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.068245] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.068246] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.068247] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.068249] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.068282] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.068286] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.068289] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.068295] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.068297] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.068308] e820: update [mem 0x96d87000-0x96db5fff] usable ==> reserved
[    0.068325] TSC deadline timer available
[    0.068327] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.068364] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.068368] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.068372] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[    0.068375] PM: hibernation: Registered nosave memory: [mem 0x9127e000-0x9127efff]
[    0.068379] PM: hibernation: Registered nosave memory: [mem 0x9128e000-0x9128efff]
[    0.068382] PM: hibernation: Registered nosave memory: [mem 0x92b33000-0x92b33fff]
[    0.068383] PM: hibernation: Registered nosave memory: [mem 0x92b34000-0x92b34fff]
[    0.068387] PM: hibernation: Registered nosave memory: [mem 0x96d87000-0x96db5fff]
[    0.068390] PM: hibernation: Registered nosave memory: [mem 0x96df7000-0x96df7fff]
[    0.068393] PM: hibernation: Registered nosave memory: [mem 0x96ee2000-0x96ee2fff]
[    0.068397] PM: hibernation: Registered nosave memory: [mem 0x984cb000-0x9a570fff]
[    0.068398] PM: hibernation: Registered nosave memory: [mem 0x9a571000-0x9a5b7fff]
[    0.068399] PM: hibernation: Registered nosave memory: [mem 0x9a5b8000-0x9a617fff]
[    0.068401] PM: hibernation: Registered nosave memory: [mem 0x9a618000-0x9ab7efff]
[    0.068404] PM: hibernation: Registered nosave memory: [mem 0x9abff000-0x9fffffff]
[    0.068406] PM: hibernation: Registered nosave memory: [mem 0xa0000000-0xefffffff]
[    0.068407] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.068408] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
[    0.068410] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.068411] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.068412] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.068414] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.068415] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.068416] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
[    0.068418] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.068419] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.068420] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.068423] [mem 0xa0000000-0xefffffff] available for PCI devices
[    0.068425] Booting paravirtualized kernel on bare hardware
[    0.068429] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.079249] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.079572] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144
[    0.079586] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152
[    0.079590] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.079645] Fallback order for Node 0: 0 
[    0.079650] Built 1 zonelists, mobility grouping on.  Total pages: 2029171
[    0.079652] Policy zone: Normal
[    0.079654] Kernel command line: BOOT_IMAGE=(hd0,gpt1)/boot/vmlinuz-5.17.5-300.fc36.x86_64 root=UUID=896508c0-7d20-4303-976e-0465bd293f66 ro resume=UUID=2ea924f9-766b-47bc-a878-a4f9208082ff rhgb quiet
[    0.079778] Unknown kernel command line parameters "rhgb BOOT_IMAGE=(hd0,gpt1)/boot/vmlinuz-5.17.5-300.fc36.x86_64", will be passed to user space.
[    0.080516] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.080901] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.081044] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.126695] Memory: 7852592K/8246164K available (16393K kernel code, 3660K rwdata, 11176K rodata, 2708K init, 6180K bss, 393312K reserved, 0K cma-reserved)
[    0.126704] random: get_random_u64 called from __kmem_cache_create+0x2a/0x530 with crng_init=1
[    0.126896] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.126916] Kernel/User page tables isolation: enabled
[    0.126950] ftrace: allocating 49727 entries in 195 pages
[    0.142121] ftrace: allocated 195 pages with 4 groups
[    0.143538] Dynamic Preempt: voluntary
[    0.143588] rcu: Preemptible hierarchical RCU implementation.
[    0.143589] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.143592] 	Trampoline variant of Tasks RCU enabled.
[    0.143593] 	Rude variant of Tasks RCU enabled.
[    0.143593] 	Tracing variant of Tasks RCU enabled.
[    0.143595] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.143596] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.151812] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[    0.152457] random: crng init done (trusting CPU's manufacturer)
[    0.152513] Console: colour dummy device 80x25
[    0.152538] printk: console [tty0] enabled
[    0.152570] ACPI: Core revision 20211217
[    0.152995] hpet: HPET dysfunctional in PC10. Force disabled.
[    0.152997] APIC: Switch to symmetric I/O mode setup
[    0.153001] DMAR: Host address width 39
[    0.153003] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.153014] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.153019] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.153024] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.153028] DMAR: RMRR base: 0x00000098e79000 end: 0x00000098e98fff
[    0.153031] DMAR: RMRR base: 0x0000009b800000 end: 0x0000009fffffff
[    0.153033] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[    0.153035] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[    0.153036] DMAR: ANDD device: 7 name: \_SB.PCI0.SPI0
[    0.153037] DMAR: ANDD device: 9 name: \_SB.PCI0.UA00
[    0.153040] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.153042] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.153044] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.154953] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.154955] x2apic enabled
[    0.154974] Switched APIC routing to cluster x2apic.
[    0.158902] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns
[    0.158918] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.00 BogoMIPS (lpj=1800000)
[    0.158930] pid_max: default: 32768 minimum: 301
[    0.159908] LSM: Security Framework initializing
[    0.159908] Yama: becoming mindful.
[    0.159908] SELinux:  Initializing.
[    0.159908] LSM support for eBPF active
[    0.159908] landlock: Up and running.
[    0.159908] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.159908] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.159908] x86/cpu: SGX disabled by BIOS.
[    0.159908] CPU0: Thermal monitoring enabled (TM1)
[    0.159908] process: using mwait in idle threads
[    0.159908] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.159908] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.159908] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.159908] Spectre V2 : Mitigation: Retpolines
[    0.159908] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.159908] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.159908] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.159908] Spectre V2 : User space: Mitigation: STIBP via prctl
[    0.159908] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.159908] SRBDS: Mitigation: Microcode
[    0.159908] MDS: Mitigation: Clear CPU buffers
[    0.159908] Freeing SMP alternatives memory: 44K
[    0.159908] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1934
[    0.159908] smpboot: CPU0: Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz (family: 0x6, model: 0x8e, stepping: 0xa)
[    0.159908] cblist_init_generic: Setting adjustable number of callback queues.
[    0.159908] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.159908] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.159908] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.159908] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.159908] ... version:                4
[    0.159908] ... bit width:              48
[    0.159908] ... generic registers:      4
[    0.159908] ... value mask:             0000ffffffffffff
[    0.159908] ... max period:             00007fffffffffff
[    0.159908] ... fixed-purpose events:   3
[    0.159908] ... event mask:             000000070000000f
[    0.159908] rcu: Hierarchical SRCU implementation.
[    0.160915] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.161056] smp: Bringing up secondary CPUs ...
[    0.161204] x86: Booting SMP configuration:
[    0.161206] .... node  #0, CPUs:      #1
[    0.007733] [Firmware Bug]: TSC ADJUST differs within socket(s), fixing all errors
[    0.165072]  #2 #3 #4
[    0.173165] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.173165]  #5 #6 #7
[    0.175990] smp: Brought up 1 node, 8 CPUs
[    0.175990] smpboot: Max logical packages: 1
[    0.175990] smpboot: Total of 8 processors activated (28800.00 BogoMIPS)
[    0.177428] devtmpfs: initialized
[    0.177428] x86/mm: Memory block size: 128MB
[    0.178618] ACPI: PM: Registering ACPI NVS region [mem 0x92b33000-0x92b33fff] (4096 bytes)
[    0.178618] ACPI: PM: Registering ACPI NVS region [mem 0x9a5b8000-0x9a617fff] (393216 bytes)
[    0.178618] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.178618] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.178618] pinctrl core: initialized pinctrl subsystem
[    0.179130] PM: RTC time: 12:32:56, date: 2022-05-07
[    0.179341] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.179517] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.179526] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.179535] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.179551] audit: initializing netlink subsys (disabled)
[    0.179563] audit: type=2000 audit(1651926776.020:1): state=initialized audit_enabled=0 res=1
[    0.179563] thermal_sys: Registered thermal governor 'fair_share'
[    0.179563] thermal_sys: Registered thermal governor 'bang_bang'
[    0.179563] thermal_sys: Registered thermal governor 'step_wise'
[    0.179563] thermal_sys: Registered thermal governor 'user_space'
[    0.179563] cpuidle: using governor menu
[    0.179925] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.179928] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.180042] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.180049] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.180068] PCI: Using configuration type 1 for base access
[    0.180559] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.183145] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.183162] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.183162] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.183162] cryptd: max_cpu_qlen set to 1000
[    0.183162] raid6: skipped pq benchmark and selected avx2x4
[    0.183162] raid6: using avx2x2 recovery algorithm
[    0.183162] ACPI: Added _OSI(Module Device)
[    0.183162] ACPI: Added _OSI(Processor Device)
[    0.183162] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.183162] ACPI: Added _OSI(Processor Aggregator Device)
[    0.183162] ACPI: Added _OSI(Linux-Dell-Video)
[    0.183162] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.183162] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.250001] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.252375] ACPI: EC: EC started
[    0.252377] ACPI: EC: interrupt blocked
[    0.255119] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.255121] ACPI: EC: Boot ECDT EC used to handle transactions
[    0.264376] ACPI: Dynamic OEM Table Load:
[    0.264388] ACPI: SSDT 0xFFFF9EDB412ED800 00058B (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.266446] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
[    0.268786] ACPI: Dynamic OEM Table Load:
[    0.268796] ACPI: SSDT 0xFFFF9EDB41201C00 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.270839] ACPI: Dynamic OEM Table Load:
[    0.270847] ACPI: SSDT 0xFFFF9EDB41451900 0000BA (v02 PmRef  Cpu0Hwp  00003000 INTL 20160422)
[    0.272738] ACPI: Dynamic OEM Table Load:
[    0.272747] ACPI: SSDT 0xFFFF9EDB412E8000 000628 (v02 PmRef  HwpLvt   00003000 INTL 20160422)
[    0.275166] ACPI: Dynamic OEM Table Load:
[    0.275180] ACPI: SSDT 0xFFFF9EDB40183000 000D14 (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.278148] ACPI: Dynamic OEM Table Load:
[    0.278157] ACPI: SSDT 0xFFFF9EDB41200800 000317 (v02 PmRef  ApHwp    00003000 INTL 20160422)
[    0.280239] ACPI: Dynamic OEM Table Load:
[    0.280247] ACPI: SSDT 0xFFFF9EDB41206400 00030A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.286662] ACPI: Interpreter enabled
[    0.286736] ACPI: PM: (supports S0 S3 S4 S5)
[    0.286738] ACPI: Using IOAPIC for interrupt routing
[    0.286803] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.288421] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.295353] ACPI: PM: Power Resource [WRST]
[    0.295546] ACPI: PM: Power Resource [WRST]
[    0.295733] ACPI: PM: Power Resource [WRST]
[    0.295922] ACPI: PM: Power Resource [WRST]
[    0.296113] ACPI: PM: Power Resource [WRST]
[    0.296628] ACPI: PM: Power Resource [WRST]
[    0.296822] ACPI: PM: Power Resource [WRST]
[    0.297019] ACPI: PM: Power Resource [WRST]
[    0.297211] ACPI: PM: Power Resource [WRST]
[    0.297397] ACPI: PM: Power Resource [WRST]
[    0.297890] ACPI: PM: Power Resource [WRST]
[    0.298088] ACPI: PM: Power Resource [WRST]
[    0.298274] ACPI: PM: Power Resource [WRST]
[    0.298461] ACPI: PM: Power Resource [WRST]
[    0.298647] ACPI: PM: Power Resource [WRST]
[    0.298834] ACPI: PM: Power Resource [WRST]
[    0.299030] ACPI: PM: Power Resource [WRST]
[    0.299536] ACPI: PM: Power Resource [WRST]
[    0.299722] ACPI: PM: Power Resource [WRST]
[    0.299913] ACPI: PM: Power Resource [WRST]
[    0.318247] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[    0.318273] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.320440] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[    0.320443] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.321545] PCI host bridge to bus 0000:00
[    0.321549] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.321553] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.321556] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
[    0.321558] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xefffffff window]
[    0.321561] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.321563] pci_bus 0000:00: root bus resource [bus 00-7e]
[    0.321703] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000
[    0.321832] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000
[    0.321848] pci 0000:00:02.0: reg 0x10: [mem 0xee000000-0xeeffffff 64bit]
[    0.321859] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.321867] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.321896] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.322151] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.322169] pci 0000:00:04.0: reg 0x10: [mem 0xef220000-0xef227fff 64bit]
[    0.322649] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.322679] pci 0000:00:14.0: reg 0x10: [mem 0xef210000-0xef21ffff 64bit]
[    0.322773] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.323801] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.323831] pci 0000:00:14.2: reg 0x10: [mem 0xef23a000-0xef23afff 64bit]
[    0.324148] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[    0.324360] pci 0000:00:15.0: reg 0x10: [mem 0xef239000-0xef239fff 64bit]
[    0.325691] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[    0.325904] pci 0000:00:15.1: reg 0x10: [mem 0xef238000-0xef238fff 64bit]
[    0.327133] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.327164] pci 0000:00:16.0: reg 0x10: [mem 0xef237000-0xef237fff 64bit]
[    0.327262] pci 0000:00:16.0: PME# supported from D3hot
[    0.328012] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[    0.328036] pci 0000:00:17.0: reg 0x10: [mem 0xef230000-0xef231fff]
[    0.328047] pci 0000:00:17.0: reg 0x14: [mem 0xef236000-0xef2360ff]
[    0.328058] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.328069] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.328079] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.328090] pci 0000:00:17.0: reg 0x24: [mem 0xef235000-0xef2357ff]
[    0.328151] pci 0000:00:17.0: PME# supported from D3hot
[    0.328590] pci 0000:00:1c.0: [8086:9d15] type 01 class 0x060400
[    0.328723] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.329713] pci 0000:00:1e.0: [8086:9d27] type 00 class 0x118000
[    0.329926] pci 0000:00:1e.0: reg 0x10: [mem 0xef234000-0xef234fff 64bit]
[    0.331284] pci 0000:00:1e.2: [8086:9d29] type 00 class 0x118000
[    0.331497] pci 0000:00:1e.2: reg 0x10: [mem 0xef233000-0xef233fff 64bit]
[    0.332707] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
[    0.333223] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.333244] pci 0000:00:1f.2: reg 0x10: [mem 0xef22c000-0xef22ffff]
[    0.333664] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
[    0.333695] pci 0000:00:1f.3: reg 0x10: [mem 0xef228000-0xef22bfff 64bit]
[    0.333728] pci 0000:00:1f.3: reg 0x20: [mem 0xef200000-0xef20ffff 64bit]
[    0.333792] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.335179] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.335243] pci 0000:00:1f.4: reg 0x10: [mem 0xef232000-0xef2320ff 64bit]
[    0.335316] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.336055] pci 0000:01:00.0: [168c:0042] type 00 class 0x028000
[    0.336104] pci 0000:01:00.0: reg 0x10: [mem 0xef000000-0xef1fffff 64bit]
[    0.336465] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.337288] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.337296] pci 0000:00:1c.0:   bridge window [mem 0xef000000-0xef1fffff]
[    0.341722] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[    0.341805] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.341885] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.341971] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.342050] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[    0.342129] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[    0.342208] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.342286] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.364925] ACPI: EC: interrupt unblocked
[    0.364928] ACPI: EC: event unblocked
[    0.364940] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.364943] ACPI: EC: GPE=0x50
[    0.364945] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot ECDT EC initialization complete
[    0.364948] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
[    0.365062] iommu: Default domain type: Translated 
[    0.365062] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.365062] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.365062] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.365062] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.365062] vgaarb: loaded
[    0.365062] SCSI subsystem initialized
[    0.365062] libata version 3.00 loaded.
[    0.365062] ACPI: bus type USB registered
[    0.365062] usbcore: registered new interface driver usbfs
[    0.365062] usbcore: registered new interface driver hub
[    0.365062] usbcore: registered new device driver usb
[    0.365062] pps_core: LinuxPPS API ver. 1 registered
[    0.365062] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.365062] PTP clock support registered
[    0.365076] EDAC MC: Ver: 3.0.0
[    0.365953] Registered efivars operations
[    0.366241] NetLabel: Initializing
[    0.366243] NetLabel:  domain hash size = 128
[    0.366244] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.366267] NetLabel:  unlabeled traffic allowed by default
[    0.366272] mctp: management component transport protocol core
[    0.366274] NET: Registered PF_MCTP protocol family
[    0.366278] PCI: Using ACPI for IRQ routing
[    0.380605] PCI: pci_cache_line_size set to 64 bytes
[    0.380949] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.380953] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.380954] e820: reserve RAM buffer [mem 0x9127e018-0x93ffffff]
[    0.380957] e820: reserve RAM buffer [mem 0x92b33000-0x93ffffff]
[    0.380959] e820: reserve RAM buffer [mem 0x96d87000-0x97ffffff]
[    0.380961] e820: reserve RAM buffer [mem 0x96df7000-0x97ffffff]
[    0.380963] e820: reserve RAM buffer [mem 0x96ee2000-0x97ffffff]
[    0.380964] e820: reserve RAM buffer [mem 0x984cb000-0x9bffffff]
[    0.380966] e820: reserve RAM buffer [mem 0x9abff000-0x9bffffff]
[    0.380968] e820: reserve RAM buffer [mem 0x25f000000-0x25fffffff]
[    0.381102] clocksource: Switched to clocksource tsc-early
[    0.401602] VFS: Disk quotas dquot_6.6.0
[    0.401619] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.401740] pnp: PnP ACPI init
[    0.402169] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.402175] system 00:00: [io  0xffff] has been reserved
[    0.402178] system 00:00: [io  0xffff] has been reserved
[    0.402181] system 00:00: [io  0xffff] has been reserved
[    0.402183] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.402185] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.402418] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.403018] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.403023] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.403027] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.403030] system 00:04: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.403040] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.403043] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.403046] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.403050] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.403052] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.403056] system 00:04: [mem 0xeffe0000-0xefffffff] has been reserved
[    0.403122] system 00:05: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.403127] system 00:05: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.403130] system 00:05: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.403133] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.403136] system 00:05: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.403138] system 00:05: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.403141] system 00:05: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.403637] system 00:06: [io  0xff00-0xfffe] has been reserved
[    0.405373] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved
[    0.405377] system 00:07: [mem 0xfe028000-0xfe028fff] has been reserved
[    0.407168] pnp: PnP ACPI: found 8 devices
[    0.414220] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.414305] NET: Registered PF_INET protocol family
[    0.414446] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.416193] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.416232] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.416330] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.416502] TCP: Hash tables configured (established 65536 bind 65536)
[    0.416592] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[    0.416632] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.416658] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.416729] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.416739] NET: Registered PF_XDP protocol family
[    0.416751] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.416767] pci 0000:00:1c.0:   bridge window [mem 0xef000000-0xef1fffff]
[    0.416778] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.416781] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.416784] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000fffff window]
[    0.416786] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xefffffff window]
[    0.416789] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.416791] pci_bus 0000:01: resource 1 [mem 0xef000000-0xef1fffff]
[    0.417648] PCI: CLS 64 bytes, default 64
[    0.417676] DMAR: ACPI device "device:71" under DMAR at fed91000 as 00:15.0
[    0.417685] DMAR: ACPI device "device:72" under DMAR at fed91000 as 00:15.1
[    0.417692] DMAR: ACPI device "device:73" under DMAR at fed91000 as 00:1e.2
[    0.417698] DMAR: ACPI device "device:74" under DMAR at fed91000 as 00:1e.0
[    0.417733] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.417735] software IO TLB: mapped [mem 0x000000008d27e000-0x000000009127e000] (64MB)
[    0.417793] Trying to unpack rootfs image as initramfs...
[    0.419681] Initialise system trusted keyrings
[    0.419695] Key type blacklist registered
[    0.419765] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.422677] zbud: loaded
[    0.423820] integrity: Platform Keyring initialized
[    0.438314] NET: Registered PF_ALG protocol family
[    0.438317] xor: automatically using best checksumming function   avx       
[    0.438320] Key type asymmetric registered
[    0.438322] Asymmetric key parser 'x509' registered
[    0.863741] Freeing initrd memory: 21068K
[    0.870561] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[    0.870597] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.870647] io scheduler mq-deadline registered
[    0.870649] io scheduler kyber registered
[    0.870705] io scheduler bfq registered
[    0.872406] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.873338] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
[    0.873443] pcieport 0000:00:1c.0: AER: enabled with IRQ 122
[    0.873587] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.874798] ACPI: AC: AC Adapter [AC0] (on-line)
[    0.874905] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:19/PNP0C09:01/PNP0C0D:00/input/input0
[    0.874953] ACPI: button: Lid Switch [LID]
[    0.875022] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.875048] ACPI: button: Sleep Button [SLPB]
[    0.875087] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    0.875115] ACPI: button: Power Button [PWRB]
[    0.875158] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.875207] ACPI: button: Power Button [PWRF]
[    0.875443] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1934
[    0.877824] thermal LNXTHERM:00: registered as thermal_zone0
[    0.877829] ACPI: thermal: Thermal Zone [THRM] (43 C)
[    0.878117] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.880670] hpet_acpi_add: no address or irqs in _CRS
[    0.880751] Non-volatile memory driver v1.3
[    0.880794] Linux agpgart interface v0.103
[    0.887721] ACPI: battery: Slot [BAT0] (battery present)
[    0.894055] ACPI: bus type drm_connector registered
[    0.895325] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    0.904465] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[    0.913421] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
[    0.913894] dw-apb-uart.2: ttyS4 at MMIO 0xef234000 (irq = 20, base_baud = 115200) is a 16550A
[    0.916603] intel-lpss 0000:00:1e.2: enabling device (0000 -> 0002)
[    0.917477] ahci 0000:00:17.0: version 3.0
[    0.917784] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x4 impl SATA mode
[    0.917790] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    0.918372] scsi host0: ahci
[    0.918790] scsi host1: ahci
[    0.919242] scsi host2: ahci
[    0.919306] ata1: DUMMY
[    0.919308] ata2: DUMMY
[    0.919316] ata3: SATA max UDMA/133 abar m2048@0xef235000 port 0xef235200 irq 123
[    0.919805] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.919814] ehci-pci: EHCI PCI platform driver
[    0.919835] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.919838] ohci-pci: OHCI PCI platform driver
[    0.919849] uhci_hcd: USB Universal Host Controller Interface driver
[    0.920139] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.920291] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.921409] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[    0.921973] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17
[    0.921979] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.921982] usb usb1: Product: xHCI Host Controller
[    0.921985] usb usb1: Manufacturer: Linux 5.17.5-300.fc36.x86_64 xhci-hcd
[    0.921987] usb usb1: SerialNumber: 0000:00:14.0
[    0.922239] hub 1-0:1.0: USB hub found
[    0.922268] hub 1-0:1.0: 12 ports detected
[    0.923409] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.923514] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.923519] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    0.923584] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.17
[    0.923588] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.923591] usb usb2: Product: xHCI Host Controller
[    0.923593] usb usb2: Manufacturer: Linux 5.17.5-300.fc36.x86_64 xhci-hcd
[    0.923595] usb usb2: SerialNumber: 0000:00:14.0
[    0.923774] hub 2-0:1.0: USB hub found
[    0.923793] hub 2-0:1.0: 6 ports detected
[    0.924127] usb: port power management may be unreliable
[    0.924413] usbcore: registered new interface driver usbserial_generic
[    0.924420] usbserial: USB Serial support registered for generic
[    0.924451] i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1
[    0.924455] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.925305] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.925464] mousedev: PS/2 mouse device common for all mice
[    0.925839] rtc_cmos 00:01: RTC can wake from S4
[    0.926664] rtc_cmos 00:01: registered as rtc0
[    0.926801] rtc_cmos 00:01: setting system clock to 2022-05-07T12:32:56 UTC (1651926776)
[    0.926823] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[    0.927275] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[    0.927310] device-mapper: uevent: version 1.0.3
[    0.927452] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    0.927610] intel_pstate: Intel P-state driver initializing
[    0.928372] intel_pstate: HWP enabled
[    0.928679] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[    0.929615] fbcon: Deferring console take-over
[    0.929620] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[    0.929686] hid: raw HID events driver (C) Jiri Kosina
[    0.929733] usbcore: registered new interface driver usbhid
[    0.929734] usbhid: USB HID core driver
[    0.929825] intel_pmc_core INT33A1:00:  initialized
[    0.930039] drop_monitor: Initializing network drop monitor service
[    0.930126] Initializing XFRM netlink socket
[    0.930260] NET: Registered PF_INET6 protocol family
[    0.936122] Segment Routing with IPv6
[    0.936124] RPL Segment Routing with IPv6
[    0.936134] In-situ OAM (IOAM) with IPv6
[    0.936164] mip6: Mobile IPv6
[    0.936166] NET: Registered PF_PACKET protocol family
[    0.937489] microcode: sig=0x806ea, pf=0x80, revision=0xec
[    0.937721] microcode: Microcode Update Driver: v2.2.
[    0.937728] IPI shorthand broadcast: enabled
[    0.937736] AVX2 version of gcm_enc/dec engaged.
[    0.937856] AES CTR mode by8 optimization enabled
[    0.938350] sched_clock: Marking stable (931605552, 6733318)->(958129122, -19790252)
[    0.938722] registered taskstats version 1
[    0.938877] Loading compiled-in X.509 certificates
[    0.966379] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.973205] Loaded X.509 cert 'Fedora kernel signing key: 37cc69c33ffd5eabb080bcd6ce3b554e33dd7456'
[    0.973599] zswap: loaded using pool lzo/zbud
[    0.973808] page_owner is disabled
[    0.973854] Key type ._fscrypt registered
[    0.973855] Key type .fscrypt registered
[    0.973856] Key type fscrypt-provisioning registered
[    0.974206] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes
[    0.974218] Key type big_key registered
[    0.974387] Key type trusted registered
[    0.977461] Key type encrypted registered
[    0.978790] integrity: Loading X.509 certificate: UEFI:db
[    1.000681] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
[    1.000683] integrity: Loading X.509 certificate: UEFI:db
[    1.000821] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
[    1.000822] integrity: Loading X.509 certificate: UEFI:db
[    1.000837] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    1.000838] integrity: Loading X.509 certificate: UEFI:db
[    1.000851] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    1.000852] integrity: Loading X.509 certificate: UEFI:db
[    1.000997] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[    1.002009] Loading compiled-in module X.509 certificates
[    1.002426] Loaded X.509 cert 'Fedora kernel signing key: 37cc69c33ffd5eabb080bcd6ce3b554e33dd7456'
[    1.002428] ima: Allocated hash algorithm: sha256
[    1.020407] ima: No architecture policies found
[    1.020422] evm: Initialising EVM extended attributes:
[    1.020423] evm: security.selinux
[    1.020424] evm: security.SMACK64 (disabled)
[    1.020424] evm: security.SMACK64EXEC (disabled)
[    1.020425] evm: security.SMACK64TRANSMUTE (disabled)
[    1.020425] evm: security.SMACK64MMAP (disabled)
[    1.020426] evm: security.apparmor (disabled)
[    1.020426] evm: security.ima
[    1.020427] evm: security.capability
[    1.020427] evm: HMAC attrs: 0x1
[    1.051491] alg: No test for 842 (842-scomp)
[    1.051530] alg: No test for 842 (842-generic)
[    1.159744] PM:   Magic number: 6:269:531
[    1.159766] tty ttyS11: hash matches
[    1.159824] acpi LNXPOWER:11: hash matches
[    1.159920] RAS: Correctable Errors collector initialized.
[    1.160957] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[    1.230772] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.232267] ata3.00: ATA-9: SanDisk SD8SN8U256G1002, X4131002, max UDMA/133
[    1.232441] ata3.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.233799] ata3.00: Features: Dev-Sleep
[    1.236902] ata3.00: configured for UDMA/133
[    1.249015] scsi 2:0:0:0: Direct-Access     ATA      SanDisk SD8SN8U2 1002 PQ: 0 ANSI: 5
[    1.249747] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.250366] sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.250448] sd 2:0:0:0: [sda] Write Protect is off
[    1.250455] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.250516] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.263826]  sda: sda1 sda2 sda3 sda4
[    1.274425] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.277235] Freeing unused decrypted memory: 2036K
[    1.278138] Freeing unused kernel image (initmem) memory: 2708K
[    1.278264] Write protecting the kernel read-only data: 30720k
[    1.279357] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    1.279865] Freeing unused kernel image (rodata/data gap) memory: 1112K
[    1.348479] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.348483] rodata_test: all tests were successful
[    1.348484] x86/mm: Checking user space page tables
[    1.363139] usb 1-1: New USB device found, idVendor=0461, idProduct=4dfb, bcdDevice= 2.00
[    1.363143] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.363145] usb 1-1: Product: USB Optical Mouse
[    1.365635] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:0461:4DFB.0001/input/input5
[    1.365843] hid-generic 0003:0461:4DFB.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:14.0-1/input0
[    1.390530] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.390578] Run /init as init process
[    1.390579]   with arguments:
[    1.390580]     /init
[    1.390581]     rhgb
[    1.390582]   with environment:
[    1.390582]     HOME=/
[    1.390583]     TERM=linux
[    1.390583]     BOOT_IMAGE=(hd0,gpt1)/boot/vmlinuz-5.17.5-300.fc36.x86_64
[    1.463312] systemd[1]: systemd v250.3-8.fc36 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    1.470917] tsc: Refined TSC clocksource calibration: 1799.997 MHz
[    1.470923] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f226b2958, max_idle_ns: 440795203083 ns
[    1.471018] clocksource: Switched to clocksource tsc
[    1.475302] systemd[1]: Detected architecture x86-64.
[    1.475305] systemd[1]: Running in initial RAM disk.
[    1.475353] systemd[1]: No hostname configured, using default hostname.
[    1.475422] systemd[1]: Hostname set to <fedora>.
[    1.479986] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[    1.491783] systemd[1]: Failed to open libbpf, LSM BPF is not supported: Operation not supported
[    1.534948] systemd[1]: Queued start job for default target initrd.target.
[    1.535076] systemd[1]: Reached target initrd-usr-fs.target - Initrd /usr File System.
[    1.535130] systemd[1]: Reached target local-fs.target - Local File Systems.
[    1.535146] systemd[1]: Reached target slices.target - Slice Units.
[    1.535160] systemd[1]: Reached target swap.target - Swaps.
[    1.535171] systemd[1]: Reached target timers.target - Timer Units.
[    1.535293] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[    1.535379] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[    1.535458] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[    1.535548] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[    1.535609] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[    1.535621] systemd[1]: Reached target sockets.target - Socket Units.
[    1.536961] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[    1.537011] systemd[1]: memstrack.service - Memstrack Anylazing Service was skipped because all trigger condition checks failed.
[    1.538361] systemd[1]: Starting systemd-journald.service - Journal Service...
[    1.539088] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[    1.539657] systemd[1]: Starting systemd-vconsole-setup.service - Setup Virtual Console...
[    1.540163] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[    1.540842] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[    1.545087] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
[    1.553632] fuse: init (API version 7.36)
[    1.557975] IPMI message handler: version 39.2
[    1.559335] ipmi device interface
[    1.568818] systemd[1]: Started systemd-journald.service - Journal Service.
[    1.568907] audit: type=1130 audit(1651926777.140:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.572133] audit: type=1130 audit(1651926777.144:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.575747] audit: type=1130 audit(1651926777.147:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.577399] audit: type=1130 audit(1651926777.149:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.587008] audit: type=1130 audit(1651926777.159:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.609012] usb 1-5: New USB device found, idVendor=1058, idProduct=07a8, bcdDevice=10.33
[    1.609018] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.609019] usb 1-5: Product: My Passport 07A8
[    1.609020] usb 1-5: Manufacturer: Western Digital
[    1.609021] usb 1-5: SerialNumber: 575834314141323830363530
[    1.617194] audit: type=1130 audit(1651926777.189:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.618015] audit: type=1334 audit(1651926777.190:8): prog-id=6 op=LOAD
[    1.618225] audit: type=1334 audit(1651926777.190:9): prog-id=7 op=LOAD
[    1.618317] audit: type=1334 audit(1651926777.190:10): prog-id=8 op=LOAD
[    1.638148] usb-storage 1-5:1.0: USB Mass Storage device detected
[    1.638268] scsi host3: usb-storage 1-5:1.0
[    1.638341] usbcore: registered new interface driver usb-storage
[    1.640515] usbcore: registered new interface driver uas
[    1.723928] usb 1-6: new high-speed USB device number 4 using xhci_hcd
[    1.804253] input: ELAN1300:00 04F3:3057 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN1300:00/0018:04F3:3057.0002/input/input6
[    1.804363] input: ELAN1300:00 04F3:3057 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN1300:00/0018:04F3:3057.0002/input/input7
[    1.804423] hid-generic 0018:04F3:3057.0002: input,hidraw1: I2C HID v1.00 Mouse [ELAN1300:00 04F3:3057] on i2c-ELAN1300:00
[    1.860356] input: ELAN1300:00 04F3:3057 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN1300:00/0018:04F3:3057.0002/input/input8
[    1.860513] input: ELAN1300:00 04F3:3057 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN1300:00/0018:04F3:3057.0002/input/input9
[    1.860587] hid-multitouch 0018:04F3:3057.0002: input,hidraw1: I2C HID v1.00 Mouse [ELAN1300:00 04F3:3057] on i2c-ELAN1300:00
[    1.875498] usb 1-6: New USB device found, idVendor=13d3, idProduct=56a2, bcdDevice=17.04
[    1.875503] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.875505] usb 1-6: Product: USB2.0 HD UVC WebCam
[    1.875507] usb 1-6: Manufacturer: Azurewave
[    1.875509] usb 1-6: SerialNumber: 0x0001
[    1.911871] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none.
[    1.991967] usb 1-8: new full-speed USB device number 5 using xhci_hcd
[    1.996407] i915 0000:00:02.0: vgaarb: deactivate vga console
[    1.998086] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.999811] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    2.055600] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 1
[    2.057577] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.057863] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[    2.118483] usb 1-8: New USB device found, idVendor=13d3, idProduct=3500, bcdDevice= 0.01
[    2.118487] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.336647] fbcon: i915drmfb (fb0) is primary device
[    2.336649] fbcon: Deferring console take-over
[    2.336650] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    2.407304] systemd-journald[268]: Received SIGTERM from PID 1 (systemd).
[    2.534845] SELinux:  policy capability network_peer_controls=1
[    2.534850] SELinux:  policy capability open_perms=1
[    2.534850] SELinux:  policy capability extended_socket_class=1
[    2.534851] SELinux:  policy capability always_check_network=0
[    2.534852] SELinux:  policy capability cgroup_seclabel=1
[    2.534853] SELinux:  policy capability nnp_nosuid_transition=1
[    2.534853] SELinux:  policy capability genfs_seclabel_symlinks=1
[    2.534854] SELinux:  policy capability ioctl_skip_cloexec=0
[    2.572332] systemd[1]: Successfully loaded SELinux policy in 81.001ms.
[    2.614281] systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 30.753ms.
[    2.621311] systemd[1]: systemd v250.3-8.fc36 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    2.633208] systemd[1]: Detected architecture x86-64.
[    2.686248] scsi 3:0:0:0: Direct-Access     WD       My Passport 07A8 1033 PQ: 0 ANSI: 6
[    2.686437] scsi 3:0:0:1: Enclosure         WD       SES Device       1033 PQ: 0 ANSI: 6
[    2.688119] sd 3:0:0:0: [sdb] 976707584 512-byte logical blocks: (500 GB/466 GiB)
[    2.688370] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    2.688444] sd 3:0:0:0: [sdb] Write Protect is off
[    2.688450] sd 3:0:0:0: [sdb] Mode Sense: 53 00 10 08
[    2.688633] scsi 3:0:0:1: Attached scsi generic sg2 type 13
[    2.688754] sd 3:0:0:0: [sdb] No Caching mode page found
[    2.688760] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[    2.690532]  sdb: sdb1 sdb2 sdb3
[    2.691507] sd 3:0:0:0: [sdb] Attached SCSI disk
[    3.108393] systemd[1]: LSM BPF program attached
[    3.364951] systemd-sysv-generator[470]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    3.365310] systemd-sysv-generator[470]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    3.403024] zram: Added device: zram0
[    3.661269] systemd[1]: initrd-switch-root.service: Deactivated successfully.
[    3.673403] systemd[1]: Stopped initrd-switch-root.service - Switch Root.
[    3.674044] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[    3.674374] systemd[1]: Created slice machine.slice - Virtual Machine and Container Slice.
[    3.674782] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[    3.675088] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[    3.675389] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[    3.675684] systemd[1]: Created slice system-systemd\x2dzram\x2dsetup.slice - Slice /system/systemd-zram-setup.
[    3.675975] systemd[1]: Created slice user.slice - User and Session Slice.
[    3.676019] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of a failed condition check (ConditionPathExists=!/run/plymouth/pid).
[    3.676153] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[    3.676511] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[    3.676569] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[    3.676608] systemd[1]: Reached target getty.target - Login Prompts.
[    3.676642] systemd[1]: Stopped target initrd-switch-root.target - Switch Root.
[    3.676672] systemd[1]: Stopped target initrd-fs.target - Initrd File Systems.
[    3.676698] systemd[1]: Stopped target initrd-root-fs.target - Initrd Root File System.
[    3.676730] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[    3.676800] systemd[1]: Reached target slices.target - Slice Units.
[    3.676844] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[    3.677214] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
[    3.678317] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
[    3.679600] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
[    3.679729] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[    3.680175] systemd[1]: Listening on systemd-oomd.socket - Userspace Out-Of-Memory (OOM) Killer Socket.
[    3.680788] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[    3.681076] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[    3.681339] systemd[1]: Listening on systemd-userdbd.socket - User Database Manager Socket.
[    3.682286] systemd[1]: Activating swap dev-sda4.swap - Swap Partition...
[    3.683377] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[    3.684482] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[    3.685637] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[    3.686903] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[    3.687092] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of a failed condition check (ConditionPathExists=/etc/krb5.keytab).
[    3.687605] Adding 4095996k swap on /dev/sda4.  Priority:-2 extents:1 across:4095996k SSFS
[    3.688419] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[    3.689495] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    3.690585] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[    3.691674] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[    3.692805] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[    3.693985] systemd[1]: Starting nfs-convert.service - Preprocess NFS configuration convertion...
[    3.694092] systemd[1]: plymouth-switch-root.service: Deactivated successfully.
[    3.706165] systemd[1]: Stopped plymouth-switch-root.service - Plymouth switch root service.
[    3.706854] systemd[1]: Stopped systemd-journald.service - Journal Service.
[    3.712933] systemd[1]: Starting systemd-journald.service - Journal Service...
[    3.717883] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[    3.721619] systemd[1]: Starting systemd-network-generator.service - Generate network units from Kernel command line...
[    3.724997] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[    3.725328] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because all trigger condition checks failed.
[    3.728120] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[    3.731477] systemd[1]: Activated swap dev-sda4.swap - Swap Partition.
[    3.734683] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[    3.735031] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[    3.735330] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[    3.735602] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[    3.738473] EXT4-fs (sda1): re-mounted. Quota mode: none.
[    3.747208] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[    3.748892] systemd[1]: Started systemd-journald.service - Journal Service.
[    3.835499] systemd-journald[490]: Received client request to flush runtime journal.
[    4.050364] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input11
[    4.069413] Userspace governor deprecated: use thermal netlink notification instead
[    4.130849] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    4.131262] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    4.131597] idma64 idma64.2: Found Intel integrated DMA 64-bit
[    4.132418] idma64 idma64.3: Found Intel integrated DMA 64-bit
[    4.163528] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[    4.164949] mc: Linux media interface: v0.10
[    4.165234] intel_rapl_common: Found RAPL domain package
[    4.165237] intel_rapl_common: Found RAPL domain dram
[    4.185149] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    4.223575] input: PC Speaker as /devices/platform/pcspkr/input/input12
[    4.224563] videodev: Linux video capture interface: v2.00
[    4.225728] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    4.225770] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    4.228453] i2c i2c-7: 2/2 memory slots populated (from DMI)
[    4.268581] asus_wmi: ASUS WMI generic driver loaded
[    4.287122] asus_wmi: Initialization: 0x1
[    4.287167] asus_wmi: BIOS WMI version: 9.0
[    4.287193] asus_wmi: SFUN value: 0x21
[    4.287195] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
[    4.287198] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
[    4.287877] Bluetooth: Core ver 2.22
[    4.287896] NET: Registered PF_BLUETOOTH protocol family
[    4.287897] Bluetooth: HCI device and connection manager initialized
[    4.287901] Bluetooth: HCI socket layer initialized
[    4.287904] Bluetooth: L2CAP socket layer initialized
[    4.287923] Bluetooth: SCO socket layer initialized
[    4.288569] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input13
[    4.288843] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    4.291890] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.297805] ACPI: battery: new extension: ASUS Battery Extension
[    4.317989] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    4.317993] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    4.317994] RAPL PMU: hw unit of domain package 2^-14 Joules
[    4.317995] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    4.317996] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    4.317997] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    4.325189] zram0: detected capacity change from 0 to 15982592
[    4.422829] usbcore: registered new interface driver btusb
[    4.431708] Adding 7991292k swap on /dev/zram0.  Priority:100 extents:1 across:7991292k SSDscFS
[    4.464044] intel_rapl_common: Found RAPL domain package
[    4.464048] intel_rapl_common: Found RAPL domain core
[    4.464049] intel_rapl_common: Found RAPL domain uncore
[    4.464050] intel_rapl_common: Found RAPL domain dram
[    4.464051] intel_rapl_common: Found RAPL domain psys
[    4.469996] usb 1-6: Found UVC 1.00 device USB2.0 HD UVC WebCam (13d3:56a2)
[    4.477803] input: USB2.0 HD UVC WebCam: USB2.0 HD as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input14
[    4.477876] usbcore: registered new interface driver uvcvideo
[    4.500880] iTCO_vendor_support: vendor-support=0
[    4.507121] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[    4.510213] ------------[ cut here ]------------
[    4.510215] WARNING: CPU: 1 PID: 592 at drivers/spi/spidev.c:731 spidev_probe+0x1fc/0x210 [spidev]
[    4.510222] Modules linked in: mei_pxp(+) mei_hdcp intel_pmc_bxt spidev iTCO_vendor_support pcc_cpufreq(-) ath10k_core kvm_intel(+) snd_hda_core intel_rapl_msr snd_hwdep kvm uvcvideo mac80211 btusb btrtl btbcm snd_seq btintel irqbypass rapl libarc4 ath snd_seq_device videobuf2_vmalloc intel_cstate btmtk videobuf2_memops snd_pcm videobuf2_v4l2 asus_nb_wmi intel_uncore bluetooth cfg80211 asus_wmi snd_timer videobuf2_common snd spi_pxa2xx_platform sparse_keymap i2c_i801 pcspkr ses(+) videodev platform_profile wmi_bmof soundcore i2c_smbus dw_dmac enclosure mei_me ecdh_generic processor_thermal_device_pci_legacy mc processor_thermal_device joydev rfkill scsi_transport_sas processor_thermal_rfim mei idma64 processor_thermal_mbox processor_thermal_rapl intel_rapl_common intel_xhci_usb_role_switch intel_soc_dts_iosf intel_pch_thermal int3403_thermal int340x_thermal_zone int3400_thermal acpi_pad acpi_thermal_rel asus_wireless zram i915 crct10dif_pclmul crc32_pclmul hid_multitouch crc32c_intel
[    4.510278]  ghash_clmulni_intel serio_raw ttm wmi i2c_hid_acpi i2c_hid video pinctrl_sunrisepoint uas usb_storage ip6_tables ip_tables ipmi_devintf ipmi_msghandler fuse
[    4.510291] CPU: 1 PID: 592 Comm: sh Not tainted 5.17.5-300.fc36.x86_64 #1
[    4.510293] Hardware name: ASUSTeK COMPUTER INC. X406UAR/X406UAR, BIOS X406UAR.312 06/04/2019
[    4.510295] RIP: 0010:spidev_probe+0x1fc/0x210 [spidev]
[    4.510299] Code: fe ff ff e9 3f 0c 00 00 41 89 c6 85 c0 0f 84 6a ff ff ff 48 c7 c7 c0 20 79 c0 e8 0f 7e 58 e4 8b 85 f8 02 00 00 e9 c3 fe ff ff <0f> 0b e9 21 fe ff ff 41 be f4 ff ff ff e9 bc fe ff ff 66 90 0f 1f
[    4.510301] RSP: 0018:ffffb437803a7d40 EFLAGS: 00010246
[    4.510303] RAX: 0000000000000000 RBX: ffff9edb477c0800 RCX: ffffb437803a7d28
[    4.510305] RDX: 0000000000000050 RSI: ffff9edb4153f450 RDI: ffffffffa5690262
[    4.510307] RBP: ffff9edb477c0800 R08: ffff9edb42fb8310 R09: ffffb437803a7b38
[    4.510308] R10: ffff9edb43140000 R11: 0000000000000000 R12: 0000000000000000
[    4.510310] R13: ffffffffa60c9ea0 R14: ffffb437803a7e98 R15: ffff9edb48856020
[    4.510311] FS:  00007ff097c8a740(0000) GS:ffff9edc96c40000(0000) knlGS:0000000000000000
[    4.510314] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    4.510316] CR2: 0000555e0cb85000 CR3: 0000000102038005 CR4: 00000000003706e0
[    4.510318] Call Trace:
[    4.510320]  <TASK>
[    4.510323]  spi_probe+0x54/0x80
[    4.510329]  really_probe+0x1f3/0x3c0
[    4.510333]  __driver_probe_device+0xfc/0x170
[    4.510335]  device_driver_attach+0x41/0xa0
[    4.510338]  bind_store+0xaf/0x100
[    4.510340]  kernfs_fop_write_iter+0x11b/0x1f0
[    4.510345]  new_sync_write+0x102/0x180
[    4.510348]  ? intel_pmu_drain_pebs_nhm+0x4f0/0x5e0
[    4.510352]  vfs_write+0x209/0x2a0
[    4.510356]  ksys_write+0x53/0xd0
[    4.510359]  do_syscall_64+0x3a/0x80
[    4.510362]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[    4.510366] RIP: 0033:0x7ff097d92707
[    4.510378] Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
[    4.510380] RSP: 002b:00007ffd449512f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[    4.510382] RAX: ffffffffffffffda RBX: 0000000000000010 RCX: 00007ff097d92707
[    4.510384] RDX: 0000000000000010 RSI: 000055a6f908c7a0 RDI: 0000000000000001
[    4.510385] RBP: 000055a6f908c7a0 R08: 0000000000000001 R09: 0000000000000073
[    4.510387] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000010
[    4.510388] R13: 00007ff097e845a0 R14: 0000000000000010 R15: 00007ff097e84780
[    4.510391]  </TASK>
[    4.510392] ---[ end trace 0000000000000000 ]---
[    4.531309] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    4.531430] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    4.534255] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002)
[    4.535732] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[    4.561356] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    4.561648] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    4.562438] intel_tcc_cooling: Programmable TCC Offset detected
[    4.604393] scsi 3:0:0:1: Wrong diagnostic page; asked for 1 got 8
[    4.604397] scsi 3:0:0:1: Failed to get diagnostic page 0x1
[    4.604398] scsi 3:0:0:1: Failed to bind enclosure -19
[    4.604423] ses 3:0:0:1: Attached Enclosure device
[    4.622455] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC295: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    4.622460] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.622461] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    4.622463] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    4.622464] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    4.622465] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x12
[    4.636976] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0
[    4.636991] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    4.636993] pcieport 0000:00:1c.0:   device [8086:9d15] error status/mask=00000001/00002000
[    4.636996] pcieport 0000:00:1c.0:    [ 0] RxErr                 
[    4.637002] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0
[    4.637009] pcieport 0000:00:1c.0: AER: can't find device of ID00e0
[    4.637010] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0
[    4.637017] pcieport 0000:00:1c.0: AER: can't find device of ID00e0
[    4.637018] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0
[    4.637024] pcieport 0000:00:1c.0: AER: can't find device of ID00e0
[    4.666790] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0
[    4.666801] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    4.666803] pcieport 0000:00:1c.0:   device [8086:9d15] error status/mask=00000001/00002000
[    4.666805] pcieport 0000:00:1c.0:    [ 0] RxErr                 
[    4.830020] ath10k_pci 0000:01:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 1a3b:2251
[    4.830025] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[    4.830480] ath10k_pci 0000:01:00.0: firmware ver WLAN.TF.2.1-00021-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 42e41877
[    4.902589] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a
[    4.997701] ath10k_pci 0000:01:00.0: htt-ver 3.56 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[    5.066935] ath: EEPROM regdomain: 0x6a
[    5.066939] ath: EEPROM indicates we should expect a direct regpair map
[    5.066940] ath: Country alpha2 being used: 00
[    5.066941] ath: Regpair used: 0x6a
[    5.083889] ath10k_pci 0000:01:00.0 wlp1s0: renamed from wlan0
[    5.264766] kauditd_printk_skb: 126 callbacks suppressed
[    5.264773] audit: type=1130 audit(1651926780.836:135): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.322216] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    5.322359] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    5.322463] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    5.322558] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[    5.322644] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[    5.322723] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[    5.351386] audit: type=1130 audit(1651926780.923:136): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-8A92\x2dC95D comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.359330] audit: type=1130 audit(1651926780.931:137): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-5c9ab578\x2d8399\x2d417f\x2d8e48\x2d8c0dd0b902e2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.371841] EXT4-fs (sda3): mounted filesystem with ordered data mode. Quota mode: none.
[    5.399333] audit: type=1130 audit(1651926780.971:138): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.406630] audit: type=1130 audit(1651926780.979:139): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.424198] audit: type=1130 audit(1651926780.996:140): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-boot-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.461555] audit: type=1130 audit(1651926781.034:141): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.466518] audit: type=1334 audit(1651926781.038:142): prog-id=43 op=LOAD
[    5.466608] audit: type=1334 audit(1651926781.038:143): prog-id=44 op=LOAD
[    5.466685] audit: type=1334 audit(1651926781.038:144): prog-id=45 op=LOAD
[    5.520336] RPC: Registered named UNIX socket transport module.
[    5.520339] RPC: Registered udp transport module.
[    5.520339] RPC: Registered tcp transport module.
[    5.520340] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    5.704274] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.704278] Bluetooth: BNEP filters: protocol multicast
[    5.704282] Bluetooth: BNEP socket layer initialized
[    5.919983] NET: Registered PF_QIPCRTR protocol family
[    6.655420] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0
[    6.655446] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    6.655451] pcieport 0000:00:1c.0:   device [8086:9d15] error status/mask=00000001/00002000
[    6.655458] pcieport 0000:00:1c.0:    [ 0] RxErr                 
[    6.655471] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0
[    6.655484] pcieport 0000:00:1c.0: AER: can't find device of ID00e0
[    6.687896] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0
[    6.687951] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    6.687957] pcieport 0000:00:1c.0:   device [8086:9d15] error status/mask=00000001/00002000
[    6.687964] pcieport 0000:00:1c.0:    [ 0] RxErr                 
[    6.687977] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0
[    6.687990] pcieport 0000:00:1c.0: AER: can't find device of ID00e0
[    6.963377] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0
[    6.963401] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    6.963406] pcieport 0000:00:1c.0:   device [8086:9d15] error status/mask=00002001/00002000
[    6.963412] pcieport 0000:00:1c.0:    [ 0] RxErr                 
[    6.963424] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0
[    6.963435] pcieport 0000:00:1c.0: AER: can't find device of ID00e0
[    6.963439] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0
[    6.963449] pcieport 0000:00:1c.0: AER: can't find device of ID00e0
[    6.994956] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0
[    6.994978] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[    6.994983] pcieport 0000:00:1c.0:   device [8086:9d15] error status/mask=00000001/00002000
[    6.994989] pcieport 0000:00:1c.0:    [ 0] RxErr                 
[   11.940120] wlp1s0: authenticate with a4:3e:51:86:ec:eb
[   11.972412] wlp1s0: send auth to a4:3e:51:86:ec:eb (try 1/3)
[   11.973805] wlp1s0: authenticated
[   11.975980] wlp1s0: associate with a4:3e:51:86:ec:eb (try 1/3)
[   11.979763] wlp1s0: RX AssocResp from a4:3e:51:86:ec:eb (capab=0x1511 status=0 aid=16)
[   11.982867] wlp1s0: associated
[   11.983083] ath: EEPROM regdomain: 0x80fa
[   11.983089] ath: EEPROM indicates we should expect a country code
[   11.983092] ath: doing EEPROM country->regdmn map search
[   11.983095] ath: country maps to regdmn code: 0x37
[   11.983098] ath: Country alpha2 being used: FR
[   11.983102] ath: Regpair used: 0x37
[   11.983105] ath: regdomain 0x80fa dynamically updated by country element
[   12.076002] wlp1s0: Limiting TX power to 26 (26 - 0) dBm as advertised by a4:3e:51:86:ec:eb
[   12.126377] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[   17.689057] rfkill: input handler disabled
[   18.000400] Bluetooth: RFCOMM TTY layer initialized
[   18.000421] Bluetooth: RFCOMM socket layer initialized
[   18.000585] Bluetooth: RFCOMM ver 1.11
[   31.129384] rfkill: input handler enabled
[   35.602894] ISO 9660 Extensions: Microsoft Joliet Level 3
[   35.604280] ISO 9660 Extensions: Microsoft Joliet Level 3
[   35.605020] ISO 9660 Extensions: RRIP_1991A
[   35.827422] rfkill: input handler disabled
jeanluc@asus:~$ sensors
bash: sensors : commande introuvable
pour la commande sensors, il te faut installer "lm-sensors".
winmandrake wrote:pour la commande sensors, il te faut installer "lm-sensors".
jeanluc@asus:~$ sudo dnf install lm-sensors
[sudo] Mot de passe de jeanluc : 
Dernière vérification de l’expiration des métadonnées effectuée il y a 0:39:37 le sam. 07 mai 2022 09:02:47.
Aucune correspondance pour le paramètre: lm-sensors
Erreur : Impossible de trouver une correspondance: lm-sensors
RPM Fusion est installé

Dans "Logiciels" j'ai trouvé XSensors, que j'ai installé, apparemment ça mesure la température.
Bonjour, ce n'est pas lm-sensors mais lm_sensors

Non je me trompe c'est sensors-detect
chepioq wrote:Bonjour, ce n'est pas lm-sensors mais lm_sensors

Non je me trompe c'est sensors-detect
C'est bien lm_sensors
jeanluc@asus:~$ sensors
asus-isa-0000
Adapter: ISA adapter
cpu_fan:        0 RPM

BAT0-acpi-0
Adapter: ACPI interface
in0:           7.70 V  

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +35.0°C  (high = +100.0°C, crit = +100.0°C)
Core 0:        +34.0°C  (high = +100.0°C, crit = +100.0°C)
Core 1:        +34.0°C  (high = +100.0°C, crit = +100.0°C)
Core 2:        +34.0°C  (high = +100.0°C, crit = +100.0°C)
Core 3:        +34.0°C  (high = +100.0°C, crit = +100.0°C)

pch_skylake-virtual-0
Adapter: Virtual device
temp1:        +30.5°C  
Ce ne chauffe pas ça je le savais. Gnome vient de passer en 42.1, il y a eu une grosse MaJ, ça a l'air d'aller mieux.
Je n'ai pas décortiqué le reste mais la vitesse de ton ventilateur de CPU est vu à 0 RPM.

Tu as bien lancé la commande sensors-detect ?
asus c'est pas le pied pour les retours des sondes....
Du coup je te conseil de régler ta ventilation dans le bios directement.

Sinon tu peux tenter avec :
sudo pwmconfig
Pour générer une configuration "fancontrol".
Si tu changes le niveau de performance de ta machine via Gnome en passant par Paramètres->Énergie->Mode d'énergie, est-ce que tu constate un changement au bout d'un moment ?

Tu as 2 cartes graphiques pour info, que retourne
$ lspci -nnk | grep -iA3 "VGA"
Nicosss wrote:Si tu changes le niveau de performance de ta machine via Gnome en passant par Paramètres->Énergie->Mode d'énergie, est-ce que tu constate un changement au bout d'un moment ?

Tu as 2 cartes graphiques pour info, que retourne
$ lspci -nnk | grep -iA3 "VGA"
Je l'ai passé en mode "économie d’énergie" maintenant présent dans Gnome, le ventilo se déclenche moins maintenant.
Donc ça a une influence, c'est déjà une bonne information.

Par contre tu n'as pas donné le retour de la commande ni répondu à la précédente question.
11 jours plus tard
Nicosss wrote:Donc ça a une influence, c'est déjà une bonne information.

Par contre tu n'as pas donné le retour de la commande ni répondu à la précédente question.
Désolé de la réponse tardive, j'étais un peu au four et au moulin
jeanluc@jeanluc:~$ lspci -nnk | grep -iA3 "VGA"
00:02.0 VGA compatible controller [0300]: Intel Corporation UHD Graphics 620 [8086:5917] (rev 07)
	Subsystem: ASUSTeK Computer Inc. Device [1043:1ac0]
	Kernel driver in use: i915
	Kernel modules: i915
jeanluc@jeanluc:~$ 
Nicosss wrote:Je n'ai pas décortiqué le reste mais la vitesse de ton ventilateur de CPU est vu à 0 RPM.

Tu as bien lancé la commande sensors-detect ?
Voilà ce que ça donne
jeanluc@jeanluc:~$ sudo sensors-detect
[sudo] Mot de passe de jeanluc : 
# sensors-detect version 3.6.0
# System: ASUSTeK COMPUTER INC. X406UAR [1.0] (laptop)
# Kernel: 5.17.7-300.fc36.x86_64 x86_64
# Processor: Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz (6/142/10)

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): ^C
jeanluc@jeanluc:~$ ^C
jeanluc@jeanluc:~$ y
bash: y : commande introuvable
jeanluc@jeanluc:~$ sudo sensors-detect
# sensors-detect version 3.6.0
# System: ASUSTeK COMPUTER INC. X406UAR [1.0] (laptop)
# Kernel: 5.17.7-300.fc36.x86_64 x86_64
# Processor: Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz (6/142/10)

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): y
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD Family 10h thermal sensors...                           No
AMD Family 11h thermal sensors...                           No
AMD Family 12h and 14h thermal sensors...                   No
AMD Family 15h thermal sensors...                           No
AMD Family 16h thermal sensors...                           No
AMD Family 17h thermal sensors...                           No
AMD Family 19h thermal sensors...                           No
AMD Family 15h power sensors...                             No
AMD Family 16h power sensors...                             No
Hygon Family 18h thermal sensors...                         No
Intel digital thermal sensor...                             Success!
    (driver `coretemp')
Intel AMB FB-DIMM thermal sensor...                         No
Intel 5500/5520/X58 thermal sensor...                       No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y
Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): y
Using driver `i2c-i801' for device 0000:00:1f.4: Sunrise Point-LP (PCH)
Module i2c-dev loaded successfully.

Next adapter: Synopsys DesignWare I2C adapter (i2c-0)
Do you want to scan it? (YES/no/selectively): y
Adapter doesn't support all probing functions.
Some addresses won't be probed.

Next adapter: Synopsys DesignWare I2C adapter (i2c-1)
Do you want to scan it? (YES/no/selectively): y
Adapter doesn't support all probing functions.
Some addresses won't be probed.

Next adapter: i915 gmbus dpc (i2c-2)
Do you want to scan it? (yes/NO/selectively): y

Next adapter: i915 gmbus dpb (i2c-3)
Do you want to scan it? (yes/NO/selectively): y

Next adapter: i915 gmbus dpd (i2c-4)
Do you want to scan it? (yes/NO/selectively): y

Next adapter: AUX A/DDI A/PHY A (i2c-5)
Do you want to scan it? (yes/NO/selectively): y

Next adapter: AUX B/DDI B/PHY B (i2c-6)
Do you want to scan it? (yes/NO/selectively): y

Next adapter: SMBus I801 adapter at f040 (i2c-7)
Do you want to scan it? (YES/no/selectively): y


Now follows a summary of the probes I have just done.
Just press ENTER to continue: 

Driver `coretemp':
  * Chip `Intel digital thermal sensor' (confidence: 9)

Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no): y
Unloading i2c-dev... OK
Et du coup le retour de
$ sensors