Salut la compagnie !!!

J'ai récemment acheté un portable ASUS UX305LA-FB095T.
Je lui ai collé F28 aux fesses et là je regarde un peu ce qui se passe avec dmesg juste au cas où et effectivement j'ai une erreur qui revient fréquemment : Erreur proc_thermal 0000:00:04.0: Unsupported event [0x84] 
ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[51975.368693] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[51975.394582] proc_thermal 0000:00:04.0: Unsupported event [0x84]
[51975.608541] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[51976.169052] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[51976.171898] ata1.00: configured for UDMA/133
[51976.182300] ata1.00: Enabling discard_zeroes_data
[51976.196369] PM: resume devices took 1.396 seconds
[51976.198025] OOM killer enabled.
[51976.198027] Restarting tasks ... 
[51976.212212] Bluetooth: hci0: read Intel version: 370810011003110e00
[51976.213247] done.
[51976.213519] thermal thermal_zone5: failed to read out thermal zone (-61)
[51976.213738] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[51976.369721] PM: suspend exit
[51976.385208] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[51976.492934] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[51976.537443] proc_thermal 0000:00:04.0: Unsupported event [0x84]
[51976.545964] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[51976.647198] Bluetooth: hci0: Intel firmware patch completed and activated
[51978.544509] proc_thermal 0000:00:04.0: Unsupported event [0x84]
[51980.208662] wlp2s0: authenticate with e4:3e:d7:aa:80:ab
[51980.214193] wlp2s0: send auth to e4:3e:d7:aa:80:ab (try 1/3)
[51980.217261] wlp2s0: authenticated
[51980.218385] wlp2s0: associate with e4:3e:d7:aa:80:ab (try 1/3)
[51980.226681] wlp2s0: RX AssocResp from e4:3e:d7:aa:80:ab (capab=0x411 status=0 aid=1)
[51980.228517] wlp2s0: associated
[51980.269465] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[62283.590057] asus_wmi: Unknown key cf pressed
[62284.429530] proc_thermal 0000:00:04.0: Unsupported event [0x84]
[62335.888446] proc_thermal 0000:00:04.0: Unsupported event [0x84]
[62347.111277] proc_thermal 0000:00:04.0: Unsupported event [0x84]
[101670.871019] wlp2s0: deauthenticating from e4:3e:d7:aa:80:ab by local choice (Reason: 3=DEAUTH_LEAVING)
[101670.929237] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[101671.298122] PM: suspend entry (deep)
[101671.298125] PM: Syncing filesystems ... done.
[101671.319291] Freezing user space processes ... (elapsed 0.002 seconds) done.
[101671.322106] OOM killer disabled.
[101671.322106] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[101671.323561] Suspending console(s) (use no_console_suspend to debug)
[101671.333391] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[101671.334428] sd 0:0:0:0: [sda] Stopping disk
[101671.841377] PM: suspend devices took 0.518 seconds
[101671.854064] ACPI: EC: interrupt blocked
[101671.880478] ACPI: Preparing to enter system sleep state S3
[101671.891007] ACPI: EC: event blocked
[101671.891007] ACPI: EC: EC stopped
[101671.891008] PM: Saving platform NVS memory
[101671.891136] Disabling non-boot CPUs ...
[101671.897955] smpboot: CPU 1 is now offline
[101671.912309] smpboot: CPU 2 is now offline
[101671.919783] smpboot: CPU 3 is now offline
[101671.926861] ACPI: Low-level resume complete
[101671.927018] ACPI: EC: EC started
[101671.927021] PM: Restoring platform NVS memory
[101671.937475] Enabling non-boot CPUs ...
[101671.937625] x86: Booting SMP configuration:
[101671.937631] smpboot: Booting Node 0 Processor 1 APIC 0x2
[101671.948116]  cache: parent cpu1 should not be sleeping
[101671.948967] CPU1 is up
[101671.949075] smpboot: Booting Node 0 Processor 2 APIC 0x1
[101671.951916]  cache: parent cpu2 should not be sleeping
[101671.952645] CPU2 is up
[101671.952730] smpboot: Booting Node 0 Processor 3 APIC 0x3
[101671.955408]  cache: parent cpu3 should not be sleeping
[101671.956172] CPU3 is up
[101671.973810] ACPI: Waking up from system sleep state S3
[101672.033230] ACPI: EC: interrupt unblocked
[101672.060489] ACPI: EC: event unblocked
[101672.060500] usb usb1: root hub lost power or was reset
[101672.060510] usb usb2: root hub lost power or was reset
[101672.061393] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[101672.062913] sd 0:0:0:0: [sda] Starting disk
[101672.371456] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[101672.391638] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
[101672.424891] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[101672.631607] usb 1-5: reset high-speed USB device number 4 using xhci_hcd
[101672.648510] [b]proc_thermal 0000:00:04.0: Unsupported event [0x84][/b]
[101672.871610] usb 1-1: reset full-speed USB device number 2 using xhci_hcd
[101673.549351] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[101673.552205] ata1.00: configured for UDMA/133
[101673.562711] ata1.00: Enabling discard_zeroes_data
[101673.566356] PM: resume devices took 1.507 seconds
[101673.567464] OOM killer enabled.
[101673.567465] Restarting tasks ... done.
[101673.577173] thermal thermal_zone5: failed to read out thermal zone (-61)
[101673.581976] Bluetooth: hci0: read Intel version: 370810011003110e00
[101673.581982] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[101673.682227] PM: suspend exit
[101673.700594] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[101673.816186] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[101673.817618] proc_thermal 0000:00:04.0: Unsupported event [0x84]
[101673.938876] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[101673.981014] Bluetooth: hci0: Intel firmware patch completed and activated
[101674.009700] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[101677.628122] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[101678.823503] wlp2s0: authenticate with e4:3e:d7:aa:80:ab
[101678.830463] wlp2s0: send auth to e4:3e:d7:aa:80:ab (try 1/3)
[101678.838029] wlp2s0: authenticated
[101678.839388] wlp2s0: associate with e4:3e:d7:aa:80:ab (try 1/3)
[101678.843760] wlp2s0: RX AssocResp from e4:3e:d7:aa:80:ab (capab=0x411 status=0 aid=1)
[101678.845406] wlp2s0: associated
[101678.893257] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[104447.886614] asus_wmi: Unknown key cf pressed
[104448.690045] proc_thermal 0000:00:04.0: Unsupported event [0x84]
[104461.973824] input: 04:52:C7:EF:43:8F as /devices/virtual/input/input85
[105460.935457] proc_thermal 0000:00:04.0: Unsupported event [0x84]
[105479.049535] proc_thermal 0000:00:04.0: Unsupported event [0x84]
[105494.115545] proc_thermal 0000:00:04.0: Unsupported event [0x84]
Ca parait parler de température proc' alors voici ce que j'obtiens avec sensors :
iwlwifi-virtual-0
Adapter: Virtual device
temp1:        +45.0°C  

asus-isa-0000
Adapter: ISA adapter
cpu_fan:     2700 RPM
temp1:        +51.0°C  

acpitz-virtual-0
Adapter: Virtual device
temp1:        +51.0°C  (crit = +108.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +52.0°C  (high = +105.0°C, crit = +105.0°C)
Core 0:        +51.0°C  (high = +105.0°C, crit = +105.0°C)
Core 1:        +52.0°C  (high = +105.0°C, crit = +105.0°C)

pch_wildcat_point-virtual-0
Adapter: Virtual device
temp1:        +49.5°C
Une petite idée ?
loloboua wrote:Une petite idée ?
Oui: il y a suffisamment de soucis réels pour ne pas en inventer. Tu n'as aucun dysfonctionnement apparemment ? S'il s'en produit alors viens dire lesquels. Entretemps, have fun.
Trop en voir c'est pas bien... Le mieux c'est de tout cacher... (maxime des politicards conspirationnistes de tout poils)