Bonjour,

Suite à un erreur récurrente de démarrage apparemment sans conséquence, j'ai consulté le boot.log
cat /var/log/boot.log
qui me renvoient pas moins de 21791 lignes qui semblent OK. Est ce le cumul de tous les boots? Ça me semble bizarre autant de lignes...

La commande dmesg n'est pas en reste avec ses 856 lignes que je vous mets ici si quelqu'un veut bien jeter un coup d'oeil rapide,
qui pourrait m'éclairer sur quelque chose d'important car je n'ai malheureusement pas d'expertise dans ce domaine.

Je vous remercie par avance.
dmesg
[    0.000000] microcode: microcode updated early to revision 0x2e, date = 2018-04-10
[    0.000000] Linux version 4.18.11-200.fc28.x86_64 (mockbuild@bkernel04.phx2.fedoraproject.org) (gcc version 8.1.1 20180712 (Red Hat 8.1.1-5) (GCC)) #1 SMP Sun Sep 30 15:31:40 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.18.11-200.fc28.x86_64 root=/dev/mapper/fedora-root ro resume=/dev/mapper/fedora-swap rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=fr_FR.UTF-8
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000b6c72fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b6c73000-0x00000000b6cb9fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b6cba000-0x00000000b6cc1fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000b6cc2000-0x00000000b6dfdfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b6dfe000-0x00000000b6dfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b6e00000-0x00000000b6e0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b6e10000-0x00000000b6e1cfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b6e1d000-0x00000000b6e40fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b6e41000-0x00000000b6e83fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b6e84000-0x00000000b6ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b7800000-0x00000000bf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: MICRO-STAR INTERNATIONAL CO., LTD MS-AC73/MS-AC73, BIOS V1.40 11/04/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x23fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask FC0000000 write-back
[    0.000000]   2 base 0B7800000 mask FFF800000 uncachable
[    0.000000]   3 base 0B8000000 mask FF8000000 uncachable
[    0.000000]   4 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   5 base 23FE00000 mask FFFE00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: update [mem 0xb7800000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xb7000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcdd0-0x000fcddf] mapped at [(____ptrval____)]
[    0.000000] Base memory trampoline at [(____ptrval____)] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x167aaa000, 0x167aaafff] PGTABLE
[    0.000000] BRK [0x167aab000, 0x167aabfff] PGTABLE
[    0.000000] BRK [0x167aac000, 0x167aacfff] PGTABLE
[    0.000000] BRK [0x167aad000, 0x167aadfff] PGTABLE
[    0.000000] BRK [0x167aae000, 0x167aaefff] PGTABLE
[    0.000000] BRK [0x167aaf000, 0x167aaffff] PGTABLE
[    0.000000] BRK [0x167ab0000, 0x167ab0fff] PGTABLE
[    0.000000] BRK [0x167ab1000, 0x167ab1fff] PGTABLE
[    0.000000] BRK [0x167ab2000, 0x167ab2fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x352fb000-0x36975fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 MSI_NB)
[    0.000000] ACPI: XSDT 0x00000000B6CBA068 000054 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000B6CC1768 0000F4 (v04 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000B6CBA150 007616 (v02 MSI_NB MEGABOOK 00000016 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000B6E14F80 000040
[    0.000000] ACPI: APIC 0x00000000B6CC1860 000062 (v03 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000B6CC18C8 000098 (v01 AMICPU PROC     00000001 MSFT 03000001)
[    0.000000] ACPI: MCFG 0x00000000B6CC1960 00003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
[    0.000000] ACPI: SLIC 0x00000000B6CC19A0 000176 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: HPET 0x00000000B6CC1B18 000038 (v01 MSI_NB MEGABOOK 01072009 AMI. 00000004)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x23fdd1000-0x23fdfbfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000023fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000b6c72fff]
[    0.000000]   node   0: [mem 0x00000000b6dfe000-0x00000000b6dfffff]
[    0.000000]   node   0: [mem 0x00000000b6e84000-0x00000000b6ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000023fdfffff]
[    0.000000] Reserved but unavailable: 5747 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fdfffff]
[    0.000000] On node 0 totalpages: 2058125
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11624 pages used for memmap
[    0.000000]   DMA32 zone: 743921 pages, LIFO batch:31
[    0.000000]   Normal zone: 20472 pages used for memmap
[    0.000000]   Normal zone: 1310208 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at [mem 0xb7a00000-0xbf9fffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb6c73000-0xb6cb9fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb6cba000-0xb6cc1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb6cc2000-0xb6dfdfff]
[    0.000000] PM: Registered nosave memory: [mem 0xb6e00000-0xb6e0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb6e10000-0xb6e1cfff]
[    0.000000] PM: Registered nosave memory: [mem 0xb6e1d000-0xb6e40fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb6e41000-0xb6e83fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb7000000-0xb77fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb7800000-0xbf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] [mem 0xbfa00000-0xfed1bfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x93/0x558 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu @(____ptrval____) s147456 r8192 d28672 u1048576
[    0.000000] pcpu-alloc: s147456 r8192 d28672 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2025809
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.18.11-200.fc28.x86_64 root=/dev/mapper/fedora-root ro resume=/dev/mapper/fedora-swap rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=fr_FR.UTF-8
[    0.000000] Memory: 7985916K/8232500K available (12300K kernel code, 1618K rwdata, 4040K rodata, 2160K init, 1336K bss, 246584K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 37804 entries in 148 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=2.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 65792, nr_irqs: 440, preallocated irqs: 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180531
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.005000] tsc: Fast TSC calibration using PIT
[    0.006000] tsc: Detected 2594.070 MHz processor
[    0.006000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x25645a86d3f, max_idle_ns: 440795320789 ns
[    0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.14 BogoMIPS (lpj=2594070)
[    0.006000] pid_max: default: 32768 minimum: 301
[    0.007013] Security Framework initialized
[    0.007014] Yama: becoming mindful.
[    0.007018] SELinux:  Initializing.
[    0.007037] SELinux:  Starting in permissive mode
[    0.008429] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.009194] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.009239] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.009262] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.009478] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.009479] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.009483] mce: CPU supports 7 MCE banks
[    0.009491] CPU0: Thermal monitoring enabled (TM1)
[    0.009500] process: using mwait in idle threads
[    0.009503] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.009503] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.009505] Spectre V2 : Mitigation: Full generic retpoline
[    0.009506] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.009506] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.009507] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.009508] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.009602] Freeing SMP alternatives memory: 36K
[    0.011079] TSC deadline timer enabled
[    0.011082] smpboot: CPU0: Intel(R) Pentium(R) CPU G620 @ 2.60GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.011190] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.011212] ... version:                3
[    0.011213] ... bit width:              48
[    0.011213] ... generic registers:      8
[    0.011214] ... value mask:             0000ffffffffffff
[    0.011215] ... max period:             00007fffffffffff
[    0.011215] ... fixed-purpose events:   3
[    0.011216] ... event mask:             00000007000000ff
[    0.011254] Hierarchical SRCU implementation.
[    0.011942] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.011959] smp: Bringing up secondary CPUs ...
[    0.012000] x86: Booting SMP configuration:
[    0.012000] .... node  #0, CPUs:      #1
[    0.013028] smp: Brought up 1 node, 2 CPUs
[    0.013028] smpboot: Max logical packages: 1
[    0.013028] smpboot: Total of 2 processors activated (10376.28 BogoMIPS)
[    0.014250] devtmpfs: initialized
[    0.014250] x86/mm: Memory block size: 128MB
[    0.015034] PM: Registering ACPI NVS region [mem 0xb6c73000-0xb6cb9fff] (290816 bytes)
[    0.015040] PM: Registering ACPI NVS region [mem 0xb6e10000-0xb6e1cfff] (53248 bytes)
[    0.015042] PM: Registering ACPI NVS region [mem 0xb6e41000-0xb6e83fff] (274432 bytes)
[    0.015086] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.015086] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.015086] pinctrl core: initialized pinctrl subsystem
[    0.015161] RTC time: 18:16:59, date: 10/05/18
[    0.015286] NET: Registered protocol family 16
[    0.015392] audit: initializing netlink subsys (disabled)
[    0.015399] audit: type=2000 audit(1538763419.015:1): state=initialized audit_enabled=0 res=1
[    0.015399] cpuidle: using governor menu
[    0.015399] ACPI: bus type PCI registered
[    0.015399] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.015399] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.015399] PCI: not using MMCONFIG
[    0.015399] PCI: Using configuration type 1 for base access
[    0.015399] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.017135] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.017135] cryptd: max_cpu_qlen set to 1000
[    0.017135] ACPI: Added _OSI(Module Device)
[    0.017135] ACPI: Added _OSI(Processor Device)
[    0.017135] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.017135] ACPI: Added _OSI(Processor Aggregator Device)
[    0.017135] ACPI: Added _OSI(Linux-Dell-Video)
[    0.020808] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.022320] ACPI: Dynamic OEM Table Load:
[    0.022325] ACPI: SSDT 0xFFFF9990F6348800 000202 (v01 AMI    IST      00000001 MSFT 03000001)
[    0.022479] ACPI: Dynamic OEM Table Load:
[    0.022482] ACPI: SSDT 0xFFFF9990F5C40E40 000084 (v01 AMI    CST      00000001 MSFT 03000001)
[    0.022975] ACPI: Interpreter enabled
[    0.022992] ACPI: (supports S0 S3 S4 S5)
[    0.022993] ACPI: Using IOAPIC for interrupt routing
[    0.023020] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.023074] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.023079] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[    0.023460] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.023657] ACPI: Enabled 9 GPEs in block 00 to 3F
[    0.023721] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.028169] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.028174] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.028290] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[    0.028396] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.028645] PCI host bridge to bus 0000:00
[    0.028647] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.028649] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.028650] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.028651] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.028653] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.028654] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.028655] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xffffffff window]
[    0.028657] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.028665] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.028749] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[    0.028759] pci 0000:00:02.0: reg 0x10: [mem 0xfe000000-0xfe3fffff 64bit]
[    0.028765] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.028769] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.028864] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.028890] pci 0000:00:16.0: reg 0x10: [mem 0xfe608000-0xfe60800f 64bit]
[    0.028964] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.029043] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.029065] pci 0000:00:1a.0: reg 0x10: [mem 0xfe607000-0xfe6073ff]
[    0.029148] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.029225] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.029247] pci 0000:00:1b.0: reg 0x10: [mem 0xfe600000-0xfe603fff 64bit]
[    0.029320] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.029389] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.029473] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.029557] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.029641] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.029723] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.029806] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.029887] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.029970] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.030054] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.030077] pci 0000:00:1d.0: reg 0x10: [mem 0xfe606000-0xfe6063ff]
[    0.030160] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.030232] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[    0.030400] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[    0.030419] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.030426] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.030434] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.030442] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.030450] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.030458] pci 0000:00:1f.2: reg 0x24: [mem 0xfe605000-0xfe6057ff]
[    0.030498] pci 0000:00:1f.2: PME# supported from D3hot
[    0.030565] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.030584] pci 0000:00:1f.3: reg 0x10: [mem 0xfe604000-0xfe6040ff 64bit]
[    0.030604] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.030715] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.030785] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.030820] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.030853] pci 0000:02:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[    0.030875] pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[    0.030988] pci 0000:02:00.0: supports D1 D2
[    0.030989] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.031106] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.031110] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    0.031118] pci 0000:00:1c.1:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.031184] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.031236] pci 0000:03:00.0: reg 0x10: [mem 0xfe500000-0xfe507fff 64bit]
[    0.031439] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.031545] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.031551] pci 0000:00:1c.3:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.031614] pci 0000:04:00.0: [168c:002b] type 00 class 0x028000
[    0.031658] pci 0000:04:00.0: reg 0x10: [mem 0xfe400000-0xfe40ffff 64bit]
[    0.031810] pci 0000:04:00.0: supports D1
[    0.031811] pci 0000:04:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.031922] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.031928] pci 0000:00:1c.4:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.032453] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.032500] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.032546] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.032590] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.032635] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.032681] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.032726] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.032771] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.032891] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.032891] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.032891] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.032891] vgaarb: loaded
[    0.033030] SCSI subsystem initialized
[    0.033040] libata version 3.00 loaded.
[    0.033040] ACPI: bus type USB registered
[    0.033041] usbcore: registered new interface driver usbfs
[    0.033048] usbcore: registered new interface driver hub
[    0.033056] usbcore: registered new device driver usb
[    0.033075] pps_core: LinuxPPS API ver. 1 registered
[    0.033075] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.033078] PTP clock support registered
[    0.033112] EDAC MC: Ver: 3.0.0
[    0.033190] PCI: Using ACPI for IRQ routing
[    0.039694] PCI: pci_cache_line_size set to 64 bytes
[    0.039744] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.039745] e820: reserve RAM buffer [mem 0xb6c73000-0xb7ffffff]
[    0.039747] e820: reserve RAM buffer [mem 0xb6e00000-0xb7ffffff]
[    0.039748] e820: reserve RAM buffer [mem 0xb7000000-0xb7ffffff]
[    0.039749] e820: reserve RAM buffer [mem 0x23fe00000-0x23fffffff]
[    0.039841] NetLabel: Initializing
[    0.039842] NetLabel:  domain hash size = 128
[    0.039842] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.039857] NetLabel:  unlabeled traffic allowed by default
[    0.039861] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.039861] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.041016] clocksource: Switched to clocksource tsc-early
[    0.053752] VFS: Disk quotas dquot_6.6.0
[    0.053767] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.053830] pnp: PnP ACPI init
[    0.053967] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[    0.053969] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.053972] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.053973] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.053975] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.053980] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.054063] system 00:01: [io  0x0a00-0x0a3f] has been reserved
[    0.054067] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.054333] pnp 00:02: Plug and Play ACPI device, IDs NTN0530 (active)
[    0.054354] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.054402] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.054406] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.054566] system 00:05: [io  0x0400-0x0453] has been reserved
[    0.054568] system 00:05: [io  0x0458-0x047f] has been reserved
[    0.054570] system 00:05: [io  0x1180-0x119f] has been reserved
[    0.054571] system 00:05: [io  0x0500-0x057f] has been reserved
[    0.054573] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.054575] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.054577] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.054579] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.054582] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.054630] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.054634] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.054811] pnp: PnP ACPI: found 7 devices
[    0.060501] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.060557] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.060570] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.060573] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    0.060580] pci 0000:00:1c.1:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.060586] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.060591] pci 0000:00:1c.3:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.060599] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.060604] pci 0000:00:1c.4:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.060613] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.060614] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.060616] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.060617] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.060618] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.060620] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.060621] pci_bus 0000:00: resource 10 [mem 0xbfa00000-0xffffffff window]
[    0.060623] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.060624] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.060626] pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
[    0.060627] pci_bus 0000:04: resource 1 [mem 0xfe400000-0xfe4fffff]
[    0.060694] NET: Registered protocol family 2
[    0.060834] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.060869] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.060998] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.061141] TCP: Hash tables configured (established 65536 bind 65536)
[    0.061180] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.061207] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.061296] NET: Registered protocol family 1
[    0.061322] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[    0.061337] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.061735] PCI: CLS 64 bytes, default 64
[    0.061784] Unpacking initramfs...
[    0.404158] Freeing initrd memory: 23020K
[    0.404193] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.404196] software IO TLB [mem 0xb2c73000-0xb6c73000] (64MB) mapped at [(____ptrval____)-(____ptrval____)]
[    0.405016] Initialise system trusted keyrings
[    0.405025] Key type blacklist registered
[    0.405052] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.406218] zbud: loaded
[    0.406648] pstore: using deflate compression
[    0.406695] SELinux:  Registering netfilter hooks
[    0.591248] alg: No test for 842 (842-generic)
[    0.591269] alg: No test for 842 (842-scomp)
[    0.596485] NET: Registered protocol family 38
[    0.596488] Key type asymmetric registered
[    0.596490] Asymmetric key parser 'x509' registered
[    0.596540] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.596562] io scheduler noop registered
[    0.596563] io scheduler deadline registered
[    0.596606] io scheduler cfq registered (default)
[    0.596607] io scheduler mq-deadline registered
[    0.596653] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.597314] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[    0.597337] pcieport 0000:00:1c.1: Signaling PME with IRQ 25
[    0.597358] pcieport 0000:00:1c.3: Signaling PME with IRQ 26
[    0.597380] pcieport 0000:00:1c.4: Signaling PME with IRQ 27
[    0.597403] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.597418] intel_idle: MWAIT substates: 0x1120
[    0.597419] intel_idle: v0.4.1 model 0x2A
[    0.597483] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.597555] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.597564] ACPI: Power Button [PWRB]
[    0.597594] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.597607] ACPI: Power Button [PWRF]
[    0.598042] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.599502] Non-volatile memory driver v1.3
[    0.599523] Linux agpgart interface v0.103
[    0.599743] ahci 0000:00:1f.2: version 3.0
[    0.599872] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    0.599875] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
[    0.602269] scsi host0: ahci
[    0.602358] scsi host1: ahci
[    0.602429] scsi host2: ahci
[    0.602489] scsi host3: ahci
[    0.602520] ata1: SATA max UDMA/133 abar m2048@0xfe605000 port 0xfe605100 irq 28
[    0.602522] ata2: SATA max UDMA/133 abar m2048@0xfe605000 port 0xfe605180 irq 28
[    0.602523] ata3: DUMMY
[    0.602524] ata4: DUMMY
[    0.602613] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.602616] ehci-pci: EHCI PCI platform driver
[    0.602704] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.602743] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.602757] ehci-pci 0000:00:1a.0: debug port 2
[    0.606667] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.606678] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe607000
[    0.613022] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.613091] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    0.613092] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.613094] usb usb1: Product: EHCI Host Controller
[    0.613095] usb usb1: Manufacturer: Linux 4.18.11-200.fc28.x86_64 ehci_hcd
[    0.613096] usb usb1: SerialNumber: 0000:00:1a.0
[    0.613262] hub 1-0:1.0: USB hub found
[    0.613270] hub 1-0:1.0: 2 ports detected
[    0.613442] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.613522] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.613533] ehci-pci 0000:00:1d.0: debug port 2
[    0.617438] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.617449] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe606000
[    0.624022] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.624085] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    0.624087] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.624088] usb usb2: Product: EHCI Host Controller
[    0.624090] usb usb2: Manufacturer: Linux 4.18.11-200.fc28.x86_64 ehci_hcd
[    0.624091] usb usb2: SerialNumber: 0000:00:1d.0
[    0.624247] hub 2-0:1.0: USB hub found
[    0.624254] hub 2-0:1.0: 2 ports detected
[    0.624353] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.624358] ohci-pci: OHCI PCI platform driver
[    0.624366] uhci_hcd: USB Universal Host Controller Interface driver
[    0.624438] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.624519] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[    0.628915] xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000
[    0.629132] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    0.629134] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.629135] usb usb3: Product: xHCI Host Controller
[    0.629137] usb usb3: Manufacturer: Linux 4.18.11-200.fc28.x86_64 xhci-hcd
[    0.629138] usb usb3: SerialNumber: 0000:03:00.0
[    0.629309] hub 3-0:1.0: USB hub found
[    0.629321] hub 3-0:1.0: 2 ports detected
[    0.629425] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.629499] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[    0.629502] xhci_hcd 0000:03:00.0: Host supports USB 3.0  SuperSpeed
[    0.629528] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.629549] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[    0.629551] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.629552] usb usb4: Product: xHCI Host Controller
[    0.629554] usb usb4: Manufacturer: Linux 4.18.11-200.fc28.x86_64 xhci-hcd
[    0.629555] usb usb4: SerialNumber: 0000:03:00.0
[    0.629643] hub 4-0:1.0: USB hub found
[    0.629652] hub 4-0:1.0: 2 ports detected
[    0.629752] usbcore: registered new interface driver usbserial_generic
[    0.629757] usbserial: USB Serial support registered for generic
[    0.629778] i8042: PNP: No PS/2 controller found.
[    0.629779] i8042: Probing ports directly.
[    0.632653] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.632657] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.632758] mousedev: PS/2 mouse device common for all mice
[    0.632859] rtc_cmos 00:03: RTC can wake from S4
[    0.633005] rtc_cmos 00:03: registered as rtc0
[    0.633007] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.633051] device-mapper: uevent: version 1.0.3
[    0.633107] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    0.633148] intel_pstate: Intel P-state driver initializing
[    0.633675] hidraw: raw HID events driver (C) Jiri Kosina
[    0.633724] usbcore: registered new interface driver usbhid
[    0.633724] usbhid: USB HID core driver
[    0.633832] drop_monitor: Initializing network drop monitor service
[    0.633968] Initializing XFRM netlink socket
[    0.634139] NET: Registered protocol family 10
[    0.637588] Segment Routing with IPv6
[    0.637622] mip6: Mobile IPv6
[    0.637624] NET: Registered protocol family 17
[    0.637919] RAS: Correctable Errors collector initialized.
[    0.637955] microcode: sig=0x206a7, pf=0x2, revision=0x2e
[    0.638000] microcode: Microcode Update Driver: v2.2.
[    0.638022] sched_clock: Marking stable (638003726, 0)->(872072423, -234068697)
[    0.638237] registered taskstats version 1
[    0.638248] Loading compiled-in X.509 certificates
[    0.688111] Loaded X.509 cert 'Fedora kernel signing key: bfde88a501fc56acb82fa1f82f63f65cd9b6a346'
[    0.688133] zswap: loaded using pool lzo/zbud
[    0.690081] Key type big_key registered
[    0.691785] Key type encrypted registered
[    0.691794] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.691798] ima: Allocated hash algorithm: sha1
[    0.692141]   Magic number: 6:30:291
[    0.692168] tty tty24: hash matches
[    0.692244] rtc_cmos 00:03: setting system clock to 2018-10-05 18:17:00 UTC (1538763420)
[    0.910030] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.910053] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.912522] ata1.00: ATA-8: WDC WD10EARX-22N0YB0, 51.0AB51, max UDMA/133
[    0.912525] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.913901] ata2.00: ATAPI: TSSTcorp CDDVDW SN-208AB, TM00, max UDMA/100
[    0.915072] ata1.00: configured for UDMA/133
[    0.915365] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EARX-22N AB51 PQ: 0 ANSI: 5
[    0.915695] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.915750] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    0.915752] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.915778] sd 0:0:0:0: [sda] Write Protect is off
[    0.915781] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.915812] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.920016] ata2.00: configured for UDMA/100
[    0.924848] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208AB  TM00 PQ: 0 ANSI: 5
[    0.938023] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.946022] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.960713]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[    0.961163] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.965261] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.965263] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.965428] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    0.965484] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    0.967455] Freeing unused kernel image memory: 2160K
[    0.971016] Write protecting the kernel read-only data: 18432k
[    0.971573] Freeing unused kernel image memory: 2012K
[    0.971636] Freeing unused kernel image memory: 56K
[    0.973452] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    0.982628] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.982628] x86/mm: Checking user space page tables
[    0.989192] usb 4-1: New USB device found, idVendor=0480, idProduct=b207, bcdDevice= 3.15
[    0.989194] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    0.989196] usb 4-1: Product: External USB 3.0
[    0.989198] usb 4-1: Manufacturer: TOSHIBA
[    0.989199] usb 4-1: SerialNumber: 20170214007084F
[    0.992944] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.992950] rodata_test: all tests were successful
[    1.002287] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    1.014149] systemd[1]: Detected architecture x86-64.
[    1.014153] systemd[1]: Running in initial RAM disk.
[    1.016226] systemd[1]: Set hostname to <saddak_msi>.
[    1.068368] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    1.068371] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.068622] hub 1-1:1.0: USB hub found
[    1.068719] hub 1-1:1.0: 4 ports detected
[    1.074350] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    1.074353] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.074531] hub 2-1:1.0: USB hub found
[    1.074610] hub 2-1:1.0: 6 ports detected
[    1.075071] random: systemd: uninitialized urandom read (16 bytes read)
[    1.075094] systemd[1]: Reached target Swap.
[    1.075207] random: systemd: uninitialized urandom read (16 bytes read)
[    1.075270] systemd[1]: Listening on Journal Audit Socket.
[    1.075287] random: systemd: uninitialized urandom read (16 bytes read)
[    1.075388] systemd[1]: Listening on Journal Socket.
[    1.076970] systemd[1]: Starting Setup Virtual Console...
[    1.077957] systemd[1]: Starting Load Kernel Modules...
[    1.078021] systemd[1]: Reached target Slices.
[    1.111448] usb 4-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[    1.118605] audit: type=1130 audit(1538763420.924:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.123873] audit: type=1130 audit(1538763420.929:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.123888] usb 4-2: New USB device found, idVendor=1058, idProduct=1048, bcdDevice=10.22
[    1.123891] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[    1.123892] usb 4-2: Product: Elements 1048
[    1.123894] usb 4-2: Manufacturer: Western Digital
[    1.123895] usb 4-2: SerialNumber: 575831314136333737343739
[    1.151796] audit: type=1130 audit(1538763420.957:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.205858] audit: type=1130 audit(1538763421.011:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.205861] audit: type=1131 audit(1538763421.011:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.237428] audit: type=1130 audit(1538763421.043:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.272525] audit: type=1130 audit(1538763421.078:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.286313] audit: type=1130 audit(1538763421.092:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.294338] usb-storage 4-1:1.0: USB Mass Storage device detected
[    1.294878] scsi host4: usb-storage 4-1:1.0
[    1.294953] usb-storage 4-2:1.0: USB Mass Storage device detected
[    1.296618] scsi host5: usb-storage 4-2:1.0
[    1.296681] usbcore: registered new interface driver usb-storage
[    1.300610] usbcore: registered new interface driver uas
[    1.345021] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[    1.345040] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
[    1.364901] audit: type=1130 audit(1538763421.170:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.426978] usb 2-1.1: New USB device found, idVendor=04f2, idProduct=0976, bcdDevice= 1.31
[    1.426981] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.426983] usb 2-1.1: Product: Wireless Device
[    1.426984] usb 2-1.1: Manufacturer: Chicony
[    1.428687] input: Chicony Wireless Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:04F2:0976.0001/input/input5
[    1.440021] tsc: Refined TSC clocksource calibration: 2594.107 MHz
[    1.440026] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647d583cf, max_idle_ns: 440795304232 ns
[    1.440038] clocksource: Switched to clocksource tsc
[    1.443858] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.444432] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl, 8c:89:a5:9f:96:e0, XID 2c900800, IRQ 32
[    1.444434] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.478856] usb 1-1.3: New USB device found, idVendor=5986, idProduct=0241, bcdDevice= 3.08
[    1.478859] usb 1-1.3: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[    1.478861] usb 1-1.3: Product: BisonCam, NB Pro
[    1.478862] usb 1-1.3: Manufacturer: BISON Corporation
[    1.480153] hid-generic 0003:04F2:0976.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony Wireless Device] on usb-0000:00:1d.0-1.1/input0
[    1.482348] input: Chicony Wireless Device Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:04F2:0976.0002/input/input6
[    1.516129] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.534652] input: Chicony Wireless Device System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:04F2:0976.0002/input/input7
[    1.534705] input: Chicony Wireless Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:04F2:0976.0002/input/input8
[    1.534791] hid-generic 0003:04F2:0976.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Chicony Wireless Device] on usb-0000:00:1d.0-1.1/input1
[    1.536430] input: Chicony Wireless Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.2/0003:04F2:0976.0003/input/input9
[    1.536515] hid-generic 0003:04F2:0976.0003: input,hidraw2: USB HID v1.11 Mouse [Chicony Wireless Device] on usb-0000:00:1d.0-1.1/input2
[    1.580016] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[    1.600014] usb 2-1.3: new full-speed USB device number 4 using ehci-pci
[    1.601093] random: fast init done
[    1.685848] usb 1-1.4: New USB device found, idVendor=0408, idProduct=3008, bcdDevice= 2.10
[    1.685850] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[    1.685852] usb 1-1.4: Product: OpticalTouchScreen
[    1.685854] usb 1-1.4: Manufacturer: Quanta
[    1.685855] usb 1-1.4: SerialNumber: 0000
[    1.688762] [drm] Replacing VGA console driver
[    1.688998] input: Quanta OpticalTouchScreen Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:0408:3008.0004/input/input10
[    1.689184] input: Quanta OpticalTouchScreen Touchscreen as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:0408:3008.0004/input/input11
[    1.689195] Console: switching to colour dummy device 80x25
[    1.689280] hid-generic 0003:0408:3008.0004: input,hiddev97,hidraw3: USB HID v1.10 Mouse [Quanta OpticalTouchScreen] on usb-0000:00:1a.0-1.4/input0
[    1.691516] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.691517] [drm] Driver supports precise vblank timestamp query.
[    1.692243] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.696407] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
[    1.698973] usb 2-1.3: New USB device found, idVendor=413c, idProduct=1003, bcdDevice= 1.00
[    1.698975] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.698977] usb 2-1.3: Product: Dell USB Keyboard Hub
[    1.698978] usb 2-1.3: Manufacturer: Dell
[    1.699741] hub 2-1.3:1.0: USB hub found
[    1.699847] hub 2-1.3:1.0: 3 ports detected
[    1.712074] input: Quanta OpticalTouchScreen as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:0408:3008.0004/input/input13
[    1.712194] hid-multitouch 0003:0408:3008.0004: input,hiddev97,hidraw3: USB HID v1.10 Mouse [Quanta OpticalTouchScreen] on usb-0000:00:1a.0-1.4/input0
[    1.827357] fbcon: inteldrmfb (fb0) is primary device
[    1.907688] Console: switching to colour frame buffer device 170x48
[    1.927082] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.979014] usb 2-1.3.1: new full-speed USB device number 5 using ehci-pci
[    2.058093] usb 2-1.3.1: New USB device found, idVendor=413c, idProduct=2010, bcdDevice= 1.00
[    2.058105] usb 2-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.058106] usb 2-1.3.1: Product: Dell USB Keyboard Hub
[    2.058108] usb 2-1.3.1: Manufacturer: Dell
[    2.059313] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.1/2-1.3.1:1.0/0003:413C:2010.0005/input/input14
[    2.111258] hid-generic 0003:413C:2010.0005: input,hidraw4: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.0-1.3.1/input0
[    2.112442] input: Dell Dell USB Keyboard Hub Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.1/2-1.3.1:1.1/0003:413C:2010.0006/input/input15
[    2.164085] input: Dell Dell USB Keyboard Hub System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.1/2-1.3.1:1.1/0003:413C:2010.0006/input/input16
[    2.164140] hid-generic 0003:413C:2010.0006: input,hidraw5: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.0-1.3.1/input1
[    2.192752] random: crng init done
[    2.192754] random: 7 urandom warning(s) missed due to ratelimiting
[    2.336364] scsi 5:0:0:0: Direct-Access     WD       Elements 1048    1022 PQ: 0 ANSI: 6
[    2.336635] sd 5:0:0:0: Attached scsi generic sg2 type 0
[    2.336806] sd 5:0:0:0: [sdb] 1953519616 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.337560] sd 5:0:0:0: [sdb] Write Protect is off
[    2.337563] sd 5:0:0:0: [sdb] Mode Sense: 47 00 10 08
[    2.337945] sd 5:0:0:0: [sdb] No Caching mode page found
[    2.337976] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[    2.339108] scsi 4:0:0:0: Direct-Access     TOSHIBA  External USB 3.0 5438 PQ: 0 ANSI: 6
[    2.339383] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    2.341478] sd 4:0:0:0: [sdc] 1953525164 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.341834] sd 4:0:0:0: [sdc] Write Protect is off
[    2.341836] sd 4:0:0:0: [sdc] Mode Sense: 23 00 00 00
[    2.342173] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.343071]  sdb: sdb1 sdb2
[    2.344338] sd 5:0:0:0: [sdb] Attached SCSI disk
[    2.521857]  sdc: sdc1 sdc2
[    2.524465] sd 4:0:0:0: [sdc] Attached SCSI disk
[    3.305707] PM: Image not found (code -22)
[    3.449538] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    3.983063] systemd-journald[165]: Received SIGTERM from PID 1 (systemd).
[    4.234791] systemd: 18 output lines suppressed due to ratelimiting
[    5.016144] kauditd_printk_skb: 36 callbacks suppressed
[    5.016146] audit: type=1404 audit(1538763424.822:47): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1
[    5.175343] SELinux: 32768 avtab hash slots, 115618 rules.
[    5.196025] SELinux: 32768 avtab hash slots, 115618 rules.
[    5.576455] SELinux:  8 users, 14 roles, 5135 types, 322 bools, 1 sens, 1024 cats
[    5.576459] SELinux:  129 classes, 115618 rules
[    5.582495] SELinux:  Class bpf not defined in policy.
[    5.582497] SELinux:  Class xdp_socket not defined in policy.
[    5.582497] SELinux: the above unknown classes and permissions will be allowed
[    5.582504] SELinux:  policy capability network_peer_controls=1
[    5.582505] SELinux:  policy capability open_perms=1
[    5.582505] SELinux:  policy capability extended_socket_class=1
[    5.582506] SELinux:  policy capability always_check_network=0
[    5.582506] SELinux:  policy capability cgroup_seclabel=1
[    5.582507] SELinux:  policy capability nnp_nosuid_transition=1
[    5.582508] SELinux:  Completing initialization.
[    5.582508] SELinux:  Setting up existing superblocks.
[    5.601688] audit: type=1403 audit(1538763425.407:48): auid=4294967295 ses=4294967295 lsm=selinux res=1
[    5.604152] systemd[1]: Successfully loaded SELinux policy in 599.640ms.
[    5.732537] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[    5.792130] systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 33.388ms.
[    5.825788] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    5.837157] systemd[1]: Detected architecture x86-64.
[    5.849643] systemd[1]: Set hostname to <saddak_msi>.
[    8.275033] audit: type=1130 audit(1538759828.081:49): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.275038] audit: type=1131 audit(1538759828.082:50): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.275802] systemd[1]: Stopped Switch Root.
[    8.276031] audit: type=1130 audit(1538759828.082:51): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.276055] audit: type=1131 audit(1538759828.083:52): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.276164] systemd[1]: Received SIGRTMIN+20 from PID 323 (plymouthd).
[    8.276244] systemd[1]: systemd-journald.service: Service has no hold-off time, scheduling restart.
[    8.276365] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[    8.276389] systemd[1]: Stopped Journal Service.
[    8.276495] audit: type=1130 audit(1538759828.083:53): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.276511] audit: type=1131 audit(1538759828.083:54): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.277947] systemd[1]: Starting Journal Service...
[    8.281890] systemd[1]: Listening on Process Core Dump Socket.
[    8.395659] audit: type=1130 audit(1538759828.202:55): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.439272] EXT4-fs (dm-0): re-mounted. Opts: (null)
[    8.441871] audit: type=1130 audit(1538759828.248:56): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.514939] systemd-journald[537]: File /run/log/journal/e77681cab79a4e4e94fe60151fd61653/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    8.732207] systemd-journald[537]: Received request to flush runtime journal from PID 1
[    9.659648] vboxdrv: loading out-of-tree module taints kernel.
[    9.659839] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    9.664129] vboxdrv: Found 2 processor cores
[    9.680440] vboxdrv: TSC mode is Invariant, tentative frequency 2594106860 Hz
[    9.680441] vboxdrv: Successfully loaded version 5.2.18_RPMFusion (interface 0x00290001)
[    9.761041] VBoxNetFlt: Successfully started.
[    9.846142] VBoxNetAdp: Successfully started.
[    9.916726] VBoxPciLinuxInit
[    9.916735] vboxpci: IOMMU not found (not registered)
[   10.161688] kauditd_printk_skb: 6 callbacks suppressed
[   10.161691] audit: type=1130 audit(1538759829.968:63): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=fedora-readonly comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   10.309747] audit: type=1130 audit(1538759830.116:64): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   10.575941] audit: type=1130 audit(1538759830.382:65): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   10.890479] audit: type=1130 audit(1538759830.697:66): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.376836] audit: type=1130 audit(1538759832.183:67): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.565265] audit: type=1130 audit(1538759832.372:68): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.165399] nuvoton-cir 00:02: Wake PNP Port not valid!
[   13.165408] nuvoton-cir: probe of 00:02 failed with error -22
[   13.298379] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   13.299108] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   13.642612] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   13.642613] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   13.642614] RAPL PMU: hw unit of domain package 2^-16 Joules
[   13.642615] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   13.680734] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   13.998298] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   14.235311] ath: EEPROM regdomain: 0x60
[   14.235313] ath: EEPROM indicates we should expect a direct regpair map
[   14.235314] ath: Country alpha2 being used: 00
[   14.235315] ath: Regpair used: 0x60
[   14.264798] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   14.265159] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffb09a811c0000, irq=16
[   14.314104] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   14.314107] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   14.314109] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.314110] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   14.314111] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   14.314113] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   14.314114] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   14.390071] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   14.390185] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[   14.390249] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[   14.649125] media: Linux media interface: v0.10
[   14.684915] videodev: Linux video capture interface: v2.00
[   14.849688] intel_rapl: Found RAPL domain package
[   14.849689] intel_rapl: Found RAPL domain core
[   14.849690] intel_rapl: Found RAPL domain uncore
[   14.849695] intel_rapl: RAPL package 0 domain package locked by BIOS
[   15.194726] input: MSI WMI hotkeys as /devices/virtual/input/input21
[   15.213579] iTCO_vendor_support: vendor-support=0
[   15.219321] gpio_ich: GPIO from 436 to 511 on gpio_ich
[   15.330775] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   15.330822] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[   15.330984] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   15.410525] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0241)
[   15.473335] uvcvideo 1-1.3:1.0: Entity type for entity Extension 2 was not initialized!
[   15.473339] uvcvideo 1-1.3:1.0: Entity type for entity Extension 5 was not initialized!
[   15.473341] uvcvideo 1-1.3:1.0: Entity type for entity Processing 3 was not initialized!
[   15.473343] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
[   15.473458] input: BisonCam, NB Pro: BisonCam, NB  as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input22
[   15.473590] usbcore: registered new interface driver uvcvideo
[   15.473591] USB Video Class driver (1.1.1)
[   16.459568] audit: type=1130 audit(1538759836.266:69): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.495820] Adding 8146940k swap on /dev/mapper/fedora-swap.  Priority:-2 extents:1 across:8146940k FS
[   16.618107] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0
[   16.641317] audit: type=1130 audit(1538759836.448:70): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.644076] audit: type=1130 audit(1538759836.450:71): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.060673] audit: type=1130 audit(1538759836.867:72): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.253237] audit: type=1130 audit(1538759837.060:73): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.253241] audit: type=1131 audit(1538759837.060:74): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.610621] audit: type=1130 audit(1538759837.417:75): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-e0c27817\x2dcad0\x2d4f04\x2d84bf\x2d772c926da7eb comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.723186] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   17.752708] audit: type=1130 audit(1538759837.559:76): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-pvscan@8:8 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.851103] audit: type=1130 audit(1538759837.658:77): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-mapper-fedora\x2dhome comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.950831] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[   18.014769] audit: type=1130 audit(1538759837.821:78): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   18.522477] RPC: Registered named UNIX socket transport module.
[   18.522479] RPC: Registered udp transport module.
[   18.522479] RPC: Registered tcp transport module.
[   18.522480] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   38.158611] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   42.748173] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   42.958197] r8169 0000:02:00.0 enp2s0: link down
[   42.958294] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   43.002469] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   43.017827] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   43.040235] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   44.208088] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   54.921612] fuse init (API version 7.27)
[  116.695951] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[  117.664315] wlp4s0: authenticate with a0:63:91:d1:2c:78
[  117.684930] wlp4s0: send auth to a0:63:91:d1:2c:78 (try 1/3)
[  117.687133] wlp4s0: authenticated
[  117.688078] wlp4s0: associate with a0:63:91:d1:2c:78 (try 1/3)
[  117.694080] wlp4s0: RX AssocResp from a0:63:91:d1:2c:78 (capab=0x411 status=0 aid=1)
[  117.694236] wlp4s0: associated
[  117.785970] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[saddak@saddak_msi ~]$ dmesg wc -l
dmesg: option requires an argument -- 'l'
Exécutez « dmesg --help » pour obtenir des renseignements complémentaires.
[saddak@saddak_msi ~]$ dmesg | wc -l > dmesg.txt
[saddak@saddak_msi ~]$ dmesg | wc -l 
856
[saddak@saddak_msi ~]$ dmesg
[    0.000000] microcode: microcode updated early to revision 0x2e, date = 2018-04-10
[    0.000000] Linux version 4.18.11-200.fc28.x86_64 (mockbuild@bkernel04.phx2.fedoraproject.org) (gcc version 8.1.1 20180712 (Red Hat 8.1.1-5) (GCC)) #1 SMP Sun Sep 30 15:31:40 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.18.11-200.fc28.x86_64 root=/dev/mapper/fedora-root ro resume=/dev/mapper/fedora-swap rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=fr_FR.UTF-8
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000b6c72fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b6c73000-0x00000000b6cb9fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b6cba000-0x00000000b6cc1fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000b6cc2000-0x00000000b6dfdfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b6dfe000-0x00000000b6dfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b6e00000-0x00000000b6e0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b6e10000-0x00000000b6e1cfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b6e1d000-0x00000000b6e40fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b6e41000-0x00000000b6e83fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b6e84000-0x00000000b6ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b7800000-0x00000000bf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: MICRO-STAR INTERNATIONAL CO., LTD MS-AC73/MS-AC73, BIOS V1.40 11/04/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x23fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask FC0000000 write-back
[    0.000000]   2 base 0B7800000 mask FFF800000 uncachable
[    0.000000]   3 base 0B8000000 mask FF8000000 uncachable
[    0.000000]   4 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   5 base 23FE00000 mask FFFE00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: update [mem 0xb7800000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xb7000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcdd0-0x000fcddf] mapped at [(____ptrval____)]
[    0.000000] Base memory trampoline at [(____ptrval____)] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x167aaa000, 0x167aaafff] PGTABLE
[    0.000000] BRK [0x167aab000, 0x167aabfff] PGTABLE
[    0.000000] BRK [0x167aac000, 0x167aacfff] PGTABLE
[    0.000000] BRK [0x167aad000, 0x167aadfff] PGTABLE
[    0.000000] BRK [0x167aae000, 0x167aaefff] PGTABLE
[    0.000000] BRK [0x167aaf000, 0x167aaffff] PGTABLE
[    0.000000] BRK [0x167ab0000, 0x167ab0fff] PGTABLE
[    0.000000] BRK [0x167ab1000, 0x167ab1fff] PGTABLE
[    0.000000] BRK [0x167ab2000, 0x167ab2fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x352fb000-0x36975fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 MSI_NB)
[    0.000000] ACPI: XSDT 0x00000000B6CBA068 000054 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000B6CC1768 0000F4 (v04 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000B6CBA150 007616 (v02 MSI_NB MEGABOOK 00000016 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000B6E14F80 000040
[    0.000000] ACPI: APIC 0x00000000B6CC1860 000062 (v03 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000B6CC18C8 000098 (v01 AMICPU PROC     00000001 MSFT 03000001)
[    0.000000] ACPI: MCFG 0x00000000B6CC1960 00003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
[    0.000000] ACPI: SLIC 0x00000000B6CC19A0 000176 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: HPET 0x00000000B6CC1B18 000038 (v01 MSI_NB MEGABOOK 01072009 AMI. 00000004)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x23fdd1000-0x23fdfbfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000023fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000b6c72fff]
[    0.000000]   node   0: [mem 0x00000000b6dfe000-0x00000000b6dfffff]
[    0.000000]   node   0: [mem 0x00000000b6e84000-0x00000000b6ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000023fdfffff]
[    0.000000] Reserved but unavailable: 5747 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fdfffff]
[    0.000000] On node 0 totalpages: 2058125
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11624 pages used for memmap
[    0.000000]   DMA32 zone: 743921 pages, LIFO batch:31
[    0.000000]   Normal zone: 20472 pages used for memmap
[    0.000000]   Normal zone: 1310208 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at [mem 0xb7a00000-0xbf9fffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb6c73000-0xb6cb9fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb6cba000-0xb6cc1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb6cc2000-0xb6dfdfff]
[    0.000000] PM: Registered nosave memory: [mem 0xb6e00000-0xb6e0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb6e10000-0xb6e1cfff]
[    0.000000] PM: Registered nosave memory: [mem 0xb6e1d000-0xb6e40fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb6e41000-0xb6e83fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb7000000-0xb77fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb7800000-0xbf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] [mem 0xbfa00000-0xfed1bfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x93/0x558 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu @(____ptrval____) s147456 r8192 d28672 u1048576
[    0.000000] pcpu-alloc: s147456 r8192 d28672 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2025809
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.18.11-200.fc28.x86_64 root=/dev/mapper/fedora-root ro resume=/dev/mapper/fedora-swap rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=fr_FR.UTF-8
[    0.000000] Memory: 7985916K/8232500K available (12300K kernel code, 1618K rwdata, 4040K rodata, 2160K init, 1336K bss, 246584K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 37804 entries in 148 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=2.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 65792, nr_irqs: 440, preallocated irqs: 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180531
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.005000] tsc: Fast TSC calibration using PIT
[    0.006000] tsc: Detected 2594.070 MHz processor
[    0.006000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x25645a86d3f, max_idle_ns: 440795320789 ns
[    0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.14 BogoMIPS (lpj=2594070)
[    0.006000] pid_max: default: 32768 minimum: 301
[    0.007013] Security Framework initialized
[    0.007014] Yama: becoming mindful.
[    0.007018] SELinux:  Initializing.
[    0.007037] SELinux:  Starting in permissive mode
[    0.008429] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.009194] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.009239] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.009262] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.009478] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.009479] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.009483] mce: CPU supports 7 MCE banks
[    0.009491] CPU0: Thermal monitoring enabled (TM1)
[    0.009500] process: using mwait in idle threads
[    0.009503] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.009503] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.009505] Spectre V2 : Mitigation: Full generic retpoline
[    0.009506] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.009506] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.009507] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.009508] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.009602] Freeing SMP alternatives memory: 36K
[    0.011079] TSC deadline timer enabled
[    0.011082] smpboot: CPU0: Intel(R) Pentium(R) CPU G620 @ 2.60GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.011190] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.011212] ... version:                3
[    0.011213] ... bit width:              48
[    0.011213] ... generic registers:      8
[    0.011214] ... value mask:             0000ffffffffffff
[    0.011215] ... max period:             00007fffffffffff
[    0.011215] ... fixed-purpose events:   3
[    0.011216] ... event mask:             00000007000000ff
[    0.011254] Hierarchical SRCU implementation.
[    0.011942] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.011959] smp: Bringing up secondary CPUs ...
[    0.012000] x86: Booting SMP configuration:
[    0.012000] .... node  #0, CPUs:      #1
[    0.013028] smp: Brought up 1 node, 2 CPUs
[    0.013028] smpboot: Max logical packages: 1
[    0.013028] smpboot: Total of 2 processors activated (10376.28 BogoMIPS)
[    0.014250] devtmpfs: initialized
[    0.014250] x86/mm: Memory block size: 128MB
[    0.015034] PM: Registering ACPI NVS region [mem 0xb6c73000-0xb6cb9fff] (290816 bytes)
[    0.015040] PM: Registering ACPI NVS region [mem 0xb6e10000-0xb6e1cfff] (53248 bytes)
[    0.015042] PM: Registering ACPI NVS region [mem 0xb6e41000-0xb6e83fff] (274432 bytes)
[    0.015086] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.015086] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.015086] pinctrl core: initialized pinctrl subsystem
[    0.015161] RTC time: 18:16:59, date: 10/05/18
[    0.015286] NET: Registered protocol family 16
[    0.015392] audit: initializing netlink subsys (disabled)
[    0.015399] audit: type=2000 audit(1538763419.015:1): state=initialized audit_enabled=0 res=1
[    0.015399] cpuidle: using governor menu
[    0.015399] ACPI: bus type PCI registered
[    0.015399] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.015399] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.015399] PCI: not using MMCONFIG
[    0.015399] PCI: Using configuration type 1 for base access
[    0.015399] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.017135] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.017135] cryptd: max_cpu_qlen set to 1000
[    0.017135] ACPI: Added _OSI(Module Device)
[    0.017135] ACPI: Added _OSI(Processor Device)
[    0.017135] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.017135] ACPI: Added _OSI(Processor Aggregator Device)
[    0.017135] ACPI: Added _OSI(Linux-Dell-Video)
[    0.020808] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.022320] ACPI: Dynamic OEM Table Load:
[    0.022325] ACPI: SSDT 0xFFFF9990F6348800 000202 (v01 AMI    IST      00000001 MSFT 03000001)
[    0.022479] ACPI: Dynamic OEM Table Load:
[    0.022482] ACPI: SSDT 0xFFFF9990F5C40E40 000084 (v01 AMI    CST      00000001 MSFT 03000001)
[    0.022975] ACPI: Interpreter enabled
[    0.022992] ACPI: (supports S0 S3 S4 S5)
[    0.022993] ACPI: Using IOAPIC for interrupt routing
[    0.023020] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.023074] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.023079] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[    0.023460] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.023657] ACPI: Enabled 9 GPEs in block 00 to 3F
[    0.023721] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.028169] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.028174] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.028290] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[    0.028396] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.028645] PCI host bridge to bus 0000:00
[    0.028647] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.028649] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.028650] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.028651] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.028653] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.028654] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.028655] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xffffffff window]
[    0.028657] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.028665] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.028749] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[    0.028759] pci 0000:00:02.0: reg 0x10: [mem 0xfe000000-0xfe3fffff 64bit]
[    0.028765] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.028769] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.028864] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.028890] pci 0000:00:16.0: reg 0x10: [mem 0xfe608000-0xfe60800f 64bit]
[    0.028964] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.029043] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.029065] pci 0000:00:1a.0: reg 0x10: [mem 0xfe607000-0xfe6073ff]
[    0.029148] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.029225] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.029247] pci 0000:00:1b.0: reg 0x10: [mem 0xfe600000-0xfe603fff 64bit]
[    0.029320] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.029389] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.029473] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.029557] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.029641] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.029723] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.029806] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.029887] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.029970] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.030054] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.030077] pci 0000:00:1d.0: reg 0x10: [mem 0xfe606000-0xfe6063ff]
[    0.030160] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.030232] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[    0.030400] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[    0.030419] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.030426] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.030434] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.030442] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.030450] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.030458] pci 0000:00:1f.2: reg 0x24: [mem 0xfe605000-0xfe6057ff]
[    0.030498] pci 0000:00:1f.2: PME# supported from D3hot
[    0.030565] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.030584] pci 0000:00:1f.3: reg 0x10: [mem 0xfe604000-0xfe6040ff 64bit]
[    0.030604] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.030715] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.030785] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.030820] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.030853] pci 0000:02:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[    0.030875] pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[    0.030988] pci 0000:02:00.0: supports D1 D2
[    0.030989] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.031106] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.031110] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    0.031118] pci 0000:00:1c.1:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.031184] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.031236] pci 0000:03:00.0: reg 0x10: [mem 0xfe500000-0xfe507fff 64bit]
[    0.031439] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.031545] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.031551] pci 0000:00:1c.3:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.031614] pci 0000:04:00.0: [168c:002b] type 00 class 0x028000
[    0.031658] pci 0000:04:00.0: reg 0x10: [mem 0xfe400000-0xfe40ffff 64bit]
[    0.031810] pci 0000:04:00.0: supports D1
[    0.031811] pci 0000:04:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.031922] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.031928] pci 0000:00:1c.4:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.032453] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.032500] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.032546] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.032590] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.032635] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.032681] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.032726] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.032771] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.032891] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.032891] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.032891] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.032891] vgaarb: loaded
[    0.033030] SCSI subsystem initialized
[    0.033040] libata version 3.00 loaded.
[    0.033040] ACPI: bus type USB registered
[    0.033041] usbcore: registered new interface driver usbfs
[    0.033048] usbcore: registered new interface driver hub
[    0.033056] usbcore: registered new device driver usb
[    0.033075] pps_core: LinuxPPS API ver. 1 registered
[    0.033075] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.033078] PTP clock support registered
[    0.033112] EDAC MC: Ver: 3.0.0
[    0.033190] PCI: Using ACPI for IRQ routing
[    0.039694] PCI: pci_cache_line_size set to 64 bytes
[    0.039744] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.039745] e820: reserve RAM buffer [mem 0xb6c73000-0xb7ffffff]
[    0.039747] e820: reserve RAM buffer [mem 0xb6e00000-0xb7ffffff]
[    0.039748] e820: reserve RAM buffer [mem 0xb7000000-0xb7ffffff]
[    0.039749] e820: reserve RAM buffer [mem 0x23fe00000-0x23fffffff]
[    0.039841] NetLabel: Initializing
[    0.039842] NetLabel:  domain hash size = 128
[    0.039842] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.039857] NetLabel:  unlabeled traffic allowed by default
[    0.039861] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.039861] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.041016] clocksource: Switched to clocksource tsc-early
[    0.053752] VFS: Disk quotas dquot_6.6.0
[    0.053767] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.053830] pnp: PnP ACPI init
[    0.053967] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[    0.053969] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.053972] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.053973] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.053975] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.053980] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.054063] system 00:01: [io  0x0a00-0x0a3f] has been reserved
[    0.054067] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.054333] pnp 00:02: Plug and Play ACPI device, IDs NTN0530 (active)
[    0.054354] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.054402] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.054406] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.054566] system 00:05: [io  0x0400-0x0453] has been reserved
[    0.054568] system 00:05: [io  0x0458-0x047f] has been reserved
[    0.054570] system 00:05: [io  0x1180-0x119f] has been reserved
[    0.054571] system 00:05: [io  0x0500-0x057f] has been reserved
[    0.054573] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.054575] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.054577] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.054579] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.054582] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.054630] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.054634] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.054811] pnp: PnP ACPI: found 7 devices
[    0.060501] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.060557] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.060570] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.060573] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
[    0.060580] pci 0000:00:1c.1:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.060586] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.060591] pci 0000:00:1c.3:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.060599] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.060604] pci 0000:00:1c.4:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.060613] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.060614] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.060616] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.060617] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.060618] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.060620] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.060621] pci_bus 0000:00: resource 10 [mem 0xbfa00000-0xffffffff window]
[    0.060623] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.060624] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.060626] pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
[    0.060627] pci_bus 0000:04: resource 1 [mem 0xfe400000-0xfe4fffff]
[    0.060694] NET: Registered protocol family 2
[    0.060834] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.060869] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.060998] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.061141] TCP: Hash tables configured (established 65536 bind 65536)
[    0.061180] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.061207] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.061296] NET: Registered protocol family 1
[    0.061322] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[    0.061337] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.061735] PCI: CLS 64 bytes, default 64
[    0.061784] Unpacking initramfs...
[    0.404158] Freeing initrd memory: 23020K
[    0.404193] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.404196] software IO TLB [mem 0xb2c73000-0xb6c73000] (64MB) mapped at [(____ptrval____)-(____ptrval____)]
[    0.405016] Initialise system trusted keyrings
[    0.405025] Key type blacklist registered
[    0.405052] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.406218] zbud: loaded
[    0.406648] pstore: using deflate compression
[    0.406695] SELinux:  Registering netfilter hooks
[    0.591248] alg: No test for 842 (842-generic)
[    0.591269] alg: No test for 842 (842-scomp)
[    0.596485] NET: Registered protocol family 38
[    0.596488] Key type asymmetric registered
[    0.596490] Asymmetric key parser 'x509' registered
[    0.596540] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.596562] io scheduler noop registered
[    0.596563] io scheduler deadline registered
[    0.596606] io scheduler cfq registered (default)
[    0.596607] io scheduler mq-deadline registered
[    0.596653] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.597314] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[    0.597337] pcieport 0000:00:1c.1: Signaling PME with IRQ 25
[    0.597358] pcieport 0000:00:1c.3: Signaling PME with IRQ 26
[    0.597380] pcieport 0000:00:1c.4: Signaling PME with IRQ 27
[    0.597403] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.597418] intel_idle: MWAIT substates: 0x1120
[    0.597419] intel_idle: v0.4.1 model 0x2A
[    0.597483] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.597555] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.597564] ACPI: Power Button [PWRB]
[    0.597594] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.597607] ACPI: Power Button [PWRF]
[    0.598042] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.599502] Non-volatile memory driver v1.3
[    0.599523] Linux agpgart interface v0.103
[    0.599743] ahci 0000:00:1f.2: version 3.0
[    0.599872] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    0.599875] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
[    0.602269] scsi host0: ahci
[    0.602358] scsi host1: ahci
[    0.602429] scsi host2: ahci
[    0.602489] scsi host3: ahci
[    0.602520] ata1: SATA max UDMA/133 abar m2048@0xfe605000 port 0xfe605100 irq 28
[    0.602522] ata2: SATA max UDMA/133 abar m2048@0xfe605000 port 0xfe605180 irq 28
[    0.602523] ata3: DUMMY
[    0.602524] ata4: DUMMY
[    0.602613] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.602616] ehci-pci: EHCI PCI platform driver
[    0.602704] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.602743] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.602757] ehci-pci 0000:00:1a.0: debug port 2
[    0.606667] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.606678] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe607000
[    0.613022] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.613091] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    0.613092] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.613094] usb usb1: Product: EHCI Host Controller
[    0.613095] usb usb1: Manufacturer: Linux 4.18.11-200.fc28.x86_64 ehci_hcd
[    0.613096] usb usb1: SerialNumber: 0000:00:1a.0
[    0.613262] hub 1-0:1.0: USB hub found
[    0.613270] hub 1-0:1.0: 2 ports detected
[    0.613442] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.613522] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.613533] ehci-pci 0000:00:1d.0: debug port 2
[    0.617438] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.617449] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe606000
[    0.624022] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.624085] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    0.624087] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.624088] usb usb2: Product: EHCI Host Controller
[    0.624090] usb usb2: Manufacturer: Linux 4.18.11-200.fc28.x86_64 ehci_hcd
[    0.624091] usb usb2: SerialNumber: 0000:00:1d.0
[    0.624247] hub 2-0:1.0: USB hub found
[    0.624254] hub 2-0:1.0: 2 ports detected
[    0.624353] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.624358] ohci-pci: OHCI PCI platform driver
[    0.624366] uhci_hcd: USB Universal Host Controller Interface driver
[    0.624438] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.624519] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[    0.628915] xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000
[    0.629132] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    0.629134] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.629135] usb usb3: Product: xHCI Host Controller
[    0.629137] usb usb3: Manufacturer: Linux 4.18.11-200.fc28.x86_64 xhci-hcd
[    0.629138] usb usb3: SerialNumber: 0000:03:00.0
[    0.629309] hub 3-0:1.0: USB hub found
[    0.629321] hub 3-0:1.0: 2 ports detected
[    0.629425] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.629499] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[    0.629502] xhci_hcd 0000:03:00.0: Host supports USB 3.0  SuperSpeed
[    0.629528] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.629549] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[    0.629551] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.629552] usb usb4: Product: xHCI Host Controller
[    0.629554] usb usb4: Manufacturer: Linux 4.18.11-200.fc28.x86_64 xhci-hcd
[    0.629555] usb usb4: SerialNumber: 0000:03:00.0
[    0.629643] hub 4-0:1.0: USB hub found
[    0.629652] hub 4-0:1.0: 2 ports detected
[    0.629752] usbcore: registered new interface driver usbserial_generic
[    0.629757] usbserial: USB Serial support registered for generic
[    0.629778] i8042: PNP: No PS/2 controller found.
[    0.629779] i8042: Probing ports directly.
[    0.632653] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.632657] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.632758] mousedev: PS/2 mouse device common for all mice
[    0.632859] rtc_cmos 00:03: RTC can wake from S4
[    0.633005] rtc_cmos 00:03: registered as rtc0
[    0.633007] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.633051] device-mapper: uevent: version 1.0.3
[    0.633107] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    0.633148] intel_pstate: Intel P-state driver initializing
[    0.633675] hidraw: raw HID events driver (C) Jiri Kosina
[    0.633724] usbcore: registered new interface driver usbhid
[    0.633724] usbhid: USB HID core driver
[    0.633832] drop_monitor: Initializing network drop monitor service
[    0.633968] Initializing XFRM netlink socket
[    0.634139] NET: Registered protocol family 10
[    0.637588] Segment Routing with IPv6
[    0.637622] mip6: Mobile IPv6
[    0.637624] NET: Registered protocol family 17
[    0.637919] RAS: Correctable Errors collector initialized.
[    0.637955] microcode: sig=0x206a7, pf=0x2, revision=0x2e
[    0.638000] microcode: Microcode Update Driver: v2.2.
[    0.638022] sched_clock: Marking stable (638003726, 0)->(872072423, -234068697)
[    0.638237] registered taskstats version 1
[    0.638248] Loading compiled-in X.509 certificates
[    0.688111] Loaded X.509 cert 'Fedora kernel signing key: bfde88a501fc56acb82fa1f82f63f65cd9b6a346'
[    0.688133] zswap: loaded using pool lzo/zbud
[    0.690081] Key type big_key registered
[    0.691785] Key type encrypted registered
[    0.691794] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.691798] ima: Allocated hash algorithm: sha1
[    0.692141]   Magic number: 6:30:291
[    0.692168] tty tty24: hash matches
[    0.692244] rtc_cmos 00:03: setting system clock to 2018-10-05 18:17:00 UTC (1538763420)
[    0.910030] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.910053] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.912522] ata1.00: ATA-8: WDC WD10EARX-22N0YB0, 51.0AB51, max UDMA/133
[    0.912525] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.913901] ata2.00: ATAPI: TSSTcorp CDDVDW SN-208AB, TM00, max UDMA/100
[    0.915072] ata1.00: configured for UDMA/133
[    0.915365] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EARX-22N AB51 PQ: 0 ANSI: 5
[    0.915695] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.915750] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    0.915752] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.915778] sd 0:0:0:0: [sda] Write Protect is off
[    0.915781] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.915812] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.920016] ata2.00: configured for UDMA/100
[    0.924848] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208AB  TM00 PQ: 0 ANSI: 5
[    0.938023] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.946022] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.960713]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[    0.961163] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.965261] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.965263] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.965428] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    0.965484] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    0.967455] Freeing unused kernel image memory: 2160K
[    0.971016] Write protecting the kernel read-only data: 18432k
[    0.971573] Freeing unused kernel image memory: 2012K
[    0.971636] Freeing unused kernel image memory: 56K
[    0.973452] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    0.982628] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.982628] x86/mm: Checking user space page tables
[    0.989192] usb 4-1: New USB device found, idVendor=0480, idProduct=b207, bcdDevice= 3.15
[    0.989194] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    0.989196] usb 4-1: Product: External USB 3.0
[    0.989198] usb 4-1: Manufacturer: TOSHIBA
[    0.989199] usb 4-1: SerialNumber: 20170214007084F
[    0.992944] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.992950] rodata_test: all tests were successful
[    1.002287] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    1.014149] systemd[1]: Detected architecture x86-64.
[    1.014153] systemd[1]: Running in initial RAM disk.
[    1.016226] systemd[1]: Set hostname to <saddak_msi>.
[    1.068368] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    1.068371] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.068622] hub 1-1:1.0: USB hub found
[    1.068719] hub 1-1:1.0: 4 ports detected
[    1.074350] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    1.074353] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.074531] hub 2-1:1.0: USB hub found
[    1.074610] hub 2-1:1.0: 6 ports detected
[    1.075071] random: systemd: uninitialized urandom read (16 bytes read)
[    1.075094] systemd[1]: Reached target Swap.
[    1.075207] random: systemd: uninitialized urandom read (16 bytes read)
[    1.075270] systemd[1]: Listening on Journal Audit Socket.
[    1.075287] random: systemd: uninitialized urandom read (16 bytes read)
[    1.075388] systemd[1]: Listening on Journal Socket.
[    1.076970] systemd[1]: Starting Setup Virtual Console...
[    1.077957] systemd[1]: Starting Load Kernel Modules...
[    1.078021] systemd[1]: Reached target Slices.
[    1.111448] usb 4-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[    1.118605] audit: type=1130 audit(1538763420.924:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.123873] audit: type=1130 audit(1538763420.929:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.123888] usb 4-2: New USB device found, idVendor=1058, idProduct=1048, bcdDevice=10.22
[    1.123891] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[    1.123892] usb 4-2: Product: Elements 1048
[    1.123894] usb 4-2: Manufacturer: Western Digital
[    1.123895] usb 4-2: SerialNumber: 575831314136333737343739
[    1.151796] audit: type=1130 audit(1538763420.957:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.205858] audit: type=1130 audit(1538763421.011:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.205861] audit: type=1131 audit(1538763421.011:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.237428] audit: type=1130 audit(1538763421.043:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.272525] audit: type=1130 audit(1538763421.078:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.286313] audit: type=1130 audit(1538763421.092:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.294338] usb-storage 4-1:1.0: USB Mass Storage device detected
[    1.294878] scsi host4: usb-storage 4-1:1.0
[    1.294953] usb-storage 4-2:1.0: USB Mass Storage device detected
[    1.296618] scsi host5: usb-storage 4-2:1.0
[    1.296681] usbcore: registered new interface driver usb-storage
[    1.300610] usbcore: registered new interface driver uas
[    1.345021] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[    1.345040] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
[    1.364901] audit: type=1130 audit(1538763421.170:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.426978] usb 2-1.1: New USB device found, idVendor=04f2, idProduct=0976, bcdDevice= 1.31
[    1.426981] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.426983] usb 2-1.1: Product: Wireless Device
[    1.426984] usb 2-1.1: Manufacturer: Chicony
[    1.428687] input: Chicony Wireless Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:04F2:0976.0001/input/input5
[    1.440021] tsc: Refined TSC clocksource calibration: 2594.107 MHz
[    1.440026] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647d583cf, max_idle_ns: 440795304232 ns
[    1.440038] clocksource: Switched to clocksource tsc
[    1.443858] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.444432] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl, 8c:89:a5:9f:96:e0, XID 2c900800, IRQ 32
[    1.444434] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.478856] usb 1-1.3: New USB device found, idVendor=5986, idProduct=0241, bcdDevice= 3.08
[    1.478859] usb 1-1.3: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[    1.478861] usb 1-1.3: Product: BisonCam, NB Pro
[    1.478862] usb 1-1.3: Manufacturer: BISON Corporation
[    1.480153] hid-generic 0003:04F2:0976.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony Wireless Device] on usb-0000:00:1d.0-1.1/input0
[    1.482348] input: Chicony Wireless Device Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:04F2:0976.0002/input/input6
[    1.516129] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.534652] input: Chicony Wireless Device System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:04F2:0976.0002/input/input7
[    1.534705] input: Chicony Wireless Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:04F2:0976.0002/input/input8
[    1.534791] hid-generic 0003:04F2:0976.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Chicony Wireless Device] on usb-0000:00:1d.0-1.1/input1
[    1.536430] input: Chicony Wireless Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.2/0003:04F2:0976.0003/input/input9
[    1.536515] hid-generic 0003:04F2:0976.0003: input,hidraw2: USB HID v1.11 Mouse [Chicony Wireless Device] on usb-0000:00:1d.0-1.1/input2
[    1.580016] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[    1.600014] usb 2-1.3: new full-speed USB device number 4 using ehci-pci
[    1.601093] random: fast init done
[    1.685848] usb 1-1.4: New USB device found, idVendor=0408, idProduct=3008, bcdDevice= 2.10
[    1.685850] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[    1.685852] usb 1-1.4: Product: OpticalTouchScreen
[    1.685854] usb 1-1.4: Manufacturer: Quanta
[    1.685855] usb 1-1.4: SerialNumber: 0000
[    1.688762] [drm] Replacing VGA console driver
[    1.688998] input: Quanta OpticalTouchScreen Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:0408:3008.0004/input/input10
[    1.689184] input: Quanta OpticalTouchScreen Touchscreen as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:0408:3008.0004/input/input11
[    1.689195] Console: switching to colour dummy device 80x25
[    1.689280] hid-generic 0003:0408:3008.0004: input,hiddev97,hidraw3: USB HID v1.10 Mouse [Quanta OpticalTouchScreen] on usb-0000:00:1a.0-1.4/input0
[    1.691516] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.691517] [drm] Driver supports precise vblank timestamp query.
[    1.692243] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.696407] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
[    1.698973] usb 2-1.3: New USB device found, idVendor=413c, idProduct=1003, bcdDevice= 1.00
[    1.698975] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.698977] usb 2-1.3: Product: Dell USB Keyboard Hub
[    1.698978] usb 2-1.3: Manufacturer: Dell
[    1.699741] hub 2-1.3:1.0: USB hub found
[    1.699847] hub 2-1.3:1.0: 3 ports detected
[    1.712074] input: Quanta OpticalTouchScreen as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:0408:3008.0004/input/input13
[    1.712194] hid-multitouch 0003:0408:3008.0004: input,hiddev97,hidraw3: USB HID v1.10 Mouse [Quanta OpticalTouchScreen] on usb-0000:00:1a.0-1.4/input0
[    1.827357] fbcon: inteldrmfb (fb0) is primary device
[    1.907688] Console: switching to colour frame buffer device 170x48
[    1.927082] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.979014] usb 2-1.3.1: new full-speed USB device number 5 using ehci-pci
[    2.058093] usb 2-1.3.1: New USB device found, idVendor=413c, idProduct=2010, bcdDevice= 1.00
[    2.058105] usb 2-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.058106] usb 2-1.3.1: Product: Dell USB Keyboard Hub
[    2.058108] usb 2-1.3.1: Manufacturer: Dell
[    2.059313] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.1/2-1.3.1:1.0/0003:413C:2010.0005/input/input14
[    2.111258] hid-generic 0003:413C:2010.0005: input,hidraw4: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.0-1.3.1/input0
[    2.112442] input: Dell Dell USB Keyboard Hub Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.1/2-1.3.1:1.1/0003:413C:2010.0006/input/input15
[    2.164085] input: Dell Dell USB Keyboard Hub System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.1/2-1.3.1:1.1/0003:413C:2010.0006/input/input16
[    2.164140] hid-generic 0003:413C:2010.0006: input,hidraw5: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.0-1.3.1/input1
[    2.192752] random: crng init done
[    2.192754] random: 7 urandom warning(s) missed due to ratelimiting
[    2.336364] scsi 5:0:0:0: Direct-Access     WD       Elements 1048    1022 PQ: 0 ANSI: 6
[    2.336635] sd 5:0:0:0: Attached scsi generic sg2 type 0
[    2.336806] sd 5:0:0:0: [sdb] 1953519616 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.337560] sd 5:0:0:0: [sdb] Write Protect is off
[    2.337563] sd 5:0:0:0: [sdb] Mode Sense: 47 00 10 08
[    2.337945] sd 5:0:0:0: [sdb] No Caching mode page found
[    2.337976] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[    2.339108] scsi 4:0:0:0: Direct-Access     TOSHIBA  External USB 3.0 5438 PQ: 0 ANSI: 6
[    2.339383] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    2.341478] sd 4:0:0:0: [sdc] 1953525164 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.341834] sd 4:0:0:0: [sdc] Write Protect is off
[    2.341836] sd 4:0:0:0: [sdc] Mode Sense: 23 00 00 00
[    2.342173] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.343071]  sdb: sdb1 sdb2
[    2.344338] sd 5:0:0:0: [sdb] Attached SCSI disk
[    2.521857]  sdc: sdc1 sdc2
[    2.524465] sd 4:0:0:0: [sdc] Attached SCSI disk
[    3.305707] PM: Image not found (code -22)
[    3.449538] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    3.983063] systemd-journald[165]: Received SIGTERM from PID 1 (systemd).
[    4.234791] systemd: 18 output lines suppressed due to ratelimiting
[    5.016144] kauditd_printk_skb: 36 callbacks suppressed
[    5.016146] audit: type=1404 audit(1538763424.822:47): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1
[    5.175343] SELinux: 32768 avtab hash slots, 115618 rules.
[    5.196025] SELinux: 32768 avtab hash slots, 115618 rules.
[    5.576455] SELinux:  8 users, 14 roles, 5135 types, 322 bools, 1 sens, 1024 cats
[    5.576459] SELinux:  129 classes, 115618 rules
[    5.582495] SELinux:  Class bpf not defined in policy.
[    5.582497] SELinux:  Class xdp_socket not defined in policy.
[    5.582497] SELinux: the above unknown classes and permissions will be allowed
[    5.582504] SELinux:  policy capability network_peer_controls=1
[    5.582505] SELinux:  policy capability open_perms=1
[    5.582505] SELinux:  policy capability extended_socket_class=1
[    5.582506] SELinux:  policy capability always_check_network=0
[    5.582506] SELinux:  policy capability cgroup_seclabel=1
[    5.582507] SELinux:  policy capability nnp_nosuid_transition=1
[    5.582508] SELinux:  Completing initialization.
[    5.582508] SELinux:  Setting up existing superblocks.
[    5.601688] audit: type=1403 audit(1538763425.407:48): auid=4294967295 ses=4294967295 lsm=selinux res=1
[    5.604152] systemd[1]: Successfully loaded SELinux policy in 599.640ms.
[    5.732537] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[    5.792130] systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 33.388ms.
[    5.825788] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    5.837157] systemd[1]: Detected architecture x86-64.
[    5.849643] systemd[1]: Set hostname to <saddak_msi>.
[    8.275033] audit: type=1130 audit(1538759828.081:49): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.275038] audit: type=1131 audit(1538759828.082:50): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.275802] systemd[1]: Stopped Switch Root.
[    8.276031] audit: type=1130 audit(1538759828.082:51): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.276055] audit: type=1131 audit(1538759828.083:52): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.276164] systemd[1]: Received SIGRTMIN+20 from PID 323 (plymouthd).
[    8.276244] systemd[1]: systemd-journald.service: Service has no hold-off time, scheduling restart.
[    8.276365] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[    8.276389] systemd[1]: Stopped Journal Service.
[    8.276495] audit: type=1130 audit(1538759828.083:53): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.276511] audit: type=1131 audit(1538759828.083:54): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.277947] systemd[1]: Starting Journal Service...
[    8.281890] systemd[1]: Listening on Process Core Dump Socket.
[    8.395659] audit: type=1130 audit(1538759828.202:55): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.439272] EXT4-fs (dm-0): re-mounted. Opts: (null)
[    8.441871] audit: type=1130 audit(1538759828.248:56): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.514939] systemd-journald[537]: File /run/log/journal/e77681cab79a4e4e94fe60151fd61653/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    8.732207] systemd-journald[537]: Received request to flush runtime journal from PID 1
[    9.659648] vboxdrv: loading out-of-tree module taints kernel.
[    9.659839] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    9.664129] vboxdrv: Found 2 processor cores
[    9.680440] vboxdrv: TSC mode is Invariant, tentative frequency 2594106860 Hz
[    9.680441] vboxdrv: Successfully loaded version 5.2.18_RPMFusion (interface 0x00290001)
[    9.761041] VBoxNetFlt: Successfully started.
[    9.846142] VBoxNetAdp: Successfully started.
[    9.916726] VBoxPciLinuxInit
[    9.916735] vboxpci: IOMMU not found (not registered)
[   10.161688] kauditd_printk_skb: 6 callbacks suppressed
[   10.161691] audit: type=1130 audit(1538759829.968:63): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=fedora-readonly comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   10.309747] audit: type=1130 audit(1538759830.116:64): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   10.575941] audit: type=1130 audit(1538759830.382:65): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   10.890479] audit: type=1130 audit(1538759830.697:66): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.376836] audit: type=1130 audit(1538759832.183:67): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.565265] audit: type=1130 audit(1538759832.372:68): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.165399] nuvoton-cir 00:02: Wake PNP Port not valid!
[   13.165408] nuvoton-cir: probe of 00:02 failed with error -22
[   13.298379] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   13.299108] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   13.642612] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   13.642613] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   13.642614] RAPL PMU: hw unit of domain package 2^-16 Joules
[   13.642615] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   13.680734] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   13.998298] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   14.235311] ath: EEPROM regdomain: 0x60
[   14.235313] ath: EEPROM indicates we should expect a direct regpair map
[   14.235314] ath: Country alpha2 being used: 00
[   14.235315] ath: Regpair used: 0x60
[   14.264798] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   14.265159] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffb09a811c0000, irq=16
[   14.314104] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   14.314107] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   14.314109] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.314110] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   14.314111] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   14.314113] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   14.314114] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   14.390071] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   14.390185] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[   14.390249] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[   14.649125] media: Linux media interface: v0.10
[   14.684915] videodev: Linux video capture interface: v2.00
[   14.849688] intel_rapl: Found RAPL domain package
[   14.849689] intel_rapl: Found RAPL domain core
[   14.849690] intel_rapl: Found RAPL domain uncore
[   14.849695] intel_rapl: RAPL package 0 domain package locked by BIOS
[   15.194726] input: MSI WMI hotkeys as /devices/virtual/input/input21
[   15.213579] iTCO_vendor_support: vendor-support=0
[   15.219321] gpio_ich: GPIO from 436 to 511 on gpio_ich
[   15.330775] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   15.330822] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[   15.330984] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   15.410525] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0241)
[   15.473335] uvcvideo 1-1.3:1.0: Entity type for entity Extension 2 was not initialized!
[   15.473339] uvcvideo 1-1.3:1.0: Entity type for entity Extension 5 was not initialized!
[   15.473341] uvcvideo 1-1.3:1.0: Entity type for entity Processing 3 was not initialized!
[   15.473343] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
[   15.473458] input: BisonCam, NB Pro: BisonCam, NB  as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input22
[   15.473590] usbcore: registered new interface driver uvcvideo
[   15.473591] USB Video Class driver (1.1.1)
[   16.459568] audit: type=1130 audit(1538759836.266:69): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.495820] Adding 8146940k swap on /dev/mapper/fedora-swap.  Priority:-2 extents:1 across:8146940k FS
[   16.618107] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0
[   16.641317] audit: type=1130 audit(1538759836.448:70): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.644076] audit: type=1130 audit(1538759836.450:71): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.060673] audit: type=1130 audit(1538759836.867:72): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.253237] audit: type=1130 audit(1538759837.060:73): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.253241] audit: type=1131 audit(1538759837.060:74): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.610621] audit: type=1130 audit(1538759837.417:75): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-e0c27817\x2dcad0\x2d4f04\x2d84bf\x2d772c926da7eb comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.723186] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   17.752708] audit: type=1130 audit(1538759837.559:76): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-pvscan@8:8 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.851103] audit: type=1130 audit(1538759837.658:77): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-mapper-fedora\x2dhome comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.950831] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[   18.014769] audit: type=1130 audit(1538759837.821:78): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   18.522477] RPC: Registered named UNIX socket transport module.
[   18.522479] RPC: Registered udp transport module.
[   18.522479] RPC: Registered tcp transport module.
[   18.522480] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   38.158611] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   42.748173] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   42.958197] r8169 0000:02:00.0 enp2s0: link down
[   42.958294] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   43.002469] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   43.017827] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   43.040235] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   44.208088] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   54.921612] fuse init (API version 7.27)
[  116.695951] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[  117.664315] wlp4s0: authenticate with a0:63:91:d1:2c:78
[  117.684930] wlp4s0: send auth to a0:63:91:d1:2c:78 (try 1/3)
[  117.687133] wlp4s0: authenticated
[  117.688078] wlp4s0: associate with a0:63:91:d1:2c:78 (try 1/3)
[  117.694080] wlp4s0: RX AssocResp from a0:63:91:d1:2c:78 (capab=0x411 status=0 aid=1)
[  117.694236] wlp4s0: associated
[  117.785970] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
T’inquiète pas, Linux est bavard au boot.
2 minutes avec tes disques , normal et ta connexion wifi est pas terrible.
Désactive pour voir ipv6
Ce qui doit t'inquieté c'est de ne pas avoir ou pas assez d'info. Surtout au boot...
Sympa ton site web vindicators.
Ton expérience sur l'empaquetage et la construction des SPEC
j'utilise presque tous les logiciels que toi (linux, android, windows)
Par contre pour mes serveurs nextcloud et autres qui voient passer 2 à 3 Go/jour, j'utilise des Raspberry.
Ma facture EDF s'en ressent. (10 watts par carte qui ont toutes un DD 2.5p de 1To)
:pint:
saddak wrote:Bonjour,

Suite à un erreur récurrente de démarrage apparemment sans conséquence, j'ai consulté le boot.log
Bonjour,

Pourrais-tu en dire davantage sur cette erreur obtenue au démarrage ?

Je ne vois que ces lignes qui sont suceptibles de générer une notification :
[    9.659648] vboxdrv: loading out-of-tree module taints kernel.
[    9.659839] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
— inxto
Pourrais-tu en dire davantage sur cette erreur obtenue au démarrage ?
Bonsoir et merci de ton intervention.

l'erreur semble t il assez fréquente est :

[ Failed to Start Load Kernel Modules]
see 'systemctl status systemd-module-load_service'
antbel wrote:T’inquiète pas, Linux est bavard au boot.
2 minutes avec tes disques , normal et ta connexion wifi est pas terrible.
Désactive pour voir ipv6

Merci ta réponse .
Lorsque je vais dans mon routeur, je vois que ipv6 est déjà désactivé par défaut....
Comment peut il être actif niveau programme network ?
ifconfig
enp2s0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 8c:89:a5:9f:96:e0  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Boucle locale)
        RX packets 124  bytes 9768 (9.5 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 124  bytes 9768 (9.5 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlp4s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.128  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 fe80::e765:15f:bd8b:8dab  prefixlen 64  scopeid 0x20<link>
        ether 00:08:ca:43:5b:58  txqueuelen 1000  (Ethernet)
        RX packets 3870  bytes 3590414 (3.4 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 2554  bytes 649630 (634.4 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
C'est vrai , j'ai des problèmes de connexion avec le FAI en ce moment...

Ah j'enrage d'être aussi nul en info!
Dans les logs rien d'anormal, la machine met 54s pour booter, et perd un temps fou pour s'authentifier sur l'access point wifi:
[   54.921612] fuse init (API version 7.27)
[  116.695951] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[  117.664315] wlp4s0: authenticate with a0:63:91:d1:2c:78
Ce qui est pas trop en rapport avec l'ipv6... Mais je suppose que ça n'empêche pas la machine d'être utilisable avant ça. Mais les logs ne montrent pas quand la machine est vraiment utilisable.

Que donne
systemd-analyze blame
?

et
systemd-analyze
?
C'est pas au niveau du routeur mais au niveau de ta carte wifi que tu dois désactiver l'ipv6.
Sous Gnome, tu vas dans Paramètres, Wifi, et cherche désactiver ipv6.
Bonjour, tu peux faire la modif suivante si, en graphique tu n'arrives pas à trouver les bonnes cases à cocher
à faire en terminal

Dans un premier temps tu vérifies ton fichier /etc/sysctl.conf
en faisant :
$ cat /etc/sysctl.conf
Tu devrais avoir ceci:
# sysctl settings are defined through files in
# /usr/lib/sysctl.d/, /run/sysctl.d/, and /etc/sysctl.d/.
#
# Vendors settings live in /usr/lib/sysctl.d/.
# To override a whole file, create a new file with the same in
# /etc/sysctl.d/ and put new settings there. To override
# only specific settings, add a file with a lexically later
# name in /etc/sysctl.d/ and put new settings there.
#
# For more information, see sysctl.conf(5) and sysctl.d(5).
Premiere chose à faire , c'est sauvegarder ce fichier (toujours à faire en root: d'ou le su -)
Pour rappel , le $ indique que tu est en user et le : # que tu es en root
Donc,
$ su -
# cp /etc/sysctl.conf /etc/sysctl.conf.original
comme cela tu pourras revenir en arrière facilement avec ce fichier sauvegardé. en faisant # cp /etc/sysctl.conf.original /etc/sysctl.conf

Maintenant tu peux faire la modif suivante si, en graphique tu n'arrives pas à trouver les bonnes cases à cocher.
en rajoutant à la fin du fichier /etc/sysctl.conf avec un copier/coller ou Ctrl+c puis Ctrl+v
$ su -
# nano /etc/sysctl.conf

# désactivation du support pour les interfaces actuelles
net.ipv6.conf.all.disable_ipv6 = 1
 
# désactivation du support de l’autoconfiguration
net.ipv6.conf.all.autoconf = 0
 
# désactivation du support par défaut pour les nouvelles interfaces
net.ipv6.conf.default.disable_ipv6 = 1
 
# et de l'autoconfiguration 
net.ipv6.conf.default.autoconf = 0
Pour valider tes modifs, il faut les sauvegarder en faisant: Ctrl+x et répondre par oui aux questions posées

ton fichier devrait ressembler à cela en refaisant un $ cat /etc/sysctl.conf

# sysctl settings are defined through files in
# /usr/lib/sysctl.d/, /run/sysctl.d/, and /etc/sysctl.d/.
#
# Vendors settings live in /usr/lib/sysctl.d/.
# To override a whole file, create a new file with the same in
# /etc/sysctl.d/ and put new settings there. To override
# only specific settings, add a file with a lexically later
# name in /etc/sysctl.d/ and put new settings there.
#
# For more information, see sysctl.conf(5) and sysctl.d(5).
# désactivation du support pour les interfaces actuelles
net.ipv6.conf.all.disable_ipv6 = 1
 
# désactivation du support de l’autoconfiguration
net.ipv6.conf.all.autoconf = 0
 
# désactivation du support par défaut pour les nouvelles interfaces
net.ipv6.conf.default.disable_ipv6 = 1
 
# et de l'autoconfiguration 
net.ipv6.conf.default.autoconf = 0
Bon dimanche
madko wrote:Dans les logs rien d'anormal, la machine met 54s pour booter, et perd un temps fou pour s'authentifier sur l'access point wifi:
[   54.921612] fuse init (API version 7.27)
[  116.695951] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[  117.664315] wlp4s0: authenticate with a0:63:91:d1:2c:78
Ce qui est pas trop en rapport avec l'ipv6... Mais je suppose que ça n'empêche pas la machine d'être utilisable avant ça. Mais les logs ne montrent pas quand la machine est vraiment utilisable.

Que donne
systemd-analyze blame
?

et
systemd-analyze
?
Bonjour,
systemd-analyze blame
         19.618s firewalld.service
         19.556s plymouth-quit-wait.service
         18.958s udisks2.service
         16.692s php-fpm.service
         16.168s akmods.service
         15.045s ModemManager.service
         14.937s unbound-anchor.service
         14.467s accounts-daemon.service
         13.040s NetworkManager-wait-online.service
         11.117s cups.service
         10.532s httpd.service
          7.932s lvm2-monitor.service
          7.305s chronyd.service
          7.257s dev-mapper-fedora\x2droot.device
          7.166s systemd-udev-settle.service
          6.853s gssproxy.service
          6.732s rsyslog.service
          6.713s polkit.service
          6.696s systemd-logind.service
          6.390s abrtd.service
          6.254s rtkit-daemon.service
          6.016s avahi-daemon.service
          6.015s lm_sensors.service
          5.633s livesys-late.service
          5.132s lightdm.service
          4.353s initrd-switch-root.service
          3.122s systemd-journal-flush.service
          2.560s sshd.service
          1.891s systemd-udevd.service
          1.863s dracut-initqueue.service
          1.492s systemd-tmpfiles-setup-dev.service
          1.414s NetworkManager.service
          1.392s wpa_supplicant.service
          1.364s rpc-statd-notify.service
          1.324s systemd-modules-load.service
           971ms fedora-readonly.service
           807ms dmraid-activation.service
           806ms lvm2-pvscan@8:8.service
           787ms systemd-vconsole-setup.service
           710ms systemd-sysctl.service
           694ms livesys.service
           667ms systemd-random-seed.service
           588ms auditd.service
           483ms dev-mapper-fedora\x2dswap.swap
           405ms upower.service
           380ms systemd-fsck@dev-disk-by\x2duuid-e0c27817\x2dcad0\x2d4f04\x2d8>
           322ms fedora-import-state.service
           313ms systemd-udev-trigger.service
           266ms dev-hugepages.mount
           255ms systemd-fsck@dev-mapper-fedora\x2dhome.service
           253ms systemd-remount-fs.service
 systemd-analyze
Startup finished in 1.009s (kernel) + 3.874s (initrd) + 56.889s (userspace) = 1min 1.773s
graphical.target reached after 56.876s in userspace

Il y a quelques éléments que je pige mais pas mal sont encore de l'hébreu.

Merci.
Refuznik wrote:C'est pas au niveau du routeur mais au niveau de ta carte wifi que tu dois désactiver l'ipv6.
Sous Gnome, tu vas dans Paramètres, Wifi, et cherche désactiver ipv6.

Bonjour,

Je suis sous MATE mais j'ai trouvé l'équivalent et je viens de désactivé l'IPV6 sur mon wi-fi.

Merci.
antbel wrote:Bonjour, tu peux faire la modif suivante si, en graphique tu n'arrives pas à trouver les bonnes cases à cocher
à faire en terminal

Dans un premier temps tu vérifies ton fichier /etc/sysctl.conf
en faisant :
$ cat /etc/sysctl.conf
Tu devrais avoir ceci:
# sysctl settings are defined through files in
# /usr/lib/sysctl.d/, /run/sysctl.d/, and /etc/sysctl.d/.
#
# Vendors settings live in /usr/lib/sysctl.d/.
# To override a whole file, create a new file with the same in
# /etc/sysctl.d/ and put new settings there. To override
# only specific settings, add a file with a lexically later
# name in /etc/sysctl.d/ and put new settings there.
#
# For more information, see sysctl.conf(5) and sysctl.d(5).
Premiere chose à faire , c'est sauvegarder ce fichier (toujours à faire en root: d'ou le su -)
Pour rappel , le $ indique que tu est en user et le : # que tu es en root
Donc,
$ su -
# cp /etc/sysctl.conf /etc/sysctl.conf.original
comme cela tu pourras revenir en arrière facilement avec ce fichier sauvegardé. en faisant # cp /etc/sysctl.conf.original /etc/sysctl.conf

Maintenant tu peux faire la modif suivante si, en graphique tu n'arrives pas à trouver les bonnes cases à cocher.
en rajoutant à la fin du fichier /etc/sysctl.conf avec un copier/coller ou Ctrl+c puis Ctrl+v
$ su -
# nano /etc/sysctl.conf

# désactivation du support pour les interfaces actuelles
net.ipv6.conf.all.disable_ipv6 = 1
 
# désactivation du support de l’autoconfiguration
net.ipv6.conf.all.autoconf = 0
 
# désactivation du support par défaut pour les nouvelles interfaces
net.ipv6.conf.default.disable_ipv6 = 1
 
# et de l'autoconfiguration 
net.ipv6.conf.default.autoconf = 0
Pour valider tes modifs, il faut les sauvegarder en faisant: Ctrl+x et répondre par oui aux questions posées

ton fichier devrait ressembler à cela en refaisant un $ cat /etc/sysctl.conf

# sysctl settings are defined through files in
# /usr/lib/sysctl.d/, /run/sysctl.d/, and /etc/sysctl.d/.
#
# Vendors settings live in /usr/lib/sysctl.d/.
# To override a whole file, create a new file with the same in
# /etc/sysctl.d/ and put new settings there. To override
# only specific settings, add a file with a lexically later
# name in /etc/sysctl.d/ and put new settings there.
#
# For more information, see sysctl.conf(5) and sysctl.d(5).
# désactivation du support pour les interfaces actuelles
net.ipv6.conf.all.disable_ipv6 = 1
 
# désactivation du support de l’autoconfiguration
net.ipv6.conf.all.autoconf = 0
 
# désactivation du support par défaut pour les nouvelles interfaces
net.ipv6.conf.default.disable_ipv6 = 1
 
# et de l'autoconfiguration 
net.ipv6.conf.default.autoconf = 0
Bon dimanche
Bonjour antbel,

Merci beaucoup de toutes ces infos que je garde bien sous le coude du fait de la désactivation graphique.
Bon dimanche également .
Ici un petit 32° maxi prévu dans l'après-midi, autant dire presque frais ici. :pint:
Bonjour.
# systemctl daemon-reload
# systemctl start systemd-modules-load.service
Puis donne au forum le résultat de :
# systemctl status systemd-modules-load.service
tetedecrocro wrote:Bonjour.
# systemctl daemon-reload
# systemctl start systemd-modules-load.service
Puis donne au forum le résultat de :
# systemctl status systemd-modules-load.service
Bonsoir,
voilà le retour du status après le reload et le start >
● systemd-modules-load.service - Load Kernel Modules
   Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static; vendor preset: disabled)
   Active: active (exited) since Mon 2018-10-08 18:23:34 WEST; 9min ago
     Docs: man:systemd-modules-load.service(8)
           man:modules-load.d(5)
 Main PID: 526 (code=exited, status=0/SUCCESS)
    Tasks: 0 (limit: 4915)
   Memory: 0B
   CGroup: /system.slice/systemd-modules-load.service

oct. 08 18:23:34 saddak_msi systemd[1]: Started Load Kernel Modules.

Merci.
1 minute pour atteindre le mode graphique ça va. Ce n'est pas ce que tu constates ? Sur un Pentium G620, un disque green 5400rpm ça semble être même plutôt très bon.

Sinon rien d'anormal dans les logs. Quelques choses ne fonctionne pas?
madko wrote:1 minute pour atteindre le mode graphique ça va. Ce n'est pas ce que tu constates ? Sur un Pentium G620, un disque green 5400rpm ça semble être même plutôt très bon.

Sinon rien d'anormal dans les logs. Quelques choses ne fonctionne pas?

Bonsoir,
J'essayais juste àau début de chercher l'origine de ce foutu [Failed to start LoadKernel Modules] du démarrage qui est récurrent et j’avais donné le log du boot. Il a été question IPV6 mais pas de corrélation a priori, et vraisemblablement c'est dû à VM Virtualbox qu'est toujours en décalage avec les noyaux ou quelque chose de ce genre.

Merci.
Oui c'est un classique de virtualbox, rien a voir avec l'ipv6. Une petite recherche sur le forum tu verras que ça arrive très souvent, c'est même pour ça qu'on conseil en général d'autres produits.
@saddak

Tu as maintenant vérifié ta machine au reboot pour voir si tu retrouves Failed to start LoadKernel Modules ?
madko wrote:Oui c'est un classique de virtualbox, rien a voir avec l'ipv6. Une petite recherche sur le forum tu verras que ça arrive très souvent, c'est même pour ça qu'on conseil en général d'autres produits.

Est ce que VMware a moins de 'soucis'?

Merci