Bonjour,
lors de l'ouverture de ma session graphique d'utilisateur, mon pc plante sur l'écran grisé que l'on voit normalement glisser pour laisse place à l'environnement de bureau. Je peux tout même l'ouvrir en passant par un mode console et en lançant
startx, et tout fonctionne sans problème. J'ai remarqué au lancement de la commande qu'il me donne un retour disant qu'il ne trouve pas un fichier, mais je n'ai pas le temps de le lire, peut-on le récupérer pour savoir de quoi il s'agit ?
J'ai noté dans
Xorg.1.log qu'un conflit avec le driver (propriétaire NVIDIA) de la carte graphique était relevé, mais comme ce n'est pas la première erreur déclarée, je ne sais si c'est la cause du problème.
[ 93.650864] NVRM: The NVIDIA probe routine was not called for 1 device(s).
[ 93.650865] NVRM: This can occur when a driver such as:
NVRM: nouveau, rivafb, nvidiafb or rivatv
NVRM: was loaded and obtained ownership of the NVIDIA device(s).
[ 93.650865] NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
Dans le doute, j'ai testé en bootant depuis les autres kernels (5.1.11 et 5.1.12, le plus récent que j'ai étant 5.1.15), sans plus de succès. J'ai fait un
reinstall de akmods, sait-on jamais.
J'ai checké le contenu de /home/username/.local/share/xorg/Xorg.1.log, et effectivement, j'ai pas mal d'erreurs, mais je ne sais pas quoi en faire :
[ 90.606] (II) LoadModule: "fbdev"
[ 90.607] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 90.607] (II) Module fbdev: vendor="X.Org Foundation"
[ 90.607] compiled for 1.20.3, module version = 0.5.0
[ 90.607] Module class: X.Org Video Driver
[ 90.607] ABI class: X.Org Video Driver, version 24.0
[ 90.607] (II) LoadModule: "vesa"
[ 90.607] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 90.607] (II) Module vesa: vendor="X.Org Foundation"
[ 90.607] compiled for 1.20.4, module version = 2.4.0
[ 90.607] Module class: X.Org Video Driver
[ 90.607] ABI class: X.Org Video Driver, version 24.0
[ 90.607] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 90.607] (II) FBDEV: driver for framebuffer: fbdev
[ 90.607] (II) VESA: driver for VESA chipsets: vesa
[ 90.607] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 90.607] (II) modeset(0): using drv /dev/dri/card0
[ 90.607] (WW) Falling back to old probe method for fbdev
[ 90.607] (II) Loading sub module "fbdevhw"
[ 90.607] (II) LoadModule: "fbdevhw"
[ 90.607] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 90.607] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 90.607] compiled for 1.20.4, module version = 0.0.2
[ 90.607] ABI class: X.Org Video Driver, version 24.0
[ 90.607] (EE) open /dev/fb0: Permission denied
[ 90.607] (II) modeset(G0): using drv /dev/dri/card1
[ 90.536] (==) Automatically adding GPU devices
[ 90.536] (==) Automatically binding GPU devices
[ 90.536] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 90.536] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 90.536] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 90.537] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 90.537] (II) Loader magic: 0x562914b69e00
[ 90.537] (II) Module ABI versions:
[ 90.537] X.Org ANSI C Emulation: 0.4
[ 90.537] X.Org Video Driver: 24.0
[ 90.537] X.Org XInput driver : 24.1
[ 90.537] X.Org Server Extension : 10.0
[ 90.537] (++) using VT number 2
[ 90.539] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_32
[ 90.539] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 90.542] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 15 paused 0
[ 90.542] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 90.543] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 16 paused 0
[ 90.546] (--) PCI:*(0@0:2:0) 8086:3e9b:1028:087c rev 0, Mem @ 0xeb000000/16777216, 0x80000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/65536
[ 90.546] (--) PCI: (1@0:0:0) 10de:1c8c:1028:087c rev 161, Mem @ 0xec000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/65536
[ 90.546] (II) LoadModule: "glx"
[ 90.546] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 90.547] (II) Module glx: vendor="X.Org Foundation"
[ 90.547] compiled for 1.20.4, module version = 1.0.0
[ 90.547] ABI class: X.Org Server Extension, version 10.0
[ 90.606] (==) Matched modesetting as autoconfigured driver 0
[ 90.606] (==) Matched fbdev as autoconfigured driver 1
[ 90.606] (==) Matched vesa as autoconfigured driver 2
[ 90.606] (==) Assigned the driver to the xf86ConfigLayout
[ 90.606] (II) LoadModule: "modesetting"
[ 90.606] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 90.606] (II) Module modesetting: vendor="X.Org Foundation"
[ 90.606] compiled for 1.20.4, module version = 1.20.4
[ 90.606] Module class: X.Org Video Driver
[ 90.606] ABI class: X.Org Video Driver, version 24.0
[ 90.535] _XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
[ 90.535] _XSERVTransMakeAllCOTSServerListeners: server already running
[ 90.535] (--) Log file renamed from "/home/r4ph3rd/.local/share/xorg/Xorg.pid-1931.log" to "/home/r4ph3rd/.local/share/xorg/Xorg.1.log"
[ 90.536]
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[ 90.536] Build Operating System: 4.20.13-200.fc29.x86_64
[ 90.536] Current Operating System: Linux r4ph3rd 5.1.12-300.fc30.x86_64 #1 SMP Wed Jun 19 15:19:49 UTC 2019 x86_64
[ 90.536] Kernel command line: BOOT_IMAGE=(hd0,gpt7)/vmlinuz-5.1.12-300.fc30.x86_64 root=/dev/mapper/fedora-root ro resume=/dev/mapper/fedora-swap rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet
[ 90.536] Build Date: 29 March 2019 05:04:12AM
[ 90.536] Build ID: xorg-x11-server 1.20.4-3.fc30
[ 90.536] Current version of pixman: 0.38.0
[ 90.536] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 90.536] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 90.536] (==) Log file: "/home/r4ph3rd/.local/share/xorg/Xorg.1.log", Time: Tue Jul 2 07:58:18 2019
[ 90.536] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 90.536] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 90.536] (==) No Layout section. Using the first Screen section.
[ 90.536] (==) No screen section available. Using defaults.
[ 90.536] (**) |-->Screen "Default Screen Section" (0)
[ 90.536] (**) | |-->Monitor "<default monitor>"
[ 90.536] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 90.607] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 90.607] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 90.607] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 90.607] (==) modeset(0): RGB weight 888
[ 90.607] (==) modeset(0): Default visual is TrueColor
[ 90.607] (II) Loading sub module "glamoregl"
[ 90.607] (II) LoadModule: "glamoregl"
[ 90.607] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[ 90.610] (II) Module glamoregl: vendor="X.Org Foundation"
[ 90.610] compiled for 1.20.4, module version = 1.0.1
[ 90.610] ABI class: X.Org ANSI C Emulation, version 0.4
[ 90.707] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) UHD Graphics 630 (Coffeelake 3x8 GT2)
[ 90.707] (II) modeset(0): glamor initialized
[ 90.708] (II) modeset(0): Output eDP-1 has no monitor section
[ 90.708] (II) modeset(0): Output DP-1 has no monitor section
[ 90.708] (II) modeset(0): Output DP-2 has no monitor section
[ 90.711] (II) modeset(0): Output DP-3 has no monitor section
[ 90.713] (II) modeset(0): EDID for output eDP-1
[ 90.713] (II) modeset(0): Manufacturer: SHP Model: 148d Serial#: 0
[ 90.713] (II) modeset(0): Year: 2018 Week: 5
[ 90.713] (II) modeset(0): EDID Version: 1.4
[ 90.713] (II) modeset(0): Digital Display Input
[ 90.713] (II) modeset(0): 8 bits per channel
[ 90.713] (II) modeset(0): Digital interface is DisplayPort
[ 90.713] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 90.713] (II) modeset(0): Gamma: 2.20
[ 90.713] (II) modeset(0): No DPMS capabilities specified
[ 90.713] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 90.713] (II) modeset(0): Default color space is primary color space
[ 90.713] (II) modeset(0): First detailed timing is preferred mode
[ 90.713] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 90.713] (II) modeset(0): redX: 0.662 redY: 0.325 greenX: 0.210 greenY: 0.732
[ 90.713] (II) modeset(0): blueX: 0.144 blueY: 0.045 whiteX: 0.308 whiteY: 0.314
[ 90.713] (II) modeset(0): Manufacturer's mask: 0
[ 90.713] (II) modeset(0): Supported detailed timing:
[ 90.713] (II) modeset(0): clock: 533.2 MHz Image Size: 344 x 194 mm
[ 90.713] (II) modeset(0): h_active: 3840 h_sync: 3888 h_sync_end 3920 h_blank_end 4000 h_border: 0
[ 90.713] (II) modeset(0): v_active: 2160 v_sync: 2163 v_sync_end 2168 v_blanking: 2222 v_border: 0
[ 90.713] (II) modeset(0): FNVDR<80>LQ156D1
[ 90.713] (II) modeset(0): Unknown vendor-specific block 0
[ 90.713] (II) modeset(0): EDID (in hex):
[ 90.713] (II) modeset(0): 00ffffffffffff004d108d1400000000
[ 90.713] (II) modeset(0): 051c0104a52213780e9eeea95335bb24
[ 90.713] (II) modeset(0): 0b4e5000000001010101010101010101
[ 90.713] (II) modeset(0): 0101010101014dd000a0f0703e803020
[ 90.713] (II) modeset(0): 350058c2100000180000000000000000
[ 90.713] (II) modeset(0): 00000000000000000000000000fe0046
[ 90.713] (II) modeset(0): 4e564452804c51313536443100000000
[ 90.713] (II) modeset(0): 0002410328011200000b010a20200008
[ 90.713] (II) modeset(0): Printing probed modes for output eDP-1
[ 90.713] (II) modeset(0): Modeline "3840x2160"x60.0 533.25 3840 3888 3920 4000 2160 2163 2168 2222 -hsync -vsync (133.3 kHz eP)
[ 90.713] (II) modeset(0): Modeline "3840x2160"x60.0 712.75 3840 4160 4576 5312 2160 2163 2168 2237 -hsync +vsync (134.2 kHz d)
[ 90.713] (II) modeset(0): Modeline "3840x2160"x60.0 533.00 3840 3888 3920 4000 2160 2163 2168 2222 +hsync -vsync (133.2 kHz d)
[ 90.713] (II) modeset(0): Modeline "3200x1800"x60.0 492.00 3200 3456 3800 4400 1800 1803 1808 1865 -hsync +vsync (111.8 kHz d)
[ 90.713] (II) modeset(0): Modeline "3200x1800"x59.9 373.00 3200 3248 3280 3360 1800 1803 1808 1852 +hsync -vsync (111.0 kHz d)
[ 90.713] (II) modeset(0): Modeline "2880x1620"x60.0 396.25 2880 3096 3408 3936 1620 1623 1628 1679 -hsync +vsync (100.7 kHz d)
[ 90.713] (II) modeset(0): Modeline "2880x1620"x60.0 303.75 2880 2928 2960 3040 1620 1623 1628 1666 +hsync -vsync (99.9 kHz d)
[ 90.713] (II) modeset(0): Modeline "2560x1600"x60.0 348.50 2560 2760 3032 3504 1600 1603 1609 1658 -hsync +vsync (99.5 kHz d)
[ 90.713] (II) modeset(0): Modeline "2560x1600"x60.0 268.50 2560 2608 2640 2720 1600 1603 1609 1646 +hsync -vsync (98.7 kHz d)
[ 90.713] (II) modeset(0): Modeline "2560x1440"x120.0 638.25 2560 2780 3064 3568 1440 1441 1444 1491 doublescan -hsync +vsync (178.9 kHz d)
[ 90.713] (II) modeset(0): Modeline "2560x1440"x120.0 469.12 2560 2584 2600 2640 1440 1441 1444 1481 doublescan +hsync -vsync (177.7 kHz d)
[ 90.713] (II) modeset(0): Modeline "2560x1440"x60.0 312.25 2560 2752 3024 3488 1440 1443 1448 1493 -hsync +vsync (89.5 kHz d)
[ 90.713] (II) modeset(0): Modeline "2560x1440"x60.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.8 kHz d)
[ 90.713] (II) modeset(0): Modeline "2048x1536"x60.0 266.95 2048 2200 2424 2800 1536 1537 1540 1589 -hsync +vsync (95.3 kHz d)
[ 90.713] (II) modeset(0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz d)
[ 90.713] (II) modeset(0): Modeline "1856x1392"x60.0 218.30 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.4 kHz d)
[ 90.713] (II) modeset(0): Modeline "1792x1344"x60.0 204.80 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.7 kHz d)
[ 90.713] (II) modeset(0): Modeline "2048x1152"x120.0 406.50 2048 2220 2444 2840 1152 1153 1156 1193 doublescan -hsync +vsync (143.1 kHz d)
[ 90.713] (II) modeset(0): Modeline "2048x1152"x120.0 302.50 2048 2072 2088 2128 1152 1153 1156 1185 doublescan +hsync -vsync (142.2 kHz d)
[ 90.713] (II) modeset(0): Modeline "2048x1152"x59.9 197.00 2048 2184 2400 2752 1152 1155 1160 1195 -hsync +vsync (71.6 kHz d)
[ 90.713] (II) modeset(0): Modeline "2048x1152"x59.9 156.75 2048 2096 2128 2208 1152 1155 1160 1185 +hsync -vsync (71.0 kHz d)
[ 90.713] (II) modeset(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz d)
[ 90.713] (II) modeset(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz d)
[ 90.713] (II) modeset(0): Modeline "1920x1080"x120.0 356.38 1920 2080 2288 2656 1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[ 90.713] (II) modeset(0): Modeline "1920x1080"x119.9 266.50 1920 1944 1960 2000 1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[ 90.713] (II) modeset(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[ 90.713] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 90.713] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[ 90.713] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 90.713] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 90.713] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 90.713] (II) modeset(0): Modeline "1600x900"x120.0 246.00 1600 1728 1900 2200 900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[ 90.713] (II) modeset(0): Modeline "1600x900"x119.9 186.50 1600 1624 1640 1680 900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[ 90.713] (II) modeset(0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d)
[ 90.713] (II) modeset(0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d)
[ 90.713] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 90.713] (II) modeset(0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d)
[ 90.713] (II) modeset(0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d)
[ 90.713] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 90.714] (II) modeset(0): Modeline "1440x810"x120.0 198.12 1440 1548 1704 1968 810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[ 90.714] (II) modeset(0): Modeline "1440x810"x119.9 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[ 90.714] (II) modeset(0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d)
[ 90.714] (II) modeset(0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d)
[ 90.714] (II) modeset(0): Modeline "1280x800"x120.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[ 90.714] (II) modeset(0): Modeline "1280x800"x119.9 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 90.714] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 90.714] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
[ 90.714] (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 90.714] (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 90.714] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 90.714] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 90.714] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 90.714] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 90.714] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 90.714] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 90.714] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 90.714] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 90.714] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 90.714] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 90.714] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 90.714] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 90.714] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 90.714] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 90.714] (II) modeset(0): EDID for output DP-1
[ 90.714] (II) modeset(0): EDID for output DP-2
[ 90.717] (II) modeset(0): EDID for output DP-3
[ 90.717] (II) modeset(0): Output eDP-1 connected
[ 90.717] (II) modeset(0): Output DP-1 disconnected
[ 90.717] (II) modeset(0): Output DP-2 disconnected
[ 90.717] (II) modeset(0): Output DP-3 disconnected
[ 90.717] (II) modeset(0): Using exact sizes for initial modes
[ 90.717] (II) modeset(0): Output eDP-1 using initial mode 3840x2160 +0+0
[ 90.717] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 90.717] (==) modeset(0): DPI set to (96, 96)
[ 90.717] (II) Loading sub module "fb"
[ 90.717] (II) LoadModule: "fb"
[ 90.717] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 90.717] (II) Module fb: vendor="X.Org Foundation"
[ 90.717] compiled for 1.20.4, module version = 1.0.0
[ 90.717] ABI class: X.Org ANSI C Emulation, version 0.4
[ 90.732] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 90.732] (==) modeset(G0): RGB weight 888
[ 90.732] (==) modeset(G0): Default visual is TrueColor
[ 90.732] (II) Loading sub module "glamoregl"
[ 90.732] (II) LoadModule: "glamoregl"
[ 90.732] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[ 90.732] (II) Module glamoregl: vendor="X.Org Foundation"
[ 90.732] compiled for 1.20.4, module version = 1.0.1
[ 90.732] ABI class: X.Org ANSI C Emulation, version 0.4
$ dmesg
[ 0.000000] microcode: microcode updated early to revision 0xb4, date = 2019-04-01
[ 0.000000] Linux version 5.1.12-300.fc30.x86_64 (mockbuild@bkernel03.phx2.fedoraproject.org) (gcc version 9.1.1 20190503 (Red Hat 9.1.1-1) (GCC)) #1 SMP Wed Jun 19 15:19:49 UTC 2019
[ 0.000000] Command line: BOOT_IMAGE=(hd0,gpt7)/vmlinuz-5.1.12-300.fc30.x86_64 root=/dev/mapper/fedora-root ro resume=/dev/mapper/fedora-swap rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet 3
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000062731fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000062732000-0x0000000062732fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000062733000-0x0000000062733fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000062734000-0x000000006c124fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000006c125000-0x000000006ef3afff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000006ef3b000-0x000000006efb7fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000006efb8000-0x000000006f4a6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000006f4a7000-0x000000006fffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x0000000077ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000078000000-0x0000000078dfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000078e00000-0x000000007f7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047c7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x5e2bf018-0x5e2e8657] usable ==> usable
[ 0.000000] e820: update [mem 0x5e2bf018-0x5e2e8657] usable ==> usable
[ 0.000000] e820: update [mem 0x5e2ae018-0x5e2be057] usable ==> usable
[ 0.000000] e820: update [mem 0x5e2ae018-0x5e2be057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009efff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000005e2ae017] usable
[ 0.000000] reserve setup_data: [mem 0x000000005e2ae018-0x000000005e2be057] usable
[ 0.000000] reserve setup_data: [mem 0x000000005e2be058-0x000000005e2bf017] usable
[ 0.000000] reserve setup_data: [mem 0x000000005e2bf018-0x000000005e2e8657] usable
[ 0.000000] reserve setup_data: [mem 0x000000005e2e8658-0x0000000062731fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000062732000-0x0000000062732fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000062733000-0x0000000062733fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000062734000-0x000000006c124fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000006c125000-0x000000006ef3afff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000006ef3b000-0x000000006efb7fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000006efb8000-0x000000006f4a6fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000006f4a7000-0x000000006fffefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000006ffff000-0x000000006fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000070000000-0x0000000077ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000078000000-0x0000000078dfffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000078e00000-0x000000007f7fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000047c7fffff] usable
[ 0.000000] efi: EFI v2.70 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0x6ef54000 ACPI=0x6ef54000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 ESRT=0x6fa90018 MEMATTR=0x69da5018 TPMEventLog=0x62864018
[ 0.000000] secureboot: Secure boot disabled
[ 0.000000] SMBIOS 3.1.1 present.
[ 0.000000] DMI: Dell Inc. XPS 15 9570/0D0T05, BIOS 1.10.1 04/26/2019
[ 0.000000] tsc: Detected 2200.000 MHz processor
[ 0.002414] tsc: Detected 2208.000 MHz TSC
[ 0.002414] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.002416] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.002424] last_pfn = 0x47c800 max_arch_pfn = 0x400000000
[ 0.002428] MTRR default type: write-back
[ 0.002429] MTRR fixed ranges enabled:
[ 0.002430] 00000-9FFFF write-back
[ 0.002431] A0000-BFFFF uncachable
[ 0.002432] C0000-FFFFF write-protect
[ 0.002432] MTRR variable ranges enabled:
[ 0.002434] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.002435] 1 base 007C000000 mask 7FFC000000 uncachable
[ 0.002435] 2 base 007B000000 mask 7FFF000000 uncachable
[ 0.002436] 3 disabled
[ 0.002436] 4 disabled
[ 0.002437] 5 disabled
[ 0.002437] 6 disabled
[ 0.002438] 7 disabled
[ 0.002438] 8 disabled
[ 0.002438] 9 disabled
[ 0.003610] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.003756] last_pfn = 0x78e00 max_arch_pfn = 0x400000000
[ 0.012765] esrt: Reserving ESRT space from 0x000000006fa90018 to 0x000000006fa90050.
[ 0.012773] Using GB pages for direct mapping
[ 0.012775] BRK [0x383e01000, 0x383e01fff] PGTABLE
[ 0.012776] BRK [0x383e02000, 0x383e02fff] PGTABLE
[ 0.012777] BRK [0x383e03000, 0x383e03fff] PGTABLE
[ 0.012798] BRK [0x383e04000, 0x383e04fff] PGTABLE
[ 0.012800] BRK [0x383e05000, 0x383e05fff] PGTABLE
[ 0.012857] BRK [0x383e06000, 0x383e06fff] PGTABLE
[ 0.012876] BRK [0x383e07000, 0x383e07fff] PGTABLE
[ 0.012930] BRK [0x383e08000, 0x383e08fff] PGTABLE
[ 0.012964] BRK [0x383e09000, 0x383e09fff] PGTABLE
[ 0.012995] RAMDISK: [mem 0x5e2e9000-0x5fb78fff]
[ 0.013005] ACPI: Early table checksum verification disabled
[ 0.013008] ACPI: RSDP 0x000000006EF54000 000024 (v02 DELL )
[ 0.013011] ACPI: XSDT 0x000000006EF540C8 000114 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.013016] ACPI: FACP 0x000000006EF95FC0 000114 (v06 DELL CBX3 01072009 AMI 00010013)
[ 0.013021] ACPI: DSDT 0x000000006EF54270 041D4D (v02 DELL CBX3 01072009 INTL 20160527)
[ 0.013024] ACPI: FACS 0x000000006F4A5C00 000040
[ 0.013026] ACPI: APIC 0x000000006EF960D8 0000F4 (v04 DELL CBX3 01072009 AMI 00010013)
[ 0.013028] ACPI: FPDT 0x000000006EF961D0 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.013031] ACPI: FIDT 0x000000006EF96218 00009C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.013033] ACPI: MCFG 0x000000006EF962B8 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.013035] ACPI: SSDT 0x000000006EF962F8 000761 (v01 SataRe SataTabl 00001000 INTL 20160527)
[ 0.013038] ACPI: SSDT 0x000000006EF96A60 0017D5 (v02 CpuRef CpuSsdt 00003000 INTL 20160527)
[ 0.013040] ACPI: BOOT 0x000000006EF98238 000028 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.013042] ACPI: SSDT 0x000000006EF98260 001336 (v02 SaSsdt SaSsdt 00003000 INTL 20160527)
[ 0.013046] ACPI: SSDT 0x000000006EF99598 002640 (v02 PegSsd PegSsdt 00001000 INTL 20160527)
[ 0.013048] ACPI: HPET 0x000000006EF9BBD8 000038 (v01 INTEL CBX3 00000002 01000013)
[ 0.013051] ACPI: SSDT 0x000000006EF9BC10 002949 (v02 INTEL xh_cfhd4 00000000 INTL 20160527)
[ 0.013053] ACPI: UEFI 0x000000006EF9E560 000048 (v01 DELL\x CBX3 00000002 01000013)
[ 0.013055] ACPI: LPIT 0x000000006EF9E5A8 00005C (v01 INTEL CBX3 00000002 01000013)
[ 0.013058] ACPI: SSDT 0x000000006EF9E608 0027DE (v02 INTEL PtidDevc 00001000 INTL 20160527)
[ 0.013060] ACPI: SSDT 0x000000006EFA0DE8 000FFE (v02 INTEL TbtTypeC 00000000 INTL 20160527)
[ 0.013062] ACPI: DBGP 0x000000006EFA1DE8 000034 (v01 DELL\x CBX3 00000002 01000013)
[ 0.013065] ACPI: DBG2 0x000000006EFA1E20 000054 (v00 DELL\x CBX3 00000002 01000013)
[ 0.013067] ACPI: SSDT 0x000000006EFA1E78 0007DC (v02 DELL\x UsbCTabl 00001000 INTL 20160527)
[ 0.013069] ACPI: SSDT 0x000000006EFA2658 00652E (v02 DptfTa DptfTabl 00001000 INTL 20160527)
[ 0.013072] ACPI: MSDM 0x000000006EFA8B88 000055 (v03 DELL CBX3 06222004 AMI 00010013)
[ 0.013074] ACPI: SLIC 0x000000006EFA8BE0 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.013077] ACPI: SSDT 0x000000006EFA8D58 000144 (v02 Intel ADebTabl 00001000 INTL 20160527)
[ 0.013079] ACPI: SSDT 0x000000006EFA8EA0 0000AE (v02 SgRef SgPeg 00001000 INTL 20160527)
[ 0.013081] ACPI: DMAR 0x000000006EFA8F50 0000A8 (v01 INTEL EDK2 00000002 01000013)
[ 0.013084] ACPI: NHLT 0x000000006EFA8FF8 00002D (v00 INTEL EDK2 00000002 01000013)
[ 0.013087] ACPI: BGRT 0x000000006EFA9028 000038 (v00 01072009 AMI 00010013)
[ 0.013089] ACPI: TPM2 0x000000006EFA9060 000034 (v04 DELL\x CBX3 00000001 AMI 00000000)
[ 0.013091] ACPI: ASF! 0x000000006EFA9098 000074 (v32 DELL\x CBX3 00000002 01000013)
[ 0.013094] ACPI: SSDT 0x000000006EFA9110 001EF0 (v01 OptRef OptTabl 00001000 INTL 20160527)
[ 0.013102] ACPI: Local APIC address 0xfee00000
[ 0.013442] No NUMA configuration found
[ 0.013443] Faking a node at [mem 0x0000000000000000-0x000000047c7fffff]
[ 0.013453] NODE_DATA(0) allocated [mem 0x47c7d5000-0x47c7fffff]
[ 0.037820] Zone ranges:
[ 0.037821] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.037822] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.037823] Normal [mem 0x0000000100000000-0x000000047c7fffff]
[ 0.037824] Device empty
[ 0.037825] Movable zone start for each node
[ 0.037828] Early memory node ranges
[ 0.037829] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.037830] node 0: [mem 0x000000000009f000-0x000000000009ffff]
[ 0.037830] node 0: [mem 0x0000000000100000-0x0000000062731fff]
[ 0.037831] node 0: [mem 0x0000000062734000-0x000000006c124fff]
[ 0.037831] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
[ 0.037832] node 0: [mem 0x0000000078000000-0x0000000078dfffff]
[ 0.037833] node 0: [mem 0x0000000100000000-0x000000047c7fffff]
[ 0.038576] Zeroed struct page in unavailable ranges: 45374 pages
[ 0.038577] Initmem setup node 0 [mem 0x0000000000001000-0x000000047c7fffff]
[ 0.038578] On node 0 totalpages: 4101826
[ 0.038580] DMA zone: 64 pages used for memmap
[ 0.038580] DMA zone: 22 pages reserved
[ 0.038581] DMA zone: 3998 pages, LIFO batch:0
[ 0.038684] DMA32 zone: 6909 pages used for memmap
[ 0.038685] DMA32 zone: 442148 pages, LIFO batch:63
[ 0.053068] Normal zone: 57120 pages used for memmap
[ 0.053069] Normal zone: 3655680 pages, LIFO batch:63
[ 0.147091] Reserving Intel graphics memory at [mem 0x7b800000-0x7f7fffff]
[ 0.148158] ACPI: PM-Timer IO Port: 0x1808
[ 0.148159] ACPI: Local APIC address 0xfee00000
[ 0.148166] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.148166] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.148167] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.148167] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.148168] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.148168] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.148169] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.148169] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.148170] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ 0.148170] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ 0.148171] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ 0.148171] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ 0.148232] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.148234] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.148235] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.148236] ACPI: IRQ0 used by override.
[ 0.148237] ACPI: IRQ9 used by override.
[ 0.148239] Using ACPI (MADT) for SMP configuration information
[ 0.148240] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.148246] smpboot: Allowing 12 CPUs, 0 hotplug CPUs
[ 0.148267] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.148269] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.148270] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.148271] PM: Registered nosave memory: [mem 0x5e2ae000-0x5e2aefff]
[ 0.148273] PM: Registered nosave memory: [mem 0x5e2be000-0x5e2befff]
[ 0.148273] PM: Registered nosave memory: [mem 0x5e2bf000-0x5e2bffff]
[ 0.148275] PM: Registered nosave memory: [mem 0x5e2e8000-0x5e2e8fff]
[ 0.148276] PM: Registered nosave memory: [mem 0x62732000-0x62732fff]
[ 0.148277] PM: Registered nosave memory: [mem 0x62733000-0x62733fff]
[ 0.148278] PM: Registered nosave memory: [mem 0x6c125000-0x6ef3afff]
[ 0.148279] PM: Registered nosave memory: [mem 0x6ef3b000-0x6efb7fff]
[ 0.148279] PM: Registered nosave memory: [mem 0x6efb8000-0x6f4a6fff]
[ 0.148280] PM: Registered nosave memory: [mem 0x6f4a7000-0x6fffefff]
[ 0.148281] PM: Registered nosave memory: [mem 0x70000000-0x77ffffff]
[ 0.148283] PM: Registered nosave memory: [mem 0x78e00000-0x7f7fffff]
[ 0.148283] PM: Registered nosave memory: [mem 0x7f800000-0xefffffff]
[ 0.148284] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[ 0.148284] PM: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
[ 0.148285] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.148285] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.148286] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.148286] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.148287] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.148287] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.148288] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.148290] [mem 0x7f800000-0xefffffff] available for PCI devices
[ 0.148290] Booting paravirtualized kernel on bare hardware
[ 0.148294] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.276768] random: get_random_bytes called from start_kernel+0x8f/0x512 with crng_init=0
[ 0.276775] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
[ 0.277153] percpu: Embedded 45 pages/cpu s147456 r8192 d28672 u262144
[ 0.277161] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
[ 0.277162] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
[ 0.277192] Built 1 zonelists, mobility grouping on. Total pages: 4037711
[ 0.277193] Policy zone: Normal
[ 0.277194] Kernel command line: BOOT_IMAGE=(hd0,gpt7)/vmlinuz-5.1.12-300.fc30.x86_64 root=/dev/mapper/fedora-root ro resume=/dev/mapper/fedora-swap rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet 3
[ 0.314303] Memory: 15968500K/16407304K available (12291K kernel code, 1536K rwdata, 4092K rodata, 2216K init, 4636K bss, 438804K reserved, 0K cma-reserved)
[ 0.314434] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[ 0.314439] Kernel/User page tables isolation: enabled
[ 0.314454] ftrace: allocating 39307 entries in 154 pages
[ 0.331034] rcu: Hierarchical RCU implementation.
[ 0.331035] rcu: RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=12.
[ 0.331036] Tasks RCU enabled.
[ 0.331036] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.331037] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
[ 0.333890] NR_IRQS: 65792, nr_irqs: 2152, preallocated irqs: 16
[ 0.334402] Console: colour dummy device 80x25
[ 0.334413] printk: console [tty0] enabled
[ 0.334428] ACPI: Core revision 20190215
[ 0.335032] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.335105] hpet clockevent registered
[ 0.335180] APIC: Switch to symmetric I/O mode setup
[ 0.335182] DMAR: Host address width 39
[ 0.335183] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.335188] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.335189] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.335192] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.335193] DMAR: RMRR base: 0x0000006f846000 end: 0x0000006fa8ffff
[ 0.335194] DMAR: RMRR base: 0x0000007b000000 end: 0x0000007f7fffff
[ 0.335195] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.335196] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.335197] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.338518] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.338519] x2apic enabled
[ 0.338551] Switched APIC routing to cluster x2apic.
[ 0.348475] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.353129] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fd3b81b95f, max_idle_ns: 440795257325 ns
[ 0.353141] Calibrating delay loop (skipped), value calculated using timer frequency.. 4416.00 BogoMIPS (lpj=2208000)
[ 0.353144] pid_max: default: 32768 minimum: 301
[ 0.356124] LSM: Security Framework initializing
[ 0.356138] Yama: becoming mindful.
[ 0.356145] SELinux: Initializing.
[ 0.356161] *** VALIDATE SELinux ***
[ 0.358201] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.359222] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.359261] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.359299] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.359439] *** VALIDATE proc ***
[ 0.359481] *** VALIDATE cgroup1 ***
[ 0.359482] *** VALIDATE cgroup2 ***
[ 0.359510] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.359510] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.359532] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.359559] process: using mwait in idle threads
[ 0.359561] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.359562] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.359563] Spectre V2 : Mitigation: Full generic retpoline
[ 0.359564] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.359564] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.359570] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.359570] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.359572] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.359597] MDS: Mitigation: Clear CPU buffers
[ 0.359858] Freeing SMP alternatives memory: 36K
[ 0.361206] TSC deadline timer enabled
[ 0.361217] smpboot: CPU0: Intel(R) Core(TM) i7-8750H CPU @ 2.20GHz (family: 0x6, model: 0x9e, stepping: 0xa)
[ 0.361304] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.361336] ... version: 4
[ 0.361336] ... bit width: 48
[ 0.361337] ... generic registers: 4
[ 0.361338] ... value mask: 0000ffffffffffff
[ 0.361338] ... max period: 00007fffffffffff
[ 0.361339] ... fixed-purpose events: 3
[ 0.361339] ... event mask: 000000070000000f
[ 0.361380] rcu: Hierarchical SRCU implementation.
[ 0.361933] random: crng done (trusting CPU's manufacturer)
[ 0.362630] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.362724] smp: Bringing up secondary CPUs ...
[ 0.362789] x86: Booting SMP configuration:
[ 0.362789] .... node #0, CPUs: #1 #2 #3 #4 #5 #6
[ 0.366500] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.366500] #7 #8 #9 #10 #11
[ 0.369608] smp: Brought up 1 node, 12 CPUs
[ 0.369608] smpboot: Max logical packages: 1
[ 0.369608] smpboot: Total of 12 processors activated (52992.00 BogoMIPS)
[ 0.370564] devtmpfs: initialized
[ 0.370564] x86/mm: Memory block size: 128MB
[ 0.371638] PM: Registering ACPI NVS region [mem 0x62732000-0x62732fff] (4096 bytes)
[ 0.371638] PM: Registering ACPI NVS region [mem 0x6efb8000-0x6f4a6fff] (5173248 bytes)
[ 0.371638] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.371638] futex hash table entries: 4096 (order: 6, 262144 bytes)
[ 0.371638] pinctrl core: initialized pinctrl subsystem
[ 0.372135] PM: RTC time: 08:28:18, date: 2019-07-02
[ 0.372255] NET: Registered protocol family 16
[ 0.372359] audit: initializing netlink subsys (disabled)
[ 0.372367] audit: type=2000 audit(1562056098.037:1): state=initialized audit_enabled=0 res=1
[ 0.372367] cpuidle: using governor menu
[ 0.372367] Simple Boot Flag at 0x47 set to 0x80
[ 0.372367] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.372367] ACPI: bus type PCI registered
[ 0.372367] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.372367] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.372367] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[ 0.372367] PCI: Using configuration type 1 for base access
[ 0.374165] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.374165] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.374165] cryptd: max_cpu_qlen set to 1000
[ 0.374196] ACPI: Added _OSI(Module Device)
[ 0.374197] ACPI: Added _OSI(Processor Device)
[ 0.374197] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.374198] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.374199] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.374200] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.374201] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.427765] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS01._UPC], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.427770] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.427771] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.427773] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS01._PLD], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.427776] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.427777] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.428105] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS02._UPC], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.428108] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.428109] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.428110] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS02._PLD], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.428112] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.428113] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.428440] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS03._UPC], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.428443] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.428444] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.428445] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS03._PLD], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.428447] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.428448] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.428767] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS04._UPC], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.428770] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.428771] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.428772] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS04._PLD], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.428774] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.428775] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.429093] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS05._UPC], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.429095] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.429096] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.429098] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS05._PLD], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.429100] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.429101] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.429423] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS06._UPC], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.429426] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.429427] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.429428] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS06._PLD], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.429430] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.429431] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.429750] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS07._UPC], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.429753] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.429754] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.429755] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS07._PLD], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.429757] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.429758] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.430077] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS08._UPC], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.430080] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.430081] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.430082] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS08._PLD], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.430084] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.430085] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.430408] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS09._UPC], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.430411] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.430412] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.430413] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS09._PLD], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.430415] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.430416] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.430736] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS10._UPC], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.430738] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.430739] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.430740] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS10._PLD], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.430742] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.430743] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.431063] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS11._UPC], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.431066] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.431067] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.431068] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS11._PLD], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.431070] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.431071] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.431393] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS12._UPC], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.431395] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.431396] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.431398] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS12._PLD], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.431400] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.431401] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.431742] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.USR1._UPC], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.431745] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.431746] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.431747] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.USR1._PLD], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.431749] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.431750] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.431752] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.USR2._UPC], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.431754] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.431755] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.431757] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.USR2._PLD], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.431758] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.431759] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.431798] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS01._UPC], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.431800] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.431801] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.431802] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS01._PLD], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.431804] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.431805] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.431843] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS02._UPC], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.431846] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.431847] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.431848] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS02._PLD], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.431850] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.431851] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.431889] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS03._UPC], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.431891] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.431892] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.431893] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS03._PLD], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.431895] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.431896] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.431934] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS04._UPC], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.431936] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.431937] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.431938] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS04._PLD], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.431940] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.431941] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.431979] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS05._UPC], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.431981] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.431982] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.431984] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS05._PLD], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.431986] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.431987] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.432024] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS06._UPC], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.432027] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.432028] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.432029] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS06._PLD], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.432031] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.432032] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.432070] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS07._UPC], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.432072] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.432073] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.432074] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS07._PLD], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.432076] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.432077] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.432115] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS08._UPC], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.432117] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.432119] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.432120] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS08._PLD], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.432122] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.432123] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.432164] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS09._UPC], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.432166] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.432167] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.432168] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS09._PLD], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.432170] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.432171] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.432210] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS10._UPC], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.432212] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.432213] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.432214] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.SS10._PLD], AE_ALREADY_EXISTS (20190215/dswload2-323)
[ 0.432216] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190215/psobject-220)
[ 0.432217] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ 0.436525] ACPI: 13 ACPI AML tables successfully acquired and loaded
[ 0.447561] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.457256] ACPI: Dynamic OEM Table Load:
[ 0.457263] ACPI: SSDT 0xFFFF927DE9670800 0005A9 (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
[ 0.457800] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[ 0.458747] ACPI: Dynamic OEM Table Load:
[ 0.458753] ACPI: SSDT 0xFFFF927DE967A000 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
[ 0.459272] ACPI: Dynamic OEM Table Load:
[ 0.459277] ACPI: SSDT 0xFFFF927DE96BA200 00011B (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
[ 0.459707] ACPI: Dynamic OEM Table Load:
[ 0.459712] ACPI: SSDT 0xFFFF927DE9671000 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527)
[ 0.460513] ACPI: Dynamic OEM Table Load:
[ 0.460521] ACPI: SSDT 0xFFFF927DE953B000 000EF1 (v02 PmRef ApIst 00003000 INTL 20160527)
[ 0.461663] ACPI: Dynamic OEM Table Load:
[ 0.461668] ACPI: SSDT 0xFFFF927DE967D800 000317 (v02 PmRef ApHwp 00003000 INTL 20160527)
[ 0.462203] ACPI: Dynamic OEM Table Load:
[ 0.462207] ACPI: SSDT 0xFFFF927DE967C400 00030A (v02 PmRef ApCst 00003000 INTL 20160527)
[ 0.466533] ACPI: EC: EC started
[ 0.466533] ACPI: EC: interrupt blocked
[ 0.472316] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[ 0.472319] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.472320] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[ 0.472321] ACPI: Interpreter enabled
[ 0.472376] ACPI: (supports S0 S3 S4 S5)
[ 0.472377] ACPI: Using IOAPIC for interrupt routing
[ 0.472433] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.473070] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.474999] ACPI: Power Resource [PG00] (on)
[ 0.496452] ACPI: Power Resource [WRST] (on)
[ 0.496778] ACPI: Power Resource [DRST] (on)
[ 0.506597] ACPI: Power Resource [USBC] (on)
[ 0.510079] ACPI: Power Resource [V0PR] (on)
[ 0.510525] ACPI: Power Resource [V1PR] (on)
[ 0.510951] ACPI: Power Resource [V2PR] (on)
[ 0.517160] ACPI: Power Resource [WRST] (on)
[ 0.533283] ACPI: Power Resource [PIN] (off)
[ 0.533727] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[ 0.533734] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.535417] acpi PNP0A08:00: _OSC: platform does not support [AER]
[ 0.538562] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR]
[ 0.538563] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.539453] PCI host bridge to bus 0000:00
[ 0.539456] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.539457] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.539458] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.539459] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.539460] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.539461] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.539462] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.539463] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.539463] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.539464] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.539465] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.539466] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xefffffff window]
[ 0.539467] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[ 0.539469] pci_bus 0000:00: root bus resource [bus 00-7e]
[ 0.539476] pci 0000:00:00.0: [8086:3ec4] type 00 class 0x060000
[ 0.539604] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.539652] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.539880] pci 0000:00:02.0: [8086:3e9b] type 00 class 0x030000
[ 0.539891] pci 0000:00:02.0: reg 0x10: [mem 0xeb000000-0xebffffff 64bit]
[ 0.539896] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.539900] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.539916] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.540042] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.540053] pci 0000:00:04.0: reg 0x10: [mem 0xed610000-0xed617fff 64bit]
[ 0.540237] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[ 0.540248] pci 0000:00:08.0: reg 0x10: [mem 0xed628000-0xed628fff 64bit]
[ 0.540465] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
[ 0.540511] pci 0000:00:12.0: reg 0x10: [mem 0xed627000-0xed627fff 64bit]
[ 0.540836] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
[ 0.540883] pci 0000:00:14.0: reg 0x10: [mem 0xed600000-0xed60ffff 64bit]
[ 0.541029] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.541494] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
[ 0.541531] pci 0000:00:14.2: reg 0x10: [mem 0xed61e000-0xed61ffff 64bit]
[ 0.541551] pci 0000:00:14.2: reg 0x18: [mem 0xed626000-0xed626fff 64bit]
[ 0.542028] pci 0000:00:15.0: [8086:a368] type 00 class 0x0c8000
[ 0.542745] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.545361] pci 0000:00:15.1: [8086:a369] type 00 class 0x0c8000
[ 0.546090] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.548511] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
[ 0.548554] pci 0000:00:16.0: reg 0x10: [mem 0xed623000-0xed623fff 64bit]
[ 0.548678] pci 0000:00:16.0: PME# supported from D3hot
[ 0.548934] pci 0000:00:17.0: [8086:a353] type 00 class 0x010601
[ 0.548997] pci 0000:00:17.0: reg 0x10: [mem 0xed61c000-0xed61dfff]
[ 0.549022] pci 0000:00:17.0: reg 0x14: [mem 0xed622000-0xed6220ff]
[ 0.549048] pci 0000:00:17.0: reg 0x18: [io 0x4090-0x4097]
[ 0.549071] pci 0000:00:17.0: reg 0x1c: [io 0x4080-0x4083]
[ 0.549095] pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f]
[ 0.549120] pci 0000:00:17.0: reg 0x24: [mem 0xed621000-0xed6217ff]
[ 0.549262] pci 0000:00:17.0: PME# supported from D3hot
[ 0.549542] pci 0000:00:1b.0: [8086:a340] type 01 class 0x060400
[ 0.549831] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.549882] pci 0000:00:1b.0: PTM enabled (root), 4dns granularity
[ 0.550149] pci 0000:00:1c.0: [8086:a338] type 01 class 0x060400
[ 0.550393] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.550441] pci 0000:00:1c.0: PTM enabled (root), 4dns granularity
[ 0.550666] pci 0000:00:1c.4: [8086:a33c] type 01 class 0x060400
[ 0.550905] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.550955] pci 0000:00:1c.4: PTM enabled (root), 4dns granularity
[ 0.551171] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
[ 0.551405] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.551453] pci 0000:00:1d.0: PTM enabled (root), 4dns granularity
[ 0.551725] pci 0000:00:1f.0: [8086:a30e] type 00 class 0x060100
[ 0.552025] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040380
[ 0.552103] pci 0000:00:1f.3: reg 0x10: [mem 0xed618000-0xed61bfff 64bit]
[ 0.552176] pci 0000:00:1f.3: reg 0x20: [mem 0xed100000-0xed1fffff 64bit]
[ 0.552328] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.553143] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
[ 0.553335] pci 0000:00:1f.4: reg 0x10: [mem 0xed620000-0xed6200ff 64bit]
[ 0.553549] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 0.553904] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
[ 0.553932] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[ 0.554167] pci 0000:01:00.0: [10de:1c8c] type 00 class 0x030200
[ 0.554181] pci 0000:01:00.0: reg 0x10: [mem 0xec000000-0xecffffff]
[ 0.554189] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.554196] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.554201] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
[ 0.554207] pci 0000:01:00.0: reg 0x30: [mem 0xed000000-0xed07ffff pref]
[ 0.554352] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.554354] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.554356] pci 0000:00:01.0: bridge window [mem 0xec000000-0xed0fffff]
[ 0.554359] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.554533] pci 0000:00:1b.0: PCI bridge to [bus 02-3a]
[ 0.554542] pci 0000:00:1b.0: bridge window [mem 0xd4000000-0xea0fffff]
[ 0.554552] pci 0000:00:1b.0: bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
[ 0.555081] pci 0000:3b:00.0: [168c:003e] type 00 class 0x028000
[ 0.555576] pci 0000:3b:00.0: reg 0x10: [mem 0xed200000-0xed3fffff 64bit]
[ 0.557356] pci 0000:3b:00.0: PME# supported from D0 D3hot D3cold
[ 0.559097] pci 0000:00:1c.0: PCI bridge to [bus 3b]
[ 0.559106] pci 0000:00:1c.0: bridge window [mem 0xed200000-0xed3fffff]
[ 0.559309] pci 0000:3c:00.0: [10ec:525a] type 00 class 0xff0000
[ 0.559357] pci 0000:3c:00.0: reg 0x14: [mem 0xed500000-0xed500fff]
[ 0.559525] pci 0000:3c:00.0: supports D1 D2
[ 0.559526] pci 0000:3c:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.559727] pci 0000:00:1c.4: PCI bridge to [bus 3c]
[ 0.559735] pci 0000:00:1c.4: bridge window [mem 0xed500000-0xed5fffff]
[ 0.559920] pci 0000:3d:00.0: [1179:011a] type 00 class 0x010802
[ 0.559969] pci 0000:3d:00.0: reg 0x10: [mem 0xed400000-0xed403fff 64bit]
[ 0.560342] pci 0000:00:1d.0: PCI bridge to [bus 3d]
[ 0.560351] pci 0000:00:1d.0: bridge window [mem 0xed400000-0xed4fffff]
[ 0.564156] ACPI: PCI Interrupt Link [LNKA] (IRQs) *0
[ 0.564192] ACPI: PCI Interrupt Link [LNKB] (IRQs) *1
[ 0.564226] ACPI: PCI Interrupt Link [LNKC] (IRQs) *0
[ 0.564260] ACPI: PCI Interrupt Link [LNKD] (IRQs) *0
[ 0.564294] ACPI: PCI Interrupt Link [LNKE] (IRQs) *0
[ 0.564327] ACPI: PCI Interrupt Link [LNKF] (IRQs) *0
[ 0.564361] ACPI: PCI Interrupt Link [LNKG] (IRQs) *0
[ 0.564394] ACPI: PCI Interrupt Link [LNKH] (IRQs) *0
[ 0.578275] ACPI: EC: interrupt unblocked
[ 0.578303] ACPI: EC: event unblocked
[ 0.578348] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.578349] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions and events
[ 0.578453] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.578453] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.578453] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.578453] vgaarb: loaded
[ 0.578453] SCSI subsystem initialized
[ 0.578453] libata version 3.00 loaded.
[ 0.578453] ACPI: bus type USB registered
[ 0.578453] usbcore: registered new interface driver usbfs
[ 0.578453] usbcore: registered new interface driver hub
[ 0.578453] usbcore: registered new device driver usb
[ 0.578453] pps_core: LinuxPPS API ver. 1 registered
[ 0.578453] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.578453] PTP clock support registered
[ 0.578453] EDAC MC: Ver: 3.0.0
[ 0.579448] Registered efivars operations
[ 0.640171] PCI: Using ACPI for IRQ routing
[ 0.666334] PCI: pci_cache_line_size set to 64 bytes
[ 0.666898] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.666900] e820: reserve RAM buffer [mem 0x5e2ae018-0x5fffffff]
[ 0.666900] e820: reserve RAM buffer [mem 0x5e2bf018-0x5fffffff]
[ 0.666901] e820: reserve RAM buffer [mem 0x62732000-0x63ffffff]
[ 0.666902] e820: reserve RAM buffer [mem 0x6c125000-0x6fffffff]
[ 0.666903] e820: reserve RAM buffer [mem 0x78e00000-0x7bffffff]
[ 0.666904] e820: reserve RAM buffer [mem 0x47c800000-0x47fffffff]
[ 0.666997] NetLabel: Initializing
[ 0.666998] NetLabel: domain hash size = 128
[ 0.666998] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.667010] NetLabel: unlabeled traffic allowed by default
[ 0.667199] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.667203] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.670157] clocksource: Switched to clocksource tsc-early
[ 0.682380] VFS: Disk quotas dquot_6.6.0
[ 0.682397] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.682418] *** VALIDATE hugetlbfs ***
[ 0.682442] pnp: PnP ACPI init
[ 0.682682] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.682684] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.682688] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.682705] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.682813] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.682816] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.682928] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.682943] pnp 00:04: Plug and Play ACPI device, IDs DLL087c PNP0f13 (active)
[ 0.683123] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.683125] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.683127] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.683128] system 00:05: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.683129] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.683130] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.683132] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.683137] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.683140] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.683403] system 00:06: [io 0x1800-0x18fe] could not be reserved
[ 0.683404] system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved
[ 0.683406] system 00:06: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[ 0.683407] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved
[ 0.683408] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.683409] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved
[ 0.683410] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.683413] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.683759] system 00:07: [io 0x2000-0x20fe] has been reserved
[ 0.683761] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.684934] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.689882] pnp: PnP ACPI: found 9 devices
[ 0.695470] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.695503] pci 0000:00:1b.0: bridge window [io 0x1000-0x0fff] to [bus 02-3a] add_size 1000
[ 0.695516] pci 0000:00:15.0: BAR 0: assigned [mem 0x7f800000-0x7f800fff 64bit]
[ 0.695791] pci 0000:00:15.1: BAR 0: assigned [mem 0x7f801000-0x7f801fff 64bit]
[ 0.696059] pci 0000:00:1b.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.696061] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.696062] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.696065] pci 0000:00:01.0: bridge window [mem 0xec000000-0xed0fffff]
[ 0.696067] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.696071] pci 0000:00:1b.0: PCI bridge to [bus 02-3a]
[ 0.696077] pci 0000:00:1b.0: bridge window [io 0x5000-0x5fff]
[ 0.696084] pci 0000:00:1b.0: bridge window [mem 0xd4000000-0xea0fffff]
[ 0.696089] pci 0000:00:1b.0: bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
[ 0.696099] pci 0000:00:1c.0: PCI bridge to [bus 3b]
[ 0.696107] pci 0000:00:1c.0: bridge window [mem 0xed200000-0xed3fffff]
[ 0.696120] pci 0000:00:1c.4: PCI bridge to [bus 3c]
[ 0.696128] pci 0000:00:1c.4: bridge window [mem 0xed500000-0xed5fffff]
[ 0.696144] pci 0000:00:1d.0: PCI bridge to [bus 3d]
[ 0.696151] pci 0000:00:1d.0: bridge window [mem 0xed400000-0xed4fffff]
[ 0.696165] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.696166] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.696167] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.696168] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.696169] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.696170] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.696171] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.696172] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.696173] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.696173] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.696174] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.696175] pci_bus 0000:00: resource 15 [mem 0x7f800000-0xefffffff window]
[ 0.696176] pci_bus 0000:00: resource 16 [mem 0xfc800000-0xfe7fffff window]
[ 0.696177] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.696178] pci_bus 0000:01: resource 1 [mem 0xec000000-0xed0fffff]
[ 0.696179] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.696180] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.696181] pci_bus 0000:02: resource 1 [mem 0xd4000000-0xea0fffff]
[ 0.696182] pci_bus 0000:02: resource 2 [mem 0x90000000-0xb1ffffff 64bit pref]
[ 0.696183] pci_bus 0000:3b: resource 1 [mem 0xed200000-0xed3fffff]
[ 0.696184] pci_bus 0000:3c: resource 1 [mem 0xed500000-0xed5fffff]
[ 0.696185] pci_bus 0000:3d: resource 1 [mem 0xed400000-0xed4fffff]
[ 0.696339] NET: Registered protocol family 2
[ 0.696472] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.696525] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.696690] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.696788] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.696822] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.696868] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.696956] NET: Registered protocol family 1
[ 0.696961] NET: Registered protocol family 44
[ 0.696975] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.697567] PCI: CLS 64 bytes, default 64
[ 0.697604] Unpacking initramfs...
[ 1.095604] Freeing initrd memory: 25152K
[ 1.105211] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.105213] software IO TLB: mapped [mem 0x63895000-0x67895000] (64MB)
[ 1.105261] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fd3b81b95f, max_idle_ns: 440795257325 ns
[ 1.105287] clocksource: Switched to clocksource tsc
[ 1.108011] Initialise system trusted keyrings
[ 1.108018] Key type blacklist registered
[ 1.108053] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 1.109210] zbud: loaded
[ 1.109928] Platform Keyring initialized
[ 1.269929] alg: No test for lzo-rle (lzo-rle-generic)
[ 1.270840] alg: No test for lzo-rle (lzo-rle-scomp)
[ 1.271745] alg: No test for 842 (842-generic)
[ 1.272644] alg: No test for 842 (842-scomp)
[ 1.302028] NET: Registered protocol family 38
[ 1.302030] Key type asymmetric registered
[ 1.302031] Asymmetric key parser 'x509' registered
[ 1.302043] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 1.302082] io scheduler mq-deadline registered
[ 1.302082] io scheduler kyber registered
[ 1.302129] io scheduler bfq registered
[ 1.302235] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 1.302559] pcieport 0000:00:01.0: Signaling PME with IRQ 122
[ 1.302822] pcieport 0000:00:1b.0: Signaling PME with IRQ 123
[ 1.302856] pciehp 0000:00:1b.0:pcie004: Slot #20 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 1.303222] pcieport 0000:00:1c.0: Signaling PME with IRQ 124
[ 1.303547] pcieport 0000:00:1c.4: Signaling PME with IRQ 125
[ 1.303870] pcieport 0000:00:1d.0: Signaling PME with IRQ 126
[ 1.304002] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.304028] efifb: probing for efifb
[ 1.304045] efifb: showing boot graphics
[ 1.306227] efifb: framebuffer at 0x80000000, using 32400k, total 32400k
[ 1.306228] efifb: mode is 3840x2160x32, linelength=15360, pages=1
[ 1.306228] efifb: scrolling: redraw
[ 1.306229] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.306271] fbcon: Deferring console take-over
[ 1.306272] fb0: EFI VGA frame buffer device
[ 1.306279] intel_idle: MWAIT substates: 0x11142120
[ 1.306280] intel_idle: v0.4.1 model 0x9E
[ 1.306852] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.308953] ACPI: AC Adapter [AC] (off-line)
[ 1.309023] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.309034] ACPI: Lid Switch [LID0]
[ 1.309059] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.309066] ACPI: Power Button [PBTN]
[ 1.309088] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 1.309093] ACPI: Sleep Button [SBTN]
[ 1.309117] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.309123] ACPI: Power Button [PWRF]
[ 1.312579] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.312581] ACPI: Thermal Zone [THM] (25 C)
[ 1.312765] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.315396] Non-volatile memory driver v1.3
[ 1.315420] Linux agpgart interface v0.103
[ 1.342363] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFC, rev-id 1)
[ 1.371735] ahci 0000:00:17.0: version 3.0
[ 1.372140] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 1.372207] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x4 impl SATA mode
[ 1.372209] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst
[ 1.372733] scsi host0: ahci
[ 1.373066] scsi host1: ahci
[ 1.373418] scsi host2: ahci
[ 1.373469] ata1: DUMMY
[ 1.373470] ata2: DUMMY
[ 1.373477] ata3: SATA max UDMA/133 abar m2048@0xed621000 port 0xed621200 irq 127
[ 1.373550] libphy: Fixed MDIO Bus: probed
[ 1.373617] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.373620] ehci-pci: EHCI PCI platform driver
[ 1.373630] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.373631] ohci-pci: OHCI PCI platform driver
[ 1.373638] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.373818] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.373861] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.374977] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[ 1.374984] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.375221] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[ 1.375222] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.375223] usb usb1: Product: xHCI Host Controller
[ 1.375224] usb usb1: Manufacturer: Linux 5.1.12-300.fc30.x86_64 xhci-hcd
[ 1.375225] usb usb1: SerialNumber: 0000:00:14.0
[ 1.375312] hub 1-0:1.0: USB hub found
[ 1.375335] hub 1-0:1.0: 16 ports detected
[ 1.376520] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.376552] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.376555] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.376589] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01
[ 1.376590] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.376591] usb usb2: Product: xHCI Host Controller
[ 1.376592] usb usb2: Manufacturer: Linux 5.1.12-300.fc30.x86_64 xhci-hcd
[ 1.376592] usb usb2: SerialNumber: 0000:00:14.0
[ 1.376667] hub 2-0:1.0: USB hub found
[ 1.376687] hub 2-0:1.0: 10 ports detected
[ 1.376946] usb: port power management may be unreliable
[ 1.377425] usbcore: registered new interface driver usbserial_generic
[ 1.377429] usbserial: USB Serial support registered for generic
[ 1.377456] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.377947] i8042: Warning: Keylock active
[ 1.379937] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.379958] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.380009] mousedev: PS/2 mouse device common for all mice
[ 1.380158] rtc_cmos 00:01: RTC can wake from S4
[ 1.381463] rtc_cmos 00:01: registered as rtc0
[ 1.381464] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[ 1.381504] device-mapper: uevent: version 1.0.3
[ 1.381577] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[ 1.381672] intel_pstate: Intel P-state driver initializing
[ 1.381760] intel_pstate: Disabling energy efficiency optimization
[ 1.382045] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.383807] intel_pstate: HWP enabled
[ 1.383979] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.383994] usbcore: registered new interface driver usbhid
[ 1.383994] usbhid: USB HID core driver
[ 1.384032] intel_pmc_core: initialized
[ 1.384065] drop_monitor: Initializing network drop monitor service
[ 1.384138] Initializing XFRM netlink socket
[ 1.384230] NET: Registered protocol family 10
[ 1.386790] Segment Routing with IPv6
[ 1.386801] mip6: Mobile IPv6
[ 1.386802] NET: Registered protocol family 17
[ 1.387929] mce: Using 12 MCE banks
[ 1.387936] RAS: Correctable Errors collector initialized.
[ 1.387986] microcode: sig=0x906ea, pf=0x20, revision=0xb4
[ 1.388422] microcode: Microcode Update Driver: v2.2.
[ 1.388428] AVX2 version of gcm_enc/dec engaged.
[ 1.388429] AES CTR mode by8 optimization enabled
[ 1.414158] sched_clock: Marking stable (1413397919, 754455)->(1447414128, -33261754)
[ 1.414564] registered taskstats version 1
[ 1.414570] Loading compiled-in X.509 certificates
[ 1.443210] Loaded X.509 cert 'Fedora kernel signing key: bc1bb2c8e4f455b0161015d07fa785047bd514f2'
[ 1.443228] zswap: loaded using pool lzo/zbud
[ 1.448545] Key type big_key registered
[ 1.450727] Key type encrypted registered
[ 1.452229] integrity: Loading X.509 certificate: UEFI:db
[ 1.452274] integrity: Loaded X.509 cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7'
[ 1.452274] integrity: Loading X.509 certificate: UEFI:db
[ 1.452288] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 1.452288] integrity: Loading X.509 certificate: UEFI:db
[ 1.452299] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 1.453855] ima: Allocated hash algorithm: sha1
[ 1.478129] No architecture policies found
[ 1.481899] PM: Magic number: 11:926:471
[ 1.482316] rtc_cmos 00:01: setting system clock to 2019-07-02T08:28:20 UTC (1562056100)
[ 1.687536] ata3: SATA link down (SStatus 4 SControl 300)
[ 1.697440] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[ 1.824968] usb 1-4: New USB device found, idVendor=0cf3, idProduct=e300, bcdDevice= 0.01
[ 1.824971] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.942225] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[ 2.070051] usb 1-7: New USB device found, idVendor=27c6, idProduct=5395, bcdDevice= 1.00
[ 2.070054] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.070056] usb 1-7: Product: Goodix Fingerprint Device
[ 2.070058] usb 1-7: Manufacturer: HTMicroelectronics
[ 2.070060] usb 1-7: SerialNumber: HTK32
[ 2.186223] usb 1-12: new high-speed USB device number 4 using xhci_hcd
[ 2.189183] psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4646]
[ 2.219430] psmouse serio1: synaptics: queried min coordinates: x [1278..], y [1206..]
[ 2.219438] psmouse serio1: synaptics: Your touchpad (PNP: DLL087c PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 2.278761] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x12e800/0x0, board id: 3125, fw id: 2378871
[ 2.315540] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 2.320902] Freeing unused decrypted memory: 2040K
[ 2.321639] Freeing unused kernel image memory: 2216K
[ 2.328389] Write protecting the kernel read-only data: 18432k
[ 2.329521] Freeing unused kernel image memory: 2016K
[ 2.329819] Freeing unused kernel image memory: 4K
[ 2.331093] usb 1-12: New USB device found, idVendor=0bda, idProduct=5657, bcdDevice=82.25
[ 2.331096] usb 1-12: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.331099] usb 1-12: Product: Integrated_Webcam_HD
[ 2.331100] usb 1-12: Manufacturer: CN0VGCNHLOG008BCB8KSA00
[ 2.331102] usb 1-12: SerialNumber: 200901010001
[ 2.338211] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.338217] rodata_test: all tests were successful
[ 2.338217] x86/mm: Checking user space page tables
[ 2.343476] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.343478] Run /init as init process
[ 2.490873] systemd[1]: systemd v241-8.git9ef65cb.fc30 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 2.502354] systemd[1]: Detected architecture x86-64.
[ 2.502355] systemd[1]: Running in initial RAM disk.
[ 2.505654] systemd[1]: Set hostname to <r4ph3rd>.
[ 2.505785] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[ 2.538283] systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice.
[ 2.538340] systemd[1]: Listening on udev Kernel Socket.
[ 2.538392] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.538398] systemd[1]: Reached target Swap.
[ 2.538448] systemd[1]: Listening on Journal Socket.
[ 2.720898] audit: type=1130 audit(1562056101.737:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.815892] audit: type=1130 audit(1562056101.832:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.883202] acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03)
[ 2.883259] wmi_bus wmi_bus-PNP0C14:05: WQBC data block query control method not found
[ 2.883261] acpi PNP0C14:05: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03)
[ 2.889093] audit: type=1130 audit(1562056101.904:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.892373] acpi PNP0C14:06: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03)
[ 2.898826] acpi PNP0C14:07: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03)
[ 2.903645] audit: type=1130 audit(1562056101.920:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 2.918393] rtsx_pci 0000:3c:00.0: enabling device (0000 -> 0002)
[ 2.925666] nvme nvme0: pci function 0000:3d:00.0
[ 3.031608] MXM: GUID detected in BIOS
[ 3.031638] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20190215/nsarguments-59)
[ 3.031679] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20190215/nsarguments-59)
[ 3.031850] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[ 3.031852] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[ 3.031852] nouveau: detected PR support, will not use DSM
[ 3.031871] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 3.031978] checking generic (80000000 1fa4000) vs hw (c0000000 10000000)
[ 3.031978] checking generic (80000000 1fa4000) vs hw (d0000000 2000000)
[ 3.032021] nouveau 0000:01:00.0: NVIDIA GP107 (137000a1)
[ 3.050754] checking generic (80000000 1fa4000) vs hw (80000000 10000000)
[ 3.050755] fb0: switching to inteldrmfb from EFI VGA
[ 3.050818] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 3.056560] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.056561] [drm] Driver supports precise vblank timestamp query.
[ 3.058711] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.059051] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 3.077728] nouveau 0000:01:00.0: bios: version 86.07.63.00.6d
[ 3.133526] nouveau 0000:01:00.0: fb: 4096 MiB GDDR5
[ 3.141389] nvme nvme0: 12/0/0 default/read/poll queues
[ 3.143716] nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8
[ 3.176204] vga_switcheroo: enabled
[ 3.176256] [TTM] Zone kernel: Available graphics memory: 8026732 kiB
[ 3.176257] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 3.176258] [TTM] Initializing pool allocator
[ 3.176261] [TTM] Initializing DMA pool allocator
[ 3.176275] nouveau 0000:01:00.0: DRM: VRAM: 4096 MiB
[ 3.176276] nouveau 0000:01:00.0: DRM: GART: 536870912 MiB
[ 3.176278] nouveau 0000:01:00.0: DRM: BIT table 'A' not found
[ 3.176279] nouveau 0000:01:00.0: DRM: BIT table 'L' not found
[ 3.176280] nouveau 0000:01:00.0: DRM: Pointer to TMDS table invalid
[ 3.176281] nouveau 0000:01:00.0: DRM: DCB version 4.1
[ 3.177368] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 3.177537] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[ 3.382469] [drm] Initialized i915 1.6.0 20190207 for 0000:00:02.0 on minor 0
[ 3.384838] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.385567] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 3.385606] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
[ 3.385622] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/LNXVIDEO:01/input/input8
[ 3.394909] fbcon: inteldrmfb (fb0) is primary device
[ 3.394910] fbcon: Deferring console take-over
[ 3.394913] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.602808] PM: Image not found (code -22)
[ 3.604783] audit: type=1130 audit(1562056102.621:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-hibernate-resume@dev-mapper-fedora\x2dswap comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.604802] audit: type=1131 audit(1562056102.621:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-hibernate-resume@dev-mapper-fedora\x2dswap comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.619564] audit: type=1130 audit(1562056102.636:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.623235] audit: type=1130 audit(1562056102.640:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.693414] audit: type=1130 audit(1562056102.710:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.704437] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 4.787806] systemd-journald[335]: Received SIGTERM from PID 1 (systemd).
[ 4.804566] printk: systemd: 23 output lines suppressed due to ratelimiting
[ 5.226156] SELinux: policy capability network_peer_controls=1
[ 5.226157] SELinux: policy capability open_perms=1
[ 5.226157] SELinux: policy capability extended_socket_class=1
[ 5.226157] SELinux: policy capability always_check_network=0
[ 5.226158] SELinux: policy capability cgroup_seclabel=1
[ 5.226158] SELinux: policy capability nnp_nosuid_transition=1
[ 5.241714] systemd[1]: Successfully loaded SELinux policy in 386.299ms.
[ 5.246803] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[ 5.276915] systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 18.218ms.
[ 5.278516] systemd[1]: systemd v241-8.git9ef65cb.fc30 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 5.290371] systemd[1]: Detected architecture x86-64.
[ 5.291128] systemd[1]: Set hostname to <r4ph3rd>.
[ 5.291698] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[ 5.303016] systemd-system-update-generator[690]: Offline system update overridden by runlevel "3" on the kernel command line
[ 5.352422] systemd[1]: /usr/lib/systemd/system/gssproxy.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/gssproxy.pid → /run/gssproxy.pid; please update the unit file accordingly.
[ 5.369257] systemd[1]: /usr/lib/systemd/system/sssd.service:11: PIDFile= references path below legacy directory /var/run/, updating /var/run/sssd.pid → /run/sssd.pid; please update the unit file accordingly.
[ 5.369594] systemd[1]: /usr/lib/systemd/system/mdmonitor.service:6: PIDFile= references path below legacy directory /var/run/, updating /var/run/mdadm/mdadm.pid → /run/mdadm/mdadm.pid; please update the unit file accordingly.
[ 5.370319] systemd[1]: /usr/lib/systemd/system/iscsid.service:10: PIDFile= references path below legacy directory /var/run/, updating /var/run/iscsid.pid → /run/iscsid.pid; please update the unit file accordingly.
[ 5.370499] systemd[1]: /usr/lib/systemd/system/iscsiuio.service:12: PIDFile= references path below legacy directory /var/run/, updating /var/run/iscsiuio.pid → /run/iscsiuio.pid; please update the unit file accordingly.
[ 5.421966] kauditd_printk_skb: 23 callbacks suppressed
[ 5.421966] audit: type=1131 audit(1562048904.438:34): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.422098] systemd[1]: initrd-switch-root.service: Succeeded.
[ 5.422483] audit: type=1130 audit(1562048904.439:35): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.422491] audit: type=1131 audit(1562048904.439:36): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.422625] audit: type=1130 audit(1562048904.439:37): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.422632] audit: type=1131 audit(1562048904.439:38): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.433775] Adding 8093692k swap on /dev/mapper/fedora-swap. Priority:-2 extents:1 across:8093692k SSFS
[ 5.437526] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 5.447651] audit: type=1130 audit(1562048904.464:39): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.448422] audit: type=1130 audit(1562048904.465:40): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.448977] audit: type=1130 audit(1562048904.465:41): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.449915] audit: type=1130 audit(1562048904.466:42): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-convert comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.449917] audit: type=1131 audit(1562048904.466:43): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-convert comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.595713] systemd-journald[698]: File /run/log/journal/438268567d344828bc35023abe6425f6/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 5.605929] systemd-journald[698]: Received request to flush runtime journal from PID 1
[ 5.609820] systemd-journald[698]: File /var/log/journal/438268567d344828bc35023abe6425f6/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 5.744564] input: Intel HID events as /devices/platform/INT33D5:00/input/input9
[ 5.744862] intel-hid INT33D5:00: platform supports 5 button array
[ 5.744944] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input10
[ 5.765462] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 5.776036] IPMI message handler: version 39.2
[ 5.779240] ipmi device interface
[ 5.783440] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 5.784459] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 5.784529] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 5.785536] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 5.794224] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 5.799322] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 5.799324] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 5.799324] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 5.799324] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 5.799325] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 5.799325] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 5.806517] nvidia: loading out-of-tree module taints kernel.
[ 5.806528] nvidia: module license 'NVIDIA' taints kernel.
[ 5.806529] Disabling lock debugging due to kernel taint
[ 5.811096] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 5.817580] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[ 5.818957] nvidia-nvlink: Nvlink Core is being initialized, major device number 236
[ 5.824102] media: Linux media interface: v0.10
[ 5.827280] NVRM: The NVIDIA probe routine was not called for 1 device(s).
[ 5.827281] NVRM: This can occur when a driver such as:
NVRM: nouveau, rivafb, nvidiafb or rivatv
NVRM: was loaded and obtained ownership of the NVIDIA device(s).
[ 5.827281] NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
[ 5.827281] NVRM: No NVIDIA devices probed.
[ 5.827385] nvidia-nvlink: Unregistered the Nvlink Core, major device number 236
[ 5.834822] Bluetooth: Core ver 2.22
[ 5.834834] NET: Registered protocol family 31
[ 5.834835] Bluetooth: HCI device and connection manager initialized
[ 5.834838] Bluetooth: HCI socket layer initialized
[ 5.834839] Bluetooth: L2CAP socket layer initialized
[ 5.834842] Bluetooth: SCO socket layer initialized
[ 5.836469] cdc_acm 1-7:1.0: ttyACM0: USB ACM device
[ 5.836604] usbcore: registered new interface driver cdc_acm
[ 5.836605] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 5.848411] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.848703] videodev: Linux video capture interface: v2.00
[ 5.848994] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.857862] usbcore: registered new interface driver btusb
[ 5.875571] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5657)
[ 5.900020] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
[ 5.902713] uvcvideo 1-12:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized!
[ 5.902715] uvcvideo 1-12:1.0: Entity type for entity Extension 4 was not initialized!
[ 5.902716] uvcvideo 1-12:1.0: Entity type for entity Extension 7 was not initialized!
[ 5.902717] uvcvideo 1-12:1.0: Entity type for entity Processing 2 was not initialized!
[ 5.902718] uvcvideo 1-12:1.0: Entity type for entity Camera 1 was not initialized!
[ 5.902786] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/input/input11
[ 5.902849] usbcore: registered new interface driver uvcvideo
[ 5.902850] USB Video Class driver (1.1.1)
[ 5.977782] nvidia-nvlink: Nvlink Core is being initialized, major device number 236
[ 5.979646] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 5.981130] input: Dell WMI hotkeys as /devices/platform/PNP0C14:05/wmi_bus/wmi_bus-PNP0C14:05/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input12
[ 5.984143] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 5.985680] NVRM: The NVIDIA probe routine was not called for 1 device(s).
[ 5.985681] NVRM: This can occur when a driver such as:
NVRM: nouveau, rivafb, nvidiafb or rivatv
NVRM: was loaded and obtained ownership of the NVIDIA device(s).
[ 5.985681] NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
[ 5.985682] NVRM: No NVIDIA devices probed.
[ 5.985824] nvidia-nvlink: Unregistered the Nvlink Core, major device number 236
[ 6.028668] ath10k_pci 0000:3b:00.0: enabling device (0000 -> 0002)
[ 6.029824] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3266: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 6.029826] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.029827] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 6.029828] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 6.029829] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 6.029830] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x18
[ 6.029832] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 6.029833] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 6.036389] ath10k_pci 0000:3b:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 6.042790] iTCO_vendor_support: vendor-support=0
[ 6.043038] intel_rapl: Found RAPL domain package
[ 6.043039] intel_rapl: Found RAPL domain core
[ 6.043040] intel_rapl: Found RAPL domain uncore
[ 6.043041] intel_rapl: Found RAPL domain dram
[ 6.057486] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.057728] iTCO_wdt iTCO_wdt: can't request region for resource [mem 0x00c5fffc-0x00c5ffff]
[ 6.057732] iTCO_wdt: probe of iTCO_wdt failed with error -16
[ 6.070310] i2c_hid i2c-WCOM488F:00: i2c-WCOM488F:00 supply vdd not found, using dummy regulator
[ 6.070345] i2c_hid i2c-WCOM488F:00: i2c-WCOM488F:00 supply vddl not found, using dummy regulator
[ 6.098931] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 6.098987] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 6.099047] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 6.099102] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 6.099163] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 6.099214] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 6.117858] input: WCOM488F:00 056A:488F Touchscreen as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-23/i2c-WCOM488F:00/0018:056A:488F.0001/input/input19
[ 6.117972] input: WCOM488F:00 056A:488F as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-23/i2c-WCOM488F:00/0018:056A:488F.0001/input/input20
[ 6.118000] input: WCOM488F:00 056A:488F as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-23/i2c-WCOM488F:00/0018:056A:488F.0001/input/input21
[ 6.118044] input: WCOM488F:00 056A:488F as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-23/i2c-WCOM488F:00/0018:056A:488F.0001/input/input22
[ 6.118084] input: WCOM488F:00 056A:488F Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-23/i2c-WCOM488F:00/0018:056A:488F.0001/input/input23
[ 6.118191] hid-generic 0018:056A:488F.0001: input,hidraw0: I2C HID v1.00 Mouse [WCOM488F:00 056A:488F] on i2c-WCOM488F:00
[ 6.205800] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 6.206683] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 6.249622] ath10k_pci 0000:3b:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[ 6.249624] ath10k_pci 0000:3b:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[ 6.250010] ath10k_pci 0000:3b:00.0: firmware ver RM.4.4.1.c2-00057-QCARMSWP-1 api 6 features wowlan,ignore-otp,no-4addr-pad,raw-mode crc32 e061250a
[ 6.314542] ath10k_pci 0000:3b:00.0: board_file api 2 bmi_id N/A crc32 4ed3569e
[ 6.332060] i2c_hid i2c-SYNA2393:00: i2c-SYNA2393:00 supply vdd not found, using dummy regulator
[ 6.332072] i2c_hid i2c-SYNA2393:00: i2c-SYNA2393:00 supply vddl not found, using dummy regulator
[ 6.359949] input: SYNA2393:00 06CB:7A13 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-24/i2c-SYNA2393:00/0018:06CB:7A13.0002/input/input24
[ 6.360029] input: SYNA2393:00 06CB:7A13 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-24/i2c-SYNA2393:00/0018:06CB:7A13.0002/input/input25
[ 6.360083] hid-generic 0018:06CB:7A13.0002: input,hidraw1: I2C HID v1.00 Mouse [SYNA2393:00 06CB:7A13] on i2c-SYNA2393:00
[ 6.390924] ath10k_pci 0000:3b:00.0: unsupported HTC service id: 1536
[ 6.409333] ath10k_pci 0000:3b:00.0: htt-ver 3.56 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 6.475984] ath: EEPROM regdomain: 0x6c
[ 6.475985] ath: EEPROM indicates we should expect a direct regpair map
[ 6.475986] ath: Country alpha2 being used: 00
[ 6.475986] ath: Regpair used: 0x6c
[ 6.486267] ath10k_pci 0000:3b:00.0 wlp59s0: renamed from wlan0
[ 6.506743] input: SYNA2393:00 06CB:7A13 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-24/i2c-SYNA2393:00/0018:06CB:7A13.0002/input/input28
[ 6.510536] hid-multitouch 0018:06CB:7A13.0002: input,hidraw1: I2C HID v1.00 Mouse [SYNA2393:00 06CB:7A13] on i2c-SYNA2393:00
[ 6.583751] input: Wacom HID 488F Pen as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-23/i2c-WCOM488F:00/0018:056A:488F.0001/input/input30
[ 6.583908] input: Wacom HID 488F Finger as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-23/i2c-WCOM488F:00/0018:056A:488F.0001/input/input31
[ 6.584030] wacom 0018:056A:488F.0001: hidraw0: I2C HID v1.00 Mouse [WCOM488F:00 056A:488F] on i2c-WCOM488F:00
[ 6.745877] EXT4-fs (nvme0n1p7): mounted filesystem with ordered data mode. Opts: (null)
[ 6.748937] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.879680] RPC: Registered named UNIX socket transport module.
[ 6.879680] RPC: Registered udp transport module.
[ 6.879681] RPC: Registered tcp transport module.
[ 6.879681] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.983836] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.983837] Bluetooth: BNEP filters: protocol multicast
[ 6.983840] Bluetooth: BNEP socket layer initialized
[ 7.584094] ath10k_pci 0000:3b:00.0: unsupported HTC service id: 1536
[ 7.899503] ath10k_pci 0000:3b:00.0: unsupported HTC service id: 1536
[ 8.293857] L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details.
[ 8.728151] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 8.733948] tun: Universal TUN/TAP device driver, 1.6
[ 8.734649] virbr0: port 1(virbr0-nic) entered blocking state
[ 8.734651] virbr0: port 1(virbr0-nic) entered disabled state
[ 8.734700] device virbr0-nic entered promiscuous mode
[ 8.792485] virbr0: port 1(virbr0-nic) entered blocking state
[ 8.792487] virbr0: port 1(virbr0-nic) entered listening state
[ 8.825803] virbr0: port 1(virbr0-nic) entered disabled state
[ 12.729990] fbcon: Taking over console
[ 12.735344] Console: switching to colour frame buffer device 480x135
[ 14.855548] clocksource: timekeeping watchdog on CPU4: Marking clocksource 'tsc' as unstable because the skew is too large:
[ 14.855568] clocksource: 'hpet' wd_now: 148eb6a9 wd_last: 14098f3d mask: ffffffff
[ 14.855572] clocksource: 'tsc' cs_now: 14537cefc4 cs_last: 14125349b4 mask: ffffffffffffffff
[ 14.855581] tsc: Marking TSC unstable due to clocksource watchdog
[ 14.855606] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
[ 14.855608] sched_clock: Marking unstable (14854841506, 762441)<-(14888866261, -33261754)
[ 14.857379] clocksource: Switched to clocksource hpet
[ 24.361559] systemd-journald[698]: File /var/log/journal/438268567d344828bc35023abe6425f6/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 24.677393] Bluetooth: RFCOMM TTY layer initialized
[ 24.677396] Bluetooth: RFCOMM socket layer initialized
[ 24.677421] Bluetooth: RFCOMM ver 1.11
[ 93.359832] pci_raw_set_power_state: 26 callbacks suppressed
[ 93.359834] nouveau 0000:01:00.0: Refused to change power state, currently in D3
[ 93.650285] nvidia-nvlink: Nvlink Core is being initialized, major device number 236
[ 93.650864] NVRM: The NVIDIA probe routine was not called for 1 device(s).
[ 93.650865] NVRM: This can occur when a driver such as:
NVRM: nouveau, rivafb, nvidiafb or rivatv
NVRM: was loaded and obtained ownership of the NVIDIA device(s).
[ 93.650865] NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
[ 93.650865] NVRM: No NVIDIA devices probed.
[ 93.651440] nvidia-nvlink: Unregistered the Nvlink Core, major device number 236
[ 95.983674] nouveau 0000:01:00.0: secboot: error during falcon reset: -110
[ 95.983679] nouveau 0000:01:00.0: gr: init failed, -110
[ 96.934058] fuse init (API version 7.29)
[ 97.131957] nvidia-nvlink: Nvlink Core is being initialized, major device number 236
[ 97.132706] NVRM: The NVIDIA probe routine was not called for 1 device(s).
[ 97.132706] NVRM: This can occur when a driver such as:
NVRM: nouveau, rivafb, nvidiafb or rivatv
NVRM: was loaded and obtained ownership of the NVIDIA device(s).
[ 97.132706] NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
[ 97.132707] NVRM: No NVIDIA devices probed.
[ 97.133354] nvidia-nvlink: Unregistered the Nvlink Core, major device number 236
[ 99.031788] rfkill: input handler disabled
[ 99.079332] nvidia-nvlink: Nvlink Core is being initialized, major device number 236
[ 99.080420] NVRM: The NVIDIA probe routine was not called for 1 device(s).
[ 99.080421] NVRM: This can occur when a driver such as:
NVRM: nouveau, rivafb, nvidiafb or rivatv
NVRM: was loaded and obtained ownership of the NVIDIA device(s).
[ 99.080421] NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
[ 99.080422] NVRM: No NVIDIA devices probed.
[ 99.082479] nvidia-nvlink: Unregistered the Nvlink Core, major device number 236
[ 99.175356] nvidia-nvlink: Nvlink Core is being initialized, major device number 236
[ 99.177772] NVRM: The NVIDIA probe routine was not called for 1 device(s).
[ 99.177773] NVRM: This can occur when a driver such as:
NVRM: nouveau, rivafb, nvidiafb or rivatv
NVRM: was loaded and obtained ownership of the NVIDIA device(s).
[ 99.177773] NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
[ 99.177774] NVRM: No NVIDIA devices probed.
[ 99.178736] nvidia-nvlink: Unregistered the Nvlink Core, major device number 236
[ 100.280496] pciehp 0000:00:1b.0:pcie004: Slot(20): Card present
[ 100.280497] pciehp 0000:00:1b.0:pcie004: Slot(20): Link Up
[ 100.407292] pci 0000:02:00.0: [8086:15da] type 01 class 0x060400
[ 100.407471] pci 0000:02:00.0: enabling Extended Tags
[ 100.407669] pci 0000:02:00.0: supports D1 D2
[ 100.407670] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 100.407984] pci 0000:02:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 100.408094] pci 0000:03:00.0: [8086:15da] type 01 class 0x060400
[ 100.408350] pci 0000:03:00.0: enabling Extended Tags
[ 100.408631] pci 0000:03:00.0: supports D1 D2
[ 100.408632] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 100.408867] pci 0000:03:01.0: [8086:15da] type 01 class 0x060400
[ 100.409107] pci 0000:03:01.0: enabling Extended Tags
[ 100.409507] pci 0000:03:01.0: supports D1 D2
[ 100.409508] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 100.409896] pci 0000:03:02.0: [8086:15da] type 01 class 0x060400
[ 100.410324] pci 0000:03:02.0: enabling Extended Tags
[ 100.410784] pci 0000:03:02.0: supports D1 D2
[ 100.410785] pci 0000:03:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 100.411379] pci 0000:02:00.0: PCI bridge to [bus 03-3a]
[ 100.411390] pci 0000:02:00.0: bridge window [io 0x0000-0x0fff]
[ 100.411396] pci 0000:02:00.0: bridge window [mem 0x00000000-0x000fffff]
[ 100.411412] pci 0000:02:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 100.411422] pci 0000:03:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 100.411460] pci 0000:03:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 100.411507] pci 0000:03:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 100.411869] pci 0000:04:00.0: [8086:15d9] type 00 class 0x088000
[ 100.412066] pci 0000:04:00.0: reg 0x10: [mem 0x00000000-0x0003ffff]
[ 100.412112] pci 0000:04:00.0: reg 0x14: [mem 0x00000000-0x00000fff]
[ 100.412412] pci 0000:04:00.0: enabling Extended Tags
[ 100.412990] pci 0000:04:00.0: supports D1 D2
[ 100.412991] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 100.414027] pci 0000:03:00.0: PCI bridge to [bus 04-3a]
[ 100.414061] pci 0000:03:00.0: bridge window [io 0x0000-0x0fff]
[ 100.414074] pci 0000:03:00.0: bridge window [mem 0x00000000-0x000fffff]
[ 100.414109] pci 0000:03:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 100.414111] pci_bus 0000:04: busn_res: [bus 04-3a] end is updated to 04
[ 100.414481] pci 0000:03:01.0: PCI bridge to [bus 05-3a]
[ 100.414526] pci 0000:03:01.0: bridge window [io 0x0000-0x0fff]
[ 100.414548] pci 0000:03:01.0: bridge window [mem 0x00000000-0x000fffff]
[ 100.414593] pci 0000:03:01.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 100.414594] pci_bus 0000:05: busn_res: [bus 05-3a] end is updated to 39
[ 100.415018] pci 0000:3a:00.0: [8086:15db] type 00 class 0x0c0330
[ 100.415273] pci 0000:3a:00.0: reg 0x10: [mem 0x00000000-0x0000ffff]
[ 100.415669] pci 0000:3a:00.0: enabling Extended Tags
[ 100.416467] pci 0000:3a:00.0: supports D1 D2
[ 100.416469] pci 0000:3a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 100.416890] pci 0000:3a:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:03:02.0 (capable of 31.504 Gb/s with 8 GT/s x4 link)
[ 100.417578] pci 0000:03:02.0: PCI bridge to [bus 3a]
[ 100.417621] pci 0000:03:02.0: bridge window [io 0x0000-0x0fff]
[ 100.417643] pci 0000:03:02.0: bridge window [mem 0x00000000-0x000fffff]
[ 100.417688] pci 0000:03:02.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 100.417690] pci_bus 0000:3a: busn_res: [bus 3a] end is updated to 3a
[ 100.417711] pci_bus 0000:03: busn_res: [bus 03-3a] end is updated to 3a
[ 100.417736] pci 0000:03:01.0: bridge window [mem 0x00100000-0x001fffff 64bit pref] to [bus 05-39] add_size 100000 add_align 100000
[ 100.417737] pci 0000:03:01.0: bridge window [mem 0x00100000-0x001fffff] to [bus 05-39] add_size 100000 add_align 100000
[ 100.417739] pci 0000:02:00.0: bridge window [mem 0x00100000-0x003fffff 64bit pref] to [bus 03-3a] add_size 100000 add_align 100000
[ 100.417740] pci 0000:02:00.0: bridge window [mem 0x00100000-0x003fffff] to [bus 03-3a] add_size 100000 add_align 100000
[ 100.417744] pci 0000:02:00.0: BAR 14: assigned [mem 0xd4000000-0xea0fffff]
[ 100.417746] pci 0000:02:00.0: BAR 15: assigned [mem 0x90000000-0xb1ffffff 64bit pref]
[ 100.417746] pci 0000:02:00.0: BAR 13: no space for [io size 0x3000]
[ 100.417747] pci 0000:02:00.0: BAR 13: failed to assign [io size 0x3000]
[ 100.417748] pci 0000:02:00.0: BAR 13: no space for [io size 0x3000]
[ 100.417749] pci 0000:02:00.0: BAR 13: failed to assign [io size 0x3000]
[ 100.417751] pci 0000:03:00.0: BAR 14: assigned [mem 0xd4000000-0xd40fffff]
[ 100.417752] pci 0000:03:00.0: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref]
[ 100.417753] pci 0000:03:01.0: BAR 14: assigned [mem 0xd4100000-0xe9ffffff]
[ 100.417754] pci 0000:03:01.0: BAR 15: assigned [mem 0x90100000-0xb1efffff 64bit pref]
[ 100.417755] pci 0000:03:02.0: BAR 14: assigned [mem 0xea000000-0xea0fffff]
[ 100.417755] pci 0000:03:02.0: BAR 15: assigned [mem 0xb1f00000-0xb1ffffff 64bit pref]
[ 100.417756] pci 0000:03:00.0: BAR 13: no space for [io size 0x1000]
[ 100.417757] pci 0000:03:00.0: BAR 13: failed to assign [io size 0x1000]
[ 100.417757] pci 0000:03:01.0: BAR 13: no space for [io size 0x1000]
[ 100.417758] pci 0000:03:01.0: BAR 13: failed to assign [io size 0x1000]
[ 100.417758] pci 0000:03:02.0: BAR 13: no space for [io size 0x1000]
[ 100.417759] pci 0000:03:02.0: BAR 13: failed to assign [io size 0x1000]
[ 100.417760] pci 0000:03:00.0: BAR 13: no space for [io size 0x1000]
[ 100.417760] pci 0000:03:00.0: BAR 13: failed to assign [io size 0x1000]
[ 100.417761] pci 0000:03:01.0: BAR 13: no space for [io size 0x1000]
[ 100.417761] pci 0000:03:01.0: BAR 13: failed to assign [io size 0x1000]
[ 100.417762] pci 0000:03:02.0: BAR 13: no space for [io size 0x1000]
[ 100.417762] pci 0000:03:02.0: BAR 13: failed to assign [io size 0x1000]
[ 100.417764] pci 0000:04:00.0: BAR 0: assigned [mem 0xd4000000-0xd403ffff]
[ 100.417779] pci 0000:04:00.0: BAR 1: assigned [mem 0xd4040000-0xd4040fff]
[ 100.417802] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 100.417826] pci 0000:03:00.0: bridge window [mem 0xd4000000-0xd40fffff]
[ 100.417831] pci 0000:03:00.0: bridge window [mem 0x90000000-0x900fffff 64bit pref]
[ 100.417840] pci 0000:03:01.0: PCI bridge to [bus 05-39]
[ 100.417848] pci 0000:03:01.0: bridge window [mem 0xd4100000-0xe9ffffff]
[ 100.417853] pci 0000:03:01.0: bridge window [mem 0x90100000-0xb1efffff 64bit pref]
[ 100.417863] pci 0000:3a:00.0: BAR 0: assigned [mem 0xea000000-0xea00ffff]
[ 100.417869] pci 0000:03:02.0: PCI bridge to [bus 3a]
[ 100.417876] pci 0000:03:02.0: bridge window [mem 0xea000000-0xea0fffff]
[ 100.417881] pci 0000:03:02.0: bridge window [mem 0xb1f00000-0xb1ffffff 64bit pref]
[ 100.417890] pci 0000:02:00.0: PCI bridge to [bus 03-3a]
[ 100.417913] pci 0000:02:00.0: bridge window [mem 0xd4000000-0xea0fffff]
[ 100.417918] pci 0000:02:00.0: bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
[ 100.417928] pcieport 0000:00:1b.0: PCI bridge to [bus 02-3a]
[ 100.417931] pcieport 0000:00:1b.0: bridge window [io 0x5000-0x5fff]
[ 100.417938] pcieport 0000:00:1b.0: bridge window [mem 0xd4000000-0xea0fffff]
[ 100.417943] pcieport 0000:00:1b.0: bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
[ 100.417959] PCI: No. 2 try to assign unassigned res
[ 100.417961] pcieport 0000:00:1b.0: resource 13 [io 0x5000-0x5fff] released
[ 100.417962] pcieport 0000:00:1b.0: PCI bridge to [bus 02-3a]
[ 100.418006] pcieport 0000:00:1b.0: BAR 13: assigned [io 0x5000-0x7fff]
[ 100.418007] pci 0000:02:00.0: BAR 13: assigned [io 0x5000-0x7fff]
[ 100.418008] pci 0000:03:00.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 100.418009] pci 0000:03:01.0: BAR 13: assigned [io 0x6000-0x6fff]
[ 100.418010] pci 0000:03:02.0: BAR 13: assigned [io 0x7000-0x7fff]
[ 100.418010] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 100.418015] pci 0000:03:00.0: bridge window [io 0x5000-0x5fff]
[ 100.418040] pci 0000:03:00.0: bridge window [mem 0xd4000000-0xd40fffff]
[ 100.418063] pci 0000:03:00.0: bridge window [mem 0x90000000-0x900fffff 64bit pref]
[ 100.418109] pci 0000:03:01.0: PCI bridge to [bus 05-39]
[ 100.418119] pci 0000:03:01.0: bridge window [io 0x6000-0x6fff]
[ 100.418200] pci 0000:03:01.0: bridge window [mem 0xd4100000-0xe9ffffff]
[ 100.418222] pci 0000:03:01.0: bridge window [mem 0x90100000-0xb1efffff 64bit pref]
[ 100.418268] pci 0000:03:02.0: PCI bridge to [bus 3a]
[ 100.418278] pci 0000:03:02.0: bridge window [io 0x7000-0x7fff]
[ 100.418312] pci 0000:03:02.0: bridge window [mem 0xea000000-0xea0fffff]
[ 100.418335] pci 0000:03:02.0: bridge window [mem 0xb1f00000-0xb1ffffff 64bit pref]
[ 100.418380] pci 0000:02:00.0: PCI bridge to [bus 03-3a]
[ 100.418391] pci 0000:02:00.0: bridge window [io 0x5000-0x7fff]
[ 100.418425] pci 0000:02:00.0: bridge window [mem 0xd4000000-0xea0fffff]
[ 100.418448] pci 0000:02:00.0: bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
[ 100.418484] pcieport 0000:00:1b.0: PCI bridge to [bus 02-3a]
[ 100.418493] pcieport 0000:00:1b.0: bridge window [io 0x5000-0x7fff]
[ 100.418507] pcieport 0000:00:1b.0: bridge window [mem 0xd4000000-0xea0fffff]
[ 100.418518] pcieport 0000:00:1b.0: bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
[ 100.418622] pcieport 0000:02:00.0: enabling device (0000 -> 0003)
[ 100.419590] pcieport 0000:03:00.0: enabling device (0000 -> 0003)
[ 100.420685] pcieport 0000:03:01.0: enabling device (0000 -> 0003)
[ 100.421190] pciehp 0000:03:01.0:pcie204: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 100.422366] pcieport 0000:03:02.0: enabling device (0000 -> 0003)
[ 100.423249] pci 0000:3a:00.0: enabling device (0000 -> 0002)
[ 100.423743] xhci_hcd 0000:3a:00.0: xHCI Host Controller
[ 100.424247] xhci_hcd 0000:3a:00.0: new USB bus registered, assigned bus number 3
[ 100.426023] xhci_hcd 0000:3a:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[ 100.427208] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[ 100.427209] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 100.427210] usb usb3: Product: xHCI Host Controller
[ 100.427211] usb usb3: Manufacturer: Linux 5.1.12-300.fc30.x86_64 xhci-hcd
[ 100.427212] usb usb3: SerialNumber: 0000:3a:00.0
[ 100.427488] hub 3-0:1.0: USB hub found
[ 100.427515] hub 3-0:1.0: 2 ports detected
[ 100.428238] xhci_hcd 0000:3a:00.0: xHCI Host Controller
[ 100.428426] xhci_hcd 0000:3a:00.0: new USB bus registered, assigned bus number 4
[ 100.428428] xhci_hcd 0000:3a:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 100.428507] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01
[ 100.428508] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 100.428508] usb usb4: Product: xHCI Host Controller
[ 100.428509] usb usb4: Manufacturer: Linux 5.1.12-300.fc30.x86_64 xhci-hcd
[ 100.428510] usb usb4: SerialNumber: 0000:3a:00.0
[ 100.428754] hub 4-0:1.0: USB hub found
[ 100.428781] hub 4-0:1.0: 2 ports detected
[ 100.429084] thunderbolt 0000:04:00.0: enabling device (0000 -> 0002)
[ 103.449745] pcieport 0000:00:1b.0: PCI bridge to [bus 02-3a]
[ 103.449749] pcieport 0000:00:1b.0: bridge window [io 0x5000-0x7fff]
[ 103.449757] pcieport 0000:00:1b.0: bridge window [mem 0xd4000000-0xea0fffff]
[ 103.449762] pcieport 0000:00:1b.0: bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
[ 142.057856] pciehp 0000:00:1b.0:pcie004: Slot(20): Link Down
[ 142.057857] pciehp 0000:00:1b.0:pcie004: Slot(20): Card not present
[ 142.057867] pcieport 0000:03:02.0: Refused to change power state, currently in D3
[ 142.058225] xhci_hcd 0000:3a:00.0: Refused to change power state, currently in D3
[ 142.130297] xhci_hcd 0000:3a:00.0: Refused to change power state, currently in D3
[ 142.130355] xhci_hcd 0000:3a:00.0: WARN: xHC restore state timeout
[ 142.130358] xhci_hcd 0000:3a:00.0: PCI post-resume error -110!
[ 142.130360] xhci_hcd 0000:3a:00.0: HC died; cleaning up
[ 142.130424] xhci_hcd 0000:3a:00.0: remove, state 4
[ 142.130460] usb usb4: USB disconnect, device number 1
[ 142.131609] xhci_hcd 0000:3a:00.0: USB bus 4 deregistered
[ 142.131899] xhci_hcd 0000:3a:00.0: remove, state 4
[ 142.131929] usb usb3: USB disconnect, device number 1
[ 142.133082] xhci_hcd 0000:3a:00.0: Host halt failed, -19
[ 142.133095] xhci_hcd 0000:3a:00.0: Host not accessible, reset failed.
[ 142.133273] xhci_hcd 0000:3a:00.0: USB bus 3 deregistered
[ 142.133898] pcieport 0000:03:01.0: Refused to change power state, currently in D3
[ 142.635676] pci_bus 0000:04: busn_res: [bus 04] is released
[ 142.636387] pci_bus 0000:05: busn_res: [bus 05-39] is released
[ 142.637593] pci_bus 0000:3a: busn_res: [bus 3a] is released
[ 142.638258] pci_bus 0000:03: busn_res: [bus 03-3a] is released
[ 273.345569] wlp59s0: authenticate with 00:96:c7:47:0c:13
[ 273.401411] wlp59s0: send auth to 00:96:c7:47:0c:13 (try 1/3)
[ 273.403124] wlp59s0: authenticated
[ 273.404350] wlp59s0: associate with 00:96:c7:47:0c:13 (try 1/3)
[ 273.408090] wlp59s0: RX AssocResp from 00:96:c7:47:0c:13 (capab=0x411 status=0 aid=1)
[ 273.411567] wlp59s0: associated
[ 273.495392] IPv6: ADDRCONF(NETDEV_CHANGE): wlp59s0: link becomes ready
[ 1034.590329] SELinux: Converting 2479 SID table entries...
[ 1035.883350] SELinux: policy capability network_peer_controls=1
[ 1035.883351] SELinux: policy capability open_perms=1
[ 1035.883351] SELinux: policy capability extended_socket_class=1
[ 1035.883351] SELinux: policy capability always_check_network=0
[ 1035.883352] SELinux: policy capability cgroup_seclabel=1
[ 1035.883352] SELinux: policy capability nnp_nosuid_transition=1
[ 1095.163736] pciehp 0000:00:1b.0:pcie004: Slot(20): Card present
[ 1095.163737] pciehp 0000:00:1b.0:pcie004: Slot(20): Link Up
[ 1095.287380] pci 0000:02:00.0: [8086:15da] type 01 class 0x060400
[ 1095.287561] pci 0000:02:00.0: enabling Extended Tags
[ 1095.287853] pci 0000:02:00.0: supports D1 D2
[ 1095.287855] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1095.288382] pci 0000:02:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1095.288611] pci 0000:03:00.0: [8086:15da] type 01 class 0x060400
[ 1095.288858] pci 0000:03:00.0: enabling Extended Tags
[ 1095.289323] pci 0000:03:00.0: supports D1 D2
[ 1095.289326] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1095.289805] pci 0000:03:01.0: [8086:15da] type 01 class 0x060400
[ 1095.290054] pci 0000:03:01.0: enabling Extended Tags
[ 1095.290420] pci 0000:03:01.0: supports D1 D2
[ 1095.290422] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1095.290730] pci 0000:03:02.0: [8086:15da] type 01 class 0x060400
[ 1095.290910] pci 0000:03:02.0: enabling Extended Tags
[ 1095.291255] pci 0000:03:02.0: supports D1 D2
[ 1095.291257] pci 0000:03:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1095.291651] pci 0000:02:00.0: PCI bridge to [bus 03-3a]
[ 1095.291667] pci 0000:02:00.0: bridge window [io 0x0000-0x0fff]
[ 1095.291676] pci 0000:02:00.0: bridge window [mem 0x00000000-0x000fffff]
[ 1095.291690] pci 0000:02:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 1095.291697] pci 0000:03:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1095.291714] pci 0000:03:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1095.291731] pci 0000:03:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1095.291996] pci 0000:04:00.0: [8086:15d9] type 00 class 0x088000
[ 1095.292085] pci 0000:04:00.0: reg 0x10: [mem 0x00000000-0x0003ffff]
[ 1095.292102] pci 0000:04:00.0: reg 0x14: [mem 0x00000000-0x00000fff]
[ 1095.292332] pci 0000:04:00.0: enabling Extended Tags
[ 1095.292611] pci 0000:04:00.0: supports D1 D2
[ 1095.292614] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1095.293127] pci 0000:03:00.0: PCI bridge to [bus 04-3a]
[ 1095.293235] pci 0000:03:00.0: bridge window [io 0x0000-0x0fff]
[ 1095.293245] pci 0000:03:00.0: bridge window [mem 0x00000000-0x000fffff]
[ 1095.293268] pci 0000:03:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 1095.293274] pci_bus 0000:04: busn_res: [bus 04-3a] end is updated to 04
[ 1095.293583] pci 0000:03:01.0: PCI bridge to [bus 05-3a]
[ 1095.293618] pci 0000:03:01.0: bridge window [io 0x0000-0x0fff]
[ 1095.293640] pci 0000:03:01.0: bridge window [mem 0x00000000-0x000fffff]
[ 1095.293675] pci 0000:03:01.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 1095.293681] pci_bus 0000:05: busn_res: [bus 05-3a] end is updated to 39
[ 1095.294014] pci 0000:3a:00.0: [8086:15db] type 00 class 0x0c0330
[ 1095.294250] pci 0000:3a:00.0: reg 0x10: [mem 0x00000000-0x0000ffff]
[ 1095.294930] pci 0000:3a:00.0: supports D1 D2
[ 1095.294933] pci 0000:3a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1095.295279] pci 0000:3a:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:03:02.0 (capable of 31.504 Gb/s with 8 GT/s x4 link)
[ 1095.295620] pci 0000:03:02.0: PCI bridge to [bus 3a]
[ 1095.295635] pci 0000:03:02.0: bridge window [io 0x0000-0x0fff]
[ 1095.295643] pci 0000:03:02.0: bridge window [mem 0x00000000-0x000fffff]
[ 1095.295657] pci 0000:03:02.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 1095.295661] pci_bus 0000:3a: busn_res: [bus 3a] end is updated to 3a
[ 1095.295675] pci_bus 0000:03: busn_res: [bus 03-3a] end is updated to 3a
[ 1095.295690] pci 0000:03:01.0: bridge window [mem 0x00100000-0x001fffff 64bit pref] to [bus 05-39] add_size 100000 add_align 100000
[ 1095.295694] pci 0000:03:01.0: bridge window [mem 0x00100000-0x001fffff] to [bus 05-39] add_size 100000 add_align 100000
[ 1095.295700] pci 0000:02:00.0: bridge window [mem 0x00100000-0x003fffff 64bit pref] to [bus 03-3a] add_size 100000 add_align 100000
[ 1095.295704] pci 0000:02:00.0: bridge window [mem 0x00100000-0x003fffff] to [bus 03-3a] add_size 100000 add_align 100000
[ 1095.295718] pci 0000:02:00.0: BAR 14: assigned [mem 0xd4000000-0xea0fffff]
[ 1095.295723] pci 0000:02:00.0: BAR 15: assigned [mem 0x90000000-0xb1ffffff 64bit pref]
[ 1095.295726] pci 0000:02:00.0: BAR 13: assigned [io 0x5000-0x7fff]
[ 1095.295735] pci 0000:03:00.0: BAR 14: assigned [mem 0xd4000000-0xd40fffff]
[ 1095.295740] pci 0000:03:00.0: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref]
[ 1095.295743] pci 0000:03:01.0: BAR 14: assigned [mem 0xd4100000-0xe9ffffff]
[ 1095.295747] pci 0000:03:01.0: BAR 15: assigned [mem 0x90100000-0xb1efffff 64bit pref]
[ 1095.295750] pci 0000:03:02.0: BAR 14: assigned [mem 0xea000000-0xea0fffff]
[ 1095.295754] pci 0000:03:02.0: BAR 15: assigned [mem 0xb1f00000-0xb1ffffff 64bit pref]
[ 1095.295756] pci 0000:03:00.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 1095.295759] pci 0000:03:01.0: BAR 13: assigned [io 0x6000-0x6fff]
[ 1095.295761] pci 0000:03:02.0: BAR 13: assigned [io 0x7000-0x7fff]
[ 1095.295767] pci 0000:04:00.0: BAR 0: assigned [mem 0xd4000000-0xd403ffff]
[ 1095.295781] pci 0000:04:00.0: BAR 1: assigned [mem 0xd4040000-0xd4040fff]
[ 1095.295790] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 1095.295795] pci 0000:03:00.0: bridge window [io 0x5000-0x5fff]
[ 1095.295807] pci 0000:03:00.0: bridge window [mem 0xd4000000-0xd40fffff]
[ 1095.295815] pci 0000:03:00.0: bridge window [mem 0x90000000-0x900fffff 64bit pref]
[ 1095.295829] pci 0000:03:01.0: PCI bridge to [bus 05-39]
[ 1095.295834] pci 0000:03:01.0: bridge window [io 0x6000-0x6fff]
[ 1095.295844] pci 0000:03:01.0: bridge window [mem 0xd4100000-0xe9ffffff]
[ 1095.295852] pci 0000:03:01.0: bridge window [mem 0x90100000-0xb1efffff 64bit pref]
[ 1095.295867] pci 0000:3a:00.0: BAR 0: assigned [mem 0xea000000-0xea00ffff]
[ 1095.295876] pci 0000:03:02.0: PCI bridge to [bus 3a]
[ 1095.295881] pci 0000:03:02.0: bridge window [io 0x7000-0x7fff]
[ 1095.295891] pci 0000:03:02.0: bridge window [mem 0xea000000-0xea0fffff]
[ 1095.295899] pci 0000:03:02.0: bridge window [mem 0xb1f00000-0xb1ffffff 64bit pref]
[ 1095.295913] pci 0000:02:00.0: PCI bridge to [bus 03-3a]
[ 1095.295918] pci 0000:02:00.0: bridge window [io 0x5000-0x7fff]
[ 1095.295929] pci 0000:02:00.0: bridge window [mem 0xd4000000-0xea0fffff]
[ 1095.295937] pci 0000:02:00.0: bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
[ 1095.295951] pcieport 0000:00:1b.0: PCI bridge to [bus 02-3a]
[ 1095.295956] pcieport 0000:00:1b.0: bridge window [io 0x5000-0x7fff]
[ 1095.295966] pcieport 0000:00:1b.0: bridge window [mem 0xd4000000-0xea0fffff]
[ 1095.295974] pcieport 0000:00:1b.0: bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
[ 1095.296091] pcieport 0000:02:00.0: enabling device (0000 -> 0003)
[ 1095.296615] pcieport 0000:03:00.0: enabling device (0000 -> 0003)
[ 1095.297366] pcieport 0000:03:01.0: enabling device (0000 -> 0003)
[ 1095.297725] pciehp 0000:03:01.0:pcie204: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 1095.298488] pcieport 0000:03:02.0: enabling device (0000 -> 0003)
[ 1095.299113] thunderbolt 0000:04:00.0: enabling device (0000 -> 0002)
[ 1095.437716] pci 0000:3a:00.0: enabling device (0000 -> 0002)
[ 1095.438232] xhci_hcd 0000:3a:00.0: xHCI Host Controller
[ 1095.438673] xhci_hcd 0000:3a:00.0: new USB bus registered, assigned bus number 3
[ 1095.440129] xhci_hcd 0000:3a:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[ 1095.440794] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[ 1095.440796] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1095.440797] usb usb3: Product: xHCI Host Controller
[ 1095.440798] usb usb3: Manufacturer: Linux 5.1.12-300.fc30.x86_64 xhci-hcd
[ 1095.440799] usb usb3: SerialNumber: 0000:3a:00.0
[ 1095.441100] hub 3-0:1.0: USB hub found
[ 1095.441128] hub 3-0:1.0: 2 ports detected
[ 1095.441634] xhci_hcd 0000:3a:00.0: xHCI Host Controller
[ 1095.441789] xhci_hcd 0000:3a:00.0: new USB bus registered, assigned bus number 4
[ 1095.441792] xhci_hcd 0000:3a:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 1095.441878] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01
[ 1095.441879] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1095.441880] usb usb4: Product: xHCI Host Controller
[ 1095.441881] usb usb4: Manufacturer: Linux 5.1.12-300.fc30.x86_64 xhci-hcd
[ 1095.441882] usb usb4: SerialNumber: 0000:3a:00.0
[ 1095.442120] hub 4-0:1.0: USB hub found
[ 1095.442138] hub 4-0:1.0: 2 ports detected
[ 1097.562707] pcieport 0000:00:1b.0: PCI bridge to [bus 02-3a]
[ 1097.562715] pcieport 0000:00:1b.0: bridge window [io 0x5000-0x7fff]
[ 1097.562723] pcieport 0000:00:1b.0: bridge window [mem 0xd4000000-0xea0fffff]
[ 1097.562735] pcieport 0000:00:1b.0: bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
[ 1115.673513] pciehp 0000:00:1b.0:pcie004: Slot(20): Link Down
[ 1115.673514] pciehp 0000:00:1b.0:pcie004: Slot(20): Card not present
[ 1115.673520] pcieport 0000:03:02.0: Refused to change power state, currently in D3
[ 1115.676106] xhci_hcd 0000:3a:00.0: Refused to change power state, currently in D3
[ 1115.748205] xhci_hcd 0000:3a:00.0: Refused to change power state, currently in D3
[ 1115.748242] xhci_hcd 0000:3a:00.0: WARN: xHC restore state timeout
[ 1115.748243] xhci_hcd 0000:3a:00.0: PCI post-resume error -110!
[ 1115.748244] xhci_hcd 0000:3a:00.0: HC died; cleaning up
[ 1115.748297] xhci_hcd 0000:3a:00.0: remove, state 4
[ 1115.748321] usb usb4: USB disconnect, device number 1
[ 1115.749350] xhci_hcd 0000:3a:00.0: USB bus 4 deregistered
[ 1115.749486] xhci_hcd 0000:3a:00.0: remove, state 4
[ 1115.749512] usb usb3: USB disconnect, device number 1
[ 1115.750461] xhci_hcd 0000:3a:00.0: Host halt failed, -19
[ 1115.750464] xhci_hcd 0000:3a:00.0: Host not accessible, reset failed.
[ 1115.750547] xhci_hcd 0000:3a:00.0: USB bus 3 deregistered
[ 1115.750997] pcieport 0000:03:01.0: Refused to change power state, currently in D3
[ 1115.755577] systemd-system-update-generator[29218]: Offline system update overridden by runlevel "3" on the kernel command line
[ 1116.252663] pci_bus 0000:04: busn_res: [bus 04] is released
[ 1116.253262] pci_bus 0000:05: busn_res: [bus 05-39] is released
[ 1116.254420] pci_bus 0000:3a: busn_res: [bus 3a] is released
[ 1116.255073] pci_bus 0000:03: busn_res: [bus 03-3a] is released
[ 1121.540929] mce: CPU11: Core temperature above threshold, cpu clock throttled (total events = 1)
[ 1121.540930] mce: CPU5: Core temperature above threshold, cpu clock throttled (total events = 1)
[ 1121.540931] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 1121.540932] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 1121.540933] mce: CPU10: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 1121.540934] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 1121.540936] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 1121.540936] mce: CPU8: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 1121.540937] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 1121.540938] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 1121.540939] mce: CPU9: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 1121.540940] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 1121.540942] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 1121.540947] mce: CPU11: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 1121.541921] mce: CPU5: Core temperature/speed normal
[ 1121.541922] mce: CPU11: Core temperature/speed normal
[ 1121.541923] mce: CPU9: Package temperature/speed normal
[ 1121.541923] mce: CPU8: Package temperature/speed normal
[ 1121.541924] mce: CPU3: Package temperature/speed normal
[ 1121.541925] mce: CPU0: Package temperature/speed normal
[ 1121.541925] mce: CPU6: Package temperature/speed normal
[ 1121.541926] mce: CPU10: Package temperature/speed normal
[ 1121.541927] mce: CPU4: Package temperature/speed normal
[ 1121.541928] mce: CPU11: Package temperature/speed normal
[ 1121.541930] mce: CPU7: Package temperature/speed normal
[ 1121.541930] mce: CPU5: Package temperature/speed normal
[ 1121.541931] mce: CPU1: Package temperature/speed normal
[ 1121.541951] mce: CPU2: Package temperature/speed normal
[ 1200.128341] perf: interrupt took too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[ 1572.846019] perf: interrupt took too long (3156 > 3138), lowering kernel.perf_event_max_sample_rate to 63000
[ 1777.244132] perf: interrupt took too long (4050 > 3945), lowering kernel.perf_event_max_sample_rate to 49000
[ 2315.697638] perf: interrupt took too long (5092 > 5062), lowering kernel.perf_event_max_sample_rate to 39000
[ 2649.093515] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.PEG0.PEGP.BRT6.LCD], AE_NOT_FOUND (20190215/psargs-330)
[ 2649.093521] ACPI Error: Aborting method \_SB.PCI0.PEG0.PEGP.BRT6 due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 2649.093791] ACPI Error: Aborting method \EV5 due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 2649.094016] ACPI Error: Aborting method \SMEE due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 2649.094246] ACPI Error: Aborting method \SMIE due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 2649.094516] ACPI Error: Aborting method \NEVT due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 2649.094695] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 2649.321709] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.PEG0.PEGP.BRT6.LCD], AE_NOT_FOUND (20190215/psargs-330)
[ 2649.321714] ACPI Error: Aborting method \_SB.PCI0.PEG0.PEGP.BRT6 due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 2649.321997] ACPI Error: Aborting method \EV5 due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 2649.322176] ACPI Error: Aborting method \SMEE due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 2649.323025] ACPI Error: Aborting method \SMIE due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 2649.323201] ACPI Error: Aborting method \NEVT due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 2649.323667] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3185.090298] perf: interrupt took too long (6436 > 6365), lowering kernel.perf_event_max_sample_rate to 31000
[ 3875.015457] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.PEG0.PEGP.BRT6.LCD], AE_NOT_FOUND (20190215/psargs-330)
[ 3875.015472] ACPI Error: Aborting method \_SB.PCI0.PEG0.PEGP.BRT6 due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3875.016410] ACPI Error: Aborting method \EV5 due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3875.016857] ACPI Error: Aborting method \SMEE due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3875.017129] ACPI Error: Aborting method \SMIE due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3875.017487] ACPI Error: Aborting method \NEVT due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3875.017932] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3875.407410] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.PEG0.PEGP.BRT6.LCD], AE_NOT_FOUND (20190215/psargs-330)
[ 3875.407423] ACPI Error: Aborting method \_SB.PCI0.PEG0.PEGP.BRT6 due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3875.407950] ACPI Error: Aborting method \EV5 due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3875.408536] ACPI Error: Aborting method \SMEE due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3875.409002] ACPI Error: Aborting method \SMIE due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3875.409517] ACPI Error: Aborting method \NEVT due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3875.409952] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3875.767824] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.PEG0.PEGP.BRT6.LCD], AE_NOT_FOUND (20190215/psargs-330)
[ 3875.767841] ACPI Error: Aborting method \_SB.PCI0.PEG0.PEGP.BRT6 due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3875.768297] ACPI Error: Aborting method \EV5 due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3875.768739] ACPI Error: Aborting method \SMEE due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3875.769314] ACPI Error: Aborting method \SMIE due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3875.769698] ACPI Error: Aborting method \NEVT due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3875.770034] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3876.070753] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.PEG0.PEGP.BRT6.LCD], AE_NOT_FOUND (20190215/psargs-330)
[ 3876.070771] ACPI Error: Aborting method \_SB.PCI0.PEG0.PEGP.BRT6 due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3876.071288] ACPI Error: Aborting method \EV5 due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3876.071642] ACPI Error: Aborting method \SMEE due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3876.071947] ACPI Error: Aborting method \SMIE due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3876.072190] ACPI Error: Aborting method \NEVT due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3876.072521] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3876.307131] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.PEG0.PEGP.BRT6.LCD], AE_NOT_FOUND (20190215/psargs-330)
[ 3876.307216] ACPI Error: Aborting method \_SB.PCI0.PEG0.PEGP.BRT6 due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3876.307807] ACPI Error: Aborting method \EV5 due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3876.308201] ACPI Error: Aborting method \SMEE due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3876.308718] ACPI Error: Aborting method \SMIE due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3876.309272] ACPI Error: Aborting method \NEVT due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3876.309683] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3876.648302] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.PEG0.PEGP.BRT6.LCD], AE_NOT_FOUND (20190215/psargs-330)
[ 3876.648327] ACPI Error: Aborting method \_SB.PCI0.PEG0.PEGP.BRT6 due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3876.648664] ACPI Error: Aborting method \EV5 due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3876.648996] ACPI Error: Aborting method \SMEE due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3876.649379] ACPI Error: Aborting method \SMIE due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3876.649952] ACPI Error: Aborting method \NEVT due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 3876.650300] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_NOT_FOUND) (20190215/psparse-529)
[ 4709.131239] perf: interrupt took too long (8141 > 8045), lowering kernel.perf_event_max_sample_rate to 24000
[ 6054.740319] perf: interrupt took too long (10189 > 10176), lowering kernel.perf_event_max_sample_rate to 19000
[ 6990.565681] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=1103 end=1104) time 146 us, min 2146, max 2159, scanline start 2143, end 2160
[ 7208.302017] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=162 end=163) time 133 us, min 2146, max 2159, scanline start 2143, end 2163
Merci pour vos retours.