Merci pour votre aide.
Voici le retour des commandes :
[jared@fedora-optiplex ~]$ sudo fdisk -l /dev/sda
Disque /dev/sda : 111,8 GiB, 120034123776 octets, 234441648 secteurs
Modèle de disque : INTEL SSDSC2BW12
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0x546bced5
Périphérique Amorçage Début Fin Secteurs Taille Id Type
/dev/sda1 * 2048 976895 974848 476M 83 Linux
/dev/sda2 978942 234440703 233461762 111,3G 5 Étendue
/dev/sda5 978944 59570175 58591232 28G 83 Linux
/dev/sda6 59572224 75194367 15622144 7,5G 82 partition d'échange
/dev/sda7 75196416 234440703 159244288 76G 83 Linux
[jared@fedora-optiplex ~]$ sudo smartctl -a /dev/sda5
smartctl 7.0 2019-03-31 r4903 [x86_64-linux-5.0.17-300.fc30.x86_64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Intel 53x and Pro 2500 Series SSDs
Device Model: INTEL SSDSC2BW120A4
Serial Number: PHDA418600A91207GN
LU WWN Device Id: 5 5cd2e4 0003b19f8
Firmware Version: DC32
User Capacity: 120034123776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Jul 27 16:58:59 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x05) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 33) The self-test routine was interrupted
by the host with a hard or soft reset.
Total time to complete Offline
data collection: ( 2930) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0025) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0
9 Power_On_Hours_and_Msec 0x0032 100 100 000 Old_age Always - 3107h+11m+47.760s
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3649
170 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0
171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0
172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0
174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 210
183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always - 215
184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0
187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0032 030 052 000 Old_age Always - 30 (Min/Max 15/52)
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 210
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 142521
226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 65535
227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 72
228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 65535
232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0
233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0
241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 142521
242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 399490
249 NAND_Writes_1GiB 0x0032 100 100 000 Old_age Always - 10739
SMART Error Log not supported
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Offline Interrupted (host reset) 10% 3105 -
# 2 Offline Interrupted (host reset) 10% 3101 -
# 3 Offline Interrupted (host reset) 10% 3099 -
# 4 Offline Interrupted (host reset) 10% 3099 -
# 5 Offline Interrupted (host reset) 10% 3098 -
# 6 Offline Interrupted (host reset) 10% 3098 -
# 7 Offline Interrupted (host reset) 10% 3096 -
# 8 Offline Interrupted (host reset) 10% 3096 -
# 9 Offline Interrupted (host reset) 10% 3092 -
#10 Offline Interrupted (host reset) 10% 3092 -
#11 Offline Interrupted (host reset) 10% 3092 -
#12 Offline Interrupted (host reset) 10% 3090 -
#13 Offline Interrupted (host reset) 10% 3090 -
#14 Offline Interrupted (host reset) 10% 3089 -
#15 Offline Interrupted (host reset) 10% 3086 -
#16 Offline Interrupted (host reset) 10% 3086 -
#17 Offline Interrupted (host reset) 10% 3086 -
#18 Offline Interrupted (host reset) 10% 3077 -
#19 Offline Interrupted (host reset) 10% 3077 -
#20 Offline Interrupted (host reset) 10% 3076 -
#21 Offline Interrupted (host reset) 10% 3076 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
[jared@fedora-optiplex ~]$ sudo smartctl -a /dev/sda7
smartctl 7.0 2019-03-31 r4903 [x86_64-linux-5.0.17-300.fc30.x86_64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Intel 53x and Pro 2500 Series SSDs
Device Model: INTEL SSDSC2BW120A4
Serial Number: PHDA418600A91207GN
LU WWN Device Id: 5 5cd2e4 0003b19f8
Firmware Version: DC32
User Capacity: 120034123776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Jul 27 17:00:39 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x05) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 33) The self-test routine was interrupted
by the host with a hard or soft reset.
Total time to complete Offline
data collection: ( 2930) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0025) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0
9 Power_On_Hours_and_Msec 0x0032 100 100 000 Old_age Always - 3107h+12m+46.570s
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3649
170 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0
171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0
172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0
174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 210
183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always - 215
184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0
187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0032 030 052 000 Old_age Always - 30 (Min/Max 15/52)
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 210
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 142522
226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 65535
227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 72
228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 65535
232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0
233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0
241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 142522
242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 399490
249 NAND_Writes_1GiB 0x0032 100 100 000 Old_age Always - 10739
SMART Error Log not supported
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Offline Interrupted (host reset) 10% 3105 -
# 2 Offline Interrupted (host reset) 10% 3101 -
# 3 Offline Interrupted (host reset) 10% 3099 -
# 4 Offline Interrupted (host reset) 10% 3099 -
# 5 Offline Interrupted (host reset) 10% 3098 -
# 6 Offline Interrupted (host reset) 10% 3098 -
# 7 Offline Interrupted (host reset) 10% 3096 -
# 8 Offline Interrupted (host reset) 10% 3096 -
# 9 Offline Interrupted (host reset) 10% 3092 -
#10 Offline Interrupted (host reset) 10% 3092 -
#11 Offline Interrupted (host reset) 10% 3092 -
#12 Offline Interrupted (host reset) 10% 3090 -
#13 Offline Interrupted (host reset) 10% 3090 -
#14 Offline Interrupted (host reset) 10% 3089 -
#15 Offline Interrupted (host reset) 10% 3086 -
#16 Offline Interrupted (host reset) 10% 3086 -
#17 Offline Interrupted (host reset) 10% 3086 -
#18 Offline Interrupted (host reset) 10% 3077 -
#19 Offline Interrupted (host reset) 10% 3077 -
#20 Offline Interrupted (host reset) 10% 3076 -
#21 Offline Interrupted (host reset) 10% 3076 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.